0.25.3 shipped with its two entries — the verified-confirmation fix and the
native SPID rotator — and they are two separate subjects, so there was nothing
to merge this time.
Version constants untouched: the release script owns them, and it already
bumped them to 0.25.3 in the commit before this one.
Same bug as yesterday's, one screen further on. The QSL Info table maps the
statuses it knows — Y, R, I, M — and falls through to "No" for anything else.
ADIF's V is anything else. So a contact confirmed AND validated by LoTW was
reported as not received, in the one place an operator opens to check.
V now has its own label, Verified, in the green of a confirmation, and it is in
the dropdown too. That second half matters more than it looks: a select whose
value is not among its items renders blank, so a verified contact looked like
nothing had been recorded — and the operator's next click would have replaced
the strongest confirmation they hold with whatever they picked instead.
The QSL Manager's bulk list is deliberately left alone: it sets paper QSL
status across a selection and defaults to "leave", so it never displays a
stored value, and "verified" is not something a paper card can be.
An operator with a tower at each end and an AlfaSpid on both wanted OpsLog to
talk to them directly. Multiple rotors were already there; the missing half was
the protocol.
Rot2Prog and Rot1Prog, over the controller's own COM port. The byte layout is
in the package doc and pinned by table tests against Hamlib's spid.c, the
reference implementation — including the one trap this protocol has: digits go
out as ASCII and come back as raw bytes. Send raw and the controller ignores
you; read as ASCII and every heading is wrong by a constant nobody would
recognise as such.
Two things the UI has to get right because they cannot be detected: the dialect
(different reply length AND baud rate) and the baud list, which for a SPID is
600 or 1200 — offering the usual 4800-and-up would have left the controller
permanently mute. Both are handled: picking SPID sets serial transport, 600
baud and Rot2Prog, and the baud dropdown changes to the rates these use.
The connection test reads a status rather than moving anything, so a wrong
dialect shows up there as a reply of the wrong length instead of as an antenna
that behaves oddly an hour later.
Untested against real hardware — I have none. The frames are pinned; the
controller is the only thing that can confirm the rest.
An operator's screenshot had it side by side: the Awards panel showed Morocco
validated on five bands, and the band/mode matrix two inches above showed the
entity as merely worked.
ADIF's QSL_Rcvd enumeration has both Y and V — "received" and "verified" — and
V is what a LoTW download writes for a confirmation the ARRL has validated. The
award engine's isYes accepted "Y" or "V". Everything else in the app compared
against 'Y' alone: the worked-before status grid, the slot statistics, the row
colouring by QSL status, the awards QSO list, the call history badges. So the
confirmations an operator cares most about were the ones that did not count.
Now one definition per side, named so the next reader finds the other:
qso.ConfirmedValues on the Go side, used by the queries themselves, and
isQSLConfirmed in lib/qsl on the frontend, which rowColors and the panels call
instead of testing the letter.
The Go test drives the real query shape against a real database with a 'V' row
— the constant being right is not the point, the queries using it is.
0.25.2 is going out. The version constants are left alone — the release script
is the one source that bumps them, and touching them here would make its
"release commit already exists" check misfire.
Fourteen entries for ten subjects. "UDP" appeared four times and "Motorized
antenna" twice, which is one line per commit rather than one per thing an
operator notices.
The two new outbound services are now one Connections entry, everything that
was made loggable is another, and the antenna's two silences — a lost port and
a controller going its own way — read as the single symptom they produce.
The selector offered 1, 2, 4, 8 and 16 and none of them took: the board stayed
at four relays.
The count is decided in three places — deviceRelayCount in Go, chanCount in the
Station Control panel, relayCountUI in Settings. The new type was added to the
first and the dropdown, and to neither of the others, so the panel resized the
labels from a helper that had never heard of it and fell straight through to
its fixed default. The Go side was right the whole time, which is why the
driver would have been built correctly for a count the operator could not set.
All three now know the type. A test pins the Go side against every count the
dropdown offers, and against the fixed boards, whose hardware decides and which
must keep ignoring the field.
An operator was about to build band→relay mapping into the custom URL rows.
It already exists, and better: relay auto-control has a per-relay "band" rule
driving webswitch, KMTronic, Dingtian, Denkovi and USB boards. It holds state
so a relay is only commanded when its wanted position changed, reads the
boards live before the first apply so it does not re-command one already in
place, and carries per-relay labels. A URL fired on a band change has none of
that, and would have been a second definition of "which antenna on which band"
— the drift that cost us a week on counties.
So the gap was only the hardware: a hand-made switch is none of the five named
types. It is now the sixth, "HTTP relay": an ON URL and an OFF URL, either as
one pattern with {relay} substituted, or one pair per relay. The per-relay
form is the reason it exists — these boxes often have URLs with nothing in
common between channels (…/FF0101 and …/FF0201), which no pattern can express.
Status is remembered rather than read: most have no endpoint worth trusting.
The cost is stated in the code and the panel — after a restart every relay is
re-commanded once, which is harmless on a board with no memory and far better
than assuming an antenna is already selected.
And the Connections panel now says so, exactly where the wrong choice is made:
picking a band change with a URL transport shows a note pointing at Station
Control. The URL transport stays — a lookup pushed to a webhook or a QSO to a
dashboard is an event, not a state, and Station Control has no place for it.
Two answers to "can people debug this when it does not work".
They could not. A custom UDP row logged "sent 18 bytes to 127.0.0.1:12000"
and nothing about the message — which is a template the operator wrote, so
the byte count says nothing about whether the substitution came out as they
meant. The payload is now in the line, with the trigger that fired it, for
custom rows only: an ADIF record or a binary WSJT frame on every QSO would
bury the log rather than fill it.
Worse was the silent case. A template that is a single placeholder the trigger
does not carry — {freq} on a band change — renders empty, sends nothing, and
looked exactly like a row that had never fired. It now says so, throttled per
row, and points at the field list.
And a password in a URL is redacted before it reaches the file. Storing
http://admin:secret@switch/ as typed was a deliberate choice for LAN gear;
writing it into a log that gets sent to whoever is helping is a different
choice, and was never made.
The Settings section is "Connections" rather than "UDP integrations", since it
has not been UDP-only since the URL transport landed. The log prefix stays
"udp:" on purpose — renaming it would orphan every log an operator has already
sent and every note anyone has written against it.
The hard-coded emitters each speak one published format at one fixed moment.
This is the escape hatch, and it exists mainly for antenna switches: they are
driven by a URL, and the band change is the trigger they want.
Four triggers, each carrying its own field set: band change (the RADIO's band,
not the entry form — a switch follows the rig, not what is being typed), QSO
logged, rotator command and callsign lookup. The panel prints the fields the
selected trigger can fill, which is the point of the whole thing: a placeholder
the trigger does not carry renders as nothing, and without the list an operator
writes {freq} on a band change and has no way to learn why the switch never
moved.
Three things the panel cannot show, handled here:
- Escaping. A URL needs every value percent-encoded; a UDP payload must not
be touched. The first portable callsign, F4BPO/P, puts a path separator in
the middle of a query string otherwise — it works on the bench and fails on
the air.
- Blocking. An HTTP call to a switch that is unplugged would otherwise sit
for the operating system's timeout, on the path of a band change. It runs
in the background with a 3 s limit.
- Silence. A switch answering 404 after a firmware update fails exactly like
success looks from here, so the status code is logged, throttled per row.
The rotator trigger hooks the COMMAND rather than the SP/LP buttons, so the
compass and a spot click fire it too, and the path ("SP"/"LP") is passed
through because an azimuth alone cannot say which was taken — 137° is short
path to one station and long to another.
Credentials in a URL are stored as typed. That is the operator's call, on the
grounds that this is LAN gear, and the hint in the panel says so.
"WSJT-X logged QSO (Logger32)" reads as Logger32-only, and it is not: the row
speaks the WSJT-X UDP interface, which several loggers listen on. An operator
running something else would have scrolled past a service that would have
worked for them.
Logger32 stays in the hint as the example it is — it is what this was built
against, and its additional sockets are where most people will point it — and
port 2250 stays as the default, a starting point rather than a rule.
The ADIF datagram reached Logger32's socket and still nothing appeared in its
log. WSJT-X sends TWO messages for every contact — QSO Logged (type 5), the
structured one, and Logged ADIF (type 12) — and receivers differ on which they
read: MacLoggerDX takes the structured one by default and offers the ADIF as
an option. We were sending only the half Logger32 does not use.
Both now go out on that row, in WSJT-X's own order. Nothing double-logs: any
receiver built for WSJT-X already sees both from the real thing.
Type 5 is read positionally, so the field order is pinned by a test against
NetworkMessage.hpp — one field out of place shifts every one after it and the
receiver files nonsense without complaining. QDateTime is Qt's own encoding:
Julian day, milliseconds since midnight, then the time spec, which is sent as
UTC (1) because a spec of 0 would have the receiver re-read the contact in its
own zone. The Julian arithmetic is checked against known values; a day out
there files every QSO on the wrong date.
"sent 1153 bytes to 127.0.0.1:2250" and nothing in Logger32. Both true: the
line the operator screenshotted is titled "Setup additional WSJT/JTDX UDP
sockets", and those receivers take UDP LOGGING PACKETS — the WSJT-X v2
protocol. A bare ADIF record posted to them is dropped without a word.
So there is a new outbound service rather than a change to the existing one:
"WSJT-X logged QSO (Logger32)" sends the same ADIF wrapped in a Logged ADIF
datagram (magic 0xadbccbda, schema 2, type 12), defaulting to port 2250. The
plain-text row stays for JTAlert/GridTracker-style receivers, because the two
really are different wire formats and one row cannot be both.
The id string is "OpsLog", not "WSJT-X": a receiver uses it to tell instances
apart, and impersonating the real thing would make a second WSJT-X
indistinguishable from us.
Tested both ways — the header byte for byte, and a round trip back through our
own ParseWSJT, since that is the same decoding every receiver applies.
Sahara moves to the parchment an operator asked for: page #e6ded0, panels
#f3eee2, toolbars #ded5c4, terracotta #c4501e on the buttons and the focus
ring. Lighter and less saturated than the deep sand it was.
Two silences from one operator's log.
The SteppIR is not blocked — it is being overruled. Every tune is commanded,
acknowledged on the next poll with the frequency asked for, then replaced on
the poll after by a different one: 21075 asked, 21075 confirmed, 21050
reported, again and again, with the operator tuning once more each time. Two
minutes of that reads as a dead link. It now says what it is, once, when the
motors have stopped and the reported frequency is more than 10 kHz from the
commanded one — a controller quantising to its own grid is not a fault, one
sitting somewhere else entirely is.
UDP outbound had no positive signal at all: only failures were logged. When
an operator sets up an ADIF message to a second logger and nothing arrives,
"OpsLog never sent it" and "the other program did not take it" looked exactly
the same from here — and the first is the common case, because a row created
as an inbound ADIF listener instead of an outbound ADIF message matches
nothing and emits nothing. Successful sends are logged with their destination
and service, and a QSO logged with no outbound row says so once a session.
The paper form had one "Via", which since the QSL_VIA split writes
QSL_SENT_VIA. QSL_RCVD_VIA had no way in at all outside the per-QSO editor —
a field with a column, an import and an export, and nothing to fill it.
Each direction now has its own route dropdown, sitting with the status and
date it belongs to: how the card was sent, beside Sent; how it came back,
beside Received. Both apply to the whole selection, which is the shape of the
job — a stack confirmed in one go usually arrived the same way, a bureau
delivery being exactly that, and doing it one QSO at a time in the editor was
the only option before.
Both store the ADIF enumeration (B/D/E), and neither touches QSL_VIA — that
holds the manager's callsign and belongs to the QSO, not to a stack of cards
being confirmed together.
The two columns were already available in the paper list: it renders through
RecentQSOsGrid, which gained them with the field itself.
Two problems from one operator's log, both of them the log's fault.
SteppIR. The last line about it is "status query failed, reconnecting: Port
has been closed" and then nothing — for the rest of the session. The poll loop
does retry every two seconds, but a failed open was a bare `continue`: no line,
ever. And startUltrabeam had three silent ways out — settings unreadable, the
antenna turned off, no port or host configured — so a cleared field and a lost
adapter produced exactly the same evidence, which is none. Both now say what
happened, with the port or host named. Reopen failures are reported three
times and then throttled (a port that is gone stays gone), and the recovery
says how many attempts it took.
FLDIGI. Four hundred "ADIF payload ignored" lines and nothing else legible.
The cause is in the same log: two inbound listeners on the SAME multicast
group and port, 239.255.0.1:2237 — one WSJT (MSHV), one ADIF (FLDIGI). Every
WSJT-X packet is delivered to both, and an FT8 cycle is dozens of decodes
every fifteen seconds; the bursts in the log are exactly 15 s apart. The ADIF
listener now checks for the WSJT-X magic and says so once, with what to do
about it, instead of rejecting each packet in writing. Anything else is
described a few times with its payload and then goes quiet.
An operator waited over a minute and the button never appeared; opening
Settings and pressing Cancel made it appear at once. That is the whole
diagnosis — Cancel was the only thing that re-read the option.
GetChaseNew returned the cached atomic, which exists for the MQTT goroutine
and is false until startup has read the setting. The UI asked while the
database was still opening, was told "off", believed it, and never asked
again. It now reads the setting, like the grid-chasing binding beside it.
The frontend asks again at the two moments this class of race resolves: when
GetStartupStatus returns, and when the first logbook load succeeds — the seam
that already re-reads the connection label for exactly this reason, with a
comment saying so.
The open/closed state was already remembered per machine; it is now in
PORTABLE_KEYS with the other widget toggles, so it travels with data/ like the
rotor and amplifier panels rather than being the one that does not.
Three cuts, all of them removing things nobody could act on.
The frequency column is gone. Clicking the row tunes the rig to it, so the
number was there to be read and never used. It is still carried on the spot —
the click is what needs it — and it is in the row's tooltip. The country takes
the space.
Modes are limited to FT8, FT4, FT2, PSK31 and RTTY. WSPR is the one worth
spelling out: it is a beacon, nobody answers a WSPR transmission, so a "new
entity on WSPR" is a path report and not a station to work — and on a quiet
band it would have been most of the list.
Bands are limited to the operator's own list. PSK Reporter carries every band
its receivers listen on, and a 13 cm decode is not an opportunity for a station
with no 13 cm.
Both tests run before the status lookup and both read a cached map: they throw
away most of the feed, so nothing downstream pays for it. The band list is
re-read when the lists are saved, so ticking a band in Settings applies to the
next decode rather than the next restart — which would have looked like the
filter not working.
Four things from an operator's first look at the panel, and one of them was
mine.
The frequency column showed "—" on every row. pskr.Spot.FreqHz was declared
and documented in one edit and never assigned in the next, so the payload's
"f" was parsed and dropped. A click therefore filled the callsign and left
the rig where it was, which is half the point of the panel. Assigned, with a
test that runs a real payload through and checks the value survives into the
Spot — the field being declared is what made it look done.
A row now carries ONE indication instead of stacking them. A station can be a
new band and a new prefix at once; the row says the first that matters, in the
order that would make an operator leave what they are doing: entity, band,
mode, slot, then prefix, then square. Two badges on one line made the list
unreadable at a glance, which is the only thing it is for.
Each category has a filter chip in the header, in its own colour, remembered
across sessions. A toolbar button shows the panel and a cross closes it — the
same split the Super Check Partial panel uses, where the setting decides
whether the feature exists and the button whether it is on screen.
The panel is wider and the country column gets what is left, which is more
than it was now that a row carries one badge.
An operator's keyer dropdown showed COM1 and COM3 twice, in the order
COM1 COM1 COM3 COM8 COM9 COM4 COM3, with "COM3COM3" as the selected value —
two entries sharing one value both counted as selected.
Not our bug to start with, but ours to absorb. Windows enumerates serial
ports from HARDWARE\DEVICEMAP\SERIALCOMM, which maps a DEVICE PATH to a COM
name, so the same name legitimately appears twice when two devices claim it:
a driver uninstalled without cleaning up after itself, or virtual-port
software. go.bug.st/serial returns one entry per device, faithfully.
Deduplicated and naturally sorted in the one binding every port dropdown in
the app calls, so CAT, rotators, amplifiers and the keyer all get it. COM4
now sits between COM3 and COM8 rather than after COM9, which is how a port
gets overlooked on a machine with a dozen.
A dropped duplicate is logged rather than swallowed: two devices holding one
COM name is also a good reason for one of them to report that port busy, and
that is not something an operator can work out from a list.
PSK Reporter tells you what is actually being decoded in your region, which
is a larger set than what somebody chose to spot: nobody spots the FT8 caller
running ten watts from a rare square.
Almost all of it existed. The MQTT payload already carries frequency, mode,
transmitter and both grids; the watcher already drops any report collected
further than NearKm from the operator, which is exactly the question worth
asking — the station is being heard HERE, not in Japan; and with grid chasing
on the subscription is already every band, filtered at the broker by receiver
square, measured at 0.2 to 1.2 messages a second. This reads messages that
were arriving and being discarded.
"New" is not decided here. Every spot goes through ClusterSpotStatuses, the
same function the DX cluster grid uses and the same cached index, so the two
panels cannot drift apart the way the county columns did. Cost per message is
map lookups behind an option cached in an atomic, because the MQTT goroutine
must never wait on the settings store.
The option is its own, not nested under grid chasing: chasing squares and
chasing entities are different wants, and the feed now has three consumers,
any one of which brings it up and none of which cuts the others loose when it
goes down.
The panel says "digital modes only" in its footer. An empty list has to mean
"nothing new on FT8/FT4/JS8 near you", not "the band is dead" — it will never
show a new entity on CW.
The comment came out "SSB WAC EU WAZ 15 WPX HA5" — the QSO's materialised
award_refs hold both kinds, and I took them all. Those four are what every
reader of the spot derives from the callsign in their head. They spent the
whole 30-character comment saying nothing and buried SOTA HA/KM-018, the one
reference anyone would have acted on.
Computed awards are now filtered out with the same rule the QSO editor uses
(isComputedAwardField), which is why they are the ones it lists on the left
and not in its read-only panel. The field map moves from a ref to state as
well: a ref left the first spot of a session computing before GetAwardDefs
had answered.
Also opens 0.25.2, since 0.25.1 shipped before the spot work, and sets the
default mode list to SSB, CW, FT8, FT4, FT2, RTTY, PSK31, FM. AM and
DIGITALVOICE stay in the catalogue but are no longer selected on a fresh
install. FT2 joins the digital family everywhere its siblings are listed —
report list, RST defaults, Flex power class — so it gets dB reports rather
than the 59 an unknown mode falls back to.
After the mode, which is the order a cluster line is read in:
"CW POTA FR-11553".
Two sources, because the QSO can be at either stage. While it is being typed
the entry panel holds the references as "CODE@REF;CODE@REF"; once logged they
live on the row as the materialised award_refs. The Send Spot window takes the
entry's when there are any and falls back to the last logged QSO — the same
fallback the callsign and frequency defaults already use — and picking a QSO
from the Latest list fills in that QSO's own.
A self-spot is the opposite case and gets its own builder: it announces OUR
station, so it carries MY_POTA_REF and friends. Using the QSO's award
references there would spot us with the park number of the station we just
worked, announcing us from somewhere we are not.
Both cap at the 30 characters a cluster node keeps, and add a reference whole
or not at all — a truncated park number is worse than none, since nobody can
act on it, and it still costs everyone who reads the spot. Only the comment we
BUILD is held to that; what the operator types is their own business.
The K3NG entry added an hour ago is gone. It named one clone among many —
WKmini, home-built Arduinos, unbranded boxes — for hardware that speaks
exactly the same protocol, and it was the only line in the engine list that
picked a boot delay rather than a protocol. An operator with an unlabelled
clone would have had to guess.
The delay is now learnt per port. The first connect finds out by failing the
quick attempt and succeeding on the slow one; that fact is written to a
global setting keyed by the port, and every connect afterwards goes straight
to the slow attempt. Global rather than per profile on purpose: which keyer
is plugged into COM3 belongs to the computer, and switching profiles for a
different rig does not change the keyer on the desk.
Two tests hold the contract from both sides — a slow keyer must be reported
as slow, and a keyer that answers at once must not be, or every K1EL connect
would inherit seconds it never needed.
The operator's keyer is a K3NG — an Arduino running an emulation of the
WinKeyer protocol — which changes the diagnosis and nearly broke it.
Checked against K3NG's own source before anything else, because yesterday's
handshake now FAILS a connect where it used to press on regardless. It is
safe: k3ng_keyer.ino implements admin echo (0x04) and echoes the byte back,
0x13 is a documented no-op, and OPTION_WINKEY_STRICT_HOST_OPEN — on by
default — ignores every byte except 0x00 before host open, so the resync
nulls are dropped harmlessly and the echo probe still gets through.
The real cause is in K3NG's options file, beside the feature itself:
"disabling Automatic Software Reset is highly recommended", and an option
to "discard errant serial port bytes at startup" for when it is not. On an
Arduino, DTR is wired to reset through a capacitor: opening the port reboots
the board into its bootloader. Ours spoke 400 ms later, to a keyer that was
not running yet.
So the retry now waits 2.5 s, which recovers it without an operator pressing
connect twice, and the engine list gains a K3NG entry that skips the doomed
fast attempt altogether. Everything else is identical to a K1EL — same
settings panel, same protocol.
Fifteen entries for seven subjects — the block had "WinKeyer:" twice, "QSL:"
and "QSL designer:" four times between them, "US counties:" three times.
That is one line per commit, which is how it was written, not one line per
thing an operator notices. Merged, in both languages.
An operator's log showed the whole fault in its first line: "connected on
COM3 — no reply — the keyer did not answer Host Open", followed by seven
configuration commands and two calls sent as Morse. Nothing was listening.
Reporting a link as up and then writing to it regardless is the part worth
fixing; the handshake is why it was down.
K1EL's Application Interface Guide gives the sequence, and we did one step
of it. Now all of it:
- DTR on, RTS OFF. K1EL's own init sets DTR_CONTROL_ENABLE with
RTS_CONTROL_DISABLE, and on a serial WinKeyer those lines ARE the power
supply — DTR feeds the 3.3 V regulator, RTS provides the negative rail.
go.bug.st/serial defaults both to true, so we drove RTS high on every
connect without a line of code saying so.
- 400 ms after the lines come up, for a WK1 still booting off DTR.
- Three 0x13 nulls to resync the command parser. A keyer left part-way
through a command by whoever spoke to it last would absorb Host Open as
a parameter — the everyday cause of a silent WinKeyer, and one the
operator can do nothing about from the outside.
- An echo test (0x00 0x04 0x55) before trusting the port at all. This is
the step that answers "is there a keyer here", and connecting now fails
on it, with the byte that came back when something else replied.
The whole handshake is retried once, since the first attempt's nulls are
what clear a confused parser. Tested against a fake port that reproduces
each failure: absent, mid-command, and echoing but versionless.
copyDirContents wrote into a destination it never created, so the first
os.Create returned ENOENT. The caller was written as "ignore os.IsNotExist"
— meant for a design with no pictures at all — and that guard matched the
failed write exactly: nothing was copied, no error surfaced, and validation
two lines later reported "copied design is incomplete: hero photo file
img_… not found" with no way to tell why.
Three fixes, one cause:
- copyDirContents creates its destination;
- the caller stats the source folder instead of pattern-matching an error,
so a genuine copy failure is reported and rolls back both the row and
the folder;
- DuplicateProfile had the same defect in its own form — an INSERT … SELECT
that cloned the template rows and left their photos behind, giving the
new profile designs with no thumbnail and nothing to print. It now copies
row and folder together, per template, since each needs its id first.
A test reproduces the original failure: it fails with the exact ENOENT that
was being swallowed.
QSL_VIA is the manager. QSL_SENT_VIA and QSL_RCVD_VIA are the ADIF "QSL Via"
enumeration — B bureau, D direct, E electronic, M manager (import-only) —
and say how a card travelled. OpsLog had one column for all three:
- the import folded QSL_SENT_VIA into QSL_VIA whenever QSL_VIA was empty,
which is exactly a Log4OM export (it defaults QSL_SENT_VIA to E), so
OE6CLD saw "E" everywhere OpsLog shows the manager;
- QSL_RCVD_VIA was listed in adifPromoted with no column behind it, so it
was not stored, not kept among the extras, and not exported — dropped
outright on import;
- neither was ever written on export, so an import followed by an export
destroyed both;
- and OpsLog polluted the field itself: the QSL Manager panel wrote
"Bureau" / "Direct" / "Electronic", in full words, into QSL_VIA.
Two columns added (migration 0027), carried through the five places a
promoted ADIF field has to touch, with round-trip tests pinning the reported
case. The QSL panel now offers Bureau / Direct / Electronic for each
direction and stores the enumeration; the manager field is labelled as the
manager and holds only that. M is kept when a file gives it and never
written back out.
Existing logs hold a mixture of the two in one column. The repair is offered,
not performed: the count is shown once per log with a plain question, and a
"no" is remembered. It moves only where QSL_SENT_VIA is still empty, and only
values that normalise to the enumeration — a manager is a callsign and can
never be one of those six words, which a test pins against real manager calls.
An operator asked why K1SEI showed "Middlesex" in Info (F2) and "Lower
Connecticut River Valley" in the cluster. Two sources: the entry panel has
a callbook answer, a spot carries only a callsign so the cluster derives one
from the FCC licence ZIP through GeoNames — and GeoNames has followed the
Census in replacing Connecticut's counties with the 2022 planning regions.
No award, callbook or log uses those, so every CT station matched nothing:
new county for ever, and counting toward nothing.
Measured against a full ULS import (1 556 444 US callsigns), 23 223 resolved
to a name the USA-CA reference does not contain. Three causes, three fixes:
- Spelling. "City and County of San Francisco", "Baltimore (city)",
"Nome (CA)", plus counties renamed since the award list was drawn
(Kusilvak, Oglala Lakota, the Valdez-Cordova split) and Alaska's four
"X City and Borough", whose reference codes read "JUNEAUCITYAND" because
the county-type suffix strip eats the wrong end. Normalised in
award.USCountyKey, which both sides already go through. 7 515 callsigns,
no re-download needed.
- Doña Ana, NM shipped into the reference as "NM/DO̱AANA" — mangled by a
non-UTF-8 CSV line, a code nothing could ever produce, so that county was
unwinnable and silent about it. Row repaired, cntygen now refuses such a
line, and a test makes every one of the 3 102 references reproduce its own
code from its own name.
- Connecticut. A planning region is drawn from towns in several counties, so
no name maps to a name — only the ZIP can resolve it. cmd/ctzipgen builds
the table from the Census 2020 crosswalk, filling PO-box-only ZIPs from the
nearest resolved centroid; all 11 ZIPs GeoNames still labels with a real
county agree with the result. 15 037 callsigns, applied at import, so the
store now carries a rules version and Settings says when a re-download is
needed.
Alignment itself is the last piece: a spot now shows the county the station is
logged with when we have one, and falls back to the ZIP-derived county only for
stations never worked.
The sampled colours were Warm light's own (#faf6ea / #e8dfc9 / #ddd2b8) —
the annotated screenshot was that theme, and the request written on it was
"just a little darker". Keep the cream on panels and the entry strip, take
the page, tab bar, toolbars and table headers a shade deeper, and move the
accent from burnt orange to ochre so the two are told apart in the picker.
Built from the three sands an operator sent: #faf6eb for panels, #e8dfca
for the page behind them, #ddd2ba for toolbars, table headers and rows.
The ordering is what makes it work — a panel reads as lifted off the page
and the log grid as settled into it, so rows stay scannable without extra
rules. Ink is a deep warm brown; pure black on sand glares.
A second profile is usually the same operator with a different rig or a
different locator — same callsign, same cards. Having to redraw a design
because the antenna changed is work nobody should do.
The designer now lists the designs the active profile cannot see and copies a
chosen one into it. Designs it already sees — its own, and the shared ones —
are left out: they are not something to copy.
A COPY, not a move or a share. The original profile keeps its design untouched
and the duplicate is free to diverge, which it usually will: a second profile
exists because something differs, and that something often ends up on the card.
The PICTURES are copied too, and that is the part worth getting right. Stored
documents reference photos by name relative to the template's own asset folder,
so duplicating the JSON alone would point the new design at files that are not
in its folder. It is validated against its own folder afterwards, and a failure
rolls the row back rather than leaving a design whose pictures are missing.
Sharing the source's folder was the other option and a worse one: deleting
either design would then have emptied the other.
From a user's log, repeating throughout the session:
rigctld: split off failed: cat: this radio's backend cannot set split
rigctld: unimplemented command "X PKTUSB -1"
Both are answered with an error, and JTDX treats a rig-control error as fatal:
it abandoned a transmission 0.86 seconds into a 13.8-second frame.
"S 0" — split OFF. Fake It uses no split, and JTDX still sends this to be sure.
A backend that cannot SET split was refusing a request that was ALREADY
satisfied. It now succeeds when the rig is simplex, without touching the rig at
all. Arming still fails loudly: there the request is real and unmet, and a
client that believes it transmits up the band while the radio sits on the DX's
frequency is exactly what that refusal exists to prevent.
"X <mode>" — set_split_mode. Sent during ordinary setup, Fake It included,
where there is no second VFO to give a mode to. Accepted now: applied when a
split is in force, and a plain success otherwise, because the transmit VFO
already has that mode — it is the same VFO. get_split_mode answers to match.
Both regressions fail without the fix with the exact codes from that log,
RPRT -9 and RPRT -11.
Only PTT transitions were recorded. So when JTDX aborted a transmission
0.86 seconds into a 13.8-second frame, the log showed the abort and the Fake It
frequency restore around it — and not the command that preceded them, which is
the one thing needed to tell whether OpsLog answered something the client could
not accept.
Behind the existing CAT wire-trace switch rather than a new one: this is a line
per poll and would drown an ordinary log, and an operator chasing a rig-control
fault turns that trace on already.
The first version was a single switch meaning "command them all", and that is
wrong the moment a station has three: two SPE on a combiner and a PowerGenius
on another antenna would all go into OPERATE together, keying an amplifier that
has nothing to do with the pair.
It is now a set. Each amplifier is ticked into the group or not, the group is
stored as a list of ids, and an amplifier outside it keeps its own buttons —
which is the entire point of it being a set.
A group of fewer than two members is stored as none: one amplifier coupled to
itself would make every command fan out to a single member for ever.
A remembered member that is no longer running is skipped rather than failing
the command — deleting one amplifier must not break the button on the other.
An amplifier saved without an id cannot join, and the panel says so instead of
quietly omitting it from the list.
It sat above the first amplifier card. With three cards configured — the case
it exists for — that is a scroll away from anything the operator is looking at,
and it was reported as missing rather than misplaced.
Moved next to Add amplifier: coupling belongs to the SET of amplifiers, not to
any one of them, so it belongs with the other set-level control.
The SPE CO1-2 combiner is an RF device: it sums two amplifiers and commands
nothing. So "combined" operation is really two amplifiers that must be held in
the same state, and one left in STANDBY while the other keys means the combiner
sees power on a single input.
A switch in Settings → Amplifier makes ON, OFF and OPERATE act on every
configured amplifier. Offered only with two or more: coupling one amplifier to
itself is a switch that cannot do anything.
The METERS stay per amplifier, deliberately. Two amps combined are still two
amps, and an operator watching for one of them to run away needs to see them
apart — a summed bar would hide exactly the fault worth catching.
Fanned out in AmpOperate/AmpPower rather than in the UI: the card and the docked
widget both call these, and a coupling built into one would be missing from the
other, which on a combiner means one amplifier keyed and one not. The clicked
amplifier goes first, so a partial failure still did what the operator asked
before it stopped.
While linked, an amplifier with no power command — a PGXL on its direct link —
is skipped silently rather than reported: it would make a successful pair look
broken.
RI1FJL/MM resolved to Franz Josef Land while the expedition was still sailing
there, telling the operator they had worked an entity they had not.
The old behaviour was deliberate — the comment read "strict DXCC says no
entity, but the log should still show the operator's country" — and that is
wrong for exactly this reason. A home country on a maritime mobile is not extra
information; it is a false claim about where the contact happened, and it is
the kind of false claim that gets a QSO submitted for an award it cannot win.
Trailing only. A LEADING "MM" is the Scotland prefix and "AM" is Spain, so
MM0ABC and AM5X keep their entities — getting that wrong would be a far larger
error than the one being fixed. /P, /M and /B are unaffected: a portable
station is still ashore.
In the cluster the column says "Maritime mobile — no DXCC" rather than going
blank, because blank is what an UNRESOLVED spot looks like and the two mean
opposite things — one is "we don't know yet", this is "there is nothing to
know". Display only: the QSO's own Country stays empty, since that field holds
a DXCC entity name and there is none.
ADIF defines CNTY as "STATE,COUNTY" — "GA,BARROW". OpsLog wrote the bare county
name, which a receiving logger cannot resolve: county names repeat across
states, and there is a Washington County in thirty of them. The award engine
here was never affected, since it reads the columns rather than the ADIF; the
damage was to every file we hand to someone else.
One writer covers everything — writeRecord — so this fixes file exports and the
LoTW, Club Log, HRDLog and QRZ uploads together. MY_CNTY gets the same
treatment.
The county alone is still written when no state is known: a bare name is worth
more than nothing, and inventing a prefix would be worse than either. A value
that already carries a comma passes through untouched, so re-exporting an
imported record cannot double the prefix.
Import is the mirror: "GA,BARROW" fills both columns, and a file carrying the
bare county — as OpsLog's own older exports do — still imports unchanged. The
state parsed out of CNTY only fills a blank STATE, never overrides it: STATE is
the dedicated field and the more specific statement.
"An existing connection was forcibly closed by the remote host" during DATA
reads the same whether the server refused the SIZE, hit an hourly quota, or
simply dropped the socket — and only the first is something an operator can act
on. The message now carries host:port, the encryption in use and the total
attachment size, so the size can be ruled in or out without a second attempt.
A path that does not exist is not counted: the mail library skips it, so
reporting it would describe a message that was never sent.
Puts "F4BPO is on air 14,074,000 FT8 IC-7300" on hrdlog.net's front page while
the station is operating, which is what HRDLog's own "Automatic HRDLog ON AIR"
setting does.
The endpoint and its field names come from HRDLog's own library
(github.com/iw1qlh/HRDLOG-net-library, HrdProtocol.SendOnAirAsync): OnAir.aspx,
with Frequency in Hz, Mode, Radio, Callsign, Code and App. Read rather than
guessed — an invented endpoint would have produced a switch that silently did
nothing.
HTTPS where that library uses plain HTTP: the upload code is a credential and
has no business crossing the network in clear, and the sibling NewEntry
endpoint on the same host already serves TLS.
A heartbeat every two minutes, not a change notification — HRDLog drops a
station from the list when it stops hearing from it. Silent when switched off,
unconfigured, or when the rig reports no frequency: announcing 0 Hz would say
the operator is on air on nothing. Failures are logged, never toasted; a
broadcast the operator did not ask for at that instant must not interrupt them
every two minutes on a flaky link.
Its own switch beside auto-upload rather than folded into it: this is a live
status and needs the rig readable, not a QSO.
compactH was 158px, "tuned so the compact entry strip fits in a single row".
A constant tuned against a layout stops being true the moment the layout
changes, and this one outlived a strip that had since shrunk — leaving about
70px of empty window under the fields.
The frontend now measures what it rendered and asks for that height, watched by
a ResizeObserver so a strip that wraps at a narrow width is followed too. The
topbar is added as its declared h-8 rather than measured, since it is fixed.
Bounded in the backend: a measurement of zero — a layout not yet painted —
must not collapse the window, and the call is ignored unless compact is on so
nothing can shrink the normal window. Rounded to whole pixels so a sub-pixel
reflow cannot start a resize loop.
It went under the Station Control rotator; the compass that wanted it is the
docked one beside the entry strip. Both are the same RotorCompass, so the
readout moves INTO that component: every compass in the app carries it, and no
caller draws its own.
The bezel already showed the short path as a red marker, but a marker is a
direction, not a number — and the numbers in the status bar are 10px, which is
what prompted this.
Clickable only when the caller passed onGoto, since a compass rendered without
one cannot turn anything and a button that does nothing is worse than a label.
rouggy