feat(tci): key CW through the radio's own macro keyer

The sixth CW engine, and the one the TCI backend was left without. A SunSDR
keys from the WebSocket that already carries the CAT: no WinKeyer, no second
serial port, nothing to wire.

    CW_MACROS:0,<text>;     send
    CW_MACROS_SPEED:<wpm>;  speed
    CW_MACROS_STOP;         abort

Confirmed against the TCI command table in ars-ka0s/eesdr-tci — the source that
settled SPOT. CW_MACROS rather than TCI 2.0's CW_MSG: it exists from 1.6, and
OpsLog resolves its own variables, so the before/after callsign fields have
nothing to carry.

Commas and semicolons are stripped before sending. They are the protocol's own
separators: a comma would become another argument, a semicolon would end the
command with the message half keyed and the rest parsed as a command.

Only the MACRO speed is set, not the paddle keyer's — an operator who set their
paddle to 28 wpm did not ask for it to change because a macro went out at 25.
And there is no backspace: TCI can stop a message but cannot un-type one, so the
type-ahead correction the Flex engine offers is absent rather than faked.

frontend/src/App.tsx

@@ -41,6 +41,7 @@ import {
   IcomSendCW, YaesuSendCW, YaesuStopCW, SetYaesuKeySpeed, IcomStopCW, IcomSetKeySpeed, IcomSetBreakIn, GetIcomState,
   KenwoodSendCW, KenwoodStopCW, SetKenwoodKeySpeed,
   FlexSendCW, FlexStopCW, FlexSetKeySpeed, FlexBackspaceCW,
+  TCISendCW, TCIStopCW, TCISetKeySpeed,
   GetDVKMessages, GetDVKStatus, DVKPlay, DVKStop,
   StartCWDecoder, StopCWDecoder, SetCWDecoderPitch,
   ChatAvailable, GetChatHistory, SendChatMessage, GetOnlineOperators,
@@ -1490,7 +1491,7 @@ export default function App() {
   // CI-V 0x17 (no extra hardware — sends over the CAT connection). Macros,
   // auto-call and <LOGQSO> are shared; only the transport differs.
   const [wkEngine, setWkEngine] = useState<string>('winkeyer');
-  const cwSource: 'winkeyer' | 'icom' | 'flex' | 'yaesu' | 'kenwood' = wkEngine === 'icom' ? 'icom' : wkEngine === 'flex' ? 'flex' : wkEngine === 'yaesu' ? 'yaesu' : wkEngine === 'kenwood' ? 'kenwood' : 'winkeyer';
+  const cwSource: 'winkeyer' | 'icom' | 'flex' | 'yaesu' | 'kenwood' | 'tci' = wkEngine === 'icom' ? 'icom' : wkEngine === 'flex' ? 'flex' : wkEngine === 'yaesu' ? 'yaesu' : wkEngine === 'kenwood' ? 'kenwood' : wkEngine === 'tci' ? 'tci' : 'winkeyer';
   // Setting the CW speed has to reach the keyer that is ACTUALLY sending, and
   // both the CW panel and the Yaesu console can ask for it. With DTR/RTS line
   // keying the PC does the timing, so the rig's internal keyer speed changes
@@ -1504,6 +1505,7 @@ export default function App() {
     else if (src === 'flex') FlexSetKeySpeed(w).catch(() => {});
     else if (src === 'yaesu') SetYaesuKeySpeed(w).catch(() => {});
     else if (src === 'kenwood') SetKenwoodKeySpeed(w).catch(() => {});
+    else if (src === 'tci') TCISetKeySpeed(w).catch(() => {});
     else WinkeyerSetSpeed(w).catch(() => {});
     // The rig's own keyer follows too whenever a Yaesu is on CAT, even when it is
     // not the sending engine: its front panel and OpsLog then agree.
@@ -1548,6 +1550,7 @@ export default function App() {
       : cwSource === 'flex' ? (catState.backend === 'flex' && catState.connected)
       : cwSource === 'yaesu' ? (catState.backend === 'yaesu' && catState.connected)
       : cwSource === 'kenwood' ? (catState.backend === 'kenwood' && catState.connected)
+      : cwSource === 'tci' ? (catState.backend === 'tci' && catState.connected)
       : wkStatus.connected;
     wkActiveRef.current = wkEnabled && connected;
   }, [wkEnabled, wkStatus.connected, cwSource, catState.backend, catState.connected]);
@@ -3968,7 +3971,7 @@ export default function App() {
     // segment AFTER the <LOGQSO> (which logs and clears the form) still expands its
     // variables correctly.
     const parts = rawText.split(/<LOGQSO>/i).map((pt) => resolveCW(pt));
-    const isRig = cwSourceRef.current === 'icom' || cwSourceRef.current === 'flex' || cwSourceRef.current === 'yaesu' || cwSourceRef.current === 'kenwood';
+    const isRig = cwSourceRef.current === 'icom' || cwSourceRef.current === 'flex' || cwSourceRef.current === 'yaesu' || cwSourceRef.current === 'kenwood' || cwSourceRef.current === 'tci';
     for (let p = 0; p < parts.length; p++) {
       if (aborted()) return; // ESC / Stop before this segment → stop sending, don't log
       const resolved = parts[p];
@@ -3980,7 +3983,7 @@ export default function App() {
         // current WPM, so it scales automatically.
         const keyed = resolved + ' ';
         setWkSent(resolved);
-        const sendFn = cwSourceRef.current === 'flex' ? FlexSendCW : cwSourceRef.current === 'icom' ? IcomSendCW : cwSourceRef.current === 'yaesu' ? YaesuSendCW : cwSourceRef.current === 'kenwood' ? KenwoodSendCW : null;
+        const sendFn = cwSourceRef.current === 'flex' ? FlexSendCW : cwSourceRef.current === 'icom' ? IcomSendCW : cwSourceRef.current === 'yaesu' ? YaesuSendCW : cwSourceRef.current === 'kenwood' ? KenwoodSendCW : cwSourceRef.current === 'tci' ? TCISendCW : null;
         if (sendFn) await sendFn(keyed).catch((e) => setError(String(e?.message ?? e)));
         else await WinkeyerSend(keyed).catch((e) => setError(String(e?.message ?? e)));
         // WAIT for THIS segment's CW to finish before moving on — so a <LOGQSO>
@@ -4023,6 +4026,7 @@ export default function App() {
     else if (cwSourceRef.current === 'flex') FlexStopCW().catch(() => {});
     else if (cwSourceRef.current === 'yaesu') YaesuStopCW().catch(() => {});
     else if (cwSourceRef.current === 'kenwood') KenwoodStopCW().catch(() => {});
+    else if (cwSourceRef.current === 'tci') TCIStopCW().catch(() => {});
     else WinkeyerStop().catch(() => {});
   }
   // runAutoCall sends macro i, waits for the keyer to finish, waits the chosen
@@ -4071,6 +4075,10 @@ export default function App() {
   // send-on-type: key the typed chars verbatim (no variable substitution).
   function wkSendRaw(chars: string) {
     if (cwSourceRef.current === 'flex') { FlexSendCW(chars).catch(() => {}); return; }
+    // TCI keys the character as a macro of its own. There is no un-typing it
+    // afterwards — the radio can stop the message but not shorten it — so the
+    // backspace below leaves the TCI engine alone rather than pretending.
+    if (cwSourceRef.current === 'tci') { TCISendCW(chars).catch(() => {}); return; }
     WinkeyerSend(chars).catch(() => {});
   }
   function wkBackspace() {