Padlocks. LockBtn was declared INSIDE the App component, so every render gave
React a new component type and the button was unmounted and rebuilt — about four
times a second while the CAT polls. It flickered under the pointer and swallowed
clicks, because the node being clicked no longer existed when the click landed.
The padlock now lives at module level and is passed its state.
From-radio level. It reached the QSO recorder and nothing else, so an operator
listening through OpsLog heard no difference between 10% and 150% — the control
was not weak, it was disconnected. It now scales the monitor too, applied on the
captured chunk so the network-fed path keeps its own levels, and a running
monitor picks up a change immediately: making someone restart the monitor to
hear the slider is how a working control gets reported as broken.
Callsign field widened to w-56, the room coming from the RST pair which never
needs more than five characters. It is the one field always typed into, it
carries the REC badges, and a long portable call has to stay readable.
A second press restarted the message from the beginning. What the operator wants
there is to cut it short — enough heard, or pressed by mistake with the
transmitter keyed — and then to be able to send it again at once.
It now shows a stop square while playing and releases the PTT through the same
path the natural end uses, so nothing is left keyed. Together with the device
handover fixed a moment ago, sending again immediately afterwards works.
The grid already badges them; only the filter was missing.
They are not entity statuses — a new park or county is another dimension of the
same spot — so the filter key is now a superset of the status, and matching is
an OR across all of them, as it already was for a previously-worked callsign.
The chips carry the colours their badges use in the grid: a filter that does not
look like what it selects has to be learned twice.
The backend honours the setting: it normalises the log side and the spot's own
mode through the same grouper, so an FT4 spot on a band worked in FT8 reads as
worked. That was not the fault.
Spot statuses are cached per call+band+mode and the cache never expired. Ticking
the box in Settings therefore changed nothing on screen — every spot already
listed kept the answer to the old question, and only new arrivals were judged by
the new rule. The cache is now dropped when settings are saved.
Also: writeUiPref swallowed a failed database write. The interface kept working
from localStorage while the BACKEND — which reads some of these keys, this one
among them — still saw the old value. The two disagreeing in silence is exactly
the shape of this bug, so the failure is now logged.
Settings → FlexRadio, beside the per-band antennas and applied the same way:
when the band or the mode changes. 1.5 kW that is fine on SSB has no business
going into an FT8 signal on the same band.
Three classes rather than one row per mode, because what decides the power is
duty cycle and what the amplifier will take of it, not the mode's name — FT8 and
RTTY punish an amplifier the same way, SSB and AM do not. The classification is
pinned by a test: a digital mode sorted as phone would deliver exactly the
1.5 kW this exists to prevent.
An empty box means "leave the power alone", never zero watts, and an unknown
mode changes nothing — setting a transmit power from a name we do not recognise
is not a good guess.
Unlike the antennas, a locked band does not skip it: the lock means "do not let
the rig drag my log entry around", not "let the amplifier keep whatever the last
mode left".
In CW the transmitter builds its tone from the keyer and ignores the DAX TX
audio path, so the button keyed the rig and sent silence. Confirmed on a Flex:
our side reported the playback as done while nothing went out.
Only the button goes. The row stays, or a CW operator who stopped their
recording would be left with no way to resume it — and the recording itself is
still worth keeping.
CW was excluded because SmartSDR does not route the operator's own sidetone
through DAX, so the recording sounds one-sided. The audio path is open all the
same and the other station IS captured — which is the half worth keeping.
The frontend had ONE list serving two purposes: which modes may be recorded, and
which modes the voice keyer may transmit on. Adding CW to it would have let the
DVK key the rig with speech on a CW frequency. They are now two lists: PHONE_MODES
for the keyer, RECORDABLE_MODES (phone + CW) for the recorder.
Digital modes stay out of both: their audio is a modem tone nobody will replay.
Settings → General, beside the language. An operator reading 2026-07-30 as the
7th of the 30th month is reading their own log wrongly, and that is a display
problem.
Storage stays ISO/ADIF, deliberately and permanently: it is what ADIF
specifies, it sorts correctly as text, and a stored format that followed a UI
preference would make the log unreadable the day the preference changed. Exports
and uploads are untouched.
Two details that decide whether it actually works:
- The columns are rebuilt when the format changes. The formatters are captured
inside AG-Grid's column definitions, so nothing else would notice and the
table would keep the old format until something forced a rebuild.
- main.tsx re-reads the choice after the portable prefs are pulled from the
database. The module reads localStorage at import time, which is BEFORE that
sync — so a copied data/ folder would have shown ISO until the next launch.
UTC is not part of the choice and never will be: a logbook is kept in UTC, and
showing local time would make the display disagree with the QSO's own record
twice a year.
It was the same red as the recording indicator beside it, so at that size the
two read as one control. Green is also what the theme already uses for a
go-ahead action (the amplifier ON buttons), and it is a semantic token, so it
follows all four themes rather than pinning a colour.
Two absolutely-positioned boxes at guessed offsets: right-14 and right-2. They
collided as soon as the counter passed a minute and the text grew — a layout
that only looked right for the first 60 seconds, and did not even manage that at
this font size.
One flex row with a gap, so spacing is a consequence of the content rather than
an arithmetic guess about it. The callsign field also gains right padding while
the badges are shown, so a long call runs under them instead of being typed over.
The situation, in the operator's words: working VP2MAA, recording, and he asks
to hear his own signal. So: stop, play, and the recording is still saved with
the QSO.
Stopping FREEZES the take rather than ending it — nothing more is captured,
nothing is discarded, and logging writes the file exactly as before. Playback
reuses the voice keyer's path: same output device, same PTT keying and release
with its generation guard, so a replay cannot be cut short by a stale unkey.
Playing is refused while still recording. The transmitted audio would feed back
into the same take on any rig monitoring its own transmission, and stopping is
one click the operator has already made — it is their statement that the take is
finished, not a hoop.
The elapsed clock freezes with the recording and resumes from where it stopped,
because it now shows the LENGTH OF THE FILE rather than the time since the QSO
began. Only a fresh take returns it to zero.
A red dot in the slot the counter will occupy. Click it and the counter starts,
the dot disappears, and logging the QSO writes the file exactly as an automatic
recording would — the save path already keyed off an active take, not off the
setting.
With automatic recording disabled the capture engine is not idle, it is not
running at all, so a manual take starts it. Two consequences handled here:
- It is released again when the take ends — logged, cancelled, or dropped for
being a digital mode. An operator who records one contact does not expect
their microphone held open for the rest of the session. The release is a
deferred call at the top of the save path so every exit goes through it,
rather than one that has to be remembered at each return.
- There is no pre-roll. An automatic recording opens with the seconds BEFORE
the callsign was typed; a manual one can only begin now. The button's
tooltip says so, because otherwise the difference between two files is a
mystery to the person holding them.
The button only appears where it can work: devices configured, automatic
recording off, and a mode whose audio is worth keeping. That state is asked of
the backend rather than inferred from a preference in the interface, so the two
cannot drift apart, and it is re-read when settings are saved.
From a Kenwood trace: IF answered mode digit 1 on 7.160 MHz, the backend read
LSB correctly, and the entry form showed no mode at all while the frequency
tracked perfectly.
Nothing was wrong in the backend. Radios report the SIDEBAND, and the station's
mode list holds SSB — so the value pushed into the selector was not in its own
list of options and nothing could match. Yaesu and Icom report the same way, so
this was never Kenwood-specific; it only surfaced there.
Normalising at the point where a rig-reported mode enters the form fixes every
backend at once, rather than editing three mode tables and the next backend
someone writes.
It is also the ADIF-correct direction, which matters more than the selector:
LSB and USB are SUBMODEs in ADIF, not modes. MODE=LSB is not a valid value and
is what would have gone to LoTW and eQSL.
An operator who has deliberately put LSB or USB in their own mode list keeps
them — the list is their statement of what they log, not ours.
Two faults in the progress bar shipped an hour ago.
It was a modal. A hundred QSOs is a minute; a contest log is two thousand and
ten minutes, and for all of it the operator could do nothing else — while their
radio is on. It is now a card in the corner: same bar, same count, same
callsign, none of the imprisonment.
And the menu said "Update from QRZ.com" while the code has always walked EVERY
configured provider, falling through to HamQTH when QRZ answers not-found. The
label is now "Update from the callsign databases", which is what happens.
Noted while reading that code, NOT fixed here because it trades against the
user's API quota and is their call: this path goes through the lookup cache, so
a second run on the same callsigns re-reads the cache rather than reaching the
provider. The cache comment already argues the opposite for deliberate clicks —
"a lookup the operator asked for by clicking is a deliberate act and must reach
the provider" — and a right-click on a selection is exactly that.
Selecting the 102 contacts of a freshly imported contest log and updating them
from QRZ.com is 102 network round trips. Nothing moved on screen while it ran,
so the only honest reading was that the application had frozen — and the natural
response to that is to kill it, halfway through.
The backend now emits a progress event per QSO and the frontend shows the same
overlay the ADIF import uses: a bar, the count, and the callsign being queried.
The callsign is reported BEFORE the lookup rather than after. With a slow
provider that is the difference between "waiting on F4BPO" and a name that lags
one QSO behind whatever is actually taking the time — which would be the field
someone stares at while deciding whether it is stuck.
The overlay is cleared by the closing event and again in a finally, so neither
a completed run nor a failed one can leave it on screen.
An operator worked the RSGB IOTA contest in another logger and got back records
carrying <STATE:5>EU005: N1MM-class software stores the received exchange in the
column its contest module uses, not the one ADIF reserves. Imported verbatim,
every QSO gains a US-state field reading "EU005" and the IOTA award sees
nothing — the reference is in the log, just not where anything looks for it.
The import dialog gains optional source → destination rows, prefilled with
STATE → IOTA since that is the case that prompted it. Applied to the RAW record
before conversion, so it works for promoted columns and Extras alike and the
destination is parsed exactly as if the file had carried it there.
Two rules, both from the same principle that the file outranks our guess:
- the source is CLEARED, so a reference does not linger in STATE where it
would show as the contacted station's US state in the grid and every export;
- a destination the file already filled is kept, judged against the record as
it ARRIVED — otherwise the result would depend on Go's map iteration order,
which is deliberately random.
The swap case in the test is what forced that second rule to be stated: "never
overwrite" and "exchange two fields" cannot both hold silently, so a destination
that is itself a mapping source is treated as an explicit swap and nothing else
is overwritten.
Reported: a 6 s auto-call gap gives clearly less than 6 s between the end of one
CQ and the start of the next.
The wait after sending watched only the keyer's busy signal. That signal travels
from the keyer to the window as an event, and the code gave it one second to
appear before giving up — if it had not arrived and cleared by then, the wait
ended immediately and the gap ran from the START of the call. A 6 s gap after a
4 s CQ becomes about 2 s of silence, which is exactly what was heard.
The message's own duration is now a FLOOR: the wait runs at least the estimated
sending time, and the busy signal only extends it (slow link, long buffer),
capped as before. The estimate can only be approximate, but it cannot be skipped
by a late event, and erring long costs a slightly wider gap rather than a call
that steps on the previous one.
"Showing 10000 of 23683 matches · 28648 total" was read as a filter matching more
than the log holds. The numbers were right — 23 683 matches out of 28 648 QSOs,
capped at 10 000 displayed — but the middle one belonged to "matches" while
sitting where "of N" normally means the total.
Each number is now named where it appears: shown · match the filter · in the log.
Thousands separators too, since 23683 and 28648 are hard to compare at a glance.
No counting change: both counts run over the same table, so matches can never
exceed the total.
Speed: with DTR/RTS line keying the PC does the timing, so the Yaesu console's
slider — which sets the rig's internal keyer — changed nothing audible and looked
broken. Both entry points now go through one handler that drives the engine
actually sending, and additionally sets the rig's own keyer whenever a Yaesu is
on CAT, so the radio's front panel shows the same figure.
SWR: an operator reads 80 on the bar with a real SWR of 1.1. That is the shape of
reading the WRONG METER — ALC, say — not of a scaling error, and which RM index
carries which meter is not consistent across the family. Rather than guess again
and move the wrong number somewhere else, the first transmission now logs RM1
through RM6 raw, once. The log will say which index is which on this radio, and
the mapping can then be corrected as a fact.
Three places decide what a rig keyer is, and the Yaesu was only in two of them.
The CW panel's status came from a list naming icom and flex; anything else fell
back to the WinKeyer status, which reports disconnected because no WinKeyer is
attached. So the panel said the rig CAT was offline while the console beside it
was reading the FTDX10 perfectly.
The send loop had the same gap: a rig keyer BUFFERS the whole message, so the
wait before <LOGQSO> is a length estimate, while WinKeyer watches a busy echo
that will never arrive here. Auto-call would have raced the transmission.
This is the third time the same shape has bitten in this feature — a list of
engines that needs every member named, with a silent fallback for the rest.
Grepping for the pair "icom || flex" is what finds them.
Choosing "Yaesu (rig keyer)" saved correctly and still produced a WinKeyer panel
asking for a COM port. The engine is normalised on load through a chain that
names icom, flex and serial and maps EVERYTHING ELSE to "winkeyer" — so the
value came back as WinKeyer on every read, whatever the settings said.
That is why the panel offered COM3 then COM10: it genuinely believed the engine
was a WinKeyer. The list now names yaesu too.
The same shape of bug is worth watching for: a normaliser with a silent default
turns an unknown value into a plausible one instead of an error, and the symptom
appears far from the cause — here, in a panel three components away from the
setting.
Selecting the Yaesu keyer fell through to the WinKeyer branch of the settings,
which offers a serial port picker and a Connect button. So the operator went
hunting for the right port — trying the standard COM and the enhanced one in turn
— and neither connected, because this keyer uses NEITHER: it keys over the CAT
link already configured in Settings → CAT.
It now has its own branch, like the Flex one: a speed field, the warning when the
CAT backend is not a Yaesu, and a line saying explicitly that keying rides the
CAT link. Speed changes go to the rig's keyer instead of a WinKeyer that is not
there.
The radio has a keyer and a command to feed it (KY), so an FTDX10 needs no
WinKeyer and no second cable, exactly as the Icom CI-V and Flex CWX engines
already do. The rig keys with its own timing, which is why the spacing is right
where a PC keying a line through USB latency drifts.
Text is filtered to what the keyer can actually send: an unsupported byte does
not produce an error on a Yaesu, it can abort the whole buffer, so the rest of a
macro would vanish silently. It is then fed in 24-character pieces, waiting for
room between them — the rig DROPS what does not fit, again with no error, so a
contest CQ would lose its tail.
STOP is the honest gap. Yaesu documents no buffer-clear, so it drops the
transmitter (TX0) instead: nothing queued reaches the air, which is what Escape
means to an operator. It deliberately does NOT send "KY0;" — a plausible-looking
clear that the rig would read as the CHARACTER zero and transmit.
A test caught a real one on the way: tabs and newlines were dropped as
"unsupported", gluing the words either side together, so a macro written on two
lines went out as CQCQ. Whitespace now becomes a word gap before filtering.
Settings warn when the Yaesu keyer is selected without the Yaesu CAT backend —
otherwise it simply never keys, with nothing on screen saying why.
Send path follows the CAT reference and how Hamlib drives these rigs; NOT yet
verified on the air.
Reported on the FTDX10: listening on 14.244 with VFO B still holding 18.115 from
an earlier session, pressing SPLIT threw the transmitter onto another band. The
button only flipped the rig's split flag, and the other VFO is stale by nature —
the only transmit frequency that makes sense is one derived from where the
operator is listening NOW. SPLIT therefore places the TX VFO too: up 1 kHz on CW
and the data modes, up 5 kHz on phone, the offsets operators actually call. The
+1k / +5k buttons remain for anything else, and a test pins the mapping.
The panel also drew its own flat meters while the Flex and Icom consoles use the
shared LED-segment MeterBar. Two instrument styles in one application is just
inconsistency — it now uses the shared component, and the local one is gone.
And the three consoles are named alike: "Flex Console", "Icom Console", "Yaesu
Console", in the tabs and in the Main-view pane list, in both languages.
First look on the FTDX10 turned up six things:
The S meter printed a raw percentage — "57" tells an operator nothing, and it is
the S number that goes into a report. It now reads S1-S9/S9+dB, the same value
the click-to-fill RST already used.
CW, RTTY and the data modes exist on BOTH sidebands and the operator is the one
who knows which they want. The buttons now carry the rig's actual sideband and a
double-click flips it; PSK is added, riding the rig's DATA mode as it does on the
radio itself. This also means the mode row drives the rig directly (MD0 with the
exact mode) instead of going through the ADIF path, which could only pick a
sideband by convention.
The attenuator is a 6/12/18 dB pad on these rigs, not the single step I assumed —
two thirds of the control was unreachable.
Sliders had no visible filled side: --muted is barely lighter than the card it
sits on, so the whole track read as one bar. They also came in three kinds (two
bare range inputs among them). One component now, explicit track colour, and it
takes a min/max so power in watts and DNR 1-15 look like the rest.
The panel stretched across the whole window; it is a column of controls, so it is
now capped and every row stays readable.
And it gets its own Yaesu tab, like FlexRadio and Icom, rather than only being
available as a Main-view pane.
A console pane for the native Yaesu backend, in the same shape as the Icom and
Flex ones: S/PO/SWR meters, band and mode rows, AF/RF/squelch, AGC, the IPO/AMP1/
AMP2 front-end selector, ATT, NB, DNR + level, narrow filter, power in watts, mic
gain, VOX, split and ATU tune.
Three decisions worth keeping:
Panel reads are STAGGERED and live in their own file, away from ReadState. Meters
poll every cycle; settings only change when someone turns a knob, so they refresh
every 8th cycle and right after any set. Polling all of it every cycle would put
twenty queries a second on the serial link the frequency display shares.
Band buttons use the rig's own band memory (BS) rather than a frequency we pick,
so 20 m lands where the operator last was on 20 m — what the radio's own band
keys do.
A set is followed by a read-back, so the panel shows what the RIG ended up with,
not what we asked for; the two differ whenever a value is out of range or the
mode forbids the control. And a control the model lacks keeps its previous value
instead of dropping to zero, which reads as a setting that reset itself.
The S9 point of the S-meter scale is a hypothesis (the manual does not state it)
and is commented as such — one number to correct if reports come out an S unit
off, rather than a fudge spread through the RST helper.
Also removes the FlexRadio settings blurb, which explained the backend to
someone who had already chosen it.
The log settled it: the backend was right all along. Every set produced
"readback +1.5s FreqA=21140000 Freq=21140000 -> shown 21140000" and published
cat:state with the new frequency and band. The display did not follow.
The fault is in the frontend. Changing band does two things at once: it opens the
1.5 s freeze that protects what the operator is typing, and it commands the rig.
The rig's answer comes back in ~170 ms — inside that freeze — and the handler
DROPPED any snapshot arriving during it. The backend only emits on change, so
nothing came afterwards, and the strip kept the old frequency until the VFO was
nudged. Changing band from the radio always worked because no freeze was open.
A dropped snapshot is now kept and replayed when the freeze closes, rather than
discarded. Further typing simply defers the replay again.
Reported on 3 cm. cat.BandFromHz stopped at 23 cm, so a 10 GHz frequency came
back EMPTY — and an empty band is not cosmetic: the QSO is logged without one,
counts in no award slot, and exports with no BAND field. The low end was short
too (2190m / 630m / 560m).
Four band tables had to be extended because four exist: the CAT one, the award
plan in app.go, the cluster spot classifier, and the frontend's. Plus the places
that LIST bands — the QSO editor and award-definition pickers (you could not set
3 cm by hand either), the statistics axis, and the award band ORDER, where a
missing band sorts to the end instead of in frequency order.
Ranges and names are ADIF 3.1.7, which is what an export has to carry.
A test now pins one frequency per band across the Go tables and asserts they
agree — that is what was missing, four hand-maintained copies with nothing
checking them. It also pins that an out-of-band frequency stays empty rather
than snapping to the nearest band, which would file a QSO under a band the
operator never used.
Switching station is the frequent act and editing a profile the rare one, but
the callsign opened the settings — so changing station took four clicks and a
scroll. It is now a dropdown of every profile: pick one and it activates. The
active one is ticked and disabled, and "Manage profiles…" stays at the bottom
for the rare case.
The list reloads on every profile change, so a profile added or renamed in the
settings appears without a restart.
The UTC clock leaves the header for the status bar, next to the database: in the
header it sat beside the frequency in the same weight and competed with it for
the eye, while being something you consult rather than watch.
Grid on the UDP path — WSJT-X and MSHV can only send a FOUR-character grid,
that is all the FT8 protocol carries. The enrichment rule there is "fill only
what is empty", so the coarse JN05 always won and QRZ's JN05JG was thrown away:
roughly 100 km of accuracy discarded on every digital QSO. The lookup grid is
now taken when it EXTENDS the received square. A lookup that disagrees outright
(JN18 against JN05) is not a refinement — the station may be portable and what
came over the air is then the better record. Both rules are pinned by tests.
Manual fetch in the QSO editor — it read the CACHE, valid for 30 days. An
operator who upgraded their QRZ subscription went on getting the thin
free-account record and clearing the cached row by hand was the only way out.
The button now forces a lookup that bypasses the cache, reaches the provider and
REFRESHES the stored row, with a 15 s budget instead of 2 s: a deliberate click
must reach the network, where giving up early would fall back to cty.dat and
look like nothing happened. The automatic type-ahead lookup keeps the cache,
which is where it earns its keep.
Same fetch: it used `??`, which only guards against null. Go marshals an unset
string as "", so a QRZ record with no grid BLANKED the grid already in the QSO.
The lookup still wins — that is the point of asking for it — but an empty
result no longer erases a good value.
Statistics — the activity chart ignored the period selector: picking a year up
top left it showing the last 7 days, two controls contradicting each other. The
buttons were four fixed rolling windows anchored on the newest QSO, not
granularities. They now choose the BUCKET SIZE over the selected period, with an
Auto default and a step-up when a bucket would be too fine (the backend drops a
series past 750 buckets rather than ship 6000 unreadable bars). The hour-of-day
histogram covered a single day, too little to read anything from; it moves to
its own card with a weekday view, over the whole period.
Band map — the CW/data/phone sub-bands were shaded with the STATUS tokens, the
same amber that means "new band" on the pills drawn on top of them. A sub-band
is an identity, not a state: categorical hues now, validated in both themes
(violet failed on the dark steps — 1.9 ΔE from blue for a protan reader) and
added to the legend, since identity must never be colour-alone.
Frameless window — the OS title bar was a dead 32px band above a window that
already has its own. Minimise/maximise/close move into the app header, which
carries the drag region and double-click-to-maximise. The drag opt-out is by
ROLE in CSS, so a future button in that bar keeps working without anyone
remembering the rule.
Fixes:
- Saving settings froze the window while a device was slow: restarting a link
waits for its poll goroutine, which can sit 45 s inside an uninterruptible COM
Connect when another program holds the rig. The restart is now off the UI
path; a slow one is logged.
- Multi-screen: a MAXIMISED window was never repositioned, so it came back on
the primary screen every launch. The corner is now recorded even when
maximised (it names the monitor) and re-applied while still hidden.
- The Callsign field is marked out at rest — operators were typing the call into
Name, which sat beside it and looked identical.
- QSL dates get a real picker (native, for the OS calendar and locale order); a
malformed old value stays in a text box rather than vanishing behind an empty
one.
Also: a Support OpsLog entry in Help, and a WinKeyer protocol trace. The WK2
report (one element then a ten-second pause, sidetone that will not switch off)
is NOT fixed here: the WK1/WK2/WK3 command sets differ and a guessed fix would
break the operators it works for today. The trace logs every byte with the
command name and spells out the firmware family, which is what will settle it.
The Main-tab pane and the full Recent QSOs tab are the same component sharing
one storage key, but the pane is about half as wide — so it wants fewer and
narrower columns. Whichever was opened last rewrote the other's widths.
The pane now stores under "mainpane", which also scopes its award-column
visibility and widths. The full tab keeps the historical key, so its layout is
untouched; the pane starts from defaults once.
1. A language change rebuilt the column defs, which sets the anti-clobber
guard, but the effect that clears it listened to only two of the rebuild's
causes. Guard stuck on → every column change was silently discarded for the
rest of the session. Now keyed on the rebuilt defs themselves, so any future
cause is covered.
2. The cluster grid had no guard at all: the same rebuild wrote its defaults
over the saved layout, in the cache AND the database. Unrecoverable.
3. Worked-before and cluster read their state before the active profile was
known, so they looked up the unscoped cache key (always a miss) and then
saved under the scoped one. They now wait for the scope and remount on a
profile switch, like the main log.
4. GetUIPref returns an ERROR, not "", while the settings store is not yet
scoped — deliberately distinct from "unset". The frontend read it as "no
preference", rendered defaults, and the first column event overwrote the
good copy. It now retries instead of giving up.
5. The QSL manager had no storageKey, so it shared the main log's layout and
each rewrote the other.
Also: the DB write is debounced (a resize drag fired dozens of writes) with a
flush on close, and a rejected write is retried rather than dropped.
OmniRig reports the VFO pair (AA/AB/BA/BB) on the whole Yaesu range and never
the single-letter form. Only the latter was honoured, so every rig in that
family stayed pinned to VFO A: pressing SUB moved the radio but not OpsLog,
and a QSO worked on SUB was logged on the main VFO's frequency. The first
letter of the pair is the VFO being listened on — Log4OM reads it and gets the
right frequency on the same rigs, which is what showed the data was there.
The enum now wins over the Yaesu Freq==FreqB inference, which is only a
fallback for a rig file that names no VFO at all (the stock FTDX10 one answers
neither VS; nor FR; usably — verified on the air).
Split: the ON flag is still latched to survive a rig file that flips it on its
own, but the latch is now ARMED only after 8 flips in 30 s. A first cut at
3-in-15s was armed by the operator toggling split while testing, imposing the
6 s clearing delay on a radio that did not need it; a misreading file flips a
dozen times in that window untouched, so the two cases separate cleanly.
Distance (km) column added to Recent QSOs and Worked before (shared catalog).
Computed from the QSO's OWN my_grid/my_lat/lon first, falling back to the
current profile's locator: a log spans years and portable outings, so the
station a QSO was made from is not necessarily today's.
Locator: a precise QRZ/HamQTH grid is no longer overwritten by the cty.dat
entity centroid. The lookup runs several times per QSO and the provider gets
2 s; a slow second answer fell back to cty.dat and downgraded JN05JG to JN16
while name and QTH survived (they are only written when non-empty).
The OmniRig diagnostic line now logs what OpsLog concluded, not just what
OmniRig reported. icomnet.go: gofmt alignment only.
- SCP/N+1: new internal/scp downloads the community MASTER.SCP master list and a
docked two-column widget shows, as you type a call, the known calls containing it
(Partial) and the calls one edit away (N+1) — click to fix a busted call. Opt-in
in Settings → General; top-bar toggle; queried debounced on callsign input.
- Flex: OpsLog's GUI-client detection was too loose and could bind to "SmartSDR CAT"
(or DAX) — both carry "smartsdr" in the program name — instead of the real GUI
client, making SmartSDR CAT drop and reconnect in a loop while OpsLog was open.
Now it binds only to a real SmartSDR/Maestro GUI client (e.g. a FLEX-8600M's
integrated screen) and excludes cat/dax; dropped the risky empty-program fallback.
- Telemetry: on a fresh install the callsign isn't set at launch, so the once-a-day
heartbeat recorded the machine UUID. Now it waits (~10 min) for the operator to
enter their callsign before sending, falling back to the UUID only if none appears.
For an entity resolved only via cty.dat (e.g. a French call not on QRZ/HamQTH),
the provider block sets a coarse country-centroid grid. The worked-before backfill
now overrides that with the precise locator from the last QSO with this call, and
takes that QSO's lat/lon (derived from the grid when the record stored none) so
the map and saved record stay consistent. A real provider grid still wins.
Moved the (unreleased) worked-before backfill entry into a new 0.21.2 changelog
block, since 0.21.1 is already out.
When a callsign resolves only to cty.dat (not on QRZ/HamQTH, or no lookup service
configured) — or the lookup errors — enrich the entry from the most recent QSO
already in the log with that call. Fills ONLY the fields the provider left empty
and the operator hasn't edited (name, QTH, grid, country, address, state, county,
lat/lon, zones, continent, email, QSL-via), so a real QRZ/HamQTH hit is never
overridden. Uses the worked-before entries (qso_date DESC, [0] = latest) via a
live ref so it works regardless of the lookup/worked-before debounce ordering.
CSS `zoom` re-lays-out and pixel-rounds each element, which opened ~1px seams
between map tiles (a faint grid over the map when zoomed). Switch the persistent
UI zoom to `transform: scale(z)` from the app root's top-left, with the root
counter-sized to (100/z)vw × (100/z)vh so it reflows to fill and scales back to
the window. transform scales the subtree as one composited layer, so tiles stay
seamless. Removed the now-unneeded tile-overlap CSS hack.
Under our CSS zoom the map tiles scale by a fractional factor, opening ~1px gaps
between adjacent tiles that read as a faint grid over the map. Tag the document
with data-uizoom and, only while zoomed, enlarge each 256px tile by 1px so
neighbours overlap and cover the seams. The 100% view is untouched.
CSS `zoom` doesn't rescale viewport units, so the 100vh app root left an empty
strip below the UI when zoomed under 100%. Counter-size the app root to
(100/z)vw × (100/z)vh so that, after the zoom scales it back down, it exactly
fills the window again. Zoom still applies to the whole document so portalled
menus/modals scale with it.
- Zoom: our own Ctrl+wheel zoom (CSS zoom on the root, 50–250%), persisted in
localStorage and restored at startup; Ctrl+0 resets. Replaces the non-persistent
native WebView2 zoom. The freq-digit wheel now ignores Ctrl so it passes through
to zoom.
- Award column widths: they were stripped from AG Grid's saved column state (that
strip fixes a visibility desync) which also dropped their width. Now persisted
separately per award code (localStorage + portable DB copy) and re-applied on
rebuild/reopen.
- CW keyer widget: macros padded to 9 (F1–F9 slot) and empty macros hidden like
the voice keyer, with the F-number kept tied to the real macro index so the
F-key shortcuts still line up. New QRZ? default for F9.
With ESM enabled (Settings → CW Keyer), the keyer active and mode CW, Enter in
the entry strip fires a macro by QSO stage instead of logging:
- callsign field empty → F1 (CQ)
- callsign entered (in call field) → F2 (report), then focus jumps to RST-sent
- Enter in RST-sent / RST-rcvd → F3 (TU), which logs via its own <LOGQSO>
Works for every keyer engine (WinKeyer / serial DTR-RTS / Flex CWX / Icom CI-V)
since it routes through the shared macro sender. Enter in other fields still logs
normally, and ESM off keeps the classic Enter-to-log behaviour.
Backend: new `esm` flag on WinkeyerSettings (winkeyer.esm). Frontend: esmHandleEnter
state machine keyed off data-esm markers on the call/RST blocks, a Settings
checkbox + hint, and i18n EN/FR.
Rolling the mouse wheel over the hundreds / tens / units-of-kHz digit of the
header (and compact top-bar) frequency steps the frequency by 100 / 10 / 1 kHz
(wheel up = higher). The display updates optimistically on every notch and the
rig QSYs over CAT, debounced so a fast scroll doesn't flood the link. Only the
kHz digits are wheel-sensitive; MHz and Hz stay static.
New FreqWheelDisplay component (replaces the plain fmtFreqDots span in both the
full header and the compact top bar) + nudgeFreqHz handler.
Addresses three points of feedback on the Tuner Genius work:
- Meter sizes: the amplifier meters were rendered `compact` (smaller than the
FlexRadio meters). Dropped compact so the amp, tuner and Flex meters are all
the same size.
- Collapsible cards: the FlexRadio panel Card, AmpCard and TunerCard now fold
from a chevron in the header, state persisted per card (opslog.cardOpen.*).
The amplifier cards share the "amplifier" collapse key across their SPE/ACOM/
PGXL variants so folding sticks regardless of the shown model.
- TGXL responsiveness: the tuner's device poll dropped 1500ms→400ms and the
three UI pollers 1500ms→500ms, so the SWR/power meters track TX without the
2–3s lag behind the amplifier the user saw.
- Icon: the Tuner Genius top-bar toggle used Zap, same as the CW keyer — changed
the tuner's icon (top bar + widget + card) to Gauge so the two are distinct.
Push the tuner control further so it mirrors the native 4O3A app and the way the
PowerGenius XL is surfaced.
Backend (internal/tunergenius):
- Status now carries both RF channels A and B (source/mode, band, frequency,
bound Flex nickname, per-channel bypass, antenna, PTT), the active channel,
the C1/L/C2 relay-network positions, and the 3-way-vs-SO2R hardware variant
(learned once from the `info` reply). Flat freq/antenna still mirror the active
channel for the compact widget.
- New TunerGeniusActivate(ch) binding → `activate ch=N` (or `ant=N` on 3-way).
Frontend:
- New shared TunerCard, styled exactly like AmpCard (PWR/SWR meter bars,
A/B channel selector with source+freq+antenna, Tune/Bypass/Operate). Used in
BOTH the FlexRadio panel (its own card, like the PGXL) and Station Control.
- Docked TunerGeniusPanel widget now shows the two channels A/B with their
source/frequency/antenna and lets you click to make one active — the missing
A/B state the user flagged.
- i18n EN/FR for the new labels (channels, antenna, in-line/bypassed, title).
Still UNTESTED on hardware — verify the per-channel field names/units and the
activate behaviour on the real box.
New internal/tunergenius client speaking the same "Genius Series" text API
as the Antenna Genius / PowerGenius XL: banner on connect (with optional
"AUTH" for remote access), "C<seq>|<cmd>\n" commands, "R<seq>|<code>|<msg>"
replies and the "S<seq>|status k=v …" snapshot; async "M|<msg>" info lines
are consumed inline. Polls status ~1.5s and exposes SWR (return-loss dB
converted to a VSWR ratio), forward power (dBm→W), and the operate/bypass/
tuning/active-channel state. Actions: autotune, global bypass, operate/standby.
Controlled directly (not via the radio) so OpsLog uses only one of the box's
four connection slots, per the device's protocol doc.
Wiring:
- app.go: tunergenius.* settings keys, Get/Save/start, GetTunerGeniusStatus,
TunerGeniusAutotune/SetBypass/SetOperate; started in the background at launch.
- Settings → Tuner Genius panel (enable + IP + optional remote code).
- Docked TunerGeniusPanel widget (SWR/power readouts + Tune/Bypass/Operate),
top-bar toggle, shown when enabled — mirrors the Antenna Genius widget.
- i18n EN/FR (sec.tunergenius, tg2.*, tgp.*).
Command verbs (operate/bypass/autotune/status/auth) come straight from the
4O3A "Tuner Genius XL — Protocol Description"; UNTESTED on hardware.
award_refs was only reset when the callsign was emptied, so swapping from one
call to another (e.g. clicking successive spots) kept the previous station's
references in the F3 Awards tab. Move the reset to just past the same-call guard
so any change clears them; the new call's spot POTA + live detection re-populate
right after. Changelog 0.21.1.
Add a keyNav prop to BandMap: when set (only the docked Main-view map, not the
multi-band Band Map tab), Ctrl+ArrowUp / Ctrl+ArrowDown selects the next in-band
spot above / below the rig frequency and tunes to it via the existing spot-click
handler. Higher freq is up on the map (freqToY), so Up = next higher spot.
Ignored while typing in an input. Changelog 0.21.1.
Global "Export to ADIF" gains a third option "Choose fields…" next to the
standard-only and full-OpsLog choices, and right-clicking selected QSOs adds
"Export selected — choose fields…". The picker separates official ADIF 3.1.7
fields (grouped by category) from OpsLog/non-standard tags actually present in
the log (discovered via DistinctExtraKeys over extras_json), with All/None per
group and reset-to-defaults; the selection is persisted per user.
Backend: adif.Exporter gains a Fields allow-set that gates every promoted and
extras field in writeRecord; app.go ExportADIF/ExportADIFFiltered/
ExportADIFSelected take a fields []string param, plus new ADIFExtraFields.
rouggy