Renames the Hardware section to Amplifier and adds an amplifier-type selector
(4O3A PowerGenius XL, SPE Expert 1.3K-FA / 1.5K-FA / 2K-FA) plus a transport
choice for the SPE amps: USB (serial COM + baud) or Network (RS232-to-Ethernet
IP:port). PGXLSettings gains Type/Transport/ComPort/Baud (keys keep the pgxl.*
prefix for back-compat). PowerGenius still drives over TCP; SPE settings are
stored but control is not wired yet (needs the SPE serial protocol).
- Denkovi (FT245 D2XX) now selectable as 4 or 8 relays (a 4-relay board just uses
the low nibble); NewDenkovi takes a count, driven by the device's Channels.
- New 'usbrelay' backend: cheap CH340/LCUS USB-serial boards over a COM port
using the common A0 protocol ([0xA0][relay][state][checksum]); write-only, so
Status is a shadow. Channel count configurable (1/2/4/8/16).
- StationDevice gains Channels; deviceRelayCount() drives label/relay counts for
the variable-size types. Device editor: channel selector + COM-port picker
(usbrelay) / FTDI-serial (denkovi).
Both untested on hardware; the A0 command set / Denkovi bit order may need a tweak
after a live test.
Third relay device alongside WebSwitch and KMTronic. Despite enumerating as a
COM port, this board is driven via FTDI D2XX synchronous bit-bang (one byte = 8
relays, bit 0 = relay 1), not serial ASCII — so we load ftd2xx.dll at runtime
(no CGO) and call FT_OpenEx/FT_SetBitMode/FT_Write, addressing the board by its
FTDI serial (e.g. DAE0006K), exactly like the vendor tool. Windows-only (stub
elsewhere); ListDenkoviDevices enumerates connected serials for the picker.
Wired into relaydev (Count/Status/Set), app.go (deviceDriver/relayCountFor/type
whitelist + ListDenkoviDevices binding), and the Station device editor (new type
+ FTDI-serial field with Detect). Untested on hardware; bit order / on-polarity
may need a flip after a live test.
Adds a Rename button to Settings -> Database: renames the current SQLite database
(e.g. opslog.db -> F4BPO.db) while preserving every setting/profile, unlike New
database which starts empty. Implemented as a VACUUM INTO copy + pointer switch;
the old file (open and locked now) is scheduled via config.json delete_pending
and removed, with its -wal/-shm sidecars, on the next launch.
Automatically switches the Station Control relay boards from the rig's
current frequency / band. Each relay carries one rule: off (manual), a
frequency window (ON inside [lo,hi] kHz, OFF outside), or a set of bands
(ON on those bands, OFF elsewhere). Evaluated on every CAT frequency/band
change; a relay is only switched when its desired state actually changed,
so tuning within a range doesn't hammer the board.
A cached atomic flag keeps the CAT hot path a no-op when the feature is off
(important during FT8 slice churn). Saving re-applies from the live
frequency so a changed rule takes effect immediately.
New Settings → Hardware → Relay auto-control section: master enable plus a
per-relay mode (Off / Frequency / Band) with kHz range inputs or band
chips, per configured relay board. i18n EN + FR. Azimuth/Time modes (the
other two PstRotator tabs) are left for later.
PANELS[selected]() invokes each settings panel as a plain function, so a panel
must not call hooks. ADIFMonitorPanel uses useState/useEffect/useI18n, which
broke the Rules of Hooks and blanked the section. Render it through JSX
(() => <ADIFMonitorPanel />) so it mounts as a real component with its own
hook context — same pattern as the Flex panel.
Watches a configurable list of external ADIF files (fldigi RTTY logbook,
N1MM, VarAC…) and imports newly appended QSOs automatically. Each record
goes through the existing UDP-log path, so it gets full enrichment, ±2-minute
dedup (shared udpLogMu, can't race the UDP auto-log) and automatic upload to
the configured external services — no per-file toggles like Log4OM.
A newly added file starts at its current size (offset -1 sentinel → size on
first scan), so the QSOs already in it are NOT bulk-imported; only contacts
logged after it was added come in. Reads only up to the last complete <eor>
so a half-written record waits. Handles truncation/rotation (re-reads from 0,
dedup protects) and persists per-file offsets without clobbering a concurrent
UI edit of the file list.
New Settings → ADIF monitor section: master enable + add/remove/toggle files.
Backend emits adifmon:imported → the grid refreshes and a toast reports the
count. i18n EN + FR.
Opt-in via Settings→General (portable pref opslog.showQsoRate). Shows the
contest-style QSO rate in QSOs/hour, projected from the trailing 10-minute
(count ×6) and 60-minute windows, between the widget icons and propagation.
Backend: qso.RecentRate counts QSOs whose start time falls in each trailing
window, scanning only the last 400 rows (cheap on a large log); App.GetQSORate
exposes the 10/60-min counts. Frontend refreshes on qso:logged and a 30s tick.
The meter shares the propagation grid cell — the header is a fixed 6-column
grid, so adding it as its own child pushed profile/band-map/compact onto a
second row. i18n EN + FR.
Backend: replace the bounded cluster-event channel (which dropped spots
under RBN bursts once enrichment/UI fell behind) with an unbounded
clusterQueue (slice + sync.Cond). The socket-read goroutine still never
blocks, but a burst now grows the backlog and drains instead of losing
spots. Head compaction keeps a sustained burst from growing the backing
array without bound.
ClusterGrid: drop all hard-coded light-theme hex colours (Time, Country,
Spotter, Comment, POTA, band/mode fills) for semantic CSS-var tokens so
they read correctly on every theme. Replace the heavy full-cell band/mode
fills with small rounded pills (cellChip). Only NEW MODE pills the mode
cell — NEW SLOT (band and mode each worked, just not together) no longer
highlights the mode cell, which wrongly implied the mode was new.
App: stage incoming spots ~50ms and resolve their slot status before
inserting, so a row paints with its badge already on instead of flashing
plain text then flipping to a pill. Self-spot toast still fires per spot.
i18n: translate the General settings that were still English — telemetry
and live-status toggles, the Main view pane pickers and their options.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
rouggy
