ON AIR badge (bottom status bar, shown when live-status publishing is on): a
blinking red light + "On air" when a QSO was logged in the last 5 min, dim
"Offline" otherwise. Seeded at launch from LiveLastQSOAgeSec so it's right
immediately, flips online on qso:logged, expires via a 10s tick.
Auto-updater UI: the update check now also runs every 10 minutes, and the
update notification downloads and installs in-app — a live progress bar
(update:progress) then OpsLog restarts on the new build. Falls back to opening
the release page when there's no auto-download asset or on error (retry).
Regenerated bindings for DownloadAndApplyUpdate / LiveLastQSOAgeSec.
CheckForUpdate now also resolves the release's downloadable asset (portable
.exe, or a .zip to unpack). DownloadAndApplyUpdate streams it with progress
events (update:progress 0-100), swaps it in for the running exe (rename the
current one to .old — allowed for a running image on Windows — move the new one
into place, roll back on failure), then relaunches with --post-update and quits.
main: a --post-update relaunch retries the single-instance mutex for ~20 s so
the fresh process waits for the old one to exit and free it, then clears the
.old exe left behind. Falls back to opening the release page when a release has
no auto-download asset.
The multi-op live status heartbeated every 15 s, so an operator who left the
log open but stopped working still showed on air. Now it publishes an explicit
online flag: online when a new contact was logged within the last 5 minutes,
offline otherwise. live_status gains `online` + `last_qso_at` columns (added to
existing tables via ALTER). Logging a QSO (manual, UDP, ADIF monitor) stamps the
time and republishes at once, so they flip back online instantly.
At launch the last-QSO time is seeded from the DB (Repo.LastQSOTime), so an
operator who worked someone just before starting OpsLog is shown online right
away rather than offline until their next contact. LiveLastQSOAgeSec exposes it
to the UI badge.
Duplicate logs: `saving` is React state (async), so a burst of Enter presses /
clicks fired before the re-render each ran a full AddQSO and logged the same
QSO several times when a slow lookup made logging take a moment. A synchronous
savingRef guard now ignores the repeat immediately.
ESC: clearing the entry (ESC) left the "looking up" spinner turning and let a
still in-flight lookup re-populate the field afterwards. resetEntry now cancels
the pending lookup debounce, hides the spinner at once, and bumps a generation
counter so a late lookup result is discarded instead of applied.
Status clobber: sending an OpsLog QSL card (or stamping a recording) read the
QSO, did slow work (e-mail send), then wrote the WHOLE row back from that now-
stale copy — silently reverting clublog/qrz_qso_upload_status from Y to R that a
concurrent auto-upload had just set. That's why QSOs "showed R again, but only
with QSL sending on", intermittently. New Repo.SetExtra does a targeted
`UPDATE qso SET extras = ?` that touches only the extras column, so an app-field
stamp can never clobber another column. Used by SendEQSL, markRecordingSent and
the recording-path stamp.
Logging speed: the log path no longer runs a callsign lookup at all — the e-mail
already arrives on the QSO from the entry lookup, so the second one was
redundant and stalled logging on a slow/not-found QRZ. And the entry lookup
(LookupCallsign) is now bounded to ~2 s: providers get 2 s, then it falls
through to cty.dat instead of spinning 10 s+ on a call that isn't in QRZ.
The single-worker upload queue introduced head-of-line blocking: one slow
upload (LoTW signing via TQSL, or a service on a 30 s timeout) stalled the
whole queue, so every following QSO's Club Log upload waited and the rows sat
at "R". Operators on the older, concurrent build had no such problem — the
tell that this was a fresh regression.
Back to one goroutine per upload (never serialised), so a slow upload never
holds up the rest, while keeping the transient-failure retry with back-off
(concurrent, so it can't block anything).
OmniRig: on the IC-7610 the generic Freq property reports the wrong VFO (its
Main/Sub model confuses the stock ini), so OpsLog showed VFO B. Detect the rig
by RigType and, in simplex, read VFO A explicitly — matching Log4OM. Only the
7610 is affected; other rigs keep using the generic Freq.
Icom network: when the rig tears the session down (control/CI-V 0x05) OpsLog
only logged it and kept the half-dead link until the 6 s liveness timeout
expired. Mark the link dead on 0x05 so Alive() fails on the next poll and the
manager reconnects cleanly right away.
The RST comboboxes allowed free text, so a report typed by hand that isn't in
the mode's list (e.g. "600") was committed. Drop allowFreeText on the four RST
fields (QSO entry + edit modal) and make commit-on-type push a value only when
it's actually in the list; a leftover invalid entry reverts to the last valid
value on blur. Programmatically filled values (FT8 SNR over UDP, presets) are
unaffected — only manual typing is constrained.
Headline KPI tiles are now tinted cards: a soft colour wash, a corner glow and
a left accent bar, each tile its own hue (QSOs blue, calls teal, DXCC violet,
continents orange, confirmed green) — the number itself stays in foreground ink
for full contrast on every theme. Chart cards gain a soft shadow and a coloured
dot in the header matching the section.
Charts are no longer all-blue: BY MODE colours each bar by the categorical
palette (modes are real categories, like the continents donut), and the other
horizontal-bar charts take their card's accent (top entities green, operators
violet, stations orange) instead of a single blue. Single-hue-per-series
discipline is kept; only genuine categories get per-bar colour.
A QSO logged via UDP / ADIF-import fired `go m.upload` per QSO, so a pileup or
an ADIF-import burst hit a service with dozens of concurrent requests at once.
Club Log's nginx answers that burst with 403; the upload counts as failed and
the QSO stays at "R" while a lucky few go through — the real cause behind the
"it's uploaded but shows R" report (not the earlier display race).
Route all immediate/delayed auto-uploads through a single serialised worker
(one at a time, 250ms apart) so no burst ever trips a per-IP rate limiter.
upload() now reports whether a failure is transient (HTTP/rate-limit) vs
permanent (not eligible, wrong station callsign, no record); transient ones
are retried with exponential back-off (up to 4 attempts, 1s/2s/4s), so a QSO
that hit a momentary 403 ends up marked instead of stuck at R. A full queue
falls back to a goroutine rather than dropping an upload.
Automatically switches the Station Control relay boards from the rig's
current frequency / band. Each relay carries one rule: off (manual), a
frequency window (ON inside [lo,hi] kHz, OFF outside), or a set of bands
(ON on those bands, OFF elsewhere). Evaluated on every CAT frequency/band
change; a relay is only switched when its desired state actually changed,
so tuning within a range doesn't hammer the board.
A cached atomic flag keeps the CAT hot path a no-op when the feature is off
(important during FT8 slice churn). Saving re-applies from the live
frequency so a changed rule takes effect immediately.
New Settings → Hardware → Relay auto-control section: master enable plus a
per-relay mode (Off / Frequency / Band) with kHz range inputs or band
chips, per configured relay board. i18n EN + FR. Azimuth/Time modes (the
other two PstRotator tabs) are left for later.
PANELS[selected]() invokes each settings panel as a plain function, so a panel
must not call hooks. ADIFMonitorPanel uses useState/useEffect/useI18n, which
broke the Rules of Hooks and blanked the section. Render it through JSX
(() => <ADIFMonitorPanel />) so it mounts as a real component with its own
hook context — same pattern as the Flex panel.
A UDP auto-logged QSO shows its Club Log (and other) upload status flick
R->Y->R even though the upload succeeds. Two refreshes race: the immediate
one after the UDP log reads the QSO at "R", the debounced one after
extsvc:uploaded reads it at "Y"; variable MySQL latency lets the older (R)
result resolve last and clobber the newer (Y) data.
Guard refresh() with a monotonic sequence number so only the most recently
issued refresh may apply its result — an older in-flight refresh is dropped.
Fixes the same class of stale-clobber for every confirmation column.
Watches a configurable list of external ADIF files (fldigi RTTY logbook,
N1MM, VarAC…) and imports newly appended QSOs automatically. Each record
goes through the existing UDP-log path, so it gets full enrichment, ±2-minute
dedup (shared udpLogMu, can't race the UDP auto-log) and automatic upload to
the configured external services — no per-file toggles like Log4OM.
A newly added file starts at its current size (offset -1 sentinel → size on
first scan), so the QSOs already in it are NOT bulk-imported; only contacts
logged after it was added come in. Reads only up to the last complete <eor>
so a half-written record waits. Handles truncation/rotation (re-reads from 0,
dedup protects) and persists per-file offsets without clobbering a concurrent
UI edit of the file list.
New Settings → ADIF monitor section: master enable + add/remove/toggle files.
Backend emits adifmon:imported → the grid refreshes and a toast reports the
count. i18n EN + FR.
Header: colour the propagation indices semantically (SFI/SSN green when
strong; A/K green quiet → yellow unsettled → red storm) and glow the QSO-rate
numbers the brand accent when active, dim to muted when idle.
WinKeyer/Icom CW: append a trailing word space to each macro send so two
macros fired back-to-back don't run together in the keyer buffer ("CQ"+"TEST"
→ "CQTEST"). The keyer keys the space at the current speed, so it scales with
WPM. Only the macro path is affected — send-on-type stays per-character.
Club Log: on a failed batch, log the callsign#id of every QSO in it so a
per-record rejection (e.g. a field value nginx's WAF blocks with a 403) can
actually be located instead of hiding behind "batch FAILED".
FCC ULS: catch the maintenance bounce before following it. data.fcc.gov
redirects to www.fcc.gov/system-maintenance during maintenance windows, and
that page then HTTP/2-stream-errors — which surfaced as a cryptic
INTERNAL_ERROR. Detect the redirect and return "try again later".
Opt-in via Settings→General (portable pref opslog.showQsoRate). Shows the
contest-style QSO rate in QSOs/hour, projected from the trailing 10-minute
(count ×6) and 60-minute windows, between the widget icons and propagation.
Backend: qso.RecentRate counts QSOs whose start time falls in each trailing
window, scanning only the last 400 rows (cheap on a large log); App.GetQSORate
exposes the 10/60-min counts. Frontend refreshes on qso:logged and a 30s tick.
The meter shares the propagation grid cell — the header is a fixed 6-column
grid, so adding it as its own child pushed profile/band-map/compact onto a
second row. i18n EN + FR.
theme: self-heal the persisted theme after mount. The synchronous boot
read only looks at localStorage, which is empty when the WebView cleared
its storage or when syncPortablePrefs ran before the backend wired its
settings store (GetUIPref returned "" with no error) — so a restart could
silently land on the default light theme. ThemeProvider now re-reads the
portable pref from the DB once the backend is up (retrying briefly to ride
out a slow startup) and applies it, without clobbering a manual pick.
ClusterGrid: the Call cell now uses a danger pill for NEW DXCC, consistent
with the NEW BAND / NEW MODE pills, instead of a full-cell red fill. cellChip
inherits the column's font size (no fixed 9px / height) so a pill around a
callsign stays the same size as the plain callsigns beside it.
DvkPanel: the voice-keyer TX indicator (LED + label) is red while
transmitting, not orange.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Backend: replace the bounded cluster-event channel (which dropped spots
under RBN bursts once enrichment/UI fell behind) with an unbounded
clusterQueue (slice + sync.Cond). The socket-read goroutine still never
blocks, but a burst now grows the backlog and drains instead of losing
spots. Head compaction keeps a sustained burst from growing the backing
array without bound.
ClusterGrid: drop all hard-coded light-theme hex colours (Time, Country,
Spotter, Comment, POTA, band/mode fills) for semantic CSS-var tokens so
they read correctly on every theme. Replace the heavy full-cell band/mode
fills with small rounded pills (cellChip). Only NEW MODE pills the mode
cell — NEW SLOT (band and mode each worked, just not together) no longer
highlights the mode cell, which wrongly implied the mode was new.
App: stage incoming spots ~50ms and resolve their slot status before
inserting, so a row paints with its badge already on instead of flashing
plain text then flipping to a pill. Self-spot toast still fires per spot.
i18n: translate the General settings that were still English — telemetry
and live-status toggles, the Main view pane pickers and their options.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
New Operator picker next to the contest picker, populated with the operators
actually present in the log. Selecting one recomputes every statistic for that
operator — QSO/DXCC totals, top countries, continent split, by band/mode, and
the rate/best-60. "— Station owner —" buckets QSOs logged with no OPERATOR set.
Shown only when the log has more than one operator.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
The radio-style Ctrl+left/right RIT shortcut skipped any focused input/textarea
(to preserve word navigation), but that's exactly where the operator's focus is
mid-QSO. Now only the RIT offset row itself is skipped; text-field word nav is
overridden only while RIT is engaged.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
The right-click "Update from QRZ" only mapped QTH (city), name, state, county,
grid and zones — the street address and a few other fields QRZ returns were
dropped, so it looked half-updated next to the edit window's Fetch button.
Aligned it to fill the same set: address, email, qsl_via and lat/lon too.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
rouggy
