flex-wrap with fixed-width cards started each new row below the TALLEST card of
the previous row, leaving big gaps under short panels (e.g. the amplifier alone
on a second line). Switch the dashboard to balanced CSS columns (column-width
430px, break-inside-avoid): cards flow top-to-bottom and pack tightly by height.
"Auto" fits as many columns as the window allows; 1-4 cap the column count via
the container max-width. Grip-drag reorder unchanged. Changelog 0.21.1.
GroupCard was defined inside ExportFieldsDialog, so it got a new component
identity every render and React remounted the whole grid on each sel change,
making the per-group All/None buttons (and checkboxes) feel unresponsive. Hoist
GroupCard to module scope with sel + handlers passed as props. Changelog 0.21.1.
Per feedback: New/Open/Rename/Save-copy/Reset made no sense under the settings
database — moved the meaningful DB actions to the logbook (New database / Open
existing / Rename-relocate). The settings section now shows just its path + Open
folder. Also fixed the "Logbook switched…" confirmation rendering twice (dropped
the duplicate render in the SQLite block; kept the shared one). The unused
settings-db handlers/bindings stay for a later re-add.
"Choose a dedicated file" points at a fresh/empty file; there was no way to
rename or move an existing logbook WITH its data. RenameLogbook VACUUM INTOs the
active profile's SQLite logbook to a new path, repoints the profile and switches
the live logbook (no restart). Deletes the old file only when it was a dedicated
per-profile file; the shared default logbook.db is left for other profiles.
Errors on a MySQL logbook. UI: "Rename / relocate…" button in the logbook section.
Design flaw: opslog.db held BOTH the config (settings + profiles) AND the SQLite
logbook, so the only way to a separate SQLite logbook — the whole-app "change
database location" pointer — swapped the config too, wiping the operator's setup
(reported: creating a new SQLite for a visiting op lost all profiles/settings).
Now the two are separate files:
- Settings database: settings + profiles. Fresh installs name it settings.db;
existing installs keep opslog.db.
- Logbook (QSOs): a dedicated logbook.db next to the settings db, or a
per-profile file (profile.ProfileDB.Path), or MySQL. connectLogbook opens the
logbook file (db.Open creates+migrates on first use); the settings db is used
as the logbook only if the split ever fails.
One-time, non-destructive migration at startup: if there's no logbook file yet
but the settings db already holds QSOs (legacy combined opslog.db), seed
logbook.db with a clean copy via VACUUM INTO — contacts move to the logbook, the
originals stay in the settings db as an untouched backup.
UI: the Database panel now shows the settings database and this profile's logbook
as two clearly labelled sections (+ "Open folder"), and the logbook selector is
SQLite (default logbook.db, or a dedicated file via "Choose a dedicated file…")
vs MySQL — no more confusing shared/separate choice. New binding RevealDataFolder.
Design flaw: the SQLite backend conflated the app/config database (opslog.db —
settings + profiles) with the QSO logbook. connectLogbook returned a.db for any
non-MySQL profile, so the ONLY way to get a separate SQLite logbook was the
whole-app "change database location" pointer — which swapped config + profiles
too, wiping the operator's setup (reported: creating Jerem.db lost all configs).
profile.ProfileDB gains a Path field: a non-empty path routes that profile's
logbook to its own SQLite file (db.Open creates + migrates it on first use),
while opslog.db keeps settings/profiles. connectLogbook opens the file; empty
path = shared db (unchanged default, backward compatible). MySQLSettings carries
sqlite_path; Get/Save wire it through.
UI: the Database panel gains a third backend option "SQLite — separate file"
with a file picker, and now clearly labels the shared application database
(settings + profiles) vs this profile's logbook, so the two are never confused.
A SteppIR only covers part of the spectrum (a standard one is 20 m–6 m) but
can't report its own range, so the follow loop's existing out-of-range guard
(FreqMin/FreqMax) never engaged for it. Tuning the rig to a band the antenna
can't reach (e.g. 30 m) made the loop keep trying — the immediate cause of the
stuck TX interlock addressed in the previous commit.
Add a Tunable range (MHz) setting to the Antenna panel, wired into the SteppIR
adapter's Status().FreqMin/FreqMax so the follow loop skips out-of-range
frequencies entirely: no tune command, no TX inhibit. Defaults to 13–54 MHz
(20 m–6 m, the common model) when unset; widen the low edge for a 40 m-equipped
SteppIR. Ultrabeam is unaffected (it reports its own per-band coverage).
Keeps the last-commanded-freq deadband from the previous commit as a universal
safety net for any flaky-status case within the valid range.
This reverts commit 6a28344. Restore the once-a-day anonymous PostHog heartbeat
and its opt-out toggle: telemetry.go (sendTelemetryHeartbeat, GetTelemetryEnabled/
SetTelemetryEnabled, PostHog host + API key), the startup goroutine, the Settings
→ General toggle + i18n keys, and the README/wiki mentions. version.go is dropped
again (appVersion moves back into telemetry.go). release.ps1 (untracked) pointed
back at telemetry.go by hand.
Drop the once-a-day anonymous "app_opened" heartbeat to PostHog and everything
around it: telemetry.go (sendTelemetryHeartbeat, GetTelemetryEnabled/
SetTelemetryEnabled, install-ID/last-sent settings keys, PostHog host + API key)
and the startup goroutine that fired it. The 'Send anonymous usage statistics'
toggle is removed from Settings → General (TelemetryToggle + i18n keys), and the
telemetry mentions are stripped from the README and wiki.
appVersion (still used by changelog/update/livestatus/log-email) moves to a new
version.go; release.ps1 now rewrites it there instead of telemetry.go.
The RECEIVE card had grown tall after adding WNB and the SmartSDR v4 DSP rows
(NRL/NRS/NRF/ANFL/RNN/ANFT). Keep the everyday NB/NR/ANF visible and tuck the
supplementary controls behind a collapsible 'DSP' button. The button badges +
highlights when any hidden control is ON so an active filter is never hidden,
and its open/closed state persists in localStorage (opslog.flexDspOpen).
Global "Export to ADIF" gains a third option "Choose fields…" next to the
standard-only and full-OpsLog choices, and right-clicking selected QSOs adds
"Export selected — choose fields…". The picker separates official ADIF 3.1.7
fields (grouped by category) from OpsLog/non-standard tags actually present in
the log (discovered via DistinctExtraKeys over extras_json), with All/None per
group and reset-to-defaults; the selection is persisted per user.
Backend: adif.Exporter gains a Fields allow-set that gates every promoted and
extras field in writeRecord; app.go ExportADIF/ExportADIFFiltered/
ExportADIFSelected take a fields []string param, plus new ADIFExtraFields.
The External-services panel (HRDLOG, eQSL, LoTW, POTA) and the many input
placeholders across all tabs (QRZ/ClubLog included) were still hardcoded
English. Added ~40 es.* keys (EN + FR) and wired every label, placeholder,
hint, checkbox, button and the "coming soon" fallback through t(). Renamed the
tab-map param off `t` so it no longer shadows the i18n function.
The Password-encryption, ClubLog-exceptions and ClubLog-Most-Wanted blocks in
the General settings panel were still hardcoded English. Added ~30 gen.* keys
(EN + FR) and wired every heading, checkbox label, description, button and
status line through t(), plus the passphrase-mismatch error.
The pass-order "#" is a rowIndex valueGetter, but AG-Grid keeps the same row
node across a reorder (getRowId by id) and caches the value, so a moved station
kept its old number. Force-refresh the __order column on every model update in
passOrder mode.
The on-air list was ordered by log time, but a net controller needs the order
the mic goes around. The on-air grid now renders in a controller-owned order:
- A pinned "#" column numbers the round; header sorting is disabled on this
grid (new passOrder prop on RecentQSOsGrid) so a stray click can't reshuffle
it, and any previously-saved sort is stripped on restore.
- ⬆⬇ buttons move the selected station up/down the queue.
- New check-ins append to the end; logged/cancelled stations drop out; the
order is reconciled against the live session list and persisted per net
(localStorage opslog.netOrder.<id>), so a tab switch keeps the round.
- "Log & end" now auto-advances to the NEXT station in pass order.
The first RX-audio CW decoder decoded poorly on real signals (vs SDC) and was
removed in cafade0. This rebuilds the DSP core from scratch in
internal/cwdecode, keeping v1's good ideas (pitch lock, Flex cw_pitch
targeting, tiered acquisition) and fixing its proven failures:
- Two-way DEBOUNCE (pending-commit ~0.3 dit): v1 rejected short marks but not
short spaces, so a one-hop fade inside a dah shattered it into dits — the
single worst real-signal failure.
- Per-character BATCH dit/dah classification at flush time, using the batch's
own bimodal boundary — the first letter of an over decodes at any speed; the
timing clusters (muDit/muDah) are updated with the same attribution, killing
the classify-then-learn feedback spiral ("all dits at 60 WPM").
- dB-domain envelope with separate floor/peak trackers, hysteresis slicer,
span CAP (30 dB — else quiet backgrounds put the off-threshold in the
analysis-window skirts and letters merge) and window de-bias on durations.
- Double squelch: span >= 6 dB AND peak >= bank-median + 9.5 dB (span alone
cannot reject pure noise).
- Hamming-windowed Goertzel, 16 ms window / 5 ms hop (a 20 ms window left
40 WPM inter-element gaps with no envelope dip).
- Hardened acquisition (overlapping windows made "3 stable hops" meaningless)
plus SUPERVISED RE-LOCK: a clearly stronger tone on another pitch sustained
~1 s takes over — heals noise locks and follows a QSY.
- Gap-fed dit-length tracking (inter-element gaps are timing evidence too).
Proven by a synthetic-signal test suite (all passing): clean 12-40 WPM, three
pitches, added noise, QSB fading 0.35-1.0, 10 ms dropouts inside dahs, QRM in
auto and targeted modes, noise-only squelch, mid-over speed change 25->15 WPM,
and jittered hand keying (+/-20-25%, 3 seeds).
Wiring and UI restored from git (app_cw.go, Ear header button, decoded-text
strip with WPM/pitch/level + pitch lock + click-a-word-to-fill-callsign, Tools
menu entry) — strip strings translated (cwd.* i18n keys, EN/FR) this time.
The whole "Manipulateur CW" settings panel was hardcoded in English, so it
stayed English even with the app in French. Added ~35 wk.* keys (EN + FR) and
wired every label/checkbox/select/placeholder through t(). Also removed the long
serial-engine explanation paragraph as requested.
Reported: on a CQ macro the rig drops to RX between words instead of holding TX
for the whole macro. Root cause is PTT not being held (usePTT off, or the RTS
PTT line not wired/honoured). Improvements:
- "Key PTT line" now defaults ON when the Serial engine is selected — without it
the rig runs on semi-break-in and drops between words.
- The serial keyer's line options (PTT, key line, invert, lead/tail, speed) are
now atomic and live-updatable: SaveWinkeyerSettings -> ApplySerialConfig applies
them from the next character, no reconnect needed.
- Each transmission logs its PTT state / key line / lead/tail, so a rig that
still won't hold TX can be diagnosed from the app log.
The macro itself is sent as one string (not fragmented), so PTT is genuinely
held across word gaps when usePTT is on — pending on-air confirmation via the log.
Opt-in (Settings → General). Shows a "MW #rank" pill next to the DXCC entity
name in the entry-strip band/slot matrix — ClubLog's Most Wanted ranking
(1 = most wanted), personalised to the operator's callsign and refreshed daily.
- internal/clublog/mostwanted.go: fetch mostwanted.php?api=1&callsign=<CALL>
(rank→DXCC JSON, real User-Agent), invert to dxcc→rank, cache to
<dataDir>/clublog_mostwanted.json; NeedsRefresh invalidates on callsign change.
- app.go: keyClublogMostWanted setting, a.clublogMW, startup refresh goroutine,
activeCallsign() helper, and Get/Set/Download bindings mirroring the cty ones.
WorkedBefore now carries MWRank (qso.WorkedBefore.MWRank) when enabled.
- BandSlotGrid.tsx: MW pill next to the entity name, colour-tiered by rank.
- SettingsModal General: toggle + download button + status, mirroring the
ClubLog cty-exceptions block.
Also reorganises the changelog: the theme-persistence fix (landed after the
v0.20.11 tag) plus this feature go under a new 0.20.12 entry; 0.20.11 keeps only
what shipped in its binary.
The settings store is backed by the LOCAL SQLite config DB (wired before the
slow remote-MySQL logbook connect), so the "not ready" window is the brief
startup gap before OnStartup builds the store, not a MySQL delay. Fix behaviour
is unchanged; only the comments and changelog wording are corrected.
An update can clear the WebView's localStorage; the theme is then restored from
the portable DB pref, but GetUIPref returned ("", nil) while the settings store
was still starting (indistinguishable from a genuinely-unset pref), so the
self-heal gave up after ~2.4s and fell back to the light default.
GetUIPref now returns an error when the settings store isn't wired yet, and the
theme self-heal treats that as "not ready → keep retrying" (up to ~36s) vs a
real empty answer ("unset → keep default"). A dark theme survives the relaunch.
Some CW interfaces key on the opposite line level (transmit at rest / key
backwards). New "Invert keying (active-LOW)" toggle flips the asserted level for
both the CW and PTT lines, and the idle state drives both lines to their
inactive level accordingly so an active-low rig isn't left keyed at rest.
Default off = N1MM convention (line HIGH = active).
Adds a 4th CW keyer engine alongside K1EL WinKeyer, Icom CI-V and Flex CWX:
OpsLog bit-bangs the Morse itself on a serial control line (DTR keys CW, RTS
keys PTT — swappable), the hardware-keying method N1MM/WSJT use with a Yaesu
SCU-17 and generic interfaces. No WinKeyer chip needed.
- internal/winkeyer/serialcw.go: serialKeyer — worker goroutine, morse table,
WPM + Farnsworth timing (live speed changes), abortable, PTT lead-in/tail/hang.
- winkeyer.Config gains Type ("k1el"|"serial") + CWKeyLine ("dtr"|"rts");
Manager routes Connect/Send/Stop/SetSpeed/Backspace/Disconnect to it.
- app.go: keyWKCWLine setting; WinkeyerConnect sets Type from the engine.
- Settings -> CW Keyer: new "Serial port (DTR=CW/RTS=PTT)" engine with COM port,
key-line selector, speed/Farnsworth/lead-in/tail/PTT. Macros, auto-CQ and
<LOGQSO> reuse the WinKeyer path unchanged.
UNTESTED on hardware (no SCU-17 to hand): polarity assumes N1MM convention
(line HIGH = active). Weight not yet honoured; Farnsworth is.
- Station Control: the amplifier panel is now the exact same card as the FlexRadio panel (extracted shared AmpCard: OPERATE/STANDBY, ON/OFF, power level, output-power bar, live FWD/ID/temp meters). Every configured amp gets its own card — no dropdown.
- Help → "Send log to F4BPO" (only when SMTP is configured): e-mails opslog.log + previous session + crash log to the developer. New email.SendFiles for multi-attachment.
- Bulk edit: new "Frequency (MHz)" field sets freq_hz AND recomputes band; out-of-band values rejected. Fixes a run logged on a stale/default freq after CAT dropped.
- Cluster: Time column sorted lexically on the HHMMZ string, so spots after 0000Z sorted below 2359Z and looked frozen at the UTC rollover. Now sorts by real arrival time.
- Also folds in the DVK auto-CQ/2-column layout and Station Control dashboard batch (changelog 0.20.10, EN+FR).
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.
Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
The station-control code rebuilt a fresh driver on every status poll and every
relay set. Stateful boards (Denkovi FTDI D2XX, USB-serial) hold an OS handle only
one opener can own, so the first poll opened the board and leaked the handle, and
every poll after failed with 'device in use' — the relays greyed out a second
after Save and auto-control never switched. Drivers are now cached per device and
reused, closed on config change. Adds a Test-connection button + detect feedback
in the device editor (reported by VK4MA).
rouggy