chore: release v0.27.8

From an IC-7300 report, four faults and one addition.

USB and LSB could not be commanded at all: modeCode knew 'SSB' — which
resolves the sideband from the band — and answered 'unsupported mode' to
the sideband names themselves. So an operator wanting USB on 40 m had no
way to say it, from the console or from anywhere else. They are separate
buttons now, and a rig reporting the folded ADIF 'SSB' still lights the
side its frequency implies.

The console offered controls the radio does not have: ANT1/ANT2 on a rig
with one socket, and a PSK button every non-7610-class Icom NAKs. Both
now follow the model, as the band buttons and attenuator steps already
did. Mic gain stops being phone-only — on USB-D it still sets what the
radio transmits at, so an operator who lives in FT8 had none.

CI-V address 0x00 was refused by a 'n > 0' test and silently replaced by
the IC-7610 default; an EMPTY setting is what means unconfigured, so the
parse error decides now, not the value. Plus the 60 m band button that
was missing.

app.go

@@ -117,6 +117,9 @@ const (
 	keyCATOmniRigNum = "cat.omnirig.rig" // 1 or 2
 	// Which VFO to believe when OmniRig names one. "" = trust the rig file.
 	keyCATOmniRigVFO = "cat.omnirig.vfo" // "" | "A" | "B"
+	// Put the RADIO in USB for a digital mode instead of asking for the mode by
+	// name. Every backend, because the reason is the radio, not the link.
+	keyCATDigiUSB         = "cat.digi_usb"
 	keyCATFlexHost        = "cat.flex.host"         // FlexRadio IP (native backend)
 	keyCATFlexPort        = "cat.flex.port"         // FlexRadio TCP port (default 4992)
 	keyCATFlexSpots       = "cat.flex.spots"        // push cluster spots to the panadapter
@@ -474,6 +477,9 @@ type CATSettings struct {
 	// the .ini: an IC-7610 file was seen declaring VFO B permanently while the
 	// operator worked on the main VFO, so OpsLog wrote to A and read B.
 	OmniRigVFO string `json:"omnirig_vfo"` // "" | "A" | "B"
+	// DigiAsUSB puts the radio in USB when a digital mode is selected, rather
+	// than naming the mode. What the QSO is LOGGED as never changes.
+	DigiAsUSB       bool   `json:"digi_as_usb"`
 	FlexHost        string `json:"flex_host"`         // FlexRadio IP (native backend)
 	FlexPort        int    `json:"flex_port"`         // FlexRadio TCP port (default 4992)
 	FlexSpots       bool   `json:"flex_spots"`        // push cluster spots to the panadapter
@@ -2948,6 +2954,28 @@ func (a *App) reloadLookupProviders() {
 
 // --- QSO bindings ---
 
+// fillRXDefaults stamps the receive side when the contact was not split.
+//
+// The ADIF importer has always done this — an absent BAND_RX/FREQ_RX means RX
+// equals TX — but the LOGGING paths did not, so what a QSO carried depended on
+// which door it came through. It shows up outside OpsLog: the record forwarded
+// to another logger over UDP is written from the QSO as logged, and a receiver
+// reading BAND_RX (Log4OM does) found nothing there for contacts logged by a
+// path that left it blank.
+//
+// Applied at AddQSO, the one funnel every path goes through — manual entry, the
+// WSJT-X/UDP log, CW, contest, net control, the ADIF monitor — so the database,
+// the export and the forwarded copy all say the same thing.
+func fillRXDefaults(q *qso.QSO) {
+	if strings.TrimSpace(q.BandRX) == "" {
+		q.BandRX = q.Band
+	}
+	if q.FreqRXHz == nil && q.FreqHz != nil {
+		v := *q.FreqHz
+		q.FreqRXHz = &v
+	}
+}
+
 func (a *App) AddQSO(q qso.QSO) (id int64, err error) {
 	if a.qso == nil {
 		return 0, fmt.Errorf("db not initialized")
@@ -2963,6 +2991,7 @@ func (a *App) AddQSO(q qso.QSO) (id int64, err error) {
 		}
 	}()
 	a.applyStationDefaults(&q, true)
+	fillRXDefaults(&q)
 	fillDistance(&q)
 	a.applyDXCCNumber(&q)
 	a.applyULSCounty(&q)               // fill blank US county/grid from the offline ULS store
@@ -8212,7 +8241,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if a.settings == nil {
 		return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDVKDax, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATKenwoodLink, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATKenwoodDataMode, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPttHotkeyEnabled, keyCATPttHotkey, keyCATPttHotkeyToggle, keyCATPollMs, keyCATDelayMs, keyCATOffsetOn, keyCATOffsetHz, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort, keyCATShareProto, keyCATShareTCIPort)
+	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDVKDax, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATKenwoodLink, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATKenwoodDataMode, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPttHotkeyEnabled, keyCATPttHotkey, keyCATPttHotkeyToggle, keyCATPollMs, keyCATDelayMs, keyCATOffsetOn, keyCATOffsetHz, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort, keyCATShareProto, keyCATShareTCIPort, keyCATDigiUSB)
 	if err != nil {
 		return CATSettings{}, err
 	}
@@ -8301,9 +8330,16 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if n, _ := strconv.Atoi(m[keyCATIcomBaud]); n > 0 {
 		out.IcomBaud = n
 	}
-	if n, _ := strconv.Atoi(m[keyCATIcomAddr]); n > 0 && n <= 0xFF {
+	// 0x00 is a real CI-V address an operator may need (a bare interface, a rig
+	// left at its factory broadcast address), and "> 0" silently sent them back
+	// to the IC-7610 default with no way to say what they meant. An EMPTY
+	// setting is what means "never configured" — so the error is what decides,
+	// not the value.
+	if v := strings.TrimSpace(m[keyCATIcomAddr]); v != "" {
+		if n, err := strconv.Atoi(v); err == nil && n >= 0 && n <= 0xFF {
 			out.IcomAddr = n
 		}
+	}
 	if out.Backend == "" {
 		out.Backend = "omnirig"
 	}
@@ -8313,6 +8349,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if v := strings.ToUpper(strings.TrimSpace(m[keyCATOmniRigVFO])); v == "A" || v == "B" {
 		out.OmniRigVFO = v
 	}
+	out.DigiAsUSB = m[keyCATDigiUSB] == "1"
 	if n, _ := strconv.Atoi(m[keyCATOmniRigNum]); n == 1 || n == 2 {
 		out.OmniRigNum = n
 	}
@@ -8421,6 +8458,7 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 		keyCATBackend:          s.Backend,
 		keyCATOmniRigNum:       strconv.Itoa(s.OmniRigNum),
 		keyCATOmniRigVFO:       strings.ToUpper(strings.TrimSpace(s.OmniRigVFO)),
+		keyCATDigiUSB:          boolStr(s.DigiAsUSB),
 		keyCATFlexHost:         strings.TrimSpace(s.FlexHost),
 		keyCATFlexPort:         strconv.Itoa(s.FlexPort),
 		keyCATFlexSpots:        flexSpots,
@@ -9122,6 +9160,7 @@ func (a *App) clusterEventWorker() {
 					FreqHz:          s.FreqHz,
 					Callsign:        s.DXCall,
 					Mode:            mode,
+					Priority:        spotPriority(status),
 					Comment:         spotComment(s.Comment, s.Spotter, s.Country, status),
 					Color:           col.Text,
 					BackgroundColor: col.Bg,
@@ -11460,6 +11499,135 @@ func (a *App) TestClublogUpload() (string, error) {
 	return extsvc.TestClublog(a.ctx, a.loadExternalServices().Clublog)
 }
 
+// UploadFullLogHamQTH replaces the HamQTH log with this one, in one request.
+//
+// The per-QSO API is the only correct way to send a SELECTION, and at the pace
+// it has to be driven a full backlog costs the better part of an hour. This is
+// the other endpoint HamQTH offers: a whole log as one file, which is why it
+// only ever runs on an explicit "replace my HamQTH log" — the site keeps
+// nothing that is not in the file.
+//
+// Scoped to the callsign this profile uploads as: a database holding two
+// operators' contacts must not push one operator's QSOs into the other's log.
+func (a *App) UploadFullLogHamQTH() error {
+	if a.qso == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	cfg := a.loadExternalServices().HamQTH
+	if strings.TrimSpace(cfg.Username) == "" || cfg.Password == "" {
+		return fmt.Errorf("set the HamQTH username and password first")
+	}
+	go a.runFullLogHamQTH(cfg)
+	return nil
+}
+
+func (a *App) runFullLogHamQTH(cfg extsvc.ServiceConfig) {
+	emit := func(line string) {
+		if a.ctx != nil {
+			wruntime.EventsEmit(a.ctx, "qslmgr:log", line)
+		}
+	}
+	done := func(n int) {
+		if a.ctx != nil {
+			wruntime.EventsEmit(a.ctx, "qslmgr:done", map[string]any{"uploaded": n, "total": n})
+		}
+	}
+	ctx := a.ctx
+	owner := a.uploadOwnerCall(extsvc.ServiceHamQTH)
+
+	// Written to a temp file rather than a buffer so the ordinary, tested
+	// exporter does the work — the same one the Export menu uses.
+	tmp, err := os.CreateTemp("", "opslog-hamqth-*.adi")
+	if err != nil {
+		emit("Export failed: " + err.Error())
+		done(0)
+		return
+	}
+	path := tmp.Name()
+	_ = tmp.Close()
+	defer os.Remove(path)
+
+	if owner != "" {
+		emit("Station callsign: " + owner + " — QSOs logged under another of your callsigns are NOT included.")
+	}
+	emit("Exporting the log…")
+	var res adif.ExportResult
+	if owner != "" {
+		// station_callsign empty OR the owner call — an old QSO logged before
+		// the field existed belongs to whoever is uploading now.
+		f := qso.QueryFilter{Match: "OR", Conditions: []qso.Condition{
+			{Field: "station_callsign", Op: "eq", Value: ""},
+			{Field: "station_callsign", Op: "eq", Value: owner},
+		}}
+		res, err = a.ExportADIFFiltered(path, false, f, nil)
+	} else {
+		res, err = a.ExportADIF(path, false, nil)
+	}
+	if err != nil {
+		emit("Export failed: " + err.Error())
+		done(0)
+		return
+	}
+	data, rerr := os.ReadFile(path)
+	if rerr != nil {
+		emit("Export failed: " + rerr.Error())
+		done(0)
+		return
+	}
+	total, _ := a.qso.Count(ctx)
+	if total > 0 && int64(res.Count) != total {
+		emit(fmt.Sprintf("%d of %d QSOs in this logbook match %s and will be sent.", res.Count, total, owner))
+	}
+	emit(fmt.Sprintf("Exported %d QSO(s), %d KB of ADIF.", res.Count, res.SizeKB))
+	emit(fmt.Sprintf("Uploading to HamQTH — this REPLACES the log there…"))
+
+	up, uerr := extsvc.UploadHamQTHFullLog(ctx, nil, cfg, string(data))
+	if uerr != nil || !up.OK {
+		msg := up.Message
+		if uerr != nil {
+			msg = uerr.Error()
+		}
+		emit("Upload failed: " + msg)
+		applog.Printf("hamqth: full-log upload failed: %s", msg)
+		done(0)
+		return
+	}
+	emit("HamQTH replied: " + up.Message)
+	// Said plainly, because the numbers will not agree for a while and an
+	// operator comparing them straight away has every reason to think the
+	// upload failed: HamQTH ACCEPTS the file here and imports it later, at its
+	// own pace. What it makes of each record is reported by E-MAIL, never in
+	// this reply — so a count that stops short means the site rejected records,
+	// and the mail says which.
+	emit("Accepted — HamQTH imports the file in the BACKGROUND, so its QSO count will lag for a while.")
+	emit("If the count stops short, HamQTH e-mails the ADIF errors to your account address — this reply cannot carry them.")
+
+	// Everything is on HamQTH now, so nothing is still waiting to be sent. Only
+	// the rows that are not already stamped need writing.
+	pending, lerr := a.qso.ListMissingExtra(ctx, hamqthSentKey)
+	if lerr != nil {
+		applog.Printf("hamqth: marking sent: %v", lerr)
+	} else if len(pending) > 0 {
+		ids := make([]int64, 0, len(pending))
+		for _, q := range pending {
+			ids = append(ids, q.ID)
+		}
+		date := time.Now().UTC().Format("20060102")
+		if _, e := a.qso.BulkSetExtra(ctx, ids, hamqthSentKey, "Y"); e != nil {
+			applog.Printf("hamqth: marking sent: %v", e)
+		}
+		if _, e := a.qso.BulkSetExtra(ctx, ids, hamqthSentDateKey, date); e != nil {
+			applog.Printf("hamqth: marking sent date: %v", e)
+		}
+		emit(fmt.Sprintf("Marked %d QSO(s) as sent to HamQTH.", len(ids)))
+	}
+	applog.Printf("hamqth: full-log upload OK (%d QSOs)", res.Count)
+	if a.ctx != nil {
+		wruntime.EventsEmit(a.ctx, "toast", fmt.Sprintf("HamQTH: %d QSO uploaded", res.Count))
+	}
+	done(res.Count)
+}
+
 // TestHamQTHUpload checks the HamQTH credentials against the callbook login —
 // authenticated, and unable to touch the log.
 func (a *App) TestHamQTHUpload() (string, error) {
@@ -14238,6 +14406,7 @@ func (a *App) consumeUDPEvents() {
 					BackgroundColor: bgCol,
 					Comment:         spotComment(fmt.Sprintf("%s %+ddB", ev.Mode, ev.DecodeSNR), "", a.countryFor(ev.DecodeCall), status),
 					LifetimeSec:     secs,
+					Priority:        spotPriority(status),
 				}:
 				default:
 					// Radio not keeping up: skip the spot rather than stall the
@@ -14676,6 +14845,7 @@ func (a *App) SetCATMode(mode string) error {
 	if a.cat == nil {
 		return fmt.Errorf("cat not initialized")
 	}
+	mode = a.catModeForRadio(mode)
 	err := a.cat.SetMode(mode)
 	if err != nil {
 		applog.Printf("cat: SetMode(%q) dispatch error: %v", mode, err)
@@ -14683,6 +14853,31 @@ func (a *App) SetCATMode(mode string) error {
 	return err
 }
 
+// catModeForRadio translates a LOGGED mode into what the RADIO should be put
+// in, for operators who have asked for USB on digital.
+//
+// The soundcard modes — FT8, FT4, PSK, JS8, Q65… — are all USB with audio in
+// the microphone path, and that is what most rigs need. Asking for the mode by
+// name is the better answer on a modern transceiver with a DATA/PKT position,
+// and the wrong one on an older set where the CAT layer resolves "digital" to
+// RTTY/FSK: the operator lands in FSK, which keys the radio from a mark/space
+// generator and cannot pass FT8 at all. OmniRig does exactly this, per rig
+// file, and there is no arguing with it from here — so the option sends what
+// the radio can actually do.
+//
+// This is the RADIO's mode only. The QSO is still logged as FT8: the mode is
+// what the contact WAS, not what the front panel says.
+func (a *App) catModeForRadio(mode string) string {
+	if strings.TrimSpace(mode) == "" || a.settingOr(keyCATDigiUSB, "") != "1" {
+		return mode
+	}
+	if qso.ModeClass(mode) != "DIG" {
+		return mode
+	}
+	applog.Printf("cat: %s → USB (digital modes set the radio to USB)", strings.ToUpper(mode))
+	return "USB"
+}
+
 // ── FlexRadio control tab (Phase 1: SmartSDR-style transmit controls) ──
 // These are no-ops / errors unless the active CAT backend is a FlexRadio.
 
@@ -20857,6 +21052,12 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 		if !worked {
 			out[i].Status = "new"
 			if _, ever := entities[dxccNum]; ever {
+				// Worked, never confirmed — and if it was THIS station on THIS
+				// slot, the need is not its to answer (see the rule below).
+				if out[i].WorkedSlot {
+					out[i].Status = "worked"
+					continue
+				}
 				out[i].UnconfStatus = true
 			}
 			continue
@@ -20893,6 +21094,21 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 				}
 			}
 		}
+		// THIS station, already in the log on THIS slot, has nothing left to
+		// give. Working it a second time on the same band and mode cannot make
+		// the entity count: the QSO is already there and only the QSL is
+		// missing, and a duplicate does not produce one. So the need is real —
+		// it is simply not this station's to answer, and shouting NEW DXCC over
+		// a callsign worked an hour ago is how an operator learns to distrust
+		// the colour. Another station in the entity still carries the badge.
+		//
+		// Only for a need that IS a missing confirmation: a genuinely new
+		// entity cannot co-exist with a worked callsign, so nothing real is
+		// suppressed here.
+		if out[i].UnconfStatus && out[i].WorkedSlot {
+			out[i].Status = "worked"
+			out[i].UnconfStatus = false
+		}
 	}
 	return out
 }

changelog.json

@@ -1,4 +1,60 @@
 [
+  {
+    "version": "0.27.8",
+    "date": "",
+    "en": [
+      "The band matrix’s DIG row is now a rotation: click it and it answers for FT8, then FT4, then each digital mode your mode list holds — in YOUR order — then back to DIG. One row per digital mode would be the honest layout and there is no height for it beside the other widgets, so the row keeps its place and changes what it says. The label column is sized once for the longest mode it can show, so the matrix never shifts as the rotation comes round to RTTY.",
+      "Icom console: LSB and USB are separate buttons and can finally be commanded by name — the single SSB button resolved the sideband from the band, so there was no way to ask an IC-7300 for USB on 40 m. A rig reporting the folded “SSB” still lights the side its frequency implies.",
+      "Icom console: a 60 m band button, and the antenna and PSK controls only appear on radios that have them. An IC-7300 has one antenna socket and no native PSK mode, so ANT1/ANT2 could only ever disagree with its front panel and the PSK button was dead furniture.",
+      "Icom console: the mic gain is no longer hidden outside phone modes — on USB-D it still sets what the radio transmits at, and an operator who lives in FT8 had none at all.",
+      "Icom CI-V: address 0x00 can be chosen. It was silently refused and replaced by the IC-7610 default, with no way to say what was meant."
+    ],
+    "fr": [
+      "La ligne DIG de la matrice devient une rotation : un clic et elle répond pour FT8, puis FT4, puis chaque mode numérique de votre liste — dans VOTRE ordre — puis retour à DIG. Une ligne par mode numérique serait la mise en page honnête et la hauteur manque à côté des autres widgets : la ligne garde donc sa place et change ce qu’elle dit. La colonne des libellés est dimensionnée une fois pour le plus long mode qu’elle peut afficher : la matrice ne bouge donc plus quand la rotation arrive sur RTTY.",
+      "Console Icom : LSB et USB sont deux boutons distincts et peuvent enfin être demandés par leur nom — le bouton SSB unique déduisait la bande latérale de la fréquence, impossible donc de demander l’USB à un IC-7300 sur 40 m. Une radio qui annonce le « SSB » générique allume malgré tout le côté que sa fréquence implique.",
+      "Console Icom : un bouton de bande 60 m, et les commandes antenne et PSK n’apparaissent que sur les radios qui en disposent. Un IC-7300 n’a qu’une prise d’antenne et pas de mode PSK natif : ANT1/ANT2 ne pouvait que contredire sa face avant, et le bouton PSK était un meuble mort.",
+      "Console Icom : le gain micro n’est plus masqué hors des modes phonie — en USB-D il règle toujours le niveau d’émission, et un opérateur qui vit en FT8 n’en avait aucun.",
+      "CI-V Icom : l’adresse 0x00 peut être choisie. Elle était refusée en silence et remplacée par le défaut IC-7610, sans moyen de dire ce que l’on voulait."
+    ]
+  },
+  {
+    "version": "0.27.7",
+    "date": "",
+    "en": [
+      "DX Cluster: a disconnected server keeps its pill, so it can be reconnected — disconnecting one used to make it vanish along with the only way back.",
+      "HamQTH: an “Upload the whole log” button in the QSL Manager — one file instead of one request per QSO, so a first sync takes seconds rather than the better part of an hour. It REPLACES the log held on HamQTH (the site has no partial upload), so it asks first, is scoped to the callsign this profile uploads as, and compresses a large log to stay under the 20 MB limit.",
+      "Outbound ADIF (forwarding a logged QSO to another logger such as Log4OM): the receive side is filled in when the contact was not split, so BAND_RX and FREQ_RX are present. The importer already did this; the logging paths did not, so what a QSO carried depended on which door it came in through.",
+      "HamQTH joins the places the other services already were: two Recent-QSOs columns (sent status and date), the QSO filter, and bulk edit — the last one so a log uploaded to HamQTH by hand can be marked as sent instead of being offered for upload all over again.",
+      "HamQTH whole-log upload: it reports itself in the console like every other action — the callsign it is scoped to, how many of the logbook’s QSOs that leaves, the file size, and HamQTH’s own reply — and says plainly that HamQTH imports the file in the background and e-mails any ADIF errors, so a site count that lags or stops short is explained rather than mysterious.",
+      "QSO editor: correcting a frequency now moves its band with it, TX and RX — a QSO fixed to 7.1 MHz no longer stays filed on 20m. The band is only touched when the frequency lands in a known allocation, so a half-typed number never blanks it.",
+      "CAT: an option to put the radio in USB for digital modes (Settings → CAT), for every backend. Clicking an FT8 spot on a rig whose CAT layer resolves “digital” to RTTY/FSK — OmniRig does, per rig file — landed the operator in FSK, which cannot pass FT8 at all. The QSO is still logged as FT8: only the radio changes.",
+      "Fixed: a “worked but not confirmed” badge turned solid again after the next QSO, so an entity worked on a band still read NEW BAND as if it had never been worked there. Four hand-written copies of the same status mapping had drifted apart — the two that re-fetch dropped the unconfirmed flags, and none of them ever carried the grid one. There is one mapping now.",
+      "The Chase switches (POTA, US counties, prefixes, grids) now hold in FT decodes and in Chase new, not only in the DX Cluster — they say what you hunt, not which panel is open. Unchecked, their badges and filter chips disappear from all three and only the entity verdicts remain: NEW DXCC, band, mode, slot.",
+      "New DXHunter page in Preferences: every Chase setting moves there from the DX Cluster page — the hunt, its confirmation sources, and the POTA / SOTA / US counties / prefixes / grids switches. They govern three screens now, so they no longer live under the name of one of them; more of DXHunter’s ideas will land beside them.",
+      "Chase US states joins the other switches: unchecked, the NEW STATE badge and its filter chip go quiet everywhere.",
+      "FT Map: zooming no longer leaves a dead strip along the bottom. Leaflet measures its container once, when the map is created — which here is the instant the tab is selected, before the layout has settled — and it is now told whenever that box changes size.",
+      "FT decodes: the continent filter shows all seven, always, instead of only those currently on the feed — the row no longer reshuffles under the pointer when the first Asian station decodes, and it says what the filter can do before anything has been heard.",
+      "Panadapter spots now carry SmartSDR’s priority: an entity never worked comes first, then the band / mode / slot needs, then POTA, SOTA, county and prefix, and everything else last. The radio stacks spots that sit close in frequency behind a “+” and draws only one — it picks by priority, so a new DXCC was disappearing behind stations already in the log simply because OpsLog never said which was worth the space.",
+      "A station already worked on the SAME band and mode no longer advertises a need. Working it a second time cannot turn a missing QSL into a confirmation, so the badge goes quiet on that callsign — and stays on every other station of the entity, which is where the need can actually be answered."
+    ],
+    "fr": [
+      "DX Cluster : un serveur déconnecté garde sa pastille et peut donc être reconnecté — le déconnecter le faisait disparaître avec le seul moyen d’y revenir.",
+      "HamQTH : un bouton « Envoyer tout le log » dans le QSL Manager — un seul fichier au lieu d’une requête par QSO, une première synchro passe de près d’une heure à quelques secondes. Il REMPLACE le log stocké sur HamQTH (le site n’a pas d’envoi partiel) : il demande donc confirmation, se limite à l’indicatif du profil et compresse un gros log pour rester sous la limite de 20 Mo.",
+      "ADIF sortant (transfert d’un QSO vers un autre log, Log4OM par exemple) : le côté réception est renseigné quand le contact n’était pas en split, donc BAND_RX et FREQ_RX sont présents. L’import le faisait déjà, pas les chemins de log — ce qu’un QSO transportait dépendait donc de la porte par laquelle il était entré.",
+      "HamQTH rejoint les endroits où les autres services étaient déjà : deux colonnes dans les QSO récents (statut et date d’envoi), le filtre de QSO et l’édition groupée — cette dernière pour qu’un log envoyé à la main sur HamQTH puisse être marqué comme envoyé au lieu d’être reproposé à l’envoi.",
+      "Envoi du log complet HamQTH : il rend compte dans la console comme toutes les autres actions — l’indicatif retenu, combien de QSO du journal cela représente, la taille du fichier et la réponse de HamQTH — et indique clairement que HamQTH importe le fichier en arrière-plan et envoie les erreurs ADIF par e-mail : un compteur en retard ou incomplet sur le site est ainsi expliqué au lieu d’être mystérieux.",
+      "Éditeur de QSO : corriger une fréquence déplace désormais sa bande avec elle, TX comme RX — un QSO corrigé à 7,1 MHz ne reste plus classé en 20m. La bande n’est touchée que si la fréquence tombe dans une allocation connue : un nombre à moitié tapé ne l’efface jamais.",
+      "CAT : une option pour mettre la radio en USB sur les modes numériques (Réglages → CAT), pour tous les backends. Cliquer un spot FT8 sur un poste dont la couche CAT traduit « numérique » par RTTY/FSK — c’est le cas d’OmniRig, selon le fichier radio — faisait basculer l’opérateur en FSK, incapable de passer du FT8. Le QSO reste enregistré en FT8 : seule la radio change.",
+      "Corrigé : un badge « contacté mais non confirmé » redevenait plein dès le QSO suivant, si bien qu’une entité contactée sur une bande affichait NEW BAND comme si elle ne l’avait jamais été. Quatre copies écrites à la main de la même conversion de statut avaient divergé — les deux qui rafraîchissent perdaient les drapeaux « non confirmé », et aucune ne transportait celui des locators. Il n’y en a plus qu’une.",
+      "Les cases Chasse (POTA, comtés US, préfixes, locators) s’appliquent désormais aux FT decodes et à Chase new, plus seulement au DX Cluster — elles disent ce que vous chassez, pas quel panneau est ouvert. Décochées, leurs badges et leurs puces de filtre disparaissent des trois écrans et il ne reste que les verdicts d’entité : NOUVEAU DXCC, bande, mode, slot.",
+      "Nouvelle page DXHunter dans les Préférences : tous les réglages de chasse y déménagent depuis la page DX Cluster — le mode de chasse, ses sources de confirmation et les cases POTA / SOTA / comtés US / préfixes / locators. Ils commandent trois écrans, ils ne vivent donc plus sous le nom d’un seul ; d’autres idées de DXHunter viendront s’y ajouter.",
+      "Chasser les états US rejoint les autres cases : décochée, le badge NOUVEL ÉTAT et sa puce de filtre se taisent partout.",
+      "FT Map : le zoom ne laisse plus une bande morte en bas. Leaflet mesure son conteneur une seule fois, à la création de la carte — ici l’instant où l’onglet est sélectionné, avant que la mise en page ne se soit stabilisée — et il est désormais prévenu à chaque changement de taille.",
+      "FT decodes : le filtre continent affiche les sept, toujours, au lieu des seuls présents dans le flux — la rangée ne se réorganise plus sous le pointeur quand la première station asiatique décode, et elle annonce ce que le filtre sait faire avant même d’avoir entendu quoi que ce soit.",
+      "Les spots du panadapter portent désormais la priorité SmartSDR : une entité jamais contactée d’abord, puis les besoins bande / mode / slot, puis POTA, SOTA, comté et préfixe, et le reste en dernier. La radio empile les spots proches en fréquence derrière un « + » et n’en dessine qu’un — elle choisit par priorité, si bien qu’un nouveau DXCC disparaissait derrière des stations déjà au log, faute pour OpsLog d’avoir dit laquelle méritait la place.",
+      "Une station déjà contactée sur la MÊME bande et le même mode n’annonce plus de besoin. La recontacter ne transformera pas une QSL manquante en confirmation : le badge se tait sur cet indicatif — et reste sur toutes les autres stations de l’entité, là où le besoin peut réellement être comblé."
+    ]
+  },
   {
     "version": "0.27.6",
     "date": "",

frontend/src/App.tsx

@@ -59,6 +59,7 @@ import { Combobox } from '@/components/ui/combobox';
 import { applyAwardRefs, parseAwardRefs as parseManualRefs, spotRefList , withIOTARef, withRDARef } from '@/lib/awardRefs';
 import { ListRadios, SetActiveRadio } from '../wailsjs/go/main/App';
 import { formatDistance } from '@/lib/units';
+import { bandForMHz } from '@/lib/bandplan';
 import { EventsOn, BrowserOpenURL, WindowMinimise, WindowToggleMaximise, WindowIsMaximised, Quit } from '../wailsjs/runtime/runtime';
 import type { adif as adifModels, lookup as lookupModels, cat as catModels } from '../wailsjs/go/models';
 import type { QSOForm, WorkedBeforeView, StationSettingsForm, ListsSettingsForm, ModePresetForm } from '@/types';
@@ -101,7 +102,7 @@ import { ExportFieldsDialog } from '@/components/ExportFieldsDialog';
 import { ShutdownProgress } from '@/components/ShutdownProgress';
 import { ClusterGrid } from '@/components/ClusterGrid';
 import { cleanSpotter, inferSpotMode, spotModeCategory, spotStatusKey } from '@/lib/spot';
-import { applySpotDisplay, chaseCounty, chaseGrid, chasePfx, chasePota, readSpotDisplayOptions, spotIsWorked, SPOT_DISPLAY_OPTIONS_EXPOSED } from '@/lib/spotDisplay';
+import { applySpotDisplay, chaseCounty, chaseGrid, chasePfx, chasePota, chaseState, readSpotDisplayOptions, spotIsWorked, SPOT_DISPLAY_OPTIONS_EXPOSED } from '@/lib/spotDisplay';
 import { AnswerDecode, HaltDecodeTx, LogUIError, FlexTXOnBand, GetMatrixColors, GetRotorPresets, GetRowColors, GetSpotTTLMinutes, GetSpotMax, IsNewUSCounty } from '../wailsjs/go/main/App';
 import { applyMatrixColors } from '@/lib/matrixColors';
 import { WorkedBeforeGrid } from '@/components/WorkedBeforeGrid';
@@ -432,21 +433,6 @@ function entryQSYCommand(text: string): { band?: string; hz?: number } | null {
   return null;
 }
 
-function bandForMHz(mhz: number): string {
-  if (!mhz || isNaN(mhz)) return '';
-  const plan: [number, number, string][] = [
-    [1.8, 2.0, '160m'], [3.5, 4.0, '80m'], [5.06, 5.45, '60m'], [7.0, 7.3, '40m'],
-    [10.1, 10.15, '30m'], [14.0, 14.35, '20m'], [18.068, 18.168, '17m'], [21.0, 21.45, '15m'],
-    [24.89, 24.99, '12m'], [28.0, 29.7, '10m'], [50, 54, '6m'], [70, 71, '4m'],
-    [144, 148, '2m'], [222, 225, '1.25m'], [420, 450, '70cm'], [902, 928, '33cm'], [1240, 1300, '23cm'],
-    // Microwave, ADIF 3.1.7 ranges — kept in step with BandFromHz on the Go side.
-    [2300, 2450, '13cm'], [3300, 3500, '9cm'], [5650, 5925, '6cm'], [10000, 10500, '3cm'],
-    [24000, 24250, '1.25cm'], [47000, 47200, '6mm'], [75500, 81000, '4mm'],
-    [119980, 123000, '2.5mm'], [134000, 149000, '2mm'], [241000, 250000, '1mm'],
-  ];
-  for (const [lo, hi, b] of plan) if (mhz >= lo && mhz <= hi) return b;
-  return '';
-}
 
 // modeAccent maps a mode to a theme-aware colour for the live-stations widget:
 // CW gold, phone green, digital blue, unknown muted.
@@ -2112,7 +2098,41 @@ export default function App() {
   // worked_slot must be carried explicitly like every other field: this map is
   // assembled field by field, so a backend flag that nobody copies here simply
   // never reaches the panels — silently, since the extra key is just dropped.
-  const [spotStatus, setSpotStatus] = useState<Record<string, { status: string; country?: string; continent?: string; worked_call?: boolean; worked_slot?: boolean; new_county?: boolean; county?: string; state?: string; lotw?: boolean; spotter_continent?: string; grid?: string; new_grid?: boolean; new_state?: boolean; new_pota?: boolean; unconf_status?: boolean; unconf_pfx?: boolean; unconf_cty?: boolean; unconf_state?: boolean; new_pfx?: boolean; pfx?: string }>>({});
+  // spotStatusEntry maps ONE backend verdict onto the entry the panels read.
+  //
+  // There were four of these, written by hand at each call site, and they had
+  // drifted apart: the two that RE-fetch — after a QSO is logged, and when a
+  // pane becomes visible — rebuilt every entry without the unconfirmed flags.
+  // So a badge drawn correctly as "worked, QSL missing" turned solid at the
+  // next refresh and stayed that way, which is how South Africa came to read
+  // NEW BAND on a band with four contacts in the log. grid_state was never
+  // copied by any of them, so a known-but-unconfirmed square never dimmed at
+  // all. One function now, so a field added to the backend cannot reach three
+  // callers and miss the fourth.
+  const spotStatusEntry = (r: any) => ({
+    status: r.status ?? '',
+    country: r.country,
+    continent: r.continent,
+    worked_call: !!r.worked_call,
+    worked_slot: !!r.worked_slot,
+    new_county: !!r.new_county,
+    lotw: !!r.lotw,
+    spotter_continent: r.spotter_continent,
+    grid: r.grid,
+    grid_state: r.grid_state,
+    new_grid: !!r.new_grid,
+    county: r.county,
+    state: r.state,
+    new_state: !!r.new_state,
+    new_pota: !!r.new_pota,
+    new_pfx: !!r.new_pfx,
+    pfx: r.pfx,
+    unconf_status: !!r.unconf_status,
+    unconf_pfx: !!r.unconf_pfx,
+    unconf_cty: !!r.unconf_cty,
+    unconf_state: !!r.unconf_state,
+  });
+  const [spotStatus, setSpotStatus] = useState<Record<string, { status: string; country?: string; continent?: string; worked_call?: boolean; worked_slot?: boolean; new_county?: boolean; county?: string; state?: string; lotw?: boolean; spotter_continent?: string; grid?: string; grid_state?: string; new_grid?: boolean; new_state?: boolean; new_pota?: boolean; unconf_status?: boolean; unconf_pfx?: boolean; unconf_cty?: boolean; unconf_state?: boolean; new_pfx?: boolean; pfx?: string }>>({});
   // Live mirror of spotStatus so the incoming-spot buffer can tell which slots
   // still need resolving without re-subscribing the cluster:spot listener.
   const spotStatusRef = useRef(spotStatus);
@@ -2185,11 +2205,7 @@ export default function App() {
         const next = { ...prev };
         for (const r of res) {
           const k = `${r.call}|${r.band ?? ''}|${(r.mode ?? '').toUpperCase()}`;
-          next[k] = {
+          next[k] = spotStatusEntry(r);
-            status: r.status ?? '', country: r.country, continent: (r as any).continent,
-            worked_call: !!(r as any).worked_call, worked_slot: !!(r as any).worked_slot, new_county: !!(r as any).new_county, lotw: !!(r as any).lotw, spotter_continent: (r as any).spotter_continent, grid: (r as any).grid, new_grid: !!(r as any).new_grid, county: (r as any).county, state: (r as any).state,
-            new_pota: !!(r as any).new_pota, new_pfx: !!(r as any).new_pfx, pfx: (r as any).pfx,
-          };
         }
         return next;
       });
@@ -3668,22 +3684,7 @@ export default function App() {
             const next = { ...prev };
             for (const r of res) {
               const k = `${r.call}|${r.band ?? ''}|${(r.mode ?? '').toUpperCase()}`;
-              next[k] = {
+              next[k] = spotStatusEntry(r);
-                status: r.status ?? '',
-                country: r.country,
-                continent: (r as any).continent,
-                worked_call: !!(r as any).worked_call,
-                worked_slot: !!(r as any).worked_slot,
-                new_county: !!(r as any).new_county, lotw: !!(r as any).lotw, spotter_continent: (r as any).spotter_continent, grid: (r as any).grid, new_grid: !!(r as any).new_grid, county: (r as any).county, state: (r as any).state,
-                new_state: !!(r as any).new_state,
-                unconf_status: !!(r as any).unconf_status,
-                unconf_pfx: !!(r as any).unconf_pfx,
-                unconf_cty: !!(r as any).unconf_cty,
-                unconf_state: !!(r as any).unconf_state,
-                new_pota: !!(r as any).new_pota,
-                new_pfx: !!(r as any).new_pfx,
-                pfx: (r as any).pfx,
-              };
             }
             return next;
           });
@@ -3777,23 +3778,7 @@ export default function App() {
             const next = { ...prev };
             for (const r of res) {
               const k = `${r.call}|${r.band ?? ''}|${(r.mode ?? '').toUpperCase()}`;
-              next[k] = {
+              next[k] = spotStatusEntry(r);
-                status: r.status ?? '',
-                country: r.country,
-                continent: (r as any).continent,
-                worked_call: !!(r as any).worked_call,
-                worked_slot: !!(r as any).worked_slot,
-                new_county: !!(r as any).new_county, lotw: !!(r as any).lotw,
-                grid: (r as any).grid, new_grid: !!(r as any).new_grid,
-                county: (r as any).county, state: (r as any).state,
-                new_state: !!(r as any).new_state,
-                unconf_status: !!(r as any).unconf_status,
-                unconf_pfx: !!(r as any).unconf_pfx,
-                unconf_cty: !!(r as any).unconf_cty,
-                unconf_state: !!(r as any).unconf_state,
-                new_pota: !!(r as any).new_pota,
-                new_pfx: !!(r as any).new_pfx, pfx: (r as any).pfx,
-              };
             }
             return next;
           });
@@ -4291,17 +4276,7 @@ export default function App() {
           const next = { ...prev };
           for (const r of res) {
             const k = `${r.call}|${r.band ?? ''}|${(r.mode ?? '').toUpperCase()}`;
-            next[k] = {
+            next[k] = spotStatusEntry(r);
-              status: r.status ?? '',
-              country: r.country,
-              continent: (r as any).continent,
-              worked_call: !!(r as any).worked_call,
-              worked_slot: !!(r as any).worked_slot,
-              new_county: !!(r as any).new_county, lotw: !!(r as any).lotw, spotter_continent: (r as any).spotter_continent, grid: (r as any).grid, new_grid: !!(r as any).new_grid, county: (r as any).county, state: (r as any).state,
-              new_pota: !!(r as any).new_pota,
-              new_pfx: !!(r as any).new_pfx,
-              pfx: (r as any).pfx,
-            };
           }
           return next;
         });
@@ -6290,7 +6265,8 @@ export default function App() {
             ]).filter((s: any) => (s.k !== 'new-pota' || chasePota())
               && (s.k !== 'new-county' || chaseCounty())
               && (s.k !== 'new-pfx' || chasePfx())
-              && (s.k !== 'new-grid' || chaseGrid()))
+              && (s.k !== 'new-grid' || chaseGrid())
+              && (s.k !== 'new-state' || chaseState()))
               .map((s: any) => fChip(s.k, s.label, s.cls, clusterStatusFilter.has(s.k),
               () => setClusterStatusFilter((cur) => { const n = new Set(cur); if (n.has(s.k)) n.delete(s.k); else n.add(s.k); return n; }), s.style))}
           </div>,
@@ -7435,6 +7411,7 @@ export default function App() {
             band={band}
             mode={mode}
             bands={bands}
+            modes={modes}
             satellites={satellites}
             onEditQso={openEdit}
             {...(!callsign.trim() && selQso ? {
@@ -8124,12 +8101,23 @@ export default function App() {
                 >
                   Disconnect all
                 </Button>
-                {clusterServerStatuses.length === 0 && (
+                {clusterServers.filter((x) => x.enabled).length === 0 && (
                   <span className="text-xs text-muted-foreground italic">
                     No active sessions — configure clusters in Settings → DX Cluster.
                   </span>
                 )}
-                {clusterServerStatuses.map((s) => {
+                {clusterServers
+                  .filter((x) => x.enabled)
+                  .sort((a, b) => a.sort_order - b.sort_order)
+                  .map((srv) => {
+                  // A disconnected server has no session to report, so it has no
+                  // entry in the status list at all — the pill stands in for it
+                  // as "disconnected", which is exactly the state you click to
+                  // undo.
+                  const live = clusterServerStatuses.find((x) => x.server_id === srv.id);
+                  const s: ServerStatus = live ?? {
+                    server_id: srv.id, name: srv.name, host: '', port: 0, state: 'disconnected',
+                  };
                   const isMaster = clusterServers
                     .filter((x) => x.enabled)
                     .sort((a, b) => a.sort_order - b.sort_order)[0]?.id === s.server_id;
@@ -8159,7 +8147,7 @@ export default function App() {
                         s.state === 'error' ? 'bg-danger-muted text-danger-muted-foreground border-danger-border' :
                         'bg-muted text-muted-foreground border-border',
                       )}
-                      title={`${s.name} — ${s.state.toUpperCase()}${s.retries ? ` #${s.retries}` : ''} · ${s.host}:${s.port}${s.error ? ' — ' + s.error : ''}\n${up || busy ? t('clu.pillDisconnect') : t('clu.pillConnect')}`}
+                      title={`${s.name} — ${s.state.toUpperCase()}${s.retries ? ` #${s.retries}` : ''}${s.host ? ` · ${s.host}:${s.port}` : ''}${s.error ? ' — ' + s.error : ''}\n${up || busy ? t('clu.pillDisconnect') : t('clu.pillConnect')}`}
                     >
                       {isMaster && <span className="text-warning" title="Master (commands go here)">★</span>}
                       {s.name}

frontend/src/components/BandSlotGrid.tsx

@@ -15,7 +15,10 @@ interface Props {
   busy: boolean;
   currentBand: string;
   currentMode: string;
-  bands?: string[]; // operator's configured bands; falls back to DEFAULT_BANDS
+  bands?: string[];
+  // The operator's configured mode list, in THEIR order: the digital row
+  // rotates through it.
+  modes?: string[]; // operator's configured bands; falls back to DEFAULT_BANDS
   hasCall?: boolean; // a callsign is being entered — only then highlight the "current entry" cell
   // DX station coordinates, for its sunrise/sunset. Optional: many spots resolve
   // to an entity with no position at all, and the block simply does not appear.
@@ -121,10 +124,31 @@ function cellTitle(t: (k: string) => string, band: string, cls: string, status:
   return `${band} ${cls}: ${desc}${mine ? ' — ' + mine : ''}${current ? ' — ' + t('mx.current') : ''}`;
 }
 
-export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCall = true, lat, lon, forCall, onEditQso }: Props) {
+export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, modes, hasCall = true, lat, lon, forCall, onEditQso }: Props) {
   const { t } = useI18n();
   // Cell drill-down: which band+class the operator clicked, or null.
   const [slot, setSlot] = useState<{ band: string; cls: string } | null>(null);
+
+  // The DIGITAL row is a rotation, not a fixed row.
+  //
+  // One row for every digital mode would be the honest layout and there is no
+  // height for it — the matrix sits in a fixed panel beside a dozen widgets.
+  // So the row keeps its place and changes what it answers: DIG (all of them),
+  // then each digital mode the operator actually uses, in the order their mode
+  // list gives, then back to DIG. The backend publishes the same cells under
+  // both the class name and the raw mode, so a rotation costs no round trip.
+  const digModes = useMemo(
+    () => (modes ?? [])
+      .map((m) => (m || '').toUpperCase().trim())
+      .filter((m) => m !== '' && m !== 'CW' && !PHONE_MODES.has(m)),
+    [modes],
+  );
+  const [digIdx, setDigIdx] = useState(0); // 0 = the DIG group itself
+  // A shorter mode list (the operator edited it) must not strand the rotation
+  // on a row that no longer exists.
+  const digPos = digModes.length ? digIdx % (digModes.length + 1) : 0;
+  const digRow = digPos === 0 ? 'DIG' : digModes[digPos - 1];
+  const cycleDig = () => setDigIdx((i) => (digModes.length ? (i + 1) % (digModes.length + 1) : 0));
   // Columns from the operator's configured bands (so the matrix shows only the
   // bands they actually use), falling back to the built-in default set.
   const cols = useMemo(
@@ -310,7 +334,7 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
       <table className="border-separate" style={{ borderSpacing: 3 }}>
         <thead>
           <tr>
-            <th className="w-[26px]" />
+            <th className="w-[38px] min-w-[38px] max-w-[38px]" />
             {cols.map((b) => (
               <th
                 key={b.tag}
@@ -325,13 +349,29 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
           </tr>
         </thead>
         <tbody>
-          {CLASSES.map((cls) => {
+          {CLASSES.map((clsBase) => {
-            const classCurrent = classMatchesMode(cls, currentMode);
+            const cls = clsBase === 'DIG' ? digRow : clsBase;
+            // On a specific digital mode the "you are here" mark has to be that
+            // mode, not any digital one — otherwise every FT4 entry lights the
+            // FT8 row it happens to be cycled to.
+            const classCurrent = cls === clsBase
+              ? classMatchesMode(cls, currentMode)
+              : (currentMode || '').toUpperCase() === cls;
             return (
               <tr key={cls}>
                 <th
+                  onClick={clsBase === 'DIG' && digModes.length ? cycleDig : undefined}
+                  title={clsBase === 'DIG' && digModes.length ? t('bsg.digCycle') : undefined}
                   className={cn(
-                    'font-mono text-[11px] font-semibold pr-1.5 text-right w-[26px]',
+                    // Sized once for the LONGEST label the rotation can show,
+                    // and pinned there: a column that grows when RTTY comes
+                    // round shifts every band beneath it, and the eye reads
+                    // that as the matrix moving rather than the row changing.
+                    'font-mono font-semibold pr-1.5 text-right w-[38px] min-w-[38px] max-w-[38px] overflow-hidden',
+                    // Beyond four characters (PSK31, MSK144) the type gives way
+                    // instead of the column.
+                    cls.length > 4 ? 'text-[9px]' : 'text-[11px]',
+                    clsBase === 'DIG' && digModes.length ? 'cursor-pointer hover:text-foreground' : '',
                     classCurrent ? 'text-primary font-extrabold' : 'text-muted-foreground',
                   )}
                 >

frontend/src/components/BulkEditModal.tsx

@@ -56,6 +56,8 @@ const FIELDS: FieldDef[] = [
   { id: 'hamlog_sent_date',  label: 'bulk.fHamlogSentDate',  group: 'QSL / upload', kind: 'date' },
   { id: 'hamlog_rcvd',       label: 'bulk.fHamlogRcvd',      group: 'QSL / upload', kind: 'status' },
   { id: 'hamlog_rcvd_date',  label: 'bulk.fHamlogRcvdDate',  group: 'QSL / upload', kind: 'date' },
+  { id: 'hamqth_sent',       label: 'bulk.fHamqthSent',      group: 'QSL / upload', kind: 'status' },
+  { id: 'hamqth_sent_date',  label: 'bulk.fHamqthSentDate',  group: 'QSL / upload', kind: 'date' },
   // My station / operator
   { id: 'station_callsign', label: 'bulk.fStationCall',  group: 'My station', kind: 'text', upper: true },
   { id: 'operator',         label: 'bulk.fOperator',     group: 'My station', kind: 'text', upper: true },

frontend/src/components/ChaseNewPanel.tsx

@@ -12,6 +12,7 @@ import { useEffect, useMemo, useState } from 'react';
 import { Radar, Loader2, X } from 'lucide-react';
 import { formatDistance } from '@/lib/units';
 import { useI18n } from '@/lib/i18n';
+import { chaseAllows } from '@/lib/spotDisplay';
 import { markerColour } from '@/lib/spotMarkers';
 import { cn } from '@/lib/utils';
 import { GetChaseNewSpots } from '../../wailsjs/go/main/App';
@@ -60,6 +61,10 @@ const CATEGORIES: Array<{ key: Category; labelKey: string; colour: string }> = [
 ];
 
 // categoryOf is the single thing a row says about a station.
+//
+// A category the operator does not chase is not a category here either: with
+// prefixes and squares switched off this panel showed rows whose only reason
+// for being listed had been withdrawn everywhere else.
 function categoryOf(s: ChaseNewSpot): Category | null {
   switch (s.status) {
     case 'new': return 'dxcc';
@@ -68,8 +73,8 @@ function categoryOf(s: ChaseNewSpot): Category | null {
     case 'new-mode': return 'mode';
     case 'new-slot': return 'slot';
   }
-  if (s.new_pfx) return 'pfx';
+  if (s.new_pfx && chaseAllows('pfx')) return 'pfx';
-  if (s.new_grid) return 'grid';
+  if (s.new_grid && chaseAllows('grid')) return 'grid';
   return null;
 }
 
@@ -83,7 +88,7 @@ function loadFilters(): Set<Category> {
       if (Array.isArray(list)) return new Set(list);
     }
   } catch { /* a corrupt preference is not worth a broken panel */ }
-  return new Set(CATEGORIES.map((c) => c.key));
+  return new Set(CATEGORIES.filter((c) => chaseAllows(c.key)).map((c) => c.key));
 }
 
 export function ChaseNewPanel({ onPick, onClose }: Props) {
@@ -132,7 +137,7 @@ export function ChaseNewPanel({ onPick, onClose }: Props) {
 
         {/* Filters, in the same order and colours as the badges they hide. */}
         <div className="flex flex-1 flex-wrap items-center gap-1">
-          {CATEGORIES.map((c) => (
+          {CATEGORIES.filter((c) => chaseAllows(c.key)).map((c) => (
             <button
               key={c.key}
               type="button"

frontend/src/components/DecodesPanel.tsx

@@ -16,6 +16,7 @@ import { useEffect, useMemo, useState } from 'react';
 import { Radio, Search, X, Signal, ArrowUpRight, Timer, Trash2, Ban, Columns2, Bot } from 'lucide-react';
 import { cn } from '@/lib/utils';
 import { useI18n } from '@/lib/i18n';
+import { chaseAllows } from '@/lib/spotDisplay';
 import { markerColour, type SpotMarkerKey } from '@/lib/spotMarkers';
 import { writeUiPref } from '@/lib/uiPref';
 
@@ -120,6 +121,9 @@ interface Props {
 // that starts by hiding most of the band would be lying about what is on it.
 type NewCat = 'dxcc' | 'band' | 'mode' | 'slot' | 'pfx' | 'grid' | 'pota' | 'cty' | 'state';
 
+// The seven, in the order an operator reads them.
+const CONTINENTS = ['AF', 'AN', 'AS', 'EU', 'NA', 'OC', 'SA'];
+
 const NEW_CATS: { key: NewCat; label: string; colour: string }[] = [
   { key: 'dxcc', label: 'dec.stNew',    colour: 'var(--success)' },
   { key: 'band', label: 'dec.stBand',   colour: 'var(--warning)' },
@@ -629,27 +633,25 @@ export function DecodesPanel({ decodes, txMsgs, txState, txStates, spotStatus, o
   // dropdowns were pure furniture for most operators; they appear the day a
   // second instance puts a second band on the link, which is the only day they
   // mean anything.
-  const { bands, modes, conts, instances } = useMemo(() => {
+  const { bands, modes, instances } = useMemo(() => {
-    const b = new Set<string>(), m = new Set<string>(), c = new Set<string>(), i = new Set<string>();
+    const b = new Set<string>(), m = new Set<string>(), i = new Set<string>();
     for (const d of decodes) {
       if (d.band) b.add(d.band);
       if (d.mode) m.add(d.mode);
       if (d.instance) i.add(d.instance);
-      const ct = statusOf(d)?.continent;
-      if (ct) c.add(ct);
     }
-    return { bands: [...b].sort(), modes: [...m].sort(), conts: [...c].sort(), instances: [...i].sort() };
+    return { bands: [...b].sort(), modes: [...m].sort(), instances: [...i].sort() };
     // eslint-disable-next-line react-hooks/exhaustive-deps
   }, [decodes, spotStatus]);
 
-  // The chips are the continents on the feed — a selector with nothing to choose
+  // All seven, always, in their usual order.
-  // is furniture — PLUS anything currently selected. Without that second half a
+  //
-  // filter can strand itself: pick AF, the last African station stops decoding,
+  // The chips used to be built from the continents ON the feed, which read as a
-  // and the list empties with no chip left to switch it back off.
+  // list that reshuffled itself every period: a chip appeared when the first
-  const contChips = useMemo(
+  // Asian station decoded and moved everything sideways under the pointer. A
-    () => [...new Set([...conts, ...contList])].sort(),
+  // fixed row can be aimed at — you learn where OC is and it stays there — and
-    [conts, contList],
+  // it also says what the filter can do before anything has been heard.
-  );
+  const contChips = CONTINENTS;
 
   const filtered = useMemo(() => {
     const q = search.trim().toUpperCase();
@@ -743,7 +745,7 @@ export function DecodesPanel({ decodes, txMsgs, txState, txStates, spotStatus, o
         {/* Per-category badges, in the colours of the flags they select — the
             same vocabulary as the Chase New panel. */}
         <span className="flex items-center gap-1 pl-1 border-l border-border/60 ml-1" title={t('dec.catsHint')}>
-          {NEW_CATS.map((c) => {
+          {NEW_CATS.filter((c) => chaseAllows(c.key)).map((c) => {
             const on = cats.has(c.key);
             return (
               <button
@@ -1051,7 +1053,7 @@ export function DecodesPanel({ decodes, txMsgs, txState, txStates, spotStatus, o
               const e = statusOf(d);
               const st = e?.status && e.status !== 'worked' ? e.status : '';
               const entities = st ? entityBadgesFor(st) : [];
-              const extras = EXTRA_BADGES.filter((b) => !!e?.[b.key]);
+              const extras = EXTRA_BADGES.filter((b) => !!e?.[b.key] && chaseAllows(b.key as string));
               const mine = !!me && d.call === me;
               const hot = entities.length > 0 || extras.length > 0;
               // Someone answering us outranks everything else on the screen.

frontend/src/components/DetailsPanel.tsx

@@ -71,6 +71,7 @@ interface Props {
   band: string;
   mode: string;
   bands?: string[]; // configured bands for the worked-before matrix columns
+  modes?: string[]; // configured modes, in order — the matrix cycles its digital row through them
   // The station's satellites, for the SAT_NAME dropdown. Passed in rather than
   // read here: the list lives in Preferences, and App already reloads it when
   // Preferences close — a panel reading it once at mount would need a restart.
@@ -155,7 +156,7 @@ function Field({ label, span = 1, className, children }: { label: string; span?:
   );
 }
 
-export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, satellites = [], slotCall, slotBand, slotMode, slotWb, slotWbBusy, tab, onTab, keyerActive, onEditQso }: Props) {
+export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, modes, satellites = [], slotCall, slotBand, slotMode, slotWb, slotWbBusy, tab, onTab, keyerActive, onEditQso }: Props) {
   const { t } = useI18n();
   const [internalOpen, setInternalOpen] = useState<TabName>('stats');
   const open = tab ?? internalOpen; // controlled when `tab` is provided
@@ -294,6 +295,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth,
             currentBand={slotCall ? (slotBand ?? '') : band}
             currentMode={slotCall ? (slotMode ?? '') : mode}
             bands={bands}
+            modes={modes}
             hasCall={slotCall ? true : callsign.trim() !== ''}
             forCall={slotCall}
             onEditQso={onEditQso}

frontend/src/components/FTMapPanel.tsx

@@ -62,7 +62,25 @@ export function FTMapPanel({ decodes, myGrid }: { decodes: FTMapDecode[]; myGrid
     });
     mapRef.current = m;
     layerRef.current = L.layerGroup().addTo(m);
-    return () => { m.remove(); mapRef.current = null; layerRef.current = null; };
+    // Leaflet measures its container ONCE, when the map is created, and then
+    // draws tiles for that size for ever. This panel is mounted the moment its
+    // tab is selected — before the flex layout has settled — and the window can
+    // be resized under it, so the stale measurement showed as a strip of dead
+    // space along the bottom where tiles were never asked for. The observer
+    // hands it the real size whenever the box changes.
+    const ro = new ResizeObserver(() => m.invalidateSize({ animate: false }));
+    ro.observe(divRef.current);
+    // Once more after the first paint: the first observation can arrive while
+    // the panel is still zero-height, and no further resize follows a layout
+    // that settles by itself.
+    const settle = window.setTimeout(() => m.invalidateSize({ animate: false }), 100);
+    return () => {
+      window.clearTimeout(settle);
+      ro.disconnect();
+      m.remove();
+      mapRef.current = null;
+      layerRef.current = null;
+    };
   }, []);
 
   // Basemap follows the picker.

frontend/src/components/FilterBuilder.tsx

@@ -96,6 +96,8 @@ const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'hamlog_sent_date', label: 'fltb.fHamlogSentDate', type: 'adifdate' },
   { value: 'hamlog_rcvd', label: 'fltb.fHamlogRcvd', type: 'text' },
   { value: 'hamlog_rcvd_date', label: 'fltb.fHamlogRcvdDate', type: 'adifdate' },
+  { value: 'hamqth_sent', label: 'fltb.fHamqthSent', type: 'text' },
+  { value: 'hamqth_sent_date', label: 'fltb.fHamqthSentDate', type: 'adifdate' },
   { value: 'contest_id', label: 'fltb.fContestId', type: 'text' },
   { value: 'srx', label: 'fltb.fSerialRcvd', type: 'number' },
   { value: 'stx', label: 'fltb.fSerialSent', type: 'number' },

frontend/src/components/IcomPanel.tsx

@@ -53,7 +53,13 @@ const ZERO: IcomState = {
 type Band = { l: string; hz: number };
 
 const HF_BANDS: Band[] = [
-  { l: '160', hz: 1_840_000 }, { l: '80', hz: 3_750_000 }, { l: '40', hz: 7_100_000 },
+  { l: '160', hz: 1_840_000 }, { l: '80', hz: 3_750_000 },
+  // 60 m: the middle of the IARU Region 1 allocation (5351.5-5366.5 kHz), which
+  // every 60 m-capable rig can display. Where the band is channelised (the US)
+  // the operator moves to their channel from here — the button is a way onto
+  // the band, not a claim about what may be transmitted on it.
+  { l: '60', hz: 5_354_000 },
+  { l: '40', hz: 7_100_000 },
   { l: '30', hz: 10_130_000 }, { l: '20', hz: 14_150_000 }, { l: '17', hz: 18_130_000 },
   { l: '15', hz: 21_250_000 }, { l: '12', hz: 24_950_000 }, { l: '10', hz: 28_400_000 },
 ];
@@ -78,9 +84,36 @@ function bandsFor(model?: string): Band[] {
   return [...HF_BANDS, B6];
 }
 
-// Mode buttons for the console (like RS-BA1's row). SetCATMode picks USB/LSB for
+// Mode buttons for the console (like RS-BA1's row).
-// SSB by frequency and the rig's data variant for digital modes.
+//
-const MODES = ['SSB', 'CW', 'RTTY', 'PSK', 'AM', 'FM', 'DATA'];
+// LSB and USB by NAME, not one "SSB" button that resolves by band: the band
+// convention is right for a logged mode and useless when the operator means
+// "put this radio in USB on 40 m", which the console could not express at all.
+//
+// PSK is native only on the 7610/7760/7851 class; every other rig NAKs 0x12, so
+// there the button is dead furniture — see modesFor. Soundcard PSK31 rides on
+// DATA, which every rig can do.
+const MODES_BASE = ['LSB', 'USB', 'CW', 'RTTY', 'AM', 'FM', 'DATA'];
+
+function hasNativePSK(model?: string): boolean {
+  const m = (model ?? '').toUpperCase();
+  return m.includes('7610') || m.includes('7760') || m.includes('7851') ||
+    m.includes('7800') || m.includes('7700');
+}
+
+function modesFor(model?: string): string[] {
+  if (!hasNativePSK(model)) return MODES_BASE;
+  return [...MODES_BASE.slice(0, 4), 'PSK', ...MODES_BASE.slice(4)];
+}
+
+// Which radios actually have an antenna selector on the CI-V command (0x12).
+// An IC-7300 has ONE socket: offering it ANT1/ANT2 was two buttons that could
+// only ever disagree with the front panel.
+function hasAntennaSelector(model?: string): boolean {
+  const m = (model ?? '').toUpperCase();
+  return m.includes('7610') || m.includes('7760') || m.includes('7851') ||
+    m.includes('7800') || m.includes('7700') || m.includes('9700');
+}
 
 // Attenuator steps are MODEL-dependent even though the CI-V command (0x11) is the
 // same: the value byte is the dB. The IC-7610 (and 7700/7800/7851) have a 6/12/18
@@ -155,9 +188,21 @@ function icomWatts(pct: number): { w: number; defl: number } {
   return { w: Math.round(w), defl };
 }
 
-function modeMatches(btn: string, cur?: string): boolean {
+// Which sideband a bare "SSB" means at this frequency — the same convention the
+// backend applies when it resolves the mode for the radio.
+function sideForHz(hz?: number): string | null {
+  if (!hz || hz <= 0) return null;
+  return hz < 10_000_000 ? 'LSB' : 'USB';
+}
+
+function modeMatches(btn: string, cur?: string, hz?: number): boolean {
   if (!cur) return false;
-  if (btn === 'SSB') return cur === 'SSB' || cur === 'USB' || cur === 'LSB';
+  // A rig that reports the folded ADIF "SSB" still lights the side its
+  // frequency implies, so the row is never blank on a phone contact.
+  if (btn === 'USB' || btn === 'LSB') {
+    if (cur === btn) return true;
+    return cur === 'SSB' && btn === (sideForHz(hz) ?? '');
+  }
   // The backend surfaces USB-D as the operator's digital default (FT8…), or as
   // plain DATA — either way it is the DATA button that should light.
   if (btn === 'DATA') return ['DATA', 'FT8', 'FT4', 'JS8', 'JT65', 'JT9', 'MFSK', 'OLIVIA'].includes(cur);
@@ -507,9 +552,10 @@ export function IcomPanel({ onReportRST, isNetwork = false }: { onReportRST?: (r
           </div>
         </div>
         {/* Mode selector row (RS-BA1's SSB/CW/RTTY/PSK/AM/FM). */}
-        <div className="grid grid-cols-7 border-t border-border/60 divide-x divide-border/60">
+        <div className="grid border-t border-border/60 divide-x divide-border/60"
-          {MODES.map((m) => {
+          style={{ gridTemplateColumns: `repeat(${modesFor(st.model).length}, minmax(0, 1fr))` }}>
-            const on = modeMatches(m, curMode);
+          {modesFor(st.model).map((m) => {
+            const on = modeMatches(m, curMode, mainHz);
             return (
               <button key={m} type="button" onClick={() => setMode(m)}
                 className={cn('py-1.5 text-[11px] font-bold tracking-wide transition-colors',
@@ -561,10 +607,12 @@ export function IcomPanel({ onReportRST, isNetwork = false }: { onReportRST?: (r
             );
           })}
         </div>
+        {hasAntennaSelector(st.model) && (
           <Row label={t('icmp.antenna')}>
             <Segmented value={String(st.antenna)} options={[{ v: '1', l: 'ANT1' }, { v: '2', l: 'ANT2' }]}
               onChange={(v) => set({ antenna: parseInt(v) }, () => IcomSetAntenna(parseInt(v)))} />
           </Row>
+        )}
       </Card>
 
       {/* Clarifiers: RIT & ΔTX (XIT) — wheel or ± to shift, Ctrl+←/→ shifts RIT. */}
@@ -588,7 +636,10 @@ export function IcomPanel({ onReportRST, isNetwork = false }: { onReportRST?: (r
             {(st.model ?? '').includes('7760') ? `${st.rf_power * 2} W` : st.rf_power}
           </span>
         </Row>
-        {isPhone && (
+        {/* Not phone-only: on USB-D the same control still sets what the radio
+            transmits at, and hiding it left an operator who lives in FT8 with
+            no mic gain at all. */}
+        {(
           <Row label={t('icmp.mic')}>
             <Slider value={st.mic_gain} accent="#ef4444" onChange={(v) => set({ mic_gain: v }, () => IcomSetMicGain(v))} />
             <span className="w-8 text-right text-xs font-mono tabular-nums text-muted-foreground">{st.mic_gain}</span>

frontend/src/components/QSLManagerModal.tsx

@@ -8,7 +8,7 @@ import {
   Select, SelectTrigger, SelectValue, SelectContent, SelectItem,
 } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
-import { GetLoTWQSLDetail, SetLoTWQSLDetail, GetLoTWDownloadAllCalls, SetLoTWDownloadAllCalls, OpenExternalURL, FindQSOsForUpload, UploadQSOsManual, DownloadConfirmations, CancelConfirmations, ImportHamlogConfirmations, ExportHamlogUnmatched, OpenADIFFile, SaveADIFFile, SyncPOTAHunterLog, ListQSO, BulkUpdateQSL, UploadCallsign, GetSlotStats } from '../../wailsjs/go/main/App';
+import { GetLoTWQSLDetail, SetLoTWQSLDetail, GetLoTWDownloadAllCalls, SetLoTWDownloadAllCalls, OpenExternalURL, FindQSOsForUpload, UploadFullLogHamQTH, UploadQSOsManual, DownloadConfirmations, CancelConfirmations, ImportHamlogConfirmations, ExportHamlogUnmatched, OpenADIFFile, SaveADIFFile, SyncPOTAHunterLog, ListQSO, BulkUpdateQSL, UploadCallsign, GetSlotStats } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { RecentQSOsGrid } from '@/components/RecentQSOsGrid';
 import { EventsOn } from '../../wailsjs/runtime/runtime';
@@ -723,7 +723,25 @@ export function QSLManagerPanel({ onEditQSO, actions, paperRequest }: {
       {service !== 'pota' && service !== 'paper' && (
       <div className="flex items-center justify-between gap-2 px-3 py-2 border-t border-border bg-muted/20 shrink-0">
         <div className="flex items-center gap-2 flex-wrap">
-          {service === 'hamlog' ? (
+          {service === 'hamqth' ? (
+            // HamQTH's file endpoint REPLACES the remote log — its own
+            // documentation is explicit that partial uploads do not exist. So
+            // it is offered as its own deliberate act, never as the batch path
+            // behind "send these": that would delete everything not selected.
+            <Button variant="outline" size="sm" disabled={busy}
+              title={t('qslm.hqFullTitle')}
+              onClick={async () => {
+                if (!window.confirm(t('qslm.hqFullConfirm'))) return;
+                // Same three lines every other action here runs: without
+                // setShowLog the whole upload reported itself into a panel
+                // nobody was showing, and the tab sat on "Pick a service".
+                setLogLines([]); setBusy(true); setLogAction('upload'); setShowLog(true);
+                try { await UploadFullLogHamQTH(); }
+                catch (e: any) { setBusy(false); setLogLines((l) => [...l, String(e?.message ?? e)]); }
+              }}>
+              <UploadCloud className="size-3.5" /> {t('qslm.hqFull')}
+            </Button>
+          ) : service === 'hamlog' ? (
             <>
             <Button variant="outline" size="sm" onClick={importHamlogCfm} disabled={busy}
               title={t('qslm.hamlogImportTitle')}>

frontend/src/components/QSOEditModal.tsx

@@ -22,6 +22,7 @@ import { Combobox } from '@/components/ui/combobox';
 import { cn } from '@/lib/utils';
 import { flagURL } from '@/lib/flags';
 import { useI18n } from '@/lib/i18n';
+import { bandForMHz } from '@/lib/bandplan';
 import { titleCase, sentenceCase } from '@/lib/textCase';
 import type { QSOForm } from '@/types';
 
@@ -312,6 +313,19 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
   const splitHz = (hz?: number) => hz
     ? { khz: String(Math.floor(hz / 1000)), hz: String(hz % 1000).padStart(3, '0') }
     : { khz: '', hz: '' };
+  // Correcting a frequency corrects its band. The pair has to agree — the log,
+  // every award and every upload are read on the BAND — and an operator fixing
+  // a wrong frequency is not also expecting to fix the band by hand, which is
+  // exactly how a QSO ends up filed on 20m at 7 MHz.
+  //
+  // Only when the number lands in a known allocation: half a frequency is typed
+  // on the way to all of it, and a band must never be blanked by that.
+  const syncBand = (khz: string, hz: string, field: 'band' | 'band_rx') => {
+    if (!khz.trim()) return;
+    const b = bandForMHz((parseInt(khz, 10) * 1000 + (parseInt(hz, 10) || 0)) / 1_000_000);
+    if (b) set(field, b as any);
+  };
+
   const f0 = splitHz(draft.freq_hz);
   const fr0 = splitHz(draft.freq_rx_hz);
   const [freqKHz, setFreqKHz] = useState(f0.khz);
@@ -634,13 +648,13 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                   </div>
                   <div className="flex items-center gap-2">
                     <Label className="w-20 shrink-0">{t('qedit.txFreq')}</Label>
-                    <Input value={freqKHz} onChange={(e) => setFreqKHz(e.target.value.replace(/\D/g, ''))} className="font-mono w-24" placeholder="kHz" />
+                    <Input value={freqKHz} onChange={(e) => { const v = e.target.value.replace(/\D/g, ''); setFreqKHz(v); syncBand(v, freqHz, 'band'); }} className="font-mono w-24" placeholder="kHz" />
-                    <Input value={freqHz} onChange={(e) => setFreqHz(e.target.value.replace(/\D/g, ''))} maxLength={3} className="font-mono w-16" placeholder="Hz" />
+                    <Input value={freqHz} onChange={(e) => { const v = e.target.value.replace(/\D/g, ''); setFreqHz(v); syncBand(freqKHz, v, 'band'); }} maxLength={3} className="font-mono w-16" placeholder="Hz" />
                   </div>
                   <div className="flex items-center gap-2">
                     <Label className="w-20 shrink-0">{t('qedit.rxFreq')}</Label>
-                    <Input value={freqRxKHz} onChange={(e) => setFreqRxKHz(e.target.value.replace(/\D/g, ''))} className="font-mono w-24" placeholder="kHz" />
+                    <Input value={freqRxKHz} onChange={(e) => { const v = e.target.value.replace(/\D/g, ''); setFreqRxKHz(v); syncBand(v, freqRxHz, 'band_rx'); }} className="font-mono w-24" placeholder="kHz" />
-                    <Input value={freqRxHz} onChange={(e) => setFreqRxHz(e.target.value.replace(/\D/g, ''))} maxLength={3} className="font-mono w-16" placeholder="Hz" />
+                    <Input value={freqRxHz} onChange={(e) => { const v = e.target.value.replace(/\D/g, ''); setFreqRxHz(v); syncBand(freqRxKHz, v, 'band_rx'); }} maxLength={3} className="font-mono w-16" placeholder="Hz" />
                   </div>
                 </div>
 

frontend/src/components/RecentQSOsGrid.tsx

@@ -219,6 +219,9 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'Uploads', label: t('rqg.c.hamlog_sent_date'), colId: 'hamlog_sent_date', headerName: t('rqg.h.hamlog_sent_date'), width: 110, valueGetter: (p) => fmtDateOnly((p.data as any)?.extras?.['APP_OPSLOG_HAMLOG_SENT_DATE']), defaultVisible: false },
   { group: 'Uploads', label: t('rqg.c.hamlog_rcvd'), colId: 'hamlog_rcvd', headerName: t('rqg.h.hamlog_rcvd'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_HAMLOG_QSO_CFM'] || e['APP_OPSLOG_HAMLOG_QSL'] || 'N'; }, defaultVisible: false },
   { group: 'Uploads', label: t('rqg.c.hamlog_rcvd_date'), colId: 'hamlog_rcvd_date', headerName: t('rqg.h.hamlog_rcvd_date'), width: 110, valueGetter: (p) => fmtDateOnly((p.data as any)?.extras?.['APP_OPSLOG_HAMLOG_QSL_DATE']), defaultVisible: false },
+  // HamQTH, the extras again — sent only, the site having no confirmations.
+  { group: 'Uploads', label: t('rqg.c.hamqth_sent'), colId: 'hamqth_sent', headerName: t('rqg.h.hamqth_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_HAMQTH_SENT'] || 'N'; }, defaultVisible: false },
+  { group: 'Uploads', label: t('rqg.c.hamqth_sent_date'), colId: 'hamqth_sent_date', headerName: t('rqg.h.hamqth_sent_date'), width: 110, valueGetter: (p) => fmtDateOnly((p.data as any)?.extras?.['APP_OPSLOG_HAMQTH_SENT_DATE']), defaultVisible: false },
   // App-specific: when the QSO's audio recording was e-mailed to the station.
   { group: 'QSL', label: t('rqg.c.opslog_recording_sent'), colId: 'opslog_recording_sent', headerName: t('rqg.h.opslog_recording_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_RECORDING_SENT'] ? 'Y' : 'N'; }, defaultVisible: false },
 

frontend/src/components/SettingsModal.tsx

@@ -213,6 +213,7 @@ type SectionId =
   | 'lists-modes'
   | 'lists-satellites'
   | 'cluster'
+  | 'dxhunter'
   | 'backup'
   | 'database'
   | 'autostart'
@@ -325,6 +326,7 @@ function buildTree(flexAvailable: boolean, t: (k: string) => string): TreeNode[]
         { kind: 'item', label: t('sec.satellites'), id: 'lists-satellites' },
       ]},
       { kind: 'item', label: t('sec.cluster'),     id: 'cluster' },
+      { kind: 'item', label: t('sec.dxhunter'),    id: 'dxhunter' },
       { kind: 'item', label: t('sec.udp'), id: 'udp' },
       { kind: 'item', label: t('sec.adifmon'), id: 'adifmon' },
       { kind: 'item', label: t('sec.foldersync'), id: 'foldersync' },
@@ -1612,7 +1614,7 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
     icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0, offset_on: false, offset_hz: 0,
     digital_default: 'FT8', share_enabled: false, share_port: 4532, share_proto: 'rigctl', share_tci_port: 40001,
-    ptt_hotkey_enabled: false, ptt_hotkey: '', ptt_hotkey_toggle: false,
+    ptt_hotkey_enabled: false, ptt_hotkey: '', ptt_hotkey_toggle: false, digi_as_usb: false,
   });
   // Brand + connection, derived from the stored backend rather than held
   // separately: two sources for one fact drift apart the first time something
@@ -2081,6 +2083,7 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
   const [chasePotaOn, setChasePotaOn] = useState(() => localStorage.getItem('opslog.chasePota') !== '0');
   const [chaseCountyOn, setChaseCountyOn] = useState(() => localStorage.getItem('opslog.chaseCounty') !== '0');
   const [chasePfxOn, setChasePfxOn] = useState(() => localStorage.getItem('opslog.chasePfx') !== '0');
+  const [chaseStateOn, setChaseStateOn] = useState(() => localStorage.getItem('opslog.chaseState') !== '0');
   const [chaseSotaOn, setChaseSotaOn] = useState(() => localStorage.getItem('opslog.chaseSota') !== '0');
   const [chaseNew, setChaseNew] = useState(false);
   const [spotTTL, setSpotTTL] = useState(0);
@@ -3840,6 +3843,13 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
                 </label>              </>
             )}
           </div>
+          <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('cat.digiUsbHint')}>
+            <Checkbox
+              checked={!!catCfg.digi_as_usb}
+              onCheckedChange={(c) => setCatCfg((s) => ({ ...s, digi_as_usb: !!c }))}
+            />
+            {t('cat.digiUsb')}
+          </label>
           {catCfg.backend === 'omnirig' && (
           <>
           <label className="flex items-center gap-2 text-sm cursor-pointer">
@@ -5229,6 +5239,131 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
     setEditingServer(next);
   }
 
+  // Chasing is not a cluster feature.
+  //
+  // These switches were born on the DX Cluster page because the cluster was the
+  // only thing that drew their badges. They now decide what the FT decode list
+  // and Chase new say as well, and settings that govern three screens do not
+  // belong under the name of one of them. The page is called DXHunter because
+  // that is what it is about — hunting DX — and because more of DXHunter's
+  // ideas are meant to land beside them.
+  function DXHunterPanel() {
+    return (
+      <>
+        <h3 className="text-sm font-semibold">{t('sec.dxhunter')}</h3>
+        <p className="text-xs text-muted-foreground -mt-1">{t('dxh.intro')}</p>
+        <div className="space-y-3">
+          <div className="border-t border-border/60 pt-3 space-y-2">
+            {/* Chase switches: off, the marker stops being TOLD, everywhere at
+                once — badge, colour, filter chip, reference column. A "new band
+                + new POTA" spot then reads NEW BAND alone. */}
+          {/* The GLOBAL hunt: every category (DXCC, band, mode, slot, prefix,
+              county, state, grid) judged as new-only or new-plus-unconfirmed,
+              against the confirmation sources the operator trusts. */}
+          <div className="rounded-lg border border-border p-3 space-y-2">
+            <div className="flex items-center gap-2">
+              <span className="text-xs text-muted-foreground w-28 shrink-0">{t('chg.mode')}</span>
+              <Select value={chaseCfg.mode} onValueChange={(v) => { const next = { ...chaseCfg, mode: v }; setChaseCfg(next); void SaveChaseSettings(next as any); }}>
+                <SelectTrigger className="h-7 w-64 text-xs"><SelectValue /></SelectTrigger>
+                <SelectContent>
+                  <SelectItem value="new">{t('gsc.huntNew')}</SelectItem>
+                  <SelectItem value="new_unconfirmed">{t('gsc.huntUnconf')}</SelectItem>
+                </SelectContent>
+              </Select>
+            </div>
+            {chaseCfg.mode === 'new_unconfirmed' && (
+              <div className="flex items-center gap-4 flex-wrap pl-2">
+                <span className="text-xs text-muted-foreground">{t('chg.sources')}</span>
+                {([['lotw', 'LoTW'], ['card', t('chg.card')], ['eqsl', 'eQSL'], ['qrz', 'QRZ.com']] as const).map(([k, label]) => (
+                  <label key={k} className="flex items-center gap-1.5 text-xs cursor-pointer">
+                    <Checkbox checked={chaseCfg.sources.includes(k)}
+                      onCheckedChange={(c) => {
+                        const sources = c ? [...chaseCfg.sources, k] : chaseCfg.sources.filter((x) => x !== k);
+                        const next = { ...chaseCfg, sources };
+                        setChaseCfg(next); void SaveChaseSettings(next as any);
+                      }} />
+                    {label}
+                  </label>
+                ))}
+              </div>
+            )}
+          </div>
+
+            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chasePotaHint')}>
+              <Checkbox checked={chasePotaOn}
+                onCheckedChange={(c) => { const v = !!c; setChasePotaOn(v); writeUiPref('opslog.chasePota', v ? '1' : '0'); }} />
+              {t('clu.chasePota')}
+            </label>
+            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chaseSotaHint')}>
+              <Checkbox checked={chaseSotaOn}
+                onCheckedChange={(c) => { const v = !!c; setChaseSotaOn(v); writeUiPref('opslog.chaseSota', v ? '1' : '0'); }} />
+              {t('clu.chaseSota')}
+            </label>
+            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chaseCountyHint')}>
+              <Checkbox checked={chaseCountyOn}
+                onCheckedChange={(c) => { const v = !!c; setChaseCountyOn(v); writeUiPref('opslog.chaseCounty', v ? '1' : '0'); }} />
+              {t('clu.chaseCounty')}
+            </label>
+            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chasePfxHint')}>
+              <Checkbox checked={chasePfxOn}
+                onCheckedChange={(c) => { const v = !!c; setChasePfxOn(v); writeUiPref('opslog.chasePfx', v ? '1' : '0'); }} />
+              {t('clu.chasePfx')}
+            </label>
+            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chaseStateHint')}>
+              <Checkbox checked={chaseStateOn}
+                onCheckedChange={(c) => { const v = !!c; setChaseStateOn(v); writeUiPref('opslog.chaseState', v ? '1' : '0'); }} />
+              {t('clu.chaseState')}
+            </label>
+            <label className="flex items-start gap-2 text-sm cursor-pointer">
+              <Checkbox checked={chaseGrids} className="mt-0.5"
+                onCheckedChange={(c) => { setChaseGrids(!!c); writeUiPref('opslog.chaseGrids', c ? '1' : '0'); SetChaseNewGrids(!!c).catch(() => {}); }} />
+              <span>{t('clu.chaseGrids')} <span className="text-xs text-muted-foreground">{t('clu.chaseGridsHint')}</span></span>
+            </label>
+            {chaseGrids && (
+              <p className="pl-6 text-xs text-muted-foreground">
+                {t('clu.chaseGridsStat', { n: gridStat?.known ?? 0, p: gridStat?.pending ?? 0 })}
+                {pskrStatus?.running ? ` · ${t('bo.feedUp', { n: pskrStatus.received ?? 0 })}` : ''}
+              </p>
+            )}
+
+            {/* What counts as "I already have this square". There is no single
+                right answer — a VUCC chaser counts a square per band, someone
+                filling a wall map counts it once — so it is a choice, and the
+                same six GridTracker offers, because a square wanted in one and
+                not the other is a bug report every time. */}
+            <div className="pl-6 space-y-1.5 pt-1">
+              <div className="flex items-center gap-2 flex-wrap">
+                <span className="text-xs text-muted-foreground w-28 shrink-0">{t('gsc.scope')}</span>
+                <Select value={gridScope.scope} onValueChange={(v) => saveGridScope({ ...gridScope, scope: v })}>
+                  <SelectTrigger className="h-7 w-64 text-xs"><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    {(gridScope.scopes ?? []).map((s: any) => (
+                      <SelectItem key={s.key} value={s.key}>{t(`gsc.scope_${s.key}`)}</SelectItem>
+                    ))}
+                  </SelectContent>
+                </Select>
+              </div>
+
+            </div>
+          </div>
+
+
+          {/* Chase new — its own option, NOT nested under grid chasing. Chasing
+              squares and chasing entities are different wants; they only share
+              the PSK Reporter feed, which either one brings up. */}
+          <div className="border-t border-border/60 pt-3 space-y-2">
+            <label className="flex items-start gap-2 text-sm cursor-pointer">
+              <Checkbox checked={chaseNew} className="mt-0.5"
+                onCheckedChange={(c) => { setChaseNew(!!c); SetChaseNew(!!c).catch(() => {}); }} />
+              <span>{t('chn.option')} <span className="text-xs text-muted-foreground">{t('chn.optionHelp')}</span></span>
+            </label>
+          </div>
+
+        </div>
+      </>
+    );
+  }
+
   function ClusterPanel() {
     const sorted = [...clusterServers].sort((a, b) => (a.sort_order ?? 0) - (b.sort_order ?? 0));
     // Written on every keystroke. This panel has no Save button, and a pair of
@@ -5431,107 +5566,6 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
             </div>
           </div>
 
-          <div className="border-t border-border/60 pt-3 space-y-2">
-            {/* Chase switches: off, the marker stops being TOLD, everywhere at
-                once — badge, colour, filter chip, reference column. A "new band
-                + new POTA" spot then reads NEW BAND alone. */}
-          {/* The GLOBAL hunt: every category (DXCC, band, mode, slot, prefix,
-              county, state, grid) judged as new-only or new-plus-unconfirmed,
-              against the confirmation sources the operator trusts. */}
-          <div className="rounded-lg border border-border p-3 space-y-2">
-            <div className="flex items-center gap-2">
-              <span className="text-xs text-muted-foreground w-28 shrink-0">{t('chg.mode')}</span>
-              <Select value={chaseCfg.mode} onValueChange={(v) => { const next = { ...chaseCfg, mode: v }; setChaseCfg(next); void SaveChaseSettings(next as any); }}>
-                <SelectTrigger className="h-7 w-64 text-xs"><SelectValue /></SelectTrigger>
-                <SelectContent>
-                  <SelectItem value="new">{t('gsc.huntNew')}</SelectItem>
-                  <SelectItem value="new_unconfirmed">{t('gsc.huntUnconf')}</SelectItem>
-                </SelectContent>
-              </Select>
-            </div>
-            {chaseCfg.mode === 'new_unconfirmed' && (
-              <div className="flex items-center gap-4 flex-wrap pl-2">
-                <span className="text-xs text-muted-foreground">{t('chg.sources')}</span>
-                {([['lotw', 'LoTW'], ['card', t('chg.card')], ['eqsl', 'eQSL'], ['qrz', 'QRZ.com']] as const).map(([k, label]) => (
-                  <label key={k} className="flex items-center gap-1.5 text-xs cursor-pointer">
-                    <Checkbox checked={chaseCfg.sources.includes(k)}
-                      onCheckedChange={(c) => {
-                        const sources = c ? [...chaseCfg.sources, k] : chaseCfg.sources.filter((x) => x !== k);
-                        const next = { ...chaseCfg, sources };
-                        setChaseCfg(next); void SaveChaseSettings(next as any);
-                      }} />
-                    {label}
-                  </label>
-                ))}
-              </div>
-            )}
-          </div>
-
-            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chasePotaHint')}>
-              <Checkbox checked={chasePotaOn}
-                onCheckedChange={(c) => { const v = !!c; setChasePotaOn(v); writeUiPref('opslog.chasePota', v ? '1' : '0'); }} />
-              {t('clu.chasePota')}
-            </label>
-            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chaseSotaHint')}>
-              <Checkbox checked={chaseSotaOn}
-                onCheckedChange={(c) => { const v = !!c; setChaseSotaOn(v); writeUiPref('opslog.chaseSota', v ? '1' : '0'); }} />
-              {t('clu.chaseSota')}
-            </label>
-            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chaseCountyHint')}>
-              <Checkbox checked={chaseCountyOn}
-                onCheckedChange={(c) => { const v = !!c; setChaseCountyOn(v); writeUiPref('opslog.chaseCounty', v ? '1' : '0'); }} />
-              {t('clu.chaseCounty')}
-            </label>
-            <label className="flex items-center gap-2 text-sm cursor-pointer" title={t('clu.chasePfxHint')}>
-              <Checkbox checked={chasePfxOn}
-                onCheckedChange={(c) => { const v = !!c; setChasePfxOn(v); writeUiPref('opslog.chasePfx', v ? '1' : '0'); }} />
-              {t('clu.chasePfx')}
-            </label>
-            <label className="flex items-start gap-2 text-sm cursor-pointer">
-              <Checkbox checked={chaseGrids} className="mt-0.5"
-                onCheckedChange={(c) => { setChaseGrids(!!c); writeUiPref('opslog.chaseGrids', c ? '1' : '0'); SetChaseNewGrids(!!c).catch(() => {}); }} />
-              <span>{t('clu.chaseGrids')} <span className="text-xs text-muted-foreground">{t('clu.chaseGridsHint')}</span></span>
-            </label>
-            {chaseGrids && (
-              <p className="pl-6 text-xs text-muted-foreground">
-                {t('clu.chaseGridsStat', { n: gridStat?.known ?? 0, p: gridStat?.pending ?? 0 })}
-                {pskrStatus?.running ? ` · ${t('bo.feedUp', { n: pskrStatus.received ?? 0 })}` : ''}
-              </p>
-            )}
-
-            {/* What counts as "I already have this square". There is no single
-                right answer — a VUCC chaser counts a square per band, someone
-                filling a wall map counts it once — so it is a choice, and the
-                same six GridTracker offers, because a square wanted in one and
-                not the other is a bug report every time. */}
-            <div className="pl-6 space-y-1.5 pt-1">
-              <div className="flex items-center gap-2 flex-wrap">
-                <span className="text-xs text-muted-foreground w-28 shrink-0">{t('gsc.scope')}</span>
-                <Select value={gridScope.scope} onValueChange={(v) => saveGridScope({ ...gridScope, scope: v })}>
-                  <SelectTrigger className="h-7 w-64 text-xs"><SelectValue /></SelectTrigger>
-                  <SelectContent>
-                    {(gridScope.scopes ?? []).map((s: any) => (
-                      <SelectItem key={s.key} value={s.key}>{t(`gsc.scope_${s.key}`)}</SelectItem>
-                    ))}
-                  </SelectContent>
-                </Select>
-              </div>
-
-            </div>
-          </div>
-
-
-          {/* Chase new — its own option, NOT nested under grid chasing. Chasing
-              squares and chasing entities are different wants; they only share
-              the PSK Reporter feed, which either one brings up. */}
-          <div className="border-t border-border/60 pt-3 space-y-2">
-            <label className="flex items-start gap-2 text-sm cursor-pointer">
-              <Checkbox checked={chaseNew} className="mt-0.5"
-                onCheckedChange={(c) => { setChaseNew(!!c); SetChaseNew(!!c).catch(() => {}); }} />
-              <span>{t('chn.option')} <span className="text-xs text-muted-foreground">{t('chn.optionHelp')}</span></span>
-            </label>
-          </div>
-
           {/* Band-opening watch. It lives HERE, with the cluster nodes, because
               switching it on adds two of them — the operator should see that
               happen where it happens rather than find nodes they did not add. */}
@@ -8036,6 +8070,7 @@ function SettingsModalImpl({ onClose, onSaved, initialSection, onMainPaneChanged
     'lists-modes':  ModesPanel,
     'lists-satellites': SatellitesPanel,
     cluster:        ClusterPanel,
+    dxhunter:       DXHunterPanel,
     udp:            UDPIntegrationsPanelWrapper,
     // Module-scope components, wrapped so their props can be passed. The nested
     // panels below go through PanelHost instead — which is what now lets either

frontend/src/lib/bandplan.ts

@@ -111,3 +111,26 @@ export function bandRange(band: string): [number, number] | undefined {
 export function bandSegments(band: string): Seg[] {
   return plan().segments[band] ?? [];
 }
+
+// bandForMHz maps a dial frequency (MHz) to its ADIF band, or '' when it falls
+// outside every known allocation.
+//
+// Lives here rather than in a panel because more than one place has to answer
+// the same question the same way: the entry form retunes on a typed frequency,
+// and the QSO editor has to keep band and frequency agreeing when one of them
+// is corrected. Kept in step with BandFromHz on the Go side.
+export function bandForMHz(mhz: number): string {
+  if (!mhz || isNaN(mhz)) return '';
+  const plan: [number, number, string][] = [
+    [1.8, 2.0, '160m'], [3.5, 4.0, '80m'], [5.06, 5.45, '60m'], [7.0, 7.3, '40m'],
+    [10.1, 10.15, '30m'], [14.0, 14.35, '20m'], [18.068, 18.168, '17m'], [21.0, 21.45, '15m'],
+    [24.89, 24.99, '12m'], [28.0, 29.7, '10m'], [50, 54, '6m'], [70, 71, '4m'],
+    [144, 148, '2m'], [222, 225, '1.25m'], [420, 450, '70cm'], [902, 928, '33cm'], [1240, 1300, '23cm'],
+    // Microwave, ADIF 3.1.7 ranges.
+    [2300, 2450, '13cm'], [3300, 3500, '9cm'], [5650, 5925, '6cm'], [10000, 10500, '3cm'],
+    [24000, 24250, '1.25cm'], [47000, 47200, '6mm'], [75500, 81000, '4mm'],
+    [119980, 123000, '2.5mm'], [134000, 149000, '2mm'], [241000, 250000, '1mm'],
+  ];
+  for (const [lo, hi, b] of plan) if (mhz >= lo && mhz <= hi) return b;
+  return '';
+}

frontend/src/lib/spotDisplay.ts

@@ -20,7 +20,7 @@ export type SpotDisplayOptions = {
   // keep being computed; only the telling stops, so ticking the box back on
   // needs no rescan.
   chasePota: boolean; chaseSota: boolean;
-  chaseCounty: boolean; chasePfx: boolean; chaseGrid: boolean;
+  chaseCounty: boolean; chasePfx: boolean; chaseGrid: boolean; chaseState: boolean;
 };
 
 // chasePota/chaseSota read the switches directly — for the places that show a
@@ -37,6 +37,9 @@ export function chaseCounty(): boolean {
 export function chasePfx(): boolean {
   try { return localStorage.getItem('opslog.chasePfx') !== '0'; } catch { return true; }
 }
+export function chaseState(): boolean {
+  try { return localStorage.getItem('opslog.chaseState') !== '0'; } catch { return true; }
+}
 // chaseGrid mirrors the backend "chase new grids" setting (Settings writes the
 // mirror on load and on toggle) so the display layer can gate NEW GRID without
 // an async round-trip per row.
@@ -44,6 +47,28 @@ export function chaseGrid(): boolean {
   try { return localStorage.getItem('opslog.chaseGrids') !== '0'; } catch { return true; }
 }
 
+// chaseAllows answers "does this operator chase this kind of thing at all?"
+// for the ORTHOGONAL markers — park, square, prefix, county.
+//
+// The switches were written for the cluster and stayed there, so an operator
+// who does not chase parks still met NEW POTA in the decode list and in Chase
+// new: the same badge, withdrawn on one screen and shouting on the next. The
+// setting is about what the operator hunts, not about which panel is open.
+//
+// The keys are both the status-entry field names (new_pota…) and the shorter
+// category names the panels filter with (pota…), so one call serves both.
+// Anything without a switch of its own — a new US state — is always allowed.
+export function chaseAllows(key: string): boolean {
+  switch (key) {
+    case 'new_pota': case 'pota': return chasePota();
+    case 'new_grid': case 'grid': return chaseGrid();
+    case 'new_pfx': case 'pfx': return chasePfx();
+    case 'new_county': case 'cty': return chaseCounty();
+    case 'new_state': case 'state': return chaseState();
+    default: return true;
+  }
+}
+
 // Both options are withdrawn from the filter panel for now. The machinery below
 // is deliberately kept whole — it is correct and hard-won — so putting the two
 // switches back is this one flag and the block they came from in App.tsx.
@@ -57,7 +82,7 @@ export function readSpotDisplayOptions(): SpotDisplayOptions {
   // The EXPOSED flag only withdraws the two original switches; the chase
   // switches are live regardless.
   if (!SPOT_DISPLAY_OPTIONS_EXPOSED) {
-    return { muteWorked: false, slotHighlight: false, chasePota: chasePota(), chaseSota: chaseSota(), chaseCounty: chaseCounty(), chasePfx: chasePfx(), chaseGrid: chaseGrid() };
+    return { muteWorked: false, slotHighlight: false, chasePota: chasePota(), chaseSota: chaseSota(), chaseCounty: chaseCounty(), chasePfx: chasePfx(), chaseGrid: chaseGrid(), chaseState: chaseState() };
   }
   try {
     return {
@@ -65,9 +90,10 @@ export function readSpotDisplayOptions(): SpotDisplayOptions {
       slotHighlight: localStorage.getItem('opslog.clusterSlotHighlight') === '1',
       chasePota: chasePota(), chaseSota: chaseSota(),
       chaseCounty: chaseCounty(), chasePfx: chasePfx(), chaseGrid: chaseGrid(),
+      chaseState: chaseState(),
     };
   } catch {
-    return { muteWorked: false, slotHighlight: false, chasePota: true, chaseSota: true, chaseCounty: true, chasePfx: true, chaseGrid: true };
+    return { muteWorked: false, slotHighlight: false, chasePota: true, chaseSota: true, chaseCounty: true, chasePfx: true, chaseGrid: true, chaseState: true };
   }
 }
 
@@ -79,6 +105,7 @@ type Entry = {
   new_pota?: boolean;
   new_pfx?: boolean;
   new_grid?: boolean;
+  new_state?: boolean;
 } | undefined;
 
 // applySpotDisplay rewrites a status entry per the options, so every consumer —
@@ -123,6 +150,9 @@ export function applySpotDisplay<T extends Entry>(s: T, o: SpotDisplayOptions):
   if (!o.chaseGrid && e.new_grid) {
     e = { ...e, new_grid: false } as NonNullable<T>;
   }
+  if (!o.chaseState && e.new_state) {
+    e = { ...e, new_state: false } as NonNullable<T>;
+  }
   return e;
 }
 

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.27.6';
+export const APP_VERSION = '0.27.8';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -1397,6 +1397,8 @@ export function UpdateQSOsFromQRZ(arg1:Array<number>):Promise<number>;
 
 export function UploadCallsign(arg1:string):Promise<string>;
 
+export function UploadFullLogHamQTH():Promise<void>;
+
 export function UploadQSOsManual(arg1:string,arg2:Array<number>):Promise<void>;
 
 export function WatchlistAdd(arg1:string,arg2:boolean):Promise<void>;

frontend/wailsjs/go/main/App.js

@@ -2730,6 +2730,10 @@ export function UploadCallsign(arg1) {
   return window['go']['main']['App']['UploadCallsign'](arg1);
 }
 
+export function UploadFullLogHamQTH() {
+  return window['go']['main']['App']['UploadFullLogHamQTH']();
+}
+
 export function UploadQSOsManual(arg1, arg2) {
   return window['go']['main']['App']['UploadQSOsManual'](arg1, arg2);
 }

frontend/wailsjs/go/models.ts

@@ -2298,6 +2298,7 @@ export namespace main {
 	    backend: string;
 	    omnirig_rig: number;
 	    omnirig_vfo: string;
+	    digi_as_usb: boolean;
 	    flex_host: string;
 	    flex_port: number;
 	    flex_spots: boolean;
@@ -2350,6 +2351,7 @@ export namespace main {
 	        this.backend = source["backend"];
 	        this.omnirig_rig = source["omnirig_rig"];
 	        this.omnirig_vfo = source["omnirig_vfo"];
+	        this.digi_as_usb = source["digi_as_usb"];
 	        this.flex_host = source["flex_host"];
 	        this.flex_port = source["flex_port"];
 	        this.flex_spots = source["flex_spots"];

internal/cat/cat.go

@@ -304,6 +304,14 @@ type SpotInfo struct {
 	BackgroundColor string
 	Comment         string
 	LifetimeSec     int // panadapter display seconds before auto-removal (0 = backend default)
+	// Priority is SmartSDR's own tie-breaker, 1 (highest) to 5.
+	//
+	// It matters because the panadapter has finite room: spots close in
+	// frequency are stacked behind a "+" and only one of them is drawn. The
+	// radio picks that one by priority — so an entity never worked can sit
+	// invisible behind three stations already in the log unless we say which
+	// is worth the space. 0 leaves the field off the command entirely.
+	Priority int
 }
 
 // Spotter is an OPTIONAL backend capability: show cluster spots on the radio

internal/cat/flex.go

@@ -1557,6 +1557,10 @@ func (f *Flex) SendSpot(s SpotInfo) error {
 	if hadOld {
 		f.send(fmt.Sprintf("spot remove %d", old))
 	}
+	prio := ""
+	if s.Priority >= 1 && s.Priority <= 5 {
+		prio = fmt.Sprintf(" priority=%d", s.Priority)
+	}
 	cmd := fmt.Sprintf("spot add rx_freq=%.6f callsign=%s color=%s source=OpsLog lifetime_seconds=%d trigger_action=Tune timestamp=%d",
 		float64(s.FreqHz)/1e6, call, color, life, time.Now().Unix())
 	// Convert to a real Flex mode (USB/LSB/CW/DIGU/…): SmartSDR only switches the
@@ -1575,6 +1579,7 @@ func (f *Flex) SendSpot(s SpotInfo) error {
 	if c := flexEncode(s.Comment); c != "" {
 		cmd += " comment=" + c
 	}
+	cmd += prio
 	seq := f.send(cmd)
 	if seq > 0 {
 		// Remember which call this add was for; the R<seq> response carries the

internal/cat/icomserial.go

@@ -1543,6 +1543,14 @@ func (b *IcomSerial) modeCode(mode string) (code byte, data bool, err error) {
 		return civ.ModeCW, false, nil
 	case "SSB":
 		return usb, false, nil
+	case "USB":
+		// The SIDEBAND, asked for by name. "SSB" resolves to whichever side the
+		// band convention wants, which is right for a logged mode and useless
+		// when the operator means "put this radio in USB" — on 40 m there was no
+		// way to say it at all, and the console's own button could not either.
+		return civ.ModeUSB, false, nil
+	case "LSB":
+		return civ.ModeLSB, false, nil
 	case "AM":
 		return civ.ModeAM, false, nil
 	case "FM":

internal/extsvc/hamqth.go

@@ -1,9 +1,13 @@
 package extsvc
 
 import (
+	"archive/tar"
+	"bytes"
+	"compress/gzip"
 	"context"
 	"fmt"
 	"io"
+	"mime/multipart"
 	"net/http"
 	"net/url"
 	"strings"
@@ -18,6 +22,20 @@ import (
 // duplicate…, reason in the body), 403 wrong credentials, 500 server error.
 const hamqthUploadURL = "https://www.hamqth.com/qso_realtime.php"
 
+// hamqthFullLogURL takes a WHOLE log as a file. Note "whole": HamQTH's own
+// documentation says "you always have to upload whole log. HamQTH doesn't
+// support partial upload" — the file REPLACES what is on the site. That is why
+// it is not the batch path for a selection, and why the caller must have said
+// so out loud before we get here.
+const hamqthFullLogURL = "https://www.hamqth.com/prg_log_upload.php"
+
+// hamqthMaxUpload is the documented ceiling for one upload.
+const hamqthMaxUpload = 20 << 20
+
+// hamqthCompressAbove is where a plain .adi stops being sent as text. Well
+// under the limit: the multipart envelope and the form fields ride along too.
+const hamqthCompressAbove = 12 << 20
+
 // hamqthLoginURL is the callbook session login — the one authenticated HamQTH
 // endpoint that cannot change anything in the log, which is what the settings
 // Test button must call.
@@ -92,6 +110,127 @@ func uploadHamQTHTo(ctx context.Context, client *http.Client, endpoint string, c
 	}
 }
 
+// UploadHamQTHFullLog replaces the account's log with the given ADIF.
+//
+// DESTRUCTIVE by design of the remote API, not by ours: everything on HamQTH
+// for this callsign that is not in this file stops existing. The caller owns
+// the confirmation.
+//
+// The file goes in the multipart field "f" (HamQTH's own curl example:
+// curl -F [email protected] -F send_log=OK -F u=… -F p=…). A large log is sent as a
+// tar.gz — one of the archive formats the site unpacks — because the ceiling is
+// 20 MB and a six-figure log passes it as plain text.
+func UploadHamQTHFullLog(ctx context.Context, client *http.Client, cfg ServiceConfig, adifText string) (UploadResult, error) {
+	user := strings.TrimSpace(cfg.Username)
+	switch {
+	case user == "":
+		return UploadResult{}, fmt.Errorf("hamqth: username not set")
+	case cfg.Password == "":
+		return UploadResult{}, fmt.Errorf("hamqth: password not set")
+	case strings.TrimSpace(adifText) == "":
+		return UploadResult{}, fmt.Errorf("hamqth: nothing to upload")
+	}
+
+	payload := []byte(adifText)
+	name := "opslog.adi"
+	if len(payload) > hamqthCompressAbove {
+		gz, err := tarGzADIF(payload)
+		if err != nil {
+			return UploadResult{}, fmt.Errorf("hamqth: compressing the log: %w", err)
+		}
+		payload, name = gz, "opslog.tar.gz"
+	}
+	if len(payload) > hamqthMaxUpload {
+		return UploadResult{}, fmt.Errorf("hamqth: the log is %d MB compressed, over HamQTH's %d MB limit",
+			len(payload)>>20, hamqthMaxUpload>>20)
+	}
+
+	var body bytes.Buffer
+	mw := multipart.NewWriter(&body)
+	_ = mw.WriteField("u", user)
+	_ = mw.WriteField("p", cfg.Password)
+	if c := strings.ToUpper(strings.TrimSpace(cfg.Callsign)); c != "" {
+		_ = mw.WriteField("c", c)
+	}
+	_ = mw.WriteField("send_log", "OK")
+	fw, err := mw.CreateFormFile("f", name)
+	if err != nil {
+		return UploadResult{}, err
+	}
+	if _, err := fw.Write(payload); err != nil {
+		return UploadResult{}, err
+	}
+	if err := mw.Close(); err != nil {
+		return UploadResult{}, err
+	}
+
+	req, err := http.NewRequestWithContext(ctx, http.MethodPost, hamqthFullLogURL, &body)
+	if err != nil {
+		return UploadResult{}, err
+	}
+	req.Header.Set("Content-Type", mw.FormDataContentType())
+	if client == nil {
+		// A whole log is a long POST on a slow uplink.
+		client = &http.Client{Timeout: 10 * time.Minute}
+	}
+	resp, err := client.Do(req)
+	if err != nil {
+		return UploadResult{}, err
+	}
+	defer resp.Body.Close()
+	raw, _ := io.ReadAll(io.LimitReader(resp.Body, 64<<10))
+	msg := strings.TrimSpace(string(raw))
+	if looksLikeHTML(msg) {
+		msg = ""
+	}
+	if resp.StatusCode != http.StatusOK {
+		if msg != "" && len(msg) < 300 {
+			return UploadResult{}, fmt.Errorf("hamqth: HTTP %d: %s", resp.StatusCode, msg)
+		}
+		return UploadResult{}, fmt.Errorf("hamqth: HTTP %d", resp.StatusCode)
+	}
+	// The site answers in prose, and only its own refusals are worth reading
+	// back: the ADIF itself is validated later, in the background, and any
+	// complaint about it reaches the operator by e-mail rather than here.
+	low := strings.ToLower(msg)
+	switch {
+	case strings.Contains(low, "successfully"):
+		return UploadResult{OK: true, Message: msg}, nil
+	case strings.Contains(low, "wrong username"), strings.Contains(low, "password"):
+		return UploadResult{}, fmt.Errorf("hamqth: %s", msg)
+	case strings.Contains(low, "cannot upload log for this callsign"):
+		return UploadResult{}, fmt.Errorf("hamqth: %s", msg)
+	case msg == "":
+		// HTTP 200 with nothing to say: taken as accepted, and said so.
+		return UploadResult{OK: true, Message: "uploaded (no reply text)"}, nil
+	default:
+		return UploadResult{OK: false, Message: msg}, nil
+	}
+}
+
+// tarGzADIF wraps the ADIF as log.adi inside a tar.gz — the archive must carry
+// a .adi/.adif member for HamQTH to find the log in it.
+func tarGzADIF(adif []byte) ([]byte, error) {
+	var out bytes.Buffer
+	gz := gzip.NewWriter(&out)
+	tw := tar.NewWriter(gz)
+	if err := tw.WriteHeader(&tar.Header{
+		Name: "opslog.adi", Mode: 0o644, Size: int64(len(adif)),
+	}); err != nil {
+		return nil, err
+	}
+	if _, err := tw.Write(adif); err != nil {
+		return nil, err
+	}
+	if err := tw.Close(); err != nil {
+		return nil, err
+	}
+	if err := gz.Close(); err != nil {
+		return nil, err
+	}
+	return out.Bytes(), nil
+}
+
 // TestHamQTH verifies the credentials against the callbook session login —
 // authenticated, and unable to touch the log.
 func TestHamQTH(ctx context.Context, client *http.Client, cfg ServiceConfig) (string, error) {

internal/qso/qso.go

@@ -995,6 +995,12 @@ var bulkEditableExtras = map[string]string{
 	"hamlog_sent_date": "APP_OPSLOG_HAMLOG_SENT_DATE",
 	"hamlog_rcvd":      "APP_HAMLOG_QSO_CFM",
 	"hamlog_rcvd_date": "APP_OPSLOG_HAMLOG_QSL_DATE",
+	// HamQTH, same story and SENT only — the site publishes no confirmations,
+	// so there is no received side to edit. Bulk-editable for the one case that
+	// matters: a log uploaded to HamQTH by hand, which OpsLog would otherwise
+	// offer to send all over again.
+	"hamqth_sent":      "APP_OPSLOG_HAMQTH_SENT",
+	"hamqth_sent_date": "APP_OPSLOG_HAMQTH_SENT_DATE",
 }
 
 // BulkExtraKey maps a frontend field id to its ADIF key in extras_json, or "".
@@ -1403,6 +1409,10 @@ var filterableExtras = map[string]string{
 	"hamlog_sent_date": "APP_OPSLOG_HAMLOG_SENT_DATE",
 	"hamlog_rcvd":      "APP_HAMLOG_QSO_CFM",
 	"hamlog_rcvd_date": "APP_OPSLOG_HAMLOG_QSL_DATE",
+	// HamQTH — sent only, and filterable for the question that precedes every
+	// backlog upload: "which contacts have never gone there".
+	"hamqth_sent":      "APP_OPSLOG_HAMQTH_SENT",
+	"hamqth_sent_date": "APP_OPSLOG_HAMQTH_SENT_DATE",
 }
 
 // FilterableFields returns the whitelist (for the frontend to build its field
@@ -2003,7 +2013,7 @@ type WorkedBefore struct {
 // at all about yesterday.
 type BandStatus struct {
 	Band   string `json:"band"`   // ADIF lowercase band, e.g. "20m"
-	Class  string `json:"class"`  // "PH" | "CW" | "DIG"
+	Class  string `json:"class"`  // "PH" | "CW" | "DIG", or a raw digital mode ("FT8", "RTTY"…)
 	Status string `json:"status"` // "call_c" | "call_w" | "dxcc_c" | "dxcc_w"
 	// Call is "", "w" (worked with this callsign) or "c" (confirmed with it).
 	Call string `json:"call,omitempty"`
@@ -2392,12 +2402,26 @@ func (r *Repo) WorkedBefore(ctx context.Context, callsign string, dxccHint int,
 			return wb, fmt.Errorf("scan band status: %w", err)
 		}
 		code := bandStatusCode(callW == 1, callC == 1, dxccConfirmed == 1)
-		k := cellKey{band: band, class: modeClass(mode)}
+		keys := []cellKey{{band: band, class: modeClass(mode)}}
+		// The DIGITAL row can be cycled through the individual modes in the UI —
+		// FT8, then FT4, then RTTY — so the same cell is also published under the
+		// raw mode name. The query already grouped by mode; only the collapse to
+		// a class threw that away, and re-asking the database for it would be a
+		// second scan to learn what we had just read.
+		//
+		// Digital only: PH and CW have nothing to cycle through, and publishing
+		// "SSB" beside "PH" would just double the payload.
+		if um := strings.ToUpper(mode); modeClass(mode) == "DIG" && um != "" {
+			keys = append(keys, cellKey{band: band, class: um})
+		}
+		for _, k := range keys {
 			if cur, ok := best[k]; !ok || code > cur {
 				best[k] = code
 			}
+		}
 		// Confirmed beats worked here too, and neither is ever erased by the
 		// entity: this is only ever about the callsign.
+		for _, k := range keys {
 			switch {
 			case callC == 1:
 				callByCell[k] = "c"
@@ -2405,6 +2429,7 @@ func (r *Repo) WorkedBefore(ctx context.Context, callsign string, dxccHint int,
 				callByCell[k] = "w"
 			}
 		}
+	}
 	statusRows.Close()
 	codeStr := bandStatusNames
 	for k, code := range best {

rxdefaults_test.go

@@ -0,0 +1,42 @@
+package main
+
+import (
+	"strings"
+	"testing"
+
+	"hamlog/internal/adif"
+	"hamlog/internal/qso"
+)
+
+// A contact that was not split still has a receive side, and the record
+// forwarded to another logger has to carry it: Log4OM reads BAND_RX.
+func TestFillRXDefaults(t *testing.T) {
+	hz := int64(14074000)
+	q := qso.QSO{Callsign: "F4BPO", Band: "20m", FreqHz: &hz}
+	fillRXDefaults(&q)
+	if q.BandRX != "20m" {
+		t.Errorf("BandRX = %q, want 20m", q.BandRX)
+	}
+	if q.FreqRXHz == nil || *q.FreqRXHz != hz {
+		t.Errorf("FreqRXHz = %v, want %d", q.FreqRXHz, hz)
+	}
+	// Assert on the RECORD another logger reads, not merely on the struct:
+	// both halves of the receive side have to reach it.
+	rec := strings.ToUpper(adif.SingleRecordADIF(q))
+	if !strings.Contains(rec, "<BAND_RX:3>20M") {
+		t.Errorf("BAND_RX missing from the forwarded record:\n%s", rec)
+	}
+	if !strings.Contains(rec, "<FREQ_RX:9>14.074000") {
+		t.Errorf("FREQ_RX missing from the forwarded record:\n%s", rec)
+	}
+}
+
+// A genuine split contact keeps what it was given.
+func TestFillRXDefaultsKeepsSplit(t *testing.T) {
+	tx, rx := int64(14195000), int64(14205000)
+	q := qso.QSO{Callsign: "F4BPO", Band: "20m", BandRX: "17m", FreqHz: &tx, FreqRXHz: &rx}
+	fillRXDefaults(&q)
+	if q.BandRX != "17m" || q.FreqRXHz == nil || *q.FreqRXHz != rx {
+		t.Errorf("split QSO was overwritten: band_rx=%q freq_rx=%v", q.BandRX, q.FreqRXHz)
+	}
+}

spotcolors.go

@@ -314,6 +314,30 @@ func bracket(s string) string {
 //
 // Read from the same cached palette as the colours — see spotColorFor — because
 // it is consulted on every spot from every cluster.
+// spotPriority ranks a spot for SmartSDR's own tie-breaker, 1 (highest) to 5.
+//
+// The panadapter has finite room: spots close in frequency are stacked behind a
+// "+" and only one of them is drawn. The radio chooses by priority — so an
+// entity never worked was disappearing behind three stations already in the
+// log, simply because OpsLog never said which was worth the space.
+//
+// The tiers are the operator's own: the entity never worked first, then the
+// pieces of one already worked (band, mode, slot), then the reference hunts
+// (POTA, SOTA, county, prefix), and everything else last. My own callsign rides
+// at the top with the first — it is how a multi-op sees where it already is.
+func spotPriority(status string) int {
+	switch status {
+	case "new", "my-call":
+		return 1
+	case "new-band-mode", "new-band", "new-mode", "new-slot":
+		return 2
+	case "new-pota", "new-sota", "new-county", "new-pfx":
+		return 3
+	default:
+		return 5
+	}
+}
+
 func (a *App) spotHidden(status string) bool {
 	a.spotColorsMu.Lock()
 	if a.spotColorsCache == nil {

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.27.6"
+	appVersion = "0.27.8"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.

unconfband_test.go

@@ -0,0 +1,74 @@
+package main
+
+import (
+	"testing"
+	"time"
+
+	"hamlog/internal/qso"
+)
+
+// The operator's report: South Africa worked on 15m FT8 but confirmed only by
+// eQSL/Club Log/QRZ, with the chase set to "new + unconfirmed" over LoTW and
+// paper QSL. The verdict must be NEW BAND — that is what the settings ask for —
+// and it must be flagged UNCONFIRMED, so the badge reads "worked, QSL missing"
+// rather than "never worked here".
+func TestUnconfirmedBandIsFlagged(t *testing.T) {
+	a := syncTestApp(t)
+	hz := int64(21074000)
+	add := func(call, band, mode string, lotw, eqsl string, dxcc int) {
+		q := qso.QSO{
+			Callsign: call, Band: band, Mode: mode,
+			QSODate: time.Now().UTC().Add(-48 * time.Hour),
+			FreqHz:  &hz, DXCC: &dxcc, Country: "South Africa",
+			LOTWRcvd: lotw, EQSLRcvd: eqsl,
+		}
+		if _, err := a.qso.Add(a.ctx, q); err != nil {
+			t.Fatalf("add %s: %v", call, err)
+		}
+	}
+	// 20m is LoTW-confirmed, so the ENTITY is confirmed…
+	add("ZS1AAA", "20m", "FT8", "Y", "Y", 462)
+	// …but every 15m contact is confirmed only by eQSL, which this operator
+	// does not count.
+	add("ZS6GAV", "15m", "FT8", "N", "Y", 462)
+	add("ZS4AW", "15m", "FT8", "N", "N", 462)
+
+	pred := qso.ConfirmSourcesPredicate([]string{"lotw", "card"})
+	all, err := a.qso.EntitySlotMapPred(a.ctx, func(_ string, dx int, _ string) int { return dx }, nil, "")
+	if err != nil {
+		t.Fatalf("all ledger: %v", err)
+	}
+	conf, err := a.qso.EntitySlotMapPred(a.ctx, func(_ string, dx int, _ string) int { return dx }, nil, pred)
+	if err != nil {
+		t.Fatalf("confirmed ledger: %v", err)
+	}
+
+	if _, ok := all[462]; !ok {
+		t.Fatal("the all-QSO ledger has no South Africa at all")
+	}
+	if _, ok := all[462].Bands["15m"]; !ok {
+		t.Error("all-QSO ledger: 15m missing — the dimming test can never fire")
+	}
+	if _, ok := all[462].Slots["15m"]["FT8"]; !ok {
+		t.Error("all-QSO ledger: 15m/FT8 slot missing")
+	}
+	c, ok := conf[462]
+	if !ok {
+		t.Fatal("confirmed ledger: South Africa missing — the 20m LoTW QSO should put it there")
+	}
+	if _, ok := c.Bands["15m"]; ok {
+		t.Error("confirmed ledger has 15m, but no 15m QSO is confirmed by LoTW or card")
+	}
+
+	// The two halves the UI shows.
+	status := spotEntityStatus(true, false, true, false, "FT8")
+	if status != "new-band" {
+		t.Errorf("status = %q, want new-band", status)
+	}
+	_, bAll := all[462].Bands["15m"]
+	_, mAll := all[462].Modes["FT8"]
+	_, sAll := all[462].Slots["15m"]["FT8"]
+	if got := spotEntityStatus(true, bAll, mAll, sAll, "FT8"); got != "worked" {
+		t.Errorf("all-ledger verdict = %q, want worked (→ the badge should be dimmed)", got)
+	}
+}

unconfrepro_test.go

@@ -0,0 +1,114 @@
+package main
+
+import (
+	"context"
+	"path/filepath"
+	"testing"
+	"time"
+
+	"hamlog/internal/db"
+	"hamlog/internal/dxcc"
+	"hamlog/internal/qso"
+	"hamlog/internal/settings"
+)
+
+// The operator's exact case, end to end through the real verdict path.
+//
+// South Africa is confirmed (LoTW) on 20m and worked-but-unconfirmed on 15m,
+// with the hunt set to "new + unconfirmed" over LoTW and paper QSL. A 15m FT8
+// decode must come back NEW BAND — that is what the settings ask — and carry
+// the UNCONFIRMED flag, which is what draws the badge as a missing QSL rather
+// than a band never worked.
+func TestClusterStatusFlagsUnconfirmedBand(t *testing.T) {
+	dir := t.TempDir()
+	conn, err := db.Open(filepath.Join(dir, "log.db"))
+	if err != nil {
+		t.Fatalf("open: %v", err)
+	}
+	t.Cleanup(func() { conn.Close() })
+
+	a := &App{ctx: context.Background(), qso: qso.NewRepo(conn), settings: settings.NewStore(conn)}
+	a.settingsScoped.Store(true)
+	if err := a.settings.Set(a.ctx, keyChaseMode, "new_unconfirmed"); err != nil {
+		t.Fatalf("set chase mode: %v", err)
+	}
+	if err := a.settings.Set(a.ctx, keyChaseConfirm, "lotw,card"); err != nil {
+		t.Fatalf("set chase sources: %v", err)
+	}
+
+	// The real prefix table, so ZS4AW resolves the way it does in the app.
+	a.dxcc = dxcc.NewManager(filepath.Join("build", "bin", "data"))
+	if err := a.dxcc.LoadFromDisk(); err != nil {
+		t.Skipf("cty.dat not available here: %v", err)
+	}
+
+	za := 462
+	add := func(call, band, mode, lotw string) {
+		hz := int64(21074000)
+		if _, err := a.qso.Add(a.ctx, qso.QSO{
+			Callsign: call, Band: band, Mode: mode, FreqHz: &hz,
+			QSODate: time.Now().UTC().Add(-72 * time.Hour),
+			DXCC:    &za, Country: "South Africa", LOTWRcvd: lotw,
+		}); err != nil {
+			t.Fatalf("add %s: %v", call, err)
+		}
+	}
+	add("ZS1AAA", "20m", "FT8", "Y") // the entity IS confirmed, elsewhere
+	add("ZS6GAV", "15m", "FT8", "N") // 15m worked, never confirmed
+	add("ZS4AW", "15m", "FT8", "N")
+
+	// A station of the entity that is NOT the one already worked on this slot:
+	// that case has a rule of its own, tested below.
+	got := a.ClusterSpotStatuses([]SpotQuery{{Call: "ZS9XX", Band: "15m", Mode: "FT8"}})
+	if len(got) != 1 {
+		t.Fatalf("got %d results", len(got))
+	}
+	if got[0].Status != "new-band" {
+		t.Fatalf("status = %q, want new-band", got[0].Status)
+	}
+	if !got[0].UnconfStatus {
+		t.Error("UnconfStatus is false — the badge draws solid, as if 15m had never been worked")
+	}
+}
+
+// The same station, already worked on the same band and mode, has nothing left
+// to give: working it again cannot turn a missing QSL into a confirmation. The
+// need belongs to the entity, not to that callsign, so the badge goes quiet on
+// it — and stays on every other station of the entity.
+func TestWorkedSameSlotDropsTheUnconfirmedBadge(t *testing.T) {
+	dir := t.TempDir()
+	conn, err := db.Open(filepath.Join(dir, "log.db"))
+	if err != nil {
+		t.Fatalf("open: %v", err)
+	}
+	t.Cleanup(func() { conn.Close() })
+
+	a := &App{ctx: context.Background(), qso: qso.NewRepo(conn), settings: settings.NewStore(conn)}
+	a.settingsScoped.Store(true)
+	_ = a.settings.Set(a.ctx, keyChaseMode, "new_unconfirmed")
+	_ = a.settings.Set(a.ctx, keyChaseConfirm, "lotw,card")
+	a.dxcc = dxcc.NewManager(filepath.Join("build", "bin", "data"))
+	if err := a.dxcc.LoadFromDisk(); err != nil {
+		t.Skipf("cty.dat not available here: %v", err)
+	}
+
+	hz := int64(10136000)
+	if _, err := a.qso.Add(a.ctx, qso.QSO{
+		Callsign: "TN8GD", Band: "30m", Mode: "FT8", FreqHz: &hz,
+		QSODate: time.Now().UTC().Add(-24 * time.Hour),
+	}); err != nil {
+		t.Fatalf("add: %v", err)
+	}
+
+	got := a.ClusterSpotStatuses([]SpotQuery{
+		{Call: "TN8GD", Band: "30m", Mode: "FT8"}, // the very station worked
+		{Call: "TN4XY", Band: "30m", Mode: "FT8"}, // another in the same entity
+	})
+	if got[0].Status == "new" || got[0].UnconfStatus {
+		t.Errorf("the worked station still advertises a need: status=%q unconf=%v",
+			got[0].Status, got[0].UnconfStatus)
+	}
+	if got[1].Status != "new" {
+		t.Errorf("another station in the entity lost its badge: status=%q", got[1].Status)
+	}
+}