feat(qsl): copy a card design from another profile

A second profile is usually the same operator with a different rig or a
different locator — same callsign, same cards. Having to redraw a design
because the antenna changed is work nobody should do.

The designer now lists the designs the active profile cannot see and copies a
chosen one into it. Designs it already sees — its own, and the shared ones —
are left out: they are not something to copy.

A COPY, not a move or a share. The original profile keeps its design untouched
and the duplicate is free to diverge, which it usually will: a second profile
exists because something differs, and that something often ends up on the card.

The PICTURES are copied too, and that is the part worth getting right. Stored
documents reference photos by name relative to the template's own asset folder,
so duplicating the JSON alone would point the new design at files that are not
in its folder. It is validated against its own folder afterwards, and a failure
rolls the row back rather than leaving a design whose pictures are missing.
Sharing the source's folder was the other option and a worse one: deleting
either design would then have emptied the other.

amps_linked_test.go

@@ -0,0 +1,63 @@
+package main
+
+import "testing"
+
+// The coupling is a SET, not a global switch.
+//
+// A station can run a combiner pair AND a third amplifier that has nothing to
+// do with it — two SPE on the combiner, a PowerGenius on another antenna. A
+// global flag would send that third one into OPERATE alongside them.
+func TestAmpTargetsFollowTheGroup(t *testing.T) {
+	a := &App{}
+	a.ampInsts = map[string]*ampInst{"spe1": {}, "spe2": {}, "pgxl": {}}
+	group := []string{"spe1", "spe2"}
+
+	// A member commands the whole group, itself first.
+	got := a.ampTargets("spe2", group)
+	if len(got) != 2 || got[0] != "spe2" || got[1] != "spe1" {
+		t.Errorf("member = %v, want [spe2 spe1] — the clicked one first", got)
+	}
+
+	// The amplifier OUTSIDE the group keeps its buttons to itself.
+	if got := a.ampTargets("pgxl", group); len(got) != 1 || got[0] != "pgxl" {
+		t.Errorf("outsider = %v, want just [pgxl]", got)
+	}
+
+	// No group at all: everyone is on their own.
+	if got := a.ampTargets("spe1", nil); len(got) != 1 || got[0] != "spe1" {
+		t.Errorf("no group = %v, want just [spe1]", got)
+	}
+
+	// A group remembering an amplifier that is gone must not carry it: it would
+	// fail the command for a member that no longer exists.
+	if got := a.ampTargets("spe1", []string{"spe1", "deleted"}); len(got) != 1 || got[0] != "spe1" {
+		t.Errorf("stale member = %v, want it dropped", got)
+	}
+}
+
+// One amplifier coupled to itself is not a group — storing it would make every
+// command fan out to a single member for ever, which is just noise.
+func TestLinkedAmpsNeedsTwo(t *testing.T) {
+	for _, tc := range []struct {
+		in   []string
+		want int
+	}{
+		{[]string{"a", "b"}, 2},
+		{[]string{"a"}, 0},
+		{[]string{"  ", "a"}, 0}, // blanks are not members
+		{nil, 0},
+	} {
+		clean := make([]string, 0, len(tc.in))
+		for _, id := range tc.in {
+			if id != "" && id != "  " {
+				clean = append(clean, id)
+			}
+		}
+		if len(clean) < 2 {
+			clean = nil
+		}
+		if len(clean) != tc.want {
+			t.Errorf("SetLinkedAmps(%v) would keep %d, want %d", tc.in, len(clean), tc.want)
+		}
+	}
+}

app.go

@@ -78,6 +78,7 @@ import (
 const (
 	keyQRZUser     = "lookup.qrz.user"
 	keyQRZPassword = "lookup.qrz.password"
+	keyQRZNickname = "lookup.qrz.prefer_nickname" // "1" → QRZ <nickname> over first+last name
 	keyHQUser      = "lookup.hamqth.user"
 	keyHQPassword  = "lookup.hamqth.password"
 	keyCacheTTL    = "lookup.cache.ttl_days"
@@ -298,6 +299,7 @@ const (
 	keyClusterAutoConnect = "cluster.auto_connect"      // open every enabled server at app start
 	keyClusterSelfSpot    = "cluster.self_spot"         // "1" → announce ourselves on the cluster as we log
 	keyClusterSelfSpotMin = "cluster.self_spot_minutes" // shortest gap between two self-spots
+	keyClusterSpotTTL     = "cluster.spot_ttl_min"      // drop spots older than this; 0 = keep them
 
 	keyScpEnabled = "scp.enabled" // Super Check Partial / N+1 suggestions on
 
@@ -352,6 +354,7 @@ const (
 	keyExtHRDLogCode       = "extsvc.hrdlog.code" // HRDLog account upload code
 	keyExtHRDLogAutoUpload = "extsvc.hrdlog.auto_upload"
 	keyExtHRDLogUploadMode = "extsvc.hrdlog.upload_mode"
+	keyExtHRDLogOnAir      = "extsvc.hrdlog.on_air" // publish frequency/mode/rig live on hrdlog.net
 
 	keyExtEQSLUsername   = "extsvc.eqsl.username"
 	keyExtEQSLPassword   = "extsvc.eqsl.password"
@@ -563,6 +566,10 @@ type LookupSettings struct {
 	Primary        string `json:"primary"`
 	Failsafe       string `json:"failsafe"`
 	DownloadImages bool   `json:"download_images"` // show QRZ profile pictures in the UI
+	// QRZPreferNickname logs the name an operator goes BY rather than their
+	// registered first+last. QRZ only: HamQTH's <nick> already serves that role
+	// there, so the option would be a second switch for a behaviour it has.
+	QRZPreferNickname bool `json:"qrz_prefer_nickname"`
 	CacheTTLDays      int  `json:"cache_ttl_days"`
 }
 
@@ -1401,6 +1408,7 @@ func (a *App) startup(ctx context.Context) {
 	go a.sendTelemetryHeartbeat()
 	go a.liveStatusLoop()  // multi-op: heartbeat current activity to shared MySQL
 	go a.chatLoop()        // multi-op: poll the shared chat + heartbeat presence
+	go a.hrdlogOnAirLoop() // publish frequency/mode/rig on hrdlog.net when enabled
 	// Locator store BEFORE the feed: the feed asks whether it exists to decide
 	// which bands to subscribe to.
 	a.startGridCache()
@@ -2595,7 +2603,7 @@ func (a *App) reloadLookupProviders() {
 		return
 	}
 	m, err := a.settings.GetMany(a.ctx,
-		keyQRZUser, keyQRZPassword, keyHQUser, keyHQPassword,
+		keyQRZUser, keyQRZPassword, keyQRZNickname, keyHQUser, keyHQPassword,
 		keyCacheTTL, keyLookupPrimary, keyLookupFailsafe)
 	if err != nil {
 		fmt.Println("OpsLog: settings load error:", err)
@@ -2609,7 +2617,9 @@ func (a *App) reloadLookupProviders() {
 		switch name {
 		case "qrz":
 			if m[keyQRZUser] != "" && m[keyQRZPassword] != "" {
-				return lookup.NewQRZ(m[keyQRZUser], m[keyQRZPassword])
+				p := lookup.NewQRZ(m[keyQRZUser], m[keyQRZPassword])
+				p.PreferNickname = m[keyQRZNickname] == "1"
+				return p
 			}
 		case "hamqth":
 			if m[keyHQUser] != "" && m[keyHQPassword] != "" {
@@ -7197,7 +7207,7 @@ func (a *App) GetLookupSettings() (LookupSettings, error) {
 	}
 	m, err := a.settings.GetMany(a.ctx,
 		keyQRZUser, keyQRZPassword, keyHQUser, keyHQPassword,
-		keyCacheTTL, keyLookupPrimary, keyLookupFailsafe, keyLookupImages)
+		keyCacheTTL, keyLookupPrimary, keyLookupFailsafe, keyLookupImages, keyQRZNickname)
 	if err != nil {
 		return LookupSettings{}, err
 	}
@@ -7213,6 +7223,7 @@ func (a *App) GetLookupSettings() (LookupSettings, error) {
 		Primary:           m[keyLookupPrimary],
 		Failsafe:          m[keyLookupFailsafe],
 		DownloadImages:    m[keyLookupImages] == "1",
+		QRZPreferNickname: m[keyQRZNickname] == "1",
 		CacheTTLDays:      ttl,
 	}, nil
 }
@@ -7239,6 +7250,7 @@ func (a *App) SaveLookupSettings(s LookupSettings) error {
 		keyLookupPrimary:  s.Primary,
 		keyLookupFailsafe: s.Failsafe,
 		keyLookupImages:   boolStr(s.DownloadImages),
+		keyQRZNickname:    boolStr(s.QRZPreferNickname),
 	} {
 		if err := a.settings.Set(a.ctx, k, v); err != nil {
 			return err
@@ -9902,7 +9914,7 @@ func (a *App) loadExternalServices() extsvc.ExternalServices {
 		keyExtLoTWUploadFlag, keyExtLoTWUploadFlags, keyExtLoTWWriteLog,
 		keyExtLoTWAutoUpload, keyExtLoTWUploadMode,
 		keyExtLoTWUsername, keyExtLoTWWebPassword,
-		keyExtHRDLogCallsign, keyExtHRDLogCode, keyExtHRDLogAutoUpload, keyExtHRDLogUploadMode,
+		keyExtHRDLogCallsign, keyExtHRDLogCode, keyExtHRDLogAutoUpload, keyExtHRDLogUploadMode, keyExtHRDLogOnAir,
 		keyExtEQSLUsername, keyExtEQSLPassword, keyExtEQSLQTHNick, keyExtEQSLAutoUpload, keyExtEQSLUploadMode,
 		keyExtCloudlogURL, keyExtCloudlogAPIKey, keyExtCloudlogStationID,
 		keyExtCloudlogAutoUpload, keyExtCloudlogUploadMode, keyExtDeleteRemote)
@@ -9956,6 +9968,7 @@ func (a *App) loadExternalServices() extsvc.ExternalServices {
 		Code:       m[keyExtHRDLogCode],
 		AutoUpload: m[keyExtHRDLogAutoUpload] == "1",
 		UploadMode: extsvc.UploadMode(m[keyExtHRDLogUploadMode]),
+		OnAir:      m[keyExtHRDLogOnAir] == "1",
 	}
 	// Default the HRDLog callsign to the active profile's call when unset.
 	if out.HRDLog.Callsign == "" && a.profiles != nil {
@@ -10085,6 +10098,7 @@ func (a *App) SaveExternalServices(cfg extsvc.ExternalServices) error {
 		keyExtHRDLogCode:       strings.TrimSpace(cfg.HRDLog.Code),
 		keyExtHRDLogAutoUpload: hlAuto,
 		keyExtHRDLogUploadMode: hlMode,
+		keyExtHRDLogOnAir:      boolStr(cfg.HRDLog.OnAir),
 
 		keyExtEQSLUsername:   strings.ToUpper(strings.TrimSpace(cfg.EQSL.Username)),
 		keyExtEQSLPassword:   cfg.EQSL.Password,
@@ -16212,6 +16226,19 @@ func (a *App) ampInstByID(id string) *ampInst {
 
 // AmpOperate puts the given amp in OPERATE (true) or STANDBY (false).
 func (a *App) AmpOperate(id string, on bool) error {
+	// Fan out here rather than in the UI: the card and the docked widget both
+	// call this, and a coupling implemented in one of them would be missing from
+	// the other — which on a combiner means one amplifier keyed and one not.
+	var firstErr error
+	for _, tid := range a.ampTargets(id, a.GetLinkedAmps()) {
+		if err := a.ampOperateOne(tid, on); err != nil && firstErr == nil {
+			firstErr = err
+		}
+	}
+	return firstErr
+}
+
+func (a *App) ampOperateOne(id string, on bool) error {
 	inst := a.ampInstByID(id)
 	if inst == nil {
 		return fmt.Errorf("amplifier not running — check Settings → Amplifier")
@@ -16236,6 +16263,18 @@ func (a *App) AmpPower(id string, on bool) (err error) {
 			applog.Printf("amp %s: power %v failed: %v", id, on, err)
 		}
 	}()
+	linked := a.GetLinkedAmps()
+	targets := a.ampTargets(id, linked)
+	var firstErr error
+	for _, tid := range targets {
+		if e := a.ampPowerOne(tid, on, len(targets) > 1); e != nil && firstErr == nil {
+			firstErr = e
+		}
+	}
+	return firstErr
+}
+
+func (a *App) ampPowerOne(id string, on, linked bool) error {
 	inst := a.ampInstByID(id)
 	if inst == nil {
 		return fmt.Errorf("amplifier not running — check Settings → Amplifier")
@@ -16252,6 +16291,12 @@ func (a *App) AmpPower(id string, on bool) (err error) {
 		}
 		return inst.acom.PowerOff()
 	}
+	// Not an error worth surfacing when linked: a PGXL alongside two SPEs simply
+	// has no power command on its direct link, and reporting that as a failure
+	// would make a successful pair look broken.
+	if linked {
+		return nil
+	}
 	return fmt.Errorf("power on/off is not available for this amplifier")
 }
 
@@ -17438,6 +17483,16 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 		if a.dxcc == nil {
 			continue
 		}
+		// Say WHY a maritime/aeronautical mobile has no entity, rather than
+		// leaving the column blank — blank is what an unresolved spot looks like,
+		// and the two mean opposite things: one is "we don't know yet", this is
+		// "there is nothing to know, the station is at sea". Display only: the
+		// QSO's own Country stays empty, because it is a DXCC entity name and
+		// there is none.
+		if dxcc.IsMobileNoEntity(q.Call) {
+			out[i].Country = "Maritime mobile — no DXCC"
+			continue
+		}
 		m, ok := a.dxcc.Lookup(q.Call)
 		if !ok || m.Entity == nil {
 			continue
@@ -17728,3 +17783,141 @@ func (a *App) SetKenwoodKeySpeed(wpm int) error {
 	}
 	return a.cat.KenwoodDo(func(k cat.KenwoodController) error { return k.SetKeySpeed(wpm) })
 }
+
+// spotTTLMax bounds the setting. Twelve hours is far past any operational use
+// and exists only so a mistyped value cannot mean "never".
+const spotTTLMax = 720
+
+// GetSpotTTLMinutes returns how long a spot stays in the list, in minutes.
+// 0 means spots are kept until the count cap pushes them out, which is what
+// OpsLog always did.
+func (a *App) GetSpotTTLMinutes() int {
+	n, _ := strconv.Atoi(a.settingOr(keyClusterSpotTTL, ""))
+	if n < 0 {
+		return 0
+	}
+	if n > spotTTLMax {
+		return spotTTLMax
+	}
+	return n
+}
+
+// SetSpotTTLMinutes sets it. Clamped here as well as in the UI: the value
+// shapes what an operator sees on the band map, and a stale or bypassed
+// frontend must not be able to widen it past the ceiling.
+func (a *App) SetSpotTTLMinutes(min int) error {
+	if min < 0 {
+		min = 0
+	}
+	if min > spotTTLMax {
+		min = spotTTLMax
+	}
+	a.setSetting(keyClusterSpotTTL, strconv.Itoa(min))
+	return nil
+}
+
+// SetCompactHeight resizes the compact window to fit its content.
+//
+// The height used to be a constant "tuned so the compact entry strip fits in a
+// single row". Constants tuned against a layout stop being true the moment the
+// layout changes, and this one outlived a strip that had since lost a row —
+// leaving a band of empty window under the fields. The frontend measures what
+// it actually rendered and says so.
+//
+// Ignored unless compact is on, so nothing can shrink the normal window.
+func (a *App) SetCompactHeight(h int) {
+	if a.ctx == nil || !a.compact {
+		return
+	}
+	// Bounded: a measurement of zero (a layout not yet painted) must not collapse
+	// the window to nothing, and no strip is ever 600px tall.
+	if h < 80 || h > 600 {
+		return
+	}
+	w, _ := wruntime.WindowGetSize(a.ctx)
+	if w <= 0 {
+		w = compactW
+	}
+	wruntime.WindowSetMinSize(a.ctx, 900, h)
+	wruntime.WindowSetSize(a.ctx, w, h)
+}
+
+// keyAmpsLinked couples the configured amplifiers so ON, OFF and OPERATE act on
+// all of them at once — the SPE CO1-2 combiner case.
+//
+// The combiner is an RF device: it sums two amplifiers and commands nothing. So
+// "combined" operation is really two amplifiers that must be kept in the same
+// state, and leaving one in OPERATE while the other sits in STANDBY is exactly
+// what must not happen — the combiner would see power on one input only.
+const keyAmpsLinked = "amps.linked"
+
+// GetLinkedAmps returns the ids of the amplifiers commanded together.
+//
+// A SET, not a global flag. A station can have a combiner pair AND a third
+// amplifier that has nothing to do with it — two SPE on the combiner and a
+// PowerGenius on another antenna — and a global switch would send that third
+// one into OPERATE alongside them.
+func (a *App) GetLinkedAmps() []string {
+	out := []string{}
+	for _, id := range strings.Split(a.settingOr(keyAmpsLinked, ""), ",") {
+		if id = strings.TrimSpace(id); id != "" {
+			out = append(out, id)
+		}
+	}
+	return out
+}
+
+// SetLinkedAmps records which amplifiers are coupled.
+func (a *App) SetLinkedAmps(ids []string) error {
+	clean := make([]string, 0, len(ids))
+	for _, id := range ids {
+		if id = strings.TrimSpace(id); id != "" {
+			clean = append(clean, id)
+		}
+	}
+	// One amplifier coupled to itself is not a group; store nothing rather than
+	// a set that would make ampTargets fan out to a single member for ever.
+	if len(clean) < 2 {
+		clean = nil
+	}
+	a.setSetting(keyAmpsLinked, strings.Join(clean, ","))
+	return nil
+}
+
+// ampTargets returns the amplifier ids a command should reach: the one asked
+// for, or every running amplifier when they are linked.
+//
+// The METERS are deliberately untouched by this — each amplifier keeps its own
+// bars. Two amps combined are still two amps, and an operator watching for one
+// of them to run away needs to see them apart.
+func (a *App) ampTargets(id string, linked []string) []string {
+	inGroup := false
+	for _, l := range linked {
+		if l == id {
+			inGroup = true
+			break
+		}
+	}
+	// An amplifier outside the group keeps its own buttons to itself — that is
+	// the whole point of the group being a set.
+	if !inGroup {
+		return []string{id}
+	}
+	a.ampsMu.Lock()
+	defer a.ampsMu.Unlock()
+	out := make([]string, 0, len(linked))
+	// The one that was asked for goes FIRST, so a partial failure still did what
+	// the operator clicked before it stopped.
+	out = append(out, id)
+	for _, l := range linked {
+		if l == id {
+			continue
+		}
+		// Only amplifiers actually running: a group remembering one that has been
+		// deleted or switched off must not fail the whole command for it.
+		if _, ok := a.ampInsts[l]; ok {
+			out = append(out, l)
+		}
+	}
+	return out
+}

app_qsl_designer.go

@@ -748,3 +748,107 @@ func sampleQSO() qso.QSO {
 		QSLMsg:   "TNX FB QSO — 73!",
 	}
 }
+
+// QSLForeignTemplate is one card design belonging to ANOTHER profile, offered
+// for copying into the active one.
+type QSLForeignTemplate struct {
+	ID          int64  `json:"id"`
+	Name        string `json:"name"`
+	ProfileID   int64  `json:"profile_id"`
+	ProfileName string `json:"profile_name"`
+}
+
+// QSLListOtherProfileTemplates lists the designs the ACTIVE profile cannot see.
+//
+// A second profile is usually the same operator with a different rig or a
+// different locator — same callsign, same cards. Redrawing a design because the
+// antenna changed is work nobody should have to do, and the designs a profile
+// already sees (its own, and the shared ones) are deliberately left out: they
+// are not something to copy.
+func (a *App) QSLListOtherProfileTemplates() ([]QSLForeignTemplate, error) {
+	if a.qslTemplates == nil || a.profiles == nil {
+		return nil, fmt.Errorf("db not initialized")
+	}
+	active := int64(-1)
+	if p, err := a.profiles.Active(a.ctx); err == nil {
+		active = p.ID
+	}
+	names := map[int64]string{}
+	if list, err := a.ListProfiles(); err == nil {
+		for _, p := range list {
+			names[p.ID] = p.Name
+		}
+	}
+	all, err := a.qslTemplates.List(a.ctx)
+	if err != nil {
+		return nil, err
+	}
+	out := []QSLForeignTemplate{}
+	for _, r := range all {
+		// Shared designs (no profile) already appear in every profile's list.
+		if r.ProfileID == nil || *r.ProfileID == active {
+			continue
+		}
+		out = append(out, QSLForeignTemplate{
+			ID: r.ID, Name: r.Name, ProfileID: *r.ProfileID,
+			ProfileName: firstNonEmptyStr(names[*r.ProfileID], fmt.Sprintf("profile %d", *r.ProfileID)),
+		})
+	}
+	return out, nil
+}
+
+// QSLCopyTemplateToActiveProfile duplicates another profile's design into the
+// active one and returns the new id.
+//
+// A COPY, not a move or a share. The original profile keeps its design
+// untouched, and the copy is free to diverge — a second profile usually exists
+// because something differs, and that something often ends up on the card.
+func (a *App) QSLCopyTemplateToActiveProfile(id int64) (int64, error) {
+	if a.qslTemplates == nil {
+		return 0, fmt.Errorf("db not initialized")
+	}
+	src, err := a.qslTemplates.Get(a.ctx, id)
+	if err != nil {
+		return 0, err
+	}
+	// The stored document references photos by NAME, relative to the template's
+	// own asset folder — so copying the JSON alone would point the new design at
+	// files that are not in its folder, and the save would fail validation.
+	//
+	// The files are copied too, giving the duplicate its own folder. Sharing the
+	// source's would mean deleting one design silently emptied the other.
+	rec := qslcard.Record{Name: src.Name + " (copy)", JSON: src.JSON}
+	if p, e := a.profiles.Active(a.ctx); e == nil {
+		rec.ProfileID = &p.ID
+	}
+	// Saved first: a new template needs its id before it can own a folder.
+	if err := a.qslTemplates.Save(a.ctx, &rec); err != nil {
+		return 0, err
+	}
+	srcDir := qslcard.TemplateDir(a.qslDir(), id)
+	dstDir := qslcard.TemplateDir(a.qslDir(), rec.ID)
+	if err := copyDirContents(srcDir, dstDir); err != nil && !os.IsNotExist(err) {
+		// Roll back rather than leave a design whose pictures are missing.
+		_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+		return 0, fmt.Errorf("copy template assets: %w", err)
+	}
+	t, err := qslcard.Parse([]byte(rec.JSON))
+	if err != nil {
+		_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+		return 0, err
+	}
+	if err := qslcard.Validate(t, qslcard.PhotoExistsIn(dstDir)); err != nil {
+		_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+		return 0, fmt.Errorf("copied design is incomplete: %w", err)
+	}
+	applog.Printf("qsl: copied template %q (id %d) into the active profile as %q (id %d)",
+		src.Name, id, rec.Name, rec.ID)
+	return rec.ID, nil
+}
+
+func firstNonEmptyStr(a, b string) string {
+	if strings.TrimSpace(a) != "" {
+		return a
+	}
+	return b
+}

changelog.json

@@ -1,4 +1,46 @@
 [
+  {
+    "version": "0.25.1",
+    "date": "",
+    "en": [
+      "Amplifiers: tick the ones sharing a combiner and ON, OFF and OPERATE act on all of them at once. Each keeps its own meters.",
+      "Shared CAT: with the wire trace on, every command a client sends and the answer given are logged.",
+      "Shared CAT: JTDX and WSJT-X no longer get an error for turning split off on a rig that has none, or for setting the transmit mode — which made JTDX abandon a transmission.",
+      "QSL designer: a card design can be copied from another profile, pictures included — a second profile for a different rig no longer means redrawing it."
+    ],
+    "fr": [
+      "Amplificateurs : coche ceux qui partagent un combiner et ON, OFF et OPERATE agissent sur tous à la fois. Chacun garde ses mesures.",
+      "CAT partagé : avec la trace activée, chaque commande envoyée par un client et la réponse donnée sont journalisées.",
+      "CAT partagé : JTDX et WSJT-X ne reçoivent plus d erreur en désactivant un split inexistant ni en réglant le mode d émission — ce qui faisait abandonner une émission à JTDX.",
+      "Concepteur QSL : un modèle de carte peut être copié depuis un autre profil, images comprises — un second profil pour une autre radio n oblige plus à le redessiner."
+    ]
+  },
+  {
+    "version": "0.25.0",
+    "date": "",
+    "en": [
+      "Cluster: \"Hide worked\" no longer hides a spot that is a new prefix, county, grid or park in an entity already worked.",
+      "DX Cluster: a spot lifetime can be set — 5, 10, 15 minutes or your own value — after which spots leave the list and the band maps.",
+      "Call lookup: QRZ.com now fills Name with the first name only, and optionally with the operator nickname instead.",
+      "Entry form: a narrower left column, State beside the locator, and a new line with County, CQ, ITU and DXCC.",
+      "Station Control: the short and long path headings are repeated under the compass, at a readable size and clickable.",
+      "Compact mode: the window now fits the entry strip instead of leaving a band of empty space below it.",
+      "HRDLog: an ON AIR option publishes your live frequency, mode and rig on hrdlog.net.",
+      "ADIF: the county is exported as STATE,COUNTY as the standard requires, and a county imported that way now fills the state too.",
+      "A /MM or /AM callsign no longer resolves to a country — RI1FJL/MM read as Franz Josef Land while the expedition was still sailing there."
+    ],
+    "fr": [
+      "Cluster : « Masquer les contactés » ne masque plus un spot qui est un nouveau préfixe, comté, carré ou parc dans une contrée déjà faite.",
+      "Cluster DX : on peut fixer une durée de vie des spots — 5, 10, 15 minutes ou une valeur libre — au-delà de laquelle ils quittent la liste et les band maps.",
+      "Recherche d indicatif : QRZ.com remplit désormais Nom avec le seul prénom, et au choix avec le surnom de l opérateur.",
+      "Saisie : colonne de gauche plus étroite, État à côté du locator, et une nouvelle ligne Comté, CQ, ITU et DXCC.",
+      "Contrôle station : les azimuts court et long chemin sont repris sous la boussole, lisibles et cliquables.",
+      "Mode compact : la fenêtre épouse la bande de saisie au lieu de laisser une bande vide en dessous.",
+      "HRDLog : une option ON AIR publie ta fréquence, ton mode et ta radio en direct sur hrdlog.net.",
+      "ADIF : le comté est exporté sous la forme ÉTAT,COMTÉ comme l exige le standard, et un comté importé ainsi remplit aussi l état.",
+      "Un indicatif en /MM ou /AM ne se résout plus en pays — RI1FJL/MM affichait Franz Josef Land alors que l expédition faisait encore route."
+    ]
+  },
   {
     "version": "0.24.9",
     "date": "",

frontend/src/App.tsx

@@ -16,7 +16,7 @@ import {
   GetStartupStatus, CheckForUpdate, DownloadAndApplyUpdate, GetLiveStations, GetWhatsNew, GetChangelog,
   SMTPConfigured, SendLogToDeveloper,
   WorkedBefore,
-  SetCompactMode,
+  SetCompactMode, SetCompactHeight,
   GetCATState, SetCATFrequency, SetCATMode, SwitchCATRig, FlexApplyBandAntenna, FlexApplyBandPower,
   GetSecretStatus, UnlockSecrets,
   RefreshCtyDat, DownloadAllReferenceLists,
@@ -90,8 +90,8 @@ import { ExportFieldsDialog } from '@/components/ExportFieldsDialog';
 import { ShutdownProgress } from '@/components/ShutdownProgress';
 import { ClusterGrid } from '@/components/ClusterGrid';
 import { cleanSpotter, inferSpotMode, spotModeCategory, spotStatusKey } from '@/lib/spot';
-import { applySpotDisplay, readSpotDisplayOptions, SPOT_DISPLAY_OPTIONS_EXPOSED } from '@/lib/spotDisplay';
-import { GetRowColors } from '../wailsjs/go/main/App';
+import { applySpotDisplay, readSpotDisplayOptions, spotIsWorked, SPOT_DISPLAY_OPTIONS_EXPOSED } from '@/lib/spotDisplay';
+import { GetRowColors, GetSpotTTLMinutes, IsNewUSCounty } from '../wailsjs/go/main/App';
 import { WorkedBeforeGrid } from '@/components/WorkedBeforeGrid';
 import { NetControlPanel } from '@/components/NetControlPanel';
 import { ContestPanel, CONTEST_DEFAULT, type ContestSession } from '@/components/ContestPanel';
@@ -529,6 +529,28 @@ export default function App() {
     setCompact(next);
     SetCompactMode(next);
   }
+  // Fit the compact window to what was actually rendered.
+  //
+  // The height was a constant "tuned so the compact entry strip fits in a single
+  // row". A constant tuned against a layout stops being true the moment the
+  // layout changes, and this one outlived a strip that had since lost a row —
+  // leaving a band of empty window under the fields. Measure instead.
+  const compactRootRef = useRef<HTMLDivElement | null>(null);
+  useEffect(() => {
+    if (!compact) return;
+    const fit = () => {
+      const el = compactRootRef.current;
+      if (!el) return;
+      // Rounded, so a sub-pixel reflow cannot start a resize loop.
+      // + the compact topbar, which is a fixed h-8 (32px), + a couple of pixels
+      // for the border so the strip is never clipped by one row of anti-aliasing.
+      SetCompactHeight(Math.round(el.getBoundingClientRect().height) + 32 + 2);
+    };
+    const id = window.setTimeout(fit, 60); // let the strip paint first
+    const ro = new ResizeObserver(fit);
+    if (compactRootRef.current) ro.observe(compactRootRef.current);
+    return () => { window.clearTimeout(id); ro.disconnect(); };
+  }, [compact]);
 
   // CAT — receives live rig state via Wails events.
   const [catState, setCatState] = useState<CATState>({ enabled: false, connected: false } as any);
@@ -1928,6 +1950,31 @@ export default function App() {
   // settings dialog closes, which is the only place it changes.
   const [rowColors, setRowColors] = useState<any>(null);
   useEffect(() => { GetRowColors().then(setRowColors).catch(() => {}); }, [showSettings]);
+  // Spot lifetime (Settings → DX Cluster). Spots are actually REMOVED rather
+  // than filtered at render: the cluster list, every band map and the counts all
+  // read the same array, so pruning it once is what makes the setting mean the
+  // same thing everywhere — and it gives the memory back.
+  const [spotTTLMin, setSpotTTLMin] = useState(0);
+  useEffect(() => { GetSpotTTLMinutes().then(setSpotTTLMin).catch(() => {}); }, [showSettings]);
+  useEffect(() => {
+    if (spotTTLMin <= 0) return; // 0 = keep until the count cap pushes them out
+    const sweep = () => {
+      const cutoff = Date.now() - spotTTLMin * 60_000;
+      setSpots((arr) => {
+        const kept = arr.filter((sp) => {
+          const t = Date.parse((sp as any).received_at ?? '');
+          return isNaN(t) || t >= cutoff; // an unparseable stamp is never a reason to drop a spot
+        });
+        return kept.length === arr.length ? arr : kept;
+      });
+    };
+    sweep();
+    // Half a minute: fine enough that a 5-minute setting is honoured closely,
+    // coarse enough to be invisible next to the spot stream itself.
+    const id = window.setInterval(sweep, 30_000);
+    return () => window.clearInterval(id);
+  }, [spotTTLMin]);
+
   const qsosWithAwards = useMemo(
     () => (qsos as any[]).map((q) => ({ ...q, award_refs: parseAwardRefs(q.award_refs) })),
     [qsos],
@@ -4414,6 +4461,67 @@ export default function App() {
         onBlur={() => setQth(titleCase)} />
     </div>
   );
+  // State sits between QTH and the locator: it is part of the same "where is
+  // this station" reading, and it is what several awards key off (WAS, the US
+  // county work). Narrow — it holds two or three characters.
+  const stateBlock = (
+    <div className="flex flex-col w-[70px] shrink-0"><Label className="mb-1 h-3.5">{t('field.state')}</Label>
+      <Input value={details.state ?? ''} className="font-mono"
+        onChange={(e) => setDetails((d) => ({ ...d, state: e.target.value.toUpperCase() }))} />
+    </div>
+  );
+  // County beside State: the lookup fills QTH, State, County and the locator
+  // together, and they are read together. Wider than State because a county name
+  // is a name — "St. Tammany Parish", not a code.
+  // The row Comment/Note freed by moving onto one line: county, zones and the
+  // ADIF entity number. All four are filled by the lookup and were previously
+  // only visible after opening a tab — which is the wrong place for values an
+  // operator wants to SEE are right before pressing Log.
+  //
+  // A numeric field stores undefined when cleared, not 0: zero is a real DXCC
+  // number for "no entity" and a real answer for a zone, so an empty box must
+  // stay empty rather than assert something.
+  // NEW badge on the county — the same answer the Details tab gives, moved to
+  // where the county is now typed. Debounced: this field is typed into as well
+  // as filled by the lookup, and the check hits the database.
+  const [entryNewCounty, setEntryNewCounty] = useState(false);
+  useEffect(() => {
+    const cnty = (details.cnty ?? '').trim();
+    if (!cnty) { setEntryNewCounty(false); return; }
+    let alive = true;
+    const id = window.setTimeout(async () => {
+      try {
+        const isNew = await IsNewUSCounty(details.state ?? '', cnty);
+        if (alive) setEntryNewCounty(!!isNew);
+      } catch { if (alive) setEntryNewCounty(false); }
+    }, 300);
+    return () => { alive = false; window.clearTimeout(id); };
+  }, [details.state, details.cnty]);
+
+  const num = (v: string): number | undefined => {
+    const s = v.replace(/[^0-9]/g, '');
+    return s === '' ? undefined : parseInt(s, 10);
+  };
+  const geoDetailRow = (
+    <div className="flex gap-4 items-end">
+      <div className="flex flex-col flex-1 min-w-0"><Label className="mb-1 h-3.5">{t('field.cnty')}</Label>
+        <Input value={details.cnty ?? ''}
+          onChange={(e) => setDetails((d) => ({ ...d, cnty: e.target.value }))} />
+      </div>
+      <div className="flex flex-col w-[64px] shrink-0"><Label className="mb-1 h-3.5">{t('field.cqz')}</Label>
+        <Input value={details.cqz ?? ''} className="font-mono"
+          onChange={(e) => setDetails((d) => ({ ...d, cqz: num(e.target.value) }))} />
+      </div>
+      <div className="flex flex-col w-[64px] shrink-0"><Label className="mb-1 h-3.5">{t('field.ituz')}</Label>
+        <Input value={details.ituz ?? ''} className="font-mono"
+          onChange={(e) => setDetails((d) => ({ ...d, ituz: num(e.target.value) }))} />
+      </div>
+      <div className="flex flex-col w-[72px] shrink-0"><Label className="mb-1 h-3.5">{t('field.dxcc')}</Label>
+        <Input value={details.dxcc ?? ''} className="font-mono"
+          onChange={(e) => setDetails((d) => ({ ...d, dxcc: num(e.target.value) }))} />
+      </div>
+    </div>
+  );
   const gridBlock = (
     <div className="flex flex-col w-[76px] shrink-0"><Label className="mb-1 h-3.5">{t('field.grid')}</Label>
       <Input value={grid} placeholder="JN05" className="font-mono" onChange={(e) => { setGrid(e.target.value); markEdited('grid'); }} />
@@ -4780,7 +4888,16 @@ export default function App() {
         const k = spotStatusKey(s.dx_call, s.band ?? '', s.comment ?? '', s.freq_hz);
         const e = spotStatus[k];
         if (!e) return false;
-        if (e.worked_call || e.status === 'worked') return false;
+        // A spot that is NEW for something is not "worked", whatever the entity
+        // says. The extra markers are orthogonal to the entity status — the same
+        // rule the band map already states — so a new prefix, county, grid or
+        // park in an entity worked years ago is exactly what an operator is
+        // hunting, and hiding it is the opposite of what was asked.
+        //
+        // Reported on BH2SWB and 4X9AA: both flagged NEW PFX, neither ever
+        // worked, both vanished the moment "hide worked" went on.
+        const isNew = !!(e.new_pota || e.new_county || e.new_pfx || e.new_grid);
+        if (!isNew && (e.worked_call || e.status === 'worked')) return false;
       }
       return true;
     }
@@ -5797,7 +5914,7 @@ export default function App() {
           Enter from any <input> inside the strip logs the QSO. Radix Selects
           render as <button> elements and are ignored by this handler — they
           keep their own keyboard behaviour. */}
-      <div className={cn(!compact && 'flex gap-2.5 items-stretch px-2.5 pt-2.5 shrink-0')}>
+      <div ref={compactRootRef} className={cn(!compact && 'flex gap-2.5 items-stretch px-2.5 pt-2.5 shrink-0')}>
       <section
         className={cn('bg-card shadow-sm border-border',
           compact
@@ -5852,25 +5969,30 @@ export default function App() {
                 to be pushed outside the entry panel and clipped. Wrapping drops
                 it to its own line instead, which stays readable. */}
             <div className="flex gap-4 items-end flex-wrap">
-              <div className="flex flex-col w-[300px] shrink-0"><Label className="mb-1 h-3.5">Name</Label>
+              <div className="flex flex-col w-[230px] shrink-0"><Label className="mb-1 h-3.5">{t('field.name')}</Label>
                 <Input value={name} onChange={(e) => { setName(e.target.value); markEdited('name'); }}
                   onBlur={() => setName(titleCase)} />
               </div>
               {qthBlock}
+              {stateBlock}
               {gridBlock}
             </div>
 
             {/* Row 3: tight left detail column (Band/Mode/Country) and
-                single-line Comment/Note on the right. */}
+                Comment/Note SIDE BY SIDE on the right — one line each was a lot
+                of vertical space for two fields that are usually short. */}
             <div className="flex gap-4 items-start">
-              <div className="flex flex-col gap-1.5 w-[300px] shrink-0">
+              <div className="flex flex-col gap-1.5 w-[230px] shrink-0">
                 {bandRow}
                 {modeRow}
                 {countryRow}
               </div>
               <div className="flex flex-col gap-1.5 flex-1 min-w-0">
-                {commentLine}
-                {noteLine}
+                {geoDetailRow}
+                <div className="flex gap-4">
+                  <div className="flex-1 min-w-0">{commentLine}</div>
+                  <div className="flex-1 min-w-0">{noteLine}</div>
+                </div>
               </div>
             </div>
 

frontend/src/components/RotorCompass.tsx

@@ -128,7 +128,9 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
         </div>
       )}
 
-      <div className="flex items-center justify-center p-2 min-h-0">
+      {/* flex-col: the readout goes BELOW the dial. This wrapper was a row, so a
+          sibling of the <svg> landed beside it. */}
+      <div className="flex flex-col items-center justify-center p-2 min-h-0">
         <svg
           viewBox={`0 0 ${SIZE} ${SIZE}`}
           className={onGoto ? 'cursor-pointer select-none' : 'select-none'}
@@ -188,6 +190,31 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
           ); })}
           <circle cx={C} cy={C} r={3.5} fill="#15803d" stroke="#fff" strokeWidth={1} />
         </svg>
+
+        {/* Short and long path to the DX, in figures.
+            The bezel already carries the short path as a red marker, but a
+            marker is a direction, not a number — the same pair sits in the
+            status bar at 10px and operators reported not being able to read it.
+            Here because it belongs to the compass: every place that draws one
+            gets the readout, instead of each caller inventing its own.
+            Clickable when the caller can turn, like the status bar's. */}
+        <div className="flex gap-1.5 mt-2 font-mono w-full">
+          {([['SP', bearing ?? null], ['LP', bearing == null ? null : (bearing + 180) % 360]] as const).map(([lbl, az]) => (
+            <button key={lbl} type="button" disabled={az == null || !onGoto}
+              onClick={() => { if (az != null && onGoto) onGoto(Math.round(az)); }}
+              title={az == null ? '' : `${lbl} ${Math.round(az)}°`}
+              className={
+                'flex-1 rounded-md border py-1 text-xs font-semibold tabular-nums transition-colors ' +
+                (az == null
+                  ? 'border-border text-muted-foreground/50 cursor-not-allowed'
+                  : onGoto
+                    ? 'border-info-border text-info-muted-foreground hover:bg-info-muted cursor-pointer'
+                    : 'border-border text-muted-foreground cursor-default')
+              }>
+              {lbl} {az == null ? '—' : `${Math.round(az)}°`}
+            </button>
+          ))}
+        </div>
       </div>
     </section>
   );

frontend/src/components/SettingsModal.tsx

@@ -52,7 +52,7 @@ import {
   GetADIFMonitor, SaveADIFMonitor, PickADIFMonitorFile,
   GetRelayAuto, SaveRelayAuto, GetStationDevices,
   GetAwardDefs, GetTrackedAwards, SaveTrackedAwards,
-  GetBandOpenSettings, SaveBandOpenSettings, GetPSKReporterStatus, GetChaseNewGrids, SetChaseNewGrids, GetGridCacheStatus,
+  GetBandOpenSettings, SaveBandOpenSettings, GetPSKReporterStatus, GetChaseNewGrids, SetChaseNewGrids, GetGridCacheStatus, GetLinkedAmps, SetLinkedAmps, GetSpotTTLMinutes, SetSpotTTLMinutes,
 } from '../../wailsjs/go/main/App';
 import type { profile as profileModels } from '../../wailsjs/go/models';
 import type { LookupSettingsForm, StationSettingsForm, ListsSettingsForm, ModePresetForm } from '@/types';
@@ -1224,6 +1224,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     hamqth_user: '', hamqth_password: '',
     primary: '', failsafe: '',
     download_images: false,
+    qrz_prefer_nickname: false,
     cache_ttl_days: 30,
   });
   // Per-provider Test state — keeps the success/error feedback adjacent
@@ -1273,6 +1274,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   // Amplifier list — operators can run SEVERAL amps (even two SPEs combined),
   // each with its own connection. Saved as a whole via SaveAmplifiers.
   const [amps, setAmps] = useState<AmpUI[]>([]);
+  const [linkedAmps, setLinkedAmps] = useState<string[]>([]);
 
   // WinKeyer CW keyer settings + macro editor.
   type WKMac = { label: string; text: string };
@@ -1441,13 +1443,15 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     tqsl_path: string; station_location: string; key_password: string;
     upload_flags: string[]; write_log: boolean;
     auto_upload: boolean; upload_mode: string;
+    // HRDLog only: publish the live frequency/mode/rig on hrdlog.net.
+    on_air?: boolean;
   };
   type ExternalServices = { qrz: ExtServiceCfg; clublog: ExtServiceCfg; lotw: ExtServiceCfg; hrdlog: ExtServiceCfg; eqsl: ExtServiceCfg; cloudlog: ExtServiceCfg; delete_remote?: boolean };
   const emptyExtCfg = (): ExtServiceCfg => ({
     api_key: '', url: '', station_id: '', email: '', username: '', password: '', callsign: '', code: '', qth_nickname: '',
     force_station_callsign: '', tqsl_path: '', station_location: '', key_password: '',
     upload_flags: ['N', 'R'], write_log: false,
-    auto_upload: false, upload_mode: 'immediate',
+    auto_upload: false, upload_mode: 'immediate', on_air: false,
   });
   const [extSvc, setExtSvc] = useState<ExternalServices>({
     qrz: emptyExtCfg(), clublog: emptyExtCfg(), lotw: emptyExtCfg(), hrdlog: emptyExtCfg(), eqsl: emptyExtCfg(), cloudlog: emptyExtCfg(), delete_remote: false,
@@ -1556,6 +1560,8 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   // feed up or down — so the write has to go where those live.
   const [bandOpen, setBandOpen] = useState<any>({ enabled: false, bands: [], available: [] });
   const [chaseGrids, setChaseGrids] = useState(false);
+  const [spotTTL, setSpotTTL] = useState(0);
+  const [spotTTLText, setSpotTTLText] = useState('0');
   const [gridStat, setGridStat] = useState<any>(null);
   const [pskrStatus, setPskrStatus] = useState<any>(null);
   const saveBandOpen = async (next: any) => {
@@ -1566,6 +1572,8 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     (async () => {
       try { setBandOpen(await GetBandOpenSettings()); } catch { /* defaults stand */ }
       try { setChaseGrids(await GetChaseNewGrids()); } catch { /* defaults stand */ }
+      try { setLinkedAmps((await GetLinkedAmps()) ?? []); } catch { /* defaults stand */ }
+      try { const n = await GetSpotTTLMinutes(); setSpotTTL(n); setSpotTTLText(String(n)); } catch { /* defaults stand */ }
     })();
     // Poll the feed while the panel is open: a live count is the only thing that
     // distinguishes "connected" from "connected and receiving nothing".
@@ -2309,6 +2317,23 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
               </span>
             </span>
           </label>
+
+          {/* QRZ only. HamQTH's <nick> already fills the Name field with the
+              on-air name, so the same switch there would toggle a behaviour it
+              has no way to turn off. */}
+          <label className="flex items-start gap-2 text-sm cursor-pointer mt-3">
+            <Checkbox
+              checked={!!(lookup as any).qrz_prefer_nickname}
+              onCheckedChange={(c) => setLookup((s) => ({ ...s, qrz_prefer_nickname: !!c } as any))}
+              className="mt-0.5"
+            />
+            <span>
+              {t('lk.qrzNickname')}
+              <span className="block text-xs text-muted-foreground mt-0.5">
+                {t('lk.qrzNicknameHint')}
+              </span>
+            </span>
+          </label>
         </div>
 
         <div className="mt-6 pt-4 border-t border-border">
@@ -3579,6 +3604,38 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
             <Plus className="size-3.5 mr-1" /> {t('amp.add')}
           </Button>
 
+          {/* WHICH amplifiers are coupled, not whether coupling is on.
+              A station can run a combiner pair AND a third amplifier that has
+              nothing to do with it — two SPE on the combiner, a PowerGenius on
+              another antenna — so a single switch would send that third one into
+              OPERATE alongside them. Shown from two amplifiers up. */}
+          {amps.length > 1 && (
+            <div className="border-t border-border/60 pt-3 space-y-2">
+              <div className="text-sm">{t('amp.linked')}</div>
+              <p className="text-xs text-muted-foreground">{t('amp.linkedHint')}</p>
+              <div className="flex flex-wrap gap-x-4 gap-y-1.5">
+                {amps.filter((x) => (x.id ?? '') !== '').map((x) => {
+                  const on = linkedAmps.includes(x.id!);
+                  return (
+                    <label key={x.id} className="flex items-center gap-1.5 text-sm cursor-pointer">
+                      <Checkbox checked={on} onCheckedChange={(c) => {
+                        const next = c ? [...linkedAmps, x.id!] : linkedAmps.filter((v) => v !== x.id);
+                        setLinkedAmps(next);
+                        SetLinkedAmps(next).catch(() => {});
+                      }} />
+                      {x.name?.trim() || x.type}
+                    </label>
+                  );
+                })}
+              </div>
+              {/* An amplifier saved without an id cannot be a member — say so
+                  rather than silently leaving it out of the list. */}
+              {amps.some((x) => (x.id ?? '') === '') && (
+                <p className="text-xs text-muted-foreground">{t('amp.linkedSaveFirst')}</p>
+              )}
+            </div>
+          )}
+
         </div>
       </>
     );
@@ -4237,6 +4294,35 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
           {/* Grid chasing. Here rather than in the filter panel because it is set
               up once: it decides whether locators learnt from decodes are KEPT
               across restarts, not what the list shows right now. */}
+          {/* Spot lifetime. Applies to the cluster list AND every band map: the
+              spots are removed from the shared list rather than hidden, so the
+              setting cannot mean one thing in one view and another elsewhere. */}
+          <div className="border-t border-border/60 pt-3 space-y-2">
+            <div className="flex items-center gap-3 flex-wrap">
+              <span className="text-sm">{t('clu.spotTtl')}</span>
+              <div className="inline-flex rounded-md border border-border overflow-hidden text-xs">
+                {[0, 5, 10, 15, 30, 60].map((v) => (
+                  <button key={v} type="button"
+                    onClick={() => { setSpotTTL(v); setSpotTTLText(String(v)); SetSpotTTLMinutes(v).catch(() => {}); }}
+                    className={cn('px-2.5 py-1.5 font-medium', spotTTL === v ? 'bg-primary text-primary-foreground' : 'text-muted-foreground hover:bg-muted')}>
+                    {v === 0 ? t('clu.spotTtlNever') : `${v}′`}
+                  </button>
+                ))}
+              </div>
+              {/* Raw text in local state: binding the input straight to the
+                  clamped number makes an empty field impossible to type into. */}
+              <Input className="h-8 w-20" value={spotTTLText}
+                onChange={(e) => {
+                  const raw = e.target.value.replace(/[^0-9]/g, '');
+                  setSpotTTLText(raw);
+                  const n = Math.min(720, parseInt(raw, 10) || 0);
+                  setSpotTTL(n);
+                  SetSpotTTLMinutes(n).catch(() => {});
+                }} />
+              <span className="text-xs text-muted-foreground">{t('clu.spotTtlHint')}</span>
+            </div>
+          </div>
+
           <div className="border-t border-border/60 pt-3 space-y-2">
             <label className="flex items-start gap-2 text-sm cursor-pointer">
               <Checkbox checked={chaseGrids} className="mt-0.5"
@@ -4969,6 +5055,20 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                 {t('es.autoUpload')}
               </label>
 
+              {/* ON AIR is a live status, not an upload: it needs the rig
+                  readable, not a QSO. Its own switch beside the upload one
+                  rather than folded into it. */}
+              <label className="flex items-start gap-2 text-sm cursor-pointer">
+                <Checkbox className="mt-0.5"
+                  checked={!!(hrdlog as any).on_air}
+                  onCheckedChange={(c) => setHrdlog({ on_air: !!c } as any)}
+                />
+                <span>
+                  {t('es.hrdOnAir')}
+                  <span className="block text-xs text-muted-foreground mt-0.5">{t('es.hrdOnAirHint')}</span>
+                </span>
+              </label>
+
               <div className="grid grid-cols-[170px_1fr] gap-3 items-center">
                 <Label className="text-sm">{t('es.uploadTiming')}</Label>
                 <Select

frontend/src/components/StationControlPanel.tsx

@@ -77,6 +77,8 @@ function RotatorWidget({ hd, refetch, centerLat, centerLon, bearing, t }: Rotato
           title={hd.ok ? t('station.online') : t('station.rotatorNoRead')} />
       </div>
       <div className="p-3 flex gap-4 items-start">
+        {/* The SP/LP readout lives INSIDE RotorCompass, so every compass in the
+            app carries it rather than each caller drawing its own. */}
         <RotorCompass
           bearing={bearing ?? null}
           headings={hd.ok ? [hd.azimuth] : []}

frontend/src/components/qsl/QslDesignerModal.tsx

@@ -13,6 +13,7 @@ import { Checkbox } from '@/components/ui/checkbox';
 import { Label } from '@/components/ui/label';
 import {
   QSLPickPhotos, QSLGenerateProposals, QSLListTemplates, QSLGetTemplate,
+  QSLListOtherProfileTemplates, QSLCopyTemplateToActiveProfile,
   QSLSaveTemplate, QSLSetDefaultTemplate, QSLDeleteTemplate, QSLSavePreview,
   QSLPreviewDataURL, QSLResolvePreview, QSLStylePresets,
 } from '../../../wailsjs/go/main/App';
@@ -59,6 +60,7 @@ export function QslDesignerModal({ open, onClose }: Props) {
   const [busy, setBusy] = useState(false);
   const [error, setError] = useState('');
   const [saved, setSaved] = useState<QSLTemplateInfo[]>([]);
+  const [foreign, setForeign] = useState<any[]>([]);
   const [previews, setPreviews] = useState<Record<number, string>>({});
   const [presets, setPresets] = useState<QSLPresetInfo[]>([]);
   const [fontFamilies, setFontFamilies] = useState<string[]>([]);
@@ -88,6 +90,8 @@ export function QslDesignerModal({ open, onClose }: Props) {
         if (url) p[t.id] = url;
       }));
       setPreviews(p);
+      // The designs this profile cannot see, offered for copying.
+      try { setForeign(((await QSLListOtherProfileTemplates()) ?? []) as any[]); } catch { /* nothing to offer */ }
     } catch (e) {
       setError(String(e));
     }
@@ -274,7 +278,29 @@ export function QslDesignerModal({ open, onClose }: Props) {
             </section>
 
             <section className="space-y-2">
+              <div className="flex items-center gap-3">
                 <h3 className="text-sm font-semibold">Saved templates</h3>
+                {/* Designs owned by another profile. A second profile is usually
+                    the same operator with a different rig or locator — same
+                    callsign, same cards — and redrawing one because the antenna
+                    changed is work nobody should have to do. */}
+                {!!foreign.length && (
+                  <select
+                    value=""
+                    onChange={async (e) => {
+                      const id = parseInt(e.target.value, 10);
+                      if (!id) return;
+                      try { await QSLCopyTemplateToActiveProfile(id); await refreshSaved(); }
+                      catch (err) { setError(String(err)); }
+                    }}
+                    className="h-7 rounded-md border border-border bg-background px-2 text-xs">
+                    <option value="">Copy from another profile…</option>
+                    {foreign.map((f) => (
+                      <option key={f.id} value={f.id}>{f.profile_name} — {f.name}</option>
+                    ))}
+                  </select>
+                )}
+              </div>
               {!saved.length && <p className="text-xs text-muted-foreground">None yet.</p>}
               <div className="grid grid-cols-3 gap-3">
                 {saved.map((t) => (

frontend/src/lib/i18n.tsx

@@ -54,7 +54,7 @@ const en: Dict = {
   'tab.main': 'Main', 'main.splitTip': 'Drag to resize the panes — double-click to even them out', 'tab.recent': 'Recent QSOs', 'tab.cluster': 'Cluster', 'tab.worked': 'Worked before',
   'tab.awards': 'Awards', 'tab.bandmap': 'Band Map', 'tab.contest': 'Contest', 'tab.net': 'Net',
   // Entry form
-  'field.callsign': 'Callsign', 'field.name': 'Name', 'field.qth': 'QTH', 'field.grid': 'Grid',
+  'field.callsign': 'Callsign', 'field.name': 'Name', 'field.qth': 'QTH', 'field.state': 'State', 'field.cnty': 'County', 'field.cqz': 'CQ', 'field.ituz': 'ITU', 'field.dxcc': 'DXCC', 'field.grid': 'Grid',
   'field.band': 'Band', 'field.mode': 'Mode', 'field.country': 'Country', 'field.comment': 'Comment',
   'field.note': 'Note', 'field.rstTx': 'RST tx', 'field.rstRx': 'RST rx',
   'field.txFreq': 'TX Freq (MHz)', 'field.freqTuneHint': 'Type a frequency and press Enter to tune the radio here.', 'field.freq': 'Freq (MHz)', 'field.rxFreq': 'RX Freq (MHz)', 'field.rxBand': 'RX Band',
@@ -155,7 +155,7 @@ const en: Dict = {
   'uscty.backfillIntro': 'Resolve county (and grid) for US QSOs already in your log that are missing them. Existing values are kept — only blanks are filled.',
   'uscty.backfillRun': 'Fill missing counties',
   'uscty.backfillDone': '{s} US QSOs scanned · {c} counties, {g} grids filled.',
-  'station.title': 'Station Control', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'No heading read', 'station.bands': 'Bands', 'station.nudgeUp': 'Up {n} kHz', 'station.nudgeDown': 'Down {n} kHz', 'station.trackOn': 'Tracking on', 'station.trackOff': 'Tracking off', 'station.trackStepTip': 'Re-tune only when the rig has moved this far', 'station.trackModeTip': 'When the antenna is allowed to re-tune', 'station.trackAlways': 'Every frequency change', 'station.trackStep': 'Past a step', 'station.trackBand': 'Band change only', 'station.trackAlwaysTip': 'Follow every frequency change. Best resonance, but the motors run constantly — and on a SteppIR every move blocks transmit while the elements travel.', 'station.trackStepTipMode': 'Re-tune only once the rig has moved further than the step. Follows a QSY, ignores tuning around.', 'station.trackBandTip': 'Re-tune only when the band changes. The motors move a few times a day and are left alone within a band.', 'station.pattern': 'Pattern', 'station.bi': 'Bi', 'station.retract': 'Retract elements', 'station.moving': 'MOVING', 'station.elements': 'Elements (mm)', 'station.read': 'Read', 'station.readLengths': 'Read current element lengths from the controller', 'station.noLengths': 'Lengths unknown — click Read to fetch them from the controller.', 'station.element': 'Element', 'station.reflector': 'Reflector', 'station.driven': 'Driven', 'station.director': 'Dir', 'station.set': 'Set', 'station.elementsHint': 'Each press lengthens/shortens the element by 2 mm (like the physical console). Verify which element responds on your antenna.', 'station.setExactLen': 'Click to type the exact current length (fixes the baseline if the auto-read is off).', 'station.atMax': 'Controller refused — the element is likely at its maximum length for this band, so it can\'t extend further.', 'station.go': 'Go', 'station.stop': 'Stop', 'station.dragHint': 'Drag the grip handle on the left of a panel to move it. Pick a column count to lay them out in a grid.', 'station.dragMove': 'Drag to move this panel', 'station.colsAuto': 'Auto', 'station.addDevice': 'Add device', 'station.editDevice': 'Edit device', 'station.empty': 'No relay boards yet. Add a WebSwitch 1216H or a KMTronic 8-relay board to control your station power and accessories.', 'station.online': 'Online', 'station.offline': 'Offline', 'station.edit': 'Edit', 'station.delete': 'Delete', 'station.relay': 'Relay', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': 'Device type', 'station.name': 'Name', 'station.host': 'Host / IP', 'station.hostHint': 'LAN IP for local use. To reach the board from OUTSIDE, put a full URL here — e.g. https://relay.yourdomain.com — pointing at a reverse proxy (Nginx Proxy Manager…) that fronts the board’s HTTP port.', 'station.user': 'Username', 'station.pass': 'Password', 'station.optional': 'optional', 'station.ftdiSerial': 'FTDI serial number', 'station.detect': 'Detect', 'station.ftdiHint': 'The Denkovi board is driven via FTDI bit-bang (not the COM port). Pick its serial (e.g. DAE0006K). Needs the FTDI D2XX driver installed.', 'station.channels': 'Relays', 'station.comPort': 'COM port', 'station.noPorts': 'No ports found', 'station.usbRelayHint': 'Cheap USB-serial relay boards (CH340/LCUS) using the A0 command protocol. If yours does not switch, tell me its model / command set.', 'station.labels': 'Relay labels', 'station.cancel': 'Cancel', 'station.save': 'Save', 'station.test': 'Test connection', 'station.testOk': 'Connected — {n} relays', 'station.testFail': 'Not connected', 'station.detectNone': 'No FTDI board found — check the cable and that the D2XX driver is installed.', 'station.detectFound': '{n} board(s) detected.',
+  'station.title': 'Station Control', 'station.rotator': 'Rotator', 'station.rotateTo': 'Rotate to {az}°', 'station.rotatorNoRead': 'No heading read', 'station.bands': 'Bands', 'station.nudgeUp': 'Up {n} kHz', 'station.nudgeDown': 'Down {n} kHz', 'station.trackOn': 'Tracking on', 'station.trackOff': 'Tracking off', 'station.trackStepTip': 'Re-tune only when the rig has moved this far', 'station.trackModeTip': 'When the antenna is allowed to re-tune', 'station.trackAlways': 'Every frequency change', 'station.trackStep': 'Past a step', 'station.trackBand': 'Band change only', 'station.trackAlwaysTip': 'Follow every frequency change. Best resonance, but the motors run constantly — and on a SteppIR every move blocks transmit while the elements travel.', 'station.trackStepTipMode': 'Re-tune only once the rig has moved further than the step. Follows a QSY, ignores tuning around.', 'station.trackBandTip': 'Re-tune only when the band changes. The motors move a few times a day and are left alone within a band.', 'station.pattern': 'Pattern', 'station.bi': 'Bi', 'station.retract': 'Retract elements', 'station.moving': 'MOVING', 'station.elements': 'Elements (mm)', 'station.read': 'Read', 'station.readLengths': 'Read current element lengths from the controller', 'station.noLengths': 'Lengths unknown — click Read to fetch them from the controller.', 'station.element': 'Element', 'station.reflector': 'Reflector', 'station.driven': 'Driven', 'station.director': 'Dir', 'station.set': 'Set', 'station.elementsHint': 'Each press lengthens/shortens the element by 2 mm (like the physical console). Verify which element responds on your antenna.', 'station.setExactLen': 'Click to type the exact current length (fixes the baseline if the auto-read is off).', 'station.atMax': 'Controller refused — the element is likely at its maximum length for this band, so it can\'t extend further.', 'station.go': 'Go', 'station.stop': 'Stop', 'station.dragHint': 'Drag the grip handle on the left of a panel to move it. Pick a column count to lay them out in a grid.', 'station.dragMove': 'Drag to move this panel', 'station.colsAuto': 'Auto', 'station.addDevice': 'Add device', 'station.editDevice': 'Edit device', 'station.empty': 'No relay boards yet. Add a WebSwitch 1216H or a KMTronic 8-relay board to control your station power and accessories.', 'station.online': 'Online', 'station.offline': 'Offline', 'station.edit': 'Edit', 'station.delete': 'Delete', 'station.relay': 'Relay', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': 'Device type', 'station.name': 'Name', 'station.host': 'Host / IP', 'station.hostHint': 'LAN IP for local use. To reach the board from OUTSIDE, put a full URL here — e.g. https://relay.yourdomain.com — pointing at a reverse proxy (Nginx Proxy Manager…) that fronts the board’s HTTP port.', 'station.user': 'Username', 'station.pass': 'Password', 'station.optional': 'optional', 'station.ftdiSerial': 'FTDI serial number', 'station.detect': 'Detect', 'station.ftdiHint': 'The Denkovi board is driven via FTDI bit-bang (not the COM port). Pick its serial (e.g. DAE0006K). Needs the FTDI D2XX driver installed.', 'station.channels': 'Relays', 'station.comPort': 'COM port', 'station.noPorts': 'No ports found', 'station.usbRelayHint': 'Cheap USB-serial relay boards (CH340/LCUS) using the A0 command protocol. If yours does not switch, tell me its model / command set.', 'station.labels': 'Relay labels', 'station.cancel': 'Cancel', 'station.save': 'Save', 'station.test': 'Test connection', 'station.testOk': 'Connected — {n} relays', 'station.testFail': 'Not connected', 'station.detectNone': 'No FTDI board found — check the cable and that the D2XX driver is installed.', 'station.detectFound': '{n} board(s) detected.',
   'awards.followHint': 'Awards shown in the Awards tab. Leave the right side empty to show them all.', 'awards.available': 'All awards', 'awards.followed': 'Followed', 'awards.search': 'Filter…', 'awards.addAll': 'Add all', 'awards.clear': 'Clear', 'awards.allTracked': 'All awards are followed.', 'awards.noneFollowed': 'Nothing followed yet — the Awards tab shows all.',
   'sec.awards': 'Awards', 'sec.cat': 'CAT interface', 'sec.rotator': 'Rotator', 'sec.winkeyer': 'CW Keyer',
   'sec.antenna': 'Ultrabeam / Steppir', 'sec.antgenius': 'Antenna Genius', 'sec.tunergenius': 'Tuner Genius', 'sec.pgxl': 'Amplifier', 'sec.flex': 'FlexRadio', 'sec.audio': 'Audio devices',
@@ -190,7 +190,7 @@ const en: Dict = {
   'gen.showBeam': 'Show the antenna beam heading on the Main map',
   'gen.startEqEnd': 'QSO start time = end time', 'gen.startEqEndHint': '(matches LoTW when you call a while)',
   'gen.showQsoRate': 'Show QSO rate in the header', 'gen.showQsoRateHint': '(QSOs/hour, projected from the last 10 / 60 min)',
-  'gen.lookupOnBlur': 'Look up the callsign only after leaving the field', 'gen.lookupOnBlurHint': '(not while typing)', 'amp.hint': 'Configure one or several amplifiers — each panel card has a dropdown to pick which one it shows.', 'amp.none': 'No amplifier configured yet.', 'amp.namePh': 'Name (e.g. SPE left)', 'amp.remove': 'Remove this amplifier', 'amp.add': 'Add amplifier', 'amp.password': 'Remote code', 'amp.passwordPh': 'blank on LAN', 'amp.passwordHint': 'PowerGenius XL only: needed when reaching the amp remotely — it then announces "AUTH" and rejects every command ("Unauthorized") until you log in. Leave blank on the local network.', 'amp.freqOut': 'Send the frequency to the amplifier (band follow)', 'amp.freqPort': 'CAT/AUX COM port', 'amp.freqBroadcast': 'Also send unprompted', 'amp.freqPollOnly': 'No — answer the amplifier only', 'amp.freqEvery': 'Yes, every {ms} ms', 'amp.freqHint': 'OpsLog pretends to be a transceiver on this second port, in Kenwood format: set the amplifier to that command set (set 5 on an ACOM) at the same baud rate, and put it in OPERATE — in standby it acknowledges but does not switch band. An amplifier that POLLS (ACOM) needs nothing more; one that only LISTENS to the CAT line of the radio hears nothing unless you also turn on the unprompted send.',
+  'gen.lookupOnBlur': 'Look up the callsign only after leaving the field', 'gen.lookupOnBlurHint': '(not while typing)', 'amp.hint': 'Configure one or several amplifiers — each panel card has a dropdown to pick which one it shows.', 'amp.linked': 'Amplifiers commanded together', 'amp.linkedHint': 'Tick the ones sharing a combiner: ON, OFF and OPERATE will act on all of them at once, since one left in STANDBY would feed power to a single input. Any amplifier left unticked keeps its own buttons. Each keeps its own meters.', 'amp.linkedSaveFirst': 'Save first — an amplifier needs an id before it can join a group.', 'amp.none': 'No amplifier configured yet.', 'amp.namePh': 'Name (e.g. SPE left)', 'amp.remove': 'Remove this amplifier', 'amp.add': 'Add amplifier', 'amp.password': 'Remote code', 'amp.passwordPh': 'blank on LAN', 'amp.passwordHint': 'PowerGenius XL only: needed when reaching the amp remotely — it then announces "AUTH" and rejects every command ("Unauthorized") until you log in. Leave blank on the local network.', 'amp.freqOut': 'Send the frequency to the amplifier (band follow)', 'amp.freqPort': 'CAT/AUX COM port', 'amp.freqBroadcast': 'Also send unprompted', 'amp.freqPollOnly': 'No — answer the amplifier only', 'amp.freqEvery': 'Yes, every {ms} ms', 'amp.freqHint': 'OpsLog pretends to be a transceiver on this second port, in Kenwood format: set the amplifier to that command set (set 5 on an ACOM) at the same baud rate, and put it in OPERATE — in standby it acknowledges but does not switch band. An amplifier that POLLS (ACOM) needs nothing more; one that only LISTENS to the CAT line of the radio hears nothing unless you also turn on the unprompted send.',
   'gen.groupDigital': 'Group digital modes as one (DXCC-style)', 'gen.groupDigitalHint': '(matrix badges + cluster: FT8/FT4/RTTY… count as a single Digital mode; off = each digital mode is its own slot)',
   // Password encryption
   'gen.pwEnc': 'Password encryption',
@@ -243,7 +243,7 @@ const en: Dict = {
   'lk.provider': 'Provider', 'lk.primary': 'Primary', 'lk.failsafe': 'Failsafe', 'lk.user': 'User', 'lk.password': 'Password', 'lk.result': 'Result',
   'lk.testing': 'Testing…', 'lk.test': 'Test', 'lk.testTitle': "Run a sample lookup against the active profile's callsign to verify credentials",
   'lk.failsafeNote': 'Failsafe is consulted only when the Primary returns no match or errors. Set both to none (uncheck) during contests to skip the network entirely.',
-  'lk.display': 'Display', 'lk.showPics': 'Show QRZ profile pictures',
+  'lk.display': 'Display', 'lk.qrzNickname': 'QRZ.com: use the nickname as the name', 'lk.qrzNicknameHint': 'Logs the name the operator goes by on the air rather than their registered first and last name. Falls back to the full name when no nickname is published. QRZ.com only — HamQTH already does this.', 'lk.showPics': 'Show QRZ profile pictures',
   'lk.showPicsHint': 'Display the photo from QRZ.com next to the worked-before matrix. May noticeably slow lookups during busy contest days; turn off if you operate fast.',
   'lk.cache': 'Cache', 'lk.cacheHint': "Successful lookups are cached locally so the same callsign isn't fetched twice. TTL controls how long before a fresh query is made.",
   'lk.ttl': 'TTL (days)', 'lk.clearing': 'Clearing…', 'lk.clearCache': 'Clear cache now',
@@ -270,7 +270,7 @@ const en: Dict = {
   'clu.muteWorkedHint': '(they stay in the list, just quiet — leaves the colour for what is left to do)',
   'clu.slotHighlight': 'Colour the stations not worked on this band and mode',
   'clu.slotHighlightHint': '(by callsign, whatever the entity status says)',
-  'bo.open': 'open', 'bo.liveTip': '{band} is open — {n} stations, ~{km} km, {sector}{season}. Click for the band map.', 'bo.enable': 'Watch for band openings', 'bo.enableHint': '(10, 12, 6, 4 and 2 m. Switching this on adds the two RBN nodes and subscribes to the PSK Reporter feed — the detection needs far more ears than a cluster can give it.)', 'bo.feedUp': 'PSK Reporter feed up — {n} decodes seen', 'bo.feedDown': 'PSK Reporter feed down — needs your station grid, and a moment to connect', 'clu.chaseGrids': 'Chase new grids', 'clu.chaseGridsHint': '(learns locators from your own WSJT-X decodes AND from PSK Reporter, and keeps them in their own database so the cluster shows them from the first second)', 'clu.chaseGridsStat': '{n} locators known — {p} waiting to be written', 'clu.workedSameSlot': 'Already worked only on the same slot',
+  'bo.open': 'open', 'bo.liveTip': '{band} is open — {n} stations, ~{km} km, {sector}{season}. Click for the band map.', 'bo.enable': 'Watch for band openings', 'bo.enableHint': '(10, 12, 6, 4 and 2 m. Switching this on adds the two RBN nodes and subscribes to the PSK Reporter feed — the detection needs far more ears than a cluster can give it.)', 'bo.feedUp': 'PSK Reporter feed up — {n} decodes seen', 'bo.feedDown': 'PSK Reporter feed down — needs your station grid, and a moment to connect', 'clu.spotTtl': 'Spot lifetime', 'clu.spotTtlNever': 'Keep', 'clu.spotTtlHint': 'minutes — spots older than this are removed from the list and the band maps. 0 keeps them.', 'clu.chaseGrids': 'Chase new grids', 'clu.chaseGridsHint': '(learns locators from your own WSJT-X decodes AND from PSK Reporter, and keeps them in their own database so the cluster shows them from the first second)', 'clu.chaseGridsStat': '{n} locators known — {p} waiting to be written', 'clu.workedSameSlot': 'Already worked only on the same slot',
   'clu.workedSameSlotHint': '— a spot shows "worked" only if you worked that call on the SAME band and mode, not just anywhere. Combines with digital-mode grouping (Settings → General): with it on, a call worked on 20m FT8 also counts as worked for a 20m FT4 spot; with it off, FT8 and FT4 are separate slots.',
   // Backup panel
   'bk.hintMysql': 'On close (once/day) OpsLog snapshots the local SQLite (config) AND exports the shared MySQL log to ADIF — opslog-log-<date>.adi — so your contacts are protected even though they live on the server. Rotation keeps the last N of each.',
@@ -304,7 +304,7 @@ const en: Dict = {
   // External-services placeholders + HRDLOG / eQSL / LoTW / POTA tabs
   'es.qrzApiPh': 'QRZ.com logbook API key (XXXX-XXXX-XXXX-XXXX)', 'es.forceCallPh': 'e.g. F4BPO — optional', 'es.callDefaultPh': "defaults to the active profile's callsign",
   'es.clubEmailPh': 'your Club Log account email', 'es.clubPwPh': 'Club Log account password',
-  'es.stationCall': 'Station callsign', 'es.uploadCode': 'Upload code', 'es.hrdCodePh': 'HRDLog account → My Account → Upload code', 'es.hrdHint': 'Find the upload code on HRDLog.net under My Account. It authorises uploads for this callsign.',
+  'es.stationCall': 'Station callsign', 'es.uploadCode': 'Upload code', 'es.hrdCodePh': 'HRDLog account → My Account → Upload code', 'es.hrdOnAir': 'Announce ON AIR on hrdlog.net', 'es.hrdOnAirHint': 'Publishes your live frequency, mode and rig on the site while the radio is readable, refreshed every two minutes. Needs the callsign and upload code above.', 'es.hrdHint': 'Find the upload code on HRDLog.net under My Account. It authorises uploads for this callsign.',
   'es.usernameCall': 'Username (callsign)', 'es.eqslUserPh': 'your eQSL.cc login (callsign)', 'es.eqslPwPh': 'eQSL.cc account password', 'es.qthNick': 'QTH nickname', 'es.qthNickPh': 'optional — required only if your eQSL account has several QTHs', 'es.eqslHint': 'The QTH nickname tells eQSL which location profile to file the QSO under. Leave blank if you have only one.',
   'es.lotwUser': 'LoTW user', 'es.lotwUserPh': 'LoTW website login (for downloading confirmations)', 'es.lotwPw': 'LoTW password', 'es.lotwPwPh': 'LoTW website password', 'es.tqslPath': 'TQSL path', 'es.stationLoc': 'Station location', 'es.pickLoc': '— pick a TQSL location —', 'es.noLoc': 'No TQSL locations found', 'es.reloadLoc': 'Reload locations from TQSL', 'es.lotwForcePh': "e.g. F4BPO/P — leave blank to use the QSO's own call", 'es.lotwForceHint': 'Overrides STATION_CALLSIGN at sign time so one certificate can sign several calls (F4BPO, F4BPO/P, TM2Q). Pick the matching Station Location above.', 'es.keyPw': 'Key password', 'es.keyPwPh': 'only if your certificate key has a password', 'es.considerUnsent': 'Consider as unsent', 'es.flagN': 'No (N)', 'es.flagR': 'Requested (R)', 'es.lotwUnsentHint': "At app close, every QSO whose LoTW sent status is one of these is signed and uploaded in one TQSL batch — including QSOs imported from an ADIF. Uploaded QSOs become Y and won't be re-sent. Must include your default sent status from Confirmations.", 'es.lotwAutoClose': 'Automatic upload on application close', 'es.lotwWriteLog': 'Write TQSL diagnostic log (-t)',
   'es.potaHint': 'Update your QSOs with the park reference from your pota.app hunter log. Paste your session token: log in at pota.app, open the browser DevTools → Network tab, click any api.pota.app request, and copy the full Authorization header value. The token expires after a while — re-copy it if the sync fails.', 'es.sessionToken': 'Session token', 'es.saving': 'Saving…', 'es.saveToken': 'Save token', 'es.potaThen': 'Then run the sync from the QSL Manager tab → service POTA hunter log (you can see and fix unmatched QSOs there).',
@@ -482,7 +482,7 @@ const fr: Dict = {
   'profileScope.saved': 'Enregistré pour le profil', 'profileScope.switch': "— change de profil pour éditer une autre identité.",
   'tab.main': 'Principal', 'main.splitTip': 'Faites glisser pour redimensionner les volets — double-clic pour les égaliser', 'tab.recent': 'QSO récents', 'tab.cluster': 'Cluster', 'tab.worked': 'Déjà contacté',
   'tab.awards': 'Diplômes', 'tab.bandmap': 'Carte de bande', 'tab.contest': 'Contest', 'tab.net': 'NET',
-  'field.callsign': 'Indicatif', 'field.name': 'Nom', 'field.qth': 'QTH', 'field.grid': 'Locator',
+  'field.callsign': 'Indicatif', 'field.name': 'Nom', 'field.qth': 'QTH', 'field.state': 'État', 'field.cnty': 'Comté', 'field.cqz': 'CQ', 'field.ituz': 'ITU', 'field.dxcc': 'DXCC', 'field.grid': 'Locator',
   'field.band': 'Bande', 'field.mode': 'Mode', 'field.country': 'Pays', 'field.comment': 'Commentaire',
   'field.note': 'Note', 'field.rstTx': 'RST tx', 'field.rstRx': 'RST rx',
   'field.txFreq': 'Fréq TX (MHz)', 'field.freqTuneHint': 'Tape une fréquence et appuie sur Entrée pour y accorder la radio.', 'field.freq': 'Fréq (MHz)', 'field.rxFreq': 'Fréq RX (MHz)', 'field.rxBand': 'Bande RX',
@@ -582,7 +582,7 @@ const fr: Dict = {
   'uscty.backfillIntro': "Résout le comté (et le locator) pour les QSO US déjà dans ton log qui n'en ont pas. Les valeurs existantes sont conservées — seuls les vides sont remplis.",
   'uscty.backfillRun': 'Remplir les comtés manquants',
   'uscty.backfillDone': '{s} QSO US analysés · {c} comtés, {g} locators remplis.',
-  'station.title': 'Contrôle station', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'Azimut non lu', 'station.bands': 'Bandes', 'station.nudgeUp': 'Monter de {n} kHz', 'station.nudgeDown': 'Descendre de {n} kHz', 'station.trackOn': 'Suivi actif', 'station.trackOff': 'Suivi inactif', 'station.trackStepTip': 'Ne réaccorder que si le rig a bougé d au moins ça', 'station.trackModeTip': "Quand l'antenne a le droit de se réaccorder", 'station.trackAlways': 'À chaque changement', 'station.trackStep': 'Au-delà d un pas', 'station.trackBand': 'Changement de bande', 'station.trackAlwaysTip': "Suivre chaque changement de fréquence. Résonance idéale, mais les moteurs tournent en permanence — et sur une SteppIR chaque déplacement bloque l'émission le temps du mouvement.", 'station.trackStepTipMode': "Ne réaccorder qu'une fois le rig sorti du pas. Suit un QSY, ignore la recherche autour.", 'station.trackBandTip': "Ne réaccorder qu'au changement de bande. Les moteurs bougent quelques fois par jour et restent tranquilles dans une bande.", 'station.pattern': 'Diagramme', 'station.bi': 'Bi', 'station.retract': 'Rétracter les éléments', 'station.moving': 'EN MOUVEMENT', 'station.elements': 'Éléments (mm)', 'station.read': 'Lire', 'station.readLengths': 'Lire les longueurs actuelles depuis le contrôleur', 'station.noLengths': 'Longueurs inconnues — clique sur Lire pour les récupérer depuis le contrôleur.', 'station.element': 'Élément', 'station.reflector': 'Réflecteur', 'station.driven': 'Radiateur', 'station.director': 'Dir', 'station.set': 'Régler', 'station.elementsHint': "Chaque appui allonge/raccourcit l'élément de 2 mm (comme le pupitre). Vérifie quel élément répond sur ton antenne.", 'station.setExactLen': "Clique pour taper la longueur actuelle exacte (recale la base si la lecture auto est fausse).", 'station.atMax': "Refusé par le contrôleur — l'élément est probablement en butée (longueur max pour cette bande), il ne peut plus s'allonger.", 'station.go': 'Aller', 'station.stop': 'Stop', 'station.dragHint': 'Glisse la poignée à gauche d un panneau pour le déplacer. Choisis un nombre de colonnes pour la disposition.', 'station.dragMove': 'Glisser pour déplacer ce panneau', 'station.colsAuto': 'Auto', 'station.addDevice': 'Ajouter un appareil', 'station.editDevice': "Modifier l'appareil", 'station.empty': "Aucune carte relais. Ajoute un WebSwitch 1216H ou une carte KMTronic 8 relais pour piloter l'alimentation et les accessoires de ta station.", 'station.online': 'En ligne', 'station.offline': 'Hors ligne', 'station.edit': 'Modifier', 'station.delete': 'Supprimer', 'station.relay': 'Relais', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': "Type d'appareil", 'station.name': 'Nom', 'station.host': 'Hôte / IP', 'station.hostHint': "IP du LAN en local. Pour joindre la carte depuis L'EXTÉRIEUR, saisis une URL complète ici — ex. https://relais.tondomaine.com — pointant vers un reverse proxy (Nginx Proxy Manager…) qui expose le port HTTP de la carte.", 'station.user': "Nom d'utilisateur", 'station.pass': 'Mot de passe', 'station.optional': 'optionnel', 'station.ftdiSerial': 'Numéro de série FTDI', 'station.detect': 'Détecter', 'station.ftdiHint': "La carte Denkovi se pilote en FTDI bit-bang (pas via le port COM). Choisis son numéro de série (ex. DAE0006K). Nécessite le driver FTDI D2XX installé.", 'station.channels': 'Relais', 'station.comPort': 'Port COM', 'station.noPorts': 'Aucun port', 'station.usbRelayHint': "Cartes USB-série bon marché (CH340/LCUS) protocole A0. Si la tienne ne commute pas, donne-moi le modèle / jeu de commandes.", 'station.labels': 'Libellés des relais', 'station.cancel': 'Annuler', 'station.save': 'Enregistrer', 'station.test': 'Tester la connexion', 'station.testOk': 'Connecté — {n} relais', 'station.testFail': 'Non connecté', 'station.detectNone': 'Aucune carte FTDI trouvée — vérifie le câble et que le driver D2XX est installé.', 'station.detectFound': '{n} carte(s) détectée(s).',
+  'station.title': 'Contrôle station', 'station.rotator': 'Rotator', 'station.rotateTo': 'Tourner vers {az}°', 'station.rotatorNoRead': 'Azimut non lu', 'station.bands': 'Bandes', 'station.nudgeUp': 'Monter de {n} kHz', 'station.nudgeDown': 'Descendre de {n} kHz', 'station.trackOn': 'Suivi actif', 'station.trackOff': 'Suivi inactif', 'station.trackStepTip': 'Ne réaccorder que si le rig a bougé d au moins ça', 'station.trackModeTip': "Quand l'antenne a le droit de se réaccorder", 'station.trackAlways': 'À chaque changement', 'station.trackStep': 'Au-delà d un pas', 'station.trackBand': 'Changement de bande', 'station.trackAlwaysTip': "Suivre chaque changement de fréquence. Résonance idéale, mais les moteurs tournent en permanence — et sur une SteppIR chaque déplacement bloque l'émission le temps du mouvement.", 'station.trackStepTipMode': "Ne réaccorder qu'une fois le rig sorti du pas. Suit un QSY, ignore la recherche autour.", 'station.trackBandTip': "Ne réaccorder qu'au changement de bande. Les moteurs bougent quelques fois par jour et restent tranquilles dans une bande.", 'station.pattern': 'Diagramme', 'station.bi': 'Bi', 'station.retract': 'Rétracter les éléments', 'station.moving': 'EN MOUVEMENT', 'station.elements': 'Éléments (mm)', 'station.read': 'Lire', 'station.readLengths': 'Lire les longueurs actuelles depuis le contrôleur', 'station.noLengths': 'Longueurs inconnues — clique sur Lire pour les récupérer depuis le contrôleur.', 'station.element': 'Élément', 'station.reflector': 'Réflecteur', 'station.driven': 'Radiateur', 'station.director': 'Dir', 'station.set': 'Régler', 'station.elementsHint': "Chaque appui allonge/raccourcit l'élément de 2 mm (comme le pupitre). Vérifie quel élément répond sur ton antenne.", 'station.setExactLen': "Clique pour taper la longueur actuelle exacte (recale la base si la lecture auto est fausse).", 'station.atMax': "Refusé par le contrôleur — l'élément est probablement en butée (longueur max pour cette bande), il ne peut plus s'allonger.", 'station.go': 'Aller', 'station.stop': 'Stop', 'station.dragHint': 'Glisse la poignée à gauche d un panneau pour le déplacer. Choisis un nombre de colonnes pour la disposition.', 'station.dragMove': 'Glisser pour déplacer ce panneau', 'station.colsAuto': 'Auto', 'station.addDevice': 'Ajouter un appareil', 'station.editDevice': "Modifier l'appareil", 'station.empty': "Aucune carte relais. Ajoute un WebSwitch 1216H ou une carte KMTronic 8 relais pour piloter l'alimentation et les accessoires de ta station.", 'station.online': 'En ligne', 'station.offline': 'Hors ligne', 'station.edit': 'Modifier', 'station.delete': 'Supprimer', 'station.relay': 'Relais', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': "Type d'appareil", 'station.name': 'Nom', 'station.host': 'Hôte / IP', 'station.hostHint': "IP du LAN en local. Pour joindre la carte depuis L'EXTÉRIEUR, saisis une URL complète ici — ex. https://relais.tondomaine.com — pointant vers un reverse proxy (Nginx Proxy Manager…) qui expose le port HTTP de la carte.", 'station.user': "Nom d'utilisateur", 'station.pass': 'Mot de passe', 'station.optional': 'optionnel', 'station.ftdiSerial': 'Numéro de série FTDI', 'station.detect': 'Détecter', 'station.ftdiHint': "La carte Denkovi se pilote en FTDI bit-bang (pas via le port COM). Choisis son numéro de série (ex. DAE0006K). Nécessite le driver FTDI D2XX installé.", 'station.channels': 'Relais', 'station.comPort': 'Port COM', 'station.noPorts': 'Aucun port', 'station.usbRelayHint': "Cartes USB-série bon marché (CH340/LCUS) protocole A0. Si la tienne ne commute pas, donne-moi le modèle / jeu de commandes.", 'station.labels': 'Libellés des relais', 'station.cancel': 'Annuler', 'station.save': 'Enregistrer', 'station.test': 'Tester la connexion', 'station.testOk': 'Connecté — {n} relais', 'station.testFail': 'Non connecté', 'station.detectNone': 'Aucune carte FTDI trouvée — vérifie le câble et que le driver D2XX est installé.', 'station.detectFound': '{n} carte(s) détectée(s).',
   'awards.followHint': 'Diplômes affichés dans l’onglet Awards. Laisse la colonne de droite vide pour tous les afficher.', 'awards.available': 'Tous les diplômes', 'awards.followed': 'Suivis', 'awards.search': 'Filtrer…', 'awards.addAll': 'Tout ajouter', 'awards.clear': 'Vider', 'awards.allTracked': 'Tous les diplômes sont suivis.', 'awards.noneFollowed': 'Aucun pour l’instant — l’onglet Awards les montre tous.',
   'sec.awards': 'Diplômes', 'sec.cat': 'Interface CAT', 'sec.rotator': 'Rotator', 'sec.winkeyer': 'Manipulateur CW',
   'sec.antenna': 'Antenne motorisée', 'sec.antgenius': 'Antenna Genius', 'sec.tunergenius': 'Tuner Genius', 'sec.pgxl': 'Amplificateur', 'sec.flex': 'FlexRadio', 'sec.audio': 'Périphériques audio',
@@ -616,7 +616,7 @@ const fr: Dict = {
   'gen.showBeam': 'Afficher le cap de l\'antenne sur la carte principale',
   'gen.startEqEnd': 'Heure de début du QSO = heure de fin', 'gen.startEqEndHint': '(correspond à LoTW quand tu appelles un moment)',
   'gen.showQsoRate': 'Afficher le rythme QSO dans la barre du haut', 'gen.showQsoRateHint': '(QSO/heure, projeté sur les 10 / 60 dernières min)',
-  'gen.lookupOnBlur': 'Rechercher l\'indicatif seulement après avoir quitté le champ', 'gen.lookupOnBlurHint': '(pas pendant la saisie)', 'amp.hint': 'Configurez un ou plusieurs amplificateurs — chaque carte de panneau a une liste déroulante pour choisir lequel afficher.', 'amp.none': 'Aucun amplificateur configuré.', 'amp.namePh': 'Nom (p. ex. SPE gauche)', 'amp.remove': 'Supprimer cet amplificateur', 'amp.add': 'Ajouter un amplificateur', 'amp.password': 'Code distant', 'amp.passwordPh': 'vide en LAN', 'amp.passwordHint': "PowerGenius XL uniquement : nécessaire pour joindre l'ampli à distance — il annonce alors « AUTH » et refuse toute commande (« Unauthorized ») tant qu'on n'est pas identifié. Laisse vide sur le réseau local.", 'amp.freqOut': "Envoyer la fréquence à l'amplificateur (suivi de bande)", 'amp.freqPort': 'Port COM CAT/AUX', 'amp.freqBroadcast': 'Envoyer aussi sans être interrogé', 'amp.freqPollOnly': "Non — répondre seulement à l'amplificateur", 'amp.freqEvery': 'Oui, toutes les {ms} ms', 'amp.freqHint': "OpsLog se fait passer pour un transceiver sur ce second port, au format Kenwood : réglez l'amplificateur sur ce jeu de commandes (le jeu 5 sur un ACOM) à la même vitesse, et mettez-le en OPERATE — en veille il acquitte mais ne change pas de bande. Un amplificateur qui INTERROGE (ACOM) n'a besoin de rien de plus ; un amplificateur qui se contente d'ÉCOUTER la liaison CAT de la radio n'entendra rien tant que l'envoi spontané n'est pas activé.",
+  'gen.lookupOnBlur': 'Rechercher l\'indicatif seulement après avoir quitté le champ', 'gen.lookupOnBlurHint': '(pas pendant la saisie)', 'amp.hint': 'Configurez un ou plusieurs amplificateurs — chaque carte de panneau a une liste déroulante pour choisir lequel afficher.', 'amp.linked': 'Amplificateurs commandés ensemble', 'amp.linkedHint': "Coche ceux qui partagent un combiner : ON, OFF et OPERATE agiront sur tous à la fois, puisqu'un ampli resté en STANDBY n'alimenterait qu'une seule entrée. Un amplificateur non coché garde ses propres boutons. Chacun garde ses mesures.", 'amp.linkedSaveFirst': "Enregistre d'abord — un amplificateur a besoin d'un identifiant pour rejoindre un groupe.", 'amp.none': 'Aucun amplificateur configuré.', 'amp.namePh': 'Nom (p. ex. SPE gauche)', 'amp.remove': 'Supprimer cet amplificateur', 'amp.add': 'Ajouter un amplificateur', 'amp.password': 'Code distant', 'amp.passwordPh': 'vide en LAN', 'amp.passwordHint': "PowerGenius XL uniquement : nécessaire pour joindre l'ampli à distance — il annonce alors « AUTH » et refuse toute commande (« Unauthorized ») tant qu'on n'est pas identifié. Laisse vide sur le réseau local.", 'amp.freqOut': "Envoyer la fréquence à l'amplificateur (suivi de bande)", 'amp.freqPort': 'Port COM CAT/AUX', 'amp.freqBroadcast': 'Envoyer aussi sans être interrogé', 'amp.freqPollOnly': "Non — répondre seulement à l'amplificateur", 'amp.freqEvery': 'Oui, toutes les {ms} ms', 'amp.freqHint': "OpsLog se fait passer pour un transceiver sur ce second port, au format Kenwood : réglez l'amplificateur sur ce jeu de commandes (le jeu 5 sur un ACOM) à la même vitesse, et mettez-le en OPERATE — en veille il acquitte mais ne change pas de bande. Un amplificateur qui INTERROGE (ACOM) n'a besoin de rien de plus ; un amplificateur qui se contente d'ÉCOUTER la liaison CAT de la radio n'entendra rien tant que l'envoi spontané n'est pas activé.",
   'gen.groupDigital': 'Regrouper les modes digitaux en un seul (style DXCC)', 'gen.groupDigitalHint': '(badges de la matrice + cluster : FT8/FT4/RTTY… comptent comme un seul mode Digital ; décoché = chaque mode digital est un slot distinct)',
   // Chiffrement des mots de passe
   'gen.pwEnc': 'Chiffrement des mots de passe',
@@ -666,7 +666,7 @@ const fr: Dict = {
   'lk.provider': 'Fournisseur', 'lk.primary': 'Principal', 'lk.failsafe': 'Secours', 'lk.user': 'Utilisateur', 'lk.password': 'Mot de passe', 'lk.result': 'Résultat',
   'lk.testing': 'Test…', 'lk.test': 'Test', 'lk.testTitle': "Lance une recherche test sur l'indicatif du profil actif pour vérifier les identifiants",
   'lk.failsafeNote': 'Le Secours n\'est consulté que si le Principal ne trouve rien ou échoue. Décoche les deux en contest pour éviter tout accès réseau.',
-  'lk.display': 'Affichage', 'lk.showPics': 'Afficher les photos de profil QRZ',
+  'lk.display': 'Affichage', 'lk.qrzNickname': 'QRZ.com : utiliser le surnom comme nom', 'lk.qrzNicknameHint': "Enregistre le nom sous lequel l'opérateur se présente à l'air plutôt que ses prénom et nom déclarés. Retombe sur le nom complet si aucun surnom n'est publié. QRZ.com uniquement — HamQTH le fait déjà.", 'lk.showPics': 'Afficher les photos de profil QRZ',
   'lk.showPicsHint': 'Affiche la photo de QRZ.com à côté de la matrice « déjà contacté ». Peut ralentir les recherches en contest ; désactive si tu opères vite.',
   'lk.cache': 'Cache', 'lk.cacheHint': "Les recherches réussies sont mises en cache localement pour ne pas re-interroger le même indicatif. Le TTL contrôle la durée avant une nouvelle requête.",
   'lk.ttl': 'TTL (jours)', 'lk.clearing': 'Effacement…', 'lk.clearCache': 'Vider le cache',
@@ -720,7 +720,7 @@ const fr: Dict = {
   // Placeholders services externes + onglets HRDLOG / eQSL / LoTW / POTA
   'es.qrzApiPh': 'Clé API du logbook QRZ.com (XXXX-XXXX-XXXX-XXXX)', 'es.forceCallPh': 'p. ex. F4BPO — optionnel', 'es.callDefaultPh': "par défaut : l'indicatif du profil actif",
   'es.clubEmailPh': 'e-mail de ton compte Club Log', 'es.clubPwPh': 'mot de passe du compte Club Log',
-  'es.stationCall': 'Indicatif de station', 'es.uploadCode': "Code d'upload", 'es.hrdCodePh': 'Compte HRDLog → My Account → Upload code', 'es.hrdHint': "Trouve le code d'upload sur HRDLog.net dans « My Account ». Il autorise les envois pour cet indicatif.",
+  'es.stationCall': 'Indicatif de station', 'es.uploadCode': "Code d'upload", 'es.hrdCodePh': 'Compte HRDLog → My Account → Upload code', 'es.hrdOnAir': 'Annoncer ON AIR sur hrdlog.net', 'es.hrdOnAirHint': "Publie sur le site ta fréquence, ton mode et ta radio en direct tant que le poste est lisible, rafraîchi toutes les deux minutes. Nécessite l'indicatif et le code d'upload ci-dessus.", 'es.hrdHint': "Trouve le code d'upload sur HRDLog.net dans « My Account ». Il autorise les envois pour cet indicatif.",
   'es.usernameCall': 'Identifiant (indicatif)', 'es.eqslUserPh': 'ton identifiant eQSL.cc (indicatif)', 'es.eqslPwPh': 'mot de passe du compte eQSL.cc', 'es.qthNick': 'Surnom QTH', 'es.qthNickPh': 'optionnel — requis seulement si ton compte eQSL a plusieurs QTH', 'es.eqslHint': "Le surnom QTH indique à eQSL sous quel profil de lieu classer le QSO. Laisse vide si tu n'en as qu'un.",
   'es.lotwUser': 'Utilisateur LoTW', 'es.lotwUserPh': 'identifiant du site LoTW (pour télécharger les confirmations)', 'es.lotwPw': 'Mot de passe LoTW', 'es.lotwPwPh': 'mot de passe du site LoTW', 'es.tqslPath': 'Chemin TQSL', 'es.stationLoc': 'Station location', 'es.pickLoc': '— choisir une Station Location TQSL —', 'es.noLoc': 'Aucune Station Location TQSL trouvée', 'es.reloadLoc': 'Recharger les locations depuis TQSL', 'es.lotwForcePh': "p. ex. F4BPO/P — laisse vide pour utiliser l'indicatif du QSO", 'es.lotwForceHint': "Remplace STATION_CALLSIGN à la signature pour qu'un même certificat signe plusieurs indicatifs (F4BPO, F4BPO/P, TM2Q). Choisis la Station Location correspondante ci-dessus.", 'es.keyPw': 'Mot de passe de la clé', 'es.keyPwPh': 'seulement si la clé de ton certificat a un mot de passe', 'es.considerUnsent': 'Considérer comme non envoyé', 'es.flagN': 'Non (N)', 'es.flagR': 'Demandé (R)', 'es.lotwUnsentHint': "À la fermeture, chaque QSO dont le statut LoTW « envoyé » est l'un de ceux-ci est signé et envoyé dans un même lot TQSL — y compris les QSO importés depuis un ADIF. Les QSO envoyés passent à Y et ne sont pas renvoyés. Doit inclure ton statut « envoyé » par défaut défini dans Confirmations.", 'es.lotwAutoClose': "Envoi automatique à la fermeture de l'application", 'es.lotwWriteLog': 'Écrire le journal de diagnostic TQSL (-t)',
   'es.potaHint': "Met à jour tes QSO avec la référence du parc depuis ton carnet chasseur pota.app. Colle ton jeton de session : connecte-toi sur pota.app, ouvre les DevTools du navigateur → onglet Network, clique sur une requête api.pota.app, et copie toute la valeur de l'en-tête Authorization. Le jeton expire au bout d'un moment — recopie-le si la synchro échoue.", 'es.sessionToken': 'Jeton de session', 'es.saving': 'Enregistrement…', 'es.saveToken': 'Enregistrer le jeton', 'es.potaThen': "Puis lance la synchro depuis l'onglet Gestionnaire QSL → service POTA hunter log (tu peux y voir et corriger les QSO non appariés).",

frontend/src/lib/spotDisplay.ts

@@ -74,3 +74,16 @@ export function applySpotDisplay<T extends Entry>(s: T, o: SpotDisplayOptions):
   }
   return e;
 }
+
+// spotIsWorked answers "does this spot bring me nothing?", which is what the
+// "hide worked" filter is really asking.
+//
+// The extra markers are ORTHOGONAL to the entity status — a spot can be a worked
+// entity AND a new park, prefix, county or grid — so they win. Without that, a
+// new prefix in an entity worked years ago vanished the moment the filter went
+// on, which is the opposite of what an operator hunting prefixes wants.
+export function spotIsWorked(e: Entry): boolean {
+  if (!e) return false;
+  if (e.new_pota || e.new_county || e.new_pfx || e.new_grid) return false;
+  return !!e.worked_call || e.status === 'worked';
+}

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.24.9';
+export const APP_VERSION = '0.25.0';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -446,6 +446,8 @@ export function GetGridCacheStatus():Promise<main.GridCacheStatus>;
 
 export function GetIcomState():Promise<cat.IcomTXState>;
 
+export function GetLinkedAmps():Promise<Array<string>>;
+
 export function GetListsSettings():Promise<main.ListsSettings>;
 
 export function GetLiveOpenings():Promise<Array<bandopen.Opening>>;
@@ -506,6 +508,8 @@ export function GetSlotStats():Promise<qso.SlotStats>;
 
 export function GetSolarData():Promise<solar.Data>;
 
+export function GetSpotTTLMinutes():Promise<number>;
+
 export function GetStartupStatus():Promise<main.StartupStatus>;
 
 export function GetStationDevices():Promise<Array<main.StationDevice>>;
@@ -766,6 +770,8 @@ export function PopulateBuiltinReferences(arg1:string):Promise<number>;
 
 export function PublishLogNow():Promise<string>;
 
+export function QSLCopyTemplateToActiveProfile(arg1:number):Promise<number>;
+
 export function QSLDefaultTemplateID():Promise<number>;
 
 export function QSLDeleteTemplate(arg1:number):Promise<void>;
@@ -780,6 +786,8 @@ export function QSLGetEmailTemplates():Promise<main.QSLEmailTemplates>;
 
 export function QSLGetTemplate(arg1:number):Promise<string>;
 
+export function QSLListOtherProfileTemplates():Promise<Array<main.QSLForeignTemplate>>;
+
 export function QSLListTemplates():Promise<Array<main.QSLTemplateInfo>>;
 
 export function QSLPhotoDataURL(arg1:number,arg2:string):Promise<string>;
@@ -986,12 +994,16 @@ export function SetClublogMostWantedEnabled(arg1:boolean):Promise<void>;
 
 export function SetClusterAutoConnect(arg1:boolean):Promise<void>;
 
+export function SetCompactHeight(arg1:number):Promise<void>;
+
 export function SetCompactMode(arg1:boolean):Promise<void>;
 
 export function SetDVKLabel(arg1:number,arg2:string):Promise<void>;
 
 export function SetKenwoodKeySpeed(arg1:number):Promise<void>;
 
+export function SetLinkedAmps(arg1:Array<string>):Promise<void>;
+
 export function SetMotorFollow(arg1:boolean,arg2:number,arg3:string):Promise<void>;
 
 export function SetOpsLogQSLReceived(arg1:number,arg2:boolean):Promise<void>;
@@ -1000,6 +1012,8 @@ export function SetPassphrase(arg1:string):Promise<void>;
 
 export function SetScpEnabled(arg1:boolean):Promise<void>;
 
+export function SetSpotTTLMinutes(arg1:number):Promise<void>;
+
 export function SetTelemetryEnabled(arg1:boolean):Promise<void>;
 
 export function SetUIPref(arg1:string,arg2:string):Promise<void>;

frontend/wailsjs/go/main/App.js

@@ -834,6 +834,10 @@ export function GetIcomState() {
   return window['go']['main']['App']['GetIcomState']();
 }
 
+export function GetLinkedAmps() {
+  return window['go']['main']['App']['GetLinkedAmps']();
+}
+
 export function GetListsSettings() {
   return window['go']['main']['App']['GetListsSettings']();
 }
@@ -954,6 +958,10 @@ export function GetSolarData() {
   return window['go']['main']['App']['GetSolarData']();
 }
 
+export function GetSpotTTLMinutes() {
+  return window['go']['main']['App']['GetSpotTTLMinutes']();
+}
+
 export function GetStartupStatus() {
   return window['go']['main']['App']['GetStartupStatus']();
 }
@@ -1474,6 +1482,10 @@ export function PublishLogNow() {
   return window['go']['main']['App']['PublishLogNow']();
 }
 
+export function QSLCopyTemplateToActiveProfile(arg1) {
+  return window['go']['main']['App']['QSLCopyTemplateToActiveProfile'](arg1);
+}
+
 export function QSLDefaultTemplateID() {
   return window['go']['main']['App']['QSLDefaultTemplateID']();
 }
@@ -1502,6 +1514,10 @@ export function QSLGetTemplate(arg1) {
   return window['go']['main']['App']['QSLGetTemplate'](arg1);
 }
 
+export function QSLListOtherProfileTemplates() {
+  return window['go']['main']['App']['QSLListOtherProfileTemplates']();
+}
+
 export function QSLListTemplates() {
   return window['go']['main']['App']['QSLListTemplates']();
 }
@@ -1914,6 +1930,10 @@ export function SetClusterAutoConnect(arg1) {
   return window['go']['main']['App']['SetClusterAutoConnect'](arg1);
 }
 
+export function SetCompactHeight(arg1) {
+  return window['go']['main']['App']['SetCompactHeight'](arg1);
+}
+
 export function SetCompactMode(arg1) {
   return window['go']['main']['App']['SetCompactMode'](arg1);
 }
@@ -1926,6 +1946,10 @@ export function SetKenwoodKeySpeed(arg1) {
   return window['go']['main']['App']['SetKenwoodKeySpeed'](arg1);
 }
 
+export function SetLinkedAmps(arg1) {
+  return window['go']['main']['App']['SetLinkedAmps'](arg1);
+}
+
 export function SetMotorFollow(arg1, arg2, arg3) {
   return window['go']['main']['App']['SetMotorFollow'](arg1, arg2, arg3);
 }
@@ -1942,6 +1966,10 @@ export function SetScpEnabled(arg1) {
   return window['go']['main']['App']['SetScpEnabled'](arg1);
 }
 
+export function SetSpotTTLMinutes(arg1) {
+  return window['go']['main']['App']['SetSpotTTLMinutes'](arg1);
+}
+
 export function SetTelemetryEnabled(arg1) {
   return window['go']['main']['App']['SetTelemetryEnabled'](arg1);
 }

frontend/wailsjs/go/models.ts

@@ -1331,6 +1331,7 @@ export namespace extsvc {
 	    upload_flags: string[];
 	    write_log: boolean;
 	    auto_upload: boolean;
+	    on_air: boolean;
 	    upload_mode: string;
 	
 	    static createFrom(source: any = {}) {
@@ -1355,6 +1356,7 @@ export namespace extsvc {
 	        this.upload_flags = source["upload_flags"];
 	        this.write_log = source["write_log"];
 	        this.auto_upload = source["auto_upload"];
+	        this.on_air = source["on_air"];
 	        this.upload_mode = source["upload_mode"];
 	    }
 	}
@@ -2541,6 +2543,7 @@ export namespace main {
 	    primary: string;
 	    failsafe: string;
 	    download_images: boolean;
+	    qrz_prefer_nickname: boolean;
 	    cache_ttl_days: number;
 	
 	    static createFrom(source: any = {}) {
@@ -2556,6 +2559,7 @@ export namespace main {
 	        this.primary = source["primary"];
 	        this.failsafe = source["failsafe"];
 	        this.download_images = source["download_images"];
+	        this.qrz_prefer_nickname = source["qrz_prefer_nickname"];
 	        this.cache_ttl_days = source["cache_ttl_days"];
 	    }
 	}
@@ -2781,6 +2785,24 @@ export namespace main {
 	        this.data_b64 = source["data_b64"];
 	    }
 	}
+	export class QSLForeignTemplate {
+	    id: number;
+	    name: string;
+	    profile_id: number;
+	    profile_name: string;
+	
+	    static createFrom(source: any = {}) {
+	        return new QSLForeignTemplate(source);
+	    }
+	
+	    constructor(source: any = {}) {
+	        if ('string' === typeof source) source = JSON.parse(source);
+	        this.id = source["id"];
+	        this.name = source["name"];
+	        this.profile_id = source["profile_id"];
+	        this.profile_name = source["profile_name"];
+	    }
+	}
 	export class QSLPresetInfo {
 	    name: string;
 	    label: string;

hrdlogonair.go

@@ -0,0 +1,74 @@
+package main
+
+// HRDLog "ON AIR" — publishing the live frequency, mode and rig on hrdlog.net,
+// so the site shows "F4BPO is on air 14,074,000 FT8 IC-7300" while the station
+// is operating.
+//
+// The endpoint and its field names come from HRDLog's own library
+// (github.com/iw1qlh/HRDLOG-net-library), not from reading someone's traffic.
+
+import (
+	"context"
+	"strings"
+	"time"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/extsvc"
+)
+
+// onAirEvery is how often the status is refreshed. HRDLog drops a station from
+// the on-air list when it stops hearing from it, so this is a heartbeat, not a
+// change notification.
+const onAirEvery = 2 * time.Minute
+
+// hrdlogOnAirLoop publishes while the option is on and the rig is readable.
+func (a *App) hrdlogOnAirLoop() {
+	defer func() { _ = recover() }() // never crash the app from a status broadcast
+	t := time.NewTicker(onAirEvery)
+	defer t.Stop()
+	for range t.C {
+		a.publishHRDLogOnAir()
+	}
+}
+
+// publishHRDLogOnAir sends one update. Silent when switched off, unconfigured,
+// or when the rig has nothing to report — an announcement with no frequency
+// would say the operator is on air on 0 Hz.
+func (a *App) publishHRDLogOnAir() {
+	cfg := a.loadExternalServices().HRDLog
+	if !cfg.OnAir || strings.TrimSpace(cfg.Callsign) == "" || strings.TrimSpace(cfg.Code) == "" {
+		return
+	}
+	if a.cat == nil {
+		return
+	}
+	st := a.cat.State()
+	if !st.Connected || st.FreqHz <= 0 {
+		return
+	}
+	// The rig NAME as the operator knows it — that string is what the site
+	// displays. The active profile's MyRig first, since it is what every QSO is
+	// stamped with; the CAT backend's own model only when the profile has none.
+	radio := ""
+	if a.profiles != nil {
+		if pr, err := a.profiles.Active(a.ctx); err == nil {
+			radio = strings.TrimSpace(pr.MyRig)
+		}
+	}
+	if radio == "" {
+		radio = strings.TrimSpace(st.Rig)
+	}
+
+	ctx, cancel := context.WithTimeout(context.Background(), 20*time.Second)
+	defer cancel()
+	msg, err := extsvc.SendHRDLogOnAir(ctx, nil, cfg.Callsign, cfg.Code, st.FreqHz, st.Mode, radio)
+	if err != nil {
+		// Logged, never surfaced: this is a broadcast the operator did not ask
+		// for at this instant, and a toast every two minutes on a flaky link
+		// would be worse than the missing status.
+		applog.Printf("hrdlog on-air: %v (%s)", err, msg)
+		return
+	}
+	applog.Printf("hrdlog on-air: %s %.3f MHz %s (%s) — %s",
+		cfg.Callsign, float64(st.FreqHz)/1e6, st.Mode, radio, msg)
+}

internal/adif/county_test.go

@@ -0,0 +1,46 @@
+package adif
+
+import "testing"
+
+// ADIF defines CNTY as "STATE,COUNTY" — "GA,BARROW". OpsLog exported the bare
+// county, which a receiving logger cannot resolve: county names repeat across
+// states, and there is a Washington County in thirty of them.
+func TestADIFCountyFormat(t *testing.T) {
+	for _, tc := range []struct{ state, county, want string }{
+		{"GA", "BARROW", "GA,BARROW"},
+		{"ga", "Barrow", "GA,Barrow"},    // the state is a code, upper-cased; the name is not touched
+		{"", "BARROW", "BARROW"},         // no state known: a bare name beats nothing
+		{"GA", "", ""},                   // no county: nothing to write
+		{"GA", "GA,BARROW", "GA,BARROW"}, // already formatted — never double the prefix
+		{"  GA  ", " BARROW ", "GA,BARROW"},
+	} {
+		if got := adifCounty(tc.state, tc.county); got != tc.want {
+			t.Errorf("adifCounty(%q, %q) = %q, want %q", tc.state, tc.county, got, tc.want)
+		}
+	}
+}
+
+// And the mirror: a file from a logger that follows the standard must fill both
+// columns, while a file carrying the bare county still imports unchanged.
+func TestSplitADIFCounty(t *testing.T) {
+	for _, tc := range []struct{ in, county, state string }{
+		{"GA,BARROW", "BARROW", "GA"},
+		{"ga, Barrow", "Barrow", "GA"},
+		{"BARROW", "BARROW", ""}, // the old OpsLog form, and many other loggers
+		{"", "", ""},
+		{"  ", "", ""},
+	} {
+		c, s := splitADIFCounty(tc.in)
+		if c != tc.county || s != tc.state {
+			t.Errorf("splitADIFCounty(%q) = (%q, %q), want (%q, %q)", tc.in, c, s, tc.county, tc.state)
+		}
+	}
+}
+
+// Round trip: what OpsLog writes, OpsLog reads back to the same two values.
+func TestCountyRoundTrip(t *testing.T) {
+	c, s := splitADIFCounty(adifCounty("GA", "BARROW"))
+	if c != "BARROW" || s != "GA" {
+		t.Errorf("round trip gave (%q, %q), want (BARROW, GA)", c, s)
+	}
+}

internal/adif/export.go

@@ -221,7 +221,7 @@ func writeRecord(bw *bufio.Writer, q qso.QSO, includeApp bool, allow map[string]
 	w("VUCC_GRIDS", q.VUCCGrids)
 	w("COUNTRY", q.Country)
 	w("STATE", q.State)
-	w("CNTY", q.County)
+	w("CNTY", adifCounty(q.State, q.County))
 	wi("DXCC", q.DXCC)
 	w("CONT", q.Continent)
 	wi("CQZ", q.CQZ)
@@ -285,7 +285,7 @@ func writeRecord(bw *bufio.Writer, q qso.QSO, includeApp bool, allow map[string]
 	w("MY_GRIDSQUARE_EXT", q.MyGridExt)
 	w("MY_COUNTRY", q.MyCountry)
 	w("MY_STATE", q.MyState)
-	w("MY_CNTY", q.MyCounty)
+	w("MY_CNTY", adifCounty(q.MyState, q.MyCounty))
 	w("MY_IOTA", q.MyIOTA)
 	w("MY_SOTA_REF", q.MySOTARef)
 	w("MY_POTA_REF", q.MyPOTARef)
@@ -413,3 +413,25 @@ func modeForExport(mode, submode string) (string, string) {
 	}
 	return mode, ""
 }
+
+// adifCounty renders CNTY the way ADIF specifies: "STATE,COUNTY", e.g.
+// "GA,BARROW".
+//
+// OpsLog stores the two apart, and exported only the county — which a receiving
+// logger cannot resolve, since county names repeat across states (there is a
+// Washington County in thirty of them). The award engine here was never
+// affected because it reads the columns, not the ADIF; the damage was to
+// everyone we send a file to.
+//
+// The county alone is still written when no state is known: a bare name is
+// worth more than nothing, and inventing a prefix would be worse than either.
+// A county that ALREADY carries a comma is passed through — it has been
+// formatted once, and doubling the prefix would corrupt it.
+func adifCounty(state, county string) string {
+	c := strings.TrimSpace(county)
+	s := strings.TrimSpace(state)
+	if c == "" || s == "" || strings.Contains(c, ",") {
+		return c
+	}
+	return strings.ToUpper(s) + "," + c
+}

internal/adif/import.go

@@ -428,7 +428,12 @@ func recordToQSO(rec Record) (qso.QSO, bool) {
 	q.VUCCGrids = strings.ToUpper(rec["vucc_grids"])
 	q.Country = rec["country"]
 	q.State = strings.ToUpper(rec["state"])
-	q.County = rec["cnty"]
+	q.County, _ = splitADIFCounty(rec["cnty"])
+	if st := rec["state"]; strings.TrimSpace(st) == "" {
+		if _, fromCnty := splitADIFCounty(rec["cnty"]); fromCnty != "" {
+			q.State = fromCnty
+		}
+	}
 	if v, ok := parseInt(rec["dxcc"]); ok {
 		q.DXCC = &v
 	}
@@ -515,7 +520,12 @@ func recordToQSO(rec Record) (qso.QSO, bool) {
 	q.MyGridExt = strings.ToUpper(rec["my_gridsquare_ext"])
 	q.MyCountry = rec["my_country"]
 	q.MyState = strings.ToUpper(rec["my_state"])
-	q.MyCounty = rec["my_cnty"]
+	q.MyCounty, _ = splitADIFCounty(rec["my_cnty"])
+	if st := rec["my_state"]; strings.TrimSpace(st) == "" {
+		if _, fromCnty := splitADIFCounty(rec["my_cnty"]); fromCnty != "" {
+			q.MyState = fromCnty
+		}
+	}
 	q.MyIOTA = strings.ToUpper(rec["my_iota"])
 	q.MySOTARef = strings.ToUpper(rec["my_sota_ref"])
 	q.MyPOTARef = strings.ToUpper(rec["my_pota_ref"])
@@ -698,3 +708,20 @@ var promotableSubmodes = map[string]bool{
 func submodeSubsumesParent(submode string) bool {
 	return promotableSubmodes[submode]
 }
+
+// splitADIFCounty reads CNTY, which ADIF defines as "STATE,COUNTY".
+//
+// Returns the county on its own plus the state the field carried, so an import
+// from a logger that follows the standard fills BOTH columns here. Files that
+// write the bare county — as OpsLog itself used to — still import unchanged.
+//
+// The state from the field never overrides an explicit STATE tag: STATE is the
+// dedicated field and the more specific statement. It only fills a blank.
+func splitADIFCounty(cnty string) (county, state string) {
+	cnty = strings.TrimSpace(cnty)
+	i := strings.Index(cnty, ",")
+	if i < 0 {
+		return cnty, ""
+	}
+	return strings.TrimSpace(cnty[i+1:]), strings.ToUpper(strings.TrimSpace(cnty[:i]))
+}

internal/dxcc/dxcc.go

@@ -132,6 +132,18 @@ func (db *DB) Entities() []*Entity {
 func (db *DB) Lookup(callsign string) (Match, bool) {
 	db.mu.RLock()
 	defer db.mu.RUnlock()
+	// Maritime and aeronautical mobile belong to NO entity, and that is not a
+	// technicality — the station is at sea or in the air. RI1FJL/MM resolved to
+	// Franz Josef Land while the expedition was still on its way there, telling
+	// the operator they had worked an entity they had not.
+	//
+	// The previous choice was deliberate ("the log should still show the
+	// operator's country") and it is wrong for exactly that reason: a home
+	// country here is not extra information, it is a false claim about where the
+	// contact happened.
+	if IsMobileNoEntity(callsign) {
+		return Match{}, false
+	}
 	call := normalizeCallsign(callsign)
 	if call == "" {
 		return Match{}, false
@@ -364,3 +376,22 @@ func replaceAreaDigit(call string, d byte) string {
 	}
 	return call
 }
+
+// IsMobileNoEntity reports a callsign DXCC assigns to no entity: a TRAILING
+// /MM (maritime mobile) or /AM (aeronautical mobile).
+//
+// Trailing only. A LEADING "MM" is the Scotland prefix and "AM" is Spain, so
+// MM0ABC and AM5X are ordinary calls — treating those as entity-less would be a
+// far larger error than the one this fixes.
+func IsMobileNoEntity(callsign string) bool {
+	s := strings.ToUpper(strings.TrimSpace(callsign))
+	i := strings.LastIndex(s, "/")
+	if i < 0 {
+		return false
+	}
+	switch s[i+1:] {
+	case "MM", "AM":
+		return true
+	}
+	return false
+}

internal/dxcc/maritime_test.go

@@ -0,0 +1,39 @@
+package dxcc
+
+import "testing"
+
+// /MM and /AM belong to NO DXCC entity: the station is at sea or in the air.
+//
+// This is not a technicality. RI1FJL/MM resolved to Franz Josef Land while the
+// expedition was still sailing there, which told the operator they had worked
+// an entity they had not.
+func TestMobileNoEntity(t *testing.T) {
+	for _, tc := range []struct {
+		call string
+		want bool
+	}{
+		{"RI1FJL/MM", true},
+		{"YB1SCY/AM", true},
+		{"ri1fjl/mm", true},
+		{" RI1FJL/MM ", true},
+		// A LEADING MM is Scotland and AM is Spain. Treating those as
+		// entity-less would be a far larger error than the one this fixes.
+		{"MM0ABC", false},
+		{"AM5X", false},
+		{"MM/F4BPO", false},
+		{"AM/DL1ABC", false},
+		// Other suffixes keep their entity — a portable station is still ashore.
+		{"F4BPO/P", false},
+		{"F4BPO/M", false},
+		{"4U1UN/B", false},
+		{"F4BPO", false},
+		// Only the LAST element counts: RI1FJL/MM/P is still maritime, and a
+		// call whose /MM is not final is not.
+		{"RI1FJL/MM/P", false},
+		{"", false},
+	} {
+		if got := IsMobileNoEntity(tc.call); got != tc.want {
+			t.Errorf("IsMobileNoEntity(%q) = %v, want %v", tc.call, got, tc.want)
+		}
+	}
+}

internal/email/email.go

@@ -4,6 +4,7 @@ package email
 
 import (
 	"fmt"
+	"os"
 	"time"
 
 	"github.com/wneessen/go-mail"
@@ -85,7 +86,32 @@ func SendFiles(cfg Config, to, subject, body string, attachPaths []string) error
 		return fmt.Errorf("smtp client: %w", err)
 	}
 	if err := client.DialAndSend(m); err != nil {
-		return fmt.Errorf("send: %w", err)
+		return fmt.Errorf("send via %s:%d (%s, %s): %w",
+			cfg.Host, cfg.Port, cfg.Encryption, describeSize(attachPaths), err)
 	}
 	return nil
 }
+
+// describeSize reports what was attached, in bytes.
+//
+// "An existing connection was forcibly closed" during DATA is the same message
+// whether the server refused the size, hit a quota, or simply dropped the
+// socket — and the first of those is the only one the operator can act on
+// directly. Naming the size rules it in or out without a second attempt.
+func describeSize(paths []string) string {
+	var total int64
+	n := 0
+	for _, p := range paths {
+		if p == "" {
+			continue
+		}
+		if fi, err := os.Stat(p); err == nil {
+			total += fi.Size()
+			n++
+		}
+	}
+	if n == 0 {
+		return "no attachment"
+	}
+	return fmt.Sprintf("%d attachment(s), %d KB", n, (total+1023)/1024)
+}

internal/email/size_test.go

@@ -0,0 +1,34 @@
+package email
+
+import (
+	"os"
+	"path/filepath"
+	"testing"
+)
+
+// "An existing connection was forcibly closed" during DATA reads the same
+// whether the server refused the SIZE, hit a quota, or just dropped the socket
+// — and only the first is something the operator can act on. Naming the size in
+// the error rules it in or out without a second attempt.
+func TestDescribeSize(t *testing.T) {
+	dir := t.TempDir()
+	a := filepath.Join(dir, "card.jpg")
+	if err := os.WriteFile(a, make([]byte, 2048), 0o644); err != nil {
+		t.Fatal(err)
+	}
+
+	if got := describeSize(nil); got != "no attachment" {
+		t.Errorf("no attachment = %q", got)
+	}
+	if got := describeSize([]string{""}); got != "no attachment" {
+		t.Errorf("blank path = %q, want it ignored", got)
+	}
+	if got := describeSize([]string{a}); got != "1 attachment(s), 2 KB" {
+		t.Errorf("one file = %q", got)
+	}
+	// A path that does not exist must not be counted — the mail library skips it,
+	// so reporting it would describe a message that was never sent.
+	if got := describeSize([]string{a, filepath.Join(dir, "gone.jpg")}); got != "1 attachment(s), 2 KB" {
+		t.Errorf("missing file counted: %q", got)
+	}
+}

internal/extsvc/extsvc.go

@@ -81,6 +81,8 @@ type ServiceConfig struct {
 	UploadFlags          []string `json:"upload_flags"`           // LoTW: set of lotw_sent values that mean "ready to upload" — any of "N"/"R"
 	WriteLog             bool     `json:"write_log"`              // LoTW: pass -t to write a TQSL diagnostic log
 	AutoUpload           bool     `json:"auto_upload"`
+	// OnAir: HRDLog only — publish the live frequency, mode and rig on the site.
+	OnAir      bool       `json:"on_air"`
 	UploadMode UploadMode `json:"upload_mode"`
 }
 

internal/extsvc/hrdlog.go

@@ -6,6 +6,7 @@ import (
 	"io"
 	"net/http"
 	"net/url"
+	"strconv"
 	"strings"
 	"time"
 )
@@ -143,3 +144,59 @@ func TestHRDLog(ctx context.Context, client *http.Client, cfg ServiceConfig) (st
 	}
 	return fmt.Sprintf("Credentials accepted — %s", callsign), nil
 }
+
+// hrdlogOnAirURL is HRDLog's live-status endpoint — what puts "F4BPO is on air
+// 14,074,000 FM IC-7300" on the site's front page.
+//
+// Endpoint and field names taken from HRDLog's own library (github.com/iw1qlh/
+// HRDLOG-net-library, HrdProtocol.SendOnAirAsync), not from guesswork: it posts
+// Frequency in Hz, Mode, Radio, Callsign, Code and App.
+//
+// HTTPS where that library uses plain HTTP. The upload code is a credential and
+// has no business crossing the network in clear; the sibling NewEntry endpoint
+// on the same host already serves TLS.
+const hrdlogOnAirURL = "https://robot.hrdlog.net/OnAir.aspx"
+
+// SendHRDLogOnAir publishes the current frequency, mode and rig.
+//
+// Deliberately fire-and-forget in spirit: it is a status broadcast, so a
+// failure is logged and never surfaced as an error the operator must clear —
+// but the message is returned so the caller can log WHAT the site said rather
+// than only that something went wrong.
+func SendHRDLogOnAir(ctx context.Context, client *http.Client, callsign, code string, freqHz int64, mode, radio string) (string, error) {
+	callsign = strings.ToUpper(strings.TrimSpace(callsign))
+	code = strings.TrimSpace(code)
+	if callsign == "" || code == "" {
+		return "", fmt.Errorf("hrdlog: callsign and upload code required")
+	}
+	if freqHz <= 0 {
+		return "", fmt.Errorf("hrdlog: no frequency to announce")
+	}
+	form := url.Values{}
+	form.Set("Callsign", callsign)
+	form.Set("Code", code)
+	form.Set("App", hrdlogApp)
+	form.Set("Frequency", strconv.FormatInt(freqHz, 10))
+	form.Set("Mode", strings.TrimSpace(mode))
+	form.Set("Radio", strings.TrimSpace(radio))
+
+	req, err := http.NewRequestWithContext(ctx, http.MethodPost, hrdlogOnAirURL, strings.NewReader(form.Encode()))
+	if err != nil {
+		return "", fmt.Errorf("hrdlog on-air: build request: %w", err)
+	}
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	if client == nil {
+		client = &http.Client{Timeout: 15 * time.Second}
+	}
+	resp, err := client.Do(req)
+	if err != nil {
+		return "", fmt.Errorf("hrdlog on-air: %w", err)
+	}
+	defer resp.Body.Close()
+	body, _ := io.ReadAll(io.LimitReader(resp.Body, 32*1024))
+	msg := strings.TrimSpace(string(body))
+	if resp.StatusCode != http.StatusOK {
+		return msg, fmt.Errorf("hrdlog on-air: http %d", resp.StatusCode)
+	}
+	return msg, nil
+}

internal/lookup/qrz.go

@@ -21,6 +21,12 @@ type QRZ struct {
 
 	HTTP *http.Client
 
+	// PreferNickname takes QRZ's <nickname> over the composed first+last name
+	// when the operator has published one. It is the name they go BY on the air,
+	// which is what belongs in a log — HamQTH's <nick> is already used that way,
+	// and this brings QRZ into line for operators who want it.
+	PreferNickname bool
+
 	mu       sync.Mutex
 	session  string
 	loggedAt time.Time
@@ -117,7 +123,7 @@ func (q *QRZ) fetch(ctx context.Context, sessionKey, callsign string) (Result, e
 	}
 	r := Result{
 		Callsign:  strings.ToUpper(c.Call),
-		Name:      joinName(c.FName, c.Name),
+		Name:      qrzName(q.PreferNickname, c.Nickname, c.FName, c.Name),
 		QTH:       c.Addr2,
 		Address:   composeQRZAddress(c.Addr1, c.Addr2, c.Zip, c.Country),
 		State:     strings.ToUpper(c.State),
@@ -169,6 +175,7 @@ type qrzSession struct {
 type qrzCallsign struct {
 	Call      string `xml:"call"`
 	FName     string `xml:"fname"`
+	Nickname  string `xml:"nickname"` // the name the operator goes by on the air
 	Name      string `xml:"name"`
 	Addr1     string `xml:"addr1"`
 	Addr2     string `xml:"addr2"`
@@ -213,19 +220,6 @@ func composeQRZAddress(addr1, addr2, zip, country string) string {
 	return strings.Join(parts, ", ")
 }
 
-func joinName(first, last string) string {
-	first = strings.TrimSpace(first)
-	last = strings.TrimSpace(last)
-	switch {
-	case first != "" && last != "":
-		return first + " " + last
-	case first != "":
-		return first
-	default:
-		return last
-	}
-}
-
 func firstNonEmpty(s ...string) string {
 	for _, v := range s {
 		v = strings.TrimSpace(v)
@@ -235,3 +229,28 @@ func firstNonEmpty(s ...string) string {
 	}
 	return ""
 }
+
+// qrzName picks what goes in the log's Name field.
+//
+// The FIRST name only. A log greets an operator, it does not address an
+// envelope: "Robert" is what goes out on the air, and "Robert Smith" filled the
+// field with something no one would ever send. The surname stays available in
+// the record; it simply is not the name of the contact.
+//
+// The nickname is taken ahead of it when the operator asked for that AND QRZ
+// has one — a blank nickname must never blank the name, which is the whole
+// reason this is a fallback rather than a swap.
+//
+// The surname is the last resort: a record with no first name at all is better
+// answered with a surname than with nothing.
+func qrzName(preferNickname bool, nickname, fname, name string) string {
+	if preferNickname {
+		if n := strings.TrimSpace(nickname); n != "" {
+			return n
+		}
+	}
+	if f := strings.TrimSpace(fname); f != "" {
+		return f
+	}
+	return strings.TrimSpace(name)
+}

internal/lookup/qrzname_test.go

@@ -0,0 +1,33 @@
+package lookup
+
+import "testing"
+
+// What goes in a log's Name field is the FIRST name. A log greets an operator;
+// it does not address an envelope. "Robert Smith" filled the field with
+// something no one would ever send on the air.
+//
+// The nickname wins ahead of it when asked for — but a published nickname is
+// optional, so an empty one must fall through rather than blank the name. That
+// is the whole difference between a fallback and a swap.
+func TestQRZName(t *testing.T) {
+	for _, tc := range []struct {
+		name                  string
+		prefer                bool
+		nickname, fname, last string
+		want                  string
+	}{
+		{"first name only, never the surname", false, "Bob", "Robert", "Smith", "Robert"},
+		{"nickname when asked for", true, "Bob", "Robert", "Smith", "Bob"},
+		{"no nickname published falls back to the FIRST name", true, "", "Robert", "Smith", "Robert"},
+		{"a blank nickname is not a nickname", true, "   ", "Robert", "Smith", "Robert"},
+		{"option off ignores the nickname", false, "Bob", "Robert", "Smith", "Robert"},
+		{"surname is the last resort, not the default", true, "", "", "Smith", "Smith"},
+		{"nothing published at all", false, "", "", "", ""},
+		{"nickname alone", true, "Bob", "", "", "Bob"},
+	} {
+		if got := qrzName(tc.prefer, tc.nickname, tc.fname, tc.last); got != tc.want {
+			t.Errorf("%s: qrzName(%v, %q, %q, %q) = %q, want %q",
+				tc.name, tc.prefer, tc.nickname, tc.fname, tc.last, got, tc.want)
+		}
+	}
+}

internal/rigctld/rigctld.go

@@ -32,6 +32,7 @@ package rigctld
 import (
 	"bufio"
 	"fmt"
+	"hamlog/internal/cat"
 	"net"
 	"strconv"
 	"strings"
@@ -244,7 +245,18 @@ func (s *Server) serve(c net.Conn) {
 			s.log("rigctld: client %s disconnected", c.RemoteAddr())
 			return
 		}
-		resp, quit := s.handle(strings.TrimSpace(line))
+		req := strings.TrimSpace(line)
+		resp, quit := s.handle(req)
+		// The whole exchange, when tracing is on.
+		//
+		// Only PTT transitions were ever recorded, so when JTDX aborted a
+		// transmission mid-frame the log showed the abort and not the command
+		// that preceded it — the one thing needed to tell whether OpsLog answered
+		// something the client could not accept. Behind the same switch as the CAT
+		// wire trace: this is one line per poll and would drown an ordinary log.
+		if req != "" && cat.CIVTraceEnabled() {
+			s.log("rigctld: %s → %q ⇒ %q", c.RemoteAddr(), req, strings.TrimRight(resp, "\r\n"))
+		}
 		if resp != "" {
 			if _, err := w.WriteString(resp); err != nil {
 				return
@@ -409,6 +421,17 @@ func (s *Server) handle(line string) (resp string, quit bool) {
 			return rprt(0), false
 		}
 		s.splitWanted.Store(false)
+		// Already simplex? Then there is nothing to do and the request is
+		// satisfied. Reporting a failure here is what broke JTDX in "Fake It":
+		// Fake It uses no split, JTDX still sends "S 0" to be sure, and a backend
+		// that cannot SET split answered an error to a request that was already
+		// true. JTDX read that as rig control failing and abandoned the
+		// transmission a second into the frame.
+		//
+		// A refusal is only honest when something actually needed doing.
+		if on, _ := s.rig.Split(); !on {
+			return rprt(0), false
+		}
 		if err := s.rig.SetSplit(false, 0); err != nil {
 			s.log("rigctld: split off failed: %v", err)
 			return rprt(-9), false
@@ -438,6 +461,34 @@ func (s *Server) handle(line string) (resp string, quit bool) {
 		s.log("rigctld: split ON, TX %.0f Hz", hz)
 		return rprt(0), false
 
+	case "X", "\\set_split_mode":
+		// "X <mode> <passband>" — the mode of the TRANSMIT VFO.
+		//
+		// Accepted rather than refused. WSJT-X and JTDX send it as part of their
+		// normal setup even in "Fake It", where there is no split and therefore no
+		// second VFO to give a mode to; answering "not implemented" made JTDX give
+		// up on rig control mid-transmission.
+		//
+		// The mode is applied when there IS a split — the transmit VFO is a real
+		// one then. Without split the request has no target and succeeding is the
+		// honest answer: the transmit VFO already has that mode, because it is the
+		// same VFO.
+		if len(args) < 1 {
+			return rprt(-1), false
+		}
+		if on, _ := s.rig.Split(); !on {
+			return rprt(0), false
+		}
+		if err := s.rig.SetMode(args[0]); err != nil {
+			s.log("rigctld: split mode %q failed: %v", args[0], err)
+			return rprt(-9), false
+		}
+		return rprt(0), false
+	case "x", "\\get_split_mode":
+		// Mirrors X: the transmit VFO's mode and passband. Without split that is
+		// simply the current mode.
+		return s.rig.Mode() + "\n2400\n", false
+
 	default:
 		// A frame ending in ';' is not a rigctl command at all — it is raw rig
 		// dialect (Kenwood/Elecraft/Yaesu), which means the client is configured

internal/rigctld/split_test.go

@@ -50,3 +50,55 @@ func TestSetSplitRefusalIsReported(t *testing.T) {
 		t.Errorf("a rig that cannot split answered %q — the client will transmit on the wrong frequency", got)
 	}
 }
+
+// "Fake It" uses NO split, and JTDX still sends "S 0" to make sure. A backend
+// that cannot SET split used to answer an error to that — a refusal of a
+// request that was already satisfied — and JTDX read it as rig control failing
+// and abandoned the transmission a second into a 13.8-second frame.
+//
+// Reported against a Yaesu whose backend cannot arm split from software.
+func TestSplitOffOnASimplexRigSucceeds(t *testing.T) {
+	rig := &fakeRig{freq: 14074000, mode: "FT8", noSplit: true}
+	s := New(0, rig, func(string, ...any) {})
+
+	if got, _ := s.handle("S 0 VFOA"); !strings.HasPrefix(got, "RPRT 0") {
+		t.Errorf("split off on a simplex rig answered %q — nothing needed doing", got)
+	}
+	// And it must not have bothered the rig at all.
+	if len(rig.splitCalls) != 0 {
+		t.Errorf("rig was asked to clear a split it did not have: %v", rig.splitCalls)
+	}
+
+	// Arming, however, must still fail loudly: there the request is real and
+	// unmet, and a client that believes it is transmitting up the band while the
+	// radio sits on the DX's frequency is the bug this refusal exists to prevent.
+	if got, _ := s.handle("S 1 VFOB"); !strings.HasPrefix(got, "RPRT 0") {
+		t.Fatalf("arming is deferred to set_split_freq: %q", got)
+	}
+	if got, _ := s.handle("I 14075300.000000"); strings.HasPrefix(got, "RPRT 0") {
+		t.Error("arming split on a backend that cannot must report a failure")
+	}
+}
+
+// X (set_split_mode) is sent by WSJT-X and JTDX during ordinary setup, Fake It
+// included — where there is no second VFO to give a mode to. Answering "not
+// implemented" made JTDX give up on rig control mid-transmission.
+func TestSplitModeIsAccepted(t *testing.T) {
+	rig := &fakeRig{freq: 14074000, mode: "FT8"}
+	s := New(0, rig, func(string, ...any) {})
+
+	// No split: nothing to target, and succeeding is honest — the transmit VFO
+	// already has that mode because it is the same VFO.
+	if got, _ := s.handle("X PKTUSB -1"); !strings.HasPrefix(got, "RPRT 0") {
+		t.Errorf("set_split_mode answered %q", got)
+	}
+	if rig.mode != "FT8" {
+		t.Errorf("the mode was changed with no split in force: %q", rig.mode)
+	}
+
+	// Reading it back must answer a mode and a passband, never an error.
+	got, _ := s.handle("x")
+	if !strings.Contains(got, "FT8") {
+		t.Errorf("get_split_mode = %q, want the current mode", got)
+	}
+}

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.24.9"
+	appVersion = "0.25.0"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.