chore: release v0.19.2

2026-07-09 16:51:57 +02:00
parent 5ae2bad549
commit 19c2de5f61
37 changed files with 1395 additions and 73 deletions
@@ -0,0 +1,58 @@
+# Troubleshooting
+
+## Where's the log file?
+
+OpsLog writes a diagnostic log. The path is shown in Settings (and can be opened
+from there). When reporting a problem, include the relevant lines — they're
+prefixed by subsystem (`Flex:`, `icom net:`, `icom scope`, `antgenius:`,
+`cluster:`, `qslmgr:log`, `audio:`…).
+
+## CAT
+
+- **Radio not connecting** — check the backend fields (COM port + baud for USB;
+  IP/credentials for network). OpsLog connects non-blocking, so it won't freeze —
+  watch the CAT status.
+- **Icom: no CAT at all over USB** — the CI-V address must match the radio; pick
+  your **model** from the dropdown (it sets the address) and set *CI-V USB Echo
+  Back* **OFF** on the rig.
+- **Icom scope blank on an IC-7300** — this was a bug where the scope decoder was
+  chosen from the configured CI-V address; it now uses the model detected from the
+  CI-V ID, so a single-scope rig run at address `0x98` decodes correctly. Update
+  to the latest build.
+- **Icom attenuator button does nothing** — the dB steps are model-specific; make
+  sure the right model is selected (IC-7300 = 20 dB, IC-7610 = 6/12/18 dB).
+
+## Remote Icom
+
+- **Login rejected** → wrong Network User1 name/password.
+- **Can't bind local port** → the Icom **Remote Utility is still running** —
+  close it.
+- **Link drops with the scope on** → receive-side retransmit should hold it; if
+  not, check network quality and the `icom net:` log lines. See
+  [[Remote Icom over the Internet]].
+
+## FlexRadio
+
+- **A control reads 0 / stale at startup** — some SmartSDR status fields use short
+  names (e.g. the TX filter is reported as `lo`/`hi`, not `filter_low/high`). If a
+  value never populates, capture the `Flex: … status` log line and report it.
+- **Antenna wrong band on a spot click** — fixed: `SetFrequency`/`SetMode` update
+  the slice cache immediately so the panel and the Ultrabeam follow don't chase a
+  stale frequency.
+
+## Multi-op live status PHP
+
+`Connection refused` from the PHP page is almost always MySQL `bind-address =
+127.0.0.1` or a firewall/grant issue — see
+[[Multi-Operator Live Status]].
+
+## DVK / PTT
+
+- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the async
+  OmniRig write is actually sent; if it still doesn't key, the rig's OmniRig
+  profile may not expose CAT TX keying — use RTS/DTR or VOX.
+
+## Still stuck?
+
+Open an issue with: what you did, what happened, your radio/model, and the
+relevant log lines.