feat(flex): chase a split pile-up on the skimmer's report marker
Working a DXpedition split means guessing where it listens. The useful information is not the callsign the DX answered but the FREQUENCY that station was calling on, and a CW skimmer already marks it: SDC posts each decoded report to the panadapter as a spot. Those spots reach OpsLog through the radio's spot feed. On a marker, the TRANSMIT slice moves there plus a signed offset; the receive slice never moves, because losing the DX is worse than missing a call. The marker text is a setting -- it is chosen in SDC by the operator, so any constant here would be wrong for whoever chose otherwise -- and the switch is a button beside SPLIT, since it is turned on when a DXpedition appears and off when it is worked. Moves are throttled and ignore a marker landing where the slice already is: a busy pile-up produces several reports a second and the slice would otherwise never be anywhere long enough to call. The spot feed is now subscribed to unconditionally. It was tied to OpsLog's own spot overlay, so an operator running SDC with the overlay off received nothing -- the reason no foreign spot was ever logged. The connect-time 'spot clear' stays behind the overlay flag: it wipes every spot on the radio, a skimmer's included.
This commit is contained in:
@@ -8,6 +8,7 @@ import {
|
||||
GetTunerGeniusStatus, GetTunerGeniusSettings,
|
||||
GetAmpStatuses, AmpOperate, AmpPower, AmpPowerLevel,
|
||||
FlexSetAGCMode, FlexSetAGCThreshold, FlexSetAudioLevel, FlexSetMute, FlexSetRXAntenna, FlexSetTXAntenna, FlexSetSplit, FlexSetActiveSlice, FlexSetTXSlice,
|
||||
GetFlexRSTChase, SaveFlexRSTChase, SetFlexRSTChaseEnabled,
|
||||
FlexSetRIT, FlexSetRITFreq, FlexSetXIT, FlexSetXITFreq,
|
||||
FlexSetNB, FlexSetNBLevel, FlexSetNR, FlexSetNRLevel, FlexSetANF, FlexSetANFLevel,
|
||||
FlexSetLMSNR, FlexSetLMSNRLevel, FlexSetLMSANF, FlexSetLMSANFLevel,
|
||||
@@ -304,6 +305,17 @@ function powerLevelLabel(pl?: string): string {
|
||||
// host can keep the WinKeyer (which actually sends the macros) in sync.
|
||||
export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number) => void; onReportRST?: (rst: string) => void } = {}) {
|
||||
const { t } = useI18n();
|
||||
// Split-pile-up chaser (see flexrstchase.go). Held here so the button can
|
||||
// paint its state without polling the backend for it.
|
||||
const [rstChase, setRstChase] = useState<{ enabled: boolean; markers: string; offset_hz: number; split_only: boolean }>(
|
||||
{ enabled: false, markers: '599', offset_hz: 0, split_only: true });
|
||||
const [rstChaseOffsetText, setRstChaseOffsetText] = useState('0');
|
||||
useEffect(() => {
|
||||
GetFlexRSTChase().then((c: any) => {
|
||||
if (!c) return;
|
||||
setRstChase(c); setRstChaseOffsetText(String(c.offset_hz ?? 0));
|
||||
}).catch(() => {});
|
||||
}, []);
|
||||
const [st, setSt] = useState<FlexState>(ZERO);
|
||||
// Extra/"advanced" DSP rows (WNB + the SmartSDR v4 NRL/NRS/NRF/ANFL/AI-FFT
|
||||
// block) collapse behind a button so the RECEIVE card doesn't grow tall — only
|
||||
@@ -652,6 +664,36 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
|
||||
st.split ? 'bg-info text-info-foreground border-info shadow-[0_0_12px] shadow-info/50' : 'bg-card text-info border-info hover:bg-info-muted')}>
|
||||
SPLIT
|
||||
</button>
|
||||
{/* The split chaser. On the panel and not in a settings page:
|
||||
it is switched on when a DXpedition appears and off when it is
|
||||
in the log, which is done mid-QSO with one hand. The offset
|
||||
sits beside it because it is the one number retuned while
|
||||
chasing — everything else about the feature is configured once. */}
|
||||
<button type="button" disabled={off}
|
||||
title={t('flxp.rstChaseHint', { m: rstChase.markers })}
|
||||
onClick={() => { const on = !rstChase.enabled; setRstChase({ ...rstChase, enabled: on }); SetFlexRSTChaseEnabled(on).catch(() => {}); }}
|
||||
className={cn('px-3 py-1.5 rounded-lg text-sm font-extrabold tracking-wide border-2 transition-all disabled:opacity-30',
|
||||
rstChase.enabled ? 'bg-success text-success-foreground border-success shadow-[0_0_12px] shadow-success/50' : 'bg-card text-success border-success hover:bg-success-muted')}>
|
||||
{rstChase.markers.split(',')[0].trim() || '599'}
|
||||
</button>
|
||||
{rstChase.enabled && (
|
||||
<label className="flex items-center gap-1 text-[11px] text-muted-foreground whitespace-nowrap">
|
||||
{t('flxp.rstChaseOffset')}
|
||||
<input type="number" step={10} value={rstChaseOffsetText}
|
||||
onChange={(e) => setRstChaseOffsetText(e.target.value)}
|
||||
onBlur={() => {
|
||||
// Kept as text while typing: normalising every keystroke
|
||||
// makes a minus sign impossible to enter.
|
||||
const n = Math.round(Number(rstChaseOffsetText));
|
||||
const v = Number.isFinite(n) ? n : 0;
|
||||
setRstChaseOffsetText(String(v));
|
||||
const next = { ...rstChase, offset_hz: v };
|
||||
setRstChase(next); SaveFlexRSTChase(next as any).catch(() => {});
|
||||
}}
|
||||
className="w-16 h-6 rounded border border-input bg-background px-1 text-[11px] font-mono" />
|
||||
Hz
|
||||
</label>
|
||||
)}
|
||||
{st.split && !!st.tx_freq_hz && (
|
||||
<span className="text-[11px] font-mono text-muted-foreground whitespace-nowrap">
|
||||
TX {(st.tx_freq_hz / 1e6).toFixed(3)}
|
||||
|
||||
@@ -426,7 +426,7 @@ const en: Dict = {
|
||||
'tgp.online': 'online', 'tgp.offline': 'offline', 'tgp.close': 'Close', 'tgp.connecting': 'Connecting…', 'tgp.swr': 'SWR', 'tgp.power': 'Fwd power', 'tgp.tune': 'Tune', 'tgp.tuning': 'Tuning…', 'tgp.tuneHint': 'Start an automatic tuning cycle on the active channel — key the rig into a carrier so the tuner can measure SWR', 'tgp.bypass': 'Bypass', 'tgp.bypassHint': 'Toggle global bypass — route the antenna straight through, tuner out of line', 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Toggle Operate / Standby',
|
||||
'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Channel {letter} — active', 'tgp.chSelect': 'Make channel {letter} active', 'tgp.chActiveTag': 'active', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypassed', 'tgp.inLine': 'In line',
|
||||
'flxp.ritHint': 'RIT — shifts your RECEIVE frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.', 'flxp.xitHint': 'XIT — shifts your TRANSMIT frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.',
|
||||
'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
|
||||
'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.rstChaseHint': 'Chase the pile-up: when the CW skimmer marks a report ({m}) on the panadapter, move the TRANSMIT slice there — that is where the DX was listening a second ago. The receive slice never moves.', 'flxp.rstChaseOffset': 'offset', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
|
||||
'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.atuTune': 'TUNE', 'flxp.atuTuneHint': 'Start a tuning cycle on the built-in ATU. The radio keys a carrier itself to measure the match.', 'flxp.atuBypass': 'BYPASS', 'flxp.atuBypassHint': 'Take the ATU out of line (straight through).', 'flxp.atuMem': 'MEM', 'flxp.atuMemHint': 'Reuse the stored tuning solution for this frequency instead of tuning again.', 'flxp.atuIdle': 'not tuned', 'flxp.atuTuning': 'tuning…', 'flxp.atuOk': 'tuned', 'flxp.atuFail': 'TUNE FAILED', 'flxp.atuBypassed': 'bypassed', 'flxp.atuAborted': 'aborted', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER', 'flxp.outputPower': 'OUTPUT POWER', 'flxp.speOffline': 'SPE offline', 'flxp.acomOffline': 'ACOM offline', 'flxp.ampPick': 'Choose which amplifier this card shows', 'flxp.dspV4Hint': 'SmartSDR v4 DSP (8000/Aurora series)', 'flxp.daxHint': 'DAX as the transmit audio source (SmartSDR transmit-bar DAX button) — for WSJT-X & co', 'flxp.rnnHint': 'RNN — AI noise reduction (on/off)', 'flxp.anftHint': 'ANFT — FFT-based automatic notch filter (on/off)', 'flxp.dspNoise': 'Noise', 'flxp.dspMore': 'Show/hide advanced DSP (WNB, v4 NR/notch)',
|
||||
'icmp.spectrum': 'Spectrum', 'icmp.scopeFixed': 'Fixed — double-click / wheel to tune', 'icmp.scopeCenter': 'Center — follows VFO', 'icmp.scopeOff': 'Scope off', 'icmp.scopePanDown': 'Shift scope −50 kHz', 'icmp.scopePanUp': 'Shift scope +50 kHz', 'icmp.scopeCenterVfo': 'Center scope on the current frequency (±50 kHz)', 'icmp.notConnected': "Icom not connected. Enable the Icom CI-V backend in Settings → CAT and connect the radio's USB port.", 'icmp.refresh': 'Refresh', 'icmp.meters': 'Meters', 'icmp.transmit': 'Transmit', 'icmp.power': 'Power', 'icmp.mic': 'Mic', 'icmp.receive': 'Receive', 'icmp.preamp': 'Preamp', 'icmp.filter': 'Filter', 'icmp.noiseNotch': 'Noise / Notch', 'icmp.autoNotch': 'Auto notch filter', 'icmp.apf': 'Audio peak filter (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Wheel or ± to shift · Ctrl+←/→ shifts RIT when active', 'icmp.bandsAntenna': 'Bands & Antenna', 'icmp.bandCurrent': 'The rig is on {b} m', 'icmp.antenna': 'Antenna', 'icmp.passband': 'Passband / Notch', 'icmp.pbtCenter': 'Center PBT', 'icmp.manualNotch': 'Manual notch — MN on, then set position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Power the radio ON (boots ~15 s)', 'icmp.powerOffHint': 'Power the radio OFF', 'icmp.powerOffConfirm': 'Switch the radio OFF?',
|
||||
'rst.clickToFill': 'Click to set RST tx from the signal',
|
||||
@@ -898,7 +898,7 @@ const fr: Dict = {
|
||||
'tgp.online': 'en ligne', 'tgp.offline': 'hors ligne', 'tgp.close': 'Fermer', 'tgp.connecting': 'Connexion…', 'tgp.swr': 'ROS', 'tgp.power': 'Puiss. directe', 'tgp.tune': 'Accord', 'tgp.tuning': 'Accord…', 'tgp.tuneHint': "Lancer un cycle d'accord automatique sur le canal actif — passe la radio en porteuse pour que le coupleur mesure le ROS", 'tgp.bypass': 'Bypass', 'tgp.bypassHint': "Basculer le bypass global — antenne en direct, coupleur hors ligne", 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Basculer Operate / Standby',
|
||||
'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Canal {letter} — actif', 'tgp.chSelect': 'Activer le canal {letter}', 'tgp.chActiveTag': 'actif', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypass', 'tgp.inLine': 'En ligne',
|
||||
'flxp.ritHint': "RIT — décale uniquement ta fréquence de RÉCEPTION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.", 'flxp.xitHint': "XIT — décale uniquement ta fréquence d'ÉMISSION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.",
|
||||
'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
|
||||
'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.rstChaseHint': "Chasser le pile-up : quand le skimmer CW marque un report ({m}) sur le panadapter, déplacer la slice d'ÉMISSION dessus — c'est là que le DX écoutait il y a une seconde. La slice de réception ne bouge jamais.", 'flxp.rstChaseOffset': 'décalage', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
|
||||
'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.atuTune': 'ACCORD', 'flxp.atuTuneHint': "Lance un cycle d'accord sur le coupleur intégré. La radio émet elle-même une porteuse pour mesurer l'adaptation.", 'flxp.atuBypass': 'BYPASS', 'flxp.atuBypassHint': 'Sort le coupleur de la ligne (passage direct).', 'flxp.atuMem': 'MEM', 'flxp.atuMemHint': "Réutilise l'accord mémorisé pour cette fréquence au lieu de refaire un cycle.", 'flxp.atuIdle': 'non accordé', 'flxp.atuTuning': 'accord en cours…', 'flxp.atuOk': 'accordé', 'flxp.atuFail': 'ÉCHEC ACCORD', 'flxp.atuBypassed': 'contourné', 'flxp.atuAborted': 'interrompu', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR', 'flxp.outputPower': 'PUISSANCE DE SORTIE', 'flxp.speOffline': 'SPE hors ligne', 'flxp.acomOffline': 'ACOM hors ligne', 'flxp.ampPick': 'Choisir quel amplificateur cette carte affiche', 'flxp.dspV4Hint': 'DSP SmartSDR v4 (séries 8000/Aurora)', 'flxp.daxHint': "DAX comme source audio d'émission (bouton DAX du bandeau transmit de SmartSDR) — pour WSJT-X & co", 'flxp.rnnHint': 'RNN — réduction de bruit par IA (on/off)', 'flxp.anftHint': 'ANFT — filtre notch automatique FFT (on/off)', 'flxp.dspNoise': 'Bruit', 'flxp.dspMore': 'Afficher/masquer le DSP avancé (WNB, NR/notch v4)',
|
||||
'icmp.spectrum': 'Spectre', 'icmp.scopeFixed': 'Fixe — double-clic / molette pour accorder', 'icmp.scopeCenter': 'Centré — suit le VFO', 'icmp.scopeOff': 'Scope éteint', 'icmp.scopePanDown': 'Décaler le scope −50 kHz', 'icmp.scopePanUp': 'Décaler le scope +50 kHz', 'icmp.scopeCenterVfo': 'Centrer le scope sur la fréquence actuelle (±50 kHz)', 'icmp.notConnected': 'Icom non connecté. Active le backend CI-V Icom dans Réglages → CAT et connecte le port USB de la radio.', 'icmp.refresh': 'Rafraîchir', 'icmp.meters': 'Mesures', 'icmp.transmit': 'Émission', 'icmp.power': 'Puissance', 'icmp.mic': 'Micro', 'icmp.receive': 'Réception', 'icmp.preamp': 'Préampli', 'icmp.filter': 'Filtre', 'icmp.noiseNotch': 'Bruit / Notch', 'icmp.autoNotch': 'Filtre notch auto', 'icmp.apf': 'Filtre de pic audio (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Molette ou ± pour décaler · Ctrl+←/→ décale le RIT si actif', 'icmp.bandsAntenna': 'Bandes & Antenne', 'icmp.bandCurrent': 'Le poste est sur {b} m', 'icmp.antenna': 'Antenne', 'icmp.passband': 'Passe-bande / Notch', 'icmp.pbtCenter': 'Centrer PBT', 'icmp.manualNotch': 'Notch manuel — active MN, puis règle la position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Allumer la radio (démarre en ~15 s)', 'icmp.powerOffHint': 'Éteindre la radio', 'icmp.powerOffConfirm': 'Éteindre la radio ?',
|
||||
'rst.clickToFill': 'Clic pour remplir le RST tx depuis le signal',
|
||||
|
||||
Reference in New Issue
Block a user