rouggy
released this
2026-08-30 17:01:03 +07:00
| 12 commits to main since this release
Changelog
- chore: release v0.27.1
- revert(icom): drop Wake-on-LAN — the deck does not honour it
- fix(icom): the client pings too — the dropouts' likely root cause
- fix(wb): latest lookup wins the worked-before panel
- feat(icom): Wake-on-LAN for a deck that sleeps with its server
- fix(omnirig): a Yaesu in split tunes both VFOs to the spot
- fix(cluster): the FT8/FT4 watering holes exist on every band
- fix(icom): CI-V idles carry real sequence numbers
- debug(icom): say whether the split mode-align was accepted
- style(icom): the shared LED meters, and the sideband named
- fix(dvk): repair the auto-CQ trace mangled by the previous commit
- debug(dvk): trace the auto-CQ loop into the app log
- fix(icom): kill the leftover waveform in both command forms, and say so
- fix(dvk): a transiently blank mode no longer kills the auto-CQ loop
- fix(icom): needle inertia for the TX meters, and room for three digits
- feat(icom): the ATU can be taken out of line
- revert(icom): drop the PTT+split strip — MOX and SPLIT already live below
- fix(icom): send the leftover-waveform kill blind, at connect
- fix(icom): switch off a leftover waveform stream at first contact
- fix(icom): one sequence space for everything sent on the audio stream
- feat(icom): remove the console's spectrum scope
- fix(icom): the console PTT carries the microphone on a network station
- feat(icom): PTT and offset split at the operator's hand
- fix(audio): the Listen button works with the network stream as the source
- fix(icom): standby is not a fault — the quiet recovery needs prior CI-V
- fix(icom): the audio stream no longer depends on the speakers
- fix(audio): starting the monitor restarts a running one instead of refusing
- fix(icom): a disconnected radio says so, not 'use the USB sound card'
- fix(icom): the SUB dial is always shown, and split aligns the TX mode
- feat(icom): live microphone over the network — the last remote brick
- fix(audio): the network monitor needs no From-radio device
- feat(icom): the speaker choice appears beside the RX-audio option too
- feat(icom): a speaker toggle on the console itself
- feat(icom): listening to the network audio is a remembered choice
- feat(icom): phase 5 — the voice keyer plays to the radio over the LAN
- fix(icom): wait out the rig's session cleanup before redialling
- debug(icom): count the questions asked during a CI-V silence
- fix(icom): give up on the quiet CI-V stream after 15 s, not 30
- fix(icom): re-open the CI-V flow when the rig goes quiet mid-session
- debug(icom): the quiet detector watches CI-V DATA, not transport chatter
- fix(icom): create the audio manager before the CAT link comes up
- fix(icom): only forward-moving audio packets reach the sink
- fix(cw): Icom CI-V CW works over the network backend too
- fix(icom): the live radio names MY_RIG, and a manual take records it too
- fix(rec): a fresh take starts its clock at zero, not at the last take's total
- debug(icom): say what the CI-V stream was doing when it goes quiet
- fix(icom): the 7760 power meter interpolates between MEASURED anchors
- chore(icom): stop blaming a hijacker for every silent CI-V stream
- fix(icom): power in watts on the 7760, and Listening restarts clean
- fix(cat): the settings panel opens on the radio that is actually active
- feat(icom): a DATA button, native PSK, real watts — and the audio codec
- fix(icom): verify the data flag after a mode set, and correct it with 0x26
- fix(icom): fold the 7760's stereo RX stream down to the mono it plays as
- fix(icom): decode the network RX audio as what the rig actually sends
- fix(icom): the IC-7760's attenuator is the stepped 6/12/18 dB kind
- debug(icom): log the raw packets seen during a control handshake
- feat(icom): the IC-7760 joins the model list
- fix(elecraft): calibrate the S-meter, and stop the SWR spike lingering
Downloads