Club Log refuses with its ordinary web page rather than an error string, so the
new test reported a rejected login by pasting a 403 page — title, stylesheets,
navigation and all — into the status bar. The body now goes to the log, where a
real diagnosis happens, and the operator gets the one sentence there is to act
on: check the e-mail, the password and the logbook callsign.
Dropped the startyear=2099 filter with it, and that one matters more than it
looks. It was there to keep the reply small, but it was never verified against
Club Log's API — and Club Log answers an unrecognised request with the SAME 403
it uses for a refused login. An unverified parameter would therefore have made
every CORRECT password look wrong, which is precisely the failure this change
set out to end. The reply is capped at 4 KB and closed at once instead; the
status code arrives ahead of the body either way.
A PSK Reporter message says "X was heard BY Y". The watcher measured the
distance and bearing from the operator to X and stopped there, never asking who
had actually heard it — so a station 1400 km away, decoded by somebody in Japan,
counted as evidence. That proves the path from X to JAPAN and says nothing about
whether anything reaches this station. It is how a "2 m opening" came to be
announced out of a KX9X in the United States, and the operator was right to find
the callsign list absurd.
Reports are now kept only when the RECEIVING station is within 300 km. Far
enough to borrow the ears of a whole region — an opening reaches an area, not a
postcode, and waiting for a decode at one's own antenna is just working the band
— and close enough that the ionosphere doing something there is it doing the
same thing here. The transmitter still supplies the direction and the path
length, which is what was always wanted from it.
Also drops 12 m from the watched bands, at the operator's request: at this point
in the cycle it is open often enough that announcing it is a notification rather
than news, and a band that cries wolf costs the ones that do not. One fewer
subscription is also less traffic on a PC that pays for every message.
Two faults, both found from one field log: 70 000 decodes, 10 and 12 m plainly
open, nothing announced — and the two openings that DID fire named the wrong
direction.
evaluate() required EVERY distinct station in the window to fit inside one 90°
arc. That is the shape of a sporadic-E cloud and of nothing else. With 10 and 12
m open on F2 the reports arrive from all round the compass, the arc is 360°, and
the test can never pass — so the busier the band, the less likely an opening was
announced. Exactly backwards. It now finds the DENSEST sector instead, which
keeps the Es signature intact (a cloud still makes one direction dense) and lets
a real F2 opening be seen through the handful of neighbours who are always
there. Scattered-but-busy still reports nothing: the point was to stop demanding
global agreement, not to call every open band an opening.
Sector() averaged the two bearings arithmetically, so an arc crossing north was
labelled by its opposite: 353–61° averaged to 207° and went out as SW when it
was NE. Not a vague error — a reversed one, given to an operator who may turn a
beam on it. The detector has handled the 0/360 wrap since it was written; only
this label had not.
TestClublog checked that three fields were non-empty and returned "Ready — CALL
via EMAIL". Nothing was ever sent to Club Log, so a wrong password produced the
identical green message. It now signs in, through getadif.php because that is
the one authenticated endpoint that cannot change anything: a test must never
put a record into someone's log. A future start year keeps it from downloading
130 000 QSOs to prove a password, and a rejected login answers 403 before any
body arrives.
LoTW is two credentials doing two jobs and the button reported only the first.
Uploads go through TQSL signed by the certificate — the website password is
never involved — so a wrong one breaks nothing until the day confirmations are
downloaded, by which time nobody connects the two events. Both are now checked
and, more importantly, reported separately.
Also: the detector still refused 12 and 10 m while the PSK Reporter feed was
already subscribed to them, so those decodes were fetched and thrown away. The
rule was never "HF is out", it is "is an opening here an event" — 20 m being
open is the normal state of the band, 10 m opening is not.
The detection shipped reading whatever the operator's cluster nodes happened to
carry. On VHF that is a few hundred skimmers, nearly all of them on HF: a 6 m
opening carrying 869 stations reached OpsLog as a handful of spots or none, and
Nexus flagged it on the same PC while OpsLog stayed silent.
internal/pskr subscribes to pskr/filter/v2/<band>/# on PSK Reporter's MQTT
broker. Every ordinary station running WSJT-X reports what it decodes, so the
difference is two orders of magnitude rather than a threshold. The feed's shape
suits us exactly: BOTH grids are in each message, so distance and bearing are
arithmetic — no lookup, and no DXCC-centre approximation, which is what made the
cluster path's bearings coarse. The geometry is injected from app.go so it stays
the same arithmetic the cluster path uses; two answers to one question is how a
bearing quietly becomes wrong.
Volume was the design constraint, not the protocol. Six metres open is thousands
of messages a minute and this runs on some very old PCs, so nothing is kept or
persisted in the watcher: each message is parsed, measured and handed on or
dropped, and the detector's existing window does the deciding.
And the part that was the real bug: enabling the watch now ARRANGES ITS OWN
SOURCES. It adds the two RBN nodes when missing and brings the feed up. A
feature that silently depends on sources nobody can know are needed does not
look unconfigured, it looks broken. Matched on host and port, not name, so an
operator who renamed theirs does not get a duplicate — which the detector would
read as twice as many stations, and announce an opening that is not there.
Turning it off leaves the nodes alone: they may have been wanted for their own
sake, and removing a node someone is using is worse than leaving one they are not.
The detector refused any path over 2400 km, reasoning that past a single hop the
bearing test stops meaning anything. That was wrong, and it discarded exactly the
openings worth announcing: Nexus flagged a 6 m opening at 5477 km that OpsLog
never saw, because the spots were thrown away before any test ran.
Multi-hop Es is ordinary on 6 m — 5000 km paths are common, 10000 km happens —
and it stays directional: a second hop leaves the sector the first one entered.
So the sector test, which is what does the real work here, holds perfectly well
at any distance. The ceiling was standing in for a judgement it could not make.
The floor stays at 500 km: a short 6 m contact is tropo or ground wave and says
nothing about the ionosphere. Both are now pinned by a test.
Both are ordinary Hamlib commands, and Nexus sends them around every transmit.
Refusing with RPRT -11 is permitted and a tolerant client carries on, but
nothing obliges it to — and while they sit in the log as "unimplemented" they
stay suspects every time something else goes wrong.
get_lock_mode answers 0, which is true: OpsLog never locks the dial against its
own clients. set_lock_mode is accepted and ignored, like set_vfo — there is no
lock to set, and failing would abort a client's transmit sequence over a setting
with no effect either way. stop_morse answers success because nothing is queued
here: CW is keyed by the rig's own keyer through the backend, never buffered in
this server, so "stopped" is accurate rather than polite.
Whether this is what Nexus is actually unhappy about is not established. It
removes two known irritants and two lines of noise from the log; if the trouble
persists, what remains in the log will be about the trouble.
The catalogue held 23 hand-picked columns, so publishing a county, a satellite
pass or an award reference was simply not possible. It is generated from the
qso.QSO struct now — 123 fields — which also means a new ADIF field cannot be
forgotten here, as a hand-written list always eventually is.
Three keys were renamed to their ADIF names on the way (pota, sota, station).
An alias map keeps existing configurations publishing the same columns; without
it three would have vanished silently on upgrade, which is the worst way for a
setting to change.
The picker had to change with it: 123 chips in one wrap is a wall nobody reads
to the end of. It is sectioned by group, filtered as you type, and the chosen
columns sit on top in publication order — after picking eight out of a hundred,
the question stops being "what exists" and becomes "what did I pick".
The package doc said columns were curated so the operator's address could not
be published. That is no longer true and the comment now says so plainly: the
judgement moved to the operator, the default selection is unchanged, and nothing
is published that was not chosen.
Also collapses the changelog: four separate shared-CAT entries were one thing
from where the operator sits, and all of them were far longer than the one or
two sentences this project asks for.
Nexus sends set_ptt 0 about sixteen times a second, and every one of them became
an "xmit 0" to the FlexRadio — a write every 60 ms, for ever, saying nothing.
Repeating a state is not a request to change it. Only transitions reach the
radio now, and each is logged, so the next "it will not transmit" can be traced
to whoever asked rather than inferred from a wall of identical lines. The first
call always goes through: how the radio was left is not ours to assume.
This is not the whole of the reported symptom, and should not be read as such.
The log also shows "xmit 1" followed by "xmit 0" one to two milliseconds later,
off the 60 ms cadence — that is a genuine transition pair, so it still gets
through and the radio still unkeys at once. Those two commands come from the
client, not from here; the writes originate only in set_ptt, and there is no
loop in OpsLog that emits them.
Listen() succeeding is not the same as being reachable. OpsLog binds 0.0.0.0,
and Windows lets a second program bind the SAME port on the specific address
127.0.0.1. Connections to localhost then go to the more specific listener, so
every client reaches the other program while ours sits there having logged
"sharing CAT on port 4532" and never seeing a single connection.
Found with Nexus, which starts its own rigctld on 127.0.0.1:4532 and talks to
it. Neither side reports anything wrong: the operator gets a CAT timeout from a
daemon with no radio behind it, and OpsLog's log is silent because nothing ever
arrived. Three exchanges went into establishing that the connection simply never
reached us — the port table was what settled it, not the code.
So the server now dials its own port at startup and checks the connection lands
on its own accept loop. If it does not, it says which program will be receiving
the CAT connections and what to do. The counter it compares can only be raised
by our own accept loop, so a real client arriving during the probe makes the
check pass, never fail wrongly.
A client set to a RIG MODEL (Kenwood, Yaesu, …) pointed at the CAT-sharing port
speaks raw rig dialect: "ID;", "IF;". That is not rigctl, so it fell to the
unknown-command branch and got RPRT -11 like anything else.
The symptom hides the cause completely. RPRT -11 has no ';' for the client's
parser to terminate on, so it waits out its timeout and reports "reply
incomplete, got nothing" — a hard failure that reads as "OpsLog's CAT sharing
does not work", when it is one setting in the other program.
A frame ending in ';' with no space in it cannot be a rigctl command, so the log
now says what it is and what to set instead. Reported from Nexus, whose Hamlib
error named kenwood_transaction — the one word that gave it away.
CW over CAT never worked on a Kenwood. The KY implementation was written against
Elecraft's, which accepts a string of any length, so "KY OH5CX;" went out and a
TS-590SG answered "?;". OpsLog read that as "this radio refuses CW over CAT" and
told the operator to fit a serial keyer — advice that was wrong, and expensive.
The TS-590 manual is explicit: P2 has a fixed length of 24, blanks are filled
with spaces, and those spaces are not keyed. So the fix costs nothing on air; it
is simply the shape the command has. Elecraft stays variable-length, where
padding would key the trailing spaces as word gaps.
The semicolon is also gone from the allowed CW characters. It TERMINATES a CAT
frame, the manual forbids it in P2, and one in a macro would have closed the
command early and left the rest of the message to be read as commands.
Found from a log and a manual page, not from a rig: nobody here owns a Kenwood.
What is proven is the frame shape; that a TS-590SG then keys it still needs the
operator to confirm.
A Kenwood answers "?;" while it is busy, and the TS-590SG does it for a moment
after RX; — which is exactly when the poll resumes. One rejected IF; then tore
down the whole CAT link.
The code already knew this. Its own comment says a "?;" to IF; is "a transient
busy, NOT unsupported" and that latching it off "would read as lost the rig".
That reasoning was applied to the unsupported-command map and stopped there: the
call still returned an error, the poll loop still turned it into connected=false,
and the link still dropped.
What it cost was not cosmetic. WSJT-X keys through shared CAT, so it lost the
rig mid-sequence; Hamlib then sent "F 9223372036854775808.000000" - an
uninitialised 2^63 - which OpsLog refused and logged. The operator sees a
frightening frequency error whose actual cause is three lines earlier.
A "?;" is now sentinel-wrapped so the poll can tell "the rig declined" from "the
serial link is gone", and three consecutive ones are ridden out on the last
known state before the link is called dead. Under a second of tolerance: enough
for the rig to finish, far too short to hide an unplugged cable. A serial fault
is untouched and still drops immediately.
Tested against the emulated rig already in this package, with a hook that
answers "?;" on demand: the link survives inside the grace and still reports the
last good frequency, the count resets on recovery so a later busy spell gets the
full allowance, and a rig refusing forever is still reported as broken.
N0CALL is what WSJT-X transmits under when its owner never set a callsign. It
has a letter, a digit and an ordinary shape, so nothing rejected it: it was
spotted, coloured, counted as a new WPX prefix, and now that CQ grids are read
it would have put a grid into the worked index under a callsign nobody holds.
The obvious fix - adding it to looksLikeCall's reject list - was wrong, and the
test caught it before it shipped. That function answers "could this token be a
callsign at all", and the CQ grammar uses it to decide whether the word after CQ
is a modifier (DX, NA, a zone) or the call itself. Teaching it that N0CALL is
not a callsign made "CQ N0CALL JN36" skip a slot and return JN36. Shape and
policy are different questions and now live in different functions.
Chasing that turned up the real defect behind it: ANY unrecognised word after CQ
made the parser skip a slot, and a four-character grid passes every shape test a
callsign does. "CQ FOO JN36" returned JN36 as the sender - logged, spotted and
coloured as a station. A grid in the callsign slot is now refused outright.
The amplifier PUSHES status frames ("S0|state=…") on the same socket it answers
commands on, and it pushes them constantly once in OPERATE - power, SWR and
temperature all move while transmitting.
command() read exactly one line and took whatever arrived first as its answer.
One pushed frame therefore put the stream permanently one reply behind: every
later command read the PREVIOUS command's answer, and eventually one waited out
the 3 s deadline, failed, and dropped the connection. Hence a fresh TCP
connection and a fresh authentication every few seconds in the log.
The stall in transmit is the same defect seen from the other side: command()
holds the connection mutex across that whole dead wait, so SetOperate and every
other control queued behind up to three seconds of nothing.
It only appeared remotely and in OPERATE because that is when there is anything
to push - on a LAN with an idle amplifier the race hardly ever opens. Which is
why it did not do this yesterday.
readReplyLocked now reads until the R<id>| that belongs to the command, feeding
every frame it passes to parse() on the way - a pushed status is fresher than
the one we were about to ask for, so nothing is wasted.
authLocked used the same one-line read and worked around this by re-sending the
whole handshake, which is visible in the log as "auth reply=S0|state=IDLE
(try 1)" followed by a second attempt. It goes through the same reader now.
IOTA is an official ADIF field, and almost everything for it was already here:
the qso table has carried my_iota since the first migration, the insert and scan
handle it, and both ADIF import and export write it. The one missing link was
the station profile, so the reference had to be typed on every contact of an
island activation, or added afterwards in a bulk edit.
Migration 0025 adds the column; it joins my_sota_ref and my_pota_ref in the
profile, in the Station Information panel, and in the same stamp-if-empty block
that fills the other My* fields on a logged QSO.
Uppercased and trimmed on save. ADIF spells it EU-005, and an operator typing
"eu-005" would otherwise put a reference no award matcher recognises on every
QSO of an activation - the kind of mistake you only find months later.
AddQSO emitted qso:logged but never invalidated the cluster status snapshot.
The frontend did its part - it re-queried every visible spot two seconds later -
and ClusterSpotStatuses answered out of a snapshot built before the contact, so
it returned exactly the same "new band" as before. For ever, until an import, an
edit or a profile switch happened to invalidate it for another reason.
Reported twice: an E51 and then a ZD7 that stayed yellow on the band map with
the QSO plainly in the log. The first report was answered by fixing the
visibility gate, which was a real bug of its own and hid this one.
Confirmed against the operator's MySQL logbook rather than guessed: ZD7BG has
dxcc=250 on all eleven QSOs and 0 of 29579 rows lack a DXCC number, which ruled
out the missing-entity-number theory and pointed here.
Deliberately not invalidateAwardStats(): that also drops the award matrices,
which are expensive on a large log, and a contest run would pay for it once per
QSO. This index is a few DISTINCT scans and it is what the spot colours read.
Also fixes the new worked-grid query, which asked for a column named
"gridsquare". The column is "grid" - gridsquare_ext is a different one - so NEW
GRID could never have worked on either backend. Verified against the real
database: 12516 distinct grid|mode pairs.
Backend groundwork; the columns and filters that consume it come next.
GRIDS. A CQ is the one WSJT-X message that carries a locator, and wsjtSender was
throwing that token away. It is now returned, validated as a real field+square,
and remembered per callsign. This is the ONLY grid source available: a DX-cluster
line carries the spotter's grid at best and never the DX's, and a per-callsign
QRZ lookup under an RBN firehose is not a trade worth making. So grids are known
for the stations this receiver decoded - which is exactly the FT8/FT4 watering
hole an operator is looking at while grid chasing.
RR73 is why the grid is validated rather than pattern-matched. R is inside A-R
and 73 inside 00-99, so a sign-off satisfies the Maidenhead shape exactly and
would have planted a grid that does not exist into the index, silently.
NEW GRID keys on "GRID|MODE" with the mode put through the same normMode as
everything else, so the "group digital modes" option decides whether a grid
worked on FT8 is still new on FT4 - one rule, no branch. Grids are truncated to
four characters: a log holds a mix of JN36 and JN36QU, and without that the same
square is new forever, once per subsquare.
On cost, which was the condition: one more DISTINCT scan when the status
snapshot is rebuilt, then map lookups per spot. The same shape as the county and
POTA sets it sits beside, and the snapshot exists precisely so a spot batch never
touches the logbook.
Spotter continent and the LoTW flag come from tables already in memory - the
DXCC prefix table and ARRL's user list - so they cost a lookup each. The spotter
continent answers a different question from the DX's: whether anyone near you is
hearing this at all.
parseFloat accepts a numeric PREFIX. "2026-08-10" therefore became the number
2026, every date in the same year compared equal, and since the sort is stable
nothing moved: the Date column looked as though it were simply not sortable.
The same trap caught every callsign starting with a digit - 8B81SU and 8P9AB
both read as 8 - and the times, where "09:56" became 9. The numeric test is now
anchored to the whole cell, so anything that is not entirely a number is
compared as text, which is exactly right for an ISO date.
Sorting had no way back either. Each row now carries the index it was published
at, and a third click on a header restores that order. Headers also show an
arrow: with no indicator, a column that silently refused to sort was
indistinguishable from one that had sorted into the same order.
Blank cells sink in both directions rather than leading the ascending sort. An
empty field is missing data, not the smallest value.
Tested where it can be: the page ships its own script, so a regression is silent
- the table still renders, it just sorts wrongly.
Observation, not prediction, and it needs no new data source: the cluster event
worker already enriches every spot with the great-circle distance and bearing
from the operator's grid, which is exactly what a single-hop Es detection rests
on.
The signature is four or more DISTINCT stations at 500-2400 km inside a 90
degree bearing sector within twelve minutes. Each constraint earns its place:
distinct callsigns because one station spotted by six skimmers is six spots and
one station; the lower bound because a 6 m contact under 500 km is ordinary
tropo and says nothing about the ionosphere; the upper bound because past one
hop the bearing test stops meaning anything; and the sector because a real Es
cloud illuminates a direction, which is what separates an opening from a merely
busy evening.
Fed AFTER the Historical guard in the worker. A SH/DX reply replays a hundred
past spots in a second - precisely the shape of a burst - and would announce an
opening that ended hours ago.
Season LABELS, it never gates. Both hemispheres get a summer peak and a lesser
winter one, and an opening outside those is announced with "unusual for the
season" attached: the rare one is the one an operator must not hear about last.
One announcement per band per opening (45 minute quiet period). An opening runs
for hours and produces hundreds of spots; one alert is information, forty is
noise.
Settings -> Web publishing. Renders the last N QSOs with the columns the
operator picks, writes the file locally, and optionally uploads it by FTP or
explicit FTPS.
Local write FIRST, upload second, always. A network failure then leaves a good
file on disk that can be published another way, instead of a truncated one on
the server. The local write itself goes to a temp file and renames over the
target, so a reader — or a syncing client — never sees a half-written page.
The HTML page is fully self-contained: inline CSS, inline sort script, no font,
no CDN, no external request at all. It has to work on hosting that blocks
third-party requests, and a page about someone's hobby should not report its
readers to anyone.
Columns are a curated set, not "every ADIF field". This is published to the
public: RST and QSL status belong on it, the operator's home address does not.
Two triggers, both debounced through one path: a QSO is logged, or the optional
timer fires. Fifteen seconds of coalescing means a run of contacts produces one
upload rather than one per QSO, and nobody reading a web page can tell the
difference.
The config is one JSON blob under a single settings key, and that key is marked
sensitive: the FTP password lives inside it, so the whole blob is encrypted at
rest with the others. A locked vault reads back empty, which correctly reads as
"not configured" — publishing must not run with a password it cannot decrypt.
Prefix exists so a field holding a bare value counts for an award whose codes
carry a letter: a French operator writes "74" in STATE, DDFM's codes are "D74".
Def's own doc says exactly that. But searchOne applied the prefix AFTER looking
the token up in the reference list — after the step that had just failed — so
the bare form matched nothing and the prefix decorated an empty result. The only
way through was a regex, in a mode where the operator had chosen "code" and
explicitly not "pattern".
The token lookup now tries the prefixed form when the bare one is not a known
reference. The list stays the authority: an unknown number still matches
nothing, so the prefix completes references rather than inventing them.
Second bug in the same pass: the blanket prefix also hit codes that came
straight OUT of the list, so a field already holding "D74" produced "DD74" as
soon as a prefix was configured — for both the token lookup and the
description matcher. Branches that yield whole codes are now excluded from it;
the ones that yield a raw capture (regex, whole-field split) still get it.
A forwarder (W&P, seen in the field in front of MSHV) prepends the origin as
plain text before re-broadcasting:
"127.0.0.1:2237|" + <the original, untouched WSJT-X packet>
That puts the magic 15 bytes in, so every datagram failed on "bad magic
0x3132372e" — those four bytes being ASCII "127." — and an operator running
MSHV behind the relay saw no decodes, no callsigns and no auto-logged QSOs.
No new service type: what follows the header IS a WSJT-X packet, so the parser
and everything downstream apply unchanged, and a separate type would duplicate
decode, status and logged-ADIF handling to strip 15 bytes. ParseWSJT skips the
header instead, which also covers any other relay that wraps traffic this way.
The match is deliberately narrow — the magic must fall within the first 64
bytes AND every byte before it must be printable ASCII. A corrupt or truncated
packet that merely contains those four bytes somewhere is not resurrected into
a QSO; it fails exactly as it did before.
Test data is the real captured datagram, header included.
"WSJT parse error: bad magic 0x3132372e" named neither the sender nor the
payload, so there was nothing to act on — even though those four bytes are
ASCII "127.", i.e. some program broadcasting an address on a port expecting
WSJT-X binary.
The line now carries the remote address, the size, a printable preview and a
hex dump of the first 96 bytes. Text senders are readable at a glance; a
genuinely binary payload still shows its bytes.
And it stops after five. The reported case wrote that line about 150 times a
second: a permanently misconfigured port would fill the 10 MB rotating log with
one repeated sentence and bury every other piece of evidence — the log's whole
purpose. The fifth line names the two things worth checking, the sender and the
service type.
N1MM's parse error goes through the same path; it had no packet detail either.
The award editor offered five confirmation sources and Def's own doc comment
named five, but confirmed() had cases for three. "qrzcom" and "custom" fell
through the switch, so ticking either marked nothing as confirmed — the exact
failure the GrantCodes comment in this struct warns about: a checkbox that does
nothing is worse than no checkbox, because it is trusted.
QRZ.com reads qrzcom_qso_download_status, not the upload one: uploading a QSO
is us telling QRZ about it, which confirms nothing.
Custom names a field. Rather than a checkbox per external source, the Def gains
ConfirmField + ConfirmValue: any QSO field or ADIF extras key, and optionally
the comma-separated values that count. That one shape covers the three cases
asked for — the OpsLog card marker (APP_OPSLOG_QSL_RCVD), an arbitrary ADIF
tag, and a tag stamped by an imported club list — because all three end up as a
field on the QSO.
An empty ConfirmValue means any non-empty content confirms: the OpsLog marker
stores the date the card arrived, not a Y/N flag. A custom source naming NO
field confirms nothing, deliberately — the opposite default would silently mark
a whole logbook confirmed.
Windows parks a minimised window at -32000,-32000 with a stub size and reports
it as not-maximised, so closing OpsLog from the taskbar while minimised stored
exactly that. Seen in a log: "window: saving -32000,-32000 237x39
maximised=false".
The restore side already rejects both the impossible corner and the
below-minimum size, so nothing opened off-screen — but it fell back to the
default placement, and the operator silently lost the size, the position and the
maximised state they had set.
saveWindowState now keeps what was already stored when the window is minimised.
Two tests for that: the Wails flag, and the -32000 corner, because a window that
is mid-close can sit at that corner with the flag already cleared. A poisoned
window.json repairs itself on the next close of an on-screen window.
Typing RK3DWA found nothing while RK3DWA/3 found 21 QSOs, so a station's
history was only visible if you happened to type the exact form it had been
logged under — and an operator who worked it as /0, /P or /MM saw none of it.
The other RDA tools and Log4OM fold these together; this does too.
The predicate strips the suffix from what was typed and matches "call = base OR
call LIKE base/%", so it works from either end: the base call finds the portable
QSOs and a portable call finds the plain ones. Deliberately not a bare prefix
LIKE 'RK3DWA%', which would also match RK3DWAB — a different station. The '/' is
what makes it the same operator.
Settings -> General to turn it off. Default ON, hence the inverted storage: an
existing install has no key, and reading that as OFF would leave everyone with
the behaviour we were asked to change.
Contest dupe checking is untouched — it runs through ContestDupe, a separate
binding, and stays an exact match as a contest requires.
The Kenwood/Elecraft backend deliberately suspends its wire poll while PTT is
held — a K3 answers "?;" to IF; during transmit, and treating that as a fault
used to drop the whole CAT link. The consequence was that nothing watched the
transmitter: a client that crashed, was closed, or simply had its socket shut
under it left the rig on air.
And shutting the socket is routine. reloadCATShare tears the sharing server
down and rebuilds it on every settings save, so a Save while WSJT-X held PTT
was enough. A K3 operator's log shows exactly that: "TX;" at 17:53:09, no "RX;"
ever, the poll silent, and the rig still keyed 29 s later when the CAT link
happened to be rebuilt.
The server now drops PTT when a connection ends and when Stop() is called.
Stop() runs before reloadCAT restarts the backend, so the unkey still reaches
the radio. An atomic Swap keeps it once-only across the two paths.
MD6 is FSK on a Kenwood and DATA on a K3/K4. kenwoodModeToADIF decoded the
digit unconditionally as RTTY, so OpsLog contradicted the mode it had just
set: SetMode writes MD6 for a digital mode on an Elecraft, then ReadState
parsed the IF frame back as RTTY.
A K3 running FT8 therefore showed RTTY in the status bar, logged its QSOs on
RTTY, and — through the shared CAT server — told WSJT-X/JTDX the rig sat in
RTTY while they had just asked for a data mode. Found in a K3 operator's log:
every cat:state line read mode=RTTY on 21.074 FT8, two lines after OpsLog's
own "MD6;".
The digit now resolves to the configured digital mode whenever MD6 means DATA
on this rig — the Elecraft backend, and the "DATA A - MD6" data-mode option
that exists for it. A plain Kenwood still reads MD6 as RTTY.
The Elecraft handling was buried in the Kenwood "data mode" option, so users
couldn't find it. Add "Elecraft K3/K4" as its own entry in the CAT backend
selector. It reuses the Kenwood-dialect transport and the Kenwood USB/network
settings (the K3 emulates the Kenwood command set — a separate transport would be
a near-total duplicate), with an `elecraft` flag on the client that forces
digital modes to DATA A (MD6+DT0) — no data-mode dropdown needed. RigState still
reports Backend "kenwood" so the CW-over-CAT keyer capability keeps working.
Integrates the fix/jtdx-kenwood-tx work onto main: the Kenwood/Elecraft backend's
"data" data-mode path now sends MD6 then DT0 so a K3/K4 lands in DATA A — the
audio sub-mode FT8 uses. MD6 alone could leave the rig in an FSK/PSK sub-mode
where it keyed but the rear sound-card audio never modulated ("transmits but
nothing comes out"). The data-mode option is relabelled "DATA A — MD6+DT0
(Elecraft K3/K4)". A shared Kenwood/Elecraft backend is kept (the K3 emulates the
Kenwood dialect); the Elecraft specifics live behind the data-mode seam rather
than a 7000-line duplicate backend.
Only OrRule had a Prefix ("prepended to each found reference", e.g. postal 74 →
D74); the primary search passed "" for prefix, so an award whose references are
D01/D02… couldn't prepend the D on its main rule — only on OR fallbacks. Add
Def.Prefix, pass it into the primary run(), and expose a Prefix input next to the
primary Leading/Trailing fields in the award editor.
Sub-option of "back up on every exit": when on, backup.Run/RunADIF stamp the
filename with the time (opslog-YYYY-MM-DD-HHMMSS.db) so each run is a distinct
file instead of overwriting the day's snapshot. Rotation still trims to the
newest N (raise Rotation for a longer history). Threaded as a `unique` flag
through runConfiguredBackup/backupLogADIF from BackupSettings.KeepAll
(keyBackupKeepAll); UI sub-checkbox shown only when EveryExit is on.
Received flag: new APP_OPSLOG_QSL_RCVD extra, toggled on the QSO edit window
next to QSL Message (immediate targeted write via SetOpsLogQSLReceived so it sets
AND clears reliably), plus a live PSE QSL / TNX indicator and a Recent-QSOs
column mirroring the sent one.
PSE/TNX card stamp: automatic — received → TNX, otherwise PSE QSL — exposed as
the {qso.pse_tnx} token (added to qslVars, so preview and send agree) and placed
in the default QSO-box footer; it can be moved to its own element in the designer.
Default QSL message: new qsl.default_message (QSLEmailTemplates.DefaultMessage),
edited under Settings → E-mail → QSL card e-mail. qslVars falls back to it when
the QSO's own QSLMSG is empty, so a per-QSO message always wins. Single choke
point covers both live preview and send.
Since the logbook was split into its own SQLite file, backup.Run was still
snapshotting a.db (the settings/config database) — so the scheduled and manual
backups silently stopped including the QSOs. The operator was backing up config
and thinking it was their log.
Track the resolved logbook file path (a.logDbPath, set in connectLogbook) and
route the backup through a new runConfiguredBackup: the CONTACTS become the
primary "opslog-*" backup (the logbook file on SQLite, an ADIF export on MySQL),
and the settings/config db is snapshotted separately as "opslogcfg-*" so nothing
is lost. backup.Run takes a name prefix; the two sets rotate independently.
A K3 (and other Kenwood-dialect rigs) answers "?;" to an IF; status poll while
it is transmitting. ask() latched that as "IF unsupported" and ReadState
returned an error, so the Manager dropped the whole CAT link mid-transmit — the
log shows connected=false / "IF rejected" the instant JTDX sent TX;. That tore
down the shared rigctld CAT the digital-mode software keys through.
Two fixes: (1) track PTT (SetPTT) and skip the wire poll while it's held —
ReadState hands back the cached last state, capped at 30 s so a missed
SetPTT(false) can't freeze it; (2) never latch IF/ID as unsupported — those are
universal on Kenwood/Elecraft, so a "?;" to them is a transient busy (mid-TX),
not a missing command.
The follow filter correctly leaves the antenna put on an un-ticked band, but the
TX-inhibit loop ran independently: it gagged FlexRadio transmit whenever the
antenna reported "moving" (a stray polled Moving flag, or a move finishing from
the previous band), even on a band OpsLog was deliberately not managing. An
operator working 15 m on another antenna had their FT8 cut mid-transmission by
an "antenna moving" interlock.
motorTXInhibitLoop now takes the covered-band set and forces moving=false when
the current rig band isn't in it — un-ticking a band means hands off entirely:
no tune AND no inhibit. Also correct the RCU-01 references to RCU-06 (the actual
controller behind the short 11-byte status frame).
New internal/rotator/dcu1 client speaking the DCU-1 command set (AP1nnn / AM1
to go-to, AI1 to read bearing), over a serial COM port (4800 baud default) or a
raw TCP serial-over-IP bridge. Azimuth-only; Stop re-commands the current
bearing since the base set has no stop opcode.
Wired through app.go (normRotorType, default port 4001, GoTo/Heading/Stop/test
switches, park returns the same "PstRotator only" note as ARCO) and exposed in
the rotor settings as "Hy-Gain DCU-1 (RotorCard DXA, Rotor-EZ, Green Heron)"
with the ARCO's serial/TCP transport chooser and a bilingual hint. Protocol is
implemented from the standard DCU-1 spec and still needs field confirmation
against a real RotorCard DXA.
Network relay boards (WebSwitch/KMTronic/Dingtian) were always reached at
http://<host>, so a board on the LAN behind a reverse proxy — the common remote
setup where the operator's 80/443 already go to Nginx Proxy Manager — couldn't be
reached from outside. relayBase() now keeps a scheme the operator supplies
(https://relay.example.com, optional sub-path) and only defaults to http:// for a
bare host/host:port. UI hint + test added.
Confirmed live: "setup fanmode=CONTEST" is accepted (reply code 0) while the
bare "fanmode=CONTEST" we switched to earlier is rejected (0x50000015), so the
fan mode snapped back and never changed on the amp. Restored the "setup " verb
and now check the reply code, returning an error if the amp rejects the set.
An older controller behind an RS232-to-Ethernet bridge returns the status frame
without its trailing FreqMax byte (11 bytes, not 12). The packet checksum is
still valid, so it's a real short frame, not a fragment. queryStatus now accepts
>= 10 bytes and defaults the missing FreqMin/FreqMax rather than rejecting it as
"too short", which reconnect-looped the link. Whether the byte LAYOUT is
otherwise identical across controller versions still needs confirming from the
protocol reference.
New DX Cluster setting (Settings → DX Cluster). Off (today's behaviour) a call
worked anywhere reads as already worked; on, the WORKED-call flag needs the same
band AND mode. It folds through the digital-mode grouping (Settings → General):
grouped, a 20m FT8 contact also marks a 20m FT4 spot worked; ungrouped they are
separate slots. Backend: qso.WorkedCallSlotKeys builds CALL|band and
CALL|band|mode(grouped) keys; ClusterSpotStatuses uses them when the option is on
(a spot with no inferable mode falls back to same-band).
Five operator-requested items:
- Alt+W clears the QSO entry. Handled before the `typing` guard and above
the keyer's key routing, so there is always one key that clears whatever
else is running — Esc is not that key when the CW keyer reserves it.
- The Grid box no longer pops outside the entry panel on a narrow window.
Row 2 needed 300+130+76+gaps = 538 px inside a panel whose min-width is
520, so Grid was pushed out and clipped at every narrow width, not just
extreme ones. QTH's min-width drops to 80 and the row wraps rather than
overflowing if it ever still can't fit.
- Selecting a QSO in the log now drives the Stats (F1) matrix. Uses its own
WorkedBefore call into separate state, NOT runWorkedBefore: that one owns
the entry form's wbRef and can trigger a field backfill, which browsing
the log must never do. The entry form wins whenever it holds a call.
- Clicking a coloured band/mode square lists the contacts behind it. Returns
the exact callsign AND the rest of the entity, because that pair is what
the cell's colour encodes; the call's own QSOs are bolded. The DXCC arm
matches the stored dxcc column only — reconstructing it from the callsign
here would disagree with the matrix above, which is built from that column.
- The Awards DXCC list shows each entity's primary prefix in its own sortable
column. Derived live from cty.dat into Ref.Group rather than stored on the
reference row, so an existing installation needs no re-seed.
Switching an SPE amp off left the already-open connection reading as connected
(the amp stops answering once off, but the stale open handle kept the status at
"connected"), so the panel never showed OFF and PowerOn — which only wakes a
DISCONNECTED amp, and must NOT pulse RTS/DTR on a running one — did nothing
until the operator restarted OpsLog. PowerOff now drops the connection and marks
the amp offline, exactly as a fresh start would; the poll's plain reopen never
wakes a switched-off amp, so it stays off until the ON button's RTS/DTR edge.
JTDX polls get_ptt DURING transmit to confirm the rig is keyed (WSJT-X does not,
which is why it worked and JTDX cut after ~2 s). We answered a blanket "0" (RX),
so JTDX concluded PTT had failed and dropped the over. get_ptt now echoes the
last PTT state commanded via set_ptt — always consistent with the client's own
command. Trace showed T 1 → three t→"0" polls → T 0.
The optimistic get_freq echo added in 0.23.5 (to stop the "Fake It" dial creep)
stopped JTDX/WSJT-X from going into transmit: the client reads frequency back
during its TX sequence, and echoing the commanded value instead of the rig's
live value interfered with it. No-TX is far worse than a 0.5 kHz drift, so revert
to reporting the rig's live frequency. get_freq/get_split_freq return s.rig.Freq()
again; the echo state, noteSetFreq, reportedFreq and the drift test are removed.
The antenna does NOT echo our sequence number — its replies carry their own
counter — so the previous seq-matching drained every reply and stalled status
updates. Revert to reading one reply per command, but flush any bytes left in
the stream before each command (drainStale): a reply left by a timed-out command
is discarded so the next read stays 1:1. readPacket also resyncs to the next STX.
This fixes the intermittent disconnects, phantom frequency jumps and wrong
element-length readings without depending on the seq.
Also: report motion for a short window right after a commanded move, so the
"moving" indicator and the Flex TX-inhibit fire the instant a band/pattern is
clicked instead of a poll (~2 s) later; the real motor state takes over once
polled.
rouggy