fix(winkeyer): send the probe the way a working client sends it

Logger32's WinKeyer debug against the K3NG that will not answer OpsLog is a
capture of the exchange working, on the same keyer and the same port:

    Sent: 13 13 13 00 04 55
    Rcvd: 55            (72 ms)
    Sent: 00 02  Host open
    Rcvd: 23            (WK2 v23)

That is the sequence I already send. The difference is the grouping: Logger32
puts the three nulls and the echo probe in ONE write, and we split them with a
50 ms pause and a buffer purge in between. On a keyer that reboots when the
port opens, that pause is a window for it to come up mid-sequence and swallow
half of it — and there was nothing to wait for, since a null produces no reply.

The handshake bytes are now logged unconditionally, not behind the diagnostic
option. "No WinKeyer answered" cannot be told apart from a wrong port, a wrong
baud rate, a keyer still booting, or another program holding the line. The
bytes can, and it is four lines per connect attempt.

internal/winkeyer/hostopen.go

@@ -30,10 +30,10 @@ import (
 //	         the one to fail on: everything after it assumes a listener.
 //	open     0x00 0x02, and the keyer returns its firmware version.
 const (
-	cmdNull      = 0x13
-	cmdAdmin     = 0x00
-	adminOpen    = 0x02
-	adminEcho    = 0x04
+	cmdNull     = 0x13
+	cmdAdmin    = 0x00
+	adminOpen   = 0x02
+	adminEcho   = 0x04
 	echoProbe   = 0x55 // K1EL's own choice; any byte works, this one is 0b01010101
 	bootDelay   = 400 * time.Millisecond
 	echoTimeout = 2 * time.Second // K1EL: "if a WK doesn't respond within 2 seconds abort"
@@ -95,18 +95,25 @@ func hostOpenOnce(p serial.Port, boot time.Duration) (int, error) {
 	time.Sleep(boot)
 	drain(p)
 
-	// Resync the command parser before asking it anything.
-	if _, err := p.Write([]byte{cmdNull, cmdNull, cmdNull}); err != nil {
-		return 0, fmt.Errorf("resync: %w", err)
-	}
-	time.Sleep(50 * time.Millisecond)
-	drain(p)
-
-	// Is anything actually there?
-	if _, err := p.Write([]byte{cmdAdmin, adminEcho, echoProbe}); err != nil {
+	// The resync nulls and the echo probe go out as ONE write.
+	//
+	// Copied byte for byte from a Logger32 capture against the K3NG keyer that
+	// would not answer OpsLog: "Sent: 13 13 13 00 04 55 / Rcvd: 55". Same keyer,
+	// same port, same six bytes — the only difference was that we sent them as
+	// two writes with a pause and a buffer purge in between, and Logger32 sends
+	// them as one. On a keyer that reboots when the port opens, that pause is a
+	// window for it to come up mid-sequence and swallow half of it.
+	//
+	// There is nothing to wait for between the two halves anyway: a null produces
+	// no reply, so the pause was only ever giving the keyer a chance to change
+	// its mind.
+	probe := []byte{cmdNull, cmdNull, cmdNull, cmdAdmin, adminEcho, echoProbe}
+	traceHandshake("TX", probe, 0, false)
+	if _, err := p.Write(probe); err != nil {
 		return 0, fmt.Errorf("echo test: %w", err)
 	}
 	b, ok := readByte(p, echoTimeout)
+	traceHandshake("RX", nil, b, ok)
 	if !ok {
 		return 0, errNoKeyer
 	}
@@ -116,16 +123,37 @@ func hostOpenOnce(p serial.Port, boot time.Duration) (int, error) {
 		return 0, fmt.Errorf("echo test: expected 0x%02X, got 0x%02X — is this the keyer's port?", echoProbe, b)
 	}
 
-	if _, err := p.Write([]byte{cmdAdmin, adminOpen}); err != nil {
+	open := []byte{cmdAdmin, adminOpen}
+	traceHandshake("TX", open, 0, false)
+	if _, err := p.Write(open); err != nil {
 		return 0, fmt.Errorf("host open: %w", err)
 	}
 	ver, ok := readByte(p, openTimeout)
+	traceHandshake("RX", nil, ver, ok)
 	if !ok {
 		return 0, errors.New("host open: the keyer echoed but did not return its firmware version")
 	}
 	return int(ver), nil
 }
 
+// traceHandshake puts the opening exchange in the log, ALWAYS — unlike the
+// running trace beside it, which is behind the diagnostic option.
+//
+// A failure that says only "no WinKeyer answered" cannot be told apart from a
+// wrong port, a wrong baud rate, a keyer still rebooting, or another program
+// holding the line. The bytes can. It is four lines per connect, and only when
+// the connect is attempted.
+func traceHandshake(dir string, b []byte, got byte, ok bool) {
+	switch {
+	case dir == "TX":
+		applog.Printf("winkeyer: handshake TX % 02X", b)
+	case ok:
+		applog.Printf("winkeyer: handshake RX %02X", got)
+	default:
+		applog.Printf("winkeyer: handshake RX — nothing came back")
+	}
+}
+
 // readByte waits up to d for one byte. The serial read timeout is per-call and
 // can return 0 bytes without an error, so this loops until the deadline rather
 // than trusting a single Read.

internal/winkeyer/hostopen_test.go

@@ -102,6 +102,8 @@ func TestHostOpenFollowsK1ELSequence(t *testing.T) {
 	if ver != 23 {
 		t.Errorf("version = %d, want 23", ver)
 	}
+	// One write for the six probe bytes, then Host Open — the order and the
+	// grouping of a Logger32 capture against a real K3NG.
 	want := []byte{
 		cmdNull, cmdNull, cmdNull,
 		cmdAdmin, adminEcho, echoProbe,