rouggy/OpsLog
0
1
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 39 Wiki Activity
358 Commits 1 Branch 39 Tags
1070637c40bc8e46c013f75f11c2c935ca93154d
Commit Graph
51 Commits
Author SHA1 Message Date
rouggy 1070637c40 feat+fix batch: Station Control dashboard (fixed-width panels, grip-handle drag reorder, amp meters from the Flex stream, compact relays), Ultrabeam element list capped to 3 (READ_BANDS over-read), spot-click on Flex panadapter now sets mode, DAX TX toggle, DVK panel state persists across relaunch, duplicate amp meters cleared on power-cycle, QSO audio recording snapshot taken synchronously at log time (was racing the form-clear cancel), Flex COMP meter max -20->-25 and MIC scale to 0; changelog 0.20.10 2026-07-23 01:08:47 +02:00
rouggy 6b04072e52 fix: clicking an OpsLog spot on the Flex panadapter now sets the mode too — cluster spots get a mode inferred (comment/band plan) and SendSpot converts it to a real Flex mode (SSB->USB/LSB, FT8->DIGU), so SmartSDR actually switches mode on the click; changelog 0.20.10 2026-07-22 20:36:29 +02:00
rouggy a9ca50b2dd fix: the Flex panel DAX button now toggles the TRANSMIT-bar DAX (transmit set dax=), not the slice RX DAX channel — this is the button that routes TX audio through DAX (WSJT-X); state follows changes made in SmartSDR too 2026-07-22 20:24:25 +02:00
rouggy 512b5fd35b feat: DAX selector on the Flex panel — routes the active slice's RX audio to a DAX channel (slice dax=0-8, Off..8 dropdown next to the antenna selection, highlighted when active); changelog updated 2026-07-22 17:33:45 +02:00
rouggy b7dd8d4852 feat: multiple amplifiers + SmartSDR v4 DSP filters 
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.

Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
 2026-07-22 17:25:10 +02:00
rouggy 3cef885934 feat: Flex CWX type-ahead backspace (cwx erase) — phase 2 
Completes the CWX type-ahead loop: with send-on-type the keyer-panel CW text
already streams each typed char to the radio's CWX buffer (which keys in order,
so you can keep typing while it sends); this adds the matching un-send. Route
wkBackspace to FlexBackspaceCW -> cwx erase N, so backspacing a mistyped char in
send-on-type removes it from the buffer before the radio keys it.
 2026-07-20 16:12:24 +02:00
rouggy 9729ef62ba feat: FlexRadio CWX CW keyer (send/stop/speed) — no WinKeyer/SmartCAT needed 
Adds a third CW engine alongside WinKeyer and Icom CI-V: FlexRadio's CWX keyer
over the existing SmartSDR CAT connection.

- cat.FlexController: SendCW (cwx send), StopCW (cwx clear); flex.go implements
  them, escaping the quoted text form. Speed reuses SetCWSpeed (cw wpm).
- App bindings FlexSendCW/FlexStopCW/FlexSetKeySpeed via FlexDo.
- Frontend: cwSource gains 'flex'; macros/auto-call/<LOGQSO>/send-on-type route to
  Flex when the CAT backend is a Flex (estimate-based timing like Icom, no busy
  echo). Keyer panel shows 'Flex CWX' + ready/offline; Settings adds the engine
  option with a CAT-backend guard.

Core send/stop/speed first; type-ahead buffer + mid-send backspace (cwx delete)
to follow.
 2026-07-20 15:13:24 +02:00
rouggy 9cc72c7575 fix: OmniRig reads VFO A first (FreqA→Freq fallback), fixing IC-7610 CAT 
The 7610-only FreqA gate broke CAT on the 7610 when FreqA was momentarily 0.
Match DXHunter/WSJT-X: read FreqA first for all rigs, fall back to the generic
Freq (IC-9100 etc.), then FreqB. OmniRig's generic Freq maps to VFO B on the
7610, which is why keying off FreqA is correct.
 2026-07-20 10:11:10 +02:00
rouggy 2166d1aa4b fix: IC-7610 VFO A over OmniRig + faster Icom LAN reconnect 
OmniRig: on the IC-7610 the generic Freq property reports the wrong VFO (its
Main/Sub model confuses the stock ini), so OpsLog showed VFO B. Detect the rig
by RigType and, in simplex, read VFO A explicitly — matching Log4OM. Only the
7610 is affected; other rigs keep using the generic Freq.

Icom network: when the rig tears the session down (control/CI-V 0x05) OpsLog
only logged it and kept the half-dead link until the 6 s liveness timeout
expired. Mark the link dead on 0x05 so Alive() fails on the next poll and the
manager reconnects cleanly right away.
 2026-07-19 17:00:11 +02:00
rouggy 829c236d6c feat: New Station Control, allow to control Webswitch 1216H or KMTronic 2026-07-16 22:01:07 +02:00
rouggy c9fd1379e1 feat: While using Flex & Steppir or Ultrabeam can prevent transmit when antenna is moving 2026-07-16 19:51:25 +02:00
rouggy 3cd80ead81 fix: wrong scale on the PGXL meter 2026-07-15 12:01:12 +02:00
rouggy 9e2ffdb758 feat: Adding XIT RIT in the Flex panel 2026-07-14 23:54:06 +02:00
rouggy 73f3ec51f7 fix: Flex with multiple slices opened was always showing slice A s-meter. 2026-07-10 23:13:06 +02:00
rouggy 6c39204301 chore: release v0.19.4 2026-07-10 17:16:32 +02:00
rouggy 6ab606fa54 fix: Bug showing split for flex while in different mode on same band 2026-07-10 15:59:32 +02:00
rouggy 19c2de5f61 chore: release v0.19.2 2026-07-09 16:51:57 +02:00
rouggy b9079fe4e2 fix: bug where scope is now showing on IC7300 2026-07-09 15:30:24 +02:00
rouggy 521f8266cf feat: added full support in USB (local) & ethernet (local or remote) of audio for Icom 2026-07-09 11:30:06 +02:00
rouggy 1f5e5759cc fix: CAT PTT not working for DVK 2026-07-09 08:18:49 +02:00
rouggy 6db90abcad feat: Management of multiple slices on Flexradio 2026-07-07 19:35:25 +02:00
rouggy ab06673854 feat: added APF for CW in Icom 2026-07-07 17:10:42 +02:00
rouggy 1cadefd207 feat: New buttons for Icom Scope 2026-07-07 16:50:26 +02:00
rouggy 05fbb8a3bc feat: Icom split auto 2026-07-07 15:56:14 +02:00
rouggy 5b37397a64 fix: Save and close taking time when Flex or Icom is not connected 2026-07-07 11:07:16 +02:00
rouggy 7a24282aa4 feat: Implemented scope on Ethernet for Icom 2026-07-07 09:31:53 +02:00
rouggy 701e8a2c25 feat: Implemented Icom Ethernet CAT control 2026-07-06 17:37:25 +02:00
rouggy fafa0c22ab fix: solve issue with Antenna Genius for remote operations 2026-07-05 20:52:37 +02:00
rouggy 4f32012930 feat: Implemented UDP Outbound Adif message, freq to pstrotator 2026-07-05 18:17:30 +02:00
rouggy 8cf53a0aa2 feat: added RIT and XIT for Icom 2026-07-05 13:21:11 +02:00
rouggy dd4b0004a5 feat: icom Scope in Icom Tab 2026-07-04 22:06:26 +02:00
rouggy abbdde9367 feat: CAT Icom working as well as split (IC7610) 2026-07-04 18:43:11 +02:00
rouggy 18438d7737 chore: release v0.16.3 2026-07-04 09:01:55 +02:00
rouggy 8ccad7ca65 feat: spots to panadapter for TCI radio 2026-07-03 15:30:53 +02:00
rouggy 812e4f05e5 feat: TCI implementation for CAT Control of SunSDR 2026-07-03 15:11:32 +02:00
rouggy edede0bc1e fix: zoom taking too long after clicking a spot 2026-06-30 09:14:50 +02:00
rouggy a05dd6b3a9 feat: Added Antenna selection to Flex FlexPanel 
feat: New settings flexradio to select antennas per band
 2026-06-29 23:07:52 +02:00
rouggy 464a1c702c feat: added mute and AGC-T to Flex control 2026-06-27 21:03:13 +02:00
rouggy 6ac9783f7c feat: qrz clickable in cw decoder 2026-06-21 21:57:11 +02:00
rouggy b302d4d87b feat: Support for Antenna Genius 2026-06-21 20:15:30 +02:00
rouggy 0e2ef317c3 feat: Added chat when MySQL is in use 2026-06-21 02:30:01 +02:00
rouggy 4b5e2e0b72 fix: Binding to Gui Client to get proper values for cw delay and pitch 2026-06-20 19:34:10 +02:00
rouggy 95d37da3bb feat: While importing ADIF, update MY fields 2026-06-20 15:48:21 +02:00
rouggy bde1195b34 feat: added FlexRadio support (meters & basic functions) 2026-06-17 18:29:35 +02:00
rouggy 69d0780bac feat: added versionning & About window 2026-06-16 19:36:56 +02:00
rouggy 22e3bb4a18 up 2026-06-15 23:45:14 +02:00
rouggy 8040a37315 up 2026-06-07 02:51:00 +02:00
rouggy 95fdc1ccd1 aduio mail 2026-06-05 02:29:49 +02:00
rouggy a2a29c66d2 feat: added record qso dvk 2026-06-04 00:46:35 +02:00
rouggy 1a425a1b0d bug 2026-06-03 21:53:31 +02:00