chore: release v0.22.9

wiki/Maps-and-Antennas.md

@@ -3,36 +3,48 @@
 ## Main view
 
 The Main view is **two configurable panes** (per profile, Settings → General →
-*Main view*). Choose from: great-circle map, locator (street) map, the cluster
-grid, the worked-before grid, recent QSOs, the **FlexRadio** controls, the
-**Icom** console, or the **Net control** panel.
+*Main view*), with a **draggable divider** between them (double-click it to
+even them out). Choose from: great-circle map, locator (street) map, the
+cluster grid, the worked-before grid, recent QSOs, the **FlexRadio** controls,
+the **Icom** or **Yaesu** console, or the **Net control** panel.
 
 ## Great-circle map
 
 - Short/long-path **distance & azimuth** to the worked station.
-- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite (all
-  labelled).
+- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite.
 - The **antenna beam lobe(s)** are drawn from the rotor azimuth.
+- **Day/night terminator** and twilight band (button at the top right).
 
 ## Locator (street) map
 
 An OSM street map centred on the contacted grid square — handy for local /
 portable contacts. No API key.
 
-## Rotor compass
+## Rotators
 
-An azimuthal-equidistant **click-to-turn** compass driven by **PstRotator**. The
-current heading and target are shown; click a bearing to turn the rotor.
+An azimuthal-equidistant **click-to-turn** compass; the current heading and
+target are shown. Three rotator types (Settings → Rotator):
 
-## Ultrabeam
+- **PstRotator** — via its UDP interface.
+- **microHAM ARCO** — native, over LAN or USB: set the ARCO's CONTROL PROTOCOL
+  to *Yaesu GS-232A*.
+- **GS-232A (generic)** — any GS-232A controller, ERC (Easy Rotor Control)
+  included; serial speed selectable. Set an ERC to GS-232 emulation, not
+  Hy-Gain DCU-1.
 
-Ultrabeam antennas are supported with three modes — **Normal**, **180° reverse**,
+## Motorized antennas (Ultrabeam / SteppIR)
+
+Both follow the **rig frequency** (band change → retune) and retune immediately
+when you click a spot, with three modes — **Normal**, **180° reverse**,
 **Bidirectional**:
 
 - The **radiating direction** is shown in green and the **mechanical boom** in
-  grey, on both the compass and the map, so you always know where the antenna
-  actually points.
-- The antenna **follows the rig frequency** (band change → retune), and retunes
-  immediately when you click a spot.
+  grey, on both the compass and the map.
+- On a FlexRadio, transmit is **inhibited while the elements move**, and
+  released as soon as the antenna is tuned.
+- **SteppIR — Tunable range** (Settings → Hardware → Antenna, default
+  13–54 MHz): outside it OpsLog leaves the antenna and the TX interlock
+  completely alone, so tuning to 30 m on a 20 m–6 m SteppIR does nothing.
 
-Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch).
+Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch, Tuner
+Genius, relays).