The satellite page configured its own EasyComm or PstRotator link while five
other backends were configured in the rotator list. An operator with one az/el
mast therefore described it twice, and could describe it differently the second
time — a station that works on HF and not on a pass, for no reason visible
anywhere on screen.
Now every interface lives in Settings ▸ Rotator, once, and the satellite page
stores only a KEY into that list plus the tracking policy that is genuinely its
own (minimum elevation, step, park). The key and not the index: deleting the
first rotor must not silently point the tracker at a different mast.
migrateSatRotator() turns an existing satellite link into a real entry in the
list, selects it, and clears the old keys so it cannot run twice.
Which rotors have an elevation axis is now a question with one answer, in Go:
rotatorTypes plus rotorHasElevation, exposed to the panel by GetRotatorTypes.
The dropdown, the labels, each backend's default port and default baud all come
from there, so TypeScript no longer keeps a second copy of the same knowledge to
drift out of step. Three cases do not follow from the type alone and are treated
as such: PstRotator forwards elevation to a mast that may not have any, so the
operator says; a SPID's dialect decides (Rot1Prog has no elevation in its reply
format); and an ARCO and an ERC-M speak the same GS-232 while only one of them
lifts.
Each interface carries an Az / Az+El badge beside it. The satellite rotor
dropdown LISTS the azimuth-only ones, disabled, rather than hiding them: an
operator who owns one rotator and does not see it concludes OpsLog cannot find
it, where a greyed row saying "azimuth only" teaches the actual thing.
ERC-M by DF9GR is new — the az/el interface for a Yaesu G-5500. It emulates
GS-232, so internal/rotator/gs232 grew the elevation half: W for a two-axis
move, C2 to read both, falling back to C+B for the firmware that answers C2 with
the azimuth alone. That fallback is the point of the parser tests: reading such
a reply as "elevation zero" would put the antenna on the horizon, which is the
one wrong answer that looks plausible.
EasyComm II is promoted to an ordinary rotator interface, so it can also turn
the antenna from the compass and from a spot click.
The ERC-M is UNTESTED on hardware. Its Test button reads BOTH axes rather than
just the azimuth, so a controller wired for azimuth alone says so there instead
of during a pass.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Asked for the wiki to catch up, and to be explicit — examples rather than
descriptions. New page and six rewritten sections.
Recent QSOs and Filters, the page named in the request: the right-click menu is
now a table of what every entry does, and the filter builder has five worked
multi-criteria filters written out field by field, each ending in what you then
do with the result. Including the distinction that prompted it — "export
selected" takes the highlighted rows, "export filtered view" takes every QSO the
filter matched, and after building a filter it is the second one you want. Plus
the traps: ADIF date format, and "is empty" not being "equals N".
Connections (new): the page for a settings section that had none. What OpsLog
listens to and sends, which outbound row another logger actually wants — a
logger asking for "WSJT-X UDP" discards a bare ADIF record — the custom-message
triggers with their placeholder lists, three worked examples, and the port-clash
warning that produced this week's CAT-drop report.
Amplifiers and Switches: the generic HTTP relay in full — per-relay URLs, the
pattern form, {relay}, {relay-1} and {value} with what each one sends — relay
automatic control with a four-relay antenna-switch example, and the bench power
supply including why OpsLog writes only its output.
Rotators: the two new native types (SPID with the Rot1Prog/Rot2Prog choice,
DCU-1), two-rotor setups, and that Test only reads the heading on the types
where it does.
Awards: the US county database, and the difference between the automatic fill
(blanks only) and the right-click re-derive (replaces) — with the Connecticut
planning regions, which is the case that needs it.
QSL Management: QSL_VIA against QSL_SENT_VIA/QSL_RCVD_VIA, why an import shows E
on every Log4OM record, and that V counts as confirmed.
Troubleshooting: the three field reports of the last few days, by symptom.
Every [[link]] checked to resolve.
rouggyandClaude Opus 5