feat: Adding XIT RIT in the Flex panel
This commit is contained in:
@@ -6,6 +6,7 @@ import {
|
||||
FlexMox, FlexAmpOperate,
|
||||
GetPGXLStatus, PGXLSetFanMode,
|
||||
FlexSetAGCMode, FlexSetAGCThreshold, FlexSetAudioLevel, FlexSetMute, FlexSetRXAntenna, FlexSetTXAntenna, FlexSetSplit, FlexSetActiveSlice, FlexSetTXSlice,
|
||||
FlexSetRIT, FlexSetRITFreq, FlexSetXIT, FlexSetXITFreq,
|
||||
FlexSetNB, FlexSetNBLevel, FlexSetNR, FlexSetNRLevel, FlexSetANF, FlexSetANFLevel,
|
||||
FlexSetWNB, FlexSetWNBLevel, FlexSetTXFilter, FlexSetMicProfile,
|
||||
FlexSetAPF, FlexSetAPFLevel, FlexSetCWSpeed, FlexSetCWPitch, FlexSetCWBreakInDelay,
|
||||
@@ -25,6 +26,7 @@ type FlexState = {
|
||||
rx_avail: boolean; agc_mode?: string; agc_threshold: number; audio_level: number; mute: boolean;
|
||||
rx_ant?: string; tx_ant?: string; ant_list?: string[]; tx_ant_list?: string[];
|
||||
split: boolean; rx_freq_hz?: number; tx_freq_hz?: number;
|
||||
rit: boolean; rit_freq: number; xit: boolean; xit_freq: number;
|
||||
nb: boolean; nb_level: number; nr: boolean; nr_level: number; anf: boolean; anf_level: number;
|
||||
wnb: boolean; wnb_level: number;
|
||||
tx_filter_low: number; tx_filter_high: number; mic_profile?: string; mic_profiles?: string[];
|
||||
@@ -44,6 +46,7 @@ const ZERO: FlexState = {
|
||||
vox_enable: false, vox_level: 0, vox_delay: 0, proc_enable: false, proc_level: 0,
|
||||
mon: false, mon_level: 0, mic_level: 0, atu_memories: false,
|
||||
rx_avail: false, agc_threshold: 0, audio_level: 0, mute: false, split: false,
|
||||
rit: false, rit_freq: 0, xit: false, xit_freq: 0,
|
||||
nb: false, nb_level: 0, nr: false, nr_level: 0, anf: false, anf_level: 0,
|
||||
wnb: false, wnb_level: 0, tx_filter_low: 0, tx_filter_high: 0,
|
||||
cw_speed: 25, cw_pitch: 600, cw_break_in_delay: 30, cw_sidetone: true, cw_mon_level: 0,
|
||||
@@ -143,6 +146,67 @@ function LevelRow({ label, on, onToggle, value, onLevel, disabled, accent, slide
|
||||
);
|
||||
}
|
||||
|
||||
// OffsetRow — RIT / XIT: a switch plus one signed offset field you scrub with the
|
||||
// wheel (or ± , or the arrow keys once focused; hold Ctrl/Shift for 100 Hz steps).
|
||||
// Deliberately the same control as the Icom panel's ShiftRow, so the two rigs are
|
||||
// driven identically.
|
||||
//
|
||||
// The offset is NOT cleared when the switch goes off: SmartSDR keeps it, so
|
||||
// flipping RIT back on returns you exactly where you were, like the radio's own
|
||||
// knob. Zeroing it is a separate, deliberate act — that is what the 0 button is for.
|
||||
const OFFSET_MAX = 99999; // SmartSDR's limit
|
||||
function OffsetRow({ label, on, onToggle, hz, onHz, disabled, title }: {
|
||||
label: string; on: boolean; onToggle: () => void; hz: number; onHz: (v: number) => void;
|
||||
disabled?: boolean; title?: string;
|
||||
}) {
|
||||
const ref = useRef<HTMLDivElement>(null);
|
||||
const step = useRef((_d: number) => {});
|
||||
step.current = (d: number) => onHz(Math.max(-OFFSET_MAX, Math.min(OFFSET_MAX, (hz || 0) + d)));
|
||||
|
||||
// React's onWheel is passive, so preventDefault() there is ignored and the panel
|
||||
// scrolls under the cursor instead of the value changing. Bind it natively.
|
||||
useEffect(() => {
|
||||
const el = ref.current;
|
||||
if (!el) return;
|
||||
const onWheel = (e: WheelEvent) => {
|
||||
e.preventDefault();
|
||||
const mag = e.ctrlKey || e.shiftKey ? 100 : 10;
|
||||
step.current(e.deltaY < 0 ? mag : -mag);
|
||||
};
|
||||
el.addEventListener('wheel', onWheel, { passive: false });
|
||||
return () => el.removeEventListener('wheel', onWheel);
|
||||
}, []);
|
||||
|
||||
const onKey = (e: React.KeyboardEvent) => {
|
||||
const up = e.key === 'ArrowUp' || e.key === 'ArrowRight';
|
||||
const dn = e.key === 'ArrowDown' || e.key === 'ArrowLeft';
|
||||
if (!up && !dn) return;
|
||||
e.preventDefault();
|
||||
const mag = e.ctrlKey || e.shiftKey ? 100 : 10;
|
||||
step.current(up ? mag : -mag);
|
||||
};
|
||||
|
||||
return (
|
||||
<div className="flex items-center gap-2" title={title}>
|
||||
<Chip on={on} onClick={onToggle} label={label} disabled={disabled} accent="cyan" />
|
||||
<div ref={ref} tabIndex={disabled || !on ? -1 : 0} onKeyDown={onKey}
|
||||
className={cn('flex-1 flex items-center justify-between rounded-md border px-1 py-0.5 select-none',
|
||||
'focus:outline-none focus:ring-2 focus:ring-info/50',
|
||||
on && !disabled ? 'border-border bg-muted/40 cursor-ns-resize' : 'border-border/60 bg-muted/20 opacity-60')}>
|
||||
<button type="button" disabled={disabled || !on} onClick={() => step.current(-10)}
|
||||
className="px-2 text-sm font-bold text-muted-foreground hover:text-foreground disabled:hover:text-muted-foreground">−</button>
|
||||
<span className={cn('text-sm font-mono font-bold tabular-nums', on && hz ? 'text-info' : 'text-muted-foreground')}>
|
||||
{hz > 0 ? '+' : hz < 0 ? '−' : ''}{Math.abs(hz || 0)} Hz
|
||||
</span>
|
||||
<button type="button" disabled={disabled || !on} onClick={() => step.current(10)}
|
||||
className="px-2 text-sm font-bold text-muted-foreground hover:text-foreground disabled:hover:text-muted-foreground">+</button>
|
||||
</div>
|
||||
<button type="button" disabled={disabled || !hz} onClick={() => onHz(0)}
|
||||
className="w-8 shrink-0 py-1 rounded-md text-[11px] font-bold border border-border bg-card text-muted-foreground hover:bg-muted disabled:opacity-30">0</button>
|
||||
</div>
|
||||
);
|
||||
}
|
||||
|
||||
// MeterBar — a segmented "LED" instrument bar (radio look) scaled by lo/hi.
|
||||
// `display` overrides the numeric readout; `segColor` colours segments by their
|
||||
// 0..1 position (zones); the top ~18% light red by default (overload/peak).
|
||||
@@ -454,6 +518,7 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
|
||||
)}
|
||||
</div>
|
||||
|
||||
|
||||
{!isCW ? (
|
||||
<div className="border-t border-border/60 pt-3 space-y-3">
|
||||
<div className="flex items-center gap-2">
|
||||
@@ -560,6 +625,18 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
|
||||
</div>
|
||||
</div>
|
||||
)}
|
||||
{/* RIT / XIT — on the RECEIVE side: RIT is what you reach for while
|
||||
listening (chasing a station that drifts off your transmit frequency),
|
||||
so it belongs with the other things you touch mid-QSO. Both act on the
|
||||
ACTIVE slice and follow slice focus like every control here. */}
|
||||
<div className="space-y-1.5 pb-3 border-b border-border/60">
|
||||
<OffsetRow label="RIT" on={st.rit} disabled={rxOff} hz={st.rit_freq} title={t('flxp.ritHint')}
|
||||
onToggle={() => change('rit', !st.rit, () => FlexSetRIT(!st.rit))}
|
||||
onHz={(v) => change('rit_freq', v, () => FlexSetRITFreq(v))} />
|
||||
<OffsetRow label="XIT" on={st.xit} disabled={rxOff} hz={st.xit_freq} title={t('flxp.xitHint')}
|
||||
onToggle={() => change('xit', !st.xit, () => FlexSetXIT(!st.xit))}
|
||||
onHz={(v) => change('xit_freq', v, () => FlexSetXITFreq(v))} />
|
||||
</div>
|
||||
<div className="flex items-center gap-2">
|
||||
<span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">AGC</span>
|
||||
<Segmented value={(st.agc_mode || 'med').toLowerCase()} options={AGC} disabled={rxOff}
|
||||
|
||||
@@ -231,6 +231,7 @@ const en: Dict = {
|
||||
'wkp.autoCallHint': 'Click a CQ macro (one whose text contains CQ) to resend it on a loop — message, gap, repeat — until you send another macro (e.g. a report), press Stop, or hit ESC. Non-CQ macros send once.', 'wkp.autoCall': 'Auto-call', 'wkp.gap': 'gap', 'wkp.gapHint': 'Seconds to wait after the message before resending', 'wkp.loopHint': 'click a CQ macro to loop it', 'wkp.macroN': 'Macro {n}',
|
||||
'dvkp.voiceKeyer': 'Voice keyer', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Disable voice keyer', 'dvkp.noMsgPre': 'No messages recorded yet. Open', 'dvkp.settingsPath': 'Settings → Audio devices & voice keyer', 'dvkp.noMsgPost': 'to record F1–F6.', 'dvkp.transmit': 'Transmit F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — empty', 'dvkp.message': 'message',
|
||||
'agp.portDeselect': 'Port {letter} — click to deselect', 'agp.portSelect': 'Select on port {letter}', 'agp.online': 'online', 'agp.offline': 'offline', 'agp.close': 'Close', 'agp.connecting': 'Connecting…', 'agp.noAntennas': 'No antennas configured.', 'agp.filterOnHint': 'Showing antennas for {band} only — click to show all bands', 'agp.filterOffHint': 'Showing all antennas — click to show only the current band',
|
||||
'flxp.ritHint': 'RIT — shifts your RECEIVE frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.', 'flxp.xitHint': 'XIT — shifts your TRANSMIT frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.',
|
||||
'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
|
||||
'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER',
|
||||
'icmp.spectrum': 'Spectrum', 'icmp.scopeFixed': 'Fixed — double-click / wheel to tune', 'icmp.scopeCenter': 'Center — follows VFO', 'icmp.scopeOff': 'Scope off', 'icmp.scopePanDown': 'Shift scope −50 kHz', 'icmp.scopePanUp': 'Shift scope +50 kHz', 'icmp.scopeCenterVfo': 'Center scope on the current frequency (±50 kHz)', 'icmp.notConnected': "Icom not connected. Enable the Icom CI-V backend in Settings → CAT and connect the radio's USB port.", 'icmp.refresh': 'Refresh', 'icmp.meters': 'Meters', 'icmp.transmit': 'Transmit', 'icmp.power': 'Power', 'icmp.mic': 'Mic', 'icmp.receive': 'Receive', 'icmp.preamp': 'Preamp', 'icmp.filter': 'Filter', 'icmp.noiseNotch': 'Noise / Notch', 'icmp.autoNotch': 'Auto notch filter', 'icmp.apf': 'Audio peak filter (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Wheel or ± to shift · Ctrl+←/→ shifts RIT when active', 'icmp.bandsAntenna': 'Bands & Antenna', 'icmp.antenna': 'Antenna', 'icmp.passband': 'Passband / Notch', 'icmp.pbtCenter': 'Center PBT', 'icmp.manualNotch': 'Manual notch — MN on, then set position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Power the radio ON (boots ~15 s)', 'icmp.powerOffHint': 'Power the radio OFF', 'icmp.powerOffConfirm': 'Switch the radio OFF?',
|
||||
@@ -478,6 +479,7 @@ const fr: Dict = {
|
||||
'wkp.autoCallHint': "Clique une macro CQ (dont le texte contient CQ) pour la réémettre en boucle — message, pause, répétition — jusqu'à envoyer une autre macro (ex. un report), appuyer sur Stop ou ESC. Les macros non-CQ ne sont émises qu'une fois.", 'wkp.autoCall': 'Appel auto', 'wkp.gap': 'pause', 'wkp.gapHint': 'Secondes à attendre après le message avant de réémettre', 'wkp.loopHint': 'clique une macro CQ pour la boucler', 'wkp.macroN': 'Macro {n}',
|
||||
'dvkp.voiceKeyer': 'Manipulateur vocal', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Désactiver le manipulateur vocal', 'dvkp.noMsgPre': 'Aucun message enregistré. Ouvre', 'dvkp.settingsPath': 'Réglages → Périphériques audio & manipulateur vocal', 'dvkp.noMsgPost': 'pour enregistrer F1–F6.', 'dvkp.transmit': 'Émettre F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — vide', 'dvkp.message': 'message',
|
||||
'agp.portDeselect': 'Port {letter} — clic pour désélectionner', 'agp.portSelect': 'Sélectionner sur le port {letter}', 'agp.online': 'en ligne', 'agp.offline': 'hors ligne', 'agp.close': 'Fermer', 'agp.connecting': 'Connexion…', 'agp.noAntennas': 'Aucune antenne configurée.', 'agp.filterOnHint': 'Antennes du {band} uniquement — clic pour afficher toutes les bandes', 'agp.filterOffHint': 'Toutes les antennes affichées — clic pour n’afficher que la bande courante',
|
||||
'flxp.ritHint': "RIT — décale uniquement ta fréquence de RÉCEPTION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.", 'flxp.xitHint': "XIT — décale uniquement ta fréquence d'ÉMISSION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.",
|
||||
'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
|
||||
'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR',
|
||||
'icmp.spectrum': 'Spectre', 'icmp.scopeFixed': 'Fixe — double-clic / molette pour accorder', 'icmp.scopeCenter': 'Centré — suit le VFO', 'icmp.scopeOff': 'Scope éteint', 'icmp.scopePanDown': 'Décaler le scope −50 kHz', 'icmp.scopePanUp': 'Décaler le scope +50 kHz', 'icmp.scopeCenterVfo': 'Centrer le scope sur la fréquence actuelle (±50 kHz)', 'icmp.notConnected': 'Icom non connecté. Active le backend CI-V Icom dans Réglages → CAT et connecte le port USB de la radio.', 'icmp.refresh': 'Rafraîchir', 'icmp.meters': 'Mesures', 'icmp.transmit': 'Émission', 'icmp.power': 'Puissance', 'icmp.mic': 'Micro', 'icmp.receive': 'Réception', 'icmp.preamp': 'Préampli', 'icmp.filter': 'Filtre', 'icmp.noiseNotch': 'Bruit / Notch', 'icmp.autoNotch': 'Filtre notch auto', 'icmp.apf': 'Filtre de pic audio (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Molette ou ± pour décaler · Ctrl+←/→ décale le RIT si actif', 'icmp.bandsAntenna': 'Bandes & Antenne', 'icmp.antenna': 'Antenne', 'icmp.passband': 'Passe-bande / Notch', 'icmp.pbtCenter': 'Centrer PBT', 'icmp.manualNotch': 'Notch manuel — active MN, puis règle la position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Allumer la radio (démarre en ~15 s)', 'icmp.powerOffHint': 'Éteindre la radio', 'icmp.powerOffConfirm': 'Éteindre la radio ?',
|
||||
|
||||
Reference in New Issue
Block a user