chore: release v0.19.2

app.go

@@ -8670,6 +8670,30 @@ func (a *App) FlexSetAPFLevel(l int) error {
 	}
 	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetAPFLevel(l) })
 }
+func (a *App) FlexSetWNB(on bool) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetWNB(on) })
+}
+func (a *App) FlexSetWNBLevel(l int) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetWNBLevel(l) })
+}
+func (a *App) FlexSetTXFilter(low, high int) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetTXFilter(low, high) })
+}
+func (a *App) FlexSetMicProfile(name string) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetMicProfile(name) })
+}
 func (a *App) FlexSetCWSpeed(wpm int) error {
 	if a.cat == nil {
 		return fmt.Errorf("cat not initialized")

frontend/src/components/FlexPanel.tsx

@@ -7,6 +7,7 @@ import {
   GetPGXLStatus, PGXLSetFanMode,
   FlexSetAGCMode, FlexSetAGCThreshold, FlexSetAudioLevel, FlexSetMute, FlexSetRXAntenna, FlexSetTXAntenna, FlexSetSplit, FlexSetActiveSlice, FlexSetTXSlice,
   FlexSetNB, FlexSetNBLevel, FlexSetNR, FlexSetNRLevel, FlexSetANF, FlexSetANFLevel,
+  FlexSetWNB, FlexSetWNBLevel, FlexSetTXFilter, FlexSetMicProfile,
   FlexSetAPF, FlexSetAPFLevel, FlexSetCWSpeed, FlexSetCWPitch, FlexSetCWBreakInDelay,
   FlexSetCWSidetone, FlexSetSidetoneLevel, FlexSetCWFilter, FlexSetFilter,
 } from '../../wailsjs/go/main/App';
@@ -25,6 +26,8 @@ type FlexState = {
   rx_ant?: string; tx_ant?: string; ant_list?: string[]; tx_ant_list?: string[];
   split: boolean; rx_freq_hz?: number; tx_freq_hz?: number;
   nb: boolean; nb_level: number; nr: boolean; nr_level: number; anf: boolean; anf_level: number;
+  wnb: boolean; wnb_level: number;
+  tx_filter_low: number; tx_filter_high: number; mic_profile?: string; mic_profiles?: string[];
   mode?: string;
   cw_speed: number; cw_pitch: number; cw_break_in_delay: number; cw_sidetone: boolean; cw_mon_level: number;
   apf: boolean; apf_level: number; filter_lo: number; filter_hi: number;
@@ -42,6 +45,7 @@ const ZERO: FlexState = {
   mon: false, mon_level: 0, mic_level: 0, atu_memories: false,
   rx_avail: false, agc_threshold: 0, audio_level: 0, mute: false, split: false,
   nb: false, nb_level: 0, nr: false, nr_level: 0, anf: false, anf_level: 0,
+  wnb: false, wnb_level: 0, tx_filter_low: 0, tx_filter_high: 0,
   cw_speed: 25, cw_pitch: 600, cw_break_in_delay: 30, cw_sidetone: true, cw_mon_level: 0,
   apf: false, apf_level: 0, filter_lo: 0, filter_hi: 0,
   amp_available: false, amp_operate: false,
@@ -143,27 +147,28 @@ function LevelRow({ label, on, onToggle, value, onLevel, disabled, accent, slide
 // `display` overrides the numeric readout; `segColor` colours segments by their
 // 0..1 position (zones); the top ~18% light red by default (overload/peak).
 const METER_SEGMENTS = 26;
-function MeterBar({ label, value, unit, lo, hi, accent = '#16a34a', extra, display, segColor, onClick, title }: {
+function MeterBar({ label, value, unit, lo, hi, accent = '#16a34a', extra, display, segColor, onClick, title, compact }: {
   label: string; value: number; unit?: string; lo: number; hi: number; accent?: string; extra?: string; display?: string;
-  segColor?: (frac: number) => string; onClick?: () => void; title?: string;
+  segColor?: (frac: number) => string; onClick?: () => void; title?: string; compact?: boolean;
 }) {
   const span = hi - lo;
   const pct = span > 0 ? Math.max(0, Math.min(100, ((value - lo) / span) * 100)) : 0;
   const lit = Math.round((pct / 100) * METER_SEGMENTS);
   return (
     <div onClick={onClick} title={title}
-      className={cn('rounded-lg border border-border/70 px-2.5 py-2 bg-gradient-to-b from-card to-muted/40 shadow-sm min-w-0',
+      className={cn('rounded-lg border border-border/70 bg-gradient-to-b from-card to-muted/40 shadow-sm min-w-0',
+        compact ? 'px-2 py-1' : 'px-2.5 py-2',
         onClick && 'cursor-pointer hover:border-primary/60 hover:from-muted/40')}>
-      <div className="flex items-baseline justify-between gap-1 mb-1.5">
+      <div className={cn('flex items-baseline justify-between gap-1', compact ? 'mb-1' : 'mb-1.5')}>
         <span className="text-[10px] font-bold uppercase tracking-wider text-muted-foreground truncate">{label}</span>
-        <span className="text-sm font-mono font-bold tabular-nums whitespace-nowrap text-foreground/90">
+        <span className={cn('font-mono font-bold tabular-nums whitespace-nowrap text-foreground/90', compact ? 'text-xs' : 'text-sm')}>
           {display !== undefined ? display : (
             <>{Math.abs(value) >= 100 ? value.toFixed(0) : value.toFixed(1)}<span className="text-muted-foreground text-[10px] ml-0.5">{unit}</span></>
           )}
         </span>
       </div>
       {/* LED bar — recessed track + gradient segments for a cleaner instrument look. */}
-      <div className="flex gap-[2px] h-3 items-stretch rounded-[3px] bg-black/10 p-[2px]">
+      <div className={cn('flex gap-[2px] items-stretch rounded-[3px] bg-black/10 p-[2px]', compact ? 'h-2' : 'h-3')}>
         {Array.from({ length: METER_SEGMENTS }).map((_, i) => {
           const on = i < lit;
           const frac = i / METER_SEGMENTS;
@@ -176,7 +181,7 @@ function MeterBar({ label, value, unit, lo, hi, accent = '#16a34a', extra, displ
           );
         })}
       </div>
-      {extra && <div className="text-[10px] text-muted-foreground/70 mt-1 text-right font-mono">{extra}</div>}
+      {extra && !compact && <div className="text-[10px] text-muted-foreground/70 mt-1 text-right font-mono">{extra}</div>}
     </div>
   );
 }
@@ -262,6 +267,13 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
     ? SSB_BW.reduce((best, bw) => (Math.abs(bw - curBW) < Math.abs(best - curBW) ? bw : best), SSB_BW[0])
     : -1;
 
+  // Compact header readouts for PA voltage + temperature (numbers, not bars) — the
+  // user wanted these in the header to save vertical space in the Meters card.
+  const hdrMeters = st.meters || [];
+  const hdrFind = (name: string) => hdrMeters.find((m) => (m.name || '').toUpperCase().includes(name) && !(m.src || '').toUpperCase().includes('AMP'));
+  const voltM = hdrFind('13.8') || hdrFind('VOLT');
+  const patempM = hdrFind('PATEMP') || hdrFind('PA TEMP');
+
   return (
     <div className="h-full min-h-0 overflow-auto bg-background">
       <div className="max-w-5xl mx-auto p-3 space-y-3">
@@ -274,6 +286,23 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
             <span className="text-[11px] text-slate-400">{t('flxp.smartsdrRemote')}</span>
           </div>
           <div className="flex-1" />
+          {/* Compact PA voltage + temperature readouts (numbers) to save space. */}
+          {!off && (voltM || patempM) && (
+            <div className="flex items-center gap-4 mr-1 font-mono tabular-nums">
+              {voltM && (
+                <span className="flex flex-col items-end leading-none">
+                  <span className="text-[9px] uppercase tracking-wider text-slate-400 font-sans">{t('flxp.voltage')}</span>
+                  <span className="text-sm font-bold">{voltM.value.toFixed(1)}<span className="text-[9px] text-slate-400 ml-0.5">V</span></span>
+                </span>
+              )}
+              {patempM && (
+                <span className="flex flex-col items-end leading-none">
+                  <span className="text-[9px] uppercase tracking-wider text-slate-400 font-sans">{t('flxp.paTemp')}</span>
+                  <span className={cn('text-sm font-bold', patempM.value >= 70 ? 'text-red-400' : patempM.value >= 55 ? 'text-amber-400' : 'text-slate-100')}>{patempM.value.toFixed(0)}<span className="text-[9px] text-slate-400 ml-0.5">°C</span></span>
+                </span>
+              )}
+            </div>
+          )}
           <span className={cn('inline-flex items-center gap-1.5 px-3 py-1.5 rounded-lg text-sm font-extrabold tracking-wider',
             !st.available ? 'bg-muted text-muted-foreground'
               : st.transmitting ? 'bg-danger text-danger-foreground shadow-[0_0_16px] shadow-danger/60' : 'bg-success text-success-foreground')}>
@@ -315,6 +344,58 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
           </div>
         )}
 
+        {/* Live meters (UDP VITA-49 stream) — placed right under the slices. */}
+        <Card icon={Gauge} title={t('flxp.meters')}>
+          {(() => {
+            const meters = st.meters || [];
+            if (off || meters.length === 0) {
+              return <p className="text-[11px] text-muted-foreground text-center py-2">{t('flxp.noMeters')}</p>;
+            }
+            const isDbm = (m?: Meter) => !!m && /dbm/i.test(m.unit || '');
+            const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
+            // Radio meters (exclude the amplifier's, which we show separately).
+            const radio = (name: string) => meters.find((m) =>
+              (m.name || '').toUpperCase().includes(name) && !(m.src || '').toUpperCase().includes('AMP'));
+            const sig = radio('LEVEL') || radio('SIGNAL');
+            const fwd = radio('FWDPWR');
+            const swr = radio('SWR');
+            // Mic input level + speech-compression (voltage & PA temp live in the
+            // header now). All already in the meter stream.
+            const mic = meters.find((m) => /MIC/i.test(m.name || '') && !(m.src || '').toUpperCase().includes('AMP'));
+            const comp = radio('COMPPEAK') || radio('COMP');
+            // S-meter: dBm → S-units (S9 = -73 dBm on HF, 6 dB per unit).
+            const sUnit = (dbm: number) => {
+              const sv = (dbm + 127) / 6; // S0 = -127 dBm
+              if (sv >= 9) {
+                const over = Math.max(0, Math.round(dbm + 73)); // dB over S9
+                return { display: over > 0 ? `S9+${over}` : 'S9', bar: sv, s: 9, over };
+              }
+              return { display: `S${Math.max(0, Math.round(sv))}`, bar: Math.max(0, sv), s: Math.max(0, sv), over: 0 };
+            };
+            const cur = [
+              sig && (() => { const dbm = peakHold('s', sig.value); const s = sUnit(dbm); return (
+                <MeterBar key="s" label="S-METER" value={s.bar} lo={0} hi={19} accent="#16a34a" display={s.display} extra={`${dbm.toFixed(1)} dBm`}
+                  title={onReportRST ? t('rst.clickToFill') : undefined}
+                  onClick={onReportRST ? () => onReportRST(sMeterRST(s.s, s.over, st.mode)) : undefined}
+                  segColor={(fr) => { const sval = fr * 19; return sval < 9 ? '#16a34a' : sval < 12.33 ? '#f59e0b' : '#dc2626'; }} />
+              ); })(),
+              fwd && (() => { const w = peakHold('p', isDbm(fwd) ? dbmToW(fwd.value) : fwd.value); return (
+                <MeterBar key="p" label="PWR" unit="W" lo={0} hi={120} accent="#dc2626"
+                  value={w} extra={isDbm(fwd) ? `${fwd.value.toFixed(1)} dBm` : undefined} />
+              ); })(),
+              swr && <MeterBar key="w" label="SWR" value={peakHold('w', swr.value)} unit="" lo={1} hi={3} accent="#d97706" />,
+              // Mic input level: fixed -40..+10 dB scale, RED from 0 dB up (overdrive).
+              mic && <MeterBar key="mic" label="MIC" value={peakHold('mic', mic.value)} unit={mic.unit || 'dB'} lo={-40} hi={10} accent="#16a34a"
+                segColor={(fr) => (fr >= 0.8 ? '#dc2626' : fr >= 0.7 ? '#f59e0b' : '#16a34a')} />,
+              // Speech compression (dB of gain reduction).
+              comp && <MeterBar key="comp" label="COMP" value={peakHold('comp', comp.value)} unit={comp.unit || 'dB'} lo={0} hi={(comp.hi && comp.hi > 0) ? comp.hi : 25} accent="#0891b2" />,
+            ].filter(Boolean);
+            return (
+              <div className="grid grid-cols-2 sm:grid-cols-3 gap-2">{cur}</div>
+            );
+          })()}
+        </Card>
+
         {off && (
           <div className="text-center text-sm text-muted-foreground py-6">
             {t('flxp.waiting')}
@@ -391,6 +472,39 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                 <Slider value={st.mic_level} disabled={off} accent="#2563eb" onChange={(v) => change('mic_level', v, () => FlexSetMic(v))} />
                 <span className="w-8 text-right text-xs font-mono tabular-nums text-muted-foreground">{st.mic_level}</span>
               </div>
+              {/* TX audio bandwidth — low/high cut (Hz). Typed locally, committed on
+                  blur/Enter so we don't spam a command per keystroke; the hold guard
+                  keeps the poll from clobbering the field mid-edit. */}
+              <div className="flex items-center gap-2">
+                <span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">{t('flxp.txFilter')}</span>
+                {(() => {
+                  const editTX = (patch: Partial<FlexState>) => { hold.current['tx_filter_low'] = Date.now() + 8000; hold.current['tx_filter_high'] = Date.now() + 8000; setSt((p) => ({ ...p, ...patch })); };
+                  const commitTX = () => { hold.current['tx_filter_low'] = Date.now() + 900; hold.current['tx_filter_high'] = Date.now() + 900; FlexSetTXFilter(st.tx_filter_low || 0, st.tx_filter_high || 0).catch(() => {}); };
+                  const inp = 'w-[70px] h-8 rounded-md border border-input bg-background px-2 text-xs font-mono tabular-nums disabled:opacity-40';
+                  return (<>
+                    <input type="number" step={50} min={0} disabled={off} value={st.tx_filter_low || 0} className={inp}
+                      onChange={(e) => editTX({ tx_filter_low: parseInt(e.target.value, 10) || 0 })}
+                      onBlur={commitTX} onKeyDown={(e) => { if (e.key === 'Enter') { (e.target as HTMLInputElement).blur(); } }} />
+                    <span className="text-muted-foreground text-xs">–</span>
+                    <input type="number" step={50} min={0} disabled={off} value={st.tx_filter_high || 0} className={inp}
+                      onChange={(e) => editTX({ tx_filter_high: parseInt(e.target.value, 10) || 0 })}
+                      onBlur={commitTX} onKeyDown={(e) => { if (e.key === 'Enter') { (e.target as HTMLInputElement).blur(); } }} />
+                    <span className="text-[10px] text-muted-foreground/70 font-mono">Hz</span>
+                  </>);
+                })()}
+              </div>
+              {/* Mic profile — SmartSDR named mic-EQ/processor presets. */}
+              {!!st.mic_profiles && st.mic_profiles.length > 0 && (
+                <div className="flex items-center gap-2">
+                  <span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">{t('flxp.micProfile')}</span>
+                  <select disabled={off} value={st.mic_profile || ''}
+                    onChange={(e) => { const v = e.target.value; hold.current['mic_profile'] = Date.now() + 2000; setSt((p) => ({ ...p, mic_profile: v })); FlexSetMicProfile(v).catch(() => {}); }}
+                    className="flex-1 min-w-0 h-8 rounded-md border border-input bg-background px-2 text-xs">
+                    {!st.mic_profiles.includes(st.mic_profile || '') && <option value="">—</option>}
+                    {st.mic_profiles.map((p) => <option key={p} value={p}>{p}</option>)}
+                  </select>
+                </div>
+              )}
             </div>
             ) : (
             /* CW keyer controls (replace VOX/PROC/MIC when the slice is in CW). */
@@ -464,6 +578,10 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
               <LevelRow label="NB" on={st.nb} disabled={rxOff} value={st.nb_level} accent="amber" sliderAccent="#d97706"
                 onToggle={() => change('nb', !st.nb, () => FlexSetNB(!st.nb))}
                 onLevel={(v) => change('nb_level', v, () => FlexSetNBLevel(v))} />
+              {/* WNB — wideband noise blanker (the extra hardware NR the Flex has). */}
+              <LevelRow label="WNB" on={st.wnb} disabled={rxOff} value={st.wnb_level} accent="amber" sliderAccent="#f59e0b"
+                onToggle={() => change('wnb', !st.wnb, () => FlexSetWNB(!st.wnb))}
+                onLevel={(v) => change('wnb_level', v, () => FlexSetWNBLevel(v))} />
               <LevelRow label="NR" on={st.nr} disabled={rxOff} value={st.nr_level} accent="cyan" sliderAccent="#0891b2"
                 onToggle={() => change('nr', !st.nr, () => FlexSetNR(!st.nr))}
                 onLevel={(v) => change('nr_level', v, () => FlexSetNRLevel(v))} />
@@ -560,71 +678,29 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                 <span className="px-2 py-1 rounded bg-danger-muted text-danger-muted-foreground text-xs font-bold">{t('flxp.fault')}: {st.amp_fault}</span>
               )}
             </div>
+            {/* Amplifier meters (FWD / ID / TEMP) — moved here from the Meters card
+                and shown compact so they sit with the amp controls. */}
+            {(() => {
+              const meters = st.meters || [];
+              const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
+              const amp = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
+                && !/^(RL|DRV)$/i.test((m.name || '').trim()));
+              if (off || amp.length === 0) return null;
+              return (
+                <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
+                  {amp.map((m) => {
+                    if (/fwd|pwr/i.test(m.name || '') && /dbm/i.test(m.unit || '')) {
+                      return <MeterBar key={m.id} compact label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, dbmToW(m.value))} unit="W" lo={0} hi={2000} accent="#dc2626" />;
+                    }
+                    const acc = /temp|degc|degf/i.test(`${m.unit}${m.name}`) ? '#ea580c' : /volt/i.test(m.unit || '') ? '#2563eb' : '#16a34a';
+                    return <MeterBar key={m.id} compact label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, m.value)} unit={m.unit} lo={m.lo} hi={m.hi} accent={acc} />;
+                  })}
+                </div>
+              );
+            })()}
           </Card>
         )}
 
-        {/* Live meters (UDP VITA-49 stream) */}
-        <Card icon={Gauge} title={t('flxp.meters')}>
-          {(() => {
-            const meters = st.meters || [];
-            if (off || meters.length === 0) {
-              return <p className="text-[11px] text-muted-foreground text-center py-2">{t('flxp.noMeters')}</p>;
-            }
-            const isDbm = (m?: Meter) => !!m && /dbm/i.test(m.unit || '');
-            const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
-            // Radio meters (exclude the amplifier's, which we show separately).
-            const radio = (name: string) => meters.find((m) =>
-              (m.name || '').toUpperCase().includes(name) && !(m.src || '').toUpperCase().includes('AMP'));
-            const sig = radio('LEVEL') || radio('SIGNAL');
-            const fwd = radio('FWDPWR');
-            const swr = radio('SWR');
-            const amp = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
-              && !/^(RL|DRV)$/i.test((m.name || '').trim()));
-            const accentFor = (m: Meter) => /swr/i.test(`${m.unit}${m.name}`) ? '#dc2626'
-              : /temp|degc|degf/i.test(`${m.unit}${m.name}`) ? '#ea580c'
-              : /volt/i.test(m.unit || '') ? '#2563eb' : '#16a34a';
-            // S-meter: dBm → S-units (S9 = -73 dBm on HF, 6 dB per unit).
-            const sUnit = (dbm: number) => {
-              const sv = (dbm + 127) / 6; // S0 = -127 dBm
-              if (sv >= 9) {
-                const over = Math.max(0, Math.round(dbm + 73)); // dB over S9
-                return { display: over > 0 ? `S9+${over}` : 'S9', bar: sv, s: 9, over };
-              }
-              return { display: `S${Math.max(0, Math.round(sv))}`, bar: Math.max(0, sv), s: Math.max(0, sv), over: 0 };
-            };
-            const cur = [
-              sig && (() => { const dbm = peakHold('s', sig.value); const s = sUnit(dbm); return (
-                <MeterBar key="s" label="S-METER" value={s.bar} lo={0} hi={19} accent="#16a34a" display={s.display} extra={`${dbm.toFixed(1)} dBm`}
-                  title={onReportRST ? t('rst.clickToFill') : undefined}
-                  onClick={onReportRST ? () => onReportRST(sMeterRST(s.s, s.over, st.mode)) : undefined}
-                  segColor={(fr) => { const sval = fr * 19; return sval < 9 ? '#16a34a' : sval < 12.33 ? '#f59e0b' : '#dc2626'; }} />
-              ); })(),
-              fwd && (() => { const w = peakHold('p', isDbm(fwd) ? dbmToW(fwd.value) : fwd.value); return (
-                <MeterBar key="p" label="PWR" unit="W" lo={0} hi={120} accent="#dc2626"
-                  value={w} extra={isDbm(fwd) ? `${fwd.value.toFixed(1)} dBm` : undefined} />
-              ); })(),
-              swr && <MeterBar key="w" label="SWR" value={peakHold('w', swr.value)} unit="" lo={1} hi={3} accent="#d97706" />,
-            ].filter(Boolean);
-            return (
-              <>
-                <div className="grid grid-cols-2 sm:grid-cols-3 gap-2">{cur}</div>
-                {amp.length > 0 && (
-                  <div className="border-t border-border/60 pt-2 mt-1">
-                    <div className="text-[10px] font-bold tracking-wider text-muted-foreground mb-1.5">{t('flxp.amplifierHdr')}</div>
-                    <div className="grid grid-cols-2 sm:grid-cols-3 gap-2">
-                      {amp.map((m) => {
-                        if (/fwd|pwr/i.test(m.name || '') && isDbm(m)) {
-                          return <MeterBar key={m.id} label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, dbmToW(m.value))} unit="W" lo={0} hi={2000} accent="#dc2626" extra={`${m.value.toFixed(1)} dBm`} />;
-                        }
-                        return <MeterBar key={m.id} label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, m.value)} unit={m.unit} lo={m.lo} hi={m.hi} accent={accentFor(m)} />;
-                      })}
-                    </div>
-                  </div>
-                )}
-              </>
-            );
-          })()}
-        </Card>
       </div>
     </div>
   );

frontend/src/lib/i18n.tsx

@@ -195,7 +195,7 @@ const en: Dict = {
   'dvkp.voiceKeyer': 'Voice keyer', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Disable voice keyer', 'dvkp.noMsgPre': 'No messages recorded yet. Open', 'dvkp.settingsPath': 'Settings → Audio devices & voice keyer', 'dvkp.noMsgPost': 'to record F1–F6.', 'dvkp.transmit': 'Transmit F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — empty', 'dvkp.message': 'message',
   'agp.portDeselect': 'Port {letter} — click to deselect', 'agp.portSelect': 'Select on port {letter}', 'agp.online': 'online', 'agp.offline': 'offline', 'agp.close': 'Close', 'agp.connecting': 'Connecting…', 'agp.noAntennas': 'No antennas configured.', 'agp.filterOnHint': 'Showing antennas for {band} only — click to show all bands', 'agp.filterOffHint': 'Showing all antennas — click to show only the current band',
   'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
-  'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER',
+  'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER',
   'icmp.spectrum': 'Spectrum', 'icmp.scopeFixed': 'Fixed — double-click / wheel to tune', 'icmp.scopeCenter': 'Center — follows VFO', 'icmp.scopeOff': 'Scope off', 'icmp.scopePanDown': 'Shift scope −50 kHz', 'icmp.scopePanUp': 'Shift scope +50 kHz', 'icmp.scopeCenterVfo': 'Center scope on the current frequency (±50 kHz)', 'icmp.notConnected': "Icom not connected. Enable the Icom CI-V backend in Settings → CAT and connect the radio's USB port.", 'icmp.refresh': 'Refresh', 'icmp.meters': 'Meters', 'icmp.transmit': 'Transmit', 'icmp.power': 'Power', 'icmp.mic': 'Mic', 'icmp.receive': 'Receive', 'icmp.preamp': 'Preamp', 'icmp.filter': 'Filter', 'icmp.noiseNotch': 'Noise / Notch', 'icmp.autoNotch': 'Auto notch filter', 'icmp.apf': 'Audio peak filter (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Wheel or ± to shift · Ctrl+←/→ shifts RIT when active', 'icmp.bandsAntenna': 'Bands & Antenna', 'icmp.antenna': 'Antenna', 'icmp.passband': 'Passband / Notch', 'icmp.pbtCenter': 'Center PBT', 'icmp.manualNotch': 'Manual notch — MN on, then set position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Power the radio ON (boots ~15 s)', 'icmp.powerOffHint': 'Power the radio OFF', 'icmp.powerOffConfirm': 'Switch the radio OFF?',
   'rst.clickToFill': 'Click to set RST tx from the signal',
   'qrz.openTitle': 'Open {call} on QRZ.com',
@@ -384,7 +384,7 @@ const fr: Dict = {
   'dvkp.voiceKeyer': 'Manipulateur vocal', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Désactiver le manipulateur vocal', 'dvkp.noMsgPre': 'Aucun message enregistré. Ouvre', 'dvkp.settingsPath': 'Réglages → Périphériques audio & manipulateur vocal', 'dvkp.noMsgPost': 'pour enregistrer F1–F6.', 'dvkp.transmit': 'Émettre F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — vide', 'dvkp.message': 'message',
   'agp.portDeselect': 'Port {letter} — clic pour désélectionner', 'agp.portSelect': 'Sélectionner sur le port {letter}', 'agp.online': 'en ligne', 'agp.offline': 'hors ligne', 'agp.close': 'Fermer', 'agp.connecting': 'Connexion…', 'agp.noAntennas': 'Aucune antenne configurée.', 'agp.filterOnHint': 'Antennes du {band} uniquement — clic pour afficher toutes les bandes', 'agp.filterOffHint': 'Toutes les antennes affichées — clic pour n’afficher que la bande courante',
   'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
-  'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR',
+  'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR',
   'icmp.spectrum': 'Spectre', 'icmp.scopeFixed': 'Fixe — double-clic / molette pour accorder', 'icmp.scopeCenter': 'Centré — suit le VFO', 'icmp.scopeOff': 'Scope éteint', 'icmp.scopePanDown': 'Décaler le scope −50 kHz', 'icmp.scopePanUp': 'Décaler le scope +50 kHz', 'icmp.scopeCenterVfo': 'Centrer le scope sur la fréquence actuelle (±50 kHz)', 'icmp.notConnected': 'Icom non connecté. Active le backend CI-V Icom dans Réglages → CAT et connecte le port USB de la radio.', 'icmp.refresh': 'Rafraîchir', 'icmp.meters': 'Mesures', 'icmp.transmit': 'Émission', 'icmp.power': 'Puissance', 'icmp.mic': 'Micro', 'icmp.receive': 'Réception', 'icmp.preamp': 'Préampli', 'icmp.filter': 'Filtre', 'icmp.noiseNotch': 'Bruit / Notch', 'icmp.autoNotch': 'Filtre notch auto', 'icmp.apf': 'Filtre de pic audio (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Molette ou ± pour décaler · Ctrl+←/→ décale le RIT si actif', 'icmp.bandsAntenna': 'Bandes & Antenne', 'icmp.antenna': 'Antenne', 'icmp.passband': 'Passe-bande / Notch', 'icmp.pbtCenter': 'Centrer PBT', 'icmp.manualNotch': 'Notch manuel — active MN, puis règle la position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Allumer la radio (démarre en ~15 s)', 'icmp.powerOffHint': 'Éteindre la radio', 'icmp.powerOffConfirm': 'Éteindre la radio ?',
   'rst.clickToFill': 'Clic pour remplir le RST tx depuis le signal',
   'qrz.openTitle': 'Ouvrir {call} sur QRZ.com',

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.19.1';
+export const APP_VERSION = '0.19.2';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -202,6 +202,8 @@ export function FlexSetFilter(arg1:number,arg2:number):Promise<void>;
 
 export function FlexSetMic(arg1:number):Promise<void>;
 
+export function FlexSetMicProfile(arg1:string):Promise<void>;
+
 export function FlexSetMon(arg1:boolean):Promise<void>;
 
 export function FlexSetMonLevel(arg1:number):Promise<void>;
@@ -230,6 +232,8 @@ export function FlexSetSplit(arg1:boolean):Promise<void>;
 
 export function FlexSetTXAntenna(arg1:string):Promise<void>;
 
+export function FlexSetTXFilter(arg1:number,arg2:number):Promise<void>;
+
 export function FlexSetTXSlice(arg1:number):Promise<void>;
 
 export function FlexSetTunePower(arg1:number):Promise<void>;
@@ -240,6 +244,10 @@ export function FlexSetVoxDelay(arg1:number):Promise<void>;
 
 export function FlexSetVoxLevel(arg1:number):Promise<void>;
 
+export function FlexSetWNB(arg1:boolean):Promise<void>;
+
+export function FlexSetWNBLevel(arg1:number):Promise<void>;
+
 export function FlexTune(arg1:boolean):Promise<void>;
 
 export function GetActiveProfile():Promise<profile.Profile>;

frontend/wailsjs/go/main/App.js

@@ -366,6 +366,10 @@ export function FlexSetMic(arg1) {
   return window['go']['main']['App']['FlexSetMic'](arg1);
 }
 
+export function FlexSetMicProfile(arg1) {
+  return window['go']['main']['App']['FlexSetMicProfile'](arg1);
+}
+
 export function FlexSetMon(arg1) {
   return window['go']['main']['App']['FlexSetMon'](arg1);
 }
@@ -422,6 +426,10 @@ export function FlexSetTXAntenna(arg1) {
   return window['go']['main']['App']['FlexSetTXAntenna'](arg1);
 }
 
+export function FlexSetTXFilter(arg1, arg2) {
+  return window['go']['main']['App']['FlexSetTXFilter'](arg1, arg2);
+}
+
 export function FlexSetTXSlice(arg1) {
   return window['go']['main']['App']['FlexSetTXSlice'](arg1);
 }
@@ -442,6 +450,14 @@ export function FlexSetVoxLevel(arg1) {
   return window['go']['main']['App']['FlexSetVoxLevel'](arg1);
 }
 
+export function FlexSetWNB(arg1) {
+  return window['go']['main']['App']['FlexSetWNB'](arg1);
+}
+
+export function FlexSetWNBLevel(arg1) {
+  return window['go']['main']['App']['FlexSetWNBLevel'](arg1);
+}
+
 export function FlexTune(arg1) {
   return window['go']['main']['App']['FlexTune'](arg1);
 }

frontend/wailsjs/go/models.ts

@@ -585,6 +585,10 @@ export namespace cat {
 	    mon: boolean;
 	    mon_level: number;
 	    mic_level: number;
+	    tx_filter_low: number;
+	    tx_filter_high: number;
+	    mic_profile?: string;
+	    mic_profiles?: string[];
 	    atu_status?: string;
 	    atu_memories: boolean;
 	    rx_avail: boolean;
@@ -605,6 +609,8 @@ export namespace cat {
 	    nr_level: number;
 	    anf: boolean;
 	    anf_level: number;
+	    wnb: boolean;
+	    wnb_level: number;
 	    mode?: string;
 	    cw_speed: number;
 	    cw_pitch: number;
@@ -642,6 +648,10 @@ export namespace cat {
 	        this.mon = source["mon"];
 	        this.mon_level = source["mon_level"];
 	        this.mic_level = source["mic_level"];
+	        this.tx_filter_low = source["tx_filter_low"];
+	        this.tx_filter_high = source["tx_filter_high"];
+	        this.mic_profile = source["mic_profile"];
+	        this.mic_profiles = source["mic_profiles"];
 	        this.atu_status = source["atu_status"];
 	        this.atu_memories = source["atu_memories"];
 	        this.rx_avail = source["rx_avail"];
@@ -662,6 +672,8 @@ export namespace cat {
 	        this.nr_level = source["nr_level"];
 	        this.anf = source["anf"];
 	        this.anf_level = source["anf_level"];
+	        this.wnb = source["wnb"];
+	        this.wnb_level = source["wnb_level"];
 	        this.mode = source["mode"];
 	        this.cw_speed = source["cw_speed"];
 	        this.cw_pitch = source["cw_pitch"];

internal/cat/cat.go

@@ -275,6 +275,11 @@ type FlexTXState struct {
 	Mon          bool   `json:"mon"`
 	MonLevel     int    `json:"mon_level"`
 	MicLevel     int    `json:"mic_level"`
+	TXFilterLow  int    `json:"tx_filter_low"`  // TX filter low cut (Hz)
+	TXFilterHigh int    `json:"tx_filter_high"` // TX filter high cut (Hz)
+	// Mic profiles (SmartSDR): the list of available profiles + the loaded one.
+	MicProfile   string   `json:"mic_profile,omitempty"`
+	MicProfiles  []string `json:"mic_profiles,omitempty"`
 	ATUStatus    string `json:"atu_status,omitempty"`
 	ATUMemories  bool   `json:"atu_memories"`
 	// Active RX slice DSP controls.
@@ -296,6 +301,8 @@ type FlexTXState struct {
 	NRLevel      int      `json:"nr_level"`
 	ANF          bool     `json:"anf"`
 	ANFLevel     int      `json:"anf_level"`
+	WNB          bool     `json:"wnb"`
+	WNBLevel     int      `json:"wnb_level"`
 	// CW / mode-specific controls.
 	Mode           string `json:"mode,omitempty"` // active slice mode (CW/USB/LSB/DIGU…)
 	CWSpeed        int    `json:"cw_speed"`
@@ -344,6 +351,8 @@ type FlexController interface {
 	SetMon(bool) error
 	SetMonLevel(int) error
 	SetMic(int) error
+	SetTXFilter(low, high int) error // transmit-audio bandwidth (Hz)
+	SetMicProfile(string) error      // load a SmartSDR mic profile by name
 	ATUStart() error
 	ATUBypass() error
 	SetATUMemories(bool) error
@@ -365,6 +374,8 @@ type FlexController interface {
 	SetANFLevel(int) error
 	SetAPF(bool) error
 	SetAPFLevel(int) error
+	SetWNB(bool) error
+	SetWNBLevel(int) error
 	// CW keyer + mode-specific controls.
 	SetCWSpeed(int) error
 	SetCWPitch(int) error

internal/cat/flex.go

@@ -38,6 +38,8 @@ type Flex struct {
 	slices        map[int]*flexSlice
 	tx            flexTX               // transmit/ATU state pushed by the radio (FlexRadio tab)
 	amp           flexAmp              // external amplifier (PowerGenius XL) state
+	micProfiles   []string             // available mic profiles (SmartSDR "profile mic list")
+	micProfile    string               // currently loaded mic profile
 	txSetAt       map[string]time.Time // status field → when WE last set it (ignore the radio's lagging echo briefly)
 	lastStateSig  string               // last logged derived-state signature (log only on change)
 	boundClientID string               // GUI client (SmartSDR) we bound to; "" until bound. Binding lets this non-GUI client receive GUI-tied data (CW pitch/speed, break-in delay, RF power).
@@ -85,6 +87,8 @@ type flexSlice struct {
 	anfLevel     int
 	apf          bool // CW audio peaking filter
 	apfLevel     int
+	wnb          bool // wideband noise blanker
+	wnbLevel     int
 	filterLo     int      // slice filter low cut (Hz)
 	filterHi     int      // slice filter high cut (Hz)
 	rxAnt        string   // selected RX antenna (e.g. ANT1, ANT2, RX_A)
@@ -108,6 +112,8 @@ type flexTX struct {
 	mon          bool
 	monLevel     int
 	micLevel     int
+	filterLow    int // TX filter low cut (Hz)
+	filterHigh   int // TX filter high cut (Hz)
 	atuStatus    string
 	atuMemories  bool
 	// CW keyer params (set via the top-level "cw" commands).
@@ -209,6 +215,8 @@ func (f *Flex) Connect() error {
 	f.send("sub amplifier all") // external amplifier (PowerGenius XL) operate/standby
 	f.send("sub radio all")     // radio-wide incl. interlock (TX/RX state)
 	f.send("sub cwx all")       // CWX: the LIVE CW speed/pitch/break-in (transmit holds only a static default)
+	f.send("sub profile all")   // mic/global/tx profiles (for the mic-profile dropdown)
+	f.send("profile mic info")  // request the current mic profile list + selection
 	f.send("sub client all")    // learn the GUI client (SmartSDR) so we can bind to it (below)
 	f.startMeters(conn)         // open the UDP VITA-49 stream for live meters
 	if f.spotsEnabled {
@@ -445,6 +453,12 @@ func (f *Flex) handleStatus(payload string) {
 					f.tx.cwBreakInDelay = atoiDefault(val, f.tx.cwBreakInDelay)
 				case "mic_level", "miclevel":
 					f.tx.micLevel = atoiDefault(val, f.tx.micLevel)
+				// TX filter: the transmit STATUS reports the passband as lo/hi (the
+				// SET command is filter_low/filter_high — a SmartSDR quirk).
+				case "lo", "filter_low":
+					f.tx.filterLow = atoiDefault(val, f.tx.filterLow)
+				case "hi", "filter_high":
+					f.tx.filterHigh = atoiDefault(val, f.tx.filterHigh)
 				}
 			}
 			f.mu.Unlock()
@@ -526,6 +540,35 @@ func (f *Flex) handleStatus(payload string) {
 			}
 			f.mu.Unlock()
 		}
+		// Mic-profile object — "profile mic list=A^B^C" (available profiles) and
+		// "profile mic current=<name>" (loaded one). Names can contain spaces, so
+		// values are taken from the raw payload after the key. Logged once so the
+		// exact field names are confirmable on real hardware.
+		if len(fields) >= 2 && fields[0] == "profile" && fields[1] == "mic" {
+			debugLog.Printf("Flex: profile status: %s", payload)
+			if i := strings.Index(payload, "list="); i >= 0 {
+				var profs []string
+				for _, p := range strings.Split(payload[i+len("list="):], "^") {
+					if p = strings.TrimSpace(p); p != "" {
+						profs = append(profs, p)
+					}
+				}
+				f.mu.Lock()
+				f.micProfiles = profs
+				f.mu.Unlock()
+			}
+			// The loaded profile arrives as current=<name> (some firmwares:
+			// selection=<name>); accept either.
+			for _, key := range []string{"current=", "selection="} {
+				if i := strings.Index(payload, key); i >= 0 {
+					cur := strings.TrimSpace(payload[i+len(key):])
+					f.mu.Lock()
+					f.micProfile = cur
+					f.mu.Unlock()
+					break
+				}
+			}
+		}
 		// Interlock object — transmit state (RECEIVE / TRANSMITTING / …).
 		if len(fields) >= 1 && fields[0] == "interlock" {
 			f.mu.Lock()
@@ -744,6 +787,10 @@ func (f *Flex) handleStatus(payload string) {
 			s.apf = val == "1"
 		case "apf_level":
 			s.apfLevel = atoiDefault(val, s.apfLevel)
+		case "wnb":
+			s.wnb = val == "1"
+		case "wnb_level":
+			s.wnbLevel = atoiDefault(val, s.wnbLevel)
 		case "filter_lo":
 			s.filterLo = atoiDefault(val, s.filterLo)
 		case "filter_hi":
@@ -1164,6 +1211,10 @@ func (f *Flex) FlexState() FlexTXState {
 		Mon:          f.tx.mon,
 		MonLevel:     f.tx.monLevel,
 		MicLevel:     f.tx.micLevel,
+		TXFilterLow:  f.tx.filterLow,
+		TXFilterHigh: f.tx.filterHigh,
+		MicProfile:   f.micProfile,
+		MicProfiles:  f.micProfiles,
 		ATUStatus:    f.tx.atuStatus,
 		ATUMemories:  f.tx.atuMemories,
 		// CW keyer (defaults applied so the sliders show sane values pre-read).
@@ -1214,6 +1265,8 @@ func (f *Flex) FlexState() FlexTXState {
 		st.ANFLevel = rx.anfLevel
 		st.APF = rx.apf
 		st.APFLevel = rx.apfLevel
+		st.WNB = rx.wnb
+		st.WNBLevel = rx.wnbLevel
 		st.FilterLo = rx.filterLo
 		st.FilterHi = rx.filterHi
 		st.RXAnt = rx.rxAnt
@@ -1391,6 +1444,8 @@ func (f *Flex) SetANF(on bool) error    { return f.sendSlice("anf", boolFlex(on)
 func (f *Flex) SetANFLevel(l int) error { return f.sendSlice("anf_level", clampLevel(l)) }
 func (f *Flex) SetAPF(on bool) error    { return f.sendSlice("apf", boolFlex(on)) }
 func (f *Flex) SetAPFLevel(l int) error { return f.sendSlice("apf_level", clampLevel(l)) }
+func (f *Flex) SetWNB(on bool) error    { return f.sendSlice("wnb", boolFlex(on)) }
+func (f *Flex) SetWNBLevel(l int) error { return f.sendSlice("wnb_level", clampLevel(l)) }
 
 // ── CW keyer controls (top-level "cw" commands) ──
 
@@ -1608,6 +1663,45 @@ func (f *Flex) SetMic(l int) error {
 	return f.txSet(fmt.Sprintf("transmit set miclevel=%d", l), "mic_level", func(t *flexTX) { t.micLevel = l })
 }
 
+// SetTXFilter sets the transmit-audio bandwidth (low + high cut, in Hz). SmartSDR
+// clamps to legal values per mode; we just pass them through in one command so
+// both edges move together.
+func (f *Flex) SetTXFilter(low, high int) error {
+	if low < 0 {
+		low = 0
+	}
+	if high < low {
+		high = low
+	}
+	// Guard both status field names (the echo comes back as lo/hi, not
+	// filter_low/high) so the radio's lagging echo doesn't snap the inputs back.
+	f.mu.Lock()
+	f.txSetAt["hi"] = time.Now()
+	f.mu.Unlock()
+	return f.txSet(fmt.Sprintf("transmit set filter_low=%d filter_high=%d", low, high), "lo",
+		func(t *flexTX) { t.filterLow, t.filterHigh = low, high })
+}
+
+// SetMicProfile loads a SmartSDR mic profile by name (quoted, as names may hold
+// spaces). Optimistically caches the selection.
+func (f *Flex) SetMicProfile(name string) error {
+	name = strings.TrimSpace(name)
+	if name == "" {
+		return fmt.Errorf("flex: empty mic profile")
+	}
+	f.mu.Lock()
+	connected := f.conn != nil
+	if connected {
+		f.micProfile = name
+	}
+	f.mu.Unlock()
+	if !connected {
+		return fmt.Errorf("flex: not connected")
+	}
+	f.send(fmt.Sprintf("profile mic load \"%s\"", name))
+	return nil
+}
+
 func (f *Flex) ATUStart() error {
 	if !f.connected() {
 		return fmt.Errorf("flex: not connected")

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.19.1"
+	appVersion = "0.19.2"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.

wiki/Amplifiers-and-Switches.md

@@ -0,0 +1,23 @@
+# Amplifiers and Switches
+
+## PowerGenius XL (4O3A) amplifier
+
+Direct TCP connection (Settings → PowerGenius):
+
+- **Operate / Standby** and **fault** display.
+- **Fan-mode** selector (Standard / Contest / Broadcast).
+- When a Flex is connected, the amp controls + its **FWD / ID / TEMP** meters
+  appear in the FlexRadio panel's Amplifier card. See [[FlexRadio]].
+
+## Antenna Genius (4O3A) antenna switch
+
+Over TCP / GSCP — a docked **A/B antenna-switch** widget:
+
+- One row per configured antenna, with a **Port A** and **Port B** button.
+- Colours: green = selected on port A, blue = selected on port B, red (pulsing) =
+  that port is transmitting. Clicking a selected port deselects it (→ None).
+- **Band filter** (funnel icon in the header): shows only the antennas configured
+  for the current band, like the native app. Toggle it off to see all antennas.
+  Antennas with an unknown band mask are always shown.
+
+Configure the host / password in Settings → Antenna Genius.

wiki/Audio-and-Keyers.md

@@ -0,0 +1,36 @@
+# Audio and Keyers
+
+## CW keyer
+
+A CW keyer with **macros** and F-key macros. The keyer **engine** is selectable
+(Settings → CW Keyer):
+
+- **WinKeyer** — K1EL WK1/2/3 over a COM port.
+- **Icom** — the radio's own keyer over CI-V, no extra hardware. Works over the
+  remote link too. (Requires the Icom CAT backend; set break-in to SEMI/FULL or
+  the rig keys the sidetone but stays in RX.)
+- **TCI** — for TCI backends.
+
+## Digital Voice Keyer (DVK)
+
+Record **F1–F6** voice messages and transmit them. Set the audio devices, PTT
+method and gains in Settings → Audio.
+
+- **PTT** method: CAT, RTS, DTR, or none (VOX).
+- **Test PTT** keys the rig briefly. On CAT/OmniRig the key is held ~1.5 s so the
+  transmit command is actually sent (OmniRig is asynchronous and coalesces rapid
+  writes).
+
+## QSO audio recording
+
+Continuous rolling capture. On **Log QSO** the contact is saved to a per-QSO WAV
+(`CALL_YYYYMMDD_HHMMSS.wav`), mixing RX + mic. Configure the recordings folder,
+format (WAV / MP3), pre-roll and gains in Settings → Audio.
+
+## RX audio monitor (USB rigs)
+
+Settings → Audio → **Listen to radio** pipes the rig's received audio (its "USB
+Audio CODEC" input) through your speakers, so you hear the radio inside OpsLog.
+**Talk to radio** keys PTT and pipes your mic to the rig's audio input. (Network
+audio for remote Icom is a work in progress — see
+[[Remote Icom over the Internet]].)

wiki/Awards.md

@@ -0,0 +1,47 @@
+# Awards
+
+OpsLog has a flexible awards engine. Award **definitions** and reference lists are
+shared **globally** across profiles.
+
+## Built-in awards
+
+DXCC, WAS / WAZ / WAC, WPX, IOTA / POTA / SOTA / WWFF, **DDFM** (French
+departments), and more — tracked **worked / confirmed / validated** by band and
+mode.
+
+## How matching works
+
+An award scans a **QSO field** for a reference, by one of:
+
+- **code** — the field value is the reference (e.g. state = `NY`).
+- **description** — the reference's name appears in the field (substring, case-
+  insensitive but **space-sensitive** — "Hongkong" won't match "Hong Kong").
+- **pattern** — a per-reference regex is tested against the field.
+
+Plus **OR rules** (also match if any of these hit), a **leading/trailing** strip,
+a **prefix** added to found references, and a **dynamic** mode (any value counts,
+like POTA).
+
+> **Tip — Hong Kong / Macau style mismatches:** if the data says "Hong Kong" but
+> the reference description is "Hongkong", either fix the description to match, or
+> set that OR-search's *Match by* to **pattern** so the reference's own regex
+> (e.g. `\bHong Kong\b`) is used. In *description* mode the per-reference pattern
+> is ignored.
+
+## Live detection & manual refs
+
+- References are detected **live** as you enter a callsign.
+- You can **manually assign** a reference to a QSO (stored in an ADIF extra so it
+  survives export/import — see [[Import and Export ADIF]]).
+
+## Reference lists & display
+
+- **Import reference lists** for totals and names.
+- Per award, choose what the Recent-QSOs column shows: **reference**, **name**,
+  or **both**. Award columns are opt-in per the Columns picker
+  ([[Recent QSOs and Filters]]).
+
+## Rescan
+
+**Rescan** re-pulls the logbook and recomputes — it picks up fresh LoTW / QRZ /
+eQSL confirmations (see [[QSL Management]]).

wiki/CAT-Control.md

@@ -0,0 +1,49 @@
+# CAT Control
+
+OpsLog has **four native CAT backends** (Settings → CAT). Each auto-reconnects
+and connects *non-blocking*, so a powered-off radio never freezes the app.
+
+| Backend | Use it for |
+|---------|-----------|
+| **OmniRig** | Any OmniRig-supported rig (Rig 1 / Rig 2, hot-swap). |
+| **FlexRadio (SmartSDR)** | FlexRadio 6000/8000 over the TCP API. → [[FlexRadio]] |
+| **Icom CI-V** | Any Icom over **USB** *or* over the internet via its **LAN server**. → [[Icom]] · [[Remote Icom over the Internet]] |
+| **TCI** | SunSDR / ExpertSDR2 and any TCI (WebSocket) server. |
+
+Once connected, frequency / band / mode follow the radio, clicking a cluster spot
+tunes the rig, and (for Flex) cluster spots can be pushed to the panadapter.
+
+## OmniRig
+
+Pick **Rig 1** or **Rig 2** (the two OmniRig slots). Configure the actual COM
+port / baud in OmniRig's own settings. Works with anything OmniRig supports; PTT
+keying via CAT is supported where the rig's OmniRig profile exposes it.
+
+## FlexRadio
+
+Enter the radio's IP (UDP discovery assists). You get a full SmartSDR-style
+control tab — see **[[FlexRadio]]**.
+
+## Icom CI-V (USB)
+
+- **Rig model** — pick your model from the dropdown; it sets the correct **CI-V
+  address** automatically (or choose *Other* and type the hex address).
+- **COM port** + **baud** must match the radio (set *CI-V USB Echo Back* **OFF**
+  on the rig).
+- The model choice also tailors the console (e.g. attenuator steps: 20 dB on an
+  IC-7300, 6/12/18 dB on an IC-7610).
+
+Full console details: **[[Icom]]**.
+
+## TCI
+
+Enter the TCI host + port (default 40001). Gives freq / mode / PTT / split and,
+optionally, panorama spots.
+
+## Notes
+
+- The **digital sub-mode** (FT4 vs FT8) is inferred from the frequency.
+- **Per-band Flex RX/TX antennas** can be configured and are applied
+  automatically on band change (Settings → FlexRadio).
+- Split, RIT/XIT and other rig-specific features are exposed on each backend's
+  control tab where supported.

wiki/Contest-Logging.md

@@ -0,0 +1,27 @@
+# Contest Logging
+
+**Contest tab.** Pick a contest and an exchange, and OpsLog handles the rest.
+
+## Setup
+
+- **Contest** — from the built-in ADIF `CONTEST_ID` list.
+- **Exchange** — a **running serial** (auto-incrementing) or a **fixed exchange**.
+- **Window** — start / end times; QSOs outside are flagged.
+
+## While operating
+
+- OpsLog auto-fills `CONTEST_ID` and the **sent / received serials** (`STX` /
+  `SRX`).
+- **Dupe** detection flags a call already worked in the contest.
+- A live **scoreboard** tracks your progress.
+
+## Export
+
+Export the contest log to **Cabrillo** for submission (Recent QSOs → export), or
+to ADIF. See [[Import and Export ADIF]].
+
+## Tip
+
+Use **Bulk edit field** (right-click in Recent QSOs) to fix a contest field
+across many QSOs at once — e.g. set `CONTEST_ID` or an exchange string on an
+imported batch.

wiki/DX-Cluster-and-Spots.md

@@ -0,0 +1,40 @@
+# DX Cluster and Spots
+
+## Servers
+
+Add multiple cluster servers (Settings). They auto-reconnect; one is the
+**master** used for sending commands. The Cluster tab and the Main-view cluster
+pane share the same live feed.
+
+## Filter sidebar
+
+A show/hide **filter sidebar** (shared by the Cluster tab and the Main pane):
+
+- **Callsign** search, **hide worked**, **group duplicates**.
+- Filter by **band / mode / status / source**.
+
+## Per-spot status and tuning
+
+Each spot is coloured by **status** relative to your log:
+
+- **new** (entity never worked), **new-band**, **new-slot**, **worked**.
+
+Click a spot to **tune the rig** (fills the callsign into the entry strip). A
+multi-band **Band Map** shows panadapter-style strips per band.
+
+**POTA** spots are tagged with their park reference (via `api.pota.app`).
+
+## Sending a spot
+
+Use the **Send Spot** window to announce a DX spot on the master cluster:
+callsign + frequency + a message. The frequency defaults to the **live CAT
+frequency** (full resolution, including sub-kHz).
+
+## Spot alerts
+
+**Tools → Alert management** — Log4OM-style alert rules on **call / country /
+band / mode / spotter**, with **sound**, **visual** and **e-mail** notification.
+Active alerts appear as a discreet bell in the entry strip; click it for the
+list. Alerts are kept briefly and only shown when active.
+
+See also: [[Maps and Antennas]] for turning the beam to a spot.

wiki/FlexRadio.md

@@ -0,0 +1,54 @@
+# FlexRadio
+
+When the CAT backend is a **FlexRadio (SmartSDR)**, OpsLog shows a full
+SmartSDR-style control panel (as a Main-view pane or the FlexRadio tab). It talks
+the radio's TCP API directly and streams live meters over UDP (VITA-49).
+
+## Slices (multi-slice)
+
+FlexRadios can run several receiver slices (A/B/C/D…). OpsLog shows **every
+in-use slice** as a row of buttons under the header:
+
+- Click a slice to make it the **active** slice — the main frequency, mode, DSP
+  and spot-clicks all follow it.
+- Click a slice's **TX** badge to move the transmitter onto it.
+- **Split** is detected only when the TX slice and a same-band RX slice form a
+  genuine split; independent slices on other bands are not shown as split.
+
+Everything you do targets the **active** slice, so a second slice monitoring
+another band never hijacks your main frequency.
+
+## Header
+
+Model + RX/TX state, plus compact **PA voltage** and **PA temperature** readouts
+(temperature turns amber/red as it climbs).
+
+## Transmit
+
+RF power, tune power, **TUNE**, **MOX**, **SPLIT**, speech processor (NOR / DX /
+DX+), VOX (+ level + delay), monitor (+ level), mic gain, **TX filter** low/high
+cut, and the **mic profile** selector. On CW the panel switches to keyer controls
+(speed / pitch / break-in / sidetone / filter).
+
+## Receive (active slice)
+
+RX/TX antenna, AGC mode + threshold, audio level, and the noise/notch filters:
+**NB**, **WNB** (wideband noise blanker), **NR**, **ANF**, and **APF** on CW —
+each a toggle plus level. Filter-width presets per mode.
+
+## Amplifier (PowerGenius XL)
+
+If a PowerGenius XL is detected, its **OPERATE / STANDBY**, **fan mode** and
+**fault** show in an Amplifier card, with the amp's FWD / ID / TEMP meters
+inline. See [[Amplifiers and Switches]].
+
+## Meters
+
+Live UDP meters under the slices: **S-meter** (S-units, click → fill RST),
+**forward power** (W), **SWR**, **mic** level (−40…+10 dB, red = overdrive) and
+**compression**. PA voltage and temperature are in the header.
+
+## Antennas per band
+
+Configure Flex **RX/TX antennas per band** (Settings → FlexRadio); OpsLog applies
+them automatically on band change.

wiki/Getting-Started.md

@@ -0,0 +1,59 @@
+# Getting Started
+
+This walks you from a fresh install to your first logged QSO.
+
+## 1. Set your station
+
+**Settings → Station**: enter your **callsign**, **grid locator** and **name**.
+These feed callsign lookups, the map, awards, the QSL card and the "my station"
+ADIF fields on every QSO.
+
+## 2. (Optional) Connect a radio
+
+**Settings → CAT**, pick a backend and fill its fields — see [[CAT Control]].
+Once connected, the frequency, band and mode fill in automatically as you tune,
+and clicking a cluster spot tunes the rig.
+
+You can log perfectly well **without** a radio — just type the band, mode and
+frequency.
+
+## 3. The entry strip
+
+The strip across the top is the heart of OpsLog (Log4OM-style):
+
+- **Callsign** — type it and the contacted entity's **flag** appears next to the
+  RST fields; the country, CQ/ITU zones and continent resolve offline from
+  `cty.dat`. If QRZ/HamQTH lookup is configured, name / QTH / grid auto-fill and
+  a photo shows in the F2 tab.
+- **RST sent / rcvd**, **Name**, **QTH**, **Grid**.
+- **Band / Mode / Frequency** (TX and, for split, RX).
+- **Start / End time**, **Comment / Note**.
+
+Press **Enter** in any text field to **log** the QSO. The contact drops into
+**Recent QSOs** below.
+
+> Mode comes from the radio; the digital sub-mode (FT4 vs FT8) is inferred from
+> the frequency.
+
+## 4. Look around
+
+- **Recent QSOs** — your log; double-click a row to edit every field.
+  See [[Recent QSOs and Filters]].
+- **Worked-before matrix** — as you type a call, see if/when you worked that
+  entity, per band/mode slot.
+- **Main view** — two configurable panes (Settings → General → *Main view*): a
+  great-circle map, the cluster, the FlexRadio or Icom console, Net control, and
+  more. See [[Maps and Antennas]].
+
+## 5. Profiles
+
+Every setting is **per-profile**. A profile can log to the local SQLite file or
+a shared **MySQL** database (multi-operator). Create one per call / station /
+event. See [[Profiles and Databases]].
+
+## Next steps
+
+- Chase spots → [[DX Cluster and Spots]]
+- Track awards → [[Awards]]
+- Send confirmations → [[QSL Management]]
+- Design a card → [[QSL Card Designer]]

wiki/Home.md

@@ -0,0 +1,41 @@
+# OpsLog
+
+A modern, fast ham-radio logger for **Windows** — Log4OM-style entry, real-time
+CAT for **OmniRig**, native **FlexRadio/SmartSDR**, native **Icom CI-V** (USB
+*and* remote-over-internet, replacing RS-BA1) and **TCI** (SunSDR / Expert
+Electronics), a DX cluster with spot alerts, awards tracking, maps, contest
+logging, QSL management and a QSL-card designer.
+
+Built with **Wails v2** (Go backend + React/TypeScript frontend), **pure Go**
+(no CGO). SQLite holds the configuration; the logbook can be the local SQLite
+file *or* a **shared MySQL** database so several operators run one log. Fully
+themeable and bilingual (English / French).
+
+Developed by **F4BPO**.
+
+## New here? Read these first
+
+1. **[[Installation]]** — download / build and first launch.
+2. **[[Getting Started]]** — the entry strip, logging your first QSO, choosing a
+   profile.
+3. **[[CAT Control]]** — connect your radio (OmniRig, FlexRadio, Icom, TCI).
+
+## What OpsLog does
+
+| Area | Pages |
+|------|-------|
+| Enter and manage QSOs | [[Logging Basics]] · [[Recent QSOs and Filters]] · [[Import and Export ADIF]] |
+| Control your radio | [[CAT Control]] · [[FlexRadio]] · [[Icom]] · [[Remote Icom over the Internet]] |
+| Chase DX | [[DX Cluster and Spots]] · [[Maps and Antennas]] |
+| Station hardware | [[Amplifiers and Switches]] · [[Audio and Keyers]] |
+| Events & contests | [[Contest Logging]] · [[Net Control]] · [[Multi-Operator Live Status]] |
+| Confirmations | [[Awards]] · [[QSL Management]] · [[QSL Card Designer]] |
+| Configuration | [[Settings and Data]] · [[Security]] · [[Profiles and Databases]] |
+| Something wrong? | [[Troubleshooting]] |
+
+## Design in one line
+
+Everything you configure (settings, profiles, rigs, cluster nodes, award lists,
+QSL templates, lookup cache) lives in a **local SQLite** file so the UI is
+instant. Only the **QSOs** live where the active profile points them — local
+SQLite or a shared MySQL. See [[Profiles and Databases]].

wiki/Icom.md

@@ -0,0 +1,55 @@
+# Icom
+
+When the CAT backend is **Icom CI-V** (USB or network), OpsLog shows a full
+RS-BA1-style console — the same panel whether you're on USB or remote.
+
+For setup, see [[CAT Control]]; for the internet link, see
+[[Remote Icom over the Internet]].
+
+## Choosing your model
+
+Pick your model from the **Rig model** dropdown in Settings → CAT — it sets the
+CI-V address and tailors the console to the radio (e.g. attenuator steps).
+The model is also auto-detected from the radio's CI-V ID.
+
+## Console
+
+- **Twin VFO readout** (MAIN / SUB): big tabular frequency, mode badge, band, and
+  RIT/ΔTX offset, with a **mode-button row** (SSB / CW / RTTY / PSK / AM / FM).
+- **Spectrum scope + waterfall**: ON/OFF, CTR/FIX, double-click to tune, and
+  **◀ ⊙ ▶** to centre the scope on the current frequency (±50 kHz) and pan.
+- **Live meters** always visible: S-meter (click → fill RST), power in watts, SWR.
+- **Receive DSP:** AF / RF gain, squelch, AGC, preamp, **attenuator** (steps match
+  the model — e.g. 20 dB on an IC-7300, 6/12/18 dB on an IC-7610), filter
+  (FIL1/2/3), NB, NR, ANF, and — **on CW only** — the **APF** (audio peak filter).
+- **Passband / notch:** Twin PBT (inner / outer) and manual notch + position.
+- **Transmit:** RF power, MOX, TUNE, **split with automatic offset** (+5 kHz SSB /
+  +1 kHz CW), monitor. On **voice modes only**: mic gain, compressor, VOX (+ gain
+  + anti-VOX). Controls that don't apply to the current mode are hidden.
+- **Bands & antenna:** one-touch band buttons, ANT1/ANT2.
+- **Clarifiers:** RIT and ΔTX, wheel / ± tuning (Ctrl + ← / → nudges RIT).
+
+## Power ON / OFF
+
+- **Network:** ON and OFF buttons are shown — the radio's LAN server answers even
+  in standby, so ON works.
+- **USB:** the buttons are **hidden**. Over USB the CI-V interface is unpowered
+  while the rig is off, so a power-ON command can't reach it — turn the radio on
+  physically.
+
+The app never wakes the rig on connect (manual by design).
+
+## CW keying
+
+CW can run through the **radio's own keyer** over CI-V — no extra hardware, and
+it works over the remote link too. See [[Audio and Keyers]].
+
+## Model-specific notes
+
+- **IC-7300 / IC-705 / IC-9100:** single-receiver, single-step attenuator
+  (20 dB); the IC-9100 is USB-only (no LAN server).
+- **IC-7610 / IC-9700:** dual scope (main/sub); stepped attenuator; LAN server
+  for remote.
+- If the **scope is blank on a single-scope rig run at a non-default CI-V
+  address**, OpsLog now detects the model from the CI-V ID, not the configured
+  address, so it decodes single-scope frames correctly.

wiki/Import-and-Export-ADIF.md

@@ -0,0 +1,32 @@
+# Import and Export ADIF
+
+OpsLog is **ADIF 3.1.7 compliant**: a full field dictionary, 30 promoted columns,
+a generic "extra fields" editor for anything not promoted, and standard/all
+export modes.
+
+## Import
+
+Import an `.adi` / `.adif` file into the active profile's logbook. On import,
+OpsLog parses every field, maps standard fields to columns and keeps unknown but
+valid ADIF fields in a per-QSO **extras** store (editable later). Country / zones
+are enriched from `cty.dat` where missing.
+
+## Export
+
+- **Whole log**, **selected rows**, or the **filtered view** (no limit) — see
+  [[Recent QSOs and Filters]].
+- **Standard** mode exports the common promoted fields; **All** mode also exports
+  every extra field.
+- **Cabrillo** export for contest submission.
+
+## Round-trip safety
+
+Award references you assign manually are stored in an ADIF extra field
+(`APP_OPSLOG_AWARDREFS`), so exporting your full log and re-importing it does not
+lose your award-reference assignments.
+
+## Tips
+
+- To move a batch of QSOs between logs, export selected → import into the other
+  profile.
+- Use **Find duplicates** (Tools) after importing to catch overlaps.

wiki/Installation.md

@@ -0,0 +1,44 @@
+# Installation
+
+OpsLog is a single Windows executable — no installer, no runtime to add. Pure Go
++ an embedded WebView2 (present on Windows 10/11 by default).
+
+## Download and run
+
+1. Grab the latest `OpsLog.exe` from the project's **Releases** page.
+2. Put it in its own folder (it will create a `data/` folder next to itself).
+3. Double-click to run. On first launch you pick a **language** (English /
+   French) and OpsLog creates its local database.
+
+> **Where is my data?** A `data/` folder is created next to the executable,
+> holding the SQLite config + local logbook, QSL templates, recordings and
+> backups. Keep the exe and `data/` together, or back up `data/`. See
+> [[Settings and Data]].
+
+## Building from source (developers)
+
+OpsLog is built with **Wails v2.11**.
+
+```bash
+# Dev — Vite hot-reload; Go methods reachable at http://localhost:34115
+wails dev
+
+# Production build → build/bin/OpsLog.exe
+wails build
+
+# Regenerate Go↔TS bindings after changing exported App methods
+wails generate module
+```
+
+Prerequisites: Go, Node.js, and the Wails CLI (`~/go/bin/wails.exe`). No CGO /
+C toolchain is needed.
+
+## First-run checklist
+
+- **Settings → General** — language, theme, and the two Main-view panes.
+- **Settings → Station** — your callsign, grid, name (used for lookups, awards,
+  QSL cards and the map).
+- **Settings → CAT** — connect your radio ([[CAT Control]]).
+- **Settings → Lookup** — QRZ.com / HamQTH credentials for callsign lookup.
+
+Continue with **[[Getting Started]]**.

wiki/Logging-Basics.md

@@ -0,0 +1,45 @@
+# Logging Basics
+
+## The entry strip
+
+The entry strip logs a QSO from any `<input>` inside it — press **Enter** to
+save. Fields: callsign, RST tx/rx, name, QTH, grid, band, mode, TX/RX frequency
+(split), start/end time, comment and note.
+
+- **Callsign** drives everything: the **flag**, offline DXCC resolution (country,
+  CQ/ITU zones, continent) from `cty.dat` including `/MM` `/AM` `/B` and call-area
+  handling (`/8`, `/W6`), plus **ClubLog** DXpedition date overrides.
+- **Callsign lookup** (QRZ.com / HamQTH) fills name / QTH / grid and shows the
+  photo and a QRZ.com tab. Configure it in Settings → Lookup.
+- **ESC** clears the callsign (and stops CW).
+
+## Editing a QSO
+
+Double-click any row in **Recent QSOs** (or Worked-before) to open the full
+editor — every ADIF field across tabs: QSO info, contacted station's details,
+award refs, QSL info, contest, sat/prop, my station, and a generic **extra
+fields** editor for any ADIF field not promoted to a column.
+
+## Bulk operations
+
+Select rows in Recent QSOs, right-click:
+
+- **Fix country & zones** from `cty.dat`, or **update from QRZ / ClubLog**.
+- **Bulk edit field** — set one field across many QSOs (QSL/upload status, my
+  station, contest, propagation, contacted-station refs, comment…). Great for
+  flipping a batch to *Requested* before an upload.
+- **Send to** a QSL service, **export** selected / filtered to ADIF or Cabrillo,
+  **delete**.
+
+## Find duplicates
+
+**Tools → Find duplicates** groups QSOs by same **call + band + mode** (optionally
+same day or same minute) and lets you pick which to delete.
+
+## Notes
+
+- **Worked-before matrix** shows prior contacts with the entity per band/mode
+  slot as you type.
+- Awards references are detected **live** as you enter a call (see [[Awards]]).
+
+See also: [[Recent QSOs and Filters]] · [[Import and Export ADIF]]

wiki/Maps-and-Antennas.md

@@ -0,0 +1,38 @@
+# Maps and Antennas
+
+## Main view
+
+The Main view is **two configurable panes** (per profile, Settings → General →
+*Main view*). Choose from: great-circle map, locator (street) map, the cluster
+grid, the worked-before grid, recent QSOs, the **FlexRadio** controls, the
+**Icom** console, or the **Net control** panel.
+
+## Great-circle map
+
+- Short/long-path **distance & azimuth** to the worked station.
+- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite (all
+  labelled).
+- The **antenna beam lobe(s)** are drawn from the rotor azimuth.
+
+## Locator (street) map
+
+An OSM street map centred on the contacted grid square — handy for local /
+portable contacts. No API key.
+
+## Rotor compass
+
+An azimuthal-equidistant **click-to-turn** compass driven by **PstRotator**. The
+current heading and target are shown; click a bearing to turn the rotor.
+
+## Ultrabeam
+
+Ultrabeam antennas are supported with three modes — **Normal**, **180° reverse**,
+**Bidirectional**:
+
+- The **radiating direction** is shown in green and the **mechanical boom** in
+  grey, on both the compass and the map, so you always know where the antenna
+  actually points.
+- The antenna **follows the rig frequency** (band change → retune), and retunes
+  immediately when you click a spot.
+
+Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch).

wiki/Multi-Operator-Live-Status.md

@@ -0,0 +1,42 @@
+# Multi-Operator Live Status
+
+For a **multi-op special-event call** on a shared MySQL logbook (e.g. TM74TFR),
+OpsLog can publish who is on the air, on which band/mode/frequency, as a live
+page you embed on the station's **QRZ.com** bio.
+
+## Enable it
+
+1. Point the profile's logbook at a **shared MySQL** database
+   ([[Profiles and Databases]]).
+2. **Settings → General → Publish live operator status.**
+
+Each OpsLog instance then heartbeats its current activity (operator call, band,
+frequency, mode) into a `live_status` table every ~15 s. OpsLog only **writes**
+to the database — it is not a web server.
+
+## The web page
+
+A small PHP renderer, `docs/livestatus/tm74-status.php`, reads that table and
+produces a live page/image. Put it on **your own** web server (the one reachable
+from the internet):
+
+1. Edit the credentials at the top: `$DB_HOST`, `$DB_PORT`, `$DB_NAME`,
+   `$DB_USER`, `$DB_PASS` — pointing at the **same** MySQL as OpsLog's logbook.
+2. Embed it on QRZ (QRZ strips `<script>`/`<iframe>`, so use an image):
+
+   ```html
+   <img src="https://your-server/tm74-status.php?img=1">
+   ```
+
+   or link the real-time page: `https://your-server/tm74-status.php`.
+
+## Troubleshooting the PHP page
+
+- **`Connection refused`** — MySQL is refusing the connection. Most common cause:
+  the server's `bind-address` is `127.0.0.1` (localhost only). Set it to the LAN
+  IP / `0.0.0.0`, grant the `opslog` user for the web server's IP, and open the
+  firewall.
+- **Runs on a non-standard MySQL port** — set `$DB_PORT` and pass it as the 5th
+  `mysqli` argument (the shipped script already does).
+- Redeploy the current `tm74-status.php` if you edited an old copy — the shipped
+  version fails gracefully instead of throwing a PHP fatal error.

wiki/Net-Control.md

@@ -0,0 +1,30 @@
+# Net Control
+
+**Directed-net logging** (Tools → Net) — run a directed net or round-table and
+log the whole thing at once, Log4OM-style.
+
+## How it works
+
+- **Roster** (right) — the net's registered stations, stored globally in
+  `nets.json` (shared across profiles). Add contacts with a QRZ/HamQTH prefill.
+- **On-air** (left) — the active session (in memory): put a station on the air
+  (check it in), and log the whole net when done.
+- Frequency / band / mode of each logged QSO come from **live CAT** at log time
+  (falling back to the last known values if CAT is off).
+
+## Working a net
+
+1. Open / create a net and **Open** it.
+2. Double-click a roster station (or use *Put on air*) to put it on the air —
+   this starts its QSO (time on).
+3. Double-click an on-air row to open the full QSO editor (edit any field).
+4. **Log & end** a station to write its QSO to the logbook (time off = now).
+
+## Worked-before
+
+Click a station (on air or in the roster) to see prior contacts with it in the
+**worked-before** panel below the on-air column. The panel height is adjustable
+(drag its top edge).
+
+> The active session is in-memory only — closing the app mid-net drops
+> un-logged on-air stations.

wiki/Profiles-and-Databases.md

@@ -0,0 +1,35 @@
+# Profiles and Databases
+
+## Profiles
+
+Every setting in OpsLog is **per-profile**: station identity, CAT, lookup, QSL
+defaults, awards display, antennas, and which logbook to use. Create one profile
+per callsign / station / event.
+
+Switch or manage profiles in Settings. The active profile decides which logbook
+your QSOs go to.
+
+## Config vs. logbook — two different stores
+
+| Store | What | Where |
+|-------|------|-------|
+| **Config** | settings, profiles, rigs/antennas, cluster nodes, lookup cache, award lists, QSL templates | always the **local SQLite** file under `data/` |
+| **Logbook** | your QSOs | where the active profile points — local SQLite **or** shared MySQL |
+
+Keeping config local means the UI is instant even when the logbook is a far-away
+MySQL server.
+
+## Shared MySQL logbook (multi-operator)
+
+Point a profile's logbook at a **MySQL** database so several operators run **one
+log** — e.g. a multi-op special-event call. Configure the host / database /
+credentials in the profile's database settings.
+
+This is also what powers [[Multi-Operator Live Status]] (each instance heartbeats
+its activity into a `live_status` table).
+
+## Backups
+
+Optional **database + ADIF backup at shutdown** (Settings → Backup). Regardless,
+copying the `data/` folder backs up your config and local logbook. See
+[[Settings and Data]].

wiki/QSL-Card-Designer.md

@@ -0,0 +1,35 @@
+# QSL Card Designer
+
+**Tools → QSL Card Designer…** turns a few photos into a polished eQSL card.
+
+## Design flow
+
+1. **Pick 1–6 photos** (jpeg/png). OpsLog analyses them offline (detail /
+   luminance grid) and proposes **3 designs** — callsign placed in the calmest
+   zone of the best photo, operator name, CQ/ITU zones + locator line, country
+   flag, the other photos as bordered inserts, and a per-QSO confirmation box.
+2. **Fine-tune**: click an element to select, drag to move; change font / style
+   preset (gel gold, gel silver, classic white outline, script, flat) and the
+   per-preset knobs on the right. The **QSO info box** has opacity, background
+   colour, corner radius, title and text-colour controls.
+3. **Save** the template. Photos are copied into
+   `data/qsl/templates/<id>/` (the originals can move afterwards). One template
+   can be the **default per profile**.
+
+## Sending
+
+Right-click a QSO → **Send eQSL by e-mail**. The card is rendered with that QSO's
+data, rasterised to a ≤ 800 KB JPEG, archived in `data/qsl/outbox/`, and sent via
+the configured SMTP account to the address from the QRZ/HamQTH lookup. On success
+the QSO is stamped `EQSL_SENT=Y`.
+
+The e-mail subject/body templates live in the designer, with
+`{CALL} {DATE} {BAND} {MODE} {MYCALL}` variables.
+
+## Fonts & flags
+
+Fonts: Archivo Black, Lilita One, Baloo 2, Oswald, Great Vibes, Allura (all OFL,
+embedded); Cooper Black is offered when MS Office installed it. Flags:
+flag-icons (MIT), embedded for the commonly-worked DXCC entities.
+
+See also: [[QSL Management]].

wiki/QSL-Management.md

@@ -0,0 +1,44 @@
+# QSL Management
+
+**Tools → QSL Manager.** Upload and download confirmations for the online QSL
+services, and manage paper QSL.
+
+## Services
+
+| Service | Upload | Download confirmations |
+|---------|:------:|:----------------------:|
+| **LoTW** | ✔ (via TQSL) | ✔ |
+| **QRZ.com** | ✔ | ✔ |
+| **eQSL** | ✔ | ✔ |
+| **ClubLog** | ✔ (batched ADIF) | — |
+| **HRDLog** | ✔ | — |
+| **POTA** | hunter-log sync | ✔ (park tags) |
+| **Paper** | — | set sent/received + via |
+
+## Uploading
+
+Pick a service, find the QSOs (by callsign or a filter), select and upload.
+**Bulk edit field** (right-click in Recent QSOs) flips a batch's upload status to
+*Requested* first, if you gate uploads that way.
+
+## Downloading confirmations
+
+Pick a service and a **date window** (All / Since last download / a date), then
+**Download confirmations**. OpsLog matches each confirmation to your log
+(call + minute + band + mode), stamps it (`LOTW_RCVD`, `EQSL_RCVD`,
+`QRZ download`…), and optionally **adds not-found** QSOs. Downloading
+auto-refreshes the **award** stats.
+
+- **LoTW** and **paper QSL** are the award-valid confirmations for ARRL awards;
+  eQSL / QRZ count only against their own confirmations.
+- **LoTW upload** goes through **TQSL** (ARRL's signer) — set the TQSL path and
+  station location in Settings.
+
+## E-mail eQSL
+
+Right-click a QSO → **Send eQSL by e-mail** via the configured SMTP account. The
+[[QSL Card Designer]] card is rendered with that QSO's data and sent to the
+address found by the QRZ/HamQTH lookup.
+
+> Outlook/Hotmail disable basic-auth SMTP — use **Gmail with an app password**,
+> or a Microsoft app password.

wiki/README-PUBLISHING.md

@@ -0,0 +1,45 @@
+# Publishing this wiki to GitHub
+
+These files are the source for the **OpsLog GitHub Wiki**. GitHub stores a wiki
+as its own git repository (`<repo>.wiki.git`), so publishing means pushing these
+`.md` files into it.
+
+## Automatic — via the release script (recommended)
+
+The release task (`.vscode/release.ps1`, VS Code → *Tasks: Run Task* → *Release
+OpsLog*) **publishes the wiki automatically** at the end of every release: it
+clones `github.com/GregTroar/OpsLog.wiki.git` to a temp folder, copies every page
+from this `wiki/` folder (except this guide), and pushes only if something
+changed. Auth reuses your GitHub git credential (set up by `gh auth login`).
+
+**One-time:** on GitHub, open the repo → **Wiki** tab → *Create the first page* →
+Save. This initialises the wiki repo so the script's clone succeeds.
+
+## Manual (if you want to push between releases)
+
+```bash
+# One-time: clone the wiki repo NEXT TO the project (not inside it)
+git clone https://github.com/GregTroar/OpsLog.wiki.git
+
+# Then, to update:
+cp wiki/*.md ../OpsLog.wiki/          # (skip README-PUBLISHING.md if you like)
+cd ../OpsLog.wiki
+git add . && git commit -m "Update wiki" && git push
+```
+
+The pages appear immediately under the repository's **Wiki** tab.
+
+## How the pages work
+
+- Each `.md` file is one wiki page. The **file name** becomes the page title and
+  URL: `Getting-Started.md` → page *Getting Started* at `.../wiki/Getting-Started`.
+- **`_Sidebar.md`** renders as the navigation sidebar on every page.
+- **`_Footer.md`** renders at the bottom of every page.
+- Link between pages with `[[Page Name]]` (wiki-link) or a normal relative link
+  `[text](Getting-Started)`.
+- `Home.md` is the wiki landing page.
+
+## Keep it in sync with the README
+
+The wiki mirrors [`README.md`](../README.md). When you add a feature, update the
+matching wiki page and the README together so they don't drift.

wiki/Recent-QSOs-and-Filters.md

@@ -0,0 +1,33 @@
+# Recent QSOs and Filters
+
+## The Recent QSOs grid
+
+The main log table. Double-click a row to edit; right-click for bulk actions
+(see [[Logging Basics]]). Columns are configurable — click **Columns** to choose
+which are visible; your selection is saved (per profile).
+
+### Award columns
+
+Each defined award can show a column with the reference the QSO counts for. These
+columns are **hidden by default** and opt-in from the Columns picker — turn on
+only the awards you're chasing. Your choice persists across restarts.
+
+## Advanced filter builder
+
+Click the filter button to open the **QSO filter builder** (Log4OM-style):
+
+- Add one or more **conditions**: *field · operator · value*.
+- Operators: equals, not-equal, contains, starts/ends with, greater/less
+  (or equal), is empty, is not empty.
+- Join conditions with **ALL (AND)** or **ANY (OR)**.
+- Save named **presets** (they travel with the `data/` folder).
+- The field dropdown is sorted alphabetically to find things fast.
+
+The filtered view can be exported: **selected rows** or the **whole filtered
+view** (no row limit) → ADIF or Cabrillo.
+
+## Worked-before matrix
+
+As you type a callsign, the worked-before grid shows prior contacts with that
+**entity**, arranged by band/mode slot, so you instantly see what's new (new
+DXCC / new band / new slot) versus already worked.

wiki/Remote-Icom-over-the-Internet.md

@@ -0,0 +1,55 @@
+# Remote Icom over the Internet
+
+OpsLog speaks the Icom radio's **built-in network protocol** directly, so it
+**replaces both the Icom Remote Utility and RS-BA1**. Radios with a LAN server —
+**IC-7610, IC-9700, IC-705, IC-7760, IC-905** — can be operated over the
+LAN/internet with the full [[Icom]] console.
+
+> The **IC-9100 has no LAN server** — it is USB-only.
+
+## On the radio (one-time)
+
+In the radio's **Network** menu:
+
+1. Enable the network / *Remote settings*.
+2. Set a **Network User1** name and password.
+3. Note the radio's **IP address** and its **CI-V address**.
+4. Make sure the Icom **Remote Utility is closed** on every PC — OpsLog binds the
+   same local UDP ports, so they can't both run.
+
+## In OpsLog
+
+Settings → CAT → backend **Icom CI-V (network / remote)**:
+
+- **Host** — the radio's IP or hostname.
+- **User / Password** — the Network User1 credentials.
+- **Rig model / CI-V address** — pick the model.
+
+Save. OpsLog logs in, obtains a session **token** (auto-renewed so control never
+drops after ~2 minutes), opens the **CI-V tunnel**, and the whole console works
+over the net — freq / mode / DSP / TX / RIT / CW / scope.
+
+## How it stays solid
+
+- **Token renewal** every ~45 s keeps the session alive.
+- **Receive-side retransmit**: under the heavy panadapter stream, lost UDP
+  packets are re-requested, so the link doesn't drop when the scope is on.
+- **Standby-tolerant**: the radio's server answers pings even when the radio is
+  off, so the session doesn't flap — the console + power ON button stay reachable.
+- **Manual power** ON / OFF (the app never wakes the rig on connect).
+
+## Audio
+
+Network **audio** is a work in progress. For now, use the radio in **USB + a
+voice link** (e.g. Mumble) alongside the network CAT, or run OpsLog on the
+station PC via remote desktop. See [[Audio and Keyers]] for the USB-monitor
+option.
+
+## Troubleshooting
+
+- **"Login rejected"** → wrong Network User1 name/password.
+- **Can't bind local port / dial fails** → the Icom **Remote Utility** is still
+  running; close it.
+- **Link drops when the scope turns on** → should be fixed by receive-side
+  retransmit; if it persists, check the log (`icom net:` lines) and network
+  quality. See [[Troubleshooting]].

wiki/Security.md

@@ -0,0 +1,24 @@
+# Security
+
+## Secret vault
+
+Opt-in **passphrase encryption** of the stored passwords (QRZ, cluster, eQSL,
+SMTP, Icom network, etc.) using **AES-GCM + PBKDF2**.
+
+- Enable it in Settings; you set a passphrase.
+- Encrypted values are marked `enc:v1:` and are **portable** (they travel with
+  the `data/` folder).
+- A single **unlock prompt at launch** decrypts them for the session.
+
+If you forget the passphrase, the encrypted secrets can't be recovered — re-enter
+them.
+
+## What OpsLog sends where
+
+- **Callsign lookups** go to QRZ.com / HamQTH with your credentials.
+- **QSL uploads/downloads** go to the services you configure (LoTW via TQSL, QRZ,
+  eQSL, ClubLog, HRDLog).
+- **Telemetry** is a once-a-day anonymous heartbeat (random install ID + version
+  + OS — no callsign, no QSO data). Opt out in Preferences.
+- Everything else stays local (or on your own MySQL / web server for the
+  multi-op live status).

wiki/Settings-and-Data.md

@@ -0,0 +1,51 @@
+# Settings and Data
+
+## Where everything lives
+
+A `data/` folder is created **next to `OpsLog.exe`**:
+
+- **Config** (SQLite): settings, profiles, rigs/antennas, cluster nodes, lookup
+  cache, award lists, QSL templates. Always local, so the UI is instant.
+- **Local logbook** (SQLite): QSOs, when the profile logs locally.
+- `data/qsl/templates/…` — QSL card templates and their photos.
+- `data/qsl/outbox/…` — sent QSL card JPEGs.
+- Recordings folder (configurable) — per-QSO WAV/MP3.
+- Backups.
+
+Back up your setup by copying `data/` (and keep it with the exe). See
+[[Profiles and Databases]] for local-vs-MySQL logbooks.
+
+## Settings map
+
+| Section | What |
+|---------|------|
+| **General** | language, theme, Main-view panes, live-status publish |
+| **Station** | your callsign, grid, name, address (my-station ADIF) |
+| **CAT** | radio backend + connection ([[CAT Control]]) |
+| **Lookup** | QRZ.com / HamQTH credentials |
+| **FlexRadio** | per-band RX/TX antennas |
+| **Audio** | DVK / recorder devices, PTT, gains, RX monitor |
+| **CW Keyer** | WinKeyer / Icom / TCI engine + macros |
+| **External services** | LoTW (TQSL), QRZ, eQSL, ClubLog, HRDLog, POTA |
+| **Email** | SMTP for eQSL-by-email |
+| **PowerGenius / Antenna Genius / Rotator / Ultrabeam** | station hardware |
+| **Backup** | database + ADIF backup at shutdown |
+
+## Appearance & language
+
+Four themes (Warm light, Warm dark, Graphite dark, High contrast) plus **Auto**
+(follows the OS). Full **English / French** UI with a first-run flag chooser and
+a switcher in Settings → General.
+
+## Integrations (outbound UDP)
+
+Push the current frequency to **PstRotator**, radio info in **N1MM `RadioInfo`**
+format, or an **ADIF record on each logged QSO** — so external tools stay in sync.
+
+## Other
+
+- **Autostart** external programs (WSJT-X, JTAlert, rotator control…) at launch,
+  skipping any already running.
+- **Update check** at startup (toggleable).
+- **Anonymous usage telemetry** — a once-a-day heartbeat (random install ID +
+  version + OS; no callsign or QSO data). Opt out in Preferences.

wiki/Troubleshooting.md

@@ -0,0 +1,58 @@
+# Troubleshooting
+
+## Where's the log file?
+
+OpsLog writes a diagnostic log. The path is shown in Settings (and can be opened
+from there). When reporting a problem, include the relevant lines — they're
+prefixed by subsystem (`Flex:`, `icom net:`, `icom scope`, `antgenius:`,
+`cluster:`, `qslmgr:log`, `audio:`…).
+
+## CAT
+
+- **Radio not connecting** — check the backend fields (COM port + baud for USB;
+  IP/credentials for network). OpsLog connects non-blocking, so it won't freeze —
+  watch the CAT status.
+- **Icom: no CAT at all over USB** — the CI-V address must match the radio; pick
+  your **model** from the dropdown (it sets the address) and set *CI-V USB Echo
+  Back* **OFF** on the rig.
+- **Icom scope blank on an IC-7300** — this was a bug where the scope decoder was
+  chosen from the configured CI-V address; it now uses the model detected from the
+  CI-V ID, so a single-scope rig run at address `0x98` decodes correctly. Update
+  to the latest build.
+- **Icom attenuator button does nothing** — the dB steps are model-specific; make
+  sure the right model is selected (IC-7300 = 20 dB, IC-7610 = 6/12/18 dB).
+
+## Remote Icom
+
+- **Login rejected** → wrong Network User1 name/password.
+- **Can't bind local port** → the Icom **Remote Utility is still running** —
+  close it.
+- **Link drops with the scope on** → receive-side retransmit should hold it; if
+  not, check network quality and the `icom net:` log lines. See
+  [[Remote Icom over the Internet]].
+
+## FlexRadio
+
+- **A control reads 0 / stale at startup** — some SmartSDR status fields use short
+  names (e.g. the TX filter is reported as `lo`/`hi`, not `filter_low/high`). If a
+  value never populates, capture the `Flex: … status` log line and report it.
+- **Antenna wrong band on a spot click** — fixed: `SetFrequency`/`SetMode` update
+  the slice cache immediately so the panel and the Ultrabeam follow don't chase a
+  stale frequency.
+
+## Multi-op live status PHP
+
+`Connection refused` from the PHP page is almost always MySQL `bind-address =
+127.0.0.1` or a firewall/grant issue — see
+[[Multi-Operator Live Status]].
+
+## DVK / PTT
+
+- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the async
+  OmniRig write is actually sent; if it still doesn't key, the rig's OmniRig
+  profile may not expose CAT TX keying — use RTS/DTR or VOX.
+
+## Still stuck?
+
+Open an issue with: what you did, what happened, your radio/model, and the
+relevant log lines.

wiki/_Footer.md

@@ -0,0 +1,2 @@
+---
+**OpsLog** — a modern ham-radio logger by **F4BPO** · [Home](Home) · [Troubleshooting](Troubleshooting) · A French README is in `README.fr.md`.

wiki/_Sidebar.md

@@ -0,0 +1,37 @@
+### OpsLog Wiki
+
+**Start here**
+- [[Home]]
+- [[Installation]]
+- [[Getting Started]]
+
+**Logging**
+- [[Logging Basics]]
+- [[Recent QSOs and Filters]]
+- [[Import and Export ADIF]]
+- [[Profiles and Databases]]
+
+**Radio control (CAT)**
+- [[CAT Control]]
+- [[FlexRadio]]
+- [[Icom]]
+- [[Remote Icom over the Internet]]
+
+**Operating**
+- [[DX Cluster and Spots]]
+- [[Maps and Antennas]]
+- [[Amplifiers and Switches]]
+- [[Audio and Keyers]]
+- [[Contest Logging]]
+- [[Net Control]]
+- [[Multi-Operator Live Status]]
+
+**QSL & Awards**
+- [[Awards]]
+- [[QSL Management]]
+- [[QSL Card Designer]]
+
+**Reference**
+- [[Settings and Data]]
+- [[Security]]
+- [[Troubleshooting]]