feat: generalize Settings 'Power Genius' into 'Amplifier' (type + serial/IP transport) for SPE Expert

Renames the Hardware section to Amplifier and adds an amplifier-type selector (4O3A PowerGenius XL, SPE Expert 1.3K-FA / 1.5K-FA / 2K-FA) plus a transport choice for the SPE amps: USB (serial COM + baud) or Network (RS232-to-Ethernet IP:port). PGXLSettings gains Type/Transport/ComPort/Baud (keys keep the pgxl.* prefix for back-compat). PowerGenius still drives over TCP; SPE settings are stored but control is not wired yet (needs the SPE serial protocol).
ui: label both USB relay backends as 'Denkovi USB' (FT245/D2XX vs serial/COM)
2026-07-20 17:44:56 +02:00 · 2026-07-20 17:33:02 +02:00 · 2026-07-20 17:23:38 +02:00 · 2026-07-20 16:50:04 +02:00 · 2026-07-20 16:12:24 +02:00 · 2026-07-20 15:51:32 +02:00
17 changed files with 1797 additions and 116 deletions
@@ -182,10 +182,16 @@ const (
 	keyAntGeniusHost     = "antgenius.host"
 	keyAntGeniusPassword = "antgenius.password" // remote/AUTH password (blank on LAN)

-	// PowerGenius XL (4O3A) amplifier fan-mode control — Hardware → PowerGenius.
-	keyPGXLEnabled = "pgxl.enabled"
-	keyPGXLHost    = "pgxl.host"
-	keyPGXLPort    = "pgxl.port"
+	// Amplifier control — Hardware → Amplifier (PowerGenius XL over TCP; SPE Expert
+	// over USB serial or an RS232-to-Ethernet bridge). Keys keep the pgxl.* prefix
+	// for backward compatibility with existing saved settings.
+	keyPGXLEnabled   = "pgxl.enabled"
+	keyPGXLHost      = "pgxl.host"
+	keyPGXLPort      = "pgxl.port"
+	keyPGXLType      = "pgxl.type"      // "pgxl" | "spe13" | "spe15" | "spe2k"
+	keyPGXLTransport = "pgxl.transport" // "tcp" | "serial"
+	keyPGXLComPort   = "pgxl.com_port"
+	keyPGXLBaud      = "pgxl.baud"

 	// WinKeyer CW keyer (serial) — Hardware → CW Keyer.
 	keyWKEnabled    = "winkeyer.enabled"
@@ -699,6 +705,20 @@ func (a *App) startup(ctx context.Context) {
 			usingDefault = false
 		}
 	}
+	// A rename in a previous session left the OLD file to delete now that it's no
+	// longer open. Only ever delete a file that ISN'T the one we're about to use.
+	if boot := readBootstrap(dataDir); strings.TrimSpace(boot.DeletePending) != "" {
+		old := strings.TrimSpace(boot.DeletePending)
+		if old != a.dbPath {
+			for _, p := range []string{old, old + "-wal", old + "-shm"} {
+				if err := os.Remove(p); err == nil {
+					fmt.Printf("OpsLog: removed old database file %s\n", p)
+				}
+			}
+		}
+		boot.DeletePending = ""
+		_ = writeBootstrap(dataDir, boot)
+	}
 	if err := os.MkdirAll(filepath.Dir(a.dbPath), 0o755); err != nil {
 		a.startupErr = "cannot create db folder: " + err.Error()
 		fmt.Println("OpsLog:", a.startupErr)
@@ -1340,6 +1360,11 @@ func copyFileData(src, dst string) error {
 type dbPointer struct {
 	DBPath string         `json:"db_path"`
 	MySQL  *MySQLSettings `json:"mysql,omitempty"`
+	// DeletePending is the previous database file to remove on the NEXT launch —
+	// set by a rename, which can't delete the still-open old file in-process. The
+	// startup path deletes it (with its -wal/-shm sidecars) once the new DB is the
+	// one in use, then clears this.
+	DeletePending string `json:"delete_pending,omitempty"`
 }

 func dbPointerPath(dataDir string) string { return filepath.Join(dataDir, "config.json") }
@@ -1653,9 +1678,10 @@ func (a *App) PickSaveDatabase() (string, error) {
 		return "", fmt.Errorf("no app context")
 	}
 	return wruntime.SaveFileDialog(a.ctx, wruntime.SaveDialogOptions{
-		Title:           "Save the OpsLog database to…",
-		DefaultFilename: "opslog.db",
-		Filters:         []wruntime.FileFilter{{DisplayName: "SQLite database (*.db)", Pattern: "*.db"}},
+		Title:            "Save the OpsLog database to…",
+		DefaultDirectory: filepath.Dir(a.dbPath),
+		DefaultFilename:  "opslog.db",
+		Filters:          []wruntime.FileFilter{{DisplayName: "SQLite database (*.db)", Pattern: "*.db"}},
 	})
 }

@@ -1697,6 +1723,44 @@ func (a *App) MoveDatabase(dest string) error {
 	return writeDBPointer(a.dataDir, dest)
 }

+// RenameDatabase renames the current database file to dest — keeping ALL config
+// (it is the same database under a new name), unlike "New database" which starts
+// empty. Implemented as a consistent copy (VACUUM INTO) plus a switch, then the
+// ORIGINAL file is scheduled for deletion on the next launch (it is open now and
+// can't be removed in-process on Windows). dest must not already exist.
+func (a *App) RenameDatabase(dest string) error {
+	dest = strings.TrimSpace(dest)
+	if dest == "" {
+		return fmt.Errorf("no destination given")
+	}
+	if a.db == nil {
+		return fmt.Errorf("database not open")
+	}
+	old := a.dbPath
+	if strings.EqualFold(filepath.Clean(dest), filepath.Clean(old)) {
+		return fmt.Errorf("that is already the current database name")
+	}
+	if _, err := os.Stat(dest); err == nil {
+		return fmt.Errorf("a file already exists at %s — pick a new name", dest)
+	}
+	if err := os.MkdirAll(filepath.Dir(dest), 0o755); err != nil {
+		return fmt.Errorf("create folder: %w", err)
+	}
+	safe := strings.ReplaceAll(dest, "'", "''")
+	if _, err := a.db.ExecContext(a.ctx, "VACUUM INTO '"+safe+"'"); err != nil {
+		return fmt.Errorf("copy database: %w", err)
+	}
+	boot := readBootstrap(a.dataDir)
+	boot.DBPath = dest
+	// Only schedule the old file for deletion when it's a real, on-disk file (a
+	// custom path or the default opslog.db) — never something we somehow share
+	// with the destination.
+	if strings.TrimSpace(old) != "" && !strings.EqualFold(filepath.Clean(old), filepath.Clean(dest)) {
+		boot.DeletePending = old
+	}
+	return writeBootstrap(a.dataDir, boot)
+}
+
 // CreateDatabase creates a fresh, empty logbook at dest (schema migrated) and
 // points OpsLog at it for the next launch. dest must not already exist.
 func (a *App) CreateDatabase(dest string) error {
@@ -2452,6 +2516,14 @@ func (a *App) migrateAwardDefs() {
 		applog.Printf("awards: %s updated from the catalog (v%d)", code, defByCode(migrated, code).Version)
 		a.reseedRefsFromCatalog(code)
 	}
+	// A catalog definition changed (e.g. DDFM gained the postal-code OR-rule), so
+	// the materialised award_refs on existing QSOs are now stale. Clear the
+	// one-shot backfill flag; backfillAwardRefsOnce runs later in startup and will
+	// re-materialise every row against the updated definitions. This makes ANY
+	// future catalog bump self-heal the stored columns without a manual flag bump.
+	if len(updated) > 0 {
+		_ = a.settings.Set(a.ctx, keyAwardsMaterialized, "")
+	}
 	// Version-gated correction of the built-in awards' Validate sources, which
 	// an earlier version wrongly set equal to Confirm (so VALIDATED == CONFIRMED
 	// even for paper-QSL-only entities). Re-apply the canonical Confirm/Validate
@@ -3415,6 +3487,10 @@ func (a *App) invalidateAwardStats() {
 // flips qsl_rcvd flags on existing rows).
 func (a *App) RescanAwards() error {
 	a.invalidateAwardStats()
+	// Also refresh the materialised award_refs on every QSO (the grid columns read
+	// from there). Manual trigger for when a definition/reference change should be
+	// re-applied to existing rows on demand rather than waiting for the next event.
+	a.recomputeAwardRefsAsync()
 	return nil
 }

@@ -3821,7 +3897,12 @@ func (a *App) recomputeAwardRefsAsync() {

 // keyAwardsMaterialized marks (per profile / logbook) that the one-time award_refs
 // backfill has run, so it doesn't re-scan the whole logbook on every launch.
-const keyAwardsMaterialized = "awards.materialized.v1"
+// keyAwardsMaterialized is versioned: bump the suffix to force every operator to
+// re-materialise award_refs once on next launch. Needed when the stored values
+// could be stale against the CURRENT award definitions — e.g. rows materialised
+// before an award gained a new matching rule (DDFM's postal-code OR-rule), which
+// the one-shot backfill would otherwise never revisit.
+const keyAwardsMaterialized = "awards.materialized.v2"

 // backfillAwardRefsOnce populates award_refs for QSOs that predate the feature
 // (or were logged by an older client that didn't materialise them). It runs at
@@ -4186,6 +4267,65 @@ func (a *App) ExportAward(code string) (string, error) {
 	return a.exportAwardBundle([]string{code}, "OpsLog_award_"+code+".json", "Export award "+code)
 }

+// ExportAwardForCatalog writes ONE award as a ready-to-ship CATALOG file — the
+// exact shape internal/award/catalog/*.json use ({"def":{…},"references":[…]}).
+//
+// The workflow it enables: edit an award in the UI, call this with the NEXT
+// version number, and paste the file over that award's catalog JSON. A new OpsLog
+// release then carries the change to the whole team: every operator whose copy is
+// unedited auto-upgrades to it (mergeCatalog), and those who edited it keep theirs
+// but are offered the update.
+//
+// Two things a plain export/mirror can't do and this does, both essential for a
+// catalog file: it STAMPS the award's Version (the UI save deliberately never
+// bumps it) and it CLEARS user_edited, so a fresh install seeded from this file is
+// NOT pre-flagged as the operator's own work — which would otherwise freeze it out
+// of every future catalog update.
+func (a *App) ExportAwardForCatalog(code string, version int) (string, error) {
+	if a.awardRefs == nil || a.ctx == nil {
+		return "", fmt.Errorf("db not initialized")
+	}
+	code = strings.ToUpper(strings.TrimSpace(code))
+	var def award.Def
+	found := false
+	for _, d := range a.awardDefs() {
+		if strings.EqualFold(strings.TrimSpace(d.Code), code) {
+			def, found = d, true
+			break
+		}
+	}
+	if !found {
+		return "", fmt.Errorf("unknown award %q", code)
+	}
+	def.Version = version
+	def.UserEdited = false // a catalog seed is not "the operator's edit"
+	def.Builtin = true
+	refs, err := a.awardRefs.List(a.ctx, code)
+	if err != nil {
+		return "", fmt.Errorf("load references: %w", err)
+	}
+	entry := struct {
+		Def        award.Def       `json:"def"`
+		References []awardref.Ref  `json:"references,omitempty"`
+	}{Def: def, References: refs}
+	b, err := json.MarshalIndent(entry, "", "  ")
+	if err != nil {
+		return "", err
+	}
+	path, err := wruntime.SaveFileDialog(a.ctx, wruntime.SaveDialogOptions{
+		DefaultFilename: strings.ToLower(code) + ".json",
+		Title:           "Export " + code + " for the catalog",
+		Filters:         []wruntime.FileFilter{{DisplayName: "JSON (*.json)", Pattern: "*.json"}},
+	})
+	if err != nil || strings.TrimSpace(path) == "" {
+		return "", err
+	}
+	if err := os.WriteFile(path, b, 0o644); err != nil {
+		return "", err
+	}
+	return path, nil
+}
+
 // exportAwardBundle writes the given award codes (nil = all) to a JSON bundle.
 func (a *App) exportAwardBundle(codes []string, defaultName, title string) (string, error) {
 	if a.awardRefs == nil {
@@ -10225,6 +10365,45 @@ func (a *App) IcomSendCW(text string) error {
 	return err
 }

+// FlexSendCW keys a CW message through the FlexRadio CWX keyer (SmartSDR), so a
+// Flex needs no WinKeyer / SmartCAT. Text is already variable-resolved by the UI.
+func (a *App) FlexSendCW(text string) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	err := a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SendCW(text) })
+	if err != nil {
+		applog.Printf("flex cw: FlexSendCW(%q) failed: %v", text, err)
+	}
+	return err
+}
+
+// FlexStopCW clears the CWX buffer, aborting whatever is being keyed.
+func (a *App) FlexStopCW() error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.StopCW() })
+}
+
+// FlexSetKeySpeed sets the CW keyer speed in WPM (the CWX keyer uses the radio's
+// CW speed).
+func (a *App) FlexSetKeySpeed(wpm int) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetCWSpeed(wpm) })
+}
+
+// FlexBackspaceCW removes the last n not-yet-keyed characters from the CWX buffer
+// (type-ahead correction). n<1 deletes one.
+func (a *App) FlexBackspaceCW(n int) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.BackspaceCW(n) })
+}
+
 // IcomStopCW aborts the CW message currently being sent.
 func (a *App) IcomStopCW() error {
 	if a.cat == nil {
@@ -11224,28 +11403,58 @@ func boolStr(b bool) string {
 // StationDevice is one configured relay board for the Station Control tab.
 type StationDevice struct {
 	ID     string   `json:"id"`
-	Type   string   `json:"type"` // "webswitch" | "kmtronic"
+	Type   string   `json:"type"` // "webswitch" | "kmtronic" | "denkovi" | "usbrelay"
 	Name   string   `json:"name"`
-	Host   string   `json:"host"`
+	Host   string   `json:"host"` // IP for network boards; FTDI serial for denkovi; COM port for usbrelay
 	User   string   `json:"user,omitempty"` // KMTronic HTTP auth (blank = none)
 	Pass   string   `json:"pass,omitempty"`
+	Channels int    `json:"channels,omitempty"` // usbrelay only: number of relays (1/2/4/8/16)
 	Labels []string `json:"labels"` // per-relay label (index 0 = relay 1)
 }

+// deviceRelayCount is the relay count for a configured device — fixed by type,
+// except the Denkovi (4 or 8) and the generic USB-serial board, whose channel
+// count the user picks.
+func deviceRelayCount(d StationDevice) int {
+	if d.Type == "usbrelay" || d.Type == "denkovi" {
+		if d.Channels >= 1 {
+			return d.Channels
+		}
+		return 8
+	}
+	return relayCountFor(d.Type)
+}
+
 // relayCountFor returns a device type's fixed relay count.
 func relayCountFor(typ string) int {
-	if typ == "kmtronic" {
+	switch typ {
+	case "kmtronic", "denkovi":
 		return 8
+	default:
+		return 5 // webswitch 1216H
 	}
-	return 5 // webswitch 1216H
 }

 // deviceDriver builds the wire driver for a configured device.
 func deviceDriver(d StationDevice) relaydev.Device {
-	if d.Type == "kmtronic" {
+	switch d.Type {
+	case "kmtronic":
 		return relaydev.NewKMTronic(d.Host, d.User, d.Pass)
+	case "denkovi":
+		// Host carries the FTDI serial number (e.g. "DAE0006K"), not a hostname.
+		return relaydev.NewDenkovi(d.Host, deviceRelayCount(d))
+	case "usbrelay":
+		// Host carries the COM port (e.g. "COM5"); CH340/LCUS "A0" serial protocol.
+		return relaydev.NewSerialRelay(d.Host, deviceRelayCount(d))
+	default:
+		return relaydev.NewWebswitch(d.Host)
 	}
-	return relaydev.NewWebswitch(d.Host)
+}
+
+// ListDenkoviDevices returns the FTDI serial numbers of connected Denkovi/FTDI
+// boards, for the settings picker. Windows-only (FTDI D2XX).
+func (a *App) ListDenkoviDevices() ([]string, error) {
+	return relaydev.ListDenkovi()
 }

 // GetStationDevices returns the configured relay boards (without live state).
@@ -11271,13 +11480,16 @@ func (a *App) SaveStationDevices(devs []StationDevice) error {
 		return fmt.Errorf("db not initialized")
 	}
 	for i := range devs {
-		if devs[i].Type != "kmtronic" {
+		switch devs[i].Type {
+		case "kmtronic", "denkovi", "usbrelay", "webswitch":
+			// known type — keep
+		default:
 			devs[i].Type = "webswitch"
 		}
 		if strings.TrimSpace(devs[i].ID) == "" {
 			devs[i].ID = fmt.Sprintf("dev%d-%d", i, time.Now().UnixNano())
 		}
-		n := relayCountFor(devs[i].Type)
+		n := deviceRelayCount(devs[i])
 		for len(devs[i].Labels) < n {
 			devs[i].Labels = append(devs[i].Labels, "")
 		}
@@ -11318,7 +11530,7 @@ func (a *App) GetStationStatus() []StationDeviceStatus {
 		go func(i int) {
 			defer wg.Done()
 			d := devs[i]
-			n := relayCountFor(d.Type)
+			n := deviceRelayCount(d)
 			ds := StationDeviceStatus{ID: d.ID, Name: d.Name, Type: d.Type}
 			ctx, cancel := context.WithTimeout(a.ctx, 6*time.Second)
 			defer cancel()
@@ -11925,19 +12137,25 @@ func (a *App) AntGeniusDeselect(port int) error {

 // ── PowerGenius XL (4O3A) amplifier fan control (TCP, default port 9008) ─────

-// PGXLSettings is the JSON shape for the Hardware → PowerGenius panel.
+// PGXLSettings is the JSON shape for the Hardware → Amplifier panel. It covers
+// the 4O3A PowerGenius XL (TCP) and the SPE Expert amps (USB serial or an
+// RS232-to-Ethernet bridge). The type name is kept for binding compatibility.
 type PGXLSettings struct {
-	Enabled bool   `json:"enabled"`
-	Host    string `json:"host"`
-	Port    int    `json:"port"`
+	Enabled   bool   `json:"enabled"`
+	Type      string `json:"type"`      // "pgxl" | "spe13" | "spe15" | "spe2k"
+	Transport string `json:"transport"` // "tcp" | "serial"
+	Host      string `json:"host"`      // TCP transport
+	Port      int    `json:"port"`      // TCP transport
+	ComPort   string `json:"com_port"`  // serial transport
+	Baud      int    `json:"baud"`      // serial transport
 }

 func (a *App) GetPGXLSettings() (PGXLSettings, error) {
-	out := PGXLSettings{Port: 9008}
+	out := PGXLSettings{Type: "pgxl", Transport: "tcp", Port: 9008, Baud: 115200}
 	if a.settings == nil {
 		return out, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyPGXLEnabled, keyPGXLHost, keyPGXLPort)
+	m, err := a.settings.GetMany(a.ctx, keyPGXLEnabled, keyPGXLHost, keyPGXLPort, keyPGXLType, keyPGXLTransport, keyPGXLComPort, keyPGXLBaud)
 	if err != nil {
 		return out, err
 	}
@@ -11946,6 +12164,16 @@ func (a *App) GetPGXLSettings() (PGXLSettings, error) {
 	if p, _ := strconv.Atoi(m[keyPGXLPort]); p > 0 && p <= 65535 {
 		out.Port = p
 	}
+	if t := strings.TrimSpace(m[keyPGXLType]); t != "" {
+		out.Type = t
+	}
+	if tr := strings.TrimSpace(m[keyPGXLTransport]); tr != "" {
+		out.Transport = tr
+	}
+	out.ComPort = m[keyPGXLComPort]
+	if b, _ := strconv.Atoi(m[keyPGXLBaud]); b > 0 {
+		out.Baud = b
+	}
 	return out, nil
 }

@@ -11956,10 +12184,23 @@ func (a *App) SavePGXLSettings(s PGXLSettings) error {
 	if s.Port <= 0 || s.Port > 65535 {
 		s.Port = 9008
 	}
+	if s.Baud <= 0 {
+		s.Baud = 115200
+	}
+	if s.Type == "" {
+		s.Type = "pgxl"
+	}
+	if s.Transport == "" {
+		s.Transport = "tcp"
+	}
 	for k, v := range map[string]string{
-		keyPGXLEnabled: boolStr(s.Enabled),
-		keyPGXLHost:    strings.TrimSpace(s.Host),
-		keyPGXLPort:    strconv.Itoa(s.Port),
+		keyPGXLEnabled:   boolStr(s.Enabled),
+		keyPGXLHost:      strings.TrimSpace(s.Host),
+		keyPGXLPort:      strconv.Itoa(s.Port),
+		keyPGXLType:      s.Type,
+		keyPGXLTransport: s.Transport,
+		keyPGXLComPort:   strings.TrimSpace(s.ComPort),
+		keyPGXLBaud:      strconv.Itoa(s.Baud),
 	} {
 		if err := a.settings.Set(a.ctx, k, v); err != nil {
 			return err
@@ -11979,7 +12220,17 @@ func (a *App) startPGXL() {
 		a.pgxl = nil
 	}
 	s, err := a.GetPGXLSettings()
-	if err != nil || !s.Enabled || strings.TrimSpace(s.Host) == "" {
+	if err != nil || !s.Enabled {
+		return
+	}
+	// Only the PowerGenius XL (TCP) is driven for now. SPE Expert control (serial /
+	// RS232-to-Ethernet) is a separate protocol, not yet implemented — its settings
+	// are stored but no client is started.
+	if s.Type != "" && s.Type != "pgxl" {
+		applog.Printf("amplifier: type %q selected — control not implemented yet (settings saved)", s.Type)
+		return
+	}
+	if strings.TrimSpace(s.Host) == "" {
 		return
 	}
 	a.pgxl = powergenius.New(s.Host, s.Port)
@@ -36,6 +36,7 @@ import {
  GetWinkeyerSettings, SaveWinkeyerSettings, ListSerialPorts, GetWinkeyerStatus,
  WinkeyerConnect, WinkeyerDisconnect, WinkeyerSend, WinkeyerStop, WinkeyerSetSpeed, WinkeyerBackspace,
  IcomSendCW, IcomStopCW, IcomSetKeySpeed, IcomSetBreakIn, GetIcomState,
+  FlexSendCW, FlexStopCW, FlexSetKeySpeed, FlexBackspaceCW,
  GetDVKMessages, GetDVKStatus, DVKPlay, DVKStop,
  StartCWDecoder, StopCWDecoder, SetCWDecoderPitch,
  ChatAvailable, GetChatHistory, SendChatMessage, GetOnlineOperators,
@@ -775,7 +776,7 @@ export default function App() {
  // CI-V 0x17 (no extra hardware — sends over the CAT connection). Macros,
  // auto-call and <LOGQSO> are shared; only the transport differs.
  const [wkEngine, setWkEngine] = useState<string>('winkeyer');
-  const cwSource: 'winkeyer' | 'icom' = wkEngine === 'icom' ? 'icom' : 'winkeyer';
+  const cwSource: 'winkeyer' | 'icom' | 'flex' = wkEngine === 'icom' ? 'icom' : wkEngine === 'flex' ? 'flex' : 'winkeyer';
  const cwSourceRef = useRef(cwSource);
  useEffect(() => { cwSourceRef.current = cwSource; }, [cwSource]);
  // CW break-in (0=OFF, 1=SEMI, 2=FULL) — must be on for the rig's 0x17 keyer to
@@ -804,7 +805,9 @@ export default function App() {
  const wkBusyRef = useRef(false); // live "keyer is sending" flag, for the <LOGQSO> wait-then-log
  useEffect(() => { wkBusyRef.current = wkStatus.busy; }, [wkStatus.busy]);
  useEffect(() => {
-    const connected = cwSource === 'icom' ? (catState.backend === 'icom' && catState.connected) : wkStatus.connected;
+    const connected = cwSource === 'icom' ? (catState.backend === 'icom' && catState.connected)
+      : cwSource === 'flex' ? (catState.backend === 'flex' && catState.connected)
+      : wkStatus.connected;
    wkActiveRef.current = wkEnabled && connected;
  }, [wkEnabled, wkStatus.connected, cwSource, catState.backend, catState.connected]);
  useEffect(() => { wkEscClearsRef.current = wkEscClears; }, [wkEscClears]);
@@ -2036,7 +2039,7 @@ export default function App() {
      setWkMacros((s.macros ?? []) as WKMacro[]);
      setWkEscClears(s.esc_clears_call !== false);
      setWkSendOnType(!!s.send_on_type);
-      setWkEngine(s.engine === 'icom' ? 'icom' : 'winkeyer');
+      setWkEngine(s.engine === 'icom' ? 'icom' : s.engine === 'flex' ? 'flex' : 'winkeyer');
    } catch { /* keyer not configured */ }
  }, []);

@@ -2134,11 +2137,13 @@ export default function App() {
    const keyed = resolved ? resolved + ' ' : resolved;
    const doLog = /<LOGQSO>/i.test(rawText); // resolveCW strips the token (unknown var → "")
    const sleep = (ms: number) => new Promise((r) => window.setTimeout(r, ms));
-    if (cwSourceRef.current === 'icom') {
-      // The rig's keyer gives no busy echo back, so show the text we sent and,
-      // for <LOGQSO>, wait the estimated send duration before logging.
+    if (cwSourceRef.current === 'icom' || cwSourceRef.current === 'flex') {
+      // The rig keyer (Icom 0x17 / Flex CWX) gives no busy echo we track, so show
+      // the text we sent and, for <LOGQSO>, wait the estimated send duration
+      // before logging.
      setWkSent(resolved);
-      await IcomSendCW(keyed).catch((e) => setError(String(e?.message ?? e)));
+      const sendFn = cwSourceRef.current === 'flex' ? FlexSendCW : IcomSendCW;
+      await sendFn(keyed).catch((e) => setError(String(e?.message ?? e)));
      if (doLog) { await sleep(Math.round(estimateCwMs(resolved, wkWpm)) + 600); void save(); }
      return;
    }
@@ -2174,7 +2179,7 @@ export default function App() {
      // the wait at the ESTIMATED send time (not the busy flag alone): over a
      // remote/serial-over-IP link the "busy" status lags badly and stays stuck
      // true for tens of seconds, which made the next CQ fire ~120s late.
-      if (cwSourceRef.current === 'icom') {
+      if (cwSourceRef.current === 'icom' || cwSourceRef.current === 'flex') {
        await sleep(Math.round(estimateCwMs(resolveCW(m.text), wkWpm)) + 300);
      } else {
        const capMs = Math.round(estimateCwMs(resolveCW(m.text), wkWpm) * 1.4) + 2500;
@@ -2212,8 +2217,14 @@ export default function App() {
    writeUiPref('opslog.wkAutoCallSecs', String(v));
  }
  // send-on-type: key the typed chars verbatim (no variable substitution).
-  function wkSendRaw(chars: string) { WinkeyerSend(chars).catch(() => {}); }
-  function wkBackspace() { WinkeyerBackspace().catch(() => {}); }
+  function wkSendRaw(chars: string) {
+    if (cwSourceRef.current === 'flex') { FlexSendCW(chars).catch(() => {}); return; }
+    WinkeyerSend(chars).catch(() => {});
+  }
+  function wkBackspace() {
+    if (cwSourceRef.current === 'flex') { FlexBackspaceCW(1).catch(() => {}); return; }
+    WinkeyerBackspace().catch(() => {});
+  }
  function wkToggleSendOnType(on: boolean) { setWkSendOnType(on); saveWk({ send_on_type: on }); }

  // Resolve slot status for any spot we haven't seen yet — debounced so we
@@ -2880,7 +2891,14 @@ export default function App() {
        const keyerLive = wkActiveRef.current;
        // ESC aborts the current CW transmission AND the auto-call loop, so it
        // won't resend after the gap — you must click a CQ macro to restart it.
-        if (keyerLive) { stopAutoCall(); WinkeyerStop().catch(() => {}); }
+        // Route the abort to whichever engine is active (was WinKeyer-only, so
+        // ESC didn't stop the Icom or Flex keyer).
+        if (keyerLive) {
+          stopAutoCall();
+          if (cwSourceRef.current === 'icom') IcomStopCW().catch(() => {});
+          else if (cwSourceRef.current === 'flex') FlexStopCW().catch(() => {});
+          else WinkeyerStop().catch(() => {});
+        }
        if (!keyerLive || wkEscClearsRef.current) {
          resetEntry();
          callsignRef.current?.focus();
@@ -4406,8 +4424,8 @@ export default function App() {
          {wkEnabled && (
            <div className="w-[380px] shrink-0 min-h-0">
              <WinkeyerPanel
-                status={cwSource === 'icom'
-                  ? { connected: catState.backend === 'icom' && catState.connected, busy: false, wpm: wkWpm, version: 0, port: 'CI-V' }
+                status={cwSource === 'icom' || cwSource === 'flex'
+                  ? { connected: catState.backend === cwSource && catState.connected, busy: false, wpm: wkWpm, version: 0, port: cwSource === 'flex' ? 'CWX' : 'CI-V' }
                  : wkStatus}
                ports={wkPorts}
                port={wkPort}
@@ -4424,11 +4442,15 @@ export default function App() {
                onSetSpeed={(w) => {
                  setWkWpm(w); saveWk({ wpm: w });
                  if (cwSource === 'icom') IcomSetKeySpeed(w).catch(() => {});
+                  else if (cwSource === 'flex') FlexSetKeySpeed(w).catch(() => {});
                  else WinkeyerSetSpeed(w).catch(() => {});
                }}
                onSend={wkSend}
                onSendMacro={wkSendMacro}
-                onStop={() => { stopAutoCall(); if (cwSource === 'icom') IcomStopCW().catch(() => {}); else WinkeyerStop().catch(() => {}); }}
+                onStop={() => { stopAutoCall();
+                  if (cwSource === 'icom') IcomStopCW().catch(() => {});
+                  else if (cwSource === 'flex') FlexStopCW().catch(() => {});
+                  else WinkeyerStop().catch(() => {}); }}
                onClose={() => wkSetEnabled(false)}
                sendOnType={wkSendOnType}
                onToggleSendOnType={wkToggleSendOnType}
@@ -33,6 +33,37 @@ function pretty(name: string): string {
  return t.charAt(0).toUpperCase() + t.slice(1).toLowerCase();
 }

+// PortBtn is defined at MODULE scope on purpose. Defined inside AntGeniusPanel it
+// would be a new component *type* on every render, so React would unmount and
+// remount every port button each time the panel re-renders — harmless when that's
+// rare, but with the CW decoder running the parent re-renders many times a second
+// and the buttons were being torn down mid-click (mousedown and mouseup landing on
+// different element instances), so antenna changes silently did nothing.
+function PortBtn({ port, index, active, tx, onActivate, t }: {
+  port: 1 | 2; index: number; active: boolean; tx: boolean;
+  onActivate: (port: number, antenna: number) => void;
+  t: (key: string, vars?: Record<string, string | number>) => string;
+}) {
+  const letter = port === 1 ? 'A' : 'B';
+  const cls = tx
+    ? 'bg-gradient-to-b from-red-500 to-rose-600 text-white border-red-400/50 shadow-[0_0_10px_rgba(244,63,94,0.5)] animate-pulse'
+    : active
+      ? (port === 1
+        ? 'bg-gradient-to-b from-emerald-400 to-emerald-600 text-white border-emerald-300/60 shadow-[0_0_9px_rgba(16,185,129,0.45)]'
+        : 'bg-gradient-to-b from-sky-400 to-sky-600 text-white border-sky-300/60 shadow-[0_0_9px_rgba(14,165,233,0.45)]')
+      : 'bg-card text-muted-foreground border-border hover:bg-muted hover:text-foreground';
+  return (
+    <button
+      type="button"
+      onClick={() => onActivate(port, active ? 0 : index)}
+      title={active ? t('agp.portDeselect', { letter }) : t('agp.portSelect', { letter })}
+      className={cn('w-8 shrink-0 rounded-lg text-xs font-bold py-1.5 border transition-all active:scale-95', cls)}
+    >
+      {letter}
+    </button>
+  );
+}
+
 // AntGeniusPanel — antenna-switch widget for a 4O3A Antenna Genius, styled to
 // match the app's light theme with soft gradients + glows. Each antenna row has
 // a port-A button (left) and port-B button (right). Colours: green = selected on
@@ -61,27 +92,6 @@ export function AntGeniusPanel({ status, onActivate, onClose, band }: {
    if (filtered.length > 0) list = filtered;
  }

-  const PortBtn = ({ port, index, active, tx }: { port: 1 | 2; index: number; active: boolean; tx: boolean }) => {
-    const letter = port === 1 ? 'A' : 'B';
-    const cls = tx
-      ? 'bg-gradient-to-b from-red-500 to-rose-600 text-white border-red-400/50 shadow-[0_0_10px_rgba(244,63,94,0.5)] animate-pulse'
-      : active
-        ? (port === 1
-          ? 'bg-gradient-to-b from-emerald-400 to-emerald-600 text-white border-emerald-300/60 shadow-[0_0_9px_rgba(16,185,129,0.45)]'
-          : 'bg-gradient-to-b from-sky-400 to-sky-600 text-white border-sky-300/60 shadow-[0_0_9px_rgba(14,165,233,0.45)]')
-        : 'bg-card text-muted-foreground border-border hover:bg-muted hover:text-foreground';
-    return (
-      <button
-        type="button"
-        onClick={() => onActivate(port, active ? 0 : index)}
-        title={active ? t('agp.portDeselect', { letter }) : t('agp.portSelect', { letter })}
-        className={cn('w-8 shrink-0 rounded-lg text-xs font-bold py-1.5 border transition-all active:scale-95', cls)}
-      >
-        {letter}
-      </button>
-    );
-  };
-
  return (
    <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/40 shrink-0">
@@ -124,11 +134,11 @@ export function AntGeniusPanel({ status, onActivate, onClose, band }: {
                : 'bg-card/70 text-foreground/80 border-border hover:bg-muted/60';
          return (
            <div key={a.index} className="flex items-center gap-1.5">
-              <PortBtn port={1} index={a.index} active={aActive} tx={aTx} />
+              <PortBtn port={1} index={a.index} active={aActive} tx={aTx} onActivate={onActivate} t={t} />
              <div className={cn('flex-1 min-w-0 truncate text-center text-xs font-semibold tracking-wide rounded-lg px-2 py-1.5 border transition-all', nameCls)}>
                {pretty(a.name)}
              </div>
-              <PortBtn port={2} index={a.index} active={bActive} tx={bTx} />
+              <PortBtn port={2} index={a.index} active={bActive} tx={bTx} onActivate={onActivate} t={t} />
            </div>
          );
        })}
@@ -19,6 +19,7 @@ import {
  ListCountries, DXCCForCountry, DXCCName,
  PopulateBuiltinReferences, HasBuiltinReferences,
  ExportAwards, ImportAwards, InspectAwardImport, ApplyAwardImport, GetCatalogCodes, OpenAwardsFolder,
+  ExportAwardForCatalog,
  GetAwardUpdates, ApplyAwardUpdate, DismissAwardUpdate, ExplainAward,
 } from '../../wailsjs/go/main/App';

@@ -37,7 +38,7 @@ export type AwardDef = {
  or_rules?: AwardOrRule[];
  dxcc_filter: number[] | null; valid_bands?: string[]; valid_modes?: string[]; emission?: string[];
  confirm: string[] | null; validate?: string[] | null; grant_codes?: string; export_credit_granted?: boolean;
-  total: number; builtin?: boolean;
+  total: number; builtin?: boolean; version?: number;
 };

 type AwardOrRule = {
@@ -155,6 +156,9 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
  const [search, setSearch] = useState('');
  const [updating, setUpdating] = useState<string | null>(null);
  const [err, setErr] = useState('');
+  // Version to stamp into a "publish for catalog" export — defaults to one past
+  // the selected award's current version whenever the selection changes.
+  const [catVer, setCatVer] = useState('1');

  // The err banner doubles as a success/notice area (export path, import counts,
  // "populated N refs"). Auto-dismiss it after a few seconds so it doesn't stay
@@ -212,6 +216,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {

  const cur = defs[sel];
  const selUpdate = updates.find((u) => (u.code ?? '').toUpperCase() === (cur?.code ?? '').toUpperCase()) ?? null;
+  useEffect(() => { setCatVer(String((cur?.version ?? 0) + 1)); }, [cur?.code]);

  // ── Award tester: run the award's rules against a real QSO and show every step.
  type Rejected = { candidate: string; reason: string };
@@ -299,6 +304,19 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
      if (p) setErr(t('awed.exportedTo', { path: p }));
    } catch (e: any) { setErr(String(e?.message ?? e)); }
  }
+  // Export the SELECTED award as a catalog-ready JSON, stamped with a version, to
+  // paste over internal/award/catalog/<code>.json. A new release then ships it to
+  // the whole team (unedited copies auto-upgrade; edited ones are offered it).
+  async function exportForCatalog() {
+    setErr('');
+    if (!cur) return;
+    const v = Math.trunc(Number(catVer));
+    if (!Number.isFinite(v) || v < 1) { setErr(t('awed.catalogBadVersion')); return; }
+    try {
+      const p = await ExportAwardForCatalog(cur.code.trim().toUpperCase(), v);
+      if (p) setErr(t('awed.catalogExportedTo', { path: p }));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
+  }
  // Import: LOOK FIRST, then ask.
  //
  // This used to merge by code with "imported wins", silently — import a WAPC
@@ -352,7 +370,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {

  return (
    <Dialog open={open} onOpenChange={(o) => { if (!o) onClose(); }}>
-      <DialogContent className="max-w-5xl max-h-[92vh] grid grid-rows-[auto_1fr_auto] gap-0 p-0">
+      <DialogContent className="max-w-6xl w-[95vw] max-h-[92vh] grid grid-rows-[auto_1fr_auto] gap-0 p-0">
        <DialogHeader className="px-5 py-3 border-b">
          <DialogTitle>{t('awed.awardManagement')}</DialogTitle>
        </DialogHeader>
@@ -726,6 +744,18 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
            title={t('awed.awardsFolderTip')}>
            <FolderOpen className="size-3.5 mr-1" /> {t('awed.awardsFolder')}
          </Button>
+          {/* Publish the selected award to the catalog: stamp a version and write a
+              file to paste over internal/award/catalog/<code>.json, so a release
+              ships your change to the whole team. */}
+          {cur && (
+            <div className="flex items-center gap-1" title={t('awed.catalogPublishTip')}>
+              <input type="number" min={1} value={catVer} onChange={(e) => setCatVer(e.target.value)}
+                className="h-8 w-14 rounded border border-input bg-background px-1.5 text-xs font-mono" />
+              <Button variant="outline" onClick={exportForCatalog}>
+                <Download className="size-3.5 mr-1" /> {t('awed.catalogPublish')}
+              </Button>
+            </div>
+          )}
          <div className="flex-1" />
          <Button variant="outline" onClick={onClose}>{t('awed.cancel')}</Button>
          <Button onClick={save}><Save className="size-3.5 mr-1" /> {t('awed.save')}</Button>
@@ -3,7 +3,7 @@ import {
  ArrowDown, ArrowUp, ArrowLeft, ArrowRight, Copy, Plus, Star, StarOff, Trash2,
  ChevronDown, ChevronRight,
  User, Database, Radio, Cog, Server, Award, Antenna as AntennaIcon,
-  Compass, Wifi, Construction, UploadCloud, Loader2, FolderOpen, Play, Power, Check, Eye, EyeOff,
+  Compass, Wifi, Construction, UploadCloud, Loader2, FolderOpen, Play, Power, Check, Eye, EyeOff, Pencil,
 } from 'lucide-react';
 import {
  GetLookupSettings, SaveLookupSettings, ClearLookupCache, TestLookupProvider,
@@ -28,7 +28,7 @@ import {
  ConnectClusterServer, DisconnectClusterServer,
  ConnectAllClusters, DisconnectAllClusters, GetClusterStatus,
  GetBackupSettings, SaveBackupSettings, RunBackupNow, PickBackupFolder,
-  GetDatabaseSettings, PickOpenDatabase, PickSaveDatabase, OpenDatabase, MoveDatabase, ResetDatabaseToDefault, RestartApp, CreateDatabase,
+  GetDatabaseSettings, PickOpenDatabase, PickSaveDatabase, OpenDatabase, MoveDatabase, ResetDatabaseToDefault, RestartApp, CreateDatabase, RenameDatabase,
  GetMySQLSettings, SaveMySQLSettings, TestMySQLConnection, GetDBBackendStatus,
  GetAutostartPrograms, SaveAutostartPrograms, BrowseExecutable, LaunchAutostartProgram,
  GetTelemetryEnabled, SetTelemetryEnabled,
@@ -276,7 +276,7 @@ const SECTION_LABELS: Partial<Record<SectionId, string>> = {
  winkeyer: 'CW Keyer',
  antenna: 'Ultrabeam / Steppir',
  antgenius: 'Antenna Genius',
-  pgxl: 'Power Genius',
+  pgxl: 'Amplifier',
  flex: 'FlexRadio',
  relayauto: 'Relay auto-control',
  audio: 'Audio devices',
@@ -647,7 +647,7 @@ function ADIFMonitorPanel() {
 type RelayRuleUI = { device_id: string; relay: number; mode: string; freq_lo_khz: number; freq_hi_khz: number; bands: string[] };
 type StationDevUI = { id: string; type: string; name: string; labels: string[] };
 const RELAY_BANDS = ['160m', '80m', '60m', '40m', '30m', '20m', '17m', '15m', '12m', '10m', '6m', '4m', '2m', '70cm'];
-const relayCountUI = (type: string) => (type === 'kmtronic' ? 8 : 5);
+const relayCountUI = (type: string) => (type === 'kmtronic' || type === 'denkovi' ? 8 : 5);
 function RelayAutoPanel() {
  const { t } = useI18n();
  const [enabled, setEnabled] = useState(false);
@@ -698,7 +698,7 @@ function RelayAutoPanel() {
        <div key={dev.id} className="rounded-md border border-border">
          <div className="px-3 py-1.5 border-b border-border bg-muted/40 text-xs font-semibold">{dev.name || dev.id}</div>
          <div className="divide-y divide-border/60">
-            {Array.from({ length: relayCountUI(dev.type) }, (_, i) => i + 1).map((relay) => {
+            {Array.from({ length: (dev.labels?.length || relayCountUI(dev.type)) }, (_, i) => i + 1).map((relay) => {
              const r = ruleFor(dev.id, relay);
              const label = (dev.labels?.[relay - 1] || '').trim() || `${t('relayauto.relay')} ${relay}`;
              return (
@@ -1013,8 +1013,9 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
  // Antenna Genius (4O3A) switch settings — TCP port is fixed at 9007.
  const [antgenius, setAntgenius] = useState<{ enabled: boolean; host: string; password: string }>({ enabled: false, host: '', password: '' });

-  // PowerGenius XL (4O3A) amp fan-control settings.
-  const [pgxl, setPgxl] = useState<{ enabled: boolean; host: string; port: number }>({ enabled: false, host: '', port: 9008 });
+  // Amplifier control settings (PowerGenius XL over TCP; SPE Expert over serial/IP).
+  const [pgxl, setPgxl] = useState<{ enabled: boolean; type: string; transport: string; host: string; port: number; com_port: string; baud: number }>(
+    { enabled: false, type: 'pgxl', transport: 'tcp', host: '', port: 9008, com_port: '', baud: 115200 });

  // WinKeyer CW keyer settings + macro editor.
  type WKMac = { label: string; text: string };
@@ -2645,36 +2646,89 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
  }

  function PGXLPanelSettings() {
+    const isPGXL = pgxl.type === 'pgxl';
+    const isSerial = pgxl.transport === 'serial';
    return (
      <>
-        <SectionHeader
-          title="Power Genius XL"
-        />
+        <SectionHeader title="Amplifier" />
        <div className="space-y-4 max-w-xl">
          <label className="flex items-center gap-2 text-sm cursor-pointer">
            <Checkbox checked={pgxl.enabled} onCheckedChange={(c) => setPgxl((s) => ({ ...s, enabled: !!c }))} />
-            Enable PowerGenius fan control
+            Enable amplifier control
          </label>
-          <div className="grid grid-cols-3 gap-3">
-            <div className="space-y-1 col-span-2">
-              <Label>Host / IP</Label>
-              <Input
-                value={pgxl.host ?? ''}
-                onChange={(e) => setPgxl((s) => ({ ...s, host: e.target.value }))}
-                placeholder="192.168.1.70"
-                className="font-mono"
-              />
-            </div>
+
+          <div className="grid grid-cols-2 gap-3">
            <div className="space-y-1">
-              <Label>TCP port</Label>
-              <Input
-                type="number" min={1} max={65535}
-                value={pgxl.port}
-                onChange={(e) => setPgxl((s) => ({ ...s, port: parseInt(e.target.value) || 9008 }))}
-                className="font-mono"
-              />
+              <Label>Amplifier</Label>
+              <Select value={pgxl.type} onValueChange={(v) => setPgxl((s) => ({ ...s, type: v, transport: v === 'pgxl' ? 'tcp' : s.transport }))}>
+                <SelectTrigger className="h-9"><SelectValue /></SelectTrigger>
+                <SelectContent>
+                  <SelectItem value="pgxl">4O3A PowerGenius XL</SelectItem>
+                  <SelectItem value="spe13">SPE Expert 1.3K-FA</SelectItem>
+                  <SelectItem value="spe15">SPE Expert 1.5K-FA</SelectItem>
+                  <SelectItem value="spe2k">SPE Expert 2K-FA</SelectItem>
+                </SelectContent>
+              </Select>
            </div>
+            {/* PowerGenius is TCP-only; SPE amps connect over USB serial or an
+                RS232-to-Ethernet bridge, so they offer both. */}
+            {!isPGXL && (
+              <div className="space-y-1">
+                <Label>Connection</Label>
+                <Select value={pgxl.transport} onValueChange={(v) => setPgxl((s) => ({ ...s, transport: v }))}>
+                  <SelectTrigger className="h-9"><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    <SelectItem value="serial">USB (serial COM)</SelectItem>
+                    <SelectItem value="tcp">Network (RS232-to-Ethernet)</SelectItem>
+                  </SelectContent>
+                </Select>
+              </div>
+            )}
          </div>
+
+          {isSerial ? (
+            <div className="grid grid-cols-3 gap-3">
+              <div className="space-y-1 col-span-2">
+                <Label>COM port</Label>
+                <div className="flex items-center gap-2">
+                  <Select value={pgxl.com_port || '_'} onValueChange={(v) => setPgxl((s) => ({ ...s, com_port: v === '_' ? '' : v }))}>
+                    <SelectTrigger className="h-9 flex-1"><SelectValue placeholder="— COM —" /></SelectTrigger>
+                    <SelectContent>
+                      {wkPorts.length === 0 && <SelectItem value="_" disabled>No ports found</SelectItem>}
+                      {wkPorts.map((p) => <SelectItem key={p} value={p}>{p}</SelectItem>)}
+                    </SelectContent>
+                  </Select>
+                  <Button size="sm" variant="outline" className="h-9" onClick={() => ListSerialPorts().then((p) => setWkPorts((p ?? []) as string[])).catch(() => {})}>
+                    <ArrowDown className="size-3.5 rotate-90" />
+                  </Button>
+                </div>
+              </div>
+              <div className="space-y-1">
+                <Label>Baud</Label>
+                <Input type="number" min={1200} value={pgxl.baud}
+                  onChange={(e) => setPgxl((s) => ({ ...s, baud: parseInt(e.target.value) || 115200 }))} className="font-mono" />
+              </div>
+            </div>
+          ) : (
+            <div className="grid grid-cols-3 gap-3">
+              <div className="space-y-1 col-span-2">
+                <Label>Host / IP</Label>
+                <Input value={pgxl.host ?? ''} onChange={(e) => setPgxl((s) => ({ ...s, host: e.target.value }))}
+                  placeholder="192.168.1.70" className="font-mono" />
+              </div>
+              <div className="space-y-1">
+                <Label>TCP port</Label>
+                <Input type="number" min={1} max={65535} value={pgxl.port}
+                  onChange={(e) => setPgxl((s) => ({ ...s, port: parseInt(e.target.value) || 9008 }))} className="font-mono" />
+              </div>
+            </div>
+          )}
+
+          {!isPGXL && (
+            <p className="text-xs text-warning">
+              SPE Expert control is not wired up yet — these settings are saved, but OpsLog can't command the amp until its serial protocol is implemented.
+            </p>
+          )}
        </div>
      </>
    );
@@ -2807,6 +2861,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                <SelectContent>
                  <SelectItem value="winkeyer">WinKeyer (serial)</SelectItem>
                  <SelectItem value="icom">Icom CI-V (rig keyer)</SelectItem>
+                  <SelectItem value="flex">FlexRadio (CWX)</SelectItem>
                  <SelectItem value="tci" disabled>TCI (coming soon)</SelectItem>
                </SelectContent>
              </Select>
@@ -2837,6 +2892,26 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                </div>
              </div>
            </>
+          ) : wk.engine === 'flex' ? (
+            <>
+              <p className="text-xs text-muted-foreground -mt-2">
+                FlexRadio keys CW through the radio's <strong>CWX</strong> keyer over the existing SmartSDR CAT connection — no WinKeyer or SmartCAT needed. It reuses the connection set in Settings → CAT, so there's nothing else to wire up here. Put a slice in CW mode. Only the speed is set from here; weight, sidetone and break-in are configured on the radio (break-in must be on for CW to actually transmit).
+              </p>
+              {(!catCfg.enabled || catCfg.backend !== 'flex') && (
+                <p className="text-xs font-medium text-warning -mt-1 flex items-start gap-1.5">
+                  <span aria-hidden>⚠</span>
+                  <span>
+                    Your CAT backend is set to <strong>{catCfg.enabled ? (catCfg.backend || 'none') : 'disabled'}</strong>. Flex CWX needs the CAT backend set to <strong>FlexRadio</strong> and connected — change it under Settings → CAT interface, otherwise sending CW will fail.
+                  </span>
+                </p>
+              )}
+              <div className="grid grid-cols-4 gap-3">
+                <div className="space-y-1">
+                  <Label>Speed (WPM)</Label>
+                  <Input type="number" min={6} max={48} value={wk.wpm} onChange={(e) => setWkField({ wpm: num(e.target.value, 25) })} className="font-mono" />
+                </div>
+              </div>
+            </>
          ) : (
            <>
              <div className="grid grid-cols-4 gap-3">
@@ -3978,6 +4053,17 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
        setDbMsg(p);
      } catch (e: any) { setErr(String(e?.message ?? e)); }
    }
+    // Rename the CURRENT database (keeps all config), unlike New database which
+    // starts empty. The old file is removed on the next launch.
+    async function renameDb() {
+      try {
+        const p = await PickSaveDatabase();
+        if (!p) return;
+        await RenameDatabase(p);
+        await refreshDb();
+        setDbMsg(p);
+      } catch (e: any) { setErr(String(e?.message ?? e)); }
+    }
    async function resetDefault() {
      try {
        await ResetDatabaseToDefault();
@@ -4056,6 +4142,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
          <div className="flex flex-wrap gap-2">
            <Button size="sm" onClick={createNew}><Plus className="size-3.5" /> {t('db.newDb')}</Button>
            <Button variant="outline" size="sm" onClick={openExisting}><FolderOpen className="size-3.5" /> {t('db.openExisting')}</Button>
+            <Button variant="outline" size="sm" onClick={renameDb} title={t('db.renameTip')}><Pencil className="size-3.5" /> {t('db.rename')}</Button>
            <Button variant="outline" size="sm" onClick={saveCopy}><Copy className="size-3.5" /> {t('db.saveCopy')}</Button>
            {dbSettings.is_custom && <Button variant="ghost" size="sm" onClick={resetDefault}>{t('db.resetDefault')}</Button>}
          </div>
@@ -12,16 +12,22 @@ import {
  GetStationDevices, SaveStationDevices, GetStationStatus, StationSetRelay,
  GetRotatorHeading, RotatorGoTo, RotatorStop,
  GetUltrabeamStatus, SetUltrabeamDirection, UltrabeamRetract, MotorSetElement, MotorReadElements,
+  ListDenkoviDevices, ListSerialPorts,
 } from '../../wailsjs/go/main/App';

 type RotatorProps = { centerLat?: number | null; centerLon?: number | null; bearing?: number | null };

-type Device = { id: string; type: string; name: string; host: string; user?: string; pass?: string; labels: string[] };
+type Device = { id: string; type: string; name: string; host: string; user?: string; pass?: string; channels?: number; labels: string[] };
 type Relay = { number: number; label: string; on: boolean };
 type DevStatus = { id: string; name: string; type: string; connected: boolean; error?: string; relays: Relay[] };

-const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8 };
-const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay' };
+const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8 };
+const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)' };
+
+// Relay count for a configured device: fixed by type, except Denkovi (4/8) and
+// the generic USB-serial board, whose channel count the user picks.
+const chanCount = (d: Device): number =>
+  (d.type === 'denkovi' || d.type === 'usbrelay') ? (d.channels && d.channels >= 1 ? d.channels : 8) : (RELAY_COUNT[d.type] ?? 5);

 function blankDevice(): Device {
  return { id: '', type: 'webswitch', name: '', host: '', user: '', pass: '', labels: Array(5).fill('') };
@@ -445,11 +451,39 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
  const ref = useRef<HTMLDivElement>(null);
  useEffect(() => { ref.current?.scrollIntoView({ behavior: 'smooth', block: 'nearest' }); }, []);
  const setType = (type: string) => {
-    const n = RELAY_COUNT[type] ?? 5;
+    const channels = (type === 'denkovi' || type === 'usbrelay') ? (device.channels || 8) : undefined;
+    const n = chanCount({ ...device, type, channels });
    const labels = Array.from({ length: n }, (_, i) => device.labels[i] ?? '');
-    onChange({ ...device, type, labels });
+    onChange({ ...device, type, channels, labels });
+  };
+  const setChannels = (channels: number) => {
+    const n = chanCount({ ...device, channels });
+    const labels = Array.from({ length: n }, (_, i) => device.labels[i] ?? '');
+    onChange({ ...device, channels, labels });
  };
  const isKM = device.type === 'kmtronic';
+  const isDenkovi = device.type === 'denkovi';
+  const isUsbRelay = device.type === 'usbrelay';
+  // COM ports for the generic USB-serial relay picker.
+  const [serialPorts, setSerialPorts] = useState<string[]>([]);
+  useEffect(() => {
+    if (!isUsbRelay) return;
+    ListSerialPorts().then((p) => setSerialPorts((p ?? []) as string[])).catch(() => setSerialPorts([]));
+  }, [isUsbRelay]);
+  // Detected FTDI serials for the Denkovi picker.
+  const [denkoviSerials, setDenkoviSerials] = useState<string[]>([]);
+  const [detecting, setDetecting] = useState(false);
+  const detectDenkovi = async () => {
+    setDetecting(true);
+    try {
+      const list = ((await ListDenkoviDevices()) ?? []) as string[];
+      setDenkoviSerials(list);
+      // Auto-fill when there's exactly one and nothing chosen yet.
+      if (list.length >= 1 && !device.host.trim()) onChange({ ...device, host: list[0] });
+    } catch { setDenkoviSerials([]); }
+    finally { setDetecting(false); }
+  };
+  useEffect(() => { if (isDenkovi) void detectDenkovi(); /* eslint-disable-next-line */ }, [isDenkovi]);
  return (
    <div ref={ref} className="mt-4 max-w-4xl rounded-xl border border-primary/40 bg-card p-4 space-y-3">
      <div className="text-sm font-semibold">{device.id ? t('station.editDevice') : t('station.addDevice')}</div>
@@ -461,6 +495,8 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
            <SelectContent>
              <SelectItem value="webswitch">WebSwitch 1216H (5 relays)</SelectItem>
              <SelectItem value="kmtronic">KMTronic 8-relay (LAN)</SelectItem>
+              <SelectItem value="denkovi">Denkovi USB (FT245 / D2XX)</SelectItem>
+              <SelectItem value="usbrelay">Denkovi USB (serial / COM)</SelectItem>
            </SelectContent>
          </Select>
        </div>
@@ -469,6 +505,54 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
          <Input value={device.name} placeholder={TYPE_LABEL[device.type]} onChange={(e) => onChange({ ...device, name: e.target.value })} />
        </div>
      </div>
+      {(isDenkovi || isUsbRelay) && (
+        <div className="space-y-1 max-w-[10rem]">
+          <Label>{t('station.channels')}</Label>
+          <Select value={String(chanCount(device))} onValueChange={(v) => setChannels(parseInt(v, 10))}>
+            <SelectTrigger className="h-9"><SelectValue /></SelectTrigger>
+            <SelectContent>
+              {(isDenkovi ? [4, 8] : [1, 2, 4, 8, 16]).map((n) => (
+                <SelectItem key={n} value={String(n)}>{n}</SelectItem>
+              ))}
+            </SelectContent>
+          </Select>
+        </div>
+      )}
+      {isDenkovi ? (
+        <div className="space-y-1 max-w-md">
+          <Label>{t('station.ftdiSerial')}</Label>
+          <div className="flex items-center gap-2">
+            <Input className="font-mono flex-1" value={device.host} placeholder="DAE0006K"
+              list="denkovi-serials"
+              onChange={(e) => onChange({ ...device, host: e.target.value })} />
+            <datalist id="denkovi-serials">
+              {denkoviSerials.map((s) => <option key={s} value={s} />)}
+            </datalist>
+            <Button size="sm" variant="outline" onClick={detectDenkovi} disabled={detecting}>
+              {detecting ? <Loader2 className="size-3.5 mr-1 animate-spin" /> : <RefreshCw className="size-3.5 mr-1" />}
+              {t('station.detect')}
+            </Button>
+          </div>
+          <p className="text-[10px] text-muted-foreground">{t('station.ftdiHint')}</p>
+        </div>
+      ) : isUsbRelay ? (
+        <div className="space-y-1 max-w-md">
+          <Label>{t('station.comPort')}</Label>
+          <div className="flex items-center gap-2">
+            <Select value={device.host || '_'} onValueChange={(v) => onChange({ ...device, host: v === '_' ? '' : v })}>
+              <SelectTrigger className="h-9 flex-1"><SelectValue placeholder="— COM —" /></SelectTrigger>
+              <SelectContent>
+                {serialPorts.length === 0 && <SelectItem value="_" disabled>{t('station.noPorts')}</SelectItem>}
+                {serialPorts.map((p) => <SelectItem key={p} value={p}>{p}</SelectItem>)}
+              </SelectContent>
+            </Select>
+            <Button size="sm" variant="outline" onClick={() => ListSerialPorts().then((p) => setSerialPorts((p ?? []) as string[])).catch(() => {})}>
+              <RefreshCw className="size-3.5" />
+            </Button>
+          </div>
+          <p className="text-[10px] text-muted-foreground">{t('station.usbRelayHint')}</p>
+        </div>
+      ) : (
      <div className={cn('grid gap-3', isKM ? 'grid-cols-3' : 'grid-cols-1')}>
        <div className={cn('space-y-1', isKM ? '' : 'max-w-xs')}>
          <Label>{t('station.host')}</Label>
@@ -487,6 +571,7 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
          </>
        )}
      </div>
+      )}
      <div className="space-y-1">
        <Label>{t('station.labels')}</Label>
        <div className="grid grid-cols-4 gap-2">
@@ -26,7 +26,7 @@ interface Props {
  wpm: number;
  macros: WKMacro[];
  sent: string; // text echoed back by the keyer as it transmits
-  source: 'winkeyer' | 'icom';               // CW output engine (chosen in Settings → CW Keyer)
+  source: 'winkeyer' | 'icom' | 'flex';      // CW output engine (chosen in Settings → CW Keyer)
  breakIn?: number;                          // Icom CW break-in: 0=OFF, 1=SEMI, 2=FULL
  onSetBreakIn?: (mode: number) => void;
  onSelectPort: (p: string) => void;
@@ -101,14 +101,16 @@ export function WinkeyerPanel({
        <Radio className="size-4 text-primary shrink-0" />
        {/* CW output engine (chosen in Settings → CW Keyer). */}
        <span className="text-xs font-semibold uppercase tracking-wider text-muted-foreground shrink-0">
-          {source === 'icom' ? 'Icom CW' : 'WinKeyer'}
+          {source === 'icom' ? 'Icom CW' : source === 'flex' ? 'Flex CWX' : 'WinKeyer'}
        </span>
        <span className={cn('size-2 rounded-full', connected ? (status.busy ? 'bg-warning animate-pulse' : 'bg-success') : 'bg-muted-foreground/40')}
          title={connected ? (status.busy ? t('wkp.sending') : t('wkp.connectedV', { version: status.version })) : t('wkp.disconnected')} />
        <div className="flex-1" />
-        {source === 'icom' ? (
+        {source === 'icom' || source === 'flex' ? (
          <span className="text-[11px] font-medium text-muted-foreground">
-            {connected ? t('wkp.civReady') : t('wkp.civOffline')}
+            {source === 'flex'
+              ? (connected ? t('wkp.cwxReady') : t('wkp.cwxOffline'))
+              : (connected ? t('wkp.civReady') : t('wkp.civOffline'))}
          </span>
        ) : !connected ? (
          <>
@@ -183,7 +185,7 @@ export function WinkeyerPanel({
          <div className="flex flex-col flex-1 min-w-0">
            <Label className="mb-1 h-3.5 text-xs flex items-center gap-2">
              {t('wkp.cwText')}
-              {source === 'winkeyer' && (
+              {(source === 'winkeyer' || source === 'flex') && (
                <label className="flex items-center gap-1 text-[10px] font-normal cursor-pointer text-muted-foreground"
                  title={t('wkp.sendOnTypeHint')}>
                  <input type="checkbox" className="accent-primary" checked={sendOnType}
@@ -131,9 +131,9 @@ const en: Dict = {
  'uscty.backfillIntro': 'Resolve county (and grid) for US QSOs already in your log that are missing them. Existing values are kept — only blanks are filled.',
  'uscty.backfillRun': 'Fill missing counties',
  'uscty.backfillDone': '{s} US QSOs scanned · {c} counties, {g} grids filled.',
-  'station.title': 'Station Control', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'No heading read', 'station.pattern': 'Pattern', 'station.bi': 'Bi', 'station.retract': 'Retract elements', 'station.moving': 'MOVING', 'station.elements': 'Elements (mm)', 'station.read': 'Read', 'station.readLengths': 'Read current element lengths from the controller', 'station.noLengths': 'Lengths unknown — click Read to fetch them from the controller.', 'station.element': 'Element', 'station.reflector': 'Reflector', 'station.driven': 'Driven', 'station.director': 'Dir', 'station.set': 'Set', 'station.elementsHint': 'Each press lengthens/shortens the element by 2 mm (like the physical console). Verify which element responds on your antenna.', 'station.setExactLen': 'Click to type the exact current length (fixes the baseline if the auto-read is off).', 'station.atMax': 'Controller refused — the element is likely at its maximum length for this band, so it can\'t extend further.', 'station.go': 'Go', 'station.stop': 'Stop', 'station.dragHint': 'Drag a widget by its card to reorder. Pick a column count to lay them out in a grid.', 'station.colsAuto': 'Auto', 'station.addDevice': 'Add device', 'station.editDevice': 'Edit device', 'station.empty': 'No relay boards yet. Add a WebSwitch 1216H or a KMTronic 8-relay board to control your station power and accessories.', 'station.online': 'Online', 'station.offline': 'Offline', 'station.edit': 'Edit', 'station.delete': 'Delete', 'station.relay': 'Relay', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': 'Device type', 'station.name': 'Name', 'station.host': 'Host / IP', 'station.user': 'Username', 'station.pass': 'Password', 'station.optional': 'optional', 'station.labels': 'Relay labels', 'station.cancel': 'Cancel', 'station.save': 'Save',
+  'station.title': 'Station Control', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'No heading read', 'station.pattern': 'Pattern', 'station.bi': 'Bi', 'station.retract': 'Retract elements', 'station.moving': 'MOVING', 'station.elements': 'Elements (mm)', 'station.read': 'Read', 'station.readLengths': 'Read current element lengths from the controller', 'station.noLengths': 'Lengths unknown — click Read to fetch them from the controller.', 'station.element': 'Element', 'station.reflector': 'Reflector', 'station.driven': 'Driven', 'station.director': 'Dir', 'station.set': 'Set', 'station.elementsHint': 'Each press lengthens/shortens the element by 2 mm (like the physical console). Verify which element responds on your antenna.', 'station.setExactLen': 'Click to type the exact current length (fixes the baseline if the auto-read is off).', 'station.atMax': 'Controller refused — the element is likely at its maximum length for this band, so it can\'t extend further.', 'station.go': 'Go', 'station.stop': 'Stop', 'station.dragHint': 'Drag a widget by its card to reorder. Pick a column count to lay them out in a grid.', 'station.colsAuto': 'Auto', 'station.addDevice': 'Add device', 'station.editDevice': 'Edit device', 'station.empty': 'No relay boards yet. Add a WebSwitch 1216H or a KMTronic 8-relay board to control your station power and accessories.', 'station.online': 'Online', 'station.offline': 'Offline', 'station.edit': 'Edit', 'station.delete': 'Delete', 'station.relay': 'Relay', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': 'Device type', 'station.name': 'Name', 'station.host': 'Host / IP', 'station.user': 'Username', 'station.pass': 'Password', 'station.optional': 'optional', 'station.ftdiSerial': 'FTDI serial number', 'station.detect': 'Detect', 'station.ftdiHint': 'The Denkovi board is driven via FTDI bit-bang (not the COM port). Pick its serial (e.g. DAE0006K). Needs the FTDI D2XX driver installed.', 'station.channels': 'Relays', 'station.comPort': 'COM port', 'station.noPorts': 'No ports found', 'station.usbRelayHint': 'Cheap USB-serial relay boards (CH340/LCUS) using the A0 command protocol. If yours does not switch, tell me its model / command set.', 'station.labels': 'Relay labels', 'station.cancel': 'Cancel', 'station.save': 'Save',
  'sec.awards': 'Awards', 'sec.cat': 'CAT interface', 'sec.rotator': 'Rotator', 'sec.winkeyer': 'CW Keyer',
-  'sec.antenna': 'Ultrabeam / Steppir', 'sec.antgenius': 'Antenna Genius', 'sec.pgxl': 'Power Genius', 'sec.flex': 'FlexRadio', 'sec.audio': 'Audio devices',
+  'sec.antenna': 'Ultrabeam / Steppir', 'sec.antgenius': 'Antenna Genius', 'sec.pgxl': 'Amplifier', 'sec.flex': 'FlexRadio', 'sec.audio': 'Audio devices',
  'sec.relayauto': 'Relay auto-control',
  'relayauto.hint': 'Automatically switch Station Control relays from the rig frequency / band (like PstRotator). Each relay: a frequency window (ON inside, OFF outside) or a set of bands. Relays are set up in the Station Control panel.',
  'relayauto.enable': 'Enable relay auto-control',
@@ -244,7 +244,7 @@ const en: Dict = {
  'db.backend': 'Backend', 'db.configLocal': 'settings stay in the local SQLite file', 'db.connectUse': 'Connect & use',
  'db.savedRestart': 'Saved. Restart OpsLog to open this logbook:', 'db.restartNow': 'Restart OpsLog', 'db.restartHint': '(reopens automatically)',
  'db.current': 'Current database', 'db.customLoc': '(custom location)', 'db.default': '(default)', 'db.defaultLabel': 'Default:',
-  'db.newDb': 'New database…', 'db.openExisting': 'Open existing…', 'db.saveCopy': 'Save a copy & switch…', 'db.resetDefault': 'Reset to default', 'db.quitNow': 'Quit now',
+  'db.newDb': 'New database…', 'db.openExisting': 'Open existing…', 'db.saveCopy': 'Save a copy & switch…', 'db.rename': 'Rename…', 'db.renameTip': 'Rename this database (keeps all your config). The old file is removed on the next launch.', 'db.resetDefault': 'Reset to default', 'db.quitNow': 'Quit now',
  'db.host': 'Host', 'db.port': 'Port', 'db.database': 'Database', 'db.user': 'User', 'db.testCreate': 'Test & create database', 'db.testing': 'Testing…', 'db.connectedReady': 'Connected — database ready ✓', 'db.failed': 'Failed: ',
  'db.mysqlHint': 'Several OpsLog instances pointed at one MySQL database see each other\'s QSOs live (refreshed every 2 s). Test & create the database, then Save & switch logbook above to start logging there.',
  'db.dataLocation': 'Data location', 'db.currentDataDir': 'Current data directory',
@@ -275,7 +275,7 @@ const en: Dict = {
  'adx.introPart1': 'Every ADIF 3.1.7 field not shown in the other tabs. Pick a field to add it, or type a custom/vendor tag (e.g. ', 'adx.introPart2': '). Stored losslessly and exported in the ', 'adx.fullMode': 'full', 'adx.introPart3': ' ADIF mode.', 'adx.addFieldPh': 'Add ADIF field…', 'adx.showDeprecated': 'Show deprecated', 'adx.noExtra': 'No extra ADIF fields. Use the picker above to add one.', 'adx.deprecated': 'deprecated', 'adx.intl': 'intl', 'adx.nonStandard': 'non-standard', 'adx.removeField': 'Remove field',
  // Hardware panels (winkeyer / dvk / antgenius / flex / icom)
  'wkp.sending': 'Sending…', 'wkp.connectedV': 'Connected (v{version})', 'wkp.disconnected': 'Disconnected', 'wkp.comPort': 'COM port', 'wkp.noPorts': 'No ports', 'wkp.refreshPorts': 'Refresh ports', 'wkp.connect': 'Connect', 'wkp.disconnect': 'Disconnect', 'wkp.hide': 'Hide / disable WinKeyer',
-  'wkp.sourceHint': 'CW output: WK = WinKeyer hardware · CI-V = the Icom rig’s own keyer (over CAT, no extra hardware)', 'wkp.civReady': 'Icom CI-V ready', 'wkp.civOffline': 'Icom not connected (Settings → CAT)',
+  'wkp.sourceHint': 'CW output: WK = WinKeyer hardware · CI-V = the Icom rig’s own keyer (over CAT, no extra hardware)', 'wkp.civReady': 'Icom CI-V ready', 'wkp.civOffline': 'Icom not connected (Settings → CAT)', 'wkp.cwxReady': 'Flex CWX ready', 'wkp.cwxOffline': 'Flex not connected (Settings → CAT)',
  'wkp.cwSpeed': 'CW speed (WPM)', 'wkp.faster': 'Faster', 'wkp.slower': 'Slower', 'wkp.cwText': 'CW text', 'wkp.sendOnTypeHint': 'Key each character live as you type (backspace removes un-sent chars)', 'wkp.sendOnType': 'send on type', 'wkp.phLive': 'Type — sent live…', 'wkp.phEnter': 'Type and press Enter to send…', 'wkp.clear': 'Clear', 'wkp.send': 'Send', 'wkp.abort': 'Abort (clear keyer buffer)', 'wkp.stop': 'Stop',
  'wkp.breakIn': 'Break-in', 'wkp.breakInHint': "The rig's CW keyer only transmits when break-in is SEMI or FULL. OFF keys the sidetone but stays in receive.", 'wkp.bkOff': 'OFF', 'wkp.bkOffWarn': "won't transmit — set SEMI or FULL",
  'wkp.autoCallHint': 'Click a CQ macro (one whose text contains CQ) to resend it on a loop — message, gap, repeat — until you send another macro (e.g. a report), press Stop, or hit ESC. Non-CQ macros send once.', 'wkp.autoCall': 'Auto-call', 'wkp.gap': 'gap', 'wkp.gapHint': 'Seconds to wait after the message before resending', 'wkp.loopHint': 'click a CQ macro to loop it', 'wkp.macroN': 'Macro {n}',
@@ -307,6 +307,10 @@ const en: Dict = {
  'awed.builtin': 'Built-in',
  'awed.awardsFolder': 'Awards folder',
  'awed.awardsFolderTip': 'Every award you create is saved here as JSON, automatically. To share one, send the file. To receive one, use Import.',
+  'awed.catalogPublish': 'Publish to catalog…',
+  'awed.catalogPublishTip': 'Export this award as a catalog file (with the version on the left), to paste over internal/award/catalog/<code>.json. A new release then ships it to the whole team — copies nobody edited auto-upgrade, edited ones are offered it.',
+  'awed.catalogExportedTo': 'Catalog file written to:\n{path}\n\nPaste it over internal/award/catalog/<code>.json, then build and release.',
+  'awed.catalogBadVersion': 'Enter a version number (1 or more).',
  'awed.builtinTip': 'Tick before shipping this award in the catalog. Left off, a “Reset to defaults” DELETES it on the user machine — even though you shipped it.',
  'awed.protectedFlag': 'Protected',
  'awed.protectedTip': 'Protected awards cannot be deleted from the editor.',
@@ -440,9 +444,9 @@ const fr: Dict = {
  'uscty.backfillIntro': "Résout le comté (et le locator) pour les QSO US déjà dans ton log qui n'en ont pas. Les valeurs existantes sont conservées — seuls les vides sont remplis.",
  'uscty.backfillRun': 'Remplir les comtés manquants',
  'uscty.backfillDone': '{s} QSO US analysés · {c} comtés, {g} locators remplis.',
-  'station.title': 'Contrôle station', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'Azimut non lu', 'station.pattern': 'Diagramme', 'station.bi': 'Bi', 'station.retract': 'Rétracter les éléments', 'station.moving': 'EN MOUVEMENT', 'station.elements': 'Éléments (mm)', 'station.read': 'Lire', 'station.readLengths': 'Lire les longueurs actuelles depuis le contrôleur', 'station.noLengths': 'Longueurs inconnues — clique sur Lire pour les récupérer depuis le contrôleur.', 'station.element': 'Élément', 'station.reflector': 'Réflecteur', 'station.driven': 'Radiateur', 'station.director': 'Dir', 'station.set': 'Régler', 'station.elementsHint': "Chaque appui allonge/raccourcit l'élément de 2 mm (comme le pupitre). Vérifie quel élément répond sur ton antenne.", 'station.setExactLen': "Clique pour taper la longueur actuelle exacte (recale la base si la lecture auto est fausse).", 'station.atMax': "Refusé par le contrôleur — l'élément est probablement en butée (longueur max pour cette bande), il ne peut plus s'allonger.", 'station.go': 'Aller', 'station.stop': 'Stop', 'station.dragHint': 'Glisse une carte pour réordonner. Choisis un nombre de colonnes pour la disposition.', 'station.colsAuto': 'Auto', 'station.addDevice': 'Ajouter un appareil', 'station.editDevice': "Modifier l'appareil", 'station.empty': "Aucune carte relais. Ajoute un WebSwitch 1216H ou une carte KMTronic 8 relais pour piloter l'alimentation et les accessoires de ta station.", 'station.online': 'En ligne', 'station.offline': 'Hors ligne', 'station.edit': 'Modifier', 'station.delete': 'Supprimer', 'station.relay': 'Relais', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': "Type d'appareil", 'station.name': 'Nom', 'station.host': 'Hôte / IP', 'station.user': "Nom d'utilisateur", 'station.pass': 'Mot de passe', 'station.optional': 'optionnel', 'station.labels': 'Libellés des relais', 'station.cancel': 'Annuler', 'station.save': 'Enregistrer',
+  'station.title': 'Contrôle station', 'station.rotator': 'Rotator', 'station.rotatorNoRead': 'Azimut non lu', 'station.pattern': 'Diagramme', 'station.bi': 'Bi', 'station.retract': 'Rétracter les éléments', 'station.moving': 'EN MOUVEMENT', 'station.elements': 'Éléments (mm)', 'station.read': 'Lire', 'station.readLengths': 'Lire les longueurs actuelles depuis le contrôleur', 'station.noLengths': 'Longueurs inconnues — clique sur Lire pour les récupérer depuis le contrôleur.', 'station.element': 'Élément', 'station.reflector': 'Réflecteur', 'station.driven': 'Radiateur', 'station.director': 'Dir', 'station.set': 'Régler', 'station.elementsHint': "Chaque appui allonge/raccourcit l'élément de 2 mm (comme le pupitre). Vérifie quel élément répond sur ton antenne.", 'station.setExactLen': "Clique pour taper la longueur actuelle exacte (recale la base si la lecture auto est fausse).", 'station.atMax': "Refusé par le contrôleur — l'élément est probablement en butée (longueur max pour cette bande), il ne peut plus s'allonger.", 'station.go': 'Aller', 'station.stop': 'Stop', 'station.dragHint': 'Glisse une carte pour réordonner. Choisis un nombre de colonnes pour la disposition.', 'station.colsAuto': 'Auto', 'station.addDevice': 'Ajouter un appareil', 'station.editDevice': "Modifier l'appareil", 'station.empty': "Aucune carte relais. Ajoute un WebSwitch 1216H ou une carte KMTronic 8 relais pour piloter l'alimentation et les accessoires de ta station.", 'station.online': 'En ligne', 'station.offline': 'Hors ligne', 'station.edit': 'Modifier', 'station.delete': 'Supprimer', 'station.relay': 'Relais', 'station.on': 'ON', 'station.off': 'OFF', 'station.type': "Type d'appareil", 'station.name': 'Nom', 'station.host': 'Hôte / IP', 'station.user': "Nom d'utilisateur", 'station.pass': 'Mot de passe', 'station.optional': 'optionnel', 'station.ftdiSerial': 'Numéro de série FTDI', 'station.detect': 'Détecter', 'station.ftdiHint': "La carte Denkovi se pilote en FTDI bit-bang (pas via le port COM). Choisis son numéro de série (ex. DAE0006K). Nécessite le driver FTDI D2XX installé.", 'station.channels': 'Relais', 'station.comPort': 'Port COM', 'station.noPorts': 'Aucun port', 'station.usbRelayHint': "Cartes USB-série bon marché (CH340/LCUS) protocole A0. Si la tienne ne commute pas, donne-moi le modèle / jeu de commandes.", 'station.labels': 'Libellés des relais', 'station.cancel': 'Annuler', 'station.save': 'Enregistrer',
  'sec.awards': 'Diplômes', 'sec.cat': 'Interface CAT', 'sec.rotator': 'Rotator', 'sec.winkeyer': 'Manipulateur CW',
-  'sec.antenna': 'Antenne motorisée', 'sec.antgenius': 'Antenna Genius', 'sec.pgxl': 'Power Genius', 'sec.flex': 'FlexRadio', 'sec.audio': 'Périphériques audio',
+  'sec.antenna': 'Antenne motorisée', 'sec.antgenius': 'Antenna Genius', 'sec.pgxl': 'Amplificateur', 'sec.flex': 'FlexRadio', 'sec.audio': 'Périphériques audio',
  'sec.relayauto': 'Relais automatiques',
  'relayauto.hint': "Commute automatiquement les relais du Station Control selon la fréquence / bande du poste (comme PstRotator). Par relais : une plage de fréquence (ON dedans, OFF dehors) ou un ensemble de bandes. Les relais se configurent dans le panneau Station Control.",
  'relayauto.enable': 'Activer les relais automatiques',
@@ -540,7 +544,7 @@ const fr: Dict = {
  'db.backend': 'Base de données', 'db.configLocal': 'les réglages restent dans le fichier SQLite local', 'db.connectUse': 'Connecter et utiliser',
  'db.savedRestart': 'Enregistré. Redémarrez OpsLog pour ouvrir cette base :', 'db.restartNow': 'Redémarrer OpsLog', 'db.restartHint': '(réouverture automatique)',
  'db.current': 'Base actuelle', 'db.customLoc': '(emplacement personnalisé)', 'db.default': '(par défaut)', 'db.defaultLabel': 'Par défaut :',
-  'db.newDb': 'Nouvelle base…', 'db.openExisting': 'Ouvrir existante…', 'db.saveCopy': 'Enregistrer une copie & basculer…', 'db.resetDefault': 'Réinitialiser par défaut', 'db.quitNow': 'Quitter maintenant',
+  'db.newDb': 'Nouvelle base…', 'db.openExisting': 'Ouvrir existante…', 'db.saveCopy': 'Enregistrer une copie & basculer…', 'db.rename': 'Renommer…', 'db.renameTip': 'Renomme cette base (garde toute ta config). L’ancien fichier est supprimé au prochain lancement.', 'db.resetDefault': 'Réinitialiser par défaut', 'db.quitNow': 'Quitter maintenant',
  'db.host': 'Hôte', 'db.port': 'Port', 'db.database': 'Base', 'db.user': 'Utilisateur', 'db.testCreate': 'Tester & créer la base', 'db.testing': 'Test…', 'db.connectedReady': 'Connecté — base prête ✓', 'db.failed': 'Échec : ',
  'db.mysqlHint': "Plusieurs instances d'OpsLog pointées vers une même base MySQL voient leurs QSO en direct (rafraîchi toutes les 2 s). Teste & crée la base, puis Enregistrer & basculer le journal ci-dessus pour commencer à logger là-bas.",
  'db.dataLocation': 'Emplacement des données', 'db.currentDataDir': 'Dossier de données actuel',
@@ -568,7 +572,7 @@ const fr: Dict = {
  'ctp.stopContest': 'Arrêter le contest', 'ctp.startContest': 'Démarrer le contest', 'ctp.activeHint': 'Le formulaire de saisie affiche Env/Reç et un badge DUPE ; les QSO sont marqués avec ce contest.', 'ctp.inactiveHint': 'Choisis un contest, règle la fenêtre, puis Démarrer.', 'ctp.scoreboard': 'Tableau des scores', 'ctp.estimate': 'estimation', 'ctp.qsos': 'QSO', 'ctp.mult': 'Mult', 'ctp.scoreEst': 'Score (est.)', 'ctp.last60': 'Dernières 60 min', 'ctp.band': 'Bande',
  'adx.introPart1': 'Tous les champs ADIF 3.1.7 non affichés dans les autres onglets. Choisis un champ à ajouter, ou saisis un tag personnalisé/constructeur (ex. ', 'adx.introPart2': '). Stocké sans perte et exporté en mode ADIF ', 'adx.fullMode': 'complet', 'adx.introPart3': '.', 'adx.addFieldPh': 'Ajouter un champ ADIF…', 'adx.showDeprecated': 'Afficher les obsolètes', 'adx.noExtra': 'Aucun champ ADIF supplémentaire. Utilise le sélecteur ci-dessus pour en ajouter un.', 'adx.deprecated': 'obsolète', 'adx.intl': 'intl', 'adx.nonStandard': 'non standard', 'adx.removeField': 'Supprimer le champ',
  'wkp.sending': 'Émission…', 'wkp.connectedV': 'Connecté (v{version})', 'wkp.disconnected': 'Déconnecté', 'wkp.comPort': 'Port COM', 'wkp.noPorts': 'Aucun port', 'wkp.refreshPorts': 'Rafraîchir les ports', 'wkp.connect': 'Connecter', 'wkp.disconnect': 'Déconnecter', 'wkp.hide': 'Masquer / désactiver le WinKeyer',
-  'wkp.sourceHint': 'Sortie CW : WK = WinKeyer matériel · CI-V = le keyer interne de l’Icom (via CAT, sans matériel en plus)', 'wkp.civReady': 'Icom CI-V prêt', 'wkp.civOffline': 'Icom non connecté (Réglages → CAT)',
+  'wkp.sourceHint': 'Sortie CW : WK = WinKeyer matériel · CI-V = le keyer interne de l’Icom (via CAT, sans matériel en plus)', 'wkp.civReady': 'Icom CI-V prêt', 'wkp.civOffline': 'Icom non connecté (Réglages → CAT)', 'wkp.cwxReady': 'Flex CWX prêt', 'wkp.cwxOffline': 'Flex non connecté (Réglages → CAT)',
  'wkp.cwSpeed': 'Vitesse CW (WPM)', 'wkp.faster': 'Plus rapide', 'wkp.slower': 'Plus lent', 'wkp.cwText': 'Texte CW', 'wkp.sendOnTypeHint': 'Manipule chaque caractère en direct à la frappe (retour arrière supprime les caractères non émis)', 'wkp.sendOnType': 'émission à la frappe', 'wkp.phLive': 'Tape — émis en direct…', 'wkp.phEnter': 'Tape et appuie sur Entrée pour émettre…', 'wkp.clear': 'Effacer', 'wkp.send': 'Émettre', 'wkp.abort': 'Interrompre (vider le tampon du manipulateur)', 'wkp.stop': 'Stop',
  'wkp.breakIn': 'Break-in', 'wkp.breakInHint': "Le manipulateur interne de la radio n'émet que si le break-in est SEMI ou FULL. OFF génère la tonalité mais reste en réception.", 'wkp.bkOff': 'OFF', 'wkp.bkOffWarn': "n'émettra pas — mettre SEMI ou FULL",
  'wkp.autoCallHint': "Clique une macro CQ (dont le texte contient CQ) pour la réémettre en boucle — message, pause, répétition — jusqu'à envoyer une autre macro (ex. un report), appuyer sur Stop ou ESC. Les macros non-CQ ne sont émises qu'une fois.", 'wkp.autoCall': 'Appel auto', 'wkp.gap': 'pause', 'wkp.gapHint': 'Secondes à attendre après le message avant de réémettre', 'wkp.loopHint': 'clique une macro CQ pour la boucler', 'wkp.macroN': 'Macro {n}',
@@ -598,6 +602,10 @@ const fr: Dict = {
  'awed.builtin': 'Intégré',
  'awed.awardsFolder': 'Dossier awards',
  'awed.awardsFolderTip': 'Chaque diplôme que tu crées est enregistré ici en JSON, automatiquement. Pour en partager un : envoie le fichier. Pour en recevoir un : Importer.',
+  'awed.catalogPublish': 'Publier au catalogue…',
+  'awed.catalogPublishTip': "Exporte ce diplôme en fichier catalogue (avec la version à gauche), à coller par-dessus internal/award/catalog/<code>.json. Une nouvelle release le diffuse à toute l'équipe — les copies non modifiées s'upgradent seules, les modifiées se le voient proposer.",
+  'awed.catalogExportedTo': 'Fichier catalogue écrit dans :\n{path}\n\nColle-le par-dessus internal/award/catalog/<code>.json, puis build et release.',
+  'awed.catalogBadVersion': 'Entre un numéro de version (1 ou plus).',
  'awed.builtinTip': 'À cocher avant de livrer ce diplôme dans le catalogue. Sans ça, un « Réinitialiser par défaut » le SUPPRIME chez l’utilisateur — alors que tu l’as livré.',
  'awed.protectedFlag': 'Protégé',
  'awed.protectedTip': 'Un diplôme protégé ne peut pas être supprimé depuis l’éditeur.',
@@ -168,6 +168,8 @@ export function ExportADIFSelected(arg1:string,arg2:boolean,arg3:Array<number>):

 export function ExportAward(arg1:string):Promise<string>;

+export function ExportAwardForCatalog(arg1:string,arg2:number):Promise<string>;
+
 export function ExportAwards():Promise<string>;

 export function ExportCabrillo(arg1:string):Promise<main.CabrilloResult>;
@@ -190,8 +192,12 @@ export function FlexAmpOperate(arg1:boolean):Promise<void>;

 export function FlexApplyBandAntenna(arg1:string):Promise<void>;

+export function FlexBackspaceCW(arg1:number):Promise<void>;
+
 export function FlexMox(arg1:boolean):Promise<void>;

+export function FlexSendCW(arg1:string):Promise<void>;
+
 export function FlexSetAGCMode(arg1:string):Promise<void>;

 export function FlexSetAGCThreshold(arg1:number):Promise<void>;
@@ -222,6 +228,8 @@ export function FlexSetCWSpeed(arg1:number):Promise<void>;

 export function FlexSetFilter(arg1:number,arg2:number):Promise<void>;

+export function FlexSetKeySpeed(arg1:number):Promise<void>;
+
 export function FlexSetMic(arg1:number):Promise<void>;

 export function FlexSetMicProfile(arg1:string):Promise<void>;
@@ -278,6 +286,8 @@ export function FlexSetXIT(arg1:boolean):Promise<void>;

 export function FlexSetXITFreq(arg1:number):Promise<void>;

+export function FlexStopCW():Promise<void>;
+
 export function FlexTune(arg1:boolean):Promise<void>;

 export function GetADIFMonitor():Promise<main.ADIFMonitorConfig>;
@@ -536,6 +546,8 @@ export function ListContests():Promise<Array<contest.Def>>;

 export function ListCountries():Promise<Array<string>>;

+export function ListDenkoviDevices():Promise<Array<string>>;
+
 export function ListOperatingTree():Promise<Array<operating.Station>>;

 export function ListProfiles():Promise<Array<profile.Profile>>;
@@ -676,6 +688,8 @@ export function ReloadUDPIntegrations():Promise<Array<string>>;

 export function RemovePassphrase(arg1:string):Promise<void>;

+export function RenameDatabase(arg1:string):Promise<void>;
+
 export function RenderEQSL(arg1:number,arg2:number):Promise<string>;

 export function ReplaceAwardReferences(arg1:string,arg2:Array<awardref.Ref>):Promise<number>;
@@ -294,6 +294,10 @@ export function ExportAward(arg1) {
  return window['go']['main']['App']['ExportAward'](arg1);
 }

+export function ExportAwardForCatalog(arg1, arg2) {
+  return window['go']['main']['App']['ExportAwardForCatalog'](arg1, arg2);
+}
+
 export function ExportAwards() {
  return window['go']['main']['App']['ExportAwards']();
 }
@@ -338,10 +342,18 @@ export function FlexApplyBandAntenna(arg1) {
  return window['go']['main']['App']['FlexApplyBandAntenna'](arg1);
 }

+export function FlexBackspaceCW(arg1) {
+  return window['go']['main']['App']['FlexBackspaceCW'](arg1);
+}
+
 export function FlexMox(arg1) {
  return window['go']['main']['App']['FlexMox'](arg1);
 }

+export function FlexSendCW(arg1) {
+  return window['go']['main']['App']['FlexSendCW'](arg1);
+}
+
 export function FlexSetAGCMode(arg1) {
  return window['go']['main']['App']['FlexSetAGCMode'](arg1);
 }
@@ -402,6 +414,10 @@ export function FlexSetFilter(arg1, arg2) {
  return window['go']['main']['App']['FlexSetFilter'](arg1, arg2);
 }

+export function FlexSetKeySpeed(arg1) {
+  return window['go']['main']['App']['FlexSetKeySpeed'](arg1);
+}
+
 export function FlexSetMic(arg1) {
  return window['go']['main']['App']['FlexSetMic'](arg1);
 }
@@ -514,6 +530,10 @@ export function FlexSetXITFreq(arg1) {
  return window['go']['main']['App']['FlexSetXITFreq'](arg1);
 }

+export function FlexStopCW() {
+  return window['go']['main']['App']['FlexStopCW']();
+}
+
 export function FlexTune(arg1) {
  return window['go']['main']['App']['FlexTune'](arg1);
 }
@@ -1030,6 +1050,10 @@ export function ListCountries() {
  return window['go']['main']['App']['ListCountries']();
 }

+export function ListDenkoviDevices() {
+  return window['go']['main']['App']['ListDenkoviDevices']();
+}
+
 export function ListOperatingTree() {
  return window['go']['main']['App']['ListOperatingTree']();
 }
@@ -1310,6 +1334,10 @@ export function RemovePassphrase(arg1) {
  return window['go']['main']['App']['RemovePassphrase'](arg1);
 }

+export function RenameDatabase(arg1) {
+  return window['go']['main']['App']['RenameDatabase'](arg1);
+}
+
 export function RenderEQSL(arg1, arg2) {
  return window['go']['main']['App']['RenderEQSL'](arg1, arg2);
 }
@@ -2161,8 +2161,12 @@ export namespace main {
 	}
 	export class PGXLSettings {
 	    enabled: boolean;
+	    type: string;
+	    transport: string;
 	    host: string;
 	    port: number;
+	    com_port: string;
+	    baud: number;
 	
 	    static createFrom(source: any = {}) {
 	        return new PGXLSettings(source);
@@ -2171,8 +2175,12 @@ export namespace main {
 	    constructor(source: any = {}) {
 	        if ('string' === typeof source) source = JSON.parse(source);
 	        this.enabled = source["enabled"];
+	        this.type = source["type"];
+	        this.transport = source["transport"];
 	        this.host = source["host"];
 	        this.port = source["port"];
+	        this.com_port = source["com_port"];
+	        this.baud = source["baud"];
 	    }
 	}
 	export class POTAUnmatched {
@@ -2600,6 +2608,7 @@ export namespace main {
 	    host: string;
 	    user?: string;
 	    pass?: string;
+	    channels?: number;
 	    labels: string[];
 	
 	    static createFrom(source: any = {}) {
@@ -2614,6 +2623,7 @@ export namespace main {
 	        this.host = source["host"];
 	        this.user = source["user"];
 	        this.pass = source["pass"];
+	        this.channels = source["channels"];
 	        this.labels = source["labels"];
 	    }
 	}
@@ -4,11 +4,27 @@
    "name": "Départements Français Métropolitains",
    "valid": true,
    "protected": true,
+    "ref_display": "name",
    "type": "QSOFIELDS",
    "field": "note",
    "pattern": "(?i)\\b(D\\d{1,2}[AB]?)\\b",
+    "or_rules": [
+      {
+        "field": "address",
+        "match_by": "code",
+        "pattern": "\\b(\\d{2})\\d{3}\\b",
+        "prefix": "D"
+      },
+      {
+        "field": "qth",
+        "match_by": "code",
+        "pattern": "\\b(\\d{2})\\d{3}\\b",
+        "prefix": "D"
+      }
+    ],
    "dxcc_filter": [
-      227
+      227,
+      214
    ],
    "confirm": [
      "lotw",
@@ -18,6 +34,777 @@
      "lotw"
    ],
    "total": 96,
-    "builtin": true
-  }
-}
+    "builtin": true,
+    "version": 2
+  },
+  "references": [
+    {
+      "code": "D01",
+      "name": "Ain",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D02",
+      "name": "Aisne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D03",
+      "name": "Allier",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D04",
+      "name": "Alpes-de-Haute-Provence",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D05",
+      "name": "Hautes-Alpes",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D06",
+      "name": "Alpes-Maritimes",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D07",
+      "name": "Ardèche",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D08",
+      "name": "Ardennes",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D09",
+      "name": "Ariège",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D10",
+      "name": "Aube",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D11",
+      "name": "Aude",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D12",
+      "name": "Aveyron",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D13",
+      "name": "Bouches-du-Rhône",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D14",
+      "name": "Calvados",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D15",
+      "name": "Cantal",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D16",
+      "name": "Charente",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D17",
+      "name": "Charente-Maritime",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D18",
+      "name": "Cher",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D19",
+      "name": "Corrèze",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D21",
+      "name": "Côte-d'Or",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D22",
+      "name": "Côtes-d'Armor",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D23",
+      "name": "Creuse",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D24",
+      "name": "Dordogne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D25",
+      "name": "Doubs",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D26",
+      "name": "Drôme",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D27",
+      "name": "Eure",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D28",
+      "name": "Eure-et-Loir",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D29",
+      "name": "Finistère",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D2A",
+      "name": "Corse-du-Sud",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D2B",
+      "name": "Haute-Corse",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D30",
+      "name": "Gard",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D31",
+      "name": "Haute-Garonne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D32",
+      "name": "Gers",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D33",
+      "name": "Gironde",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D34",
+      "name": "Hérault",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D35",
+      "name": "Ille-et-Vilaine",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D36",
+      "name": "Indre",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D37",
+      "name": "Indre-et-Loire",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D38",
+      "name": "Isère",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D39",
+      "name": "Jura",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D40",
+      "name": "Landes",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D41",
+      "name": "Loir-et-Cher",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D42",
+      "name": "Loire",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D43",
+      "name": "Haute-Loire",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D44",
+      "name": "Loire-Atlantique",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D45",
+      "name": "Loiret",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D46",
+      "name": "Lot",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D47",
+      "name": "Lot-et-Garonne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D48",
+      "name": "Lozère",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D49",
+      "name": "Maine-et-Loire",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D50",
+      "name": "Manche",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D51",
+      "name": "Marne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D52",
+      "name": "Haute-Marne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D53",
+      "name": "Mayenne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D54",
+      "name": "Meurthe-et-Moselle",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D55",
+      "name": "Meuse",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D56",
+      "name": "Morbihan",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D57",
+      "name": "Moselle",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D58",
+      "name": "Nièvre",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D59",
+      "name": "Nord",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D60",
+      "name": "Oise",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D61",
+      "name": "Orne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D62",
+      "name": "Pas-de-Calais",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D63",
+      "name": "Puy-de-Dôme",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D64",
+      "name": "Pyrénées-Atlantiques",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D65",
+      "name": "Hautes-Pyrénées",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D66",
+      "name": "Pyrénées-Orientales",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D67",
+      "name": "Bas-Rhin",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D68",
+      "name": "Haut-Rhin",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D69",
+      "name": "Rhône",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D70",
+      "name": "Haute-Saône",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D71",
+      "name": "Saône-et-Loire",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D72",
+      "name": "Sarthe",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D73",
+      "name": "Savoie",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D74",
+      "name": "Haute-Savoie",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D75",
+      "name": "Paris",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D76",
+      "name": "Seine-Maritime",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D77",
+      "name": "Seine-et-Marne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D78",
+      "name": "Yvelines",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D79",
+      "name": "Deux-Sèvres",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D80",
+      "name": "Somme",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D81",
+      "name": "Tarn",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D82",
+      "name": "Tarn-et-Garonne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D83",
+      "name": "Var",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D84",
+      "name": "Vaucluse",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D85",
+      "name": "Vendée",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D86",
+      "name": "Vienne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D87",
+      "name": "Haute-Vienne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D88",
+      "name": "Vosges",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D89",
+      "name": "Yonne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D90",
+      "name": "Territoire de Belfort",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D91",
+      "name": "Essonne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D92",
+      "name": "Hauts-de-Seine",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D93",
+      "name": "Seine-Saint-Denis",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D94",
+      "name": "Val-de-Marne",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    },
+    {
+      "code": "D95",
+      "name": "Val-d'Oise",
+      "dxcc": 227,
+      "group": "",
+      "subgrp": "",
+      "valid": true
+    }
+  ]
+}
@@ -394,6 +394,14 @@ type FlexController interface {
 	SetCWSpeed(int) error
 	SetCWPitch(int) error
 	SetCWBreakInDelay(int) error
+	// CWX keyer — buffered CW keying via SmartSDR's CWX subsystem, so a Flex needs
+	// no WinKeyer / SmartCAT. SendCW queues text (the radio buffers and keys it);
+	// StopCW clears the buffer, aborting the send. BackspaceCW removes the last n
+	// not-yet-keyed characters from the buffer (un-send while sending — for
+	// type-ahead corrections).
+	SendCW(string) error
+	StopCW() error
+	BackspaceCW(int) error
 	SetCWSidetone(bool) error
 	SetSidetoneLevel(int) error
 	SetCWFilter(int) error
@@ -1581,6 +1581,37 @@ func (f *Flex) SetCWBreakInDelay(ms int) error {
 	return nil
 }

+// SendCW queues text on the radio's CWX keyer. SmartSDR buffers and keys it, so
+// no WinKeyer / SmartCAT is needed — and because the radio owns the buffer,
+// characters fed while it's already sending append and key in order (the basis
+// for type-ahead). Quotes/backslashes are escaped for the "cwx send \"…\"" form.
+func (f *Flex) SendCW(text string) error {
+	text = strings.TrimRight(text, "\r\n")
+	if strings.TrimSpace(text) == "" {
+		return nil
+	}
+	esc := strings.NewReplacer(`\`, `\\`, `"`, `\"`).Replace(text)
+	f.send(`cwx send "` + esc + `"`)
+	return nil
+}
+
+// StopCW clears the CWX buffer, aborting whatever is currently being keyed.
+func (f *Flex) StopCW() error {
+	f.send("cwx clear")
+	return nil
+}
+
+// BackspaceCW removes the last n not-yet-keyed characters from the CWX buffer —
+// the "un-send while sending" a serial WinKeyer can't do. Used for type-ahead
+// corrections (backspacing a mistyped call before the radio has keyed it).
+func (f *Flex) BackspaceCW(n int) error {
+	if n < 1 {
+		n = 1
+	}
+	f.send(fmt.Sprintf("cwx erase %d", n))
+	return nil
+}
+
 func (f *Flex) SetCWSidetone(on bool) error {
 	f.mu.Lock()
 	f.tx.cwSidetone = on
@@ -0,0 +1,34 @@
+//go:build !windows
+
+// The Denkovi USB board is driven through FTDI's D2XX bit-bang API (ftd2xx.dll),
+// which OpsLog only wires up on Windows. This stub keeps the package building on
+// other platforms; every call reports the board is unavailable.
+package relaydev
+
+import (
+	"context"
+	"fmt"
+)
+
+type denkoviStub struct{ count int }
+
+// NewDenkovi returns a stub on non-Windows builds.
+func NewDenkovi(serial string, count int) Device {
+	if count != 4 {
+		count = 8
+	}
+	return denkoviStub{count: count}
+}
+
+func (s denkoviStub) Count() int { return s.count }
+func (denkoviStub) Status(context.Context) ([]bool, error) {
+	return nil, fmt.Errorf("Denkovi USB relay board is only supported on Windows")
+}
+func (denkoviStub) Set(context.Context, int, bool) error {
+	return fmt.Errorf("Denkovi USB relay board is only supported on Windows")
+}
+
+// ListDenkovi has no devices to report off Windows.
+func ListDenkovi() ([]string, error) {
+	return nil, fmt.Errorf("Denkovi USB relay board is only supported on Windows")
+}
@@ -0,0 +1,185 @@
+//go:build windows
+
+// Denkovi USB 8-channel relay board (FT245RL). Despite enumerating as a virtual
+// COM port, this board is NOT driven by serial/ASCII: the FT245's 8 data lines
+// each drive a relay, controlled through FTDI's D2XX "bit-bang" mode. One byte
+// written = the 8 relays at once (bit 0 = relay 1). We load ftd2xx.dll at runtime
+// (no CGO) and call the D2XX API directly, exactly as the vendor's tool does
+// (which addresses the board by its FTDI serial, e.g. "DAE0006K").
+package relaydev
+
+import (
+	"context"
+	"fmt"
+	"strings"
+	"sync"
+	"syscall"
+	"unsafe"
+)
+
+var (
+	ftdll             = syscall.NewLazyDLL("ftd2xx.dll")
+	procOpenEx        = ftdll.NewProc("FT_OpenEx")
+	procClose         = ftdll.NewProc("FT_Close")
+	procSetBitMode    = ftdll.NewProc("FT_SetBitMode")
+	procSetBaudRate   = ftdll.NewProc("FT_SetBaudRate")
+	procWrite         = ftdll.NewProc("FT_Write")
+	procPurge         = ftdll.NewProc("FT_Purge")
+	procCreateInfo    = ftdll.NewProc("FT_CreateDeviceInfoList")
+	procGetInfoDetail = ftdll.NewProc("FT_GetDeviceInfoDetail")
+)
+
+const (
+	ftOpenBySerial  = 1    // FT_OPEN_BY_SERIAL_NUMBER
+	ftBitModeSyncBB = 0x04 // FT_BITMODE_SYNC_BITBANG (the mode Denkovi documents)
+	ftPurgeRX       = 1    // FT_PURGE_RX
+)
+
+func ftOK(r uintptr) bool { return r == 0 } // FT_OK == 0
+
+type denkovi struct {
+	serial string
+	count  int
+	mu     sync.Mutex
+	shadow byte    // last output byte (bit n = relay n+1); authoritative state
+	h      uintptr // FT handle
+	opened bool
+}
+
+// NewDenkovi builds a driver for a Denkovi USB relay board (4 or 8 relays)
+// identified by its FTDI serial number (shown by the vendor tool / FT_PROG,
+// e.g. "DAE0006K"). count defaults to 8; a 4-relay board just uses the low 4 bits.
+func NewDenkovi(serial string, count int) Device {
+	if count != 4 && count != 8 {
+		count = 8
+	}
+	return &denkovi{serial: strings.TrimSpace(serial), count: count}
+}
+
+func (d *denkovi) Count() int { return d.count }
+
+// ensureOpen opens the board and puts it in synchronous bit-bang mode with all 8
+// lines as outputs. Idempotent.
+func (d *denkovi) ensureOpen() error {
+	if d.opened {
+		return nil
+	}
+	if err := ftdll.Load(); err != nil {
+		return fmt.Errorf("FTDI D2XX driver (ftd2xx.dll) not found — install the FTDI D2XX driver / Denkovi software: %w", err)
+	}
+	if d.serial == "" {
+		return fmt.Errorf("no FTDI serial number set for the Denkovi board")
+	}
+	ser, err := syscall.BytePtrFromString(d.serial)
+	if err != nil {
+		return err
+	}
+	var h uintptr
+	if r, _, _ := procOpenEx.Call(uintptr(unsafe.Pointer(ser)), ftOpenBySerial, uintptr(unsafe.Pointer(&h))); !ftOK(r) {
+		return fmt.Errorf("cannot open Denkovi board %q (FT_OpenEx status %d) — is it connected and not in use by another app?", d.serial, r)
+	}
+	// All 8 lines output, synchronous bit-bang.
+	if r, _, _ := procSetBitMode.Call(h, 0xFF, ftBitModeSyncBB); !ftOK(r) {
+		procClose.Call(h)
+		return fmt.Errorf("FT_SetBitMode failed (status %d)", r)
+	}
+	procSetBaudRate.Call(h, 9600) // bit-bang pin-update clock; relays don't need speed
+	d.h = h
+	d.opened = true
+	// Make the hardware match our shadow (starts all-off on first open).
+	return d.writeLocked()
+}
+
+// writeLocked pushes the shadow byte to the relays. Caller holds d.mu.
+func (d *denkovi) writeLocked() error {
+	var written uint32
+	b := d.shadow
+	if r, _, _ := procWrite.Call(d.h, uintptr(unsafe.Pointer(&b)), 1, uintptr(unsafe.Pointer(&written))); !ftOK(r) {
+		return fmt.Errorf("FT_Write failed (status %d)", r)
+	}
+	// Synchronous bit-bang echoes each written byte into the RX buffer; drop it so
+	// it doesn't fill over the life of the connection.
+	procPurge.Call(d.h, ftPurgeRX)
+	return nil
+}
+
+func (d *denkovi) Set(ctx context.Context, relay int, on bool) error {
+	if relay < 1 || relay > d.count {
+		return fmt.Errorf("relay %d out of range 1..%d", relay, d.count)
+	}
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	if err := d.ensureOpen(); err != nil {
+		return err
+	}
+	bit := byte(1) << uint(relay-1) // relay 1 → bit 0
+	if on {
+		d.shadow |= bit
+	} else {
+		d.shadow &^= bit
+	}
+	return d.writeLocked()
+}
+
+func (d *denkovi) Status(ctx context.Context) ([]bool, error) {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	if err := d.ensureOpen(); err != nil {
+		return nil, err
+	}
+	out := make([]bool, d.count)
+	for i := 0; i < d.count; i++ {
+		out[i] = d.shadow&(byte(1)<<uint(i)) != 0
+	}
+	return out, nil
+}
+
+// ListDenkovi returns the FTDI serial numbers of connected devices, for the
+// settings UI to pick from. Requires ftd2xx.dll.
+func ListDenkovi() ([]string, error) {
+	if err := ftdll.Load(); err != nil {
+		return nil, fmt.Errorf("FTDI D2XX driver (ftd2xx.dll) not found — install the FTDI D2XX driver / Denkovi software")
+	}
+	var n uint32
+	if r, _, _ := procCreateInfo.Call(uintptr(unsafe.Pointer(&n))); !ftOK(r) {
+		return nil, fmt.Errorf("FT_CreateDeviceInfoList failed (status %d)", r)
+	}
+	var out []string
+	for i := uint32(0); i < n; i++ {
+		var flags, typ, id, loc uint32
+		serial := make([]byte, 16)
+		desc := make([]byte, 64)
+		var h uintptr
+		r, _, _ := procGetInfoDetail.Call(
+			uintptr(i),
+			uintptr(unsafe.Pointer(&flags)), uintptr(unsafe.Pointer(&typ)),
+			uintptr(unsafe.Pointer(&id)), uintptr(unsafe.Pointer(&loc)),
+			uintptr(unsafe.Pointer(&serial[0])), uintptr(unsafe.Pointer(&desc[0])),
+			uintptr(unsafe.Pointer(&h)),
+		)
+		if !ftOK(r) {
+			continue
+		}
+		if s := cstr(serial); s != "" {
+			out = append(out, s)
+		}
+	}
+	return out, nil
+}
+
+// cstr trims a C string (up to the first NUL) from a fixed buffer.
+func cstr(b []byte) string {
+	if i := indexByte(b, 0); i >= 0 {
+		b = b[:i]
+	}
+	return strings.TrimSpace(string(b))
+}
+
+func indexByte(b []byte, c byte) int {
+	for i := range b {
+		if b[i] == c {
+			return i
+		}
+	}
+	return -1
+}
@@ -0,0 +1,89 @@
+package relaydev
+
+import (
+	"context"
+	"fmt"
+	"strings"
+	"sync"
+
+	"go.bug.st/serial"
+)
+
+// serialRelay drives the common cheap USB-serial relay boards (CH340 / LCUS-1
+// style) that use the "A0" command protocol over a virtual COM port:
+//
+//	[0xA0] [relay 1-based] [state 0|1] [checksum]     checksum = (0xA0+relay+state) & 0xFF
+//
+// e.g. relay 1 ON = A0 01 01 A2, relay 1 OFF = A0 01 00 A1. These boards are
+// write-only (no state readback), so Status reflects a shadow of what we sent.
+// Channel count varies by board (1/2/4/8/16), so it is configurable.
+type serialRelay struct {
+	portName string
+	count    int
+	baud     int
+	mu       sync.Mutex
+	port     serial.Port
+	shadow   []bool
+}
+
+// NewSerialRelay builds a driver for a CH340/LCUS-style USB-serial relay board on
+// the given COM port with `count` channels (defaults to 8).
+func NewSerialRelay(port string, count int) Device {
+	if count < 1 {
+		count = 8
+	}
+	return &serialRelay{portName: strings.TrimSpace(port), count: count, baud: 9600, shadow: make([]bool, count)}
+}
+
+func (s *serialRelay) Count() int { return s.count }
+
+func (s *serialRelay) ensureOpen() error {
+	if s.port != nil {
+		return nil
+	}
+	if s.portName == "" {
+		return fmt.Errorf("no COM port set for the USB relay board")
+	}
+	p, err := serial.Open(s.portName, &serial.Mode{BaudRate: s.baud})
+	if err != nil {
+		return fmt.Errorf("open %s: %w", s.portName, err)
+	}
+	s.port = p
+	return nil
+}
+
+func (s *serialRelay) Set(ctx context.Context, relay int, on bool) error {
+	if relay < 1 || relay > s.count {
+		return fmt.Errorf("relay %d out of range 1..%d", relay, s.count)
+	}
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	if err := s.ensureOpen(); err != nil {
+		return err
+	}
+	st := byte(0)
+	if on {
+		st = 1
+	}
+	r := byte(relay)
+	frame := []byte{0xA0, r, st, byte(0xA0) + r + st} // last byte = checksum
+	if _, err := s.port.Write(frame); err != nil {
+		// Drop the handle so the next call reopens (USB unplugged / port reset).
+		s.port.Close()
+		s.port = nil
+		return fmt.Errorf("write to %s: %w", s.portName, err)
+	}
+	s.shadow[relay-1] = on
+	return nil
+}
+
+func (s *serialRelay) Status(ctx context.Context) ([]bool, error) {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	if err := s.ensureOpen(); err != nil {
+		return nil, err
+	}
+	out := make([]bool, s.count)
+	copy(out, s.shadow)
+	return out, nil
+}
Author	SHA1	Message	Date
rouggy	666b933114	feat: generalize Settings 'Power Genius' into 'Amplifier' (type + serial/IP transport) for SPE Expert Renames the Hardware section to Amplifier and adds an amplifier-type selector (4O3A PowerGenius XL, SPE Expert 1.3K-FA / 1.5K-FA / 2K-FA) plus a transport choice for the SPE amps: USB (serial COM + baud) or Network (RS232-to-Ethernet IP:port). PGXLSettings gains Type/Transport/ComPort/Baud (keys keep the pgxl.* prefix for back-compat). PowerGenius still drives over TCP; SPE settings are stored but control is not wired yet (needs the SPE serial protocol).	2026-07-20 17:44:56 +02:00
rouggy	def59da748	ui: label both USB relay backends as 'Denkovi USB' (FT245/D2XX vs serial/COM)	2026-07-20 17:33:02 +02:00
rouggy	fe69bc308c	feat: Denkovi USB 4/8 (selectable) + generic USB-serial relay board (CH340/LCUS) - Denkovi (FT245 D2XX) now selectable as 4 or 8 relays (a 4-relay board just uses the low nibble); NewDenkovi takes a count, driven by the device's Channels. - New 'usbrelay' backend: cheap CH340/LCUS USB-serial boards over a COM port using the common A0 protocol ([0xA0][relay][state][checksum]); write-only, so Status is a shadow. Channel count configurable (1/2/4/8/16). - StationDevice gains Channels; deviceRelayCount() drives label/relay counts for the variable-size types. Device editor: channel selector + COM-port picker (usbrelay) / FTDI-serial (denkovi). Both untested on hardware; the A0 command set / Denkovi bit order may need a tweak after a live test.	2026-07-20 17:23:38 +02:00
rouggy	c07a17dc47	feat: Denkovi USB 8-relay board (FT245 D2XX bit-bang) Third relay device alongside WebSwitch and KMTronic. Despite enumerating as a COM port, this board is driven via FTDI D2XX synchronous bit-bang (one byte = 8 relays, bit 0 = relay 1), not serial ASCII — so we load ftd2xx.dll at runtime (no CGO) and call FT_OpenEx/FT_SetBitMode/FT_Write, addressing the board by its FTDI serial (e.g. DAE0006K), exactly like the vendor tool. Windows-only (stub elsewhere); ListDenkoviDevices enumerates connected serials for the picker. Wired into relaydev (Count/Status/Set), app.go (deviceDriver/relayCountFor/type whitelist + ListDenkoviDevices binding), and the Station device editor (new type + FTDI-serial field with Detect). Untested on hardware; bit order / on-polarity may need a flip after a live test.	2026-07-20 16:50:04 +02:00
rouggy	3cef885934	feat: Flex CWX type-ahead backspace (cwx erase) — phase 2 Completes the CWX type-ahead loop: with send-on-type the keyer-panel CW text already streams each typed char to the radio's CWX buffer (which keys in order, so you can keep typing while it sends); this adds the matching un-send. Route wkBackspace to FlexBackspaceCW -> cwx erase N, so backspacing a mistyped char in send-on-type removes it from the buffer before the radio keys it.	2026-07-20 16:12:24 +02:00
rouggy	b8db653981	fix: ESC now stops the active CW engine (Icom/Flex), not just WinKeyer The ESC abort keyed WinkeyerStop unconditionally, so it never aborted the Icom CI-V or Flex CWX keyer. Route the stop through cwSource like the panel Stop button does.	2026-07-20 15:51:32 +02:00
rouggy	9729ef62ba	feat: FlexRadio CWX CW keyer (send/stop/speed) — no WinKeyer/SmartCAT needed Adds a third CW engine alongside WinKeyer and Icom CI-V: FlexRadio's CWX keyer over the existing SmartSDR CAT connection. - cat.FlexController: SendCW (cwx send), StopCW (cwx clear); flex.go implements them, escaping the quoted text form. Speed reuses SetCWSpeed (cw wpm). - App bindings FlexSendCW/FlexStopCW/FlexSetKeySpeed via FlexDo. - Frontend: cwSource gains 'flex'; macros/auto-call/<LOGQSO>/send-on-type route to Flex when the CAT backend is a Flex (estimate-based timing like Icom, no busy echo). Keyer panel shows 'Flex CWX' + ready/offline; Settings adds the engine option with a CAT-backend guard. Core send/stop/speed first; type-ahead buffer + mid-send backspace (cwx delete) to follow.	2026-07-20 15:13:24 +02:00
rouggy	cc6411a618	fix: Antenna Genius buttons ignored clicks while the CW decoder ran PortBtn was defined inside AntGeniusPanel, so every render produced a new component type and React unmounted/remounted every port button. Normally re-renders are rare so it's invisible, but the CW decoder floods the app with cw:text/cw:status events (re-render many times a second), tearing the buttons down between mousedown and mouseup — the click never completed and the antenna never switched. Move PortBtn to module scope (stable identity) and pass onActivate/t as props.	2026-07-20 14:45:29 +02:00
rouggy	991831bdec	chore: DDFM catalog file updated from Publish-to-catalog (address+QTH postal OR-rules, full department reference list)	2026-07-20 14:39:15 +02:00
rouggy	1b2da95ad4	ui: widen the Award management modal (max-w-6xl, 95vw) so the fuller footer fits	2026-07-20 14:35:18 +02:00
rouggy	10d86db50a	feat: rename the database from Settings, keeping all config Adds a Rename button to Settings -> Database: renames the current SQLite database (e.g. opslog.db -> F4BPO.db) while preserving every setting/profile, unlike New database which starts empty. Implemented as a VACUUM INTO copy + pointer switch; the old file (open and locked now) is scheduled via config.json delete_pending and removed, with its -wal/-shm sidecars, on the next launch.	2026-07-20 14:30:45 +02:00
rouggy	8538f48259	feat: Publish-to-catalog export for awards (edit in UI, version, ship to team) Adds ExportAwardForCatalog(code, version): writes the selected award as a catalog-format JSON ({"def":…,"references":…}) stamped with a version and with user_edited cleared, ready to paste over internal/award/catalog/<code>.json. A new release then propagates the change to the whole team via mergeCatalog — unedited copies auto-upgrade, edited ones are offered the update. UI: a version input + "Publish to catalog…" button in the award editor footer, defaulting to one past the award's current version.	2026-07-20 14:20:30 +02:00
rouggy	0fa91c3d5f	feat: ship DDFM v2 (postal-code OR-rule) via the award catalog so it reaches the team DDFM now derives the French department from the address postal code, not only from a note typed by hand — the catalog def gains the address OR-rule (\d{2}\d{3} -> Dxx), France+Corsica scope, and version 2. On next launch every operator whose DDFM is unedited auto-upgrades to it (user-edited copies are offered it); the materialised award_refs then recompute so ~500+ French QSOs gain their department. Also: a catalog definition update now clears the award_refs backfill flag, so any future catalog bump self-heals the stored columns without a manual flag bump.	2026-07-20 13:57:50 +02:00
rouggy	c86d331bd9	fix: re-materialize award_refs so new matching rules reach existing QSOs The one-shot award_refs backfill never revisited rows after it ran, so a QSO materialized before an award gained a rule kept stale values — e.g. DDFM's postal-code OR-rule matched nothing on the 500+ French QSOs whose department comes from the address, only the handful with it typed in notes. Two fixes: bump the backfill flag (awards.materialized.v2) so every operator re-materializes once on next launch with their current definitions, and make RescanAwards (the Awards tab Rescan button) also recompute award_refs for an on-demand refresh.	2026-07-20 13:41:14 +02:00