Reported from a multi-monitor station: window.json held x=-7680 and the
window opened where nobody could see it, with no way back short of
editing the file — which nobody knows to do.
The guard existed but asked the wrong question. It tested the position
against the VIRTUAL SCREEN, the rectangle spanning every monitor, and
monitors rarely tile that rectangle: a wide screen beside a tall one, or
one mounted higher, leaves gaps inside the box that belong to no monitor.
A window in a gap passes a bounding-box test and is invisible. The test
now walks the monitors themselves, through EnumDisplayMonitors, and uses
each one's WORK area — a title bar under the taskbar cannot be dragged
either.
A position that is genuinely lost is now MOVED onto the nearest monitor,
keeping the window's size. Handing it back to Windows lost the size too
and dropped the window on the primary screen wherever Windows chose.
The arithmetic is in screenclamp.go with no Win32 in it, and tested
against the reporter's four-monitor layout and against a gap between two:
this fault is invisible by definition and cannot be reproduced without
the reporter's screens, so a table test is the only place it can be held.
The layout is also logged at every start, since the first question after
'OpsLog does not open' is what the screens looked like.
Two things reported together, both about a list that fights back.
The GRID froze nothing: every spot landed at the top and pushed the rest
down, so a few rows in, the callsign under the pointer had moved by the
time the click arrived. It now stops redrawing as soon as it is scrolled
away from the top and says how many spots are waiting; reaching the top
again, or clicking the notice, releases it. The arrivals are counted by
finding the frozen top row in the live list rather than by comparing
lengths — the list is a ring buffer, so once it is full a length
comparison would report nothing new for the rest of the evening.
The COMMAND BUTTONS were capped at 120 characters. A DXSpider filter
naming the prefixes an operator wants runs well past that, and the field
just stopped accepting keystrokes: the command was saved truncated with
nothing to say why. 500 now, with the full text in the tooltip since the
box cannot show it.
The transmit meters were read on k.tx, which records only that OpsLog
keyed the radio. An operator using the front-panel PTT, a footswitch or
the mic button therefore had a panel that believed the rig was receiving
— and since the power and SWR bars are read only while transmitting,
they were never read at all. IF carries the radio's own transmit bit;
that is what decides now.
The meter probe logs RAW answers rather than parsed numbers, and asks a
wider set (SM, SMH, BG, SW, PO, TQ). A command answering in a shape we
did not expect is the interesting case, and parsing hid it behind the
same dash as a command the radio refused — which is what still stands
between us and a working SWR reading on a K3.
FT8 decodes made on 14.095 were labelled 2190 m. That band is 135.7-137.8
kHz, and every affected decode's audio offset plus 136.1 kHz lands inside
it — while the ones shown with no band at all land just above 137.8. The
decodes were being stamped with another instance's dial.
WSJT-X refuses to start a second instance without --rig-name, so its ids
differ and keying on the id worked. MSHV has no such rule: both copies
call themselves 'MSHV', so the LF instance's Status overwrote the HF
one's dial, T/R period and mode.
Instances are now identified by their sending socket as well as their
name — the socket is stable for as long as the program runs, which is
exactly the lifetime this has to hold over. A second application claiming
an id already in use is shown as 'MSHV #2' and says so in the log, so the
decodes panel can still split them.
This also fixes replies: a Reply was addressed to whichever copy sent
Status last, which on a two-instance station is a coin toss.
A station new on this band AND in this mode is one status, 'new-band-mode',
and the badge table has an entry for neither half. The lookup returned
nothing, so those rows showed only their grid or prefix badge — and with
NEW/BAND/MODE selected, a row whose visible badges were LOC and PFX read
as the filter letting through things nobody asked for. It was not: the
row belonged there and the panel failed to say why.
catsOf has always split that status into its two categories for filtering.
The badges now do the same on screen.
Both are the same bug. ReadState returns early while transmitting — the
rig answers '?;' to IF; then, and treating that as a fault used to drop
the link — but that early return also skipped the panel update and the
meter read.
So the panel believed the radio was still receiving. Pressing MOX again
therefore sent ANOTHER transmit command instead of RX, and the K3 stayed
keyed, exactly as reported. And the power and SWR bars were only ever
read at the one moment they mean nothing.
Reading meters while transmitting needs one more guard: a '?;' then says
when the question was asked, not what the radio supports, so the
unsupported-command memory is suspended for that read. Without it, one
badly timed refusal would silence a meter for the rest of the session.
Adds RIT/XIT offset control (±10/±100 Hz, offset shown), a 4.0 kHz filter
button for FT8, and logs the K3's icon word when it changes: there is no
command for 'is the ATU in line', the reference says the switch functions
show up as icon changes, so an operator toggling the ATU while watching
the log will name the bit and the button can then light up honestly.
Dragging a four-pixel slider to change the power by five watts is a fussy
gesture, and the Flex and Yaesu consoles have had the wheel for a while —
an operator moving between them expects it.
React registers onWheel as PASSIVE, so preventDefault() there is ignored
and the panel scrolls under the pointer while the value changes; the
listener is attached natively instead, with the live values read through
refs. Both existing panels solved it the same way, so this is a third
copy turned into one shared component -- used by the new console only.
The other two are left alone deliberately: they work, they are in daily
use, and their styling differs in ways a merge would have to guess at.
Power steps 5 W a notch, matching the K3's own coarse step.
SWT20 was written from memory of the reference rather than from Table 7,
and 20 is not an ATU switch at all — it would have pressed something else
on a real K3. An operator read the table out for us: switch 19 is the ATU
row, TAP for a tuning cycle and HOLD for tuner in line or bypassed.
Adds the HOLD as its own ATU button, because on the radio they are two
different things: tuning is a cycle you start, bypassing is a state you
leave it in.
Power takes 0-110 W on an Elecraft, per the reference — a K3 makes a
little over its rated output — while a Kenwood keeps 200.
The list is a ring buffer that held a thousand spots, and on a busy
evening a thousand arrive in a couple of minutes. So the buffer decided
how long a spot lived, and the spot LIFETIME setting never got the chance
to expire anything: fifteen minutes meant nothing when the oldest spot
was pushed out after two.
Now settable (Preferences → Cluster, beside the lifetime, since between
them they decide the same thing), 100 to 10 000. The ceiling is a real
limit rather than a round number: every spot is matched against the
worked index and the alert rules, and is a row the cluster grid and every
open band map re-render.
Reading the cluster means running down dozens of lines, and a single
click did the whole job — QSY, mode, callsign — so every line looked at
dragged the radio with it. One stray click while reading took the
operator off the station they were working.
Looking and going are two different intentions, so they are two gestures
now. The band map is unchanged: clicking a spot there is already a
deliberate act, not a way of reading a list.
Reported from a real FTDX101, and each one is a different kind of wrong.
MIC GAIN was read and written through the 0-255 scale the audio gains
use, but the CAT reference gives MG000-100. A rig set to 80 therefore
showed 38, and moving the slider sent 204 — outside the range the radio
accepts, so it refused the command and the slider sprang back. That
snap-back was the symptom; the scale was the cause.
POWER was capped at 100 W by the slider, not by the radio. There is no
CAT command for 'how much power can you make', so the ceiling comes from
the model name, with the rig believed if it ever reports more than the
table expects — it has just proved what it can do.
NAR is the narrow IF filter, and on a rig that does not implement NA the
button showed a state the radio never gave and did nothing when pressed,
which reads as a fault in the radio. Now shown only when the rig answers,
with a tooltip saying what it is.
Also: the frequency readout steps the Hz digits under the wheel, not just
the kHz ones. Zero-beating a CW signal is a few tens of Hz and it was the
one move the display would not make. And the split chaser is CW-only —
its marker comes from a CW skimmer.
An operator reading a cluster page sees 28500 and wants to be there. The
hands are on the callsign field; reaching for the frequency box, or the
mouse, is the part that loses the station. So the call field takes a bare
number on Enter: kHz for a frequency, or a band on its own.
Ambiguity resolves to the band on purpose -- 40 is 40 m, not 40 kHz --
because neither of those kHz values is anywhere a radio tunes, and it
reads the way an operator says it. Anything with a letter in it is a
callsign and behaves exactly as before; a number that is neither a band
nor a plausible frequency does nothing at all.
Bands go through the ordinary band change, so the antennas, the per-band
power table and the outbound integrations hear about it as they would
from the dropdown. Also adds 4 m to the QSY table, so a band that can now
be typed is a band that has a frequency to go to.
It filled the window: on a wide screen a slider ended a hand's width from
its own label and the panel stopped reading as one instrument. Capped and
centred like the Yaesu, Icom and Flex consoles, grouped into Meters,
Levels and Receive cards, with the level sliders in two columns.
Also opens the 0.26.12 block: the TQSL logging and this console were
written after v0.26.11 was tagged.
So the tester can exercise everything in one session instead of one
control per build: RF and mic gain, squelch, preamp, attenuator, NB, NR,
AGC, filter width, antenna, RIT/XIT with a clear, and the keyer speed.
The analogue scales differ between an Elecraft and a Kenwood — RF gain
000-250, mic 000-060, squelch 000-029 against 0-255 — so each is mapped
through its own full scale and shown as a percentage. Using one rig's
range on the other silently halves or doubles every setting.
Antenna only appears when the radio answers AN: a K3 without the internal
ATU has one socket, and a switch that goes nowhere is worse than none.
The Elecraft backend already existed; what was missing was somewhere to
operate the radio from. This adds the panel, on the Kenwood-dialect
client the K3 already speaks, in a tab of its own beside the Yaesu and
Icom consoles.
Scope is the six controls asked for and nothing else. Every extra command
added without a radio to test it against is a control that may or may not
do what its label says, and a K3 exposes dozens.
No K3 was available while writing this, so the two halves are treated
differently. The setters are the commands the reference documents
unambiguously and whose effect is visible and reversible (PC, AG,
TX/RX). The meters are the opposite: their scaling differs by model and
firmware, so the raw answers are logged next to the power setting, the
panel says the scaling is provisional, and an unmeasured SWR shows as
'—' rather than as a perfect 1.0 — a good match on an antenna nobody
measured is the reading that costs a radio.
ATU tune sends SWT20 (the K3 front-panel tap) and logs exactly what it
sent, so a wrong mapping names itself instead of leaving an operator
guessing which button OpsLog pressed.
'No QSOs processed' (exit 8) covers already-uploaded, out-of-certificate-
date-range, and a station callsign that does not match the location being
signed with -- TQSL's message does not say which. An operator whose QSO
was refused and then accepted after a round trip through another logger
is reporting a difference in the record itself, and the temp ADIF is
deleted the moment TQSL returns, so that difference could not be seen.
Logged on any non-zero exit: the record verbatim, the exit code and the
station location. It is QSO data; the key password is not logged.
Withdrawing auto-call added a runtime guard and removed every control.
The stored preference was left alone, so 'enabled: true' still sits in
localStorage on the machines that had it on -- and any build without the
guard reads it and keys the transmitter for a feature that no longer has
a switch anywhere in the interface.
loadAutoCall now switches it off and writes it back the first time it
reads it, so the disarming survives a downgrade or a reinstall. Also
drops the dead auto-call state left behind in the settings modal.
A withdrawn feature that keys a radio has to be disarmed where it is
remembered, not only where it runs.
Club Log wrote to this station about 167 requests in four minutes and a
coming IP block. That was one deletion of a couple of hundred rows going
through delete.php, which is a REAL-TIME endpoint: it exists for an
operator removing a contact they just logged wrongly, at human pace.
Today's earlier fix stops the requests that were pointless -- QSOs Club
Log never had. This one handles the rest, which are legitimate but still
a batch: one delete every 1.2 s, and a stop at 25 with a line saying to
finish on clublog.org. There is no bulk-delete API to move to, so going
slower and refusing to push a large deletion through a real-time endpoint
is the whole of the answer.
Costs the operator nothing: the withdrawals already run in the
background.
Five entries were written after v0.26.9 was tagged (b952e07), so they
were never in the release the operators actually got -- their What's New
stops at the Club Log delete fix.
Send-on-type keys each character as it is typed, which only the WinKeyer
and Flex CWX can do -- so the checkbox is shown for those two alone. The
stored preference, however, survives a change of engine: an operator who
had used it on a WinKeyer and moved to CI-V carried an invisible switch
that was still on.
The consequences fit the report exactly. Nothing keyed while typing,
because wkSendRaw falls through to the WinKeyer that is not there; and
Enter sent nothing either, because sendText believes the text has already
gone out. Macros take another path and kept working.
The panel now derives the flag from the engine rather than trusting the
stored value.
The transmit row already carries SPLIT, TUNE, MOX, the chaser, its offset
and the TX readout. The marker field was the one control on it that is
set once -- to agree with SDC -- and then never touched again, so it is
summoned by right-clicking the button instead of parked there. Enter
commits, Escape restores. The button's tooltip says so: an unannounced
right-click is not a feature.
The marker field needs no caption -- it sits against a button showing the
same text -- and 'offset' spelled out crowded a row that already carries
SPLIT, the chaser and the TX readout.
Nobody has seen 0.26.9 yet: a fix to a feature released in the same block,
and the panel field it should have had from the start, are not news --
they are how the feature works. Folded into the one entry.
The marker text is chosen in the skimmer, and the two have to agree or
nothing fires -- so it belongs next to the switch, not in a settings page
the operator would have to remember exists. Kept as raw text until blur:
it is a comma-separated list and normalising each keystroke would eat the
comma as it is typed.
GetFlexRSTChase read settings.Get with profileScope() prepended, but the
store already prefixes the active profile: it wrote p3.flex.rst_chase and
read p3.p3.flex.rst_chase. The switch went on in the UI, was saved, and
came back off on the next spot -- so the feature did nothing, silently.
Every refusal after a marker is recognised is now logged with its reason.
The operator has just seen a report marked on the panadapter; if the
slice does not move, the log has to say what stopped it.
Working a DXpedition split means guessing where it listens. The useful
information is not the callsign the DX answered but the FREQUENCY that
station was calling on, and a CW skimmer already marks it: SDC posts each
decoded report to the panadapter as a spot.
Those spots reach OpsLog through the radio's spot feed. On a marker, the
TRANSMIT slice moves there plus a signed offset; the receive slice never
moves, because losing the DX is worse than missing a call. The marker
text is a setting -- it is chosen in SDC by the operator, so any constant
here would be wrong for whoever chose otherwise -- and the switch is a
button beside SPLIT, since it is turned on when a DXpedition appears and
off when it is worked.
Moves are throttled and ignore a marker landing where the slice already
is: a busy pile-up produces several reports a second and the slice would
otherwise never be anywhere long enough to call.
The spot feed is now subscribed to unconditionally. It was tied to
OpsLog's own spot overlay, so an operator running SDC with the overlay
off received nothing -- the reason no foreign spot was ever logged. The
connect-time 'spot clear' stays behind the overlay flag: it wipes every
spot on the radio, a skimmer's included.
Chasing a split pileup with a CW skimmer means acting on the report the
DX just sent: SDC posts what it decodes as panadapter spots, so the 5NN
is already on the radio and OpsLog already subscribes to 'spot all'.
What is not known is the shape of those spots -- which field carries the
report, whether it is the callsign or the comment, what source the
skimmer names itself. Guessing produces a feature that never fires, so
this logs the first 60 foreign spots of a session verbatim and does
nothing else. Bounded because a skimmer posts hundreds an hour.
The award field list offered us_county, which returns STATE,County --
correct for the United States, where Jefferson County exists in several
states, and wrong for every award whose district is already unique. An
RDA reference (RO-19) never matched, and there was no other field to
point an award at.
Adds county, the raw CNTY value, alongside it.
The import printed four numbers and left nothing behind. 1106 matched
and 395 unmatched out of 1501 is not a report: the operator cannot see
which contacts were confirmed, nor work through the discrepancies.
Two additions. The Results view is now filled with the confirmed
contacts, flagged new entity/band/mode/slot against what LoTW and paper
QSL already confirm -- the only sense in which a HAMLOG confirmation
changes anything. And the unmatched ones can be written out as ADIF,
because a few hundred of them are a list to open and compare, not
something to read in a log window.
Deleting a selection with 'delete from the remote services' on took
minutes. Club Log was called for EVERY deleted QSO, uploaded or not, and
for the ones it never had it answers 403 -- a full network round trip per
contact, in series, on the goroutine the UI was waiting on. QRZ already
skipped records with no stored logid; Club Log had no equivalent guard.
Three changes, each fixing one part of the delay:
- only contacts whose clublog upload status is Y or M are withdrawn;
- the withdrawals run in the background, after a snapshot -- the local
log is the operator's own copy and must not wait on two websites;
- the hooks read the rows in one query instead of one per id, which on
a remote MySQL logbook was 2 round trips per QSO before the DELETE.
Consecutive refusals now abort the run: Club Log blocks an account that
keeps sending requests it refuses, so working through the rest of the
selection only earns a longer block.
Their agent protocol has no download verb, so the return path is a file
exported from their site. Running that file through the ordinary ADIF
import is the wrong tool and does real damage: it matches on callsign +
UTC minute + band + mode, their export is rebuilt from their own
database and rarely agrees to the minute, and 'update duplicates' then
inserts everything that failed to match -- several hundred copies of
contacts already in the log.
This path matches only. It stamps the confirmation on QSOs it finds,
falls back to the mode-CLASS key for the modes their export renames, and
REPORTS what it could not match instead of adding it: an unmatched
confirmation is a question about the log, not a contact to create.
Also logs and reports how many rows a delete actually removed -- silence
there made a delete that did nothing indistinguishable from one that
worked.
After an import that inserted instead of updating, there was no way to
ask which records it created: an import of old contacts carries old QSO
dates, so it hides among them. created_at is the only column that knows,
and it was not filterable.
Listed as a date column so a bare YYYY-MM-DD compares on the date part,
like qso_date.
The QSL Info tab knew every upload service except the newest one, so a
contact uploaded to HAMLOG.online could be edited everywhere but there.
It is stored in the ADIF extras rather than QSO columns -- like the
OpsLog card -- hence a channel of its own instead of a CONFIRMATIONS
entry, but it gets the ordinary sent/received/date editor because it
behaves like QRZ.com or Club Log, not like a printed card.
Its four columns move from the QSL group to Uploads for the same reason:
QSL is for cards, an upload service belongs with the upload services.
Same reasoning as the selected-rows export: ExportADIFFiltered was called
with includeAppFields=false, so a filtered export lost the award
references. A second entry, next to the standard one.
The right-click export always called ExportADIFSelected with
includeAppFields=false, so it wrote strictly standard ADIF. That is the
right default when the file is going to another logger, but it silently
drops every APP_ tag -- and an award reference such as RDA@KR-04 lives in
APP_OPSLOG_AWARDREFS and nowhere else. Backing up a selection, or moving
it to another OpsLog, lost the awards.
Adds a second entry rather than a flag on the first: the two exports
answer different questions, and a checkbox in a context menu would have
to be read before every export.
A log imported from HAMLOG.online carries the Russian district in CNTY, and the
offline RDA database has its own answer for the same contact. Which wins is a
real question — but only if the two are independent. If HAMLOG's value is itself
a lookup in the same kind of database, there is nothing to arbitrate and a
precedence rule would be ceremony around a redundancy.
So this measures instead of deciding: Settings → RDA gains a read-only compare
that reports agreements, disagreements, and the contacts where only one side
knows, then lists the disagreements — callsign, date, both districts, whether
the database answer was a DATED record (the award administrators' own fact) or
the callsign's current district (an assumption), and whether the QSO is
confirmed on HAMLOG (their value has then been through a match of two logs).
It changes nothing in the log. What to do about a conflict is the next decision,
and it should be taken with the operator's own numbers in hand.
Also: the four HAMLOG fields become filterable, so 'never sent there' is a
filter rather than a guess. A field that can be written and not read back is
half a feature — pinned by a test against the bulk-editable list.
A real record from their export settles it:
<CALL:4>RL6M … <CNTY:5>RO-19 <APP_HAMLOG_R150COUNTRY:6>Russia
<APP_HAMLOG_QSO_CFM:1>Y
The confirmation lives in APP_HAMLOG_QSO_CFM. The four names guessed before a
file was available — APP_HAMLOG_QSL and friends — were all wrong, which is the
argument for reading one rather than reasoning about it.
So that becomes the canonical key everywhere: the award source, the row colours,
the grid column and the bulk editor. Importing a log downloaded from HAMLOG now
carries its confirmations into OpsLog with nothing to rename. The older names,
including the APP_OPSLOG_HAMLOG_QSL that OpsLog itself wrote in the meantime,
are still honoured on read so nothing already stamped stops counting.
Preferences → Confirmations gains a HAMLOG.online row, sent and received, with
the same defaults every other service has: a new QSO can start at N so the
backlog is meaningful from the first contact. The defaults reach it through a
new setExtraDefault — fill() writes through a pointer to a string field and
these two live in the extras map, which no pointer reaches.
The QSO grid gains four HAMLOG columns (status and date, both directions),
hidden by default: a column per service shown to everyone is how a grid becomes
unreadable.
And the paragraph explaining what "Sent" means is gone from that page.
rouggy