rouggy
13de53772b
docs: update README (EN+FR) — multiple amplifiers + ACOM, SmartSDR v4 DSP filters + DAX, native microHAM ARCO rotator (GS-232A LAN/USB), panadapter spot tunes freq+mode, NET Control drag&drop + Log everyone, automatic live status, digital-mode grouping option, Select all / filter-shows-all
2026-07-22 20:36:29 +02:00
rouggy
6b04072e52
fix: clicking an OpsLog spot on the Flex panadapter now sets the mode too — cluster spots get a mode inferred (comment/band plan) and SendSpot converts it to a real Flex mode (SSB->USB/LSB, FT8->DIGU), so SmartSDR actually switches mode on the click; changelog 0.20.10
2026-07-22 20:36:29 +02:00
rouggy
64b8ba7fdc
chore: release v0.20.9
2026-07-22 20:24:34 +02:00
rouggy
a9ca50b2dd
fix: the Flex panel DAX button now toggles the TRANSMIT-bar DAX (transmit set dax=), not the slice RX DAX channel — this is the button that routes TX audio through DAX (WSJT-X); state follows changes made in SmartSDR too
2026-07-22 20:24:25 +02:00
rouggy
512b5fd35b
feat: DAX selector on the Flex panel — routes the active slice's RX audio to a DAX channel (slice dax=0-8, Off..8 dropdown next to the antenna selection, highlighted when active); changelog updated
2026-07-22 17:33:45 +02:00
rouggy
77e3d011a0
ui: rebalance the Flex panel columns — RIT/XIT move to the bottom of the Transmit card, antenna RX/TX selection to the top of the Receive card (the Receive column had grown tall with the v4 DSP rows); changelog wording updated
2026-07-22 17:31:59 +02:00
rouggy
b7dd8d4852
feat: multiple amplifiers + SmartSDR v4 DSP filters
...
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1 ); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.
Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
2026-07-22 17:25:10 +02:00
rouggy
4c75680689
feat: day batch — upload results surfaced as toasts (silent LoTW failures from the right-click send looked like nothing was sent); live selection count + Select all/Unselect all toggle in the grid toolbar; active filters bypass the row limit (all matches shown, 10k safety cap); NET Control: same right-click menu on worked-before + drag&drop roster<->on-air (drop on roster logs the QSO); compact mode restores previous window size/position; advanced-filter field renamed Station callsign; optional DXCC-style digital-mode grouping (Settings->General) for matrix badges + cluster colouring; changelog 0.20.9 entries (version NOT bumped)
2026-07-22 15:38:08 +02:00
rouggy
5aac28f564
fix: PGXL status-bar chip and Station Control widget read OPERATE from the Flex when it reports the amp (the direct GSCP status doesn't carry operate state) — toggle then goes through FlexAmpOperate like the Flex panel; direct TCP link stays as fallback; log distinct raw PGXL status payloads to map unknown fields
2026-07-22 09:33:39 +02:00
rouggy
c91c8c3b47
feat: v0.20.8 — microHAM ARCO rotator native control (GS-232A over LAN TCP or USB serial, no PstRotator); amplifier OPERATE/STANDBY toggle on the status-bar chip for all three amps (PGXL direct operate command now wired + operate state parsed); PGXL operate button in the Station Control widget; NET Control auto-selects the next on-air station after logging and gains a 'Log everyone' button; changelog + version bump
2026-07-21 21:49:01 +02:00
rouggy
968da5488c
chore: release v0.20.8
2026-07-21 21:48:23 +02:00
rouggy
1b5b0c2e90
feat: clicking the status-bar amplifier chip toggles OPERATE <-> STANDBY (SPE/ACOM, optimistic flip reconciled by the poll; disabled offline) — PGXL still opens Settings, it has no standby command
2026-07-21 18:54:48 +02:00
rouggy
0385aed760
feat: amplifier controls without a Flex/Icom panel — Station Control widget (SPE/ACOM full control, PGXL fan) + status-bar chip (green OPERATE / orange STANDBY / red offline, click opens Settings); warn with a toast when activating a profile whose MySQL is unreachable instead of silently staying on the old logbook
2026-07-21 18:47:31 +02:00
rouggy
24a5a0480d
chore: release v0.20.7
2026-07-21 18:26:34 +02:00
rouggy
828f99b8ac
docs: add Discord server badge to the top of the README (EN/FR)
2026-07-21 17:15:18 +02:00
rouggy
9e5868b839
fix: raise MySQL pool 8->16 — 8 starved the instance's own live-sync polling (revision + grid refresh + live_status + chat), so the grid stopped showing other operators' QSOs; 16 avoids the stall and still fits ~15 ops under max_connections=300
2026-07-21 16:50:48 +02:00
rouggy
40d0ca57c3
diag: log slow QSO inserts (>2s) with call/band/mode; rotate the app log to .1 at 10MB instead of deleting it, so the previous session's diagnostics survive
2026-07-21 16:24:50 +02:00
rouggy
aa537f9eea
fix: log returns as soon as the QSO row is inserted; award_refs/recording/uploads/eQSL now run off the critical path (both manual and UDP) — a busy multi-op MySQL no longer freezes the entry form ~40s waiting on the award_refs UPDATE
2026-07-21 16:20:49 +02:00
rouggy
ea1bd2a66d
feat: sync the host CW keyer speed (wkWpm) to the FlexRadio's actual CW speed — including changes made on the radio/SmartSDR, not just the panel slider — so CW-length estimates (auto-call gap) match reality when using Flex CWX
2026-07-21 16:10:15 +02:00
rouggy
1f54656256
fix: <LOGQSO> logs immediately at its position instead of waiting the full CW-duration estimate first (buffered keyers keep sending; logging never interrupts them) — was delaying the log up to ~10s; only the final segment still waits, for auto-call timing
2026-07-21 16:01:15 +02:00
rouggy
54dd109288
docs: changelog entry for 0.20.7 (multi-op MySQL connection fix, By-Continent stats total)
2026-07-21 15:12:44 +02:00
rouggy
2c1d7235f0
fix: shrink MySQL connection pool (50->8) so a multi-op event doesn't exhaust the shared server's max_connections (Error 1040: Too many connections), which was silently failing the on-air widget/award_refs/grid reads and making the UI look frozen
2026-07-21 12:23:38 +02:00
rouggy
adf9844d1b
fix: stats By Continent donut totals now match the QSO count (bucket blank/unknown continents as 'Unknown' instead of dropping them; keep the Continents metric counting real continents only)
2026-07-21 12:10:00 +02:00
rouggy
7afe40a48e
chore: release v0.20.6
2026-07-21 11:57:20 +02:00
rouggy
311ea8341f
docs: changelog entry for 0.20.6 (amp card in Flex panel, faster CAT+MySQL startup, no lost QSOs, instant stations-on-air, LOGQSO position, relay fixes)
2026-07-21 11:51:51 +02:00
rouggy
a2958d458e
fix: 'stations on air' widget updates instantly after a QSO (UDP/FT8 path now emits qso:logged; publishLiveStatus emits livestatus:updated so the widget re-reads exactly when the shared row changes) — was lagging ~15-45s behind the ON-AIR badge
2026-07-21 11:32:16 +02:00
rouggy
d9b7e48e83
fix: UDP-logged QSOs fall back to the offline outbox on DB failure (were silently lost); speed up MySQL connect (batch migration checks into 1 query, connect direct-to-DB first) — was ~40s on a high-latency link
2026-07-21 11:18:36 +02:00
rouggy
3e9ebdb89a
fix: serialise UDP QSO logging (lookup+dedup+insert) so multi-stream MSHV (4 QSOs at once) queues instead of firing concurrent lookups/DB writes that got 'too many requests'
2026-07-21 11:09:43 +02:00
rouggy
be66ac1e19
fix: auto-call gap respected again (wkSend already waits for the send; runAutoCall no longer double-counts it, so a 4s gap is 4s not ~13s)
2026-07-21 10:26:28 +02:00
rouggy
6aab4a6989
fix: start CAT before the MySQL logbook connect — Flex/CAT no longer waits ~30s behind a slow remote-MySQL dial at launch
2026-07-21 10:26:27 +02:00
rouggy
9c62bf0152
fix: cleanly stop CAT (and release relay handles) on shutdown — FlexRadio kept our API client registered, making the next launch take ~30s to reconnect
2026-07-21 10:15:02 +02:00
rouggy
1630c8fdf4
feat: include band in the self-spot toast (Spotted by X on 20m with ...)
2026-07-21 10:08:11 +02:00
rouggy
408791ddf5
fix: <LOGQSO> now logs at its position in the macro (splits the macro there), and ESC/Stop before it completes cancels the pending log
2026-07-21 09:54:54 +02:00
rouggy
3de47a8825
fix: pin bottom status bar — root no longer shows a horizontal scrollbar that overlapped it in a small window
2026-07-21 09:49:49 +02:00
rouggy
880ecdbbb5
fix: cache relay-board drivers so Denkovi/USB-serial boards stay connected
...
The station-control code rebuilt a fresh driver on every status poll and every
relay set. Stateful boards (Denkovi FTDI D2XX, USB-serial) hold an OS handle only
one opener can own, so the first poll opened the board and leaked the handle, and
every poll after failed with 'device in use' — the relays greyed out a second
after Save and auto-control never switched. Drivers are now cached per device and
reused, closed on config change. Adds a Test-connection button + detect feedback
in the device editor (reported by VK4MA).
2026-07-21 09:31:08 +02:00
rouggy
615df0dc10
docs: update README (EN/FR) — SPE Expert amp, Station Control relays, Flex CWX keyer, statistics dashboard, What's new dialog
2026-07-21 09:24:28 +02:00
rouggy
2194279602
fix: drain SPE status backlog so display is current (was ~15s stale); ON now pulses DTR (0x0B is level-only); power-level cycle waits for real status change
2026-07-21 01:38:39 +02:00
rouggy
51c4bda71a
fix: SPE card shows 'SPE offline' instead of 'PowerGenius offline'
2026-07-21 01:31:38 +02:00
rouggy
7d7d175ede
feat: SPE amp ON/OFF buttons and Low/Mid/High power-level control (keystroke codes best-guess from APG, pending hw verification)
2026-07-21 01:25:55 +02:00
rouggy
be1ae76eb3
fix: correct SPE band-code map (00=160m,01=80m,02=60m...confirmed on hw); add output-power bar to SPE amp card
2026-07-21 01:19:24 +02:00
rouggy
50157a25d3
feat: show band on SPE amp card, spell out power level (Low/Mid/High), larger status text
2026-07-21 01:13:02 +02:00
rouggy
fe1a77a54d
fix: use official SPE band-code table from the manual (00=60m,01=160m,...)
2026-07-21 01:10:12 +02:00
rouggy
b818a2d947
fix: correct SPE status CSV field alignment (leading empty field shifts indices +1); decode band code; OPERATE/STANDBY now reflects real amp state
2026-07-21 01:09:13 +02:00
rouggy
5c4ae0cfd7
fix: put Mode Split By Band and By Mode side by side on the same row
2026-07-21 01:02:34 +02:00
rouggy
69635a15bc
refactor: remove redundant By Band chart, keep Mode Split By Band in its place
2026-07-21 00:59:25 +02:00
rouggy
78220e700f
fix: hide the entire Flex-reported amp card when PowerGenius is not the selected amp type
2026-07-21 00:57:16 +02:00
rouggy
42a6b9c76a
debug: log raw SPE status frame on change (to verify CSV field alignment on real hw)
2026-07-21 00:54:13 +02:00
rouggy
56affa4bed
feat: SPE Expert amplifier card in the Flex panel (OPERATE/STANDBY + live status)
...
When the configured amplifier is an SPE Expert (not the PowerGenius), the Flex
panel now shows an SPE control card — the Flex doesn't report SPE amps, so it's
driven by OpsLog's own SPE link. The PowerGenius fan-mode control is hidden when
the amp type isn't PowerGenius.
2026-07-21 00:49:48 +02:00
rouggy
aa5af4fc75
ui: EN/FR toggle in the What's-new dialog (defaults to UI language)
2026-07-21 00:36:39 +02:00
rouggy
46772e54fe
chore: check for updates every 5 minutes (was 10)
2026-07-21 00:32:19 +02:00
rouggy