rouggy 500fe8bfec fix(cw): activate the Kenwood/Elecraft keyer engine when selected ...

The frontend engine loader had no "kenwood" case, so a saved engine of
"kenwood" fell through to the WinKeyer default — the Kenwood/Elecraft
CW-over-CAT engine never ran even though the setting showed it selected.

Also clarify the Kenwood data-mode comment: there is no single mode digit
right for both a K3 (DATA=MD6) and a TS-590SG (MD6=FSK), so data stays on
USB as the safe common base; a rig-specific DATA mode is a follow-up.

2026-08-04 17:59:30 +02:00

..

civ

fix: CI-V frames read at the wrong offset decoded as plausible frequencies

2026-07-30 14:05:30 +02:00

cat.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

flex_rxslice_test.go

feat: Flex stays on the RX slice in split

2026-07-30 23:03:29 +02:00

flex_split_test.go

fix: Bug showing split for flex while in different mode on same band

2026-07-10 15:59:32 +02:00

flex.go

fix: PGXL meters/auth/fan, TCI spots+click, PTT-over-CAT, CW <LOGQSO>

2026-08-04 15:55:10 +02:00

flexdiscover.go

feat: added versionning & About window

2026-06-16 19:36:56 +02:00

icom_silence_test.go

fix: Icom over LAN froze on the last frequency after WSJT-X released the rig

2026-07-28 22:24:32 +02:00

icomaudio.go

feat: added full support in USB (local) & ethernet (local or remote) of audio for Icom

2026-07-09 11:30:06 +02:00

icomnet.go

feat: follow the SUB VFO over OmniRig; distance column in the QSO grids

2026-07-26 23:36:56 +02:00

icomserial.go

chore: release v0.22.9

2026-08-02 06:40:10 +02:00

kenwood_cw.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

kenwood_loopback_test.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

kenwood_test.go

chore: release v0.23.3

2026-08-04 16:46:32 +02:00

kenwood.go

fix(cw): activate the Kenwood/Elecraft keyer engine when selected

2026-08-04 17:59:30 +02:00

log.go

fix: Kenwood split read from FR/FT when the status frame omits it

2026-07-30 16:50:06 +02:00

omnirig_activate32.go

chore: release v0.21.3

2026-07-26 16:57:19 +02:00

omnirig_elevation_test.go

chore: release v0.21.3

2026-07-26 16:57:19 +02:00

omnirig_vfo_test.go

fix: a cluster spot dragged the rig from SUB back to MAIN

2026-07-29 16:07:20 +02:00

omnirig.go

fix: a cluster spot dragged the rig from SUB back to MAIN

2026-07-29 16:07:20 +02:00

tci.go

fix: PGXL meters/auth/fan, TCI spots+click, PTT-over-CAT, CW <LOGQSO>

2026-08-04 15:55:10 +02:00

xiegu_test.go

fix: CI-V frames read at the wrong offset decoded as plausible frequencies

2026-07-30 14:05:30 +02:00

xiegu.go

fix: serial CAT keyed the radio on connect; Xiegu can key on RTS/DTR

2026-07-31 22:16:03 +02:00

yaesu_cw_test.go

fix: the FTDX10 refuses KY; — stop waiting on a status it will never send

2026-07-29 13:15:36 +02:00

yaesu_cw.go

docs: FTDX10 confirmed — no CAT keying, the serial DTR keyer is the way

2026-07-29 13:27:04 +02:00

yaesu_panel.go

fix: Yaesu mode commands always addressed the main receiver

2026-07-30 10:10:43 +02:00

yaesu_split_test.go

fix: the Yaesu power meter is not linear — calibrate it on three points

2026-07-29 14:11:25 +02:00

yaesu_test.go

fix: Yaesu mode commands always addressed the main receiver

2026-07-30 10:10:43 +02:00

yaesu.go

feat(cat): make the DTR/RTS lowering a setting

2026-08-01 19:25:04 +02:00