rouggy 626edca8ba feat(cat): Elecraft K3/K4 DATA A — send MD6 + DT0 on data mode (from the stale branch) ...

Integrates the fix/jtdx-kenwood-tx work onto main: the Kenwood/Elecraft backend's
"data" data-mode path now sends MD6 then DT0 so a K3/K4 lands in DATA A — the
audio sub-mode FT8 uses. MD6 alone could leave the rig in an FSK/PSK sub-mode
where it keyed but the rear sound-card audio never modulated ("transmits but
nothing comes out"). The data-mode option is relabelled "DATA A — MD6+DT0
(Elecraft K3/K4)". A shared Kenwood/Elecraft backend is kept (the K3 emulates the
Kenwood dialect); the Elecraft specifics live behind the data-mode seam rather
than a 7000-line duplicate backend.

2026-08-07 16:37:55 +02:00

..

civ

fix: CI-V frames read at the wrong offset decoded as plausible frequencies

2026-07-30 14:05:30 +02:00

cat.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

flex_rxslice_test.go

feat: Flex stays on the RX slice in split

2026-07-30 23:03:29 +02:00

flex_split_test.go

fix: Bug showing split for flex while in different mode on same band

2026-07-10 15:59:32 +02:00

flex.go

fix: PGXL meters/auth/fan, TCI spots+click, PTT-over-CAT, CW <LOGQSO>

2026-08-04 15:55:10 +02:00

flexdiscover.go

feat: added versionning & About window

2026-06-16 19:36:56 +02:00

icom_silence_test.go

fix: Icom over LAN froze on the last frequency after WSJT-X released the rig

2026-07-28 22:24:32 +02:00

icomaudio.go

feat: added full support in USB (local) & ethernet (local or remote) of audio for Icom

2026-07-09 11:30:06 +02:00

icomnet.go

feat: follow the SUB VFO over OmniRig; distance column in the QSO grids

2026-07-26 23:36:56 +02:00

icomserial.go

chore: release v0.22.9

2026-08-02 06:40:10 +02:00

kenwood_cw.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

kenwood_loopback_test.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

kenwood_test.go

feat(cat): per-rig Kenwood/Elecraft data-mode choice (USB / MD6 / keep)

2026-08-04 18:14:26 +02:00

kenwood.go

feat(cat): Elecraft K3/K4 DATA A — send MD6 + DT0 on data mode (from the stale branch)

2026-08-07 16:37:55 +02:00

log.go

fix: Kenwood split read from FR/FT when the status frame omits it

2026-07-30 16:50:06 +02:00

omnirig_activate32.go

chore: release v0.21.3

2026-07-26 16:57:19 +02:00

omnirig_elevation_test.go

chore: release v0.21.3

2026-07-26 16:57:19 +02:00

omnirig_vfo_test.go

fix: a cluster spot dragged the rig from SUB back to MAIN

2026-07-29 16:07:20 +02:00

omnirig.go

fix: a cluster spot dragged the rig from SUB back to MAIN

2026-07-29 16:07:20 +02:00

tci.go

fix: PGXL meters/auth/fan, TCI spots+click, PTT-over-CAT, CW <LOGQSO>

2026-08-04 15:55:10 +02:00

xiegu_test.go

fix: CI-V frames read at the wrong offset decoded as plausible frequencies

2026-07-30 14:05:30 +02:00

xiegu.go

fix: serial CAT keyed the radio on connect; Xiegu can key on RTS/DTR

2026-07-31 22:16:03 +02:00

yaesu_cw_test.go

fix: the FTDX10 refuses KY; — stop waiting on a status it will never send

2026-07-29 13:15:36 +02:00

yaesu_cw.go

docs: FTDX10 confirmed — no CAT keying, the serial DTR keyer is the way

2026-07-29 13:27:04 +02:00

yaesu_panel.go

fix: Yaesu mode commands always addressed the main receiver

2026-07-30 10:10:43 +02:00

yaesu_split_test.go

fix: the Yaesu power meter is not linear — calibrate it on three points

2026-07-29 14:11:25 +02:00

yaesu_test.go

fix: Yaesu mode commands always addressed the main receiver

2026-07-30 10:10:43 +02:00

yaesu.go

feat(cat): make the DTR/RTS lowering a setting

2026-08-01 19:25:04 +02:00