autoLogFromUDP (the inbound WSJT-X/JTDX/MSHV log path) inserted the QSO but,
unlike the manual LogQSO path, never called a.udp.EmitLoggedADIF — so a QSO
received from MSHV was not re-emitted to the outbound ADIF listeners (Log4OM,
N1MM, GridTracker…). Emit it in the same async goroutine. A pathological
self-loop is broken by the existing ±2-min dedup, which returns before the emit.
New BackupSettings.EveryExit (keyBackupEveryExit) with a Settings → Backup
checkbox. When on, the three shutdown-backup gates (plannedShutdownSteps,
runBackupForShutdown, maybeShutdownBackup) bypass the HasBackupToday /
HasADIFBackupToday "already done today" check and always run, so a second
session's QSOs are captured instead of skipped until the next day. The dated
backup file for today is refreshed (overwritten) each exit; prior days are still
kept by rotation.
A user on a slow PC with RBN saw OpsLog at 94% CPU and 8.5 GB RAM (Logger32: 3%
/ 34 MB on the same feeds). Two runaway costs under the spot firehose:
- ClusterSpotStatuses re-scanned the ENTIRE logbook (5-6 full-table maps) on
every 50 ms spot batch — ~20×/second — its "one scan regardless of batch" doc
was untrue. On a big log that's millions of row-scans/second → the pegged CPU.
Now cached in clusterStatusCache (an immutable snapshot), rebuilt only when the
logbook changes (noteWorked on a single log, invalidateAwardStats on bulk), so
it's one scan per logged QSO instead of per batch.
- The frontend spotStatus map had no cap: one entry per call|band|mode ever seen,
and RBN produces thousands of unique calls/hour → unbounded growth to GBs, plus
a full {...prev} copy 20×/second. Now pruned back to the live (SPOTS_CAP=1000)
spots once it drifts past 2×, with a cheap same-reference bail-out otherwise.
Since the logbook was split into its own SQLite file, backup.Run was still
snapshotting a.db (the settings/config database) — so the scheduled and manual
backups silently stopped including the QSOs. The operator was backing up config
and thinking it was their log.
Track the resolved logbook file path (a.logDbPath, set in connectLogbook) and
route the backup through a new runConfiguredBackup: the CONTACTS become the
primary "opslog-*" backup (the logbook file on SQLite, an ADIF export on MySQL),
and the settings/config db is snapshotted separately as "opslogcfg-*" so nothing
is lost. backup.Run takes a name prefix; the two sets rotate independently.
The follow filter correctly leaves the antenna put on an un-ticked band, but the
TX-inhibit loop ran independently: it gagged FlexRadio transmit whenever the
antenna reported "moving" (a stray polled Moving flag, or a move finishing from
the previous band), even on a band OpsLog was deliberately not managing. An
operator working 15 m on another antenna had their FT8 cut mid-transmission by
an "antenna moving" interlock.
motorTXInhibitLoop now takes the covered-band set and forces moving=false when
the current rig band isn't in it — un-ticking a band means hands off entirely:
no tune AND no inhibit. Also correct the RCU-01 references to RCU-06 (the actual
controller behind the short 11-byte status frame).
A contiguous FreqMin/FreqMax range can't drop a single band while keeping its
neighbours — so it couldn't express "40 m and 20 m yes, 30 m no" for an antenna
whose 30 m extension isn't fitted. Replace it with a Covered bands selector
(40 m–6 m) that applies to both the Ultrabeam and the SteppIR.
The follow loop and immediate re-tune now gate on band membership
(motorBandAllowed) instead of a MHz range: only bands in the operator's set are
followed, and 80 m/160 m are never followed (outside a beam's reach) regardless.
The legacy FreqMin/FreqMax is migrated to a band set on load and still
round-trips, so existing configs are unchanged. UI swaps the two number inputs
for a row of toggle chips.
The follow logic skips out-of-range frequencies only when it knows BOTH edges
of the antenna's range. The Ultrabeam path took those edges from the
controller's status frame, but an RCU-01 behind an RS232-to-Ethernet bridge
answers with the short frame that omits FreqMax → the guard saw FreqMax==0 and
disabled itself → OpsLog forwarded every rig frequency, so 80 m (un-tunable)
reached the controller, which clamped the elements down to its lowest band
(~30 m).
ubAdapter now carries the operator-configured FreqMin/FreqMax from Settings →
Antenna (like steppirAdapter already did) and uses them as a hard floor/ceiling,
falling back to the controller-reported bound only when one is left unset. This
guarantees both bounds are present so the guard actually engages. The Tunable
range editor in the Antenna panel, previously SteppIR-only, is now shown for the
Ultrabeam too, with a generic bilingual hint.
New internal/rotator/dcu1 client speaking the DCU-1 command set (AP1nnn / AM1
to go-to, AI1 to read bearing), over a serial COM port (4800 baud default) or a
raw TCP serial-over-IP bridge. Azimuth-only; Stop re-commands the current
bearing since the base set has no stop opcode.
Wired through app.go (normRotorType, default port 4001, GoTo/Heading/Stop/test
switches, park returns the same "PstRotator only" note as ARCO) and exposed in
the rotor settings as "Hy-Gain DCU-1 (RotorCard DXA, Rotor-EZ, Green Heron)"
with the ARCO's serial/TCP transport chooser and a bilingual hint. Protocol is
implemented from the standard DCU-1 spec and still needs field confirmation
against a real RotorCard DXA.
New DX Cluster setting (Settings → DX Cluster). Off (today's behaviour) a call
worked anywhere reads as already worked; on, the WORKED-call flag needs the same
band AND mode. It folds through the digital-mode grouping (Settings → General):
grouped, a 20m FT8 contact also marks a 20m FT4 spot worked; ungrouped they are
separate slots. Backend: qso.WorkedCallSlotKeys builds CALL|band and
CALL|band|mode(grouped) keys; ClusterSpotStatuses uses them when the option is on
(a spot with no inferable mode falls back to same-band).
Five operator-requested items:
- Alt+W clears the QSO entry. Handled before the `typing` guard and above
the keyer's key routing, so there is always one key that clears whatever
else is running — Esc is not that key when the CW keyer reserves it.
- The Grid box no longer pops outside the entry panel on a narrow window.
Row 2 needed 300+130+76+gaps = 538 px inside a panel whose min-width is
520, so Grid was pushed out and clipped at every narrow width, not just
extreme ones. QTH's min-width drops to 80 and the row wraps rather than
overflowing if it ever still can't fit.
- Selecting a QSO in the log now drives the Stats (F1) matrix. Uses its own
WorkedBefore call into separate state, NOT runWorkedBefore: that one owns
the entry form's wbRef and can trigger a field backfill, which browsing
the log must never do. The entry form wins whenever it holds a call.
- Clicking a coloured band/mode square lists the contacts behind it. Returns
the exact callsign AND the rest of the entity, because that pair is what
the cell's colour encodes; the call's own QSOs are bolded. The DXCC arm
matches the stored dxcc column only — reconstructing it from the callsign
here would disagree with the matrix above, which is built from that column.
- The Awards DXCC list shows each entity's primary prefix in its own sortable
column. Derived live from cty.dat into Ref.Group rather than stored on the
reference row, so an existing installation needs no re-seed.
Checking every profile made a denied call unrecoverable — the process quits
before the operator can change it, and no profile switch could get back in.
Gating on the active profile alone keeps "--profile <other>" as a way back in,
and still turns away a denied operator whose active call is the blocked one.
A tiny denylist of station callsigns, stored as SHA-256 of the base call so no
call appears in the source or the binary. Checked once at startup across every
profile; a match exits the process silently before any further wiring. Not in
the changelog.
QRZ hands back the whole logbook; a confirmation download only acts on the
QSOs QRZ marks confirmed. The old "(of 7950 returned)" read as if QRZ had
returned only a fraction of a 26k-QSO logbook. Now it states "N of M are
confirmed — the rest aren't confirmed yet", so nothing looks lost.
The LoTW/QRZ confirmation download ran on the app-lifetime context, so it
kept going after the QSL Manager was closed and a new download didn't stop the
previous one. A slow QRZ sync therefore bled its "flag cleared" log into a
freshly started LoTW download — the operator saw QRZ activity during a LoTW
run. Now each download gets a cancellable context: starting one cancels the
previous, closing the window cancels it (CancelConfirmations), and the parse
loops bail promptly on cancel. (A LoTW http 503 is separate — ARRL's server.)
No single Kenwood mode digit fits every rig for a data mode: a K3/K4 wants
DATA (MD6), a TS-590SG/TS-990S data mode is a USB modifier set on the rig,
and MD6 on a plain Kenwood is FSK/RTTY. So the operator now chooses in
Settings → CAT: USB (default), DATA (MD6), or leave the rig's mode unchanged.
Only soundcard/data modes (FT8, PSK, JT…) follow this; RTTY/FSK stays its own
native mode, and voice/CW are untouched (isKenwoodDataMode + test).
- PGXL: remote AUTH password; direct-link meter fallback (VITA-first) with
250 ms poll + peak-hold; fan mode uses bare "fanmode=" (was ignored).
- TCI: spot colour sent as decimal ARGB (ExpertSDR dropped the hex string);
spot click handled via CLICKED_ON_SPOT / RX_CLICKED_ON_SPOT to fill the entry.
- FlexRadio: clicking an OpsLog spot on the panadapter now applies the mode too.
- Filter presets: the trash icon deletes again (Radix pointer-down intercept).
- PTT hotkey: keys over CAT when a backend is active (was hijacked by a stale
Audio-tab RTS/DTR serial setting); AltGr keys allowed; presses logged.
- CW macro <LOGQSO>: logs after the preceding CW is sent, not on the first letter.
Settings -> Rotator is now a list like the amplifiers: add/remove rotors,
mix PstRotator / Rotator Genius / ARCO, and a Rotator Genius can drive both
its ports (one entry = two rotors). The compass gains a rotor selector, and
a per-rotor motorized-antenna flag so the boom/pattern paths show only for
the rotor carrying the Ultrabeam/SteppIR.
Also in this batch: a keyboard PTT hotkey (hold-to-talk or toggle, reusing
the audio PTT method with a CAT fallback), and TCI spot push to the
panadapter with click-to-fill of the callsign.
The 0.22.7/0.22.8 breakage came from a Xiegu-reported fault being fixed
inside the Yaesu and Kenwood backends. The lesson is structural: nothing
a backend does may be steered by another backend's report or another
backend's setting.
The lower-lines checkbox introduced for 0.22.9 was still one shared key
applied to both Yaesu and Kenwood — the same reflex in miniature. It is
now cat.yaesu.low_dtr_rts and cat.kenwood.low_dtr_rts, each checkbox in
its backend's own settings block, each wired only to its backend. The
shared key never shipped, so nothing needs migrating.
Both defaults break someone. 0.22.7 lowered the lines on Yaesu and
Kenwood and silenced a TS-990 whose interface needs RTS raised to
transmit; 0.22.8 stopped lowering them and an FT8 station reported its
output power wandering, cured by closing OpsLog — Windows raises both on
open and the interface reads one as PTT.
So it is now a checkbox on those two backends, off by default: that is
how they behaved before any of this. Xiegu keeps lowering them
unconditionally (its own report, its own explicit keying setting), and
the CI-V backend keeps the behaviour it has always had.
Selecting CW showed FT8 and SSB contacts. The filter ran client-side over
the reference list and nothing else, so a reference kept because it had
one CW contact still displayed the band cells it earned on SSB, still
counted its SSB confirmations, and opening it listed every contact
regardless of mode.
The class now narrows the log BEFORE the engine runs, so the bands, the
totals and the confirmations all describe the selected mode, and
AwardCellQSOs takes the same class. The panel cache is keyed by
"CODE|MODECLASS" — one key per award showed the previous mode's numbers
after switching.
The snapshot is cached by log revision, so this costs a matching pass and
no database read.
A TS-480 connected, answered ID, then never reported a state:
discarding " 000000000010000000;" while waiting for IF
connected on COM3 @ 115200 baud
cat:state → connected=false freq=0
A headless frame tail can only come from bytes that were thrown away.
ask() buffered into a local slice, so everything left after the matched
frame — including the head of a frame still arriving — went with it, and
the link could sit one answer behind its questions. The buffer now lives
on the backend, and Connect drains whatever the rig said before AI0 took
effect rather than inheriting it.
Also: the cat:state diagnostic prints RigState.Error. It read
"connected=false freq=0" and said nothing about why, so every report of a
CAT failure arrived without the one fact that explains it — the reason
only ever reached a tooltip.
New work moves to 0.22.8; 0.22.7 is released.
The cluster already answers this question for a spot; the entry panel did
not answer it for the station actually being worked. A county hunter
needs to know before the QSO ends — by the time the county shows up in
the awards table the station is long gone.
qso.CountyWorked asks about one county instead of loading the whole
worked set, narrowed to the state so it stays a few dozen rows on a
remote MySQL. It compares through award.USCountyKey on both sides rather
than in SQL, because logged spellings vary ("Los Angeles" against
"LOS ANGELES, CA") and that key function is what resolves it everywhere
else.
An empty or non-US county is not "new" but unknown, and shows nothing: a
badge on a guess is worse than no badge.
The refusal to guess was only visible in the award editor's test tab and
in the awards table — both of them places an operator goes long after the
contact is over. It has to appear while the station is still in front of
you, so ComputeQSOAwardRefs now reports the candidates it declined to
assign and the F3 panel lists them as buttons: click one and it is
written to award_refs, replacing any sibling picked for that award.
They are never auto-added — adding one would be exactly the guess the
setting exists to refuse.
Also: the dark-theme fix for the native calendar glyph named only
input[type=date], so date-time fields kept an invisible icon. All the
temporal input types now share the rule.
Reported on a Xiegu G90. With the blue programming cable — three wires, no
modem lines — CAT works perfectly. Behind a DE-19, which carries audio, CAT and
PTT, the radio went into transmit the moment OpsLog connected and stayed there.
Windows raises DTR and RTS when a serial port is opened, and the DE-19 reads
them as PTT; Xiegu's own documentation asks for both low. The CI-V backend has
dropped them since it was written, for the same reason on Icom rigs with USB
SEND mapped to a line. Xiegu, Yaesu and Kenwood did not. They do now.
The second half of the report: WSJT-X through OpsLog's rigctld decoded fine and
never transmitted. Nothing was broken in that chain — set_ptt reaches the
backend, which sends the CI-V PTT command, which a G90 ignores. That is why
Xiegu keys on a hardware line instead. The backend can now do that: Settings →
CAT → Xiegu → how the rig is keyed (CI-V / RTS / DTR).
Untested here — no G90 in reach. The operator who reported it offered to try.
A panadapter shot settles it: answering an S5 station, the replayed recording
goes out several times wider and taller than the station being answered — in WAV
as well as MP3, so this is not the encoder.
One setting served two sources that have nothing in common. A voice-keyer
message is a microphone at speaking distance and legitimately wants 195%; a QSO
recording is a receiver's line output, which is far hotter. The same 195% put it
into the transmitter flat out, ALC pinned, noise and voice alike.
The QSO playback now has its own level, defaulting to 100%. The voice keyer
keeps the setting it had, so nobody's F-key messages change.
The monitor followed the slider, but two takes made at 10% and 300% came out
identical: starting a recording re-reads the STORED settings and calls SetGains
with them, so the live value was overwritten the moment a take began.
The slider now persists as it applies. Saving Settings still works as before —
this only means the stored value is already right when a take starts, which is
what every path downstream reads.
Reported again after the monitor was wired up: 300% still sounded like 10%. The
monitor fix was right but could not show, because the sliders only changed the
settings panel's own state — the value reached the audio engine when the
operator clicked Save.
A level is set by ear, by dragging. It now applies on every move, to the monitor
and to the recorder mix alike; saving still persists it. Both halves were needed
and neither works alone.
Padlocks. LockBtn was declared INSIDE the App component, so every render gave
React a new component type and the button was unmounted and rebuilt — about four
times a second while the CAT polls. It flickered under the pointer and swallowed
clicks, because the node being clicked no longer existed when the click landed.
The padlock now lives at module level and is passed its state.
From-radio level. It reached the QSO recorder and nothing else, so an operator
listening through OpsLog heard no difference between 10% and 150% — the control
was not weak, it was disconnected. It now scales the monitor too, applied on the
captured chunk so the network-fed path keeps its own levels, and a running
monitor picks up a change immediately: making someone restart the monitor to
hear the slider is how a working control gets reported as broken.
Callsign field widened to w-56, the room coming from the RST pair which never
needs more than five characters. It is the one field always typed into, it
carries the REC badges, and a long portable call has to stay readable.
An operator emptied "Recording mic" and got "no audio output to the radio is
configured", and read it as a restriction: that a recording of the other station
alone cannot be played back. No such rule exists — the mic is an INPUT, one more
source to record, while this message is about the OUTPUT that feeds the
transmitter.
The message now names the setting exactly as the panel labels it, and the log
line carries the other two device values so the next report says which field was
actually empty.
The operator's own fetch settles it. One record, both fields:
<app_qrzlog_status:1>N <qrzcom_qso_download_status:1>Y
QRZ says the QSO is NOT confirmed and sets the download field anyway — it marks
what was handed back, not what was confirmed. OpsLog read it as a confirmation,
so eighteen QSOs came back "UPDATED" and green, none of them confirmed on QRZ.
The site's own logbook page shows them without a star.
Only app_qrzlog_status = C counts now. The test that asserted otherwise is
corrected and carries the real record.
And the download now takes back what it wrongly gave: when QRZ explicitly says
not-confirmed and our log says confirmed, the flag is cleared and reported on
its own line. These QSOs count towards award slots, so leaving them green until
someone noticed was not an option — and nothing else in the app would ever have
undone them. Only on an explicit no: a record with no app_qrzlog_status is QRZ
saying nothing, and silence is not a retraction.
Settings → FlexRadio, beside the per-band antennas and applied the same way:
when the band or the mode changes. 1.5 kW that is fine on SSB has no business
going into an FT8 signal on the same band.
Three classes rather than one row per mode, because what decides the power is
duty cycle and what the amplifier will take of it, not the mode's name — FT8 and
RTTY punish an amplifier the same way, SSB and AM do not. The classification is
pinned by a test: a digital mode sorted as phone would deliver exactly the
1.5 kW this exists to prevent.
An empty box means "leave the power alone", never zero watts, and an unknown
mode changes nothing — setting a transmit power from a name we do not recognise
is not a good guess.
Unlike the antennas, a locked band does not skip it: the lock means "do not let
the rig drag my log entry around", not "let the amplifier keep whatever the last
mode left".
"No recording was running at log time" says the take had already ended, but not
who ended it. The only path that does is the callsign being cleared — which also
happens when a clicked spot replaces it — and that path was silent.
Now it names itself, so the log shows the moment the recording was lost instead
of only its absence at the end.
Second empty recording from the same station, and this time NEITHER source had
delivered a sample — so the fix for a silent second source could not apply, and
the log still said only "recording was empty" at the end of the QSO.
Two blind spots, both now closed:
- captureStream's error was discarded. A device that cannot be opened — renamed,
unplugged, held by another program — looked exactly like one that is merely
quiet.
- A WASAPI device can open cleanly and then produce nothing at all. A DAX
channel with no stream behind it does precisely that, and it is
indistinguishable from silence until the file turns out to be empty.
A watchdog now reports both, three seconds in, and the first goes to the OPERATOR
as a toast rather than only to the log: they are mid-QSO, and by the time they
find out at save time the audio is gone for good.
"I click play and nothing happens" is what an operator sees when a function
returns an error into a promise the interface swallows. Every refusal in the
playback path is now logged as well as returned, and each names its own cause —
audio not initialised, the take still running, the take empty, the device
rejecting the file.
One of those was not even checked: playing back needs an OUTPUT device INTO the
radio, which is a different setting from the recorder's input and is very likely
unset on a station that has only ever recorded. It now refuses with that
sentence instead of failing somewhere inside the player.
CW was excluded because SmartSDR does not route the operator's own sidetone
through DAX, so the recording sounds one-sided. The audio path is open all the
same and the other station IS captured — which is the half worth keeping.
The frontend had ONE list serving two purposes: which modes may be recorded, and
which modes the voice keyer may transmit on. Adding CW to it would have let the
DVK key the rig with speech on a CW frequency. They are now two lists: PHONE_MODES
for the keyer, RECORDABLE_MODES (phone + CW) for the recorder.
Digital modes stay out of both: their audio is a modem tone nobody will replay.
Opt-in, off by default: neither service can undo it, and a local delete is not
always a statement about the world — a duplicate cleared out of a contest log
was never meant to change the DX's log.
The two APIs are not alike, and the difference decides what is possible:
- Club Log deletes by MATCH (callsign, exact timestamp, band number), so it
works for every QSO in the log, past or future. The band table is its own
list and is pinned by a test: a band mapped to the wrong number does not
fail, it points the delete at a different QSO.
- QRZ.com deletes ONLY by logid. So markExtUploaded now stores the LOGID it
already received on every upload — it was being logged and thrown away. A
QSO uploaded before this cannot be withdrawn from here at all, and the log
says so by name rather than leaving the operator to assume it worked.
Both run BEFORE the local delete, because both need the QSO's own fields to
find their copy and there is nothing left to ask with once the row is gone.
Neither can block it: the operator asked for the QSO to go, and a refusing
website is not a reason to keep it.
Two silent returns in the save path: no take was running at log time, or the
mode carries no audio worth keeping. Both simply produced no file.
An operator reporting "the sound is not in the folder" is describing an absence,
which is the same absence in either case — but they are different problems with
different fixes, and neither leaves anything behind to inspect. Now each says
which one happened, and for which callsign.
The success line already existed ("qso-rec: saved <path>"), so between the three
the log now accounts for every logged QSO.
The situation, in the operator's words: working VP2MAA, recording, and he asks
to hear his own signal. So: stop, play, and the recording is still saved with
the QSO.
Stopping FREEZES the take rather than ending it — nothing more is captured,
nothing is discarded, and logging writes the file exactly as before. Playback
reuses the voice keyer's path: same output device, same PTT keying and release
with its generation guard, so a replay cannot be cut short by a stale unkey.
Playing is refused while still recording. The transmitted audio would feed back
into the same take on any rig monitoring its own transmission, and stopping is
one click the operator has already made — it is their statement that the take is
finished, not a hoop.
The elapsed clock freezes with the recording and resumes from where it stopped,
because it now shows the LENGTH OF THE FILE rather than the time since the QSO
began. Only a fresh take returns it to zero.
A red dot in the slot the counter will occupy. Click it and the counter starts,
the dot disappears, and logging the QSO writes the file exactly as an automatic
recording would — the save path already keyed off an active take, not off the
setting.
With automatic recording disabled the capture engine is not idle, it is not
running at all, so a manual take starts it. Two consequences handled here:
- It is released again when the take ends — logged, cancelled, or dropped for
being a digital mode. An operator who records one contact does not expect
their microphone held open for the rest of the session. The release is a
deferred call at the top of the save path so every exit goes through it,
rather than one that has to be remembered at each return.
- There is no pre-roll. An automatic recording opens with the seconds BEFORE
the callsign was typed; a manual one can only begin now. The button's
tooltip says so, because otherwise the difference between two files is a
mystery to the person holding them.
The button only appears where it can work: devices configured, automatic
recording off, and a mode whose audio is worth keeping. That state is asked of
the backend rather than inferred from a preference in the interface, so the two
cannot drift apart, and it is re-read when settings are saved.
The same ASCII stream over a socket instead of a wire: ser2net, an
Ethernet-serial adapter, a Raspberry Pi at the radio. One TCP transport
presented as a serial port, so the backend keeps a single code path.
Explicitly NOT the radio's own RJ45. A TS-890 or TS-990 speaks Kenwood's
KNS/ARCP there — session, authentication, a different protocol — and that needs
one of those radios in hand to write honestly. The setting's help text says so,
because an operator who plugs in their TS-890's Ethernet port and types its
address deserves to learn that from the interface rather than from silence.
Two details that decide whether this is usable or maddening:
- A read deadline expiring is reported as "no data yet", not as an error. It
is exactly what a serial read timeout means to the caller; as an error it
would make ask() abandon a rig that is merely thinking.
- The log line names what was connected to. "connected on @ 0 baud" after a
network connect sends someone hunting a serial fault that does not exist.
The host wins over the COM port when both are filled: it is the more deliberate
setting, and silently preferring the wire leaves someone staring at an address
they typed and a radio that never answers.
Grey line — the day/night terminator and its twilight band, off by default,
redrawn every minute so a map left open all day is not silently wrong by
evening. Its own Leaflet pane below the overlays, non-interactive, so it never
hides the path or beam nor swallows a click.
The solar maths is pure and was checked against known positions before being
wired to anything: both solstices, the March equinox, the subsolar longitude at
12 UTC, and day/night at Paris, Tokyo, New York, Sydney and Reykjavik across
seasons and hemispheres. That last set is what caught the real bug: the equation
has TWO solutions per meridian and the naive branch put New York in daylight at
02:00 in December — the terminator at +63° where it belongs at −63°. A shaded
map that looks entirely plausible and is exactly mirrored. It now anchors on the
classical terminator and takes the branch nearest it, which is also what makes
the twilight band follow the terminator instead of jumping hemisphere.
Separately, from a Xiegu user: the protocol-trace checkbox does not stay ticked.
It is React state initialised to false on every mount, so a trace still running
came back unticked — the operator ticks it to "switch it on", which switches it
OFF, and the log they send contains no trace at all. Worse than a cosmetic bug:
it silently defeats the one tool asked for to diagnose their radio. Both boxes
(CAT and WinKeyer) now read their real state from the backend.
Selecting the 102 contacts of a freshly imported contest log and updating them
from QRZ.com is 102 network round trips. Nothing moved on screen while it ran,
so the only honest reading was that the application had frozen — and the natural
response to that is to kill it, halfway through.
The backend now emits a progress event per QSO and the frontend shows the same
overlay the ADIF import uses: a bar, the count, and the callsign being queried.
The callsign is reported BEFORE the lookup rather than after. With a slow
provider that is the difference between "waiting on F4BPO" and a name that lags
one QSO behind whatever is actually taking the time — which would be the field
someone stares at while deciding whether it is stuck.
The overlay is cleared by the closing event and again in a finally, so neither
a completed run nor a failed one can leave it on screen.
An operator worked the RSGB IOTA contest in another logger and got back records
carrying <STATE:5>EU005: N1MM-class software stores the received exchange in the
column its contest module uses, not the one ADIF reserves. Imported verbatim,
every QSO gains a US-state field reading "EU005" and the IOTA award sees
nothing — the reference is in the log, just not where anything looks for it.
The import dialog gains optional source → destination rows, prefilled with
STATE → IOTA since that is the case that prompted it. Applied to the RAW record
before conversion, so it works for promoted columns and Extras alike and the
destination is parsed exactly as if the file had carried it there.
Two rules, both from the same principle that the file outranks our guess:
- the source is CLEARED, so a reference does not linger in STATE where it
would show as the contacted station's US state in the grid and every export;
- a destination the file already filled is kept, judged against the record as
it ARRIVED — otherwise the result would depend on Go's map iteration order,
which is deliberately random.
The swap case in the test is what forced that second rule to be stated: "never
overwrite" and "exchange two fields" cannot both hold silently, so a destination
that is itself a mapping source is treated as an explicit swap and nothing else
is overwritten.
Two white-screen reports are open — one after logging a 10 GHz QSO, one on
starting a DVK auto-call — and neither could be investigated, for the same
reason: a render error emptied the window and left NOTHING. No line in
opslog.log, no dialog, nothing the operator could send but the words "white
screen". A fault the user cannot report is a fault that cannot be fixed.
So before hunting either trigger, the reporting path:
- An error boundary catches a render throw, writes the error and component
stack to the app log through the new LogUIError binding, and shows it on
screen — selectable, with Copy and Reload.
- Global handlers catch what a boundary cannot: throws from timers, event
handlers and rejected promises. An auto-call loop lives entirely in
callbacks, which is exactly where the second report came from, and those
leave no trace at all today.
It deliberately does not try to resume: React cannot promise sane state after a
render throw, and a half-working logger would be worse than a clear stop.
This does not fix either crash. It makes the next occurrence arrive with its
cause attached, which is the step that has been missing.
rouggy