chore: release v0.21.7

Left out as "internal", but the log is something operators read and send —
and the Flex meter removal, which is the same nature, was listed. Consistent
now.

app.go

@@ -95,9 +95,11 @@ const (
 	keyListsRSTCW      = "lists.rst_cw"
 	keyListsRSTDigital = "lists.rst_digital"
 
-	keyCATEnabled         = "cat.enabled"
+	keyCATEnabled    = "cat.enabled"
-	keyCATBackend         = "cat.backend"           // "omnirig" | "flex"
+	keyCATBackend    = "cat.backend"     // "omnirig" | "flex"
-	keyCATOmniRigNum      = "cat.omnirig.rig"       // 1 or 2
+	keyCATOmniRigNum = "cat.omnirig.rig" // 1 or 2
+	// Which VFO to believe when OmniRig names one. "" = trust the rig file.
+	keyCATOmniRigVFO      = "cat.omnirig.vfo"       // "" | "A" | "B"
 	keyCATFlexHost        = "cat.flex.host"         // FlexRadio IP (native backend)
 	keyCATFlexPort        = "cat.flex.port"         // FlexRadio TCP port (default 4992)
 	keyCATFlexSpots       = "cat.flex.spots"        // push cluster spots to the panadapter
@@ -327,9 +329,14 @@ type QSLDefaults struct {
 // CATSettings is the user-tweakable rig-control configuration. Stored as
 // individual key/value pairs to keep the settings table flat.
 type CATSettings struct {
-	Enabled         bool   `json:"enabled"`
+	Enabled    bool   `json:"enabled"`
-	Backend         string `json:"backend"`           // "omnirig" | "flex" | "icom" | "icom-net" | "tci"
+	Backend    string `json:"backend"`     // "omnirig" | "flex" | "icom" | "icom-net" | "tci"
-	OmniRigNum      int    `json:"omnirig_rig"`       // 1 or 2 (OmniRig "Rig1"/"Rig2" slot)
+	OmniRigNum int    `json:"omnirig_rig"` // 1 or 2 (OmniRig "Rig1"/"Rig2" slot)
+	// OmniRigVFO overrides which VFO OpsLog reads: "" follows what the rig file
+	// reports, "A"/"B" force one. Needed because that report is only as good as
+	// the .ini: an IC-7610 file was seen declaring VFO B permanently while the
+	// operator worked on the main VFO, so OpsLog wrote to A and read B.
+	OmniRigVFO      string `json:"omnirig_vfo"`       // "" | "A" | "B"
 	FlexHost        string `json:"flex_host"`         // FlexRadio IP (native backend)
 	FlexPort        int    `json:"flex_port"`         // FlexRadio TCP port (default 4992)
 	FlexSpots       bool   `json:"flex_spots"`        // push cluster spots to the panadapter
@@ -6266,6 +6273,22 @@ func (a *App) SaveCabrilloFile() (string, error) {
 // Errors are returned as-is to the frontend; ErrNotFound surfaces as
 // "callsign not found".
 func (a *App) LookupCallsign(callsign string) (lookup.Result, error) {
+	return a.lookupCallsign(callsign, false)
+}
+
+// LookupCallsignFresh is the same, but SKIPS the cache and refreshes it.
+//
+// For a lookup the operator asked for by clicking, in the QSO editor. The cache
+// is right for the automatic lookup that fires while typing, but it also freezes
+// a wrong answer for its whole 30-day life: an operator who upgraded their QRZ
+// subscription went on getting the thin free-account record, and deleting the
+// cached row by hand was the only way out. A deliberate click must reach the
+// provider and overwrite what was stored.
+func (a *App) LookupCallsignFresh(callsign string) (lookup.Result, error) {
+	return a.lookupCallsign(callsign, true)
+}
+
+func (a *App) lookupCallsign(callsign string, force bool) (lookup.Result, error) {
 	if a.lookup == nil {
 		return lookup.Result{}, fmt.Errorf("lookup not initialized")
 	}
@@ -6287,6 +6310,16 @@ func (a *App) LookupCallsign(callsign string) (lookup.Result, error) {
 	}
 	ctx, cancel := context.WithTimeout(a.ctx, budget)
 	defer cancel()
+	if force {
+		// A forced lookup has to reach the network, so it gets a longer leash than
+		// the type-ahead one: giving up at 2 s would just fall back to cty.dat and
+		// look like the click did nothing.
+		cancel()
+		ctx, cancel = context.WithTimeout(a.ctx, 15*time.Second)
+		defer cancel()
+		ctx = lookup.WithForce(ctx)
+		applog.Printf("lookup: FORCED (cache bypassed) for %s", strings.ToUpper(strings.TrimSpace(callsign)))
+	}
 	r, err := a.lookup.Lookup(ctx, callsign)
 	if errors.Is(err, lookup.ErrNotFound) {
 		return lookup.Result{}, fmt.Errorf("callsign not found")
@@ -6444,7 +6477,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if a.settings == nil {
 		return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault)
+	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault)
 	if err != nil {
 		return CATSettings{}, err
 	}
@@ -6492,6 +6525,9 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if out.DigitalDefault == "" {
 		out.DigitalDefault = "FT8"
 	}
+	if v := strings.ToUpper(strings.TrimSpace(m[keyCATOmniRigVFO])); v == "A" || v == "B" {
+		out.OmniRigVFO = v
+	}
 	if n, _ := strconv.Atoi(m[keyCATOmniRigNum]); n == 1 || n == 2 {
 		out.OmniRigNum = n
 	}
@@ -6560,6 +6596,7 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 		keyCATEnabled:         enabled,
 		keyCATBackend:         s.Backend,
 		keyCATOmniRigNum:      strconv.Itoa(s.OmniRigNum),
+		keyCATOmniRigVFO:      strings.ToUpper(strings.TrimSpace(s.OmniRigVFO)),
 		keyCATFlexHost:        strings.TrimSpace(s.FlexHost),
 		keyCATFlexPort:        strconv.Itoa(s.FlexPort),
 		keyCATFlexSpots:       flexSpots,
@@ -9525,7 +9562,16 @@ func (a *App) runDownloadConfirmations(svc extsvc.Service, cfg extsvc.ExternalSe
 		} else {
 			emit("Fetching QRZ.com logbook (full — no since date)…")
 		}
-		fr, err := extsvc.FetchQRZ(ctx, nil, cfg.QRZ.APIKey, "ALL")
+		// Ask QRZ for the WINDOW rather than the whole logbook. "ALL" made the
+		// server serialise every QSO — 56 MB for a 117k-record log — which it
+		// truncates mid-record, so the parse died two thirds of the way through
+		// and everything past that point was never seen. AFTER: narrows it at the
+		// source; the client-side date filter below stays as the backstop.
+		fetchOpt := "ALL"
+		if sinceDate != "" {
+			fetchOpt = "AFTER:" + sinceDate
+		}
+		fr, err := extsvc.FetchQRZ(ctx, nil, cfg.QRZ.APIKey, fetchOpt)
 		if err != nil {
 			emit("Fetch failed: " + err.Error())
 			done(matched, total)
@@ -9533,14 +9579,11 @@ func (a *App) runDownloadConfirmations(svc extsvc.Service, cfg extsvc.ExternalSe
 		}
 		adifText := fr.ADIF
 		emit(fmt.Sprintf("QRZ RESULT=%s COUNT=%s, ADIF %d bytes", fr.Result, fr.Count, len(adifText)))
-		// Persist the last-download date NOW (right after a successful fetch),
+		// The last-download date is stored at the END, and ONLY if the whole ADIF
-		// not at the end: the QRZ logbook can be huge (tens of thousands of
+		// parsed. It used to be written here, right after the fetch: when the
-		// records) and the user may close the panel mid-processing — storing it
+		// response was truncated (see above) the window advanced over records that
-		// late meant the date was never saved, so "since last download" kept
+		// were never processed, and every later run skipped them for good. A
-		// resolving to empty and re-pulled everything.
+		// window that moves past unseen data is worse than one that re-reads.
-		if a.settings != nil {
-			a.setSetting(a.profileScope()+keyExtQRZLastDownload, time.Now().UTC().Format("2006-01-02"))
-		}
 		if snip := strings.TrimSpace(adifText); snip != "" {
 			if len(snip) > 300 {
 				snip = snip[:300]
@@ -9672,10 +9715,15 @@ func (a *App) runDownloadConfirmations(svc extsvc.Service, cfg extsvc.ExternalSe
 		sort.Strings(keys)
 		emit(fmt.Sprintf("Parsed %d record(s). Fields seen: %s", parsed, strings.Join(keys, ", ")))
 		emit(fmt.Sprintf("Confirmed %d, added %d (of %d returned)", matched, added, total))
+		if perr != nil {
+			emit("The download was INCOMPLETE — QRZ.com cut the ADIF short, so the records after that point were not read.")
+			emit("The last-download date has NOT been moved, so nothing is lost: run it again (a narrower window returns less data).")
+		} else if a.settings != nil {
+			a.setSetting(a.profileScope()+keyExtQRZLastDownload, time.Now().UTC().Format("2006-01-02"))
+		}
 		if qrzSkippedOtherCall > 0 {
 			emit(fmt.Sprintf("Skipped %d QSO(s) logged under another of your callsigns (scoped to %s).", qrzSkippedOtherCall, qrzOwner))
 		}
-		// (last-download date already stored right after the fetch above)
 
 	case extsvc.ServiceEQSL:
 		sinceDate := resolveSince(keyExtEQSLLastDownload)
@@ -10290,6 +10338,31 @@ func (a *App) ReloadUDPIntegrations() []string {
 	return a.udp.Reload(a.ctx)
 }
 
+// refineGrid picks between the locator a QSO arrived with and the one the
+// callsign lookup returned.
+//
+// WSJT-X and MSHV always send a FOUR-character grid — that is all the FT8
+// protocol carries — so a QSO logged from them landed with JN05 while QRZ knew
+// JN05JG. The enrichment rule everywhere else on this path is "fill only what is
+// empty", which meant the coarse grid always won and the precise one was thrown
+// away, silently costing the operator ~100 km of accuracy on every digital QSO.
+//
+// The upgrade is only taken when the lookup grid EXTENDS the received one (same
+// first four characters). A lookup that disagrees outright — JN18 against JN05 —
+// is not a refinement: the station may be portable, and what came over the air
+// is then the better record. Case-insensitive, since ADIF grids arrive in both.
+func refineGrid(have, found string) string {
+	h := strings.ToUpper(strings.TrimSpace(have))
+	f := strings.ToUpper(strings.TrimSpace(found))
+	if h == "" {
+		return f
+	}
+	if len(f) > len(h) && strings.HasPrefix(f, h) {
+		return f
+	}
+	return h
+}
+
 // LogUDPLoggedADIF takes an ADIF blob received over UDP and inserts the
 // first record into the local logbook. Returns the ID of the inserted
 // row. Used by the auto-log handler (WSJT-X / JTDX / MSHV / JTAlert /
@@ -10357,9 +10430,7 @@ func (a *App) LogUDPLoggedADIF(adifText string) (int64, error) {
 			if q.Country == "" {
 				q.Country = lr.Country
 			}
-			if q.Grid == "" {
+			q.Grid = refineGrid(q.Grid, lr.Grid)
-				q.Grid = lr.Grid
-			}
 			if q.Continent == "" {
 				q.Continent = lr.Continent
 			}
@@ -11858,7 +11929,7 @@ func (a *App) reloadCAT() {
 		// Spawning OmniRig.exe ourselves (even with /Embedding) on every
 		// reloadCAT raised the existing instance's window to the front,
 		// which is what Log4OM avoids by relying entirely on COM activation.
-		a.cat.Start(cat.NewOmniRig(s.OmniRigNum))
+		a.cat.Start(cat.NewOmniRig(s.OmniRigNum, s.OmniRigVFO))
 	case "flex":
 		// Native FlexRadio (SmartSDR) TCP API — no OmniRig needed.
 		fb := cat.NewFlex(s.FlexHost, s.FlexPort, s.FlexSpots)

bulk_fields_test.go

@@ -0,0 +1,75 @@
+package main
+
+import (
+	"os"
+	"regexp"
+	"strings"
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// Every field the bulk-edit dialog OFFERS must be one the repository accepts.
+//
+// These two lists live in different packages — a TypeScript field table on one
+// side, a Go whitelist on the other — and they drifted apart the day the
+// confirmation dates were added: the new columns went into the QSL Manager's
+// filter whitelist instead of the bulk-edit one, so the dialog listed fields it
+// could not write and the operator got "field … is not bulk-editable" only after
+// selecting 54 QSOs and clicking Apply. Nothing in the build caught it.
+//
+// The test reads the ACTUAL field ids out of the .tsx rather than a copy, so a
+// field added to the UI alone fails here immediately.
+func TestBulkEditFieldsAreWritable(t *testing.T) {
+	src, err := os.ReadFile("frontend/src/components/BulkEditModal.tsx")
+	if err != nil {
+		t.Skipf("frontend source not available: %v", err)
+	}
+	ids := regexp.MustCompile(`\{ id: '([a-z0-9_]+)'`).FindAllStringSubmatch(string(src), -1)
+	if len(ids) < 10 {
+		t.Fatalf("only %d field ids found — the parse is wrong, not the data", len(ids))
+	}
+	for _, m := range ids {
+		id := m[1]
+		// Handled before the column map: freq takes a numeric path (freq_hz +
+		// band together) and the extras live in extras_json.
+		if id == "freq" || qso.IsBulkEditableExtra(id) {
+			continue
+		}
+		col, ok := bulkFieldColumns[id]
+		if !ok {
+			t.Errorf("bulk-edit UI offers %q, which maps to no column (bulkFieldColumns)", id)
+			continue
+		}
+		// Extras live outside the qso table (owner_callsign and friends): they are
+		// written into extras_json, not a column, so the column whitelist does not
+		// apply to them.
+		if strings.HasPrefix(col, "extras.") {
+			continue
+		}
+		if !qso.IsBulkEditable(col) && !qso.IsBulkEditableExtra(col) {
+			t.Errorf("bulk-edit UI offers %q → column %q, which the repository refuses", id, col)
+		}
+	}
+}
+
+// Same contract for the filter builder: every field it offers must be one the
+// query layer will accept.
+func TestFilterFieldsAreQueryable(t *testing.T) {
+	src, err := os.ReadFile("frontend/src/components/FilterBuilder.tsx")
+	if err != nil {
+		t.Skipf("frontend source not available: %v", err)
+	}
+	// Anchored on `type:` — the FIELDS entries carry one, the OPERATOR list does
+	// not, and without it every operator (eq, contains, …) was read as a field.
+	ids := regexp.MustCompile(`\{ value: '([a-z0-9_]+)', label: '[^']*', type:`).FindAllStringSubmatch(string(src), -1)
+	if len(ids) < 10 {
+		t.Fatalf("only %d field ids found — the parse is wrong, not the data", len(ids))
+	}
+	for _, m := range ids {
+		col := m[1]
+		if !qso.IsFilterable(col) && !qso.IsFilterableExtra(col) {
+			t.Errorf("filter builder offers %q, which the query layer refuses", col)
+		}
+	}
+}

changelog.json

@@ -1,4 +1,36 @@
 [
+  {
+    "version": "0.21.7",
+    "date": "2026-07-28",
+    "en": [
+      "The filter builder uses the same confirmation field names as bulk edit, gains the missing QRZ.com received status, and can filter on the sent and received dates (before / after).",
+      "A fresh install now starts on the dark theme. Existing installs keep the theme they are on.",
+      "A QSO logged from WSJT-X or MSHV now keeps the precise 6-character locator from QRZ/HamQTH instead of the 4-character one the digital protocol carries — about 100 km of accuracy that was being discarded on every digital QSO. A lookup that disagrees with the received square is not applied.",
+      "Edit QSO: the QRZ/HamQTH fetch button now bypasses the cache, so it really re-reads the callsign — upgrading a QRZ subscription used to change nothing until the cached entry expired a month later. It also no longer blanks an existing value when the lookup comes back with that field empty.",
+      "The diagnostic log no longer carries the FlexRadio meter readings, which drowned everything else.",
+      "OmniRig: a new \"VFO to read\" setting. OmniRig reports the active VFO from the rig file, and some files get it wrong — an IC-7610 file declared VFO B while the operator was on the main VFO, so OpsLog wrote to one VFO and read the other, and the frequency looked frozen. Force VFO A or B when that happens.",
+      "Bulk edit: fixed \"field is not bulk-editable\" on the QRZ.com received status and the confirmation dates added in 0.21.6 — they were declared in the wrong place and refused at Apply. Bulk-editing State and County, offered since the start, was refused the same way and now works.",
+      "QRZ.com confirmation download: the whole logbook was requested every time, which QRZ cuts short on a large log — the read stopped two thirds of the way through and the rest was never seen. Only the window is requested now. And the last-download date is no longer moved when the download was incomplete: it used to advance over records that had never been read, which skipped them for good.",
+      "The callsign in the top bar is now the station switcher: click it and pick a profile to activate it. Managing profiles is still there, at the bottom of the list.",
+      "The UTC clock moved from the top bar to the status bar at the bottom, beside the database.",
+      "FlexRadio panel: the built-in ATU is now controllable — Tune, Bypass, memories, and the tuner state in words (tuning, tuned, TUNE FAILED…), because a failed tune and one that never ran look identical otherwise.",
+      "Diagnostic log: each database migration now names the database it runs on, and a frequency set through OmniRig is checked again 1.5 s later — both to make a reported problem readable from the log instead of guessed at."
+    ],
+    "fr": [
+      "Le constructeur de filtres reprend les mêmes noms de champs de confirmation que l'édition en lot, gagne le statut de réception QRZ.com manquant, et permet de filtrer sur les dates d'envoi et de réception (avant / après).",
+      "Une nouvelle installation démarre désormais sur le thème sombre. Les installations existantes conservent le leur.",
+      "Un QSO enregistré depuis WSJT-X ou MSHV conserve désormais le locator précis à 6 caractères de QRZ/HamQTH au lieu de celui à 4 caractères transporté par le protocole numérique — une centaine de kilomètres de précision perdus jusqu'ici à chaque QSO numérique. Une réponse qui contredit le carré reçu n'est pas appliquée.",
+      "Édition QSO : le bouton de récupération QRZ/HamQTH contourne désormais le cache et relit donc réellement l'indicatif — passer à un abonnement QRZ payant ne changeait rien tant que l'entrée en cache n'avait pas expiré un mois plus tard. Il n'efface plus non plus une valeur existante lorsque la recherche revient sans ce champ.",
+      "Le journal de diagnostic ne contient plus les mesures des instruments FlexRadio, qui noyaient tout le reste.",
+      "OmniRig : nouveau réglage « VFO à lire ». OmniRig indique le VFO actif d'après le fichier radio, et certains fichiers se trompent — un fichier IC-7610 déclarait le VFO B alors que l'opérateur était sur le VFO principal, si bien qu'OpsLog écrivait dans l'un et lisait l'autre, et la fréquence semblait figée. Forcez le VFO A ou B le cas échéant.",
+      "Édition en lot : correction du refus « field is not bulk-editable » sur le statut de réception QRZ.com et les dates de confirmation ajoutées en 0.21.6 — ils étaient déclarés au mauvais endroit et rejetés au moment d'appliquer. L'édition en lot de State et County, proposée depuis toujours, était refusée de la même façon et fonctionne désormais.",
+      "Téléchargement des confirmations QRZ.com : le carnet entier était demandé à chaque fois, ce que QRZ tronque sur un grand log — la lecture s'arrêtait aux deux tiers et le reste n'était jamais vu. Seule la fenêtre est désormais demandée. Et la date du dernier téléchargement n'avance plus lorsque le téléchargement est incomplet : elle passait par-dessus des enregistrements jamais lus, qui étaient alors ignorés définitivement.",
+      "L'indicatif en haut de la fenêtre est désormais le sélecteur de station : un clic, on choisit un profil et il devient actif. La gestion des profils reste accessible, en bas de la liste.",
+      "L'horloge UTC est passée de la barre du haut à la barre d'état en bas, à côté de la base de données.",
+      "Panneau FlexRadio : le coupleur intégré est désormais pilotable — Accord, Bypass, mémoires, et l'état du coupleur en clair (accord en cours, accordé, ÉCHEC ACCORD…), car sans ça un accord raté et un accord jamais lancé se ressemblent.",
+      "Journal de diagnostic : chaque migration de base indique désormais sur quelle base elle tourne, et une fréquence envoyée via OmniRig est relue 1,5 s plus tard — de quoi lire un problème signalé dans le journal au lieu de le deviner."
+    ]
+  },
   {
     "version": "0.21.6",
     "date": "2026-07-27",

frontend/src/App.tsx

@@ -1,6 +1,6 @@
 import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import {
-  Activity, AlertCircle, Antenna, Bell, CheckCircle2, Clock, CloudOff, Compass, Database, Ear, Eraser, Gauge, Hash, Loader2, Lock,
+  Activity, AlertCircle, Antenna, Bell, Check, CheckCircle2, ChevronDown, Clock, CloudOff, Compass, Database, Ear, Eraser, Gauge, Hash, Loader2, Lock,
   Maximize2, Minimize2, Mic, MessageSquare, Pencil, Radio, RadioTower, RefreshCw, Satellite, Send, Settings, SlidersHorizontal, SpellCheck, Square, Terminal, Trash2, Unlock, X, Zap,
 } from 'lucide-react';
 
@@ -45,7 +45,7 @@ import {
   ChatAvailable, GetChatHistory, SendChatMessage, GetOnlineOperators,
   QSOAudioBegin, QSOAudioCancel, QSOAudioRestart, QSOAudioResetClock,
   GetAwardDefs,
-  GetUIPref, GetActiveProfile, QuitApp,
+  GetUIPref, GetActiveProfile, ListProfiles, ActivateProfile, QuitApp,
   ReportLiveActivity, LiveLastQSOAgeSec,
   GetAmpStatuses, AmpOperate,
   GetFlexState, FlexAmpOperate,
@@ -57,6 +57,9 @@ import type { adif as adifModels, lookup as lookupModels, cat as catModels } fro
 import type { QSOForm, WorkedBeforeView, StationSettingsForm, ListsSettingsForm, ModePresetForm } from '@/types';
 
 import { Menubar, type Menu } from '@/components/Menubar';
+import {
+  DropdownMenu, DropdownMenuTrigger, DropdownMenuContent, DropdownMenuItem, DropdownMenuSeparator,
+} from '@/components/ui/dropdown-menu';
 import { APP_VERSION, APP_AUTHOR } from '@/version';
 import { QSLManagerPanel } from '@/components/QSLManagerModal';
 import { QslDesignerModal } from '@/components/qsl/QslDesignerModal';
@@ -2367,7 +2370,7 @@ export default function App() {
       if (n <= 0) return;
       await refresh();
       const file = String(p?.file ?? '').replace(/^.*[\\/]/, '');
-      showToast(`ADIF: ${n} QSO imported${file ? ` from ${file}` : ''}`);
+      showToast(file ? t('adifmon.toastFrom', { n, file }) : t('adifmon.toast', { n }));
     });
     return () => { unsubDX?.(); unsubRC?.(); unsubClear?.(); unsubFlexSpot?.(); unsubProg?.(); unsubLog?.(); unsubAdifMon?.(); };
     // eslint-disable-next-line react-hooks/exhaustive-deps
@@ -2398,6 +2401,18 @@ export default function App() {
   // every profile switch; the grids take it as their React key so they remount
   // and re-read the now-correct per-profile layout.
   const [activeProfileId, setActiveProfileId] = useState<number | null>(null);
+  // The station switcher in the header needs the whole list, not just the active
+  // one. Reloaded on every profile change so a profile renamed or added in the
+  // settings shows up without a restart.
+  const [profileList, setProfileList] = useState<{ id: number; callsign: string; name: string }[]>([]);
+  const loadProfileList = useCallback(() => {
+    ListProfiles().then((ps: any) => {
+      setProfileList((Array.isArray(ps) ? ps : []).map((p: any) => ({
+        id: p.id, callsign: p.callsign ?? '', name: p.name ?? '',
+      })));
+    }).catch(() => {});
+  }, []);
+  useEffect(() => { loadProfileList(); }, [loadProfileList]);
   useEffect(() => {
     GetActiveProfile().then((p: any) => {
       if (p && p.id != null) { setGridPrefsProfile(p.id); setActiveProfileId(p.id); }
@@ -2420,7 +2435,7 @@ export default function App() {
       // Re-scope the grid column layout BEFORE the grids remount (key change).
       setGridPrefsProfile(id ?? null);
       setActiveProfileId(typeof id === 'number' ? id : null);
-      loadStation(); loadLists(); loadCATCfg(); reloadWk(); loadMainPanes();
+      loadStation(); loadLists(); loadCATCfg(); reloadWk(); loadMainPanes(); loadProfileList();
       // The chat is per shared logbook — clear the previous profile's messages
       // and reload for the new logbook (or hide if it isn't a MySQL log).
       setChatMsgs([]); chatSeen.current.clear(); setChatOnline([]); setChatUnread(0);
@@ -2428,7 +2443,7 @@ export default function App() {
       setChatEpoch((e) => e + 1);
     });
     return () => { off(); };
-  }, [loadStation, loadLists, loadCATCfg, reloadWk, loadMainPanes]);
+  }, [loadStation, loadLists, loadCATCfg, reloadWk, loadMainPanes, loadProfileList]);
   useEffect(() => {
     (async () => {
       await reloadWk();
@@ -4650,24 +4665,48 @@ export default function App() {
           ) : <span />}
           </div>
 
-          <div className="flex items-center gap-1.5 font-mono text-xs text-muted-foreground px-2.5 py-1 bg-muted rounded-md border border-border/60">
-            <Clock className="size-3" />
-            {utcNow}<span className="text-[10px]">UTC</span>
-          </div>
-
           <div className="flex items-center gap-3">
             {station.callsign ? (
-              <button
+              // Switching station is the frequent act; editing a profile is the
-                onClick={() => { setSettingsSection('profiles'); setShowSettings(true); }}
+              // rare one. The callsign used to open the settings, so changing
-                className="flex items-center gap-1.5 bg-accent border border-accent-foreground/20 text-accent-foreground px-3 py-1 rounded-full font-mono text-xs font-bold hover:bg-accent/80 transition-colors"
+              // station took four clicks and a scroll — it now IS the switcher,
-                title="Click to switch / edit profiles"
+              // with the settings kept at the bottom of the list.
-              >
+              <DropdownMenu>
-                <Antenna className="size-3" />
+                <DropdownMenuTrigger asChild>
-                {station.callsign}
+                  <button
-                {station.my_grid && (
+                    className="flex items-center gap-1.5 bg-accent border border-accent-foreground/20 text-accent-foreground px-3 py-1 rounded-full font-mono text-xs font-bold hover:bg-accent/80 transition-colors"
-                  <span className="bg-card/60 px-1.5 rounded text-[11px] text-primary">{station.my_grid}</span>
+                    title={t('prof.switchTitle')}
-                )}
+                  >
-              </button>
+                    <Antenna className="size-3" />
+                    {station.callsign}
+                    {station.my_grid && (
+                      <span className="bg-card/60 px-1.5 rounded text-[11px] text-primary">{station.my_grid}</span>
+                    )}
+                    <ChevronDown className="size-3 opacity-70" />
+                  </button>
+                </DropdownMenuTrigger>
+                <DropdownMenuContent align="end" className="min-w-56">
+                  {profileList.map((p) => (
+                    <DropdownMenuItem
+                      key={p.id}
+                      disabled={p.id === activeProfileId}
+                      onSelect={() => { if (p.id !== activeProfileId) ActivateProfile(p.id).catch((e: any) => setError(String(e?.message ?? e))); }}
+                    >
+                      <span className="flex items-center gap-2 min-w-0">
+                        {p.id === activeProfileId
+                          ? <Check className="size-3.5 shrink-0 text-primary" />
+                          : <span className="size-3.5 shrink-0" />}
+                        <span className="font-mono font-semibold">{p.callsign || '—'}</span>
+                        {p.name && <span className="text-muted-foreground truncate">{p.name}</span>}
+                      </span>
+                    </DropdownMenuItem>
+                  ))}
+                  <DropdownMenuSeparator />
+                  <DropdownMenuItem onSelect={() => { setSettingsSection('profiles'); setShowSettings(true); }}>
+                    {t('prof.manage')}
+                  </DropdownMenuItem>
+                </DropdownMenuContent>
+              </DropdownMenu>
             ) : (
               <Button variant="outline" size="sm" onClick={() => setShowSettings(true)}>
                 <Settings className="size-3.5" /> Set station
@@ -5368,27 +5407,27 @@ export default function App() {
                     : 'bg-success-muted border-success-border text-success-muted-foreground',
                 )}>
                   <div className="flex items-center gap-3 flex-wrap">
-                    <strong>Import complete.</strong>
+                    <strong>{t('imp.complete')}</strong>
-                    <Badge variant="outline" className="bg-card/60 font-mono text-success border-success-border">{importResult.imported} imported</Badge>
+                    <Badge variant="outline" className="bg-card/60 font-mono text-success border-success-border">{t('imp.imported', { n: importResult.imported })}</Badge>
                     {importResult.updated > 0 && (
-                      <Badge variant="outline" className="bg-card/60 font-mono text-info border-info-border">{importResult.updated} updated</Badge>
+                      <Badge variant="outline" className="bg-card/60 font-mono text-info border-info-border">{t('imp.updated', { n: importResult.updated })}</Badge>
                     )}
                     {importResult.duplicates > 0 && (
-                      <Badge variant="outline" className="bg-card/60 font-mono text-info border-info-border">{importResult.duplicates} duplicates</Badge>
+                      <Badge variant="outline" className="bg-card/60 font-mono text-info border-info-border">{t('imp.duplicates', { n: importResult.duplicates })}</Badge>
                     )}
-                    <Badge variant="outline" className="bg-card/60 font-mono text-warning border-warning-border">{importResult.skipped} skipped</Badge>
+                    <Badge variant="outline" className="bg-card/60 font-mono text-warning border-warning-border">{t('imp.skipped', { n: importResult.skipped })}</Badge>
-                    <Badge variant="outline" className="bg-card/60 font-mono">{importResult.total} total</Badge>
+                    <Badge variant="outline" className="bg-card/60 font-mono">{t('imp.total', { n: importResult.total })}</Badge>
                     {importResult.duplicates > 0 && importResult.duplicate_samples && importResult.duplicate_samples.length > 0 && (
                       <button className="underline text-xs" onClick={() => setImportDupsOpen((v) => !v)}>
-                        {importDupsOpen ? 'Hide' : 'Show'} duplicates
+                        {importDupsOpen ? t('imp.hideDups') : t('imp.showDups')}
                         {importResult.duplicates > importResult.duplicate_samples.length
-                          ? ` (first ${importResult.duplicate_samples.length} of ${importResult.duplicates})`
+                          ? t('imp.dupsFirst', { shown: importResult.duplicate_samples.length, total: importResult.duplicates })
                           : ''}
                       </button>
                     )}
                     {importResult.errors && importResult.errors.length > 0 && (
                       <button className="underline text-xs" onClick={() => setImportErrorsOpen((v) => !v)}>
-                        {importErrorsOpen ? 'Hide' : 'Show'} {importResult.errors.length} error{importResult.errors.length > 1 ? 's' : ''}
+                        {importErrorsOpen ? t('imp.hideErrors', { n: importResult.errors.length }) : t('imp.showErrors', { n: importResult.errors.length })}
                       </button>
                     )}
                     <button className="ml-auto" onClick={() => setImportResult(null)}><X className="size-4" /></button>
@@ -5930,6 +5969,13 @@ export default function App() {
                 </>
               )}
             </div>
+            {/* UTC clock — moved out of the header, where it competed with the
+                frequency for the eye. It belongs with the other passive
+                indicators. */}
+            <span className="inline-flex items-center gap-1 font-mono text-[11px] text-muted-foreground shrink-0" title="UTC">
+              <Clock className="size-3" />
+              {utcNow}<span className="text-[9px]">Z</span>
+            </span>
             {dbConn && (
               <button
                 type="button"
@@ -6113,19 +6159,19 @@ export default function App() {
         <Dialog open onOpenChange={(o) => { if (!o) setPendingImportPath(null); }}>
           <DialogContent className="max-w-lg px-6">
             <DialogHeader className="px-2">
-              <DialogTitle>Import ADIF</DialogTitle>
+              <DialogTitle>{t('imp.dialogTitle')}</DialogTitle>
               <DialogDescription className="text-xs break-all">
                 {pendingImportPath}
               </DialogDescription>
             </DialogHeader>
             <div className="py-2 px-2 space-y-2">
               <div className="text-xs text-muted-foreground">
-                Duplicate = same <span className="font-medium text-foreground">callsign + UTC minute + band + mode</span> as a QSO already in the log.
+                {t('imp.dupHintPre')}<span className="font-medium text-foreground">{t('imp.dupHintKey')}</span>{t('imp.dupHintPost')}
               </div>
               {([
-                { id: 'skip', title: 'Skip duplicates', desc: 'Leave existing QSOs untouched, only add new ones. Safe default.' },
+                { id: 'skip', title: t('imp.skipTitle'), desc: t('imp.skipDesc') },
-                { id: 'update', title: 'Update duplicates', desc: 'Refresh existing QSOs with this file — merges its non-empty fields (QSL/LoTW/eQSL/QRZ statuses & dates, etc.) onto the matching QSO. Use this to re-sync from Log4OM or LoTW. Fields the file omits are kept.' },
+                { id: 'update', title: t('imp.updateTitle'), desc: t('imp.updateDesc') },
-                { id: 'all', title: 'Import everything', desc: 'Insert every record, duplicates included. For intentionally merging two overlapping logs.' },
+                { id: 'all', title: t('imp.allTitle'), desc: t('imp.allDesc') },
               ] as const).map((o) => (
                 <button
                   key={o.id}
@@ -6153,9 +6199,9 @@ export default function App() {
                   className="mt-0.5"
                 />
                 <span>
-                  Fix country &amp; zones (cty.dat + ClubLog)
+                  {t('imp.ctyTitle')}
                   <span className="block text-xs text-muted-foreground mt-0.5">
-                    Recompute Country, DXCC &amp; CQ/ITU zones from cty.dat, overriding the file — corrects what contest software exports wrong (e.g. RG2Y as Asiatic instead of European Russia). ClubLog's DXpedition overrides are applied on top per QSO date (e.g. TO974REF → Reunion, TO2A 2012 → French Guiana) whenever the ClubLog data is downloaded. Everything else in the ADIF is kept as-is. Tip: use <strong>Update duplicates</strong> to re-fix QSOs already in your log.
+                    {t('imp.ctyDesc')}
                   </span>
                 </span>
               </label>
@@ -6166,16 +6212,16 @@ export default function App() {
                   className="mt-0.5"
                 />
                 <span>
-                  Fill my station fields from my profile
+                  {t('imp.stationTitle')}
                   <span className="block text-xs text-muted-foreground mt-0.5">
-                    Backfill <strong>empty</strong> MY_* fields (my grid, rig, antenna, address, city, state, county, SOTA/POTA ref, TX power…) plus <strong>Operator</strong> and <strong>Owner callsign</strong> from your active profile. Existing values are kept. Only <strong>STATION_CALLSIGN</strong> is left untouched so a mixed-call log isn't re-routed. Enable when importing <em>your own</em> log.
+                    {t('imp.stationDesc')}
                   </span>
                 </span>
               </label>
             </div>
             <DialogFooter className="px-2 bg-transparent border-t-0">
-              <Button variant="outline" onClick={() => setPendingImportPath(null)}>Cancel</Button>
+              <Button variant="outline" onClick={() => setPendingImportPath(null)}>{t('imp.cancel')}</Button>
-              <Button onClick={runImport}>Import</Button>
+              <Button onClick={runImport}>{t('imp.import')}</Button>
             </DialogFooter>
           </DialogContent>
         </Dialog>
@@ -6185,7 +6231,7 @@ export default function App() {
         <Dialog open>
           <DialogContent className="max-w-sm px-6" hideClose>
             <DialogHeader className="px-2">
-              <DialogTitle>Importing ADIF…</DialogTitle>
+              <DialogTitle>{t('imp.progressTitle')}</DialogTitle>
             </DialogHeader>
             <div className="px-2 pb-4 space-y-2">
               {(() => {
@@ -6202,8 +6248,8 @@ export default function App() {
                     </div>
                     <div className="text-xs text-muted-foreground text-center font-mono">
                       {tot > 0
-                        ? `${done.toLocaleString()} / ${tot.toLocaleString()} records · ${pct}%`
+                        ? t('imp.progressCount', { done: done.toLocaleString(), tot: tot.toLocaleString(), pct })
-                        : `${done.toLocaleString()} records…`}
+                        : t('imp.progressCountOnly', { done: done.toLocaleString() })}
                     </div>
                   </>
                 );

frontend/src/components/FilterBuilder.tsx

@@ -26,7 +26,9 @@ export interface QueryFilter {
 
 // Curated field catalog. `value` MUST match a column in the backend whitelist
 // (qso.FilterableFields); `type` only drives which operators/value input we show.
-type FieldType = 'text' | 'number' | 'date';
+// 'date' is an ISO timestamp column (qso_date); 'adifdate' is an ADIF YYYYMMDD
+// string (the confirmation dates) — picked with a calendar, stored 8-digit.
+type FieldType = 'text' | 'number' | 'date' | 'adifdate';
 const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'callsign', label: 'fltb.fCallsign', type: 'text' },
   { value: 'qso_date', label: 'fltb.fDate', type: 'date' },
@@ -57,16 +59,30 @@ const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'wwff_ref', label: 'fltb.fWwff', type: 'text' },
   { value: 'rig', label: 'fltb.fRig', type: 'text' },
   { value: 'ant', label: 'fltb.fAntenna', type: 'text' },
+  // Same naming as the bulk editor: each entry says whether it is a STATUS or a
+  // DATE and in which direction, grouped by channel. "Upload" was wrong for half
+  // of them — a paper QSL is not uploaded.
   { value: 'qsl_sent', label: 'fltb.fQslSent', type: 'text' },
+  { value: 'qsl_sent_date', label: 'fltb.fQslSentDate', type: 'adifdate' },
   { value: 'qsl_rcvd', label: 'fltb.fQslRcvd', type: 'text' },
+  { value: 'qsl_rcvd_date', label: 'fltb.fQslRcvdDate', type: 'adifdate' },
   { value: 'qsl_via', label: 'fltb.fQslVia', type: 'text' },
   { value: 'lotw_sent', label: 'fltb.fLotwSent', type: 'text' },
+  { value: 'lotw_sent_date', label: 'fltb.fLotwSentDate', type: 'adifdate' },
   { value: 'lotw_rcvd', label: 'fltb.fLotwRcvd', type: 'text' },
+  { value: 'lotw_rcvd_date', label: 'fltb.fLotwRcvdDate', type: 'adifdate' },
   { value: 'eqsl_sent', label: 'fltb.fEqslSent', type: 'text' },
+  { value: 'eqsl_sent_date', label: 'fltb.fEqslSentDate', type: 'adifdate' },
   { value: 'eqsl_rcvd', label: 'fltb.fEqslRcvd', type: 'text' },
-  { value: 'qrzcom_qso_upload_status', label: 'fltb.fQrzUpload', type: 'text' },
+  { value: 'eqsl_rcvd_date', label: 'fltb.fEqslRcvdDate', type: 'adifdate' },
-  { value: 'clublog_qso_upload_status', label: 'fltb.fClublogUpload', type: 'text' },
+  { value: 'qrzcom_qso_upload_status', label: 'fltb.fQrzSent', type: 'text' },
-  { value: 'hrdlog_qso_upload_status', label: 'fltb.fHrdlogUpload', type: 'text' },
+  { value: 'qrzcom_qso_upload_date', label: 'fltb.fQrzSentDate', type: 'adifdate' },
+  { value: 'qrzcom_qso_download_status', label: 'fltb.fQrzRcvd', type: 'text' },
+  { value: 'qrzcom_qso_download_date', label: 'fltb.fQrzRcvdDate', type: 'adifdate' },
+  { value: 'clublog_qso_upload_status', label: 'fltb.fClublogSent', type: 'text' },
+  { value: 'clublog_qso_upload_date', label: 'fltb.fClublogSentDate', type: 'adifdate' },
+  { value: 'hrdlog_qso_upload_status', label: 'fltb.fHrdlogSent', type: 'text' },
+  { value: 'hrdlog_qso_upload_date', label: 'fltb.fHrdlogSentDate', type: 'adifdate' },
   { value: 'contest_id', label: 'fltb.fContestId', type: 'text' },
   { value: 'srx', label: 'fltb.fSerialRcvd', type: 'number' },
   { value: 'stx', label: 'fltb.fSerialSent', type: 'number' },
@@ -112,6 +128,8 @@ const NUM_OPS: FilterOp[] = ['eq', 'ne', 'gt', 'lt', 'ge', 'le', 'empty', 'notem
 
 function opsFor(field: string): { value: FilterOp; label: string }[] {
   const t = FIELDS.find((f) => f.value === field)?.type ?? 'text';
+  // 'adifdate' is stored as a string but sorts chronologically, so it takes the
+  // comparison operators (before/after), not the text ones.
   const allow = t === 'text' ? TEXT_OPS : NUM_OPS;
   return OPS.filter((o) => allow.includes(o.value));
 }
@@ -253,12 +271,19 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
                   </SelectContent>
                 </Select>
                 <Input
-                  type={fieldType === 'date' ? 'date' : fieldType === 'number' ? 'number' : 'text'}
+                  // An ADIF date is picked with a calendar but STORED as the
+                  // 8-digit form the column holds, so the comparison stays a
+                  // plain string one on both sides.
+                  type={fieldType === 'date' || fieldType === 'adifdate' ? 'date' : fieldType === 'number' ? 'number' : 'text'}
                   className="h-8 flex-1 text-xs"
                   disabled={!needsValue}
                   placeholder={needsValue ? (fieldType === 'date' ? 'YYYY-MM-DD' : t('fltb.valuePh')) : '—'}
-                  value={c.value}
+                  value={fieldType === 'adifdate' && /^d{8}$/.test(c.value)
-                  onChange={(e) => setCond(i, { value: e.target.value })}
+                    ? `${c.value.slice(0, 4)}-${c.value.slice(4, 6)}-${c.value.slice(6, 8)}`
+                    : c.value}
+                  onChange={(e) => setCond(i, {
+                    value: fieldType === 'adifdate' ? e.target.value.replace(/-/g, '') : e.target.value,
+                  })}
                   onKeyDown={(e) => { if (e.key === 'Enter') apply(); }}
                 />
                 <button type="button" onClick={() => removeCond(i)} className="text-muted-foreground hover:text-destructive shrink-0" title={t('fltb.remove')}>

frontend/src/components/FlexPanel.tsx

@@ -1,7 +1,7 @@
 import { useEffect, useRef, useState } from 'react';
 import { Radio, Zap, Power, AudioLines, Flame, Gauge, Volume2, VolumeX, ChevronDown, SlidersHorizontal } from 'lucide-react';
 import {
-  GetFlexState, FlexSetPower, FlexSetTunePower, FlexTune, FlexSetVox, FlexSetVoxLevel, FlexSetVoxDelay,
+  GetFlexState, FlexATUStart, FlexATUBypass, FlexSetATUMemories, FlexSetPower, FlexSetTunePower, FlexTune, FlexSetVox, FlexSetVoxLevel, FlexSetVoxDelay,
   FlexSetProcessor, FlexSetProcessorLevel, FlexSetMon, FlexSetMonLevel, FlexSetMic,
   FlexMox, FlexAmpOperate,
   GetPGXLStatus, PGXLSetFanMode,
@@ -125,8 +125,8 @@ function Segmented({ value, options, onChange, disabled }: {
 }
 
 // Chip — a compact on/off pill (NB/NR/ANF/VOX/MON…).
-function Chip({ on, onClick, label, disabled, accent = 'emerald' }: {
+function Chip({ on, onClick, label, disabled, accent = 'emerald', title }: {
-  on: boolean; onClick: () => void; label: string; disabled?: boolean; accent?: 'emerald' | 'violet' | 'cyan' | 'amber';
+  on: boolean; onClick: () => void; label: string; disabled?: boolean; accent?: 'emerald' | 'violet' | 'cyan' | 'amber'; title?: string;
 }) {
   const onCls = {
     emerald: 'bg-success border-success text-success-foreground',
@@ -135,7 +135,7 @@ function Chip({ on, onClick, label, disabled, accent = 'emerald' }: {
     amber: 'bg-warning border-warning text-warning-foreground',
   }[accent];
   return (
-    <button type="button" onClick={onClick} disabled={disabled}
+    <button type="button" onClick={onClick} disabled={disabled} title={title}
       className={cn(
         // min width (not fixed) so a longer label like STONE keeps symmetric
         // padding instead of overflowing; short labels (NB/NR/APF) stay aligned.
@@ -146,6 +146,37 @@ function Chip({ on, onClick, label, disabled, accent = 'emerald' }: {
   );
 }
 
+// SmartSDR reports the tuner as an enum. It is worth decoding rather than
+// showing raw: TUNE_FAIL and "never tuned" both leave the radio looking normal,
+// and the operator transmits into a bad match either way.
+function atuLabel(status: string | undefined, t: (k: string) => string): string {
+  switch ((status || '').toUpperCase()) {
+    case 'TUNE_IN_PROGRESS':   return t('flxp.atuTuning');
+    case 'TUNE_SUCCESSFUL':
+    case 'TUNE_OK':            return t('flxp.atuOk');
+    case 'TUNE_FAIL':
+    case 'TUNE_FAIL_BYPASS':   return t('flxp.atuFail');
+    case 'TUNE_BYPASS':
+    case 'TUNE_MANUAL_BYPASS': return t('flxp.atuBypassed');
+    case 'TUNE_ABORTED':       return t('flxp.atuAborted');
+    case 'TUNE_NOT_STARTED':
+    case 'NONE':
+    case '':                   return t('flxp.atuIdle');
+    default:                   return status || '';
+  }
+}
+
+function atuTone(status: string | undefined): string {
+  switch ((status || '').toUpperCase()) {
+    case 'TUNE_SUCCESSFUL':
+    case 'TUNE_OK':            return 'text-success';
+    case 'TUNE_FAIL':
+    case 'TUNE_FAIL_BYPASS':   return 'text-danger';
+    case 'TUNE_IN_PROGRESS':   return 'text-warning';
+    default:                   return 'text-muted-foreground';
+  }
+}
+
 function LevelRow({ label, on, onToggle, value, onLevel, disabled, accent, sliderAccent }: {
   label: string; on: boolean; onToggle: () => void; value: number; onLevel: (v: number) => void;
   disabled?: boolean; accent?: 'emerald' | 'violet' | 'cyan' | 'amber'; sliderAccent?: string;
@@ -624,6 +655,33 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
               )}
             </div>
 
+            {/* ATU — the radio's built-in tuner. Sits under TUNE because that is
+                the order of operations: the tuner needs a carrier to measure
+                against, so TUNE first, then start a tuning cycle. */}
+            <div className="flex items-center gap-2 border-t border-border/60 pt-3">
+              <span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">ATU</span>
+              <button type="button" disabled={off}
+                title={t('flxp.atuTuneHint')}
+                onClick={() => FlexATUStart().catch(() => {})}
+                className="px-3 py-1.5 rounded-lg text-xs font-extrabold tracking-wide border-2 border-warning text-warning bg-card hover:bg-warning-muted transition-all disabled:opacity-30">
+                {t('flxp.atuTune')}
+              </button>
+              <button type="button" disabled={off}
+                title={t('flxp.atuBypassHint')}
+                onClick={() => FlexATUBypass().catch(() => {})}
+                className="px-3 py-1.5 rounded-lg text-xs font-extrabold tracking-wide border-2 border-border text-muted-foreground bg-card hover:bg-muted transition-all disabled:opacity-30">
+                {t('flxp.atuBypass')}
+              </button>
+              <Chip on={st.atu_memories} disabled={off} label={t('flxp.atuMem')} accent="cyan"
+                title={t('flxp.atuMemHint')}
+                onClick={() => change('atu_memories', !st.atu_memories, () => FlexSetATUMemories(!st.atu_memories))} />
+              {/* The status is the whole point: a tune that FAILED and one that
+                  never ran look identical on the radio's own front panel. */}
+              <span className={cn('ml-auto text-[11px] font-mono font-semibold whitespace-nowrap', atuTone(st.atu_status))}>
+                {atuLabel(st.atu_status, t)}
+              </span>
+            </div>
+
 
             {!isCW ? (
             <div className="border-t border-border/60 pt-3 space-y-3">

frontend/src/components/QSOEditModal.tsx

@@ -1,6 +1,6 @@
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Trash2, Search, Loader2, CalendarDays } from 'lucide-react';
-import { LookupCallsign, DXCCForCountry, GetAwardDefs, ComputeQSOAwardRefs, GetListsSettings } from '../../wailsjs/go/main/App';
+import { LookupCallsign, LookupCallsignFresh, DXCCForCountry, GetAwardDefs, ComputeQSOAwardRefs, GetListsSettings } from '../../wailsjs/go/main/App';
 import { rstOptions, type RSTLists } from '@/lib/rst';
 import { AwardRefSelector } from '@/components/AwardRefSelector';
 import { AdifExtrasEditor } from '@/components/AdifExtrasEditor';
@@ -330,19 +330,28 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
     setLooking(true);
     setLocalErr('');
     try {
-      const r: any = await LookupCallsign(call);
+      // FRESH: this fetch is a deliberate click, so it bypasses the cache and
+      // refreshes it. A cached answer from a thinner QRZ subscription (or any
+      // stale row) otherwise stayed for its whole 30-day life and the button
+      // appeared to do nothing.
+      const r: any = await LookupCallsignFresh(call);
+      // The lookup WINS over what is in the record — that is the point of asking
+      // for it. But an EMPTY result must never blank a good value: `??` only
+      // guards against null, and Go marshals an unset string as "", so a QRZ
+      // record with no grid used to wipe the grid that was already there.
+      const keep = (found: any, cur: any) => (found === undefined || found === null || found === '' ? cur : found);
       setDraft((d) => ({
         ...d,
-        name: r.name ?? d.name,
+        name: keep(r.name, d.name),
-        qth: r.qth ?? d.qth,
+        qth: keep(r.qth, d.qth),
-        address: r.address ?? (d as any).address,
+        address: keep(r.address, (d as any).address),
-        email: r.email ?? (d as any).email,
+        email: keep(r.email, (d as any).email),
-        country: r.country ?? d.country,
+        country: keep(r.country, d.country),
-        grid: r.grid ?? d.grid,
+        grid: keep(r.grid, d.grid),
-        state: r.state ?? d.state,
+        state: keep(r.state, d.state),
-        cnty: r.cnty ?? d.cnty,
+        cnty: keep(r.cnty, d.cnty),
-        cont: r.cont ?? d.cont,
+        cont: keep(r.cont, d.cont),
-        qsl_via: r.qsl_via ?? d.qsl_via,
+        qsl_via: keep(r.qsl_via, d.qsl_via),
         dxcc: r.dxcc || d.dxcc,
         cqz: r.cqz || d.cqz,
         ituz: r.ituz || d.ituz,

frontend/src/components/SettingsModal.tsx

@@ -1052,7 +1052,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   const [bandDraft, setBandDraft] = useState('');
   const [modeDraft, setModeDraft] = useState('');
   const [catCfg, setCatCfg] = useState<CATSettings>({
-    enabled: false, backend: 'omnirig', omnirig_rig: 1, flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120,
+    enabled: false, backend: 'omnirig', omnirig_rig: 1, omnirig_vfo: '', flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120,
     icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0,
     digital_default: 'FT8',
@@ -2334,6 +2334,21 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
               </Select>
             </div>
             )}
+            {catCfg.backend === 'omnirig' && (
+            <div className="space-y-1">
+              <Label>{t('cat.omnirigVfo')}</Label>
+              <Select value={catCfg.omnirig_vfo || 'auto'}
+                onValueChange={(v) => setCatCfg((s) => ({ ...s, omnirig_vfo: v === 'auto' ? '' : v }))}>
+                <SelectTrigger><SelectValue /></SelectTrigger>
+                <SelectContent>
+                  <SelectItem value="auto">{t('cat.omnirigVfoAuto')}</SelectItem>
+                  <SelectItem value="A">{t('cat.omnirigVfoA')}</SelectItem>
+                  <SelectItem value="B">{t('cat.omnirigVfoB')}</SelectItem>
+                </SelectContent>
+              </Select>
+              <p className="text-[10px] text-muted-foreground">{t('cat.omnirigVfoHint')}</p>
+            </div>
+            )}
             {catCfg.backend === 'flex' && (
             <>
               <div className="space-y-1">

frontend/src/lib/theme.tsx

@@ -14,7 +14,11 @@ export const CONCRETE_THEMES: Exclude<ThemeChoice, 'auto'>[] = [
 ];
 
 export const LS_KEY = 'opslog.theme';
-const DEFAULT: ThemeChoice = 'light-warm';
+// A fresh install starts DARK. A shack is usually a dim room and the screen is
+// looked at for hours; every other logger defaults the same way. Graphite
+// specifically, because that is what 'auto' already resolves to for a dark
+// system — so the two paths agree instead of landing on different darks.
+const DEFAULT: ThemeChoice = 'dark-graphite';
 const ALL: ThemeChoice[] = ['auto', ...CONCRETE_THEMES];
 
 function systemDark(): boolean {

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.21.6';
+export const APP_VERSION = '0.21.7';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -637,6 +637,8 @@ export function LogUDPLoggedADIF(arg1:string):Promise<number>;
 
 export function LookupCallsign(arg1:string):Promise<lookup.Result>;
 
+export function LookupCallsignFresh(arg1:string):Promise<lookup.Result>;
+
 export function MotorReadElements():Promise<Array<number>>;
 
 export function MotorSetElement(arg1:number,arg2:number):Promise<void>;

frontend/wailsjs/go/main/App.js

@@ -1222,6 +1222,10 @@ export function LookupCallsign(arg1) {
   return window['go']['main']['App']['LookupCallsign'](arg1);
 }
 
+export function LookupCallsignFresh(arg1) {
+  return window['go']['main']['App']['LookupCallsignFresh'](arg1);
+}
+
 export function MotorReadElements() {
   return window['go']['main']['App']['MotorReadElements']();
 }

frontend/wailsjs/go/models.ts

@@ -1829,6 +1829,7 @@ export namespace main {
 	    enabled: boolean;
 	    backend: string;
 	    omnirig_rig: number;
+	    omnirig_vfo: string;
 	    flex_host: string;
 	    flex_port: number;
 	    flex_spots: boolean;
@@ -1857,6 +1858,7 @@ export namespace main {
 	        this.enabled = source["enabled"];
 	        this.backend = source["backend"];
 	        this.omnirig_rig = source["omnirig_rig"];
+	        this.omnirig_vfo = source["omnirig_vfo"];
 	        this.flex_host = source["flex_host"];
 	        this.flex_port = source["flex_port"];
 	        this.flex_spots = source["flex_spots"];

internal/cat/flex.go

@@ -50,7 +50,6 @@ type Flex struct {
 	meterMeta      map[int]meterInfo
 	meterVal       map[int]float64
 	meterSub       map[int]bool // ids we've already sent "sub meter <id>" for
-	meterLogAt     time.Time    // throttle for value logging
 	vitaSeen       int          // count of UDP datagrams (first few logged for diag)
 	meterRawLogged bool         // log the first raw meter-definition status once
 	txRawLogged    bool         // log the first raw transmit status once (field-name audit)
@@ -768,11 +767,17 @@ func (f *Flex) handleStatus(payload string) {
 				f.meterMeta[num] = old
 			}
 			f.mu.Unlock()
+			// One line for the whole batch, not one per meter: a Flex announces
+			// dozens at connect and that was a wall of text every time.
+			var names []string
 			for _, id := range newIDs {
 				mi := f.meterMeta[id]
-				debugLog.Printf("Flex: meter def #%d %s/%s unit=%s lo=%g hi=%g → sub", id, mi.src, mi.name, mi.unit, mi.lo, mi.hi)
+				names = append(names, nonEmpty(mi.name, strconv.Itoa(id)))
 				f.subscribeMeter(id)
 			}
+			if len(names) > 0 {
+				debugLog.Printf("Flex: subscribed to %d meter(s): %s", len(names), strings.Join(names, " "))
+			}
 		}
 		// Spot status: "spot <index> …". Track the index so we can clear the
 		// panadapter, and log it verbatim — a click on a panadapter spot pushes a
@@ -2154,15 +2159,6 @@ func (f *Flex) parseVita(p []byte, seen int) {
 		raw := int16(binary.BigEndian.Uint16(payload[i+2 : i+4]))
 		f.meterVal[id] = scaleMeter(raw, f.meterMeta[id].unit)
 	}
-	if time.Since(f.meterLogAt) > 5*time.Second { // throttled dump to validate names
-		f.meterLogAt = time.Now()
-		var b strings.Builder
-		for id, v := range f.meterVal {
-			mi := f.meterMeta[id]
-			fmt.Fprintf(&b, "%s=%.1f%s ", nonEmpty(mi.name, strconv.Itoa(id)), v, mi.unit)
-		}
-		debugLog.Printf("Flex: meters %s", strings.TrimSpace(b.String()))
-	}
 	f.mu.Unlock()
 }
 

internal/cat/omnirig.go

@@ -29,6 +29,14 @@ const (
 type OmniRig struct {
 	RigNum int // 1 (Rig1) or 2 (Rig2)
 
+	// ForceVFO overrides which VFO to read: "" trusts the rig file, "A"/"B" do
+	// not. OmniRig's VFO report is only as good as the .ini behind it, and a
+	// wrong one is invisible: an IC-7610 file was seen declaring VFO B while the
+	// operator worked on the main VFO, so OpsLog wrote to A (SetSimplexMode acts
+	// on the main VFO) and read B — the frequency "never followed the knob",
+	// while it was following the other one all along.
+	ForceVFO string
+
 	omnirig *ole.IDispatch
 	rig     *ole.IDispatch
 	lastSig string // last logged Split/VFO signature — only log on change
@@ -59,14 +67,24 @@ type OmniRig struct {
 	splitFlaky      bool
 	splitFlips      int
 	splitFlipWindow time.Time
+
+	// pendingReadback schedules one delayed frequency log after a Set — see
+	// SetFrequency. Zero when nothing is pending.
+	pendingReadback time.Time
 }
 
 // NewOmniRig creates a non-connected backend. Call Connect before use.
-func NewOmniRig(rigNum int) *OmniRig {
+// NewOmniRig builds the backend. forceVFO is "" to follow whatever the rig file
+// reports, or "A"/"B" to override it — see the ForceVFO field.
+func NewOmniRig(rigNum int, forceVFO string) *OmniRig {
 	if rigNum < 1 || rigNum > 2 {
 		rigNum = 1
 	}
-	return &OmniRig{RigNum: rigNum}
+	v := strings.ToUpper(strings.TrimSpace(forceVFO))
+	if v != "A" && v != "B" {
+		v = ""
+	}
+	return &OmniRig{RigNum: rigNum, ForceVFO: v}
 }
 
 func (o *OmniRig) Name() string { return "omnirig" }
@@ -306,7 +324,21 @@ func (o *OmniRig) ReadState() (RigState, error) {
 	}
 	splitRecentOn := o.splitFlaky && !o.lastSplitOnAt.IsZero() && now.Sub(o.lastSplitOnAt) < 6*time.Second
 
-	s.FreqHz, s.RxFreqHz, s.Split = resolveOmniRigVFOs(o.rigType, freqMain, freqA, freqB, s.Vfo, splitRaw, splitRecentOn)
+	// A forced VFO replaces whatever the rig file reported, BEFORE anything is
+	// derived from it. Nothing downstream then has to know about the override.
+	vfo := s.Vfo
+	if o.ForceVFO != "" {
+		vfo = o.ForceVFO
+	}
+	s.FreqHz, s.RxFreqHz, s.Split = resolveOmniRigVFOs(o.rigType, freqMain, freqA, freqB, vfo, splitRaw, splitRecentOn)
+
+	// Delayed readback after a Set (see SetFrequency): logged from HERE because
+	// this runs on the COM-owning goroutine. One line, once per set.
+	if !o.pendingReadback.IsZero() && time.Now().After(o.pendingReadback) {
+		o.pendingReadback = time.Time{}
+		debugLog.Printf("OmniRig.SetFrequency: readback +1.5s FreqA=%d FreqB=%d Freq=%d → shown %d",
+			freqA, freqB, freqMain, s.FreqHz)
+	}
 
 	// Diagnostic logged ONLY when Split or VFO changes (not on a timer), so normal
 	// operation stays quiet but toggling split or SUB VFO on the radio is
@@ -497,21 +529,31 @@ func (o *OmniRig) SetFrequency(hz int64) error {
 		}
 	}
 
-	// Read back all three immediately. OmniRig is async (the CAT command is
+	// Read back all three, then AGAIN a moment later. OmniRig is async — the CAT
-	// queued + sent over serial), so these may still show the OLD value for
+	// command is queued and sent over serial — so an immediate read always shows
-	// one poll cycle — but if they NEVER change in the next poll, the rig
+	// the old value and proves nothing. The delayed one is the useful half: it
-	// isn't honouring the write (wrong .ini WRITE command for this model).
+	// separates "the rig ignored the write" from "the rig moved but its .ini
-	fa, fb, fg := int64(-1), int64(-1), int64(-1)
+	// never re-reads the frequency", which look identical to an operator whose
-	if v, err := oleutil.GetProperty(o.rig, "FreqA"); err == nil {
+	// display stays on the old band until they nudge the VFO.
-		fa = v.Val
+	//
+	// Off the CAT goroutine so the poll loop is not held for a second. COM is
+	// thread-affine, so the delayed read goes through the manager's own command
+	// channel rather than touching o.rig from here.
+	logFreqs := func(when string) {
+		fa, fb, fg := int64(-1), int64(-1), int64(-1)
+		if v, err := oleutil.GetProperty(o.rig, "FreqA"); err == nil {
+			fa = v.Val
+		}
+		if v, err := oleutil.GetProperty(o.rig, "FreqB"); err == nil {
+			fb = v.Val
+		}
+		if v, err := oleutil.GetProperty(o.rig, "Freq"); err == nil {
+			fg = v.Val
+		}
+		debugLog.Printf("OmniRig.SetFrequency: readback %s FreqA=%d FreqB=%d Freq=%d (target %d)", when, fa, fb, fg, hz)
 	}
-	if v, err := oleutil.GetProperty(o.rig, "FreqB"); err == nil {
+	logFreqs("now")
-		fb = v.Val
+	o.pendingReadback = time.Now().Add(1500 * time.Millisecond)
-	}
-	if v, err := oleutil.GetProperty(o.rig, "Freq"); err == nil {
-		fg = v.Val
-	}
-	debugLog.Printf("OmniRig.SetFrequency: readback FreqA=%d FreqB=%d Freq=%d (target %d)", fa, fb, fg, hz)
 	return nil
 }
 

internal/cat/omnirig_vfo_test.go

@@ -47,6 +47,14 @@ func TestResolveOmniRigVFOs(t *testing.T) {
 		{"pair enum AB, simplex → listening on A", "", a14200, a14200, b14205, "AB", pmSplitOff, false, a14200, 0, false},
 		{"pair enum AA, simplex → listening on A", "", a14200, a14200, b14205, "AA", pmSplitOff, false, a14200, 0, false},
 
+		// F4?? IC-7610 report, 2026-07-27: the operator's custom rig file declares
+		// VFO B permanently while they work on the MAIN VFO. OpsLog then wrote to A
+		// (SetSimplexMode acts on main) and read B — "the frequency never follows
+		// the knob". Honouring the enum is right in general, which is why the cure
+		// is an explicit override in the settings, applied before this function.
+		{"IC-7610 file wrongly says B — enum honoured, hence the override", "IC-7610", 0, 7150000, 14295000, "B", pmSplitOff, false, 14295000, 0, false},
+		{"same rig with the override forcing A", "IC-7610", 0, 7150000, 14295000, "A", pmSplitOff, false, 7150000, 0, false},
+
 		// Non-regression: a rig that does not report the VFO enum keeps the old
 		// order — freqA, then the generic Freq, then freqB.
 		{"no VFO enum, freqA populated (Yaesu/Kenwood)", "FT-891", a14200, a14200, 0, "", pmSplitOff, false, a14200, 0, false},

internal/db/db.go

@@ -6,6 +6,7 @@ import (
 	"embed"
 	"fmt"
 	"os"
+	"path/filepath"
 	"sort"
 	"strings"
 	"time"
@@ -161,7 +162,7 @@ func Open(path string) (*sql.DB, error) {
 		return nil, fmt.Errorf("ping sqlite: %w", err)
 	}
 	Dialect = "sqlite"
-	if err := migrate(conn, nil, path); err != nil {
+	if err := migrate(conn, nil, path, filepath.Base(path)); err != nil {
 		_ = conn.Close()
 		return nil, err
 	}
@@ -175,8 +176,8 @@ var LogSink func(format string, args ...any)
 
 // logMigration records a migration that has just been applied, and how long it
 // took — the only trace an operator has that a data-rewriting migration ran.
-func logMigration(name string, start time.Time) {
+func logMigration(label, name string, start time.Time) {
-	logf("db: migration %s applied in %s", name, time.Since(start).Round(time.Millisecond))
+	logf("db[%s]: migration %s applied in %s", label, name, time.Since(start).Round(time.Millisecond))
 }
 
 func logf(format string, args ...any) {
@@ -231,7 +232,11 @@ func backupBeforeRewrite(conn *sql.DB, dbPath, migration string) {
 // skipping those already applied. Intentionally minimal in-house system
 // (no external dependency). translate, when non-nil, rewrites each statement
 // for a non-SQLite backend (see mysqlDDL); nil means run the SQLite DDL as-is.
-func migrate(conn *sql.DB, translate func(string) string, dbPath string) error {
+// label names the database being migrated, for the log. Without it three
+// interleaved migration runs in one log were indistinguishable — an operator
+// reported "migrations are very slow" and the lines gave no way to tell one
+// database migrated three times from three databases migrated once.
+func migrate(conn *sql.DB, translate func(string) string, dbPath, label string) error {
 	// A non-nil translator means this is the MySQL connection (use the
 	// per-statement, FK-aware path); nil means a SQLite connection. This is
 	// determined by the caller's argument, NOT the global Dialect, so the
@@ -274,6 +279,16 @@ func migrate(conn *sql.DB, translate func(string) string, dbPath string) error {
 		return fmt.Errorf("read applied migrations: %w", err)
 	}
 
+	pending := 0
+	for _, name := range names {
+		if !applied[name] {
+			pending++
+		}
+	}
+	if pending > 0 {
+		logf("db[%s]: %d migration(s) to apply", label, pending)
+	}
+
 	for _, name := range names {
 		if applied[name] {
 			continue // already applied
@@ -307,7 +322,7 @@ func migrate(conn *sql.DB, translate func(string) string, dbPath string) error {
 			if _, err := conn.Exec(`INSERT INTO schema_migrations(name) VALUES(?)`, name); err != nil {
 				return fmt.Errorf("record migration %s: %w", name, err)
 			}
-			logMigration(name, start)
+			logMigration(label, name, start)
 			continue
 		}
 
@@ -327,7 +342,7 @@ func migrate(conn *sql.DB, translate func(string) string, dbPath string) error {
 		if err := tx.Commit(); err != nil {
 			return fmt.Errorf("commit migration %s: %w", name, err)
 		}
-		logMigration(name, start)
+		logMigration(label, name, start)
 	}
 	return nil
 }

internal/db/mysql.go

@@ -139,6 +139,7 @@ func translateTextColumns(s string) string {
 //     app-lifetime ctx with no per-query timeout) hold a connection for the whole
 //     chain of remote-MySQL latency, so a handful of concurrent UI bursts drained
 //     the pool and "after a while nothing updated" — grid, chat, live_status froze.
+//
 // 40 fits the actual deployment (max 5 ops on a server with max_connections=300 →
 // 40*5 = 200, leaving ~100 for phpMyAdmin/server overhead). This is the per-INSTANCE
 // pool, so keep max_connections >= pool*ops + headroom.
@@ -200,7 +201,7 @@ func OpenMySQL(c MySQLConfig) (*sql.DB, error) {
 		err = applyMySQLBaseline(conn)
 	} else {
 		// Existing database: apply only the migrations it's missing.
-		err = migrate(conn, mysqlDDL, "")
+		err = migrate(conn, mysqlDDL, "", "mysql:"+name)
 	}
 	if err != nil {
 		_ = conn.Close()
@@ -287,7 +288,11 @@ func applyMySQLBaseline(conn *sql.DB) error {
 		return fmt.Errorf("open baseline sqlite: %w", err)
 	}
 	defer mem.Close()
-	if err := migrate(mem, nil, ""); err != nil {
+	// In-memory SQLite, used only to derive the final schema for a FRESH MySQL
+	// database. Labelled so its (fast) migration lines are not mistaken for a
+	// real database being migrated — in one operator's log this pass sat between
+	// two slow MySQL runs and looked like a third database.
+	if err := migrate(mem, nil, "", "baseline:memory"); err != nil {
 		return fmt.Errorf("build baseline schema: %w", err)
 	}
 

internal/lookup/lookup.go

@@ -86,6 +86,22 @@ func (m *Manager) SetProviders(p ...Provider) {
 
 // Lookup returns a Result for the callsign. Falls back through providers
 // when one returns ErrNotFound or fails.
+// forceKey marks a context as a FORCED (operator-requested) lookup, which
+// bypasses the cache on the way in and refreshes it on the way out. Carried on
+// the context rather than as a parameter so every existing caller — and the
+// Provider interface — stays untouched.
+type forceKey struct{}
+
+// WithForce returns a context that makes Lookup skip the cache.
+func WithForce(ctx context.Context) context.Context {
+	return context.WithValue(ctx, forceKey{}, true)
+}
+
+func isForced(ctx context.Context) bool {
+	v, _ := ctx.Value(forceKey{}).(bool)
+	return v
+}
+
 func (m *Manager) Lookup(ctx context.Context, callsign string) (Result, error) {
 	call := strings.ToUpper(strings.TrimSpace(callsign))
 	if call == "" {
@@ -97,15 +113,23 @@ func (m *Manager) Lookup(ctx context.Context, callsign string) (Result, error) {
 	dxcc := m.dxcc
 	m.mu.RUnlock()
 
-	if r, ok := m.cache.Get(ctx, call); ok {
+	// A FORCED lookup skips the cache. The cache is right for the automatic
-		r.Source = "cache"
+	// lookup that fires as you type, but it also freezes a wrong answer for the
-		// Re-assert the authoritative DXCC fields (country/zones/continent)
+	// whole TTL: an operator who upgraded their QRZ subscription kept getting the
-		// from cty.dat on every cache hit — cheap (in-memory) and lets a
+	// thin free-account record for a month, and clearing the cache by hand was
-		// corrected entity mapping (e.g. Sicily → Italy) heal stale cached
+	// the only way out. A lookup the operator asked for by clicking is a
-		// rows without waiting for the TTL to expire.
+	// deliberate act and must reach the provider.
-		fillFromDXCC(&r, dxcc)
+	if !isForced(ctx) {
-		normalizeNames(&r)
+		if r, ok := m.cache.Get(ctx, call); ok {
-		return r, nil
+			r.Source = "cache"
+			// Re-assert the authoritative DXCC fields (country/zones/continent)
+			// from cty.dat on every cache hit — cheap (in-memory) and lets a
+			// corrected entity mapping (e.g. Sicily → Italy) heal stale cached
+			// rows without waiting for the TTL to expire.
+			fillFromDXCC(&r, dxcc)
+			normalizeNames(&r)
+			return r, nil
+		}
 	}
 
 	var lastErr error

internal/qso/qso.go

@@ -536,23 +536,11 @@ type UploadRow struct {
 // uploadStatusCols whitelists the per-service sent-status columns the QSL
 // Manager may filter on (guards the dynamic column name in the query).
 var uploadStatusCols = map[string]bool{
-	"lotw_sent":                  true,
+	"lotw_sent":                 true,
-	"eqsl_sent":                  true,
+	"eqsl_sent":                 true,
-	"qrzcom_qso_upload_status":   true,
+	"qrzcom_qso_upload_status":  true,
-	"qrzcom_qso_download_status": true,
+	"clublog_qso_upload_status": true,
-	"clublog_qso_upload_status":  true,
+	"hrdlog_qso_upload_status":  true,
-	"hrdlog_qso_upload_status":   true,
-	// Confirmation dates (ADIF YYYYMMDD strings, so plain TEXT like the rest).
-	"qsl_sent_date":            true,
-	"qsl_rcvd_date":            true,
-	"lotw_sent_date":           true,
-	"lotw_rcvd_date":           true,
-	"eqsl_sent_date":           true,
-	"eqsl_rcvd_date":           true,
-	"qrzcom_qso_upload_date":   true,
-	"qrzcom_qso_download_date": true,
-	"clublog_qso_upload_date":  true,
-	"hrdlog_qso_upload_date":   true,
 }
 
 // ListForUpload returns QSOs whose per-service sent-status column equals
@@ -755,16 +743,28 @@ func (r *Repo) MarkEQSLSent(ctx context.Context, id int64, date string) error {
 // which would be corrupted or meaningless if bulk-set to a single value.
 var bulkEditableCols = map[string]bool{
 	// QSL / upload status
-	"lotw_sent":                 true,
+	"lotw_sent":                  true,
-	"lotw_rcvd":                 true,
+	"lotw_rcvd":                  true,
-	"eqsl_sent":                 true,
+	"eqsl_sent":                  true,
-	"eqsl_rcvd":                 true,
+	"eqsl_rcvd":                  true,
-	"qsl_sent":                  true,
+	"qsl_sent":                   true,
-	"qsl_rcvd":                  true,
+	"qsl_rcvd":                   true,
-	"qsl_via":                   true,
+	"qsl_via":                    true,
-	"qrzcom_qso_upload_status":  true,
+	"qrzcom_qso_upload_status":   true,
-	"clublog_qso_upload_status": true,
+	"qrzcom_qso_download_status": true,
-	"hrdlog_qso_upload_status":  true,
+	"clublog_qso_upload_status":  true,
+	"hrdlog_qso_upload_status":   true,
+	// Confirmation DATES. ADIF YYYYMMDD strings, so plain TEXT like the rest.
+	"qsl_sent_date":            true,
+	"qsl_rcvd_date":            true,
+	"lotw_sent_date":           true,
+	"lotw_rcvd_date":           true,
+	"eqsl_sent_date":           true,
+	"eqsl_rcvd_date":           true,
+	"qrzcom_qso_upload_date":   true,
+	"qrzcom_qso_download_date": true,
+	"clublog_qso_upload_date":  true,
+	"hrdlog_qso_upload_date":   true,
 	// My station / operator
 	"station_callsign": true,
 	"operator":         true,
@@ -787,6 +787,14 @@ var bulkEditableCols = map[string]bool{
 	"my_arrl_sect":     true,
 	"my_darc_dok":      true,
 	"my_vucc_grids":    true,
+	// Contacted station: the LOCATION fields only. State and county are the ones
+	// an import loses and a whole run shares (a park activation, a county line
+	// operation), and the dialog has always offered them — but they were missing
+	// here, so choosing one failed at Apply. The rest of the contacted station
+	// (callsign, name, RST…) stays deliberately out: bulk-setting those would
+	// corrupt the log.
+	"state": true,
+	"cnty":  true,
 	// Contest — the exchange/label fields that are constant across a run.
 	// (srx/stx serial numbers stay excluded: they are per-QSO.)
 	"contest_id": true,
@@ -1185,7 +1193,15 @@ var filterableColumns = map[string]bool{
 	"iota": true, "sota_ref": true, "pota_ref": true, "wwff_ref": true, "rig": true, "ant": true,
 	"qsl_sent": true, "qsl_rcvd": true, "qsl_via": true,
 	"lotw_sent": true, "lotw_rcvd": true, "eqsl_sent": true, "eqsl_rcvd": true,
-	"qrzcom_qso_upload_status": true, "clublog_qso_upload_status": true, "hrdlog_qso_upload_status": true,
+	"qrzcom_qso_upload_status": true, "qrzcom_qso_download_status": true,
+	"clublog_qso_upload_status": true, "hrdlog_qso_upload_status": true,
+	// Confirmation DATES. ADIF YYYYMMDD strings, so a plain string comparison is
+	// also chronological — "before 20240101" works with no date parsing.
+	"qsl_sent_date": true, "qsl_rcvd_date": true,
+	"lotw_sent_date": true, "lotw_rcvd_date": true,
+	"eqsl_sent_date": true, "eqsl_rcvd_date": true,
+	"qrzcom_qso_upload_date": true, "qrzcom_qso_download_date": true,
+	"clublog_qso_upload_date": true, "hrdlog_qso_upload_date": true,
 	"contest_id": true, "srx": true, "stx": true,
 	"prop_mode": true, "sat_name": true,
 	"station_callsign": true, "operator": true, "my_grid": true, "my_country": true,
@@ -2812,3 +2828,20 @@ func parseTimeLoose(s string) time.Time {
 	}
 	return time.Time{}
 }
+
+// IsBulkEditable reports whether a column may be written by a bulk edit. Used by
+// the app layer's own test to prove that every field the UI offers is actually
+// accepted here — the two lists live in different packages and drifted apart
+// once already: the new confirmation columns were added to the QSL Manager's
+// filter whitelist instead of this one, so the UI offered fields that the
+// repository then refused with "field … is not bulk-editable".
+func IsBulkEditable(column string) bool { return bulkEditableCols[column] }
+
+// IsFilterable reports whether a column may appear in a query filter. Same
+// reason as IsBulkEditable.
+func IsFilterable(column string) bool { return filterableColumns[column] }
+
+// IsBulkEditableExtra / IsFilterableExtra cover the ADIF fields that have no
+// column of their own and live in extras_json.
+func IsBulkEditableExtra(field string) bool { _, ok := bulkEditableExtras[field]; return ok }
+func IsFilterableExtra(field string) bool   { _, ok := filterableExtras[field]; return ok }

main.go

@@ -125,7 +125,10 @@ func main() {
 		AssetServer: &assetserver.Options{
 			Assets: assets,
 		},
-		BackgroundColour: &options.RGBA{R: 250, G: 250, B: 249, A: 1},
+		// The colour the window is painted before the WebView draws. Matches the
+		// graphite theme's background (#16181d), which is the default on a fresh
+		// install — otherwise every launch flashes white first.
+		BackgroundColour: &options.RGBA{R: 0x16, G: 0x18, B: 0x1d, A: 1},
 		OnStartup:        app.startup,
 		OnDomReady:       app.domReady,
 		OnBeforeClose:    app.beforeClose,

refine_grid_test.go

@@ -0,0 +1,28 @@
+package main
+
+import "testing"
+
+// The case that started this: WSJT-X / MSHV can only send a 4-character grid, so
+// a digital QSO arrived with JN05 while QRZ knew JN05JG — and the fill-if-empty
+// enrichment rule kept the coarse one. Roughly 100 km of accuracy, silently lost
+// on every digital QSO.
+func TestRefineGrid(t *testing.T) {
+	cases := []struct{ have, found, want, why string }{
+		{"JN05", "JN05JG", "JN05JG", "the lookup EXTENDS the received square — take the precise one"},
+		{"jn05", "JN05JG", "JN05JG", "grids arrive in both cases"},
+		{"", "JN05JG", "JN05JG", "nothing received — take whatever was found"},
+		{"JN05JG", "", "JN05JG", "nothing found — keep what was received"},
+		{"JN05JG", "JN05", "JN05JG", "never trade a precise grid for a coarse one"},
+		{"JN05JG", "JN05JG", "JN05JG", "same grid"},
+		// A DISAGREEMENT is not a refinement: the station may be portable, and
+		// what came over the air is then the better record.
+		{"JN05", "JN18AA", "JN05", "different square — keep what was actually received"},
+		{"JN18AA", "JN05", "JN18AA", "different square, coarse lookup — keep the received one"},
+		{"", "", "", "nothing either way"},
+	}
+	for _, c := range cases {
+		if got := refineGrid(c.have, c.found); got != c.want {
+			t.Errorf("refineGrid(%q, %q) = %q, want %q — %s", c.have, c.found, got, c.want, c.why)
+		}
+	}
+}

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.21.6"
+	appVersion = "0.21.7"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.