Two faults, reported from a real SunSDR.
DRIVE AND TUNE DRIVE DID NOTHING, and neither did MUTE. Those commands
carry the transceiver index — 'drive:0,15;', not 'drive:15;' — and sent
without it the radio ignores them silently: no error, no answer, the power
unchanged. The rule was in the radio's own reports all along, which is
where it should have been read from: it announces 'drive:0,85' and
'mute:0,false' at connect, while 'mic_level:100' and 'volume:-12' come
with no index at all. Sending the shape the radio speaks in is the whole
rule, and it is now written down next to the two exceptions.
AGC LOOKED STUCK ON SLOW. The panel showed only what the radio reported
back, on the principle that the radio is the truth — but ExpertSDR3 does
not echo every setting it accepts, so a working button sat unlit. Changes
are shown at once and held for a moment now; whatever the radio announces
afterwards still wins, so a clamped or refused setting stays honest
without every working one looking broken.
Also from the same report, and fair: the consoles did not resemble each
other. The Icom panel's RIT control is now a shared component both use —
chip, signed offset, ± keys, wheel, and TYPING a value straight in, which
is the thing a row of ±10/±100 buttons cannot do. Ctrl+←/→ shifts the RIT
here as it does there. And LONG is gone from the AGC row: the protocol
takes it, but it is a hang time nobody reaches for between overs.
rouggy
fc79be7c05