rouggy
85872f8379
Wired into the multi-amplifier support that already carries the SPE, the
ACOM and the PowerGenius: a fourth brand rather than a fourth mechanism.
The linking, the fan-out and the poll all work on it unchanged.
Three things the KPA does differently, and each is handled where it shows
rather than explained in a hint:
- A KPA500 has no network side at all. Choosing it puts the entry on
serial, and a configuration still asking for TCP is refused with a
line saying so instead of retrying an address that cannot answer.
- The amplifier answers ^ON while its main supplies are OFF — a sleeping
microcontroller stays awake for exactly that — so power-on stays
available over the network, unlike the SPE and ACOM which need their
serial control lines.
- Going to OPERATE clears the current fault, everything except
temperature. The widget says so under the fault, because the button
that fixes it is the one already on screen.
Defaults that leave a working configuration when the model is changed:
38400 baud, TCP port 1500, and a full-scale power mark of 500 or 1500 W
by model — a KPA500 read against a 1500 W scale looks idle at full
output.