feat(flex): edit the split chaser's marker on the panel
The marker text is chosen in the skimmer, and the two have to agree or nothing fires -- so it belongs next to the switch, not in a settings page the operator would have to remember exists. Kept as raw text until blur: it is a comma-separated list and normalising each keystroke would eat the comma as it is typed.
This commit is contained in:
+4
-2
@@ -12,7 +12,8 @@
|
||||
"Awards: 'county' joins the searchable QSO fields — the CNTY field as it stands. The existing 'us_county' keys the county to its state, which is right for the United States and wrong everywhere else: an RDA district or a Japanese city code is already unique.",
|
||||
"FlexRadio: a split pile-up chaser. When a CW skimmer (SDC) marks a report on the panadapter, OpsLog moves the TRANSMIT slice there — where the DX was listening a second ago — with a signed offset in Hz. The receive slice never moves. The marker text is yours to set (599 by default, whatever SDC is configured to write), and the button lives on the FlexRadio panel next to SPLIT, not in a settings page.",
|
||||
"The radio's spot feed is now subscribed to even when OpsLog draws no spots of its own — that feed is how another program's spots arrive. Clearing the panadapter at connect still only happens when the overlay is OpsLog's: 'spot clear' removes every spot on the radio, a skimmer's included.",
|
||||
"Fixed the split chaser reading its own switch from the wrong key, so it stayed off however many times it was turned on. A recognised marker that is nonetheless ignored now says why in the log."
|
||||
"Fixed the split chaser reading its own switch from the wrong key, so it stayed off however many times it was turned on. A recognised marker that is nonetheless ignored now says why in the log.",
|
||||
"The split chaser's marker text is editable on the panel, beside the offset. It has to match what SDC is set to write, and several can be listed — add the old-report marker to chase those too."
|
||||
],
|
||||
"fr": [
|
||||
"Édition de QSO : HAMLOG.online rejoint l'onglet QSL Info — son propre canal dans la liste, avec envoyé/reçu et les deux dates, et une ligne dans le tableau de statut. Ses quatre colonnes passent aussi du groupe QSL au groupe Uploads, à côté de Club Log et QRZ.com.",
|
||||
@@ -24,7 +25,8 @@
|
||||
"Diplômes : « county » rejoint les champs de QSO interrogeables — le champ CNTY tel quel. Le « us_county » existant associe le comté à son État, ce qui est juste aux États-Unis et faux ailleurs : un district RDA ou un code de ville japonais est déjà unique.",
|
||||
"FlexRadio : chasseur de pile-up en split. Quand un skimmer CW (SDC) marque un report sur le panadapter, OpsLog déplace la slice d'ÉMISSION dessus — là où le DX écoutait une seconde plus tôt — avec un décalage signé en Hz. La slice de réception ne bouge jamais. Le texte du marqueur se règle (599 par défaut, ce que SDC est configuré à écrire), et le bouton est sur le panneau FlexRadio à côté de SPLIT, pas dans les réglages.",
|
||||
"Le flux de spots de la radio est désormais suivi même si OpsLog n'affiche aucun spot : c'est par lui qu'arrivent les spots des autres programmes. Le nettoyage du panadapter à la connexion reste réservé au cas où l'affichage est celui d'OpsLog : « spot clear » efface tous les spots de la radio, y compris ceux d'un skimmer.",
|
||||
"Correction : le chasseur de pile-up lisait son propre interrupteur sous une mauvaise clé et restait donc éteint quel que soit le nombre de fois où on l'allumait. Un marqueur reconnu mais ignoré indique désormais pourquoi dans le journal."
|
||||
"Correction : le chasseur de pile-up lisait son propre interrupteur sous une mauvaise clé et restait donc éteint quel que soit le nombre de fois où on l'allumait. Un marqueur reconnu mais ignoré indique désormais pourquoi dans le journal.",
|
||||
"Le texte du marqueur du chasseur de pile-up se modifie sur le panneau, à côté du décalage. Il doit correspondre à ce que SDC est réglé à écrire, et on peut en lister plusieurs — ajoute le marqueur des reports anciens pour les chasser aussi."
|
||||
]
|
||||
},
|
||||
{
|
||||
|
||||
@@ -310,10 +310,14 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
|
||||
const [rstChase, setRstChase] = useState<{ enabled: boolean; markers: string; offset_hz: number; split_only: boolean }>(
|
||||
{ enabled: false, markers: '599', offset_hz: 0, split_only: true });
|
||||
const [rstChaseOffsetText, setRstChaseOffsetText] = useState('0');
|
||||
// The marker text is edited as raw text and only parsed on blur: it is a
|
||||
// comma-separated list, and normalising it on every keystroke would eat the
|
||||
// comma the moment it is typed.
|
||||
const [rstChaseMarkersText, setRstChaseMarkersText] = useState('599');
|
||||
useEffect(() => {
|
||||
GetFlexRSTChase().then((c: any) => {
|
||||
if (!c) return;
|
||||
setRstChase(c); setRstChaseOffsetText(String(c.offset_hz ?? 0));
|
||||
setRstChase(c); setRstChaseOffsetText(String(c.offset_hz ?? 0)); setRstChaseMarkersText(String(c.markers ?? '599'));
|
||||
}).catch(() => {});
|
||||
}, []);
|
||||
const [st, setSt] = useState<FlexState>(ZERO);
|
||||
@@ -676,6 +680,25 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
|
||||
rstChase.enabled ? 'bg-success text-success-foreground border-success shadow-[0_0_12px] shadow-success/50' : 'bg-card text-success border-success hover:bg-success-muted')}>
|
||||
{rstChase.markers.split(',')[0].trim() || '599'}
|
||||
</button>
|
||||
{rstChase.enabled && (
|
||||
<label className="flex items-center gap-1 text-[11px] text-muted-foreground whitespace-nowrap">
|
||||
{/* The marker is whatever SDC was told to write — "599", "5NN",
|
||||
or several. Editable here rather than in a settings page
|
||||
because it is chosen in the skimmer, and the two have to
|
||||
agree or nothing ever fires. */}
|
||||
{t('flxp.rstChaseMarker')}
|
||||
<input type="text" value={rstChaseMarkersText}
|
||||
onChange={(e) => setRstChaseMarkersText(e.target.value)}
|
||||
onBlur={() => {
|
||||
const v = rstChaseMarkersText.trim() || '599';
|
||||
setRstChaseMarkersText(v);
|
||||
const next = { ...rstChase, markers: v };
|
||||
setRstChase(next); SaveFlexRSTChase(next as any).catch(() => {});
|
||||
}}
|
||||
title={t('flxp.rstChaseMarkerHint')}
|
||||
className="w-20 h-6 rounded border border-input bg-background px-1 text-[11px] font-mono uppercase" />
|
||||
</label>
|
||||
)}
|
||||
{rstChase.enabled && (
|
||||
<label className="flex items-center gap-1 text-[11px] text-muted-foreground whitespace-nowrap">
|
||||
{t('flxp.rstChaseOffset')}
|
||||
|
||||
@@ -426,7 +426,7 @@ const en: Dict = {
|
||||
'tgp.online': 'online', 'tgp.offline': 'offline', 'tgp.close': 'Close', 'tgp.connecting': 'Connecting…', 'tgp.swr': 'SWR', 'tgp.power': 'Fwd power', 'tgp.tune': 'Tune', 'tgp.tuning': 'Tuning…', 'tgp.tuneHint': 'Start an automatic tuning cycle on the active channel — key the rig into a carrier so the tuner can measure SWR', 'tgp.bypass': 'Bypass', 'tgp.bypassHint': 'Toggle global bypass — route the antenna straight through, tuner out of line', 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Toggle Operate / Standby',
|
||||
'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Channel {letter} — active', 'tgp.chSelect': 'Make channel {letter} active', 'tgp.chActiveTag': 'active', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypassed', 'tgp.inLine': 'In line',
|
||||
'flxp.ritHint': 'RIT — shifts your RECEIVE frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.', 'flxp.xitHint': 'XIT — shifts your TRANSMIT frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.',
|
||||
'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.rstChaseHint': 'Chase the pile-up: when the CW skimmer marks a report ({m}) on the panadapter, move the TRANSMIT slice there — that is where the DX was listening a second ago. The receive slice never moves.', 'flxp.rstChaseOffset': 'offset', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
|
||||
'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.rstChaseHint': 'Chase the pile-up: when the CW skimmer marks a report ({m}) on the panadapter, move the TRANSMIT slice there — that is where the DX was listening a second ago. The receive slice never moves.', 'flxp.rstChaseMarker': 'marker', 'flxp.rstChaseMarkerHint': 'The text the skimmer writes for a report — whatever SDC is set to send (599, 5NN…). Several can be given, separated by commas; add the old-report marker to chase those too.', 'flxp.rstChaseOffset': 'offset', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
|
||||
'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.atuTune': 'TUNE', 'flxp.atuTuneHint': 'Start a tuning cycle on the built-in ATU. The radio keys a carrier itself to measure the match.', 'flxp.atuBypass': 'BYPASS', 'flxp.atuBypassHint': 'Take the ATU out of line (straight through).', 'flxp.atuMem': 'MEM', 'flxp.atuMemHint': 'Reuse the stored tuning solution for this frequency instead of tuning again.', 'flxp.atuIdle': 'not tuned', 'flxp.atuTuning': 'tuning…', 'flxp.atuOk': 'tuned', 'flxp.atuFail': 'TUNE FAILED', 'flxp.atuBypassed': 'bypassed', 'flxp.atuAborted': 'aborted', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER', 'flxp.outputPower': 'OUTPUT POWER', 'flxp.speOffline': 'SPE offline', 'flxp.acomOffline': 'ACOM offline', 'flxp.ampPick': 'Choose which amplifier this card shows', 'flxp.dspV4Hint': 'SmartSDR v4 DSP (8000/Aurora series)', 'flxp.daxHint': 'DAX as the transmit audio source (SmartSDR transmit-bar DAX button) — for WSJT-X & co', 'flxp.rnnHint': 'RNN — AI noise reduction (on/off)', 'flxp.anftHint': 'ANFT — FFT-based automatic notch filter (on/off)', 'flxp.dspNoise': 'Noise', 'flxp.dspMore': 'Show/hide advanced DSP (WNB, v4 NR/notch)',
|
||||
'icmp.spectrum': 'Spectrum', 'icmp.scopeFixed': 'Fixed — double-click / wheel to tune', 'icmp.scopeCenter': 'Center — follows VFO', 'icmp.scopeOff': 'Scope off', 'icmp.scopePanDown': 'Shift scope −50 kHz', 'icmp.scopePanUp': 'Shift scope +50 kHz', 'icmp.scopeCenterVfo': 'Center scope on the current frequency (±50 kHz)', 'icmp.notConnected': "Icom not connected. Enable the Icom CI-V backend in Settings → CAT and connect the radio's USB port.", 'icmp.refresh': 'Refresh', 'icmp.meters': 'Meters', 'icmp.transmit': 'Transmit', 'icmp.power': 'Power', 'icmp.mic': 'Mic', 'icmp.receive': 'Receive', 'icmp.preamp': 'Preamp', 'icmp.filter': 'Filter', 'icmp.noiseNotch': 'Noise / Notch', 'icmp.autoNotch': 'Auto notch filter', 'icmp.apf': 'Audio peak filter (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Wheel or ± to shift · Ctrl+←/→ shifts RIT when active', 'icmp.bandsAntenna': 'Bands & Antenna', 'icmp.bandCurrent': 'The rig is on {b} m', 'icmp.antenna': 'Antenna', 'icmp.passband': 'Passband / Notch', 'icmp.pbtCenter': 'Center PBT', 'icmp.manualNotch': 'Manual notch — MN on, then set position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Power the radio ON (boots ~15 s)', 'icmp.powerOffHint': 'Power the radio OFF', 'icmp.powerOffConfirm': 'Switch the radio OFF?',
|
||||
'rst.clickToFill': 'Click to set RST tx from the signal',
|
||||
@@ -898,7 +898,7 @@ const fr: Dict = {
|
||||
'tgp.online': 'en ligne', 'tgp.offline': 'hors ligne', 'tgp.close': 'Fermer', 'tgp.connecting': 'Connexion…', 'tgp.swr': 'ROS', 'tgp.power': 'Puiss. directe', 'tgp.tune': 'Accord', 'tgp.tuning': 'Accord…', 'tgp.tuneHint': "Lancer un cycle d'accord automatique sur le canal actif — passe la radio en porteuse pour que le coupleur mesure le ROS", 'tgp.bypass': 'Bypass', 'tgp.bypassHint': "Basculer le bypass global — antenne en direct, coupleur hors ligne", 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Basculer Operate / Standby',
|
||||
'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Canal {letter} — actif', 'tgp.chSelect': 'Activer le canal {letter}', 'tgp.chActiveTag': 'actif', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypass', 'tgp.inLine': 'En ligne',
|
||||
'flxp.ritHint': "RIT — décale uniquement ta fréquence de RÉCEPTION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.", 'flxp.xitHint': "XIT — décale uniquement ta fréquence d'ÉMISSION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.",
|
||||
'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.rstChaseHint': "Chasser le pile-up : quand le skimmer CW marque un report ({m}) sur le panadapter, déplacer la slice d'ÉMISSION dessus — c'est là que le DX écoutait il y a une seconde. La slice de réception ne bouge jamais.", 'flxp.rstChaseOffset': 'décalage', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
|
||||
'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.rstChaseHint': "Chasser le pile-up : quand le skimmer CW marque un report ({m}) sur le panadapter, déplacer la slice d'ÉMISSION dessus — c'est là que le DX écoutait il y a une seconde. La slice de réception ne bouge jamais.", 'flxp.rstChaseMarker': 'marqueur', 'flxp.rstChaseMarkerHint': "Le texte que le skimmer écrit pour un report — ce que SDC est réglé à envoyer (599, 5NN…). On peut en mettre plusieurs, séparés par des virgules ; ajoute le marqueur des reports anciens pour les chasser aussi.", 'flxp.rstChaseOffset': 'décalage', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
|
||||
'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.atuTune': 'ACCORD', 'flxp.atuTuneHint': "Lance un cycle d'accord sur le coupleur intégré. La radio émet elle-même une porteuse pour mesurer l'adaptation.", 'flxp.atuBypass': 'BYPASS', 'flxp.atuBypassHint': 'Sort le coupleur de la ligne (passage direct).', 'flxp.atuMem': 'MEM', 'flxp.atuMemHint': "Réutilise l'accord mémorisé pour cette fréquence au lieu de refaire un cycle.", 'flxp.atuIdle': 'non accordé', 'flxp.atuTuning': 'accord en cours…', 'flxp.atuOk': 'accordé', 'flxp.atuFail': 'ÉCHEC ACCORD', 'flxp.atuBypassed': 'contourné', 'flxp.atuAborted': 'interrompu', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR', 'flxp.outputPower': 'PUISSANCE DE SORTIE', 'flxp.speOffline': 'SPE hors ligne', 'flxp.acomOffline': 'ACOM hors ligne', 'flxp.ampPick': 'Choisir quel amplificateur cette carte affiche', 'flxp.dspV4Hint': 'DSP SmartSDR v4 (séries 8000/Aurora)', 'flxp.daxHint': "DAX comme source audio d'émission (bouton DAX du bandeau transmit de SmartSDR) — pour WSJT-X & co", 'flxp.rnnHint': 'RNN — réduction de bruit par IA (on/off)', 'flxp.anftHint': 'ANFT — filtre notch automatique FFT (on/off)', 'flxp.dspNoise': 'Bruit', 'flxp.dspMore': 'Afficher/masquer le DSP avancé (WNB, NR/notch v4)',
|
||||
'icmp.spectrum': 'Spectre', 'icmp.scopeFixed': 'Fixe — double-clic / molette pour accorder', 'icmp.scopeCenter': 'Centré — suit le VFO', 'icmp.scopeOff': 'Scope éteint', 'icmp.scopePanDown': 'Décaler le scope −50 kHz', 'icmp.scopePanUp': 'Décaler le scope +50 kHz', 'icmp.scopeCenterVfo': 'Centrer le scope sur la fréquence actuelle (±50 kHz)', 'icmp.notConnected': 'Icom non connecté. Active le backend CI-V Icom dans Réglages → CAT et connecte le port USB de la radio.', 'icmp.refresh': 'Rafraîchir', 'icmp.meters': 'Mesures', 'icmp.transmit': 'Émission', 'icmp.power': 'Puissance', 'icmp.mic': 'Micro', 'icmp.receive': 'Réception', 'icmp.preamp': 'Préampli', 'icmp.filter': 'Filtre', 'icmp.noiseNotch': 'Bruit / Notch', 'icmp.autoNotch': 'Filtre notch auto', 'icmp.apf': 'Filtre de pic audio (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Molette ou ± pour décaler · Ctrl+←/→ décale le RIT si actif', 'icmp.bandsAntenna': 'Bandes & Antenne', 'icmp.bandCurrent': 'Le poste est sur {b} m', 'icmp.antenna': 'Antenne', 'icmp.passband': 'Passe-bande / Notch', 'icmp.pbtCenter': 'Centrer PBT', 'icmp.manualNotch': 'Notch manuel — active MN, puis règle la position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Allumer la radio (démarre en ~15 s)', 'icmp.powerOffHint': 'Éteindre la radio', 'icmp.powerOffConfirm': 'Éteindre la radio ?',
|
||||
'rst.clickToFill': 'Clic pour remplir le RST tx depuis le signal',
|
||||
|
||||
Reference in New Issue
Block a user