From 6f1c998a26c3c8dc2bf4e569d90265595bec5177 Mon Sep 17 00:00:00 2001 From: rouggy Date: Tue, 8 Sep 2026 18:52:19 +0200 Subject: [PATCH] fix(cat): choosing a radio switches CAT on, and the log stops lying MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A Flex 6700 owner's log: no connection attempt of any kind, and six saves each answered with cat: settings saved, link unchanged - staying connected His settings were right — FlexRadio selected, 192.168.1.154, port 4992, and the detector had found and named his radio back at him. What was off was the master CAT switch, which sits above the radio dropdown. Three things, because each of them failed him on its own. The log line was false on both counts: a disabled CAT has the signature "off", so every save took the unchanged branch and announced a link that was staying connected when nothing was connected at all. It now says CAT is switched off, which is the fact he needed and the only place it could have reached him. The panel says it too, where he was actually looking: a notice under the switch while it is off, because everything below it can be perfectly right and still connect to nothing. And choosing a radio now ticks the switch. Picking a brand, typing an address, running a detector and clicking the radio it found are all one gesture — "connect to this" — and making the operator find a separate master switch afterwards is a trap. Nothing here ever turns CAT off on its own; they can still untick it. Co-Authored-By: Claude Opus 5 (1M context) --- app.go | 17 +++++++++++++++-- changelog.json | 6 ++++-- frontend/src/components/SettingsModal.tsx | 20 ++++++++++++++++++-- frontend/src/lib/i18n.tsx | 4 ++-- 4 files changed, 39 insertions(+), 8 deletions(-) diff --git a/app.go b/app.go index eecdfd9..221942e 100644 --- a/app.go +++ b/app.go @@ -16352,9 +16352,22 @@ func (a *App) reloadCAT() { if s.Enabled && s.Backend == "omnirig" && a.cat != nil { _ = a.cat.OmniRigDo(func(o cat.OmniRigController) error { o.SetCWLower(s.OmniRigCWLower); return nil }) } - // Nothing about the link changed → leave it connected. See catLinkSig. + // Nothing about the link changed → leave it as it is. See catLinkSig. if sig := catLinkSig(s); sig == a.catSig { - applog.Printf("cat: settings saved, link unchanged — staying connected") + // Which is NOT the same as staying connected. + // + // A disabled CAT has the signature "off", so every save while the master + // switch is off took this branch and announced that the link was + // unchanged and connected — when nothing was connected at all. A Flex + // 6700 owner saved six times, with the right radio, the right address + // and the detector naming his radio back at him, and this line told him + // each time that all was well. It was the one line that could have said + // otherwise. + if !s.Enabled { + applog.Printf("cat: settings saved, but CAT is switched OFF — nothing will connect until you tick it in Settings ▸ CAT") + } else { + applog.Printf("cat: settings saved, link unchanged — staying connected") + } return } else { a.catSig = sig diff --git a/changelog.json b/changelog.json index 1336d7a..689d975 100644 --- a/changelog.json +++ b/changelog.json @@ -6,13 +6,15 @@ "After an update, OpsLog starts again. The fix that stopped Defender calling the updater a trojan removed the helper that waited for the old process to die, and nothing took over the job: the new instance was patient with the single-instance lock for twenty seconds while the old one is allowed thirty to shut down — closing a remote logbook, a CAT session, sometimes a backup. Where that ran long the new process gave up in silence, leaving no window and a leftover OpsLog in the task manager. It now waits for the previous process itself, ending the instant it does; and if it really has not gone, it says so instead of claiming OpsLog is already running.", "A UDP row set to multicast on an address that is not one now listens anyway. 127.0.0.1 in the group box is the common mistake — it is the address every other field in every other program wants — but a multicast group runs 224.0.0.0 to 239.255.255.255, and joining anything else failed on every interface with a Windows error naming nothing the operator had typed. The row simply did not run. It now listens on unicast, which is what such an address means, and says so in the log.", "The confirmation defaults added for the newest services were blank. HAMLOG.online arrived after most profiles were set up, so it had no default at all — and blank is not a status anybody chose. Every service now starts the same way: the sent side at R (waiting to go out), the received side at N. A blank left by a service that did not exist when you last saved is filled in; a status you chose yourself is untouched.", - "OmniRig: a setting for rig files whose CW is the reverse one. OmniRig has two CW modes and nothing says which one a rig file calls plain CW — some Icom files map PM_CW_U to CW, others to CW-R — so clicking a CW spot on an IC-7610 landed the radio in CW-R, and the only way out was to edit the rig file. Settings → CAT → OmniRig now has a tick box for it, applied at once without dropping the link. (If your VFOs read the wrong way round on the same rig, the VFO override beside it is the answer: rig files disagree there too.)" + "OmniRig: a setting for rig files whose CW is the reverse one. OmniRig has two CW modes and nothing says which one a rig file calls plain CW — some Icom files map PM_CW_U to CW, others to CW-R — so clicking a CW spot on an IC-7610 landed the radio in CW-R, and the only way out was to edit the rig file. Settings → CAT → OmniRig now has a tick box for it, applied at once without dropping the link. (If your VFOs read the wrong way round on the same rig, the VFO override beside it is the answer: rig files disagree there too.)", + "Choosing a radio now switches CAT on. The master switch sits above the radio dropdown, and leaving it off while you pick your brand, type the address and run the detector — which finds your radio and prints its name — is a trap: a Flex 6700 owner did exactly that, saved six times, and got no link and no error. Picking a radio, or clicking one the detector found, ticks it. The panel also says so plainly while it is off, and the log line that used to announce \"link unchanged, staying connected\" when nothing was connected now says CAT is switched off." ], "fr": [ "Après une mise à jour, OpsLog redémarre. Le correctif qui a fait cesser la détection en cheval de Troie a supprimé l'assistant qui attendait la mort de l'ancien processus, et rien n'a repris ce travail : la nouvelle instance patientait vingt secondes sur le verrou d'instance unique alors que l'ancienne dispose de trente pour se fermer — elle referme un journal distant, une session CAT, parfois une sauvegarde. Quand cela durait, le nouveau processus abandonnait en silence : pas de fenêtre, et un OpsLog restant dans le gestionnaire des tâches. Il attend désormais l'ancien processus lui-même, et repart à l'instant où celui-ci s'arrête ; et s'il n'est vraiment pas parti, il le dit au lieu d'annoncer qu'OpsLog tourne déjà.", "Une ligne UDP réglée en multicast sur une adresse qui n'en est pas une écoute désormais quand même. 127.0.0.1 dans le champ groupe est l'erreur classique — c'est l'adresse que réclame tout autre champ de tout autre programme — mais un groupe multicast va de 224.0.0.0 à 239.255.255.255, et rejoindre autre chose échouait sur toutes les interfaces avec une erreur Windows ne nommant rien de ce que l'opérateur avait saisi. La ligne ne tournait tout simplement pas. Elle écoute maintenant en unicast, ce que veut dire une telle adresse, et le dit dans le journal.", "Les statuts par défaut des services les plus récents étaient vides. HAMLOG.online est arrivé après la configuration de la plupart des profils : il n'avait donc aucun défaut — et vide n'est pas un statut que quelqu'un a choisi. Chaque service démarre désormais pareil : côté envoi R (en attente de départ), côté réception N. Un vide laissé par un service qui n'existait pas lors de votre dernier enregistrement est comblé ; un statut que vous avez choisi n'est pas touché.", - "OmniRig : un réglage pour les fichiers de rig dont la CW est l'inverse. OmniRig a deux modes CW et rien ne dit lequel un fichier appelle CW tout court — certains fichiers Icom associent PM_CW_U à CW, d'autres à CW-R — si bien qu'un clic sur un spot CW mettait un IC-7610 en CW-R, sans autre issue que de modifier le fichier de rig. Réglages → CAT → OmniRig a désormais une case pour cela, appliquée aussitôt sans couper la liaison. (Si vos VFO sont inversés sur la même radio, le sélecteur de VFO juste à côté est la réponse : les fichiers de rig divergent là aussi.)" + "OmniRig : un réglage pour les fichiers de rig dont la CW est l'inverse. OmniRig a deux modes CW et rien ne dit lequel un fichier appelle CW tout court — certains fichiers Icom associent PM_CW_U à CW, d'autres à CW-R — si bien qu'un clic sur un spot CW mettait un IC-7610 en CW-R, sans autre issue que de modifier le fichier de rig. Réglages → CAT → OmniRig a désormais une case pour cela, appliquée aussitôt sans couper la liaison. (Si vos VFO sont inversés sur la même radio, le sélecteur de VFO juste à côté est la réponse : les fichiers de rig divergent là aussi.)", + "Choisir une radio active désormais le CAT. L'interrupteur principal est au-dessus de la liste des radios, et le laisser éteint pendant qu'on choisit sa marque, saisit l'adresse et lance la détection — qui trouve la radio et affiche son nom — est un piège : un possesseur de Flex 6700 a fait exactement cela, enregistré six fois, sans liaison ni erreur. Choisir une radio, ou cliquer sur celle que la détection a trouvée, coche la case. Le panneau le dit aussi clairement tant qu'elle est décochée, et la ligne de journal qui annonçait « liaison inchangée, toujours connecté » alors que rien n'était connecté dit maintenant que le CAT est désactivé." ] }, { diff --git a/frontend/src/components/SettingsModal.tsx b/frontend/src/components/SettingsModal.tsx index 46cf42b..a85ceaf 100644 --- a/frontend/src/components/SettingsModal.tsx +++ b/frontend/src/components/SettingsModal.tsx @@ -1871,13 +1871,21 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged // else writes the backend (loading a profile, an older settings file). const catBrand = brandOfBackend(catCfg.backend, (catCfg as any).kenwood_link).brand; const catLink = brandOfBackend(catCfg.backend, (catCfg as any).kenwood_link).link; + // Choosing a radio TURNS CAT ON. + // + // The master switch sits above this dropdown, and leaving it off while the + // operator picks their brand, types the IP and runs the detector — which found + // their radio and printed its name — is a trap: every one of those gestures + // means "connect to this". A Flex 6700 owner did exactly that, saved six + // times, and got no link and no error. They can still untick it; nothing here + // ever turns CAT off on its own. const applyCatBrand = (id: string) => { const b = CAT_BRANDS.find((x) => x.id === id); if (!b) return; // Keep the connection when the new brand offers it, otherwise take its // first — picking Flex from Kenwood-over-USB has to land on something. const link = b.links.includes(catLink) ? catLink : b.links[0]; - setCatCfg((s) => ({ ...s, backend: b.backend(link), kenwood_link: link } as any)); + setCatCfg((s) => ({ ...s, backend: b.backend(link), kenwood_link: link, enabled: true } as any)); }; const applyCatLink = (link: string) => { const b = CAT_BRANDS.find((x) => x.id === catBrand); @@ -3578,6 +3586,14 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged setCatCfg((s) => ({ ...s, enabled: !!c }))} /> {t('cat.enable')} + {/* Said where it is happening. Everything below this line can be filled + in perfectly — the right radio, the right address, the detector + finding it by name — and none of it connects while this is off. */} + {!catCfg.enabled && ( +
+ {t('cat.disabledNotice')} +
+ )} {/* BRAND, then CONNECTION. The backend list mixed the two: "Icom (USB)" and "Icom (network)" @@ -3663,7 +3679,7 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged onChange={(n) => setCatCfg((s) => ({ ...s, flex_port: n }))} fallback={4992} />
- setCatCfg((s) => ({ ...s, flex_host: ip, flex_port: port }))} /> + setCatCfg((s) => ({ ...s, flex_host: ip, flex_port: port, enabled: true }))} />
{/* What OpsLog DOES with a Flex — panadapter spots, decode spots, the DAX switch for voice messages — moved to Settings → diff --git a/frontend/src/lib/i18n.tsx b/frontend/src/lib/i18n.tsx index 8507d25..c399985 100644 --- a/frontend/src/lib/i18n.tsx +++ b/frontend/src/lib/i18n.tsx @@ -416,7 +416,7 @@ const en: Dict = { 'extsvc.hint': 'Upload logged QSOs to online logbooks. Each service uploads automatically on a new QSO when enabled; timing is per-service (immediate, or a 1–2 min delay so a mis-logged QSO can still be fixed first).', 'hw.motorTxInhibit': 'Inhibit transmission while the antenna is moving', 'hw.motorTxInhibitHint': 'Blocks the FlexRadio from transmitting while the elements move (needs FlexRadio in API mode + this antenna enabled). No effect with other radios.', 'hw.motorAntenna': 'Ultrabeam / Steppir', 'hw.motorEnable': 'Enable antenna control', 'hw.motorType': 'Antenna type', 'hw.motorTransport': 'Connection', 'hw.motorTcp': 'Network (TCP)', 'hw.motorSerial': 'Serial (COM)', 'hw.motorCom': 'Serial port', 'hw.motorComUb': '(2nd port of the USB cable)', 'hw.motorBaud': 'Baud', 'hw.steppirHint': 'SteppIR controllers are RS-232 serial (the DATA OUT DB9 port). Serial = a USB↔RS-232 (FTDI) adapter, shown as a COM port. Network = a serial-to-Ethernet bridge (as for the Ultrabeam).', 'hw.steppirRange': 'Tunable range', 'hw.steppirRangeHint': "The SteppIR's frequency coverage. On a band outside this range (e.g. 30 m on a 20 m–6 m SteppIR) OpsLog won't try to tune the antenna and won't inhibit transmission. Default 13–54 MHz (20 m–6 m); widen the low edge (e.g. 6) for a 40 m-equipped SteppIR.", 'hw.motorBands': 'Covered bands', 'hw.motorStep': 'Re-tune step', 'hw.motorBandFreqHint': 'Frequency each band button tunes the antenna to (kHz). Leave empty for the default shown.', 'hw.motorFollow': 'Follow rig frequency (auto-tune the antenna)', 'hw.ultrabeam': 'Antenna (Ultrabeam)', 'hw.audioVoice': 'Audio devices & voice keyer', // CAT panel body - 'cat.radioMyRig': 'MY_RIG', 'cat.radioMyRigPh': 'e.g. IC-7610 + PGXL', 'cat.radioMyRigHint': 'Written into MY_RIG on every QSO made with this radio, ahead of the per-band station in Operating conditions — that one says what you planned to use, this one says which radio is keying. Leave it empty to keep the old behaviour.', 'cat.radio': 'Radio', 'cat.radioNamePh': 'Name (e.g. FTDX10)', 'cat.radioAddHint': 'Add a radio, copied from this one', 'cat.radioRemoveHint': 'Remove this radio', 'cat.radioHint': 'Everything below configures the selected radio. Switch between them from the CAT button in the status bar — the logbook, the callsign and the rest of the station stay as they are.', 'cat.enable': 'Enable CAT', 'cat.brand': 'Radio', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'Another program then reaches the radio through OpsLog — with every backend, not only the native ones. For Hamlib pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532; for TCI point the program at 127.0.0.1:40001.', 'cat.shareProto': 'Protocol', 'cat.shareRigctl': 'Hamlib NET rigctl — WSJT-X, JTDX, MSHV, Log4OM', 'cat.shareTci': 'TCI — Expert Electronics', 'cat.shareTciClash': 'The CAT backend is TCI too: ExpertSDR is probably already using port 40001 on this PC. Give the server another port, or share over Hamlib instead.', 'cat.sharePort': 'Sharing port', 'cat.pttKey': 'Enable PTT hotkey', 'cat.pttKeyPress': 'Press a key…', 'cat.pttKeyNone': 'Click to set a key', 'cat.pttKeyClear': 'Clear', 'cat.pttKeyToggle': 'Toggle mode (press to key, press again to unkey)', 'cat.pttKeyHint': 'While OpsLog is focused, this key keys the transmitter — held down by default (release to stop), or latched in toggle mode. It uses the Audio → PTT method (CAT / RTS / DTR), falling back to CAT keying. Pick a key you never type while logging (e.g. Pause, ScrollLock, or a footswitch mapped to one) — OpsLog swallows it so it never lands in a field.', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.xieguPTTLine': 'How the rig is keyed', 'cat.xieguPTTCiv': 'CI-V command', 'cat.xieguPTTHint': 'A G90 does not transmit on the CI-V command: interfaces like the DE-19 key it on RTS or DTR. Pick the line yours uses \u2014 it is also what lets WSJT-X transmit through the shared CAT link.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.optElecraft': 'Elecraft K3/K4 (USB, network)', 'cat.elecraftHint': 'Digital modes automatically use DATA A (MD6+DT0) — the sub-mode FT8 audio needs.', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kwLink': 'Connection', 'cat.kwLinkBridge': 'RS-232 to Ethernet (serial bridge)', 'cat.kwLinkNative': 'The radio\u2019s own network protocol', 'cat.kwLinkNativeHint': 'Not supported yet. It is a session with its own framing and login, not the CAT byte stream over a socket, so it has to be implemented per radio — and against one. Use USB, or a serial-to-Ethernet bridge, until then.', 'cat.kwLinkUsb': 'USB / serial', 'cat.kwLinkNet': 'Network', 'cat.kenwoodHostHint': 'The network option carries the SAME CAT commands over TCP instead of a cable: a serial-over-network bridge (ser2net, an Ethernet-serial adapter, a Raspberry Pi in the shack), or a radio that exposes its raw CAT port. It is NOT Hamlib — port 4532 is rigctld, a different protocol, and it is what OpsLog itself SERVES under \u201cShare CAT\u201d.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.lowerLines': 'Lower the DTR and RTS lines on connect', 'cat.yaesuRttyUsb': 'RTTY on USB (RTTY-U)', 'cat.yaesuRttyUsbHint': '— ADIF records only “RTTY” and the rig has both sidebands. Off sets RTTY-L, the older convention; tick it if your FSK controller or decoder wants the upper one.', 'cat.lowerLinesHint': 'If your radio is always on TX, tick this.', 'cat.kwDataMode': 'Data modes (FT8/PSK…) use', 'cat.kwDataUsb': 'USB', 'cat.kwDataMd6': 'DATA A — MD6+DT0 (Elecraft K3/K4)', 'cat.kwDataKeep': 'Leave the rig’s mode unchanged', 'cat.kwDataHint': 'What OpsLog sets on the rig for a data mode. No single command fits every rig: an Elecraft K3/K4 wants DATA (MD6); a TS-590SG/TS-990S data mode is a USB modifier set on the rig, so pick USB or, safest, "Leave unchanged" and switch the rig to DATA yourself. On MD6 a plain Kenwood (TS-590/990) would land on FSK/RTTY — do not use it there.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved', + 'cat.radioMyRig': 'MY_RIG', 'cat.radioMyRigPh': 'e.g. IC-7610 + PGXL', 'cat.radioMyRigHint': 'Written into MY_RIG on every QSO made with this radio, ahead of the per-band station in Operating conditions — that one says what you planned to use, this one says which radio is keying. Leave it empty to keep the old behaviour.', 'cat.radio': 'Radio', 'cat.radioNamePh': 'Name (e.g. FTDX10)', 'cat.radioAddHint': 'Add a radio, copied from this one', 'cat.radioRemoveHint': 'Remove this radio', 'cat.radioHint': 'Everything below configures the selected radio. Switch between them from the CAT button in the status bar — the logbook, the callsign and the rest of the station stay as they are.', 'cat.disabledNotice': 'CAT is switched off. Everything below can be right — the radio, the address, a detector that found it by name — and none of it will connect until the box above is ticked.', 'cat.enable': 'Enable CAT', 'cat.brand': 'Radio', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'Another program then reaches the radio through OpsLog — with every backend, not only the native ones. For Hamlib pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532; for TCI point the program at 127.0.0.1:40001.', 'cat.shareProto': 'Protocol', 'cat.shareRigctl': 'Hamlib NET rigctl — WSJT-X, JTDX, MSHV, Log4OM', 'cat.shareTci': 'TCI — Expert Electronics', 'cat.shareTciClash': 'The CAT backend is TCI too: ExpertSDR is probably already using port 40001 on this PC. Give the server another port, or share over Hamlib instead.', 'cat.sharePort': 'Sharing port', 'cat.pttKey': 'Enable PTT hotkey', 'cat.pttKeyPress': 'Press a key…', 'cat.pttKeyNone': 'Click to set a key', 'cat.pttKeyClear': 'Clear', 'cat.pttKeyToggle': 'Toggle mode (press to key, press again to unkey)', 'cat.pttKeyHint': 'While OpsLog is focused, this key keys the transmitter — held down by default (release to stop), or latched in toggle mode. It uses the Audio → PTT method (CAT / RTS / DTR), falling back to CAT keying. Pick a key you never type while logging (e.g. Pause, ScrollLock, or a footswitch mapped to one) — OpsLog swallows it so it never lands in a field.', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.xieguPTTLine': 'How the rig is keyed', 'cat.xieguPTTCiv': 'CI-V command', 'cat.xieguPTTHint': 'A G90 does not transmit on the CI-V command: interfaces like the DE-19 key it on RTS or DTR. Pick the line yours uses \u2014 it is also what lets WSJT-X transmit through the shared CAT link.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.optElecraft': 'Elecraft K3/K4 (USB, network)', 'cat.elecraftHint': 'Digital modes automatically use DATA A (MD6+DT0) — the sub-mode FT8 audio needs.', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kwLink': 'Connection', 'cat.kwLinkBridge': 'RS-232 to Ethernet (serial bridge)', 'cat.kwLinkNative': 'The radio\u2019s own network protocol', 'cat.kwLinkNativeHint': 'Not supported yet. It is a session with its own framing and login, not the CAT byte stream over a socket, so it has to be implemented per radio — and against one. Use USB, or a serial-to-Ethernet bridge, until then.', 'cat.kwLinkUsb': 'USB / serial', 'cat.kwLinkNet': 'Network', 'cat.kenwoodHostHint': 'The network option carries the SAME CAT commands over TCP instead of a cable: a serial-over-network bridge (ser2net, an Ethernet-serial adapter, a Raspberry Pi in the shack), or a radio that exposes its raw CAT port. It is NOT Hamlib — port 4532 is rigctld, a different protocol, and it is what OpsLog itself SERVES under \u201cShare CAT\u201d.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.lowerLines': 'Lower the DTR and RTS lines on connect', 'cat.yaesuRttyUsb': 'RTTY on USB (RTTY-U)', 'cat.yaesuRttyUsbHint': '— ADIF records only “RTTY” and the rig has both sidebands. Off sets RTTY-L, the older convention; tick it if your FSK controller or decoder wants the upper one.', 'cat.lowerLinesHint': 'If your radio is always on TX, tick this.', 'cat.kwDataMode': 'Data modes (FT8/PSK…) use', 'cat.kwDataUsb': 'USB', 'cat.kwDataMd6': 'DATA A — MD6+DT0 (Elecraft K3/K4)', 'cat.kwDataKeep': 'Leave the rig’s mode unchanged', 'cat.kwDataHint': 'What OpsLog sets on the rig for a data mode. No single command fits every rig: an Elecraft K3/K4 wants DATA (MD6); a TS-590SG/TS-990S data mode is a USB modifier set on the rig, so pick USB or, safest, "Leave unchanged" and switch the rig to DATA yourself. On MD6 a plain Kenwood (TS-590/990) would land on FSK/RTTY — do not use it there.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved', 'cat.icomNetHost': 'Rig IP / hostname', 'cat.icomNetUser': 'Network user (ID)', 'cat.icomNetPass': 'Network password', 'cat.icomNetHint': "Connects to the rig's built-in LAN server directly — no RS-BA1 or Remote Utility needed (close them first). Use the Network User1 ID/Password set in the rig's Network menu. A rig in standby is powered on automatically.", 'cat.icomNetListen': 'Play it through the speakers', 'cat.icomNetListenHint': 'Untick to keep the stream silent — recordings and the voice keyer still work. Same switch as the speaker button on the Icom console.', 'cat.icomNetAudio': 'Stream RX audio over the network (experimental)', @@ -1025,7 +1025,7 @@ const fr: Dict = { 'rot.enable': 'Activer le contrôle du rotator', 'rot.testOkRG': 'Connecté — le Rotator Genius a accepté la commande (rotation vers 0°).', 'rot.testOkRead': 'Connecté — le contrôleur a répondu avec son azimut. Rien n’a bougé : ce test ne fait que lire la position.', 'rot.type': 'Type de rotator', 'rot.rotatorNum': 'Rotator n°', 'rot.dual': 'Deux rotors', 'rot.rotor1': 'Rotor 1', 'rot.rotor2': 'Rotor 2', 'rot.name': 'Nom', 'rot.antenna': 'Antenne', 'rot.antenna1': 'Antenne rotor 1', 'rot.antenna2': 'Antenne rotor 2', 'rot.name1': 'Nom du rotor 1', 'rot.name2': 'Nom du rotor 2', 'rot.antStd': 'Antenne standard', 'rot.antMotor': 'Motorisée (Ultrabeam/SteppIR)', 'rot.add': 'Ajouter un rotor', 'rot.remove': 'Supprimer le rotor', 'rot.none': 'Aucun rotor configuré. Cliquez sur « Ajouter un rotor ».', 'rot.rgDual': 'Ce Rotator Genius pilote deux rotors (en ajoute un second)', 'rot.testRotor1': 'Tester rotor 1', 'rot.testRotor2': 'Tester rotor 2', 'rot.dualHint': 'Deux rotors indépendants de n\'importe quel type — par exemple un ARCO et un Rotator Genius côte à côte. Configurez chacun ci-dessous ; OpsLog affiche un sélecteur Rotor 1/2 sur le compas pour choisir celui qu\'il tourne et affiche. Réglez chaque rotor sur « Motorisée » pour que les tracés de boom/diagramme (inverse, bidirectionnel) n\'apparaissent que pour celui qui porte l\'Ultrabeam/SteppIR. (Pour un seul Rotator Genius pilotant deux rotors, réglez les deux sur Rotator Genius avec le même hôte et le rotator n° 1 et 2.)', 'rot.rgHint': 'Parle directement à un Rotator Genius 4O3A en TCP (port 9006 par défaut) — sans PstRotator. Le n° choisit lequel des deux rotators du boîtier piloter.', 'rot.arcoHint': "Parle directement à tout contrôleur réglé sur Yaesu GS-232A — sans PstRotator. microHAM ARCO : régler Config → LAN → CONTROL PROTOCOL (ou USB CONTROL PROTOCOL) sur « Yaesu GS-232A » ; en USB la vitesse est sans importance. ERC (Easy Rotor Control, ERC Mini compris) : son émulation DOIT être réglée sur GS-232 — un ERC laissé en Hy-Gain DCU-1 parle un autre jeu de commandes et ne répondra pas — puis choisir son port COM et la même vitesse que dans la configuration de l'ERC.", 'rot.dcu1Hint': "Parle le jeu de commandes Hy-Gain DCU-1 (RotorCard DXA, Idiom Press Rotor-EZ, Green Heron). Connexion via le port COM du contrôleur (un DCU-1 est à 4800 bauds ; RotorCard/Green Heron peuvent différer — reprendre la vitesse du contrôleur) ou en TCP via un pont série-sur-IP. Azimut uniquement, pas d'élévation. Nouveau pilote — signalez si votre contrôleur nécessite une autre commande ou vitesse.", 'rot.hint': "OpsLog envoie des commandes UDP à PstRotator. Active l'écouteur UDP de PstRotator (Setup → Communication → UDP) avant de tester.", 'extsvc.hint': "Envoie les QSO enregistrés vers des carnets en ligne. Chaque service upload automatiquement à chaque nouveau QSO si activé ; le délai est propre à chaque service (immédiat, ou 1–2 min pour corriger un QSO mal saisi avant).", 'hw.motorTxInhibit': "Inhiber la transmission pendant que l'antenne bouge", 'hw.motorTxInhibitHint': "Empêche le FlexRadio d'émettre pendant que les éléments bougent (nécessite le FlexRadio en API + cette antenne activée). Sans effet avec les autres radios.", 'hw.motorAntenna': 'Antenne motorisée', 'hw.motorEnable': "Activer le contrôle de l'antenne", 'hw.motorType': "Type d'antenne", 'hw.motorTransport': 'Connexion', 'hw.motorTcp': 'Réseau (TCP)', 'hw.motorSerial': 'Série (COM)', 'hw.motorCom': 'Port série', 'hw.motorComUb': '(2e port du câble USB)', 'hw.motorBaud': 'Débit', 'hw.steppirHint': "Les contrôleurs SteppIR sont en RS-232 série (port DB9 « DATA OUT »). Série = un adaptateur USB↔RS-232 (FTDI), vu comme un port COM. Réseau = un pont série-Ethernet (comme pour l'Ultrabeam).", 'hw.steppirRange': 'Plage accordable', 'hw.steppirRangeHint': "La couverture en fréquence de la SteppIR. Sur une bande hors de cette plage (p. ex. 30 m avec une SteppIR 20 m-6 m), OpsLog n'essaie pas d'accorder l'antenne et n'inhibe pas l'émission. Défaut 13-54 MHz (20 m-6 m) ; abaisse la borne basse (p. ex. 6) pour une SteppIR équipée 40 m.", 'hw.motorBands': 'Bandes couvertes', 'hw.motorStep': 'Pas de réaccord', 'hw.motorBandFreqHint': "Fréquence sur laquelle chaque bouton de bande accorde l'antenne (kHz). Laisser vide pour le défaut affiché.", 'hw.motorFollow': "Suivre la fréquence du rig (accord auto de l'antenne)", 'hw.ultrabeam': 'Antenne (Ultrabeam)', 'hw.audioVoice': 'Périphériques audio & manipulateur vocal', - 'cat.radioMyRig': 'MY_RIG', 'cat.radioMyRigPh': 'ex. IC-7610 + PGXL', 'cat.radioMyRigHint': "Inscrit dans MY_RIG sur chaque QSO fait avec cette radio, avant la station par bande des Conditions de trafic — celle-ci dit ce qui était prévu, celle-là dit quelle radio émet. Laisser vide conserve l'ancien comportement.", 'cat.radio': 'Radio', 'cat.radioNamePh': 'Nom (ex. FTDX10)', 'cat.radioAddHint': 'Ajouter une radio, copiée sur celle-ci', 'cat.radioRemoveHint': 'Supprimer cette radio', 'cat.radioHint': "Tout ce qui suit configure la radio sélectionnée. On passe de l'une à l'autre par le bouton CAT de la barre d'état — le carnet, l'indicatif et le reste de la station ne bougent pas.", 'cat.enable': 'Activer le CAT', 'cat.brand': 'Radio', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un autre logiciel atteint alors la radio à travers OpsLog — avec tous les backends, pas seulement les natifs. Pour Hamlib, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532 ; pour TCI, pointez le logiciel sur 127.0.0.1:40001.", 'cat.shareProto': 'Protocole', 'cat.shareRigctl': 'Hamlib NET rigctl — WSJT-X, JTDX, MSHV, Log4OM', 'cat.shareTci': 'TCI — Expert Electronics', 'cat.shareTciClash': 'Le backend CAT est aussi en TCI : ExpertSDR occupe probablement déjà le port 40001 sur ce PC. Donnez un autre port au serveur, ou partagez en Hamlib.', 'cat.sharePort': 'Port de partage', 'cat.pttKey': 'Activer la touche PTT', 'cat.pttKeyPress': 'Appuyez sur une touche…', 'cat.pttKeyNone': 'Cliquez pour définir une touche', 'cat.pttKeyClear': 'Effacer', 'cat.pttKeyToggle': 'Mode bascule (appui = émission, nouvel appui = arrêt)', 'cat.pttKeyHint': "Quand OpsLog a le focus, cette touche passe la radio en émission — maintenue par défaut (relâcher pour arrêter), ou verrouillée en mode bascule. Elle utilise la méthode PTT de Audio → PTT (CAT / RTS / DTR), avec repli sur le CAT. Choisissez une touche que vous ne tapez jamais en journalisant (ex. Pause, Arrêt défil., ou une pédale mappée dessus) — OpsLog l'intercepte pour qu'elle n'atterrisse pas dans un champ.", 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.xieguPTTLine': 'Passage en \u00e9mission', 'cat.xieguPTTCiv': 'Commande CI-V', 'cat.xieguPTTHint': 'Un G90 ne passe pas en \u00e9mission sur la commande CI-V : les interfaces comme le DE-19 le pilotent par RTS ou DTR. Choisissez la ligne de la v\u00f4tre \u2014 c\u2019est aussi ce qui permet \u00e0 WSJT-X d\u2019\u00e9mettre via le partage CAT.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.optElecraft': 'Elecraft K3/K4 (USB, réseau)', 'cat.elecraftHint': 'Les modes numériques passent automatiquement en DATA A (MD6+DT0) — le sous-mode dont l’audio FT8 a besoin.', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kwLink': 'Connexion', 'cat.kwLinkBridge': 'RS-232 vers Ethernet (pont s\u00e9rie)', 'cat.kwLinkNative': 'Protocole r\u00e9seau propre \u00e0 la radio', 'cat.kwLinkNativeHint': "Pas encore pris en charge. C'est une session avec son propre encapsulage et son identification, pas le flux CAT dans une socket : cela s'impl\u00e9mente radio par radio, et face \u00e0 une vraie. En attendant : USB, ou un pont s\u00e9rie-Ethernet.", 'cat.kwLinkUsb': 'USB / série', 'cat.kwLinkNet': 'Réseau', 'cat.kenwoodHostHint': "L'option réseau transporte les MÊMES commandes CAT en TCP au lieu d'un câble : un pont série-réseau (ser2net, adaptateur Ethernet-série, Raspberry Pi au shack), ou une radio qui expose son port CAT brut. Ce n'est PAS du Hamlib — le port 4532 est celui de rigctld, un autre protocole, et c'est celui qu'OpsLog lui-même PROPOSE sous « Partager le CAT ».", 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.lowerLines': 'Abaisser les lignes DTR et RTS à la connexion', 'cat.yaesuRttyUsb': 'RTTY en USB (RTTY-U)', 'cat.yaesuRttyUsbHint': '— l’ADIF n’enregistre que « RTTY » et le poste a les deux bandes latérales. Décoché, le poste passe en RTTY-L, la convention ancienne ; cochez si votre interface FSK ou votre décodeur attend la supérieure.', 'cat.lowerLinesHint': 'Si votre radio est toujours en émission, cochez ceci.', 'cat.kwDataMode': 'Modes data (FT8/PSK…)', 'cat.kwDataUsb': 'USB', 'cat.kwDataMd6': 'DATA A — MD6+DT0 (Elecraft K3/K4)', 'cat.kwDataKeep': 'Ne pas changer le mode de la radio', 'cat.kwDataHint': "Ce qu'OpsLog règle sur la radio pour un mode data. Aucune commande unique ne convient à toutes : un Elecraft K3/K4 veut DATA (MD6) ; sur un TS-590SG/TS-990S le mode data est un modificateur d'USB réglé sur la radio, choisissez donc USB ou, plus sûr, « Ne pas changer » et passez la radio en DATA vous-même. En MD6 un Kenwood classique (TS-590/990) tomberait en FSK/RTTY — à ne pas utiliser là.", 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9', + 'cat.radioMyRig': 'MY_RIG', 'cat.radioMyRigPh': 'ex. IC-7610 + PGXL', 'cat.radioMyRigHint': "Inscrit dans MY_RIG sur chaque QSO fait avec cette radio, avant la station par bande des Conditions de trafic — celle-ci dit ce qui était prévu, celle-là dit quelle radio émet. Laisser vide conserve l'ancien comportement.", 'cat.radio': 'Radio', 'cat.radioNamePh': 'Nom (ex. FTDX10)', 'cat.radioAddHint': 'Ajouter une radio, copiée sur celle-ci', 'cat.radioRemoveHint': 'Supprimer cette radio', 'cat.radioHint': "Tout ce qui suit configure la radio sélectionnée. On passe de l'une à l'autre par le bouton CAT de la barre d'état — le carnet, l'indicatif et le reste de la station ne bougent pas.", 'cat.disabledNotice': 'Le CAT est désactivé. Tout ce qui suit peut être juste — la radio, l’adresse, un détecteur qui l’a trouvée par son nom — rien ne se connectera tant que la case ci-dessus n’est pas cochée.', 'cat.enable': 'Activer le CAT', 'cat.brand': 'Radio', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un autre logiciel atteint alors la radio à travers OpsLog — avec tous les backends, pas seulement les natifs. Pour Hamlib, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532 ; pour TCI, pointez le logiciel sur 127.0.0.1:40001.", 'cat.shareProto': 'Protocole', 'cat.shareRigctl': 'Hamlib NET rigctl — WSJT-X, JTDX, MSHV, Log4OM', 'cat.shareTci': 'TCI — Expert Electronics', 'cat.shareTciClash': 'Le backend CAT est aussi en TCI : ExpertSDR occupe probablement déjà le port 40001 sur ce PC. Donnez un autre port au serveur, ou partagez en Hamlib.', 'cat.sharePort': 'Port de partage', 'cat.pttKey': 'Activer la touche PTT', 'cat.pttKeyPress': 'Appuyez sur une touche…', 'cat.pttKeyNone': 'Cliquez pour définir une touche', 'cat.pttKeyClear': 'Effacer', 'cat.pttKeyToggle': 'Mode bascule (appui = émission, nouvel appui = arrêt)', 'cat.pttKeyHint': "Quand OpsLog a le focus, cette touche passe la radio en émission — maintenue par défaut (relâcher pour arrêter), ou verrouillée en mode bascule. Elle utilise la méthode PTT de Audio → PTT (CAT / RTS / DTR), avec repli sur le CAT. Choisissez une touche que vous ne tapez jamais en journalisant (ex. Pause, Arrêt défil., ou une pédale mappée dessus) — OpsLog l'intercepte pour qu'elle n'atterrisse pas dans un champ.", 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.xieguPTTLine': 'Passage en \u00e9mission', 'cat.xieguPTTCiv': 'Commande CI-V', 'cat.xieguPTTHint': 'Un G90 ne passe pas en \u00e9mission sur la commande CI-V : les interfaces comme le DE-19 le pilotent par RTS ou DTR. Choisissez la ligne de la v\u00f4tre \u2014 c\u2019est aussi ce qui permet \u00e0 WSJT-X d\u2019\u00e9mettre via le partage CAT.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.optElecraft': 'Elecraft K3/K4 (USB, réseau)', 'cat.elecraftHint': 'Les modes numériques passent automatiquement en DATA A (MD6+DT0) — le sous-mode dont l’audio FT8 a besoin.', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kwLink': 'Connexion', 'cat.kwLinkBridge': 'RS-232 vers Ethernet (pont s\u00e9rie)', 'cat.kwLinkNative': 'Protocole r\u00e9seau propre \u00e0 la radio', 'cat.kwLinkNativeHint': "Pas encore pris en charge. C'est une session avec son propre encapsulage et son identification, pas le flux CAT dans une socket : cela s'impl\u00e9mente radio par radio, et face \u00e0 une vraie. En attendant : USB, ou un pont s\u00e9rie-Ethernet.", 'cat.kwLinkUsb': 'USB / série', 'cat.kwLinkNet': 'Réseau', 'cat.kenwoodHostHint': "L'option réseau transporte les MÊMES commandes CAT en TCP au lieu d'un câble : un pont série-réseau (ser2net, adaptateur Ethernet-série, Raspberry Pi au shack), ou une radio qui expose son port CAT brut. Ce n'est PAS du Hamlib — le port 4532 est celui de rigctld, un autre protocole, et c'est celui qu'OpsLog lui-même PROPOSE sous « Partager le CAT ».", 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.lowerLines': 'Abaisser les lignes DTR et RTS à la connexion', 'cat.yaesuRttyUsb': 'RTTY en USB (RTTY-U)', 'cat.yaesuRttyUsbHint': '— l’ADIF n’enregistre que « RTTY » et le poste a les deux bandes latérales. Décoché, le poste passe en RTTY-L, la convention ancienne ; cochez si votre interface FSK ou votre décodeur attend la supérieure.', 'cat.lowerLinesHint': 'Si votre radio est toujours en émission, cochez ceci.', 'cat.kwDataMode': 'Modes data (FT8/PSK…)', 'cat.kwDataUsb': 'USB', 'cat.kwDataMd6': 'DATA A — MD6+DT0 (Elecraft K3/K4)', 'cat.kwDataKeep': 'Ne pas changer le mode de la radio', 'cat.kwDataHint': "Ce qu'OpsLog règle sur la radio pour un mode data. Aucune commande unique ne convient à toutes : un Elecraft K3/K4 veut DATA (MD6) ; sur un TS-590SG/TS-990S le mode data est un modificateur d'USB réglé sur la radio, choisissez donc USB ou, plus sûr, « Ne pas changer » et passez la radio en DATA vous-même. En MD6 un Kenwood classique (TS-590/990) tomberait en FSK/RTTY — à ne pas utiliser là.", 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9', 'cat.icomNetHost': 'IP / nom d\'hôte du poste', 'cat.icomNetUser': 'Utilisateur réseau (ID)', 'cat.icomNetPass': 'Mot de passe réseau', 'cat.icomNetHint': "Se connecte directement au serveur LAN intégré du poste — sans RS-BA1 ni Remote Utility (ferme-les d'abord). Utilise l'ID/mot de passe Network User1 configurés dans le menu Network du poste. Un poste en veille est allumé automatiquement.", 'cat.icomNetListen': 'Écouter dans les enceintes', 'cat.icomNetListenHint': 'Décochez pour garder le flux silencieux — enregistrements et voice keyer fonctionnent toujours. Même interrupteur que le bouton haut-parleur de la console Icom.', 'cat.icomNetAudio': 'Diffuser l’audio RX par le réseau (expérimental)',