feat: ATU controls in the FlexRadio panel

The backend already parsed the atu object and exposed ATUStart / ATUBypass /
SetATUMemories through the Flex controller and the App bindings — only the UI
was missing, so the radio's own tuner was the one thing on the panel you still
had to reach SmartSDR for.

Placed under TUNE, which is the order of operations: the tuner needs a carrier
to measure against.

The status is decoded into words rather than shown raw. That is the point of the
block: TUNE_FAIL and "never tuned" leave the radio looking identical on its own
front panel, and the operator transmits into a bad match either way. Failed is
red, tuning amber, tuned green.

changelog.json

@@ -12,7 +12,8 @@
       "Bulk edit: fixed \"field is not bulk-editable\" on the QRZ.com received status and the confirmation dates added in 0.21.6 — they were declared in the wrong place and refused at Apply. Bulk-editing State and County, offered since the start, was refused the same way and now works.",
       "QRZ.com confirmation download: the whole logbook was requested every time, which QRZ cuts short on a large log — the read stopped two thirds of the way through and the rest was never seen. Only the window is requested now. And the last-download date is no longer moved when the download was incomplete: it used to advance over records that had never been read, which skipped them for good.",
       "The callsign in the top bar is now the station switcher: click it and pick a profile to activate it. Managing profiles is still there, at the bottom of the list.",
-      "The UTC clock moved from the top bar to the status bar at the bottom, beside the database."
+      "The UTC clock moved from the top bar to the status bar at the bottom, beside the database.",
+      "FlexRadio panel: the built-in ATU is now controllable — Tune, Bypass, memories, and the tuner state in words (tuning, tuned, TUNE FAILED…), because a failed tune and one that never ran look identical otherwise."
     ],
     "fr": [
       "Le constructeur de filtres reprend les mêmes noms de champs de confirmation que l'édition en lot, gagne le statut de réception QRZ.com manquant, et permet de filtrer sur les dates d'envoi et de réception (avant / après).",
@@ -24,7 +25,8 @@
       "Édition en lot : correction du refus « field is not bulk-editable » sur le statut de réception QRZ.com et les dates de confirmation ajoutées en 0.21.6 — ils étaient déclarés au mauvais endroit et rejetés au moment d'appliquer. L'édition en lot de State et County, proposée depuis toujours, était refusée de la même façon et fonctionne désormais.",
       "Téléchargement des confirmations QRZ.com : le carnet entier était demandé à chaque fois, ce que QRZ tronque sur un grand log — la lecture s'arrêtait aux deux tiers et le reste n'était jamais vu. Seule la fenêtre est désormais demandée. Et la date du dernier téléchargement n'avance plus lorsque le téléchargement est incomplet : elle passait par-dessus des enregistrements jamais lus, qui étaient alors ignorés définitivement.",
       "L'indicatif en haut de la fenêtre est désormais le sélecteur de station : un clic, on choisit un profil et il devient actif. La gestion des profils reste accessible, en bas de la liste.",
-      "L'horloge UTC est passée de la barre du haut à la barre d'état en bas, à côté de la base de données."
+      "L'horloge UTC est passée de la barre du haut à la barre d'état en bas, à côté de la base de données.",
+      "Panneau FlexRadio : le coupleur intégré est désormais pilotable — Accord, Bypass, mémoires, et l'état du coupleur en clair (accord en cours, accordé, ÉCHEC ACCORD…), car sans ça un accord raté et un accord jamais lancé se ressemblent."
     ]
   },
   {

frontend/src/components/FlexPanel.tsx

@@ -1,7 +1,7 @@
 import { useEffect, useRef, useState } from 'react';
 import { Radio, Zap, Power, AudioLines, Flame, Gauge, Volume2, VolumeX, ChevronDown, SlidersHorizontal } from 'lucide-react';
 import {
-  GetFlexState, FlexSetPower, FlexSetTunePower, FlexTune, FlexSetVox, FlexSetVoxLevel, FlexSetVoxDelay,
+  GetFlexState, FlexATUStart, FlexATUBypass, FlexSetATUMemories, FlexSetPower, FlexSetTunePower, FlexTune, FlexSetVox, FlexSetVoxLevel, FlexSetVoxDelay,
   FlexSetProcessor, FlexSetProcessorLevel, FlexSetMon, FlexSetMonLevel, FlexSetMic,
   FlexMox, FlexAmpOperate,
   GetPGXLStatus, PGXLSetFanMode,
@@ -125,8 +125,8 @@ function Segmented({ value, options, onChange, disabled }: {
 }
 
 // Chip — a compact on/off pill (NB/NR/ANF/VOX/MON…).
-function Chip({ on, onClick, label, disabled, accent = 'emerald' }: {
+function Chip({ on, onClick, label, disabled, accent = 'emerald', title }: {
-  on: boolean; onClick: () => void; label: string; disabled?: boolean; accent?: 'emerald' | 'violet' | 'cyan' | 'amber';
+  on: boolean; onClick: () => void; label: string; disabled?: boolean; accent?: 'emerald' | 'violet' | 'cyan' | 'amber'; title?: string;
 }) {
   const onCls = {
     emerald: 'bg-success border-success text-success-foreground',
@@ -135,7 +135,7 @@ function Chip({ on, onClick, label, disabled, accent = 'emerald' }: {
     amber: 'bg-warning border-warning text-warning-foreground',
   }[accent];
   return (
-    <button type="button" onClick={onClick} disabled={disabled}
+    <button type="button" onClick={onClick} disabled={disabled} title={title}
       className={cn(
         // min width (not fixed) so a longer label like STONE keeps symmetric
         // padding instead of overflowing; short labels (NB/NR/APF) stay aligned.
@@ -146,6 +146,37 @@ function Chip({ on, onClick, label, disabled, accent = 'emerald' }: {
   );
 }
 
+// SmartSDR reports the tuner as an enum. It is worth decoding rather than
+// showing raw: TUNE_FAIL and "never tuned" both leave the radio looking normal,
+// and the operator transmits into a bad match either way.
+function atuLabel(status: string | undefined, t: (k: string) => string): string {
+  switch ((status || '').toUpperCase()) {
+    case 'TUNE_IN_PROGRESS':   return t('flxp.atuTuning');
+    case 'TUNE_SUCCESSFUL':
+    case 'TUNE_OK':            return t('flxp.atuOk');
+    case 'TUNE_FAIL':
+    case 'TUNE_FAIL_BYPASS':   return t('flxp.atuFail');
+    case 'TUNE_BYPASS':
+    case 'TUNE_MANUAL_BYPASS': return t('flxp.atuBypassed');
+    case 'TUNE_ABORTED':       return t('flxp.atuAborted');
+    case 'TUNE_NOT_STARTED':
+    case 'NONE':
+    case '':                   return t('flxp.atuIdle');
+    default:                   return status || '';
+  }
+}
+
+function atuTone(status: string | undefined): string {
+  switch ((status || '').toUpperCase()) {
+    case 'TUNE_SUCCESSFUL':
+    case 'TUNE_OK':            return 'text-success';
+    case 'TUNE_FAIL':
+    case 'TUNE_FAIL_BYPASS':   return 'text-danger';
+    case 'TUNE_IN_PROGRESS':   return 'text-warning';
+    default:                   return 'text-muted-foreground';
+  }
+}
+
 function LevelRow({ label, on, onToggle, value, onLevel, disabled, accent, sliderAccent }: {
   label: string; on: boolean; onToggle: () => void; value: number; onLevel: (v: number) => void;
   disabled?: boolean; accent?: 'emerald' | 'violet' | 'cyan' | 'amber'; sliderAccent?: string;
@@ -624,6 +655,33 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
               )}
             </div>
 
+            {/* ATU — the radio's built-in tuner. Sits under TUNE because that is
+                the order of operations: the tuner needs a carrier to measure
+                against, so TUNE first, then start a tuning cycle. */}
+            <div className="flex items-center gap-2 border-t border-border/60 pt-3">
+              <span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">ATU</span>
+              <button type="button" disabled={off}
+                title={t('flxp.atuTuneHint')}
+                onClick={() => FlexATUStart().catch(() => {})}
+                className="px-3 py-1.5 rounded-lg text-xs font-extrabold tracking-wide border-2 border-warning text-warning bg-card hover:bg-warning-muted transition-all disabled:opacity-30">
+                {t('flxp.atuTune')}
+              </button>
+              <button type="button" disabled={off}
+                title={t('flxp.atuBypassHint')}
+                onClick={() => FlexATUBypass().catch(() => {})}
+                className="px-3 py-1.5 rounded-lg text-xs font-extrabold tracking-wide border-2 border-border text-muted-foreground bg-card hover:bg-muted transition-all disabled:opacity-30">
+                {t('flxp.atuBypass')}
+              </button>
+              <Chip on={st.atu_memories} disabled={off} label={t('flxp.atuMem')} accent="cyan"
+                title={t('flxp.atuMemHint')}
+                onClick={() => change('atu_memories', !st.atu_memories, () => FlexSetATUMemories(!st.atu_memories))} />
+              {/* The status is the whole point: a tune that FAILED and one that
+                  never ran look identical on the radio's own front panel. */}
+              <span className={cn('ml-auto text-[11px] font-mono font-semibold whitespace-nowrap', atuTone(st.atu_status))}>
+                {atuLabel(st.atu_status, t)}
+              </span>
+            </div>
+
 
             {!isCW ? (
             <div className="border-t border-border/60 pt-3 space-y-3">

frontend/src/lib/i18n.tsx

@@ -357,7 +357,7 @@ const en: Dict = {
   'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Channel {letter} — active', 'tgp.chSelect': 'Make channel {letter} active', 'tgp.chActiveTag': 'active', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypassed', 'tgp.inLine': 'In line',
   'flxp.ritHint': 'RIT — shifts your RECEIVE frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.', 'flxp.xitHint': 'XIT — shifts your TRANSMIT frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.',
   'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
-  'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER', 'flxp.outputPower': 'OUTPUT POWER', 'flxp.speOffline': 'SPE offline', 'flxp.acomOffline': 'ACOM offline', 'flxp.ampPick': 'Choose which amplifier this card shows', 'flxp.dspV4Hint': 'SmartSDR v4 DSP (8000/Aurora series)', 'flxp.daxHint': 'DAX as the transmit audio source (SmartSDR transmit-bar DAX button) — for WSJT-X & co', 'flxp.rnnHint': 'RNN — AI noise reduction (on/off)', 'flxp.anftHint': 'ANFT — FFT-based automatic notch filter (on/off)', 'flxp.dspNoise': 'Noise', 'flxp.dspMore': 'Show/hide advanced DSP (WNB, v4 NR/notch)',
+  'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.atuTune': 'TUNE', 'flxp.atuTuneHint': 'Start a tuning cycle on the built-in ATU. The radio keys a carrier itself to measure the match.', 'flxp.atuBypass': 'BYPASS', 'flxp.atuBypassHint': 'Take the ATU out of line (straight through).', 'flxp.atuMem': 'MEM', 'flxp.atuMemHint': 'Reuse the stored tuning solution for this frequency instead of tuning again.', 'flxp.atuIdle': 'not tuned', 'flxp.atuTuning': 'tuning…', 'flxp.atuOk': 'tuned', 'flxp.atuFail': 'TUNE FAILED', 'flxp.atuBypassed': 'bypassed', 'flxp.atuAborted': 'aborted', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER', 'flxp.outputPower': 'OUTPUT POWER', 'flxp.speOffline': 'SPE offline', 'flxp.acomOffline': 'ACOM offline', 'flxp.ampPick': 'Choose which amplifier this card shows', 'flxp.dspV4Hint': 'SmartSDR v4 DSP (8000/Aurora series)', 'flxp.daxHint': 'DAX as the transmit audio source (SmartSDR transmit-bar DAX button) — for WSJT-X & co', 'flxp.rnnHint': 'RNN — AI noise reduction (on/off)', 'flxp.anftHint': 'ANFT — FFT-based automatic notch filter (on/off)', 'flxp.dspNoise': 'Noise', 'flxp.dspMore': 'Show/hide advanced DSP (WNB, v4 NR/notch)',
   'icmp.spectrum': 'Spectrum', 'icmp.scopeFixed': 'Fixed — double-click / wheel to tune', 'icmp.scopeCenter': 'Center — follows VFO', 'icmp.scopeOff': 'Scope off', 'icmp.scopePanDown': 'Shift scope −50 kHz', 'icmp.scopePanUp': 'Shift scope +50 kHz', 'icmp.scopeCenterVfo': 'Center scope on the current frequency (±50 kHz)', 'icmp.notConnected': "Icom not connected. Enable the Icom CI-V backend in Settings → CAT and connect the radio's USB port.", 'icmp.refresh': 'Refresh', 'icmp.meters': 'Meters', 'icmp.transmit': 'Transmit', 'icmp.power': 'Power', 'icmp.mic': 'Mic', 'icmp.receive': 'Receive', 'icmp.preamp': 'Preamp', 'icmp.filter': 'Filter', 'icmp.noiseNotch': 'Noise / Notch', 'icmp.autoNotch': 'Auto notch filter', 'icmp.apf': 'Audio peak filter (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Wheel or ± to shift · Ctrl+←/→ shifts RIT when active', 'icmp.bandsAntenna': 'Bands & Antenna', 'icmp.bandCurrent': 'The rig is on {b} m', 'icmp.antenna': 'Antenna', 'icmp.passband': 'Passband / Notch', 'icmp.pbtCenter': 'Center PBT', 'icmp.manualNotch': 'Manual notch — MN on, then set position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Power the radio ON (boots ~15 s)', 'icmp.powerOffHint': 'Power the radio OFF', 'icmp.powerOffConfirm': 'Switch the radio OFF?',
   'rst.clickToFill': 'Click to set RST tx from the signal',
   'qrz.openTitle': 'Open {call} on QRZ.com',
@@ -753,7 +753,7 @@ const fr: Dict = {
   'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Canal {letter} — actif', 'tgp.chSelect': 'Activer le canal {letter}', 'tgp.chActiveTag': 'actif', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypass', 'tgp.inLine': 'En ligne',
   'flxp.ritHint': "RIT — décale uniquement ta fréquence de RÉCEPTION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.", 'flxp.xitHint': "XIT — décale uniquement ta fréquence d'ÉMISSION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.",
   'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
-  'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR', 'flxp.outputPower': 'PUISSANCE DE SORTIE', 'flxp.speOffline': 'SPE hors ligne', 'flxp.acomOffline': 'ACOM hors ligne', 'flxp.ampPick': 'Choisir quel amplificateur cette carte affiche', 'flxp.dspV4Hint': 'DSP SmartSDR v4 (séries 8000/Aurora)', 'flxp.daxHint': "DAX comme source audio d'émission (bouton DAX du bandeau transmit de SmartSDR) — pour WSJT-X & co", 'flxp.rnnHint': 'RNN — réduction de bruit par IA (on/off)', 'flxp.anftHint': 'ANFT — filtre notch automatique FFT (on/off)', 'flxp.dspNoise': 'Bruit', 'flxp.dspMore': 'Afficher/masquer le DSP avancé (WNB, NR/notch v4)',
+  'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.atuTune': 'ACCORD', 'flxp.atuTuneHint': "Lance un cycle d'accord sur le coupleur intégré. La radio émet elle-même une porteuse pour mesurer l'adaptation.", 'flxp.atuBypass': 'BYPASS', 'flxp.atuBypassHint': 'Sort le coupleur de la ligne (passage direct).', 'flxp.atuMem': 'MEM', 'flxp.atuMemHint': "Réutilise l'accord mémorisé pour cette fréquence au lieu de refaire un cycle.", 'flxp.atuIdle': 'non accordé', 'flxp.atuTuning': 'accord en cours…', 'flxp.atuOk': 'accordé', 'flxp.atuFail': 'ÉCHEC ACCORD', 'flxp.atuBypassed': 'contourné', 'flxp.atuAborted': 'interrompu', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR', 'flxp.outputPower': 'PUISSANCE DE SORTIE', 'flxp.speOffline': 'SPE hors ligne', 'flxp.acomOffline': 'ACOM hors ligne', 'flxp.ampPick': 'Choisir quel amplificateur cette carte affiche', 'flxp.dspV4Hint': 'DSP SmartSDR v4 (séries 8000/Aurora)', 'flxp.daxHint': "DAX comme source audio d'émission (bouton DAX du bandeau transmit de SmartSDR) — pour WSJT-X & co", 'flxp.rnnHint': 'RNN — réduction de bruit par IA (on/off)', 'flxp.anftHint': 'ANFT — filtre notch automatique FFT (on/off)', 'flxp.dspNoise': 'Bruit', 'flxp.dspMore': 'Afficher/masquer le DSP avancé (WNB, NR/notch v4)',
   'icmp.spectrum': 'Spectre', 'icmp.scopeFixed': 'Fixe — double-clic / molette pour accorder', 'icmp.scopeCenter': 'Centré — suit le VFO', 'icmp.scopeOff': 'Scope éteint', 'icmp.scopePanDown': 'Décaler le scope −50 kHz', 'icmp.scopePanUp': 'Décaler le scope +50 kHz', 'icmp.scopeCenterVfo': 'Centrer le scope sur la fréquence actuelle (±50 kHz)', 'icmp.notConnected': 'Icom non connecté. Active le backend CI-V Icom dans Réglages → CAT et connecte le port USB de la radio.', 'icmp.refresh': 'Rafraîchir', 'icmp.meters': 'Mesures', 'icmp.transmit': 'Émission', 'icmp.power': 'Puissance', 'icmp.mic': 'Micro', 'icmp.receive': 'Réception', 'icmp.preamp': 'Préampli', 'icmp.filter': 'Filtre', 'icmp.noiseNotch': 'Bruit / Notch', 'icmp.autoNotch': 'Filtre notch auto', 'icmp.apf': 'Filtre de pic audio (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Molette ou ± pour décaler · Ctrl+←/→ décale le RIT si actif', 'icmp.bandsAntenna': 'Bandes & Antenne', 'icmp.bandCurrent': 'Le poste est sur {b} m', 'icmp.antenna': 'Antenne', 'icmp.passband': 'Passe-bande / Notch', 'icmp.pbtCenter': 'Centrer PBT', 'icmp.manualNotch': 'Notch manuel — active MN, puis règle la position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Allumer la radio (démarre en ~15 s)', 'icmp.powerOffHint': 'Éteindre la radio', 'icmp.powerOffConfirm': 'Éteindre la radio ?',
   'rst.clickToFill': 'Clic pour remplir le RST tx depuis le signal',
   'qrz.openTitle': 'Ouvrir {call} sur QRZ.com',