The backend already parsed the atu object and exposed ATUStart / ATUBypass /
SetATUMemories through the Flex controller and the App bindings — only the UI
was missing, so the radio's own tuner was the one thing on the panel you still
had to reach SmartSDR for.
Placed under TUNE, which is the order of operations: the tuner needs a carrier
to measure against.
The status is decoded into words rather than shown raw. That is the point of the
block: TUNE_FAIL and "never tuned" leave the radio looking identical on its own
front panel, and the operator transmits into a bad match either way. Failed is
red, tuning amber, tuned green.
The FlexRadio panel, AmpCard and TunerCard each carried their own copy of the
MeterBar (LED-bar) component. Even small drift between the copies made the tuner
meters look slightly off in height/LED size vs the others. Extracted one shared
components/MeterBar.tsx (segments, bar height, padding) and imported it in all
three, so every meter renders at exactly the same size. No behaviour change.
FlexRadio panel refinements from feedback:
- TRANSMIT and RECEIVE now share one collapse state — folding either folds both
(Card gained an optional controlled open/onToggle mode; the parent owns the
shared txrx state, persisted).
- Meter sizes: the Tuner Genius PWR/SWR meters used a 2-column grid (wider than
the Flex/amp meters). Switched to the same grid-cols-2 sm:grid-cols-3 so every
meter across the METERS, AMPLIFIER and TUNER cards is the same width.
- MIC and COMP meters are hidden outside phone modes (shown for SSB/AM/FM only).
- S-meter dBm moved inline next to the S-value (was a second line under the bar),
and the redundant dBm line under PWR removed — keeps only the watts. Saves height.
Addresses three points of feedback on the Tuner Genius work:
- Meter sizes: the amplifier meters were rendered `compact` (smaller than the
FlexRadio meters). Dropped compact so the amp, tuner and Flex meters are all
the same size.
- Collapsible cards: the FlexRadio panel Card, AmpCard and TunerCard now fold
from a chevron in the header, state persisted per card (opslog.cardOpen.*).
The amplifier cards share the "amplifier" collapse key across their SPE/ACOM/
PGXL variants so folding sticks regardless of the shown model.
- TGXL responsiveness: the tuner's device poll dropped 1500ms→400ms and the
three UI pollers 1500ms→500ms, so the SWR/power meters track TX without the
2–3s lag behind the amplifier the user saw.
- Icon: the Tuner Genius top-bar toggle used Zap, same as the CW keyer — changed
the tuner's icon (top bar + widget + card) to Gauge so the two are distinct.
Push the tuner control further so it mirrors the native 4O3A app and the way the
PowerGenius XL is surfaced.
Backend (internal/tunergenius):
- Status now carries both RF channels A and B (source/mode, band, frequency,
bound Flex nickname, per-channel bypass, antenna, PTT), the active channel,
the C1/L/C2 relay-network positions, and the 3-way-vs-SO2R hardware variant
(learned once from the `info` reply). Flat freq/antenna still mirror the active
channel for the compact widget.
- New TunerGeniusActivate(ch) binding → `activate ch=N` (or `ant=N` on 3-way).
Frontend:
- New shared TunerCard, styled exactly like AmpCard (PWR/SWR meter bars,
A/B channel selector with source+freq+antenna, Tune/Bypass/Operate). Used in
BOTH the FlexRadio panel (its own card, like the PGXL) and Station Control.
- Docked TunerGeniusPanel widget now shows the two channels A/B with their
source/frequency/antenna and lets you click to make one active — the missing
A/B state the user flagged.
- i18n EN/FR for the new labels (channels, antenna, in-line/bypassed, title).
Still UNTESTED on hardware — verify the per-channel field names/units and the
activate behaviour on the real box.
The RECEIVE card had grown tall after adding WNB and the SmartSDR v4 DSP rows
(NRL/NRS/NRF/ANFL/RNN/ANFT). Keep the everyday NB/NR/ANF visible and tuck the
supplementary controls behind a collapsible 'DSP' button. The button badges +
highlights when any hidden control is ON so an active filter is never hidden,
and its open/closed state persists in localStorage (opslog.flexDspOpen).
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.
Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
When the configured amplifier is an SPE Expert (not the PowerGenius), the Flex
panel now shows an SPE control card — the Flex doesn't report SPE amps, so it's
driven by OpsLog's own SPE link. The PowerGenius fan-mode control is hidden when
the amp type isn't PowerGenius.
The radio-style Ctrl+left/right RIT shortcut skipped any focused input/textarea
(to preserve word navigation), but that's exactly where the operator's focus is
mid-QSO. Now only the RIT offset row itself is skipped; text-field word nav is
overridden only while RIT is engaged.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
rouggy
