Sub-option of "back up on every exit": when on, backup.Run/RunADIF stamp the
filename with the time (opslog-YYYY-MM-DD-HHMMSS.db) so each run is a distinct
file instead of overwriting the day's snapshot. Rotation still trims to the
newest N (raise Rotation for a longer history). Threaded as a `unique` flag
through runConfiguredBackup/backupLogADIF from BackupSettings.KeepAll
(keyBackupKeepAll); UI sub-checkbox shown only when EveryExit is on.
Received flag: new APP_OPSLOG_QSL_RCVD extra, toggled on the QSO edit window
next to QSL Message (immediate targeted write via SetOpsLogQSLReceived so it sets
AND clears reliably), plus a live PSE QSL / TNX indicator and a Recent-QSOs
column mirroring the sent one.
PSE/TNX card stamp: automatic — received → TNX, otherwise PSE QSL — exposed as
the {qso.pse_tnx} token (added to qslVars, so preview and send agree) and placed
in the default QSO-box footer; it can be moved to its own element in the designer.
Default QSL message: new qsl.default_message (QSLEmailTemplates.DefaultMessage),
edited under Settings → E-mail → QSL card e-mail. qslVars falls back to it when
the QSO's own QSLMSG is empty, so a per-QSO message always wins. Single choke
point covers both live preview and send.
New BackupSettings.EveryExit (keyBackupEveryExit) with a Settings → Backup
checkbox. When on, the three shutdown-backup gates (plannedShutdownSteps,
runBackupForShutdown, maybeShutdownBackup) bypass the HasBackupToday /
HasADIFBackupToday "already done today" check and always run, so a second
session's QSOs are captured instead of skipped until the next day. The dated
backup file for today is refreshed (overwritten) each exit; prior days are still
kept by rotation.
The recording e-mail's subject and body round-tripped through EmailSettings and
the backend (keyEmailSubject/keyEmailBody) but had no UI editor — only the QSL
card e-mail did, so the recording mail was stuck on the default text. Add the
same subject/body editor to the E-mail panel, above the QSL block, sharing the
{CALL}/{DATE}/{BAND}/{MODE}/{MYCALL} template variables.
The Row helper was defined inside AwardsSelectionPanel, so each render minted a
new component type and React remounted the whole list on every click — flicker,
and clicks lost between mousedown and click (hence needing many tries). Inline
the row markup so the keyed buttons keep a stable identity.
New per-profile "tracked awards" selection: Settings → Awards (under User
configuration) is a two-column transfer list — every defined award on the left,
the ones you follow on the right, click to move either way. The Awards tab's
list is narrowed to the followed set; an empty set means "show them all" so the
tab is never blank.
Backend: app_awards_tracked.go adds keyAwardsTracked (per-profile JSON array of
award codes) with GetTrackedAwards/SaveTrackedAwards; saving emits
awards:tracked-changed so the Awards tab re-filters live. Award definitions stay
global — only the follow selection is per profile.
A contiguous FreqMin/FreqMax range can't drop a single band while keeping its
neighbours — so it couldn't express "40 m and 20 m yes, 30 m no" for an antenna
whose 30 m extension isn't fitted. Replace it with a Covered bands selector
(40 m–6 m) that applies to both the Ultrabeam and the SteppIR.
The follow loop and immediate re-tune now gate on band membership
(motorBandAllowed) instead of a MHz range: only bands in the operator's set are
followed, and 80 m/160 m are never followed (outside a beam's reach) regardless.
The legacy FreqMin/FreqMax is migrated to a band set on load and still
round-trips, so existing configs are unchanged. UI swaps the two number inputs
for a row of toggle chips.
The follow logic skips out-of-range frequencies only when it knows BOTH edges
of the antenna's range. The Ultrabeam path took those edges from the
controller's status frame, but an RCU-01 behind an RS232-to-Ethernet bridge
answers with the short frame that omits FreqMax → the guard saw FreqMax==0 and
disabled itself → OpsLog forwarded every rig frequency, so 80 m (un-tunable)
reached the controller, which clamped the elements down to its lowest band
(~30 m).
ubAdapter now carries the operator-configured FreqMin/FreqMax from Settings →
Antenna (like steppirAdapter already did) and uses them as a hard floor/ceiling,
falling back to the controller-reported bound only when one is left unset. This
guarantees both bounds are present so the guard actually engages. The Tunable
range editor in the Antenna panel, previously SteppIR-only, is now shown for the
Ultrabeam too, with a generic bilingual hint.
New internal/rotator/dcu1 client speaking the DCU-1 command set (AP1nnn / AM1
to go-to, AI1 to read bearing), over a serial COM port (4800 baud default) or a
raw TCP serial-over-IP bridge. Azimuth-only; Stop re-commands the current
bearing since the base set has no stop opcode.
Wired through app.go (normRotorType, default port 4001, GoTo/Heading/Stop/test
switches, park returns the same "PstRotator only" note as ARCO) and exposed in
the rotor settings as "Hy-Gain DCU-1 (RotorCard DXA, Rotor-EZ, Green Heron)"
with the ARCO's serial/TCP transport chooser and a bilingual hint. Protocol is
implemented from the standard DCU-1 spec and still needs field confirmation
against a real RotorCard DXA.
New DX Cluster setting (Settings → DX Cluster). Off (today's behaviour) a call
worked anywhere reads as already worked; on, the WORKED-call flag needs the same
band AND mode. It folds through the digital-mode grouping (Settings → General):
grouped, a 20m FT8 contact also marks a 20m FT4 spot worked; ungrouped they are
separate slots. Backend: qso.WorkedCallSlotKeys builds CALL|band and
CALL|band|mode(grouped) keys; ClusterSpotStatuses uses them when the option is on
(a spot with no inferable mode falls back to same-band).
Removed the long explanatory hints under the Kenwood COM/baud/host, data-mode,
CAT-trace and PTT-hotkey fields; shortened the CAT-sharing hint to just the
client setup line; and replaced the DTR/RTS hint with a one-liner. Less clutter
in the CAT settings.
No single Kenwood mode digit fits every rig for a data mode: a K3/K4 wants
DATA (MD6), a TS-590SG/TS-990S data mode is a USB modifier set on the rig,
and MD6 on a plain Kenwood is FSK/RTTY. So the operator now chooses in
Settings → CAT: USB (default), DATA (MD6), or leave the rig's mode unchanged.
Only soundcard/data modes (FT8, PSK, JT…) follow this; RTTY/FSK stays its own
native mode, and voice/CW are untouched (isKenwoodDataMode + test).
- PGXL: remote AUTH password; direct-link meter fallback (VITA-first) with
250 ms poll + peak-hold; fan mode uses bare "fanmode=" (was ignored).
- TCI: spot colour sent as decimal ARGB (ExpertSDR dropped the hex string);
spot click handled via CLICKED_ON_SPOT / RX_CLICKED_ON_SPOT to fill the entry.
- FlexRadio: clicking an OpsLog spot on the panadapter now applies the mode too.
- Filter presets: the trash icon deletes again (Radix pointer-down intercept).
- PTT hotkey: keys over CAT when a backend is active (was hijacked by a stale
Audio-tab RTS/DTR serial setting); AltGr keys allowed; presses logged.
- CW macro <LOGQSO>: logs after the preceding CW is sent, not on the first letter.
Settings -> Rotator is now a list like the amplifiers: add/remove rotors,
mix PstRotator / Rotator Genius / ARCO, and a Rotator Genius can drive both
its ports (one entry = two rotors). The compass gains a rotor selector, and
a per-rotor motorized-antenna flag so the boom/pattern paths show only for
the rotor carrying the Ultrabeam/SteppIR.
Also in this batch: a keyboard PTT hotkey (hold-to-talk or toggle, reusing
the audio PTT method with a CAT fallback), and TCI spot push to the
panadapter with click-to-fill of the callsign.
The 0.22.7/0.22.8 breakage came from a Xiegu-reported fault being fixed
inside the Yaesu and Kenwood backends. The lesson is structural: nothing
a backend does may be steered by another backend's report or another
backend's setting.
The lower-lines checkbox introduced for 0.22.9 was still one shared key
applied to both Yaesu and Kenwood — the same reflex in miniature. It is
now cat.yaesu.low_dtr_rts and cat.kenwood.low_dtr_rts, each checkbox in
its backend's own settings block, each wired only to its backend. The
shared key never shipped, so nothing needs migrating.
Both defaults break someone. 0.22.7 lowered the lines on Yaesu and
Kenwood and silenced a TS-990 whose interface needs RTS raised to
transmit; 0.22.8 stopped lowering them and an FT8 station reported its
output power wandering, cured by closing OpsLog — Windows raises both on
open and the interface reads one as PTT.
So it is now a checkbox on those two backends, off by default: that is
how they behaved before any of this. Xiegu keeps lowering them
unconditionally (its own report, its own explicit keying setting), and
the CI-V backend keeps the behaviour it has always had.
Reported on a Xiegu G90. With the blue programming cable — three wires, no
modem lines — CAT works perfectly. Behind a DE-19, which carries audio, CAT and
PTT, the radio went into transmit the moment OpsLog connected and stayed there.
Windows raises DTR and RTS when a serial port is opened, and the DE-19 reads
them as PTT; Xiegu's own documentation asks for both low. The CI-V backend has
dropped them since it was written, for the same reason on Icom rigs with USB
SEND mapped to a line. Xiegu, Yaesu and Kenwood did not. They do now.
The second half of the report: WSJT-X through OpsLog's rigctld decoded fine and
never transmitted. Nothing was broken in that chain — set_ptt reaches the
backend, which sends the CI-V PTT command, which a G90 ignores. That is why
Xiegu keys on a hardware line instead. The backend can now do that: Settings →
CAT → Xiegu → how the rig is keyed (CI-V / RTS / DTR).
Untested here — no G90 in reach. The operator who reported it offered to try.
A panadapter shot settles it: answering an S5 station, the replayed recording
goes out several times wider and taller than the station being answered — in WAV
as well as MP3, so this is not the encoder.
One setting served two sources that have nothing in common. A voice-keyer
message is a microphone at speaking distance and legitimately wants 195%; a QSO
recording is a receiver's line output, which is far hotter. The same 195% put it
into the transmitter flat out, ALC pinned, noise and voice alike.
The QSO playback now has its own level, defaulting to 100%. The voice keyer
keeps the setting it had, so nobody's F-key messages change.
Reported again after the monitor was wired up: 300% still sounded like 10%. The
monitor fix was right but could not show, because the sliders only changed the
settings panel's own state — the value reached the audio engine when the
operator clicked Save.
A level is set by ear, by dragging. It now applies on every move, to the monitor
and to the recorder mix alike; saving still persists it. Both halves were needed
and neither works alone.
The rule between the band-driven columns and the mode-driven ones was an extra
empty cell added to the body rows only. Seven cells per row against six in the
header slid every heading across: Phone stood over the TX antenna, CW over
Phone.
The rule is now drawn on the first power cell itself, in the header and the body
alike, so the two cannot drift apart again.
Antennas and power were two tables listing the same bands, one under the other,
so configuring a band meant matching rows by eye between them.
They are now one row per band. That the two settings are stored separately and
applied on different triggers — antennas on band change, power on band or mode
change — is a backend detail, and no reason to split what is a single decision
per band for the person configuring it. A rule in the header keeps the two
groups readable.
Settings → FlexRadio, beside the per-band antennas and applied the same way:
when the band or the mode changes. 1.5 kW that is fine on SSB has no business
going into an FT8 signal on the same band.
Three classes rather than one row per mode, because what decides the power is
duty cycle and what the amplifier will take of it, not the mode's name — FT8 and
RTTY punish an amplifier the same way, SSB and AM do not. The classification is
pinned by a test: a digital mode sorted as phone would deliver exactly the
1.5 kW this exists to prevent.
An empty box means "leave the power alone", never zero watts, and an unknown
mode changes nothing — setting a transmit power from a name we do not recognise
is not a good guess.
Unlike the antennas, a locked band does not skip it: the lock means "do not let
the rig drag my log entry around", not "let the amplifier keep whatever the last
mode left".
Settings → General, beside the language. An operator reading 2026-07-30 as the
7th of the 30th month is reading their own log wrongly, and that is a display
problem.
Storage stays ISO/ADIF, deliberately and permanently: it is what ADIF
specifies, it sorts correctly as text, and a stored format that followed a UI
preference would make the log unreadable the day the preference changed. Exports
and uploads are untouched.
Two details that decide whether it actually works:
- The columns are rebuilt when the format changes. The formatters are captured
inside AG-Grid's column definitions, so nothing else would notice and the
table would keep the old format until something forced a rebuild.
- main.tsx re-reads the choice after the portable prefs are pulled from the
database. The module reads localStorage at import time, which is BEFORE that
sync — so a copied data/ folder would have shown ISO until the next launch.
UTC is not part of the choice and never will be: a logbook is kept in UTC, and
showing local time would make the display disagree with the QSO's own record
twice a year.
It applies to QRZ.com and Club Log both, but it was rendered after the tab
strip — so it read as a QRZ setting when the QRZ tab was open, appeared to
repeat itself on the Club Log tab, and was invisible to anyone opening a third
one.
Above the tabs it belongs to the panel, which is what it actually is.
Opt-in, off by default: neither service can undo it, and a local delete is not
always a statement about the world — a duplicate cleared out of a contest log
was never meant to change the DX's log.
The two APIs are not alike, and the difference decides what is possible:
- Club Log deletes by MATCH (callsign, exact timestamp, band number), so it
works for every QSO in the log, past or future. The band table is its own
list and is pinned by a test: a band mapped to the wrong number does not
fail, it points the delete at a different QSO.
- QRZ.com deletes ONLY by logid. So markExtUploaded now stores the LOGID it
already received on every upload — it was being logged and thrown away. A
QSO uploaded before this cannot be withdrawn from here at all, and the log
says so by name rather than leaving the operator to assume it worked.
Both run BEFORE the local delete, because both need the QSO's own fields to
find their copy and there is nothing left to ask with once the row is gone.
Neither can block it: the operator asked for the QSO to go, and a refusing
website is not a reason to keep it.
The same ASCII stream over a socket instead of a wire: ser2net, an
Ethernet-serial adapter, a Raspberry Pi at the radio. One TCP transport
presented as a serial port, so the backend keeps a single code path.
Explicitly NOT the radio's own RJ45. A TS-890 or TS-990 speaks Kenwood's
KNS/ARCP there — session, authentication, a different protocol — and that needs
one of those radios in hand to write honestly. The setting's help text says so,
because an operator who plugs in their TS-890's Ethernet port and types its
address deserves to learn that from the interface rather than from silence.
Two details that decide whether this is usable or maddening:
- A read deadline expiring is reported as "no data yet", not as an error. It
is exactly what a serial read timeout means to the caller; as an error it
would make ask() abandon a rig that is merely thinking.
- The log line names what was connected to. "connected on @ 0 baud" after a
network connect sends someone hunting a serial fault that does not exist.
The host wins over the COM port when both are filled: it is the more deliberate
setting, and silently preferring the wire leaves someone staring at an address
they typed and a radio that never answers.
Grey line — the day/night terminator and its twilight band, off by default,
redrawn every minute so a map left open all day is not silently wrong by
evening. Its own Leaflet pane below the overlays, non-interactive, so it never
hides the path or beam nor swallows a click.
The solar maths is pure and was checked against known positions before being
wired to anything: both solstices, the March equinox, the subsolar longitude at
12 UTC, and day/night at Paris, Tokyo, New York, Sydney and Reykjavik across
seasons and hemispheres. That last set is what caught the real bug: the equation
has TWO solutions per meridian and the naive branch put New York in daylight at
02:00 in December — the terminator at +63° where it belongs at −63°. A shaded
map that looks entirely plausible and is exactly mirrored. It now anchors on the
classical terminator and takes the branch nearest it, which is also what makes
the twilight band follow the terminator instead of jumping hemisphere.
Separately, from a Xiegu user: the protocol-trace checkbox does not stay ticked.
It is React state initialised to false on every mount, so a trace still running
came back unticked — the operator ticks it to "switch it on", which switches it
OFF, and the log they send contains no trace at all. Worse than a cosmetic bug:
it silently defeats the one tool asked for to diagnose their radio. Both boxes
(CAT and WinKeyer) now read their real state from the backend.
Reported from a Flex in Kenwood CAT mode: frequency read perfectly, split never
appeared. Not every rig speaking this dialect fills IF's split bit.
Rather than guess which column that firmware populates, ask the question that
DEFINES split — is the transmit VFO a different VFO from the receive one — which
is exactly what FR and FT answer, and the same rule the Yaesu backend settled on
after several wrong turns. FR is also trusted over IF for which VFO is in use:
they are asked in the same breath, and a rig vague about the split bit may be
just as vague about the VFO field.
Cost is bounded: a rig that rejects FR/FT answers "?;" once and is never asked
again, so this is two short commands per poll only where it works. Both paths
are tested against the emulator — split found through FR/FT with IF silent, and
IF-reported split still working on a rig that refuses FR/FT without re-asking.
Also extends the CAT wire trace to the Kenwood backend, ASCII quoted so an empty
reply is visible as such: "" and ";" look identical unquoted, and telling them
apart is the whole question when a rig half-supports a command. If this fix is
not the whole story on real hardware, the trace is what will say so.
Reported on an IC-9100: the MOX button does not transmit, it sets split. The
source sends the PTT command (0x1C 0x00) and nowhere sends the split one (0x0F),
so the discrepancy is between what OpsLog sends and what the rig acts on — and
that link has already been shown, in the same operator's log, to lose frame sync.
Rather than guess from the command table, this adds what settled the WinKeyer
bug in one line: the actual bytes. Settings → CAT → Log the CI-V protocol writes
every frame in both directions as hex. RX is traced BEFORE framing, since the
bytes as they arrived are what reveals a lost boundary — a decoded view would
hide exactly the fault being hunted.
Session-only, like the keyer trace: it is a diagnostic, and a log full of hex
helps nobody who forgot it was on.
I am not claiming a cause yet. The last time I inferred one from a protocol
document rather than from evidence, I inverted a digit and broke the case that
worked.
A sixth CAT backend, talking to a TS-590/890/990/2000 over its serial port with
no OmniRig in between — frequency, mode, VFO, split and PTT. Elecraft K3/K4 and
the "Kenwood" setting on other radios speak the same dialect.
The protocol was not researched from scratch: internal/catemu already ANSWERS
these commands, pretending to be a TS-2000 so an ACOM amplifier follows OpsLog.
The IF frame layout here is read from the same format string catemu emits, so
the two halves of the repository agree by construction — and the test caught my
own fixture being one character short, which is exactly the error that layout
invites.
Design notes worth keeping:
- IF; is the poll. One frame carries frequency, TX state, mode, VFO and split,
so simplex operation costs a single round trip; the other VFO is only asked
for when split is actually on.
- FA/FB take ELEVEN digits here where Yaesu uses nine. That is the likeliest
place to copy the Yaesu backend and be wrong by a factor of a hundred, so it
has its own test.
- Every lesson the Yaesu backend learned the hard way is built in from the
start: replies matched to the command that asked, "?;" remembered so a poll
stops paying a timeout for an unsupported command, the serial handle closed
before reopening, and a rig that answers nothing reported as absent rather
than "connected".
Untested on hardware — I have no Kenwood here. The frame parsing is covered by
tests against catemu's own format.
An ERC (Easy Rotor Control, incl. ERC Mini) emulates Yaesu GS-232A/B, which is
exactly what the backend written for the microHAM ARCO already speaks — azimuth
out (Maaa), azimuth in (C), stop (S), which is the whole of what was asked for.
So this is two small gaps rather than a new backend:
- Serial speed was hardcoded to 9600. An ARCO's virtual COM ignores it, but an
ERC runs at whatever its own configuration sets, and a mismatch reads as a
dead rotator. It is now selectable beside the COM port.
- The entry was called "microHAM ARCO", so an ERC owner would never have found
it. It is named after the PROTOCOL now: "GS-232A controller (microHAM ARCO,
ERC…)".
The help text states the condition plainly in both languages, because it is the
one thing that will otherwise waste an evening: an ERC left on Hy-Gain DCU-1
speaks a different command set and simply will not answer.
Untested on hardware — I have no ERC here, and the GS-232 path itself is proven
on a real ARCO.
Spotted by the author: on SQLite the database chip showed a.dbPath — the
settings/profile database — under a tooltip reading "Local SQLite logbook".
Those became two separate files when the logbook was split out, so an operator
checking where their QSOs live, or which file to copy before a trip, was pointed
at the wrong one. MySQL was already right.
It now resolves the logbook the same way connectLogbook does: the active
profile's own file if it names one, then the default logbook.db, and the settings
db only in the case where it genuinely doubles as the logbook.
Also moves the 4O3A mark beside its menu label instead of the far edge of the
row, as asked.
The wordmark I put there was not what the author expected: the brand is "4", a
green waveform of stacked lenses, then "3A".
Only the waveform is SVG. The digits stay HTML text so they keep the sidebar's
own typeface at any theme or zoom — an SVG <text> would pick its own font and
drift from the menu around it. Seven ellipses, tallest in the middle, match the
shape of the mark.
Still drawn rather than fetched: an image off the web has no verifiable
provenance, and this stays one small component to swap if the official SVG is
preferred.
Antenna Genius and Tuner Genius now carry a small 4O3A wordmark, so the two
panels that drive that hardware are recognisable without reading the labels.
Drawn inline rather than shipped as an image file, following the language
picker's flags: it scales with the row, follows the theme through currentColor,
and adds no binary asset to the repository.
It is a plain wordmark, not the manufacturer's logo artwork — I did not pull an
image off the web, since I cannot verify the provenance or licence of what I
would find, and redistributing a company's mark inside the product is the
author's call. The component is one function and takes the official SVG in its
place if that is preferred.
Not applied to the Amplifier panel: it covers both the 4O3A PowerGenius XL and
the SPE Expert range, so a single vendor mark there would be wrong.
The messages went to the radio exactly as recorded. Nothing in OpsLog could
raise them, so a microphone captured quietly drove the rig quietly and the only
remedies were the radio's own USB input menu or the Windows mixer — which is
where the operator was heading. There is now a level from 10 to 400 %, applied
with clamping (a wrap would turn loud speech into noise on the air), and Play
previews at that same level so the adjustment is made against what will actually
be transmitted.
The PTT method list also named only OmniRig, Flex, Icom and TCI, so choosing a
native Yaesu left "CAT" with no backend beside it — which reads as "there is no
CAT PTT for my radio" and sends the operator to RTS on a COM port that has
nothing to do with the rig. Same list-needing-every-member shape as three
earlier bugs in this feature. The TestPTT log line had the same rot: it said
"CAT via OmniRig" whatever backend was running.
Selecting the Yaesu keyer fell through to the WinKeyer branch of the settings,
which offers a serial port picker and a Connect button. So the operator went
hunting for the right port — trying the standard COM and the enhanced one in turn
— and neither connected, because this keyer uses NEITHER: it keys over the CAT
link already configured in Settings → CAT.
It now has its own branch, like the Flex one: a speed field, the warning when the
CAT backend is not a Yaesu, and a line saying explicitly that keying rides the
CAT link. Speed changes go to the rig's keyer instead of a WinKeyer that is not
there.
The radio has a keyer and a command to feed it (KY), so an FTDX10 needs no
WinKeyer and no second cable, exactly as the Icom CI-V and Flex CWX engines
already do. The rig keys with its own timing, which is why the spacing is right
where a PC keying a line through USB latency drifts.
Text is filtered to what the keyer can actually send: an unsupported byte does
not produce an error on a Yaesu, it can abort the whole buffer, so the rest of a
macro would vanish silently. It is then fed in 24-character pieces, waiting for
room between them — the rig DROPS what does not fit, again with no error, so a
contest CQ would lose its tail.
STOP is the honest gap. Yaesu documents no buffer-clear, so it drops the
transmitter (TX0) instead: nothing queued reaches the air, which is what Escape
means to an operator. It deliberately does NOT send "KY0;" — a plausible-looking
clear that the rig would read as the CHARACTER zero and transmit.
A test caught a real one on the way: tabs and newlines were dropped as
"unsupported", gluing the words either side together, so a macro written on two
lines went out as CQCQ. Whitespace now becomes a word gap before filtering.
Settings warn when the Yaesu keyer is selected without the Yaesu CAT backend —
otherwise it simply never keys, with nothing on screen saying why.
Send path follows the CAT reference and how Hamlib drives these rigs; NOT yet
verified on the air.
A console pane for the native Yaesu backend, in the same shape as the Icom and
Flex ones: S/PO/SWR meters, band and mode rows, AF/RF/squelch, AGC, the IPO/AMP1/
AMP2 front-end selector, ATT, NB, DNR + level, narrow filter, power in watts, mic
gain, VOX, split and ATU tune.
Three decisions worth keeping:
Panel reads are STAGGERED and live in their own file, away from ReadState. Meters
poll every cycle; settings only change when someone turns a knob, so they refresh
every 8th cycle and right after any set. Polling all of it every cycle would put
twenty queries a second on the serial link the frequency display shares.
Band buttons use the rig's own band memory (BS) rather than a frequency we pick,
so 20 m lands where the operator last was on 20 m — what the radio's own band
keys do.
A set is followed by a read-back, so the panel shows what the RIG ended up with,
not what we asked for; the two differ whenever a value is out of range or the
mode forbids the control. And a control the model lacks keeps its previous value
instead of dropping to zero, which reads as a setting that reset itself.
The S9 point of the S-meter scale is a hypothesis (the manual does not state it)
and is commented as such — one number to correct if reports come out an S unit
off, rather than a fudge spread through the RST helper.
Also removes the FlexRadio settings blurb, which explained the backend to
someone who had already chosen it.
Xiegu speaks CI-V with a reduced command set: frames, BCD encoding, addressing
and the opcodes for frequency, mode, PTT and split are Icom's, so this reuses
internal/cat/civ wholesale instead of re-deriving a codec.
It is a SEPARATE backend rather than the Icom one at address 0x70, because what
the two rigs do NOT share is the deciding part. The Icom backend reads the
spectrum scope, the DSP block, data mode via 1A 06 and the model id via 19 —
none of which a Xiegu implements. Pointed at a G90 it would poll every cycle for
answers that never come, and spend its silence tolerance on commands the radio
was never going to support.
Two consequences of the rig's smaller mode table are handled explicitly rather
than left to fail: there is no data mode, so a digital QSO is set to plain
sideband (what the operator does on the radio anyway) instead of being refused;
and the split TX frequency is NOT reported, because reading the unselected VFO
needs 0x25, which the Xiegu table does not list — a split flag carrying a wrong
TX frequency is worse than the flag alone, since the frequency is what gets
logged.
The published command table has rows that slipped during typesetting (0x07 and
0x0F share a block). Where it contradicts itself the Icom meaning is used, the
rest of the table matching Icom exactly, and every unexpected reply is logged
raw so a first on-air run settles it.
NOT yet verified on a radio.
A native CAT backend owns the rig's serial port, and Windows gives a COM port to
one process — so choosing native CAT locked WSJT-X, MSHV and JTDX out of the
radio entirely. That is the cost of dropping OmniRig, which was itself a sharing
layer, and it has to be paid back.
OpsLog now becomes the server, as wfview does. It speaks the Hamlib net rigctl
protocol, which every one of those programs supports natively (rig model "Hamlib
NET rigctl", 127.0.0.1:4532) with no driver to install. It sits in front of the
MANAGER, not a backend, so an operator on OmniRig, Flex, Icom or TCI gets the
same server.
Two details that decide whether a client works at all rather than degrading:
dump_state is parsed positionally and WSJT-X refuses to proceed without a
well-formed block, so it is written out in full and its shape is pinned by a
test; and set_vfo / set_split_vfo answer RPRT 0 rather than an error, because
OpsLog follows the rig's own VFO and a refusal makes WSJT-X abandon the
connection. Unknown commands answer RPRT -11 — never silence, which hangs a
client instead.
The whole protocol is tested against a fake rig, plus one end-to-end exchange
over a real socket, since the framing is as much the contract as the text.
Also: the Yaesu backend is confirmed working on a real FTDX10 (frequency, mode,
VFO, split), so its "not yet verified" note is now wrong and is corrected.
Every Yaesu fault reported so far came from OmniRig's interpretation layer, not
from the radio: a rig file that never exposes the VFO, a Freq property meaning A
on one model and B on another, a split flag that alternates between polls. This
talks to the rig directly, so what the radio answers is what is shown.
Modern Yaesu CAT is plain ASCII with a ';' terminator — FA/FB for the VFOs, MD0
for the mode, VS for the selected VFO, TX to key. Frequency is written to the VFO
the operator is actually on, not always to A, which is the failure that made a
display disagree with the radio.
Two things are genuinely uncertain across the family and are treated as such
rather than guessed. SPLIT is read through ST, then FT if the rig ignores ST —
whichever answers wins and the choice is remembered, because the two commands say
DIFFERENT things (a split flag vs which VFO transmits). If neither answers, split
is reported OFF and the fact is logged, rather than invented. Unknown model ids
and mode bytes are logged raw for the same reason.
Split resolution, frequency parsing and the mode mapping are pure functions with
a table test — the OmniRig equivalent is where every Yaesu bug lived, and it had
no test until late.
Written from the CAT reference; NOT yet verified on a radio.
Adds the IC-7300MKII at CI-V 0xB6.
Doing so exposed a drift between the two hand-kept copies of the model table: the
settings offered the IC-7700 at 0x88 and the IC-7800 at 0x80, which are the
IC-7100's and the IC-7410's factory addresses. Picking either set an address the
rig never answers on — the symptom is a radio that simply stays silent — and the
backend then named it as the other model. Corrected to 0x74 and 0x6A, and the
four models the backend already knew (IC-7100, IC-7410, IC-7600, IC-7851) are now
offered too instead of forcing a manual address.
A test reads the model list out of the .tsx and asserts civ.ModelName agrees, so
the next model added on one side alone fails the build rather than someone's
radio.
The profile's MY_* metadata is derived from the callsign through cty.dat, and the
effect that derives it ran on every load — so opening the settings counted as
"the source changed" and overwrote whatever the operator had typed. Reported by
an operator in CQ 4 / ITU 4 handed 5 and 9: he corrected them, and each restart
put 5 and 9 back.
cty.dat gives the zones of the ENTITY, and a large country spans several, so the
automatic value cannot be treated as authoritative — it is a starting point. A
load now fills only fields that are EMPTY; a recompute that overwrites happens
only when the callsign or grid itself changes, which is the case the derivation
exists for.
The load-vs-edit distinction is a ref holding the profile id the values were last
derived from — first sight of a profile is a load.
Every port box was parseInt(e.target.value) || <default>. Delete the contents
and parseInt gives NaN, so the default is written straight back: the digits
reappear under the cursor and the only way to enter a different port is to
overwrite it character by character. Reported on the cluster editor; the same
line existed in eight other places.
One PortInput component now holds the raw TEXT as its state and only tells the
parent about a value that is actually a port. An empty box stays empty while you
type; on blur an invalid one falls back to the default, so nothing is ever saved
as 0 or NaN. It adopts a value arriving from the backend only while the operator
has not started typing — re-syncing mid-edit is the behaviour being fixed.
This is the controlled-input trap the project notes already warn about: keep the
raw text in local state and derive the stored value from it.
My mistake yesterday: the new confirmation columns went into uploadStatusCols —
the QSL Manager's FILTER whitelist — instead of bulkEditableCols. The dialog
listed QRZ.com received status and the ten dates, and the repository refused
them at Apply, after the operator had selected 54 QSOs.
Moved to the right map. And two fields have been broken this way since long
before: State and County were offered under "Contacted station" (whose IOTA /
POTA / SOTA / SIG siblings are all allowed) but were missing from the whitelist,
so choosing one always failed. Added — they are exactly what an import loses and
what a whole run shares.
The real fix is the test. Two lists in two languages had to agree by hand and
nothing checked it, so the failure only ever surfaced as an error message at the
last click. The new tests read the ACTUAL field ids out of BulkEditModal.tsx and
FilterBuilder.tsx and assert the repository accepts every one — a field added to
the UI alone now fails the build instead of the operator.
Statistics — the activity chart ignored the period selector: picking a year up
top left it showing the last 7 days, two controls contradicting each other. The
buttons were four fixed rolling windows anchored on the newest QSO, not
granularities. They now choose the BUCKET SIZE over the selected period, with an
Auto default and a step-up when a bucket would be too fine (the backend drops a
series past 750 buckets rather than ship 6000 unreadable bars). The hour-of-day
histogram covered a single day, too little to read anything from; it moves to
its own card with a weekday view, over the whole period.
Band map — the CW/data/phone sub-bands were shaded with the STATUS tokens, the
same amber that means "new band" on the pills drawn on top of them. A sub-band
is an identity, not a state: categorical hues now, validated in both themes
(violet failed on the dark steps — 1.9 ΔE from blue for a protan reader) and
added to the legend, since identity must never be colour-alone.
Frameless window — the OS title bar was a dead 32px band above a window that
already has its own. Minimise/maximise/close move into the app header, which
carries the drag region and double-click-to-maximise. The drag opt-out is by
ROLE in CSS, so a future button in that bar keeps working without anyone
remembering the rule.
Fixes:
- Saving settings froze the window while a device was slow: restarting a link
waits for its poll goroutine, which can sit 45 s inside an uninterruptible COM
Connect when another program holds the rig. The restart is now off the UI
path; a slow one is logged.
- Multi-screen: a MAXIMISED window was never repositioned, so it came back on
the primary screen every launch. The corner is now recorded even when
maximised (it names the monitor) and re-applied while still hidden.
- The Callsign field is marked out at rest — operators were typing the call into
Name, which sat beside it and looked identical.
- QSL dates get a real picker (native, for the OS calendar and locale order); a
malformed old value stays in a text box rather than vanishing behind an empty
one.
Also: a Support OpsLog entry in Help, and a WinKeyer protocol trace. The WK2
report (one element then a ten-second pause, sidetone that will not switch off)
is NOT fixed here: the WK1/WK2/WK3 command sets differ and a guessed fix would
break the operators it works for today. The trace logs every byte with the
command name and spells out the firmware family, which is what will settle it.
rouggy