- SCP/N+1: new internal/scp downloads the community MASTER.SCP master list and a
docked two-column widget shows, as you type a call, the known calls containing it
(Partial) and the calls one edit away (N+1) — click to fix a busted call. Opt-in
in Settings → General; top-bar toggle; queried debounced on callsign input.
- Flex: OpsLog's GUI-client detection was too loose and could bind to "SmartSDR CAT"
(or DAX) — both carry "smartsdr" in the program name — instead of the real GUI
client, making SmartSDR CAT drop and reconnect in a loop while OpsLog was open.
Now it binds only to a real SmartSDR/Maestro GUI client (e.g. a FLEX-8600M's
integrated screen) and excludes cat/dax; dropped the risky empty-program fallback.
- Telemetry: on a fresh install the callsign isn't set at launch, so the once-a-day
heartbeat recorded the machine UUID. Now it waits (~10 min) for the operator to
enter their callsign before sending, falling back to the UUID only if none appears.
With ESM enabled (Settings → CW Keyer), the keyer active and mode CW, Enter in
the entry strip fires a macro by QSO stage instead of logging:
- callsign field empty → F1 (CQ)
- callsign entered (in call field) → F2 (report), then focus jumps to RST-sent
- Enter in RST-sent / RST-rcvd → F3 (TU), which logs via its own <LOGQSO>
Works for every keyer engine (WinKeyer / serial DTR-RTS / Flex CWX / Icom CI-V)
since it routes through the shared macro sender. Enter in other fields still logs
normally, and ESM off keeps the classic Enter-to-log behaviour.
Backend: new `esm` flag on WinkeyerSettings (winkeyer.esm). Frontend: esmHandleEnter
state machine keyed off data-esm markers on the call/RST blocks, a Settings
checkbox + hint, and i18n EN/FR.
Push the tuner control further so it mirrors the native 4O3A app and the way the
PowerGenius XL is surfaced.
Backend (internal/tunergenius):
- Status now carries both RF channels A and B (source/mode, band, frequency,
bound Flex nickname, per-channel bypass, antenna, PTT), the active channel,
the C1/L/C2 relay-network positions, and the 3-way-vs-SO2R hardware variant
(learned once from the `info` reply). Flat freq/antenna still mirror the active
channel for the compact widget.
- New TunerGeniusActivate(ch) binding → `activate ch=N` (or `ant=N` on 3-way).
Frontend:
- New shared TunerCard, styled exactly like AmpCard (PWR/SWR meter bars,
A/B channel selector with source+freq+antenna, Tune/Bypass/Operate). Used in
BOTH the FlexRadio panel (its own card, like the PGXL) and Station Control.
- Docked TunerGeniusPanel widget now shows the two channels A/B with their
source/frequency/antenna and lets you click to make one active — the missing
A/B state the user flagged.
- i18n EN/FR for the new labels (channels, antenna, in-line/bypassed, title).
Still UNTESTED on hardware — verify the per-channel field names/units and the
activate behaviour on the real box.
New internal/tunergenius client speaking the same "Genius Series" text API
as the Antenna Genius / PowerGenius XL: banner on connect (with optional
"AUTH" for remote access), "C<seq>|<cmd>\n" commands, "R<seq>|<code>|<msg>"
replies and the "S<seq>|status k=v …" snapshot; async "M|<msg>" info lines
are consumed inline. Polls status ~1.5s and exposes SWR (return-loss dB
converted to a VSWR ratio), forward power (dBm→W), and the operate/bypass/
tuning/active-channel state. Actions: autotune, global bypass, operate/standby.
Controlled directly (not via the radio) so OpsLog uses only one of the box's
four connection slots, per the device's protocol doc.
Wiring:
- app.go: tunergenius.* settings keys, Get/Save/start, GetTunerGeniusStatus,
TunerGeniusAutotune/SetBypass/SetOperate; started in the background at launch.
- Settings → Tuner Genius panel (enable + IP + optional remote code).
- Docked TunerGeniusPanel widget (SWR/power readouts + Tune/Bypass/Operate),
top-bar toggle, shown when enabled — mirrors the Antenna Genius widget.
- i18n EN/FR (sec.tunergenius, tg2.*, tgp.*).
Command verbs (operate/bypass/autotune/status/auth) come straight from the
4O3A "Tuner Genius XL — Protocol Description"; UNTESTED on hardware.
Design flaw: opslog.db held BOTH the config (settings + profiles) AND the SQLite
logbook, so the only way to a separate SQLite logbook — the whole-app "change
database location" pointer — swapped the config too, wiping the operator's setup
(reported: creating a new SQLite for a visiting op lost all profiles/settings).
Now the two are separate files:
- Settings database: settings + profiles. Fresh installs name it settings.db;
existing installs keep opslog.db.
- Logbook (QSOs): a dedicated logbook.db next to the settings db, or a
per-profile file (profile.ProfileDB.Path), or MySQL. connectLogbook opens the
logbook file (db.Open creates+migrates on first use); the settings db is used
as the logbook only if the split ever fails.
One-time, non-destructive migration at startup: if there's no logbook file yet
but the settings db already holds QSOs (legacy combined opslog.db), seed
logbook.db with a clean copy via VACUUM INTO — contacts move to the logbook, the
originals stay in the settings db as an untouched backup.
UI: the Database panel now shows the settings database and this profile's logbook
as two clearly labelled sections (+ "Open folder"), and the logbook selector is
SQLite (default logbook.db, or a dedicated file via "Choose a dedicated file…")
vs MySQL — no more confusing shared/separate choice. New binding RevealDataFolder.
Design flaw: the SQLite backend conflated the app/config database (opslog.db —
settings + profiles) with the QSO logbook. connectLogbook returned a.db for any
non-MySQL profile, so the ONLY way to get a separate SQLite logbook was the
whole-app "change database location" pointer — which swapped config + profiles
too, wiping the operator's setup (reported: creating Jerem.db lost all configs).
profile.ProfileDB gains a Path field: a non-empty path routes that profile's
logbook to its own SQLite file (db.Open creates + migrates it on first use),
while opslog.db keeps settings/profiles. connectLogbook opens the file; empty
path = shared db (unchanged default, backward compatible). MySQLSettings carries
sqlite_path; Get/Save wire it through.
UI: the Database panel gains a third backend option "SQLite — separate file"
with a file picker, and now clearly labels the shared application database
(settings + profiles) vs this profile's logbook, so the two are never confused.
A SteppIR only covers part of the spectrum (a standard one is 20 m–6 m) but
can't report its own range, so the follow loop's existing out-of-range guard
(FreqMin/FreqMax) never engaged for it. Tuning the rig to a band the antenna
can't reach (e.g. 30 m) made the loop keep trying — the immediate cause of the
stuck TX interlock addressed in the previous commit.
Add a Tunable range (MHz) setting to the Antenna panel, wired into the SteppIR
adapter's Status().FreqMin/FreqMax so the follow loop skips out-of-range
frequencies entirely: no tune command, no TX inhibit. Defaults to 13–54 MHz
(20 m–6 m, the common model) when unset; widen the low edge for a 40 m-equipped
SteppIR. Ultrabeam is unaffected (it reports its own per-band coverage).
Keeps the last-commanded-freq deadband from the previous commit as a universal
safety net for any flaky-status case within the valid range.
Opt-in (Settings → General). Shows a "MW #rank" pill next to the DXCC entity
name in the entry-strip band/slot matrix — ClubLog's Most Wanted ranking
(1 = most wanted), personalised to the operator's callsign and refreshed daily.
- internal/clublog/mostwanted.go: fetch mostwanted.php?api=1&callsign=<CALL>
(rank→DXCC JSON, real User-Agent), invert to dxcc→rank, cache to
<dataDir>/clublog_mostwanted.json; NeedsRefresh invalidates on callsign change.
- app.go: keyClublogMostWanted setting, a.clublogMW, startup refresh goroutine,
activeCallsign() helper, and Get/Set/Download bindings mirroring the cty ones.
WorkedBefore now carries MWRank (qso.WorkedBefore.MWRank) when enabled.
- BandSlotGrid.tsx: MW pill next to the entity name, colour-tiered by rank.
- SettingsModal General: toggle + download button + status, mirroring the
ClubLog cty-exceptions block.
Also reorganises the changelog: the theme-persistence fix (landed after the
v0.20.11 tag) plus this feature go under a new 0.20.12 entry; 0.20.11 keeps only
what shipped in its binary.
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.
Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
The station-control code rebuilt a fresh driver on every status poll and every
relay set. Stateful boards (Denkovi FTDI D2XX, USB-serial) hold an OS handle only
one opener can own, so the first poll opened the board and leaked the handle, and
every poll after failed with 'device in use' — the relays greyed out a second
after Save and auto-control never switched. Drivers are now cached per device and
reused, closed on config change. Adds a Test-connection button + detect feedback
in the device editor (reported by VK4MA).
Embeds changelog.json (per-version EN + FR notes, curated from the release's
commits). GetWhatsNew compares the stored last-seen version with the running
build and returns the notes for every newer version, once, then advances the
marker. A dialog shows them in the UI language on the first launch after update.
Seeded with the 0.20.5 notes.
Day/Week/Month/Year now show the anchor day hour-by-hour, the last 7 days, the
last 30 days, and the last 12 months — anchored to the period end (else now), in
real date order. Replaces the cyclical hour-of-day/weekday/day-of-month/month
buckets, which left future days empty and ordered the weekend after Monday.
Backend adds cyclical distributions ByHour (hour-of-day), ByDOW (weekday), ByDOM
(day-of-month) and ByMonthYr (calendar month), all UTC. The Activity-over-time
card gains a selector: Timeline keeps the chronological month trend; Day/Week/
Month/Year show the hour/weekday/day/month distribution as bars.
Adds Stats.ByBandCategory (per band: CW/phone/data counts, band-plan order) via a
modeCategory() bucketing in stats.go, and a StackedBandBars chart in the Stats
panel showing the split per band with a legend.
Implements the SPE Application Programmer's Guide protocol: packets
0x55 0x55 0x55|CNT|DATA|CHK (sum%256), OPERATE key 0x0D (toggles STANDBY/OPERATE)
and STATUS request 0x90 whose 0xAA-framed reply is a 19-field CSV (mode, RX/TX,
band, power level, output W, SWR, V/I, temp, warnings, alarms). internal/spe
polls status ~1/s over USB serial (go.bug.st/serial, 8N1) or TCP (RS232-to-
Ethernet bridge) — same codec, different transport.
Wired via startPGXL (starts the SPE client for spe* types), bindings GetSPEStatus
/ SPESetOperate, and a live status card + OPERATE/STANDBY toggle in the Amplifier
settings panel. Only the two example-anchored commands are sent (safe); other
keystroke codes were ambiguous in the guide's table. Untested on hardware.
Renames the Hardware section to Amplifier and adds an amplifier-type selector
(4O3A PowerGenius XL, SPE Expert 1.3K-FA / 1.5K-FA / 2K-FA) plus a transport
choice for the SPE amps: USB (serial COM + baud) or Network (RS232-to-Ethernet
IP:port). PGXLSettings gains Type/Transport/ComPort/Baud (keys keep the pgxl.*
prefix for back-compat). PowerGenius still drives over TCP; SPE settings are
stored but control is not wired yet (needs the SPE serial protocol).
- Denkovi (FT245 D2XX) now selectable as 4 or 8 relays (a 4-relay board just uses
the low nibble); NewDenkovi takes a count, driven by the device's Channels.
- New 'usbrelay' backend: cheap CH340/LCUS USB-serial boards over a COM port
using the common A0 protocol ([0xA0][relay][state][checksum]); write-only, so
Status is a shadow. Channel count configurable (1/2/4/8/16).
- StationDevice gains Channels; deviceRelayCount() drives label/relay counts for
the variable-size types. Device editor: channel selector + COM-port picker
(usbrelay) / FTDI-serial (denkovi).
Both untested on hardware; the A0 command set / Denkovi bit order may need a tweak
after a live test.
Award refs are now computed once and stored on the QSO as a JSON column
(award_refs, e.g. {"DDFM":"74","WAJA":"12"}) instead of recomputing the whole
award engine on every grid page load. Written on log/edit/UDP-import and
bulk-recomputed when an award definition or reference list changes; a one-time
per-logbook backfill materializes pre-existing QSOs. The grid reads the column
directly like any other field, so it's fast and available everywhere (including
the shared MySQL logbook).
Also fix per-profile grid column layout: the DB copy was already per-profile,
but the localStorage cache used one global namespace and shadowed it, so a
profile switch kept the previous profile's columns/widths. gridPrefs now scopes
the cache by active profile id and the grids remount on profile:changed.
GetQSORate now returns both the active operator's rate (their own performance)
and the whole station's rate (all operators combined). RecentRateBreakdown
computes both in one scan of the recent rows (per-operator + all-operators),
replacing RecentRate.
ON AIR badge (bottom status bar, shown when live-status publishing is on): a
blinking red light + "On air" when a QSO was logged in the last 5 min, dim
"Offline" otherwise. Seeded at launch from LiveLastQSOAgeSec so it's right
immediately, flips online on qso:logged, expires via a 10s tick.
Auto-updater UI: the update check now also runs every 10 minutes, and the
update notification downloads and installs in-app — a live progress bar
(update:progress) then OpsLog restarts on the new build. Falls back to opening
the release page when there's no auto-download asset or on error (retry).
Regenerated bindings for DownloadAndApplyUpdate / LiveLastQSOAgeSec.
Automatically switches the Station Control relay boards from the rig's
current frequency / band. Each relay carries one rule: off (manual), a
frequency window (ON inside [lo,hi] kHz, OFF outside), or a set of bands
(ON on those bands, OFF elsewhere). Evaluated on every CAT frequency/band
change; a relay is only switched when its desired state actually changed,
so tuning within a range doesn't hammer the board.
A cached atomic flag keeps the CAT hot path a no-op when the feature is off
(important during FT8 slice churn). Saving re-applies from the live
frequency so a changed rule takes effect immediately.
New Settings → Hardware → Relay auto-control section: master enable plus a
per-relay mode (Off / Frequency / Band) with kHz range inputs or band
chips, per configured relay board. i18n EN + FR. Azimuth/Time modes (the
other two PstRotator tabs) are left for later.
Watches a configurable list of external ADIF files (fldigi RTTY logbook,
N1MM, VarAC…) and imports newly appended QSOs automatically. Each record
goes through the existing UDP-log path, so it gets full enrichment, ±2-minute
dedup (shared udpLogMu, can't race the UDP auto-log) and automatic upload to
the configured external services — no per-file toggles like Log4OM.
A newly added file starts at its current size (offset -1 sentinel → size on
first scan), so the QSOs already in it are NOT bulk-imported; only contacts
logged after it was added come in. Reads only up to the last complete <eor>
so a half-written record waits. Handles truncation/rotation (re-reads from 0,
dedup protects) and persists per-file offsets without clobbering a concurrent
UI edit of the file list.
New Settings → ADIF monitor section: master enable + add/remove/toggle files.
Backend emits adifmon:imported → the grid refreshes and a toast reports the
count. i18n EN + FR.
rouggy