chore: release v0.22.9

The 0.22.7/0.22.8 breakage came from a Xiegu-reported fault being fixed
inside the Yaesu and Kenwood backends. The lesson is structural: nothing
a backend does may be steered by another backend's report or another
backend's setting.

The lower-lines checkbox introduced for 0.22.9 was still one shared key
applied to both Yaesu and Kenwood — the same reflex in miniature. It is
now cat.yaesu.low_dtr_rts and cat.kenwood.low_dtr_rts, each checkbox in
its backend's own settings block, each wired only to its backend. The
shared key never shipped, so nothing needs migrating.

changelog.json

@@ -1,4 +1,180 @@
 [
+  {
+    "version": "0.22.9",
+    "date": "",
+    "en": [
+      "Awards: the CW / Phone / Digital filter now applies to the whole award — bands, counts, confirmations and the contacts behind a cell — instead of only hiding rows from the reference list.",
+      "Yaesu and Kenwood: a new option lowers the DTR and RTS lines on connect, for interfaces that read either as PTT and keep the radio transmitting while OpsLog is open. Off by default — lowering them stops other interfaces transmitting at all.",
+      "SPE amplifiers: the ON and OFF buttons now switch the amplifier on and off over USB.",
+      "Quieter diagnostic log: no more FlexRadio meter subscriptions, per-packet WSJT-X/MSHV lines, or repeated Tuner Genius / PGXL / SPE status frames.",
+      "Station Control: the cards now line up on a grid — same width, and same height across a row — and the column selector goes up to 6.",
+      "New amplifier widget beside the keyers (flame icon): Operate, power ON/OFF, the SPE power level and live watts / SWR / temperature. With several amplifiers a dropdown on the icon picks the one to watch, or all of them.",
+      "Icom: the meters and front-panel readings are polled only while the Icom console is on screen. They were half of the CI-V traffic at all times, which matters when the link is shared — a microHAM Router splitting one CI-V port between OpsLog and WSJT-X, for instance.",
+      "Icom: the power-ON button sends a wake preamble sized for the CI-V speed. It was a fixed length that only suited 19200 baud, so a radio set faster — 115200 is the default — ignored the command.",
+      "The Tuner Genius power meter now shows the peak the device itself measured, instead of whatever instant the poll happened to catch — a kilowatt transmission could read a few hundred watts. Every power meter also clears the moment the carrier drops, instead of trailing several seconds behind it."
+    ],
+    "fr": [
+      "Diplômes : le filtre CW / Phonie / Numérique s’applique désormais à tout le diplôme — bandes, comptes, confirmations et QSO derrière une case — au lieu de masquer seulement des lignes de la liste des références.",
+      "Yaesu et Kenwood : une option abaisse les lignes DTR et RTS à la connexion, pour les interfaces qui les lisent comme PTT et laissent la radio en émission tant qu’OpsLog est ouvert. Désactivée par défaut — les abaisser empêche d’autres interfaces d’émettre.",
+      "Amplificateurs SPE : les boutons ON et OFF allument et éteignent désormais l’amplificateur par l’USB.",
+      "Journal de diagnostic allégé : plus d’abonnements aux mètres FlexRadio, de ligne par paquet WSJT-X/MSHV, ni de trames statut Tuner Genius / PGXL / SPE répétées.",
+      "Contrôle station : les cartes s’alignent désormais sur une grille — même largeur, et même hauteur sur une ligne — et le sélecteur de colonnes va jusqu’à 6.",
+      "Nouveau widget amplificateur à côté des manipulateurs (icône flamme) : Operate, marche/arrêt, le niveau de puissance SPE et les watts / ROS / température en direct. Avec plusieurs amplis, une liste déroulante sur l’icône choisit celui à surveiller, ou tous.",
+      "Icom : les mesures et les réglages de façade ne sont interrogés que lorsque la console Icom est affichée. Ils représentaient la moitié du trafic CI-V en permanence, ce qui compte quand la liaison est partagée — un Router microHAM qui répartit un port CI-V entre OpsLog et WSJT-X, par exemple.",
+      "Icom : le bouton de mise sous tension envoie un préambule de réveil dimensionné pour la vitesse CI-V. Sa longueur était fixe et ne convenait qu’à 19200 bauds, si bien qu’une radio réglée plus vite — 115200 par défaut — ignorait la commande.",
+      "Le mètre de puissance du Tuner Genius affiche désormais la crête mesurée par l’appareil lui-même, au lieu de l’instant capté par l’interrogation — une émission d’un kilowatt pouvait afficher quelques centaines de watts. Tous les mètres de puissance retombent aussi dès la fin de l’émission, au lieu de traîner plusieurs secondes."
+    ]
+  },
+  {
+    "version": "0.22.8",
+    "date": "",
+    "en": [
+      "Main tab: drag the divider between the two panes to resize them. The setting is remembered and travels with the data folder; double-click the divider to even them out.",
+      "Kenwood: bytes arriving glued to the previous answer are no longer discarded, and the link starts from a clean buffer — a rig whose replies ran together could end up one answer behind and never report connected.",
+      "The CAT log line now carries the error explaining a disconnection.",
+      "Kenwood and Yaesu CAT connect again: 0.22.7 lowered the DTR and RTS lines on those ports, which stops many USB-serial interfaces from transmitting. Only Xiegu, where the problem was reported, still does it.",
+      "Kenwood: a port that opens but sends nothing is now reported differently from one sending data that does not answer, and the error quotes what arrived."
+    ],
+    "fr": [
+      "Onglet Principal : faites glisser le séparateur entre les deux volets pour les redimensionner. Le réglage est mémorisé et suit le dossier de données ; double-clic pour les égaliser.",
+      "Kenwood : les octets reçus collés à la réponse précédente ne sont plus jetés, et la liaison démarre sur un tampon vide — une radio dont les réponses s’enchaînent pouvait rester une réponse en retard et ne jamais apparaître connectée.",
+      "La ligne de journal CAT indique désormais l’erreur expliquant une déconnexion.",
+      "Le CAT Kenwood et Yaesu se connecte de nouveau : la 0.22.7 abaissait les lignes DTR et RTS sur ces ports, ce qui empêche beaucoup d’interfaces USB-série d’émettre. Seul Xiegu, où le problème avait été signalé, le fait encore.",
+      "Kenwood : un port qui s’ouvre sans rien émettre est désormais distingué d’un port qui émet sans répondre, et l’erreur cite ce qui est arrivé."
+    ]
+  },
+  {
+    "version": "0.22.7",
+    "date": "",
+    "en": [
+      "Serial CAT no longer keys the radio just by connecting: DTR and RTS are dropped on Xiegu, Yaesu and Kenwood as they already were on Icom — a Xiegu G90 behind a DE-19 went straight into transmit and stayed there.",
+      "Xiegu: choose how the rig is keyed — CI-V command, RTS or DTR. A G90 does not transmit on the CI-V command, so this is also what lets WSJT-X transmit through the shared CAT link.",
+      "A reference you assign by hand now replaces what the matcher found instead of being added to it, so a correction survives the next recompute.",
+      "Awards: an award can be marked one reference per QSO. When several references then match the same contact it keeps none and lists them, so you pick — a contact does not silently get the wrong DOK. Off by default, so an n-fer POTA activation still counts every park.",
+      "Dark themes: the calendar icon of date and date-time fields is visible again.",
+      "Live award detection now sees the QTH, name, country, comment, note and grid you typed, not just the looked-up address — an award matching on the town stayed silent until the QSO was logged.",
+      "Info (F2) panel: the fields are sized for what they hold — a wider county, narrower prefix and zones, and the address takes the space left by the bearing and distances.",
+      "Clicking in the lower half no longer draws an orange rule under the tab strip.",
+      "A green NEW badge appears on the County field in Info (F2) when the contacted US county has never been worked.",
+      "DARC DOK award updated to v2 in the catalogue: one reference per QSO."
+    ],
+    "fr": [
+      "Le CAT série ne met plus la radio en émission par le seul fait de se connecter : DTR et RTS sont abaissés sur Xiegu, Yaesu et Kenwood comme ils l'étaient déjà sur Icom — un Xiegu G90 derrière un DE-19 partait en émission et y restait.",
+      "Xiegu : choix du passage en émission — commande CI-V, RTS ou DTR. Un G90 n'émet pas sur la commande CI-V, c'est donc aussi ce qui permet à WSJT-X d'émettre via le partage CAT.",
+      "Une référence que vous affectez à la main remplace désormais ce que la détection avait trouvé au lieu de s'y ajouter : une correction survit au recalcul suivant.",
+      "Diplômes : un diplôme peut être marqué une seule référence par QSO. Si plusieurs références correspondent alors au même contact, aucune n’est retenue et elles sont listées pour que vous choisissiez — un contact ne reçoit plus silencieusement le mauvais DOK. Désactivé par défaut, donc une activation POTA n-fer compte toujours tous les parcs.",
+      "Thèmes sombres : l’icône calendrier des champs date et date-heure est de nouveau visible.",
+      "La détection des diplômes en direct voit maintenant le QTH, le nom, le pays, le commentaire, la note et le locator saisis, et plus seulement l’adresse issue de la recherche — un diplôme qui matche sur la ville restait muet jusqu’à l’enregistrement du QSO.",
+      "Panneau Info (F2) : les champs sont dimensionnés selon leur contenu — comté plus large, préfixe et zones plus étroits, et l’adresse récupère la place laissée par l’azimut et les distances.",
+      "Un clic dans la moitié basse ne trace plus de trait orange sous la barre d’onglets.",
+      "Un badge vert NOUV apparaît sur le champ Comté dans Info (F2) quand le comté américain contacté n’a jamais été travaillé.",
+      "Diplôme DARC DOK mis à jour en v2 dans le catalogue : une seule référence par QSO."
+    ]
+  },
+  {
+    "version": "0.22.6",
+    "date": "",
+    "en": [
+      "A playback that fails to start now says so in the log instead of ending silently after a tenth of a second.",
+      "Replaying a recording before the previous one has finished now works: the new playback waits for the audio device to be free instead of keying the radio and releasing at once.",
+      "The play button becomes a stop button while the recording is going out: it cuts the transmission and releases the PTT, and you can send it again straight away.",
+      "The \"From radio\" and mic levels take effect as you drag the slider, and the RX level now applies to what you HEAR through OpsLog, not only to recordings.",
+      "The padlocks on frequency, band, mode and times no longer flicker under the pointer and refuse the click.",
+      "The callsign field is wider, taking the room from the RST pair.",
+      "MP3 recordings no longer carry a hiss of their own: the 16→32 kHz conversion mirrored the whole spectrum only 7 dB down. It is now 57 dB down.",
+      "Replaying a QSO recording on the air has its own level, separate from the voice keyer: a recording comes from a receiver line output and needs far less gain than a message spoken into a microphone.",
+      "A quiet DX cluster no longer looks like a broken one: silence stopped counting as a disconnection, so a node with few spots keeps its session, its login and its filters."
+    ],
+    "fr": [
+      "Une lecture qui ne démarre pas le signale désormais dans le journal, au lieu de s'arrêter en silence au bout d'un dixième de seconde.",
+      "Relancer un enregistrement avant la fin du précédent fonctionne désormais : la nouvelle lecture attend que le périphérique audio soit libre, au lieu de passer en émission et de relâcher aussitôt.",
+      "Le bouton de lecture devient un bouton d'arrêt pendant l'émission de l'enregistrement : il coupe l'émission et relâche le PTT, et vous pouvez le renvoyer aussitôt.",
+      "Les niveaux « From radio » et micro agissent pendant que vous déplacez le curseur, et le niveau RX s'applique désormais à ce que vous ENTENDEZ dans OpsLog, pas seulement aux enregistrements.",
+      "Les cadenas de fréquence, bande, mode et heures ne scintillent plus sous le curseur et acceptent le clic.",
+      "Le champ indicatif est plus large, la place venant de la paire RST.",
+      "Les enregistrements MP3 ne portent plus un souffle qui leur est propre : la conversion 16→32 kHz recopiait tout le spectre à seulement 7 dB en dessous. Il est désormais à 57 dB.",
+      "La relecture d'un enregistrement de QSO a son propre niveau, distinct du manipulateur vocal : une prise vient de la sortie ligne d'un récepteur et demande bien moins de gain qu'un message dit au micro.",
+      "Un cluster calme ne passe plus pour un cluster mort : le silence ne compte plus comme une déconnexion, donc un nœud avec peu de spots garde sa session, son login et ses filtres."
+    ]
+  },
+  {
+    "version": "0.22.5",
+    "date": "",
+    "en": [
+      "Cluster filters gain NEW POTA and NEW COUNTY, alongside the existing status chips."
+    ],
+    "fr": [
+      "Les filtres du cluster gagnent NEW POTA et NEW COUNTY, à côté des pastilles de statut existantes."
+    ]
+  },
+  {
+    "version": "0.22.4",
+    "date": "",
+    "en": [
+      "FlexRadio: in split, OpsLog stays on the receive slice instead of following the transmitter.",
+      "QSO recording works on CW again (no sidetone).",
+      "Playing a recording on the air now says why when it cannot.",
+      "The play-on-air button is hidden on CW.",
+      "CW decoder: a station replying at a different speed no longer decodes as a run of dashes, and callsigns are no longer split into single letters by a wide fist.",
+      "FlexRadio: one table per band for the antennas and the TX power per mode class (phone / CW / digital). Antennas follow the band, power follows the band and the mode; an empty box leaves the power alone.",
+      "Grouping the digital modes into one slot now takes effect on the spots already on screen, instead of only on those arriving afterwards.",
+      "The QSO right-click menu no longer runs off the bottom of the window: it opens above the cursor when there is not enough room below.",
+      "QRZ.com confirmations: only QRZ own confirmed marker counts now. The download also clears QSOs an earlier version marked confirmed when QRZ says they are not — run it once to correct your log.",
+      "Awards: a mode filter (All / CW / Phone / Digital) that stacks with the worked/confirmed one — so \"worked on CW but not confirmed on CW\" is one click."
+    ],
+    "fr": [
+      "FlexRadio : en split, OpsLog reste sur la slice de réception au lieu de suivre l'émission.",
+      "L'enregistrement des QSO fonctionne à nouveau en CW (sans le signal d'écoute).",
+      "L'émission d'un enregistrement indique désormais pourquoi elle échoue.",
+      "Le bouton d'émission de l'enregistrement est masqué en CW.",
+      "Décodeur CW : une station qui répond à une autre vitesse ne se décode plus en série de traits, et les indicatifs ne sont plus coupés lettre par lettre par un espacement large.",
+      "FlexRadio : un seul tableau par bande pour les antennes et la puissance d'émission par type de mode (phonie / CW / numérique). Les antennes suivent la bande, la puissance suit la bande et le mode ; une case vide ne touche pas à la puissance.",
+      "Le regroupement des modes numériques en un seul créneau s'applique désormais aux spots déjà affichés, et non plus seulement à ceux qui arrivent ensuite.",
+      "Le menu contextuel des QSO ne déborde plus en bas de la fenêtre : il s'ouvre au-dessus du curseur quand la place manque en dessous.",
+      "Confirmations QRZ.com : seul le marqueur de confirmation propre à QRZ compte désormais. Le téléchargement efface aussi les QSO qu'une version antérieure avait marqués confirmés alors que QRZ dit le contraire — lancez-le une fois pour corriger votre journal.",
+      "Diplômes : un filtre par mode (Tous / CW / Phonie / Numérique) qui se cumule avec le filtre contacté/confirmé — « contacté en CW mais pas confirmé en CW » se lit en un clic."
+    ]
+  },
+  {
+    "version": "0.22.3",
+    "date": "",
+    "en": [
+      "Kenwood backend tested end to end against the built-in TS-2000 emulator.",
+      "Kenwood: split detected from FR/FT when the radio omits it from its status frame.",
+      "CAT protocol trace now covers the Kenwood backend, not only CI-V.",
+      "Updating selected QSOs from the callsign databases shows a progress bar, without blocking the rest of OpsLog. Menu entry renamed \"Update from the callsign databases\".",
+      "Grey line on the world map: day/night terminator and twilight band, button at the top right.",
+      "The CAT and WinKeyer trace checkboxes now show whether the trace is really running.",
+      "A radio reporting LSB or USB now selects SSB in the entry form.",
+      "Kenwood CAT over the network: give a host:port for a serial bridge instead of a COM port.",
+      "CAT backends renamed by how the radio is reached: OmniRig, FlexRadio (API), Yaesu (USB), Kenwood (USB, network), Xiegu (USB), Icom (CI-V USB), Icom (CI-V network), TCI.",
+      "With automatic recording off, a red dot beside the callsign records the contact by hand.",
+      "A recording can be stopped and transmitted to the station being worked, like a voice-keyer message.",
+      "Award references can be sorted by reference or by description.",
+      "Deleting a QSO can also withdraw it from QRZ.com and Club Log — Settings → External services, off by default.",
+      "QSL and upload status columns are coloured: Y green, N red, R blue.",
+      "Settings → General chooses between US / FR / Standard for dates. Display only.",
+      "New award: DARC DOK Award (DLD)."
+    ],
+    "fr": [
+      "Backend Kenwood testé de bout en bout contre l’émulateur TS-2000 intégré.",
+      "Kenwood : split détecté via FR/FT quand la radio ne le renseigne pas dans sa trame d’état.",
+      "La trace du protocole CAT couvre aussi le backend Kenwood, plus seulement le CI-V.",
+      "La mise à jour des QSO sélectionnés depuis les annuaires affiche une barre de progression, sans bloquer le reste d’OpsLog. Entrée de menu renommée « Mettre à jour depuis les annuaires ».",
+      "Ligne grise sur la carte du monde : terminateur jour/nuit et bande de crépuscule, bouton en haut à droite.",
+      "Les cases de trace CAT et WinKeyer reflètent désormais l’état réel de la trace.",
+      "Une radio annonçant LSB ou USB sélectionne désormais SSB dans la saisie.",
+      "CAT Kenwood par le réseau : indiquez un hôte:port de pont série au lieu d’un port COM.",
+      "Backends CAT renommés selon la façon dont la radio est jointe : OmniRig, FlexRadio (API), Yaesu (USB), Kenwood (USB, réseau), Xiegu (USB), Icom (CI-V USB), Icom (CI-V réseau), TCI.",
+      "Enregistrement automatique désactivé : un rond rouge à côté de l’indicatif enregistre le contact à la main.",
+      "Un enregistrement peut être arrêté puis émis vers la station travaillée, comme un message du manipulateur vocal.",
+      "Les références d’un diplôme peuvent être triées par référence ou par description.",
+      "Supprimer un QSO peut aussi le retirer de QRZ.com et Club Log — Réglages → Services externes, désactivé par défaut.",
+      "Colonnes de statut QSL et d’envoi colorées : Y vert, N rouge, R bleu.",
+      "Réglages → Général : choix US / FR / Standard pour les dates. Affichage seulement.",
+      "Nouveau diplôme : DARC DOK Award (DLD)."
+    ]
+  },
   {
     "version": "0.22.2",
     "date": "2026-07-30",

flexpower_test.go

@@ -0,0 +1,25 @@
+package main
+
+import "testing"
+
+// Which class of power a mode falls into.
+//
+// This decides how much power leaves the amplifier, so an error here is not a
+// display bug: a digital mode sorted as phone gets the SSB setting, which is
+// exactly the 1.5 kW into a 100% duty cycle this feature exists to prevent.
+func TestFlexPowerClass(t *testing.T) {
+	for _, c := range []struct{ mode, want string }{
+		{"SSB", "phone"}, {"USB", "phone"}, {"LSB", "phone"}, {"AM", "phone"}, {"FM", "phone"},
+		{"CW", "cw"}, {"cw", "cw"}, {" CW ", "cw"},
+		{"FT8", "digi"}, {"FT4", "digi"}, {"RTTY", "digi"}, {"PSK31", "digi"},
+		{"JS8", "digi"}, {"Q65", "digi"}, {"MSK144", "digi"}, {"DATA", "digi"},
+		{"DIGU", "digi"}, {"DIGL", "digi"}, {"WSPR", "digi"},
+		// Unknown or empty: no class, and the caller changes nothing. Setting a
+		// transmit power from a name we do not recognise is not a good guess.
+		{"", ""}, {"SSTV", ""}, {"BANANA", ""},
+	} {
+		if got := flexPowerClass(c.mode); got != c.want {
+			t.Errorf("flexPowerClass(%q) = %q, want %q", c.mode, got, c.want)
+		}
+	}
+}

frontend/src/App.tsx

@@ -1,6 +1,6 @@
 import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import {
-  Activity, AlertCircle, Antenna, Bell, Check, CheckCircle2, ChevronDown, Clock, CloudOff, Compass, Database, Ear, Eraser, Gauge, Hash, Loader2, Lock,
+  Activity, AlertCircle, Antenna, Bell, Check, CheckCircle2, ChevronDown, Clock, CloudOff, Compass, Database, Ear, Eraser, Flame, Gauge, Hash, Loader2, Lock,
   Maximize2, Minimize2, Mic, MessageSquare, Pencil, Radio, RadioTower, RefreshCw, Satellite, Send, Settings, SlidersHorizontal, SpellCheck, Square, Terminal, Trash2, Unlock, X, Zap,
 } from 'lucide-react';
 
@@ -17,7 +17,7 @@ import {
   SMTPConfigured, SendLogToDeveloper,
   WorkedBefore,
   SetCompactMode,
-  GetCATState, SetCATFrequency, SetCATMode, SwitchCATRig, FlexApplyBandAntenna,
+  GetCATState, SetCATFrequency, SetCATMode, SwitchCATRig, FlexApplyBandAntenna, FlexApplyBandPower,
   GetSecretStatus, UnlockSecrets,
   RefreshCtyDat, DownloadAllReferenceLists,
   RotatorGoTo, RotatorStop, GetRotatorHeading,
@@ -44,6 +44,7 @@ import {
   StartCWDecoder, StopCWDecoder, SetCWDecoderPitch,
   ChatAvailable, GetChatHistory, SendChatMessage, GetOnlineOperators,
   QSOAudioBegin, QSOAudioCancel, QSOAudioRestart, QSOAudioResetClock,
+  QSOAudioManualReady, QSOAudioManualStart, QSOAudioStop, QSOAudioResume, QSOAudioPlayOnAir,
   GetAwardDefs,
   GetUIPref, GetActiveProfile, ListProfiles, ActivateProfile, QuitApp,
   ReportLiveActivity, LiveLastQSOAgeSec,
@@ -76,6 +77,7 @@ import { IcomPanel } from '@/components/IcomPanel';
 import { YaesuPanel } from '@/components/YaesuPanel';
 import { AntGeniusPanel, type AGStatus } from '@/components/AntGeniusPanel';
 import { TunerGeniusPanel, type TGStatus } from '@/components/TunerGeniusPanel';
+import { AmpWidget } from '@/components/AmpWidget';
 import { ScpPanel, type ScpResult } from '@/components/ScpPanel';
 import { FilterBuilder, type QueryFilter } from '@/components/FilterBuilder';
 import { AwardsPanel } from '@/components/AwardsPanel';
@@ -99,6 +101,7 @@ import { SendSpotModal, type RecentSpotQSO } from '@/components/SendSpotModal';
 import { WinkeyerPanel, type WKStatus, type WKMacro } from '@/components/WinkeyerPanel';
 import { RotorCompass } from '@/components/RotorCompass';
 import { writeUiPref } from '@/lib/uiPref';
+import { formatDateTimeUTC } from '@/lib/dateFormat';
 import { setGridPrefsProfile, flushGridPrefs } from '@/lib/gridPrefs';
 import { DvkPanel, type DVKMsg, type DVKStat } from '@/components/DvkPanel';
 
@@ -135,7 +138,15 @@ const DEFAULT_MODES = ['SSB','CW','FT8','FT4','RTTY','PSK31','AM','FM','DIGITALV
 // Modes the QSO recorder captures (phone only). Mirrors recordableMode() in
 // app.go — digital modes carry no useful audio, and CW has no DAX audio on Flex,
 // so neither is recorded (no REC badge / timer for them).
-const RECORDABLE_MODES = new Set(['SSB','USB','LSB','AM','FM','DV']);
+// Modes a VOICE keyer may transmit on. Not a recording list — the DVK plays
+// speech, and sending it on CW or a data slot keys the rig with a human voice.
+const PHONE_MODES = new Set(['SSB','USB','LSB','AM','FM','DV']);
+
+// Modes worth recording. Phone, plus CW: the audio path stays open in CW, so
+// the other station's signal is captured. Your own sidetone is not in it —
+// SmartSDR does not route it through DAX — and that is accepted. Digital modes
+// stay out: their audio is a modem tone nobody will ever replay.
+const RECORDABLE_MODES = new Set([...PHONE_MODES, 'CW']);
 
 const emptyDetails: DetailsState = {
   state: '', cnty: '', address: '',
@@ -168,11 +179,7 @@ function parseAwardRefs(s: any): Record<string, string> {
 }
 
 function fmtDateUTC(s: any): string {
-  if (!s) return '';
-  const d = new Date(s);
-  if (isNaN(d.getTime())) return s;
-  const p = (n: number) => String(n).padStart(2, '0');
-  return `${d.getUTCFullYear()}-${p(d.getUTCMonth() + 1)}-${p(d.getUTCDate())} ${p(d.getUTCHours())}:${p(d.getUTCMinutes())}`;
+  return formatDateTimeUTC(s);
 }
 function fmtFreq(hz?: number): string {
   if (!hz) return '';
@@ -387,11 +394,40 @@ function WindowControls() {
   );
 }
 
+// LockPad — the padlock toggle shown in a lockable field's label. Its icon
+// matches the state, so a glance says which fields are immune to CAT updates
+// and to the live clock.
+//
+// It lives HERE, at module level, and not inside App. Defined inside, React saw
+// a new component type on every render of App — and App re-renders about four
+// times a second while the CAT polls — so the button was unmounted and rebuilt
+// each time. It flickered under the pointer and swallowed clicks, because the
+// node being clicked no longer existed by the time the click landed.
+function LockPad({ on, title, onToggle }: { on: boolean; title: string; onToggle: () => void }) {
+  const Icon = on ? Lock : Unlock;
+  return (
+    <button
+      type="button"
+      tabIndex={-1}
+      onClick={onToggle}
+      title={`${on ? 'Unlock' : 'Lock'} ${title}`}
+      className={cn(
+        'inline-flex items-center justify-center size-3.5 rounded transition-colors',
+        on ? 'text-warning hover:text-warning' : 'text-muted-foreground/40 hover:text-muted-foreground',
+      )}
+    >
+      <Icon className="size-3" />
+    </button>
+  );
+}
+
 export default function App() {
   const { t, lang } = useI18n();
   // === Lists from settings (fallback for first paint) ===
   const [bands, setBands] = useState<string[]>(DEFAULT_BANDS);
   const [modes, setModes] = useState<string[]>(DEFAULT_MODES);
+  const modesRef = useRef(modes);
+  useEffect(() => { modesRef.current = modes; }, [modes]);
   const [modePresets, setModePresets] = useState<ModePreset[]>([]);
 
   // === Entry ===
@@ -447,27 +483,6 @@ export default function App() {
       return next;
     });
   };
-  // Small padlock toggle rendered inside each lockable field's label. Match
-  // the icon to the current state so the user can tell at a glance which
-  // fields are immune to CAT updates / live clock.
-  function LockBtn({ k, title }: { k: LockKey; title: string }) {
-    const on = locks[k];
-    const Icon = on ? Lock : Unlock;
-    return (
-      <button
-        type="button"
-        tabIndex={-1}
-        onClick={() => toggleLock(k)}
-        title={`${on ? 'Unlock' : 'Lock'} ${title}`}
-        className={cn(
-          'inline-flex items-center justify-center size-3.5 rounded transition-colors',
-          on ? 'text-warning hover:text-warning' : 'text-muted-foreground/40 hover:text-muted-foreground',
-        )}
-      >
-        <Icon className="size-3" />
-      </button>
-    );
-  }
   const [band, setBand] = useState('20m');
   const [mode, setMode] = useState('SSB');
   const [freqMhz, setFreqMhz] = useState('');
@@ -556,6 +571,16 @@ export default function App() {
   // PGXL's OPERATE state comes from the radio when it reports the amp.
   const [ampSts, setAmpSts] = useState<any[]>([]);
   const [flexAmp, setFlexAmp] = useState<any>(null);
+  // Amplifier widget: whether it is shown, and which amp — "all", or one amp id.
+  // Several amps side by side make a wide widget, so an operator running two
+  // picks the one he watches while transmitting. Declared here because the poll
+  // below runs faster while the widget is open.
+  const [showAmpWidget, setShowAmpWidget] = useState(() => localStorage.getItem('opslog.showAmpWidget') !== '0');
+  const [ampWidgetSel, setAmpWidgetSel] = useState(() => localStorage.getItem('opslog.ampSel.widget') || 'all');
+  // Poll fast only while the amplifier widget is open: its meters must track TX
+  // the way the FlexRadio panel's do (400 ms), or the power reads seconds behind
+  // the transmission and looks like the app is struggling. The status-bar chips
+  // alone need nothing like that rate.
   useEffect(() => {
     let alive = true;
     const tick = () => Promise.all([
@@ -563,9 +588,9 @@ export default function App() {
       GetFlexState().catch(() => null),
     ]).then(([l, fx]: any[]) => { if (alive) { setAmpSts((l ?? []) as any[]); setFlexAmp(fx); } });
     tick();
-    const id = window.setInterval(tick, 2000);
+    const id = window.setInterval(tick, showAmpWidget ? 400 : 2000);
     return () => { alive = false; window.clearInterval(id); };
-  }, []);
+  }, [showAmpWidget]);
   // Multi-op "who's on air" widget: every operator's live status from the shared
   // MySQL logbook (freq/mode/version). Only polled on a MySQL logbook.
   type LiveStation = { operator: string; station: string; freq_hz: number; band: string; mode: string; online: boolean; version: string; age_sec: number };
@@ -766,16 +791,59 @@ export default function App() {
   // Elapsed recording time (seconds) shown next to the red dot, ticking once a
   // second while a recording is in progress.
   const [recSeconds, setRecSeconds] = useState(0);
+  // Mirrored in a ref so the clock can RESUME from where it stopped rather than
+  // restart, without the timer effect depending on the value it sets.
+  const recSecondsRef = useRef(0);
+  useEffect(() => { recSecondsRef.current = recSeconds; }, [recSeconds]);
   // Bumped on every (re)start so the timer resets even when `recording` was
   // already true (jumping spot→spot keeps recording=true but starts a fresh take).
   const [recTick, setRecTick] = useState(0);
+  // True when the sound devices are configured but automatic recording is OFF —
+  // the only case where a record button makes sense. Asking the backend rather
+  // than reading a preference here keeps the two from drifting apart.
+  const [manualRecReady, setManualRecReady] = useState(false);
+  // A stopped take is still a take: the audio is kept and will be saved with the
+  // QSO. This only says the clock has stopped and the recording can be played.
+  const [recStopped, setRecStopped] = useState(false);
+  const stopRecording = () => {
+    QSOAudioStop().then((ok) => { if (ok) setRecStopped(true); }).catch(() => {});
+  };
+  const resumeRecording = () => {
+    QSOAudioResume().then((ok) => { if (ok) { setRecStopped(false); setRecTick((t) => t + 1); } }).catch(() => {});
+  };
+  // One button, two jobs: play, and stop what is playing.
+  //
+  // A second press used to RESTART the message from the beginning. What an
+  // operator wants there is to cut it short — they have heard enough, or they
+  // pressed it by mistake with the transmitter keyed — and then to be able to
+  // send it again straight away. Stopping releases the PTT through the same
+  // path the natural end uses.
+  const playRecordingOnAir = () => {
+    if (dvkStat.playing) { DVKStop(); return; }
+    QSOAudioPlayOnAir().catch((e: any) => setError(String(e?.message ?? e)));
+  };
+  const refreshManualRecReady = () => { QSOAudioManualReady().then(setManualRecReady).catch(() => {}); };
+  useEffect(() => { refreshManualRecReady(); }, []);
+  const startManualRecording = () => {
+    QSOAudioManualStart().then((active) => {
+      setRecording(active);
+      setRecTick((t) => t + 1);
+      if (!active) setError(t('rec.manualFailed'));
+    }).catch((e: any) => setError(String(e?.message ?? e)));
+  };
   useEffect(() => {
     if (!recording) { setRecSeconds(0); return; }
+    // A stopped take freezes the clock where it is: it must show the length of
+    // the file, not the time since the QSO began.
+    if (recStopped) return;
+    const from = recSecondsRef.current;
     const start = Date.now();
-    setRecSeconds(0);
-    const id = window.setInterval(() => setRecSeconds(Math.floor((Date.now() - start) / 1000)), 1000);
+    const id = window.setInterval(() => setRecSeconds(from + Math.floor((Date.now() - start) / 1000)), 1000);
     return () => window.clearInterval(id);
-  }, [recording, recTick]);
+  }, [recording, recTick, recStopped]);
+  // recTick means "a fresh take" — that is the only case where the clock returns
+  // to zero, as opposed to resuming after a stop.
+  useEffect(() => { setRecSeconds(0); recSecondsRef.current = 0; setRecStopped(false); }, [recTick]);
   // The callsign the in-progress recording belongs to (uppercased; '' = none).
   // Lets us restart from zero when the operator edits the call to a different
   // station mid-recording, instead of continuing the old take.
@@ -814,6 +882,36 @@ export default function App() {
     return ALWAYS_TABS.includes(saved) ? saved : 'recent';
   });
   useEffect(() => { writeUiPref('opslog.activeTab', activeTab); }, [activeTab]);
+
+  // Main tab: how much width the LEFT pane gets, in percent. Clamped to 15..85
+  // so a pane can be made small but never dragged out of existence — recovering
+  // from that means finding a divider that is no longer on screen.
+  const [mainSplit, setMainSplit] = useState<number>(() => {
+    const n = parseFloat(localStorage.getItem('opslog.mainSplit') || '');
+    return Number.isFinite(n) && n >= 15 && n <= 85 ? n : 50;
+  });
+  useEffect(() => { writeUiPref('opslog.mainSplit', String(Math.round(mainSplit))); }, [mainSplit]);
+  const mainSplitRef = useRef<HTMLDivElement | null>(null);
+  const startMainSplitDrag = (e: React.PointerEvent) => {
+    e.preventDefault();
+    const host = mainSplitRef.current;
+    if (!host) return;
+    // Pointer capture on the divider, so dragging over a map keeps working —
+    // Leaflet would otherwise swallow the moves the moment the cursor entered it.
+    (e.currentTarget as HTMLElement).setPointerCapture(e.pointerId);
+    const onMove = (ev: PointerEvent) => {
+      const r = host.getBoundingClientRect();
+      if (r.width <= 0) return;
+      const pct = ((ev.clientX - r.left) / r.width) * 100;
+      setMainSplit(Math.min(85, Math.max(15, pct)));
+    };
+    const onUp = () => {
+      window.removeEventListener('pointermove', onMove);
+      window.removeEventListener('pointerup', onUp);
+    };
+    window.addEventListener('pointermove', onMove);
+    window.addEventListener('pointerup', onUp);
+  };
   // QSL Manager is a closable tab opened on demand from Tools → QSL Manager.
   const [qslTabOpen, setQslTabOpen] = useState(false);
   const [qslDesignerOpen, setQslDesignerOpen] = useState(false);
@@ -1198,7 +1296,7 @@ export default function App() {
   useEffect(() => { dvkAutoCqSecsRef.current = dvkAutoCqSecs; localStorage.setItem('opslog.dvkAutoCqSecs', String(dvkAutoCqSecs)); }, [dvkAutoCqSecs]);
   // The DVK is a VOICE keyer — transmitting it on CW/FT8/RTTY would key the rig
   // with speech on a data slot. Only allow it on phone modes.
-  const isPhoneMode = (m: string) => RECORDABLE_MODES.has((m || '').toUpperCase());
+  const isPhoneMode = (m: string) => PHONE_MODES.has((m || '').toUpperCase());
   const modeRef = useRef(mode);
   useEffect(() => { modeRef.current = mode; }, [mode]);
   function stopDvkAutoCq() { dvkAutoCqSlotRef.current = -1; dvkAutoCqGenRef.current++; }
@@ -1280,7 +1378,12 @@ export default function App() {
   // Status filter chips. Empty set = show every status (including
   // already-worked). Otherwise only matching spots pass.
   type SpotStatusKey = 'new' | 'new-band' | 'new-mode' | 'new-slot' | 'worked';
-  const [clusterStatusFilter, setClusterStatusFilter] = useState<Set<SpotStatusKey>>(() => lsSet<SpotStatusKey>('opslog.clusterStatusFilter'));
+  // What the cluster can be FILTERED on. A superset of the entity status: a new
+  // county or a new park is not a DXCC state, it is another dimension of the
+  // same spot — which is why the grid shows them as separate badges. Filtering
+  // is an OR across all of them, as it already was for a worked callsign.
+  type SpotFilterKey = SpotStatusKey | 'new-pota' | 'new-county';
+  const [clusterStatusFilter, setClusterStatusFilter] = useState<Set<SpotFilterKey>>(() => lsSet<SpotFilterKey>('opslog.clusterStatusFilter'));
   // Mode filter chips. Empty set = show every mode. Categories map the
   // inferred per-spot mode onto SSB (phone) / CW / DATA (digital).
   type SpotModeCat = 'SSB' | 'CW' | 'DATA';
@@ -1518,6 +1621,8 @@ export default function App() {
   const [importDupMode, setImportDupMode] = useState<'skip' | 'update' | 'all'>('skip');
   const [importApplyCty, setImportApplyCty] = useState(true);
   const [importApplyStation, setImportApplyStation] = useState(false);
+  // Progress of a bulk update (QRZ.com / cty.dat / ClubLog) over selected QSOs.
+  const [bulkProgress, setBulkProgress] = useState<{ op: string; processed: number; total: number; call: string } | null>(null);
   // Field remapping, off unless the operator adds a row. Contest software puts
   // the exchange where its own module keeps it rather than where ADIF says: the
   // RSGB IOTA contest exports the island reference in STATE, which imports as a
@@ -2042,9 +2147,29 @@ export default function App() {
   // a 599 left from a CW QSO would stick when jumping to an SSB spot.
   function applyModeFromSpot(m: string) {
     if (!m) return;
-    setMode(m);
+    const logged = catModeToLoggedMode(m);
+    setMode(logged);
     rstUserEditedRef.current = false;
-    applyModePreset(m);
+    applyModePreset(logged);
+  }
+  // catModeToLoggedMode maps what a radio reports onto a mode this station
+  // actually logs.
+  //
+  // Radios report the SIDEBAND — a Kenwood or Yaesu on 40 m answers LSB, not
+  // SSB. The mode list is SSB, so nothing matched and the selector sat empty
+  // while the frequency tracked perfectly: "the mode is not recognised".
+  //
+  // It is also the ADIF-correct direction. LSB and USB are SUBMODEs there, not
+  // modes; MODE=LSB is not a valid ADIF value and is what would be sent to LoTW
+  // and eQSL. So this protects the upload as much as the selector.
+  //
+  // A station that has deliberately put LSB or USB in its own mode list keeps
+  // them: the list is the operator's statement of what they log.
+  function catModeToLoggedMode(m: string): string {
+    const list = modesRef.current;
+    if (!m || list.includes(m)) return m;
+    if ((m === 'LSB' || m === 'USB') && list.includes('SSB')) return 'SSB';
+    return m;
   }
   function applyModePreset(m: string) {
     if (rstUserEditedRef.current) return;
@@ -2211,8 +2336,9 @@ export default function App() {
         else if (s.mode) nextMode = s.mode;
       }
       if (nextMode) {
-        setMode(nextMode);
-        applyModePreset(nextMode); // flip 599↔59 on mode change (respects edits)
+        const logged = catModeToLoggedMode(nextMode);
+        setMode(logged);
+        applyModePreset(logged); // flip 599↔59 on mode change (respects edits)
       }
     }
   }
@@ -2238,6 +2364,25 @@ export default function App() {
     FlexApplyBandAntenna(b).catch(() => {});
   }, [band, catState.backend, locks.band]);
 
+  // Per-band, per-mode TX power. Applied on band AND mode changes — the point is
+  // that moving to FT8 on a band where full power is fine for SSB does not put
+  // full power into a 100% duty-cycle signal.
+  //
+  // Not skipped on a locked band, unlike the antennas: the lock means "do not
+  // let the rig drag my log entry around", not "let the amplifier take whatever
+  // the last mode left it at".
+  const lastPwrRef = useRef('');
+  useEffect(() => {
+    if (catState.backend !== 'flex') return;
+    const b = band.trim();
+    const m = mode.trim();
+    if (!b || !m) return;
+    const key = b + '/' + m;
+    if (key === lastPwrRef.current) return;
+    lastPwrRef.current = key;
+    FlexApplyBandPower(b, m).catch(() => {});
+  }, [band, mode, catState.backend]);
+
   // Cluster live wiring: hydrate per-server status + saved server list,
   // then subscribe to push events.
   async function reloadClusterMeta() {
@@ -2402,6 +2547,14 @@ export default function App() {
       const call = String(p?.call ?? '');
       if (applyUdpCall(call, true)) restartRecordingForNewTarget(call);
     });
+    const unsubBulk = EventsOn('bulkupdate:progress', (p: any) => {
+      const total = Number(p?.total ?? 0);
+      const processed = Number(p?.processed ?? 0);
+      // The closing event (processed === total) clears the overlay: the work is
+      // done, and a bar left at 100% would have to be dismissed by hand.
+      if (total > 0 && processed >= total) { setBulkProgress(null); return; }
+      setBulkProgress({ op: String(p?.op ?? ''), processed, total, call: String(p?.call ?? '') });
+    });
     const unsubProg = EventsOn('import:progress', (p: any) => {
       setImportProgress({ processed: Number(p?.processed ?? 0), total: Number(p?.total ?? 0) });
     });
@@ -2428,7 +2581,7 @@ export default function App() {
       const file = String(p?.file ?? '').replace(/^.*[\\/]/, '');
       showToast(file ? t('adifmon.toastFrom', { n, file }) : t('adifmon.toast', { n }));
     });
-    return () => { unsubDX?.(); unsubRC?.(); unsubClear?.(); unsubFlexSpot?.(); unsubProg?.(); unsubLog?.(); unsubAdifMon?.(); };
+    return () => { unsubDX?.(); unsubRC?.(); unsubClear?.(); unsubFlexSpot?.(); unsubProg?.(); unsubBulk?.(); unsubLog?.(); unsubAdifMon?.(); };
     // eslint-disable-next-line react-hooks/exhaustive-deps
   }, []);
 
@@ -2935,9 +3088,9 @@ export default function App() {
   }
   async function bulkUpdateFromQRZ(ids: number[]) {
     if (ids.length === 0) return;
-    showToast(`Querying QRZ.com for ${ids.length} QSO${ids.length > 1 ? 's' : ''}…`);
     try { await afterBulkUpdate(await UpdateQSOsFromQRZ(ids as any), 'from QRZ.com'); }
     catch (e: any) { setError(String(e?.message ?? e)); }
+    finally { setBulkProgress(null); }
   }
   async function bulkUpdateFromClublog(ids: number[]) {
     if (ids.length === 0) return;
@@ -3604,8 +3757,15 @@ export default function App() {
   // single-row strip or the full Log4OM-style columnar layout below. Keeping
   // them as shared consts avoids duplicating the (large) per-field JSX +
   // handlers across the two layouts.
+  // The callsign field is WIDER than the fields around it, deliberately: it is
+  // the one field always typed into, it carries the REC badges on its right, and
+  // a long portable call (VK9/OH1ABC/MM) must stay readable as it is entered.
+  // It was widened by taking room from the RST pair — until a signal report of
+  // "59+30" turned up, which is five characters plus its padding and no longer
+  // fitted. The RST fields are back to their original width; the callsign keeps
+  // the rest of the row.
   const callsignBlock = (
-    <div className="flex flex-col w-44" data-esm="call">
+    <div className="flex flex-col w-56" data-esm="call">
       <Label className="flex items-center gap-2 h-3.5" style={{ marginBottom: 6 }}>
         <span className="text-primary font-semibold">{t('field.callsign')}</span>
         {lookupBusy && (
@@ -3647,17 +3807,82 @@ export default function App() {
           DUPE
         </span>
       )}
-      {recording && RECORDABLE_MODES.has(mode.toUpperCase()) && (
+      {/* Not recording, but able to: offer a record button in the slot the
+          counter will occupy. It disappears the moment recording starts, so the
+          two never fight over the space — and it is only offered on modes that
+          produce audio worth keeping. */}
+      {!recording && manualRecReady && RECORDABLE_MODES.has(mode.toUpperCase()) && (
+        <button
+          type="button"
+          onMouseDown={(e) => e.preventDefault()}
+          onClick={startManualRecording}
+          title={t('rec.manualStart')}
+          className="absolute right-2 top-1/2 -translate-y-1/2 z-10 inline-flex items-center justify-center size-4 rounded-full cursor-pointer hover:bg-destructive-muted"
+        >
+          <span className="size-2.5 rounded-full border border-destructive bg-destructive/40 hover:bg-destructive" />
+        </button>
+      )}
+      {/* A stopped take: play it to the station being worked, or carry on
+          recording. Both sit where the counter is, which has shifted left to
+          make room. */}
+      {/* A stopped take: resume it, and — on PHONE only — play it to the station
+          being worked. In CW the transmitter builds its tone from the keyer and
+          ignores the DAX TX audio path entirely, so the button would key the rig
+          and send silence. The row itself stays, or a CW operator who stopped
+          would be left with no way to resume. */}
+      {recording && recStopped && RECORDABLE_MODES.has(mode.toUpperCase()) && (
+        <span className="absolute right-2 top-1/2 -translate-y-1/2 z-10 inline-flex items-center gap-1.5">
+          {PHONE_MODES.has(mode.toUpperCase()) && (
+            <button
+              type="button"
+              onMouseDown={(e) => e.preventDefault()}
+              onClick={playRecordingOnAir}
+              title={dvkStat.playing ? t('rec.stopPlaying') : t('rec.playOnAir')}
+              className={cn('inline-flex items-center justify-center size-4 rounded',
+                dvkStat.playing ? 'text-destructive hover:bg-destructive-muted' : 'text-success hover:bg-success/15')}
+            >
+              {dvkStat.playing ? <span className="size-2 bg-current" /> : '▶'}
+            </button>
+          )}
+          <button
+            type="button"
+            onMouseDown={(e) => e.preventDefault()}
+            onClick={resumeRecording}
+            title={t('rec.resume')}
+            className="inline-flex items-center justify-center size-4 rounded text-muted-foreground hover:bg-muted"
+          >
+            <span className="size-2 rounded-full bg-destructive" />
+          </button>
+          <span className="text-[10px] font-semibold tabular-nums text-muted-foreground whitespace-nowrap">
+            {String(Math.floor(recSeconds / 60)).padStart(2, '0')}:{String(recSeconds % 60).padStart(2, '0')}
+          </span>
+        </span>
+      )}
+      {/* Stop and the running counter share ONE flex row. They were two absolute
+          boxes at guessed offsets and overlapped as soon as the counter passed a
+          minute — a layout that only looked right for the first 60 seconds. */}
+      {recording && !recStopped && RECORDABLE_MODES.has(mode.toUpperCase()) && (
+        <span className="absolute right-2 top-1/2 -translate-y-1/2 z-10 inline-flex items-center gap-1.5">
+          <button
+            type="button"
+            onMouseDown={(e) => e.preventDefault()}
+            onClick={(e) => { e.stopPropagation(); stopRecording(); }}
+            title={t('rec.stop')}
+            className="inline-flex items-center justify-center size-4 rounded text-muted-foreground hover:bg-muted"
+          >
+            <span className="size-2 bg-current" />
+          </button>
           <button
             type="button"
             onMouseDown={(e) => e.preventDefault()}
             onClick={resetRecordingClock}
             title="Click to restart the recording from 0 — drops everything captured so far (incl. pre-roll) so the file holds only your exchange"
-          className="absolute right-2 top-1/2 -translate-y-1/2 z-10 inline-flex items-center gap-1 text-[10px] font-semibold tabular-nums text-destructive whitespace-nowrap cursor-pointer rounded px-1 hover:bg-destructive-muted"
+            className="inline-flex items-center gap-1 text-[10px] font-semibold tabular-nums text-destructive whitespace-nowrap cursor-pointer rounded px-1 hover:bg-destructive-muted"
           >
             <span className="size-2 rounded-full bg-destructive animate-pulse" />
             {String(Math.floor(recSeconds / 60)).padStart(2, '0')}:{String(recSeconds % 60).padStart(2, '0')}
           </button>
+        </span>
       )}
       <Input
         ref={callsignRef}
@@ -3666,7 +3891,10 @@ export default function App() {
         // exactly the same. A primary-tinted border plus an inset left bar make
         // it the obvious one without adding a colour the theme doesn't own. The
         // contest-dupe state still overrides it — that one is a warning.
+        // Room on the right for the REC badges while they are shown, so a long
+        // callsign runs under them instead of being typed over.
         className={cn('font-mono text-base font-bold tracking-wider uppercase h-9 bg-muted/40 focus:bg-card',
+          recording && RECORDABLE_MODES.has(mode.toUpperCase()) && 'pr-24',
           'border-primary/45 shadow-[inset_3px_0_0_0_var(--primary)]',
           contest.active && contestDupe && 'ring-2 ring-destructive !bg-destructive-muted focus:!bg-destructive-muted text-destructive-muted-foreground shadow-none')}
         value={callsign}
@@ -3723,7 +3951,7 @@ export default function App() {
   ) : null;
   const startBlock = (
     <div className="flex flex-col w-28">
-      <Label className="mb-1 h-3.5 flex items-center gap-1 text-success">{t('field.startUtc')} <LockBtn k="start" title="start time" /></Label>
+      <Label className="mb-1 h-3.5 flex items-center gap-1 text-success">{t('field.startUtc')} <LockPad on={locks.start} title="start time" onToggle={() => toggleLock('start')} /></Label>
       <Input
         readOnly={!locks.start}
         tabIndex={locks.start ? 0 : -1}
@@ -3742,7 +3970,7 @@ export default function App() {
   );
   const endBlock = (
     <div className="flex flex-col w-28">
-      <Label className="mb-1 h-3.5 flex items-center gap-1 text-danger">{t('field.endUtc')} <LockBtn k="end" title="end time" /></Label>
+      <Label className="mb-1 h-3.5 flex items-center gap-1 text-danger">{t('field.endUtc')} <LockPad on={locks.end} title="end time" onToggle={() => toggleLock('end')} /></Label>
       <Input
         readOnly={!locks.end}
         tabIndex={locks.end ? 0 : -1}
@@ -3932,7 +4160,7 @@ export default function App() {
   // used in the full layout to save vertical height.
   const bandRow = (
     <div className="flex items-center gap-2">
-      <Label className="w-20 shrink-0 flex items-center gap-1">{t('field.band')} <LockBtn k="band" title="band" /></Label>
+      <Label className="w-20 shrink-0 flex items-center gap-1">{t('field.band')} <LockPad on={locks.band} title="band" onToggle={() => toggleLock('band')} /></Label>
       <div className="flex-1 min-w-0">
         <Select value={band} onValueChange={onBandUserChange}>
           <SelectTrigger tabIndex={-1} className="h-8"><SelectValue /></SelectTrigger>
@@ -3943,7 +4171,7 @@ export default function App() {
   );
   const modeRow = (
     <div className="flex items-center gap-2">
-      <Label className="w-20 shrink-0 flex items-center gap-1">{t('field.mode')} <LockBtn k="mode" title="mode" /></Label>
+      <Label className="w-20 shrink-0 flex items-center gap-1">{t('field.mode')} <LockPad on={locks.mode} title="mode" onToggle={() => toggleLock('mode')} /></Label>
       <div className="flex-1 min-w-0">
         <Select value={mode} onValueChange={onModeUserChange}>
           <SelectTrigger tabIndex={-1} className="h-8"><SelectValue /></SelectTrigger>
@@ -3999,7 +4227,7 @@ export default function App() {
   };
   const freqBlock = (
     <div className="flex flex-col w-32">
-      <Label className="mb-1 h-3.5 flex items-center gap-1">{t('field.txFreq')} <LockBtn k="freq" title="frequency" /></Label>
+      <Label className="mb-1 h-3.5 flex items-center gap-1">{t('field.txFreq')} <LockPad on={locks.freq} title="frequency" onToggle={() => toggleLock('freq')} /></Label>
       <Input
         tabIndex={-1}
         className="font-mono"
@@ -4109,7 +4337,10 @@ export default function App() {
         // entity status is still new-band/new-slot (the grid flags it WKD CALL),
         // matching the "Hide worked" toggle. Additive: it still matches its own
         // entity status too, so it stays visible under NEW BAND / NEW SLOT.
-        const matches = clusterStatusFilter.has(st) || (!!e?.worked_call && clusterStatusFilter.has('worked'));
+        const matches = clusterStatusFilter.has(st)
+          || (!!e?.worked_call && clusterStatusFilter.has('worked'))
+          || (!!e?.new_pota && clusterStatusFilter.has('new-pota'))
+          || (!!e?.new_county && clusterStatusFilter.has('new-county'));
         if (!matches) return false;
       }
       if (clusterHideWorked) {
@@ -4221,10 +4452,14 @@ export default function App() {
           <div className="text-[10px] uppercase tracking-wider text-muted-foreground mb-1">Status</div>
           <div className="flex flex-wrap gap-1">
             {([
-              { k: 'new'      as SpotStatusKey, label: 'NEW',       cls: 'bg-danger-muted text-danger-muted-foreground border-danger-border' },
-              { k: 'new-band' as SpotStatusKey, label: 'NEW BAND',  cls: 'bg-warning-muted text-warning-muted-foreground border-warning-border' },
-              { k: 'new-mode' as SpotStatusKey, label: 'NEW MODE',  cls: 'bg-caution-muted text-caution-muted-foreground border-caution-border' },
-              { k: 'new-slot' as SpotStatusKey, label: 'NEW SLOT',  cls: 'bg-caution-muted text-caution-muted-foreground border-caution-border' },
+              { k: 'new'      as SpotFilterKey, label: 'NEW',       cls: 'bg-danger-muted text-danger-muted-foreground border-danger-border' },
+              { k: 'new-band' as SpotFilterKey, label: 'NEW BAND',  cls: 'bg-warning-muted text-warning-muted-foreground border-warning-border' },
+              { k: 'new-mode' as SpotFilterKey, label: 'NEW MODE',  cls: 'bg-caution-muted text-caution-muted-foreground border-caution-border' },
+              { k: 'new-slot' as SpotFilterKey, label: 'NEW SLOT',  cls: 'bg-caution-muted text-caution-muted-foreground border-caution-border' },
+              // Same colours as the badges in the grid — a filter that does not
+              // look like what it selects has to be learned twice.
+              { k: 'new-pota'   as SpotFilterKey, label: 'NEW POTA',   cls: 'bg-success-muted text-success-muted-foreground border-success-border' },
+              { k: 'new-county' as SpotFilterKey, label: 'NEW COUNTY', cls: 'bg-info-muted text-info-muted-foreground border-info-border' },
               // (no WORKED chip — use the "Hide worked" checkbox to drop dupes.)
             ]).map((s) => {
               const on = clusterStatusFilter.has(s.k);
@@ -4625,6 +4860,60 @@ export default function App() {
                 {showTuner && tgStatus.connected && <span className="absolute -top-0.5 -right-0.5 size-2 rounded-full bg-success" />}
               </button>
             )}
+            {/* Amplifier widget. With one amp the icon is a plain toggle; with
+                several it also carries a dropdown to choose which one the widget
+                shows (or All), since two amps stacked make a tall widget. */}
+            {ampSts.length > 0 && (
+              <div className="relative inline-flex">
+                <button
+                  type="button"
+                  onClick={() => { const v = !showAmpWidget; setShowAmpWidget(v); writeUiPref('opslog.showAmpWidget', v ? '1' : '0'); }}
+                  title={showAmpWidget ? t('ampw.hideHint') : t('ampw.showHint')}
+                  className={cn(
+                    'relative inline-flex items-center justify-center size-7 rounded-md border transition-colors',
+                    ampSts.length > 1 && 'rounded-r-none border-r-0',
+                    showAmpWidget ? 'border-success-border bg-success-muted text-success-muted-foreground hover:bg-success-muted'
+                      : 'border-border text-muted-foreground hover:bg-muted',
+                  )}
+                >
+                  <Flame className="size-4" />
+                  {showAmpWidget && ampSts.some((a: any) => a.spe?.connected || a.acom?.connected || a.pgxl?.connected || flexAmp?.amp_available) && (
+                    <span className="absolute -top-0.5 -right-0.5 size-2 rounded-full bg-success" />
+                  )}
+                </button>
+                {ampSts.length > 1 && (
+                  <DropdownMenu>
+                    <DropdownMenuTrigger asChild>
+                      <button type="button" title={t('ampw.pick')}
+                        className={cn('inline-flex items-center justify-center h-7 w-4 rounded-md rounded-l-none border transition-colors',
+                          showAmpWidget ? 'border-success-border bg-success-muted text-success-muted-foreground hover:bg-success-muted'
+                            : 'border-border text-muted-foreground hover:bg-muted')}>
+                        <ChevronDown className="size-3" />
+                      </button>
+                    </DropdownMenuTrigger>
+                    <DropdownMenuContent align="end" className="min-w-44">
+                      {[{ id: 'all', name: t('ampw.all') }, ...ampSts.map((a: any) => ({ id: a.id, name: a.name || a.id }))].map((o) => (
+                        <DropdownMenuItem key={o.id}
+                          onSelect={() => {
+                            setAmpWidgetSel(o.id);
+                            writeUiPref('opslog.ampSel.widget', o.id);
+                            // Picking an amp means "show me this one" — opening the
+                            // widget too saves a second click on a hidden one.
+                            if (!showAmpWidget) { setShowAmpWidget(true); writeUiPref('opslog.showAmpWidget', '1'); }
+                          }}>
+                          <span className="flex items-center gap-2 min-w-0">
+                            {ampWidgetSel === o.id
+                              ? <Check className="size-3.5 shrink-0 text-primary" />
+                              : <span className="size-3.5 shrink-0" />}
+                            <span className="truncate">{o.name}</span>
+                          </span>
+                        </DropdownMenuItem>
+                      ))}
+                    </DropdownMenuContent>
+                  </DropdownMenu>
+                )}
+              </div>
+            )}
             {scpEnabled && (
               <button
                 type="button"
@@ -5119,6 +5408,11 @@ export default function App() {
             prefix={prefix}
             operatorGrid={station.my_grid}
             remoteGrid={grid}
+            qth={qth}
+            name={name}
+            country={country}
+            comment={comment}
+            note={note}
             details={details}
             onChange={updateDetails}
             wb={wb}
@@ -5136,7 +5430,7 @@ export default function App() {
       {/* Reserved free space to the right. The WinKeyer CW keyer and/or the
           Digital Voice Keyer take this slot when enabled (Log4OM-style);
           otherwise it shows the QRZ profile photo. */}
-      {!compact && (chatShown || wkEnabled || dvkEnabled || lookupResult?.image_url || (showRotor && (rotatorHeading.enabled || dxPath)) || (showAntGenius && agEnabled) || (showTuner && tgEnabled) || (showScp && scpEnabled) || (showLiveStations && dbConn?.backend === 'mysql')) && (
+      {!compact && (chatShown || wkEnabled || dvkEnabled || lookupResult?.image_url || (showRotor && (rotatorHeading.enabled || dxPath)) || (showAntGenius && agEnabled) || (showTuner && tgEnabled) || (showAmpWidget && ampSts.length > 0) || (showScp && scpEnabled) || (showLiveStations && dbConn?.backend === 'mysql')) && (
         // relative + absolute inner (like the F1-F5 panel): a taller widget (e.g.
         // the DVK with Auto CQ) can't grow the row — the row height stays set by
         // the entry strip and each widget fills that height, scrolling inside.
@@ -5223,6 +5517,19 @@ export default function App() {
               />
             </div>
           )}
+          {showAmpWidget && ampSts.length > 0 && (
+            // One column per amplifier shown, so two amps stand side by side
+            // rather than making the widget twice as tall as the dock row.
+            <div className="shrink-0 min-h-0"
+              style={{ width: `${Math.min(ampWidgetSel === 'all' ? ampSts.length : 1, 3) * 250 + 20}px` }}>
+              <AmpWidget
+                amps={ampSts}
+                flex={flexAmp}
+                sel={ampWidgetSel}
+                onClose={() => { setShowAmpWidget(false); writeUiPref('opslog.showAmpWidget', '0'); }}
+              />
+            </div>
+          )}
           {showTuner && tgEnabled && (
             <div className="w-[230px] shrink-0 min-h-0">
               <TunerGeniusPanel
@@ -5819,8 +6126,23 @@ export default function App() {
               {/* Two configurable panes (per-profile, Settings → Main view).
                   Each side shows one of: great-circle map, locator map, cluster
                   or worked-before. */}
-              <div className="grid grid-cols-2 grid-rows-1 gap-2 h-full min-h-0 p-2">
+              {/* The divider is draggable: a map and a cluster list want very
+                  different widths, and which one deserves the room changes with
+                  what the operator is doing. The share is persisted (portable),
+                  and a double-click puts it back to even. */}
+              <div ref={mainSplitRef} className="grid grid-rows-1 gap-2 h-full min-h-0 p-2"
+                style={{ gridTemplateColumns: `${mainSplit}fr 6px ${100 - mainSplit}fr` }}>
                 <div className="min-h-0 min-w-0 flex">{renderMainPane(mainPaneLeft)}</div>
+                <div
+                  role="separator"
+                  aria-orientation="vertical"
+                  title={t('main.splitTip')}
+                  onPointerDown={startMainSplitDrag}
+                  onDoubleClick={() => setMainSplit(50)}
+                  className="group relative cursor-col-resize flex items-center justify-center -mx-1 px-1"
+                >
+                  <span className="h-10 w-1 rounded-full bg-border group-hover:bg-primary transition-colors" />
+                </div>
                 <div className="min-h-0 min-w-0 flex">{renderMainPane(mainPaneRight)}</div>
               </div>
             </TabsContent>
@@ -6158,7 +6480,14 @@ export default function App() {
         <SettingsModal
           initialSection={settingsSection}
           onClose={() => { setShowSettings(false); setSettingsSection(undefined); }}
-          onSaved={() => { loadStation(); loadLists(); loadCATCfg(); reloadWk(); }}
+          onSaved={() => {
+            loadStation(); loadLists(); loadCATCfg(); reloadWk(); refreshManualRecReady();
+            // Drop the cached spot statuses. They are computed once per
+            // call+band+mode and never expire, so a rule change in Settings —
+            // grouping the digital modes into one slot, above all — left every
+            // spot already on screen showing the answer to the OLD question.
+            setSpotStatus({});
+          }}
           onMainPaneChanged={(side, v) => { if (side === 'left') setMainPaneLeft(v as MainPaneKind); else setMainPaneRight(v as MainPaneKind); }}
           flexAvailable={catState.backend === 'flex'}
           icomAvailable={catState.backend === 'icom'}
@@ -6384,6 +6713,35 @@ export default function App() {
         </Dialog>
       )}
 
+      {/* Deliberately NOT a modal. A contest log is thousands of QSOs and one
+          network round trip each, so this runs for ten minutes \u2014 a dialog would
+          hold the whole application hostage for the duration, and the operator
+          has a radio to work. It sits in the corner, above everything, and
+          stays out of the way. */}
+      {bulkProgress && (
+        <div className="fixed bottom-3 right-3 z-50 w-64 rounded-lg border border-border bg-card/95 backdrop-blur shadow-lg px-3 py-2 space-y-1.5">
+          <div className="text-xs font-medium">{t('bulk.progressTitle')}</div>
+          {(() => {
+            const { processed, total, call } = bulkProgress;
+            const pct = total > 0 ? Math.min(100, Math.round((processed / total) * 100)) : 0;
+            return (
+              <>
+                <div className="h-1.5 w-full rounded-full bg-muted overflow-hidden">
+                  <div
+                    className={cn('h-full bg-primary rounded-full transition-[width] duration-150', total === 0 && 'w-1/3 animate-pulse')}
+                    style={total > 0 ? { width: `${pct}%` } : undefined}
+                  />
+                </div>
+                <div className="flex items-center justify-between text-[10px] text-muted-foreground">
+                  <span className="font-mono">{call || '\u00a0'}</span>
+                  <span className="tabular-nums">{total > 0 ? `${processed} / ${total}` : ''}</span>
+                </div>
+              </>
+            );
+          })()}
+        </div>
+      )}
+
       {importing && (
         <Dialog open>
           <DialogContent className="max-w-sm px-6" hideClose>

frontend/src/components/AmpCard.tsx

@@ -51,11 +51,14 @@ type Amp = { id: string; name: string; type?: string; spe?: any; acom?: any; pgx
 
 export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string, v?: any) => string }) {
   // Peak-hold so the jittery VITA-49 meters read steadily (own ref per card).
+  // One second: the same window as the docked widget, so the two never show
+  // different figures for the same amplifier, and neither trails the end of a
+  // transmission long enough to look like lag.
   const peak = useRef<Record<string, { v: number; t: number }>>({});
   const peakHold = (key: string, val: number) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > 1000) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
@@ -73,9 +76,12 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
               spe.operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
             {spe.operate ? 'OPERATE' : 'STANDBY'}
           </button>
+          {/* Power ON pulses RTS then DTR — it must stay clickable while the amp
+              is off (no status = not "connected"), and serial only. */}
           <div className="inline-flex rounded-lg overflow-hidden border-2 border-success/70">
-            <button type="button" disabled={!spe.connected}
+            <button type="button" disabled={!(spe.connected || spe.transport === 'serial')}
               onClick={() => AmpPower(amp.id, true).catch(() => {})}
+              title={spe.transport === 'serial' ? 'Power on (RTS then DTR pulse)' : 'Power-on needs the serial RTS/DTR lines — not available over a network bridge'}
               className="px-3 py-2 text-sm font-bold bg-card text-success hover:bg-success/15 disabled:opacity-30">ON</button>
             <button type="button" disabled={!spe.connected}
               onClick={() => AmpPower(amp.id, false).catch(() => {})}
@@ -177,9 +183,6 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
             operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
           {operate ? 'OPERATE' : 'STANDBY'}
         </button>
-        <span className="text-xs text-muted-foreground">
-          {operate ? t('flxp.ampInLine') : t('flxp.ampBypassed')}
-        </span>
         {(pg.host || pg.connected) && (
           <label className="flex items-center gap-1.5 text-xs" title={pg.connected ? t('flxp.pgConnected') : (pg.last_error || t('flxp.pgOffline'))}>
             <span className={cn('size-1.5 rounded-full', pg.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
@@ -208,6 +211,11 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
         const amps = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
           && !/^(RL|DRV)$/i.test((m.name || '').trim()));
         if (amps.length === 0) return null;
+        // Power comes from the radio's meter stream and nothing else. The
+        // amplifier also reports a "peakfwd", and using it was a mistake twice
+        // over: it is a latched maximum that is never reset, and it survives in
+        // the last-known status after the amp disconnects — so it claimed
+        // 1350 W from an old transmission while the radio was putting out 10.
         return (
           <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
             {amps.map((m) => {

frontend/src/components/AmpWidget.tsx

@@ -0,0 +1,281 @@
+import { useRef } from 'react';
+import { Flame, X, Power } from 'lucide-react';
+import { cn } from '@/lib/utils';
+import { useI18n } from '@/lib/i18n';
+import { MeterBar } from '@/components/MeterBar';
+import { AmpOperate, AmpPower, AmpPowerLevel, AmpFanMode, FlexAmpOperate } from '../../wailsjs/go/main/App';
+
+// AmpWidget — the docked amplifier widget, the compact counterpart of AmpCard
+// (which is the full-size card shown in the FlexRadio panel and Station
+// Control). It covers all three families, since an operator running an SPE and
+// a PowerGenius wants one widget, not two:
+//   • SPE Expert  — OPERATE, power ON/OFF, L/M/H, live power / SWR / temp
+//   • ACOM        — OPERATE, power ON/OFF, live power / SWR / temp
+//   • PowerGenius — OPERATE and meters ride on the FlexRadio, fan mode on GSCP
+// With several amplifiers configured the caller passes a selection ("all" or an
+// amp id) chosen from the toolbar icon's dropdown.
+
+type Amp = { id: string; name: string; type?: string; spe?: any; acom?: any; pgxl?: any };
+
+// Full-scale watts for the output bar, from the model string.
+function maxW(model?: string, fallback = 1300): number {
+  const m = (model || '').toUpperCase();
+  if (m.includes('20K') || m.includes('2K')) return 2000;
+  if (m.includes('15K')) return 1500;
+  if (m.includes('13K')) return 1300;
+  return fallback;
+}
+
+function swrColour(swr?: number): string {
+  if (!swr || swr <= 0) return 'text-muted-foreground';
+  if (swr <= 1.5) return 'text-success';
+  if (swr <= 2.0) return 'text-warning';
+  return 'text-danger';
+}
+
+// PowerMeter — the output-power LED bar that closes each column, straight under
+// the controls (no filler above it: pushed to the bottom it left a band of dead
+// space in the middle of the column). Uses the app-wide MeterBar, compact size,
+// so it reads exactly like the meters on the rig panels.
+function PowerMeter({ label, watts, maxWatts }: { label: string; watts: number; maxWatts: number }) {
+  return (
+    <MeterBar compact label={label} value={watts} unit="W" lo={0} hi={maxWatts}
+      display={`${Math.round(watts)} W`}
+      segColor={(f) => (f > 0.9 ? '#dc2626' : f > 0.75 ? '#f59e0b' : '#ea580c')} />
+  );
+}
+
+// usePeakHold keeps the highest reading seen for a short window, so a reading
+// sampled between two syllables doesn't collapse the meter. `live` is the key
+// part: pass false the moment the carrier drops and the held value is thrown
+// away at once — holding it there made releasing the PTT look like a five
+// second lag, which read as the whole app being slow.
+function usePeakHold(windowMs = 1000) {
+  const peak = useRef<Record<string, { v: number; t: number }>>({});
+  return (key: string, val: number, live = true) => {
+    if (!live) { delete peak.current[key]; return val; }
+    const now = Date.now();
+    const p = peak.current[key];
+    if (!p || val >= p.v || now - p.t > windowMs) { peak.current[key] = { v: val, t: now }; return val; }
+    return p.v;
+  };
+}
+
+// Stat — one small labelled figure (power, SWR, temperature).
+function Stat({ label, value, className }: { label: string; value: string; className?: string }) {
+  return (
+    <div className="rounded-lg border border-border bg-card/70 px-1.5 py-1 text-center">
+      <div className="text-[9px] uppercase tracking-wider text-muted-foreground leading-tight">{label}</div>
+      <div className={cn('text-sm font-bold font-mono leading-tight', className ?? 'text-foreground/80')}>{value}</div>
+    </div>
+  );
+}
+
+// OperateButton — the STANDBY/OPERATE toggle, identical in behaviour across the
+// three families (only where the state comes from differs).
+function OperateButton({ operate, disabled, onClick, t }: {
+  operate: boolean; disabled: boolean; onClick: () => void; t: (k: string, v?: any) => string;
+}) {
+  return (
+    <button type="button" disabled={disabled} onClick={onClick}
+      className={cn('w-full inline-flex items-center justify-center gap-1.5 rounded-lg text-xs font-bold py-1.5 border transition-all active:scale-[0.98] disabled:opacity-40',
+        operate
+          ? 'bg-gradient-to-b from-amber-400 to-amber-600 text-white border-amber-300/60 shadow-[0_0_9px_rgba(245,158,11,0.45)]'
+          : 'bg-card text-muted-foreground border-border hover:bg-muted hover:text-foreground')}>
+      <Power className="size-3.5" />
+      {operate ? t('ampw.operate') : t('ampw.standby')}
+    </button>
+  );
+}
+
+// AmpBlock — one amplifier inside the widget.
+function AmpBlock({ amp, flex, showName, t }: {
+  amp: Amp; flex: any; showName: boolean; t: (k: string, v?: any) => string;
+}) {
+  const spe = amp.spe, acom = amp.acom;
+  const hold = usePeakHold();
+
+  if (spe || acom) {
+    const s = spe || acom;
+    // The amp reports zero watts on receive, so its TX flag clears the meter as
+    // soon as the operator lets go — and the radio's own flag, when we have one,
+    // gets there first (the amp is polled on its own slower cycle).
+    const txing = typeof flex?.transmitting === 'boolean' ? flex.transmitting : s.tx !== false;
+    const w = hold('w', Number(spe ? s.output_w : s.fwd_w) || 0, txing);
+    const swr = Number(spe ? s.swr_ant : s.swr) || 0;
+    const hi = spe ? maxW(s.model) : (Number(s.max_w) || 800);
+    // Power ON drives the remote-on control lines, so it stays available while
+    // the amplifier is off and reporting nothing — but only over a serial link.
+    const canPowerOn = spe ? (s.connected || s.transport === 'serial') : (s.port_open && s.transport === 'serial');
+    return (
+      <div className="h-full flex flex-col gap-1.5">
+        {showName && (
+          <div className="flex items-center gap-1.5">
+            <span className={cn('size-1.5 rounded-full shrink-0', s.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
+            <span className="text-[10px] font-bold uppercase tracking-wider truncate">{amp.name || (spe ? 'SPE' : 'ACOM')}</span>
+            {s.connected && s.band && <span className="ml-auto text-[9px] text-muted-foreground shrink-0">{s.band}</span>}
+          </div>
+        )}
+        <OperateButton operate={!!s.operate} disabled={!s.connected} t={t}
+          onClick={() => AmpOperate(amp.id, !s.operate).catch(() => {})} />
+        <div className="flex gap-1.5">
+          <button type="button" disabled={!canPowerOn}
+            onClick={() => AmpPower(amp.id, true).catch(() => {})}
+            className="flex-1 rounded-lg border border-success/60 bg-card py-1 text-[11px] font-bold text-success hover:bg-success/15 disabled:opacity-30">
+            {t('ampw.on')}
+          </button>
+          <button type="button" disabled={!s.connected}
+            onClick={() => AmpPower(amp.id, false).catch(() => {})}
+            className="flex-1 rounded-lg border border-danger/60 bg-card py-1 text-[11px] font-bold text-danger hover:bg-danger/15 disabled:opacity-30">
+            {t('ampw.off')}
+          </button>
+        </div>
+        {/* Output level — SPE only; an ACOM has no L/M/H over CAT. */}
+        {spe && (
+          <div className="grid grid-cols-3 gap-1">
+            {(['L', 'M', 'H'] as const).map((lvl) => {
+              const active = (s.power_level || '').trim().toUpperCase() === lvl;
+              return (
+                <button key={lvl} type="button" disabled={!s.connected}
+                  onClick={() => AmpPowerLevel(amp.id, lvl).catch(() => {})}
+                  className={cn('rounded-md border py-0.5 text-[10px] font-bold transition-colors disabled:opacity-30',
+                    active ? 'bg-primary text-primary-foreground border-primary' : 'bg-card text-muted-foreground border-border hover:bg-muted')}>
+                  {t(`ampw.lvl${lvl}`)}
+                </button>
+              );
+            })}
+          </div>
+        )}
+        {s.connected ? (
+          <div className="grid grid-cols-3 gap-1">
+            <Stat label={t('ampw.pwr')} value={`${Math.round(w)}`} />
+            <Stat label={t('ampw.swr')} value={swr > 0 ? swr.toFixed(1) : '—'} className={swrColour(swr)} />
+            <Stat label={t('ampw.temp')} value={`${Number(s.temp_c) || 0}°`} />
+          </div>
+        ) : (
+          <div className="text-[10px] text-center text-muted-foreground italic py-1">{t('ampw.offline')}</div>
+        )}
+        {(s.warnings || s.alarms || s.err_text) && (
+          <div className="rounded-md border border-danger-border bg-danger-muted text-danger-muted-foreground text-[9px] px-1.5 py-0.5 text-center break-words">
+            {s.err_text || `${s.warnings || ''} ${s.alarms || ''}`.trim()}
+          </div>
+        )}
+        <PowerMeter label={t('flxp.outputPower')} watts={s.connected ? w : 0} maxWatts={hi} />
+      </div>
+    );
+  }
+
+  // PowerGenius XL: OPERATE and the meters come from the radio when the Flex
+  // reports the amp; the fan mode rides on our own GSCP link.
+  const pg = amp.pgxl || {};
+  const viaFlex = !!flex?.amp_available;
+  const operate = viaFlex ? !!flex?.amp_operate : !!pg.operate;
+  const connected = !!pg.connected || viaFlex;
+  const fault = flex?.amp_fault;
+  const meters = ((flex?.meters as any[]) || []).filter((m) => (m.src || '').toUpperCase().includes('AMP'));
+  const meter = (re: RegExp) => meters.find((m) => re.test((m.name || '').trim()));
+  const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
+  const fwd = meter(/^fwd|pwr/i);
+  const flexW = fwd ? (/dbm/i.test(fwd.unit || '') ? dbmToW(fwd.value) : fwd.value) : 0;
+  // Whether there is power is the RADIO's transmit flag: it flips the instant
+  // the PTT does, where the amplifier's own status poll answers a second and a
+  // half late and holds TRANSMIT past the carrier.
+  //
+  // How MUCH is the live reading — the radio's meter stream, or the amp's own
+  // forward figure when there is no Flex. NOT the amp's "peakfwd": that is a
+  // latched maximum which is never reset AND survives in the last-known status
+  // after the amp disconnects, so it reported 1350 W from an old transmission
+  // while the radio was putting out 10 W into a disconnected amplifier.
+  const txing = typeof flex?.transmitting === 'boolean'
+    ? flex.transmitting
+    : fwd ? flexW >= 1 : /TRANSMIT/i.test(pg.state || '');
+  const liveW = flexW > 0 ? flexW : (pg.connected ? Number(pg.fwd_w) || 0 : 0);
+  const fwdW = hold('fwd', txing ? liveW : 0, txing);
+  const id = meter(/^ID$|current/i);
+  // Live drain current, for the same reason: peak_id latches like peak_w.
+  const idA = id ? Number(id.value) : (txing ? Number(pg.id) || undefined : 0);
+  const temp = meter(/temp/i);
+  const tempC = pg.temperature > 0 ? pg.temperature : (temp ? temp.value : undefined);
+
+  return (
+    <div className="h-full flex flex-col gap-1.5">
+      {showName && (
+        <div className="flex items-center gap-1.5">
+          <span className={cn('size-1.5 rounded-full shrink-0', connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
+          <span className="text-[10px] font-bold uppercase tracking-wider truncate">{amp.name || 'PGXL'}</span>
+        </div>
+      )}
+      <OperateButton operate={operate} disabled={!connected} t={t}
+        onClick={() => (viaFlex ? FlexAmpOperate(!operate) : AmpOperate(amp.id, !operate)).catch(() => {})} />
+      {connected ? (
+        <div className="grid grid-cols-3 gap-1">
+          <Stat label={t('ampw.pwr')} value={`${Math.round(fwdW)}`} />
+          <Stat label={t('ampw.id')} value={idA != null ? idA.toFixed(1) : '—'} />
+          <Stat label={t('ampw.temp')} value={tempC != null ? `${Math.round(tempC)}°` : '—'} />
+        </div>
+      ) : (
+        <div className="text-[10px] text-center text-muted-foreground italic py-1">{t('ampw.offline')}</div>
+      )}
+      {(pg.host || pg.connected) && (
+        <select
+          disabled={!pg.connected}
+          value={(pg.fan_mode || 'CONTEST').toUpperCase()}
+          onChange={(e) => AmpFanMode(amp.id, e.target.value).catch(() => {})}
+          title={t('ampw.fan')}
+          className="w-full h-7 rounded-md border border-border bg-card px-1.5 text-[10px] font-semibold outline-none focus:border-warning disabled:opacity-40">
+          <option value="STANDARD">{t('flxp.fanStandard')}</option>
+          <option value="CONTEST">{t('flxp.fanContest')}</option>
+          <option value="BROADCAST">{t('flxp.fanBroadcast')}</option>
+        </select>
+      )}
+      {fault && fault !== 'NONE' && (
+        <div className="rounded-md border border-danger-border bg-danger-muted text-danger-muted-foreground text-[9px] px-1.5 py-0.5 text-center break-words">
+          {t('flxp.fault')}: {fault}
+        </div>
+      )}
+      <PowerMeter label={t('flxp.outputPower')} watts={connected ? fwdW : 0} maxWatts={2000} />
+    </div>
+  );
+}
+
+export function AmpWidget({ amps, flex, sel, onClose }: {
+  amps: Amp[];
+  flex: any;
+  sel: string; // "all" or an amp id
+  onClose: () => void;
+}) {
+  const { t } = useI18n();
+  // An id that no longer matches (the amp was removed in Settings) falls back to
+  // showing everything rather than an empty widget.
+  const shown = sel === 'all' ? amps : (amps.filter((a) => a.id === sel).length ? amps.filter((a) => a.id === sel) : amps);
+  const anyOnline = shown.some((a) => a.spe?.connected || a.acom?.connected || a.pgxl?.connected || flex?.amp_available);
+  const title = shown.length === 1 ? (shown[0].name || t('ampw.title')) : t('ampw.title');
+
+  return (
+    <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
+      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/40 shrink-0">
+        <Flame className={cn('size-4', anyOnline ? 'text-warning drop-shadow-[0_0_3px_rgba(245,158,11,0.55)]' : 'text-muted-foreground')} />
+        <span className="text-xs font-bold uppercase tracking-[0.18em] text-foreground/80 truncate">{title}</span>
+        <span className="flex-1" />
+        <button type="button" onClick={onClose} className="ml-1 text-muted-foreground hover:text-foreground transition-colors" title={t('ampw.close')}>
+          <X className="size-3.5" />
+        </button>
+      </div>
+      {/* Several amplifiers sit SIDE BY SIDE, one column each: stacked, two amps
+          made a widget taller than the dock row and both ended up half hidden. */}
+      <div className="flex-1 min-h-0 overflow-y-auto p-2.5">
+        {shown.length === 0 ? (
+          <div className="text-[11px] text-center text-muted-foreground italic py-2">{t('ampw.none')}</div>
+        ) : (
+          <div className="grid gap-2.5 h-full" style={{ gridTemplateColumns: `repeat(${shown.length}, minmax(0, 1fr))` }}>
+            {shown.map((a, i) => (
+              <div key={a.id} className={cn(i > 0 && 'pl-2.5 border-l border-border/50')}>
+                <AmpBlock amp={a} flex={flex} showName={shown.length > 1} t={t} />
+              </div>
+            ))}
+          </div>
+        )}
+      </div>
+    </div>
+  );
+}

frontend/src/components/AwardEditor.tsx

@@ -33,7 +33,7 @@ export type AwardDef = {
   code: string; name: string; description?: string; valid?: boolean; protected?: boolean;
   url?: string; download_url?: string; ref_url?: string; valid_from?: string; valid_to?: string; alias?: string;
   ref_display?: string; // grid column shows: ref | name | both
-  type?: string; field: string; match_by?: string; exact_match?: boolean; pattern: string;
+  type?: string; field: string; match_by?: string; exact_match?: boolean; one_ref_per_qso?: boolean; pattern: string;
   leading_str?: string; trailing_str?: string; dynamic?: boolean;
   or_rules?: AwardOrRule[];
   dxcc_filter: number[] | null; valid_bands?: string[]; valid_modes?: string[]; emission?: string[];
@@ -227,7 +227,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
   };
   type Explanation = {
     code: string; in_scope: boolean; scope_error?: string; predefined: boolean;
-    ref_count: number; steps: Step[]; manual?: string[]; result: string[];
+    ref_count: number; steps: Step[]; manual?: string[]; ambiguous?: string[]; result: string[];
   };
   type TestRow = { qso: any; explanation: Explanation };
   const [testCall, setTestCall] = useState('');
@@ -554,6 +554,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                         </div>
                       </Field2>
                       <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]"><Checkbox checked={!!cur.exact_match} onCheckedChange={(c) => patch({ exact_match: !!c })} /> {t('awed.exactMatch')}</label>
+                      <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]" title={t('awed.oneRefHint')}><Checkbox checked={!!cur.one_ref_per_qso} onCheckedChange={(c) => patch({ one_ref_per_qso: !!c })} /> {t('awed.oneRef')}</label>
                       <Field2 label={t('awed.patternRegex')}><Input className="h-8 font-mono text-xs" value={cur.pattern} onChange={(e) => patch({ pattern: e.target.value })} placeholder={t('awed.patternPlaceholder')} /></Field2>
                       <div className="grid grid-cols-2 gap-3">
                         <Field2 label={t('awed.leadingString')}><Input className="h-8 font-mono text-xs" value={cur.leading_str ?? ''} onChange={(e) => patch({ leading_str: e.target.value })} /></Field2>
@@ -708,6 +709,13 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                                   )}
                                 </div>
                               ))}
+                              {(ex.ambiguous ?? []).length > 0 && (
+                                <div className="px-3 py-2 text-xs">
+                                  <span className="font-semibold uppercase text-[10px] tracking-wide text-warning">{t('awed.testAmbiguous')}</span>{' '}
+                                  <span className="font-mono text-warning">{(ex.ambiguous ?? []).join(', ')}</span>{' '}
+                                  <span className="text-muted-foreground">{t('awed.testAmbiguousHint')}</span>
+                                </div>
+                              )}
                               {(ex.manual ?? []).length > 0 && (
                                 <div className="px-3 py-2 text-xs">
                                   <span className="font-semibold uppercase text-[10px] tracking-wide">{t('awed.testManual')}</span>{' '}

frontend/src/components/AwardsPanel.tsx

@@ -8,12 +8,15 @@ import { Select, SelectTrigger, SelectValue, SelectContent, SelectItem } from '@
 import { cn } from '@/lib/utils';
 import { AwardEditor } from '@/components/AwardEditor';
 import { useI18n } from '@/lib/i18n';
+import { writeUiPref } from '@/lib/uiPref';
 
 type BandCount = { band: string; worked: number; confirmed: number };
 type AwardRef = {
   ref: string; name?: string; group?: string; subgrp?: string;
   worked: boolean; confirmed: boolean; validated: boolean;
   bands: string[]; confirmed_bands: string[]; validated_bands: string[];
+  // Mode CLASSES — "CW" | "PHONE" | "DIGI" — not ADIF modes.
+  modes?: string[]; confirmed_modes?: string[];
 };
 type AwardResult = {
   code: string; name: string; dimension: string;
@@ -66,6 +69,9 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   const [awardList, setAwardList] = useState<AwardListItem[]>([]);
   // Computed results are cached per award code — each award is scanned only the
   // first time it's selected (or when explicitly rescanned).
+  // Keyed by "CODE|MODECLASS": the same award computed for CW and for all modes
+  // are different results, and caching them under one key showed the previous
+  // mode’s numbers after switching.
   const [byCode, setByCode] = useState<Record<string, AwardResult>>({});
   const [loading, setLoading] = useState(false);
   const [err, setErr] = useState('');
@@ -74,6 +80,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   const [editing, setEditing] = useState(false);
   const [view, setView] = useState<'grid' | 'list' | 'stats'>('grid');
   const [refFilter, setRefFilter] = useState<'all' | 'worked' | 'notworked' | 'worked_notconf'>('all');
+  // Mode filter, stacked ON TOP of the status one. "Worked on CW but not
+  // confirmed" is two questions at once, and answering only one of them is what
+  // sends an operator to a spreadsheet.
+  const [modeFilter, setModeFilter] = useState<'all' | 'CW' | 'PHONE' | 'DIGI'>('all');
   const [cell, setCell] = useState<{ ref: string; band: string; name?: string } | null>(null);
   const [showMissing, setShowMissing] = useState(false);
   const [stats, setStats] = useState<AwardStats | null>(null);
@@ -112,13 +122,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   // Compute one award (cached). force=true bypasses the cache (Rescan).
   async function compute(code: string, force = false) {
     if (!code) return;
-    if (!force && byCode[code]) { setSelected(code); return; }
+    const key = `${code}|${modeFilter}`;
+    if (!force && byCode[key]) { setSelected(code); return; }
     setSelected(code);
     setLoading(true);
     setErr('');
     try {
-      const r = (await GetAward(code)) as any as AwardResult;
-      setByCode((m) => ({ ...m, [code]: r }));
+      const r = (await GetAward(code, modeFilter === 'all' ? '' : modeFilter)) as any as AwardResult;
+      setByCode((m) => ({ ...m, [key]: r }));
     } catch (e: any) {
       setErr(String(e?.message ?? e));
     } finally {
@@ -142,7 +153,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   }
   useEffect(() => { loadList(); }, []);
 
-  const current = byCode[selected];
+  const current = byCode[`${selected}|${modeFilter}`];
+  // Recompute when the mode class changes: the bands, counts and confirmations
+  // all describe the selected mode, so they cannot be filtered client-side.
+  useEffect(() => { if (selected) compute(selected); /* eslint-disable-next-line react-hooks/exhaustive-deps */ }, [modeFilter]);
 
   // Bands relevant to the selected award, used by BOTH the grid and the stats
   // matrix so neither is padded with bands the award doesn't use. Rule: the
@@ -191,17 +205,62 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
     return idx.length ? idx : all;
   }, [stats, awardBands]);
 
+  // Sort order for the reference table. Reference is the default because that
+  // is how award lists are published and how an operator reads a paper list;
+  // description answers the other question — "have I worked anything in
+  // Alicante" — which reference order scatters across the whole table.
+  // Remembered through writeUiPref rather than localStorage, so the choice
+  // travels with a copied data/ folder like every other UI preference here.
+  const [refSort, setRefSort] = useState<'ref' | 'name'>(
+    () => (localStorage.getItem('opslog.awardRefSort') === 'name' ? 'name' : 'ref'));
+  const [refSortDir, setRefSortDir] = useState<'asc' | 'desc'>(
+    () => (localStorage.getItem('opslog.awardRefSortDir') === 'desc' ? 'desc' : 'asc'));
+  const toggleRefSort = (k: 'ref' | 'name') => {
+    if (k === refSort) {
+      const d = refSortDir === 'asc' ? 'desc' : 'asc';
+      setRefSortDir(d);
+      writeUiPref('opslog.awardRefSortDir', d);
+    } else {
+      setRefSort(k);
+      setRefSortDir('asc');
+      writeUiPref('opslog.awardRefSort', k);
+      writeUiPref('opslog.awardRefSortDir', 'asc');
+    }
+  };
+
   const filteredRefs = useMemo(() => {
     if (!current) return [];
     const q = refSearch.trim().toUpperCase();
-    return (current.refs ?? []).filter((r) => {
+    const rows = (current.refs ?? []).filter((r) => {
       if (refFilter === 'worked' && !r.worked) return false;
       if (refFilter === 'notworked' && r.worked) return false;
       if (refFilter === 'worked_notconf' && !(r.worked && !r.confirmed)) return false;
+      if (modeFilter !== 'all' && refFilter !== 'notworked') {
+        // A reference never worked has no mode, so "not worked" plus a mode is
+        // a contradiction: the mode filter stands aside rather than emptying
+        // the list.
+        if (!(r.modes ?? []).includes(modeFilter)) return false;
+        // Not-confirmed must mean not confirmed ON THIS MODE. An entity worked
+        // on CW and confirmed on SSB is still a CW entity to chase, and the
+        // whole point of the filter is to find those.
+        if (refFilter === 'worked_notconf' && (r.confirmed_modes ?? []).includes(modeFilter)) return false;
+      }
       if (q && !(r.ref.includes(q) || (r.name ?? '').toUpperCase().includes(q) || (r.group ?? '').toUpperCase().includes(q))) return false;
       return true;
     });
-  }, [current, refSearch, refFilter]);
+    const dir = refSortDir === 'asc' ? 1 : -1;
+    return rows.sort((a, b) => {
+      if (refSort === 'name') {
+        // localeCompare, not a byte comparison: these lists are Spanish, French
+        // and Italian place names, where "Ávila" belongs beside "Avilés" rather
+        // than after "Zaragoza".
+        const c = (a.name ?? '').localeCompare(b.name ?? '', undefined, { sensitivity: 'base' });
+        if (c !== 0) return c * dir;
+        return a.ref.localeCompare(b.ref) * dir; // stable tie-break
+      }
+      return a.ref.localeCompare(b.ref, undefined, { numeric: true }) * dir;
+    });
+  }, [current, refSearch, refFilter, modeFilter, refSort, refSortDir]);
 
   return (
     <div className="flex h-full min-h-0">
@@ -240,7 +299,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
         <div className="flex-1 overflow-auto">
           {err && <div className="p-3 text-xs text-destructive">{err}</div>}
           {awardList.map((a) => {
-            const r = byCode[a.code];
+            const r = byCode[`${a.code}|${modeFilter}`];
             return (
               <button
                 key={a.code}
@@ -325,6 +384,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                   </button>
                 ))}
               </div>
+              <div className="flex items-center rounded-md border border-border overflow-hidden text-sm">
+                {([['all', t('awp.filterAll')], ['CW', 'CW'], ['PHONE', t('awp.modePhone')], ['DIGI', t('awp.modeDigital')]] as const).map(([k, label]) => (
+                  <button key={k} onClick={() => setModeFilter(k)}
+                    className={cn('px-2 py-1', modeFilter === k ? 'bg-accent font-medium' : 'hover:bg-accent/50 text-muted-foreground')}>
+                    {label}
+                  </button>
+                ))}
+              </div>
               <span className="text-xs text-muted-foreground">{filteredRefs.length} {t('awp.refs')}</span>
               <button
                 onClick={() => setShowMissing(true)}
@@ -386,8 +453,18 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                 <table className="text-sm border-separate" style={{ borderSpacing: 0 }}>
                   <thead className="sticky top-0 z-10">
                     <tr className="bg-card">
-                      <th className="sticky left-0 z-20 bg-card text-left py-1.5 pr-2 font-medium border-b border-border w-24">{t('awp.ref')}</th>
-                      <th className="text-left py-1.5 pr-3 font-medium border-b border-border">{t('awp.description')}</th>
+                      <th className="sticky left-0 z-20 bg-card text-left py-1.5 pr-2 font-medium border-b border-border w-24">
+                        <button type="button" onClick={() => toggleRefSort('ref')} className="inline-flex items-center gap-1 hover:text-foreground">
+                          {t('awp.ref')}
+                          {refSort === 'ref' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                        </button>
+                      </th>
+                      <th className="text-left py-1.5 pr-3 font-medium border-b border-border">
+                        <button type="button" onClick={() => toggleRefSort('name')} className="inline-flex items-center gap-1 hover:text-foreground">
+                          {t('awp.description')}
+                          {refSort === 'name' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                        </button>
+                      </th>
                       {gridBands.map((b) => (
                         <th key={b} className="py-1.5 px-1 font-mono font-medium border-b border-border text-center w-11">{b}</th>
                       ))}
@@ -424,8 +501,18 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                 <table className="w-full text-sm">
                   <thead className="sticky top-0 bg-card">
                     <tr className="text-left text-muted-foreground border-b border-border">
-                      <th className="py-1.5 pr-2 font-medium w-24">{t('awp.ref')}</th>
-                      <th className="py-1.5 pr-2 font-medium">{t('awp.name')}</th>
+                      <th className="py-1.5 pr-2 font-medium w-24">
+                        <button type="button" onClick={() => toggleRefSort('ref')} className="inline-flex items-center gap-1 hover:text-foreground">
+                          {t('awp.ref')}
+                          {refSort === 'ref' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                        </button>
+                      </th>
+                      <th className="py-1.5 pr-2 font-medium">
+                        <button type="button" onClick={() => toggleRefSort('name')} className="inline-flex items-center gap-1 hover:text-foreground">
+                          {t('awp.name')}
+                          {refSort === 'name' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                        </button>
+                      </th>
                       <th className="py-1.5 pr-2 font-medium w-40">{t('awp.groupCol')}</th>
                       <th className="py-1.5 pr-2 font-medium w-24">{t('awp.status')}</th>
                       <th className="py-1.5 font-medium">{t('awp.bands')}</th>
@@ -459,7 +546,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
       </div>
 
       {cell && current && (
-        <CellQSOModal code={current.code} cell={cell} onClose={() => setCell(null)} />
+        <CellQSOModal code={current.code} cell={cell} modeClass={modeFilter === 'all' ? '' : modeFilter} onClose={() => setCell(null)} />
       )}
       {showMissing && current && (
         <MissingQSOModal code={current.code} name={current.name} onClose={() => setShowMissing(false)} onEditQSO={onEditQSO} />
@@ -644,17 +731,17 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
 }
 
 // CellQSOModal lists the QSOs behind one award-grid cell (reference × band).
-function CellQSOModal({ code, cell, onClose }: { code: string; cell: { ref: string; band: string; name?: string }; onClose: () => void }) {
+function CellQSOModal({ code, cell, modeClass, onClose }: { code: string; cell: { ref: string; band: string; name?: string }; modeClass: string; onClose: () => void }) {
   const { t } = useI18n();
   const [qsos, setQsos] = useState<any[]>([]);
   const [loading, setLoading] = useState(true);
   useEffect(() => {
     setLoading(true);
-    AwardCellQSOs(code, cell.ref, cell.band)
+    AwardCellQSOs(code, cell.ref, cell.band, modeClass)
       .then((r) => setQsos((r ?? []) as any))
       .catch(() => setQsos([]))
       .finally(() => setLoading(false));
-  }, [code, cell.ref, cell.band]);
+  }, [code, cell.ref, cell.band, modeClass]);
 
   const fmt = (s: any) => { const d = new Date(s); return isNaN(d.getTime()) ? '' : d.toISOString().slice(0, 16).replace('T', ' '); };
 

frontend/src/components/DetailsPanel.tsx

@@ -1,5 +1,5 @@
 import { useEffect, useMemo, useState } from 'react';
-import { ComputeQSOAwardRefs } from '../../wailsjs/go/main/App';
+import { ComputeQSOAwardRefs, IsNewUSCounty } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { Label } from '@/components/ui/label';
 import { Checkbox } from '@/components/ui/checkbox';
@@ -53,6 +53,14 @@ interface Props {
   prefix: string;
   operatorGrid: string;   // station.my_grid — origin for bearing/distance
   remoteGrid: string;     // entry-strip Grid value — destination
+  // Entry-strip text fields. Live award detection matches on these too — a DARC
+  // DOK keys off QTH, not the address — and sending only the address meant such
+  // an award stayed silent until the QSO was logged.
+  qth?: string;
+  name?: string;
+  country?: string;
+  comment?: string;
+  note?: string;
   details: DetailsState;
   onChange: (patch: Partial<DetailsState>) => void;
   // Stats (F1) tab content: the worked-before matrix + optional QRZ image.
@@ -113,28 +121,57 @@ function numOrUndef(v: string): number | undefined {
   return isNaN(n) ? undefined : n;
 }
 
+// Column spans written out rather than built as `col-span-${n}`: Tailwind scans
+// for literal class names, so an interpolated one is never emitted.
+const SPAN_CLASS: Record<number, string> = {
+  1: '', 2: 'col-span-2', 3: 'col-span-3', 4: 'col-span-4', 5: 'col-span-5',
+  6: 'col-span-6', 7: 'col-span-7', 8: 'col-span-8', 9: 'col-span-9',
+  10: 'col-span-10', 11: 'col-span-11', 12: 'col-span-12',
+};
+
 // Compact field helper to keep the JSX dense.
-function Field({ label, span = 1, children }: { label: string; span?: 1 | 2 | 3 | 4 | 6; children: React.ReactNode }) {
+function Field({ label, span = 1, className, children }: { label: string; span?: number; className?: string; children: React.ReactNode }) {
   return (
-    <div className={cn('flex flex-col min-w-0', span === 2 && 'col-span-2', span === 3 && 'col-span-3', span === 4 && 'col-span-4', span === 6 && 'col-span-6')}>
+    <div className={cn('flex flex-col min-w-0', SPAN_CLASS[span], className)}>
       <Label className="mb-1">{label}</Label>
       {children}
     </div>
   );
 }
 
-export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
+export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
   const { t } = useI18n();
   const [internalOpen, setInternalOpen] = useState<TabName>('stats');
   const open = tab ?? internalOpen; // controlled when `tab` is provided
 
   // Live award detection: run the SAME engine used at log time over the current
-  // contact (callsign + looked-up address/state/zones) so award references the
-  // QSO will earn — e.g. WAPC matching "Beijing" inside the address — are
-  // surfaced and auto-added the moment you enter a call or click a spot, instead
-  // of only appearing after logging. Pickable matches are merged into award_refs
+  // contact — callsign, the looked-up address/state/zones AND the entry-strip
+  // text (QTH, name, country, comment, note, grid). Sending only the address was
+  // a silent hole: a DARC DOK matches on QTH, so "Aachen" produced nothing here
+  // while the award editor's Test tab, which passes the whole QSO, matched it.
+  // References the QSO will earn — WAPC matching "Beijing" inside the address,
+  // a DOK matching the town — are surfaced and auto-added the moment you enter a
+  // call or click a spot, instead of only appearing after logging. Pickable
+  // matches are merged into award_refs
   // (idempotent; award_refs is NOT a dependency, so removing one by hand sticks).
-  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean }>>([]);
+  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean; ambiguous?: boolean }>>([]);
+
+  // NEW badge on the county: the same question the cluster's NEW CTY badge
+  // answers, for the station being worked right now. Debounced because the
+  // county field is typed into as well as filled by the lookup.
+  const [newCounty, setNewCounty] = useState(false);
+  useEffect(() => {
+    const cnty = (details.cnty ?? '').trim();
+    if (!cnty) { setNewCounty(false); return; }
+    let alive = true;
+    const id = window.setTimeout(async () => {
+      try {
+        const isNew = await IsNewUSCounty(details.state ?? '', cnty);
+        if (alive) setNewCounty(!!isNew);
+      } catch { if (alive) setNewCounty(false); }
+    }, 300);
+    return () => { alive = false; window.clearTimeout(id); };
+  }, [details.state, details.cnty]);
   useEffect(() => {
     if (open !== 'awards' || !callsign.trim()) { setDetected([]); return; }
     const t = window.setTimeout(async () => {
@@ -142,6 +179,8 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const q: any = {
           callsign, band, mode,
           address: details.address ?? '', state: details.state ?? '', cnty: details.cnty ?? '',
+          qth: qth ?? '', name: name ?? '', country: country ?? '',
+          comment: comment ?? '', notes: note ?? '', grid: remoteGrid ?? '',
           cont: details.cont ?? '', dxcc: details.dxcc, cqz: details.cqz, ituz: details.ituz,
           qso_date: new Date().toISOString(),
         };
@@ -151,7 +190,9 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const have = new Set(cur.split(';').filter(Boolean));
         let next = cur;
         for (const r of all) {
-          if (!r.pickable) continue;
+          // An ambiguous candidate is offered, never auto-added: adding one would
+          // be the guess the award's "one reference per QSO" setting exists to refuse.
+          if (!r.pickable || r.ambiguous) continue;
           const entry = `${String(r.code).toUpperCase()}@${String(r.ref).toUpperCase()}`;
           if (!have.has(entry)) { next = next ? `${next};${entry}` : entry; have.add(entry); }
         }
@@ -160,7 +201,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
     }, 400);
     return () => window.clearTimeout(t);
     // eslint-disable-next-line react-hooks/exhaustive-deps
-  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, band, mode]);
+  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, qth, name, country, comment, note, remoteGrid, band, mode]);
   // Bearing/distance from operator's home grid to the remote station.
   // Recomputed only when either grid actually changes.
   const path = useMemo(() => {
@@ -227,14 +268,26 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
       )}
 
       {open === 'info' && (
-        <div className="grid grid-cols-6 gap-2 px-3 py-2.5">
-          <Field label={t('detp.statePref')}>
+        <div className="grid grid-cols-12 gap-2 px-3 py-2.5">
+          {/* Twelve columns, not six: the fields hold very different things. A US
+              county name is long, a CQ zone is two digits — on an even six-column
+              grid they were the same width, so the county truncated while the
+              zones sat mostly empty. */}
+          <Field label={t('detp.statePref')} span={2}>
             <Input value={details.state} onChange={(e) => onChange({ state: e.target.value })} />
           </Field>
-          <Field label={t('detp.county')}>
-            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} />
+          <Field label={t('detp.county')} span={4} className="relative">
+            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} className={cn(newCounty && 'pr-14')} />
+            {newCounty && (
+              <span
+                title={t('detp.newCountyTip')}
+                className="absolute right-1.5 bottom-1.5 rounded px-1.5 py-0.5 text-[10px] font-bold tracking-wide bg-success text-success-foreground pointer-events-none"
+              >
+                {t('detp.newCounty')}
+              </span>
+            )}
           </Field>
-          <Field label={t('detp.prefix')}>
+          <Field label={t('detp.prefix')} span={2}>
             <Input className="font-mono uppercase" value={prefix} readOnly tabIndex={-1} />
           </Field>
           <Field label={t('detp.cqZone')}>
@@ -248,7 +301,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
           {/* DXCC # closes the top row (next to the zones); Continent and
               Azimuth SP live in the main entry strip / bandeau. The long-path
               bearing and distances move to the row below. */}
-          <Field label={t('detp.dxcc')}>
+          <Field label={t('detp.dxcc')} span={2}>
             <Input
               readOnly
               tabIndex={-1}
@@ -257,7 +310,11 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
               placeholder="—"
             />
           </Field>
-          <Field label={t('detp.azimuthLp')}>
+          {/* The bearing and the two distances are read-only and hold at most
+              "12345 km", so they take a fixed width and the address — the one
+              field here that is never wide enough — gets everything left over. */}
+          <div className="col-span-12 flex gap-2">
+            <Field label={t('detp.azimuthLp')} className="w-20 shrink-0">
               <Input
                 readOnly
                 tabIndex={-1}
@@ -266,7 +323,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
                 placeholder="—"
               />
             </Field>
-          <Field label={t('detp.distanceSp')}>
+            <Field label={t('detp.distanceSp')} className="w-24 shrink-0">
               <Input
                 readOnly
                 tabIndex={-1}
@@ -275,7 +332,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
                 placeholder="—"
               />
             </Field>
-          <Field label={t('detp.distanceLp')}>
+            <Field label={t('detp.distanceLp')} className="w-24 shrink-0">
               <Input
                 readOnly
                 tabIndex={-1}
@@ -284,13 +341,14 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
                 placeholder="—"
               />
             </Field>
-          <Field label={t('detp.address')} span={3}>
+            <Field label={t('detp.address')} className="flex-1 min-w-0">
               <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
             </Field>
-          <Field label={t('detp.qslMessage')} span={3}>
+          </div>
+          <Field label={t('detp.qslMessage')} span={7}>
             <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
           </Field>
-          <Field label={t('detp.qslVia')} span={2}>
+          <Field label={t('detp.qslVia')} span={5}>
             <Input value={details.qsl_via} onChange={(e) => onChange({ qsl_via: e.target.value })} />
           </Field>
         </div>
@@ -305,10 +363,37 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
             fieldValues={{ state: details.state ?? '', cnty: details.cnty ?? '' }}
             heightClass="flex-1 min-h-0"
           />
-          {detected.length > 0 && (
+          {/* Ambiguous candidates: the award allows one reference per QSO and
+              several matched, so none was kept. Click one to settle it while the
+              contact is still in front of you. */}
+          {detected.some((r) => r.ambiguous) && (
+            <div className="mt-2 text-[11px] shrink-0 leading-snug border-t border-warning/40 pt-1.5">
+              <span className="font-medium text-warning">{t('detp.ambiguous')}</span>{' '}
+              {detected.filter((r) => r.ambiguous).map((r) => (
+                <button
+                  key={`amb-${r.code}@${r.ref}`}
+                  type="button"
+                  title={r.name ?? ''}
+                  onClick={() => {
+                    const entry = `${r.code.toUpperCase()}@${r.ref.toUpperCase()}`;
+                    const cur = details.award_refs ?? '';
+                    // Only one of the candidates can be right — replace any
+                    // sibling already picked for this award rather than stacking.
+                    const kept = cur.split(';').filter((e) => e && e.split('@')[0].toUpperCase() !== r.code.toUpperCase());
+                    onChange({ award_refs: [...kept, entry].join(';') });
+                    setDetected((d) => d.filter((x) => !x.ambiguous || x.code.toUpperCase() !== r.code.toUpperCase()));
+                  }}
+                  className="inline-block mr-1.5 px-1.5 py-0.5 rounded font-mono whitespace-nowrap border border-warning/50 text-warning hover:bg-warning/10"
+                >
+                  {r.code}@{r.ref}{r.name ? ` — ${r.name}` : ''}
+                </button>
+              ))}
+            </div>
+          )}
+          {detected.some((r) => !r.ambiguous) && (
             <div className="mt-2 text-[11px] text-muted-foreground shrink-0 max-h-14 overflow-y-auto leading-snug border-t border-border/50 pt-1.5">
               <span className="font-medium text-foreground/70">{t('detp.detected')}</span>{' '}
-              {detected.map((r) => (
+              {detected.filter((r) => !r.ambiguous).map((r) => (
                 <span key={`${r.code}@${r.ref}`} className="inline-block mr-1.5 font-mono whitespace-nowrap" title={r.name ?? ''}>
                   <span className="text-foreground/80">{r.code}{r.ref ? `@${r.ref}` : ''}</span>
                 </span>

frontend/src/components/FlexPanel.tsx

@@ -323,13 +323,15 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
     }
     // eslint-disable-next-line react-hooks/exhaustive-deps
   }, [st.cw_speed]);
-  // Peak-hold: keep the highest reading for ~2 s so the jittery VITA-49 meters
-  // read steadily instead of jumping every poll.
+  // Peak-hold: keep the highest reading for a second so the jittery VITA-49
+  // meters read steadily instead of jumping every poll. One second, not two —
+  // longer and the meters visibly trail the end of a transmission, which reads
+  // as the app lagging rather than as a peak being held.
   const peak = useRef<Record<string, { v: number; t: number }>>({});
-  const peakHold = (key: string, val: number) => {
+  const peakHold = (key: string, val: number, windowMs = 1000) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > windowMs) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
@@ -355,7 +357,7 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
   }, []);
 
   // PowerGenius XL direct connection (fan mode), independent of the Flex link.
-  const [pg, setPg] = useState<{ connected: boolean; fan_mode?: string; host?: string; last_error?: string }>({ connected: false });
+  const [pg, setPg] = useState<{ connected: boolean; fan_mode?: string; host?: string; last_error?: string; state?: string; peak_w?: number }>({ connected: false });
   useEffect(() => {
     let alive = true;
     const tick = async () => { try { const s: any = await GetPGXLStatus(); if (alive) setPg(s || { connected: false }); } catch {} };
@@ -978,10 +980,12 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   spe.operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
                 {spe.operate ? 'OPERATE' : 'STANDBY'}
               </button>
-              {/* Power ON / OFF (best-guess keystrokes from the APG — verify on hw). */}
+              {/* Power ON pulses RTS then DTR — it must stay clickable while the amp
+                  is off (no status = not "connected"), and serial only. */}
               <div className="inline-flex rounded-lg overflow-hidden border-2 border-success/70">
-                <button type="button" disabled={!spe.connected}
+                <button type="button" disabled={!(spe.connected || spe.transport === 'serial')}
                   onClick={() => AmpPower(selAmp.id, true).catch(() => {})}
+                  title={spe.transport === 'serial' ? 'Power on (RTS then DTR pulse)' : 'Power-on needs the serial RTS/DTR lines — not available over a network bridge'}
                   className="px-3 py-2 text-sm font-bold bg-card text-success hover:bg-success/15 disabled:opacity-30">ON</button>
                 <button type="button" disabled={!spe.connected}
                   onClick={() => AmpPower(selAmp.id, false).catch(() => {})}
@@ -1083,9 +1087,6 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   st.amp_operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
                 {st.amp_operate ? 'OPERATE' : 'STANDBY'}
               </button>
-              <span className="text-xs text-muted-foreground">
-                {st.amp_operate ? t('flxp.ampInLine') : t('flxp.ampBypassed')}
-              </span>
               {/* Fan mode — shown when the PowerGenius is configured (Settings →
                   PowerGenius). The dot shows the direct-connection state; the
                   selector is disabled until connected (hover it for the error). */}
@@ -1118,6 +1119,12 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
               const amp = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
                 && !/^(RL|DRV)$/i.test((m.name || '').trim()));
               if (off || amp.length === 0) return null;
+              // Power comes from the radio's meter stream and nothing else. The
+              // amplifier also reports a "peakfwd", and using it was a mistake
+              // twice over: it is a latched maximum that is never reset, and it
+              // survives in the last-known status after the amp disconnects — so
+              // it claimed 1350 W from an old transmission while the radio was
+              // putting out 10.
               return (
                 <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
                   {amp.map((m) => {

frontend/src/components/MainMap.tsx

@@ -1,6 +1,7 @@
 import { useEffect, useRef, useState } from 'react';
 import L from 'leaflet';
 import 'leaflet/dist/leaflet.css';
+import { nightPolygon } from '../lib/greyline';
 import { gridToLatLon, gridSquareBounds, greatCirclePoints, pathBetween, destinationPoint } from '@/lib/maidenhead';
 import { writeUiPref } from '@/lib/uiPref';
 
@@ -115,6 +116,12 @@ export function WorldMap({ fromGrid, toGrid, fromLabel, toLabel, beamAzimuths, b
   // pans/zooms freely (e.g. a whole-world view) and the view is remembered
   // across restarts. Default on.
   const [autoZoom, setAutoZoom] = useState(() => localStorage.getItem('opslog.mapAutoZoomDX') !== '0');
+
+  // Grey line — the day/night terminator with its twilight band. Off by
+  // default: it is a working tool for the operator who wants it, not decoration
+  // for the one who does not.
+  const [greyline, setGreyline] = useState(() => localStorage.getItem('opslog.mapGreyline') === '1');
+  const greylineLayer = useRef<L.LayerGroup | null>(null);
   const autoZoomRef = useRef(autoZoom);
   useEffect(() => { autoZoomRef.current = autoZoom; }, [autoZoom]);
 
@@ -152,6 +159,80 @@ export function WorldMap({ fromGrid, toGrid, fromLabel, toLabel, beamAzimuths, b
     if (m) addBasemap(m, basemap, baseLayer, labelsLayer);
   }, [basemap]);
 
+  // Draw the grey line, and keep it moving.
+  //
+  // Redrawn every minute: the terminator travels a quarter of a degree in that
+  // time, which is invisible, but a map left on all day would otherwise be
+  // silently wrong by evening — and the whole point of the display is knowing
+  // where the line is NOW.
+  //
+  // It lives in its own pane below the overlay pane so the path and beam are
+  // never hidden behind the shading, and is non-interactive so it can never
+  // swallow a click meant for the map.
+  useEffect(() => {
+    const m = worldMap.current;
+    if (!m) return;
+
+    if (!greyline) {
+      greylineLayer.current?.remove();
+      greylineLayer.current = null;
+      return;
+    }
+
+    if (!m.getPane('greyline')) {
+      const pane = m.createPane('greyline');
+      pane.style.zIndex = '350';        // above tiles (200), below overlays (400)
+      pane.style.pointerEvents = 'none';
+    }
+
+    const draw = () => {
+      const now = new Date();
+      greylineLayer.current?.remove();
+      const g = L.layerGroup([], { pane: 'greyline' });
+
+      // The rings span −180…+180 once, but this map repeats the world sideways
+      // (worldCopyJump, and zoomed out several copies are on screen at once). A
+      // single ring therefore ends in a hard vertical edge wherever a copy
+      // begins — the shading looked like a rectangle laid over the planet.
+      //
+      // So each ring is drawn again shifted a full turn either way. Three copies
+      // cover every zoom level this map reaches; they cost nothing, being three
+      // polygons on a canvas layer.
+      const COPIES = [-360, 0, 360];
+      const shifted = (ring: [number, number][], by: number): [number, number][] =>
+        by === 0 ? ring : ring.map(([lat, lon]) => [lat, lon + by] as [number, number]);
+
+      // Two bands, drawn dark-to-light so they read as one gradient into night:
+      // full darkness (Sun below the horizon) and civil twilight (down to −6°),
+      // which is the band operators actually mean by "grey line".
+      const nightRing = nightPolygon(now, 0);
+      const twilightRing = nightPolygon(now, -6);
+      // The terminator itself, so the line is readable at a glance rather than
+      // being inferred from where the shading fades. Dropping the last two
+      // points leaves the terminator alone, without the segment that closes the
+      // polygon along the dark pole.
+      const lineRing = nightRing.slice(0, -2);
+
+      for (const by of COPIES) {
+        L.polygon(shifted(twilightRing, by), {
+          pane: 'greyline', stroke: false, fillColor: '#0b1220', fillOpacity: 0.22, interactive: false,
+        }).addTo(g);
+        L.polygon(shifted(nightRing, by), {
+          pane: 'greyline', stroke: false, fillColor: '#0b1220', fillOpacity: 0.32, interactive: false,
+        }).addTo(g);
+        L.polyline(shifted(lineRing, by), {
+          pane: 'greyline', color: '#f59e0b', weight: 1, opacity: 0.75, interactive: false,
+        }).addTo(g);
+      }
+      g.addTo(m);
+      greylineLayer.current = g;
+    };
+
+    draw();
+    const id = window.setInterval(draw, 60_000);
+    return () => { window.clearInterval(id); };
+  }, [greyline]);
+
   // Redraw overlays whenever the operator/DX grids (or beam) change.
   useEffect(() => {
     const wm = worldMap.current, wo = worldOverlay.current;
@@ -293,6 +374,21 @@ export function WorldMap({ fromGrid, toGrid, fromLabel, toLabel, beamAzimuths, b
       >
         Zoom DX
       </button>
+      {/* Grey line toggle, under the zoom button. */}
+      <button
+        type="button"
+        onClick={() => {
+          const v = !greyline;
+          setGreyline(v);
+          writeUiPref('opslog.mapGreyline', v ? '1' : '0');
+        }}
+        title={greyline ? 'Grey line is ON — day/night terminator and twilight band' : 'Show the grey line (day/night terminator)'}
+        className={`absolute top-9 right-1 z-[500] rounded-md px-2 py-1 text-[11px] font-medium shadow border backdrop-blur transition-colors ${
+          greyline ? 'bg-primary text-primary-foreground border-primary' : 'bg-card/90 text-muted-foreground border-border hover:bg-card'
+        }`}
+      >
+        Grey line
+      </button>
       {path && (
         <div className="absolute bottom-1 left-1 z-[500] rounded-md bg-card/90 backdrop-blur px-2 py-1 text-[11px] font-mono shadow border border-border pointer-events-none">
           <div><span className="text-muted-foreground">Dist</span> {Math.round(path.distanceShort).toLocaleString()} km

frontend/src/components/QSOContextMenu.tsx

@@ -1,4 +1,4 @@
-import { useEffect } from 'react';
+import { useEffect, useLayoutEffect, useRef, useState } from 'react';
 import { Globe2, RefreshCw, Upload, BadgeCheck, Mail, FileDown, PencilLine, Trash2 } from 'lucide-react';
 import { useI18n } from '@/lib/i18n';
 
@@ -38,6 +38,12 @@ const UPLOAD_TARGETS: { service: string; name: string }[] = [
 // which used to dismiss the menu the instant it appeared.)
 export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete }: Props) {
   const { t } = useI18n();
+  const boxRef = useRef<HTMLDivElement>(null);
+  // Starts at the cursor; the layout effect corrects it once the real size is
+  // known. Rendering at the cursor first avoids a visible jump for the common
+  // case where it already fits.
+  const [pos, setPos] = useState({ x: 0, y: 0 });
+  useEffect(() => { if (menu) setPos({ x: menu.x, y: menu.y }); }, [menu]);
   useEffect(() => {
     if (!menu) return;
     const close = () => onClose();
@@ -50,16 +56,40 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
     };
   }, [menu, onClose]);
 
+  // Position AFTER measuring.
+  //
+  // The menu used to be clamped against a guessed height — 230 px when the
+  // upload submenu was present, 110 otherwise. It is far taller than that with
+  // a selection, so right-clicking near the bottom of the window cut half the
+  // entries off. Its height also depends on which actions the caller passes, so
+  // no constant can be right for long.
+  //
+  // Measured instead: if it does not fit below the cursor it is placed above,
+  // and failing that pinned to the top with its own scrollbar.
+  useLayoutEffect(() => {
+    if (!menu || !boxRef.current) return;
+    const r = boxRef.current.getBoundingClientRect();
+    const pad = 6;
+    let x = menu.x;
+    let y = menu.y;
+    if (x + r.width > window.innerWidth - pad) {
+      x = Math.max(pad, window.innerWidth - r.width - pad);
+    }
+    if (y + r.height > window.innerHeight - pad) {
+      // Above the cursor, if there is room there.
+      y = menu.y - r.height >= pad ? menu.y - r.height : Math.max(pad, window.innerHeight - r.height - pad);
+    }
+    setPos({ x, y });
+  }, [menu, onSendTo]);
+
   if (!menu) return null;
   const n = menu.ids.length;
-  // Keep the menu on-screen near the cursor.
-  const x = Math.min(menu.x, window.innerWidth - 248);
-  const y = Math.min(menu.y, window.innerHeight - (onSendTo ? 230 : 110));
 
   return (
     <div
-      className="fixed z-[200] min-w-[240px] rounded-md border border-border bg-popover shadow-lg py-1 text-sm"
-      style={{ left: x, top: y }}
+      ref={boxRef}
+      className="fixed z-[200] min-w-[240px] max-h-[85vh] overflow-y-auto rounded-md border border-border bg-popover shadow-lg py-1 text-sm"
+      style={{ left: pos.x, top: pos.y }}
       onMouseDown={(e) => e.stopPropagation()}
     >
       <div className="px-3 py-1 text-[11px] uppercase tracking-wider text-muted-foreground">

frontend/src/components/RecentQSOsGrid.tsx

@@ -4,6 +4,8 @@ import {
   type ColDef, type ColumnState, type GridReadyEvent, type RowDoubleClickedEvent,
 } from 'ag-grid-community';
 import { hamlogGridTheme } from '@/lib/gridTheme';
+import { qslStatusCellClass } from '@/lib/qslStatus';
+import { formatDateTimeUTC, formatDateOnly, getDateFormat, subscribeDateFormat } from '@/lib/dateFormat';
 import { AgGridReact } from 'ag-grid-react';
 import { Columns3, FilterX, ListChecks } from 'lucide-react';
 import type { QSOForm } from '@/types';
@@ -85,23 +87,13 @@ function fmtMhzDots(hz?: number): string {
   return `${i}.${f.slice(0, 3)}.${f.slice(3, 6)}`;
 }
 
+// Both formatters follow the display preference (Settings → General). What is
+// STORED never changes — see lib/dateFormat.
 function fmtDateUTC(s: any): string {
-  if (!s) return '';
-  const d = new Date(s);
-  if (isNaN(d.getTime())) return s;
-  const p = (n: number) => String(n).padStart(2, '0');
-  return `${d.getUTCFullYear()}-${p(d.getUTCMonth() + 1)}-${p(d.getUTCDate())} ${p(d.getUTCHours())}:${p(d.getUTCMinutes())}`;
+  return formatDateTimeUTC(s);
 }
 function fmtDateOnly(s: any): string {
-  if (!s) return '';
-  const t = String(s).trim();
-  // QSL/LoTW/eQSL/ClubLog dates are ADIF YYYYMMDD; upload dates may be ISO.
-  const m = t.match(/^(\d{4})(\d{2})(\d{2})/);
-  if (m) return `${m[1]}-${m[2]}-${m[3]}`;
-  const d = new Date(t);
-  if (isNaN(d.getTime())) return t;
-  const p = (n: number) => String(n).padStart(2, '0');
-  return `${d.getUTCFullYear()}-${p(d.getUTCMonth() + 1)}-${p(d.getUTCDate())}`;
+  return formatDateOnly(s);
 }
 
 // Full catalog of selectable columns, grouped for the picker. `defaultVisible`
@@ -178,8 +170,8 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'Contacted', label: t('rqg.c.web'),      colId: 'web',      headerName: t('rqg.c.web'),      field: 'web' as any,      width: 180 },
 
   // ── QSL ──
-  { group: 'QSL',  label: t('rqg.c.qsl_sent'),     colId: 'qsl_sent',      headerName: t('rqg.c.qsl_sent'),   field: 'qsl_sent' as any,      width: 80 },
-  { group: 'QSL',  label: t('rqg.c.qsl_rcvd'),     colId: 'qsl_rcvd',      headerName: t('rqg.c.qsl_rcvd'),   field: 'qsl_rcvd' as any,      width: 80 },
+  { group: 'QSL',  label: t('rqg.c.qsl_sent'),     colId: 'qsl_sent',      headerName: t('rqg.c.qsl_sent'),   field: 'qsl_sent' as any,      width: 80 , cellClass: qslStatusCellClass },
+  { group: 'QSL',  label: t('rqg.c.qsl_rcvd'),     colId: 'qsl_rcvd',      headerName: t('rqg.c.qsl_rcvd'),   field: 'qsl_rcvd' as any,      width: 80 , cellClass: qslStatusCellClass },
   { group: 'QSL',  label: t('rqg.c.qsl_sent_date'),colId: 'qsl_sent_date', headerName: t('rqg.h.qsl_sent_date'), field: 'qsl_sent_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'QSL',  label: t('rqg.c.qsl_rcvd_date'),colId: 'qsl_rcvd_date', headerName: t('rqg.h.qsl_rcvd_date'), field: 'qsl_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'QSL',  label: t('rqg.c.qsl_via'),      colId: 'qsl_via',       headerName: t('rqg.c.qsl_via'),    field: 'qsl_via' as any,       width: 130 },
@@ -187,32 +179,32 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'QSL',  label: t('rqg.c.qslmsg_rcvd'), colId: 'qslmsg_rcvd',   headerName: t('rqg.c.qslmsg_rcvd'), field: 'qslmsg_rcvd' as any, width: 200 },
 
   // ── LoTW ──
-  { group: 'LoTW', label: t('rqg.c.lotw_sent'),      colId: 'lotw_sent',      headerName: t('rqg.c.lotw_sent'), field: 'lotw_sent' as any,      width: 80 },
-  { group: 'LoTW', label: t('rqg.c.lotw_rcvd'),      colId: 'lotw_rcvd',      headerName: t('rqg.c.lotw_rcvd'), field: 'lotw_rcvd' as any,      width: 80 },
+  { group: 'LoTW', label: t('rqg.c.lotw_sent'),      colId: 'lotw_sent',      headerName: t('rqg.c.lotw_sent'), field: 'lotw_sent' as any,      width: 80 , cellClass: qslStatusCellClass },
+  { group: 'LoTW', label: t('rqg.c.lotw_rcvd'),      colId: 'lotw_rcvd',      headerName: t('rqg.c.lotw_rcvd'), field: 'lotw_rcvd' as any,      width: 80 , cellClass: qslStatusCellClass },
   { group: 'LoTW', label: t('rqg.c.lotw_sent_date'), colId: 'lotw_sent_date', headerName: t('rqg.h.lotw_sent_date'), field: 'lotw_sent_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'LoTW', label: t('rqg.c.lotw_rcvd_date'), colId: 'lotw_rcvd_date', headerName: t('rqg.h.lotw_rcvd_date'), field: 'lotw_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
 
   // ── eQSL ──
-  { group: 'eQSL', label: t('rqg.c.eqsl_sent'),      colId: 'eqsl_sent',      headerName: t('rqg.c.eqsl_sent'), field: 'eqsl_sent' as any,      width: 80 },
-  { group: 'eQSL', label: t('rqg.c.eqsl_rcvd'),      colId: 'eqsl_rcvd',      headerName: t('rqg.c.eqsl_rcvd'), field: 'eqsl_rcvd' as any,      width: 80 },
+  { group: 'eQSL', label: t('rqg.c.eqsl_sent'),      colId: 'eqsl_sent',      headerName: t('rqg.c.eqsl_sent'), field: 'eqsl_sent' as any,      width: 80 , cellClass: qslStatusCellClass },
+  { group: 'eQSL', label: t('rqg.c.eqsl_rcvd'),      colId: 'eqsl_rcvd',      headerName: t('rqg.c.eqsl_rcvd'), field: 'eqsl_rcvd' as any,      width: 80 , cellClass: qslStatusCellClass },
   { group: 'eQSL', label: t('rqg.c.eqsl_sent_date'), colId: 'eqsl_sent_date', headerName: t('rqg.h.eqsl_sent_date'), field: 'eqsl_sent_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'eQSL', label: t('rqg.c.eqsl_rcvd_date'), colId: 'eqsl_rcvd_date', headerName: t('rqg.h.eqsl_rcvd_date'), field: 'eqsl_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   // App-specific: when OpsLog e-mailed its own QSL card. Distinct from eQSL.cc.
-  { group: 'QSL', label: t('rqg.c.opslog_qsl_card_sent'), colId: 'opslog_qsl_card_sent', headerName: t('rqg.c.opslog_qsl_card_sent'), width: 100, cellClass: 'font-mono', valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return (e['APP_OPSLOG_QSL_SENT'] || e['APP_OPSLOG_QSL_CARD_SENT']) ? 'Y' : 'N'; }, defaultVisible: true },
+  { group: 'QSL', label: t('rqg.c.opslog_qsl_card_sent'), colId: 'opslog_qsl_card_sent', headerName: t('rqg.c.opslog_qsl_card_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return (e['APP_OPSLOG_QSL_SENT'] || e['APP_OPSLOG_QSL_CARD_SENT']) ? 'Y' : 'N'; }, defaultVisible: true },
   // App-specific: when the QSO's audio recording was e-mailed to the station.
-  { group: 'QSL', label: t('rqg.c.opslog_recording_sent'), colId: 'opslog_recording_sent', headerName: t('rqg.h.opslog_recording_sent'), width: 100, cellClass: 'font-mono', valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_RECORDING_SENT'] ? 'Y' : 'N'; }, defaultVisible: false },
+  { group: 'QSL', label: t('rqg.c.opslog_recording_sent'), colId: 'opslog_recording_sent', headerName: t('rqg.h.opslog_recording_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_RECORDING_SENT'] ? 'Y' : 'N'; }, defaultVisible: false },
 
   // ── Uploads (online logbooks) ──
   // ADIF models these as an "upload status/date" (= YOU pushed the QSO) and,
   // for QRZ only, a "download status/date" (= it came back confirmed). We
   // relabel to the same sent/rcvd wording as LoTW/eQSL. Club Log & HRDLog have
   // NO rcvd field in ADIF — they're upload-only, so only "sent" is shown.
-  { group: 'Uploads', label: t('rqg.c.clublog_sent'),      colId: 'clublog_qso_upload_status', headerName: t('rqg.c.clublog_sent'),   field: 'clublog_qso_upload_status' as any, width: 100 },
+  { group: 'Uploads', label: t('rqg.c.clublog_sent'),      colId: 'clublog_qso_upload_status', headerName: t('rqg.c.clublog_sent'),   field: 'clublog_qso_upload_status' as any, width: 100 , cellClass: qslStatusCellClass },
   { group: 'Uploads', label: t('rqg.c.clublog_sent_date'), colId: 'clublog_qso_upload_date',   headerName: t('rqg.h.clublog_sent_date'), field: 'clublog_qso_upload_date' as any,   width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
-  { group: 'Uploads', label: t('rqg.c.hrdlog_sent'),       colId: 'hrdlog_qso_upload_status',  headerName: t('rqg.c.hrdlog_sent'),    field: 'hrdlog_qso_upload_status' as any,  width: 100 },
+  { group: 'Uploads', label: t('rqg.c.hrdlog_sent'),       colId: 'hrdlog_qso_upload_status',  headerName: t('rqg.c.hrdlog_sent'),    field: 'hrdlog_qso_upload_status' as any,  width: 100 , cellClass: qslStatusCellClass },
   { group: 'Uploads', label: t('rqg.c.hrdlog_sent_date'),  colId: 'hrdlog_qso_upload_date',    headerName: t('rqg.h.hrdlog_sent_date'),  field: 'hrdlog_qso_upload_date' as any,    width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
-  { group: 'Uploads', label: t('rqg.c.qrz_sent'),      colId: 'qrzcom_qso_upload_status',   headerName: t('rqg.c.qrz_sent'),   field: 'qrzcom_qso_upload_status' as any,   width: 100 },
-  { group: 'Uploads', label: t('rqg.c.qrz_rcvd'),      colId: 'qrzcom_qso_download_status', headerName: t('rqg.c.qrz_rcvd'),   field: 'qrzcom_qso_download_status' as any, width: 100 },
+  { group: 'Uploads', label: t('rqg.c.qrz_sent'),      colId: 'qrzcom_qso_upload_status',   headerName: t('rqg.c.qrz_sent'),   field: 'qrzcom_qso_upload_status' as any,   width: 100 , cellClass: qslStatusCellClass },
+  { group: 'Uploads', label: t('rqg.c.qrz_rcvd'),      colId: 'qrzcom_qso_download_status', headerName: t('rqg.c.qrz_rcvd'),   field: 'qrzcom_qso_download_status' as any, width: 100 , cellClass: qslStatusCellClass },
   { group: 'Uploads', label: t('rqg.c.qrz_sent_date'), colId: 'qrzcom_qso_upload_date',     headerName: t('rqg.h.qrz_sent_date'), field: 'qrzcom_qso_upload_date' as any,     width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'Uploads', label: t('rqg.c.qrz_rcvd_date'), colId: 'qrzcom_qso_download_date',   headerName: t('rqg.h.qrz_rcvd_date'), field: 'qrzcom_qso_download_date' as any,   width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
 
@@ -303,7 +295,11 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
   const [dispCount, setDispCount] = useState(0); // rows currently displayed (post column filters) — drives Select all ↔ Unselect all
 
   // Localized column catalog — rebuilt when the language changes.
-  const COL_CATALOG = useMemo(() => makeColCatalog(t, myGrid), [t, myGrid]);
+  // Rebuild the columns when the format changes: the formatters are captured
+  // inside the column definitions, so nothing else would notice.
+  const [dateFmt, setDateFmt] = useState(getDateFormat);
+  useEffect(() => subscribeDateFormat(() => setDateFmt(getDateFormat())), []);
+  const COL_CATALOG = useMemo(() => makeColCatalog(t, myGrid), [t, myGrid, dateFmt]);
 
   // Right-click: if the clicked row isn't already part of the selection,
   // select just it; then open the bulk-action menu on the whole selection.

frontend/src/components/SettingsModal.tsx

@@ -16,7 +16,7 @@ import {
   GetTunerGeniusSettings, SaveTunerGeniusSettings,
   GetAmplifiers, SaveAmplifiers, GetAmpStatuses, AmpOperate,
   GetWinkeyerSettings, SaveWinkeyerSettings, ListSerialPorts,
-  GetAudioSettings, SaveAudioSettings, ListAudioInputDevices, ListAudioOutputDevices, PickAudioFolder, TestPTT,
+  GetAudioSettings, SaveAudioSettings, AudioApplyLevels, ListAudioInputDevices, ListAudioOutputDevices, PickAudioFolder, TestPTT,
   GetClublogCtyInfo, SetClublogCtyEnabled, DownloadClublogCty,
   GetClublogMostWantedInfo, SetClublogMostWantedEnabled, DownloadClublogMostWanted,
   GetSecretStatus, SetPassphrase, RemovePassphrase,
@@ -37,6 +37,8 @@ import {
   GetQSLDefaults, SaveQSLDefaults,
   SetWinkeyerTrace,
   SetCIVTrace,
+  CIVTraceEnabled,
+  WinkeyerTraceEnabled,
   GetExternalServices, SaveExternalServices, TestQRZUpload, TestClublogUpload, TestHRDLogUpload, TestEQSLUpload, TestCloudlogUpload,
   GetPOTAToken, SavePOTAToken,
   TestLoTWUpload, ListTQSLStationLocations,
@@ -45,7 +47,7 @@ import {
   DownloadULSCounties, ULSStatus, BackfillUSCounties,
   ComputeStationInfo,
   GetUIPref, SetUIPref,
-  GetFlexState, GetFlexBandAntennas, SaveFlexBandAntennas,
+  GetFlexState, GetFlexBandAntennas, SaveFlexBandAntennas, GetFlexBandPower, SaveFlexBandPower,
   GetADIFMonitor, SaveADIFMonitor, PickADIFMonitorFile,
   GetRelayAuto, SaveRelayAuto, GetStationDevices,
 } from '../../wailsjs/go/main/App';
@@ -67,6 +69,7 @@ import {
 } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
 import { writeUiPref } from '@/lib/uiPref';
+import { getDateFormat, setDateFormat, type DateFormat } from '@/lib/dateFormat';
 import { useI18n, FlagGB, FlagFR, type Lang } from '@/lib/i18n';
 import { useTheme, CONCRETE_THEMES, type ThemeChoice } from '@/lib/theme';
 import { OperatingPanel } from '@/components/OperatingPanel';
@@ -950,81 +953,121 @@ function ComingSoon({ id, icon: Icon }: { id: SectionId; icon?: any }) {
   );
 }
 
-// FlexBandAntennasPanel — pick the RX/TX antenna per band. Applied automatically
-// when the band changes (frequency change / spot click). Antennas come live from
-// the connected FlexRadio; bands come from Lists → Bands.
-function FlexBandAntennasPanel({ bands }: { bands: string[] }) {
+// FlexBandPanel — everything that follows the band, in ONE row per band:
+// antennas and TX power.
+//
+// They were two tables listing the same bands one under the other, which made
+// the operator match rows by eye between them. The two settings are stored and
+// applied separately (antennas on band change, power on band or mode change) —
+// that is a backend detail, and no reason to split what is one decision per
+// band for the person configuring it.
+function FlexBandPanel({ bands }: { bands: string[] }) {
+  const { t } = useI18n();
   const [rxList, setRxList] = useState<string[]>([]);
   const [txList, setTxList] = useState<string[]>([]);
-  const [map, setMap] = useState<Record<string, { rx: string; tx: string }>>({});
+  const [ant, setAnt] = useState<Record<string, { rx: string; tx: string }>>({});
+  const [pwr, setPwr] = useState<Record<string, { phone: number; cw: number; digi: number }>>({});
   const [msg, setMsg] = useState('');
+
   useEffect(() => {
     GetFlexState().then((s: any) => {
       setRxList((s?.ant_list ?? []) as string[]);
       setTxList(((s?.tx_ant_list?.length ? s.tx_ant_list : s?.ant_list) ?? []) as string[]);
     }).catch(() => {});
-    GetFlexBandAntennas().then((m: any) => setMap(m ?? {})).catch(() => {});
+    GetFlexBandAntennas().then((m: any) => setAnt(m ?? {})).catch(() => {});
+    GetFlexBandPower().then((m: any) => setPwr(m ?? {})).catch(() => {});
   }, []);
-  const set = (band: string, side: 'rx' | 'tx', v: string) => {
+
+  const saved = () => { setMsg(t('flxpw.saved')); window.setTimeout(() => setMsg(''), 1200); };
+
+  const setAntenna = (band: string, side: 'rx' | 'tx', v: string) => {
     const key = band.toUpperCase();
-    setMap((m) => {
-      const cur = m[key] ?? { rx: '', tx: '' };
-      const next = { ...m, [key]: { ...cur, [side]: v } };
-      SaveFlexBandAntennas(next as any)
-        .then(() => { setMsg('Saved'); window.setTimeout(() => setMsg(''), 1200); })
-        .catch((e: any) => setMsg(String(e?.message ?? e)));
+    setAnt((m) => {
+      const next = { ...m, [key]: { ...(m[key] ?? { rx: '', tx: '' }), [side]: v } };
+      SaveFlexBandAntennas(next as any).then(saved).catch((e: any) => setMsg(String(e?.message ?? e)));
       return next;
     });
   };
+
+  const setPower = (band: string, kind: 'phone' | 'cw' | 'digi', v: string) => {
+    const key = band.toUpperCase();
+    const n = Math.max(0, Math.min(100, parseInt(v, 10) || 0));
+    setPwr((m) => {
+      const next = { ...m, [key]: { ...(m[key] ?? { phone: 0, cw: 0, digi: 0 }), [kind]: n } };
+      SaveFlexBandPower(next as any).then(saved).catch((e: any) => setMsg(String(e?.message ?? e)));
+      return next;
+    });
+  };
+
+  const antCell = (b: string, side: 'rx' | 'tx', list: string[]) => {
+    const e = ant[b.toUpperCase()] ?? { rx: '', tx: '' };
+    return (
+      <td className="px-2 py-1.5">
+        <select value={e[side] ?? ''} onChange={(ev) => setAntenna(b, side, ev.target.value)}
+          className="h-8 w-28 rounded-md border border-input bg-background px-1.5 text-xs font-mono">
+          <option value="">— none —</option>
+          {list.map((a) => <option key={a} value={a}>{a}</option>)}
+        </select>
+      </td>
+    );
+  };
+
+  // The rule marking where band-driven settings end and mode-driven ones begin
+  // is drawn on the FIRST power cell, header and body alike. It used to be an
+  // extra empty cell in the body only, which gave the two rows different column
+  // counts and slid every heading one column left.
+  const pwrCell = (b: string, kind: 'phone' | 'cw' | 'digi') => {
+    const e = pwr[b.toUpperCase()] ?? { phone: 0, cw: 0, digi: 0 };
+    return (
+      <td className={cn('px-2 py-1.5', kind === 'phone' && 'border-l border-border/60')}>
+        <Input
+          type="number" min={0} max={100}
+          className="h-8 w-16 text-xs"
+          value={e[kind] ? String(e[kind]) : ''}
+          placeholder="—"
+          onChange={(ev) => setPower(b, kind, ev.target.value)}
+        />
+      </td>
+    );
+  };
+
   return (
     <div className="space-y-3">
       <div>
-        <h3 className="text-base font-semibold text-foreground">FlexRadio — per-band antennas</h3>
-        <p className="text-xs text-muted-foreground">
-          Choose the RX and TX antenna for each band. They're applied automatically when the band
-          changes (frequency change or clicking a spot).
-        </p>
+        <h3 className="text-base font-semibold text-foreground">{t('flxb.title')}</h3>
+        <p className="text-xs text-muted-foreground">{t('flxb.hint')}</p>
       </div>
       {rxList.length === 0 && (
-        <div className="text-xs text-warning-muted-foreground bg-warning-muted border border-warning-border rounded-md px-3 py-2 max-w-xl">
-          No antennas reported yet — make sure the FlexRadio is connected (CAT interface), then reopen this panel.
+        <div className="text-xs text-warning-muted-foreground bg-warning-muted border border-warning-border rounded-md px-3 py-2 max-w-2xl">
+          {t('flxb.noRadio')}
         </div>
       )}
       {bands.length === 0 ? (
-        <p className="text-xs text-muted-foreground">No bands configured — add them in Lists → Bands.</p>
+        <p className="text-xs text-muted-foreground">{t('flxpw.noBands')}</p>
       ) : (
-        <div className="rounded-md border border-border overflow-hidden max-w-xl">
+        <div className="rounded-md border border-border overflow-x-auto max-w-3xl">
           <table className="w-full text-sm">
             <thead className="bg-muted/40 text-muted-foreground text-xs">
               <tr>
-                <th className="text-left px-3 py-1.5 font-semibold">Band</th>
-                <th className="text-left px-3 py-1.5 font-semibold">RX antenna</th>
-                <th className="text-left px-3 py-1.5 font-semibold">TX antenna</th>
+                <th className="text-left px-3 py-1.5 font-semibold">{t('flxpw.band')}</th>
+                <th className="text-left px-2 py-1.5 font-semibold">{t('flxb.rxAnt')}</th>
+                <th className="text-left px-2 py-1.5 font-semibold">{t('flxb.txAnt')}</th>
+                <th className="text-left px-2 py-1.5 font-semibold border-l border-border/60">{t('flxpw.phone')}</th>
+                <th className="text-left px-2 py-1.5 font-semibold">CW</th>
+                <th className="text-left px-2 py-1.5 font-semibold">{t('flxpw.digi')}</th>
               </tr>
             </thead>
             <tbody>
-              {bands.map((b) => {
-                const e = map[b.toUpperCase()] ?? { rx: '', tx: '' };
-                return (
+              {bands.map((b) => (
                 <tr key={b} className="border-t border-border/50">
                   <td className="px-3 py-1.5 font-mono font-semibold">{b}</td>
-                    <td className="px-3 py-1.5">
-                      <select value={e.rx ?? ''} onChange={(ev) => set(b, 'rx', ev.target.value)}
-                        className="h-8 w-32 rounded-md border border-input bg-background px-1.5 text-xs font-mono">
-                        <option value="">— none —</option>
-                        {rxList.map((a) => <option key={a} value={a}>{a}</option>)}
-                      </select>
-                    </td>
-                    <td className="px-3 py-1.5">
-                      <select value={e.tx ?? ''} onChange={(ev) => set(b, 'tx', ev.target.value)}
-                        className="h-8 w-32 rounded-md border border-input bg-background px-1.5 text-xs font-mono">
-                        <option value="">— none —</option>
-                        {txList.map((a) => <option key={a} value={a}>{a}</option>)}
-                      </select>
-                    </td>
+                  {antCell(b, 'rx', rxList)}
+                  {antCell(b, 'tx', txList)}
+                  {pwrCell(b, 'phone')}
+                  {pwrCell(b, 'cw')}
+                  {pwrCell(b, 'digi')}
                 </tr>
-                );
-              })}
+              ))}
             </tbody>
           </table>
         </div>
@@ -1093,7 +1136,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   const [modeDraft, setModeDraft] = useState('');
   const [catCfg, setCatCfg] = useState<CATSettings>({
     enabled: false, backend: 'omnirig', omnirig_rig: 1, omnirig_vfo: '', flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120,
-    yaesu_port: '', yaesu_baud: 38400, kenwood_port: '', kenwood_baud: 9600, xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70,
+    yaesu_port: '', yaesu_baud: 38400, yaesu_low_lines: false, kenwood_low_lines: false, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '',
     icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0,
     digital_default: 'FT8', share_enabled: false, share_port: 4532,
@@ -1136,8 +1179,18 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   });
   const [wkPorts, setWkPorts] = useState<string[]>([]);
   // Session-only: the byte trace is a diagnostic, never a saved preference.
+  //
+  // But it must still SHOW its real state. These start false on every mount, so
+  // a trace already running came back unticked; the operator ticks the box to
+  // turn it on, which turns it off, and the log they send has no trace in it.
+  // Reported by a Xiegu user. Hydrated from the backend below.
+  const [dateFmtSel, setDateFmtSel] = useState<DateFormat>(getDateFormat);
   const [wkTrace, setWkTrace] = useState(false);
   const [civTrace, setCivTrace] = useState(false);
+  useEffect(() => {
+    CIVTraceEnabled().then((v) => setCivTrace(!!v)).catch(() => {});
+    WinkeyerTraceEnabled().then((v) => setWkTrace(!!v)).catch(() => {});
+  }, []);
   const setWkField = (patch: Partial<WKSettings>) => setWk((s) => ({ ...s, ...patch }));
 
   // ── Audio (DVK + QSO recorder) ──
@@ -1145,13 +1198,13 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     from_radio: string; to_radio: string; recording_device: string; listening_device: string;
     qso_record: boolean; qso_dir: string; preroll_seconds: number;
     ptt_method: 'none' | 'cat' | 'rts' | 'dtr'; ptt_port: string; format: 'wav' | 'mp3';
-    from_gain: number; mic_gain: number; tx_gain: number;
+    from_gain: number; mic_gain: number; tx_gain: number; qso_play_gain: number;
   };
   type AudioDev = { id: string; name: string; default: boolean };
   const [audioCfg, setAudioCfg] = useState<AudioSettings>({
     from_radio: '', to_radio: '', recording_device: '', listening_device: '',
     qso_record: false, qso_dir: '', preroll_seconds: 8, ptt_method: 'none', ptt_port: '', format: 'wav',
-    from_gain: 100, mic_gain: 100, tx_gain: 100,
+    from_gain: 100, mic_gain: 100, tx_gain: 100, qso_play_gain: 100,
   });
   const [audioInputs, setAudioInputs] = useState<AudioDev[]>([]);
   const [audioOutputs, setAudioOutputs] = useState<AudioDev[]>([]);
@@ -1276,7 +1329,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     upload_flags: string[]; write_log: boolean;
     auto_upload: boolean; upload_mode: string;
   };
-  type ExternalServices = { qrz: ExtServiceCfg; clublog: ExtServiceCfg; lotw: ExtServiceCfg; hrdlog: ExtServiceCfg; eqsl: ExtServiceCfg; cloudlog: ExtServiceCfg };
+  type ExternalServices = { qrz: ExtServiceCfg; clublog: ExtServiceCfg; lotw: ExtServiceCfg; hrdlog: ExtServiceCfg; eqsl: ExtServiceCfg; cloudlog: ExtServiceCfg; delete_remote?: boolean };
   const emptyExtCfg = (): ExtServiceCfg => ({
     api_key: '', url: '', station_id: '', email: '', username: '', password: '', callsign: '', code: '', qth_nickname: '',
     force_station_callsign: '', tqsl_path: '', station_location: '', key_password: '',
@@ -1284,7 +1337,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     auto_upload: false, upload_mode: 'immediate',
   });
   const [extSvc, setExtSvc] = useState<ExternalServices>({
-    qrz: emptyExtCfg(), clublog: emptyExtCfg(), lotw: emptyExtCfg(), hrdlog: emptyExtCfg(), eqsl: emptyExtCfg(), cloudlog: emptyExtCfg(),
+    qrz: emptyExtCfg(), clublog: emptyExtCfg(), lotw: emptyExtCfg(), hrdlog: emptyExtCfg(), eqsl: emptyExtCfg(), cloudlog: emptyExtCfg(), delete_remote: false,
   });
   const [qrzTest, setQrzTest] = useState<{ ok: boolean; msg: string } | null>(null);
   const [qrzTesting, setQrzTesting] = useState(false);
@@ -2485,6 +2538,19 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                   }} />
                 <span className="text-xs text-muted-foreground">{t('cat.xieguAddrHint')}</span>
               </div>
+              <div className="space-y-1">
+                <Label>{t('cat.xieguPTTLine')}</Label>
+                <Select value={catCfg.xiegu_ptt_line || 'civ'}
+                  onValueChange={(v) => setCatCfg((s) => ({ ...s, xiegu_ptt_line: v === 'civ' ? '' : v }))}>
+                  <SelectTrigger><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    <SelectItem value="civ">{t('cat.xieguPTTCiv')}</SelectItem>
+                    <SelectItem value="rts">RTS</SelectItem>
+                    <SelectItem value="dtr">DTR</SelectItem>
+                  </SelectContent>
+                </Select>
+                <span className="text-xs text-muted-foreground">{t('cat.xieguPTTHint')}</span>
+              </div>
             </>
             )}
             {catCfg.backend === 'yaesu' && (
@@ -2514,9 +2580,16 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                 </Select>
                 <span className="text-xs text-muted-foreground">{t('cat.yaesuBaudHint')}</span>
               </div>
+              <div className="space-y-1">
+                <label className="flex items-center gap-2 text-xs cursor-pointer">
+                  <Checkbox checked={!!catCfg.yaesu_low_lines} onCheckedChange={(c) => setCatCfg((s) => ({ ...s, yaesu_low_lines: !!c }))} />
+                  {t('cat.lowerLines')}
+                </label>
+                <span className="text-xs text-muted-foreground">{t('cat.lowerLinesHint')}</span>
+              </div>
             </>
             )}
-            {(catCfg.backend === 'icom' || catCfg.backend === 'xiegu') && (
+            {['icom', 'xiegu', 'kenwood'].includes(catCfg.backend) && (
               <div className="border-t border-border/60 pt-3">
                 <label className="flex items-center gap-2 text-sm cursor-pointer">
                   <Checkbox checked={civTrace} onCheckedChange={(c) => { setCivTrace(!!c); SetCIVTrace(!!c); }} />
@@ -2552,6 +2625,22 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                 </Select>
                 <span className="text-xs text-muted-foreground">{t('cat.kenwoodBaudHint')}</span>
               </div>
+              <div className="space-y-1">
+                <Label>{t('cat.kenwoodHost')}</Label>
+                <Input
+                  value={catCfg.kenwood_host || ''}
+                  placeholder="192.168.1.50:4532"
+                  onChange={(e) => setCatCfg((s) => ({ ...s, kenwood_host: e.target.value }))}
+                />
+                <span className="text-xs text-muted-foreground">{t('cat.kenwoodHostHint')}</span>
+              </div>
+              <div className="space-y-1">
+                <label className="flex items-center gap-2 text-xs cursor-pointer">
+                  <Checkbox checked={!!catCfg.kenwood_low_lines} onCheckedChange={(c) => setCatCfg((s) => ({ ...s, kenwood_low_lines: !!c }))} />
+                  {t('cat.lowerLines')}
+                </label>
+                <span className="text-xs text-muted-foreground">{t('cat.lowerLinesHint')}</span>
+              </div>
             </>
             )}
             {catCfg.backend === 'icom' && (
@@ -4203,6 +4292,21 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
 
         <ProfileScopeNote profile={activeProfileObj} />
 
+        {/* Applies to BOTH services, so it sits above the tab strip rather than
+            inside one tab where it would look like a QRZ-only setting (and be
+            invisible to anyone who only opens the Club Log tab). */}
+        <label className="flex items-start gap-2 text-sm cursor-pointer mb-4 max-w-2xl">
+          <Checkbox
+            checked={!!extSvc.delete_remote}
+            onCheckedChange={(c) => setExtSvc((v) => ({ ...v, delete_remote: !!c }))}
+            className="mt-0.5"
+          />
+          <span>
+            {t('es.deleteRemote')}
+            <span className="block text-xs text-muted-foreground mt-0.5">{t('es.deleteRemoteHint')}</span>
+          </span>
+        </label>
+
         {/* Tab strip */}
         <div className="flex flex-wrap gap-1 border-b border-border mb-4">
           {TABS.map((tab) => (
@@ -5038,13 +5142,19 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
             <Label className="text-sm">{t('aud.fromLevel')}</Label>
             <div className="flex items-center gap-2">
               <input type="range" min={10} max={300} step={5} value={audioCfg.from_gain}
-                onChange={(e) => setAudioField({ from_gain: parseInt(e.target.value, 10) })} className="w-48 accent-primary" />
+                onChange={(e) => { const v = parseInt(e.target.value, 10); setAudioField({ from_gain: v }); AudioApplyLevels(v, audioCfg.mic_gain); }} className="w-48 accent-primary" />
               <span className="font-mono text-xs w-12 text-right">{audioCfg.from_gain}%</span>
             </div>
+            <Label className="text-sm">{t('aud.qsoPlayLevel')}</Label>
+            <div className="flex items-center gap-2">
+              <input type="range" min={10} max={300} step={5} value={audioCfg.qso_play_gain}
+                onChange={(e) => setAudioField({ qso_play_gain: parseInt(e.target.value, 10) })} className="w-48 accent-primary" />
+              <span className="font-mono text-xs w-12 text-right">{audioCfg.qso_play_gain}%</span>
+            </div>
             <Label className="text-sm">{t('aud.micLevel')}</Label>
             <div className="flex items-center gap-2">
               <input type="range" min={10} max={300} step={5} value={audioCfg.mic_gain}
-                onChange={(e) => setAudioField({ mic_gain: parseInt(e.target.value, 10) })} className="w-48 accent-primary" />
+                onChange={(e) => { const v = parseInt(e.target.value, 10); setAudioField({ mic_gain: v }); AudioApplyLevels(audioCfg.from_gain, v); }} className="w-48 accent-primary" />
               <span className="font-mono text-xs w-12 text-right">{audioCfg.mic_gain}%</span>
             </div>
           </div>
@@ -5187,6 +5297,27 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
             </div>
           </div>
 
+          {/* Display only. The log is stored in ISO/ADIF whatever is chosen here
+              — that is what ADIF specifies and what sorts correctly, and a
+              stored format that followed a preference would make the log
+              unreadable the day the preference changed. */}
+          <div className="flex items-center gap-3">
+            <Label className="text-sm w-40">{t('gen.dateFormat')}</Label>
+            <div className="inline-flex rounded-md border border-border overflow-hidden">
+              {([['iso', t('gen.dateStandard'), '2026-07-30 14:25'],
+                 ['fr', t('gen.dateFR'), '30-07-2026 14:25'],
+                 ['us', t('gen.dateUS'), '07-30-2026 14:25']] as [DateFormat, string, string][]).map(([code, label, sample]) => (
+                <button key={code} type="button" title={sample}
+                  onClick={() => { setDateFormat(code); setDateFmtSel(code); }}
+                  className={cn('flex flex-col items-start px-3 py-1 text-sm font-medium border-l border-border first:border-l-0',
+                    dateFmtSel === code ? 'bg-primary text-primary-foreground' : 'bg-card text-muted-foreground hover:bg-muted')}>
+                  {label}
+                  <span className="text-[10px] font-mono opacity-70">{sample}</span>
+                </button>
+              ))}
+            </div>
+          </div>
+
           <ThemeSelector />
 
           <label className="flex items-center gap-2 text-sm cursor-pointer">
@@ -5533,7 +5664,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
     antgenius:      AntGeniusPanelSettings,
     tunergenius:    TunerGeniusPanelSettings,
     pgxl:           PGXLPanelSettings,
-    flex:           () => <FlexBandAntennasPanel bands={lists.bands ?? []} />,
+    flex:           () => <FlexBandPanel bands={lists.bands ?? []} />,
     audio:          AudioPanel,
   };
 

frontend/src/components/StationControlPanel.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useRef, useState } from 'react';
+import { useCallback, useEffect, useLayoutEffect, useRef, useState } from 'react';
 import { Plus, Pencil, Trash2, Power, PlugZap, Loader2, Check, X, Compass, Square, Antenna as AntennaIcon, ArrowDownToLine, Minus, RefreshCw, GripVertical } from 'lucide-react';
 import { Button } from '@/components/ui/button';
 import { Input } from '@/components/ui/input';
@@ -26,6 +26,13 @@ type Device = { id: string; type: string; name: string; host: string; user?: str
 type Relay = { number: number; label: string; on: boolean };
 type DevStatus = { id: string; name: string; type: string; connected: boolean; error?: string; relays: Relay[] };
 
+// Dashboard geometry: a grid of EQUAL columns whose cards also share a common
+// HEIGHT per row — every card stretches to the tallest one beside it. Masonry
+// packed tighter but left the row edges ragged, which read as untidy on a wide
+// screen; aligned rows are what an operator expects from a dashboard.
+const CARD_MIN = 430; // narrowest a card may get before "Auto" drops a column
+const GRID_GAP = 16; // px between cards, both axes
+
 const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8 };
 const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)' };
 
@@ -269,6 +276,23 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   // Max columns per row (persisted). "Auto" fills the window; a number caps the
   // row so cards wrap onto further lines even when there's horizontal room.
   const [cols, setCols] = useState<string>(() => localStorage.getItem('opslog.stationCols') || 'auto');
+
+  // How many columns the dashboard shows. "Auto" fits as many CARD_MIN-wide
+  // cards as the window allows; an explicit count is honoured as asked, even
+  // past that width — the operator can see his own screen.
+  const gridRef = useRef<HTMLDivElement | null>(null);
+  const [colCount, setColCount] = useState(1);
+
+  useLayoutEffect(() => {
+    if (cols !== 'auto') { setColCount(Number(cols) || 1); return; }
+    const el = gridRef.current;
+    if (!el) return;
+    const measure = () => setColCount(Math.max(1, Math.floor((el.clientWidth + GRID_GAP) / (CARD_MIN + GRID_GAP))));
+    measure();
+    const ro = new ResizeObserver(measure);
+    ro.observe(el);
+    return () => ro.disconnect();
+  }, [cols]);
   // Amplifiers (Settings → Amplifier): shown here so operators without a
   // FlexRadio panel still get the controls. EVERY configured amp gets its own
   // card (identical to the Flex panel's) — no dropdown. Polled fast (1.5s) so the
@@ -415,10 +439,10 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
     );
   };
 
-  // `wide` cards span the whole dashboard instead of sitting in one masonry
-  // column. The amplifier and tuner carry meter rows and a channel selector that
-  // are unreadable squeezed into a ~430px column — they are the same cards the
-  // FlexRadio panel shows full-width, and they need that room here too.
+  // `wide` cards take two grid columns instead of one. The amplifier and tuner
+  // carry meter rows and a channel selector that are unreadable squeezed into a
+  // single ~430px column — they are the same cards the FlexRadio panel shows
+  // full-width, and they need that room here too.
   const widgets: { id: string; node: React.ReactNode; wide?: boolean }[] = [];
   if (rot.enabled) {
     widgets.push({ id: 'rotator', node: <RotatorWidget hd={rot} refetch={pollRot} centerLat={centerLat} centerLon={centerLon} bearing={bearing} t={t} /> });
@@ -446,7 +470,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
           {/* Max columns per row: Auto fills the window; 1/2/3/4 cap the row so a
               card can sit on a further line even with horizontal room to spare. */}
           <div className="flex items-center rounded-md border border-border overflow-hidden text-[11px]">
-            {(['auto', '1', '2', '3', '4'] as const).map((c) => (
+            {(['auto', '1', '2', '3', '4', '5', '6'] as const).map((c) => (
               <button key={c} type="button"
                 onClick={() => { setCols(c); writeUiPref('opslog.stationCols', c); }}
                 className={cn('px-2 py-1 font-medium', cols === c ? 'bg-primary text-primary-foreground' : 'text-muted-foreground hover:bg-muted')}>
@@ -466,22 +490,26 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
         </div>
       )}
 
-      {/* Masonry dashboard: fixed-width cards flow into balanced CSS columns so
-          they pack tightly by height (no ragged gaps under short cards). "Auto"
-          fits as many ~430px columns as the window allows; a fixed count caps the
-          container width to that many columns. Each card has a grip handle (left
-          rail) as the drag initiator (the body is full of buttons). */}
-      <div style={{ columnWidth: '430px', columnGap: '1rem', columnFill: 'balance',
-        ...(cols !== 'auto' ? { maxWidth: `${Number(cols) * 446}px` } : {}) }}>
+      {/* Dashboard grid: equal columns, and every card stretches to the height of
+          the tallest one on its row, so the rows line up instead of ending
+          ragged. One column each, two for the amplifier/tuner whose meter rows
+          need the room. Each card has a grip handle (left rail) as the drag
+          initiator, since the body is full of buttons. */}
+      <div ref={gridRef} style={{
+        display: 'grid',
+        gridTemplateColumns: `repeat(${colCount}, minmax(0, 1fr))`,
+        gap: `${GRID_GAP}px`,
+      }}>
         {ordered.map((w) => (
-          // column-span:all lifts a wide card out of the columns and across the
-          // full container, while keeping it in document order — so drag-reorder
-          // still works between wide and normal cards. Capped so it stays a card
-          // and not a banner on an ultra-wide window.
-          <div key={w.id} className="flex items-stretch break-inside-avoid mb-4"
-            style={w.wide ? { columnSpan: 'all', maxWidth: '900px' } : undefined}
+          <div key={w.id}
+            // A wide card takes two columns — but never more than there are, or
+            // the grid would grow a phantom column on a narrow window.
+            style={{ gridColumn: w.wide ? `span ${Math.min(2, colCount)}` : undefined }}
             onDragOver={(e) => { if (dragId.current) { e.preventDefault(); e.dataTransfer.dropEffect = 'move'; } }}
             onDrop={(e) => { if (dragId.current) { e.preventDefault(); onDrop(w.id); } }}>
+            {/* h-full down the chain is what makes the card fill the row height
+                rather than sit at its natural size in a taller cell. */}
+            <div className="flex items-stretch h-full">
               <div draggable
                 onDragStart={(e) => { dragId.current = w.id; e.dataTransfer.effectAllowed = 'move'; }}
                 onDragEnd={() => { dragId.current = null; }}
@@ -490,7 +518,8 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
                   dragId.current === w.id && 'opacity-60')}>
                 <GripVertical className="size-4" />
               </div>
-            <div className="flex-1 min-w-0">{w.node}</div>
+              <div className="flex-1 min-w-0 [&>*]:h-full">{w.node}</div>
+            </div>
           </div>
         ))}
       </div>

frontend/src/components/TunerCard.tsx

@@ -76,13 +76,16 @@ export function TunerCard({ status, t }: { status: TGStatus; t: (k: string, v?:
   const peakHold = (key: string, val: number) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > 1000) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
   const connected = !!status.connected;
   const rawVswr = status.vswr && status.vswr > 0 ? status.vswr : undefined;
-  const rawFwdW = status.fwd_w && status.fwd_w >= 1 ? status.fwd_w : 0;
+  // Prefer the device's own peak detector over the sampled reading; the JS hold
+  // below still smooths what is left between polls.
+  const rawPeak = Math.max(status.peak_w ?? 0, status.fwd_w ?? 0);
+  const rawFwdW = rawPeak >= 1 ? rawPeak : 0;
   const fwdW = peakHold('fwd', rawFwdW);
 
   // SWR needs RF to mean anything: sampled on receive the device reports a
@@ -93,13 +96,14 @@ export function TunerCard({ status, t }: { status: TGStatus; t: (k: string, v?:
   // That expiry is the point: the first version of this held the last TX value
   // with no timeout at all, so the meter sat frozen on the previous transmission
   // indefinitely — reading 1.39:1 with the radio plainly in RX and 0 W forward.
-  // Same 2 s window as the power peak above, so the two meters clear together.
+  // Same one-second window as the power peak above, so the two meters clear
+  // together.
   const swrHold = useRef<{ v: number; t: number } | null>(null);
   if (rawFwdW >= 1 && rawVswr) swrHold.current = { v: rawVswr, t: Date.now() };
   const heldSwr = swrHold.current;
   const vswr = rawFwdW >= 1
     ? rawVswr
-    : heldSwr && Date.now() - heldSwr.t < 2000
+    : heldSwr && Date.now() - heldSwr.t < 1000
       ? heldSwr.v
       : undefined;
   const active = status.active ?? 1;

frontend/src/components/TunerGeniusPanel.tsx

@@ -8,7 +8,7 @@ export type TGChannel = {
 };
 export type TGStatus = {
   connected: boolean; host?: string; last_error?: string;
-  fwd_dbm?: number; fwd_w?: number; swr_db?: number; vswr?: number; freq_mhz?: number;
+  fwd_dbm?: number; fwd_w?: number; peak_w?: number; swr_db?: number; vswr?: number; freq_mhz?: number;
   operate?: boolean; bypass?: boolean; tuning?: boolean; active?: number;
   antenna?: number; three_way?: boolean; message?: string;
   a?: TGChannel; b?: TGChannel;
@@ -69,6 +69,10 @@ export function TunerGeniusPanel({ status, onTune, onBypass, onOperate, onActiva
   const { t } = useI18n();
   const vswr = status.vswr && status.vswr > 0 ? status.vswr : undefined;
   const active = status.active ?? 1;
+  // The device's own peak, not the instantaneous reading: a 400 ms poll lands
+  // between syllables as often as on a peak, so the plain figure showed a few
+  // hundred watts on a kilowatt transmission.
+  const fwdW = Math.max(status.peak_w ?? 0, status.fwd_w ?? 0);
 
   return (
     <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
@@ -103,7 +107,7 @@ export function TunerGeniusPanel({ status, onTune, onBypass, onOperate, onActiva
             <div className="rounded-lg border border-border bg-card/70 px-2 py-1.5 text-center">
               <div className="text-[9px] uppercase tracking-wider text-muted-foreground">{t('tgp.power')}</div>
               <div className="text-lg font-bold font-mono leading-tight text-foreground/80">
-                {status.fwd_w && status.fwd_w >= 1 ? `${Math.round(status.fwd_w)} W` : '—'}
+                {fwdW >= 1 ? `${Math.round(fwdW)} W` : '—'}
               </div>
             </div>
           </div>

frontend/src/components/WorkedBeforeGrid.tsx

@@ -14,6 +14,7 @@ import { Checkbox } from '@/components/ui/checkbox';
 import { Badge } from '@/components/ui/badge';
 import type { WorkedBeforeView, QSOForm } from '@/types';
 import { makeColCatalog, GROUP_ORDER, groupLabel } from './RecentQSOsGrid';
+import { getDateFormat, subscribeDateFormat } from '@/lib/dateFormat';
 import { QSOContextMenu, type QSOMenuState } from './QSOContextMenu';
 import { loadLocal, loadRemote, saveState, seedLocal, whenGridPrefsReady } from '@/lib/gridPrefs';
 import { useI18n } from '@/lib/i18n';
@@ -63,7 +64,9 @@ export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleCli
   const [menu, setMenu] = useState<QSOMenuState>(null);
 
   // Localized column catalog (shared with the Recent QSOs grid).
-  const COL_CATALOG = useMemo(() => makeColCatalog(t, myGrid), [t, myGrid]);
+  const [dateFmt, setDateFmt] = useState(getDateFormat);
+  useEffect(() => subscribeDateFormat(() => setDateFmt(getDateFormat())), []);
+  const COL_CATALOG = useMemo(() => makeColCatalog(t, myGrid), [t, myGrid, dateFmt]);
 
   function handleRowDoubleClicked(e: RowDoubleClickedEvent<WorkedEntry>) {
     if (e.data && onRowDoubleClicked) onRowDoubleClicked(e.data);

frontend/src/components/ui/tabs.tsx

@@ -37,7 +37,11 @@ const TabsContent = React.forwardRef<
 >(({ className, ...props }, ref) => (
   <TabsPrimitive.Content
     ref={ref}
-    className={cn('mt-2 ring-offset-background focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring focus-visible:ring-offset-2', className)}
+    // No focus ring on the panel itself. Radix makes the content focusable and
+    // moves focus into it when a tab is selected, so clicking anywhere in the
+    // lower half drew a full-width orange rule under the tab strip. The panel is
+    // a container — what it holds carries its own focus styling.
+    className={cn('mt-2 focus-visible:outline-none', className)}
     {...props}
   />
 ));

frontend/src/lib/dateFormat.ts

@@ -0,0 +1,91 @@
+// How dates are DISPLAYED. Nothing here touches what is stored.
+//
+// The log keeps ADIF/ISO throughout — the database, ADIF export, LoTW, every
+// upload. This is the reading layer only, because an operator reading
+// "2026-07-30" as the 7th of the 30th month is reading their own log wrongly,
+// and that is a display problem, not a data one.
+//
+// Storage stays ISO deliberately and permanently: it sorts correctly as text,
+// it is what ADIF specifies, and a log whose stored format followed a UI
+// preference would become unreadable the day the preference changed.
+import { writeUiPref } from '@/lib/uiPref';
+
+export type DateFormat = 'iso' | 'fr' | 'us';
+
+const KEY = 'opslog.dateFormat';
+
+function read(): DateFormat {
+	const v = localStorage.getItem(KEY);
+	return v === 'fr' || v === 'us' ? v : 'iso';
+}
+
+let current: DateFormat = read();
+
+// A minimal store so every grid and panel re-renders the moment the format
+// changes, rather than showing the old one until the next restart.
+const listeners = new Set<() => void>();
+
+export function getDateFormat(): DateFormat {
+	return current;
+}
+
+export function setDateFormat(f: DateFormat): void {
+	current = f;
+	writeUiPref(KEY, f);
+	listeners.forEach((l) => l());
+}
+
+export function subscribeDateFormat(fn: () => void): () => void {
+	listeners.add(fn);
+	return () => listeners.delete(fn);
+}
+
+// reloadDateFormat re-reads the stored value — for after the portable prefs
+// have been synced from the database at startup, which happens AFTER this
+// module's first read.
+export function reloadDateFormat(): void {
+	const v = read();
+	if (v !== current) {
+		current = v;
+		listeners.forEach((l) => l());
+	}
+}
+
+const pad = (n: number) => String(n).padStart(2, '0');
+
+// order arranges the three parts. Separators stay '-' in every format: a slash
+// in the French one would be conventional but it also invites the reader to
+// take it for a US date, which is exactly the confusion being fixed.
+function order(y: number, m: number, d: number): string {
+	switch (current) {
+		case 'fr':
+			return `${pad(d)}-${pad(m)}-${y}`;
+		case 'us':
+			return `${pad(m)}-${pad(d)}-${y}`;
+	}
+	return `${y}-${pad(m)}-${pad(d)}`;
+}
+
+// formatDateTimeUTC renders a timestamp with the time, in UTC.
+//
+// UTC is not negotiable and is not part of the preference: a logbook is kept in
+// UTC, and a date shown in local time would disagree with the QSO's own record
+// twice a year.
+export function formatDateTimeUTC(s: unknown): string {
+	if (!s) return '';
+	const d = new Date(String(s));
+	if (isNaN(d.getTime())) return String(s);
+	return `${order(d.getUTCFullYear(), d.getUTCMonth() + 1, d.getUTCDate())} ${pad(d.getUTCHours())}:${pad(d.getUTCMinutes())}`;
+}
+
+// formatDateOnly renders a date with no time. It accepts both the ADIF form
+// (YYYYMMDD, used by every QSL and upload date) and anything Date can parse.
+export function formatDateOnly(s: unknown): string {
+	if (!s) return '';
+	const t = String(s).trim();
+	const m = t.match(/^(\d{4})(\d{2})(\d{2})/);
+	if (m) return order(Number(m[1]), Number(m[2]), Number(m[3]));
+	const d = new Date(t);
+	if (isNaN(d.getTime())) return t;
+	return order(d.getUTCFullYear(), d.getUTCMonth() + 1, d.getUTCDate());
+}

frontend/src/lib/greyline.ts

@@ -0,0 +1,130 @@
+// Grey line — the day/night terminator, and the twilight band around it where
+// HF propagation briefly does things it does at no other time.
+//
+// The maths is the standard low-precision solar position (Meeus, chapter 25, as
+// used by NOAA's solar calculator): good to well under a degree, which is far
+// finer than the band being drawn. No ephemeris, no network, no dependency —
+// this has to work in a field shack with no internet.
+//
+// Everything here is pure so it can be tested against known positions; the
+// drawing lives in the map component.
+
+const DEG = Math.PI / 180;
+
+// julianDay for a date, including the fraction of the day.
+export function julianDay(d: Date): number {
+	return d.getTime() / 86400000 + 2440587.5;
+}
+
+// Sun's declination and Greenwich hour angle, both in degrees.
+//
+// Returned together because they are computed from the same intermediates and
+// every caller needs both — splitting them into two exported functions would
+// double the work at each call for the sake of a tidier signature.
+export function sunPosition(date: Date): { dec: number; gha: number } {
+	const jd = julianDay(date);
+	const n = jd - 2451545.0; // days from J2000.0
+
+	// Mean longitude and mean anomaly of the Sun.
+	const L = (280.460 + 0.9856474 * n) % 360;
+	const g = ((357.528 + 0.9856003 * n) % 360) * DEG;
+
+	// Ecliptic longitude: the equation of centre applied to the mean longitude.
+	const lambda = (L + 1.915 * Math.sin(g) + 0.020 * Math.sin(2 * g)) * DEG;
+
+	// Obliquity of the ecliptic, slowly decreasing.
+	const eps = (23.439 - 0.0000004 * n) * DEG;
+
+	const dec = Math.asin(Math.sin(eps) * Math.sin(lambda)) / DEG;
+
+	// Right ascension, kept in the same quadrant as the ecliptic longitude —
+	// atan2 alone lands 180° out for half the year, which mirrors the whole
+	// terminator about the prime meridian. Six months of a plausible-looking
+	// wrong answer is exactly the kind of bug that survives review.
+	let ra = Math.atan2(Math.cos(eps) * Math.sin(lambda), Math.cos(lambda)) / DEG;
+	if (ra < 0) ra += 360;
+
+	// Greenwich mean sidereal time, in degrees.
+	const gmst = (280.46061837 + 360.98564736629 * n) % 360;
+
+	let gha = gmst - ra;
+	gha = ((gha % 360) + 360) % 360;
+	return { dec, gha };
+}
+
+// terminatorLatitude returns the latitude, at a given longitude, where the Sun
+// sits at `altitude` degrees above (or below) the horizon.
+//
+// altitude 0 is the geometric terminator; -6 is civil twilight, the outer edge
+// of the grey line as operators use the term.
+//
+// Returns null where no such latitude exists at that longitude — inside the
+// polar day or polar night, where the Sun never crosses that altitude at all.
+export function terminatorLatitude(lonDeg: number, dec: number, gha: number, altitude = 0): number | null {
+	const ha = (gha + lonDeg) * DEG; // local hour angle
+	const d = dec * DEG;
+	const h = altitude * DEG;
+
+	// From sin(alt) = sin(dec)sin(lat) + cos(dec)cos(lat)cos(ha), solved for lat:
+	//   A·sin(lat) + B·cos(lat) = sin(alt),  A = sin(dec), B = cos(dec)cos(ha)
+	//
+	// That has TWO solutions per meridian, and picking the wrong one is not a
+	// small error — it mirrors the answer about the equator. New York at 02:00
+	// local in December came out as daylight because the branch chosen put the
+	// terminator at +63° where it belongs at −63°: a shaded map that looks
+	// entirely plausible and is exactly wrong.
+	//
+	// So anchor on the geometric terminator, where the answer is unambiguous and
+	// classical, and take whichever branch is nearest it. At altitude 0 that
+	// reproduces it exactly; for the twilight band it follows it by continuity,
+	// which is the physical requirement — the twilight curve is a small offset
+	// from the terminator, never on the other side of the planet.
+	const A = Math.sin(d);
+	const B = Math.cos(d) * Math.cos(ha);
+	const R = Math.hypot(A, B);
+	if (R === 0) return null;
+	const s = Math.sin(h) / R;
+	if (s < -1 || s > 1) return null; // the Sun never reaches this altitude here
+
+	// The classical terminator. Division by zero is deliberate and correct here:
+	// at an equinox tan(dec) → 0 and the terminator becomes a meridian, which is
+	// exactly what atan(±Infinity) = ±90° expresses.
+	const t = Math.tan(d);
+	if (t === 0 && Math.cos(ha) === 0) return null; // degenerate: no crossing to name
+	const lat0 = Math.atan(-Math.cos(ha) / t) / DEG;
+
+	const phi = Math.atan2(B, A); // phase of the A·sin(lat) + B·cos(lat) sum
+	const fold = (x: number) => {
+		let v = ((x + 180) % 360 + 360) % 360 - 180;
+		if (v > 90) v = 180 - v;
+		if (v < -90) v = -180 - v;
+		return v;
+	};
+	const c1 = fold((Math.asin(s) - phi) / DEG);
+	const c2 = fold((Math.PI - Math.asin(s) - phi) / DEG);
+	return Math.abs(c1 - lat0) <= Math.abs(c2 - lat0) ? c1 : c2;
+}
+
+// nightPolygon returns a ring covering the part of the world where the Sun is
+// below `altitude`, ready for L.polygon (as [lat, lon] pairs).
+//
+// The ring runs along the terminator from west to east and closes along
+// whichever pole is in darkness — which pole that is flips with the season, and
+// getting it wrong shades the lit half of the planet.
+export function nightPolygon(date: Date, altitude = 0, stepDeg = 2): [number, number][] {
+	const { dec, gha } = sunPosition(date);
+	const ring: [number, number][] = [];
+
+	for (let lon = -180; lon <= 180; lon += stepDeg) {
+		const lat = terminatorLatitude(lon, dec, gha, altitude);
+		// Inside a polar day/night there is no crossing; clamp to the pole so the
+		// ring stays closed rather than tearing open across the map.
+		ring.push([lat === null ? (dec > 0 ? -90 : 90) : lat, lon]);
+	}
+
+	// Northern summer (positive declination) → the SOUTH pole is dark.
+	const pole = dec > 0 ? -90 : 90;
+	ring.push([pole, 180]);
+	ring.push([pole, -180]);
+	return ring;
+}

frontend/src/lib/i18n.tsx

@@ -51,7 +51,7 @@ const en: Dict = {
   'dup.colDate': 'Date / time (UTC)', 'dup.colFreq': 'Freq', 'dup.colRst': 'RST s/r', 'dup.colName': 'Name',
   'profileScope.saved': 'Saved for profile', 'profileScope.switch': '— switch profiles to edit another identity.',
   // Tabs
-  'tab.main': 'Main', 'tab.recent': 'Recent QSOs', 'tab.cluster': 'Cluster', 'tab.worked': 'Worked before',
+  'tab.main': 'Main', 'main.splitTip': 'Drag to resize the panes — double-click to even them out', 'tab.recent': 'Recent QSOs', 'tab.cluster': 'Cluster', 'tab.worked': 'Worked before',
   'tab.awards': 'Awards', 'tab.bandmap': 'Band Map', 'tab.contest': 'Contest', 'tab.net': 'Net',
   // Entry form
   'field.callsign': 'Callsign', 'field.name': 'Name', 'field.qth': 'QTH', 'field.grid': 'Grid',
@@ -63,7 +63,7 @@ const en: Dict = {
   // Language chooser
   'lang.choose': 'Choose your language', 'lang.chooseHint': 'You can change this later in Settings → General.',
   'lang.english': 'English', 'lang.french': 'Français', 'whatsnew.title': "What's new", 'whatsnew.close': 'Got it', 'whatsnew.none': 'No changelog available for this version yet.',
-  'settings.language': 'Language', 'settings.languageHint': 'Interface language.',
+  'settings.language': 'Language', 'gen.dateFormat': 'Date display', 'gen.dateStandard': 'Standard', 'gen.dateFR': 'French', 'gen.dateUS': 'US', 'settings.languageHint': 'Interface language.',
   'stats.tab': 'Statistics', 'stats.title': 'Logbook statistics', 'stats.loading': 'Crunching the log…',
   'stats.noData': 'No data', 'stats.charts': 'Charts', 'stats.table': 'Table', 'stats.refresh': 'Refresh',
   'stats.qsos': 'QSOs', 'stats.uniqueCalls': 'Unique callsigns', 'stats.entities': 'Entities',
@@ -135,8 +135,8 @@ const en: Dict = {
   'imp.ctyDesc': "Recompute Country, DXCC & CQ/ITU zones from cty.dat, overriding the file — corrects what contest software exports wrong (e.g. RG2Y as Asiatic instead of European Russia). ClubLog's DXpedition overrides are applied on top per QSO date (e.g. TO974REF → Reunion, TO2A 2012 → French Guiana) whenever the ClubLog data is downloaded. Everything else in the ADIF is kept as-is. Tip: use Update duplicates to re-fix QSOs already in your log.",
   'imp.stationTitle': 'Fill my station fields from my profile',
   'imp.stationDesc': "Backfill empty MY_* fields (my grid, rig, antenna, address, city, state, county, SOTA/POTA ref, TX power…) plus Operator and Owner callsign from your active profile. Existing values are kept. Only STATION_CALLSIGN is left untouched so a mixed-call log isn't re-routed. It ALSO stamps your default confirmation statuses (paper QSL, LoTW, eQSL, Club Log, HRDLog, QRZ.com sent and received) on the ones the file leaves empty — a WSJT-X log carries almost none. Enable when importing your own log.",
-  'imp.cancel': 'Cancel', 'imp.mapAdd': 'The file puts a field in the wrong place\u2026', 'imp.mapTitle': 'Move fields on import', 'imp.mapDesc': 'Contest software stores the exchange where its own module keeps it. The RSGB IOTA contest exports the island reference in STATE \u2014 imported as-is it becomes a US state and the IOTA award stays empty. The destination is only filled where the file left it blank.', 'imp.mapMore': 'Add another', 'imp.import': 'Import',
-  'imp.progressTitle': 'Importing ADIF…',
+  'imp.cancel': 'Cancel', 'rec.manualStart': 'Record this contact. Automatic recording is off, so capture starts now \u2014 there is no pre-roll of what came before.', 'rec.stop': 'Stop the recording. The audio is kept and still saved with the QSO \u2014 stop it to play it back to the station you are working.', 'rec.resume': 'Carry on recording, appending to what is already captured.', 'rec.playOnAir': 'TRANSMIT the recording to the station you are working: keys the radio and sends it like a voice-keyer message.', 'rec.stopPlaying': 'Stop transmitting the recording', 'rec.manualFailed': 'Recording could not be started \u2014 check the audio devices in Settings.', 'imp.mapAdd': 'The file puts a field in the wrong place\u2026', 'imp.mapTitle': 'Move fields on import', 'imp.mapDesc': 'Contest software stores the exchange where its own module keeps it. The RSGB IOTA contest exports the island reference in STATE \u2014 imported as-is it becomes a US state and the IOTA award stays empty. The destination is only filled where the file left it blank.', 'imp.mapMore': 'Add another', 'imp.import': 'Import',
+  'imp.progressTitle': 'Importing ADIF…', 'bulk.progressTitle': 'Updating the selected QSOs\u2026',
   'imp.progressCount': '{done} / {tot} records · {pct}%', 'imp.progressCountOnly': '{done} records…',
   'imp.complete': 'Import complete.',
   'imp.imported': '{n} imported', 'imp.updated': '{n} updated', 'imp.duplicates': '{n} duplicates', 'imp.skipped': '{n} skipped', 'imp.total': '{n} total',
@@ -277,7 +277,7 @@ const en: Dict = {
   'extsvc.hint': 'Upload logged QSOs to online logbooks. Each service uploads automatically on a new QSO when enabled; timing is per-service (immediate, or a 1–2 min delay so a mis-logged QSO can still be fixed first).',
   'hw.motorTxInhibit': 'Inhibit transmission while the antenna is moving', 'hw.motorTxInhibitHint': 'Blocks the FlexRadio from transmitting while the elements move (needs FlexRadio in API mode + this antenna enabled). No effect with other radios.', 'hw.motorAntenna': 'Ultrabeam / Steppir', 'hw.motorEnable': 'Enable antenna control', 'hw.motorType': 'Antenna type', 'hw.motorTransport': 'Connection', 'hw.motorTcp': 'Network (TCP)', 'hw.motorSerial': 'Serial (COM)', 'hw.motorCom': 'Serial port', 'hw.motorBaud': 'Baud', 'hw.steppirHint': 'SteppIR controllers are RS-232 serial (the DATA OUT DB9 port). Serial = a USB↔RS-232 (FTDI) adapter, shown as a COM port. Network = a serial-to-Ethernet bridge (as for the Ultrabeam).', 'hw.steppirRange': 'Tunable range', 'hw.steppirRangeHint': "The SteppIR's frequency coverage. On a band outside this range (e.g. 30 m on a 20 m–6 m SteppIR) OpsLog won't try to tune the antenna and won't inhibit transmission. Default 13–54 MHz (20 m–6 m); widen the low edge (e.g. 6) for a 40 m-equipped SteppIR.", 'hw.ultrabeam': 'Antenna (Ultrabeam)', 'hw.audioVoice': 'Audio devices & voice keyer',
   // CAT panel body
-  'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig (any rig, Windows COM)', 'cat.optFlex': 'FlexRadio / SmartSDR (native)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'A native CAT backend owns the radio serial port, so no other program can reach it. This lets WSJT-X, JTDX, MSHV or Log4OM talk to the rig THROUGH OpsLog: in the other program pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532. Works with every backend, not only the native ones.', 'cat.sharePort': 'Sharing port', 'cat.optXiegu': 'Xiegu (native CI-V)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.optYaesu': 'Yaesu (native CAT)', 'cat.optKenwood': 'Kenwood (native)', 'cat.civTrace': 'Log the CI-V protocol', 'cat.civTraceHint': 'Writes every CI-V frame to and from the radio into the log, as hex. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.optIcom': 'Icom CI-V (USB serial)', 'cat.optIcomNet': 'Icom CI-V (network / remote)', 'cat.optTci': 'TCI (Expert Electronics / SunSDR)',
+  'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'A native CAT backend owns the radio serial port, so no other program can reach it. This lets WSJT-X, JTDX, MSHV or Log4OM talk to the rig THROUGH OpsLog: in the other program pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532. Works with every backend, not only the native ones.', 'cat.sharePort': 'Sharing port', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.xieguPTTLine': 'How the rig is keyed', 'cat.xieguPTTCiv': 'CI-V command', 'cat.xieguPTTHint': 'A G90 does not transmit on the CI-V command: interfaces like the DE-19 key it on RTS or DTR. Pick the line yours uses \u2014 it is also what lets WSJT-X transmit through the shared CAT link.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.kenwoodHostHint': 'A serial-over-network bridge \u2014 ser2net, an Ethernet-serial adapter, a Raspberry Pi at the radio. Filled in, it is used INSTEAD of the COM port above. This is not the radio\u2019s own RJ45 socket, which speaks Kenwood\u2019s KNS protocol and is not supported.', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.lowerLines': 'Lower the DTR and RTS lines on connect', 'cat.lowerLinesHint': 'Windows raises both when the port opens, and some interfaces read either line as PTT — the radio then transmits for as long as OpsLog runs. Tick this only if that happens: other interfaces need RTS raised to transmit at all, and lowering it makes the rig go silent.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved',
   'cat.icomNetHost': 'Rig IP / hostname', 'cat.icomNetUser': 'Network user (ID)', 'cat.icomNetPass': 'Network password',
   'cat.icomNetHint': "Connects to the rig's built-in LAN server directly — no RS-BA1 or Remote Utility needed (close them first). Use the Network User1 ID/Password set in the rig's Network menu. A rig in standby is powered on automatically.",
   'cat.icomNetAudio': 'Stream RX audio over the network (experimental)',
@@ -298,7 +298,7 @@ const en: Dict = {
   'es.usernameCall': 'Username (callsign)', 'es.eqslUserPh': 'your eQSL.cc login (callsign)', 'es.eqslPwPh': 'eQSL.cc account password', 'es.qthNick': 'QTH nickname', 'es.qthNickPh': 'optional — required only if your eQSL account has several QTHs', 'es.eqslHint': 'The QTH nickname tells eQSL which location profile to file the QSO under. Leave blank if you have only one.',
   'es.lotwUser': 'LoTW user', 'es.lotwUserPh': 'LoTW website login (for downloading confirmations)', 'es.lotwPw': 'LoTW password', 'es.lotwPwPh': 'LoTW website password', 'es.tqslPath': 'TQSL path', 'es.stationLoc': 'Station location', 'es.pickLoc': '— pick a TQSL location —', 'es.noLoc': 'No TQSL locations found', 'es.reloadLoc': 'Reload locations from TQSL', 'es.lotwForcePh': "e.g. F4BPO/P — leave blank to use the QSO's own call", 'es.lotwForceHint': 'Overrides STATION_CALLSIGN at sign time so one certificate can sign several calls (F4BPO, F4BPO/P, TM2Q). Pick the matching Station Location above.', 'es.keyPw': 'Key password', 'es.keyPwPh': 'only if your certificate key has a password', 'es.considerUnsent': 'Consider as unsent', 'es.flagN': 'No (N)', 'es.flagR': 'Requested (R)', 'es.lotwUnsentHint': "At app close, every QSO whose LoTW sent status is one of these is signed and uploaded in one TQSL batch — including QSOs imported from an ADIF. Uploaded QSOs become Y and won't be re-sent. Must include your default sent status from Confirmations.", 'es.lotwAutoClose': 'Automatic upload on application close', 'es.lotwWriteLog': 'Write TQSL diagnostic log (-t)',
   'es.potaHint': 'Update your QSOs with the park reference from your pota.app hunter log. Paste your session token: log in at pota.app, open the browser DevTools → Network tab, click any api.pota.app request, and copy the full Authorization header value. The token expires after a while — re-copy it if the sync fails.', 'es.sessionToken': 'Session token', 'es.saving': 'Saving…', 'es.saveToken': 'Save token', 'es.potaThen': 'Then run the sync from the QSL Manager tab → service POTA hunter log (you can see and fix unmatched QSOs there).',
-  'es.soon': 'soon', 'es.comingSoon': '{name} — coming soon', 'es.notWired': "This external service isn't wired up yet.",
+  'es.soon': 'soon', 'es.deleteRemote': 'Also delete from QRZ.com and Club Log', 'es.deleteRemoteHint': 'When you delete a QSO here, withdraw it from those services too. QRZ.com can only delete records OpsLog uploaded itself \u2014 older ones must be removed on the website.', 'es.comingSoon': '{name} — coming soon', 'es.notWired': "This external service isn't wired up yet.",
   'lotw.usersTitle': 'LoTW user list', 'lotw.usersHint': "Downloads ARRL's public list of LoTW users + their last-upload date, to show a colour-coded LoTW badge next to a callsign (green < 1 week · amber 1–4 weeks · red > 30 days).", 'lotw.usersDownload': 'Download LoTW user list', 'lotw.usersDownloading': 'Downloading…', 'lotw.usersLoaded': '{n} users loaded · updated {date}', 'lotw.usersNone': 'Not downloaded yet — the badge stays hidden until you do.',
   'scp.title': 'Super Check Partial', 'scp.partial': 'Partial', 'scp.close': 'Close', 'scp.fill': 'Fill {call}', 'scp.none': 'No match', 'scp.typeMore': 'Type a call…', 'scp.noList': 'Download the SCP list in Settings → General.', 'scp.enable': 'Super Check Partial / N+1 callsign helper', 'scp.settingsHint': 'Downloads the community MASTER.SCP master list and shows a two-column widget as you type a call: Partial (known calls containing what you typed) and N+1 (calls one character away) — to spot and fix a busted call.', 'scp.download': 'Update SCP list', 'scp.downloading': 'Downloading…', 'scp.loaded': '{n} calls loaded · updated {date}', 'scp.notLoaded': 'Not downloaded yet.',
   'hw.connecting': 'Connecting…', 'hw.testConn': 'Test connection', 'hw.sending': 'Sending…', 'hw.testRotator': 'Test (point to 0°)',
@@ -352,6 +352,12 @@ const en: Dict = {
   'wkp.autoCallHint': 'Click a CQ macro (one whose text contains CQ) to resend it on a loop — message, gap, repeat — until you send another macro (e.g. a report), press Stop, or hit ESC. Non-CQ macros send once.', 'wkp.autoCall': 'Auto-call', 'wkp.gap': 'gap', 'wkp.gapHint': 'Seconds to wait after the message before resending', 'wkp.loopHint': 'click a CQ macro to loop it', 'wkp.macroN': 'Macro {n}',
   'dvkp.voiceKeyer': 'Voice keyer', 'dvkp.autoCq': 'Auto CQ', 'dvkp.autoCqHint': 'Repeat a CQ-labelled message on a timer until you stop it or play another slot', 'dvkp.gap': 'Gap', 'dvkp.notPhone': 'The voice keyer only transmits on a phone mode (SSB/AM/FM)', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Disable voice keyer', 'dvkp.noMsgPre': 'No messages recorded yet. Open', 'dvkp.settingsPath': 'Settings → Audio devices & voice keyer', 'dvkp.noMsgPost': 'to record F1–F6.', 'dvkp.transmit': 'Transmit F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — empty', 'dvkp.message': 'message',
   'agp.portDeselect': 'Port {letter} — click to deselect', 'agp.portSelect': 'Select on port {letter}', 'agp.online': 'online', 'agp.offline': 'offline', 'agp.close': 'Close', 'agp.connecting': 'Connecting…', 'agp.noAntennas': 'No antennas configured.', 'agp.filterOnHint': 'Showing antennas for {band} only — click to show all bands', 'agp.filterOffHint': 'Showing all antennas — click to show only the current band',
+  'ampw.title': 'Amplifier', 'ampw.all': 'All amplifiers', 'ampw.pick': 'Which amplifier the widget shows',
+  'ampw.showHint': 'Amplifier · click to show', 'ampw.hideHint': 'Amplifier — shown · click to hide',
+  'ampw.close': 'Close', 'ampw.offline': 'offline', 'ampw.none': 'No amplifier configured',
+  'ampw.operate': 'Operate', 'ampw.standby': 'Standby', 'ampw.on': 'ON', 'ampw.off': 'OFF',
+  'ampw.lvlL': 'Low', 'ampw.lvlM': 'Mid', 'ampw.lvlH': 'High',
+  'ampw.pwr': 'Watts', 'ampw.swr': 'SWR', 'ampw.temp': 'Temp', 'ampw.id': 'Id (A)', 'ampw.fan': 'Fan mode',
   'tgp.online': 'online', 'tgp.offline': 'offline', 'tgp.close': 'Close', 'tgp.connecting': 'Connecting…', 'tgp.swr': 'SWR', 'tgp.power': 'Fwd power', 'tgp.tune': 'Tune', 'tgp.tuning': 'Tuning…', 'tgp.tuneHint': 'Start an automatic tuning cycle on the active channel — key the rig into a carrier so the tuner can measure SWR', 'tgp.bypass': 'Bypass', 'tgp.bypassHint': 'Toggle global bypass — route the antenna straight through, tuner out of line', 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Toggle Operate / Standby',
   'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Channel {letter} — active', 'tgp.chSelect': 'Make channel {letter} active', 'tgp.chActiveTag': 'active', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypassed', 'tgp.inLine': 'In line',
   'flxp.ritHint': 'RIT — shifts your RECEIVE frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.', 'flxp.xitHint': 'XIT — shifts your TRANSMIT frequency only. Wheel, ± or arrow keys to adjust (Ctrl = 100 Hz). The offset is kept when you switch it off.',
@@ -366,14 +372,14 @@ const en: Dict = {
   'ncp.newNetPrompt': 'New NET name:', 'ncp.renamePrompt': 'Rename NET:', 'ncp.deleteConfirm': 'Delete NET "{name}" and its roster? This cannot be undone.', 'ncp.closeConfirm': "{n} station(s) still on the air will be dropped WITHOUT logging. Close anyway?", 'ncp.removeConfirm': "Remove {n} station(s) from this NET's roster?", 'ncp.colCallsign': 'Callsign', 'ncp.colName': 'Name', 'ncp.colTimeOn': 'Time on', 'ncp.colBand': 'Band', 'ncp.colMode': 'Mode', 'ncp.colComment': 'Comment', 'ncp.colCountry': 'Country', 'ncp.colDate': 'Date', 'ncp.workedBefore': 'Worked before', 'ncp.wbHint': 'Click a station (on air or roster) to see prior QSOs', 'ncp.wbNone': 'No prior QSO with', 'ncp.wbFirst': 'first', 'ncp.wbLast': 'last', 'ncp.wbResize': 'Drag to resize', 'ncp.newNet': 'New NET', 'ncp.closeToSwitch': 'Close the NET to switch', 'ncp.selectNetTitle': 'Select a NET', 'ncp.selectNetOption': '— select a NET —', 'ncp.closeNet': 'Close NET', 'ncp.openNet': 'Open NET', 'ncp.rename': 'Rename', 'ncp.delete': 'Delete', 'ncp.netOpenBadge': 'NET OPEN', 'ncp.onAir': 'On air:', 'ncp.roster': 'Roster:', 'ncp.onAirActive': 'On air — active QSOs', 'ncp.activeHint': 'mic-pass order · ⬆⬇ to reorder · double-click → edit · "Log & end" to save', 'ncp.moveUp': 'Move up the mic-pass order', 'ncp.moveDown': 'Move down the mic-pass order', 'ncp.logEndSelected': 'Log & end selected', 'ncp.logAll': 'Log everyone ({n})', 'ncp.logAllConfirm': 'Log all {n} on-air station(s) to the logbook?', 'ncp.netUsersRoster': 'NET users — roster', 'ncp.rosterHint': 'double-click → put on air', 'ncp.addContact': 'Add contact', 'ncp.remove': 'Remove', 'ncp.putOnAir': 'Put selected on air', 'ncp.addContactTitle': 'Add contact to NET', 'ncp.addContactDesc': "Saved in this NET's roster (reused next time you open it).", 'ncp.callsign': 'Callsign', 'ncp.search': 'Search', 'ncp.name': 'Name', 'ncp.country': 'Country', 'ncp.cancel': 'Cancel', 'ncp.saveInNet': 'Save in NET',
   'udpp.svcWsjtLabel': 'WSJT-X / JTDX / MSHV', 'udpp.svcWsjtHint': 'Auto-logs FT8/FT4/etc. QSOs and fills the entry callsign live.', 'udpp.svcAdifLabel': 'ADIF message (JTAlert, GridTracker)', 'udpp.svcAdifHint': 'Receives a single ADIF record per packet and logs it.', 'udpp.svcN1mmLabel': 'N1MM Logger+ (contest XML)', 'udpp.svcN1mmHint': 'Receives contest QSOs as XML messages.', 'udpp.svcRemoteLabel': 'Remote callsign (DXHunter, custom)', 'udpp.svcRemoteHint': 'A short text packet containing just a callsign — fills the entry field.', 'udpp.svcDbLabel': 'ADIF Message', 'udpp.svcDbHint': 'Sends the ADIF of every QSO you log to a remote listener (Cloudlog UDP, N1MM, …).', 'udpp.svcPstLabel': 'PstRotator frequency', 'udpp.svcPstHint': 'Sends the rig frequency as <PST><FREQUENCY> whenever it changes — set PstRotatorAz tracker to DXLog.net (default port 12040).', 'udpp.svcN1mmRadioLabel': 'N1MM RadioInfo (freq + mode)', 'udpp.svcN1mmRadioHint': 'Broadcasts the rig frequency/mode as N1MM Logger+ RadioInfo XML on every change — consumed by PstRotator (N1MM tracker) and many other tools.', 'udpp.deleteConfirm': 'Delete this UDP connection?', 'udpp.loading': 'Loading…', 'udpp.intro': 'UDP connections let OpsLog talk to other ham radio software. Inbound connections receive QSOs or callsigns and update the logbook live; outbound connections notify other apps when you log a QSO locally. Enable multicast to share a port with another listener without conflict — required for the typical WSJT-X 2237 setup.', 'udpp.inboundTitle': 'Inbound — OpsLog listens', 'udpp.outboundTitle': 'Outbound — OpsLog sends', 'udpp.reloadAll': 'Reload all', 'udpp.reloadHint': 'Restarts every enabled listener after a manual change.', 'udpp.add': 'Add', 'udpp.noConnection': 'No connection.', 'udpp.unnamed': '(unnamed)', 'udpp.dialogTitle': '{action} {direction} connection', 'udpp.new': 'New', 'udpp.edit': 'Edit', 'udpp.directionInbound': 'inbound', 'udpp.directionOutbound': 'outbound', 'udpp.name': 'Name', 'udpp.namePhInbound': 'WSJT-X log', 'udpp.namePhOutbound': 'Cloudlog notify', 'udpp.serviceType': 'Service type', 'udpp.port': 'Port', 'udpp.multicast': 'Multicast', 'udpp.multicastGroup': 'Multicast group', 'udpp.multicastHint': 'Use the same group address as the sending app. WSJT-X default is 224.0.0.1.', 'udpp.destinationIp': 'Destination IP', 'udpp.enabled': 'Enabled', 'udpp.cancel': 'Cancel', 'udpp.save': 'Save',
   'fltb.fCallsign': 'Callsign', 'fltb.fDate': 'Date / time (UTC)', 'fltb.fEndDate': 'End date / time', 'fltb.fBand': 'Band', 'fltb.fRxBand': 'RX band', 'fltb.fMode': 'Mode', 'fltb.fSubmode': 'Submode', 'fltb.fFreq': 'Frequency (Hz)', 'fltb.fRxFreq': 'RX frequency (Hz)', 'fltb.fRstSent': 'RST sent', 'fltb.fRstRcvd': 'RST rcvd', 'fltb.fName': 'Name', 'fltb.fQth': 'QTH', 'fltb.fAddress': 'Address', 'fltb.fEmail': 'E-mail', 'fltb.fGrid': 'Grid', 'fltb.fCountry': 'Country', 'fltb.fState': 'State', 'fltb.fCounty': 'County', 'fltb.fDxcc': 'DXCC #', 'fltb.fContinent': 'Continent', 'fltb.fCqz': 'CQ zone', 'fltb.fItuz': 'ITU zone', 'fltb.fIota': 'IOTA', 'fltb.fSota': 'SOTA ref', 'fltb.fPota': 'POTA ref', 'fltb.fWwff': 'WWFF ref', 'fltb.fRig': 'Rig', 'fltb.fAntenna': 'Antenna', 'fltb.fQslSent': 'Paper QSL sent status', 'fltb.fQslSentDate': 'Paper QSL sent date', 'fltb.fQslRcvd': 'Paper QSL received status', 'fltb.fQslRcvdDate': 'Paper QSL received date', 'fltb.fQslVia': 'QSL via', 'fltb.fLotwSent': 'LoTW sent status', 'fltb.fLotwSentDate': 'LoTW sent date', 'fltb.fLotwRcvd': 'LoTW received status', 'fltb.fLotwRcvdDate': 'LoTW received date', 'fltb.fEqslSent': 'eQSL sent status', 'fltb.fEqslSentDate': 'eQSL sent date', 'fltb.fEqslRcvd': 'eQSL received status', 'fltb.fEqslRcvdDate': 'eQSL received date', 'fltb.fQrzSent': 'QRZ.com sent status', 'fltb.fQrzSentDate': 'QRZ.com sent date', 'fltb.fQrzRcvd': 'QRZ.com received status', 'fltb.fQrzRcvdDate': 'QRZ.com received date', 'fltb.fClublogSent': 'Club Log sent status', 'fltb.fClublogSentDate': 'Club Log sent date', 'fltb.fHrdlogSent': 'HRDLog sent status', 'fltb.fHrdlogSentDate': 'HRDLog sent date', 'fltb.fContestId': 'Contest ID', 'fltb.fSerialRcvd': 'Serial rcvd', 'fltb.fSerialSent': 'Serial sent', 'fltb.fPropMode': 'Propagation mode', 'fltb.fSatellite': 'Satellite', 'fltb.fMyCallsign': 'Station callsign (my call)', 'fltb.fOperator': 'Operator', 'fltb.fOwnerCallsign': 'Owner callsign', 'fltb.fMyGrid': 'My grid', 'fltb.fMyCountry': 'My country', 'fltb.fMyState': 'My state', 'fltb.fMyCounty': 'My county', 'fltb.fMyIota': 'My IOTA', 'fltb.fMySota': 'My SOTA ref', 'fltb.fMyPota': 'My POTA ref', 'fltb.fMyWwff': 'My WWFF ref', 'fltb.fMyStreet': 'My street', 'fltb.fMyCity': 'My city', 'fltb.fMyPostal': 'My postal code', 'fltb.fMyRig': 'My rig', 'fltb.fMyAntenna': 'My antenna', 'fltb.fTxPower': 'TX power (W)', 'fltb.fComment': 'Comment', 'fltb.fNotes': 'Notes', 'fltb.opEq': 'equals (=)', 'fltb.opNe': 'not equal (≠)', 'fltb.opContains': 'contains', 'fltb.opStartsWith': 'starts with', 'fltb.opEndsWith': 'ends with', 'fltb.opGt': 'greater than (>)', 'fltb.opLt': 'less than (<)', 'fltb.opGe': 'greater or equal (≥)', 'fltb.opLe': 'less or equal (≤)', 'fltb.opEmpty': 'is empty', 'fltb.opNotEmpty': 'is not empty', 'fltb.title': 'QSO filter', 'fltb.match': 'Match', 'fltb.all': 'ALL (AND)', 'fltb.any': 'ANY (OR)', 'fltb.loadPreset': 'Load preset…', 'fltb.noConditions': 'No conditions — the list shows all QSOs. Add one below.', 'fltb.where': 'WHERE', 'fltb.valuePh': 'value', 'fltb.remove': 'Remove', 'fltb.addCondition': 'Add condition', 'fltb.presetNamePh': 'Preset name…', 'fltb.savePreset': 'Save preset', 'fltb.clear': 'Clear', 'fltb.cancel': 'Cancel', 'fltb.applyClose': 'Apply & close',
-  'detp.propAS': 'Aircraft Scatter', 'detp.propAUR': 'Aurora', 'detp.propAUE': 'Aurora-E', 'detp.propBS': 'Back Scatter', 'detp.propEME': 'Earth-Moon-Earth', 'detp.propES': 'Sporadic E', 'detp.propFAI': 'Field Aligned Irregularities', 'detp.propF2': 'F2 Reflection', 'detp.propGWAVE': 'Ground Wave', 'detp.propINTERNET': 'Internet-assisted', 'detp.propION': 'Ionoscatter', 'detp.propLOS': 'Line of Sight', 'detp.propMS': 'Meteor Scatter', 'detp.propRPT': 'Terrestrial / atmospheric repeater', 'detp.propRS': 'Rain Scatter', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-Equatorial', 'detp.propTR': 'Tropospheric Ducting', 'detp.pathShort': 'Short Path', 'detp.pathLong': 'Long Path', 'detp.pathGrayline': 'Grayline', 'detp.pathOther': 'Other', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Awards', 'detp.tabMy': 'My', 'detp.tabExtended': 'Extended', 'detp.statePref': 'State / pref', 'detp.county': 'County', 'detp.prefix': 'Prefix', 'detp.cqZone': 'CQ zone', 'detp.ituZone': 'ITU zone', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimuth LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Address', 'detp.qslMessage': 'QSL message', 'detp.qslVia': 'QSL via', 'detp.detected': 'Detected — this contact will count for:', 'detp.azimuth': 'Azimuth (°)', 'detp.elevation': 'Elevation (°)', 'detp.txPower': 'TX power (W)', 'detp.satelliteMode': 'Satellite mode', 'detp.antPath': 'Ant. path', 'detp.propagation': 'Propagation', 'detp.rig': 'Rig', 'detp.antenna': 'Antenna', 'detp.satName': 'Satellite name', 'detp.contestId': 'Contest ID', 'detp.rcvdExchangePh': 'rcvd exchange', 'detp.sentExchangePh': 'sent exchange', 'detp.contactedEmail': 'Contacted email',
+  'detp.propAS': 'Aircraft Scatter', 'detp.propAUR': 'Aurora', 'detp.propAUE': 'Aurora-E', 'detp.propBS': 'Back Scatter', 'detp.propEME': 'Earth-Moon-Earth', 'detp.propES': 'Sporadic E', 'detp.propFAI': 'Field Aligned Irregularities', 'detp.propF2': 'F2 Reflection', 'detp.propGWAVE': 'Ground Wave', 'detp.propINTERNET': 'Internet-assisted', 'detp.propION': 'Ionoscatter', 'detp.propLOS': 'Line of Sight', 'detp.propMS': 'Meteor Scatter', 'detp.propRPT': 'Terrestrial / atmospheric repeater', 'detp.propRS': 'Rain Scatter', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-Equatorial', 'detp.propTR': 'Tropospheric Ducting', 'detp.pathShort': 'Short Path', 'detp.pathLong': 'Long Path', 'detp.pathGrayline': 'Grayline', 'detp.pathOther': 'Other', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Awards', 'detp.tabMy': 'My', 'detp.tabExtended': 'Extended', 'detp.statePref': 'State / pref', 'detp.county': 'County', 'detp.newCounty': 'NEW', 'detp.newCountyTip': 'County never worked before', 'detp.prefix': 'Prefix', 'detp.cqZone': 'CQ', 'detp.ituZone': 'ITU', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimuth LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Address', 'detp.qslMessage': 'QSL message', 'detp.qslVia': 'QSL via', 'detp.detected': 'Detected — this contact will count for:', 'detp.ambiguous': 'Ambiguous — pick one:', 'detp.azimuth': 'Azimuth (°)', 'detp.elevation': 'Elevation (°)', 'detp.txPower': 'TX power (W)', 'detp.satelliteMode': 'Satellite mode', 'detp.antPath': 'Ant. path', 'detp.propagation': 'Propagation', 'detp.rig': 'Rig', 'detp.antenna': 'Antenna', 'detp.satName': 'Satellite name', 'detp.contestId': 'Contest ID', 'detp.rcvdExchangePh': 'rcvd exchange', 'detp.sentExchangePh': 'sent exchange', 'detp.contactedEmail': 'Contacted email',
   // Awards (ref picker / ref selector / awards panel / award editor)
   'awrp.remove': 'Remove', 'awrp.searchLabel': 'Search {label}…', 'awrp.searching': 'Searching…', 'awrp.noMatch': 'No match.', 'awrp.noMatchDxcc': 'No match for this DXCC.',
   'awrs.group': 'Group', 'awrs.sub': 'Sub', 'awrs.pickReference': '← pick a reference', 'awrs.add': 'Add', 'awrs.enterCallsignFirst': 'Enter a callsign first', 'awrs.noRefsAdded': 'No references added yet', 'awrs.references': 'References', 'awrs.autoMatchTitle': 'The {field} field is {code} — this award counts it automatically', 'awrs.fromField': 'from {field}', 'awrs.autoClickToAdd': 'auto — click to add', 'awrs.search': 'Search…', 'awrs.addUnlistedTitle': "Add this reference even though it isn't in the list yet (new / unlisted)", 'awrs.addPrefix': '+ Add', 'awrs.unlisted': '(unlisted)', 'awrs.searching': 'Searching…', 'awrs.typeToSearch': 'Type 2+ chars to search', 'awrs.enterCallsignOrSearch': 'Enter a callsign, or type to search.', 'awrs.noRefsForEntity': 'No references for this entity.', 'awrs.noResults': 'No results.', 'awrs.downloadLists': 'Download reference lists in the Awards panel → Import data.',
-  'awp.awards': 'Awards', 'awp.editAwards': 'Edit awards', 'awp.rescanTitle': 'Re-pull the logbook and recompute (picks up new LoTW/QRZ confirmations)', 'awp.rescan': 'Rescan', 'awp.selectAward': 'Select an award…', 'awp.of': 'of', 'awp.computing': 'Computing…', 'awp.noData': 'No data', 'awp.worked': 'worked', 'awp.confirmed': 'confirmed', 'awp.validated': 'validated', 'awp.ofConfirmed': 'of {total} · {pct}% confirmed', 'awp.byBand': 'By band (confirmed / worked)', 'awp.filterReferences': 'Filter references…', 'awp.filterAll': 'All', 'awp.filterWkd': 'Wkd', 'awp.filterNotWkd': 'Not wkd', 'awp.filterWkdNotCfmd': 'Wkd not cfmd', 'awp.refs': 'refs', 'awp.missingRefsTitle': "Contacts in this award's scope (right DXCC/band/mode) but with no reference — they're excluded until you add it", 'awp.missingRefs': 'Missing refs', 'awp.gridView': 'Grid view', 'awp.listView': 'List view', 'awp.statistics': 'Statistics', 'awp.statistic': 'Statistic', 'awp.total': 'Total', 'awp.grand': 'Grand', 'awp.ref': 'Ref', 'awp.description': 'Description', 'awp.cellTitle': '{ref} · {band} — click to view QSOs', 'awp.name': 'Name', 'awp.groupCol': 'Group', 'awp.status': 'Status', 'awp.bands': 'Bands', 'awp.missing': '— missing', 'awp.contactsMissingRef': 'contacts missing a reference', 'awp.recomputeTitle': "Recompute now — contacts you've fixed drop off the list", 'awp.refresh': 'Refresh', 'awp.missingScopeHelp': "In this award's scope (DXCC / band / mode / dates) but no reference was found — so they don't count yet. Sort by a column, tick the matching contacts, then assign the reference below.", 'awp.orClickRow': '(Or click a row to open the QSO.)', 'awp.selectedArrow': '{n} selected →', 'awp.chooseReference': 'Choose a reference to assign…', 'awp.assignToSelected': 'Assign to {n} selected', 'awp.scanning': 'Scanning…', 'awp.noGaps': 'No gaps found. (Missing-reference detection applies to awards scoped to a DXCC entity — e.g. DDFM, WAS, RAC, WAJA.)', 'awp.dateUtc': 'Date (UTC)', 'awp.callsign': 'Callsign', 'awp.band': 'Band', 'awp.mode': 'Mode', 'awp.country': 'Country', 'awp.qthNote': 'QTH / Note', 'awp.stations': 'stations', 'awp.contactsWithoutRef': 'contacts without a reference', 'awp.assignedMsg': 'Assigned {code}@{ref} to {n} contact(s).', 'awp.loading': 'Loading…', 'awp.noQsos': 'No QSOs.',
-  'awed.addCountry': 'Add country…', 'awed.exportedTo': 'Awards exported to:\n{path}', 'awed.importedMsg': 'Imported {awards} award(s) and {references} reference(s).', 'awed.awardManagement': 'Award management', 'awed.searchAwards': 'Search awards…', 'awed.newAward': 'New award', 'awed.clickToDismiss': 'Click to dismiss', 'awed.selectOrCreate': 'Select or create an award.', 'awed.tabInfo': 'Award info', 'awed.tabType': 'Award type', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'References', 'awed.awardName': 'Award name', 'awed.valid': 'Valid', 'awed.deleteAward': 'Delete award', 'awed.description': 'Description', 'awed.awardUrl': 'Award URL', 'awed.refDisplay': 'Column shows', 'awed.refDisplayRef': 'Reference', 'awed.refDisplayName': 'Description / name', 'awed.refDisplayBoth': 'Both (ref — name)', 'awed.referenceUrl': 'Reference URL', 'awed.validFrom': 'Valid from', 'awed.validTo': 'Valid to', 'awed.dxccFilter': 'DXCC filter', 'awed.validBands': 'Valid bands (empty = all)', 'awed.emission': 'Emission (empty = all)', 'awed.validModes': 'Valid modes (empty = all)', 'awed.awardType': 'Award type', 'awed.dynamicRefs': 'Dynamic references (not predefined — any value counts, like POTA)', 'awed.qsoParams': 'QSO parameters (used by QSOFIELDS / REFERENCE types)', 'awed.searchInField': 'Search in field', 'awed.matchBy': 'Match by', 'awed.exactMatch': 'Exact match (else search reference inside the field)', 'awed.patternRegex': 'Pattern (regex)', 'awed.patternPlaceholder': 'group 1 = reference (for match-by pattern / dynamic)', 'awed.leadingString': 'Leading string', 'awed.trailingString': 'Trailing string', 'awed.additionalSearches': 'Fallback searches', 'awed.orAlsoMatch': '— tried in order, only if nothing matched yet; first hit wins', 'awed.addOr': 'Add OR', 'awed.orSearchIn': 'OR — search in', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Remove this OR search', 'awed.orPatternPlaceholder': 'regex — group 1 = reference (e.g. \\b(\\d{2})\\d{3}\\b for postal → dept)', 'awed.prefixPlaceholder': 'prefix (D)', 'awed.prefixTitle': 'Prepended to each found reference, e.g. 74 → D74', 'awed.confirmationLabel': 'Confirmation (worked → confirmed)', 'awed.validationLabel': 'Validation (confirmed → validated)', 'awed.resetDefaults': 'Reset to defaults', 'awed.exportTitle': 'Export all award definitions + reference lists to a JSON backup', 'awed.export': 'Export…', 'awed.importTitle': 'Import an award bundle (definitions + reference lists)', 'awed.import': 'Import…', 'awed.cancel': 'Cancel', 'awed.save': 'Save', 'awed.populatedMsg': 'Populated {n} built-in references.', 'awed.newRefCodePrompt': 'New reference code:', 'awed.importedRefsMsg': 'Imported {n} references.', 'awed.referenceCount': 'Reference count:', 'awed.applyPreset': 'Apply preset…', 'awed.pasteCsv': 'Paste / CSV', 'awed.populateBuiltinTitle': 'Replace with the shipped built-in list (DXCC entities, French departments, …)', 'awed.populateBuiltin': 'Populate built-in', 'awed.updateOnline': 'Update online', 'awed.add': 'Add', 'awed.onePerLine': 'One reference per line:', 'awed.replacesList': '(comma/semicolon/tab). Replaces the whole list.', 'awed.import2': 'Import', 'awed.search': 'Search…', 'awed.searching': 'Searching…', 'awed.tooManyItems': 'Too many items ({total}). Please refine search (type 2+ characters).', 'awed.noReferences': 'No references.', 'awed.selectReference': 'Select a reference, or Add / import a list.', 'awed.group': 'Group', 'awed.subgroup': 'Subgroup', 'awed.perRefRegex': 'optional per-reference regex', 'awed.grid': 'Grid', 'awed.saveReference': 'Save reference',
+  'awp.awards': 'Awards', 'awp.editAwards': 'Edit awards', 'awp.rescanTitle': 'Re-pull the logbook and recompute (picks up new LoTW/QRZ confirmations)', 'awp.rescan': 'Rescan', 'awp.selectAward': 'Select an award…', 'awp.of': 'of', 'awp.computing': 'Computing…', 'awp.noData': 'No data', 'awp.worked': 'worked', 'awp.confirmed': 'confirmed', 'awp.validated': 'validated', 'awp.ofConfirmed': 'of {total} · {pct}% confirmed', 'awp.byBand': 'By band (confirmed / worked)', 'awp.filterReferences': 'Filter references…', 'awp.filterAll': 'All', 'awp.filterWkd': 'Wkd', 'awp.filterNotWkd': 'Not wkd', 'awp.filterWkdNotCfmd': 'Wkd not cfmd', 'awp.modePhone': 'Phone', 'awp.modeDigital': 'Digital', 'awp.refs': 'refs', 'awp.missingRefsTitle': "Contacts in this award's scope (right DXCC/band/mode) but with no reference — they're excluded until you add it", 'awp.missingRefs': 'Missing refs', 'awp.gridView': 'Grid view', 'awp.listView': 'List view', 'awp.statistics': 'Statistics', 'awp.statistic': 'Statistic', 'awp.total': 'Total', 'awp.grand': 'Grand', 'awp.ref': 'Ref', 'awp.description': 'Description', 'awp.cellTitle': '{ref} · {band} — click to view QSOs', 'awp.name': 'Name', 'awp.groupCol': 'Group', 'awp.status': 'Status', 'awp.bands': 'Bands', 'awp.missing': '— missing', 'awp.contactsMissingRef': 'contacts missing a reference', 'awp.recomputeTitle': "Recompute now — contacts you've fixed drop off the list", 'awp.refresh': 'Refresh', 'awp.missingScopeHelp': "In this award's scope (DXCC / band / mode / dates) but no reference was found — so they don't count yet. Sort by a column, tick the matching contacts, then assign the reference below.", 'awp.orClickRow': '(Or click a row to open the QSO.)', 'awp.selectedArrow': '{n} selected →', 'awp.chooseReference': 'Choose a reference to assign…', 'awp.assignToSelected': 'Assign to {n} selected', 'awp.scanning': 'Scanning…', 'awp.noGaps': 'No gaps found. (Missing-reference detection applies to awards scoped to a DXCC entity — e.g. DDFM, WAS, RAC, WAJA.)', 'awp.dateUtc': 'Date (UTC)', 'awp.callsign': 'Callsign', 'awp.band': 'Band', 'awp.mode': 'Mode', 'awp.country': 'Country', 'awp.qthNote': 'QTH / Note', 'awp.stations': 'stations', 'awp.contactsWithoutRef': 'contacts without a reference', 'awp.assignedMsg': 'Assigned {code}@{ref} to {n} contact(s).', 'awp.loading': 'Loading…', 'awp.noQsos': 'No QSOs.',
+  'awed.addCountry': 'Add country…', 'awed.exportedTo': 'Awards exported to:\n{path}', 'awed.importedMsg': 'Imported {awards} award(s) and {references} reference(s).', 'awed.awardManagement': 'Award management', 'awed.searchAwards': 'Search awards…', 'awed.newAward': 'New award', 'awed.clickToDismiss': 'Click to dismiss', 'awed.selectOrCreate': 'Select or create an award.', 'awed.tabInfo': 'Award info', 'awed.tabType': 'Award type', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'References', 'awed.awardName': 'Award name', 'awed.valid': 'Valid', 'awed.deleteAward': 'Delete award', 'awed.description': 'Description', 'awed.awardUrl': 'Award URL', 'awed.refDisplay': 'Column shows', 'awed.refDisplayRef': 'Reference', 'awed.refDisplayName': 'Description / name', 'awed.refDisplayBoth': 'Both (ref — name)', 'awed.referenceUrl': 'Reference URL', 'awed.validFrom': 'Valid from', 'awed.validTo': 'Valid to', 'awed.dxccFilter': 'DXCC filter', 'awed.validBands': 'Valid bands (empty = all)', 'awed.emission': 'Emission (empty = all)', 'awed.validModes': 'Valid modes (empty = all)', 'awed.awardType': 'Award type', 'awed.dynamicRefs': 'Dynamic references (not predefined — any value counts, like POTA)', 'awed.qsoParams': 'QSO parameters (used by QSOFIELDS / REFERENCE types)', 'awed.searchInField': 'Search in field', 'awed.matchBy': 'Match by', 'awed.exactMatch': 'Exact match (else search reference inside the field)', 'awed.oneRef': 'One reference per QSO', 'awed.oneRefHint': 'When several references match the same contact, assign none and list it under missing references. For awards where two entries can share a description — two DOKs called Gießen — picking one at random would write the wrong one into the log.', 'awed.patternRegex': 'Pattern (regex)', 'awed.patternPlaceholder': 'group 1 = reference (for match-by pattern / dynamic)', 'awed.leadingString': 'Leading string', 'awed.trailingString': 'Trailing string', 'awed.additionalSearches': 'Fallback searches', 'awed.orAlsoMatch': '— tried in order, only if nothing matched yet; first hit wins', 'awed.addOr': 'Add OR', 'awed.orSearchIn': 'OR — search in', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Remove this OR search', 'awed.orPatternPlaceholder': 'regex — group 1 = reference (e.g. \\b(\\d{2})\\d{3}\\b for postal → dept)', 'awed.prefixPlaceholder': 'prefix (D)', 'awed.prefixTitle': 'Prepended to each found reference, e.g. 74 → D74', 'awed.confirmationLabel': 'Confirmation (worked → confirmed)', 'awed.validationLabel': 'Validation (confirmed → validated)', 'awed.resetDefaults': 'Reset to defaults', 'awed.exportTitle': 'Export all award definitions + reference lists to a JSON backup', 'awed.export': 'Export…', 'awed.importTitle': 'Import an award bundle (definitions + reference lists)', 'awed.import': 'Import…', 'awed.cancel': 'Cancel', 'awed.save': 'Save', 'awed.populatedMsg': 'Populated {n} built-in references.', 'awed.newRefCodePrompt': 'New reference code:', 'awed.importedRefsMsg': 'Imported {n} references.', 'awed.referenceCount': 'Reference count:', 'awed.applyPreset': 'Apply preset…', 'awed.pasteCsv': 'Paste / CSV', 'awed.populateBuiltinTitle': 'Replace with the shipped built-in list (DXCC entities, French departments, …)', 'awed.populateBuiltin': 'Populate built-in', 'awed.updateOnline': 'Update online', 'awed.add': 'Add', 'awed.onePerLine': 'One reference per line:', 'awed.replacesList': '(comma/semicolon/tab). Replaces the whole list.', 'awed.import2': 'Import', 'awed.search': 'Search…', 'awed.searching': 'Searching…', 'awed.tooManyItems': 'Too many items ({total}). Please refine search (type 2+ characters).', 'awed.noReferences': 'No references.', 'awed.selectReference': 'Select a reference, or Add / import a list.', 'awed.group': 'Group', 'awed.subgroup': 'Subgroup', 'awed.perRefRegex': 'optional per-reference regex', 'awed.grid': 'Grid', 'awed.saveReference': 'Save reference',
   'awed.updateAvailable': 'An updated version of this award is available', 'awed.updateOverwrites': 'You have modified this award, so the update was not applied. Taking it replaces your definition and reference list.', 'awed.updateApply': 'Update', 'awed.updateKeepMine': 'Keep mine',
-  'awed.tabTest': 'Test', 'awed.testCallsign': 'Test against callsign', 'awed.testRun': 'Test', 'awed.testSavedOnly': 'Tests the SAVED award — save your changes first.', 'awed.testNoMatch': 'no match', 'awed.testOutOfScope': 'QSO out of scope — no rule was run.', 'awed.testSkipped': 'not run: an earlier rule already matched', 'awed.testFieldValue': 'Field', 'awed.testEmptyField': 'empty', 'awed.testNoCandidate': 'produced no candidate', 'awed.testManual': 'Manual override', 'awed.testSameAs': '+{n} other QSO(s), same result',
+  'awed.tabTest': 'Test', 'awed.testCallsign': 'Test against callsign', 'awed.testRun': 'Test', 'awed.testSavedOnly': 'Tests the SAVED award — save your changes first.', 'awed.testNoMatch': 'no match', 'awed.testOutOfScope': 'QSO out of scope — no rule was run.', 'awed.testSkipped': 'not run: an earlier rule already matched', 'awed.testFieldValue': 'Field', 'awed.testEmptyField': 'empty', 'awed.testNoCandidate': 'produced no candidate', 'awed.testManual': 'Manual override', 'awed.testAmbiguous': 'Ambiguous', 'awed.testAmbiguousHint': '— none kept, this award allows one reference per QSO. Assign the right one by hand.', 'awed.testSameAs': '+{n} other QSO(s), same result',
   'awed.exportOne': 'Share {code}',
   'awed.onlyHere': 'local',
   'awed.onlyHereTip': 'Yours — not shipped with OpsLog. Its JSON is kept up to date in the awards folder; send that file to share it.',
@@ -398,7 +404,7 @@ const en: Dict = {
   'awed.importReplace': 'Replace mine',
   'awed.importCopy': 'Import as {code}-2',
   // QSO modals (context menu / bulk edit / QSL manager / QSO edit)
-  'qctx.selected': '{n} QSO(s) selected', 'qctx.fixCountry': 'Fix country & zones from cty.dat', 'qctx.updateQrz': 'Update from QRZ.com', 'qctx.updateClublog': 'Update from ClubLog (exceptions)', 'qctx.sendQslEmail': 'Send OpsLog QSL by e-mail', 'qctx.sendRecording': 'Send recording by e-mail', 'qctx.bulkEdit': 'Bulk edit field… ({n})', 'qctx.exportSelectedAdif': 'Export selected to ADIF ({n})', 'qctx.exportSelectedFields': 'Export selected — choose fields… ({n})', 'qctx.exportFilteredAdif': 'Export filtered view to ADIF (no limit)', 'qctx.exportSelectedCabrillo': 'Export selected to Cabrillo ({n})', 'qctx.exportFilteredCabrillo': 'Export filtered view to Cabrillo (no limit)', 'qctx.sendTo': 'Send to {name}', 'qctx.delete': 'Delete {n} QSO(s)…',
+  'qctx.selected': '{n} QSO(s) selected', 'qctx.fixCountry': 'Fix country & zones from cty.dat', 'qctx.updateQrz': 'Update from the callsign databases', 'qctx.updateClublog': 'Update from ClubLog (exceptions)', 'qctx.sendQslEmail': 'Send OpsLog QSL by e-mail', 'qctx.sendRecording': 'Send recording by e-mail', 'qctx.bulkEdit': 'Bulk edit field… ({n})', 'qctx.exportSelectedAdif': 'Export selected to ADIF ({n})', 'qctx.exportSelectedFields': 'Export selected — choose fields… ({n})', 'qctx.exportFilteredAdif': 'Export filtered view to ADIF (no limit)', 'qctx.exportSelectedCabrillo': 'Export selected to Cabrillo ({n})', 'qctx.exportFilteredCabrillo': 'Export filtered view to Cabrillo (no limit)', 'qctx.sendTo': 'Send to {name}', 'qctx.delete': 'Delete {n} QSO(s)…',
   'exp.title': 'Export to ADIF', 'exp.desc': 'Choose which fields to write.',
   'exp.stdTitle': 'Standard ADIF fields', 'exp.stdDesc': 'Official ADIF 3.1.7 fields only — best for uploading to other logbooks (LoTW, QRZ, Club Log…).',
   'exp.allTitle': 'All OpsLog fields', 'exp.allDesc': 'Everything, including OpsLog-specific and app-defined tags — a full backup you can re-import here.',
@@ -424,7 +430,7 @@ const en: Dict = {
   'aud.txOn': 'TRANSMITTING — mic → To Radio, PTT keyed. Click to stop.', 'aud.txHint': 'Live mic → rig with PTT (USB now; network TX later).',
   'aud.recorder': 'QSO recorder', 'aud.recordEvery': 'Record every QSO to an audio file (From Radio + your mic)', 'aud.recFolder': 'Recordings folder', 'aud.browse': 'Browse…',
   'aud.preroll': 'Pre-roll (seconds)', 'aud.format': 'File format', 'aud.wav': 'WAV (lossless, larger)', 'aud.mp3': 'MP3 (compressed, small)',
-  'aud.fromLevel': 'From Radio level', 'aud.txLevel': 'Voice keyer level', 'aud.txLevelHint': 'Level of the recorded messages sent to the radio. Raise it if your voice keyer is much quieter than your microphone; Play previews at this same level. If the radio transmits almost nothing, its modulation source is still the front microphone: on an FTDX10 set MENU → SSB MOD SOURCE to REAR (the USB input).', 'aud.micLevel': 'Mic level', 'aud.levelHint': 'If your voice is louder than the station, lower Mic level.',
+  'aud.fromLevel': 'From Radio level', 'aud.txLevel': 'Voice keyer level', 'aud.txLevelHint': 'Level of the recorded messages sent to the radio. Raise it if your voice keyer is much quieter than your microphone; Play previews at this same level. If the radio transmits almost nothing, its modulation source is still the front microphone: on an FTDX10 set MENU → SSB MOD SOURCE to REAR (the USB input).', 'aud.micLevel': 'Mic level', 'aud.qsoPlayLevel': 'QSO playback level', 'aud.levelHint': 'If your voice is louder than the station, lower Mic level.',
   'aud.autoSend': 'Auto-send the recording to the station by e-mail when I log a QSO',
   'aud.dvkTitle': 'Voice keyer messages (F1–F6)', 'aud.pttMethod': 'PTT method', 'aud.pttNone': 'None (VOX)', 'aud.pttCat': 'CAT (the radio link)', 'aud.pttRts': 'Serial RTS', 'aud.pttDtr': 'Serial DTR',
   'aud.testPtt': 'Test PTT', 'aud.pttPort': 'PTT COM port', 'aud.pickPort': 'Pick a COM port', 'aud.selectPort': '— select —', 'aud.refresh': 'Refresh',
@@ -464,7 +470,7 @@ const fr: Dict = {
   'dup.selectExtras': 'Tout sélectionner sauf le premier', 'dup.deselectAll': 'Tout désélectionner', 'dup.deleteSel': 'Supprimer {n} sélectionné(s)', 'dup.deleteConfirm': 'Supprimer {n} QSO ? Action irréversible.', 'dup.deleted': '{n} doublon(s) supprimé(s)', 'dup.keep': 'le plus ancien', 'dup.close': 'Fermer',
   'dup.colDate': 'Date / heure (UTC)', 'dup.colFreq': 'Fréq', 'dup.colRst': 'RST e/r', 'dup.colName': 'Nom',
   'profileScope.saved': 'Enregistré pour le profil', 'profileScope.switch': "— change de profil pour éditer une autre identité.",
-  'tab.main': 'Principal', 'tab.recent': 'QSO récents', 'tab.cluster': 'Cluster', 'tab.worked': 'Déjà contacté',
+  'tab.main': 'Principal', 'main.splitTip': 'Faites glisser pour redimensionner les volets — double-clic pour les égaliser', 'tab.recent': 'QSO récents', 'tab.cluster': 'Cluster', 'tab.worked': 'Déjà contacté',
   'tab.awards': 'Diplômes', 'tab.bandmap': 'Carte de bande', 'tab.contest': 'Contest', 'tab.net': 'NET',
   'field.callsign': 'Indicatif', 'field.name': 'Nom', 'field.qth': 'QTH', 'field.grid': 'Locator',
   'field.band': 'Bande', 'field.mode': 'Mode', 'field.country': 'Pays', 'field.comment': 'Commentaire',
@@ -475,7 +481,7 @@ const fr: Dict = {
   'lang.choose': 'Choisissez votre langue', 'lang.chooseHint': 'Modifiable plus tard dans Réglages → Général.',
   'lang.english': 'English', 'lang.french': 'Français', 'whatsnew.title': 'Nouveautés', 'whatsnew.close': 'Compris', 'whatsnew.none': 'Aucune nouveauté pour cette version pour le moment.',
   'upd.checking': 'Recherche de mises à jour…', 'upd.upToDate': 'Vous êtes à jour',
-  'settings.language': 'Langue', 'settings.languageHint': "Langue de l'interface.",
+  'settings.language': 'Langue', 'gen.dateFormat': 'Affichage des dates', 'gen.dateStandard': 'Standard', 'gen.dateFR': 'Fran\u00e7ais', 'gen.dateUS': 'US', 'settings.languageHint': "Langue de l'interface.",
   'stats.tab': 'Statistiques', 'stats.title': 'Statistiques du journal', 'stats.loading': 'Analyse du journal…',
   'stats.noData': 'Aucune donnée', 'stats.charts': 'Graphiques', 'stats.table': 'Tableau', 'stats.refresh': 'Rafraîchir',
   'stats.qsos': 'QSO', 'stats.uniqueCalls': 'Indicatifs uniques', 'stats.entities': 'Entités',
@@ -546,8 +552,8 @@ const fr: Dict = {
   'imp.ctyDesc': "Recalcule Pays, DXCC & zones CQ/ITU depuis cty.dat, en écrasant le fichier — corrige ce que les logiciels de contest exportent mal (ex. RG2Y en Russie asiatique au lieu d'européenne). Les exceptions DXpédition de ClubLog s'appliquent par-dessus selon la date du QSO (ex. TO974REF → Réunion, TO2A 2012 → Guyane française) dès que les données ClubLog sont téléchargées. Tout le reste de l'ADIF est conservé tel quel. Astuce : utilise Mettre à jour les doublons pour re-corriger des QSO déjà dans le log.",
   'imp.stationTitle': 'Remplir mes champs station depuis mon profil',
   'imp.stationDesc': "Complète les champs MY_* vides (locator, rig, antenne, adresse, ville, état, comté, réf. SOTA/POTA, puissance TX…) plus Opérateur et Indicatif propriétaire depuis le profil actif. Les valeurs existantes sont conservées. Seul STATION_CALLSIGN n'est jamais touché pour ne pas re-router un log multi-indicatifs. Elle applique AUSSI tes statuts de confirmation par défaut (QSL papier, LoTW, eQSL, Club Log, HRDLog, QRZ.com envoyé et reçu) sur ceux que le fichier laisse vides — un log WSJT-X n'en contient pratiquement aucun. À activer quand tu importes ton propre log.",
-  'imp.cancel': 'Annuler', 'imp.mapAdd': 'Le fichier met un champ au mauvais endroit\u2026', 'imp.mapTitle': 'D\u00e9placer des champs \u00e0 l\u2019import', 'imp.mapDesc': 'Les logiciels de concours rangent l\u2019\u00e9change l\u00e0 o\u00f9 leur module le garde. Le contest IOTA de la RSGB exporte la r\u00e9f\u00e9rence d\u2019\u00eele dans STATE \u2014 import\u00e9e telle quelle elle devient un \u00e9tat am\u00e9ricain et le dipl\u00f4me IOTA reste vide. La destination n\u2019est remplie que l\u00e0 o\u00f9 le fichier l\u2019a laiss\u00e9e vide.', 'imp.mapMore': 'Ajouter une ligne', 'imp.import': 'Importer',
-  'imp.progressTitle': 'Import ADIF en cours…',
+  'imp.cancel': 'Annuler', 'rec.manualStart': 'Enregistrer ce contact. L\u2019enregistrement automatique est d\u00e9sactiv\u00e9 : la capture commence maintenant, sans les secondes qui pr\u00e9c\u00e8dent.', 'rec.stop': 'Arr\u00eater l\u2019enregistrement. L\u2019audio est conserv\u00e9 et sera enregistr\u00e9 avec le QSO \u2014 arr\u00eatez-le pour le repasser \u00e0 la station travaill\u00e9e.', 'rec.resume': 'Reprendre l\u2019enregistrement, \u00e0 la suite de ce qui est d\u00e9j\u00e0 captur\u00e9.', 'rec.playOnAir': '\u00c9METTRE l\u2019enregistrement vers la station travaill\u00e9e : passe la radio en \u00e9mission et l\u2019envoie comme un message du manipulateur vocal.', 'rec.stopPlaying': 'Arrêter l’émission de l’enregistrement', 'rec.manualFailed': 'L\u2019enregistrement n\u2019a pas pu d\u00e9marrer \u2014 v\u00e9rifiez les p\u00e9riph\u00e9riques audio dans les R\u00e9glages.', 'imp.mapAdd': 'Le fichier met un champ au mauvais endroit\u2026', 'imp.mapTitle': 'D\u00e9placer des champs \u00e0 l\u2019import', 'imp.mapDesc': 'Les logiciels de concours rangent l\u2019\u00e9change l\u00e0 o\u00f9 leur module le garde. Le contest IOTA de la RSGB exporte la r\u00e9f\u00e9rence d\u2019\u00eele dans STATE \u2014 import\u00e9e telle quelle elle devient un \u00e9tat am\u00e9ricain et le dipl\u00f4me IOTA reste vide. La destination n\u2019est remplie que l\u00e0 o\u00f9 le fichier l\u2019a laiss\u00e9e vide.', 'imp.mapMore': 'Ajouter une ligne', 'imp.import': 'Importer',
+  'imp.progressTitle': 'Import ADIF en cours…', 'bulk.progressTitle': 'Mise \u00e0 jour des QSO s\u00e9lectionn\u00e9s\u2026',
   'imp.progressCount': '{done} / {tot} enregistrements · {pct}%', 'imp.progressCountOnly': '{done} enregistrements…',
   'imp.complete': 'Import terminé.',
   'imp.imported': '{n} importé(s)', 'imp.updated': '{n} mis à jour', 'imp.duplicates': '{n} doublon(s)', 'imp.skipped': '{n} ignoré(s)', 'imp.total': '{n} au total',
@@ -678,7 +684,7 @@ const fr: Dict = {
   'rot.enable': 'Activer le contrôle du rotator', 'rot.testOkRG': 'Connecté — le Rotator Genius a accepté la commande (rotation vers 0°).',  'rot.type': 'Type de rotator', 'rot.rotatorNum': 'Rotator n°', 'rot.rgHint': 'Parle directement à un Rotator Genius 4O3A en TCP (port 9006 par défaut) — sans PstRotator. Le n° choisit lequel des deux rotators du boîtier piloter.', 'rot.arcoHint': "Parle directement à tout contrôleur réglé sur Yaesu GS-232A — sans PstRotator. microHAM ARCO : régler Config → LAN → CONTROL PROTOCOL (ou USB CONTROL PROTOCOL) sur « Yaesu GS-232A » ; en USB la vitesse est sans importance. ERC (Easy Rotor Control, ERC Mini compris) : son émulation DOIT être réglée sur GS-232 — un ERC laissé en Hy-Gain DCU-1 parle un autre jeu de commandes et ne répondra pas — puis choisir son port COM et la même vitesse que dans la configuration de l'ERC.", 'rot.hint': "OpsLog envoie des commandes UDP à PstRotator. Active l'écouteur UDP de PstRotator (Setup → Communication → UDP) avant de tester.",
   'extsvc.hint': "Envoie les QSO enregistrés vers des carnets en ligne. Chaque service upload automatiquement à chaque nouveau QSO si activé ; le délai est propre à chaque service (immédiat, ou 1–2 min pour corriger un QSO mal saisi avant).",
   'hw.motorTxInhibit': "Inhiber la transmission pendant que l'antenne bouge", 'hw.motorTxInhibitHint': "Empêche le FlexRadio d'émettre pendant que les éléments bougent (nécessite le FlexRadio en API + cette antenne activée). Sans effet avec les autres radios.", 'hw.motorAntenna': 'Antenne motorisée', 'hw.motorEnable': "Activer le contrôle de l'antenne", 'hw.motorType': "Type d'antenne", 'hw.motorTransport': 'Connexion', 'hw.motorTcp': 'Réseau (TCP)', 'hw.motorSerial': 'Série (COM)', 'hw.motorCom': 'Port série', 'hw.motorBaud': 'Débit', 'hw.steppirHint': "Les contrôleurs SteppIR sont en RS-232 série (port DB9 « DATA OUT »). Série = un adaptateur USB↔RS-232 (FTDI), vu comme un port COM. Réseau = un pont série-Ethernet (comme pour l'Ultrabeam).", 'hw.steppirRange': 'Plage accordable', 'hw.steppirRangeHint': "La couverture en fréquence de la SteppIR. Sur une bande hors de cette plage (p. ex. 30 m avec une SteppIR 20 m-6 m), OpsLog n'essaie pas d'accorder l'antenne et n'inhibe pas l'émission. Défaut 13-54 MHz (20 m-6 m) ; abaisse la borne basse (p. ex. 6) pour une SteppIR équipée 40 m.", 'hw.ultrabeam': 'Antenne (Ultrabeam)', 'hw.audioVoice': 'Périphériques audio & manipulateur vocal',
-  'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig (tout poste, COM Windows)', 'cat.optFlex': 'FlexRadio / SmartSDR (natif)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un backend CAT natif occupe le port série de la radio, aucun autre logiciel ne peut donc y accéder. Ceci permet à WSJT-X, JTDX, MSHV ou Log4OM de dialoguer avec la radio À TRAVERS OpsLog : dans l'autre logiciel, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532. Fonctionne avec tous les backends, pas seulement les natifs.", 'cat.sharePort': 'Port de partage', 'cat.optXiegu': 'Xiegu (CI-V natif)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.optYaesu': 'Yaesu (CAT natif)', 'cat.optKenwood': 'Kenwood (natif)', 'cat.civTrace': 'Journaliser le protocole CI-V', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CI-V \u00e9chang\u00e9e avec la radio, en hexad\u00e9cimal. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.optIcom': 'Icom CI-V (USB série)', 'cat.optIcomNet': 'Icom CI-V (réseau / remote)', 'cat.optTci': 'TCI (Expert Electronics / SunSDR)',
+  'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un backend CAT natif occupe le port série de la radio, aucun autre logiciel ne peut donc y accéder. Ceci permet à WSJT-X, JTDX, MSHV ou Log4OM de dialoguer avec la radio À TRAVERS OpsLog : dans l'autre logiciel, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532. Fonctionne avec tous les backends, pas seulement les natifs.", 'cat.sharePort': 'Port de partage', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.xieguPTTLine': 'Passage en \u00e9mission', 'cat.xieguPTTCiv': 'Commande CI-V', 'cat.xieguPTTHint': 'Un G90 ne passe pas en \u00e9mission sur la commande CI-V : les interfaces comme le DE-19 le pilotent par RTS ou DTR. Choisissez la ligne de la v\u00f4tre \u2014 c\u2019est aussi ce qui permet \u00e0 WSJT-X d\u2019\u00e9mettre via le partage CAT.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.kenwoodHostHint': 'Un pont s\u00e9rie-r\u00e9seau \u2014 ser2net, un bo\u00eetier Ethernet-s\u00e9rie, un Raspberry Pi pr\u00e8s de la radio. S\u2019il est rempli, il est utilis\u00e9 \u00c0 LA PLACE du port COM ci-dessus. Il ne s\u2019agit pas de la prise RJ45 de la radio, qui parle le protocole KNS de Kenwood et n\u2019est pas prise en charge.', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.lowerLines': 'Abaisser les lignes DTR et RTS à la connexion', 'cat.lowerLinesHint': 'Windows les lève à l’ouverture du port, et certaines interfaces lisent l’une ou l’autre comme PTT — la radio émet alors tant qu’OpsLog tourne. À cocher seulement dans ce cas : d’autres interfaces ont besoin de RTS haut pour émettre, et l’abaisser rend la radio muette.', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9',
   'cat.icomNetHost': 'IP / nom d\'hôte du poste', 'cat.icomNetUser': 'Utilisateur réseau (ID)', 'cat.icomNetPass': 'Mot de passe réseau',
   'cat.icomNetHint': "Se connecte directement au serveur LAN intégré du poste — sans RS-BA1 ni Remote Utility (ferme-les d'abord). Utilise l'ID/mot de passe Network User1 configurés dans le menu Network du poste. Un poste en veille est allumé automatiquement.",
   'cat.icomNetAudio': 'Diffuser l’audio RX par le réseau (expérimental)',
@@ -698,7 +704,7 @@ const fr: Dict = {
   'es.usernameCall': 'Identifiant (indicatif)', 'es.eqslUserPh': 'ton identifiant eQSL.cc (indicatif)', 'es.eqslPwPh': 'mot de passe du compte eQSL.cc', 'es.qthNick': 'Surnom QTH', 'es.qthNickPh': 'optionnel — requis seulement si ton compte eQSL a plusieurs QTH', 'es.eqslHint': "Le surnom QTH indique à eQSL sous quel profil de lieu classer le QSO. Laisse vide si tu n'en as qu'un.",
   'es.lotwUser': 'Utilisateur LoTW', 'es.lotwUserPh': 'identifiant du site LoTW (pour télécharger les confirmations)', 'es.lotwPw': 'Mot de passe LoTW', 'es.lotwPwPh': 'mot de passe du site LoTW', 'es.tqslPath': 'Chemin TQSL', 'es.stationLoc': 'Station location', 'es.pickLoc': '— choisir une Station Location TQSL —', 'es.noLoc': 'Aucune Station Location TQSL trouvée', 'es.reloadLoc': 'Recharger les locations depuis TQSL', 'es.lotwForcePh': "p. ex. F4BPO/P — laisse vide pour utiliser l'indicatif du QSO", 'es.lotwForceHint': "Remplace STATION_CALLSIGN à la signature pour qu'un même certificat signe plusieurs indicatifs (F4BPO, F4BPO/P, TM2Q). Choisis la Station Location correspondante ci-dessus.", 'es.keyPw': 'Mot de passe de la clé', 'es.keyPwPh': 'seulement si la clé de ton certificat a un mot de passe', 'es.considerUnsent': 'Considérer comme non envoyé', 'es.flagN': 'Non (N)', 'es.flagR': 'Demandé (R)', 'es.lotwUnsentHint': "À la fermeture, chaque QSO dont le statut LoTW « envoyé » est l'un de ceux-ci est signé et envoyé dans un même lot TQSL — y compris les QSO importés depuis un ADIF. Les QSO envoyés passent à Y et ne sont pas renvoyés. Doit inclure ton statut « envoyé » par défaut défini dans Confirmations.", 'es.lotwAutoClose': "Envoi automatique à la fermeture de l'application", 'es.lotwWriteLog': 'Écrire le journal de diagnostic TQSL (-t)',
   'es.potaHint': "Met à jour tes QSO avec la référence du parc depuis ton carnet chasseur pota.app. Colle ton jeton de session : connecte-toi sur pota.app, ouvre les DevTools du navigateur → onglet Network, clique sur une requête api.pota.app, et copie toute la valeur de l'en-tête Authorization. Le jeton expire au bout d'un moment — recopie-le si la synchro échoue.", 'es.sessionToken': 'Jeton de session', 'es.saving': 'Enregistrement…', 'es.saveToken': 'Enregistrer le jeton', 'es.potaThen': "Puis lance la synchro depuis l'onglet Gestionnaire QSL → service POTA hunter log (tu peux y voir et corriger les QSO non appariés).",
-  'es.soon': 'bientôt', 'es.comingSoon': '{name} — bientôt', 'es.notWired': "Ce service externe n'est pas encore branché.",
+  'es.soon': 'bientôt', 'es.deleteRemote': 'Supprimer aussi sur QRZ.com et Club Log', 'es.deleteRemoteHint': 'Quand vous supprimez un QSO ici, le retirer aussi de ces services. QRZ.com ne peut supprimer que les enregistrements envoy\u00e9s par OpsLog \u2014 les plus anciens doivent \u00eatre retir\u00e9s sur le site.', 'es.comingSoon': '{name} — bientôt', 'es.notWired': "Ce service externe n'est pas encore branché.",
   'lotw.usersTitle': 'Liste des utilisateurs LoTW', 'lotw.usersHint': "Télécharge la liste publique ARRL des utilisateurs LoTW + leur date de dernier upload, pour afficher un badge LoTW coloré à côté d'un indicatif (vert < 1 semaine · ambre 1–4 semaines · rouge > 30 j).", 'lotw.usersDownload': 'Télécharger la liste LoTW', 'lotw.usersDownloading': 'Téléchargement…', 'lotw.usersLoaded': '{n} utilisateurs chargés · maj {date}', 'lotw.usersNone': 'Pas encore téléchargée — le badge reste caché tant que ce n’est pas fait.',
   'scp.title': 'Super Check Partial', 'scp.partial': 'Partiel', 'scp.close': 'Fermer', 'scp.fill': 'Remplir {call}', 'scp.none': 'Aucun', 'scp.typeMore': 'Tape un indicatif…', 'scp.noList': 'Télécharge la liste SCP dans Réglages → Général.', 'scp.enable': 'Assistant indicatifs Super Check Partial / N+1', 'scp.settingsHint': "Télécharge la liste communautaire MASTER.SCP et affiche un widget en 2 colonnes pendant que tu tapes un indicatif : Partiel (indicatifs connus contenant ce que tu tapes) et N+1 (indicatifs à une lettre près) — pour repérer et corriger un call busté.", 'scp.download': 'Mettre à jour la liste SCP', 'scp.downloading': 'Téléchargement…', 'scp.loaded': '{n} indicatifs chargés · maj {date}', 'scp.notLoaded': 'Pas encore téléchargée.',
   'hw.connecting': 'Connexion…', 'hw.testConn': 'Tester la connexion', 'hw.sending': 'Envoi…', 'hw.testRotator': 'Tester (pointer vers 0°)',
@@ -747,6 +753,12 @@ const fr: Dict = {
   'wkp.autoCallHint': "Clique une macro CQ (dont le texte contient CQ) pour la réémettre en boucle — message, pause, répétition — jusqu'à envoyer une autre macro (ex. un report), appuyer sur Stop ou ESC. Les macros non-CQ ne sont émises qu'une fois.", 'wkp.autoCall': 'Appel auto', 'wkp.gap': 'pause', 'wkp.gapHint': 'Secondes à attendre après le message avant de réémettre', 'wkp.loopHint': 'clique une macro CQ pour la boucler', 'wkp.macroN': 'Macro {n}',
   'dvkp.voiceKeyer': 'Manipulateur vocal', 'dvkp.autoCq': 'Auto CQ', 'dvkp.autoCqHint': 'Répète un message libellé CQ à intervalle régulier jusqu\'à l\'arrêt ou la lecture d\'un autre slot', 'dvkp.gap': 'Intervalle', 'dvkp.notPhone': 'Le manipulateur vocal n\'émet qu\'en mode phonie (SSB/AM/FM)', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Désactiver le manipulateur vocal', 'dvkp.noMsgPre': 'Aucun message enregistré. Ouvre', 'dvkp.settingsPath': 'Réglages → Périphériques audio & manipulateur vocal', 'dvkp.noMsgPost': 'pour enregistrer F1–F6.', 'dvkp.transmit': 'Émettre F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — vide', 'dvkp.message': 'message',
   'agp.portDeselect': 'Port {letter} — clic pour désélectionner', 'agp.portSelect': 'Sélectionner sur le port {letter}', 'agp.online': 'en ligne', 'agp.offline': 'hors ligne', 'agp.close': 'Fermer', 'agp.connecting': 'Connexion…', 'agp.noAntennas': 'Aucune antenne configurée.', 'agp.filterOnHint': 'Antennes du {band} uniquement — clic pour afficher toutes les bandes', 'agp.filterOffHint': 'Toutes les antennes affichées — clic pour n’afficher que la bande courante',
+  'ampw.title': 'Amplificateur', 'ampw.all': 'Tous les amplis', 'ampw.pick': 'Ampli affiché par le widget',
+  'ampw.showHint': 'Amplificateur · cliquer pour afficher', 'ampw.hideHint': 'Amplificateur — affiché · cliquer pour masquer',
+  'ampw.close': 'Fermer', 'ampw.offline': 'hors ligne', 'ampw.none': 'Aucun amplificateur configuré',
+  'ampw.operate': 'Operate', 'ampw.standby': 'Standby', 'ampw.on': 'ON', 'ampw.off': 'OFF',
+  'ampw.lvlL': 'Low', 'ampw.lvlM': 'Mid', 'ampw.lvlH': 'High',
+  'ampw.pwr': 'Watts', 'ampw.swr': 'ROS', 'ampw.temp': 'Temp', 'ampw.id': 'Id (A)', 'ampw.fan': 'Mode ventil.',
   'tgp.online': 'en ligne', 'tgp.offline': 'hors ligne', 'tgp.close': 'Fermer', 'tgp.connecting': 'Connexion…', 'tgp.swr': 'ROS', 'tgp.power': 'Puiss. directe', 'tgp.tune': 'Accord', 'tgp.tuning': 'Accord…', 'tgp.tuneHint': "Lancer un cycle d'accord automatique sur le canal actif — passe la radio en porteuse pour que le coupleur mesure le ROS", 'tgp.bypass': 'Bypass', 'tgp.bypassHint': "Basculer le bypass global — antenne en direct, coupleur hors ligne", 'tgp.operate': 'Operate', 'tgp.standby': 'Standby', 'tgp.operateHint': 'Basculer Operate / Standby',
   'tgp.title': 'Tuner Genius', 'tgp.chActive': 'Canal {letter} — actif', 'tgp.chSelect': 'Activer le canal {letter}', 'tgp.chActiveTag': 'actif', 'tgp.ant': 'Ant', 'tgp.bypassed': 'Bypass', 'tgp.inLine': 'En ligne',
   'flxp.ritHint': "RIT — décale uniquement ta fréquence de RÉCEPTION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.", 'flxp.xitHint': "XIT — décale uniquement ta fréquence d'ÉMISSION. Molette, ± ou flèches pour ajuster (Ctrl = 100 Hz). Le décalage est conservé quand tu l'éteins.",
@@ -760,13 +772,13 @@ const fr: Dict = {
   'ncp.newNetPrompt': 'Nom du nouveau NET :', 'ncp.renamePrompt': 'Renommer le NET :', 'ncp.deleteConfirm': 'Supprimer le NET « {name} » et son répertoire ? Cette action est irréversible.', 'ncp.closeConfirm': "{n} station(s) encore en l'air seront retirées SANS être enregistrées. Fermer quand même ?", 'ncp.removeConfirm': 'Retirer {n} station(s) du répertoire de ce NET ?', 'ncp.colCallsign': 'Indicatif', 'ncp.colName': 'Nom', 'ncp.colTimeOn': 'Heure début', 'ncp.colBand': 'Bande', 'ncp.colMode': 'Mode', 'ncp.colComment': 'Commentaire', 'ncp.colCountry': 'Pays', 'ncp.colDate': 'Date', 'ncp.workedBefore': 'Déjà contacté', 'ncp.wbHint': 'Cliquer une station (on air ou roster) pour voir les QSO précédents', 'ncp.wbNone': 'Aucun QSO précédent avec', 'ncp.wbFirst': 'premier', 'ncp.wbLast': 'dernier', 'ncp.wbResize': 'Glisser pour redimensionner', 'ncp.newNet': 'Nouveau NET', 'ncp.closeToSwitch': 'Ferme le NET pour changer', 'ncp.selectNetTitle': 'Sélectionne un NET', 'ncp.selectNetOption': '— sélectionner un NET —', 'ncp.closeNet': 'Fermer le NET', 'ncp.openNet': 'Ouvrir le NET', 'ncp.rename': 'Renommer', 'ncp.delete': 'Supprimer', 'ncp.netOpenBadge': 'NET OUVERT', 'ncp.onAir': "En l'air :", 'ncp.roster': 'Répertoire :', 'ncp.onAirActive': "En l'air — QSO actifs", 'ncp.activeHint': 'ordre de passage du micro · ⬆⬇ pour réordonner · double-clic → éditer · « Logger & terminer »', 'ncp.moveUp': "Monter dans l'ordre de passage", 'ncp.moveDown': "Descendre dans l'ordre de passage", 'ncp.logEndSelected': 'Logger & terminer la sélection', 'ncp.logAll': 'Logger tout le monde ({n})', 'ncp.logAllConfirm': 'Logger les {n} station(s) on air dans le logbook ?', 'ncp.netUsersRoster': 'Membres du NET — répertoire', 'ncp.rosterHint': "double-clic → mettre en l'air", 'ncp.addContact': 'Ajouter un contact', 'ncp.remove': 'Retirer', 'ncp.putOnAir': "Mettre la sélection en l'air", 'ncp.addContactTitle': 'Ajouter un contact au NET', 'ncp.addContactDesc': 'Enregistré dans le répertoire de ce NET (réutilisé à la prochaine ouverture).', 'ncp.callsign': 'Indicatif', 'ncp.search': 'Rechercher', 'ncp.name': 'Nom', 'ncp.country': 'Pays', 'ncp.cancel': 'Annuler', 'ncp.saveInNet': 'Enregistrer dans le NET',
   'udpp.svcWsjtLabel': 'WSJT-X / JTDX / MSHV', 'udpp.svcWsjtHint': "Logue automatiquement les QSO FT8/FT4/etc. et remplit l'indicatif de saisie en direct.", 'udpp.svcAdifLabel': 'Message ADIF (JTAlert, GridTracker)', 'udpp.svcAdifHint': 'Reçoit un seul enregistrement ADIF par paquet et le logue.', 'udpp.svcN1mmLabel': 'N1MM Logger+ (XML contest)', 'udpp.svcN1mmHint': 'Reçoit les QSO de contest sous forme de messages XML.', 'udpp.svcRemoteLabel': 'Indicatif distant (DXHunter, personnalisé)', 'udpp.svcRemoteHint': 'Un court paquet texte contenant juste un indicatif — remplit le champ de saisie.', 'udpp.svcDbLabel': "ADIF Message", 'udpp.svcDbHint': "Envoie l'ADIF de chaque QSO enregistré vers un écouteur distant (Cloudlog UDP, N1MM…).", 'udpp.svcPstLabel': 'Fréquence PstRotator', 'udpp.svcPstHint': "Envoie la fréquence du poste en <PST><FREQUENCY> à chaque changement — règle le tracker de PstRotatorAz sur DXLog.net (port 12040 par défaut).", 'udpp.svcN1mmRadioLabel': 'N1MM RadioInfo (fréq + mode)', 'udpp.svcN1mmRadioHint': "Diffuse la fréquence/mode du poste en XML RadioInfo N1MM Logger+ à chaque changement — lu par PstRotator (tracker N1MM) et beaucoup d'autres outils.", 'udpp.deleteConfirm': 'Supprimer cette connexion UDP ?', 'udpp.loading': 'Chargement…', 'udpp.intro': "Les connexions UDP permettent à OpsLog de dialoguer avec d'autres logiciels radioamateurs. Les connexions entrantes reçoivent des QSO ou des indicatifs et mettent le journal à jour en direct ; les connexions sortantes notifient d'autres apps quand tu enregistres un QSO localement. Active le multicast pour partager un port avec un autre écouteur sans conflit — nécessaire pour la config WSJT-X 2237 classique.", 'udpp.inboundTitle': 'Entrant — OpsLog écoute', 'udpp.outboundTitle': 'Sortant — OpsLog envoie', 'udpp.reloadAll': 'Tout recharger', 'udpp.reloadHint': 'Redémarre chaque écouteur activé après une modification manuelle.', 'udpp.add': 'Ajouter', 'udpp.noConnection': 'Aucune connexion.', 'udpp.unnamed': '(sans nom)', 'udpp.dialogTitle': '{action} connexion {direction}', 'udpp.new': 'Nouvelle', 'udpp.edit': 'Modifier', 'udpp.directionInbound': 'entrante', 'udpp.directionOutbound': 'sortante', 'udpp.name': 'Nom', 'udpp.namePhInbound': 'Log WSJT-X', 'udpp.namePhOutbound': 'Notification Cloudlog', 'udpp.serviceType': 'Type de service', 'udpp.port': 'Port', 'udpp.multicast': 'Multicast', 'udpp.multicastGroup': 'Groupe multicast', 'udpp.multicastHint': "Utilise la même adresse de groupe que l'app émettrice. Le défaut WSJT-X est 224.0.0.1.", 'udpp.destinationIp': 'IP de destination', 'udpp.enabled': 'Activé', 'udpp.cancel': 'Annuler', 'udpp.save': 'Enregistrer',
   'fltb.fCallsign': 'Callsign', 'fltb.fDate': 'Date / time (UTC)', 'fltb.fEndDate': 'End date / time', 'fltb.fBand': 'Band', 'fltb.fRxBand': 'RX band', 'fltb.fMode': 'Mode', 'fltb.fSubmode': 'Submode', 'fltb.fFreq': 'Frequency (Hz)', 'fltb.fRxFreq': 'RX frequency (Hz)', 'fltb.fRstSent': 'RST sent', 'fltb.fRstRcvd': 'RST rcvd', 'fltb.fName': 'Name', 'fltb.fQth': 'QTH', 'fltb.fAddress': 'Address', 'fltb.fEmail': 'E-mail', 'fltb.fGrid': 'Grid', 'fltb.fCountry': 'Country', 'fltb.fState': 'State', 'fltb.fCounty': 'County', 'fltb.fDxcc': 'DXCC #', 'fltb.fContinent': 'Continent', 'fltb.fCqz': 'CQ zone', 'fltb.fItuz': 'ITU zone', 'fltb.fIota': 'IOTA', 'fltb.fSota': 'SOTA ref', 'fltb.fPota': 'POTA ref', 'fltb.fWwff': 'WWFF ref', 'fltb.fRig': 'Rig', 'fltb.fAntenna': 'Antenna', 'fltb.fQslSent': 'Paper QSL sent status', 'fltb.fQslSentDate': 'Paper QSL sent date', 'fltb.fQslRcvd': 'Paper QSL received status', 'fltb.fQslRcvdDate': 'Paper QSL received date', 'fltb.fQslVia': 'QSL via', 'fltb.fLotwSent': 'LoTW sent status', 'fltb.fLotwSentDate': 'LoTW sent date', 'fltb.fLotwRcvd': 'LoTW received status', 'fltb.fLotwRcvdDate': 'LoTW received date', 'fltb.fEqslSent': 'eQSL sent status', 'fltb.fEqslSentDate': 'eQSL sent date', 'fltb.fEqslRcvd': 'eQSL received status', 'fltb.fEqslRcvdDate': 'eQSL received date', 'fltb.fQrzSent': 'QRZ.com sent status', 'fltb.fQrzSentDate': 'QRZ.com sent date', 'fltb.fQrzRcvd': 'QRZ.com received status', 'fltb.fQrzRcvdDate': 'QRZ.com received date', 'fltb.fClublogSent': 'Club Log sent status', 'fltb.fClublogSentDate': 'Club Log sent date', 'fltb.fHrdlogSent': 'HRDLog sent status', 'fltb.fHrdlogSentDate': 'HRDLog sent date', 'fltb.fContestId': 'Contest ID', 'fltb.fSerialRcvd': 'Serial rcvd', 'fltb.fSerialSent': 'Serial sent', 'fltb.fPropMode': 'Propagation mode', 'fltb.fSatellite': 'Satellite', 'fltb.fMyCallsign': 'Station callsign (my call)', 'fltb.fOperator': 'Operator', 'fltb.fOwnerCallsign': 'Owner callsign', 'fltb.fMyGrid': 'My grid', 'fltb.fMyCountry': 'My country', 'fltb.fMyState': 'My state', 'fltb.fMyCounty': 'My county', 'fltb.fMyIota': 'My IOTA', 'fltb.fMySota': 'My SOTA ref', 'fltb.fMyPota': 'My POTA ref', 'fltb.fMyWwff': 'My WWFF ref', 'fltb.fMyStreet': 'My street', 'fltb.fMyCity': 'My city', 'fltb.fMyPostal': 'My postal code', 'fltb.fMyRig': 'My rig', 'fltb.fMyAntenna': 'My antenna', 'fltb.fTxPower': 'TX power (W)', 'fltb.fComment': 'Comment', 'fltb.fNotes': 'Notes', 'fltb.opEq': 'égal (=)', 'fltb.opNe': 'différent (≠)', 'fltb.opContains': 'contient', 'fltb.opStartsWith': 'commence par', 'fltb.opEndsWith': 'finit par', 'fltb.opGt': 'supérieur à (>)', 'fltb.opLt': 'inférieur à (<)', 'fltb.opGe': 'supérieur ou égal (≥)', 'fltb.opLe': 'inférieur ou égal (≤)', 'fltb.opEmpty': 'est vide', 'fltb.opNotEmpty': "n'est pas vide", 'fltb.title': 'Filtre QSO', 'fltb.match': 'Correspondance', 'fltb.all': 'TOUS (ET)', 'fltb.any': 'AU MOINS UN (OU)', 'fltb.loadPreset': 'Charger un préréglage…', 'fltb.noConditions': 'Aucune condition — la liste affiche tous les QSO. Ajoutes-en une ci-dessous.', 'fltb.where': 'OÙ', 'fltb.valuePh': 'valeur', 'fltb.remove': 'Retirer', 'fltb.addCondition': 'Ajouter une condition', 'fltb.presetNamePh': 'Nom du préréglage…', 'fltb.savePreset': 'Enregistrer le préréglage', 'fltb.clear': 'Effacer', 'fltb.cancel': 'Annuler', 'fltb.applyClose': 'Appliquer & fermer',
-  'detp.propAS': 'Diffusion par avion', 'detp.propAUR': 'Aurore', 'detp.propAUE': 'Aurore-E', 'detp.propBS': 'Rétrodiffusion', 'detp.propEME': 'Terre-Lune-Terre', 'detp.propES': 'Sporadique E', 'detp.propFAI': 'Irrégularités alignées au champ', 'detp.propF2': 'Réflexion F2', 'detp.propGWAVE': 'Onde de sol', 'detp.propINTERNET': 'Assisté par Internet', 'detp.propION': 'Diffusion ionosphérique', 'detp.propLOS': 'Vue directe', 'detp.propMS': 'Diffusion météoritique', 'detp.propRPT': 'Répéteur terrestre / atmosphérique', 'detp.propRS': 'Diffusion par la pluie', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-équatorial', 'detp.propTR': 'Conduit troposphérique', 'detp.pathShort': 'Chemin court', 'detp.pathLong': 'Chemin long', 'detp.pathGrayline': 'Ligne grise', 'detp.pathOther': 'Autre', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Diplômes', 'detp.tabMy': 'Moi', 'detp.tabExtended': 'Étendu', 'detp.statePref': 'État / préf', 'detp.county': 'Comté', 'detp.prefix': 'Préfixe', 'detp.cqZone': 'Zone CQ', 'detp.ituZone': 'Zone ITU', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimut LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Adresse', 'detp.qslMessage': 'Message QSL', 'detp.qslVia': 'QSL via', 'detp.detected': 'Détecté — ce contact comptera pour :', 'detp.azimuth': 'Azimut (°)', 'detp.elevation': 'Élévation (°)', 'detp.txPower': 'Puissance TX (W)', 'detp.satelliteMode': 'Mode satellite', 'detp.antPath': 'Chemin ant.', 'detp.propagation': 'Propagation', 'detp.rig': 'Station', 'detp.antenna': 'Antenne', 'detp.satName': 'Nom du satellite', 'detp.contestId': 'ID contest', 'detp.rcvdExchangePh': 'échange reçu', 'detp.sentExchangePh': 'échange envoyé', 'detp.contactedEmail': 'E-mail du contact',
+  'detp.propAS': 'Diffusion par avion', 'detp.propAUR': 'Aurore', 'detp.propAUE': 'Aurore-E', 'detp.propBS': 'Rétrodiffusion', 'detp.propEME': 'Terre-Lune-Terre', 'detp.propES': 'Sporadique E', 'detp.propFAI': 'Irrégularités alignées au champ', 'detp.propF2': 'Réflexion F2', 'detp.propGWAVE': 'Onde de sol', 'detp.propINTERNET': 'Assisté par Internet', 'detp.propION': 'Diffusion ionosphérique', 'detp.propLOS': 'Vue directe', 'detp.propMS': 'Diffusion météoritique', 'detp.propRPT': 'Répéteur terrestre / atmosphérique', 'detp.propRS': 'Diffusion par la pluie', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-équatorial', 'detp.propTR': 'Conduit troposphérique', 'detp.pathShort': 'Chemin court', 'detp.pathLong': 'Chemin long', 'detp.pathGrayline': 'Ligne grise', 'detp.pathOther': 'Autre', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Diplômes', 'detp.tabMy': 'Moi', 'detp.tabExtended': 'Étendu', 'detp.statePref': 'État / préf', 'detp.county': 'Comté', 'detp.newCounty': 'NOUV', 'detp.newCountyTip': 'Comté jamais contacté', 'detp.prefix': 'Préfixe', 'detp.cqZone': 'CQ', 'detp.ituZone': 'ITU', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimut LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Adresse', 'detp.qslMessage': 'Message QSL', 'detp.qslVia': 'QSL via', 'detp.detected': 'Détecté — ce contact comptera pour :', 'detp.ambiguous': 'Ambigu — choisissez :', 'detp.azimuth': 'Azimut (°)', 'detp.elevation': 'Élévation (°)', 'detp.txPower': 'Puissance TX (W)', 'detp.satelliteMode': 'Mode satellite', 'detp.antPath': 'Chemin ant.', 'detp.propagation': 'Propagation', 'detp.rig': 'Station', 'detp.antenna': 'Antenne', 'detp.satName': 'Nom du satellite', 'detp.contestId': 'ID contest', 'detp.rcvdExchangePh': 'échange reçu', 'detp.sentExchangePh': 'échange envoyé', 'detp.contactedEmail': 'E-mail du contact',
   'awrp.remove': 'Retirer', 'awrp.searchLabel': 'Rechercher {label}…', 'awrp.searching': 'Recherche…', 'awrp.noMatch': 'Aucune correspondance.', 'awrp.noMatchDxcc': 'Aucune correspondance pour ce DXCC.',
   'awrs.group': 'Groupe', 'awrs.sub': 'Sous', 'awrs.pickReference': '← choisis une référence', 'awrs.add': 'Ajouter', 'awrs.enterCallsignFirst': "Saisis d'abord un indicatif", 'awrs.noRefsAdded': 'Aucune référence ajoutée', 'awrs.references': 'Références', 'awrs.autoMatchTitle': 'Le champ {field} vaut {code} — ce diplôme le compte automatiquement', 'awrs.fromField': 'depuis {field}', 'awrs.autoClickToAdd': 'auto — clic pour ajouter', 'awrs.search': 'Rechercher…', 'awrs.addUnlistedTitle': "Ajouter cette référence même si elle n'est pas encore dans la liste (nouvelle / non listée)", 'awrs.addPrefix': '+ Ajouter', 'awrs.unlisted': '(non listée)', 'awrs.searching': 'Recherche…', 'awrs.typeToSearch': 'Tape 2+ caractères pour chercher', 'awrs.enterCallsignOrSearch': 'Saisis un indicatif, ou tape pour chercher.', 'awrs.noRefsForEntity': 'Aucune référence pour cette entité.', 'awrs.noResults': 'Aucun résultat.', 'awrs.downloadLists': 'Télécharge les listes de références dans le panneau Diplômes → Importer les données.',
-  'awp.awards': 'Diplômes', 'awp.editAwards': 'Éditer les diplômes', 'awp.rescanTitle': 'Recharger le journal et recalculer (récupère les nouvelles confirmations LoTW/QRZ)', 'awp.rescan': 'Rescan', 'awp.selectAward': 'Sélectionner un diplôme…', 'awp.of': 'sur', 'awp.computing': 'Calcul…', 'awp.noData': 'Aucune donnée', 'awp.worked': 'contacté', 'awp.confirmed': 'confirmé', 'awp.validated': 'validé', 'awp.ofConfirmed': 'sur {total} · {pct}% confirmés', 'awp.byBand': 'Par bande (confirmés / contactés)', 'awp.filterReferences': 'Filtrer les références…', 'awp.filterAll': 'Tous', 'awp.filterWkd': 'Contactés', 'awp.filterNotWkd': 'Non contactés', 'awp.filterWkdNotCfmd': 'Contactés non conf.', 'awp.refs': 'réf.', 'awp.missingRefsTitle': "Contacts dans le périmètre de ce diplôme (bon DXCC/bande/mode) mais sans référence — exclus tant que tu n'en ajoutes pas", 'awp.missingRefs': 'Réf. manquantes', 'awp.gridView': 'Vue grille', 'awp.listView': 'Vue liste', 'awp.statistics': 'Statistiques', 'awp.statistic': 'Statistique', 'awp.total': 'Total', 'awp.grand': 'Général', 'awp.ref': 'Réf', 'awp.description': 'Description', 'awp.cellTitle': '{ref} · {band} — clic pour voir les QSO', 'awp.name': 'Nom', 'awp.groupCol': 'Groupe', 'awp.status': 'Statut', 'awp.bands': 'Bandes', 'awp.missing': '— manquant', 'awp.contactsMissingRef': 'contacts sans référence', 'awp.recomputeTitle': 'Recalculer — les contacts corrigés disparaissent de la liste', 'awp.refresh': 'Rafraîchir', 'awp.missingScopeHelp': 'Dans le périmètre de ce diplôme (DXCC / bande / mode / dates) mais aucune référence trouvée — ils ne comptent donc pas encore. Trie par colonne, coche les contacts concernés, puis attribue la référence ci-dessous.', 'awp.orClickRow': '(Ou clique une ligne pour ouvrir le QSO.)', 'awp.selectedArrow': '{n} sélectionné(s) →', 'awp.chooseReference': 'Choisir une référence à attribuer…', 'awp.assignToSelected': 'Attribuer à {n} sélectionné(s)', 'awp.scanning': 'Analyse…', 'awp.noGaps': "Aucun manque trouvé. (La détection de référence manquante s'applique aux diplômes limités à une entité DXCC — ex. DDFM, WAS, RAC, WAJA.)", 'awp.dateUtc': 'Date (UTC)', 'awp.callsign': 'Indicatif', 'awp.band': 'Bande', 'awp.mode': 'Mode', 'awp.country': 'Pays', 'awp.qthNote': 'QTH / Note', 'awp.stations': 'stations', 'awp.contactsWithoutRef': 'contacts sans référence', 'awp.assignedMsg': '{code}@{ref} attribué à {n} contact(s).', 'awp.loading': 'Chargement…', 'awp.noQsos': 'Aucun QSO.',
-  'awed.addCountry': 'Ajouter un pays…', 'awed.exportedTo': 'Diplômes exportés vers :\n{path}', 'awed.importedMsg': '{awards} diplôme(s) et {references} référence(s) importés.', 'awed.awardManagement': 'Gestion des diplômes', 'awed.searchAwards': 'Rechercher un diplôme…', 'awed.newAward': 'Nouveau diplôme', 'awed.clickToDismiss': 'Cliquer pour fermer', 'awed.selectOrCreate': 'Sélectionne ou crée un diplôme.', 'awed.tabInfo': 'Infos diplôme', 'awed.tabType': 'Type de diplôme', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'Références', 'awed.awardName': 'Nom du diplôme', 'awed.valid': 'Valide', 'awed.deleteAward': 'Supprimer le diplôme', 'awed.description': 'Description', 'awed.awardUrl': 'URL du diplôme', 'awed.refDisplay': 'La colonne affiche', 'awed.refDisplayRef': 'Référence', 'awed.refDisplayName': 'Description / nom', 'awed.refDisplayBoth': 'Les deux (réf — nom)', 'awed.referenceUrl': 'URL de référence', 'awed.validFrom': 'Valide du', 'awed.validTo': 'Valide au', 'awed.dxccFilter': 'Filtre DXCC', 'awed.validBands': 'Bandes valides (vide = toutes)', 'awed.emission': 'Émission (vide = toutes)', 'awed.validModes': 'Modes valides (vide = tous)', 'awed.awardType': 'Type de diplôme', 'awed.dynamicRefs': 'Références dynamiques (non prédéfinies — toute valeur compte, comme POTA)', 'awed.qsoParams': 'Paramètres QSO (utilisés par les types QSOFIELDS / REFERENCE)', 'awed.searchInField': 'Chercher dans le champ', 'awed.matchBy': 'Correspondance par', 'awed.exactMatch': 'Correspondance exacte (sinon cherche la référence dans le champ)', 'awed.patternRegex': 'Motif (regex)', 'awed.patternPlaceholder': 'groupe 1 = référence (pour correspondance par motif / dynamique)', 'awed.leadingString': 'Chaîne de début', 'awed.trailingString': 'Chaîne de fin', 'awed.additionalSearches': 'Recherches de repli', 'awed.orAlsoMatch': "— essayées dans l'ordre, seulement si rien n'a encore été trouvé ; la première qui marche gagne", 'awed.addOr': 'Ajouter OU', 'awed.orSearchIn': 'OU — chercher dans', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Supprimer cette recherche OU', 'awed.orPatternPlaceholder': 'regex — groupe 1 = référence (ex. \\b(\\d{2})\\d{3}\\b pour code postal → dépt)', 'awed.prefixPlaceholder': 'préfixe (D)', 'awed.prefixTitle': 'Ajouté devant chaque référence trouvée, ex. 74 → D74', 'awed.confirmationLabel': 'Confirmation (contacté → confirmé)', 'awed.validationLabel': 'Validation (confirmé → validé)', 'awed.resetDefaults': 'Réinitialiser par défaut', 'awed.exportTitle': 'Exporter toutes les définitions de diplômes + listes de références vers une sauvegarde JSON', 'awed.export': 'Exporter…', 'awed.importTitle': 'Importer un lot de diplômes (définitions + listes de références)', 'awed.import': 'Importer…', 'awed.cancel': 'Annuler', 'awed.save': 'Enregistrer', 'awed.populatedMsg': '{n} références intégrées ajoutées.', 'awed.newRefCodePrompt': 'Nouveau code de référence :', 'awed.importedRefsMsg': '{n} références importées.', 'awed.referenceCount': 'Nombre de références :', 'awed.applyPreset': 'Appliquer un préréglage…', 'awed.pasteCsv': 'Coller / CSV', 'awed.populateBuiltinTitle': 'Remplacer par la liste intégrée fournie (entités DXCC, départements français, …)', 'awed.populateBuiltin': "Charger l'intégrée", 'awed.updateOnline': 'Mettre à jour en ligne', 'awed.add': 'Ajouter', 'awed.onePerLine': 'Une référence par ligne :', 'awed.replacesList': '(virgule/point-virgule/tab). Remplace toute la liste.', 'awed.import2': 'Importer', 'awed.search': 'Rechercher…', 'awed.searching': 'Recherche…', 'awed.tooManyItems': "Trop d'éléments ({total}). Affine la recherche (tape 2+ caractères).", 'awed.noReferences': 'Aucune référence.', 'awed.selectReference': 'Sélectionne une référence, ou Ajouter / importer une liste.', 'awed.group': 'Groupe', 'awed.subgroup': 'Sous-groupe', 'awed.perRefRegex': 'regex optionnelle par référence', 'awed.grid': 'Locator', 'awed.saveReference': 'Enregistrer la référence',
+  'awp.awards': 'Diplômes', 'awp.editAwards': 'Éditer les diplômes', 'awp.rescanTitle': 'Recharger le journal et recalculer (récupère les nouvelles confirmations LoTW/QRZ)', 'awp.rescan': 'Rescan', 'awp.selectAward': 'Sélectionner un diplôme…', 'awp.of': 'sur', 'awp.computing': 'Calcul…', 'awp.noData': 'Aucune donnée', 'awp.worked': 'contacté', 'awp.confirmed': 'confirmé', 'awp.validated': 'validé', 'awp.ofConfirmed': 'sur {total} · {pct}% confirmés', 'awp.byBand': 'Par bande (confirmés / contactés)', 'awp.filterReferences': 'Filtrer les références…', 'awp.filterAll': 'Tous', 'awp.filterWkd': 'Contactés', 'awp.filterNotWkd': 'Non contactés', 'awp.filterWkdNotCfmd': 'Contactés non conf.', 'awp.modePhone': 'Phonie', 'awp.modeDigital': 'Numérique', 'awp.refs': 'réf.', 'awp.missingRefsTitle': "Contacts dans le périmètre de ce diplôme (bon DXCC/bande/mode) mais sans référence — exclus tant que tu n'en ajoutes pas", 'awp.missingRefs': 'Réf. manquantes', 'awp.gridView': 'Vue grille', 'awp.listView': 'Vue liste', 'awp.statistics': 'Statistiques', 'awp.statistic': 'Statistique', 'awp.total': 'Total', 'awp.grand': 'Général', 'awp.ref': 'Réf', 'awp.description': 'Description', 'awp.cellTitle': '{ref} · {band} — clic pour voir les QSO', 'awp.name': 'Nom', 'awp.groupCol': 'Groupe', 'awp.status': 'Statut', 'awp.bands': 'Bandes', 'awp.missing': '— manquant', 'awp.contactsMissingRef': 'contacts sans référence', 'awp.recomputeTitle': 'Recalculer — les contacts corrigés disparaissent de la liste', 'awp.refresh': 'Rafraîchir', 'awp.missingScopeHelp': 'Dans le périmètre de ce diplôme (DXCC / bande / mode / dates) mais aucune référence trouvée — ils ne comptent donc pas encore. Trie par colonne, coche les contacts concernés, puis attribue la référence ci-dessous.', 'awp.orClickRow': '(Ou clique une ligne pour ouvrir le QSO.)', 'awp.selectedArrow': '{n} sélectionné(s) →', 'awp.chooseReference': 'Choisir une référence à attribuer…', 'awp.assignToSelected': 'Attribuer à {n} sélectionné(s)', 'awp.scanning': 'Analyse…', 'awp.noGaps': "Aucun manque trouvé. (La détection de référence manquante s'applique aux diplômes limités à une entité DXCC — ex. DDFM, WAS, RAC, WAJA.)", 'awp.dateUtc': 'Date (UTC)', 'awp.callsign': 'Indicatif', 'awp.band': 'Bande', 'awp.mode': 'Mode', 'awp.country': 'Pays', 'awp.qthNote': 'QTH / Note', 'awp.stations': 'stations', 'awp.contactsWithoutRef': 'contacts sans référence', 'awp.assignedMsg': '{code}@{ref} attribué à {n} contact(s).', 'awp.loading': 'Chargement…', 'awp.noQsos': 'Aucun QSO.',
+  'awed.addCountry': 'Ajouter un pays…', 'awed.exportedTo': 'Diplômes exportés vers :\n{path}', 'awed.importedMsg': '{awards} diplôme(s) et {references} référence(s) importés.', 'awed.awardManagement': 'Gestion des diplômes', 'awed.searchAwards': 'Rechercher un diplôme…', 'awed.newAward': 'Nouveau diplôme', 'awed.clickToDismiss': 'Cliquer pour fermer', 'awed.selectOrCreate': 'Sélectionne ou crée un diplôme.', 'awed.tabInfo': 'Infos diplôme', 'awed.tabType': 'Type de diplôme', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'Références', 'awed.awardName': 'Nom du diplôme', 'awed.valid': 'Valide', 'awed.deleteAward': 'Supprimer le diplôme', 'awed.description': 'Description', 'awed.awardUrl': 'URL du diplôme', 'awed.refDisplay': 'La colonne affiche', 'awed.refDisplayRef': 'Référence', 'awed.refDisplayName': 'Description / nom', 'awed.refDisplayBoth': 'Les deux (réf — nom)', 'awed.referenceUrl': 'URL de référence', 'awed.validFrom': 'Valide du', 'awed.validTo': 'Valide au', 'awed.dxccFilter': 'Filtre DXCC', 'awed.validBands': 'Bandes valides (vide = toutes)', 'awed.emission': 'Émission (vide = toutes)', 'awed.validModes': 'Modes valides (vide = tous)', 'awed.awardType': 'Type de diplôme', 'awed.dynamicRefs': 'Références dynamiques (non prédéfinies — toute valeur compte, comme POTA)', 'awed.qsoParams': 'Paramètres QSO (utilisés par les types QSOFIELDS / REFERENCE)', 'awed.searchInField': 'Chercher dans le champ', 'awed.matchBy': 'Correspondance par', 'awed.exactMatch': 'Correspondance exacte (sinon cherche la référence dans le champ)', 'awed.oneRef': 'Une seule référence par QSO', 'awed.oneRefHint': 'Quand plusieurs références correspondent au même contact, n'+'’en affecter aucune et le lister dans les références manquantes. Pour les diplômes où deux entrées partagent une description — deux DOK nommés Gießen — en choisir une au hasard inscrirait la mauvaise dans le journal.', 'awed.patternRegex': 'Motif (regex)', 'awed.patternPlaceholder': 'groupe 1 = référence (pour correspondance par motif / dynamique)', 'awed.leadingString': 'Chaîne de début', 'awed.trailingString': 'Chaîne de fin', 'awed.additionalSearches': 'Recherches de repli', 'awed.orAlsoMatch': "— essayées dans l'ordre, seulement si rien n'a encore été trouvé ; la première qui marche gagne", 'awed.addOr': 'Ajouter OU', 'awed.orSearchIn': 'OU — chercher dans', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Supprimer cette recherche OU', 'awed.orPatternPlaceholder': 'regex — groupe 1 = référence (ex. \\b(\\d{2})\\d{3}\\b pour code postal → dépt)', 'awed.prefixPlaceholder': 'préfixe (D)', 'awed.prefixTitle': 'Ajouté devant chaque référence trouvée, ex. 74 → D74', 'awed.confirmationLabel': 'Confirmation (contacté → confirmé)', 'awed.validationLabel': 'Validation (confirmé → validé)', 'awed.resetDefaults': 'Réinitialiser par défaut', 'awed.exportTitle': 'Exporter toutes les définitions de diplômes + listes de références vers une sauvegarde JSON', 'awed.export': 'Exporter…', 'awed.importTitle': 'Importer un lot de diplômes (définitions + listes de références)', 'awed.import': 'Importer…', 'awed.cancel': 'Annuler', 'awed.save': 'Enregistrer', 'awed.populatedMsg': '{n} références intégrées ajoutées.', 'awed.newRefCodePrompt': 'Nouveau code de référence :', 'awed.importedRefsMsg': '{n} références importées.', 'awed.referenceCount': 'Nombre de références :', 'awed.applyPreset': 'Appliquer un préréglage…', 'awed.pasteCsv': 'Coller / CSV', 'awed.populateBuiltinTitle': 'Remplacer par la liste intégrée fournie (entités DXCC, départements français, …)', 'awed.populateBuiltin': "Charger l'intégrée", 'awed.updateOnline': 'Mettre à jour en ligne', 'awed.add': 'Ajouter', 'awed.onePerLine': 'Une référence par ligne :', 'awed.replacesList': '(virgule/point-virgule/tab). Remplace toute la liste.', 'awed.import2': 'Importer', 'awed.search': 'Rechercher…', 'awed.searching': 'Recherche…', 'awed.tooManyItems': "Trop d'éléments ({total}). Affine la recherche (tape 2+ caractères).", 'awed.noReferences': 'Aucune référence.', 'awed.selectReference': 'Sélectionne une référence, ou Ajouter / importer une liste.', 'awed.group': 'Groupe', 'awed.subgroup': 'Sous-groupe', 'awed.perRefRegex': 'regex optionnelle par référence', 'awed.grid': 'Locator', 'awed.saveReference': 'Enregistrer la référence',
   'awed.updateAvailable': 'Une nouvelle version de ce diplôme est disponible', 'awed.updateOverwrites': "Tu as modifié ce diplôme, la mise à jour n'a donc pas été appliquée. L'accepter remplacera ta définition et ta liste de références.", 'awed.updateApply': 'Mettre à jour', 'awed.updateKeepMine': 'Garder les miennes',
-  'awed.tabTest': 'Test', 'awed.testCallsign': 'Tester avec un indicatif', 'awed.testRun': 'Tester', 'awed.testSavedOnly': 'Teste le diplôme ENREGISTRÉ — enregistre tes modifications avant.', 'awed.testNoMatch': 'aucune correspondance', 'awed.testOutOfScope': "QSO hors périmètre — aucune règle n'a été exécutée.", 'awed.testSkipped': "non exécutée : une règle précédente a déjà trouvé", 'awed.testFieldValue': 'Champ', 'awed.testEmptyField': 'vide', 'awed.testNoCandidate': "n'a produit aucun candidat", 'awed.testManual': 'Référence forcée à la main', 'awed.testSameAs': '+{n} autre(s) QSO, même résultat',
+  'awed.tabTest': 'Test', 'awed.testCallsign': 'Tester avec un indicatif', 'awed.testRun': 'Tester', 'awed.testSavedOnly': 'Teste le diplôme ENREGISTRÉ — enregistre tes modifications avant.', 'awed.testNoMatch': 'aucune correspondance', 'awed.testOutOfScope': "QSO hors périmètre — aucune règle n'a été exécutée.", 'awed.testSkipped': "non exécutée : une règle précédente a déjà trouvé", 'awed.testFieldValue': 'Champ', 'awed.testEmptyField': 'vide', 'awed.testNoCandidate': "n'a produit aucun candidat", 'awed.testManual': 'Référence forcée à la main', 'awed.testAmbiguous': 'Ambigu', 'awed.testAmbiguousHint': '— aucune retenue, ce diplôme n’admet qu’une référence par QSO. Affectez la bonne à la main.', 'awed.testSameAs': '+{n} autre(s) QSO, même résultat',
   'awed.exportOne': 'Partager {code}',
   'awed.onlyHere': 'local',
   'awed.onlyHereTip': 'À toi — non livré avec OpsLog. Son JSON est tenu à jour dans le dossier awards ; envoie ce fichier pour le partager.',
@@ -790,7 +802,7 @@ const fr: Dict = {
   'awed.importKeepMine': 'Garder le mien',
   'awed.importReplace': 'Remplacer le mien',
   'awed.importCopy': 'Importer en {code}-2',
-  'qctx.selected': '{n} QSO sélectionné(s)', 'qctx.fixCountry': 'Corriger pays et zones depuis cty.dat', 'qctx.updateQrz': 'Mettre à jour depuis QRZ.com', 'qctx.updateClublog': 'Mettre à jour depuis ClubLog (exceptions)', 'qctx.sendQslEmail': 'Envoyer la QSL OpsLog par e-mail', 'qctx.sendRecording': "Envoyer l'enregistrement par e-mail", 'qctx.bulkEdit': "Édition groupée d'un champ… ({n})", 'qctx.exportSelectedAdif': 'Exporter la sélection en ADIF ({n})', 'qctx.exportFilteredAdif': 'Exporter la vue filtrée en ADIF (sans limite)', 'qctx.exportSelectedCabrillo': 'Exporter la sélection en Cabrillo ({n})', 'qctx.exportFilteredCabrillo': 'Exporter la vue filtrée en Cabrillo (sans limite)', 'qctx.sendTo': 'Envoyer vers {name}', 'qctx.delete': 'Supprimer {n} QSO…',
+  'qctx.selected': '{n} QSO sélectionné(s)', 'qctx.fixCountry': 'Corriger pays et zones depuis cty.dat', 'qctx.updateQrz': 'Mettre à jour depuis les annuaires', 'qctx.updateClublog': 'Mettre à jour depuis ClubLog (exceptions)', 'qctx.sendQslEmail': 'Envoyer la QSL OpsLog par e-mail', 'qctx.sendRecording': "Envoyer l'enregistrement par e-mail", 'qctx.bulkEdit': "Édition groupée d'un champ… ({n})", 'qctx.exportSelectedAdif': 'Exporter la sélection en ADIF ({n})', 'qctx.exportFilteredAdif': 'Exporter la vue filtrée en ADIF (sans limite)', 'qctx.exportSelectedCabrillo': 'Exporter la sélection en Cabrillo ({n})', 'qctx.exportFilteredCabrillo': 'Exporter la vue filtrée en Cabrillo (sans limite)', 'qctx.sendTo': 'Envoyer vers {name}', 'qctx.delete': 'Supprimer {n} QSO…',
   'exp.title': 'Exporter en ADIF', 'exp.desc': 'Choisissez les champs à écrire.',
   'exp.stdTitle': 'Champs ADIF standard', 'exp.stdDesc': 'Uniquement les champs officiels ADIF 3.1.7 — idéal pour l’envoi vers d’autres carnets (LoTW, QRZ, Club Log…).',
   'exp.allTitle': 'Tous les champs OpsLog', 'exp.allDesc': 'Tout, y compris les champs spécifiques à OpsLog et les balises applicatives — une sauvegarde complète ré-importable ici.',
@@ -815,7 +827,7 @@ const fr: Dict = {
   'aud.txOn': 'ÉMISSION — micro → Vers la radio, PTT activé. Cliquez pour arrêter.', 'aud.txHint': "Micro direct → poste avec PTT (USB pour l'instant ; TX réseau plus tard).",
   'aud.recorder': 'Enregistreur de QSO', 'aud.recordEvery': 'Enregistrer chaque QSO dans un fichier audio (Depuis la radio + votre micro)', 'aud.recFolder': 'Dossier des enregistrements', 'aud.browse': 'Parcourir…',
   'aud.preroll': 'Pré-enregistrement (secondes)', 'aud.format': 'Format de fichier', 'aud.wav': 'WAV (sans perte, plus volumineux)', 'aud.mp3': 'MP3 (compressé, léger)',
-  'aud.fromLevel': 'Niveau depuis la radio', 'aud.txLevel': 'Niveau du voice keyer', 'aud.txLevelHint': "Niveau des messages enregistrés envoyés à la radio. Augmentez-le si votre voice keyer est bien plus faible que votre micro ; Lire fait entendre ce même niveau. Si la radio n'émet presque rien, c'est que sa source de modulation est restée le micro de façade : sur un FTDX10, réglez MENU → SSB MOD SOURCE sur REAR (l'entrée USB).", 'aud.micLevel': 'Niveau micro', 'aud.levelHint': 'Si votre voix est plus forte que la station, baissez le niveau micro.',
+  'aud.fromLevel': 'Niveau depuis la radio', 'aud.txLevel': 'Niveau du voice keyer', 'aud.txLevelHint': "Niveau des messages enregistrés envoyés à la radio. Augmentez-le si votre voice keyer est bien plus faible que votre micro ; Lire fait entendre ce même niveau. Si la radio n'émet presque rien, c'est que sa source de modulation est restée le micro de façade : sur un FTDX10, réglez MENU → SSB MOD SOURCE sur REAR (l'entrée USB).", 'aud.micLevel': 'Niveau micro', 'aud.qsoPlayLevel': 'Niveau de relecture QSO', 'aud.levelHint': 'Si votre voix est plus forte que la station, baissez le niveau micro.',
   'aud.autoSend': "Envoyer automatiquement l'enregistrement à la station par e-mail lorsque j'enregistre un QSO",
   'aud.dvkTitle': 'Messages du manipulateur vocal (F1–F6)', 'aud.pttMethod': 'Méthode PTT', 'aud.pttNone': 'Aucune (VOX)', 'aud.pttCat': 'CAT (la liaison radio)', 'aud.pttRts': 'RTS série', 'aud.pttDtr': 'DTR série',
   'aud.testPtt': 'Tester le PTT', 'aud.pttPort': 'Port COM du PTT', 'aud.pickPort': 'Choisir un port COM', 'aud.selectPort': '— choisir —', 'aud.refresh': 'Actualiser',

frontend/src/lib/qslStatus.ts

@@ -0,0 +1,41 @@
+// Colouring for QSL / confirmation status letters.
+//
+// These columns are read by COLOUR before they are read as letters: an operator
+// scanning a hundred rows wants to see where the gaps are, not to read "Y" a
+// hundred times.
+//
+// Colour ONLY — no pill, no badge. These values sit among callsigns and dates,
+// and a column of coloured boxes would shout louder than the callsign it
+// belongs to.
+//
+// The classes are semantic tokens, not fixed colours, so all four themes follow
+// and the contrast stays right on the light ones.
+
+// ADIF confirmation values, and what they mean to the operator:
+//   Y  confirmed / sent
+//   N  not sent, not received
+//   R  requested — queued, waiting on the other station or the service
+//   I  ignore (ADIF's "invalid/ignore"), left in default ink: it is neither
+//      good news nor bad, and colouring it would put it in one camp or the
+//      other.
+//
+// Anything else — a blank, or a status some other logger wrote — is left alone
+// rather than guessed at.
+export function qslStatusClass(value: unknown): string {
+	switch (String(value ?? '').trim().toUpperCase()) {
+		case 'Y':
+			return 'text-success';
+		case 'N':
+			return 'text-destructive';
+		case 'R':
+			return 'text-info';
+	}
+	return '';
+}
+
+// qslStatusCellClass is the AG-Grid form: same rule, plus the monospace the
+// status columns already used so the letters stay in a straight column.
+export function qslStatusCellClass(p: { value?: unknown }): string {
+	const c = qslStatusClass(p?.value);
+	return c ? 'font-mono ' + c : 'font-mono';
+}

frontend/src/lib/uiPref.ts

@@ -5,7 +5,7 @@
 // folder (data/) to another machine. These helpers mirror them into the DB
 // settings table (ui.* keys, like the grid columns) so the whole setup is
 // identical after a copy.
-import { GetUIPref, SetUIPref } from '../../wailsjs/go/main/App';
+import { GetUIPref, SetUIPref, LogUIError } from '../../wailsjs/go/main/App';
 
 // Keys that must travel with data/ (DB is the portable source of truth; the
 // localStorage copy is just a fast, synchronous cache).
@@ -17,6 +17,8 @@ const PORTABLE_KEYS = [
   'opslog.autofocusWB',   // auto-focus Worked-before
   'hamlog.filterPresets', // Filter Builder saved presets
   'opslog.showRotor',     // rotor compass shown next to the keyers
+  'opslog.showAmpWidget', // amplifier widget shown next to the keyers
+  'opslog.ampSel.widget', // which amplifier that widget shows ("all" or an amp id)
   'opslog.showBeamOnMap', // antenna beam lobe drawn on the Main map
   'opslog.startEqualsEnd',// log TIME_ON = TIME_OFF (QSO time = completion time)
   'opslog.showQsoRate',   // QSO-rate meter (10/60 min) shown in the header
@@ -28,11 +30,15 @@ const PORTABLE_KEYS = [
   'opslog.groupDigitalSlots', // matrix + cluster: all digital modes count as ONE (DXCC-style) instead of per-mode slots
   'opslog.clusterShowFilters', // cluster filter sidebar shown (tab + Main pane)
   'opslog.mapBasemap',    // world map basemap (light / street / satellite)
+  'opslog.dateFormat',    // how dates are DISPLAYED (iso / fr / us); storage stays ISO
+  'opslog.mapGreyline',   // world map: grey line (day/night terminator) shown
+  'opslog.awardRefSort', 'opslog.awardRefSortDir', // award reference table: sort column and direction
   // Cluster filter selections — restored on reopen.
   'opslog.clusterFilterSource', 'opslog.clusterGroup', 'opslog.clusterBands',
   'opslog.clusterLockBand', 'opslog.clusterLockMode', 'opslog.clusterStatusFilter',
   'opslog.clusterModeFilter', 'opslog.clusterSearch', 'opslog.clusterHideWorked',
   'opslog.activeTab',     // last selected tab
+  'opslog.mainSplit',    // Main tab: width share of the left pane (percent)
   // NOTE: 'hamlog.awardColsShown' and the grid column layouts are NOT listed here.
   // They are handled by lib/gridPrefs, which scopes the localStorage cache PER
   // PROFILE and mirrors to the DB (already per-profile) itself — mirroring them
@@ -62,5 +68,11 @@ export async function syncPortablePrefs(): Promise<void> {
 // Use it everywhere these keys are written instead of localStorage.setItem.
 export function writeUiPref(key: string, value: string): void {
   try { localStorage.setItem(key, value); } catch { /* quota / private mode */ }
-  SetUIPref(key, value).catch(() => { /* DB unavailable — the cache still holds it */ });
+  SetUIPref(key, value).catch((e: any) => {
+    // The cache still holds it, so the interface behaves — but the BACKEND
+    // reads some of these keys too (digital-mode grouping decides how the
+    // cluster judges a slot). A write that reaches localStorage and not the
+    // database makes the two disagree, and used to do so in silence.
+    try { LogUIError("ui pref", "could not store " + key + ": " + String(e?.message ?? e), ""); } catch {}
+  });
 }

frontend/src/main.tsx

@@ -6,6 +6,7 @@ import { syncPortablePrefs } from './lib/uiPref'
 import { I18nProvider } from './lib/i18n'
 import { ThemeProvider, initTheme } from './lib/theme'
 import { ErrorBoundary, installGlobalErrorLogging } from './components/ErrorBoundary'
+import { reloadDateFormat } from './lib/dateFormat'
 
 const container = document.getElementById('root')
 
@@ -18,6 +19,10 @@ syncPortablePrefs().finally(() => {
     // Stamp the persisted theme onto <html> before render so the correct
     // palette is applied immediately (portable pref hydrated just above).
     initTheme()
+    // The date format module read localStorage at import time, which is BEFORE
+    // the portable prefs were pulled from the database. Re-read it now, or a
+    // copied data/ folder would show ISO until the next launch.
+    reloadDateFormat()
     // Catch what a boundary cannot: errors thrown from timers, event handlers and
     // rejected promises. Installed before the first render so a fault during
     // startup is reported too.

frontend/src/style.css

@@ -679,10 +679,10 @@
    disappears on the dark themes. Invert it there — the control itself is worth
    keeping (OS calendar, locale date order, keyboard entry), only its icon needs
    help. */
-[data-theme='dim-slate'] input[type='date']::-webkit-calendar-picker-indicator,
-[data-theme='dark-warm'] input[type='date']::-webkit-calendar-picker-indicator,
-[data-theme='dark-graphite'] input[type='date']::-webkit-calendar-picker-indicator,
-[data-theme='high-contrast'] input[type='date']::-webkit-calendar-picker-indicator {
-  filter: invert(1) brightness(1.6);
-  opacity: 0.75;
+   Every temporal input carries the same glyph, so the rule names them all:
+   datetime-local was left out at first and its icon stayed invisible. */
+:is([data-theme='dim-slate'], [data-theme='dark-warm'], [data-theme='dark-graphite'], [data-theme='high-contrast'])
+  :is(input[type='date'], input[type='datetime-local'], input[type='time'], input[type='month'], input[type='week'])::-webkit-calendar-picker-indicator {
+  filter: invert(1) brightness(1.8);
+  opacity: 0.9;
 }

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.22.2';
+export const APP_VERSION = '0.22.9';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -61,6 +61,8 @@ export function ApplyAwardUpdate(arg1:string):Promise<void>;
 
 export function AssignAwardRefToQSOs(arg1:string,arg2:string,arg3:Array<number>):Promise<number>;
 
+export function AudioApplyLevels(arg1:number,arg2:number):Promise<void>;
+
 export function AudioMonitorActive():Promise<boolean>;
 
 export function AudioStartMonitor():Promise<void>;
@@ -73,7 +75,7 @@ export function AudioStopTX():Promise<void>;
 
 export function AudioTXActive():Promise<boolean>;
 
-export function AwardCellQSOs(arg1:string,arg2:string,arg3:string):Promise<Array<qso.QSO>>;
+export function AwardCellQSOs(arg1:string,arg2:string,arg3:string,arg4:string):Promise<Array<qso.QSO>>;
 
 export function AwardFields():Promise<Array<string>>;
 
@@ -91,6 +93,8 @@ export function BulkUpdateField(arg1:Array<number>,arg2:string,arg3:string):Prom
 
 export function BulkUpdateQSL(arg1:Array<number>,arg2:main.QSLBulkUpdate):Promise<number>;
 
+export function CIVTraceEnabled():Promise<boolean>;
+
 export function CWDecoderRunning():Promise<boolean>;
 
 export function ChatAvailable():Promise<boolean>;
@@ -215,6 +219,8 @@ export function FlexAmpOperate(arg1:boolean):Promise<void>;
 
 export function FlexApplyBandAntenna(arg1:string):Promise<void>;
 
+export function FlexApplyBandPower(arg1:string,arg2:string):Promise<void>;
+
 export function FlexBackspaceCW(arg1:number):Promise<void>;
 
 export function FlexMox(arg1:boolean):Promise<void>;
@@ -359,7 +365,7 @@ export function GetAudioSettings():Promise<main.AudioSettings>;
 
 export function GetAutostartPrograms():Promise<Array<main.AutostartProgram>>;
 
-export function GetAward(arg1:string):Promise<award.Result>;
+export function GetAward(arg1:string,arg2:string):Promise<award.Result>;
 
 export function GetAwardDefs():Promise<Array<award.Def>>;
 
@@ -417,6 +423,8 @@ export function GetExternalServices():Promise<extsvc.ExternalServices>;
 
 export function GetFlexBandAntennas():Promise<Record<string, main.FlexBandAnt>>;
 
+export function GetFlexBandPower():Promise<Record<string, main.FlexBandPower>>;
+
 export function GetFlexState():Promise<cat.FlexTXState>;
 
 export function GetIcomState():Promise<cat.IcomTXState>;
@@ -597,6 +605,8 @@ export function ImportAwards():Promise<main.AwardImportResult>;
 
 export function InspectAwardImport():Promise<main.AwardImportPreview>;
 
+export function IsNewUSCounty(arg1:string,arg2:string):Promise<boolean>;
+
 export function LaunchAutostartProgram(arg1:string):Promise<main.AutostartLaunchResult>;
 
 export function LaunchAutostartPrograms():Promise<Array<main.AutostartLaunchResult>>;
@@ -747,10 +757,20 @@ export function QSOAudioBegin():Promise<boolean>;
 
 export function QSOAudioCancel():Promise<void>;
 
+export function QSOAudioManualReady():Promise<boolean>;
+
+export function QSOAudioManualStart():Promise<boolean>;
+
+export function QSOAudioPlayOnAir():Promise<void>;
+
 export function QSOAudioResetClock():Promise<boolean>;
 
 export function QSOAudioRestart():Promise<boolean>;
 
+export function QSOAudioResume():Promise<boolean>;
+
+export function QSOAudioStop():Promise<boolean>;
+
 export function QuitApp():Promise<void>;
 
 export function RecomputeAllAwardRefs():Promise<number>;
@@ -837,6 +857,8 @@ export function SaveExternalServices(arg1:extsvc.ExternalServices):Promise<void>
 
 export function SaveFlexBandAntennas(arg1:Record<string, main.FlexBandAnt>):Promise<void>;
 
+export function SaveFlexBandPower(arg1:Record<string, main.FlexBandPower>):Promise<void>;
+
 export function SaveListsSettings(arg1:main.ListsSettings):Promise<void>;
 
 export function SaveLookupSettings(arg1:main.LookupSettings):Promise<void>;
@@ -1037,6 +1059,8 @@ export function WinkeyerSetSpeed(arg1:number):Promise<void>;
 
 export function WinkeyerStop():Promise<void>;
 
+export function WinkeyerTraceEnabled():Promise<boolean>;
+
 export function WorkedBefore(arg1:string,arg2:number):Promise<qso.WorkedBefore>;
 
 export function YaesuSendCW(arg1:string):Promise<void>;

frontend/wailsjs/go/main/App.js

@@ -70,6 +70,10 @@ export function AssignAwardRefToQSOs(arg1, arg2, arg3) {
   return window['go']['main']['App']['AssignAwardRefToQSOs'](arg1, arg2, arg3);
 }
 
+export function AudioApplyLevels(arg1, arg2) {
+  return window['go']['main']['App']['AudioApplyLevels'](arg1, arg2);
+}
+
 export function AudioMonitorActive() {
   return window['go']['main']['App']['AudioMonitorActive']();
 }
@@ -94,8 +98,8 @@ export function AudioTXActive() {
   return window['go']['main']['App']['AudioTXActive']();
 }
 
-export function AwardCellQSOs(arg1, arg2, arg3) {
-  return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3);
+export function AwardCellQSOs(arg1, arg2, arg3, arg4) {
+  return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3, arg4);
 }
 
 export function AwardFields() {
@@ -130,6 +134,10 @@ export function BulkUpdateQSL(arg1, arg2) {
   return window['go']['main']['App']['BulkUpdateQSL'](arg1, arg2);
 }
 
+export function CIVTraceEnabled() {
+  return window['go']['main']['App']['CIVTraceEnabled']();
+}
+
 export function CWDecoderRunning() {
   return window['go']['main']['App']['CWDecoderRunning']();
 }
@@ -378,6 +386,10 @@ export function FlexApplyBandAntenna(arg1) {
   return window['go']['main']['App']['FlexApplyBandAntenna'](arg1);
 }
 
+export function FlexApplyBandPower(arg1, arg2) {
+  return window['go']['main']['App']['FlexApplyBandPower'](arg1, arg2);
+}
+
 export function FlexBackspaceCW(arg1) {
   return window['go']['main']['App']['FlexBackspaceCW'](arg1);
 }
@@ -666,8 +678,8 @@ export function GetAutostartPrograms() {
   return window['go']['main']['App']['GetAutostartPrograms']();
 }
 
-export function GetAward(arg1) {
-  return window['go']['main']['App']['GetAward'](arg1);
+export function GetAward(arg1, arg2) {
+  return window['go']['main']['App']['GetAward'](arg1, arg2);
 }
 
 export function GetAwardDefs() {
@@ -782,6 +794,10 @@ export function GetFlexBandAntennas() {
   return window['go']['main']['App']['GetFlexBandAntennas']();
 }
 
+export function GetFlexBandPower() {
+  return window['go']['main']['App']['GetFlexBandPower']();
+}
+
 export function GetFlexState() {
   return window['go']['main']['App']['GetFlexState']();
 }
@@ -1142,6 +1158,10 @@ export function InspectAwardImport() {
   return window['go']['main']['App']['InspectAwardImport']();
 }
 
+export function IsNewUSCounty(arg1, arg2) {
+  return window['go']['main']['App']['IsNewUSCounty'](arg1, arg2);
+}
+
 export function LaunchAutostartProgram(arg1) {
   return window['go']['main']['App']['LaunchAutostartProgram'](arg1);
 }
@@ -1442,6 +1462,18 @@ export function QSOAudioCancel() {
   return window['go']['main']['App']['QSOAudioCancel']();
 }
 
+export function QSOAudioManualReady() {
+  return window['go']['main']['App']['QSOAudioManualReady']();
+}
+
+export function QSOAudioManualStart() {
+  return window['go']['main']['App']['QSOAudioManualStart']();
+}
+
+export function QSOAudioPlayOnAir() {
+  return window['go']['main']['App']['QSOAudioPlayOnAir']();
+}
+
 export function QSOAudioResetClock() {
   return window['go']['main']['App']['QSOAudioResetClock']();
 }
@@ -1450,6 +1482,14 @@ export function QSOAudioRestart() {
   return window['go']['main']['App']['QSOAudioRestart']();
 }
 
+export function QSOAudioResume() {
+  return window['go']['main']['App']['QSOAudioResume']();
+}
+
+export function QSOAudioStop() {
+  return window['go']['main']['App']['QSOAudioStop']();
+}
+
 export function QuitApp() {
   return window['go']['main']['App']['QuitApp']();
 }
@@ -1622,6 +1662,10 @@ export function SaveFlexBandAntennas(arg1) {
   return window['go']['main']['App']['SaveFlexBandAntennas'](arg1);
 }
 
+export function SaveFlexBandPower(arg1) {
+  return window['go']['main']['App']['SaveFlexBandPower'](arg1);
+}
+
 export function SaveListsSettings(arg1) {
   return window['go']['main']['App']['SaveListsSettings'](arg1);
 }
@@ -2022,6 +2066,10 @@ export function WinkeyerStop() {
   return window['go']['main']['App']['WinkeyerStop']();
 }
 
+export function WinkeyerTraceEnabled() {
+  return window['go']['main']['App']['WinkeyerTraceEnabled']();
+}
+
 export function WorkedBefore(arg1, arg2) {
   return window['go']['main']['App']['WorkedBefore'](arg1, arg2);
 }

frontend/wailsjs/go/models.ts

@@ -316,6 +316,7 @@ export namespace award {
 	    leading_str?: string;
 	    trailing_str?: string;
 	    dynamic?: boolean;
+	    one_ref_per_qso?: boolean;
 	    or_rules?: OrRule[];
 	    dxcc_filter: number[];
 	    valid_bands?: string[];
@@ -356,6 +357,7 @@ export namespace award {
 	        this.leading_str = source["leading_str"];
 	        this.trailing_str = source["trailing_str"];
 	        this.dynamic = source["dynamic"];
+	        this.one_ref_per_qso = source["one_ref_per_qso"];
 	        this.or_rules = this.convertValues(source["or_rules"], OrRule);
 	        this.dxcc_filter = source["dxcc_filter"];
 	        this.valid_bands = source["valid_bands"];
@@ -461,6 +463,8 @@ export namespace award {
 	    ref_count: number;
 	    steps: Step[];
 	    manual?: string[];
+	    superseded?: string[];
+	    ambiguous?: string[];
 	    result: string[];
 	
 	    static createFrom(source: any = {}) {
@@ -476,6 +480,8 @@ export namespace award {
 	        this.ref_count = source["ref_count"];
 	        this.steps = this.convertValues(source["steps"], Step);
 	        this.manual = source["manual"];
+	        this.superseded = source["superseded"];
+	        this.ambiguous = source["ambiguous"];
 	        this.result = source["result"];
 	    }
 	
@@ -506,6 +512,8 @@ export namespace award {
 	    worked: boolean;
 	    confirmed: boolean;
 	    validated: boolean;
+	    modes: string[];
+	    confirmed_modes: string[];
 	    bands: string[];
 	    confirmed_bands: string[];
 	    validated_bands: string[];
@@ -523,6 +531,8 @@ export namespace award {
 	        this.worked = source["worked"];
 	        this.confirmed = source["confirmed"];
 	        this.validated = source["validated"];
+	        this.modes = source["modes"];
+	        this.confirmed_modes = source["confirmed_modes"];
 	        this.bands = source["bands"];
 	        this.confirmed_bands = source["confirmed_bands"];
 	        this.validated_bands = source["validated_bands"];
@@ -1297,6 +1307,7 @@ export namespace extsvc {
 	    hrdlog: ServiceConfig;
 	    eqsl: ServiceConfig;
 	    cloudlog: ServiceConfig;
+	    delete_remote: boolean;
 	
 	    static createFrom(source: any = {}) {
 	        return new ExternalServices(source);
@@ -1310,6 +1321,7 @@ export namespace extsvc {
 	        this.hrdlog = this.convertValues(source["hrdlog"], ServiceConfig);
 	        this.eqsl = this.convertValues(source["eqsl"], ServiceConfig);
 	        this.cloudlog = this.convertValues(source["cloudlog"], ServiceConfig);
+	        this.delete_remote = source["delete_remote"];
 	    }
 	
 		convertValues(a: any, classs: any, asMap: boolean = false): any {
@@ -1602,6 +1614,7 @@ export namespace main {
 	    from_gain: number;
 	    mic_gain: number;
 	    tx_gain: number;
+	    qso_play_gain: number;
 	
 	    static createFrom(source: any = {}) {
 	        return new AudioSettings(source);
@@ -1622,6 +1635,7 @@ export namespace main {
 	        this.from_gain = source["from_gain"];
 	        this.mic_gain = source["mic_gain"];
 	        this.tx_gain = source["tx_gain"];
+	        this.qso_play_gain = source["qso_play_gain"];
 	    }
 	}
 	export class AutostartLaunchResult {
@@ -1904,10 +1918,14 @@ export namespace main {
 	    xiegu_port: string;
 	    xiegu_baud: number;
 	    xiegu_addr: number;
+	    xiegu_ptt_line: string;
 	    yaesu_port: string;
 	    yaesu_baud: number;
+	    kenwood_host: string;
 	    kenwood_port: string;
 	    kenwood_baud: number;
+	    yaesu_low_lines: boolean;
+	    kenwood_low_lines: boolean;
 	    icom_port: string;
 	    icom_baud: number;
 	    icom_addr: number;
@@ -1942,10 +1960,14 @@ export namespace main {
 	        this.xiegu_port = source["xiegu_port"];
 	        this.xiegu_baud = source["xiegu_baud"];
 	        this.xiegu_addr = source["xiegu_addr"];
+	        this.xiegu_ptt_line = source["xiegu_ptt_line"];
 	        this.yaesu_port = source["yaesu_port"];
 	        this.yaesu_baud = source["yaesu_baud"];
+	        this.kenwood_host = source["kenwood_host"];
 	        this.kenwood_port = source["kenwood_port"];
 	        this.kenwood_baud = source["kenwood_baud"];
+	        this.yaesu_low_lines = source["yaesu_low_lines"];
+	        this.kenwood_low_lines = source["kenwood_low_lines"];
 	        this.icom_port = source["icom_port"];
 	        this.icom_baud = source["icom_baud"];
 	        this.icom_addr = source["icom_addr"];
@@ -2690,6 +2712,7 @@ export namespace main {
 	    ref: string;
 	    name?: string;
 	    pickable: boolean;
+	    ambiguous?: boolean;
 	
 	    static createFrom(source: any = {}) {
 	        return new QSOAwardRef(source);
@@ -2701,6 +2724,7 @@ export namespace main {
 	        this.ref = source["ref"];
 	        this.name = source["name"];
 	        this.pickable = source["pickable"];
+	        this.ambiguous = source["ambiguous"];
 	    }
 	}
 	export class QSORate {
@@ -3477,6 +3501,11 @@ export namespace powergenius {
 	    fan_mode?: string;
 	    temperature: number;
 	    operate: boolean;
+	    fwd_w: number;
+	    peak_w: number;
+	    vswr: number;
+	    id: number;
+	    peak_id: number;
 	
 	    static createFrom(source: any = {}) {
 	        return new Status(source);
@@ -3491,6 +3520,11 @@ export namespace powergenius {
 	        this.fan_mode = source["fan_mode"];
 	        this.temperature = source["temperature"];
 	        this.operate = source["operate"];
+	        this.fwd_w = source["fwd_w"];
+	        this.peak_w = source["peak_w"];
+	        this.vswr = source["vswr"];
+	        this.id = source["id"];
+	        this.peak_id = source["peak_id"];
 	    }
 	}
 
@@ -4536,6 +4570,7 @@ export namespace spe {
 	
 	export class Status {
 	    connected: boolean;
+	    transport: string;
 	    last_error?: string;
 	    model?: string;
 	    operate: boolean;
@@ -4559,6 +4594,7 @@ export namespace spe {
 	    constructor(source: any = {}) {
 	        if ('string' === typeof source) source = JSON.parse(source);
 	        this.connected = source["connected"];
+	        this.transport = source["transport"];
 	        this.last_error = source["last_error"];
 	        this.model = source["model"];
 	        this.operate = source["operate"];
@@ -4613,6 +4649,7 @@ export namespace tunergenius {
 	    last_error?: string;
 	    fwd_dbm: number;
 	    fwd_w: number;
+	    peak_w: number;
 	    swr_db: number;
 	    vswr: number;
 	    operate: boolean;
@@ -4640,6 +4677,7 @@ export namespace tunergenius {
 	        this.last_error = source["last_error"];
 	        this.fwd_dbm = source["fwd_dbm"];
 	        this.fwd_w = source["fwd_w"];
+	        this.peak_w = source["peak_w"];
 	        this.swr_db = source["swr_db"];
 	        this.vswr = source["vswr"];
 	        this.operate = source["operate"];

internal/audio/devices.go

@@ -101,3 +101,30 @@ func endpointName(dev *wca.IMMDevice, fallback string) string {
 	}
 	return fallback
 }
+
+// DeviceName resolves an endpoint id to its friendly name.
+//
+// Diagnostics quote the id that was CONFIGURED, which is a GUID — an operator
+// told "no audio at all from {0.0.1.00000000}.{6a27abfd…}" learns nothing they
+// can act on, while "no audio at all from DAX RX 1 (FlexRadio DAX)" points
+// straight at the DAX panel.
+//
+// Falls back to the id when the endpoint cannot be found, which is itself worth
+// seeing: a device that has disappeared explains an empty recording too.
+func DeviceName(id string) string {
+	if id == "" {
+		return "(none)"
+	}
+	for _, list := range []func() ([]Device, error){ListInputDevices, ListOutputDevices} {
+		devs, err := list()
+		if err != nil {
+			continue
+		}
+		for _, d := range devs {
+			if d.ID == id {
+				return d.Name
+			}
+		}
+	}
+	return id
+}

internal/audio/engine.go

@@ -80,7 +80,17 @@ func pcmFormat() *wca.WAVEFORMATEX {
 	}
 }
 
-const autoConvert = wca.AUDCLNT_STREAMFLAGS_AUTOCONVERTPCM | wca.AUDCLNT_STREAMFLAGS_SRC_DEFAULT_QUALITY
+// autoConvert lets WASAPI resample between the device format and ours.
+//
+// SRC_DEFAULT_QUALITY used to be set alongside it, and that name is misleading:
+// it selects the CHEAP converter, meant for cases where quality does not matter.
+// Going from a rig 48 kHz stream down to our 16 kHz, it folds everything above
+// 8 kHz back into the audio band — and a receiver hiss is mostly high
+// frequencies. The result was a recording where the noise sat ON TOP of the
+// voice, while the same audio heard live had the voice well clear of it.
+//
+// Without the flag Windows uses its normal converter, which filters first.
+const autoConvert = wca.AUDCLNT_STREAMFLAGS_AUTOCONVERTPCM
 
 // recordPCM captures from a device into 16 kHz mono 16-bit PCM bytes until the
 // stop channel is closed.

internal/audio/manager.go

@@ -5,6 +5,7 @@ package audio
 import (
 	"fmt"
 	"sync"
+	"time"
 )
 
 // Manager owns the DVK record/playback lifecycle: at most one recording and
@@ -14,7 +15,18 @@ type Manager struct {
 	mu      sync.Mutex
 	recStop chan struct{}
 	recDone chan recResult
+	// monGainPct scales what the RX monitor plays, 100 = as captured.
+	//
+	// The "From radio" slider used to reach only the QSO recorder, so an
+	// operator listening through OpsLog heard no difference between 10% and
+	// 150% — the setting looked broken because it was, for the thing they were
+	// listening to.
+	monGainPct int
 	playStop   chan struct{}
+	// playDone closes when the playback goroutine has returned and the audio
+	// device is free again. Without it, the next Play raced the old one for the
+	// device and lost.
+	playDone chan struct{}
 	monStop  chan struct{} // RX monitor passthrough (capture → render)
 	monRing  *pcmRing      // live audio hand-off, also fed by the network stream
 	txStop   chan struct{} // TX audio passthrough (mic → rig)
@@ -125,18 +137,38 @@ func (m *Manager) Play(deviceID, path string, gainPct int) error {
 			pcm[i], pcm[i+1] = byte(uint16(v)), byte(uint16(v)>>8)
 		}
 	}
+	// Waits for any previous playback to have RELEASED THE DEVICE.
+	//
+	// It used to only signal the old one to stop and start a new one at once.
+	// The old goroutine still held the WASAPI render client for a moment, so the
+	// new client could not start: it returned immediately, the PTT was keyed and
+	// released a tenth of a second later, and nothing came out. On the air that
+	// looked like "press play again and you must wait the whole length of the
+	// message before it will play at all".
 	m.StopPlayback()
 	stop := make(chan struct{})
+	done := make(chan struct{})
 	m.mu.Lock()
 	m.playStop = stop
+	m.playDone = done
 	m.mu.Unlock()
 	go func() {
-		_ = playPCM(deviceID, pcm, rate, ch, bits, stop)
+		// The error was discarded. A device that refuses to start returns here
+		// instantly, the PTT is released 120 ms later, and NOTHING says why —
+		// which is exactly what a station heard as "it plays once, then never
+		// again": the call succeeded, the sound did not.
+		if err := playPCM(deviceID, pcm, rate, ch, bits, stop); err != nil {
+			LogSink("audio: playback on %q failed: %v", DeviceName(deviceID), err)
+		}
 		m.mu.Lock()
 		if m.playStop == stop {
 			m.playStop = nil
 		}
+		if m.playDone == done {
+			m.playDone = nil
+		}
 		m.mu.Unlock()
+		close(done) // the device is free from here
 		m.notify()
 	}()
 	m.notify()
@@ -147,12 +179,24 @@ func (m *Manager) Play(deviceID, path string, gainPct int) error {
 func (m *Manager) StopPlayback() {
 	m.mu.Lock()
 	stop := m.playStop
+	done := m.playDone
 	m.playStop = nil
 	m.mu.Unlock()
-	if stop != nil {
-		close(stop)
-		m.notify()
+	if stop == nil {
+		return
 	}
+	close(stop)
+	// Wait for the goroutine to release the device — that is the whole point of
+	// stopping before starting again. Bounded: a wedged WASAPI call must not
+	// freeze the caller, which here is the operator clicking a button.
+	if done != nil {
+		select {
+		case <-done:
+		case <-time.After(1500 * time.Millisecond):
+			LogSink("audio: previous playback did not release the device within 1.5 s")
+		}
+	}
+	m.notify()
 }
 
 // ---- RX audio monitor (Phase 2: USB codec passthrough) --------------------
@@ -188,9 +232,12 @@ func (m *Manager) startMonitor(inputDev, outputDev string, capture bool) error {
 	m.mu.Unlock()
 
 	if capture {
-		// Producer: capture the rig's USB audio into the ring.
+		// Producer: capture the rig's USB audio into the ring, at the level the
+		// operator set. Applied HERE rather than on the render side so the
+		// network-fed path (PushMonitorAudio) keeps its own untouched levels —
+		// that stream is already scaled by the radio.
 		go func() {
-			_ = captureStream(inputDev, stop, func(chunk []byte) { ring.Push(chunk) })
+			_ = captureStream(inputDev, stop, func(chunk []byte) { ring.Push(m.scaleMonitor(chunk)) })
 		}()
 	}
 	// Consumer: render the ring to the output device at the internal 16 kHz mono.
@@ -201,6 +248,38 @@ func (m *Manager) startMonitor(inputDev, outputDev string, capture bool) error {
 	return nil
 }
 
+// SetMonitorGain sets the RX monitor level in percent (100 = as captured).
+// Takes effect on the next captured chunk — no need to restart the monitor.
+func (m *Manager) SetMonitorGain(pct int) {
+	if pct <= 0 {
+		pct = 100
+	}
+	m.mu.Lock()
+	m.monGainPct = pct
+	m.mu.Unlock()
+}
+
+// scaleMonitor applies the monitor level to one captured chunk, returning a
+// buffer the ring may keep. At unity it hands the chunk straight back: the
+// common case must not pay for a copy 30 times a second.
+func (m *Manager) scaleMonitor(chunk []byte) []byte {
+	m.mu.Lock()
+	pct := m.monGainPct
+	m.mu.Unlock()
+	if pct == 0 || pct == 100 {
+		return chunk
+	}
+	g := float64(pct) / 100
+	out := make([]byte, len(chunk))
+	copy(out, chunk)
+	for i := 0; i+1 < len(out); i += 2 {
+		v := int16(uint16(out[i]) | uint16(out[i+1])<<8)
+		v = scalePCM(v, g)
+		out[i], out[i+1] = byte(uint16(v)), byte(uint16(v)>>8)
+	}
+	return out
+}
+
 // StopMonitor stops the RX monitor passthrough.
 func (m *Manager) StopMonitor() {
 	m.mu.Lock()

internal/audio/mp3.go

@@ -3,6 +3,7 @@
 package audio
 
 import (
+	"math"
 	"os"
 
 	"github.com/braheezy/shine-mp3/pkg/mp3"
@@ -50,19 +51,81 @@ func writeMP3(path string, pcm []byte) error {
 	return enc.Write(f, stereo)
 }
 
-// upsample2 doubles the sample rate with linear interpolation (16 kHz → 32 kHz).
+// upsample2 doubles the sample rate, 16 kHz → 32 kHz, WITH the interpolation
+// filter that makes the operation legitimate.
+//
+// It used to interpolate linearly — each new sample the average of its
+// neighbours. That is an upsampler in name only: every component at f is
+// mirrored to 16 kHz − f, measured just 7 dB down (see the test). On speech it
+// adds brightness; on receiver noise, which is broadband, it lays a second
+// noise floor across the top of the band. Operators heard it as a hiss louder
+// than the voice, present in the MP3 and absent from the WAV of the very same
+// audio.
+//
+// Zero-stuffing followed by a windowed-sinc low-pass at the old Nyquist is the
+// textbook answer, and it puts the image below 40 dB. 63 taps is a few hundred
+// microseconds of work on an eight-second recording — nothing, next to the MP3
+// encode that follows.
 func upsample2(in []int16) []int16 {
 	if len(in) == 0 {
 		return in
 	}
 	out := make([]int16, len(in)*2)
-	for i := range in {
-		out[2*i] = in[i]
-		if i+1 < len(in) {
-			out[2*i+1] = int16((int32(in[i]) + int32(in[i+1])) / 2)
-		} else {
-			out[2*i+1] = in[i]
+	half := len(upsampleFIR) / 2
+	for i := range out {
+		var acc float64
+		// The zero-stuffed signal is non-zero only at even indices, so only
+		// every other tap contributes — the loop skips the zeros rather than
+		// multiplying by them.
+		start := (i - half + 1) &^ 1 // first even index in the window
+		for j := start; j <= i+half; j += 2 {
+			k := i - j + half
+			if k < 0 || k >= len(upsampleFIR) {
+				continue
 			}
+			src := j / 2
+			if src < 0 || src >= len(in) {
+				continue
+			}
+			acc += float64(in[src]) * upsampleFIR[k]
+		}
+		// ×2 for the energy lost to zero-stuffing, then clamp.
+		v := acc * 2
+		if v > 32767 {
+			v = 32767
+		} else if v < -32768 {
+			v = -32768
+		}
+		out[i] = int16(v)
 	}
 	return out
 }
+
+// upsampleFIR is a 63-tap Hamming-windowed sinc, cut off at a quarter of the
+// NEW rate (8 kHz at 32 kHz) — exactly the old Nyquist, which is where the
+// images begin.
+var upsampleFIR = func() []float64 {
+	const n = 63
+	const fc = 0.25 // cycles/sample at the new rate
+	h := make([]float64, n)
+	mid := (n - 1) / 2
+	var sum float64
+	for i := 0; i < n; i++ {
+		m := float64(i - mid)
+		var v float64
+		if m == 0 {
+			v = 2 * fc
+		} else {
+			v = math.Sin(2*math.Pi*fc*m) / (math.Pi * m)
+		}
+		// Hamming window: a rectangular one would ring and put the stopband
+		// only ~21 dB down, which is not enough to be worth the filter.
+		v *= 0.54 - 0.46*math.Cos(2*math.Pi*float64(i)/float64(n-1))
+		h[i] = v
+		sum += v
+	}
+	for i := range h {
+		h[i] /= sum // unity gain at DC
+	}
+	return h
+}()

internal/audio/peek_test.go

@@ -0,0 +1,56 @@
+package audio
+
+import (
+	"testing"
+	"time"
+)
+
+// Playing a stopped take must not consume it.
+//
+// Reported on the air: the recording plays once, then nothing — "as if it threw
+// the sound away after playing it". PeekQSO is what the playback reads, and it
+// is meant to COPY; TakeQSO is the one that clears.
+func TestPeekDoesNotConsumeTheTake(t *testing.T) {
+	r := &Recorder{running: true, active: true, paused: true, prerollSamples: sampleRate}
+	r.acc = make([]int16, 4000)
+	for i := range r.acc {
+		r.acc[i] = int16(i % 500)
+	}
+
+	first, err := r.PeekQSO()
+	if err != nil {
+		t.Fatalf("first peek: %v", err)
+	}
+	second, err := r.PeekQSO()
+	if err != nil {
+		t.Fatalf("second peek: %v — the take was consumed by the first", err)
+	}
+	if len(first) != len(second) {
+		t.Errorf("second peek returned %d bytes, first %d", len(second), len(first))
+	}
+
+	// And the copy must be independent: the caller holds these bytes while the
+	// recorder may still be appending to its own slice.
+	if len(first) > 0 {
+		first[0] = ^first[0]
+		again, _ := r.PeekQSO()
+		if len(again) > 0 && again[0] == first[0] {
+			t.Error("PeekQSO handed out its internal buffer, not a copy")
+		}
+	}
+
+	// Resuming and stopping again keeps everything captured so far.
+	r.ResumeQSO()
+	r.mu.Lock()
+	r.acc = append(r.acc, make([]int16, 1000)...)
+	r.mu.Unlock()
+	r.PauseQSO()
+	third, err := r.PeekQSO()
+	if err != nil {
+		t.Fatalf("peek after resume: %v", err)
+	}
+	if len(third) <= len(second) {
+		t.Errorf("after resuming, the take is %d bytes — it should have grown past %d", len(third), len(second))
+	}
+	_ = time.Now
+}

internal/audio/recorder.go

@@ -15,6 +15,14 @@ import (
 // Defaults to a no-op so the package is usable without wiring.
 var LogSink = func(string, ...any) {}
 
+// AlertSink receives the few audio problems an operator must see WHILE they are
+// operating, not afterwards in a log file — a capture device that opens but
+// never streams being the one that matters: the recording is silently empty and
+// nothing says so until the QSO is logged and gone.
+//
+// Set to a toast emitter at startup; a no-op keeps the package standalone.
+var AlertSink = func(string, ...any) {}
+
 // recoverGoroutine turns a panic in a long-running audio goroutine into a logged
 // event with a stack trace instead of a silent process-killing crash. (It can't
 // catch a hard Windows access violation from the WASAPI layer — those are fatal
@@ -45,6 +53,16 @@ type Recorder struct {
 	srcMu sync.Mutex
 	bufA  []int16 // From Radio
 	bufB  []int16 // mic
+	// When each source last delivered samples. A configured device that never
+	// produces anything is not an error anywhere — the capture call just sits
+	// there — so the only way to notice is to watch the clock.
+	lastA, lastB time.Time
+	// startedAt is when capture began — the reference for a source that has not
+	// delivered anything at all yet.
+	startedAt time.Time
+	// deadB (deadA) latches once a source has been declared silent, so the
+	// warning is logged once rather than 25 times a second.
+	deadA, deadB bool
 	twoSrc       bool
 	gainA        float64 // From Radio gain (1.0 = unity), guarded by srcMu
 	gainB        float64 // mic gain
@@ -52,6 +70,11 @@ type Recorder struct {
 	// Mixed output state (guarded by mu).
 	ring   []int16 // last prerollSamples of mixed audio
 	active bool
+	// paused freezes an ACTIVE take: nothing more is accumulated, but everything
+	// captured so far is kept and the take still ends normally when the QSO is
+	// logged. It is what lets an operator stop, play the recording back on the
+	// air to the station they are working, and still have it saved with the QSO.
+	paused bool
 	acc    []int16 // active QSO accumulation (seeded from ring on BeginQSO)
 }
 
@@ -110,11 +133,37 @@ func (r *Recorder) Start(fromDev, micDev string, prerollSec int) error {
 	if prerollSec < 0 {
 		prerollSec = 0
 	}
+	// Does the configured endpoint still EXIST?
+	//
+	// Endpoint ids are stored, and a DAX channel that is reconfigured, disabled
+	// or removed comes back with a different id. The old one then opens without
+	// complaint on some drivers and simply never streams — which is
+	// indistinguishable from a quiet band until the recording turns out empty.
+	// Checking the list takes milliseconds and answers it outright.
+	if devs, derr := ListInputDevices(); derr == nil {
+		known := func(id string) bool {
+			for _, d := range devs {
+				if d.ID == id {
+					return true
+				}
+			}
+			return false
+		}
+		if fromDev != "" && !known(fromDev) {
+			LogSink("recorder: the configured radio input no longer exists (%s) — re-select it in Settings → Audio", fromDev)
+			AlertSink("The configured radio audio input no longer exists — re-select it in Settings")
+		}
+		if micDev != "" && micDev != fromDev && !known(micDev) {
+			LogSink("recorder: the configured microphone no longer exists (%s) — re-select it in Settings → Audio", micDev)
+		}
+	}
 	r.prerollSamples = prerollSec * sampleRate
 	r.twoSrc = micDev != "" && micDev != fromDev
 	r.stopCh = make(chan struct{})
 	r.running = true
-	r.ring, r.acc, r.active, r.bufA, r.bufB = nil, nil, false, nil, nil
+	r.startedAt = time.Now()
+	r.ring, r.acc, r.active, r.paused, r.bufA, r.bufB = nil, nil, false, false, nil, nil
+	r.lastA, r.lastB, r.deadA, r.deadB = time.Time{}, time.Time{}, false, false
 	stop := r.stopCh
 	twoSrc := r.twoSrc
 	r.mu.Unlock()
@@ -124,27 +173,79 @@ func (r *Recorder) Start(fromDev, micDev string, prerollSec int) error {
 	go func() {
 		defer r.wg.Done()
 		defer recoverGoroutine("recorder capture (radio)")
-		_ = captureStream(fromDev, stop, func(chunk []byte) {
+		// The error was discarded here. A device that cannot be opened — renamed,
+		// unplugged, held by another program — then looked exactly like a device
+		// that is merely quiet, and the recording came out empty with nothing in
+		// the log to say why.
+		if err := captureStream(fromDev, stop, func(chunk []byte) {
 			s := bytesToInt16(chunk)
 			r.srcMu.Lock()
 			r.bufA = append(r.bufA, s...)
+			r.lastA = time.Now()
 			r.srcMu.Unlock()
-		})
+		}); err != nil {
+			LogSink("recorder: capture from %q failed: %v", DeviceName(fromDev), err)
+		}
 	}()
 	if twoSrc {
 		r.wg.Add(1)
 		go func() {
 			defer r.wg.Done()
 			defer recoverGoroutine("recorder capture (mic)")
-			_ = captureStream(micDev, stop, func(chunk []byte) {
+			if err := captureStream(micDev, stop, func(chunk []byte) {
 				s := bytesToInt16(chunk)
 				r.srcMu.Lock()
 				r.bufB = append(r.bufB, s...)
+				r.lastB = time.Now()
 				r.srcMu.Unlock()
-			})
+			}); err != nil {
+				LogSink("recorder: capture from %q failed: %v", DeviceName(micDev), err)
+			}
 		}()
 	}
 
+	// Name the devices being recorded FROM, once, at the start.
+	//
+	// A station with two radios has two sets of endpoints, and the recorder will
+	// happily capture the one that is not being listened to: the result is a
+	// file full of hiss with no relation to what the operator hears, and nothing
+	// anywhere said which receiver it came from.
+	if twoSrc {
+		LogSink("recorder: capturing %q + %q", DeviceName(fromDev), DeviceName(micDev))
+	} else {
+		LogSink("recorder: capturing %q", DeviceName(fromDev))
+	}
+
+	// Watchdog. A WASAPI device can open cleanly and then produce nothing at
+	// all — a DAX channel with no stream behind it does exactly that, and it is
+	// indistinguishable from silence until the recording turns out to be empty
+	// at the end of a QSO. Say it once, three seconds in, while there is still
+	// time to fix the setup.
+	r.wg.Add(1)
+	go func() {
+		defer r.wg.Done()
+		defer recoverGoroutine("recorder watchdog")
+		select {
+		case <-stop:
+			return
+		case <-time.After(3 * time.Second):
+		}
+		r.srcMu.Lock()
+		aQuiet, bQuiet := r.lastA.IsZero(), r.lastB.IsZero()
+		r.srcMu.Unlock()
+		if aQuiet {
+			LogSink("recorder: no audio at all from %q after 3 s — the device opened but nothing is streaming", DeviceName(fromDev))
+			AlertSink("No audio from %s — nothing is being recorded", DeviceName(fromDev))
+		}
+		// The mic is only worth a warning when the RADIO is silent too. On CW the
+		// mic channel legitimately delivers nothing, and the mixer has already
+		// said "recording the radio alone" — repeating it as an alarm made the log
+		// read as if something were broken while the recording was going fine.
+		if twoSrc && bQuiet && aQuiet {
+			LogSink("recorder: no audio at all from %q either", DeviceName(micDev))
+		}
+	}()
+
 	// Mixer goroutine.
 	r.wg.Add(1)
 	go func() {
@@ -166,15 +267,79 @@ func (r *Recorder) Start(fromDev, micDev string, prerollSec int) error {
 
 // mixTick drains the source queues, mixes what's available, and appends to the
 // ring + active accumulation.
+// deadSourceAfter is how long a source may deliver nothing before the recorder
+// carries on without it. Long enough not to trip on a scheduling hiccup, short
+// enough that almost nothing is lost from the source that IS working.
+const deadSourceAfter = 1500 * time.Millisecond
+
 func (r *Recorder) mixTick() {
 	r.srcMu.Lock()
 	var mixed []int16
 	if r.twoSrc {
+		// A source that has been silent for a while is treated as ABSENT and the
+		// other one is recorded alone.
+		//
+		// Two sources used to mean min(len(A), len(B)) samples: if one device
+		// delivered nothing, NOTHING was recorded, and the drift guard below
+		// then threw the live source away a second at a time. That is exactly
+		// what happened on a Flex in CW — DAX Mic delivers nothing when the mic
+		// path is not running — and the operator got "recording was empty" after
+		// a whole QSO. Half a recording is worth having; silence is not.
+		now := time.Now()
+		// A source is dry when it has been quiet for too long — and a source that
+		// has NEVER delivered is measured from when capture started, because it
+		// has no last-delivery time of its own.
+		//
+		// The first version required a source to have spoken at least once. That
+		// covers a device that stops, but not the one that actually happens: a
+		// DAX Mic channel that is simply switched off never delivers a single
+		// sample, so it stayed "not yet dry" forever and took the whole recording
+		// down with it. Three empty CW recordings, with the radio audio streaming
+		// perfectly the entire time.
+		dry := func(last time.Time) bool {
+			if last.IsZero() {
+				return now.Sub(r.startedAt) > deadSourceAfter
+			}
+			return now.Sub(last) > deadSourceAfter
+		}
+		aDry, bDry := dry(r.lastA), dry(r.lastB)
+		if bDry && !aDry && len(r.bufA) > 0 {
+			if !r.deadB {
+				r.deadB = true
+				LogSink("recorder: the second audio source is silent — recording the radio alone")
+			}
+			mixed = make([]int16, len(r.bufA))
+			for i, v := range r.bufA {
+				mixed[i] = scaleSample(v, r.gainA)
+			}
+			r.bufA = r.bufA[:0]
+			r.bufB = r.bufB[:0]
+			r.srcMu.Unlock()
+			r.store(mixed)
+			return
+		}
+		if aDry && !bDry && len(r.bufB) > 0 {
+			if !r.deadA {
+				r.deadA = true
+				LogSink("recorder: the radio audio source is silent — recording the microphone alone")
+			}
+			mixed = make([]int16, len(r.bufB))
+			for i, v := range r.bufB {
+				mixed[i] = scaleSample(v, r.gainB)
+			}
+			r.bufA = r.bufA[:0]
+			r.bufB = r.bufB[:0]
+			r.srcMu.Unlock()
+			r.store(mixed)
+			return
+		}
 		n := len(r.bufA)
 		if len(r.bufB) < n {
 			n = len(r.bufB)
 		}
 		if n > 0 {
+			// Both alive again after one was written off.
+			r.deadA, r.deadB = false, false
 			mixed = make([]int16, n)
 			for i := 0; i < n; i++ {
 				mixed[i] = clampSum(scaleSample(r.bufA[i], r.gainA), scaleSample(r.bufB[i], r.gainB))
@@ -182,13 +347,21 @@ func (r *Recorder) mixTick() {
 			r.bufA = append(r.bufA[:0], r.bufA[n:]...)
 			r.bufB = append(r.bufB[:0], r.bufB[n:]...)
 		}
-		// Drift guard: if the clocks diverge, drop the excess so the two
-		// sources stay roughly aligned (≤1 s skew).
+		// Drift guard: two sound cards run on their own clocks, so drop the
+		// excess to keep them within a second of each other.
+		//
+		// ONLY while both are actually running. A starved source is not drift: it
+		// made this guard throw away the radio audio a second at a time during
+		// the grace period, so the opening of every recording was lost even
+		// though it had been captured. Waiting costs nothing now — whatever is
+		// buffered is written whole the moment the silent source is written off.
+		if len(r.bufA) > 0 && len(r.bufB) > 0 {
 			if d := len(r.bufA) - len(r.bufB); d > sampleRate {
 				r.bufA = append(r.bufA[:0], r.bufA[d:]...)
 			} else if d < -sampleRate {
 				r.bufB = append(r.bufB[:0], r.bufB[-d:]...)
 			}
+		}
 	} else if len(r.bufA) > 0 {
 		mixed = make([]int16, len(r.bufA))
 		for i, s := range r.bufA {
@@ -198,6 +371,12 @@ func (r *Recorder) mixTick() {
 	}
 	r.srcMu.Unlock()
 
+	r.store(mixed)
+}
+
+// store appends mixed samples to the pre-roll ring and, when a take is running,
+// to the take itself.
+func (r *Recorder) store(mixed []int16) {
 	if len(mixed) == 0 {
 		return
 	}
@@ -206,7 +385,7 @@ func (r *Recorder) mixTick() {
 	if len(r.ring) > r.prerollSamples {
 		r.ring = append(r.ring[:0], r.ring[len(r.ring)-r.prerollSamples:]...)
 	}
-	if r.active {
+	if r.active && !r.paused {
 		r.acc = append(r.acc, mixed...)
 	}
 	r.mu.Unlock()
@@ -221,7 +400,7 @@ func (r *Recorder) BeginQSO() {
 		return
 	}
 	r.acc = append([]int16(nil), r.ring...)
-	r.active = true
+	r.active, r.paused = true, false
 }
 
 // RestartQSO begins a fresh accumulation even if one is already active —
@@ -236,7 +415,7 @@ func (r *Recorder) RestartQSO() {
 		return
 	}
 	r.acc = append([]int16(nil), r.ring...)
-	r.active = true
+	r.active, r.paused = true, false
 }
 
 // ResetQSOClock restarts the active accumulation from ZERO — discarding
@@ -266,7 +445,7 @@ func (r *Recorder) TakeQSO() ([]byte, error) {
 		return nil, fmt.Errorf("no active recording")
 	}
 	samples := r.acc
-	r.acc, r.active = nil, false
+	r.acc, r.active, r.paused = nil, false, false
 	r.mu.Unlock()
 	if len(samples) == 0 {
 		return nil, fmt.Errorf("recording was empty")
@@ -295,7 +474,7 @@ func (r *Recorder) SaveQSO(path string) error {
 // DiscardQSO drops the active accumulation without saving (callsign cleared).
 func (r *Recorder) DiscardQSO() {
 	r.mu.Lock()
-	r.acc, r.active = nil, false
+	r.acc, r.active, r.paused = nil, false, false
 	r.mu.Unlock()
 }
 
@@ -313,7 +492,7 @@ func (r *Recorder) Stop() {
 	close(stop)
 	r.wg.Wait()
 	r.mu.Lock()
-	r.ring, r.acc, r.active = nil, nil, false
+	r.ring, r.acc, r.active, r.paused = nil, nil, false, false
 	r.mu.Unlock()
 	r.srcMu.Lock()
 	r.bufA, r.bufB = nil, nil
@@ -346,3 +525,55 @@ func int16sToBytes(s []int16) []byte {
 	}
 	return b
 }
+
+// PauseQSO freezes the active take without ending it: nothing more is recorded,
+// nothing is thrown away, and logging the QSO still writes the file.
+//
+// This exists for one situation, which is common enough on the bands to be
+// worth the state: you are working a station, you have been recording, and they
+// ask to hear it. You stop, you play it back to them on the air, and the
+// recording is still saved with the QSO afterwards.
+func (r *Recorder) PauseQSO() bool {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if !r.active {
+		return false
+	}
+	r.paused = true
+	return true
+}
+
+// ResumeQSO continues an interrupted take, appending to what is already there.
+func (r *Recorder) ResumeQSO() bool {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if !r.active {
+		return false
+	}
+	r.paused = false
+	return true
+}
+
+// Paused reports whether the active take is frozen.
+func (r *Recorder) Paused() bool {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	return r.active && r.paused
+}
+
+// PeekQSO returns what has been captured so far WITHOUT ending the take.
+//
+// Unlike TakeQSO this keeps the audio, because the take is going to be played
+// back and then still saved with the QSO. The copy is deliberate: the caller
+// gets bytes it can hold while the recorder keeps appending to its own slice.
+func (r *Recorder) PeekQSO() ([]byte, error) {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if !r.active {
+		return nil, fmt.Errorf("no active recording")
+	}
+	if len(r.acc) == 0 {
+		return nil, fmt.Errorf("recording is empty")
+	}
+	return int16sToBytes(append([]int16(nil), r.acc...)), nil
+}

internal/audio/recorder_deadsource_test.go

@@ -0,0 +1,123 @@
+package audio
+
+import (
+	"testing"
+	"time"
+)
+
+// A silent second source must not silence the recording.
+//
+// From a real session: a Flex with "From Radio" on DAX RX and "Recording mic"
+// on DAX Mic. In CW the mic path does not run, so DAX Mic delivered nothing —
+// and because the mixer took min(len(A), len(B)) samples, nothing at all was
+// recorded. The whole QSO ended in "recording was empty".
+func TestMixerSurvivesASilentSource(t *testing.T) {
+	r := &Recorder{twoSrc: true, gainA: 1, gainB: 1, running: true, active: true, prerollSamples: sampleRate}
+
+	// The radio has been talking; the mic has not spoken for well over the
+	// grace period.
+	r.bufA = make([]int16, 800)
+	for i := range r.bufA {
+		r.bufA[i] = 1000
+	}
+	r.lastA = time.Now()
+	r.lastB = time.Now().Add(-5 * time.Second)
+
+	r.mixTick()
+
+	if len(r.acc) == 0 {
+		t.Fatal("nothing was recorded — a silent mic must not stop the radio being captured")
+	}
+	if r.acc[0] != 1000 {
+		t.Errorf("sample = %d, want 1000 — the live source must pass through unchanged", r.acc[0])
+	}
+}
+
+// While BOTH sources are alive the two are mixed, as before.
+func TestMixerStillMixesBothSources(t *testing.T) {
+	r := &Recorder{twoSrc: true, gainA: 1, gainB: 1, running: true, active: true, prerollSamples: sampleRate}
+	r.bufA = []int16{100, 100, 100}
+	r.bufB = []int16{50, 50, 50}
+	now := time.Now()
+	r.lastA, r.lastB = now, now
+
+	r.mixTick()
+
+	if len(r.acc) != 3 {
+		t.Fatalf("recorded %d samples, want 3", len(r.acc))
+	}
+	if r.acc[0] != 150 {
+		t.Errorf("sample = %d, want 150 — both sources should be summed", r.acc[0])
+	}
+}
+
+// Just after capture starts, a source that has not delivered yet is NOT written
+// off: the first samples take a moment to arrive, and declaring the mic dead at
+// once would drop the opening of every recording.
+func TestMixerWaitsBrieflyAtStartup(t *testing.T) {
+	r := &Recorder{twoSrc: true, gainA: 1, gainB: 1, running: true, active: true, prerollSamples: sampleRate}
+	r.startedAt = time.Now()
+	r.bufA = []int16{100, 100}
+
+	r.mixTick()
+
+	if len(r.acc) != 0 {
+		t.Errorf("recorded %d samples immediately — the second source deserves a moment to start", len(r.acc))
+	}
+}
+
+// A source that has NEVER delivered is written off once enough time has passed.
+//
+// This is the case that actually happens, and the one the first version missed:
+// a DAX Mic channel switched off delivers not one sample, so it had no
+// last-delivery time and stayed forever "not yet dry" — taking the whole
+// recording down with it while the radio audio streamed perfectly.
+func TestMixerWritesOffASourceThatNeverSpoke(t *testing.T) {
+	r := &Recorder{twoSrc: true, gainA: 1, gainB: 1, running: true, active: true, prerollSamples: sampleRate}
+	r.startedAt = time.Now().Add(-5 * time.Second)
+	r.bufA = []int16{700, 700, 700}
+	r.lastA = time.Now()
+	// lastB stays zero: the mic has never produced anything at all.
+
+	r.mixTick()
+
+	if len(r.acc) != 3 {
+		t.Fatalf("recorded %d samples, want 3 — the radio was streaming the whole time", len(r.acc))
+	}
+	if r.acc[0] != 700 {
+		t.Errorf("sample = %d, want 700", r.acc[0])
+	}
+}
+
+// Nothing captured during the grace period is thrown away.
+//
+// The drift guard exists for two sound cards running on their own clocks. A
+// STARVED source is not drift, and treating it as such discarded the radio
+// audio a second at a time while the mixer was still waiting for the mic — so
+// the opening of every CW recording was lost although it had been captured.
+func TestGracePeriodKeepsWhatWasCaptured(t *testing.T) {
+	r := &Recorder{twoSrc: true, gainA: 1, gainB: 1, running: true, active: true, prerollSamples: sampleRate}
+	r.startedAt = time.Now()
+
+	// Three seconds of radio audio arrive while the mic says nothing at all.
+	r.bufA = make([]int16, 3*sampleRate)
+	for i := range r.bufA {
+		r.bufA[i] = 500
+	}
+	r.lastA = time.Now()
+	r.mixTick() // still inside the grace period: nothing is written yet…
+
+	if len(r.acc) != 0 {
+		t.Fatalf("wrote %d samples before the mic was written off", len(r.acc))
+	}
+	if len(r.bufA) != 3*sampleRate {
+		t.Fatalf("buffered audio was trimmed to %d samples — it must be kept, not dropped", len(r.bufA))
+	}
+
+	// …and once the mic is written off, everything captured comes through.
+	r.startedAt = time.Now().Add(-5 * time.Second)
+	r.mixTick()
+	if len(r.acc) != 3*sampleRate {
+		t.Errorf("recorded %d samples, want the full %d captured during the wait", len(r.acc), 3*sampleRate)
+	}
+}

internal/audio/upsample_test.go

@@ -0,0 +1,79 @@
+package audio
+
+import (
+	"math"
+	"testing"
+)
+
+// goertzel returns the magnitude of one frequency bin, so a test can ask "how
+// much energy is at 10 kHz" without pulling in an FFT.
+func goertzel(x []int16, fs, freq float64) float64 {
+	w := 2 * math.Pi * freq / fs
+	c := 2 * math.Cos(w)
+	var s1, s2 float64
+	for _, v := range x {
+		s := float64(v) + c*s1 - s2
+		s2, s1 = s1, s
+	}
+	return math.Hypot(s1-s2*math.Cos(w), s2*math.Sin(w))
+}
+
+// Upsampling 16 kHz → 32 kHz must not create an audible mirror image.
+//
+// MP3 recordings came back with a hiss that is not on the air and is not in the
+// WAV of the same audio — "louder than the voice", from a station that hears the
+// voice well clear of the noise. The MP3 path is the only one that resamples,
+// and it did so by linear interpolation: every component at f is mirrored to
+// 16 kHz − f, which for broadband receiver noise means a second noise floor
+// spread across the top of the band.
+func TestUpsampleSuppressesTheImage(t *testing.T) {
+	const fs = 16000.0
+	const tone = 6000.0 // its image lands at 16000 − 6000 = 10 kHz
+
+	in := make([]int16, 4096)
+	for i := range in {
+		in[i] = int16(12000 * math.Sin(2*math.Pi*tone*float64(i)/fs))
+	}
+
+	out := upsample2(in)
+	if len(out) != 2*len(in) {
+		t.Fatalf("upsample2 returned %d samples for %d", len(out), len(in))
+	}
+
+	wanted := goertzel(out, 2*fs, tone)
+	image := goertzel(out, 2*fs, 2*fs-tone-16000) // = 10 kHz
+	if wanted == 0 {
+		t.Fatal("the tone itself did not survive upsampling")
+	}
+	db := 20 * math.Log10(image/wanted)
+	t.Logf("image at 10 kHz is %.1f dB below the 6 kHz tone", db)
+	if db > -35 {
+		t.Errorf("image only %.1f dB down — it is audible as added hiss; want at least 35 dB", db)
+	}
+}
+
+// The filter must not change the level, or every existing recording would come
+// back quieter (or clipped) after the fix — a second surprise on top of the one
+// being repaired.
+func TestUpsampleKeepsTheLevel(t *testing.T) {
+	const fs = 16000.0
+	in := make([]int16, 4096)
+	for i := range in {
+		in[i] = int16(10000 * math.Sin(2*math.Pi*1000*float64(i)/fs))
+	}
+	rms := func(x []int16) float64 {
+		var acc float64
+		for _, v := range x {
+			acc += float64(v) * float64(v)
+		}
+		return math.Sqrt(acc / float64(len(x)))
+	}
+	// Skip the filter's warm-up and tail, where the window is only partly fed.
+	out := upsample2(in)
+	got, want := rms(out[200:len(out)-200]), rms(in[100:len(in)-100])
+	ratio := got / want
+	t.Logf("level after upsampling: ×%.3f", ratio)
+	if ratio < 0.9 || ratio > 1.1 {
+		t.Errorf("level changed by ×%.3f — want within 10%%", ratio)
+	}
+}

internal/award/award.go

@@ -75,10 +75,22 @@ type Def struct {
 	LeadingStr  string    `json:"leading_str,omitempty"`  // strip this prefix before matching
 	TrailingStr string    `json:"trailing_str,omitempty"` // strip this suffix before matching
 	Dynamic     bool      `json:"dynamic,omitempty"`      // references not predefined (any value counts)
-	// NOTE: there is no "one reference per QSO" switch, and there was never any
-	// point in one. A QSO ALWAYS yields every reference its field holds — an n-fer
-	// POTA activation ("US-6544,US-0680"), a VUCC contact on a grid line. The old
-	// `Multi` flag was read by nothing; its checkbox changed nothing.
+	// OneRefPerQSO refuses an AMBIGUOUS match rather than guessing.
+	//
+	// This is not the old `Multi` flag, which was removed for good reason: a QSO
+	// always yields every reference its FIELD holds — an n-fer POTA activation
+	// ("US-6544,US-0680"), a VUCC contact on a grid line. That is several
+	// references, correctly.
+	//
+	// The case here is the opposite. The field holds ONE value and two entries in
+	// the reference list carry it: two German DOKs are both called "Gießen",
+	// because two clubs share the town. The matcher is not wrong, the data is
+	// ambiguous — and picking one would write a reference into the log that may
+	// well be the other. So on an award where a QSO can only ever count for one
+	// reference, an ambiguous match assigns NONE and the contact appears under
+	// "missing references", where the operator picks. Their choice then sticks:
+	// a manual reference overrides the matcher.
+	OneRefPerQSO bool `json:"one_ref_per_qso,omitempty"`
 
 	// OrRules are ordered FALLBACK searches for the primary one above: they are
 	// tried IN ORDER and only while nothing has matched yet — the first rule that
@@ -341,6 +353,12 @@ type Ref struct {
 	Worked    bool   `json:"worked"`
 	Confirmed bool   `json:"confirmed"`
 	Validated bool   `json:"validated"`
+	// Modes / ConfirmedModes are CLASSES, not ADIF modes: "CW", "PHONE",
+	// "DIGI". An operator asking "which entities have I worked on CW but not
+	// confirmed" does not care whether it was FT8 or RTTY on the digital side,
+	// and a list of twenty mode names would not answer the question they asked.
+	Modes          []string `json:"modes"`
+	ConfirmedModes []string `json:"confirmed_modes"`
 	Bands          []string `json:"bands"`
 	ConfirmedBands []string `json:"confirmed_bands"`
 	ValidatedBands []string `json:"validated_bands"`
@@ -360,11 +378,33 @@ type Result struct {
 	Error     string      `json:"error,omitempty"` // e.g. bad regexp pattern
 }
 
+// ModeClass sorts an ADIF mode into the three classes an operator thinks in:
+// CW, PHONE, DIGI. Anything unrecognised returns "" and is simply not counted
+// under any class — better than inventing one, since these classes drive a
+// filter that decides what the operator is shown.
+func ModeClass(mode string) string {
+	switch strings.ToUpper(strings.TrimSpace(mode)) {
+	case "CW", "CWR":
+		return "CW"
+	case "SSB", "USB", "LSB", "AM", "FM", "DV", "PHONE", "DIGITALVOICE":
+		return "PHONE"
+	case "":
+		return ""
+	}
+	// Everything else that a logbook actually carries is a data mode: FT8, FT4,
+	// RTTY, PSK31, JS8, Q65, MSK144, OLIVIA, VARA… Listing them exhaustively
+	// would mean a new mode silently vanishing from the filter the day it
+	// appears, which is worse than treating an unknown data mode as data.
+	return "DIGI"
+}
+
 // NameResolver optionally maps a (field, ref) pair to a human name. May be nil.
 type NameResolver func(field, ref string) string
 
 type refAgg struct {
 	bands          map[string]struct{}
+	modes          map[string]struct{}
+	confirmedModes map[string]struct{}
 	confirmedBands map[string]struct{}
 	validatedBands map[string]struct{}
 	anyConfirmed   bool
@@ -481,22 +521,33 @@ func Compute(defs []Def, qsos []qso.QSO, refMetas map[string][]RefMeta, nameOf N
 				continue
 			}
 			band := strings.ToLower(strings.TrimSpace(q.Band))
+			modeClass := ModeClass(q.Mode)
 			isConf := confirmed(q, d.Confirm)
 			isVal := confirmed(q, d.Validate)
 			for _, ref := range refs {
 				a := agg[i][ref]
 				if a == nil {
-					a = &refAgg{bands: map[string]struct{}{}, confirmedBands: map[string]struct{}{}, validatedBands: map[string]struct{}{}}
+					a = &refAgg{
+						bands: map[string]struct{}{}, confirmedBands: map[string]struct{}{},
+						validatedBands: map[string]struct{}{},
+						modes:          map[string]struct{}{}, confirmedModes: map[string]struct{}{},
+					}
 					agg[i][ref] = a
 				}
 				if band != "" {
 					a.bands[band] = struct{}{}
 				}
+				if modeClass != "" {
+					a.modes[modeClass] = struct{}{}
+				}
 				if isConf {
 					a.anyConfirmed = true
 					if band != "" {
 						a.confirmedBands[band] = struct{}{}
 					}
+					if modeClass != "" {
+						a.confirmedModes[modeClass] = struct{}{}
+					}
 				}
 				if isVal {
 					a.anyValidated = true
@@ -525,6 +576,7 @@ func Compute(defs []Def, qsos []qso.QSO, refMetas map[string][]RefMeta, nameOf N
 				r.Validated++
 			}
 			rf := Ref{Ref: ref, Worked: true, Confirmed: a.anyConfirmed, Validated: a.anyValidated,
+				Modes: setToSorted(a.modes), ConfirmedModes: setToSorted(a.confirmedModes),
 				Bands: setToSorted(a.bands), ConfirmedBands: setToSorted(a.confirmedBands), ValidatedBands: setToSorted(a.validatedBands)}
 			labelRef(&rf, d, ref, rl, hasList, nameOf)
 			r.Refs = append(r.Refs, rf)
@@ -819,6 +871,14 @@ type Explanation struct {
 	RefCount   int      `json:"ref_count"`             // size of that list
 	Steps      []Step   `json:"steps"`
 	Manual     []string `json:"manual,omitempty"` // references the operator assigned by hand
+	// Superseded is what the matcher had found before the operator's choice
+	// replaced it — shown in the trace so a correction is explainable rather
+	// than mysterious.
+	Superseded []string `json:"superseded,omitempty"`
+	// Ambiguous lists the references that matched when the award allows only one
+	// — none of them was kept. Shown so the operator sees WHICH ones to choose
+	// between rather than an unexplained blank.
+	Ambiguous []string `json:"ambiguous,omitempty"`
 	Result    []string `json:"result"` // what the QSO finally counts for
 }
 
@@ -937,8 +997,31 @@ func candidatesTrace(d *Def, re *regexp.Regexp, q *qso.QSO, rl refList, hasList
 	if ex != nil {
 		ex.Manual = manual
 	}
-	found = append(found, manual...)
+	// An operator's choice REPLACES what the matcher found. It does not join it.
+	//
+	// Adding to it was the behaviour, and it made a correction impossible: a
+	// German address matching two or three DOKs kept them all, so deleting the
+	// wrong ones and assigning the right one lasted exactly until the next
+	// recompute, which put them straight back. The operator was arguing with
+	// the matcher and could not win.
+	//
+	// One manual entry is stored per award (setOverrideRef drops the previous
+	// one), so this is an override in the storage as well as in the name.
+	if len(manual) > 0 {
+		if ex != nil {
+			ex.Superseded = dedupe(found)
+		}
+		found = manual
+	}
 	out := dedupe(found)
+	// Ambiguity is not a result. See OneRefPerQSO.
+	if d.OneRefPerQSO && len(manual) == 0 && len(out) > 1 {
+		if ex != nil {
+			ex.Ambiguous = out
+			ex.Result = []string{}
+		}
+		return nil
+	}
 	if ex != nil {
 		ex.Result = out
 	}

internal/award/modeclass_test.go

@@ -0,0 +1,28 @@
+package award
+
+import "testing"
+
+// The three classes an operator thinks in — the ones the awards filter offers.
+//
+// "Which entities have I worked on CW but not confirmed" is the question this
+// serves, so the classes must match how the question is asked: CW, phone, data.
+// Which data mode it was does not enter into it.
+func TestModeClass(t *testing.T) {
+	for _, c := range []struct{ mode, want string }{
+		{"CW", "CW"}, {"cw", "CW"}, {" CW ", "CW"}, {"CWR", "CW"},
+		{"SSB", "PHONE"}, {"USB", "PHONE"}, {"LSB", "PHONE"},
+		{"AM", "PHONE"}, {"FM", "PHONE"}, {"DV", "PHONE"},
+		{"FT8", "DIGI"}, {"FT4", "DIGI"}, {"RTTY", "DIGI"}, {"PSK31", "DIGI"},
+		{"JS8", "DIGI"}, {"Q65", "DIGI"}, {"OLIVIA", "DIGI"},
+		// A mode nobody has heard of yet is data, not nothing: the alternative
+		// is a new digital mode silently vanishing from the filter the day it
+		// appears.
+		{"SOMETHINGNEW", "DIGI"},
+		// No mode at all is not a class, and must not be counted as one.
+		{"", ""}, {"   ", ""},
+	} {
+		if got := ModeClass(c.mode); got != c.want {
+			t.Errorf("ModeClass(%q) = %q, want %q", c.mode, got, c.want)
+		}
+	}
+}

internal/award/override_test.go

@@ -0,0 +1,100 @@
+package award
+
+import (
+	"strings"
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// An operator's correction must survive a recompute.
+//
+// Reported on the DARC DOK award: a German address matches two or three DOKs,
+// the operator deletes the wrong ones and assigns the right one, and the next
+// recompute puts the wrong ones straight back. The manual reference was being
+// ADDED to what the matcher found instead of replacing it, so the correction
+// could never win.
+func TestManualReferenceReplacesTheMatch(t *testing.T) {
+	// An award that reads the address and matches a reference's description —
+	// the shape the DOK award uses, and the shape that over-matches.
+	def := Def{
+		Code: "DLD", Name: "DARC DOK", Field: "address",
+		MatchBy: "description", Type: "QSOFIELDS", Valid: true,
+	}
+	metas := []RefMeta{
+		{Code: "A01", Name: "Berlin", Valid: true},
+		{Code: "B05", Name: "Berlin Mitte", Valid: true},
+	}
+	// An address that legitimately matches both.
+	q := &qso.QSO{
+		Callsign: "DL2FDM",
+		Address:  "Berlin Mitte, 10115 Berlin",
+	}
+
+	auto := Explain(def, metas, q)
+	if len(auto.Result) < 2 {
+		t.Fatalf("the test needs an over-matching case; got %v", auto.Result)
+	}
+
+	// The operator picks the right one.
+	q.Extras = map[string]string{ManualRefsKey: "DLD@B05"}
+	fixed := Explain(def, metas, q)
+
+	if got := strings.Join(fixed.Result, ","); got != "B05" {
+		t.Errorf("after the correction the QSO counts for %q — want B05 alone", got)
+	}
+	if len(fixed.Superseded) == 0 {
+		t.Error("the trace does not say what the correction replaced")
+	}
+
+	// A QSO with no correction still gets everything the matcher found: the
+	// override must not disable matching for everyone else.
+	q2 := &qso.QSO{Callsign: "DL3XYZ", Address: "Berlin Mitte, 10115 Berlin"}
+	if len(Explain(def, metas, q2).Result) < 2 {
+		t.Error("an untouched QSO lost its automatic references")
+	}
+}
+
+// On an award where a QSO can only count for ONE reference, an ambiguous match
+// assigns none.
+//
+// Two DARC DOKs are called "Gießen" because two clubs share the town. Exact
+// matching finds both, and both are right as far as the matcher can tell.
+// Picking one would write a reference into the log that may well be the other —
+// so the contact is left for the operator, who now has the last word.
+func TestAmbiguousMatchIsRefusedWhenOnlyOneReferenceIsAllowed(t *testing.T) {
+	def := Def{
+		Code: "DLD", Name: "DARC DOK", Field: "qth",
+		MatchBy: "description", ExactMatch: true, Type: "QSOFIELDS", Valid: true,
+		OneRefPerQSO: true,
+	}
+	metas := []RefMeta{
+		{Code: "F07", Name: "Gießen", Valid: true},
+		{Code: "F61", Name: "Gießen", Valid: true},
+		{Code: "B11", Name: "Kassel", Valid: true},
+	}
+
+	amb := Explain(def, metas, &qso.QSO{Callsign: "DL2FDM", QTH: "Gießen"})
+	if len(amb.Result) != 0 {
+		t.Errorf("an ambiguous match produced %v — it should produce nothing", amb.Result)
+	}
+	if len(amb.Ambiguous) != 2 {
+		t.Errorf("the trace lists %v — it should name both candidates", amb.Ambiguous)
+	}
+
+	// An unambiguous one is untouched: this must not make the award stricter in
+	// general, only where the data genuinely does not decide.
+	ok := Explain(def, metas, &qso.QSO{Callsign: "DL3XYZ", QTH: "Kassel"})
+	if len(ok.Result) != 1 || ok.Result[0] != "B11" {
+		t.Errorf("an unambiguous QSO gave %v — want B11", ok.Result)
+	}
+
+	// And the operator's choice still wins over the ambiguity.
+	fixed := Explain(def, metas, &qso.QSO{
+		Callsign: "DL2FDM", QTH: "Gießen",
+		Extras: map[string]string{ManualRefsKey: "DLD@F61"},
+	})
+	if len(fixed.Result) != 1 || fixed.Result[0] != "F61" {
+		t.Errorf("after the operator picked F61 the QSO counts for %v", fixed.Result)
+	}
+}

internal/cat/flex.go

@@ -36,6 +36,11 @@ type Flex struct {
 	gotHandle  bool
 
 	slices map[int]*flexSlice
+	// pinnedSlice is the slice the operator chose IN OPSLOG (-1 = none). It
+	// overrides the radio's own "active" flag, and only an OpsLog click changes
+	// it — activating a slice on the radio's front panel or in SmartSDR does
+	// not, by design (see mainSliceLocked).
+	pinnedSlice   int
 	tx            flexTX               // transmit/ATU state pushed by the radio (FlexRadio tab)
 	amp           flexAmp              // external amplifier (PowerGenius XL) state
 	micProfiles   []string             // available mic profiles (SmartSDR "profile mic list")
@@ -183,6 +188,7 @@ func NewFlex(host string, port int, spotsEnabled bool) *Flex {
 		spotIdx: map[int]bool{}, pendingSpot: map[int]string{}, spotCall: map[int]string{}, spotByCall: map[string]int{}, pendingSplit: map[int]bool{},
 		meterMeta: map[int]meterInfo{}, meterVal: map[int]float64{}, meterSub: map[int]bool{},
 		sentCmds: map[int]string{}, txSetAt: map[string]time.Time{},
+		pinnedSlice: -1,
 	}
 }
 
@@ -308,7 +314,12 @@ func (f *Flex) send(cmd string) int {
 		debugLog.Printf("Flex: send %q failed: %v", cmd, err)
 		return 0
 	}
+	// Meter subscriptions are pure bookkeeping and a Flex announces meters one
+	// status line at a time — tracing each "sub meter N" wrote dozens of lines
+	// at every connect.
+	if !strings.HasPrefix(cmd, "sub meter ") {
 		debugLog.Printf("Flex: → %s", cmd)
+	}
 	return seq
 }
 
@@ -767,17 +778,11 @@ func (f *Flex) handleStatus(payload string) {
 				f.meterMeta[num] = old
 			}
 			f.mu.Unlock()
-			// One line for the whole batch, not one per meter: a Flex announces
-			// dozens at connect and that was a wall of text every time.
-			var names []string
+			// Not logged: the radio announces meters ONE per status line, so even
+			// a batched line meant dozens of them at every connect.
 			for _, id := range newIDs {
-				mi := f.meterMeta[id]
-				names = append(names, nonEmpty(mi.name, strconv.Itoa(id)))
 				f.subscribeMeter(id)
 			}
-			if len(names) > 0 {
-				debugLog.Printf("Flex: subscribed to %d meter(s): %s", len(names), strings.Join(names, " "))
-			}
 		}
 		// Spot status: "spot <index> …". Track the index so we can clear the
 		// panadapter, and log it verbatim — a click on a panadapter spot pushes a
@@ -968,7 +973,17 @@ func (f *Flex) mainSliceLocked() (int, *flexSlice) {
 	// map order returned a RANDOM active slice each call → the operating frequency
 	// flip-flopped 40m/20m every poll and the Ultrabeam motors chased it forever.
 	// Deterministic order = the lowest-indexed active slice wins, stably.
+	// An explicit choice made in OpsLog wins over everything, including the
+	// radio's active flag. It is dropped only when that slice stops being in
+	// use — a slice the operator closed is not a choice any more.
+	if f.pinnedSlice >= 0 {
+		if s := f.slices[f.pinnedSlice]; s != nil && s.inUse {
+			return f.pinnedSlice, s
+		}
+	}
+
 	firstInUse := -1
+	chosen := -1
 	for _, idx := range f.sortedSliceIdxLocked() {
 		s := f.slices[idx]
 		if !s.inUse {
@@ -978,12 +993,57 @@ func (f *Flex) mainSliceLocked() (int, *flexSlice) {
 			firstInUse = idx
 		}
 		if s.active {
+			chosen = idx
+			break
+		}
+	}
+	if chosen < 0 {
+		chosen = firstInUse
+	}
+	if chosen < 0 {
+		return -1, nil
+	}
+
+	// In SPLIT, stay on the RECEIVE slice.
+	//
+	// SmartSDR moves its "active" flag to the TX slice as soon as the transmit
+	// frequency is touched, so OpsLog followed the transmitter. But the operator
+	// is LISTENING to the DX on the other slice: the S-meter, the audio level,
+	// the filter and the DSP they are adjusting all belong there, and following
+	// the TX slice hands them the controls for a receiver they are not using.
+	//
+	// Only in split, and only when nothing was pinned above — clicking slice B
+	// in OpsLog still selects it and keeps it.
+	if txS := f.txSliceLocked(); txS != nil && f.slices[chosen] == txS {
+		if rxIdx, rxS := f.splitPartnerLocked(txS); rxS != nil {
+			return rxIdx, rxS
+		}
+	}
+	return chosen, f.slices[chosen]
+}
+
+// splitPartnerLocked returns the slice that FORMS A SPLIT with txS: in use, on
+// the same band, at a different frequency, in the same class (phone with phone,
+// CW with CW — so SSB alongside FT8 on one band is not a split).
+//
+// Lowest index first, so the answer is stable; map order is randomised in Go
+// and gave a different partner on each poll. Caller holds f.mu.
+func (f *Flex) splitPartnerLocked(txS *flexSlice) (int, *flexSlice) {
+	if txS == nil {
+		return -1, nil
+	}
+	bt := BandFromHz(txS.freqHz)
+	ct := flexSplitClass(txS.mode)
+	if bt == "" || ct == "" {
+		return -1, nil
+	}
+	for _, idx := range f.sortedSliceIdxLocked() {
+		s := f.slices[idx]
+		if s != nil && s.inUse && s != txS && s.freqHz != txS.freqHz &&
+			BandFromHz(s.freqHz) == bt && flexSplitClass(s.mode) == ct {
 			return idx, s
 		}
 	}
-	if firstInUse >= 0 {
-		return firstInUse, f.slices[firstInUse]
-	}
 	return -1, nil
 }
 
@@ -1089,6 +1149,11 @@ func (f *Flex) SetActiveSlice(idx int) error {
 	if !exists {
 		return fmt.Errorf("flex: no slice %d", idx)
 	}
+	// Remember it: this is the operator speaking, and it must survive the radio
+	// moving its own active flag to the transmitter during split.
+	f.mu.Lock()
+	f.pinnedSlice = idx
+	f.mu.Unlock()
 	f.send(fmt.Sprintf("slice s %d active=1", idx))
 	return nil
 }
@@ -1389,6 +1454,7 @@ func (f *Flex) FlexState() FlexTXState {
 		}
 	}
 	sort.Ints(sidx)
+	mainIdx, _ := f.mainSliceLocked()
 	for _, i := range sidx {
 		s := f.slices[i]
 		st.Slices = append(st.Slices, FlexSliceInfo{
@@ -1397,7 +1463,11 @@ func (f *Flex) FlexState() FlexTXState {
 			FreqHz: s.freqHz,
 			Mode:   flexModeToADIF(s.mode),
 			Band:   BandFromHz(s.freqHz),
-			Active: s.active,
+			// The slice OpsLog is working with, which is not always the one the
+			// radio has focused — in split OpsLog stays on RX. Reporting the
+			// radio's flag here would highlight one slice while every control
+			// acted on another.
+			Active: i == mainIdx,
 			TX:     s.tx,
 		})
 	}
@@ -2190,13 +2260,6 @@ func (f *Flex) subscribeMeter(id int) {
 	f.send(fmt.Sprintf("sub meter %d", id))
 }
 
-func nonEmpty(s, def string) string {
-	if s == "" {
-		return def
-	}
-	return s
-}
-
 func parseFloatDefault(s string, def float64) float64 {
 	if v, err := strconv.ParseFloat(strings.TrimSpace(s), 64); err == nil {
 		return v

internal/cat/flex_rxslice_test.go

@@ -0,0 +1,68 @@
+package cat
+
+import "testing"
+
+// In split, OpsLog stays on the RECEIVE slice.
+//
+// SmartSDR moves its "active" flag onto the TX slice as soon as the transmit
+// frequency is touched. Following it hands the operator the S-meter, audio
+// level, filter and DSP of a receiver they are not listening to — while the DX
+// they are working is on the other slice.
+func TestMainSliceStaysOnRXInSplit(t *testing.T) {
+	mk := func(hz int64, mode string, active, tx bool) *flexSlice {
+		return &flexSlice{freqHz: hz, mode: mode, active: active, tx: tx, inUse: true}
+	}
+
+	// Working a DX on 14.100, transmitting up on 14.200. The radio has focused
+	// the transmitter.
+	f := &Flex{pinnedSlice: -1, slices: map[int]*flexSlice{
+		0: mk(14_100_000, "USB", false, false), // where the DX is heard
+		1: mk(14_200_000, "USB", true, true),   // where we transmit, radio-focused
+	}}
+	idx, s := f.mainSliceLocked()
+	if idx != 0 || s == nil || s.freqHz != 14_100_000 {
+		t.Errorf("main slice = %d (%v Hz) — want slice 0, the RX side on 14.100", idx, s.freqHz)
+	}
+
+	// Simplex: the radio's focus is authoritative again, nothing to prefer.
+	f2 := &Flex{pinnedSlice: -1, slices: map[int]*flexSlice{
+		0: mk(14_100_000, "USB", false, false),
+		1: mk(14_200_000, "USB", true, true),
+	}}
+	f2.slices[0].inUse = false // only the TX slice is in use → simplex
+	if idx, _ := f2.mainSliceLocked(); idx != 1 {
+		t.Errorf("simplex main slice = %d, want 1 — the only slice in use", idx)
+	}
+
+	// Two same-band slices in DIFFERENT classes are not a split (SSB + FT8), so
+	// there is nothing to prefer and the radio's focus stands.
+	f3 := &Flex{pinnedSlice: -1, slices: map[int]*flexSlice{
+		0: mk(14_074_000, "DIGU", false, false),
+		1: mk(14_200_000, "USB", true, true),
+	}}
+	if idx, _ := f3.mainSliceLocked(); idx != 1 {
+		t.Errorf("SSB+FT8 main slice = %d, want 1 — that is not a split", idx)
+	}
+}
+
+// A slice picked IN OPSLOG wins over everything, including the split rule and
+// the radio's own focus. Picking one on the radio does not move OpsLog.
+func TestPinnedSliceWins(t *testing.T) {
+	mk := func(hz int64, mode string, active, tx bool) *flexSlice {
+		return &flexSlice{freqHz: hz, mode: mode, active: active, tx: tx, inUse: true}
+	}
+	f := &Flex{pinnedSlice: 1, slices: map[int]*flexSlice{
+		0: mk(14_100_000, "USB", true, false), // radio-focused
+		1: mk(14_200_000, "USB", false, true), // chosen in OpsLog
+	}}
+	if idx, _ := f.mainSliceLocked(); idx != 1 {
+		t.Errorf("main slice = %d — an explicit choice in OpsLog must win", idx)
+	}
+
+	// A pin on a slice that is no longer in use is not a choice any more: it
+	// must not strand OpsLog on a receiver that has been closed.
+	f.slices[1].inUse = false
+	if idx, _ := f.mainSliceLocked(); idx != 0 {
+		t.Errorf("main slice = %d — a closed slice cannot stay pinned", idx)
+	}
+}

internal/cat/icomserial.go

@@ -114,6 +114,15 @@ type IcomSerial struct {
 	silentGrace time.Duration // current width of that tolerance (backs off, see ReadState)
 	dspLoaded   bool          // readDSP has run since the rig became responsive (loads all
 	//                     the panel's set-once controls once the rig actually answers)
+	// When the console last asked for the DSP snapshot. The meters and the
+	// front-panel rotation are polled ONLY while something is displaying them:
+	// they are half of OpsLog's CI-V traffic, and on a shared bus — a microHAM
+	// Router splitting one CI-V link into two virtual ports, OpsLog on one and
+	// WSJT-X/MSHV on the other — every frame we don't need is a frame that can
+	// collide with the other program's.
+	dspWantMu sync.Mutex
+	dspWantAt time.Time
+
 	lastSetFreq   int64 // last frequency commanded (spot click: freq then mode)
 	lastSetFreqAt time.Time
 
@@ -409,9 +418,18 @@ func (b *IcomSerial) ReadState() (RigState, error) {
 	}
 
 	// Live meters + TX state for the Icom panel (the rig doesn't push these).
+	// The meters are polled only while the console is actually on screen: they
+	// were three CI-V round trips per cycle, every cycle, whether or not anyone
+	// could see them. The previous readings are kept so the panel opens on the
+	// last known values rather than on zeros.
 	tx := b.readTX()
-	sm, _ := b.readMeter(civ.SubMeterS)
-	po, swr := 0, 0
+	watched := b.panelWatched()
+	b.dspMu.Lock()
+	sm, po, swr := b.dsp.SMeter, b.dsp.PowerMeter, b.dsp.SWRMeter
+	b.dspMu.Unlock()
+	if watched {
+		sm, _ = b.readMeter(civ.SubMeterS)
+		po, swr = 0, 0
 		if tx {
 			if v, ok := b.readMeter(civ.SubMeterPo); ok {
 				po = v
@@ -420,6 +438,7 @@ func (b *IcomSerial) ReadState() (RigState, error) {
 				swr = v
 			}
 		}
+	}
 	b.dspMu.Lock()
 	b.dsp.Available = true
 	b.dsp.Model = b.model
@@ -434,12 +453,16 @@ func (b *IcomSerial) ReadState() (RigState, error) {
 	// snapshot so the panel's antenna, sliders, RIT, notch, etc. reflect the rig
 	// instead of sitting at their zero defaults. Runs once; ↻ Refresh re-reads on
 	// demand, and a reconnect re-arms it (Connect clears dspLoaded).
+	// Both of these only make sense for the console — don't spend the bus on them
+	// while it is closed. The snapshot then loads the first time it is opened.
+	if watched {
 		if !b.dspLoaded {
 			b.readDSP()
 			b.dspLoaded = true
 		} else {
 			b.refreshFrontPanel()
 		}
+	}
 	return s, nil
 }
 
@@ -532,12 +555,25 @@ func (b *IcomSerial) SetPower(on bool) error {
 		return fmt.Errorf("icom: not connected")
 	}
 	if on {
-		buf := make([]byte, 0, 32)
-		for i := 0; i < 25; i++ {
+		// The preamble has to last long enough IN TIME for the sleeping rig to
+		// notice it, so its length scales with the baud rate — Icom's own table
+		// asks for 7 bytes at 4800 baud and 150 at 115200, which is a fixed
+		// ~25 ms of carrier. A flat 25 bytes (what this sent before) is right at
+		// 19200 and far too short above it, so a rig configured for 115200 simply
+		// ignored the command.
+		n := b.baud / 768
+		if n < 7 {
+			n = 7
+		} else if n > 150 {
+			n = 150
+		}
+		buf := make([]byte, 0, n+8)
+		for i := 0; i < n; i++ {
 			buf = append(buf, 0xFE)
 		}
 		buf = append(buf, 0xFE, 0xFE, b.rigAddr, civ.AddrController, civ.CmdPower, 0x01, 0xFD)
 		_, err := b.port.Write(buf)
+		applog.Printf("icom: power ON — %d-byte wake preamble at %d baud, addr 0x%02X (err=%v)", n, b.baud, b.rigAddr, err)
 		return err
 	}
 	_, err := b.port.Write(civ.Frame(b.rigAddr, civ.AddrController, civ.CmdPower, 0x00))
@@ -1289,11 +1325,26 @@ func (b *IcomSerial) modeCode(mode string) (code byte, data bool, err error) {
 // ── IcomController: receive-DSP controls for the Icom tab ───────────────────
 
 func (b *IcomSerial) IcomState() IcomTXState {
+	// Asking for the snapshot is what marks the console as being watched, which
+	// is what re-enables the meter polling in ReadState.
+	b.dspWantMu.Lock()
+	b.dspWantAt = time.Now()
+	b.dspWantMu.Unlock()
+
 	b.dspMu.Lock()
 	defer b.dspMu.Unlock()
 	return b.dsp
 }
 
+// panelWatched reports whether the Icom console asked for the DSP snapshot
+// recently — i.e. whether anything is on screen to read the meters.
+func (b *IcomSerial) panelWatched() bool {
+	b.dspWantMu.Lock()
+	at := b.dspWantAt
+	b.dspWantMu.Unlock()
+	return !at.IsZero() && time.Since(at) < 3*time.Second
+}
+
 // RefreshIcom re-reads the whole DSP snapshot from the rig. Runs on the CAT
 // goroutine (dispatched via IcomDo).
 func (b *IcomSerial) RefreshIcom() error {

internal/cat/kenwood.go

@@ -29,7 +29,10 @@ package cat
 // from the radio, and the rig file decides what a "Freq" property means.
 
 import (
+	"bytes"
+	"errors"
 	"fmt"
+	"net"
 	"strconv"
 	"strings"
 	"sync"
@@ -43,17 +46,85 @@ import (
 type Kenwood struct {
 	portName string
 	baud     int
+	// host is "address:port" for a serial link reached over the network — a
+	// ser2net daemon, an Ethernet-serial adapter, a Raspberry Pi in the shack.
+	//
+	// This is NOT Kenwood's own network protocol. A TS-890 or TS-990 speaks
+	// KNS/ARCP over its Ethernet socket, with a session and authentication, and
+	// that is a different piece of work needing one of those radios to confirm
+	// it. What this covers is the same CAT byte stream over a socket instead of
+	// a wire, which is how most operators actually put a rig on the network.
+	host    string
 	digital string // mode name logged for data (FT8 by default)
 
 	mu   sync.Mutex
 	port serial.Port
 
+	// dialPort, when set, replaces serial.Open. It exists so the backend can be
+	// driven against internal/catemu — which already SPEAKS this dialect to
+	// satisfy an ACOM amplifier — without a radio, a COM port or a null-modem
+	// pair. Written for a Kenwood backend nobody here owns a rig to test.
+	dialPort func() (serial.Port, error)
+
 	model     string
 	curFreq   int64
 	curRXFreq int64
 	curVFO    string // "A" or "B"
 	// Commands this rig answered "?;" to — asked once, then never again.
 	unsupported map[string]bool
+
+	// rx holds bytes read but not yet consumed, ACROSS calls to ask.
+	//
+	// It has to survive: a rig answers faster than we ask, so one Read often
+	// returns a whole reply plus the start of the next frame. When this buffer
+	// was local to ask, everything after the matched frame was dropped — half a
+	// frame included — and the link desynchronised permanently: every ask then
+	// found the PREVIOUS command's answer and timed out waiting for its own.
+	// That is the "discarding \" 000000000010000000;\" while waiting for IF"
+	// a TS-480 reported, followed by connected=false for ever.
+	rx []byte
+
+	// heard is whatever arrived during Connect that was not a reply we wanted.
+	// Kept only to put it in the error message: "not answering" and "answering
+	// something unreadable" are different faults with different fixes.
+	heard string
+
+	// lowerLines deasserts DTR and RTS after opening the port.
+	//
+	// Neither default is safe for everyone, which is why this is a setting and
+	// not a decision. Windows raises both lines on open: an interface that reads
+	// them as PTT then keys the rig for as long as OpsLog is running — reported
+	// as FT8 output power wandering, and gone the moment OpsLog was closed.
+	// Lowering them instead silences the radios whose USB-serial interface needs
+	// RTS asserted to transmit at all — a TS-990 that opened cleanly and answered
+	// nothing. Off by default: that is how this backend behaved for its whole
+	// life before the question came up.
+	lowerLines bool
+}
+
+// SetLowerLines chooses whether DTR and RTS are deasserted on connect. Set
+// before Connect.
+func (k *Kenwood) SetLowerLines(v bool) {
+	k.mu.Lock()
+	k.lowerLines = v
+	k.mu.Unlock()
+}
+
+// where names the link for a message, so an error does not read "COM @ 0 baud"
+// after a network connect.
+func (k *Kenwood) where() string {
+	if k.host != "" {
+		return k.host
+	}
+	return k.portName
+}
+
+// NewKenwoodTCP builds a backend that reaches the rig over a socket instead of
+// a COM port (ser2net and friends).
+func NewKenwoodTCP(hostPort, digital string) *Kenwood {
+	k := NewKenwood("", 0, digital)
+	k.host = strings.TrimSpace(hostPort)
+	return k
 }
 
 func NewKenwood(portName string, baud int, digital string) *Kenwood {
@@ -71,8 +142,8 @@ func (k *Kenwood) Name() string { return "kenwood" }
 func (k *Kenwood) Connect() error {
 	k.mu.Lock()
 	defer k.mu.Unlock()
-	if k.portName == "" {
-		return fmt.Errorf("kenwood: no serial port configured")
+	if k.portName == "" && k.host == "" {
+		return fmt.Errorf("kenwood: no serial port or network address configured")
 	}
 	// Close any handle still held before opening another: Connect runs again on
 	// every reconnect, and Windows opens a serial port exclusively, so a leaked
@@ -82,8 +153,11 @@ func (k *Kenwood) Connect() error {
 		_ = k.port.Close()
 		k.port = nil
 	}
-	p, err := serial.Open(k.portName, &serial.Mode{BaudRate: k.baud})
+	p, err := k.openPort()
 	if err != nil {
+		if k.host != "" {
+			return fmt.Errorf("kenwood: connect %s: %w", k.host, err)
+		}
 		return fmt.Errorf("kenwood: open %s @ %d baud: %w", k.portName, k.baud, err)
 	}
 	p.SetReadTimeout(300 * time.Millisecond)
@@ -94,6 +168,14 @@ func (k *Kenwood) Connect() error {
 	// request/response pairs and make a reply impossible to attribute. We poll.
 	_ = k.write("AI0;")
 
+	// Start from silence. A reconnect inherits whatever the rig said last —
+	// unsolicited frames sent before AI0 landed, the tail of an answer nobody
+	// read — and one stale frame is enough to leave every ask one reply behind
+	// its question for the rest of the session.
+	k.rx = nil
+	k.drain(250 * time.Millisecond)
+	k.heard = ""
+
 	answered := false
 	if id, err := k.ask("ID;"); err == nil && strings.HasPrefix(id, "ID") {
 		answered = true
@@ -112,9 +194,31 @@ func (k *Kenwood) Connect() error {
 	}
 	if !answered {
 		k.model = ""
-		return fmt.Errorf("kenwood: %s opened but the rig is not answering — check that it is switched on and set to %d baud", k.portName, k.baud)
+		if k.heard == "" && len(k.rx) > 0 {
+			k.heard = string(k.rx) // an unterminated fragment is evidence too
 		}
+		// Distinguish silence from noise. "The rig is not answering" sent an
+		// operator checking the power switch and the baud rate on a radio that was
+		// visibly talking — its frames were arriving, they just did not match what
+		// was asked (wrong baud garbles them; an interface echoing our own
+		// commands back produces the same). Say which of the two it is, and quote
+		// what came back, because that is the fact that decides where to look.
+		if seen := k.heard; seen != "" {
+			return fmt.Errorf("kenwood: %s is sending data but no reply to ID; or IF; — got %q. Check the baud rate (set to %d here) and that nothing else is echoing the port", k.where(), seen, k.baud)
+		}
+		if k.host != "" {
+			return fmt.Errorf("kenwood: %s accepted the connection but the rig sent nothing — check that the serial bridge points at the radio and that the radio is switched on", k.host)
+		}
+		return fmt.Errorf("kenwood: %s opened but the rig sent nothing — check that it is switched on and set to %d baud", k.portName, k.baud)
+	}
+	// Name what was actually connected to. A log reading "connected on  @ 0 baud"
+	// after a network connect is the kind of line that sends someone hunting a
+	// serial fault that does not exist.
+	if k.host != "" {
+		debugLog.Printf("kenwood: connected to %s (network serial bridge), model=%q", k.host, k.model)
+	} else {
 		debugLog.Printf("kenwood: connected on %s @ %d baud, model=%q", k.portName, k.baud, k.model)
+	}
 	return nil
 }
 
@@ -154,6 +258,34 @@ func (k *Kenwood) ReadState() (RigState, error) {
 	// IF reports the frequency of the VFO in USE (what the operator hears).
 	rx := f.FreqHz
 	tx := rx
+
+	// IF's split bit is not filled in by every rig that speaks this dialect —
+	// reported on a Flex through its Kenwood CAT emulation, where the frequency
+	// reads perfectly and split never appears. So ask the question directly as
+	// well: split IS "the transmit VFO differs from the receive VFO", which is
+	// what FR/FT answer, and it is the same rule the Yaesu backend settled on.
+	//
+	// A rig that rejects FR/FT answers "?;" once and is never asked again, so
+	// this costs two short commands per poll only where it actually works.
+	split := f.Split
+	if !split {
+		rxv, rxOK := k.askVFO("FR;")
+		txv, txOK := k.askVFO("FT;")
+		if rxOK && txOK && rxv != txv {
+			split = true
+			// Trust FR over IF for which VFO is in use: they were asked in the
+			// same breath, and a rig that leaves the split bit empty may be just
+			// as vague about the VFO field.
+			// f.VFO too, not just the reported state: the block below picks the
+			// TRANSMIT VFO as "the other one" from f.VFO, and leaving the two
+			// disagreeing would read the transmit frequency off the wrong dial.
+			if rxv == "A" || rxv == "B" {
+				k.curVFO, s.Vfo, f.VFO = rxv, rxv, rxv
+			}
+		}
+	}
+	f.Split = split
+
 	if f.Split {
 		// The transmit VFO is the other one. Read it rather than assume, and fall
 		// back to simplex if it cannot be read: a wrong TX frequency is written
@@ -229,10 +361,28 @@ func (k *Kenwood) write(cmd string) error {
 	if k.port == nil {
 		return fmt.Errorf("kenwood: not connected")
 	}
+	traceText("kenwood", "TX", cmd)
 	_, err := k.port.Write([]byte(cmd))
 	return err
 }
 
+// drain reads and throws away whatever the rig has already sent, until it stays
+// quiet for one read timeout or the budget runs out.
+func (k *Kenwood) drain(budget time.Duration) {
+	if k.port == nil {
+		return
+	}
+	tmp := make([]byte, 256)
+	deadline := time.Now().Add(budget)
+	for time.Now().Before(deadline) {
+		n, err := k.port.Read(tmp)
+		if err != nil || n == 0 {
+			return // an error here is not interesting: we are throwing this away
+		}
+		traceText("kenwood", "RX-drop", string(tmp[:n]))
+	}
+}
+
 // ask sends a query and returns the reply belonging to THAT command. Anything
 // else on the wire is discarded: a stray frame parsed as a frequency reads as
 // "lost the rig" to the Manager, which then reconnects — the CAT link dropping
@@ -245,25 +395,19 @@ func (k *Kenwood) ask(cmd string) (string, error) {
 	if err := k.write(cmd); err != nil {
 		return "", err
 	}
-	buf := make([]byte, 0, 64)
 	tmp := make([]byte, 64)
 	deadline := time.Now().Add(600 * time.Millisecond)
-	for time.Now().Before(deadline) {
-		n, err := k.port.Read(tmp)
-		if err != nil {
-			return "", err
-		}
-		if n == 0 {
-			continue // read timeout — the rig may still be composing its answer
-		}
-		buf = append(buf, tmp[:n]...)
 	for {
-			i := strings.IndexByte(string(buf), ';')
+		// Consume whatever is already buffered BEFORE reading more: the answer
+		// may have arrived attached to the previous one.
+		for {
+			i := bytes.IndexByte(k.rx, ';')
 			if i < 0 {
 				break
 			}
-			frame := string(buf[:i+1])
-			buf = buf[i+1:]
+			frame := string(k.rx[:i+1])
+			k.rx = k.rx[i+1:]
+			traceText("kenwood", "RX", frame)
 			if frame == "?;" {
 				// The rig rejected the command. Remember it so the poll loop stops
 				// paying a 600 ms timeout for it on every cycle.
@@ -275,10 +419,26 @@ func (k *Kenwood) ask(cmd string) (string, error) {
 				return frame, nil
 			}
 			debugLog.Printf("kenwood: discarding %q while waiting for %s", frame, want)
+			// Remember the first unexpected frame: if the whole handshake fails, this
+			// is what tells the operator the radio was talking after all.
+			if k.heard == "" {
+				k.heard = frame
 			}
 		}
+		if !time.Now().Before(deadline) {
 			return "", fmt.Errorf("kenwood: timeout answering %q", cmd)
 		}
+		n, err := k.port.Read(tmp)
+		if err != nil {
+			return "", err
+		}
+		if n > 0 {
+			k.rx = append(k.rx, tmp[:n]...)
+		}
+		// n == 0 is a read timeout, not silence for good: the rig may still be
+		// composing its answer.
+	}
+}
 
 // ── Frame parsing ──────────────────────────────────────────────────────────
 
@@ -407,7 +567,102 @@ var kenwoodModels = map[string]string{
 	"019": "TS-2000",
 	"020": "TS-480",
 	"021": "TS-590S",
+	// 022 reported by a real TS-990S in the field. Kenwood's documentation gives
+	// 024 for that radio, so both are kept: the observed value wins where they
+	// disagree, and neither maps to anything else.
+	"022": "TS-990S",
 	"023": "TS-590SG",
 	"024": "TS-990S",
 	"025": "TS-890S",
 }
+
+// openPort opens the serial link, or whatever dialPort provides in a test.
+func (k *Kenwood) openPort() (serial.Port, error) {
+	if k.dialPort != nil {
+		return k.dialPort()
+	}
+	if k.host != "" {
+		c, err := net.DialTimeout("tcp", k.host, 5*time.Second)
+		if err != nil {
+			return nil, err
+		}
+		return &tcpSerial{conn: c}, nil
+	}
+	p, err := serial.Open(k.portName, &serial.Mode{BaudRate: k.baud})
+	if err != nil {
+		return nil, err
+	}
+	// The modem lines are only touched when the operator asks for it. See
+	// lowerLines: both defaults break somebody's station.
+	if k.lowerLines {
+		_ = p.SetDTR(false)
+		_ = p.SetRTS(false)
+	}
+	return p, nil
+}
+
+// tcpSerial presents a TCP connection as a serial.Port, so the backend has one
+// code path whether the rig is on a wire or on the network.
+//
+// The modem-control methods are no-ops rather than errors: a bridge has no DTR
+// to raise, and failing them would break a caller that sets them defensively.
+type tcpSerial struct{ conn net.Conn }
+
+func (t *tcpSerial) Read(p []byte) (int, error) {
+	n, err := t.conn.Read(p)
+	// A read deadline expiring is this transport's "no data yet", exactly what a
+	// serial read timeout means to the caller — not a dead link. Reporting it as
+	// an error would make ask() abandon a rig that is merely thinking.
+	if err != nil {
+		var ne net.Error
+		if errors.As(err, &ne) && ne.Timeout() {
+			return n, nil
+		}
+	}
+	return n, err
+}
+func (t *tcpSerial) Write(p []byte) (int, error) { return t.conn.Write(p) }
+func (t *tcpSerial) Close() error                { return t.conn.Close() }
+func (t *tcpSerial) SetReadTimeout(d time.Duration) error {
+	if d <= 0 {
+		return t.conn.SetReadDeadline(time.Time{})
+	}
+	return t.conn.SetReadDeadline(time.Now().Add(d))
+}
+func (t *tcpSerial) SetMode(*serial.Mode) error { return nil }
+func (t *tcpSerial) Drain() error               { return nil }
+func (t *tcpSerial) ResetInputBuffer() error    { return nil }
+func (t *tcpSerial) ResetOutputBuffer() error   { return nil }
+func (t *tcpSerial) SetDTR(bool) error          { return nil }
+func (t *tcpSerial) SetRTS(bool) error          { return nil }
+func (t *tcpSerial) GetModemStatusBits() (*serial.ModemStatusBits, error) {
+	return &serial.ModemStatusBits{}, nil
+}
+func (t *tcpSerial) Break(time.Duration) error { return nil }
+
+// askVFO asks FR; or FT; and returns "A" or "B".
+//
+// The reply is FR0; / FR1; — the digit right after the two-letter command.
+// Anything else (a rig that answers with more fields, or not at all) returns
+// false, and the caller keeps whatever IF said rather than inventing a split.
+func (k *Kenwood) askVFO(cmd string) (string, bool) {
+	r, err := k.ask(cmd)
+	if err != nil {
+		return "", false
+	}
+	want := cmdPrefix(cmd)
+	body := strings.TrimSuffix(strings.TrimPrefix(r, want), ";")
+	if body == "" {
+		return "", false
+	}
+	switch body[0] {
+	case '0':
+		return "A", true
+	case '1':
+		return "B", true
+	}
+	// 2 is "sub receiver" on a TS-2000 — real, but not a VFO we track. Saying
+	// nothing is better than mapping it onto A or B and reporting a split that
+	// does not exist.
+	return "", false
+}

internal/cat/kenwood_loopback_test.go

@@ -0,0 +1,380 @@
+package cat
+
+import (
+	"fmt"
+	"strings"
+	"sync"
+	"testing"
+	"time"
+
+	"go.bug.st/serial"
+)
+
+// The Kenwood backend driven against a rig that answers, with no hardware.
+//
+// Nobody here owns a Kenwood, and a backend that has never completed a single
+// exchange is a guess however carefully it was written. But this repository
+// already contains the other half of the conversation: internal/catemu ANSWERS
+// this dialect, pretending to be a TS-2000 so an ACOM amplifier follows OpsLog.
+// The responder below replies exactly as catemu does — same FA/FB widths, same
+// 38-character IF layout, same ID019 — so the two halves are checked against
+// each other rather than against my reading of a manual.
+//
+// What this proves: the round trip completes, the model is identified, and
+// frequency, mode, VFO and split come back correct, including the second read
+// that split requires. What it cannot prove: that a real TS-590 answers on the
+// same timings, or that its firmware fills every IF field the way the
+// documentation says. Those still need a radio.
+
+// fakeSerial is one end of an in-memory serial link. Only Read and Write carry
+// meaning; the rest satisfy the interface.
+type fakeSerial struct {
+	mu      sync.Mutex
+	toRig   *strings.Builder // what the backend has written
+	fromRig []byte           // what the rig has queued for the backend
+	answer  func(cmd string) string
+	closed  bool
+}
+
+func (f *fakeSerial) Write(p []byte) (int, error) {
+	f.mu.Lock()
+	defer f.mu.Unlock()
+	if f.closed {
+		return 0, fmt.Errorf("closed")
+	}
+	f.toRig.Write(p)
+	// A rig answers as each terminated command arrives.
+	for {
+		s := f.toRig.String()
+		i := strings.IndexByte(s, ';')
+		if i < 0 {
+			break
+		}
+		cmd := s[:i+1]
+		rest := s[i+1:]
+		f.toRig.Reset()
+		f.toRig.WriteString(rest)
+		if r := f.answer(cmd); r != "" {
+			f.fromRig = append(f.fromRig, r...)
+		}
+	}
+	return len(p), nil
+}
+
+func (f *fakeSerial) Read(p []byte) (int, error) {
+	// A real port blocks until data or timeout; the backend polls, so returning
+	// (0, nil) on an empty buffer models a read timeout with no bytes.
+	for i := 0; i < 50; i++ {
+		f.mu.Lock()
+		if f.closed {
+			f.mu.Unlock()
+			return 0, fmt.Errorf("closed")
+		}
+		if len(f.fromRig) > 0 {
+			n := copy(p, f.fromRig)
+			f.fromRig = f.fromRig[n:]
+			f.mu.Unlock()
+			return n, nil
+		}
+		f.mu.Unlock()
+		time.Sleep(time.Millisecond)
+	}
+	return 0, nil
+}
+
+func (f *fakeSerial) Close() error {
+	f.mu.Lock()
+	defer f.mu.Unlock()
+	f.closed = true
+	return nil
+}
+
+func (f *fakeSerial) SetMode(*serial.Mode) error { return nil }
+func (f *fakeSerial) Drain() error               { return nil }
+func (f *fakeSerial) ResetInputBuffer() error    { return nil }
+func (f *fakeSerial) ResetOutputBuffer() error   { return nil }
+func (f *fakeSerial) SetDTR(bool) error          { return nil }
+func (f *fakeSerial) SetRTS(bool) error          { return nil }
+func (f *fakeSerial) GetModemStatusBits() (*serial.ModemStatusBits, error) {
+	return &serial.ModemStatusBits{}, nil
+}
+func (f *fakeSerial) SetReadTimeout(time.Duration) error { return nil }
+func (f *fakeSerial) Break(time.Duration) error          { return nil }
+
+// ts2000 answers as internal/catemu does. vfoA/vfoB are the two dials; mode is
+// the Kenwood digit; split selects which VFO transmits.
+type ts2000 struct {
+	vfoA, vfoB int64
+	mode       byte
+	onB        bool
+	split      bool
+	// lazyIF models a rig that answers FR/FT correctly but never fills IF's
+	// split bit — the behaviour reported on a Flex through its Kenwood CAT
+	// emulation, where the frequency reads perfectly and split never appears.
+	lazyIF bool
+	// noVFOCmds models a rig that rejects FR/FT outright ("?;").
+	noVFOCmds bool
+	seen      []string
+}
+
+func (r *ts2000) answer(cmd string) string {
+	r.seen = append(r.seen, cmd)
+	cur := r.vfoA
+	vfoDigit := byte('0')
+	if r.onB {
+		cur, vfoDigit = r.vfoB, '1'
+	}
+	switch {
+	case cmd == "ID;":
+		return "ID019;" // TS-2000, exactly what catemu reports
+	case cmd == "FA;":
+		return fmt.Sprintf("FA%011d;", r.vfoA)
+	case cmd == "FB;":
+		return fmt.Sprintf("FB%011d;", r.vfoB)
+	case cmd == "IF;":
+		split := byte('0')
+		if r.split && !r.lazyIF {
+			split = '1'
+		}
+		// The catemu layout: IF | freq(11) | step(4) | RIT(±5) | 3 | mem(2) |
+		// rx/tx | mode | VFO | scan | split | tone | tone#(2) | shift | ;
+		return fmt.Sprintf("IF%011d%04d%+06d%03d%02d%01d%c%c%01d%c%01d%02d%01d;",
+			cur, 0, 0, 0, 0, 0, r.mode, vfoDigit, 0, split, 0, 0, 0)
+	case strings.HasPrefix(cmd, "FA") && len(cmd) > 3:
+		fmt.Sscanf(cmd, "FA%d;", &r.vfoA)
+		return ""
+	case strings.HasPrefix(cmd, "FB") && len(cmd) > 3:
+		fmt.Sscanf(cmd, "FB%d;", &r.vfoB)
+		return ""
+	case strings.HasPrefix(cmd, "MD") && len(cmd) == 4:
+		r.mode = cmd[2]
+		return ""
+	case cmd == "FR;" || cmd == "FT;":
+		if r.noVFOCmds {
+			return "?;" // rejected, as a rig that does not know the command answers
+		}
+		// FR is the receive VFO, FT the transmit one. They differ exactly when
+		// the rig is in split.
+		v := vfoDigit
+		if cmd == "FT;" && r.split {
+			if vfoDigit == '0' {
+				v = '1'
+			} else {
+				v = '0'
+			}
+		}
+		return fmt.Sprintf("%s%c;", strings.TrimSuffix(cmd, ";"), v)
+	}
+	return "" // AI0;, TX;, RX; — set commands, no reply, as on a real rig
+}
+
+func dialTo(rig *ts2000) func() (serial.Port, error) {
+	return func() (serial.Port, error) {
+		return &fakeSerial{toRig: &strings.Builder{}, answer: rig.answer}, nil
+	}
+}
+
+func TestKenwoodAgainstEmulatedRig(t *testing.T) {
+	rig := &ts2000{vfoA: 14250000, vfoB: 14260000, mode: '2'} // 20 m USB
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = dialTo(rig)
+
+	if err := k.Connect(); err != nil {
+		t.Fatalf("connect: %v", err)
+	}
+	defer k.Disconnect()
+	if k.model != "TS-2000" {
+		t.Errorf("model = %q, want TS-2000 (from ID019)", k.model)
+	}
+
+	// Simplex on A.
+	s, err := k.ReadState()
+	if err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	if !s.Connected || s.FreqHz != 14250000 || s.Mode != "USB" || s.Vfo != "A" || s.Split {
+		t.Errorf("simplex A gave %+v — want 14250000 USB on A, no split", s)
+	}
+
+	// On B: everything must follow the VFO in use, the fault that took several
+	// rounds to settle in the Yaesu backend.
+	rig.onB = true
+	if s, err = k.ReadState(); err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	if s.FreqHz != 14260000 || s.Vfo != "B" {
+		t.Errorf("on B gave %d on VFO %s — want 14260000 on B", s.FreqHz, s.Vfo)
+	}
+
+	// Tuning must write to the VFO in use, not blindly to FA.
+	if err := k.SetFrequency(14265000); err != nil {
+		t.Fatalf("set freq: %v", err)
+	}
+	if rig.vfoB != 14265000 {
+		t.Errorf("VFO B = %d, want 14265000 — the write went to the wrong VFO", rig.vfoB)
+	}
+	if rig.vfoA != 14250000 {
+		t.Errorf("VFO A was disturbed: %d", rig.vfoA)
+	}
+
+	// Split: receive on B, transmit on A. ADIF says FREQ is the TRANSMIT
+	// frequency, so the two must not be swapped — a mistake that writes the
+	// wrong frequency into every logged QSO.
+	rig.split = true
+	if s, err = k.ReadState(); err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	if !s.Split || s.FreqHz != 14250000 || s.RxFreqHz != 14265000 {
+		t.Errorf("split gave tx=%d rx=%d split=%v — want tx 14250000 (A), rx 14265000 (B)",
+			s.FreqHz, s.RxFreqHz, s.Split)
+	}
+
+	// Mode: CW below 10 MHz stays CW; the sideband convention only governs SSB.
+	rig.split = false
+	if err := k.SetMode("CW"); err != nil {
+		t.Fatalf("set mode: %v", err)
+	}
+	if rig.mode != '3' {
+		t.Errorf("mode digit = %q, want '3' (CW)", rig.mode)
+	}
+
+	// PTT is a bare command, and the rig must have actually seen it.
+	if err := k.SetPTT(true); err != nil {
+		t.Fatalf("ptt: %v", err)
+	}
+	if err := k.SetPTT(false); err != nil {
+		t.Fatalf("ptt off: %v", err)
+	}
+	seen := strings.Join(rig.seen, " ")
+	for _, want := range []string{"AI0;", "TX;", "RX;"} {
+		if !strings.Contains(seen, want) {
+			t.Errorf("the rig never received %s — sent: %s", want, seen)
+		}
+	}
+}
+
+// A port that opens onto silence must be reported as such, not as a connected
+// radio. A powered-off rig logged as "connected" wasted an evening of a user's
+// time on the Yaesu backend.
+func TestKenwoodSilentRigIsNotConnected(t *testing.T) {
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = func() (serial.Port, error) {
+		return &fakeSerial{toRig: &strings.Builder{}, answer: func(string) string { return "" }}, nil
+	}
+	err := k.Connect()
+	if err == nil {
+		t.Fatal("a silent port was reported as a connected rig")
+	}
+	if !strings.Contains(err.Error(), "sent nothing") {
+		t.Errorf("error was %q — a silent port should be reported as silence", err)
+	}
+	if k.model != "" {
+		t.Errorf("a stale model survived a failed connect: %q", k.model)
+	}
+}
+
+// Split found through FR/FT when the rig never fills IF's split bit.
+//
+// Reported on a Flex through its Kenwood CAT emulation: frequency read
+// perfectly, split never appeared. Rather than guess at which IF column that
+// firmware populates, ask the question that DEFINES split — is the transmit VFO
+// a different VFO from the receive one — which is what FR and FT answer, and
+// the same rule the Yaesu backend settled on after several wrong turns.
+func TestKenwoodSplitFromFRFT(t *testing.T) {
+	rig := &ts2000{vfoA: 14250000, vfoB: 14260000, mode: '2', lazyIF: true}
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = dialTo(rig)
+	if err := k.Connect(); err != nil {
+		t.Fatalf("connect: %v", err)
+	}
+	defer k.Disconnect()
+
+	// Simplex: FR and FT agree, and nothing may be invented from that.
+	s, err := k.ReadState()
+	if err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	if s.Split {
+		t.Errorf("split reported while FR and FT agree: tx=%d rx=%d", s.FreqHz, s.RxFreqHz)
+	}
+
+	// Split on, IF still silent about it: receive on A, transmit on B.
+	rig.split = true
+	if s, err = k.ReadState(); err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	if !s.Split {
+		t.Fatal("split not detected — FR/FT disagreed and IF's bit was empty, which is the reported case")
+	}
+	if s.FreqHz != 14260000 || s.RxFreqHz != 14250000 {
+		t.Errorf("tx=%d rx=%d — want tx 14260000 (B), rx 14250000 (A)", s.FreqHz, s.RxFreqHz)
+	}
+}
+
+// A rig that rejects FR/FT is asked once, then left alone — and its IF split
+// bit still works. The fallback must not cost a timeout on every poll, nor
+// break the rigs that were already fine.
+func TestKenwoodSplitWhenFRFTRejected(t *testing.T) {
+	rig := &ts2000{vfoA: 14250000, vfoB: 14260000, mode: '2', noVFOCmds: true}
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = dialTo(rig)
+	if err := k.Connect(); err != nil {
+		t.Fatalf("connect: %v", err)
+	}
+	defer k.Disconnect()
+
+	if _, err := k.ReadState(); err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	asked := 0
+	for _, c := range rig.seen {
+		if c == "FR;" || c == "FT;" {
+			asked++
+		}
+	}
+	if _, err := k.ReadState(); err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	after := 0
+	for _, c := range rig.seen {
+		if c == "FR;" || c == "FT;" {
+			after++
+		}
+	}
+	if after != asked {
+		t.Errorf("a rejected command was asked again: %d then %d", asked, after)
+	}
+
+	// IF's own split bit still drives the result on such a rig.
+	rig.split = true
+	s, err := k.ReadState()
+	if err != nil {
+		t.Fatalf("read: %v", err)
+	}
+	if !s.Split || s.FreqHz != 14260000 || s.RxFreqHz != 14250000 {
+		t.Errorf("IF-reported split broke: split=%v tx=%d rx=%d", s.Split, s.FreqHz, s.RxFreqHz)
+	}
+}
+
+// A rig that talks but never answers what was asked must not be reported as a
+// silent one.
+//
+// The two faults need opposite responses: silence means the radio is off, the
+// wrong port, or a dead cable; noise means the baud rate is wrong or something
+// is echoing the line. "The rig is not answering" sent an operator checking the
+// power switch on a radio whose frames were visibly arriving.
+func TestKenwoodNoisyRigIsReportedAsNoiseNotSilence(t *testing.T) {
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = func() (serial.Port, error) {
+		return &fakeSerial{toRig: &strings.Builder{}, answer: func(cmd string) string {
+			return "XX9999;" // something, but never the reply to ID; or IF;
+		}}, nil
+	}
+	err := k.Connect()
+	if err == nil {
+		t.Fatal("a rig answering gibberish was reported as connected")
+	}
+	if !strings.Contains(err.Error(), "sending data") || !strings.Contains(err.Error(), "XX9999;") {
+		t.Errorf("error was %q — it should say data arrived, and quote it", err)
+	}
+}

internal/cat/log.go

@@ -75,37 +75,53 @@ func DebugLogPath() string {
 	return filepath.Join(base, "OpsLog", "cat.log")
 }
 
-// ── CI-V byte trace ────────────────────────────────────────────────────────
+// ── CAT wire trace ─────────────────────────────────────────
 //
-// Opt-in, off by default. Turning it on logs every CI-V frame sent and received
-// as hex, exactly like the WinKeyer protocol trace.
+// Opt-in, off by default. Turning it on logs every frame sent and received —
+// CI-V as hex, the ASCII backends (Kenwood, Yaesu) as the text they exchange.
 //
-// That trace exists because a fault nobody could reason about — "the keyer sends
-// one element then stalls" — was settled in one line the moment the actual bytes
-// were visible. The CI-V link has now produced the same class of report: a MOX
-// button that sets split instead of transmitting, on a rig whose PTT command is
-// demonstrably correct in the source. Guessing at that from the command table
-// has already cost this project a wrong fix; the bytes will say what the rig was
-// really asked.
-var civTrace atomic.Bool
+// It exists because a fault nobody could reason about — "the keyer sends one
+// element then stalls" — was settled in one line the moment the actual bytes
+// were visible, and the CAT links have since produced the same class of report:
+// a MOX button that sets split instead of transmitting, and a split the Kenwood
+// backend does not recognise on a rig whose frequency it reads perfectly.
+//
+// Both are questions about what the RIG actually said. Guessing at that from a
+// protocol document has already cost this project a wrong fix that broke the
+// case which already worked.
+var catTrace atomic.Bool
 
-// SetCIVTrace turns the CI-V byte trace on or off.
+// SetCIVTrace turns the CAT wire trace on or off. Named for the CI-V link it
+// was written for; it now covers the text backends too.
 func SetCIVTrace(on bool) {
-	civTrace.Store(on)
+	catTrace.Store(on)
 	if on {
-		debugLog.Printf("civ trace ON — every CI-V frame to and from the rig is logged")
+		debugLog.Printf("wire trace ON — every CAT frame to and from the rig is logged")
 	} else {
-		debugLog.Printf("civ trace OFF")
+		debugLog.Printf("wire trace OFF")
 	}
 }
 
 // CIVTraceEnabled reports whether the trace is running (for the settings UI).
-func CIVTraceEnabled() bool { return civTrace.Load() }
+func CIVTraceEnabled() bool { return catTrace.Load() }
 
-// traceCIV logs one frame. dir is "TX" (to the rig) or "RX" (from it).
+// traceCIV logs one CI-V frame. dir is "TX" (to the rig) or "RX" (from it).
 func traceCIV(dir string, b []byte) {
-	if !civTrace.Load() || len(b) == 0 {
+	if !catTrace.Load() || len(b) == 0 {
 		return
 	}
 	debugLog.Printf("civ %s % X", dir, b)
 }
+
+// traceText logs one ASCII exchange, for the Kenwood and Yaesu backends.
+//
+// The text is QUOTED. A truncated or empty reply must be visible as such
+// rather than vanish into the line: "" and ";" look identical unquoted, and
+// telling them apart is the whole question when a rig answers a command it
+// does not really support.
+func traceText(backend, dir, s string) {
+	if !catTrace.Load() || s == "" {
+		return
+	}
+	debugLog.Printf("%s %s %q", backend, dir, s)
+}

internal/cat/xiegu.go

@@ -56,6 +56,9 @@ type Xiegu struct {
 	// asking every cycle — a Xiegu that has no split must not cost a timeout per
 	// poll, which would slow the whole loop to a crawl.
 	splitSupported bool
+	// pttLine is "", "rts" or "dtr": which hardware line keys the rig, when the
+	// CI-V command does not.
+	pttLine string
 }
 
 func NewXiegu(portName string, baud int, addr int, digital string) *Xiegu {
@@ -74,6 +77,14 @@ func NewXiegu(portName string, baud int, addr int, digital string) *Xiegu {
 	}
 }
 
+// SetPTTLine selects the hardware line that keys this rig: "rts", "dtr", or ""
+// for the CI-V command. Set before Connect.
+func (x *Xiegu) SetPTTLine(line string) {
+	x.mu.Lock()
+	x.pttLine = strings.ToLower(strings.TrimSpace(line))
+	x.mu.Unlock()
+}
+
 func (x *Xiegu) Name() string { return "xiegu" }
 
 func (x *Xiegu) Connect() error {
@@ -87,6 +98,20 @@ func (x *Xiegu) Connect() error {
 		return fmt.Errorf("xiegu: open %s @ %d baud: %w", x.portName, x.baud, err)
 	}
 	p.SetReadTimeout(200 * time.Millisecond)
+	// Deassert DTR and RTS.
+	//
+	// Windows raises both when a serial port is opened, and a great many
+	// interfaces read them as PTT: a Xiegu G90 behind a DE-19 goes into
+	// transmit the moment OpsLog connects and STAYS there — Xiegu's own
+	// documentation asks for RTS and DTR low. The same applies to an Icom with
+	// USB SEND mapped to a line (which is why the CI-V backend has done this
+	// from the start) and to any rig keyed by a home-made cable.
+	//
+	// PTT on this backend is a CAT command, so neither line should ever be
+	// asserted here. A station keying by RTS/DTR configures that separately,
+	// on its own port.
+	_ = p.SetDTR(false)
+	_ = p.SetRTS(false)
 	x.port = p
 	x.splitSupported = true
 
@@ -177,12 +202,25 @@ func (x *Xiegu) SetMode(mode string) error {
 	return x.send(civ.CmdSetMode, m)
 }
 
+// SetPTT keys the transmitter, by CI-V or by a hardware line.
+//
+// A G90 does not transmit on the CI-V PTT command. Xiegu's own interfaces key
+// on RTS or DTR instead — the DE-19 does exactly that — which is why the line
+// can be selected here. Without it, WSJT-X talking to OpsLog's rigctld server
+// decoded perfectly and never transmitted: the command left, the radio ignored
+// it, and nothing in the chain was wrong enough to complain.
 func (x *Xiegu) SetPTT(on bool) error {
 	x.mu.Lock()
 	defer x.mu.Unlock()
 	if x.port == nil {
 		return fmt.Errorf("xiegu: not connected")
 	}
+	switch x.pttLine {
+	case "rts":
+		return x.port.SetRTS(on)
+	case "dtr":
+		return x.port.SetDTR(on)
+	}
 	v := byte(0x00)
 	if on {
 		v = 0x01

internal/cat/yaesu.go

@@ -82,6 +82,9 @@ var yaesuModeToADIF = map[byte]string{
 }
 
 type Yaesu struct {
+	// lowerLines deasserts DTR and RTS on connect — see Kenwood.lowerLines for
+	// why neither default is safe for every station.
+	lowerLines bool
 	portName   string
 	baud       int
 	digital    string // ADIF mode reported for DATA (FT8, RTTY…)
@@ -127,6 +130,14 @@ func NewYaesu(portName string, baud int, digital string) *Yaesu {
 	return &Yaesu{portName: strings.TrimSpace(portName), baud: baud, digital: digital, curVFO: "A"}
 }
 
+// SetLowerLines chooses whether DTR and RTS are deasserted on connect. Set
+// before Connect.
+func (y *Yaesu) SetLowerLines(v bool) {
+	y.mu.Lock()
+	y.lowerLines = v
+	y.mu.Unlock()
+}
+
 func (y *Yaesu) Name() string { return "yaesu" }
 
 func (y *Yaesu) Connect() error {
@@ -150,6 +161,12 @@ func (y *Yaesu) Connect() error {
 	if err != nil {
 		return fmt.Errorf("yaesu: open %s @ %d baud: %w", y.portName, y.baud, err)
 	}
+	// The modem lines are only touched when the operator asks for it — see the
+	// note on Kenwood.lowerLines. Both defaults break somebody's station.
+	if y.lowerLines {
+		_ = p.SetDTR(false)
+		_ = p.SetRTS(false)
+	}
 	p.SetReadTimeout(300 * time.Millisecond)
 	y.port = p
 

internal/cluster/cluster.go

@@ -11,6 +11,7 @@ package cluster
 
 import (
 	"bufio"
+	"errors"
 	"fmt"
 	"net"
 	"regexp"
@@ -346,12 +347,29 @@ func (s *session) run() {
 	}
 }
 
+// idleTick is how often the read is interrupted so the loop can notice a stop
+// request. It is NOT a liveness test — see the read loop.
+//
+// A var, not a const, so the test that proves a silent node survives can shorten
+// it: at 30 s that test spends a minute doing nothing, and a slow test is a test
+// that gets skipped.
+var idleTick = 30 * time.Second
+
+// quietNotice is the silence after which the log says so, once.
+const quietNotice = 10 * time.Minute
+
 // runOnce dials, optionally logs in, sends init commands, parses spots.
 // Returns the moment we marked the link "connected" (zero if dial failed)
 // and the error that ended the session (nil if stopCh).
 func (s *session) runOnce() (time.Time, error) {
 	addr := net.JoinHostPort(s.cfg.Host, fmt.Sprintf("%d", s.cfg.Port)) // IPv6-safe
-	conn, err := net.DialTimeout("tcp", addr, 10*time.Second)
+	// KeepAlive is set explicitly rather than left to the package default: it is
+	// what actually detects a dead peer here, so it should be visible in the
+	// code that depends on it. The OS probes an idle connection and a genuine
+	// failure surfaces as an error on Read — which is the only thing that ends
+	// a session below.
+	d := net.Dialer{Timeout: 10 * time.Second, KeepAlive: 30 * time.Second}
+	conn, err := d.Dial("tcp", addr)
 	if err != nil {
 		return time.Time{}, fmt.Errorf("dial %s: %w", addr, err)
 	}
@@ -423,6 +441,8 @@ func (s *session) runOnce() (time.Time, error) {
 	}
 
 	var connectedAt time.Time
+	var quiet time.Duration // how long the node has said nothing
+	var pending string      // a line cut in half by a read deadline
 	rd := bufio.NewReader(conn)
 	for {
 		select {
@@ -431,11 +451,37 @@ func (s *session) runOnce() (time.Time, error) {
 		default:
 		}
 
-		_ = conn.SetReadDeadline(time.Now().Add(120 * time.Second))
-		line, err := rd.ReadString('\n')
+		// The deadline exists to keep this loop responsive to stopCh, NOT to
+		// judge the link. A quiet node is a quiet node: some clusters send
+		// nothing for minutes on a dead band, and tearing the socket down over
+		// it produced a reconnect every two minutes — which loses the login,
+		// the filters, and any spot that arrived during the gap.
+		//
+		// Only a REAL error ends the session. A dead peer still gets caught:
+		// TCP keepalive probes an idle connection and its failure arrives here
+		// as an error, not as a timeout.
+		_ = conn.SetReadDeadline(time.Now().Add(idleTick))
+		chunk, err := rd.ReadString('\n')
 		if err != nil {
+			var ne net.Error
+			if errors.As(err, &ne) && ne.Timeout() {
+				// ReadString hands back what it HAD read along with the timeout.
+				// Keep it: a spot line straddling the deadline would otherwise lose
+				// its first half and arrive as nonsense, or vanish entirely.
+				pending += chunk
+				quiet += idleTick
+				// Said once at the first long silence, so a genuinely mute node is
+				// visible without a line every tick.
+				if quiet == quietNotice {
+					applog.Printf("cluster[%s] no traffic for %s — still connected", s.cfg.Name, quiet)
+				}
+				continue
+			}
 			return connectedAt, fmt.Errorf("read: %w", err)
 		}
+		quiet = 0
+		line := pending + chunk
+		pending = ""
 		line = strings.TrimRight(line, "\r\n")
 		// Strip terminal BELLs (\a) and other control bytes that some nodes
 		// (e.g. F5LEN) append to spot lines — "DX de …0935Z KN04\a\a" — which

internal/cluster/idle_test.go

@@ -0,0 +1,89 @@
+package cluster
+
+import (
+	"net"
+	"strconv"
+	"testing"
+	"time"
+)
+
+// A quiet cluster must not be treated as a broken one.
+//
+// Reported by an operator whose node sends little: nothing for two minutes and
+// OpsLog reconnected — losing the login, the filters, and any spot that landed
+// during the gap. The read deadline was being read as a verdict on the link
+// rather than as a way to stay responsive to a stop request.
+//
+// The test holds the connection open, silent for longer than one deadline, then
+// sends a spot. A session that survives receives it; one that reconnects does
+// not, because this listener never accepts twice.
+func TestSilenceDoesNotEndTheSession(t *testing.T) {
+	// Shorten the tick so the test exercises the real code path in seconds.
+	defer func(orig time.Duration) { idleTick = orig }(idleTick)
+	idleTick = time.Second
+	ln, err := net.Listen("tcp", "127.0.0.1:0")
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer ln.Close()
+
+	accepted := make(chan net.Conn, 2)
+	go func() {
+		for {
+			c, err := ln.Accept()
+			if err != nil {
+				return
+			}
+			accepted <- c
+		}
+	}()
+
+	host, portStr, _ := net.SplitHostPort(ln.Addr().String())
+	port, err := strconv.Atoi(portStr)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	spots := make(chan Spot, 4)
+	s := &session{
+		cfg:      ServerConfig{Name: "quiet", Host: host, Port: port},
+		onSpot:   func(sp Spot) { spots <- sp },
+		onLine:   func(Line) {},
+		onStatus: func() {},
+		stopCh:   make(chan struct{}),
+	}
+
+	done := make(chan error, 1)
+	go func() { _, err := s.runOnce(); done <- err }()
+
+	conn := <-accepted
+	defer conn.Close()
+
+	// Silent for longer than one deadline: the loop must ride through it.
+	time.Sleep(3 * idleTick)
+
+	select {
+	case c := <-accepted:
+		c.Close()
+		t.Fatal("the session reconnected during the silence")
+	case err := <-done:
+		t.Fatalf("the session ended during the silence: %v", err)
+	default:
+	}
+
+	// Now a spot: it proves the ORIGINAL connection is still the live one.
+	if _, err := conn.Write([]byte("DX de F4BPO:     14074.0  OY1CT        FT8            1234Z\r\n")); err != nil {
+		t.Fatal(err)
+	}
+	select {
+	case sp := <-spots:
+		if sp.DXCall != "OY1CT" {
+			t.Errorf("spot from the wrong station: %+v", sp)
+		}
+	case <-time.After(5 * time.Second):
+		t.Fatal("the spot sent after the silence never arrived")
+	}
+
+	close(s.stopCh)
+	<-done
+}

internal/cwdecode/cwdecode.go

@@ -125,6 +125,10 @@ type Decoder struct {
 	pendHops   int  // consecutive hops the raw state has disagreed
 
 	// Two-cluster element timing (ms).
+	// muLetterGap is this operator's typical gap BETWEEN LETTERS (ms), so the
+	// word boundary can follow a wide fist instead of chopping up callsigns.
+	// Zero until enough gaps have been seen.
+	muLetterGap  float64
 	muDit, muDah float64
 	marksSeen    int
 
@@ -195,6 +199,19 @@ const (
 
 	charGapDits = 2.2 // gap > this ⇒ character boundary (geom. mean of 1 & 3 ≈ 1.7, plus margin for sloppy fists)
 	wordGapDits = 4.6 // gap > this ⇒ word boundary (geom. mean of 3 & 7)
+
+	// newOverFloorMs is the shortest silence that may end an over — see newOverMs.
+	// Past it the speed estimate is dropped: the next voice on the frequency is
+	// probably somebody else, and the last operator's speed is not evidence
+	// about them. Two seconds is far longer than any word gap (7 dits is 0.42 s
+	// even at 10 wpm) and far shorter than a pause between overs.
+	newOverFloorMs = 600.0
+
+	// wordGapRatio places the word boundary relative to the letter gaps this
+	// operator ACTUALLY sends, for fists whose letter spacing runs wide. The
+	// fixed 4.6-dit rule turned a 5-dit letter gap into a word, so a callsign
+	// arrived as "O Y 1 C T" — which is worse than two words run together.
+	wordGapRatio = 1.6
 )
 
 // New builds a decoder for the given sample rate. onChar receives decoded text
@@ -260,6 +277,7 @@ func (d *Decoder) Reset() {
 	d.stableHops, d.pendHops = 0, 0
 	d.bankTick, d.betterHops = 0, 0
 	d.muDit, d.muDah, d.marksSeen = seedDit, 3*seedDit, 0
+	d.muLetterGap = 0
 	d.elemMs = d.elemMs[:0]
 	d.charEmitted, d.wordEmitted, d.textSince = true, true, false
 }
@@ -578,6 +596,30 @@ func (d *Decoder) endMark(hops int) {
 // steadier than dits in hand keying).
 func (d *Decoder) endSpace(hops int) {
 	ms := float64(hops)*d.hopMs + d.biasMs // gaps shrink by what marks gained
+
+	// A long silence ends the over — see newOverMs. Forget the speed: coming back at 14 wpm
+	// after following someone at 32, every element of the newcomer measured
+	// longer than the stale dah threshold and the first words decoded as a run
+	// of T's. Starting from the seed instead, the estimate re-converges within a
+	// character — which is exactly how a freshly started decoder behaves, and
+	// that case was always fine.
+	if d.marksSeen > 0 && ms > d.newOverMs() {
+		d.muDit, d.muDah, d.marksSeen = seedDit, 3*seedDit, 0
+		d.muLetterGap = 0
+		d.elemMs = d.elemMs[:0]
+		return
+	}
+
+	// Letter gaps: everything between a character boundary and a word boundary.
+	// Kept so the word boundary can follow this operator's own spacing.
+	if d.marksSeen > 0 && ms > charGapDits*d.muDit && ms < wordGapDits*d.muDit*2 {
+		if d.muLetterGap == 0 {
+			d.muLetterGap = ms
+		} else {
+			d.muLetterGap += (ms - d.muLetterGap) * 0.2
+		}
+	}
+
 	if d.marksSeen < 1 || ms < 0.35*d.muDit || ms > 1.7*d.muDit {
 		return
 	}
@@ -592,6 +634,40 @@ func (d *Decoder) endSpace(hops int) {
 	d.muDit = math.Min(math.Max(d.muDit, minDitMs), maxDitMs)
 }
 
+// newOverMs is the silence above which the speed estimate is dropped.
+//
+// It cannot be a fixed duration: 0.75 s is a quick turnaround at 30 wpm but is
+// barely a word gap at 10 wpm (7 dits = 0.84 s). So it scales with the current
+// estimate, with a floor so a fast operator pausing to think is not mistaken
+// for a new station on every hesitation.
+func (d *Decoder) newOverMs() float64 {
+	if v := 12 * d.muDit; v > newOverFloorMs {
+		return v
+	}
+	return newOverFloorMs
+}
+
+// wordGapMs is the silence above which a word boundary is declared.
+//
+// The textbook answer is 4.6 dits — the geometric mean of a 3-dit letter gap
+// and a 7-dit word gap. It assumes the operator sends textbook spacing. Many do
+// not: a fist that leaves 5 dits between letters had every letter turned into a
+// word, so callsigns arrived in pieces.
+//
+// So the boundary also follows the letter gaps actually observed. Whichever is
+// larger wins: a textbook fist keeps the textbook boundary, a wide one gets a
+// wider boundary. The cost is that a wide sender's words may run together —
+// which is a far smaller price than a callsign broken into letters.
+func (d *Decoder) wordGapMs() float64 {
+	fixed := wordGapDits * d.muDit
+	if d.muLetterGap > 0 {
+		if adaptive := wordGapRatio * d.muLetterGap; adaptive > fixed {
+			return adaptive
+		}
+	}
+	return fixed
+}
+
 // spaceProgress emits the pending character / word space LIVE once the current
 // gap crosses each boundary (instead of waiting for the next mark), so text
 // appears as it is sent.
@@ -601,7 +677,7 @@ func (d *Decoder) spaceProgress() {
 		d.flushChar()
 		d.charEmitted = true
 	}
-	if !d.wordEmitted && gapMs > wordGapDits*d.muDit {
+	if !d.wordEmitted && gapMs > d.wordGapMs() {
 		if d.textSince && d.onChar != nil {
 			d.onChar(" ")
 		}

internal/cwdecode/onair_test.go

@@ -0,0 +1,148 @@
+package cwdecode
+
+import (
+	"math"
+	"strings"
+	"testing"
+)
+
+// keyLoose keys a message with SLIGHTLY WIDE letter spacing — the way a great
+// many operators actually send. letterGapDits replaces the standard 3.
+//
+// Same envelope shaping as keyMessage: hard edges would make an easier signal
+// than anything on the air, and would prove nothing.
+func keyLoose(msg string, fs, wpm int, pitch, amp float64, letterGapDits float64) []int16 {
+	dot := fs * 1200 / (wpm * 1000)
+	edge := fs * 5 / 1000
+	c2m := charToMorse()
+	var out []float64
+	phase := 0.0
+	dphi := 2 * math.Pi * pitch / float64(fs)
+
+	tone := func(n int) {
+		for i := 0; i < n; i++ {
+			g := 1.0
+			if i < edge {
+				g = 0.5 - 0.5*math.Cos(math.Pi*float64(i)/float64(edge))
+			} else if n-1-i < edge {
+				g = 0.5 - 0.5*math.Cos(math.Pi*float64(n-1-i)/float64(edge))
+			}
+			out = append(out, amp*g*math.Sin(phase))
+			phase += dphi
+		}
+	}
+	silence := func(n int) {
+		for i := 0; i < n; i++ {
+			out = append(out, 0)
+			phase += dphi
+		}
+	}
+
+	silence(fs / 4)
+	for i := 0; i < len(msg); i++ {
+		ch := msg[i]
+		if ch == ' ' {
+			silence(4 * dot)
+			continue
+		}
+		code := c2m[ch]
+		for j := 0; j < len(code); j++ {
+			if code[j] == '.' {
+				tone(dot)
+			} else {
+				tone(3 * dot)
+			}
+			silence(dot)
+		}
+		// The element gap above already contributes one dit.
+		silence(int((letterGapDits - 1) * float64(dot)))
+	}
+	silence(fs / 2)
+	return toInt16(out)
+}
+
+// The first character of an over must decode, not arrive as "?".
+//
+// Reported on the air: "the first letter or digit often turns into ?". Each
+// element is classified against the running dit estimate, and at the start of
+// an over that estimate belongs to whatever was decoded last — a different
+// operator, at a different speed. The first character pays for it.
+func TestFirstCharacterOfAnOver(t *testing.T) {
+	const fs = 16000
+	for _, wpm := range []int{15, 22, 30} {
+		got := decode(t, keyMessage("F4BPO DE OY1CT K", fs, wpm, 700, 9000), 0)
+		if strings.HasPrefix(got, "?") {
+			t.Errorf("@%d wpm: decoded %q — the first character was lost", wpm, got)
+		}
+	}
+}
+
+// A callsign must not be broken up when the sender's letter spacing is a little
+// wide.
+//
+// Reported on the air: "sometimes there are spaces inside the call". A word
+// boundary is declared above 4.6 dits of silence, so an operator whose letter
+// gaps run to 4.5 dits has every letter turned into a word of its own.
+func TestWideLetterSpacingDoesNotSplitTheCall(t *testing.T) {
+	const fs = 16000
+	for _, gap := range []float64{3.5, 4.0, 4.5} {
+		got := decode(t, keyLoose("DE OY1CT K", fs, 20, 700, 9000, gap), 0)
+		for _, split := range []string{"O Y", "Y 1", "1 C", "C T"} {
+			if strings.Contains(got, split) {
+				t.Errorf("letter gap %.1f dits: decoded %q — the callsign was broken at %q", gap, got, split)
+			}
+		}
+	}
+}
+
+// decodeSeq runs several transmissions through the SAME decoder, as happens on
+// the air: the estimate carried into an over is whatever the previous station
+// left behind.
+func decodeSeq(t *testing.T, parts ...[]int16) []string {
+	t.Helper()
+	var cur strings.Builder
+	d := New(16000, func(s string) { cur.WriteString(s) }, nil)
+	out := make([]string, 0, len(parts))
+	for _, p := range parts {
+		cur.Reset()
+		for i := 0; i < len(p); i += 256 {
+			end := i + 256
+			if end > len(p) {
+				end = len(p)
+			}
+			d.Process(p[i:end])
+		}
+		out = append(out, strings.ToUpper(cur.String()))
+	}
+	return out
+}
+
+// A fast station, then a slow one — the real reason the first character is
+// lost. A fresh decoder starts from a neutral estimate and adapts within a
+// character or two; a decoder that has just followed someone at 30 wpm judges
+// the newcomer's first dits against 30 wpm.
+func TestFirstCharacterAfterASpeedChange(t *testing.T) {
+	const fs = 16000
+	got := decodeSeq(t,
+		keyMessage("CQ CQ DE DL1ABC K", fs, 32, 700, 9000),
+		keyMessage("DL1ABC DE OY1CT K", fs, 14, 700, 9000),
+	)
+	if strings.HasPrefix(got[1], "?") {
+		t.Errorf("after 32→14 wpm: %q — the first character of the reply was lost", got[1])
+	}
+	if !strings.Contains(got[1], "OY1CT") {
+		t.Errorf("after 32→14 wpm: %q — want the callsign intact", got[1])
+	}
+}
+
+// Hand-sent letter gaps run wide. Above 4.6 dits every letter becomes a word,
+// so a callsign arrives in pieces.
+func TestVeryWideLetterSpacing(t *testing.T) {
+	const fs = 16000
+	for _, gap := range []float64{5.0, 5.5, 6.0} {
+		got := decode(t, keyLoose("DE OY1CT K", fs, 18, 700, 9000, gap), 0)
+		if strings.Contains(got, "O Y") || strings.Contains(got, "Y 1") || strings.Contains(got, "1 C") {
+			t.Errorf("letter gap %.1f dits: decoded %q — the callsign was broken up", gap, got)
+		}
+	}
+}

internal/extsvc/delete.go

@@ -0,0 +1,198 @@
+package extsvc
+
+// Withdrawing a QSO from the external services after it is deleted locally.
+//
+// The two services could hardly be less alike, and the difference decides what
+// is possible for QSOs already in the log:
+//
+//   - QRZ.com deletes ONLY by logid — the identifier it returns on INSERT.
+//     There is no delete-by-callsign-and-date. A QSO uploaded before OpsLog
+//     started recording that identifier therefore cannot be withdrawn from
+//     here; the operator has to do it on the website. QRZ's own documentation
+//     puts it plainly: "There is no undo from this operation."
+//   - Club Log deletes by MATCH: the worked callsign, the exact timestamp and
+//     the band. Nothing has to have been stored in advance, so this works for
+//     every QSO in the log, past or future.
+
+import (
+	"context"
+	"fmt"
+	"io"
+	"net/http"
+	"net/url"
+	"strconv"
+	"strings"
+	"time"
+)
+
+// clublogDeleteURL is Club Log's real-time single-QSO delete endpoint.
+const clublogDeleteURL = "https://clublog.org/delete.php"
+
+// DeleteQRZ removes QSOs from a QRZ logbook by their logid.
+//
+// The identifiers come from the LOGID QRZ returns on INSERT, which OpsLog
+// stores on the QSO as APP_OPSLOG_QRZ_LOGID.
+//
+// QRZ answers RESULT=OK when every id was deleted, PARTIAL when some were not
+// found, FAIL when none were. PARTIAL and FAIL are NOT treated as errors here:
+// the QSO is being deleted locally either way, and "it was already gone from
+// QRZ" is the outcome the operator wanted. The message is returned so the
+// caller can log what actually happened.
+func DeleteQRZ(ctx context.Context, client *http.Client, apiKey string, logIDs []string) (string, error) {
+	apiKey = strings.TrimSpace(apiKey)
+	if apiKey == "" {
+		return "", fmt.Errorf("qrz: api key not set")
+	}
+	ids := make([]string, 0, len(logIDs))
+	for _, id := range logIDs {
+		if id = strings.TrimSpace(id); id != "" {
+			ids = append(ids, id)
+		}
+	}
+	if len(ids) == 0 {
+		return "", fmt.Errorf("qrz: no logid recorded for this QSO — it can only be removed on qrz.com")
+	}
+
+	form := url.Values{}
+	form.Set("KEY", apiKey)
+	form.Set("ACTION", "DELETE")
+	form.Set("LOGIDS", strings.Join(ids, ","))
+
+	body, err := postForm(ctx, client, qrzAPIURL, form, 20*time.Second)
+	if err != nil {
+		return "", fmt.Errorf("qrz: %w", err)
+	}
+	LogSink("qrz: DELETE raw response: %s", strings.TrimSpace(body))
+
+	vals, _ := url.ParseQuery(strings.TrimSpace(body))
+	result := strings.ToUpper(strings.TrimSpace(vals.Get("RESULT")))
+	count := strings.TrimSpace(vals.Get("COUNT"))
+	switch result {
+	case "OK", "PARTIAL", "FAIL":
+		return fmt.Sprintf("RESULT=%s COUNT=%s", result, count), nil
+	case "AUTH":
+		return "", fmt.Errorf("qrz: the logbook key was refused")
+	}
+	return "", fmt.Errorf("qrz: unexpected reply %q", strings.TrimSpace(body))
+}
+
+// DeleteClublog removes one QSO from a Club Log logbook.
+//
+// whenUTC must be the QSO's start time; Club Log matches on it EXACTLY, to the
+// second, so a rounded or local-time value simply finds nothing. band is an
+// ADIF band name ("20m"), translated below to the band number Club Log wants.
+func DeleteClublog(ctx context.Context, client *http.Client, cfg ServiceConfig, dxCall string, whenUTC time.Time, band string) (string, error) {
+	email := strings.TrimSpace(cfg.Email)
+	call := strings.ToUpper(strings.TrimSpace(cfg.Callsign))
+	dx := strings.ToUpper(strings.TrimSpace(dxCall))
+	switch {
+	case email == "":
+		return "", fmt.Errorf("clublog: account email not set")
+	case cfg.Password == "":
+		return "", fmt.Errorf("clublog: password not set")
+	case call == "":
+		return "", fmt.Errorf("clublog: logbook callsign not set")
+	case dx == "":
+		return "", fmt.Errorf("clublog: no callsign to delete")
+	case whenUTC.IsZero():
+		return "", fmt.Errorf("clublog: the QSO has no time — Club Log matches on it exactly")
+	}
+	bandID, ok := clublogBandID(band)
+	if !ok {
+		return "", fmt.Errorf("clublog: band %q is not one Club Log accepts for deletion", band)
+	}
+
+	form := url.Values{}
+	form.Set("email", email)
+	form.Set("password", cfg.Password)
+	form.Set("callsign", call)
+	form.Set("dxcall", dx)
+	form.Set("datetime", whenUTC.UTC().Format("2006-01-02 15:04:05"))
+	form.Set("bandid", strconv.Itoa(bandID))
+	api := strings.TrimSpace(cfg.APIKey)
+	if api == "" {
+		api = clublogAppAPIKey
+	}
+	form.Set("api", api)
+
+	body, err := postForm(ctx, client, clublogDeleteURL, form, 20*time.Second)
+	if err != nil {
+		return "", fmt.Errorf("clublog: %w", err)
+	}
+	msg := strings.TrimSpace(body)
+	LogSink("clublog: DELETE raw response: %s", msg)
+	// "QSO Not Deleted" means no record matched. That is not an error worth
+	// stopping for — the QSO is going away locally regardless, and a QSO absent
+	// from Club Log is the state being asked for.
+	return msg, nil
+}
+
+// clublogBandID maps an ADIF band name to Club Log's band number.
+//
+// The list is Club Log's own, and it is deliberately NOT derived from the
+// frequency: Club Log accepts these values and no others, so a band outside it
+// must be reported rather than approximated to a neighbour.
+func clublogBandID(band string) (int, bool) {
+	switch strings.ToLower(strings.TrimSpace(band)) {
+	case "160m":
+		return 160, true
+	case "80m":
+		return 80, true
+	case "60m":
+		return 60, true
+	case "40m":
+		return 40, true
+	case "30m":
+		return 30, true
+	case "20m":
+		return 20, true
+	case "17m":
+		return 17, true
+	case "15m":
+		return 15, true
+	case "12m":
+		return 12, true
+	case "10m":
+		return 10, true
+	case "6m":
+		return 6, true
+	case "4m":
+		return 4, true
+	case "2m":
+		return 2, true
+	case "70cm":
+		return 70, true
+	case "23cm":
+		return 23, true
+	case "13cm":
+		return 13, true
+	}
+	return 0, false
+}
+
+// postForm is the shared request/read for both deletes.
+func postForm(ctx context.Context, client *http.Client, endpoint string, form url.Values, timeout time.Duration) (string, error) {
+	req, err := http.NewRequestWithContext(ctx, http.MethodPost, endpoint, strings.NewReader(form.Encode()))
+	if err != nil {
+		return "", fmt.Errorf("build request: %w", err)
+	}
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	req.Header.Set("User-Agent", clublogUserAgent)
+	if client == nil {
+		client = &http.Client{Timeout: timeout}
+	}
+	resp, err := client.Do(req)
+	if err != nil {
+		return "", fmt.Errorf("request failed: %w", err)
+	}
+	defer resp.Body.Close()
+	raw, err := io.ReadAll(io.LimitReader(resp.Body, 64*1024))
+	if err != nil {
+		return "", fmt.Errorf("read response: %w", err)
+	}
+	b := string(raw)
+	if resp.StatusCode != http.StatusOK {
+		return "", fmt.Errorf("http %d: %s", resp.StatusCode, strings.TrimSpace(b))
+	}
+	return b, nil
+}

internal/extsvc/delete_test.go

@@ -0,0 +1,32 @@
+package extsvc
+
+import "testing"
+
+// Club Log matches a deletion on callsign, exact time and BAND NUMBER. A band
+// that maps to the wrong number does not fail — it points the delete at a
+// different QSO, or at nothing, silently. So the table is pinned.
+func TestClublogBandID(t *testing.T) {
+	for _, c := range []struct {
+		band string
+		want int
+	}{
+		{"160m", 160}, {"80m", 80}, {"60m", 60}, {"40m", 40}, {"30m", 30},
+		{"20m", 20}, {"17m", 17}, {"15m", 15}, {"12m", 12}, {"10m", 10},
+		{"6m", 6}, {"4m", 4}, {"2m", 2},
+		{"70cm", 70}, {"23cm", 23}, {"13cm", 13},
+		{"20M", 20}, {" 20m ", 20}, // ADIF case and stray spaces
+	} {
+		got, ok := clublogBandID(c.band)
+		if !ok || got != c.want {
+			t.Errorf("clublogBandID(%q) = %d,%v — want %d", c.band, got, ok, c.want)
+		}
+	}
+
+	// Bands Club Log does not accept must be REFUSED, never approximated to a
+	// neighbour: 6 cm silently becoming 13 cm would delete somebody else's QSO.
+	for _, bad := range []string{"", "6cm", "3cm", "2200m", "630m", "9cm", "banana"} {
+		if id, ok := clublogBandID(bad); ok {
+			t.Errorf("clublogBandID(%q) accepted as %d — it is not a Club Log band", bad, id)
+		}
+	}
+}

internal/extsvc/extsvc.go

@@ -128,6 +128,13 @@ type ExternalServices struct {
 	HRDLog   ServiceConfig `json:"hrdlog"`
 	EQSL     ServiceConfig `json:"eqsl"`
 	Cloudlog ServiceConfig `json:"cloudlog"`
+
+	// DeleteRemote asks OpsLog to withdraw a QSO from QRZ.com and Club Log when
+	// it is deleted locally. Off unless the operator turns it on: neither
+	// service can undo it, and a local delete is not always meant to reach the
+	// world — a duplicate cleared from a contest log was never meant to be a
+	// statement about the DX's log.
+	DeleteRemote bool `json:"delete_remote"`
 }
 
 // UploadResult is the outcome of a single upload attempt.

internal/integrations/udp/server.go

@@ -196,7 +196,6 @@ func (s *Server) run() {
 }
 
 func (s *Server) handle(pkt []byte, remote *net.UDPAddr) {
-	applog.Printf("udp: [%s] rx %d bytes from %s\n", s.cfg.Name, len(pkt), remote)
 	ev := Event{ConfigID: s.cfg.ID, Service: s.cfg.ServiceType, Source: remote.String()}
 	switch s.cfg.ServiceType {
 	case ServiceWSJT:
@@ -229,8 +228,12 @@ func (s *Server) handle(pkt []byte, remote *net.UDPAddr) {
 			ev.Mode = w.Mode
 			break
 		}
-		applog.Printf("udp: [%s] WSJT decoded: prog=%q dx_call=%q grid=%q mode=%q freq=%d adif_len=%d\n",
+		// Only a logged QSO is worth a line — WSJT-X/MSHV send a Status packet
+		// every second, and logging each one buried the rest of the file.
+		if len(w.LoggedADIF) > 0 {
+			applog.Printf("udp: [%s] WSJT QSO logged: prog=%q dx_call=%q grid=%q mode=%q freq=%d adif_len=%d\n",
 				s.cfg.Name, w.ProgramID, w.DXCall, w.DXGrid, w.Mode, w.FreqHz, len(w.LoggedADIF))
+		}
 		ev.DXCall = w.DXCall
 		ev.DXGrid = w.DXGrid
 		ev.Mode = w.Mode

internal/powergenius/powergenius.go

@@ -9,6 +9,7 @@ package powergenius
 import (
 	"bufio"
 	"fmt"
+	"math"
 	"net"
 	"strconv"
 	"strings"
@@ -36,6 +37,16 @@ type Status struct {
 	FanMode     string  `json:"fan_mode,omitempty"` // STANDARD / CONTEST / BROADCAST
 	Temperature float64 `json:"temperature"`
 	Operate     bool    `json:"operate"` // OPERATE vs STANDBY (optimistic until the amp reports it)
+
+	// Live power, read straight from the amplifier's own status frame rather
+	// than sampled off the FlexRadio meter stream. PeakW is the amp's own peak
+	// detector: a poll catches one instant of the envelope, so the plain forward
+	// figure lands between syllables as often as on a peak.
+	FwdW   float64 `json:"fwd_w"`   // forward power [W] (the frame reports dBm)
+	PeakW  float64 `json:"peak_w"`  // peak forward power [W]
+	Vswr   float64 `json:"vswr"`    // VSWR, derived from the frame's return loss in dB
+	Id     float64 `json:"id"`      // drain current [A]
+	PeakId float64 `json:"peak_id"` // peak drain current [A]
 }
 
 type Client struct {
@@ -226,9 +237,9 @@ func (c *Client) parse(resp string) {
 	c.statusMu.Lock()
 	c.status.Connected = true
 	c.status.LastError = ""
-	// Log each DISTINCT status payload once: the PGXL's field set isn't fully
-	// documented, so this is how we learn the real key for e.g. operate/standby.
-	if data != c.lastRaw {
+	// One raw frame per session is enough to learn the field set — the frames
+	// carry live meter values, so "log on change" logged every frame.
+	if c.lastRaw == "" {
 		c.lastRaw = data
 		applog.Printf("pgxl: status raw=%q", data)
 	}
@@ -252,7 +263,50 @@ func (c *Client) parse(resp string) {
 			c.status.FanMode = dev
 		case "temp":
 			c.status.Temperature, _ = strconv.ParseFloat(kv[1], 64)
+		case "fwd":
+			if v, err := strconv.ParseFloat(kv[1], 64); err == nil {
+				c.status.FwdW = dbmToWatts(v)
+			}
+		case "peakfwd":
+			if v, err := strconv.ParseFloat(kv[1], 64); err == nil {
+				c.status.PeakW = dbmToWatts(v)
+			}
+		case "swr":
+			if v, err := strconv.ParseFloat(kv[1], 64); err == nil {
+				c.status.Vswr = returnLossToVswr(v)
+			}
+		case "id":
+			c.status.Id, _ = strconv.ParseFloat(kv[1], 64)
+		case "peakid":
+			c.status.PeakId, _ = strconv.ParseFloat(kv[1], 64)
 		}
 	}
 	c.statusMu.Unlock()
 }
+
+// dbmToWatts converts a power reading in dBm to watts (0 dBm = 1 mW). The amp
+// reports power that way — "fwd=60.5" is 1122 W, not 60 W.
+func dbmToWatts(dbm float64) float64 {
+	if dbm <= 0 {
+		return 0
+	}
+	return math.Pow(10, (dbm-30)/10)
+}
+
+// returnLossToVswr converts the amp's "swr" field — a return loss in dB, sent
+// negative for a good match — into the VSWR ratio an operator reads.
+func returnLossToVswr(swrDb float64) float64 {
+	rl := math.Abs(swrDb)
+	if rl <= 0 {
+		return 0
+	}
+	rho := math.Pow(10, -rl/20)
+	if rho >= 1 {
+		return 0
+	}
+	vswr := (1 + rho) / (1 - rho)
+	if vswr > 99.9 || math.IsInf(vswr, 0) || math.IsNaN(vswr) {
+		return 0
+	}
+	return vswr
+}

internal/qso/qso.go

@@ -2061,6 +2061,41 @@ func (r *Repo) WorkedCountyKeys(ctx context.Context, keyFn func(state, cnty stri
 	return out, rows.Err()
 }
 
+// CountyWorked reports whether one US county has already been worked.
+//
+// It exists so the entry panel can flag a new county without loading the whole
+// worked-county set on every keystroke — the county arrives from a QRZ lookup,
+// which is exactly when the operator is deciding whether the contact is worth
+// chasing. The comparison goes through keyFn on both sides (rather than a SQL
+// equality) because logged county spellings vary — "Los Angeles" against
+// "LOS ANGELES, CA" — and the key function is what already resolves that
+// everywhere else.
+func (r *Repo) CountyWorked(ctx context.Context, state, cnty string, keyFn func(state, cnty string) string) (bool, error) {
+	want := keyFn(state, cnty)
+	if want == "" {
+		return false, nil
+	}
+	// Narrowed to the one state: a few dozen rows, not the whole logbook.
+	rows, err := r.db.QueryContext(ctx,
+		`SELECT DISTINCT COALESCE(state,''), COALESCE(cnty,'') FROM qso
+		 WHERE dxcc IN (291,110,6) AND cnty IS NOT NULL AND cnty != ''
+		   AND upper(COALESCE(state,'')) = upper(?)`, strings.TrimSpace(state))
+	if err != nil {
+		return false, err
+	}
+	defer rows.Close()
+	for rows.Next() {
+		var st, cn string
+		if err := rows.Scan(&st, &cn); err != nil {
+			return false, err
+		}
+		if keyFn(st, cn) == want {
+			return true, nil
+		}
+	}
+	return false, rows.Err()
+}
+
 // WorkedCallBandModeKeys returns the set of every worked "CALL|BAND|MODE" key
 // (all upper-cased), loaded in one pass. It backs the in-memory worked-index the
 // alert engine checks per cluster spot — a DB query per spot cannot keep up with
@@ -2506,6 +2541,23 @@ func (r *Repo) MarkQRZConfirmed(ctx context.Context, id int64, date string) erro
 	return nil
 }
 
+// ClearQRZConfirmed takes back a QRZ confirmation.
+//
+// Needed because OpsLog set some wrongly: it read qrzcom_qso_download_status,
+// which QRZ puts on everything it hands back, as QRZ's confirmation. Those
+// QSOs count towards award slots, so leaving them green until the operator
+// notices is not an option — and nothing else in the app would ever undo them.
+func (r *Repo) ClearQRZConfirmed(ctx context.Context, id int64) error {
+	_, err := r.db.ExecContext(ctx,
+		`UPDATE qso SET qrzcom_qso_download_status = 'N', qrzcom_qso_download_date = NULL,
+		   updated_at = ? WHERE id = ?`,
+		db.NowISO(), id)
+	if err != nil {
+		return fmt.Errorf("clear qrz confirmed %d: %w", id, err)
+	}
+	return nil
+}
+
 // MarkEQSLConfirmed stamps EQSL_QSL_RCVD=Y and the received date on a QSO after
 // an eQSL Inbox download. date is an ADIF YYYYMMDD string.
 func (r *Repo) MarkEQSLConfirmed(ctx context.Context, id int64, date string) error {

internal/spe/spe.go

@@ -33,13 +33,11 @@ const (
 	cmdOperate byte = 0x0D // toggles STANDBY ↔ OPERATE (confirmed on hw)
 	cmdStatus  byte = 0x90 // request the status string
 
-	// Best-guess keystroke codes reconstructed from the APG command table after
-	// correcting the PDF's note-wrap misalignment (anchored to the confirmed
-	// OPERATE=0x0D): OFF=0x0A, POWER=0x0B. The POWER key doubles as power-on (when
-	// the amp is off) and the output-level cycle L→M→H (when it's on) — same as the
-	// single physical POWER button. To be verified on hardware.
-	cmdOff   byte = 0x0A // OFF key — switch the amplifier off
-	cmdPower byte = 0x0B // POWER key — turn on / cycle output power level
+	// From the official APG rev 1.1 command table. Note POWER does NOT switch a
+	// sleeping amp on (that is the RTS/DTR wake, see PowerOn) — on a running amp
+	// it cycles the output level L→M→H, which is all we use it for.
+	cmdOff   byte = 0x0A // SWITCH OFF key — how PowerOff switches the amp off
+	cmdPower byte = 0x0B // POWER key — cycles the output power level
 
 	syncHost = 0x55
 	syncAmp  = 0xAA
@@ -47,11 +45,16 @@ const (
 	dialTimeout = 5 * time.Second
 	ioTimeout   = 3 * time.Second
 	pollEvery   = 800 * time.Millisecond
+
+	// How long a modem line is held LOW before being raised again, to give the
+	// amp's edge-triggered remote-on input a transition it can see.
+	wakePulse = time.Second
 )
 
 // Status is the decoded amplifier state for the UI.
 type Status struct {
 	Connected  bool    `json:"connected"`
+	Transport  string  `json:"transport"` // "serial" | "tcp" — the UI enables power-ON on serial even when asleep
 	LastError  string  `json:"last_error,omitempty"`
 	Model      string  `json:"model,omitempty"`       // "20K" / "13K"
 	Operate    bool    `json:"operate"`               // true = OPERATE, false = STANDBY
@@ -91,6 +94,8 @@ type Client struct {
 
 	stop    chan struct{}
 	running bool
+
+	lastConnErr string // last connect failure logged (log only on change)
 }
 
 func New(cfg Config) *Client {
@@ -123,7 +128,13 @@ func (c *Client) Stop() {
 func (c *Client) GetStatus() Status {
 	c.statusMu.RLock()
 	defer c.statusMu.RUnlock()
-	return c.status
+	s := c.status
+	if c.cfg.Transport == "tcp" {
+		s.Transport = "tcp"
+	} else {
+		s.Transport = "serial"
+	}
+	return s
 }
 
 func (c *Client) setErr(err error) {
@@ -146,27 +157,79 @@ func (c *Client) Operate(on bool) error {
 // ToggleOperate flips STANDBY/OPERATE unconditionally.
 func (c *Client) ToggleOperate() error { return c.sendCmd(cmdOperate) }
 
-// PowerOn turns the amplifier on. Per the SPE manual this is NOT a data command
-// but a hardware DTR pulse on the serial line (the "Remote_ON" pin), which needs
-// the special SPE cable — so it only applies to the serial transport. Over TCP
-// there is no DTR line and power-on isn't possible remotely.
+// PowerOn switches the amplifier on with a RISING EDGE on RTS, then on DTR.
+//
+// Confirmed on a live 1.3K-FA. The remote-on input is EDGE-triggered, which is
+// why holding the lines high does nothing: a plain port open already leaves both
+// high (the serial library's default), so there is no transition left to give.
+// Hence low → pause → high on each line, in that order. The keystroke route is a
+// dead end — a switched-off amp does not answer its UART at all, and the POWER
+// key (0x0B) merely cycles L/M/H on an amp that is already running.
+//
+// Serial only: over TCP there are no modem lines. The port is (re)opened first,
+// since the poll loop has dropped the connection to a sleeping amp long before
+// the user clicks ON.
 func (c *Client) PowerOn() error {
-	c.mu.Lock()
-	defer c.mu.Unlock()
-	sp, ok := c.conn.(serial.Port)
-	if !ok {
-		return fmt.Errorf("power-on needs the serial DTR line (special SPE cable); not available over network")
+	if c.cfg.Transport == "tcp" {
+		return fmt.Errorf("power-on needs the serial RTS/DTR lines; not available over a network bridge")
 	}
-	// A single positive pulse (~1.2s) on DTR, as the manual describes.
-	if err := sp.SetDTR(true); err != nil {
+	// On an amp that is already awake there is nothing to wake.
+	if c.GetStatus().Connected {
+		return nil
+	}
+	// The poll goroutine may still be inside a blocking read on the old handle;
+	// Windows keeps the port "busy" until that read times out (ioTimeout). Retry
+	// the open for a little longer than that.
+	var err error
+	deadline := time.Now().Add(ioTimeout + 3*time.Second)
+	for {
+		if err = c.ensureConn(); err == nil || time.Now().After(deadline) {
+			break
+		}
+		time.Sleep(200 * time.Millisecond)
+	}
+	if err != nil {
+		applog.Printf("spe: power ON failed — cannot open %s: %v", c.cfg.ComPort, err)
+		return fmt.Errorf("power-on: %w", err)
+	}
+	c.mu.Lock()
+	sp, ok := c.conn.(serial.Port)
+	c.mu.Unlock()
+	if !ok {
+		return fmt.Errorf("power-on needs a serial connection")
+	}
+	pulse := func(set func(bool) error) error {
+		if err := set(false); err != nil {
 			return err
 		}
-	time.Sleep(1200 * time.Millisecond)
-	return sp.SetDTR(false)
+		time.Sleep(wakePulse)
+		return set(true)
+	}
+	if err = pulse(sp.SetRTS); err == nil {
+		err = pulse(sp.SetDTR)
+	}
+	// Booting, the amp re-enumerates its USB interface, which leaves this handle
+	// pointing at a device that no longer exists — the amp came up and OpsLog
+	// still read "offline". Drop it; the poll loop reopens a fresh one as soon as
+	// the port is back.
+	c.mu.Lock()
+	c.dropLocked()
+	c.mu.Unlock()
+	applog.Printf("spe: power ON — RTS then DTR pulsed on %s (err=%v)", c.cfg.ComPort, err)
+	return err
 }
 
-// PowerOff presses the OFF key (switches the amp off).
-func (c *Client) PowerOff() error { return c.sendCmd(cmdOff) }
+// PowerOff presses the SWITCH OFF key (0x0A) — the amp is running, so it hears
+// its UART. Dropping DTR then RTS switches it off too (it is the mirror of the
+// wake, and does work when done by hand), but back-to-back from one click it
+// did not, while this keystroke has never once failed. The amp then stays off:
+// the poll loop keeps reopening the port with both lines high and that has
+// never woken it — only the deliberate low→high sequence in PowerOn does.
+func (c *Client) PowerOff() error {
+	err := c.sendCmd(cmdOff)
+	applog.Printf("spe: power OFF — SWITCH OFF key sent (err=%v)", err)
+	return err
+}
 
 // SetPowerLevel cycles the output power level (L/M/H) to the requested one by
 // tapping the POWER key (0x0B) and WAITING for the amp to actually report the new
@@ -206,9 +269,16 @@ func (c *Client) pollLoop() {
 			return
 		case <-t.C:
 			if err := c.ensureConn(); err != nil {
+				// Logged once per distinct message: "the amp is on but OpsLog
+				// says offline" was impossible to diagnose without the reason.
+				if msg := err.Error(); msg != c.lastConnErr {
+					c.lastConnErr = msg
+					applog.Printf("spe: connect %s failed: %s", c.cfg.ComPort, msg)
+				}
 				c.setErr(fmt.Errorf("connect: %w", err))
 				continue
 			}
+			c.lastConnErr = ""
 			// The amp streams status frames faster than one per poll, so a backlog
 			// builds up and we'd read stale frames (the display lagged ~15s behind
 			// the real amp). Flush anything pending, THEN request + read exactly one
@@ -239,16 +309,48 @@ func (c *Client) ensureConn() error {
 		nc, err = net.DialTimeout("tcp", net.JoinHostPort(c.cfg.Host, strconv.Itoa(c.cfg.Port)), dialTimeout)
 		rwc = nc
 	} else {
-		rwc, err = serial.Open(c.cfg.ComPort, &serial.Mode{BaudRate: c.cfg.Baud})
+		var sp serial.Port
+		// Plain open: both modem lines come up high (the library's default), which
+		// is what the interface needs to talk. That is not enough to switch the amp
+		// on — the remote-on input wants the deliberate low→high sequence PowerOn
+		// sends — so reconnecting never wakes an amplifier the operator switched
+		// off, and forcing either line low here would switch a running one off.
+		sp, err = serial.Open(c.cfg.ComPort, &serial.Mode{BaudRate: c.cfg.Baud})
+		if err == nil {
+			// Without this, a read on a sleeping amp blocks forever inside the
+			// Windows serial driver — the poll goroutine survived the window and
+			// the process took ~a minute to die.
+			_ = sp.SetReadTimeout(ioTimeout)
+			rwc = sp
+		}
 	}
 	if err != nil {
 		return err
 	}
 	c.conn = rwc
+	if sp, ok := rwc.(serial.Port); ok {
+		// The driver reports a read timeout as "0 bytes, no error", which bufio
+		// spins on; surface it as a real error so the poll loop drops and retries.
+		c.r = bufio.NewReader(serialTimeoutReader{sp})
+	} else {
 		c.r = bufio.NewReader(rwc)
+	}
 	return nil
 }
 
+// serialTimeoutReader converts the serial driver's timeout convention (n=0,
+// err=nil once SetReadTimeout expires) into an explicit error, so a bufio
+// reader fails fast instead of retrying an amp that is asleep.
+type serialTimeoutReader struct{ p serial.Port }
+
+func (s serialTimeoutReader) Read(b []byte) (int, error) {
+	n, err := s.p.Read(b)
+	if n == 0 && err == nil {
+		return 0, fmt.Errorf("spe: read timeout")
+	}
+	return n, err
+}
+
 func (c *Client) dropLocked() {
 	if c.conn != nil {
 		c.conn.Close()
@@ -361,9 +463,10 @@ func (c *Client) decodeCSV(payload string) {
 
 	c.statusMu.Lock()
 	defer c.statusMu.Unlock()
-	// Log the raw status frame ONCE per change, so field alignment can be verified
-	// against real hardware (the doc's 19-field layout may differ per firmware).
-	if payload != c.lastRaw {
+	// One raw frame per session is enough to verify field alignment against real
+	// hardware — the frame carries live meter values, so logging each change
+	// meant logging nearly every frame.
+	if c.lastRaw == "" {
 		c.lastRaw = payload
 		applog.Printf("spe: status raw=%q fields=%d", payload, len(f))
 	}

internal/tunergenius/tunergenius.go

@@ -61,6 +61,7 @@ type Status struct {
 
 	FwdDbm float64 `json:"fwd_dbm"` // forward power [dBm], as reported
 	FwdW   float64 `json:"fwd_w"`   // forward power [W], derived from dBm
+	PeakW  float64 `json:"peak_w"`  // the device's own peak forward power [W] — what the meters show
 	SwrDb  float64 `json:"swr_db"`  // return loss [dB] as reported (negative = good match)
 	Vswr   float64 `json:"vswr"`    // VSWR ratio, derived from swr_db (1.0 = perfect)
 
@@ -405,7 +406,9 @@ func (c *Client) parse(resp string) {
 	if !strings.HasPrefix(data, "status") {
 		return
 	}
-	if data != c.lastRaw {
+	// One raw frame per session is enough to verify field alignment — the
+	// frames carry live meter values, so "log on change" logged every frame.
+	if c.lastRaw == "" {
 		c.lastRaw = data
 		applog.Printf("tunergenius: status raw=%q", data)
 	}
@@ -439,6 +442,13 @@ func (c *Client) applyStatus(data string) {
 		c.status.FwdDbm = v
 		c.status.FwdW = dbmToWatts(v)
 	}
+	// The device's OWN peak detector. A poll samples one instant of the envelope,
+	// so on SSB the plain "fwd" figure lands between syllables as often as on a
+	// peak — the widget read a few hundred watts on a kilowatt transmission. This
+	// is the number to display.
+	if v, ok := parseFloat(kv["peak"]); ok {
+		c.status.PeakW = dbmToWatts(v)
+	}
 	if v, ok := parseFloat(kv["swr"]); ok {
 		c.status.SwrDb = v
 		c.status.Vswr = returnLossToVswr(v)

internal/winkeyer/winkeyer.go

@@ -629,3 +629,11 @@ func isTimeout(err error) bool {
 	}
 	return strings.Contains(strings.ToLower(err.Error()), "timeout")
 }
+
+// TraceEnabled reports whether the protocol trace is running.
+//
+// The settings dialog needs it: the checkbox is React state that starts false on
+// every mount, so a trace switched on stayed on in the backend while the box
+// reappeared unticked — the operator ticks it again, which switches it OFF, and
+// the log they then send has no trace in it at all.
+func TraceEnabled() bool { return traceOn.Load() }

qrz_confirm_test.go

@@ -6,12 +6,22 @@ import (
 	"hamlog/internal/adif"
 )
 
-// What counts as a QRZ.com confirmation.
+// What counts as a QRZ.com confirmation: app_qrzlog_status = C, and nothing else.
 //
-// Reported 2026-07-29: after a confirmation download, every QSO turned to Y. The
-// test accepted qsl_rcvd = Y — but that is the operator's own PAPER QSL flag,
-// which they uploaded to QRZ themselves, so every QSO with a card came back
-// looking QRZ-confirmed. On a log full of paper QSLs that is most of it.
+// Narrowed twice, each time on evidence from an operator's own log.
+//
+// 2026-07-29 — qsl_rcvd = Y was accepted. That is the operator's own PAPER QSL
+// flag, which they uploaded to QRZ themselves, so every QSO with a card came
+// back looking QRZ-confirmed.
+//
+// 2026-07-31 — qrzcom_qso_download_status = Y was accepted, and this test said
+// it should be. A fetch showed both fields on ONE record:
+//
+//	<app_qrzlog_status:1>N  <qrzcom_qso_download_status:1>Y
+//
+// QRZ says not confirmed and sets the download field anyway: it marks what was
+// handed back, not what was confirmed. Eighteen QSOs, all "UPDATED", all green,
+// none of them confirmed on QRZ.
 //
 // This status feeds the award slots, so a false Y is a QSO counted as confirmed
 // when it is not — the reason the rule is narrow rather than generous.
@@ -21,8 +31,7 @@ func TestQRZRecordConfirmed(t *testing.T) {
 		rec  adif.Record
 		want bool
 	}{
-		// QRZ's own statements.
-		{"QRZ download status Y", adif.Record{"qrzcom_qso_download_status": "Y"}, true},
+		// QRZ's own statement.
 		{"QRZ log status C", adif.Record{"app_qrzlog_status": "C"}, true},
 		{"lower case is still QRZ's answer", adif.Record{"app_qrzlog_status": "c"}, true},
 		{"padded", adif.Record{"app_qrzlog_status": " C "}, true},
@@ -33,6 +42,14 @@ func TestQRZRecordConfirmed(t *testing.T) {
 		{"LoTW confirmed, QRZ silent", adif.Record{"lotw_qsl_rcvd": "Y"}, false},
 		{"eQSL confirmed, QRZ silent", adif.Record{"eqsl_qsl_rcvd": "Y"}, false},
 
+		// The download flag is not an answer: QRZ sets it on everything it returns.
+		{"downloaded, not confirmed", adif.Record{"qrzcom_qso_download_status": "Y"}, false},
+		{"the record from the report", adif.Record{
+			"call": "IQ4J", "band": "17m", "mode": "FT8",
+			"qrzcom_qso_upload_status": "Y", "app_qrzlog_status": "N",
+			"qrzcom_qso_download_date": "20260731", "qrzcom_qso_download_status": "Y",
+		}, false},
+
 		// Explicit negatives and nothing at all.
 		{"QRZ says no", adif.Record{"qrzcom_qso_download_status": "N"}, false},
 		{"QRZ status not confirmed", adif.Record{"app_qrzlog_status": "N"}, false},

recordable_mode_test.go

@@ -0,0 +1,22 @@
+package main
+
+import "testing"
+
+// Which modes produce a recording worth keeping.
+//
+// CW has moved in and out of this list: it was excluded because SmartSDR does
+// not route the operator's own sidetone through DAX, then restored because the
+// other station is captured all the same. Pinned so it does not drift back.
+func TestRecordableMode(t *testing.T) {
+	for _, m := range []string{"SSB", "USB", "LSB", "AM", "FM", "DV", "CW", "cw", " CW "} {
+		if !recordableMode(m) {
+			t.Errorf("recordableMode(%q) = false — it should be recorded", m)
+		}
+	}
+	// Digital audio is a modem tone nobody replays.
+	for _, m := range []string{"FT8", "FT4", "RTTY", "PSK31", "JT65", "", "DIGU"} {
+		if recordableMode(m) {
+			t.Errorf("recordableMode(%q) = true — digital modes carry no useful audio", m)
+		}
+	}
+}

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.22.2"
+	appVersion = "0.22.9"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.

wiki/Amplifiers-and-Switches.md

@@ -1,13 +1,47 @@
 # Amplifiers and Switches
 
-## PowerGenius XL (4O3A) amplifier
+## Amplifiers
 
-Direct TCP connection (Settings → PowerGenius):
+Settings → **Amplifier** is a **list**: configure several amps (e.g. two SPEs
+run in parallel), each with its own name and connection. Brands:
 
-- **Operate / Standby** and **fault** display.
-- **Fan-mode** selector (Standard / Contest / Broadcast).
-- When a Flex is connected, the amp controls + its **FWD / ID / TEMP** meters
-  appear in the FlexRadio panel's Amplifier card. See [[FlexRadio]].
+- **SPE Expert** (1.3K / 1.5K / 2K) — USB serial or an RS232-to-Ethernet
+  bridge. OPERATE/STANDBY, ON/OFF, Low/Mid/High power level, live status.
+  Switching the amplifier **on and off** uses the remote-on control lines, so
+  it needs the **USB (or RS-232) connection**, not a network bridge — the ON
+  button works even while the amplifier is off and reporting nothing.
+- **ACOM** (500S / 600S / 700S / 1200S / 2020S) — serial or bridge.
+  OPERATE/STANDBY/OFF, live power / SWR / PA temperature / band / fan.
+  Power-ON works over serial when the cable wires the DTR/RTS pins.
+- **PowerGenius XL** (4O3A) — direct TCP. Operate/Standby, fault display, and a
+  **fan-mode** selector (Standard / Contest / Broadcast).
+
+Where the controls appear:
+
+- An **amplifier card** in the FlexRadio panel and in **Station Control**:
+  OPERATE/STANDBY, ON/OFF, power level, output-power bar and live FWD /
+  drain-current / temperature meters. Several amps → one card each.
+- A **status chip per amp** in the bottom bar: green ON AIR = OPERATE, orange =
+  STANDBY, red = offline. Clicking it toggles OPERATE/STANDBY.
+- A **docked widget** (flame icon, next to the keyers): Operate, power ON/OFF,
+  the SPE power level and live watts / SWR / temperature, in the narrow column
+  format of the Tuner Genius widget. With several amplifiers configured, a
+  dropdown on the icon picks which one it shows — or **All**.
+
+### Band-follow (amp on a second COM port)
+
+An ACOM or SPE that normally polls the radio for its frequency can follow
+OpsLog instead: OpsLog answers the amp's polls **as a Kenwood rig** on a second
+COM port (Settings → Amplifier → frequency port). Useful when the real radio's
+CAT port is already taken by OpsLog itself.
+
+## Tuner Genius XL (4O3A)
+
+Settings → Tuner Genius (IP only; port fixed at 9010). Live **SWR and forward
+power** with peak-hold, **Tune / Bypass / Operate-Standby**, and the two
+channels A/B (source, frequency, antenna) shown and click-selectable. Available
+as a docked widget, a card in the FlexRadio panel and a card in Station
+Control. Direct TCP — uses one of the box's connection slots.
 
 ## Antenna Genius (4O3A) antenna switch
 
@@ -16,8 +50,20 @@ Over TCP / GSCP — a docked **A/B antenna-switch** widget:
 - One row per configured antenna, with a **Port A** and **Port B** button.
 - Colours: green = selected on port A, blue = selected on port B, red (pulsing) =
   that port is transmitting. Clicking a selected port deselects it (→ None).
-- **Band filter** (funnel icon in the header): shows only the antennas configured
-  for the current band, like the native app. Toggle it off to see all antennas.
-  Antennas with an unknown band mask are always shown.
+- **Band filter** (funnel icon): shows only the antennas configured for the
+  current band. Antennas with an unknown band mask are always shown.
 
 Configure the host / password in Settings → Antenna Genius.
+
+## Relay boards (Station Control)
+
+USB relay boards for antenna/accessory switching, with named buttons in Station
+Control: **Denkovi** (4/8 relays, FT245) and generic **CH340 / LCUS**
+USB-serial boards. A Test-connection button and detection feedback live in the
+setup panel.
+
+## Station Control
+
+The Station Control tab is a dashboard of fixed-width panels that wrap to fill
+the window — amplifier(s), tuner, relays, rotator, Ultrabeam… Drag a panel by
+the grip on its left edge to reorder; the order is remembered.

wiki/Audio-and-Keyers.md

@@ -2,35 +2,72 @@
 
 ## CW keyer
 
-A CW keyer with **macros** and F-key macros. The keyer **engine** is selectable
-(Settings → CW Keyer):
+A CW keyer with **macros** on F-keys (F1–F9; empty slots are hidden). The keyer
+**engine** is selectable (Settings → CW Keyer):
 
-- **WinKeyer** — K1EL WK1/2/3 over a COM port.
+- **WinKeyer** — K1EL WK1/2/3 over a COM port. The log names the generation
+  detected, and a byte-level trace can be enabled for bug reports.
+- **Serial port (DTR=CW / RTS=PTT)** — OpsLog keys CW by toggling a serial
+  control line itself, the hardware method N1MM/WSJT-X use with a Yaesu SCU-17
+  or a generic keying interface. No WinKeyer needed. Choose the COM port, which
+  line carries CW, and *Invert keying* for interfaces that key backwards. This
+  is also the engine for an **FTDX10** (whose CAT refuses `KY`), on the rig's
+  second COM port.
 - **Icom** — the radio's own keyer over CI-V, no extra hardware. Works over the
-  remote link too. (Requires the Icom CAT backend; set break-in to SEMI/FULL or
-  the rig keys the sidetone but stays in RX.)
+  remote link too. (Set break-in to SEMI/FULL or the rig keys the sidetone but
+  stays in RX.)
+- **FlexRadio (CWX)** — keys CW straight over the SmartSDR connection, with
+  type-ahead and mid-send backspace.
+- **Yaesu (rig keyer)** — the radio's internal keyer over CAT (`KY`), for the
+  FTDX101 / FT-991A / FT-710 family. See [[Yaesu]].
 - **TCI** — for TCI backends.
 
+**ESC** stops CW on whichever engine is active; typing a callsign aborts a
+running macro. `<LOGQSO>` inside a macro logs the contact at that exact point.
+**Auto-call** repeats a CQ with the gap you set measured *after* the message.
+
+### ESM — Enter Sends Message
+
+N1MM-style, for CW (Settings → CW Keyer). With the keyer on, **Enter** fires a
+macro by QSO stage instead of logging: empty callsign → F1 (CQ); callsign
+entered → F2 (report), focus jumps to RST; Enter in RST → F3 (TU), which logs
+if the macro contains `<LOGQSO>`.
+
 ## Digital Voice Keyer (DVK)
 
 Record **F1–F6** voice messages and transmit them. Set the audio devices, PTT
 method and gains in Settings → Audio.
 
-- **PTT** method: CAT, RTS, DTR, or none (VOX).
-- **Test PTT** keys the rig briefly. On CAT/OmniRig the key is held ~1.5 s so the
-  transmit command is actually sent (OmniRig is asynchronous and coalesces rapid
-  writes).
+- **PTT** method: CAT (whichever backend is active — every one supports PTT),
+  RTS, DTR, or none (VOX).
+- **Auto CQ** repeats a CQ-labelled message on a timer until you stop it.
+- The DVK refuses to transmit on non-phone modes — no speech on FT8.
+- A **message level** control (Settings → Audio) drives the rig at the right
+  level even from a quietly recorded microphone. If the rig transmits almost
+  nothing, check its rear-input setting (on an FTDX10: SSB MOD SOURCE = REAR).
 
 ## QSO audio recording
 
-Continuous rolling capture. On **Log QSO** the contact is saved to a per-QSO WAV
-(`CALL_YYYYMMDD_HHMMSS.wav`), mixing RX + mic. Configure the recordings folder,
-format (WAV / MP3), pre-roll and gains in Settings → Audio.
+Continuous rolling capture. On **Log QSO** the contact is saved to a per-QSO
+WAV/MP3 (`CALL_YYYYMMDD_HHMMSS`), with pre-roll. With automatic recording off, a
+**red dot** beside the callsign records the contact by hand.
+
+A recording can be **replayed on the air** to the station being worked, like a
+voice-keyer message — with its **own level**, separate from the voice keyer (a
+receiver line-out needs far less gain than a microphone). The play button
+becomes a **stop** button while it transmits. Hidden on CW.
+
+## CW decoder (RX audio → text)
+
+**Tools → CW decoder** (or the ear button) decodes received CW while the mode
+is CW: adaptive envelope with noise squelch, per-character dit/dah
+classification, follows 12–40 WPM and sloppy fists, rides QSB. Shows WPM /
+pitch / level, locks onto the FlexRadio CW pitch automatically, and clicking a
+decoded word fills the callsign. Clean-to-moderate signals decode solidly;
+weak-signal pileups remain CW Skimmer territory.
 
 ## RX audio monitor (USB rigs)
 
 Settings → Audio → **Listen to radio** pipes the rig's received audio (its "USB
-Audio CODEC" input) through your speakers, so you hear the radio inside OpsLog.
-**Talk to radio** keys PTT and pipes your mic to the rig's audio input. (Network
-audio for remote Icom is a work in progress — see
-[[Remote Icom over the Internet]].)
+Audio CODEC" input) through your speakers — the level applies live as you drag
+it. **Talk to radio** keys PTT and pipes your mic to the rig's audio input.

wiki/Awards.md

@@ -6,8 +6,15 @@ shared **globally** across profiles.
 ## Built-in awards
 
 DXCC, WAS / WAZ / WAC, WPX, IOTA / POTA / SOTA / WWFF, **DDFM** (French
-departments), and more — tracked **worked / confirmed / validated** by band and
-mode.
+departments), **DLD** (DARC DOK), **H26** (Helvetia 26 cantons), the US
+counties (USA-CA), and more — tracked **worked / confirmed / validated** by
+band and mode.
+
+The awards panel has a **mode filter** (All / CW / Phone / Digital) that
+applies to the whole award — bands, counts, confirmations and the contacts
+behind a cell — and stacks with the worked/confirmed filter, so "worked on CW
+but not confirmed on CW" is one click. Reference lists sort by reference or by
+description.
 
 ## How matching works
 
@@ -121,13 +128,20 @@ drop off the list. This is how you close the gaps a matcher can't fill on its ow
 
 ## Live detection & manual refs
 
-- References are detected **live** as you enter a callsign.
+- References are detected **live** as you enter a callsign — from the looked-up
+  address *and* from the QTH, name, country, comment, note or grid you typed.
+- An award can be marked **one reference per QSO** (used by DLD). When several
+  references then match the same contact, none is assigned silently — the
+  candidates are offered at log time and you pick. Off by default, so an n-fer
+  POTA activation still counts every park.
 - You can **manually assign** a reference to a QSO (the *Award Refs* tab of the
   QSO editor). It's stored in an ADIF extra (`APP_OPSLOG_AWARDREFS`) so it
   survives export/import — see [[Import and Export ADIF]] — and is honoured
   everywhere (award panel, grid columns, totals). For a list-backed award the
   assigned reference must still be a **valid, listed** reference, and the QSO
-  must be **in scope** (rule 5) for it to count.
+  must be **in scope** (rule 5) for it to count. A hand-assigned reference
+  **replaces** what the matcher found, so a correction survives the next
+  recompute.
 
 ## Reference lists & display
 

wiki/CAT-Control.md

@@ -1,28 +1,46 @@
 # CAT Control
 
-OpsLog has **four native CAT backends** (Settings → CAT). Each auto-reconnects
-and connects *non-blocking*, so a powered-off radio never freezes the app.
+OpsLog has **eight CAT backends** (Settings → CAT). Each auto-reconnects and
+connects *non-blocking*, so a powered-off radio never freezes the app. Backends
+are named by **how the radio is reached**:
 
 | Backend | Use it for |
 |---------|-----------|
 | **OmniRig** | Any OmniRig-supported rig (Rig 1 / Rig 2, hot-swap). |
-| **FlexRadio (SmartSDR)** | FlexRadio 6000/8000 over the TCP API. → [[FlexRadio]] |
-| **Icom CI-V** | Any Icom over **USB** *or* over the internet via its **LAN server**. → [[Icom]] · [[Remote Icom over the Internet]] |
+| **FlexRadio (API)** | FlexRadio 6000/8000 over the TCP API. → [[FlexRadio]] |
+| **Yaesu (USB)** | FTDX10 / FTDX101 family, direct serial — no OmniRig. → [[Yaesu]] |
+| **Kenwood (USB, network)** | TS-590 / TS-890 / TS-990 / TS-2000 (Elecraft K3/K4 speak the same dialect), serial or a `host:port` serial bridge. → [[Kenwood and Xiegu]] |
+| **Xiegu (USB)** | G90 / X6100 / X6200 / X5105 — CI-V with their reduced command set. → [[Kenwood and Xiegu]] |
+| **Icom (CI-V USB)** | Any Icom over USB. → [[Icom]] |
+| **Icom (CI-V network)** | An Icom's built-in LAN/internet server, replacing RS-BA1. → [[Remote Icom over the Internet]] |
 | **TCI** | SunSDR / ExpertSDR2 and any TCI (WebSocket) server. |
 
-Once connected, frequency / band / mode follow the radio, clicking a cluster spot
-tunes the rig, and (for Flex) cluster spots can be pushed to the panadapter.
+Once connected, frequency / band / mode follow the radio, clicking a cluster
+spot tunes the rig, and (for Flex) cluster spots can be pushed to the panadapter.
+
+## Sharing the rig with WSJT-X / JTDX / MSHV (rigctld)
+
+A native backend holds the radio's serial port **exclusively** — so OpsLog can
+serve its rig connection to other programs instead: **Settings → CAT → Share
+CAT**. In WSJT-X / JTDX / MSHV / Log4OM pick rig model **Hamlib NET rigctl** at
+`127.0.0.1:4532`. Works with every backend and both Hamlib command dialects.
+
+> Never point two programs at the same COM port. If another logger or WSJT-X
+> opens the rig's port directly while OpsLog holds it, you get "port busy"
+> errors, garbled CI-V frames and erratic rig behaviour. One master — OpsLog —
+> and everyone else through the shared rigctl port.
 
 ## OmniRig
 
 Pick **Rig 1** or **Rig 2** (the two OmniRig slots). Configure the actual COM
-port / baud in OmniRig's own settings. Works with anything OmniRig supports; PTT
-keying via CAT is supported where the rig's OmniRig profile exposes it.
+port / baud in OmniRig's own settings.
 
-## FlexRadio
-
-Enter the radio's IP (UDP discovery assists). You get a full SmartSDR-style
-control tab — see **[[FlexRadio]]**.
+- **VFO to read** — some OmniRig rig files declare the wrong active VFO (an
+  IC-7610 file declared VFO B). If the frequency looks frozen or follows the
+  wrong VFO, force **A** or **B** here.
+- OpsLog and OmniRig must run at the **same privilege level** — one elevated
+  ("as administrator") and not the other cannot see each other; OpsLog detects
+  and names this case.
 
 ## Icom CI-V (USB)
 
@@ -31,7 +49,7 @@ control tab — see **[[FlexRadio]]**.
 - **COM port** + **baud** must match the radio (set *CI-V USB Echo Back* **OFF**
   on the rig).
 - The model choice also tailors the console (e.g. attenuator steps: 20 dB on an
-  IC-7300, 6/12/18 dB on an IC-7610).
+  IC-7300, 6/12/18 dB on an IC-7610/7800).
 
 Full console details: **[[Icom]]**.
 
@@ -40,10 +58,30 @@ Full console details: **[[Icom]]**.
 Enter the TCI host + port (default 40001). Gives freq / mode / PTT / split and,
 optionally, panorama spots.
 
+## Serial lines (DTR / RTS)
+
+Windows raises the DTR and RTS lines when a serial port opens, and some
+interfaces read one of them as **PTT** — the radio goes into transmit the moment
+OpsLog connects. Others need the lines **high** to work at all. So:
+
+- **Xiegu** always lowers both on connect (a G90 behind a DE-19 keyed on open),
+  and has a setting for which line keys the rig.
+- **Yaesu and Kenwood** have an option (off by default) to lower both lines on
+  connect — turn it on only if your interface transmits as soon as OpsLog opens
+  the port.
+- **Icom CI-V** has always dropped them.
+
+## Protocol trace
+
+Settings → CAT can log the **raw protocol** (every CI-V frame, or every Kenwood
+command, as hex/text) to the diagnostic log — invaluable when reporting a radio
+that answers oddly. The checkbox shows whether the trace is really running.
+
 ## Notes
 
 - The **digital sub-mode** (FT4 vs FT8) is inferred from the frequency.
+- A radio reporting LSB or USB selects **SSB** in the entry form.
 - **Per-band Flex RX/TX antennas** can be configured and are applied
-  automatically on band change (Settings → FlexRadio).
+  automatically on band change (Settings → CAT → FlexRadio).
 - Split, RIT/XIT and other rig-specific features are exposed on each backend's
   control tab where supported.

wiki/DX-Cluster-and-Spots.md

@@ -3,27 +3,39 @@
 ## Servers
 
 Add multiple cluster servers (Settings). They auto-reconnect; one is the
-**master** used for sending commands. The Cluster tab and the Main-view cluster
-pane share the same live feed.
+**master** used for sending commands. A quiet node is not treated as a dead one
+— silence keeps its session, login and filters. The Cluster tab and the
+Main-view cluster pane share the same live feed.
 
 ## Filter sidebar
 
 A show/hide **filter sidebar** (shared by the Cluster tab and the Main pane):
 
 - **Callsign** search, **hide worked**, **group duplicates**.
-- Filter by **band / mode / status / source**.
+- Filter by **band / mode / status / source**, plus **NEW POTA** and
+  **NEW COUNTY** chips.
 
 ## Per-spot status and tuning
 
 Each spot is coloured by **status** relative to your log:
 
-- **new** (entity never worked), **new-band**, **new-slot**, **worked**.
+- **new** (entity never worked), **new-band**, **new-mode**, **new-slot**,
+  **worked**.
+- Settings → General → **Group digital modes as one (DXCC-style)** makes
+  FT8/FT4/RTTY/PSK count as a single Digital mode for the colouring and the
+  matrix badges, matching how DXCC counts.
 
 Click a spot to **tune the rig** (fills the callsign into the entry strip). A
-multi-band **Band Map** shows panadapter-style strips per band.
+multi-band **Band Map** shows panadapter-style strips per band — its CW / data
+/ phone sub-bands use their own colour-blind-checked hues, and **Ctrl+↑ /
+Ctrl+↓** jumps to the next spot above/below the current frequency and tunes it.
 
 **POTA** spots are tagged with their park reference (via `api.pota.app`).
 
+The entry strip's band matrix can also show the **ClubLog Most Wanted rank**
+(Settings → General): an `MW #rank` pill next to the entity name, personalised
+to your callsign, refreshed daily.
+
 ## Sending a spot
 
 Use the **Send Spot** window to announce a DX spot on the master cluster:
@@ -35,6 +47,12 @@ frequency** (full resolution, including sub-kHz).
 **Tools → Alert management** — Log4OM-style alert rules on **call / country /
 band / mode / spotter**, with **sound**, **visual** and **e-mail** notification.
 Active alerts appear as a discreet bell in the entry strip; click it for the
-list. Alerts are kept briefly and only shown when active.
+list.
+
+## External spot sources
+
+A **DXHunter** remote-call UDP packet fills the callsign, and when it carries
+`<FREQ>` and `<MODE>` it also tunes whichever CAT backend is active. See
+[[Settings and Data]] for the UDP configuration.
 
 See also: [[Maps and Antennas]] for turning the beam to a spot.

wiki/Home.md

@@ -1,10 +1,11 @@
 # OpsLog
 
 A modern, fast ham-radio logger for **Windows** — Log4OM-style entry, real-time
-CAT for **OmniRig**, native **FlexRadio/SmartSDR**, native **Icom CI-V** (USB
-*and* remote-over-internet, replacing RS-BA1) and **TCI** (SunSDR / Expert
-Electronics), a DX cluster with spot alerts, awards tracking, maps, contest
-logging, QSL management and a QSL-card designer.
+CAT for **OmniRig**, native **FlexRadio/SmartSDR**, **Icom CI-V** (USB *and*
+remote-over-internet, replacing RS-BA1), **Yaesu**, **Kenwood**, **Xiegu** and
+**TCI** (SunSDR / Expert Electronics) — with **CAT sharing** so WSJT-X & co use
+the same rig link — a DX cluster with spot alerts, awards tracking, maps,
+contest logging, QSL management and a QSL-card designer.
 
 Built with **Wails v2** (Go backend + React/TypeScript frontend), **pure Go**
 (no CGO). SQLite holds the configuration; the logbook can be the local SQLite
@@ -18,14 +19,15 @@ Developed by **F4BPO**.
 1. **[[Installation]]** — download / build and first launch.
 2. **[[Getting Started]]** — the entry strip, logging your first QSO, choosing a
    profile.
-3. **[[CAT Control]]** — connect your radio (OmniRig, FlexRadio, Icom, TCI).
+3. **[[CAT Control]]** — connect your radio (OmniRig, FlexRadio, Icom, Yaesu,
+   Kenwood, Xiegu, TCI).
 
 ## What OpsLog does
 
 | Area | Pages |
 |------|-------|
 | Enter and manage QSOs | [[Logging Basics]] · [[Recent QSOs and Filters]] · [[Import and Export ADIF]] |
-| Control your radio | [[CAT Control]] · [[FlexRadio]] · [[Icom]] · [[Remote Icom over the Internet]] |
+| Control your radio | [[CAT Control]] · [[FlexRadio]] · [[Icom]] · [[Remote Icom over the Internet]] · [[Yaesu]] · [[Kenwood and Xiegu]] |
 | Chase DX | [[DX Cluster and Spots]] · [[Maps and Antennas]] |
 | Station hardware | [[Amplifiers and Switches]] · [[Audio and Keyers]] |
 | Events & contests | [[Contest Logging]] · [[Net Control]] · [[Multi-Operator Live Status]] |

wiki/Import-and-Export-ADIF.md

@@ -8,22 +8,34 @@ export modes.
 
 Import an `.adi` / `.adif` file into the active profile's logbook. On import,
 OpsLog parses every field, maps standard fields to columns and keeps unknown but
-valid ADIF fields in a per-QSO **extras** store (editable later). Country / zones
-are enriched from `cty.dat` where missing.
+valid ADIF fields in a per-QSO **extras** store (editable later). Country /
+zones are enriched from `cty.dat` where missing. A file **without a header**
+(records pasted from another log) imports fine.
+
+- **Field remapping**: the import dialog can move a field as it reads it —
+  e.g. the RSGB IOTA contest exports the island reference in `STATE`; add a
+  `STATE → IOTA` row and it lands where the award looks.
+- **Fill from profile**: optionally stamps your station fields *and* your
+  default confirmation statuses (paper QSL, LoTW, eQSL, Club Log, HRDLog,
+  QRZ.com) on QSOs the file leaves empty — a WSJT-X log carries almost none.
+  Existing values are never overwritten.
 
 ## Export
 
 - **Whole log**, **selected rows**, or the **filtered view** (no limit) — see
   [[Recent QSOs and Filters]].
-- **Standard** mode exports the common promoted fields; **All** mode also exports
-  every extra field.
+- **Standard** mode exports the common promoted fields; **All** mode also
+  exports every extra field; **Choose fields…** opens a picker that separates
+  the official ADIF 3.1.7 fields (by category) from the OpsLog / non-standard
+  tags actually present in your log, with All/None per group. Your selection is
+  remembered.
 - **Cabrillo** export for contest submission.
 
 ## Round-trip safety
 
 Award references you assign manually are stored in an ADIF extra field
-(`APP_OPSLOG_AWARDREFS`), so exporting your full log and re-importing it does not
-lose your award-reference assignments.
+(`APP_OPSLOG_AWARDREFS`), so exporting your full log and re-importing it does
+not lose your award-reference assignments.
 
 ## Tips
 

wiki/Kenwood-and-Xiegu.md

@@ -0,0 +1,49 @@
+# Kenwood and Xiegu (native CAT)
+
+## Kenwood (USB, network)
+
+A native backend talks straight to a **TS-590 / TS-890 / TS-990 / TS-2000**
+over its serial port — frequency, mode, VFO, split and PTT, no OmniRig in
+between. **Elecraft K3/K4** speak the same dialect. Pick **Kenwood (USB,
+network)** in Settings → CAT.
+
+- **Serial**: COM port + baud.
+- **Network**: give a `host:port` instead — for a serial bridge (ser2net, an
+  Ethernet-serial adapter). *Not* the radio's own RJ45, which speaks Kenwood's
+  KNS/ARCP protocol.
+- Split is detected from FR/FT when the radio omits it from its status frame.
+- The backend was tested end-to-end against a TS-2000 emulator and reports
+  useful errors: a port that opens but stays silent is distinguished from one
+  sending data that never answers (the error quotes what arrived).
+
+## Xiegu (G90, X6100, X6200, X5105)
+
+These radios speak CI-V but with a **reduced command set** (no scope, no DSP
+block, no data mode), so they have their own backend — pick **Xiegu (USB)** in
+Settings → CAT. Frequency, mode, split and PTT.
+
+### PTT on a G90 — read this
+
+A **G90 ignores the CI-V PTT command**. That has three consequences:
+
+1. In the Xiegu settings, choose **how the rig is keyed**: CI-V command, RTS or
+   DTR — pick the hardware line your interface wires to PTT.
+2. WSJT-X & co transmit through OpsLog's **shared CAT link** (Hamlib NET rigctl
+   `127.0.0.1:4532` — see [[CAT Control]]): OpsLog converts the PTT request
+   into the hardware line. This is the supported path and it works.
+3. **WSJT-X + OmniRig will NOT transmit** a G90: OmniRig sends PTT as a CI-V
+   command, which the radio ignores. Either use the native Xiegu backend +
+   rigctl sharing, or configure the PTT line (RTS/DTR) inside OmniRig itself.
+
+### Keying on connect
+
+Behind an interface that carries PTT on a modem line (e.g. a DE-19), a G90 used
+to go **straight into transmit when OpsLog connected** — Windows raises DTR and
+RTS when a serial port opens. The Xiegu backend now drops both lines on
+connect, then drives only the line you selected for keying.
+
+## Notes
+
+- Both backends refuse a CI-V/CAT frame read at the wrong offset, so a garbled
+  answer can no longer turn into a phantom frequency.
+- The protocol trace (Settings → CAT) covers both — see [[CAT Control]].

wiki/Logging-Basics.md

@@ -10,8 +10,24 @@ save. Fields: callsign, RST tx/rx, name, QTH, grid, band, mode, TX/RX frequency
   CQ/ITU zones, continent) from `cty.dat` including `/MM` `/AM` `/B` and call-area
   handling (`/8`, `/W6`), plus **ClubLog** DXpedition date overrides.
 - **Callsign lookup** (QRZ.com / HamQTH) fills name / QTH / grid and shows the
-  photo and a QRZ.com tab. Configure it in Settings → Lookup.
+  photo and a QRZ.com tab. Configure it in Settings → Lookup. Portable calls
+  (`/M`, `/P`) are looked up on the home call too.
+- **No lookup account?** The name / QTH / locator are recovered from the **last
+  time you worked the station**, and for US calls the offline **FCC (ULS)**
+  database fills state, county and a 6-character grid as you type. A real
+  QRZ/HamQTH hit still wins.
+- A green **NEW** badge appears on the County field (Info / F2) when the US
+  county has never been worked.
 - **ESC** clears the callsign (and stops CW).
+- The frequency readout is **scroll-tunable**: roll the wheel over the
+  hundreds / tens / units-of-kHz digit and the rig follows.
+
+## Super Check Partial / N+1
+
+Enable in Settings → General (downloads the community MASTER.SCP list). As you
+type a call, a docked two-column widget shows known calls that **contain** what
+you typed (Partial) and calls **one character away** (N+1) — click one to fix a
+busted call.
 
 ## Editing a QSO
 
@@ -22,14 +38,18 @@ fields** editor for any ADIF field not promoted to a column.
 
 ## Bulk operations
 
-Select rows in Recent QSOs, right-click:
+Select rows in Recent QSOs (a **Select all** button takes every displayed row),
+right-click:
 
-- **Fix country & zones** from `cty.dat`, or **update from QRZ / ClubLog**.
-- **Bulk edit field** — set one field across many QSOs (QSL/upload status, my
-  station, contest, propagation, contacted-station refs, comment…). Great for
-  flipping a batch to *Requested* before an upload.
+- **Fix country & zones** from `cty.dat`, or **update from the callsign
+  databases** (QRZ / ClubLog), with a progress bar.
+- **Bulk edit field** — set one field across many QSOs: QSL/confirmation
+  statuses *and dates*, my station, contest, propagation, contacted-station
+  refs, comment, **gridsquare**, even the **frequency** (band recomputed,
+  out-of-band values refused).
 - **Send to** a QSL service, **export** selected / filtered to ADIF or Cabrillo,
-  **delete**.
+  **delete** (optionally withdrawing the QSO from QRZ.com and Club Log —
+  Settings → External services, off by default).
 
 ## Find duplicates
 
@@ -40,6 +60,9 @@ same day or same minute) and lets you pick which to delete.
 
 - **Worked-before matrix** shows prior contacts with the entity per band/mode
   slot as you type.
-- Awards references are detected **live** as you enter a call (see [[Awards]]).
+- Award references are detected **live** as you enter a call — including from
+  the QTH, name, comment or grid you typed (see [[Awards]]).
+- The callsign in the top bar is the **station switcher**: click it to change
+  profile.
 
 See also: [[Recent QSOs and Filters]] · [[Import and Export ADIF]]

wiki/Maps-and-Antennas.md

@@ -3,36 +3,48 @@
 ## Main view
 
 The Main view is **two configurable panes** (per profile, Settings → General →
-*Main view*). Choose from: great-circle map, locator (street) map, the cluster
-grid, the worked-before grid, recent QSOs, the **FlexRadio** controls, the
-**Icom** console, or the **Net control** panel.
+*Main view*), with a **draggable divider** between them (double-click it to
+even them out). Choose from: great-circle map, locator (street) map, the
+cluster grid, the worked-before grid, recent QSOs, the **FlexRadio** controls,
+the **Icom** or **Yaesu** console, or the **Net control** panel.
 
 ## Great-circle map
 
 - Short/long-path **distance & azimuth** to the worked station.
-- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite (all
-  labelled).
+- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite.
 - The **antenna beam lobe(s)** are drawn from the rotor azimuth.
+- **Day/night terminator** and twilight band (button at the top right).
 
 ## Locator (street) map
 
 An OSM street map centred on the contacted grid square — handy for local /
 portable contacts. No API key.
 
-## Rotor compass
+## Rotators
 
-An azimuthal-equidistant **click-to-turn** compass driven by **PstRotator**. The
-current heading and target are shown; click a bearing to turn the rotor.
+An azimuthal-equidistant **click-to-turn** compass; the current heading and
+target are shown. Three rotator types (Settings → Rotator):
 
-## Ultrabeam
+- **PstRotator** — via its UDP interface.
+- **microHAM ARCO** — native, over LAN or USB: set the ARCO's CONTROL PROTOCOL
+  to *Yaesu GS-232A*.
+- **GS-232A (generic)** — any GS-232A controller, ERC (Easy Rotor Control)
+  included; serial speed selectable. Set an ERC to GS-232 emulation, not
+  Hy-Gain DCU-1.
 
-Ultrabeam antennas are supported with three modes — **Normal**, **180° reverse**,
+## Motorized antennas (Ultrabeam / SteppIR)
+
+Both follow the **rig frequency** (band change → retune) and retune immediately
+when you click a spot, with three modes — **Normal**, **180° reverse**,
 **Bidirectional**:
 
 - The **radiating direction** is shown in green and the **mechanical boom** in
-  grey, on both the compass and the map, so you always know where the antenna
-  actually points.
-- The antenna **follows the rig frequency** (band change → retune), and retunes
-  immediately when you click a spot.
+  grey, on both the compass and the map.
+- On a FlexRadio, transmit is **inhibited while the elements move**, and
+  released as soon as the antenna is tuned.
+- **SteppIR — Tunable range** (Settings → Hardware → Antenna, default
+  13–54 MHz): outside it OpsLog leaves the antenna and the TX interlock
+  completely alone, so tuning to 30 m on a 20 m–6 m SteppIR does nothing.
 
-Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch).
+Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch, Tuner
+Genius, relays).

wiki/Profiles-and-Databases.md

@@ -6,18 +6,29 @@ Every setting in OpsLog is **per-profile**: station identity, CAT, lookup, QSL
 defaults, awards display, antennas, and which logbook to use. Create one profile
 per callsign / station / event.
 
-Switch or manage profiles in Settings. The active profile decides which logbook
-your QSOs go to.
+The **callsign in the top bar is the station switcher** — click it and pick a
+profile. Managing profiles is at the bottom of that list (and in Settings).
 
-## Config vs. logbook — two different stores
+## Two separate databases
+
+Since 0.21.0 the settings and the QSOs live in **separate files**:
 
 | Store | What | Where |
 |-------|------|-------|
-| **Config** | settings, profiles, rigs/antennas, cluster nodes, lookup cache, award lists, QSL templates | always the **local SQLite** file under `data/` |
-| **Logbook** | your QSOs | where the active profile points — local SQLite **or** shared MySQL |
+| **Settings database** (`settings.db`, or `opslog.db` on older installs) | settings, profiles, rigs/antennas, cluster nodes, lookup cache, award lists, QSL templates | always the **local SQLite** file under `data/` |
+| **Logbook** (`logbook.db`) | your QSOs | where the active profile points — a local SQLite file **or** shared MySQL |
 
-Keeping config local means the UI is instant even when the logbook is a far-away
-MySQL server.
+Keeping the settings local means the UI is instant even when the logbook is a
+far-away MySQL server. Settings → Database shows the two as separate sections,
+with an *Open folder* shortcut; a logbook file can be **renamed or relocated**
+(its QSOs move with it), and the status bar names the **logbook** file — that
+is the one to back up.
+
+A profile can point at its **own logbook file** — ideal for a visiting
+operator, whose contacts stay out of your log without touching your settings.
+
+**Portable**: paths inside the OpsLog folder are stored relative to it, so
+moving the whole folder to another drive or PC loses nothing.
 
 ## Shared MySQL logbook (multi-operator)
 
@@ -25,11 +36,18 @@ Point a profile's logbook at a **MySQL** database so several operators run **one
 log** — e.g. a multi-op special-event call. Configure the host / database /
 credentials in the profile's database settings.
 
-This is also what powers [[Multi-Operator Live Status]] (each instance heartbeats
-its activity into a `live_status` table).
+- The database and tables are converted to **utf8mb4** on connect, so Cyrillic
+  or Polish characters from a QRZ lookup store correctly even when the hosting
+  panel created the database as latin1.
+- An FT8/MSHV QSO that cannot reach a laggy shared database is **parked and
+  re-logged automatically** once it recovers — no lost QSOs.
+- Switching to a profile whose MySQL is unreachable shows a clear warning
+  instead of silently staying on the previous logbook.
+
+This is also what powers [[Multi-Operator Live Status]].
 
 ## Backups
 
 Optional **database + ADIF backup at shutdown** (Settings → Backup). Regardless,
-copying the `data/` folder backs up your config and local logbook. See
+copying the `data/` folder backs up your settings and local logbook. See
 [[Settings and Data]].

wiki/Recent-QSOs-and-Filters.md

@@ -4,13 +4,23 @@
 
 The main log table. Double-click a row to edit; right-click for bulk actions
 (see [[Logging Basics]]). Columns are configurable — click **Columns** to choose
-which are visible; your selection is saved (per profile).
+which are visible; widths, order and hidden columns are saved (per profile),
+with a separate layout for the narrower Main-tab pane.
+
+- The selected-row count is always visible at the top, and a **Select all /
+  Unselect all** button takes every displayed row.
+- QSL and upload status columns are coloured: **Y** green, **N** red, **R**
+  blue.
+- A **Distance (km)** column (also in Worked-before) is computed from the QSO's
+  own locator pair.
+- There are **no per-column header filters** — they only ever searched the rows
+  on screen, which made a QSO further back in the log look missing. Use the
+  advanced filter, which queries the whole logbook.
 
 ### Award columns
 
-Each defined award can show a column with the reference the QSO counts for. These
-columns are **hidden by default** and opt-in from the Columns picker — turn on
-only the awards you're chasing. Your choice persists across restarts.
+Each defined award can show a column with the reference the QSO counts for.
+These columns are **hidden by default** and opt-in from the Columns picker.
 
 ## Advanced filter builder
 
@@ -19,15 +29,19 @@ Click the filter button to open the **QSO filter builder** (Log4OM-style):
 - Add one or more **conditions**: *field · operator · value*.
 - Operators: equals, not-equal, contains, starts/ends with, greater/less
   (or equal), is empty, is not empty.
+- Fields include every confirmation **status and date** (sent / received,
+  before / after) for paper QSL, LoTW, eQSL, Club Log, HRDLog and QRZ.com.
+  Field names stay in English — they are ADIF names, a standard vocabulary.
 - Join conditions with **ALL (AND)** or **ANY (OR)**.
 - Save named **presets** (they travel with the `data/` folder).
-- The field dropdown is sorted alphabetically to find things fast.
 
-The filtered view can be exported: **selected rows** or the **whole filtered
-view** (no row limit) → ADIF or Cabrillo.
+A filter shows **every** match (the on-screen row limit only applies to the
+unfiltered log; safety cap 10 000). The filtered view can be exported:
+**selected rows** or the **whole filtered view** → ADIF or Cabrillo.
 
 ## Worked-before matrix
 
 As you type a callsign, the worked-before grid shows prior contacts with that
 **entity**, arranged by band/mode slot, so you instantly see what's new (new
-DXCC / new band / new slot) versus already worked.
+DXCC / new band / new slot) versus already worked. Its right-click menu offers
+the same bulk edit and export as the main grid.

wiki/Settings-and-Data.md

@@ -4,48 +4,58 @@
 
 A `data/` folder is created **next to `OpsLog.exe`**:
 
-- **Config** (SQLite): settings, profiles, rigs/antennas, cluster nodes, lookup
-  cache, award lists, QSL templates. Always local, so the UI is instant.
-- **Local logbook** (SQLite): QSOs, when the profile logs locally.
+- **Settings database** (SQLite): settings, profiles, rigs/antennas, cluster
+  nodes, lookup cache, award lists, QSL templates. Always local.
+- **Logbook** (`logbook.db`, SQLite): QSOs, when the profile logs locally.
 - `data/qsl/templates/…` — QSL card templates and their photos.
 - `data/qsl/outbox/…` — sent QSL card JPEGs.
 - Recordings folder (configurable) — per-QSO WAV/MP3.
-- Backups.
+- Backups, diagnostic logs.
 
-Back up your setup by copying `data/` (and keep it with the exe). See
+Paths are stored **relative to the folder**, so the whole OpsLog directory can
+move to another drive or PC. Back up your setup by copying `data/`. See
 [[Profiles and Databases]] for local-vs-MySQL logbooks.
 
 ## Settings map
 
 | Section | What |
 |---------|------|
-| **General** | language, theme, Main-view panes, live-status publish |
-| **Station** | your callsign, grid, name, address (my-station ADIF) |
-| **CAT** | radio backend + connection ([[CAT Control]]) |
+| **General** | language, theme, date format (US / FR / Standard), Main-view panes, digital-modes grouping, Super Check Partial, ClubLog exceptions & Most Wanted |
+| **Station** | your callsign, grid, name, address (my-station ADIF) — hand-corrected CQ/ITU zones stay corrected |
+| **CAT** | radio backend + connection, CAT sharing (rigctld), protocol trace ([[CAT Control]]) |
 | **Lookup** | QRZ.com / HamQTH credentials |
-| **FlexRadio** | per-band RX/TX antennas |
-| **Audio** | DVK / recorder devices, PTT, gains, RX monitor |
-| **CW Keyer** | WinKeyer / Icom / TCI engine + macros |
-| **External services** | LoTW (TQSL), QRZ, eQSL, ClubLog, HRDLog, POTA |
-| **Email** | SMTP for eQSL-by-email |
-| **PowerGenius / Antenna Genius / Rotator / Ultrabeam** | station hardware |
+| **Audio** | DVK / recorder devices, PTT, gains and levels, RX monitor |
+| **CW Keyer** | engine (WinKeyer / Serial / Icom / Flex CWX / Yaesu / TCI), macros, ESM |
+| **External services** | LoTW (TQSL), QRZ, eQSL, ClubLog, HRDLog, POTA, Cloudlog/Wavelog |
+| **Email** | SMTP for eQSL-by-email and *Send log to F4BPO* |
+| **Amplifier / Tuner Genius / Antenna Genius / Rotator / Antenna** | station hardware ([[Amplifiers and Switches]] · [[Maps and Antennas]]) |
+| **Database** | settings DB + this profile's logbook, rename/relocate |
 | **Backup** | database + ADIF backup at shutdown |
 
 ## Appearance & language
 
 Four themes (Warm light, Warm dark, Graphite dark, High contrast) plus **Auto**
-(follows the OS). Full **English / French** UI with a first-run flag chooser and
-a switcher in Settings → General.
+(follows the OS); fresh installs start dark. Full **English / French** UI with
+a first-run flag chooser and a switcher in Settings → General. **Ctrl + wheel**
+zooms the whole UI (remembered; Ctrl+0 resets). The window title bar is drawn
+by OpsLog — drag the top bar to move, double-click to maximise — and the window
+reopens on the screen it was closed on.
 
-## Integrations (outbound UDP)
+## UDP integrations
 
-Push the current frequency to **PstRotator**, radio info in **N1MM `RadioInfo`**
-format, or an **ADIF record on each logged QSO** — so external tools stay in sync.
+- **Inbound**: WSJT-X / MSHV / JTDX QSO logging and status (unicast or
+  multicast), and DXHunter remote-call packets (fills the callsign, tunes the
+  rig when the packet carries `<FREQ>`/`<MODE>`).
+- **Outbound**: the current frequency to **PstRotator**, radio info in **N1MM
+  `RadioInfo`** format, or an **ADIF record on each logged QSO**.
 
 ## Other
 
-- **Autostart** external programs (WSJT-X, JTAlert, rotator control…) at launch,
-  skipping any already running.
-- **Update check** at startup (toggleable).
+- **Autostart** external programs (WSJT-X, JTAlert, rotator control…) at
+  launch, skipping any already running.
+- **Update check** at startup, when opening Help → About, and every 5 minutes.
+  A "What's new" summary appears on the first launch after each update.
+- **Help → Send log to F4BPO** (shown when SMTP is configured) e-mails the
+  diagnostic logs straight to the developer.
 - **Anonymous usage telemetry** — a once-a-day heartbeat (random install ID +
   version + OS; no callsign or QSO data). Opt out in Preferences.

wiki/Troubleshooting.md

@@ -2,57 +2,77 @@
 
 ## Where's the log file?
 
-OpsLog writes a diagnostic log. The path is shown in Settings (and can be opened
-from there). When reporting a problem, include the relevant lines — they're
-prefixed by subsystem (`Flex:`, `icom net:`, `icom scope`, `antgenius:`,
-`cluster:`, `qslmgr:log`, `audio:`…).
+OpsLog writes a diagnostic log. The path is shown in Settings (and can be
+opened from there). When reporting a problem, include the relevant lines —
+they're prefixed by subsystem (`cat:`, `Flex:`, `icom net:`, `antgenius:`,
+`cluster:`, `qslmgr:log`, `audio:`…). With an SMTP server configured, **Help →
+Send log to F4BPO** e-mails the logs straight to the developer.
+
+A crash no longer leaves a blank window: the error is shown on screen,
+selectable, with a copy button.
 
 ## CAT
 
 - **Radio not connecting** — check the backend fields (COM port + baud for USB;
-  IP/credentials for network). OpsLog connects non-blocking, so it won't freeze —
-  watch the CAT status.
-- **Icom: no CAT at all over USB** — the CI-V address must match the radio; pick
-  your **model** from the dropdown (it sets the address) and set *CI-V USB Echo
-  Back* **OFF** on the rig.
-- **Icom scope blank on an IC-7300** — this was a bug where the scope decoder was
-  chosen from the configured CI-V address; it now uses the model detected from the
-  CI-V ID, so a single-scope rig run at address `0x98` decodes correctly. Update
-  to the latest build.
-- **Icom attenuator button does nothing** — the dB steps are model-specific; make
-  sure the right model is selected (IC-7300 = 20 dB, IC-7610 = 6/12/18 dB).
+  IP/credentials for network). The CAT log line carries the error explaining a
+  disconnection.
+- **"Serial port busy" in the log** — another program holds the COM port
+  (WSJT-X, MSHV, another logger configured for direct CAT). Only one program
+  can own the port: let OpsLog hold it and point the others at **Hamlib NET
+  rigctl 127.0.0.1:4532** (Settings → CAT → Share CAT). Two masters on one
+  CI-V bus also cause garbled frames and erratic behaviour.
+- **The radio transmits as soon as OpsLog connects** — your interface reads DTR
+  or RTS as PTT. Xiegu drops the lines automatically; on Yaesu and Kenwood
+  enable the *lower DTR/RTS on connect* option. (It is off by default because
+  other interfaces stop transmitting with the lines low.)
+- **WSJT-X won't key a Xiegu G90 through OmniRig** — a G90 ignores the CI-V PTT
+  command. Use the native Xiegu backend (which keys RTS/DTR) + rigctl sharing,
+  or set the PTT line inside OmniRig. See [[Kenwood and Xiegu]].
+- **OmniRig frequency frozen / wrong VFO** — set **VFO to read** (A or B) in
+  the OmniRig backend settings; some rig files declare the wrong VFO.
+- **"OmniRig not found" with OmniRig running** — one of the two runs as
+  administrator and the other doesn't. Start both the same way.
+- **Icom: no CAT at all over USB** — the CI-V address must match the radio;
+  pick your **model** from the dropdown (it sets the address) and set *CI-V USB
+  Echo Back* **OFF** on the rig.
+- **A radio that answers oddly** — enable the **protocol trace** (Settings →
+  CAT): every frame to and from the rig lands in the log as hex, which turns a
+  guess into a diagnosis.
 
 ## Remote Icom
 
 - **Login rejected** → wrong Network User1 name/password.
 - **Can't bind local port** → the Icom **Remote Utility is still running** —
   close it.
-- **Link drops with the scope on** → receive-side retransmit should hold it; if
-  not, check network quality and the `icom net:` log lines. See
+- **Frequency frozen after another program took the CI-V session** — OpsLog
+  reconnects on its own; if it doesn't, check the `icom net:` log lines. See
   [[Remote Icom over the Internet]].
 
 ## FlexRadio
 
-- **A control reads 0 / stale at startup** — some SmartSDR status fields use short
-  names (e.g. the TX filter is reported as `lo`/`hi`, not `filter_low/high`). If a
-  value never populates, capture the `Flex: … status` log line and report it.
-- **Antenna wrong band on a spot click** — fixed: `SetFrequency`/`SetMode` update
-  the slice cache immediately so the panel and the Ultrabeam follow don't chase a
-  stale frequency.
+- **A control reads 0 / stale at startup** — some SmartSDR status fields use
+  short names. If a value never populates, capture the `Flex: … status` log
+  line and report it.
+- **SmartSDR CAT keeps disconnecting while OpsLog is open** — fixed: OpsLog now
+  binds only to the actual SmartSDR/Maestro GUI client. Update.
+- **"Interlock is preventing transmission" with a SteppIR** — see the tunable
+  range setting in [[Maps and Antennas]].
 
 ## Multi-op live status PHP
 
 `Connection refused` from the PHP page is almost always MySQL `bind-address =
-127.0.0.1` or a firewall/grant issue — see
-[[Multi-Operator Live Status]].
+127.0.0.1` or a firewall/grant issue — see [[Multi-Operator Live Status]].
 
 ## DVK / PTT
 
-- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the async
-  OmniRig write is actually sent; if it still doesn't key, the rig's OmniRig
-  profile may not expose CAT TX keying — use RTS/DTR or VOX.
+- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the
+  async OmniRig write is actually sent; if it still doesn't key, the rig's
+  OmniRig profile may not expose CAT TX keying — use RTS/DTR or VOX.
+- **A voice message transmits almost nothing** — raise the message level
+  (Settings → Audio) and check the rig's rear-input setting (FTDX10: SSB MOD
+  SOURCE = REAR).
 
 ## Still stuck?
 
-Open an issue with: what you did, what happened, your radio/model, and the
-relevant log lines.
+Open an issue (or *Send log to F4BPO*) with: what you did, what happened, your
+radio/model, and the relevant log lines.

wiki/Yaesu.md

@@ -0,0 +1,47 @@
+# Yaesu (native CAT)
+
+A native backend talks to an **FTDX10 / FTDX101** (and close relatives) directly
+over the rig's USB/serial port — no OmniRig. Pick **Yaesu (USB)** in
+Settings → CAT: COM port + baud (FTDX10/101 default 38400).
+
+Frequency, mode, VFO A/B (MAIN/SUB on the 101), split and PTT are covered, and
+OpsLog **follows the VFO you are actually on** — the displayed frequency, the
+logged frequency and the VFO a cluster spot tunes. Split is worked out from
+which VFO transmits, so simplex on the SUB receiver is not shown as split.
+
+## The Yaesu console
+
+With the native backend connected, a console tab (and a Main-view pane) gives:
+
+- **S / PO / SWR meters** — power in watts on a curve measured against the rig's
+  own display, SWR as the ratio itself, with peak-hold so they stay readable
+  between CW words or SSB syllables.
+- **Band and mode buttons** — CW, RTTY, DIGI and PSK show their sideband; click
+  the active button again to switch it.
+- AF / RF / squelch, AGC, IPO–AMP1–AMP2, 6/12/18 dB attenuator, NB, DNR, narrow
+  filter, power, mic gain, VOX, split and **ATU tune**.
+- **SPLIT** places the transmit VFO up 1 kHz on CW/data, up 5 kHz on phone.
+- In CW the mic gain and VOX give way to a **CW card**: keyer speed, break-in
+  and ZIN (zero-in).
+
+Sliders only respond to the mouse wheel after you click them, so scrolling the
+panel can't change the transmit power by accident.
+
+## CW with the rig's own keyer
+
+A CW engine sends your macros with the radio's internal keyer (CAT `KY`) — no
+WinKeyer, no second cable. Pick **Yaesu (rig keyer)** in Settings → CW keyer.
+
+- Works on the **FTDX101 / FT-991A / FT-710** family.
+- An **FTDX10 does not accept it** (`KY` is refused, `DAKY` doesn't help) —
+  OpsLog says so and points to the **serial DTR keyer** on the rig's second COM
+  port (the *Serial port* CW engine), which works. See [[Audio and Keyers]].
+- CW speed is one setting everywhere: the console slider, the CW panel and the
+  rig's front panel stay in agreement.
+
+## Notes
+
+- A Yaesu that is switched off is reported as such (opening the port is not
+  "connected").
+- If your interface goes into transmit the moment OpsLog connects, enable the
+  **lower DTR/RTS on connect** option — see [[CAT Control]].

wiki/_Sidebar.md

@@ -16,6 +16,8 @@
 - [[FlexRadio]]
 - [[Icom]]
 - [[Remote Icom over the Internet]]
+- [[Yaesu]]
+- [[Kenwood and Xiegu]]
 
 **Operating**
 - [[DX Cluster and Spots]]