feat(tci): read the radio's declared format, and record a test WAV
The SunSDR announces its own stream at connect — audio_stream_sample_type:float32 and audio_stream_channels:2 — and both were being logged as unhandled while the code worked the format out from frame arithmetic. The declaration is better evidence and arrives before the first frame; the arithmetic stays as the check on it. The channel count now drives the mix-down instead of an assumed stereo. Adds a ten-second test recording, written as a WAV beside the QSO recordings. Counting frames proves a socket is delivering bytes; it says nothing about whether those bytes are the receiver's audio, at the right rate, in the right order. A stream decoded with the width wrong or the samples misaligned counts exactly as well as a correct one and sounds like a fan — so the test is a file the operator can play, the same way the CW decoder was settled on the air rather than on a spectrogram. The file is written at the rate the RADIO reported, not a constant: a recording at the wrong rate plays at the wrong speed, which is the one fault that would be blamed on the decoding.
This commit is contained in:
@@ -58,7 +58,7 @@ import {
|
||||
GetFolderSync, SaveFolderSync, PickFolderSyncFolder, GetFolderSyncStatus, SyncFolderNow,
|
||||
GetRelayAuto, SaveRelayAuto, GetStationDevices,
|
||||
GetAwardDefs, GetTrackedAwards, SaveTrackedAwards,
|
||||
GetBandOpenSettings, SaveBandOpenSettings, GetGridScopeSettings, SaveGridScopeSettings, GetPSKReporterStatus, GetChaseNewGrids, SetChaseNewGrids, GetChaseNew, SetChaseNew, GetGridCacheStatus, GetLinkedAmps, SetLinkedAmps, GetSpotTTLMinutes, SetSpotTTLMinutes, GetSpotMax, SetSpotMax, StartTCIAudio, StopTCIAudio, GetTCIAudioStatus,
|
||||
GetBandOpenSettings, SaveBandOpenSettings, GetGridScopeSettings, SaveGridScopeSettings, GetPSKReporterStatus, GetChaseNewGrids, SetChaseNewGrids, GetChaseNew, SetChaseNew, GetGridCacheStatus, GetLinkedAmps, SetLinkedAmps, GetSpotTTLMinutes, SetSpotTTLMinutes, GetSpotMax, SetSpotMax, StartTCIAudio, StopTCIAudio, GetTCIAudioStatus, RecordTCIAudio,
|
||||
} from '../../wailsjs/go/main/App';
|
||||
import type { profile as profileModels } from '../../wailsjs/go/models';
|
||||
import type { LookupSettingsForm, StationSettingsForm, ListsSettingsForm, ModePresetForm } from '@/types';
|
||||
@@ -1947,6 +1947,8 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
|
||||
// that asks the backend twice a second for a stream nobody started is work
|
||||
// done for nothing.
|
||||
const [tciAudio, setTciAudio] = useState<any>({ running: false, sample_rate: 0, frames: 0, peak_db: -99 });
|
||||
const [tciRecBusy, setTciRecBusy] = useState(false);
|
||||
const [tciRecPath, setTciRecPath] = useState('');
|
||||
useEffect(() => {
|
||||
if (!tciAudio.running) return;
|
||||
const id = window.setInterval(() => { GetTCIAudioStatus().then(setTciAudio).catch(() => {}); }, 500);
|
||||
@@ -6577,6 +6579,25 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
|
||||
</span>
|
||||
)}
|
||||
</div>
|
||||
{/* The test that actually settles it. Frames arriving proves a
|
||||
socket is delivering bytes; it says nothing about whether those
|
||||
bytes are the receiver's audio, at the right rate, in the right
|
||||
order. A file the operator can PLAY says all three at once. */}
|
||||
{tciAudio.running && (
|
||||
<div className="flex items-center gap-3 flex-wrap">
|
||||
<Button variant="outline" size="sm" className="h-8" disabled={tciRecBusy}
|
||||
onClick={() => {
|
||||
setTciRecBusy(true); setTciRecPath('');
|
||||
RecordTCIAudio(10)
|
||||
.then((p: string) => setTciRecPath(p))
|
||||
.catch((e: any) => setTciAudio((s: any) => ({ ...s, last_err: String(e?.message ?? e) })))
|
||||
.finally(() => setTciRecBusy(false));
|
||||
}}>
|
||||
{tciRecBusy ? t('aud.tciRecBusy') : t('aud.tciRec')}
|
||||
</Button>
|
||||
{!!tciRecPath && <span className="text-[11px] font-mono text-muted-foreground truncate">{tciRecPath}</span>}
|
||||
</div>
|
||||
)}
|
||||
{!!tciAudio.last_err && <p className="text-[11px] text-danger">{tciAudio.last_err}</p>}
|
||||
<p className="text-[11px] text-muted-foreground">{t('aud.tciHint')}</p>
|
||||
</div>
|
||||
|
||||
@@ -494,7 +494,7 @@ const en: Dict = {
|
||||
'aud.noneDefault': '— none / system default —', 'aud.defaultTag': '(default)',
|
||||
'aud.fromRadioShort': 'From Radio', 'aud.toRadioShort': 'To Radio', 'aud.explainFrom': '= what you receive (used by the QSO recorder).', 'aud.explainTo': '= where voice-keyer messages are transmitted.',
|
||||
'aud.monitorTitle': "Hear the rig's RX audio (From Radio) through your Listening device", 'aud.listenRadio': '▶ Listen to radio', 'aud.stopListening': '■ Stop listening',
|
||||
'aud.monitorOn': 'RX monitor running — From Radio → Listening device.', 'aud.tciTitle': 'SunSDR receive audio over TCI (experimental)', 'aud.tciStart': 'Open the stream', 'aud.tciStop': 'Close the stream', 'aud.tciSilent': 'silent', 'aud.tciHint': 'Takes the receive audio straight from the radio over TCI, with no virtual audio cable and no second sound card. Receive only for now — the voice keyer still uses the devices above. Requires the CAT backend to be TCI.', 'aud.monitorHint': 'Live-monitor the rig here (USB codec now; network audio later).',
|
||||
'aud.monitorOn': 'RX monitor running — From Radio → Listening device.', 'aud.tciTitle': 'SunSDR receive audio over TCI (experimental)', 'aud.tciStart': 'Open the stream', 'aud.tciStop': 'Close the stream', 'aud.tciRec': 'Record 10 s to listen', 'aud.tciRecBusy': 'Recording…', 'aud.tciSilent': 'silent', 'aud.tciHint': 'Takes the receive audio straight from the radio over TCI, with no virtual audio cable and no second sound card. Receive only for now — the voice keyer still uses the devices above. Requires the CAT backend to be TCI.', 'aud.monitorHint': 'Live-monitor the rig here (USB codec now; network audio later).',
|
||||
'aud.txTitle': 'Key PTT and pipe your live mic into the rig (To Radio device)', 'aud.talkRadio': '🎙 Talk to radio (TX)', 'aud.stopTalk': '■ Stop talking (TX)',
|
||||
'aud.txOn': 'TRANSMITTING — mic → To Radio, PTT keyed. Click to stop.', 'aud.txHint': 'Live mic → rig with PTT (USB now; network TX later).',
|
||||
'aud.recorder': 'QSO recorder', 'aud.recordEvery': 'Record every QSO to an audio file (From Radio + your mic)', 'aud.recFolder': 'Recordings folder', 'aud.browse': 'Browse…',
|
||||
@@ -962,7 +962,7 @@ const fr: Dict = {
|
||||
'aud.noneDefault': '— aucun / défaut système —', 'aud.defaultTag': '(défaut)',
|
||||
'aud.fromRadioShort': 'Depuis la radio', 'aud.toRadioShort': 'Vers la radio', 'aud.explainFrom': "= ce que vous recevez (utilisé par l'enregistreur de QSO).", 'aud.explainTo': '= où sont émis les messages du manipulateur vocal.',
|
||||
'aud.monitorTitle': "Écouter l'audio RX du poste (Depuis la radio) sur votre périphérique d'écoute", 'aud.listenRadio': '▶ Écouter la radio', 'aud.stopListening': "■ Arrêter l'écoute",
|
||||
'aud.monitorOn': "Écoute RX active — Depuis la radio → périphérique d'écoute.", 'aud.tciTitle': 'Audio de réception SunSDR par TCI (expérimental)', 'aud.tciStart': 'Ouvrir le flux', 'aud.tciStop': 'Fermer le flux', 'aud.tciSilent': 'silence', 'aud.tciHint': "Prend l'audio de réception directement sur la radio via TCI, sans câble audio virtuel ni seconde carte son. Réception seulement pour l'instant — le manipulateur vocal utilise toujours les périphériques ci-dessus. Nécessite le CAT réglé sur TCI.", 'aud.monitorHint': "Écoute directe du poste (codec USB pour l'instant ; audio réseau plus tard).",
|
||||
'aud.monitorOn': "Écoute RX active — Depuis la radio → périphérique d'écoute.", 'aud.tciTitle': 'Audio de réception SunSDR par TCI (expérimental)', 'aud.tciStart': 'Ouvrir le flux', 'aud.tciStop': 'Fermer le flux', 'aud.tciRec': 'Enregistrer 10 s pour écoute', 'aud.tciRecBusy': 'Enregistrement…', 'aud.tciSilent': 'silence', 'aud.tciHint': "Prend l'audio de réception directement sur la radio via TCI, sans câble audio virtuel ni seconde carte son. Réception seulement pour l'instant — le manipulateur vocal utilise toujours les périphériques ci-dessus. Nécessite le CAT réglé sur TCI.", 'aud.monitorHint': "Écoute directe du poste (codec USB pour l'instant ; audio réseau plus tard).",
|
||||
'aud.txTitle': 'Activer le PTT et envoyer votre micro vers le poste (périphérique « Vers la radio »)', 'aud.talkRadio': '🎙 Parler à la radio (TX)', 'aud.stopTalk': '■ Arrêter de parler (TX)',
|
||||
'aud.txOn': 'ÉMISSION — micro → Vers la radio, PTT activé. Cliquez pour arrêter.', 'aud.txHint': "Micro direct → poste avec PTT (USB pour l'instant ; TX réseau plus tard).",
|
||||
'aud.recorder': 'Enregistreur de QSO', 'aud.recordEvery': 'Enregistrer chaque QSO dans un fichier audio (Depuis la radio + votre micro)', 'aud.recFolder': 'Dossier des enregistrements', 'aud.browse': 'Parcourir…',
|
||||
|
||||
Reference in New Issue
Block a user