chore: release v0.27.16

The eight-digit rigs, the typed watering hole and the RTTY sideband all
landed after the 0.27.15 release commit, so they were sitting in a block
that had already shipped. 0.27.15 says what was released again.

app.go

@@ -157,6 +157,7 @@ const (
 	// the rule since is that nothing a backend does may be steered by another
 	// backend's setting.
 	keyCATYaesuLowLines    = "cat.yaesu.low_dtr_rts"   // deassert DTR/RTS on connect
+	keyCATYaesuRTTYUSB     = "cat.yaesu.rtty_usb"      // set RTTY on USB rather than the older LSB
 	keyCATKenwoodLowLines  = "cat.kenwood.low_dtr_rts" // deassert DTR/RTS on connect
 	keyCATKenwoodDataMode  = "cat.kenwood.data_mode"   // data modes → "usb" | "data" (MD6) | "keep"
 	keyCATIcomPort         = "cat.icom.port"           // Icom USB CI-V serial port (e.g. COM5)
@@ -510,7 +511,11 @@ type CATSettings struct {
 	// Per-backend: deassert DTR and RTS after opening the CAT port, for
 	// interfaces that read either line as PTT. Off by default: lowering them
 	// stops some USB-serial interfaces transmitting at all.
-	YaesuLowLines   bool   `json:"yaesu_low_lines"`
+	YaesuLowLines bool `json:"yaesu_low_lines"`
+	// YaesuRTTYUSB: ADIF says "RTTY" and Yaesu has both sidebands, so the rig
+	// cannot be driven from the logged mode alone. Off = RTTY-L, the older
+	// convention.
+	YaesuRTTYUSB    bool   `json:"yaesu_rtty_usb"`
 	KenwoodLowLines bool   `json:"kenwood_low_lines"`
 	IcomPort        string `json:"icom_port"`      // Icom USB CI-V serial port (e.g. COM5)
 	IcomBaud        int    `json:"icom_baud"`      // Icom CI-V baud (default 115200)
@@ -8317,7 +8322,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if a.settings == nil {
 		return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDVKDax, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATKenwoodLink, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATKenwoodDataMode, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPttHotkeyEnabled, keyCATPttHotkey, keyCATPttHotkeyToggle, keyCATPollMs, keyCATDelayMs, keyCATOffsetOn, keyCATOffsetHz, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort, keyCATShareProto, keyCATShareTCIPort, keyCATDigiUSB)
+	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDVKDax, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATYaesuRTTYUSB, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATKenwoodLink, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATKenwoodDataMode, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPttHotkeyEnabled, keyCATPttHotkey, keyCATPttHotkeyToggle, keyCATPollMs, keyCATDelayMs, keyCATOffsetOn, keyCATOffsetHz, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort, keyCATShareProto, keyCATShareTCIPort, keyCATDigiUSB)
 	if err != nil {
 		return CATSettings{}, err
 	}
@@ -8343,6 +8348,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 		KenwoodLink:      kenwoodLinkOr(m[keyCATKenwoodLink], m[keyCATKenwoodHost]),
 		KenwoodBaud:      9600,
 		YaesuLowLines:    m[keyCATYaesuLowLines] == "1",
+		YaesuRTTYUSB:     m[keyCATYaesuRTTYUSB] == "1",
 		KenwoodLowLines:  m[keyCATKenwoodLowLines] == "1",
 		KenwoodDataMode:  m[keyCATKenwoodDataMode],
 		IcomPort:         m[keyCATIcomPort],
@@ -8556,6 +8562,7 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 		keyCATKenwoodLink:      kenwoodLinkOr(s.KenwoodLink, s.KenwoodHost),
 		keyCATKenwoodBaud:      strconv.Itoa(s.KenwoodBaud),
 		keyCATYaesuLowLines:    b01(s.YaesuLowLines),
+		keyCATYaesuRTTYUSB:     b01(s.YaesuRTTYUSB),
 		keyCATKenwoodLowLines:  b01(s.KenwoodLowLines),
 		keyCATKenwoodDataMode:  strings.ToLower(strings.TrimSpace(s.KenwoodDataMode)),
 		keyCATIcomPort:         strings.TrimSpace(s.IcomPort),
@@ -16283,6 +16290,7 @@ func (a *App) reloadCAT() {
 		// (a rig file that hides the VFO, a Freq property meaning A on one model
 		// and B on another); talking to the radio directly removes it.
 		yz := cat.NewYaesu(s.YaesuPort, s.YaesuBaud, s.DigitalDefault)
+		yz.SetRTTYUpper(s.YaesuRTTYUSB)
 		yz.SetLowerLines(s.YaesuLowLines)
 		a.cat.Start(yz)
 	case "kenwood", "elecraft":

changelog.json

@@ -1,4 +1,18 @@
 [
+  {
+    "version": "0.27.16",
+    "date": "",
+    "en": [
+      "[NEW] Typing a digital watering hole sets the mode with it. A spot click has always carried one; a frequency typed by hand carried none, so the rig stayed in SSB on 28.074 while the operator waited for decodes. Same table and same tolerance as a spot (±3 kHz of a known FT8/FT4/JS8 frequency), only towards the digital modes: tuning away from one leaves the mode alone, because there the frequency says nothing about what you mean to do.",
+      "Yaesu CAT now drives the older radios. The FTDX10, FT-991A, FT-891 and FT-710 write a frequency in nine digits; everything before them — FTDX3000, FTDX5000, FTDX1200, FT-2000, FT-950, FT-450 — writes eight and answers a nine-digit command with a rejection, which is what an FTDX3000 owner saw: every FA refused and a radio that would not follow. The width is taken from the rig’s own reply rather than from a table of models, so a set is in the format that radio speaks — including models this backend has never heard of.",
+      "Yaesu: RTTY can be set on USB (Settings → CAT). ADIF records only “RTTY” and the rig has both sidebands, so the log cannot answer for it — the older RTTY-L stays the default, and a station whose FSK controller wants the upper one says so once."
+    ],
+    "fr": [
+      "[NEW] Taper une fréquence d’appel numérique règle le mode avec elle. Un clic sur un spot en portait un depuis toujours ; une fréquence tapée à la main n’en portait aucun, si bien que le poste restait en SSB sur 28.074 pendant qu’on attendait les décodages. Même table et même tolérance qu’un spot (±3 kHz d’une fréquence FT8/FT4/JS8 connue), et seulement vers les modes numériques : en s’en éloignant le mode n’est pas touché, car là la fréquence ne dit rien de ce qu’on veut faire.",
+      "Le CAT Yaesu pilote désormais les postes plus anciens. FTDX10, FT-991A, FT-891 et FT-710 écrivent une fréquence sur neuf chiffres ; tout ce qui précède — FTDX3000, FTDX5000, FTDX1200, FT-2000, FT-950, FT-450 — l’écrit sur huit et rejette une commande à neuf chiffres. C’est ce que voyait un possesseur de FTDX3000 : chaque FA refusée et une radio qui ne suivait pas. Le format est pris dans la réponse du poste plutôt que dans une table de modèles : l’envoi part donc dans la langue de cette radio-là, y compris pour des modèles que ce backend ne connaît pas.",
+      "Yaesu : le RTTY peut être placé en USB (Réglages → CAT). L’ADIF n’enregistre que « RTTY » et le poste a les deux bandes latérales : le log ne peut pas répondre à sa place. Le RTTY-L ancien reste par défaut, et une station dont l’interface FSK veut la supérieure le dit une fois."
+    ]
+  },
   {
     "version": "0.27.15",
     "date": "",

frontend/src/App.tsx

@@ -5926,7 +5926,29 @@ export default function App() {
     const mhz = parseFloat(mhzStr);
     if (!Number.isFinite(mhz) || mhz < 0.1 || mhz > 3000) return;
     noteManualEdit();
-    SetCATFrequency(Math.round(mhz * 1_000_000)).catch(() => {});
+    const hz = Math.round(mhz * 1_000_000);
+    SetCATFrequency(hz).catch(() => {});
+    tuneModeForWateringHole(hz);
+  };
+
+  // 28.074 IS FT8, and typing it says so.
+  //
+  // A spot click has always carried a mode; a frequency typed by hand carried
+  // none, so the rig stayed in whatever it was — an FTDX3000 landing on 28.074
+  // in USB while the operator waited for decodes. Nobody tunes a watering hole
+  // to listen to it in SSB, and this is the same table and the same tolerance a
+  // spot click is judged with (±3 kHz of a known digital frequency).
+  //
+  // Only when it actually changes something, and only towards the digital
+  // modes: tuning away from 28.074 leaves the mode alone, because there the
+  // frequency says nothing about what the operator means to do.
+  const tuneModeForWateringHole = (hz: number) => {
+    const m = inferDigitalMode(hz);
+    if (!m || m === mode) return;
+    setMode(m);
+    applyModePreset(m);
+    if (catState.enabled && catState.connected && !locks.mode) SetCATMode(m).catch(() => {});
+    ConfigureDecoderMode(m).catch(() => {});
   };
   // Carry out what was typed in the call field. Bands go through the ordinary
   // band change, so the antennas, the power table and the outbound integrations
@@ -5944,6 +5966,7 @@ export default function App() {
     const b = bandForMHz(hz / 1_000_000);
     if (b) setBand(b);
     if (catState.enabled && catState.connected) SetCATFrequency(hz).catch(() => {});
+    tuneModeForWateringHole(hz);
     showToast((hz / 1_000_000).toFixed(3) + ' MHz');
   };
 

frontend/src/components/SettingsModal.tsx

@@ -1628,7 +1628,7 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
   const [icomCustom, setIcomCustom] = useState(false);
   const [catCfg, setCatCfg] = useState<CATSettings>({
     enabled: false, backend: 'omnirig', omnirig_rig: 1, omnirig_vfo: '', flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120, flex_dvk_dax: false,
-    yaesu_port: '', yaesu_baud: 38400, yaesu_low_lines: false, kenwood_low_lines: false, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', kenwood_link: 'usb', kenwood_data_mode: 'usb', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '',
+    yaesu_port: '', yaesu_baud: 38400, yaesu_low_lines: false, yaesu_rtty_usb: false, kenwood_low_lines: false, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', kenwood_link: 'usb', kenwood_data_mode: 'usb', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '',
     icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0, offset_on: false, offset_hz: 0,
     digital_default: 'FT8', share_enabled: false, share_port: 4532, share_proto: 'rigctl', share_tci_port: 40001,
@@ -3532,6 +3532,17 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
                 </label>
                 <span className="text-xs text-muted-foreground">{t('cat.lowerLinesHint')}</span>
               </div>
+              {/* ADIF records "RTTY" and nothing more, and the rig has two
+                  sidebands to put it on — so this is the operator's answer, not
+                  something the log can supply. */}
+              <div className="col-span-2 space-y-1">
+                <label className="flex items-center gap-2 text-xs cursor-pointer">
+                  <Checkbox checked={!!(catCfg as any).yaesu_rtty_usb}
+                    onCheckedChange={(c) => setCatCfg((s) => ({ ...s, yaesu_rtty_usb: !!c } as any))} />
+                  {t('cat.yaesuRttyUsb')}
+                </label>
+                <span className="text-xs text-muted-foreground">{t('cat.yaesuRttyUsbHint')}</span>
+              </div>
             </>
             )}
             {['icom', 'xiegu', 'kenwood', 'elecraft'].includes(catCfg.backend) && (

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.27.15';
+export const APP_VERSION = '0.27.16';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/models.ts

@@ -2379,6 +2379,7 @@ export namespace main {
 	    kenwood_baud: number;
 	    kenwood_data_mode: string;
 	    yaesu_low_lines: boolean;
+	    yaesu_rtty_usb: boolean;
 	    kenwood_low_lines: boolean;
 	    icom_port: string;
 	    icom_baud: number;
@@ -2432,6 +2433,7 @@ export namespace main {
 	        this.kenwood_baud = source["kenwood_baud"];
 	        this.kenwood_data_mode = source["kenwood_data_mode"];
 	        this.yaesu_low_lines = source["yaesu_low_lines"];
+	        this.yaesu_rtty_usb = source["yaesu_rtty_usb"];
 	        this.kenwood_low_lines = source["kenwood_low_lines"];
 	        this.icom_port = source["icom_port"];
 	        this.icom_baud = source["icom_baud"];

internal/cat/yaesu.go

@@ -59,6 +59,13 @@ var yaesuModels = map[string]string{
 	"0650": "FT-891",
 	"0670": "FT-DX3000",
 	"0460": "FT-450D",
+	// The eight-digit family. Named for the console; the frequency format is
+	// learned from the rig either way (see learnFreqWidth).
+	"0251": "FT-2000",
+	"0310": "FT-950",
+	"0583": "FTDX1200",
+	"0462": "FTDX3000",
+	"0101": "FTDX5000",
 }
 
 // yaesuModeToADIF maps the MD digit to an ADIF mode. The DATA and RTTY variants
@@ -100,6 +107,11 @@ type Yaesu struct {
 	// rxVFOCmd is "FR" when the rig reports its receive VFO that way, else empty
 	// and VS is used — see ReadState.
 	rxVFOCmd string
+	// freqDigits is how many digits this rig writes a frequency in, LEARNED from
+	// its own replies. See learnFreqWidth.
+	freqDigits int
+	// rttyUpper picks RTTY-U over RTTY-L — see SetRTTYUpper.
+	rttyUpper bool
 
 	curFreq   int64
 	curRXFreq int64
@@ -130,6 +142,18 @@ func NewYaesu(portName string, baud int, digital string) *Yaesu {
 	return &Yaesu{portName: strings.TrimSpace(portName), baud: baud, digital: digital, curVFO: "A"}
 }
 
+// SetRTTYUpper chooses which sideband RTTY is set on.
+//
+// Yaesu has both — MD06 is RTTY-L, MD09 is RTTY-U — and ADIF has neither: it
+// says "RTTY" and stops there, so the rig cannot be driven from the logged mode
+// alone. LSB is the older convention and stays the default; an operator whose
+// FSK controller or decoder wants the other one says so once here.
+func (y *Yaesu) SetRTTYUpper(v bool) {
+	y.mu.Lock()
+	defer y.mu.Unlock()
+	y.rttyUpper = v
+}
+
 // SetLowerLines chooses whether DTR and RTS are deasserted on connect. Set
 // before Connect.
 func (y *Yaesu) SetLowerLines(v bool) {
@@ -275,6 +299,7 @@ func (y *Yaesu) ReadState() (RigState, error) {
 	if err != nil {
 		return RigState{}, err // the rig stopped answering — let the Manager reconnect
 	}
+	y.learnFreqWidth(faRaw, "FA")
 	freqA, ok := parseYaesuFreq(faRaw, "FA")
 	if !ok {
 		return RigState{}, fmt.Errorf("yaesu: unparsable FA reply %q", faRaw)
@@ -355,7 +380,7 @@ func (y *Yaesu) SetFrequency(hz int64) error {
 	if y.curVFO == "B" {
 		cmd = "FB"
 	}
-	return y.write(fmt.Sprintf("%s%09d;", cmd, hz))
+	return y.write(fmt.Sprintf("%s%0*d;", cmd, y.freqWidth(), hz))
 }
 
 func (y *Yaesu) SetMode(mode string) error {
@@ -364,7 +389,7 @@ func (y *Yaesu) SetMode(mode string) error {
 	if y.port == nil {
 		return fmt.Errorf("yaesu: not connected")
 	}
-	d := yaesuModeDigit(mode, y.curFreq)
+	d := yaesuModeDigit(mode, y.curFreq, y.rttyUpper)
 	if d == 0 {
 		return fmt.Errorf("yaesu: no CAT mode for %q", mode)
 	}
@@ -481,7 +506,53 @@ func cmdPrefix(cmd string) string {
 	return c
 }
 
-// parseYaesuFreq reads "FA014074000;" into Hz.
+// EIGHT DIGITS OR NINE — the rig says which, and it is not a matter of taste.
+//
+// The FTDX10, FT-991A, FT-891 and FT-710 write a frequency in nine digits;
+// everything before them — FTDX3000, FTDX5000, FTDX1200, FT-2000, FT-950,
+// FT-450 — writes eight, and answers a nine-digit SET with "?;". An operator
+// with an FTDX3000 saw exactly that: every FA command rejected, a radio that
+// would not follow, and nothing to say why.
+//
+// The width is LEARNED rather than tabulated: the rig announces it in every
+// reply to "FA;", so the answer comes from the radio in front of the operator
+// instead of from a list of models that will always be one release behind. Nine
+// until the first reply lands, which is what the modern rigs use and what this
+// backend was written against.
+const yaesuFreqDigitsDefault = 9
+
+func (y *Yaesu) freqWidth() int {
+	if y.freqDigits >= 8 && y.freqDigits <= 11 {
+		return y.freqDigits
+	}
+	return yaesuFreqDigitsDefault
+}
+
+// learnFreqWidth takes the width from a frequency reply. Only a reply that
+// parses as a frequency teaches anything — a "?;" or a stray frame says nothing
+// about the format, and a width learned from one would be worse than the
+// default.
+func (y *Yaesu) learnFreqWidth(reply, prefix string) {
+	r := strings.TrimSpace(reply)
+	if !strings.HasPrefix(r, prefix) {
+		return
+	}
+	digits := strings.TrimSuffix(strings.TrimPrefix(r, prefix), ";")
+	if len(digits) < 8 || len(digits) > 11 {
+		return
+	}
+	for _, c := range digits {
+		if c < '0' || c > '9' {
+			return
+		}
+	}
+	if y.freqDigits != len(digits) {
+		debugLog.Printf("yaesu: this rig writes frequencies in %d digits — commands will match", len(digits))
+		y.freqDigits = len(digits)
+	}
+}
+
+// parseYaesuFreq reads "FA014074000;" (or "FA14074000;") into Hz.
 func parseYaesuFreq(reply, prefix string) (int64, bool) {
 	r := strings.TrimSpace(reply)
 	if !strings.HasPrefix(r, prefix) {
@@ -551,7 +622,7 @@ func resolveYaesuVFOs(freqA, freqB int64, vfo string, split bool) (tx, rx int64,
 // yaesuModeDigit maps an ADIF mode to the MD digit. SSB has no single digit —
 // the sideband follows the worldwide convention (LSB below 10 MHz, USB above),
 // which is why the current frequency is part of the decision.
-func yaesuModeDigit(mode string, freqHz int64) byte {
+func yaesuModeDigit(mode string, freqHz int64, rttyUpper bool) byte {
 	switch strings.ToUpper(strings.TrimSpace(mode)) {
 	case "SSB":
 		if freqHz > 0 && freqHz < 10_000_000 {
@@ -569,7 +640,10 @@ func yaesuModeDigit(mode string, freqHz int64) byte {
 	case "AM":
 		return '5'
 	case "RTTY":
-		return '6'
+		if rttyUpper {
+			return '9' // RTTY-U
+		}
+		return '6' // RTTY-L, the older convention
 	case "":
 		return 0
 	default:

internal/cat/yaesu_freqwidth_test.go

@@ -0,0 +1,38 @@
+package cat
+
+import "testing"
+
+// The FTDX10 family writes a frequency in nine digits; everything before it —
+// FTDX3000, FTDX5000, FTDX1200, FT-2000, FT-950, FT-450 — writes eight and
+// answers a nine-digit SET with "?;". Reported from an FTDX3000: every FA
+// command rejected, a radio that would not follow.
+//
+// The width is taken from the rig's own reply, so a model this backend has
+// never heard of is right on the first read.
+func TestYaesuFrequencyWidthIsLearnedFromTheRig(t *testing.T) {
+	y := &Yaesu{}
+	if got := y.freqWidth(); got != 9 {
+		t.Errorf("before any reply the width is %d, want the modern 9", got)
+	}
+
+	y.learnFreqWidth("FA14074000;", "FA") // an FTDX3000
+	if got := y.freqWidth(); got != 8 {
+		t.Errorf("width %d after an eight-digit reply, want 8", got)
+	}
+
+	y.learnFreqWidth("FA014074000;", "FA") // and an FTDX10 on the next session
+	if got := y.freqWidth(); got != 9 {
+		t.Errorf("width %d after a nine-digit reply, want 9", got)
+	}
+
+	// Nothing that is not a frequency teaches anything: a rejection, a stray
+	// frame or a reply from another command would otherwise set the format for
+	// every command that follows.
+	for _, junk := range []string{"?;", "FA;", "FB014074000;", "FA1407400X;", "FA1234567;", "FA123456789012;"} {
+		before := y.freqWidth()
+		y.learnFreqWidth(junk, "FA")
+		if after := y.freqWidth(); after != before {
+			t.Errorf("%q changed the width from %d to %d", junk, before, after)
+		}
+	}
+}

internal/cat/yaesu_test.go

@@ -123,7 +123,7 @@ func TestYaesuModeDigit(t *testing.T) {
 		{"", 14074000, 0},      // nothing to set
 	}
 	for _, c := range cases {
-		if got := yaesuModeDigit(c.mode, c.hz); got != c.want {
+		if got := yaesuModeDigit(c.mode, c.hz, false); got != c.want {
 			t.Errorf("yaesuModeDigit(%q, %d) = %q, want %q", c.mode, c.hz, got, c.want)
 		}
 	}
@@ -406,3 +406,22 @@ func TestYaesuAntennaCommand(t *testing.T) {
 		}
 	}
 }
+
+// ADIF says "RTTY" and stops there, but Yaesu has both sidebands and the rig
+// has to be told one. LSB is the older convention and the default; the other is
+// a station's own choice, made once.
+func TestYaesuRTTYSideband(t *testing.T) {
+	if got := yaesuModeDigit("RTTY", 14_080_000, false); got != '6' {
+		t.Errorf("RTTY = %q, want RTTY-L", got)
+	}
+	if got := yaesuModeDigit("RTTY", 14_080_000, true); got != '9' {
+		t.Errorf("RTTY (upper) = %q, want RTTY-U", got)
+	}
+	// The switch is about RTTY and nothing else.
+	if got := yaesuModeDigit("FT8", 28_074_000, true); got != 'C' {
+		t.Errorf("FT8 = %q, want DATA-U", got)
+	}
+	if got := yaesuModeDigit("CW", 14_030_000, true); got != '3' {
+		t.Errorf("CW = %q, want CW-U", got)
+	}
+}

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.27.15"
+	appVersion = "0.27.16"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.