Field report from a tower: on a RAK/RAU in Rot1Prog, every commanded heading
made the antenna want to turn nearly a full circle ANTICLOCKWISE — 0°, 90°, any
of them — while the heading readout, the stop button and everything else worked.
BuildSet framed the four-digit Rot2Prog azimuth for both dialects. A Rot1Prog
reads three: its replies are three digits in a five-byte frame, and its command
field matches. So 90° went out as "0450" and was read as 045 — 45 − 360 = −315°.
Every target landed 360° low, which is why it was always anticlockwise and
always nearly a full turn. The operator's own guess, that OpsLog was in 720°
mode, was the right instinct in the wrong place: the fault is a decimal shift,
not a range.
The round-trip test added here is the one that would have caught it without a
tower — every degree of the circle through the command builder and back through
the reply parser, which must return the degree that went in. The frame tests
pinned the Rot2Prog form against the reference and said nothing about the other
dialect.
Two more from the same report. A rotator test that only READS the heading — SPID,
ARCO, DCU-1 — said "Packet sent, the antenna should swing to north, check
PstRotator's UDP listener", naming a program not in the path for a move never
commanded; it now says the controller answered and nothing was moved. And the
compass polled every three seconds, so a turning antenna moved the needle in
steps of about thirteen degrees; the heading now has its own 700 ms tick while
the relay boards and the antenna controller stay at three seconds.
rouggy
f405e71d7d