The shortened transmit gag was written for an Ultrabeam that is now polled
four times a second while it moves. The SteppIR was still on two seconds
and reported nothing at all until its own poll came round, so the gap
between the 900 ms grace and the first poll that would have seen the
movement was a hole in "block TX while the elements travel" — the
transmitter released in the middle of a move.
It now reports a commanded move at once (bounded, so an antenna that
never answers cannot latch the inhibit on), on a COPY of the cached
status so the flag cannot leak into what the poll goroutine owns, and
follows the motors with its poll rate exactly as the Ultrabeam does.
The motorised antenna gagged the transmitter for a second or two after it
had finished moving. Three delays were stacked: the antenna polled every
two seconds, the gag held for three after the command whatever the
antenna said, and the widget refreshed every three. The antenna is now
asked four times a second WHILE IT MOVES — an idle one has nothing to say
and stays at two seconds — the gag only bridges the command itself
(900 ms), and the widget follows at half a second while moving.
WSJT-X highlighting:
- A watch-list station already worked on this band and mode is no longer
painted as one to call. The list is a statement of intent, not of what
is left to do, and its pink outranked every other verdict including the
log's, so a worked station stayed pink for the session with nothing to
tell it from one still needed.
- The four colours are the operator's to choose (Settings → UDP). Only
the background: the text colour is derived by luma, so a dark blue
cannot come back as black-on-black in somebody else's window. Changing
one clears the installed highlights, or the de-duplication would keep
showing yesterday's colour until a callsign changed verdict.
The conninfo that authorises the RX stream goes out during the login,
before the audio socket exists — it has to, since it is what authorises
it. So the rig is told to send audio to :50003 while nothing is bound
there, gets an ICMP port-unreachable back, backs off, and the audio turns
up only when its own retry timer comes round: twenty to thirty seconds by
the operator's watch, ninety in one log.
It is sent once more the moment the port is listening, which is the same
message the session already carries — RS-BA1 repeats it too. The audio
dial moved above the pumps, because after ctrlPump is running the
control-stream auth state belongs to it.
"I turned the sound back on and nothing comes out of the speakers", with
a log that reports success at every step: the network audio stream up,
664-byte packets arriving, the monitor started. The render goroutine's
error was thrown away — a device unplugged, renamed by Windows or unable
to open at 16 kHz fails exactly there, silently.
It is logged now, with the device id. Two once-only lines either side of
it say whether the decoded audio is reaching a running monitor or
arriving with nobody listening, which separates a device fault from the
speakers simply being switched off.
The guard I added for services with no credentials demanded one, and
nobody has ever set it: OpsLog carries its own Club Log APPLICATION key
(clublogAppAPIKey), so the account is an email, a password and the
logbook callsign. An operator whose live upload had been working for
months was told the service was not configured the moment he sent QSOs by
hand after an import.
Written in app.go, the rules drifted from the uploaders on the first try.
They now live in internal/extsvc beside the Upload* functions that
enforce them, each case mirroring that function's own guard — which also
caught Cloudlog, where the station profile is required and the check did
not ask for it. The message names the fields actually missing rather than
listing everything the service takes.
Audio off, and the IC-7760 still answers at connect and then never again:
twenty-eight commands sent, not one reply, packets still arriving on the
stream. A count says how much went unanswered and never which command
went out last — which is the one thing that can identify a frame this rig
does not tolerate, on a radio nobody here has.
The transport now keeps the command headers of the last eight frames and
prints them with the silence report.
The RX audio stream is experimental and shares the rig's session with
CI-V. The shape in an operator's log is unmistakable: audio packets
arriving by the hundred while not one CI-V reply comes back, the watchdog
tearing the session down, twenty seconds' pause, and the whole thing
again — read from outside as "the Icom keeps disconnecting", with
nothing pointing at the switch that would end it.
The log now says it, and names the setting. icomAudio counts what it has
delivered so the line distinguishes "audio is enabled" from "audio is
arriving", which is the half that makes it a suspect.
From an operator's log: an IC-7760 in standby, and OpsLog dialling and
dropping every forty seconds for as long as it was left there — control
link up, login OK, token renewed, and not one CI-V answer.
lastGoodAt bounds "the link answers but no CI-V comes back". It belongs
to a session and was never cleared when a new one opened, so a rig that
went to standby half an hour ago handed every fresh session a
half-hour-old last good read: past the grace before the first command was
even sent. Torn down at once, redialled twenty seconds later, torn down
again. Cleared on connect, the rule reads as it was written — silent
since connect is a rig in standby, and the session is kept so it can be
woken.
The console it is woken from was missing too. It appeared only once the
live CAT state said "icom", which a sleeping rig never says, so the ON
button was absent at the one moment it exists for. It now follows the
CONFIGURED radio — which also had to start following a radio switched
from the status bar, instead of waiting for a trip through Settings and a
Save that changed nothing.
An exported file was full of blank gaps: a record ran down a dozen lines
and the next appeared to start in the middle of the page. ADDRESS is a
multi-line field by the standard and callbooks and other loggers fill it
that way — "Kabul", four blank lines, "Afghanistan" — and the writer
copied the value out as it stood. The files were always valid, since ADIF
counts bytes; they were unreadable, and so was anything that quoted them.
Line breaks inside a value are now joined with a comma and tabs become
spaces, which is how an address reads on one line anyway. The length
prefix is computed after the flattening, so the record stays exact, and
every path through the writer gets it: the file exports, the uploads and
the record forwarded over UDP.
The changelog's 0.27.15 block also takes back the FT-map hover fix, which
landed after the 0.27.14 release commit and was sitting in that block.
The rest between two series was two minutes — four overs on FT8, by
which time the DX has worked four other callers and half the time has
gone. It is now counted in the station's OWN overs and is one by default:
seven calls, one over listened through, and it goes again if the station
is still there. The deadline lands mid-cycle on purpose, so "sit out one
over" means one over rather than depending on a millisecond of clock
skew.
A period the target was DECODED in is never counted as a miss. A period
is judged more than once — decodes arrive in a burst and stragglers
follow — and a later judgement holds a partial view of it, not evidence
of absence: D2ACE answered in the very period the counter then read as a
miss.
The readout moved out of the Auto button and beside it. "Auto D2ACE 1/7
·1/3" read as one number, and the control changed width every period.
The callsign is now the biggest thing on the row, the calls and the
missed periods each carry a label, the miss count appears only once there
is one, and a station being waited for gets its own amber chip.
The mouse wheel steps the RST fields — one S-unit on an RST or RS, one
decibel on a digital report, up for a better one — in the entry strip and
in the QSO editor. The dropdown beside them lists the reports worth
having to hand, not all 41 decibels, so the wheel works on the value
rather than walking the list. The listener is native and non-passive:
React attaches onWheel passively, where preventDefault does nothing and
the panel scrolls away under the field being adjusted.
PSK Reporter, whole-band scope: clicking a decode reset the report count
to zero. The window there is the BAND's — every FTx report on it,
filtered by target only when the analysis is drawn — and it was emptied
on every target change, throwing away an hour of evidence at the moment
the operator asked the question it answers. The narrow scope still clears
it: there the window is one station's, and keeping it would answer the
new question with the old station's evidence.
ZD8GB — watch-listed, six streams a period, two of them RR73 — was
refused as "parked" for the rest of the session. Parking answers "it
will not answer, stop wasting the evening on it", which is a fair verdict
about a station the LOG picked out and the wrong one about a station the
OPERATOR named: a DXpedition running a pileup takes more than two series
of calls to get through to, which is exactly why it is on the list. The
rest between series still applies, so it cannot monopolise the
transmitter — it simply never becomes ineligible.
Send to (right-click) now refuses a service with no credentials and says
which are missing. The upload runs on its own goroutine and reports into
the QSL Manager's console, which is not open when the command came from
the QSO list, so an upload to an unconfigured service looked exactly like
one that worked. The toast is also raised only once the backend has
accepted the request, and Cloudlog / Wavelog and HamQTH name themselves
in it.
Three field reports.
Icom CI-V address 00 could not be kept: zero was read as "not
configured" in all three places that validate it, so every save put the
rig back to the IC-7610's 0x98 — and the model dropdown followed, since
it is derived from the address rather than stored. Picking "Other
(custom address)" also had no effect of its own: the list re-derived
itself and snapped back to whatever rig matched. It now stays chosen.
Cloudlog/Wavelog showed "17m/17m" on ordinary FT8 contacts (OE6CLD).
Every QSO is stamped with a receive side equal to the transmit side, and
the uploaded record carried it; Wavelog draws band/band_rx whenever both
are there. In ADIF an absent BAND_RX means "same as transmit", so the
uploaded record now writes the receive side only when it differs. The
copy forwarded to another logger over UDP keeps writing it in full —
that is why it was stamped in the first place (Log4OM reads BAND_RX) —
through its own ForwardRecordADIF.
"S/F" in a spot comment joins superfox / sfox / F-H as FT8.
The watch list was a tab, and an operator working FT8 lives on the decodes
one: a station they had asked to be told about turned up on a screen they
were not looking at. The same answer is now docked in the widget strip,
above the tabs, reduced to what is worth acting on — on the air and still
needed, one row per band and mode, with the cluster's own NEW DXCC /
NEW BAND / NEW SLOT badge and a click that tunes. Off by default. The
"active and needed" answer costs a debounced query per visible slot, so it
is written once (lib/watchlistSpots) and the tab uses it too.
Auto-call:
- It answers a new prefix, county, state, square or park. Those markers
are orthogonal to the entity, they ranked as nothing-needed, and the
engine sat through a never-worked WPX prefix calling CQ. New rung at
the foot of the ladder, gated by the chase switches the badges use —
which meant making those switches portable, since the backend cannot
read localStorage.
- It calls THROUGH a pileup. Giving up the moment the DX answered
somebody else is precisely how a queue is not worked; the call and miss
counters already bound the effort, and a station in mid-exchange is
still never chosen as a new target.
The PSK Reporter panel now follows the station auto-call is waiting for:
the analysis takes a history query and a period or two to fill, so
starting it when the DX comes free is starting it too late.
Callbook lookup: a compound callsign with a page of its OWN keeps that
page's location. QRZ files HP/WE9G under exactly that form, with the
Panama square the station is operating from, and the rule that drops a
home address from a portable call was throwing it away. The record's own
country tells an operation's page from a home page.
Changelog: entries may open with [NEW], drawn as a pill in the What's new
dialog — a release is mostly fixes and the two or three genuinely new
things should not have to be found by reading all of it.
Six faults from an evening on 60 m, all in the same family: the engine
judging a station by what the log wants from it and forgetting what is
already under way.
- An exchange was abandoned mid-QSO. The reply lands in the same period
the ladder is re-read, and that period was judged before the reply was
taken into account, so a better-ranked caller took the slot from a
station that had just come back to us. The answer is settled first now,
and our own report counts as being inside the exchange too — which also
protects a QSO the operator started by hand.
- A station just picked started with misses against it. Its transmit slot
was unknown until a second decode, and with the parity unknown every
period counted, including the one spent transmitting to it.
- The freed slot after "it is working somebody else" was thrown away: the
period's decodes are in hand, so the next station is picked from them
rather than fifteen seconds later. Never mid-over.
- Auto-call is never armed from a stored setting — not at launch, not on
a profile switch. It is the one feature that puts the station on the
air by itself and OpsLog starts with Windows.
- It says what it is waiting for: a wanted station in a QSO with somebody
else now shows beside the Auto button instead of looking idle.
- Switching profile left the previous logbook's verdicts on screen. The
worked-index, chase-new and the frontend's cached verdicts are dropped
when the logbook changes.
FT decodes: distance column, a message addressed to you set whole in
green (the station you are calling keeps a tint — most of what it sends
goes to other people), badge order L / Wkd / WL, list cleared when the
RIG changes band.
Rotor: new world-map compass from EC1KD's design, with the Ultrabeam boom
and second lobe restored and the compact form preserved; the classic dial
is kept and Settings → Rotator chooses between them. Stop no longer
flickers on a rotor standing still — movement was inferred from a degree,
less than the jitter a controller reports at rest.
Measured against DXHunter on the same station at the same second: 18
decodes here against 27 there.
- The window was five minutes. PSK Reporter's uploaders batch their
reports, most of them every five, so a five-minute window catches
about one upload cycle per station. Ten, as DXHunter has always had
behind a label that says four.
- The history query ran once per target and only on the narrow feed.
It now runs in both scopes and again every five minutes while a
station is watched, which is the cadence the uploaders keep.
- It asked only what the target RECEIVED. Both directions now, so
"who is hearing him" starts full too.
- The suggested call offset looked for a run of empty slots and said
nothing when there was none — exactly the case it exists for: a
hundred decodes across a 2800 Hz passband leave no gap. Failing a
gap it names the quietest slot, ties to the higher offset, never
above the ceiling.
Chase new: the receiver squares now follow the radius that was asked
for (it was one fixed ring whatever the setting said, so raising it
bought nothing), and the panel says what the feed is doing rather than
leaving an empty list to speak for itself. A change of hunt empties it:
its rows are verdicts reached under the old rule and nothing re-judged
them. Its own band selection, because what a station CAN work and what
is worth watching tonight are different questions.
Six faults, all found on the air this evening and all in the same
feature. The decision trace added here is what found the first one:
one line per period, saying what was on the air and why each station
was refused.
- "worked" was read from the ENTITY's status, which means the country
is in the log on this band and mode. On 10 m, where most countries
are, twenty decodes out of twenty-one were refused as worked — the
watched DXpedition among them. The entity decides what is NEEDED;
the callsign's own slot decides whether calling it is a duplicate.
candidateOf() is split out and tested because one line was wrong for
weeks and nothing could catch it.
- A multi-answer line was read only up to its first message. MSHV
answers two stations in one transmission ("YV5ALI RR73; F4BPO
<HK0/PY8WW> -08") and the second half was a report to us: the engine
saw a station working somebody else and dropped the target at the
moment the DX was answering. The decodes panel already read every
segment.
- The slot after a QSO belongs to our own 73. Handing straight on to
the next station took it, switching the DX call mid-sequence, and
the frame that closes the contact never went out whole.
- A station CALLING US is answered whether or not the log wants
anything from it. It was refused for having nothing to gain, so a
QSO would end, two stations would call, and both were ignored.
- Callability was tested when a station was CHOSEN and never again
while it was held: one picked on its CQ that then answered another
caller went on being called for the whole seven attempts.
- A watched callsign now outranks every station that is not on the
list. Lifted one rung at a time it sat at the bottom with nothing
needed from it, and was never reached on a busy band — the opposite
of what putting it on the list means.
Halt is now a verdict: the station is set aside for the session rather
than released, and the chase list does not override it. The attempts
cap lets the over finish instead of cutting the call that counted it,
and a rest is a rest. Only what the decodes list is SHOWING can be
called — the panel publishes the callsigns it shows, so there is one
definition of "shown" and not two.
Reported from a real shack: JTDX decoding FT4 came through as Q65. A
Decode carries a one-character marker rather than a mode name, and the
forks do not agree on that one — so the character alone cannot answer,
and its wrong answer reached everything behind it: new mode, new slot,
the mode filter, all computed against a mode nobody was using.
The sending program's own Status settles it. It comes from that program,
names the mode in full, and is re-sent whenever it changes, so it knows
what is being decoded in a way one character never can. Only the
ambiguous marker consults it: the ones both forks agree on keep
answering from the table, Status or no Status, and with no Status at all
':' still reads as Q65 — WSJT-X's meaning, the older and commoner.
Reported on an FTDX101MP: the slider sprang back to 100 W. The console
was not wrong about the rig — yaesuMaxPower already answered 200 for
that model, and the slider was drawn to it. The SET path carried its own
hard-coded 100, so asking for 200 W sent PC100, the radio obeyed, and
the next poll read back what had actually been set.
One ceiling now, the one the console draws to, so the two cannot say
different things. Pinned with the model list, including the unknown-rig
case: crediting a radio with power it does not have would be commands it
NAKs, so silence still means 100.
HAMLOG.online no longer issues API keys, and its upload API takes
nothing else. An operator without a key cannot obtain one, so the
auto-upload switch, the on-close sweep and the 'Send to' entry were all
arming something that could only fail — silently, once per QSO.
Closed at the source rather than hidden in the UI: the upload returns a
sentinel that says why, the manager stops routing to it and says so once
a session, and the manual path refuses with the same words. The settings
page states it plainly instead of showing a switch that does nothing.
Nothing else goes. Their confirmations arrive as an ADIF FILE and never
needed a key, so that import stays; the sent/received state already in
operators' logs stays readable, filterable and bulk-editable; and the
upload itself is kept whole as uploadHamlogLive, still covered by its
request-shape tests, against the day keys come back.
Reported with real callsigns: every Asiatic Russia contact logged CQ 17
/ ITU 30, whatever the operator's real zone. RU0LL and RA0FF are 19/34,
UA0SDX is 18/32, and QRZ.com had all three right.
Measured before touching anything: cty.dat answers 17/30 for RU0, RA0,
UA0 and UA9 alike — one representative pair for a country eight CQ zones
wide — while ClubLog's prefix table gives 19, 19, 18 and 17. The
reporter's instinct that no UA0 sits in CQ 17 was exactly right.
fillFromDXCC overrode the callbook's zones on purpose, and the reason
holds only for the country: QRZ returns the political nation where
cty.dat returns the DXCC entity. A zone answers a different question —
not what the callsign IS but where the station SITS — and there the
per-station page beats a country default. Zones now FILL rather than
override; the entity is untouched.
The cache made it worse by remembering our conclusion as though the page
had said it, so the wrong zones would have outlived this fix. A lookup
is now cached as the callbook returned it and the country file is
applied on read, which also lets a cty.dat update reach old rows.
Reported from a real import: every ZK2 contact came back New Zealand and
Niue vanished from a DXCC that had it confirmed. cty.dat is not wrong,
it is CURRENT — Niue moved to E6, so ZK2 reverted to New Zealand there.
ZK1 loses the Cook Islands the same way, and the reporter was right to
suspect more.
ClubLog's prefix table is date-ranged and still knows both, which is the
whole reason for enabling its country file. We consulted it only for
callsigns that already HAD a per-callsign exception — so a ZK2 with no
exception never reached it. It is now asked whenever no exception covers
the QSO's date.
Two limits keep the blast radius honest. It never overrules an exact
'=CALLSIGN' entry in cty.dat — that is somebody having looked at this
very callsign, and a prefix rule does not overrule it, which is why
Match now says how it matched. And where ClubLog has no answer (E6, TO5A
and their like are absent from its prefix table) cty.dat still decides,
because silence is not an answer. Measured before changing: on a sample
of thirty calls the two files agreed on twenty-eight, and both
disagreements were this bug. Opens 0.27.11.
A K3NG controller answered PuTTY perfectly and told OpsLog 'no reply to
C'. The reason is not the protocol: the client opened and CLOSED the
serial port for every single command, and an Arduino-based controller
resets when its port is opened — DTR pulses the reset pin. OpsLog was
rebooting it several times a second, and every command it sent landed in
a bootloader.
The port is opened once and held, per COM port, at package level: the
callers build a fresh Client per poll, so the port has to outlive them,
and a serial port is a single-owner resource in any case. A newly opened
port is given two seconds to boot before the first command, bytes left
from a previous exchange are drained rather than read as this command's
answer, and a failed exchange drops the port so the next starts from a
clean open instead of repeating the same silence.
Reply parsing was already right for both flavours and now has the real
strings to prove it, that controller's '+0140' among them.
From a TS-590SG report: the voice keyer played through the rig's USB
codec and the radio transmitted silence. Its manual says why — 'TX P1,
0: SEND (normal transmission using the MIC input), 1: DATA SEND
(ACC2/USB input)' — and OpsLog only ever sent the bare TX, so the radio
dutifully opened a front microphone nobody was speaking into.
An option on the audio page, shown for CAT keying, says where the
keyer's audio actually arrives; the manager routes it to a backend that
draws the distinction and falls back to the ordinary key for every rig
where one PTT is all there is. Test PTT goes down the same path, so it
tests what will happen rather than something adjacent.
From an IC-7300 report, four faults and one addition.
USB and LSB could not be commanded at all: modeCode knew 'SSB' — which
resolves the sideband from the band — and answered 'unsupported mode' to
the sideband names themselves. So an operator wanting USB on 40 m had no
way to say it, from the console or from anywhere else. They are separate
buttons now, and a rig reporting the folded ADIF 'SSB' still lights the
side its frequency implies.
The console offered controls the radio does not have: ANT1/ANT2 on a rig
with one socket, and a PSK button every non-7610-class Icom NAKs. Both
now follow the model, as the band buttons and attenuator steps already
did. Mic gain stops being phone-only — on USB-D it still sets what the
radio transmits at, so an operator who lives in FT8 had none.
CI-V address 0x00 was refused by a 'n > 0' test and silently replaced by
the IC-7610 default; an EMPTY setting is what means unconfigured, so the
parse error decides now, not the value. Plus the 60 m band button that
was missing.
One row per digital mode would be the honest layout, and there is no
height for it: the matrix sits in a fixed panel beside a dozen widgets.
So the row keeps its place and changes what it answers — DIG, then each
digital mode the operator's own list holds, in the order they put them
in, then back to DIG.
It costs no round trip. The query behind the matrix already grouped by
band AND mode; only the collapse to a class threw that away, so the same
cell is now published under the raw mode name too. Digital only: PH and
CW have nothing to cycle through.
On a specific mode the you-are-here mark follows THAT mode, or every FT4
entry would light whichever digital row the rotation happened to rest
on. A four-letter mode drops to 9px rather than widen a column sized for
three characters and push the whole matrix sideways. Opens 0.27.8.
The panadapter has finite room: spots close in frequency are stacked
behind a '+' and only one is drawn, chosen by PRIORITY — a parameter
'spot add' accepts and OpsLog never sent. So a new entity sat invisible
behind three stations already in the log. DXHunter has sent it for
years; the tiers here are the same idea in the operator's own words:
the entity never worked (with my own callsign, for a multi-op), then
band/mode/slot, then the reference hunts, then everything else.
And a callsign already worked on this exact band and mode stops
advertising a need. Working it again cannot turn a missing QSL into a
confirmation — the QSO is already there — so shouting NEW DXCC over a
station worked an hour ago only teaches an operator to distrust the
colour. The need is real and stays on every OTHER station of the entity,
which is where it can be answered. Applied on both paths out of the
verdict, including the early one that leaves the loop first.
HAMLOG.online was wired into all three when it arrived; HamQTH shipped
with only its uploader and its editor row, so the log could not be asked
'which contacts have never gone there' — the question that precedes
every backlog upload — and a log uploaded to HamQTH by hand could not be
marked, leaving OpsLog offering to send every one of those contacts
again. Sent side only, both whitelists, both panels, two hidden-by-
default columns.
The per-QSO API is the only correct way to send a SELECTION, and at the
pace it must be driven a 14k backlog costs the better part of an hour.
HamQTH's other endpoint takes a whole log as one file — and REPLACES
what is on the site with it: its documentation says plainly that partial
uploads do not exist. So it is offered as its own deliberate act behind
a confirmation, never as the batch path behind 'send these', where it
would delete every QSO the operator had not selected.
Scoped to the callsign this profile uploads as, so a database holding
two operators' contacts cannot push one into the other's log; tar.gz
above 12 MB because the ceiling is 20 and a six-figure log passes it as
text; and every QSO not already stamped is marked sent afterwards, in
bulk, so the backlog list agrees with reality.
A DXpeditions tab holding the two feeds the DX world announces itself
on: NG3K's ADXO (structured — dates, entity, calls, bands, modes, QSL
route) and DX-World's headlines. What a logger can say that a news
reader cannot is whether the operation is worth chasing, so every
announcement is put through the SAME verdict the cluster paints on a
spot — one badge, strongest wins, dimmed when the need is only a missing
QSL — with an 'only what I need' filter. One click watches every
callsign of an operation; the news headlines are mined for callsigns so
they can be watched the same way.
Parsers ported from DXHunter's and pinned with table tests against real
feed text: the 'as PJ2/W2APF' mining, the DXCC-prefix-first
normalisation without which no spot ever matches, both ADXO date forms,
and the '160-6m' span whose unit is written once (DXHunter read that as
6m alone and lost the low end).
Watchlist membership now announces itself app-wide, on the same card as
a new version: the bindings emit watchlist:changed, so a call added from
the cluster or this tab is confirmed where the operator is actually
looking — the panel's own inline message never was.
TQSL validates MY_CNTY against the ADIF secondary-subdivision list,
which is the US county enumeration — 'XX,County' with a two-letter
state. A Canadian profile produced 'ONTARIO,Kawartha' (the export joined
MY_STATE onto the county wholesale) and TQSL refused the whole record.
Two layers: adifCounty only prefixes a two-letter state, so exports stop
manufacturing the invalid shape; and UploadLoTW scrubs any MY_CNTY that
is not the US shape before signing — MY_STATE and MY_GRIDSQUARE already
locate the station for LoTW, and the US form survives for the county
hunters. Table-tested.
qso_realtime.php with the account's callbook credentials (which the
external-services config falls back to when its own are blank), one ADIF
record per QSO, prg=OpsLog. HTTP status IS the answer: 200 saved, 400
rejected (a duplicate counts as delivered, like HRDLog's insert 0), 403
credentials. Sent-state lives in APP_OPSLOG_HAMQTH_SENT extras like
HAMLOG.online — ADIF names no HamQTH field. Auto-upload on log, on-close
batch, right-click Send to, QSL Manager backlog, and a Test button that
authenticates against the callbook login, which cannot touch the log.
Fixes a real mis-route on the way: manual 'Send to HAMLOG.online' had no
branch in runManualUpload and fell through to QRZ.com — the selection was
uploaded to the wrong service with the QRZ key. Both extras-stamped
services now have their own branch.
The 0031 clublog ALTER hit split settings databases (their qso table
moved to the logbook years of QSOs ago) and the whole open failed —
silently, because the error went to a println the GUI subsystem
discards. The app then ran with no settings store: every panel showed
defaults, 'db not initialized' in Preferences, and operators read it as
their database being lost. Nothing was ever touched: the failed
migration rolled back on every attempt.
The SQLite migration path now tolerates what the MySQL path always has —
plus the one case it never meets: ALTER/CREATE INDEX/DROP on a table
this database legitimately does not hold. And a failed open is written
to the rotating log, where the next such morning can actually be
diagnosed.
Two new QSO columns, clublog_qso_download_status/date — a Club Log MATCH,
the service's own confirmation (both stations uploaded the QSO, paired
within 15 minutes). Full promoted-column lockstep: migration 0031, repo
insert/scan, ADIF dictionary + import + export (app-defined
CLUBLOG_QSO_DOWNLOAD_*), table columns, filter builder, bulk edit and the
QSO editor's Club Log row.
The QSL Manager's Club Log entry now actually downloads: getmatches.php
with the existing account settings and the embedded application key,
incremental via the match-completion date filter, matched call+band+mode
±15 min with a mode-blind fallback because Club Log reports 'false' for
modes it cannot infer. Matches always exist on both sides, so unmatched
ones are listed rather than skeleton-added.
And Super Check Partial can merge Club Log's weekly SCP list (~180k calls
worked on the air in the last 3 years) with MASTER.SCP — an opt-in
checkbox under the SCP setting.
The gap between worked and confirmed becomes visible everywhere. A Chase
setting on the DX Cluster page picks the mode; in new-plus-unconfirmed the
verdicts for DXCC/band/mode/slot, prefix, county and state are judged against
CONFIRMED-only ledgers built from the operator's chosen sources (LoTW, card,
eQSL, QRZ.com — HRDLog has no confirmation field in ADIF to offer), and a
need that exists only because a QSL never arrived is flagged Unconf: the
cluster and decode badges render it dimmed, the convention the grid hunt
introduced. The grid's own Chase selector folds into the global one; its
square-matching scope stays where it was, being grid-specific. One snapshot
key change rebuilds the cache when any of it flips.
The WAS gap made visible: a worked-states set joins the cluster status cache
(distinct states over the three US entities), the status entries carry a
NewState flag wherever the state resolves (log county first, ULS licence
second), and the decode panel gains the badge in its status column plus the
filter chip alongside NEW/BAND/MODE/GRID. Colour from the shared marker
palette, so the cluster can adopt it later without a second hue.
Three faults, one report. The slow poll asks ^TP — the KPA1500's ATU, which
a KPA500 (no ATU) never answers — and ask() dropped the whole connection on
any read timeout: a two-second stall and a reconnect every slow cycle, which
is why buttons lagged and the status read wrong. Worse, every serial reopen
toggled DTR/RTS — and those lines are the KPA500's POWER SWITCH (that is how
the Elecraft utility turns it on), so the amplifier obediently switched off
twenty seconds after its operator pressed nothing but Standby.
Silence is no longer a dead link (write errors still are), ^TP is never asked
again after one silence, the control lines are asserted once and held, and
the baud field becomes a list of the rates these amplifiers actually speak.
A connect that lasts 50 ms leaves nothing to say which answer the client
disliked — WSJT-X refusing to attach to the shared CAT was undiagnosable
without the full wire trace. The handshake is now always logged; steady-state
polling stays behind the trace switch.
Configure (message 15), mode field only, every other field sent as
no-change: an FT4 spot clicked while WSJT-X sits in FT8 lands the operator
ready to decode instead of staring at gibberish. Sent to every instance
heard this session — one already in the right mode treats it as a no-op —
and only for modes the decoder actually speaks (FT8/FT4/JT65/JT9/MSK144/
Q65/FST4); CW and SSB are none of its business. Toggle in the Connections
panel, on by default.
Message 13 paints callsigns in WSJT-X/JTDX's own Band Activity window with
verdicts from the same cluster status cache that colours the spot grid:
watchlist pink, new DXCC green, new band for its entity orange. Deduplicated
per instance+call+verdict, one datagram each; a verdict that lapses (the
operator worked them) clears that call, and turning the option off clears
everything via the protocol's CLEARALL!. Off by default, switch in the
Connections panel.
Message 7 asks a program heard for the first time this session to replay the
decodes already on its screen, so the FT decodes panel starts full instead of
empty until the next period. Replayed lines arrive marked not-new and are
shown but never auto-answered — the auto-caller now checks, on top of its
30-second freshness gate.
The operator measured the whole table: 10 W showed 83, 12 W showed 100, 13 W
showed 8 — the bargraph is relative to a meter RANGE that flips at 12 W
(0-12 QRP, 0-120 above). A bar percentage was never watts; with the PC
setting choosing the range, it converts, and the console prints the watts
beside the bar.
One placeholder per id in a single IN (…) hits SQLite's bound-variable cap:
bulk field set died at 168 000 QSOs with 'too many SQL variables' (10 000
passed). One chunker now serves bulk set (text/int/extra/frequency), the
delete, the post-upload markers and the export-selection iterator — the last
collecting and sorting once at the end so its chronological contract holds
across chunks. 500 ids a statement keeps every backend far from any limit.
Tried on the real IC-7760: the magic packet wakes nothing; Icom's own
mechanism is the network-standby session plus the CI-V power-on, which
OpsLog already does. The MAC store and the WOL sender go, and the changelog
entry with them. The CI-V pump now says once per session that the client
pings are armed — invisible pings read as absent pings.
wfview sends a ping (0x07, 0x15 bytes, its own seq and a monotonic
timestamp) every 500 ms on every stream, and so does RS-BA1. OpsLog only
ever REPLIED to the rig's pings — and the loaner IC-7760 stopped serving
CI-V data about a minute into nearly every session while the transport
stayed alive: the rig had concluded nobody was listening. Scope, TX audio
and idle numbering were each eliminated in turn before wfview's source
settled it. Pings now go out on control, CI-V and audio alike.
A 7760 switched fully off takes its LAN server down, and no session means no
console and no ON button — the one thing remote operation cannot tolerate.
The rig's MAC is learned from every login and persisted; when a dial finds
nobody home, the magic packet goes out to it before the next attempt. The
rig wakes into standby, the session opens, and the ON button does the rest.
The generic Freq write lands on the TX VFO when split is engaged: an FT-2000
moved B and left A — the receiver — behind, so a spot click QSYed the
transmitter and nothing audible changed; without split the same write moved A.
With split on (and the operator on MAIN), FreqA and FreqB are both written,
so the radio arrives on the spot whole, split left as the operator had it.
The inference tables knew FT8 on some bands and nothing on others: a 10.136
spot with a bare comment read as generic DATA — which is what every
skimmerless spot of a DXpedition's 30 m FT8 slot did. The standard FT8/FT4
windows are added on 30 m, 60 m, 80 m (FT4), 17 m (FT4) and 12 m, in BOTH
tables (backend band plan and frontend spot.ts), ahead of the wide segments
they sit inside — order is the mechanism there.
Every idle went out with seq 0, seven a second, interleaved with
properly-numbered data — where RS-BA1 and wfview draw idle sequence numbers
from the same counter as everything else. A rig that follows the sequence
tolerates the zeros for a minute or so and then stops serving CI-V data on
the stream: the shape of every dropout the loaner IC-7760 has shown, with the
scope and the TX path both since eliminated as causes. Idles now take the
next tracked seq and sit in the retransmit buffer like any other packet.
The 0x26 01 copy was fire-and-forget, and a real 7760's sub VFO kept
yesterday's mode with nothing to show why — refused, or sent with a stale
mode byte. The mode is read first when unknown, and both outcomes are
logged.
rouggy