diff --git a/app.go b/app.go index e4ea5c8..ef300a1 100644 --- a/app.go +++ b/app.go @@ -126,6 +126,7 @@ const ( // backend's setting. keyCATYaesuLowLines = "cat.yaesu.low_dtr_rts" // deassert DTR/RTS on connect keyCATKenwoodLowLines = "cat.kenwood.low_dtr_rts" // deassert DTR/RTS on connect + keyCATKenwoodDataMode = "cat.kenwood.data_mode" // data modes → "usb" | "data" (MD6) | "keep" keyCATIcomPort = "cat.icom.port" // Icom USB CI-V serial port (e.g. COM5) keyCATIcomBaud = "cat.icom.baud" // Icom CI-V baud (default 115200) keyCATIcomAddr = "cat.icom.addr" // Icom CI-V address, decimal (IC-7610 = 152 / 0x98) @@ -403,6 +404,10 @@ type CATSettings struct { // adapter). NOT the radio’s own RJ45, which speaks Kenwood’s KNS/ARCP. KenwoodPort string `json:"kenwood_port"` // Kenwood CAT serial port (TS-590/890/2000, Elecraft) KenwoodBaud int `json:"kenwood_baud"` // Kenwood CAT baud (TS-590 default 9600) + // What a DATA/digital mode (FT8, PSK…) sets on the rig: "usb" (default), "data" + // (MD6 — Elecraft K3/K4 DATA mode) or "keep" (leave the rig's mode untouched, + // for a TS-590SG/TS-990S whose data mode is a USB modifier set on the rig). + KenwoodDataMode string `json:"kenwood_data_mode"` // Per-backend: deassert DTR and RTS after opening the CAT port, for // interfaces that read either line as PTT. Off by default: lowering them // stops some USB-serial interfaces transmitting at all. @@ -6855,7 +6860,7 @@ func (a *App) GetCATSettings() (CATSettings, error) { if a.settings == nil { return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized") } - m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPttHotkeyEnabled, keyCATPttHotkey, keyCATPttHotkeyToggle, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort) + m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATKenwoodDataMode, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPttHotkeyEnabled, keyCATPttHotkey, keyCATPttHotkeyToggle, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort) if err != nil { return CATSettings{}, err } @@ -6878,6 +6883,7 @@ func (a *App) GetCATSettings() (CATSettings, error) { KenwoodBaud: 9600, YaesuLowLines: m[keyCATYaesuLowLines] == "1", KenwoodLowLines: m[keyCATKenwoodLowLines] == "1", + KenwoodDataMode: m[keyCATKenwoodDataMode], IcomPort: m[keyCATIcomPort], IcomBaud: 115200, IcomAddr: 0x98, // IC-7610 default @@ -7047,6 +7053,7 @@ func (a *App) SaveCATSettings(s CATSettings) error { keyCATKenwoodBaud: strconv.Itoa(s.KenwoodBaud), keyCATYaesuLowLines: b01(s.YaesuLowLines), keyCATKenwoodLowLines: b01(s.KenwoodLowLines), + keyCATKenwoodDataMode: strings.ToLower(strings.TrimSpace(s.KenwoodDataMode)), keyCATIcomPort: strings.TrimSpace(s.IcomPort), keyCATIcomBaud: strconv.Itoa(s.IcomBaud), keyCATIcomAddr: strconv.Itoa(s.IcomAddr), @@ -12965,10 +12972,13 @@ func (a *App) reloadCAT() { // more deliberate setting, and silently preferring the wire would leave an // operator staring at a host they typed and a radio that never answers. if h := strings.TrimSpace(s.KenwoodHost); h != "" { - a.cat.Start(cat.NewKenwoodTCP(h, s.DigitalDefault)) + kw := cat.NewKenwoodTCP(h, s.DigitalDefault) + kw.SetDataMode(s.KenwoodDataMode) + a.cat.Start(kw) } else { kw := cat.NewKenwood(s.KenwoodPort, s.KenwoodBaud, s.DigitalDefault) kw.SetLowerLines(s.KenwoodLowLines) + kw.SetDataMode(s.KenwoodDataMode) a.cat.Start(kw) } case "icom": diff --git a/changelog.json b/changelog.json index 601876e..897a331 100644 --- a/changelog.json +++ b/changelog.json @@ -3,10 +3,12 @@ "version": "0.23.4", "date": "", "en": [ - "CW keyer (Kenwood/Elecraft): choosing the Kenwood/Elecraft engine now actually switches to it. A bug left the keyer on WinKeyer even though the setting showed Kenwood/Elecraft, so its CW-over-CAT never ran." + "CW keyer (Kenwood/Elecraft): choosing the Kenwood/Elecraft engine now actually switches to it. A bug left the keyer on WinKeyer even though the setting showed Kenwood/Elecraft, so its CW-over-CAT never ran.", + "Kenwood/Elecraft data mode: a new setting (Settings → CAT) chooses what a data mode (FT8/PSK…) sets on the rig — USB (default), DATA mode (MD6, for an Elecraft K3/K4), or leave the rig's mode unchanged (safest for a TS-590SG/TS-990S, whose data mode is a USB modifier set on the radio). There is no single command that fits every rig, so it's now the operator's choice." ], "fr": [ - "Keyer CW (Kenwood/Elecraft) : choisir le moteur Kenwood/Elecraft y bascule désormais réellement. Un bug laissait le keyer sur WinKeyer alors que le réglage affichait Kenwood/Elecraft, son CW-sur-CAT ne démarrait donc jamais." + "Keyer CW (Kenwood/Elecraft) : choisir le moteur Kenwood/Elecraft y bascule désormais réellement. Un bug laissait le keyer sur WinKeyer alors que le réglage affichait Kenwood/Elecraft, son CW-sur-CAT ne démarrait donc jamais.", + "Mode data Kenwood/Elecraft : un nouveau réglage (Réglages → CAT) choisit ce qu'un mode data (FT8/PSK…) règle sur la radio — USB (défaut), mode DATA (MD6, pour un Elecraft K3/K4), ou ne pas changer le mode de la radio (le plus sûr pour un TS-590SG/TS-990S dont le mode data est un modificateur d'USB réglé sur la radio). Aucune commande unique ne convient à toutes les radios, c'est donc désormais au choix de l'opérateur." ] }, { diff --git a/frontend/src/components/SettingsModal.tsx b/frontend/src/components/SettingsModal.tsx index 70fa4f1..b0c8b65 100644 --- a/frontend/src/components/SettingsModal.tsx +++ b/frontend/src/components/SettingsModal.tsx @@ -1136,7 +1136,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan const [modeDraft, setModeDraft] = useState(''); const [catCfg, setCatCfg] = useState({ enabled: false, backend: 'omnirig', omnirig_rig: 1, omnirig_vfo: '', flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120, - yaesu_port: '', yaesu_baud: 38400, yaesu_low_lines: false, kenwood_low_lines: false, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '', + yaesu_port: '', yaesu_baud: 38400, yaesu_low_lines: false, kenwood_low_lines: false, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', kenwood_data_mode: 'usb', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '', icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false, tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0, digital_default: 'FT8', share_enabled: false, share_port: 4532, @@ -2642,6 +2642,18 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan {t('cat.lowerLinesHint')} +
+ + + {t('cat.kwDataHint')} +
)} {catCfg.backend === 'icom' && ( diff --git a/frontend/src/lib/i18n.tsx b/frontend/src/lib/i18n.tsx index 7e68152..36c5192 100644 --- a/frontend/src/lib/i18n.tsx +++ b/frontend/src/lib/i18n.tsx @@ -277,7 +277,7 @@ const en: Dict = { 'extsvc.hint': 'Upload logged QSOs to online logbooks. Each service uploads automatically on a new QSO when enabled; timing is per-service (immediate, or a 1–2 min delay so a mis-logged QSO can still be fixed first).', 'hw.motorTxInhibit': 'Inhibit transmission while the antenna is moving', 'hw.motorTxInhibitHint': 'Blocks the FlexRadio from transmitting while the elements move (needs FlexRadio in API mode + this antenna enabled). No effect with other radios.', 'hw.motorAntenna': 'Ultrabeam / Steppir', 'hw.motorEnable': 'Enable antenna control', 'hw.motorType': 'Antenna type', 'hw.motorTransport': 'Connection', 'hw.motorTcp': 'Network (TCP)', 'hw.motorSerial': 'Serial (COM)', 'hw.motorCom': 'Serial port', 'hw.motorBaud': 'Baud', 'hw.steppirHint': 'SteppIR controllers are RS-232 serial (the DATA OUT DB9 port). Serial = a USB↔RS-232 (FTDI) adapter, shown as a COM port. Network = a serial-to-Ethernet bridge (as for the Ultrabeam).', 'hw.steppirRange': 'Tunable range', 'hw.steppirRangeHint': "The SteppIR's frequency coverage. On a band outside this range (e.g. 30 m on a 20 m–6 m SteppIR) OpsLog won't try to tune the antenna and won't inhibit transmission. Default 13–54 MHz (20 m–6 m); widen the low edge (e.g. 6) for a 40 m-equipped SteppIR.", 'hw.ultrabeam': 'Antenna (Ultrabeam)', 'hw.audioVoice': 'Audio devices & voice keyer', // CAT panel body - 'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'A native CAT backend owns the radio serial port, so no other program can reach it. This lets WSJT-X, JTDX, MSHV or Log4OM talk to the rig THROUGH OpsLog: in the other program pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532. Works with every backend, not only the native ones.', 'cat.sharePort': 'Sharing port', 'cat.pttKey': 'Enable PTT hotkey', 'cat.pttKeyPress': 'Press a key…', 'cat.pttKeyNone': 'Click to set a key', 'cat.pttKeyClear': 'Clear', 'cat.pttKeyToggle': 'Toggle mode (press to key, press again to unkey)', 'cat.pttKeyHint': 'While OpsLog is focused, this key keys the transmitter — held down by default (release to stop), or latched in toggle mode. It uses the Audio → PTT method (CAT / RTS / DTR), falling back to CAT keying. Pick a key you never type while logging (e.g. Pause, ScrollLock, or a footswitch mapped to one) — OpsLog swallows it so it never lands in a field.', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.xieguPTTLine': 'How the rig is keyed', 'cat.xieguPTTCiv': 'CI-V command', 'cat.xieguPTTHint': 'A G90 does not transmit on the CI-V command: interfaces like the DE-19 key it on RTS or DTR. Pick the line yours uses \u2014 it is also what lets WSJT-X transmit through the shared CAT link.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.kenwoodHostHint': 'A serial-over-network bridge \u2014 ser2net, an Ethernet-serial adapter, a Raspberry Pi at the radio. Filled in, it is used INSTEAD of the COM port above. This is not the radio\u2019s own RJ45 socket, which speaks Kenwood\u2019s KNS protocol and is not supported.', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.lowerLines': 'Lower the DTR and RTS lines on connect', 'cat.lowerLinesHint': 'Windows raises both when the port opens, and some interfaces read either line as PTT — the radio then transmits for as long as OpsLog runs. Tick this only if that happens: other interfaces need RTS raised to transmit at all, and lowering it makes the rig go silent.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved', + 'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'A native CAT backend owns the radio serial port, so no other program can reach it. This lets WSJT-X, JTDX, MSHV or Log4OM talk to the rig THROUGH OpsLog: in the other program pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532. Works with every backend, not only the native ones.', 'cat.sharePort': 'Sharing port', 'cat.pttKey': 'Enable PTT hotkey', 'cat.pttKeyPress': 'Press a key…', 'cat.pttKeyNone': 'Click to set a key', 'cat.pttKeyClear': 'Clear', 'cat.pttKeyToggle': 'Toggle mode (press to key, press again to unkey)', 'cat.pttKeyHint': 'While OpsLog is focused, this key keys the transmitter — held down by default (release to stop), or latched in toggle mode. It uses the Audio → PTT method (CAT / RTS / DTR), falling back to CAT keying. Pick a key you never type while logging (e.g. Pause, ScrollLock, or a footswitch mapped to one) — OpsLog swallows it so it never lands in a field.', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.xieguPTTLine': 'How the rig is keyed', 'cat.xieguPTTCiv': 'CI-V command', 'cat.xieguPTTHint': 'A G90 does not transmit on the CI-V command: interfaces like the DE-19 key it on RTS or DTR. Pick the line yours uses \u2014 it is also what lets WSJT-X transmit through the shared CAT link.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.kenwoodHostHint': 'A serial-over-network bridge \u2014 ser2net, an Ethernet-serial adapter, a Raspberry Pi at the radio. Filled in, it is used INSTEAD of the COM port above. This is not the radio\u2019s own RJ45 socket, which speaks Kenwood\u2019s KNS protocol and is not supported.', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.lowerLines': 'Lower the DTR and RTS lines on connect', 'cat.lowerLinesHint': 'Windows raises both when the port opens, and some interfaces read either line as PTT — the radio then transmits for as long as OpsLog runs. Tick this only if that happens: other interfaces need RTS raised to transmit at all, and lowering it makes the rig go silent.', 'cat.kwDataMode': 'Data modes (FT8/PSK…) use', 'cat.kwDataUsb': 'USB', 'cat.kwDataMd6': 'DATA mode — MD6 (Elecraft K3/K4)', 'cat.kwDataKeep': 'Leave the rig’s mode unchanged', 'cat.kwDataHint': 'What OpsLog sets on the rig for a data mode. No single command fits every rig: an Elecraft K3/K4 wants DATA (MD6); a TS-590SG/TS-990S data mode is a USB modifier set on the rig, so pick USB or, safest, "Leave unchanged" and switch the rig to DATA yourself. On MD6 a plain Kenwood (TS-590/990) would land on FSK/RTTY — do not use it there.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved', 'cat.icomNetHost': 'Rig IP / hostname', 'cat.icomNetUser': 'Network user (ID)', 'cat.icomNetPass': 'Network password', 'cat.icomNetHint': "Connects to the rig's built-in LAN server directly — no RS-BA1 or Remote Utility needed (close them first). Use the Network User1 ID/Password set in the rig's Network menu. A rig in standby is powered on automatically.", 'cat.icomNetAudio': 'Stream RX audio over the network (experimental)', @@ -684,7 +684,7 @@ const fr: Dict = { 'rot.enable': 'Activer le contrôle du rotator', 'rot.testOkRG': 'Connecté — le Rotator Genius a accepté la commande (rotation vers 0°).', 'rot.type': 'Type de rotator', 'rot.rotatorNum': 'Rotator n°', 'rot.dual': 'Deux rotors', 'rot.rotor1': 'Rotor 1', 'rot.rotor2': 'Rotor 2', 'rot.name': 'Nom', 'rot.antenna': 'Antenne', 'rot.antenna1': 'Antenne rotor 1', 'rot.antenna2': 'Antenne rotor 2', 'rot.name1': 'Nom du rotor 1', 'rot.name2': 'Nom du rotor 2', 'rot.antStd': 'Antenne standard', 'rot.antMotor': 'Motorisée (Ultrabeam/SteppIR)', 'rot.add': 'Ajouter un rotor', 'rot.remove': 'Supprimer le rotor', 'rot.none': 'Aucun rotor configuré. Cliquez sur « Ajouter un rotor ».', 'rot.rgDual': 'Ce Rotator Genius pilote deux rotors (en ajoute un second)', 'rot.testRotor1': 'Tester rotor 1', 'rot.testRotor2': 'Tester rotor 2', 'rot.dualHint': 'Deux rotors indépendants de n\'importe quel type — par exemple un ARCO et un Rotator Genius côte à côte. Configurez chacun ci-dessous ; OpsLog affiche un sélecteur Rotor 1/2 sur le compas pour choisir celui qu\'il tourne et affiche. Réglez chaque rotor sur « Motorisée » pour que les tracés de boom/diagramme (inverse, bidirectionnel) n\'apparaissent que pour celui qui porte l\'Ultrabeam/SteppIR. (Pour un seul Rotator Genius pilotant deux rotors, réglez les deux sur Rotator Genius avec le même hôte et le rotator n° 1 et 2.)', 'rot.rgHint': 'Parle directement à un Rotator Genius 4O3A en TCP (port 9006 par défaut) — sans PstRotator. Le n° choisit lequel des deux rotators du boîtier piloter.', 'rot.arcoHint': "Parle directement à tout contrôleur réglé sur Yaesu GS-232A — sans PstRotator. microHAM ARCO : régler Config → LAN → CONTROL PROTOCOL (ou USB CONTROL PROTOCOL) sur « Yaesu GS-232A » ; en USB la vitesse est sans importance. ERC (Easy Rotor Control, ERC Mini compris) : son émulation DOIT être réglée sur GS-232 — un ERC laissé en Hy-Gain DCU-1 parle un autre jeu de commandes et ne répondra pas — puis choisir son port COM et la même vitesse que dans la configuration de l'ERC.", 'rot.hint': "OpsLog envoie des commandes UDP à PstRotator. Active l'écouteur UDP de PstRotator (Setup → Communication → UDP) avant de tester.", 'extsvc.hint': "Envoie les QSO enregistrés vers des carnets en ligne. Chaque service upload automatiquement à chaque nouveau QSO si activé ; le délai est propre à chaque service (immédiat, ou 1–2 min pour corriger un QSO mal saisi avant).", 'hw.motorTxInhibit': "Inhiber la transmission pendant que l'antenne bouge", 'hw.motorTxInhibitHint': "Empêche le FlexRadio d'émettre pendant que les éléments bougent (nécessite le FlexRadio en API + cette antenne activée). Sans effet avec les autres radios.", 'hw.motorAntenna': 'Antenne motorisée', 'hw.motorEnable': "Activer le contrôle de l'antenne", 'hw.motorType': "Type d'antenne", 'hw.motorTransport': 'Connexion', 'hw.motorTcp': 'Réseau (TCP)', 'hw.motorSerial': 'Série (COM)', 'hw.motorCom': 'Port série', 'hw.motorBaud': 'Débit', 'hw.steppirHint': "Les contrôleurs SteppIR sont en RS-232 série (port DB9 « DATA OUT »). Série = un adaptateur USB↔RS-232 (FTDI), vu comme un port COM. Réseau = un pont série-Ethernet (comme pour l'Ultrabeam).", 'hw.steppirRange': 'Plage accordable', 'hw.steppirRangeHint': "La couverture en fréquence de la SteppIR. Sur une bande hors de cette plage (p. ex. 30 m avec une SteppIR 20 m-6 m), OpsLog n'essaie pas d'accorder l'antenne et n'inhibe pas l'émission. Défaut 13-54 MHz (20 m-6 m) ; abaisse la borne basse (p. ex. 6) pour une SteppIR équipée 40 m.", 'hw.ultrabeam': 'Antenne (Ultrabeam)', 'hw.audioVoice': 'Périphériques audio & manipulateur vocal', - 'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un backend CAT natif occupe le port série de la radio, aucun autre logiciel ne peut donc y accéder. Ceci permet à WSJT-X, JTDX, MSHV ou Log4OM de dialoguer avec la radio À TRAVERS OpsLog : dans l'autre logiciel, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532. Fonctionne avec tous les backends, pas seulement les natifs.", 'cat.sharePort': 'Port de partage', 'cat.pttKey': 'Activer la touche PTT', 'cat.pttKeyPress': 'Appuyez sur une touche…', 'cat.pttKeyNone': 'Cliquez pour définir une touche', 'cat.pttKeyClear': 'Effacer', 'cat.pttKeyToggle': 'Mode bascule (appui = émission, nouvel appui = arrêt)', 'cat.pttKeyHint': "Quand OpsLog a le focus, cette touche passe la radio en émission — maintenue par défaut (relâcher pour arrêter), ou verrouillée en mode bascule. Elle utilise la méthode PTT de Audio → PTT (CAT / RTS / DTR), avec repli sur le CAT. Choisissez une touche que vous ne tapez jamais en journalisant (ex. Pause, Arrêt défil., ou une pédale mappée dessus) — OpsLog l'intercepte pour qu'elle n'atterrisse pas dans un champ.", 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.xieguPTTLine': 'Passage en \u00e9mission', 'cat.xieguPTTCiv': 'Commande CI-V', 'cat.xieguPTTHint': 'Un G90 ne passe pas en \u00e9mission sur la commande CI-V : les interfaces comme le DE-19 le pilotent par RTS ou DTR. Choisissez la ligne de la v\u00f4tre \u2014 c\u2019est aussi ce qui permet \u00e0 WSJT-X d\u2019\u00e9mettre via le partage CAT.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.kenwoodHostHint': 'Un pont s\u00e9rie-r\u00e9seau \u2014 ser2net, un bo\u00eetier Ethernet-s\u00e9rie, un Raspberry Pi pr\u00e8s de la radio. S\u2019il est rempli, il est utilis\u00e9 \u00c0 LA PLACE du port COM ci-dessus. Il ne s\u2019agit pas de la prise RJ45 de la radio, qui parle le protocole KNS de Kenwood et n\u2019est pas prise en charge.', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.lowerLines': 'Abaisser les lignes DTR et RTS à la connexion', 'cat.lowerLinesHint': 'Windows les lève à l’ouverture du port, et certaines interfaces lisent l’une ou l’autre comme PTT — la radio émet alors tant qu’OpsLog tourne. À cocher seulement dans ce cas : d’autres interfaces ont besoin de RTS haut pour émettre, et l’abaisser rend la radio muette.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9', + 'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un backend CAT natif occupe le port série de la radio, aucun autre logiciel ne peut donc y accéder. Ceci permet à WSJT-X, JTDX, MSHV ou Log4OM de dialoguer avec la radio À TRAVERS OpsLog : dans l'autre logiciel, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532. Fonctionne avec tous les backends, pas seulement les natifs.", 'cat.sharePort': 'Port de partage', 'cat.pttKey': 'Activer la touche PTT', 'cat.pttKeyPress': 'Appuyez sur une touche…', 'cat.pttKeyNone': 'Cliquez pour définir une touche', 'cat.pttKeyClear': 'Effacer', 'cat.pttKeyToggle': 'Mode bascule (appui = émission, nouvel appui = arrêt)', 'cat.pttKeyHint': "Quand OpsLog a le focus, cette touche passe la radio en émission — maintenue par défaut (relâcher pour arrêter), ou verrouillée en mode bascule. Elle utilise la méthode PTT de Audio → PTT (CAT / RTS / DTR), avec repli sur le CAT. Choisissez une touche que vous ne tapez jamais en journalisant (ex. Pause, Arrêt défil., ou une pédale mappée dessus) — OpsLog l'intercepte pour qu'elle n'atterrisse pas dans un champ.", 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.xieguPTTLine': 'Passage en \u00e9mission', 'cat.xieguPTTCiv': 'Commande CI-V', 'cat.xieguPTTHint': 'Un G90 ne passe pas en \u00e9mission sur la commande CI-V : les interfaces comme le DE-19 le pilotent par RTS ou DTR. Choisissez la ligne de la v\u00f4tre \u2014 c\u2019est aussi ce qui permet \u00e0 WSJT-X d\u2019\u00e9mettre via le partage CAT.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.kenwoodHostHint': 'Un pont s\u00e9rie-r\u00e9seau \u2014 ser2net, un bo\u00eetier Ethernet-s\u00e9rie, un Raspberry Pi pr\u00e8s de la radio. S\u2019il est rempli, il est utilis\u00e9 \u00c0 LA PLACE du port COM ci-dessus. Il ne s\u2019agit pas de la prise RJ45 de la radio, qui parle le protocole KNS de Kenwood et n\u2019est pas prise en charge.', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.lowerLines': 'Abaisser les lignes DTR et RTS à la connexion', 'cat.lowerLinesHint': 'Windows les lève à l’ouverture du port, et certaines interfaces lisent l’une ou l’autre comme PTT — la radio émet alors tant qu’OpsLog tourne. À cocher seulement dans ce cas : d’autres interfaces ont besoin de RTS haut pour émettre, et l’abaisser rend la radio muette.', 'cat.kwDataMode': 'Modes data (FT8/PSK…)', 'cat.kwDataUsb': 'USB', 'cat.kwDataMd6': 'Mode DATA — MD6 (Elecraft K3/K4)', 'cat.kwDataKeep': 'Ne pas changer le mode de la radio', 'cat.kwDataHint': "Ce qu'OpsLog règle sur la radio pour un mode data. Aucune commande unique ne convient à toutes : un Elecraft K3/K4 veut DATA (MD6) ; sur un TS-590SG/TS-990S le mode data est un modificateur d'USB réglé sur la radio, choisissez donc USB ou, plus sûr, « Ne pas changer » et passez la radio en DATA vous-même. En MD6 un Kenwood classique (TS-590/990) tomberait en FSK/RTTY — à ne pas utiliser là.", 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9', 'cat.icomNetHost': 'IP / nom d\'hôte du poste', 'cat.icomNetUser': 'Utilisateur réseau (ID)', 'cat.icomNetPass': 'Mot de passe réseau', 'cat.icomNetHint': "Se connecte directement au serveur LAN intégré du poste — sans RS-BA1 ni Remote Utility (ferme-les d'abord). Utilise l'ID/mot de passe Network User1 configurés dans le menu Network du poste. Un poste en veille est allumé automatiquement.", 'cat.icomNetAudio': 'Diffuser l’audio RX par le réseau (expérimental)', diff --git a/frontend/wailsjs/go/models.ts b/frontend/wailsjs/go/models.ts index a27ef02..cdede83 100644 --- a/frontend/wailsjs/go/models.ts +++ b/frontend/wailsjs/go/models.ts @@ -1930,6 +1930,7 @@ export namespace main { kenwood_host: string; kenwood_port: string; kenwood_baud: number; + kenwood_data_mode: string; yaesu_low_lines: boolean; kenwood_low_lines: boolean; icom_port: string; @@ -1975,6 +1976,7 @@ export namespace main { this.kenwood_host = source["kenwood_host"]; this.kenwood_port = source["kenwood_port"]; this.kenwood_baud = source["kenwood_baud"]; + this.kenwood_data_mode = source["kenwood_data_mode"]; this.yaesu_low_lines = source["yaesu_low_lines"]; this.kenwood_low_lines = source["kenwood_low_lines"]; this.icom_port = source["icom_port"]; diff --git a/internal/cat/kenwood.go b/internal/cat/kenwood.go index 0e9644e..4c4fcea 100644 --- a/internal/cat/kenwood.go +++ b/internal/cat/kenwood.go @@ -56,6 +56,12 @@ type Kenwood struct { // a wire, which is how most operators actually put a rig on the network. host string digital string // mode name logged for data (FT8 by default) + // dataMode chooses what CAT mode a DATA/digital mode (FT8, PSK…) sets, because + // no single Kenwood mode digit is right for every rig: "usb" → USB (the SSB-data + // base, default), "data" → the DATA mode digit MD6 (Elecraft K3/K4), "keep" → + // leave the rig's current mode untouched (safest for a TS-590SG/TS-990S whose + // data mode is a USB modifier the operator sets on the rig). See SetMode. + dataMode string mu sync.Mutex port serial.Port @@ -360,6 +366,17 @@ func (k *Kenwood) SetMode(mode string) error { if k.port == nil { return fmt.Errorf("kenwood: not connected") } + // Honour the operator's DATA-mode preference for a digital mode. No single + // mode digit fits every rig, so the operator picks: keep the rig's mode, use + // MD6 (K3/K4 DATA), or fall through to the default USB from kenwoodModeDigit. + if isKenwoodDataMode(mode) { + switch k.dataMode { + case "keep": + return nil // leave whatever data mode the operator set on the rig + case "data": + return k.write("MD6;") // Elecraft K3/K4 DATA mode + } + } d := kenwoodModeDigit(mode, k.curFreq) if d == 0 { return fmt.Errorf("kenwood: no CAT mode for %q", mode) @@ -367,6 +384,25 @@ func (k *Kenwood) SetMode(mode string) error { return k.write(fmt.Sprintf("MD%c;", d)) } +// SetDataMode configures how a DATA/digital mode is set: "usb" (default), "data" +// (MD6, Elecraft K3/K4) or "keep" (don't change the rig's mode). +func (k *Kenwood) SetDataMode(m string) { + k.mu.Lock() + k.dataMode = strings.ToLower(strings.TrimSpace(m)) + k.mu.Unlock() +} + +// isKenwoodDataMode reports whether a mode name is a soundcard/data mode (FT8, +// PSK, JT…) rather than a voice/CW/RTTY mode the rig sets natively. +func isKenwoodDataMode(mode string) bool { + switch strings.ToUpper(strings.TrimSpace(mode)) { + case "", "LSB", "USB", "SSB", "CW", "CW-R", "CWR", "FM", "NFM", "AM", + "RTTY", "FSK", "RTTY-R", "FSK-R": + return false + } + return true +} + func (k *Kenwood) SetPTT(on bool) error { k.mu.Lock() defer k.mu.Unlock() diff --git a/internal/cat/kenwood_test.go b/internal/cat/kenwood_test.go index db72264..0488cd1 100644 --- a/internal/cat/kenwood_test.go +++ b/internal/cat/kenwood_test.go @@ -111,6 +111,23 @@ func TestKenwoodModeDigit(t *testing.T) { } } +// The DATA-mode preference only applies to soundcard/data modes, never to voice, +// CW or native RTTY — getting this wrong would hijack an SSB or CW mode change. +func TestIsKenwoodDataMode(t *testing.T) { + data := []string{"FT8", "FT4", "PSK31", "JT65", "DATA", "DIGITAL", "OLIVIA"} + notData := []string{"", "LSB", "USB", "SSB", "CW", "CW-R", "FM", "AM", "RTTY", "FSK", "RTTY-R"} + for _, m := range data { + if !isKenwoodDataMode(m) { + t.Errorf("isKenwoodDataMode(%q) = false, want true", m) + } + } + for _, m := range notData { + if isKenwoodDataMode(m) { + t.Errorf("isKenwoodDataMode(%q) = true, want false", m) + } + } +} + // What the log records for each mode digit the rig reports. func TestKenwoodModeToADIF(t *testing.T) { cases := []struct {