feat: control the 4O3A Tuner Genius XL directly over TCP (port 9010)
New internal/tunergenius client speaking the same "Genius Series" text API as the Antenna Genius / PowerGenius XL: banner on connect (with optional "AUTH" for remote access), "C<seq>|<cmd>\n" commands, "R<seq>|<code>|<msg>" replies and the "S<seq>|status k=v …" snapshot; async "M|<msg>" info lines are consumed inline. Polls status ~1.5s and exposes SWR (return-loss dB converted to a VSWR ratio), forward power (dBm→W), and the operate/bypass/ tuning/active-channel state. Actions: autotune, global bypass, operate/standby. Controlled directly (not via the radio) so OpsLog uses only one of the box's four connection slots, per the device's protocol doc. Wiring: - app.go: tunergenius.* settings keys, Get/Save/start, GetTunerGeniusStatus, TunerGeniusAutotune/SetBypass/SetOperate; started in the background at launch. - Settings → Tuner Genius panel (enable + IP + optional remote code). - Docked TunerGeniusPanel widget (SWR/power readouts + Tune/Bypass/Operate), top-bar toggle, shown when enabled — mirrors the Antenna Genius widget. - i18n EN/FR (sec.tunergenius, tg2.*, tgp.*). Command verbs (operate/bypass/autotune/status/auth) come straight from the 4O3A "Tuner Genius XL — Protocol Description"; UNTESTED on hardware.
This commit is contained in:
@@ -139,7 +139,7 @@ const en: Dict = {
|
||||
'uscty.backfillDone': '{s} US QSOs scanned · {c} counties, {g} grids filled.',
|
||||
'station.title': 'Station Control', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'No heading read', 'station.pattern': 'Pattern', 'station.bi': 'Bi', 'station.retract': 'Retract elements', 'station.moving': 'MOVING', 'station.elements': 'Elements (mm)', 'station.read': 'Read', 'station.readLengths': 'Read current element lengths from the controller', 'station.noLengths': 'Lengths unknown — click Read to fetch them from the controller.', 'station.element': 'Element', 'station.reflector': 'Reflector', 'station.driven': 'Driven', 'station.director': 'Dir', 'station.set': 'Set', 'station.elementsHint': 'Each press lengthens/shortens the element by 2 mm (like the physical console). Verify which element responds on your antenna.', 'station.setExactLen': 'Click to type the exact current length (fixes the baseline if the auto-read is off).', 'station.atMax': 'Controller refused — the element is likely at its maximum length for this band, so it can\'t extend further.', 'station.go': 'Go', 'station.stop': 'Stop', 'station.dragHint': 'Drag the grip handle on the left of a panel to move it. Pick a column count to lay them out in a grid.', 'station.dragMove': 'Drag to move this panel', 'station.colsAuto': 'Auto', 'station.addDevice': 'Add device', 'station.editDevice': 'Edit device', 'station.empty': 'No relay boards yet. Add a WebSwitch 1216H or a KMTronic 8-relay board to control your station power and accessories.', 'station.online': 'Online', 'station.offline': 'Offline', 'station.edit': 'Edit', 'station.delete': 'Delete', 'station.relay': 'Relay', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': 'Device type', 'station.name': 'Name', 'station.host': 'Host / IP', 'station.user': 'Username', 'station.pass': 'Password', 'station.optional': 'optional', 'station.ftdiSerial': 'FTDI serial number', 'station.detect': 'Detect', 'station.ftdiHint': 'The Denkovi board is driven via FTDI bit-bang (not the COM port). Pick its serial (e.g. DAE0006K). Needs the FTDI D2XX driver installed.', 'station.channels': 'Relays', 'station.comPort': 'COM port', 'station.noPorts': 'No ports found', 'station.usbRelayHint': 'Cheap USB-serial relay boards (CH340/LCUS) using the A0 command protocol. If yours does not switch, tell me its model / command set.', 'station.labels': 'Relay labels', 'station.cancel': 'Cancel', 'station.save': 'Save', 'station.test': 'Test connection', 'station.testOk': 'Connected — {n} relays', 'station.testFail': 'Not connected', 'station.detectNone': 'No FTDI board found — check the cable and that the D2XX driver is installed.', 'station.detectFound': '{n} board(s) detected.',
|
||||
'sec.awards': 'Awards', 'sec.cat': 'CAT interface', 'sec.rotator': 'Rotator', 'sec.winkeyer': 'CW Keyer',
|
||||
'sec.antenna': 'Ultrabeam / Steppir', 'sec.antgenius': 'Antenna Genius', 'sec.pgxl': 'Amplifier', 'sec.flex': 'FlexRadio', 'sec.audio': 'Audio devices',
|
||||
'sec.antenna': 'Ultrabeam / Steppir', 'sec.antgenius': 'Antenna Genius', 'sec.tunergenius': 'Tuner Genius', 'sec.pgxl': 'Amplifier', 'sec.flex': 'FlexRadio', 'sec.audio': 'Audio devices',
|
||||
// CW Keyer settings panel
|
||||
'wk.enable': 'Enable CW keyer (shows the keyer panel)', 'wk.engine': 'Keyer engine',
|
||||
'wk.escClears': 'ESC clears the callsign too (otherwise ESC only stops transmission)',
|
||||
@@ -252,6 +252,7 @@ const en: Dict = {
|
||||
'autostart.hint': 'Launch external programs (WSJT-X, JTAlert, rotator control…) when OpsLog starts. A program already running is not started again. Saved per profile.',
|
||||
'cat.hint': "Reads the rig's frequency / band / mode and pushes them into the entry strip in real time. Use OmniRig (free, any rig) or — for FlexRadio — the native SmartSDR API (no OmniRig needed, real-time, no second-click mode bug).",
|
||||
'ag2.hint': 'OpsLog talks to the 4O3A Antenna Genius switch over TCP (GSCP protocol). The port is fixed at 9007, so only the device IP is needed. A docked widget then lets you switch antennas per port (A/B).', 'ag2.password': 'Remote password', 'ag2.passwordPh': 'blank on LAN', 'ag2.passwordHint': 'Only needed when reaching the device remotely — it then announces "AG AUTH" and rejects commands until you log in. Leave blank on the local network.',
|
||||
'tg2.hint': 'OpsLog talks to the 4O3A Tuner Genius XL over TCP (port fixed at 9010), so only the device IP is needed. A docked widget then shows SWR and forward power and offers Tune, Bypass and Operate/Standby. Control it directly (not through the radio) so OpsLog uses just one of the box\'s connection slots.', 'tg2.enable': 'Enable Tuner Genius control', 'tg2.portHint': 'The TCP port is fixed at 9010 on the device.', 'tg2.password': 'Remote code', 'tg2.passwordPh': 'blank on LAN', 'tg2.passwordHint': 'Only needed when reaching the device remotely — it then announces "AUTH" and rejects commands until you log in. Leave blank on the local network.',
|
||||
'rot.enable': 'Enable rotator control', 'rot.testOkRG': 'Connected — the Rotator Genius accepted the command (moving to 0°).', 'rot.type': 'Rotator type', 'rot.rotatorNum': 'Rotator #', 'rot.rgHint': 'Talks directly to a 4O3A Rotator Genius over TCP (default port 9006) — no PstRotator needed. Rotator # selects which of the two rotators to drive.', 'rot.arcoHint': "Talks directly to a microHAM ARCO — no PstRotator needed. LAN: set Config → LAN → CONTROL PROTOCOL to 'Yaesu GS-232A' on the ARCO and enter the same TCP port here (up to 4 parallel connections). USB: set USB CONTROL PROTOCOL to 'Yaesu GS-232A' and pick the ARCO's COM port here (baud rate doesn't matter on USB).", 'rot.hint': "OpsLog sends UDP commands to PstRotator. Enable PstRotator's UDP listener (Setup → Communication → UDP) before testing.",
|
||||
'extsvc.hint': 'Upload logged QSOs to online logbooks. Each service uploads automatically on a new QSO when enabled; timing is per-service (immediate, or a 1–2 min delay so a mis-logged QSO can still be fixed first).',
|
||||
'hw.motorTxInhibit': 'Inhibit transmission while the antenna is moving', 'hw.motorTxInhibitHint': 'Blocks the FlexRadio from transmitting while the elements move (needs FlexRadio in API mode + this antenna enabled). No effect with other radios.', 'hw.motorAntenna': 'Ultrabeam / Steppir', 'hw.motorEnable': 'Enable antenna control', 'hw.motorType': 'Antenna type', 'hw.motorTransport': 'Connection', 'hw.motorTcp': 'Network (TCP)', 'hw.motorSerial': 'Serial (COM)', 'hw.motorCom': 'Serial port', 'hw.motorBaud': 'Baud', 'hw.steppirHint': 'SteppIR controllers are RS-232 serial (the DATA OUT DB9 port). Serial = a USB↔RS-232 (FTDI) adapter, shown as a COM port. Network = a serial-to-Ethernet bridge (as for the Ultrabeam).', 'hw.steppirRange': 'Tunable range', 'hw.steppirRangeHint': "The SteppIR's frequency coverage. On a band outside this range (e.g. 30 m on a 20 m–6 m SteppIR) OpsLog won't try to tune the antenna and won't inhibit transmission. Default 13–54 MHz (20 m–6 m); widen the low edge (e.g. 6) for a 40 m-equipped SteppIR.", 'hw.ultrabeam': 'Antenna (Ultrabeam)', 'hw.audioVoice': 'Audio devices & voice keyer',
|
||||
@@ -331,6 +332,7 @@ const en: Dict = {
|
||||
'wkp.autoCallHint': 'Click a CQ macro (one whose text contains CQ) to resend it on a loop — message, gap, repeat — until you send another macro (e.g. a report), press Stop, or hit ESC. Non-CQ macros send once.', 'wkp.autoCall': 'Auto-call', 'wkp.gap': 'gap', 'wkp.gapHint': 'Seconds to wait after the message before resending', 'wkp.loopHint': 'click a CQ macro to loop it', 'wkp.macroN': 'Macro {n}',
|
||||
'dvkp.voiceKeyer': 'Voice keyer', 'dvkp.autoCq': 'Auto CQ', 'dvkp.autoCqHint': 'Repeat a CQ-labelled message on a timer until you stop it or play another slot', 'dvkp.gap': 'Gap', 'dvkp.notPhone': 'The voice keyer only transmits on a phone mode (SSB/AM/FM)', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Disable voice keyer', 'dvkp.noMsgPre': 'No messages recorded yet. Open', 'dvkp.settingsPath': 'Settings → Audio devices & voice keyer', 'dvkp.noMsgPost': 'to record F1–F6.', 'dvkp.transmit': 'Transmit F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — empty', 'dvkp.message': 'message',
|
||||
'agp.portDeselect': 'Port {letter} — click to deselect', 'agp.portSelect': 'Select on port {letter}', 'agp.online': 'online', 'agp.offline': 'offline', 'agp.close': 'Close', 'agp.connecting': 'Connecting…', 'agp.noAntennas': 'No antennas configured.', 'agp.filterOnHint': 'Showing antennas for {band} only — click to show all bands', 'agp.filterOffHint': 'Showing all antennas — click to show only the current band',
|
||||
'tgp.online': 'online', 'tgp.offline': 'offline', 'tgp.close': 'Close', 'tgp.connecting': 'Connecting…', 'tgp.swr': 'SWR', 'tgp.power': 'Fwd power', 'tgp.tune': 'Tune', 'tgp.tuning': 'Tuning…', 'tgp.tuneHint': 'Start an automatic tuning cycle on the active channel — key the rig into a carrier so the tuner can measure SWR', 'tgp.bypass': 'Bypass', 'tgp.bypassHint': 'Toggle global bypass — route the antenna straight through, tuner out of line', 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Toggle Operate / Standby',
|
||||
'flxp.ritHint': 'RIT — shifts your RECEIVE frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.', 'flxp.xitHint': 'XIT — shifts your TRANSMIT frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.',
|
||||
'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
|
||||
'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER', 'flxp.outputPower': 'OUTPUT POWER', 'flxp.speOffline': 'SPE offline', 'flxp.acomOffline': 'ACOM offline', 'flxp.ampPick': 'Choose which amplifier this card shows', 'flxp.dspV4Hint': 'SmartSDR v4 DSP (8000/Aurora series)', 'flxp.daxHint': 'DAX as the transmit audio source (SmartSDR transmit-bar DAX button) — for WSJT-X & co', 'flxp.rnnHint': 'RNN — AI noise reduction (on/off)', 'flxp.anftHint': 'ANFT — FFT-based automatic notch filter (on/off)', 'flxp.dspNoise': 'Noise', 'flxp.dspMore': 'Show/hide advanced DSP (WNB, v4 NR/notch)',
|
||||
@@ -510,7 +512,7 @@ const fr: Dict = {
|
||||
'uscty.backfillDone': '{s} QSO US analysés · {c} comtés, {g} locators remplis.',
|
||||
'station.title': 'Contrôle station', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'Azimut non lu', 'station.pattern': 'Diagramme', 'station.bi': 'Bi', 'station.retract': 'Rétracter les éléments', 'station.moving': 'EN MOUVEMENT', 'station.elements': 'Éléments (mm)', 'station.read': 'Lire', 'station.readLengths': 'Lire les longueurs actuelles depuis le contrôleur', 'station.noLengths': 'Longueurs inconnues — clique sur Lire pour les récupérer depuis le contrôleur.', 'station.element': 'Élément', 'station.reflector': 'Réflecteur', 'station.driven': 'Radiateur', 'station.director': 'Dir', 'station.set': 'Régler', 'station.elementsHint': "Chaque appui allonge/raccourcit l'élément de 2 mm (comme le pupitre). Vérifie quel élément répond sur ton antenne.", 'station.setExactLen': "Clique pour taper la longueur actuelle exacte (recale la base si la lecture auto est fausse).", 'station.atMax': "Refusé par le contrôleur — l'élément est probablement en butée (longueur max pour cette bande), il ne peut plus s'allonger.", 'station.go': 'Aller', 'station.stop': 'Stop', 'station.dragHint': 'Glisse la poignée à gauche d un panneau pour le déplacer. Choisis un nombre de colonnes pour la disposition.', 'station.dragMove': 'Glisser pour déplacer ce panneau', 'station.colsAuto': 'Auto', 'station.addDevice': 'Ajouter un appareil', 'station.editDevice': "Modifier l'appareil", 'station.empty': "Aucune carte relais. Ajoute un WebSwitch 1216H ou une carte KMTronic 8 relais pour piloter l'alimentation et les accessoires de ta station.", 'station.online': 'En ligne', 'station.offline': 'Hors ligne', 'station.edit': 'Modifier', 'station.delete': 'Supprimer', 'station.relay': 'Relais', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': "Type d'appareil", 'station.name': 'Nom', 'station.host': 'Hôte / IP', 'station.user': "Nom d'utilisateur", 'station.pass': 'Mot de passe', 'station.optional': 'optionnel', 'station.ftdiSerial': 'Numéro de série FTDI', 'station.detect': 'Détecter', 'station.ftdiHint': "La carte Denkovi se pilote en FTDI bit-bang (pas via le port COM). Choisis son numéro de série (ex. DAE0006K). Nécessite le driver FTDI D2XX installé.", 'station.channels': 'Relais', 'station.comPort': 'Port COM', 'station.noPorts': 'Aucun port', 'station.usbRelayHint': "Cartes USB-série bon marché (CH340/LCUS) protocole A0. Si la tienne ne commute pas, donne-moi le modèle / jeu de commandes.", 'station.labels': 'Libellés des relais', 'station.cancel': 'Annuler', 'station.save': 'Enregistrer', 'station.test': 'Tester la connexion', 'station.testOk': 'Connecté — {n} relais', 'station.testFail': 'Non connecté', 'station.detectNone': 'Aucune carte FTDI trouvée — vérifie le câble et que le driver D2XX est installé.', 'station.detectFound': '{n} carte(s) détectée(s).',
|
||||
'sec.awards': 'Diplômes', 'sec.cat': 'Interface CAT', 'sec.rotator': 'Rotator', 'sec.winkeyer': 'Manipulateur CW',
|
||||
'sec.antenna': 'Antenne motorisée', 'sec.antgenius': 'Antenna Genius', 'sec.pgxl': 'Amplificateur', 'sec.flex': 'FlexRadio', 'sec.audio': 'Périphériques audio',
|
||||
'sec.antenna': 'Antenne motorisée', 'sec.antgenius': 'Antenna Genius', 'sec.tunergenius': 'Tuner Genius', 'sec.pgxl': 'Amplificateur', 'sec.flex': 'FlexRadio', 'sec.audio': 'Périphériques audio',
|
||||
// Panneau Manipulateur CW
|
||||
'wk.enable': 'Activer le manipulateur CW (affiche le panneau)', 'wk.engine': 'Moteur du manipulateur',
|
||||
'wk.escClears': "ÉCHAP efface aussi l'indicatif (sinon ÉCHAP arrête seulement la transmission)",
|
||||
@@ -614,6 +616,7 @@ const fr: Dict = {
|
||||
'autostart.hint': "Lance des programmes externes (WSJT-X, JTAlert, contrôle rotator…) au démarrage d'OpsLog. Un programme déjà lancé n'est pas relancé. Enregistré par profil.",
|
||||
'cat.hint': "Lit la fréquence / bande / mode du poste et les injecte dans le bandeau de saisie en temps réel. Utilise OmniRig (gratuit, tout poste) ou — pour FlexRadio — l'API native SmartSDR (sans OmniRig, temps réel, sans le bug du mode au 2ᵉ clic).",
|
||||
'ag2.hint': "OpsLog dialogue avec le switch 4O3A Antenna Genius en TCP (protocole GSCP). Le port est fixé à 9007, seule l'IP de l'appareil est nécessaire. Un widget ancré permet ensuite de commuter les antennes par port (A/B).", 'ag2.password': 'Mot de passe distant', 'ag2.passwordPh': 'vide en LAN', 'ag2.passwordHint': "Nécessaire seulement à distance — l'appareil annonce alors « AG AUTH » et refuse les commandes tant qu'on n'est pas identifié. Laisse vide sur le réseau local.",
|
||||
'tg2.hint': "OpsLog dialogue avec le 4O3A Tuner Genius XL en TCP (port fixé à 9010), seule l'IP de l'appareil est nécessaire. Un widget ancré affiche le ROS et la puissance directe et propose Accord, Bypass et Operate/Standby. Pilotage direct (pas via la radio) pour n'utiliser qu'une des connexions de la boîte.", 'tg2.enable': "Activer le contrôle du Tuner Genius", 'tg2.portHint': "Le port TCP est fixé à 9010 sur l'appareil.", 'tg2.password': 'Code distant', 'tg2.passwordPh': 'vide en LAN', 'tg2.passwordHint': "Nécessaire seulement à distance — l'appareil annonce alors « AUTH » et refuse les commandes tant qu'on n'est pas identifié. Laisse vide sur le réseau local.",
|
||||
'rot.enable': 'Activer le contrôle du rotator', 'rot.testOkRG': 'Connecté — le Rotator Genius a accepté la commande (rotation vers 0°).', 'rot.type': 'Type de rotator', 'rot.rotatorNum': 'Rotator n°', 'rot.rgHint': 'Parle directement à un Rotator Genius 4O3A en TCP (port 9006 par défaut) — sans PstRotator. Le n° choisit lequel des deux rotators du boîtier piloter.', 'rot.arcoHint': "Parle directement à un microHAM ARCO — sans PstRotator. Réseau : régler Config → LAN → CONTROL PROTOCOL sur « Yaesu GS-232A » sur l'ARCO et saisir ici le même port TCP (jusqu'à 4 connexions en parallèle). USB : régler USB CONTROL PROTOCOL sur « Yaesu GS-232A » et choisir ici le port COM de l'ARCO (la vitesse est sans importance en USB).", 'rot.hint': "OpsLog envoie des commandes UDP à PstRotator. Active l'écouteur UDP de PstRotator (Setup → Communication → UDP) avant de tester.",
|
||||
'extsvc.hint': "Envoie les QSO enregistrés vers des carnets en ligne. Chaque service upload automatiquement à chaque nouveau QSO si activé ; le délai est propre à chaque service (immédiat, ou 1–2 min pour corriger un QSO mal saisi avant).",
|
||||
'hw.motorTxInhibit': "Inhiber la transmission pendant que l'antenne bouge", 'hw.motorTxInhibitHint': "Empêche le FlexRadio d'émettre pendant que les éléments bougent (nécessite le FlexRadio en API + cette antenne activée). Sans effet avec les autres radios.", 'hw.motorAntenna': 'Antenne motorisée', 'hw.motorEnable': "Activer le contrôle de l'antenne", 'hw.motorType': "Type d'antenne", 'hw.motorTransport': 'Connexion', 'hw.motorTcp': 'Réseau (TCP)', 'hw.motorSerial': 'Série (COM)', 'hw.motorCom': 'Port série', 'hw.motorBaud': 'Débit', 'hw.steppirHint': "Les contrôleurs SteppIR sont en RS-232 série (port DB9 « DATA OUT »). Série = un adaptateur USB↔RS-232 (FTDI), vu comme un port COM. Réseau = un pont série-Ethernet (comme pour l'Ultrabeam).", 'hw.steppirRange': 'Plage accordable', 'hw.steppirRangeHint': "La couverture en fréquence de la SteppIR. Sur une bande hors de cette plage (p. ex. 30 m avec une SteppIR 20 m-6 m), OpsLog n'essaie pas d'accorder l'antenne et n'inhibe pas l'émission. Défaut 13-54 MHz (20 m-6 m) ; abaisse la borne basse (p. ex. 6) pour une SteppIR équipée 40 m.", 'hw.ultrabeam': 'Antenne (Ultrabeam)', 'hw.audioVoice': 'Périphériques audio & manipulateur vocal',
|
||||
@@ -686,6 +689,7 @@ const fr: Dict = {
|
||||
'wkp.autoCallHint': "Clique une macro CQ (dont le texte contient CQ) pour la réémettre en boucle — message, pause, répétition — jusqu'à envoyer une autre macro (ex. un report), appuyer sur Stop ou ESC. Les macros non-CQ ne sont émises qu'une fois.", 'wkp.autoCall': 'Appel auto', 'wkp.gap': 'pause', 'wkp.gapHint': 'Secondes à attendre après le message avant de réémettre', 'wkp.loopHint': 'clique une macro CQ pour la boucler', 'wkp.macroN': 'Macro {n}',
|
||||
'dvkp.voiceKeyer': 'Manipulateur vocal', 'dvkp.autoCq': 'Auto CQ', 'dvkp.autoCqHint': 'Répète un message libellé CQ à intervalle régulier jusqu\'à l\'arrêt ou la lecture d\'un autre slot', 'dvkp.gap': 'Intervalle', 'dvkp.notPhone': 'Le manipulateur vocal n\'émet qu\'en mode phonie (SSB/AM/FM)', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Désactiver le manipulateur vocal', 'dvkp.noMsgPre': 'Aucun message enregistré. Ouvre', 'dvkp.settingsPath': 'Réglages → Périphériques audio & manipulateur vocal', 'dvkp.noMsgPost': 'pour enregistrer F1–F6.', 'dvkp.transmit': 'Émettre F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — vide', 'dvkp.message': 'message',
|
||||
'agp.portDeselect': 'Port {letter} — clic pour désélectionner', 'agp.portSelect': 'Sélectionner sur le port {letter}', 'agp.online': 'en ligne', 'agp.offline': 'hors ligne', 'agp.close': 'Fermer', 'agp.connecting': 'Connexion…', 'agp.noAntennas': 'Aucune antenne configurée.', 'agp.filterOnHint': 'Antennes du {band} uniquement — clic pour afficher toutes les bandes', 'agp.filterOffHint': 'Toutes les antennes affichées — clic pour n’afficher que la bande courante',
|
||||
'tgp.online': 'en ligne', 'tgp.offline': 'hors ligne', 'tgp.close': 'Fermer', 'tgp.connecting': 'Connexion…', 'tgp.swr': 'ROS', 'tgp.power': 'Puiss. directe', 'tgp.tune': 'Accord', 'tgp.tuning': 'Accord…', 'tgp.tuneHint': "Lancer un cycle d'accord automatique sur le canal actif — passe la radio en porteuse pour que le coupleur mesure le ROS", 'tgp.bypass': 'Bypass', 'tgp.bypassHint': "Basculer le bypass global — antenne en direct, coupleur hors ligne", 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Basculer Operate / Standby',
|
||||
'flxp.ritHint': "RIT — décale uniquement ta fréquence de RÉCEPTION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.", 'flxp.xitHint': "XIT — décale uniquement ta fréquence d'ÉMISSION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.",
|
||||
'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
|
||||
'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR', 'flxp.outputPower': 'PUISSANCE DE SORTIE', 'flxp.speOffline': 'SPE hors ligne', 'flxp.acomOffline': 'ACOM hors ligne', 'flxp.ampPick': 'Choisir quel amplificateur cette carte affiche', 'flxp.dspV4Hint': 'DSP SmartSDR v4 (séries 8000/Aurora)', 'flxp.daxHint': "DAX comme source audio d'émission (bouton DAX du bandeau transmit de SmartSDR) — pour WSJT-X & co", 'flxp.rnnHint': 'RNN — réduction de bruit par IA (on/off)', 'flxp.anftHint': 'ANFT — filtre notch automatique FFT (on/off)', 'flxp.dspNoise': 'Bruit', 'flxp.dspMore': 'Afficher/masquer le DSP avancé (WNB, NR/notch v4)',
|
||||
|
||||
Reference in New Issue
Block a user