TX_POWER and TX_SWR are read-only commands the radio answers when asked,
so they are asked for on each poll of a KEYED radio and not at all
otherwise: a receiving station pays nothing for meters nobody is watching.
Both appear next to the S-meter only while transmitting, because showing
them the rest of the time would show the last thing that happened as if it
were now.
An SWR of 0 draws as '—' rather than as 1.0. A perfect match on an antenna
nobody has measured is the one reading an operator should never be handed.
There is no temperature. The protocol's command list has TX_POWER and
TX_SWR and nothing thermal at all — so rather than leave the question
hanging, it is written down where the next person will look for it. A
temperature invented from something else, on a transmitter, is exactly the
kind of number somebody would trust.
Working a DXpedition split means guessing where it listens. The useful
information is not the callsign the DX answered but the FREQUENCY that
station was calling on, and a CW skimmer already marks it: SDC posts each
decoded report to the panadapter as a spot.
Those spots reach OpsLog through the radio's spot feed. On a marker, the
TRANSMIT slice moves there plus a signed offset; the receive slice never
moves, because losing the DX is worse than missing a call. The marker
text is a setting -- it is chosen in SDC by the operator, so any constant
here would be wrong for whoever chose otherwise -- and the switch is a
button beside SPLIT, since it is turned on when a DXpedition appears and
off when it is worked.
Moves are throttled and ignore a marker landing where the slice already
is: a busy pile-up produces several reports a second and the slice would
otherwise never be anywhere long enough to call.
The spot feed is now subscribed to unconditionally. It was tied to
OpsLog's own spot overlay, so an operator running SDC with the overlay
off received nothing -- the reason no foreign spot was ever logged. The
connect-time 'spot clear' stays behind the overlay flag: it wipes every
spot on the radio, a skimmer's included.
Chasing a split pileup with a CW skimmer means acting on the report the
DX just sent: SDC posts what it decodes as panadapter spots, so the 5NN
is already on the radio and OpsLog already subscribes to 'spot all'.
What is not known is the shape of those spots -- which field carries the
report, whether it is the callsign or the comment, what source the
skimmer names itself. Guessing produces a feature that never fires, so
this logs the first 60 foreign spots of a session verbatim and does
nothing else. Bounded because a skimmer posts hundreds an hour.
Panadapter spots are now worth reading. The comment carries the spotter, the
entity and the status in DXHunter's own shape — "CQ up 2 [F4BPO] [Franz Josef
Land] [New Slot]" — which needed two things nothing documents: SmartSDR splits
its command line on SPACES, so the words ran together until every space became
non-breaking; and it truncates past ~60 characters, so the cluster's own words
are trimmed first and the three brackets always survive. RBN column padding is
collapsed on the way in, or a preserved run of spaces opened a gap wide enough
to push the rest off screen.
"Already worked" means the CALLSIGN is in the log, not the entity: saying it of
a station never contacted was simply wrong. Each status can also be kept off the
panadapter entirely, and the WSJT-X decode spots obey the same switches — the
palette governs the panadapter, not one of the two things that feed it.
And the radio is no longer hammered: a spot whose frequency, colour and comment
are unchanged is not removed and redrawn. A busy skimmer feed re-spots the same
station every few seconds; one two-minute session sent 2128 adds, 88 of them for
a single callsign, and the display did not move a pixel for any of them.
CI-V, from an IC-7850 that kept killing JTDX: a reply the rig sent to another
controller on the same bus is no longer taken for ours, and a set_ptt, set_freq
or set_mode whose acknowledgement goes missing is verified by reading the rig
back instead of being reported as a failure. WSJT-X and JTDX answer a failed
command with a Rig Control Error and drop the link mid-over — 98 keyings, 6 lost
acknowledgements, 2 dropped connections in one session. The check waits 700 ms,
not the poll's 150: the rig has just failed to answer twice because it was
retuning, and a short probe would fail for the same reason.
Auto-call is withdrawn — it duplicated DXHunter, which already answers decodes,
and two programs deciding that from one shack key over each other. The library
is kept whole and dormant; a guard in App.tsx makes sure a stored preference
cannot key a transmitter whose switch no longer exists.
Also:
- the log rotates while running, not only at startup: the CI-V trace left on
wrote 416 MB and nothing would have stopped it before the disk did. Closing
it now releases the crash file too — the runtime keeps its own duplicate.
- the interface zoom announces itself, with a badge, a click back to 100% and
a View menu; Ctrl+wheel and Ctrl+0 always worked and nothing said so.
- no more elastic bounce, and no swipe-to-navigate out of the app.
- Edit QSO: your own TX power and the contacted station's extended locator
were saved and written back with no box to set them.
- FT decodes: continents are a multiple choice; a compound MSHV message that
answers two stations in one line is recognised as addressed to you.
set_split_vfo and set_split_freq both answered RPRT 0 and did nothing. WSJT-X
and JTDX in "Split Operating: Rig" send exactly that pair, believed both, and
transmitted on the RECEIVE frequency — on a pileup, straight onto the DX, while
showing the operator precisely what they had asked for. A lie that leaves no
trace in any log is the worst kind of bug this program can have.
The two commands are honoured as a PAIR. Arming alone does nothing on the radio,
because WSJT-X sends the frequency second and split armed on whatever the
transmit VFO happened to hold is worse than no split at all: it transmits
somewhere the operator never chose. The request is remembered and set_split_freq
does the work.
Kenwood gains SetSplit — FB to place the dial, then FR0/FT1 to arm, in that
order for the same reason. It writes what State() already knows how to read.
Everything else REFUSES, and that is the feature, not a shortfall. Only Flex and
Icom could even toggle split before, neither could set the transmit frequency,
and Yaesu, TCI and OmniRig have nothing at all. A refusal WSJT-X can report —
and act on, by falling back to Fake It — is worth far more than a success it has
no way to check.
Both paths are pinned: split reaching the rig as one armed call with the right
frequency, and a backend that cannot do it producing an error rather than RPRT 0.
- PGXL: remote AUTH password; direct-link meter fallback (VITA-first) with
250 ms poll + peak-hold; fan mode uses bare "fanmode=" (was ignored).
- TCI: spot colour sent as decimal ARGB (ExpertSDR dropped the hex string);
spot click handled via CLICKED_ON_SPOT / RX_CLICKED_ON_SPOT to fill the entry.
- FlexRadio: clicking an OpsLog spot on the panadapter now applies the mode too.
- Filter presets: the trash icon deletes again (Radix pointer-down intercept).
- PTT hotkey: keys over CAT when a backend is active (was hijacked by a stale
Audio-tab RTS/DTR serial setting); AltGr keys allowed; presses logged.
- CW macro <LOGQSO>: logs after the preceding CW is sent, not on the first letter.
SmartSDR moves its active flag onto the TX slice as soon as the transmit
frequency is touched, and OpsLog followed it. But the operator is listening to
the DX on the other slice: the S-meter, audio level, filter and DSP they are
adjusting all belong there, so following the transmitter handed them the
controls of a receiver they were not using.
In split the receive slice now wins. Simplex is unchanged, and two same-band
slices in different classes (SSB alongside FT8) are still not a split.
A slice clicked IN OPSLOG is remembered and overrides both the split rule and
the radio's focus — that is the operator speaking. Activating a slice on the
radio or in SmartSDR deliberately does not move OpsLog. The pin is dropped when
that slice stops being in use, so a closed receiver cannot strand the display.
The panel now highlights the slice OpsLog is working with rather than the radio's
focused one; reporting the radio's flag would light up one slice while every
control acted on another.
They arrive many times a second and were dumped every 5 s, drowning the rest of
the log. They only ever existed to confirm the meter NAMES during development,
which the subscription line already does — and that one is now a single summary
instead of one line per meter, a Flex announcing dozens of them at each connect.
- SCP/N+1: new internal/scp downloads the community MASTER.SCP master list and a
docked two-column widget shows, as you type a call, the known calls containing it
(Partial) and the calls one edit away (N+1) — click to fix a busted call. Opt-in
in Settings → General; top-bar toggle; queried debounced on callsign input.
- Flex: OpsLog's GUI-client detection was too loose and could bind to "SmartSDR CAT"
(or DAX) — both carry "smartsdr" in the program name — instead of the real GUI
client, making SmartSDR CAT drop and reconnect in a loop while OpsLog was open.
Now it binds only to a real SmartSDR/Maestro GUI client (e.g. a FLEX-8600M's
integrated screen) and excludes cat/dax; dropped the risky empty-program fallback.
- Telemetry: on a fresh install the callsign isn't set at launch, so the once-a-day
heartbeat recorded the machine UUID. Now it waits (~10 min) for the operator to
enter their callsign before sending, falling back to the UUID only if none appears.
The motorized-antenna follow loop keyed its deadband off the antenna's reported
frequency. A SteppIR reports an intermittent/stale status frequency (flips
between the commanded freq and its home/6 m value), so the deadband tripped on
almost every 1.5 s poll and re-issued a tune command. Each command refreshed
noteMotorMoveCommanded(), keeping motorTXInhibitLoop's recentCmd window alive, so
the Flex transmit-inhibit ("Interlock is preventing transmission") never
released — confirmed in a real log (moving=0 throughout, recentCmd was the
driver).
Follow loop now keys the deadband off the LAST COMMANDED rig frequency, only
re-tuning when the radio actually QSYs beyond the step — immune to a flaky
antenna status. Falls back to the antenna's freq only until the first command.
Also dropped SetTXInhibit's `interlock set reason=` sends: `reason` is a
read-only field on the Flex interlock object, so writing it is rejected
(cmd error 5000002D on V1.4.0.0) and did nothing; `transmit set inhibit=` is the
real mechanism and is unchanged.
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.
Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
Completes the CWX type-ahead loop: with send-on-type the keyer-panel CW text
already streams each typed char to the radio's CWX buffer (which keys in order,
so you can keep typing while it sends); this adds the matching un-send. Route
wkBackspace to FlexBackspaceCW -> cwx erase N, so backspacing a mistyped char in
send-on-type removes it from the buffer before the radio keys it.
rouggy