The watch list was a tab, and an operator working FT8 lives on the decodes
one: a station they had asked to be told about turned up on a screen they
were not looking at. The same answer is now docked in the widget strip,
above the tabs, reduced to what is worth acting on — on the air and still
needed, one row per band and mode, with the cluster's own NEW DXCC /
NEW BAND / NEW SLOT badge and a click that tunes. Off by default. The
"active and needed" answer costs a debounced query per visible slot, so it
is written once (lib/watchlistSpots) and the tab uses it too.
Auto-call:
- It answers a new prefix, county, state, square or park. Those markers
are orthogonal to the entity, they ranked as nothing-needed, and the
engine sat through a never-worked WPX prefix calling CQ. New rung at
the foot of the ladder, gated by the chase switches the badges use —
which meant making those switches portable, since the backend cannot
read localStorage.
- It calls THROUGH a pileup. Giving up the moment the DX answered
somebody else is precisely how a queue is not worked; the call and miss
counters already bound the effort, and a station in mid-exchange is
still never chosen as a new target.
The PSK Reporter panel now follows the station auto-call is waiting for:
the analysis takes a history query and a period or two to fill, so
starting it when the DX comes free is starting it too late.
Callbook lookup: a compound callsign with a page of its OWN keeps that
page's location. QRZ files HP/WE9G under exactly that form, with the
Panama square the station is operating from, and the rule that drops a
home address from a portable call was throwing it away. The record's own
country tells an operation's page from a home page.
Changelog: entries may open with [NEW], drawn as a pill in the What's new
dialog — a release is mostly fixes and the two or three genuinely new
things should not have to be found by reading all of it.
An Icom reached over the LAN streams its receive audio through the Icom
protocol, and Windows sees no sound card for it at all — the audio settings
could only offer the PC's own microphone, so "From radio" had nothing right to
point at and the QSO recorder had nothing to record. The recorder now accepts a
PUSHED source: the decoded stream goes to the speakers and to the recorder
alike, with no virtual cable to set up. Which source it uses follows the CAT
backend, and it is restarted only when that answer changes, so an ordinary
settings save never cuts a recording in half.
OmniRig no longer sends SetSimplexMode to a Yaesu when tuning. It is a silent
no-op on some — an FT-891 logged OK on every spot click while FreqA never
moved — and actively harmful on others. From an FT-2000 log, one QSY:
Vfo="AB"(0x80) Split=0x10000 (off) the operator's state
Vfo="BA"(0x100) Split=0x8000 (ON) after SetSimplexMode
The rig-agnostic "receive and transmit HERE, simplex" call turned split on and
moved reception to VFO B. OpsLog then displayed B — reading the radio correctly,
after having moved it itself. Icom is untouched: there the call is the
authoritative one and the direct write is unreliable.
Also:
- the NEW county badge shows in the entry form itself, inside the field,
where the operator is deciding whether to call.
- the basemap buttons clear the zoom controls; Light sat a few pixels from
the minus button and was being clicked by mistake.
- French cluster status: DÉJÀ CTC reads DÉJÀ QSO.
Ultrabeam on a serial port never worked, and three faults were stacked so
each hid the next:
- Stop() did not wait for the poll loop, so a stopped client kept the COM
port. Every later client then failed with "Serial port busy" — the
program holding it being OpsLog itself.
- startUltrabeam tore the old client down CONCURRENTLY with starting the
new one, and "Test connection" built a second client on a port already
ours. Harmless over TCP, fatal on a port with one owner.
- A silent serial port returns (0, nil) and bufio retries that a hundred
times: a 4 s timeout became ~7 minutes of a frozen poll loop logging
nothing.
The controller then answered at once. Confirmed on hardware: the USB cable
presents TWO COM ports, only the second reaches the controller, and only at
19200 baud — so the speed is pinned in code (an FTDI cable opens at any
speed, and a wrong one is indistinguishable from a dead controller) and the
port field says which one to pick. The first exchange after each connect is
hex-dumped, which separates silence from a wrong baud from a misread frame.
Databases now carry only the tables their role needs. Every target used to
get the whole migration set, so a shared MySQL logbook grew settings and
station_profiles tables nothing ever wrote to — an operator inspecting the
server could not tell which copy was authoritative. Statements are filtered
by role, unknown tables are kept in both (fail-safe), and existing databases
are cleaned once, dropping only EMPTY tables. Settings → Database gains a
Compact button, since SQLite frees pages inside the file and never shrinks it.
Also:
- Awards: the callsigns behind a cell open the QSL Manager on Paper QSL,
searched, ready for the card dates.
- The record button no longer goes missing after an update: whether manual
recording is possible is a per-profile question that was asked once, at
startup, before the profile was known.
- Alert rules and filter presets confirm that they were saved.
- Spot clicks on the radio panadapter carry the POTA park into F3.
- The build gate is re-checked wherever the active callsign can change; it
ran at startup alone, and a fresh install has no callsign then.
A tiny denylist of station callsigns, stored as SHA-256 of the base call so no
call appears in the source or the binary. Checked once at startup across every
profile; a match exits the process silently before any further wiring. Not in
the changelog.
rouggy