feat: record a contact by hand when automatic recording is off

A red dot in the slot the counter will occupy. Click it and the counter starts,
the dot disappears, and logging the QSO writes the file exactly as an automatic
recording would — the save path already keyed off an active take, not off the
setting.

With automatic recording disabled the capture engine is not idle, it is not
running at all, so a manual take starts it. Two consequences handled here:

  - It is released again when the take ends — logged, cancelled, or dropped for
    being a digital mode. An operator who records one contact does not expect
    their microphone held open for the rest of the session. The release is a
    deferred call at the top of the save path so every exit goes through it,
    rather than one that has to be remembered at each return.
  - There is no pre-roll. An automatic recording opens with the seconds BEFORE
    the callsign was typed; a manual one can only begin now. The button's
    tooltip says so, because otherwise the difference between two files is a
    mystery to the person holding them.

The button only appears where it can work: devices configured, automatic
recording off, and a mode whose audio is worth keeping. That state is asked of
the backend rather than inferred from a preference in the interface, so the two
cannot drift apart, and it is re-read when settings are saved.

frontend/src/lib/i18n.tsx

@@ -135,7 +135,7 @@ const en: Dict = {
   'imp.ctyDesc': "Recompute Country, DXCC & CQ/ITU zones from cty.dat, overriding the file — corrects what contest software exports wrong (e.g. RG2Y as Asiatic instead of European Russia). ClubLog's DXpedition overrides are applied on top per QSO date (e.g. TO974REF → Reunion, TO2A 2012 → French Guiana) whenever the ClubLog data is downloaded. Everything else in the ADIF is kept as-is. Tip: use Update duplicates to re-fix QSOs already in your log.",
   'imp.stationTitle': 'Fill my station fields from my profile',
   'imp.stationDesc': "Backfill empty MY_* fields (my grid, rig, antenna, address, city, state, county, SOTA/POTA ref, TX power…) plus Operator and Owner callsign from your active profile. Existing values are kept. Only STATION_CALLSIGN is left untouched so a mixed-call log isn't re-routed. It ALSO stamps your default confirmation statuses (paper QSL, LoTW, eQSL, Club Log, HRDLog, QRZ.com sent and received) on the ones the file leaves empty — a WSJT-X log carries almost none. Enable when importing your own log.",
-  'imp.cancel': 'Cancel', 'imp.mapAdd': 'The file puts a field in the wrong place\u2026', 'imp.mapTitle': 'Move fields on import', 'imp.mapDesc': 'Contest software stores the exchange where its own module keeps it. The RSGB IOTA contest exports the island reference in STATE \u2014 imported as-is it becomes a US state and the IOTA award stays empty. The destination is only filled where the file left it blank.', 'imp.mapMore': 'Add another', 'imp.import': 'Import',
+  'imp.cancel': 'Cancel', 'rec.manualStart': 'Record this contact. Automatic recording is off, so capture starts now \u2014 there is no pre-roll of what came before.', 'rec.manualFailed': 'Recording could not be started \u2014 check the audio devices in Settings.', 'imp.mapAdd': 'The file puts a field in the wrong place\u2026', 'imp.mapTitle': 'Move fields on import', 'imp.mapDesc': 'Contest software stores the exchange where its own module keeps it. The RSGB IOTA contest exports the island reference in STATE \u2014 imported as-is it becomes a US state and the IOTA award stays empty. The destination is only filled where the file left it blank.', 'imp.mapMore': 'Add another', 'imp.import': 'Import',
   'imp.progressTitle': 'Importing ADIF…', 'bulk.progressTitle': 'Updating the selected QSOs\u2026',
   'imp.progressCount': '{done} / {tot} records · {pct}%', 'imp.progressCountOnly': '{done} records…',
   'imp.complete': 'Import complete.',
@@ -546,7 +546,7 @@ const fr: Dict = {
   'imp.ctyDesc': "Recalcule Pays, DXCC & zones CQ/ITU depuis cty.dat, en écrasant le fichier — corrige ce que les logiciels de contest exportent mal (ex. RG2Y en Russie asiatique au lieu d'européenne). Les exceptions DXpédition de ClubLog s'appliquent par-dessus selon la date du QSO (ex. TO974REF → Réunion, TO2A 2012 → Guyane française) dès que les données ClubLog sont téléchargées. Tout le reste de l'ADIF est conservé tel quel. Astuce : utilise Mettre à jour les doublons pour re-corriger des QSO déjà dans le log.",
   'imp.stationTitle': 'Remplir mes champs station depuis mon profil',
   'imp.stationDesc': "Complète les champs MY_* vides (locator, rig, antenne, adresse, ville, état, comté, réf. SOTA/POTA, puissance TX…) plus Opérateur et Indicatif propriétaire depuis le profil actif. Les valeurs existantes sont conservées. Seul STATION_CALLSIGN n'est jamais touché pour ne pas re-router un log multi-indicatifs. Elle applique AUSSI tes statuts de confirmation par défaut (QSL papier, LoTW, eQSL, Club Log, HRDLog, QRZ.com envoyé et reçu) sur ceux que le fichier laisse vides — un log WSJT-X n'en contient pratiquement aucun. À activer quand tu importes ton propre log.",
-  'imp.cancel': 'Annuler', 'imp.mapAdd': 'Le fichier met un champ au mauvais endroit\u2026', 'imp.mapTitle': 'D\u00e9placer des champs \u00e0 l\u2019import', 'imp.mapDesc': 'Les logiciels de concours rangent l\u2019\u00e9change l\u00e0 o\u00f9 leur module le garde. Le contest IOTA de la RSGB exporte la r\u00e9f\u00e9rence d\u2019\u00eele dans STATE \u2014 import\u00e9e telle quelle elle devient un \u00e9tat am\u00e9ricain et le dipl\u00f4me IOTA reste vide. La destination n\u2019est remplie que l\u00e0 o\u00f9 le fichier l\u2019a laiss\u00e9e vide.', 'imp.mapMore': 'Ajouter une ligne', 'imp.import': 'Importer',
+  'imp.cancel': 'Annuler', 'rec.manualStart': 'Enregistrer ce contact. L\u2019enregistrement automatique est d\u00e9sactiv\u00e9 : la capture commence maintenant, sans les secondes qui pr\u00e9c\u00e8dent.', 'rec.manualFailed': 'L\u2019enregistrement n\u2019a pas pu d\u00e9marrer \u2014 v\u00e9rifiez les p\u00e9riph\u00e9riques audio dans les R\u00e9glages.', 'imp.mapAdd': 'Le fichier met un champ au mauvais endroit\u2026', 'imp.mapTitle': 'D\u00e9placer des champs \u00e0 l\u2019import', 'imp.mapDesc': 'Les logiciels de concours rangent l\u2019\u00e9change l\u00e0 o\u00f9 leur module le garde. Le contest IOTA de la RSGB exporte la r\u00e9f\u00e9rence d\u2019\u00eele dans STATE \u2014 import\u00e9e telle quelle elle devient un \u00e9tat am\u00e9ricain et le dipl\u00f4me IOTA reste vide. La destination n\u2019est remplie que l\u00e0 o\u00f9 le fichier l\u2019a laiss\u00e9e vide.', 'imp.mapMore': 'Ajouter une ligne', 'imp.import': 'Importer',
   'imp.progressTitle': 'Import ADIF en cours…', 'bulk.progressTitle': 'Mise \u00e0 jour des QSO s\u00e9lectionn\u00e9s\u2026',
   'imp.progressCount': '{done} / {tot} enregistrements · {pct}%', 'imp.progressCountOnly': '{done} enregistrements…',
   'imp.complete': 'Import terminé.',