A log sent to hamlog.online by hand — an ADIF exported from OpsLog and dropped
on their site — had no way of being marked as sent afterwards. The QSL Manager
then listed every one of those contacts as backlog and offered to upload them a
second time.
Both HAMLOG keys join the bulk-editable extras, so a selection (or the whole
log) can be stamped in one pass. They are DATES rather than Y/N flags because
that is the shape the sent stamp already uses: the QSL Manager's backlog asks
whether the key is present, and a date also says when it went.
The test pins that they are reachable through the extras path and NOT offered as
columns — a mapping claiming both would write to a table that has neither.
The upload targets in the QSO context menu gain HAMLOG.online, so a selection
goes there the same way it goes to QRZ or LoTW.
The confirmation toast now names the service from a map rather than a chain of
ternaries that stopped after three: hrdlog, eqsl and hamlog were echoed as their
internal ids, which is not what the operator clicked on.
An upload now leaves a trace on the QSO: APP_OPSLOG_HAMLOG_SENT holds the day
it went. The date rather than a Y, so a log says WHEN — and so one shape serves
three readers: eligibility (a stamped QSO is not sent twice), the QSL Manager's
backlog, and the appearance rules' sent channel.
HAMLOG joins the QSL Manager's service list. It has no status column to select
on, so its backlog is the ABSENCE of that extras key — a LIKE over the extras
JSON, which is a full scan and is the right trade here: it answers a button an
operator presses, and the alternative is a promoted column for a field no other
program would ever read. The match is on the quoted key, so a QSO whose comment
merely mentions the text is not taken for one already sent — which is what the
test pins.
HAMLOG.online is now reachable: Settings → External services → HAMLOG.ONLINE
takes the API key, the auto-upload switch and the timing, exactly like the six
services beside it, and a link opens the page where the key is issued.
The button next to it checks the KEY, not the connection. HAMLOG answers
KEYSTATUS with the callsign the key belongs to — something no other service
here offers — so the result reads "Key is valid — account F4BPO" rather than a
green tick. A key pasted from a club account or a second station is visible at
once, which is precisely the mistake a tick would have hidden.
No on-close timing, for the same reason as Cloudlog: there is no per-QSO upload
column to select a backlog from at shutdown, so the option would have done
nothing. Immediate or delayed, and a stored on_close falls back to immediate
rather than silently uploading nothing.
The appearance rules gain a HAMLOG.online channel too, so a row can be coloured
"confirmed" on that alone. It reads the ADIF extras — the standard names a field
for hamlog.EU and none for hamlog.ONLINE — using the same keys the award engine
reads, so the two can never disagree about what a confirmation is. "To send"
skips it: a QSO is either uploaded or not, there is no card to be owed.
HAMLOG.online is a seventh external service: one API key, one ADIF record per
QSO, immediate / delayed / on-close like the rest. They publish no API
documentation, so the protocol is read from THEIR OWN client — the HAMLOG Agent
(github.com/hamlogonline/Agent), which is the authoritative source short of
asking them:
POST https://hamlog.online/api/agent/
{"ADIFADD": {"APIKEY": k, "ADIFDATA": record}} → {"STATUS":"OK"}
{"KEYSTATUS": {"APIKEY": k}} → {"STATUS":"OK","CALLSIGN":…}
Success is STATUS == OK, not "no ERROR field": their failure carries ERROR and
no STATUS, and reading an unknown reply — a proxy page, a maintenance notice —
as an acceptance is how a contact goes missing without anyone noticing.
KEYSTATUS buys something no other service here offers: the key can be checked
BEFORE the first QSO, and the answer names the account. A key pasted from
another callsign is caught in the settings panel rather than through a week of
silent refusals.
Their confirmations are also an award source now, ticked like LoTW rather than
expressed through "custom". It reads the ADIF extras, not a column: the standard
names a field for hamlog.EU and none for hamlog.ONLINE, and borrowing the other
site's field would write a falsehood into every exported log. Three plausible
key names from their own export are accepted too, so nobody has to rename a
column by hand after an export.
Yaesu gains antenna selection (AN), remembered per band — the antenna picked on
a band comes back with it, with no table to fill in anywhere. Rigs with one
socket never answer AN and never show the row; the log says which case it is.
And a serial port that is refused now names its likely holder. OmniRig stays
resident once activated and keeps the port of the rig configured in it, so a
native backend never gets it — "Serial port busy" alone accused nobody, and an
FTDX10 spent a morning being blamed for it.
An Icom reached over the LAN streams its receive audio through the Icom
protocol, and Windows sees no sound card for it at all — the audio settings
could only offer the PC's own microphone, so "From radio" had nothing right to
point at and the QSO recorder had nothing to record. The recorder now accepts a
PUSHED source: the decoded stream goes to the speakers and to the recorder
alike, with no virtual cable to set up. Which source it uses follows the CAT
backend, and it is restarted only when that answer changes, so an ordinary
settings save never cuts a recording in half.
OmniRig no longer sends SetSimplexMode to a Yaesu when tuning. It is a silent
no-op on some — an FT-891 logged OK on every spot click while FreqA never
moved — and actively harmful on others. From an FT-2000 log, one QSY:
Vfo="AB"(0x80) Split=0x10000 (off) the operator's state
Vfo="BA"(0x100) Split=0x8000 (ON) after SetSimplexMode
The rig-agnostic "receive and transmit HERE, simplex" call turned split on and
moved reception to VFO B. OpsLog then displayed B — reading the radio correctly,
after having moved it itself. Icom is untouched: there the call is the
authoritative one and the direct write is unreliable.
Also:
- the NEW county badge shows in the entry form itself, inside the field,
where the operator is deciding whether to call.
- the basemap buttons clear the zoom controls; Light sat a few pixels from
the minus button and was being clicked by mistake.
- French cluster status: DÉJÀ CTC reads DÉJÀ QSO.
Panadapter spots are now worth reading. The comment carries the spotter, the
entity and the status in DXHunter's own shape — "CQ up 2 [F4BPO] [Franz Josef
Land] [New Slot]" — which needed two things nothing documents: SmartSDR splits
its command line on SPACES, so the words ran together until every space became
non-breaking; and it truncates past ~60 characters, so the cluster's own words
are trimmed first and the three brackets always survive. RBN column padding is
collapsed on the way in, or a preserved run of spaces opened a gap wide enough
to push the rest off screen.
"Already worked" means the CALLSIGN is in the log, not the entity: saying it of
a station never contacted was simply wrong. Each status can also be kept off the
panadapter entirely, and the WSJT-X decode spots obey the same switches — the
palette governs the panadapter, not one of the two things that feed it.
And the radio is no longer hammered: a spot whose frequency, colour and comment
are unchanged is not removed and redrawn. A busy skimmer feed re-spots the same
station every few seconds; one two-minute session sent 2128 adds, 88 of them for
a single callsign, and the display did not move a pixel for any of them.
CI-V, from an IC-7850 that kept killing JTDX: a reply the rig sent to another
controller on the same bus is no longer taken for ours, and a set_ptt, set_freq
or set_mode whose acknowledgement goes missing is verified by reading the rig
back instead of being reported as a failure. WSJT-X and JTDX answer a failed
command with a Rig Control Error and drop the link mid-over — 98 keyings, 6 lost
acknowledgements, 2 dropped connections in one session. The check waits 700 ms,
not the poll's 150: the rig has just failed to answer twice because it was
retuning, and a short probe would fail for the same reason.
Auto-call is withdrawn — it duplicated DXHunter, which already answers decodes,
and two programs deciding that from one shack key over each other. The library
is kept whole and dormant; a guard in App.tsx makes sure a stored preference
cannot key a transmitter whose switch no longer exists.
Also:
- the log rotates while running, not only at startup: the CI-V trace left on
wrote 416 MB and nothing would have stopped it before the disk did. Closing
it now releases the crash file too — the runtime keeps its own duplicate.
- the interface zoom announces itself, with a badge, a click back to 100% and
a View menu; Ctrl+wheel and Ctrl+0 always worked and nothing said so.
- no more elastic bounce, and no swipe-to-navigate out of the app.
- Edit QSO: your own TX power and the contacted station's extended locator
were saved and written back with no box to set them.
- FT decodes: continents are a multiple choice; a compound MSHV message that
answers two stations in one line is recognised as addressed to you.
Ultrabeam on a serial port never worked, and three faults were stacked so
each hid the next:
- Stop() did not wait for the poll loop, so a stopped client kept the COM
port. Every later client then failed with "Serial port busy" — the
program holding it being OpsLog itself.
- startUltrabeam tore the old client down CONCURRENTLY with starting the
new one, and "Test connection" built a second client on a port already
ours. Harmless over TCP, fatal on a port with one owner.
- A silent serial port returns (0, nil) and bufio retries that a hundred
times: a 4 s timeout became ~7 minutes of a frozen poll loop logging
nothing.
The controller then answered at once. Confirmed on hardware: the USB cable
presents TWO COM ports, only the second reaches the controller, and only at
19200 baud — so the speed is pinned in code (an FTDI cable opens at any
speed, and a wrong one is indistinguishable from a dead controller) and the
port field says which one to pick. The first exchange after each connect is
hex-dumped, which separates silence from a wrong baud from a misread frame.
Databases now carry only the tables their role needs. Every target used to
get the whole migration set, so a shared MySQL logbook grew settings and
station_profiles tables nothing ever wrote to — an operator inspecting the
server could not tell which copy was authoritative. Statements are filtered
by role, unknown tables are kept in both (fail-safe), and existing databases
are cleaned once, dropping only EMPTY tables. Settings → Database gains a
Compact button, since SQLite frees pages inside the file and never shrinks it.
Also:
- Awards: the callsigns behind a cell open the QSL Manager on Paper QSL,
searched, ready for the card dates.
- The record button no longer goes missing after an update: whether manual
recording is possible is a per-profile question that was asked once, at
startup, before the profile was known.
- Alert rules and filter presets confirm that they were saved.
- Spot clicks on the radio panadapter carry the POTA park into F3.
- The build gate is re-checked wherever the active callsign can change; it
ran at startup alone, and a fresh install has no callsign then.
The COM port was a bare text field — the only serial device in the app without
a port list, and typing one by hand gave no clue when it failed.
A Combobox rather than the Select the other devices use, deliberately: the port
of a USB adapter that is not plugged in does not appear in any list, and
refusing a typed value would mean the antenna cannot be configured until the
adapter is in. Detected ports are offered, anything else is still accepted, and
the value is trimmed and upper-cased on the way in.
The failure itself was already logged by the SteppIR client ("cannot open COM7
@ 4800 baud"); what was missing was the line above it not claiming the antenna
had connected. That is fixed separately.
Carries the 0.26.2 changelog entries for this and the three preceding commits —
one file, and splitting it four ways would have said less than this does.
The grid-square map drew the world two or three times across a wide window, each
copy carrying the same squares — worldCopyJump earns its keep on the great-circle
map, where a path reads better crossing a second Asia, and costs only confusion
on a map of where you have been heard. It is off here, the tiles no longer wrap,
and addBasemap takes the option so the other map is untouched.
Zooming out far enough to hold Greenland and Antarctica together was impossible:
the floor was zoom 1, and one step further out was already too far. Zoom 0 is
the whole planet, and the view now opens on a fitWorld computed from the
container rather than a guessed zoom level — repeated once when the container
first has a real size, because the tab is mounted hidden.
That exposed the next thing: Esri answers a request outside the world with a grey
"Map data not yet available" tile, and zoomed out that was most of the screen.
The tile layers carry a bounds, so those tiles are never asked for, and what is
left beside the planet is the panel's own background instead of a white slab.
Finally the mode filter offers All, Phone and CW beside Digital and FTx. The
backend already accepted all of them — GridSquares understands "ALL" and the
ModeClass names — only the interface was offering two.
Choosing "no field" cleared the primary field and hid the matching controls —
but the fallback OR rules stayed in the definition and went on scanning their
own fields. An RDA award declared to match nothing still found a district in the
QTH, and the panel no longer showed the rule doing it. Only a manual override on
the same QSO kept the wrong reference out of the log.
So the choice now clears the fallbacks too, which is what its label promises,
and a rule that survives — from an imported definition, a shared template — is
rendered even in "no field" mode. Nothing that still runs may be invisible.
No catalogue award pairs an empty field with OR rules, so nothing shipped
changes behaviour.
Three faults an operator's log finally made visible, plus the interface
work that came out of the same session.
Reliability:
- UDP events were dropped on backpressure without a word. A period hands
over twenty-odd decodes at once, and one slow write to the radio was
enough to fill the queue — so a decode simply never appeared, and the
only detector was the operator comparing the panel with JTDX. The drop
is now counted and logged, panadapter spots went to their own goroutine
so the radio can no longer hold the decode stream up, and the queue is
deep enough for a full period.
- The CAT manager waited for its poll loop with a bare <-done. A loop
wedged in a serial read then blocked every later restart inside Start,
before it could even try to connect: the rig stayed dead, no line was
written anywhere, and only killing the process recovered it. The wait
is bounded at ten seconds and says what it abandoned and why the next
connect may fail.
- Shutdown had no logging at all, so a hang left nothing to go on and a
process the operator had to kill — which then blocked the restart after
an update. Every step is logged, and a watchdog forces the exit if one
of them never returns.
Auto-call:
- A QSO in progress is now held by OpsLog itself rather than inferred
from the sender's Status. The moment WSJT-X/JTDX dropped the DX call or
the Enable-Tx flag between overs, the exchange looked finished and the
next CQ was answered, interleaving two and then three QSOs on one
slice. Released on log, on halt, on taking over, and by a watchdog.
Cluster console:
- Replies to a command were buried under the spot flood; a Replies
toggle hides the DX spots, which the list above already shows.
- Twelve named command buttons beside the input, configured in
Settings -> Cluster; a button with no command is not drawn.
- Following the tail is now an explicit switch, and sending a command
re-arms it. It used to measure "am I at the bottom" AFTER committing
the new lines, so a ten-line reply looked like the operator had
scrolled up and was never followed — the one case it exists for.
Awards:
- An award can name NO field. The matching controls disappear with it
and only hand-assigned references count, which is the only thing that
can feed a reference like WWBOTA. A test pins that nothing else is
scanned.
- WWBOTA added to the catalogue with its 31 342 references.
Elsewhere: the rotor widget's Stop button acknowledges the press like
the direction presets already did, and the docked band map can be
switched to fit-to-band from its own header.
STATION_CALLSIGN was the one field the option deliberately skipped, on the
grounds that stamping the active call could re-route a mixed-call log.
That protected nothing. The same option already writes this profile's grid,
rig, antenna, city and postal address onto every record it finds blank — it
has assumed "this log is mine" long before it reaches the callsign. And the
thing that actually keeps a multi-op log intact is that a record CARRYING a
station callsign is never touched, which has always been true and still is.
Withholding it only meant the option quietly failed on the one field an
operator goes and checks afterwards, leaving imported QSOs with no station
call at all — invisible in the ADIF they export, and unroutable for LoTW
and Club Log.
Counted and logged: "did it fill the callsign?" is the first question after
an import, and the log is where it gets answered.
Compared side by side, DXHunter's decode list is plainly easier to read,
and three things account for the gap.
The Call column repeated what the message already said. Every FT8 line
opens with the callsigns — "CQ A93MO LL56", "PG5FRL JH3CUL PM74" — so a
column in front of it printed the same token twice and pushed the line
everyone actually reads to the middle of the row. It is gone; the message
is the identity, and the tokens worth finding are picked out inside it:
green for CQ and for our own call when someone answers, red for the station
we are calling. The grid went with it, being the message's last token.
Time is on every row now, compact, no separators. A decode belongs to a
period and the section heading names it — but once a slot runs past a
screenful the heading is somewhere above, and an instant you cannot read
where the decode is is not an instant you have.
Band and mode became their own columns, band as a chip, and the status
flags moved into one column at the right edge with LoTW and a "worked"
marker beside them. Rows are tighter: 13 px for the message and the report,
11 px for the figures, 10 px for the badges, and the column rules run
through the lot.
It joins the left/right dropdowns in Settings -> General alongside the maps,
the cluster and the rest, so decodes can sit beside the entry strip instead
of only behind a tab. Per-profile like the other pane choices.
The panel itself is now built in ONE place and rendered from both: two
copies of that call would be two sets of props to keep in step, and the
click handler in particular is not something to duplicate.
The status refresh follows. Its "is anything showing a spot status?" test
decides whether a logged QSO refreshes the NEW badges now or only marks
them dirty, and a panel that had become a pane would have gone on wearing
stale badges whenever it was shown that way rather than as a tab.
A countdown for the T/R slot, against the UTC clock — a bar, the seconds
left, and the mode. Slots are anchored to UTC rather than to when OpsLog
started, so it is computed from the wall clock alone and keeps running when
the band is dead and there is nothing to group. The last fifth of a slot
turns amber: that is when a decode is imminent and an operator deciding
whether to answer has run out of time to think.
Which exposed a real fault in the grouping. Status reports the T/R period
as a whole number of seconds, so FT4 arrives as 7 or 8 depending on which
way the sender rounded, and the code floored to whole seconds on top of
that — two FT4 periods landed in one heading and others were split down the
middle. The slot length now comes from the MODE, which knows the exact
figure and the whole halving family (FT8 15, FT4 7.5, FT2 3.75), with the
sender's number only as a fallback; and the arithmetic is in milliseconds.
Sub-second slots get a decimal in their heading, or two FT4 periods inside
one second would print the same time twice.
Two rows now stand out from the band behind them, because they are not
about the band at all but about the QSO in progress:
- the station being called is red, taken from the transmit state, so it
can be found in a slot holding thirty others;
- anyone ANSWERING is green and labelled, which outranks everything else
on the screen. A reply is a decoded line that opens with our own
callsign — bracketed too, since a non-standard call comes back
compressed.
EY35S went on showing NEW SLOT for the rest of the half hour it stayed in
the list, five minutes after the QSO was in the log.
A decode's verdict is resolved once, when it arrives, and then read from
the shared status cache for ever. The cache IS refreshed after a QSO is
logged - but refreshSpotStatuses only ever re-queried the cluster spots, so
no decoded callsign was in the batch. And the decodes tab was not in the
"is anything showing a status?" test, so logging a QSO while looking at
this very panel only marked the cache dirty and waited for the cluster or
the band map to be opened.
Both fixed: decoded stations join the refresh batch, deduplicated by
call+band+mode so half an hour of a busy band is a few hundred queries the
backend answers with one pass of the log, and the tab counts as visible.
Second, worse bug found on the way. The cache is pruned back to the live
spots once it outgrows twice the spot cap - keeping only keys present in
the cluster list. Decodes share that cache and are exactly what pushes it
past the cap, so on a busy band the panel would have wiped every one of its
own badges the moment it filled up. Decoded stations now count as live.
Clicking a decode now ANSWERS it. It sends WSJT-X/MSHV a Reply message
(type 4), which is the same thing as double-clicking the line in their own
Band Activity window: the application looks the decode up, sets its
transmit frequency to the caller's and starts the exchange.
It deliberately does not tune the radio, which is what it did before and
why nothing happened. On FT8 the whole band sits inside one passband, so
moving the dial changes nothing about who gets answered - the decision
belongs to the decoding application, and the Reply is the only way to hand
it over. Tuning would also just fight it for the VFO. The entry is still
filled so the QSO can be logged here.
The reply is routed by PROGRAM ID, not by listener: two receivers can share
one multicast group, and answering a station heard on the 6 m instance by
talking to the 20 m one would start a call on the wrong band. It goes to
the address that instance's packets actually arrive from - a multicast
listener must answer the sender, never the group. WSJT-X matches the reply
against its own decode list, so the payload replays the decode field for
field: time, snr, delta time, audio offset, mode and message text.
Two columns added, DT and Freq - the audio offset inside the passband, not
the RF frequency, which is the same for every station in the list and says
nothing. Past about two seconds DT takes a warning tint: that station is
drifting out of the window.
The transmit strip. "You cannot see what you are sending, or who you are
calling" - two separate faults. The message was only ever threaded into its
period, and in FT8 you transmit in the slots you are NOT receiving in, so
its period had no decodes and the whole line was dropped; a transmit slot
now creates its period. And the state is a strip of its own at the top,
because it is the one thing on the screen that is about the operator rather
than the band. It is fed by every Status rather than only by one carrying
transmit text, so it can still name the station being called on MSHV and
older JTDX builds, which stop before tx_message in the Status payload.
"New only" became per-category badges, in the colours and the vocabulary of
the Chase New panel. None lit shows the whole band - this is a decode log
first, and a panel that opened by hiding most of the traffic would be lying
about what is on the air.
Three things from reading it on a real screen.
Column rules. The grid alone was not enough to follow a line across: cells
now carry a right border and the row stretches, so the rules run unbroken
from the header to the bottom of the list. That is what turns rows of text
into a table.
Left-aligned. The previous pass centred the grid inside a maximum width,
which on a wide screen opened a dead margin down the left before the first
callsign - trading the hole in the middle for a bigger one at the edge. Now
it fills the width and the slack lands in the message column, which is the
one that can use it and the one bounded by rules on both sides, so it reads
as a cell rather than a gap.
"CQ CQ PE1NAO JO32" - a green CQ badge in front of a message whose own
first word is CQ. The badge is gone; the word already in the line is picked
out instead, which scans the same and stutters not at all.
First pass on the panel from operating feedback.
Columns are a grid template shared by the header row and every data row, so
the two cannot drift and the eye has a rail to follow. It is capped at
1500 px and centred: free-flowing, a 2500 px window put the country a foot
from the callsign it belonged to and left a hole in the middle of every
line.
"New" gets a COLUMN. It was only a coloured edge before, which says
something is special without saying what — and every one of these is a
reason to break off what you are doing and call. The entity verdict is a
solid badge, the orthogonal ones (park, grid, prefix, county) are outlined
in the colours markerColour already gives the cluster list and the band
map, so a new park is the same green in all three. Applied inline because
those are categorical --chart-* custom properties, which the theme does not
expose as Tailwind colour utilities: written as border-chart-7 the badge
would simply have had no colour.
Band and mode selectors now appear only when the feed actually carries more
than one of each. One MSHV is one band and one mode, so for most operators
they were furniture; they show up the day a second instance puts a second
band on the link, which is the only day they mean anything. Same rule for
continent, and a receiver count when more than one instance is feeding.
Added a LoTW-only filter, and raised the type throughout (call and message
to 14 px, secondary to 12 px, badges to 11 px) with more room per row.
The decode payload now carries the sending application's own id. It tells
two receivers apart on one multicast group — and it is the address a
WSJT-X Reply message would have to go back to, so it is carried now rather
than requiring another trip through the parser later.
Every FTx decode WSJT-X, JTDX or MSHV puts on the wire, grouped by T/R
period. Optional and closable, from Tools -> FT decodes; its open state is
remembered, because an operator running digital modes leaves it open for
the session rather than consulting and closing it.
The period is the point, and what separates this from the cluster list.
FT8 is a sequence of fifteen-second slots and a band is read by watching
them go by: who called CQ this slot, who answered, what I was sending while
they did. A flat list sorted by time loses exactly that, so the list is
grouped one section per period, newest first, with the operator's own
transmission shown inside the slot it went out in.
Three fields had to be carried up from the wire to make it possible:
- the decode's OWN timestamp, which the parser read and threw away. It is
what assigns a slot: a period's decodes arrive in one burst a second or
two after it closes, so arrival time piles a whole period into the next
one. Rebuilt to UTC from milliseconds-since-midnight, with the
day-boundary case handled - a decode stamped 23:59:58 arriving at
00:00:01 would otherwise be dated a day ahead and sit at the top of the
list for the rest of the session.
- the decoded line itself. The exchange is what says where a station is in
a QSO, and no set of extracted fields reads like "R-09" does.
- tx_message and transmitting from Status, which nothing parsed before.
Recorded once per message rather than on every Status, which repeats it
about once a second for the whole over.
Also picked up on the way: is_new, low_confidence, off_air, the operator's
own call and grid, and the T/R period itself - better authority on slot
length than the mode name, which says nothing about a custom period. The
Status tail is read defensively: those fields were appended over successive
schema versions and JTDX and MSHV each stop at their own point, so a short
packet is normal and keeps whatever parsed.
Status flags come from ClusterSpotStatuses, the resolver the cluster list
and band map already use, filling the same cache. One verdict per call:
"new band" in this panel and plain worked in the cluster two seconds later
would be worse than no flag at all. Clicking a call goes through the same
handler as a cluster spot, so answering a station is one gesture whether it
came off telnet or off the receiver.
Filters: CQ only, new-anything only, band, mode, continent, an SNR floor
and a free search. The band, mode and continent choices are built from what
is actually on the feed - offering 160 m to a station whose receivers are
all on 6 m is noise.
Decodes are held in the frontend and pruned to a rolling half hour: they
are a live view, not data, nothing outside the panel reads them, and a
night of FT8 on 20 m would otherwise grow a list no filter can rescue.
Arrivals are staged on a 300 ms timer so a period landing as fifty packets
costs one status lookup and one render.
The PH/CW/DIG grid in the Stats panel is the fastest read in the app and its
palette was fixed per theme. Settings -> Appearance now offers the six: the
four status fills, the never-worked fill, and the ring on the cell being
entered.
Stored as OVERRIDES, not as a palette. Each of the twelve themes ships an
--mx-* ramp tuned to its own background, so an operator who only wants a
different green must not thereby freeze the other four to the theme they
happened to be using that day. An empty value means "whatever the theme
says"; the chosen ones are stamped inline on <html>, where they win over
every theme; switching the feature off hands the colours straight back.
The pickers are seeded from what the matrix is painting at that moment
rather than from a fixed palette, so the choice starts from the colours in
front of the operator. A new --mx-cur token carries the current-entry ring:
it follows --warning by default, so it stays theme-correct on all twelve,
but can be recoloured without dragging every other warning in the app along.
The legend under the matrix and its cell tooltips were hardcoded English.
They now go through t() with the same keys as the pickers, so the grid and
the settings cannot disagree about which green is which.
HTTPS to a relay board could not work. Nearly every board that offers it signs
its own certificate — there is no authority anywhere that could have signed it —
so the request failed verification before it left.
A checkbox, per board, off by default. Not a blanket switch, because the other
HTTPS case is real and opposite: a board reached from outside through a proxy
with a genuine certificate, where verification is the only thing standing
between an antenna switch and the internet. Same setting, two boards, different
answers.
Off by default is only safe if the failure explains itself, so a certificate
error now names the box to tick. Go's own "x509: certificate signed by unknown
authority" is accurate and tells an operator nothing about what to do next.
Shown only once an https:// URL is actually in the board's configuration. A
board on plain HTTP has no certificate to argue about, and an option that cannot
matter yet is one more thing to wonder about.
The flag joins the driver cache key: ticking it has to rebuild the driver, or
the cached one would go on refusing the certificate with the verifying client it
already holds.
The boards that take a bare host — WebSwitch, KMTronic — keep verification. An
https:// typed there is the proxy case by construction, since they default to
plain HTTP on the LAN.
Three tests against a real self-signed TLS server: accepted with the box,
refused with a message naming it without the box, and one board's setting not
leaking into another's.
Opening Station Control left the compass blank for a second or two while the
amplifiers, relay boards and power supply filled at once.
Nothing was slow. The status bar keeps the shared heading loop running, so when
the compass mounts there is already a tick pending — up to the full three-second
idle interval away — and the new subscriber simply waited out the rest of it.
The heading was known the whole time and had nowhere to be read from.
The last heading is now kept and handed to whoever subscribes next. That matters
more on the Alpha SPID this was reported on than it would elsewhere: every poll
is an open, a read at 600 baud and a close, so even fetching immediately on
mount would not have been immediate.
In a microtask, so a subscriber is never called back before subscribeRotorHeading
has returned to it.
The one field the editor would not let you touch, and the one that was wrong on
WAJA. Every other property of a reference — its name, pattern, entity list,
validity window — was editable; the code was rendered readOnly, so correcting a
number meant deleting all 47 references and importing a new list, throwing away
anything the operator had adjusted in it.
A rename in the store, not a delete plus an insert: everything the reference
carries travels with it, which is the whole point of correcting a number rather
than replacing an entry. A number already in use is refused — REPLACE INTO would
have let one reference silently swallow another, discovered much later as a
prefecture quietly missing from the list.
The typed code is held apart from the selection. The list and every field patch
key off the selected code, so editing it in place made the editor lose the
reference mid-edit.
SaveAwardReference now recomputes the log like Delete and Replace already did. A
reference's name is what the award column SHOWS for awards displaying by name,
and its pattern is part of what matches at all — so editing one changes rows,
and the grid was left showing the old label until something else happened to
trigger a pass.
Changelog: the three TCI-sharing lines are merged into one. The server and the
two fixes made to it while building are one unreleased feature, and an operator
only ever meets the finished thing. The TCI-client PTT line stays separate — it
is OpsLog driving a SunSDR, the other direction entirely.
Wanted for the case where the answers are moving: an operator correcting their
own QRZ record, or chasing a DXpedition whose page changes during the operation,
otherwise waits out thirty days before OpsLog will ask again. Clearing the cache
by hand works once; this is the setting for a whole session.
Nothing is read from it and nothing is written to it — rows stored while it is
off would only sit there going stale, waiting for the day it comes back on.
Switching off is NOT clearing: what it already holds stays, and the Clear cache
button remains the way to throw that away.
Two distinctions the code now has to keep, both load-bearing:
An EXPLICIT stored zero is off; an ABSENT key is the thirty-day default. Every
operator who has never opened this setting has nothing stored, and reading that
blank as a zero would silently switch the cache off for all of them.
The CONSTRUCTOR's zero is still the default, not off. At startup the settings
have not been read yet, and beginning with no cache would hammer the provider
for the first seconds of every launch. Only SetTTL, called once the operator's
settings are known, can switch it off.
A negative lifetime is meaningless and is ignored rather than rounded into
either meaning.
The input had to change too: it derived its value from the stored number on
every keystroke, so the box could not be emptied — and 0 was unreachable
outright, since parseInt('0') || 30 is 30.
internal/rigctld exists because Windows gives a COM port to ONE process: the
moment OpsLog talks to the radio natively, nothing else can. It answers the
programs that speak Hamlib NET rigctl. This answers the ones built around Expert
Electronics' TCI instead — and it answers them whatever radio is connected,
because it sits on the same backend-agnostic Rig interface. An operator with an
Icom or a Yaesu can now hand a TCI-only program a working rig.
One server or the other, never both. They answer the same questions about the
same radio, nothing speaks both, and a second listener is only a second thing to
go wrong.
Written against the official TCI Protocol document (ExpertSDR3/TCI, 12 January
2024, MIT — downloaded and read, not recalled): the initialisation set of §4.1
in its documented order, and the argument order of every command from §4.2. A
client will not proceed past connect without that block, which is why it is
written out in full rather than stubbed.
The one dangerous detail is the VFO mapping. TCI's channel A is where you
LISTEN and channel B where you transmit — the opposite way round from OpsLog's
RigState, which follows ADIF. Getting that backwards would put a station on the
DX's own frequency, so it is pinned in both directions by a test, and RxFreq was
added to the adapter rather than inferred.
Writing channel B while the rig is simplex is ignored: the client asked to
prepare a split transmit frequency, not to QSY, and a logger doing that on every
spot click would drag the operator off the station they were listening to. A
backend that cannot split still refuses out loud.
Only changes are pushed. TCI clients redraw on each command, so re-sending an
unchanged frequency four times a second makes a VFO readout flicker and fights
the operator's own tuning.
Nine tests, no socket needed — the protocol is the decision, not the transport.
The three layers underneath were already there and unreachable: the change-log
format (7d664bd), the identity column (724e68b) and the no-backfill decision
(c48294b). This is the wiring that gives the operator a switch.
Settings, all profile-scoped, because each profile can point at its own logbook:
the folder, this PC's name, the machine id minted once from it, the per-peer read
offsets and the tie-break counter. Scoping the machine id is what keeps two
profiles sharing one folder from writing two logbooks into one file.
Three hooks. Add and update publish asynchronously, down with the rest of the
after-the-fact work — a folder on a network share can block for seconds and a
contact belongs on screen long before another machine hears about it. Deletion
publishes SYNCHRONOUSLY and BEFORE the row goes, for the same reason
deleteRemoteCopies does: once it is gone its identity is gone with it and the
tombstone names nothing.
The apply path uses the repository directly and never AddQSO/UpdateQSO/DeleteQSO
— those publish, and a change applied here would be written straight back out,
two machines echoing each other for ever.
Saving writes a probe file to the chosen folder rather than asking whether it
exists. A read-only cloud folder, or a share whose credentials expired, exists
perfectly well and would swallow every contact in silence; if the probe fails the
switch goes back off instead of sitting on while nothing is written.
The panel is mostly status, and deliberately: every part of this runs on another
machine and on a sync client OpsLog cannot see, so "it is not working" has to be
answerable from the settings page — which PCs are in the folder, when each last
logged, what is waiting unread.
Four tests on the apply path, the middle two being the ones that matter: an edit
made on the other PC lands on the copy already here, matched on the contact
itself, instead of becoming a second row — that is what makes the no-backfill
decision safe — and a contact with the same station on another band stays a
separate contact.
withIOTARef was applied inside fillFromLastQso, the backfill that runs when the
provider came up short. That function returns early when there is no previous
contact with the callsign — so the island reference appeared for stations
already worked and never for the new one calling from the island, which is the
entire point of reading QRZ's <iota>.
Moved to the provider result in runLookup, where the rest of the callbook fields
are applied. The precedence is unchanged: a reference the operator typed or
picked still wins over the callbook.
Reported on F5IRH, Le Palais, Belle-Île-en-Mer — EU-048 in the QRZ record, and
nothing on the IOTA award.
No changelog line: the feature has not shipped yet, so the entry already in the
0.25.7 block now describes what it does.
The four buttons on the left change WHICH settings database is in use; the two
on the right act on the file already there. Splitting them by that line makes
the row read as two groups instead of six equal choices, and it stops the pair
wrapping to a ragged second line under the others.
ml-auto rather than a second container, so they still wrap gracefully when the
panel is narrow.
Also removed: "OpsLog can copy the SQLite database to a folder of your choice
when you close it, once per day. Rotation keeps the last N copies…" — everyone
knows what a backup is, and the controls underneath say the same thing in their
own labels. Gone from both dictionaries, and the bilingual test passes.
Text only — every feature stays exactly as it was.
gen.mwDesc what a Most Wanted rank is
bk.hintMysql what the on-close backup does with a MySQL logbook
db.profileHint that the logbook follows the active profile
db.mysqlHint that several OpsLogs on one MySQL see each other live
They explained things an operator already knows, in a settings panel that has
plenty to read as it is. The backup header keeps its ordinary hint; only the
longer MySQL variant goes.
Each removed from BOTH dictionaries: a string left in one and dropped from the
other shows the bare key in the other language, which is what
TestEveryStringIsInBothLanguages exists to catch — and it passes.
QRZ's XML carries <iota>EU-048</iota> for an operator on an island, and OpsLog
read past it. Wired end to end: the provider, the lookup cache (a column, like
web and zip before it), and the entry's award references.
It matters more here than the same field would for another award. There is no
live "who is on an island right now" feed anywhere — POTA has one and that is
what OpsLog matches spots against; SOTA has one behind conditions; IOTA
publishes only static lists. So the callbook record is the practical source, and
it is known BEFORE the contact is logged, which is when a reference is useful.
The reference goes in as an IOTA award reference, exactly as one picked by hand,
so the existing path carries it to the qso.iota column on save.
Two limits, both deliberate. A reference the operator typed or picked WINS: a
callbook entry can be years out of date, and the operator in front of the radio
has just been told where the station is. And the value must look like an IOTA
reference — two letters, a hyphen, three digits — because writing anything else
into the award makes a reference no list contains, which counts for nothing and
has to be found by hand later.
Two faults behind one screenshot: 3Y0K, recorded in the log as Bouvet Island,
showing the Antarctica matrix.
SELECTING A QSO now shows what that QSO records. The panel asked WorkedBefore
with no DXCC hint, and a hint of zero makes the backend resolve the entity from
cty.dat and the ClubLog exceptions AS THEY ARE TODAY — right for a live contact,
wrong for one being looked at in the log. The repo's own "infer from past QSOs"
path never ran, because the hint was no longer zero by the time it got there.
Hence Antarctica, and "5 QSOs with this entity" against "11 with this call":
two different entities, one of them nobody had asked about. The selected row's
dxcc now travels with it and is passed as the hint.
Browsing the log shows what the log says, even where the log is wrong.
Correcting an entity stays a deliberate act — right-click, Update from ClubLog.
BACK-ENTERING A QSO now resolves the exception at the CONTACT'S date. An
exception carries a validity window and a DXpedition's window closes: 3Y0K typed
months later, with the activation's own date in the form, was resolved against
today, matched nothing, and fell back to cty.dat. Both callers pass the date
they already hold — the entry strip's, and in the editor the record's own.
The date is trusted to move the resolution BACKWARDS only. A half-typed
"2026-0" must not send the lookup to the year 20, and a mistyped future date
must not resolve against a window that has not opened; both fall back to now.
Midday rather than midnight, because a window given in whole days is inclusive
of its end date and 00:00 sits exactly on the boundary.
Reported from a photograph of a French screen: "Spot lifetime" and "Chase new
grids" still in English in the DX Cluster settings. Diffing the two dictionaries
turned up fifteen more — including the ENTIRE update panel, which is why an
operator who reads French had nothing in French to react to when a new version
appeared.
All seventeen translated. Both dictionaries now hold 2685 keys with no
difference either way.
Every user-visible string ships in both languages: that was a rule, and until
now only a rule. A test parses the two dictionary literals and compares their
keys, so the next one is caught by `go test` instead of by an operator
photographing their own screen. Verified it fails when a key is removed.
A key missing from one side is not a blank — it falls back to the key itself,
so the interface reads "clu.spotTtl" where a label belongs, or keeps the English
text, which looks deliberate and is not.
"In this award's scope but with no reference" needs a scope to be in. On a
worldwide reference award — POTA, SOTA, IOTA, WWFF — every contact anywhere
would qualify, so the backend returns nothing and the window says it found
nothing. The button was there regardless, and could only ever open that.
It now appears only for an award scoped to a DXCC entity, which is what the
help text underneath used to have to explain. Better than what I did first,
which was to make a useless screen fast.
Kept from that: the assign dropdown is searched rather than scrolled above 300
references, and the reference list is not fetched until there are rows to
assign it to. Both still bite on a scoped award with a long list — Russian
districts, the bigger European ones.
Reported as POTA: missing references, and it hangs.
The Missing-refs modal builds a dropdown of every reference the award has, one
menu item each. A POTA log with the park list imported holds tens of thousands
of them, and putting that many items in the DOM stops the window answering.
Russian districts and the bigger European lists are the same shape.
Two things, and the second is the sharper one.
The list is now searched rather than scrolled: above 300 references a filter box
appears beside the dropdown, and the menu renders at most that many, saying how
many it is holding back. Nobody scrolls to K-4521 — they type it.
And the modal no longer fetches the references at all until there is something
to assign them to. Missing-reference detection needs a DXCC scope, so a
worldwide award like POTA always has zero rows here and the modal says so — it
was loading every park behind that message, for a dropdown that could not be
used for anything. The freeze happened on a screen with nothing to offer.
Whether this is the freeze that was reported I cannot say from here; it is a
freeze on exactly that screen, for exactly that award.
A field log showed three pulls of the same 123 615 QSOs inside ten seconds, the
Go heap going 725 MB → 2213 MB → 2539 MB. It is released after the idle TTL, so
not a leak — just the same work done three times with all three results alive at
once.
The cache lock was released before the logbook was read, so every caller that
arrived during a build missed the cache and started its own. Opening the Awards
panel does exactly that. One builder at a time now, with the usual re-check
after taking the lock: the second and third caller wait out the seconds they
were going to spend anyway, minus two round trips to the database.
The slice is also sized from the previous build. Growing to 123 000 structs by
doubling copies the whole thing a dozen times and holds the old and the new
array together at each step, on the largest object OpsLog keeps.
Also, the settings panel registry. The hook trap that broke the window when the
power-supply panel was opened was headed off by a comment, and the comment did
not survive contact with the next panel — so it is now structural. PanelHost is
a module-scope component that calls the selected panel and is keyed by section:
hooks inside a panel land in a component context that persists, section changes
remount it so each gets a fresh and consistent hook list, and no panel state
leaks into the next.
Rendering the panels as <Panel /> instead — the obvious refactor — would have
been wrong: they are nested inside SettingsModal and close over its state, so
each parent render makes a new component TYPE and React would unmount and
remount the panel on every keystroke.
rouggy