feat: network audio into the QSO recorder, and a Yaesu that stays on its VFO

An Icom reached over the LAN streams its receive audio through the Icom
protocol, and Windows sees no sound card for it at all — the audio settings
could only offer the PC's own microphone, so "From radio" had nothing right to
point at and the QSO recorder had nothing to record. The recorder now accepts a
PUSHED source: the decoded stream goes to the speakers and to the recorder
alike, with no virtual cable to set up. Which source it uses follows the CAT
backend, and it is restarted only when that answer changes, so an ordinary
settings save never cuts a recording in half.

OmniRig no longer sends SetSimplexMode to a Yaesu when tuning. It is a silent
no-op on some — an FT-891 logged OK on every spot click while FreqA never
moved — and actively harmful on others. From an FT-2000 log, one QSY:

	Vfo="AB"(0x80)  Split=0x10000 (off)   the operator's state
	Vfo="BA"(0x100) Split=0x8000  (ON)    after SetSimplexMode

The rig-agnostic "receive and transmit HERE, simplex" call turned split on and
moved reception to VFO B. OpsLog then displayed B — reading the radio correctly,
after having moved it itself. Icom is untouched: there the call is the
authoritative one and the direct write is unreliable.

Also:
  - the NEW county badge shows in the entry form itself, inside the field,
    where the operator is deciding whether to call.
  - the basemap buttons clear the zoom controls; Light sat a few pixels from
    the minus button and was being clicked by mistake.
  - French cluster status: DÉJÀ CTC reads DÉJÀ QSO.

changelog.json

@@ -1,4 +1,22 @@
 [
+  {
+    "version": "0.26.7",
+    "date": "",
+    "en": [
+      "The NEW badge on a county now shows in the entry form itself, inside the field, and not only on the Info tab — it answers the question at the moment the operator is deciding whether to call.",
+      "OmniRig: a Yaesu is no longer sent OmniRig's SetSimplexMode when tuning. It is a no-op on some (an FT-891 never moved) and harmful on others — on an FT-2000 it turned split on and moved reception to VFO B, which is why OpsLog then showed B instead of A. The direct frequency write, which is what tunes these rigs, is unchanged.",
+      "The basemap buttons on the main map are shifted clear of the zoom controls — Light sat a few pixels from the minus button and was being clicked by mistake.",
+      "Cluster, French interface: the WKD CALL status now reads DÉJÀ QSO instead of DÉJÀ CTC.",
+      "Icom over LAN: the receive audio streamed by the rig now feeds the QSO recorder as well as the speakers. On a network connection Windows sees no radio sound card at all — the audio settings could only offer the PC microphone — so the stream is pushed straight into the recorder, with no virtual cable to set up."
+    ],
+    "fr": [
+      "Le badge NOUV du comté s'affiche maintenant dans le formulaire de saisie lui-même, à l'intérieur du champ, et plus seulement dans l'onglet Info — il répond au moment où l'opérateur décide d'appeler ou non.",
+      "OmniRig : le SetSimplexMode d'OmniRig n'est plus envoyé aux Yaesu lors d'un changement de fréquence. Il est sans effet sur certains (un FT-891 ne bougeait pas) et nuisible sur d'autres — sur un FT-2000 il activait le split et faisait passer la réception sur le VFO B, d'où l'affichage du B au lieu du A. L'écriture directe de la fréquence, qui est ce qui accorde réellement ces postes, ne change pas.",
+      "Les boutons de fond de carte sont décalés à l'écart des commandes de zoom — Light était à quelques pixels du bouton moins et se faisait cliquer par erreur.",
+      "Cluster, interface française : le statut « DÉJÀ CTC » devient « DÉJÀ QSO ».",
+      "Icom en réseau : l'audio reçu diffusé par le poste alimente maintenant l'enregistreur de QSO en plus des haut-parleurs. Sur une liaison réseau, Windows ne voit aucune carte son de la radio — les réglages audio ne proposaient que le micro du PC — donc le flux est injecté directement dans l'enregistreur, sans câble virtuel à installer."
+    ]
+  },
   {
     "version": "0.26.6",
     "date": "",