- Removes the RX-audio CW decoder: deletes app_cw.go + internal/cwdecode, the
cwDecoder/cwPitchHz/cwMu/cwStop App fields, and all frontend state/effects, the
header Ear button, the Tools menu item and the decoded-text strip. The CW
KEYER (WinKeyer/Icom/Flex) is untouched.
- Fix: typing a callsign while a macro is keying now aborts the CURRENT engine
(Flex CWX / Icom / WinKeyer) on the first character, not just WinKeyer during
an auto-call loop — via a shared stopKeyerTx() helper.
Implements the SPE Application Programmer's Guide protocol: packets
0x55 0x55 0x55|CNT|DATA|CHK (sum%256), OPERATE key 0x0D (toggles STANDBY/OPERATE)
and STATUS request 0x90 whose 0xAA-framed reply is a 19-field CSV (mode, RX/TX,
band, power level, output W, SWR, V/I, temp, warnings, alarms). internal/spe
polls status ~1/s over USB serial (go.bug.st/serial, 8N1) or TCP (RS232-to-
Ethernet bridge) — same codec, different transport.
Wired via startPGXL (starts the SPE client for spe* types), bindings GetSPEStatus
/ SPESetOperate, and a live status card + OPERATE/STANDBY toggle in the Amplifier
settings panel. Only the two example-anchored commands are sent (safe); other
keystroke codes were ambiguous in the guide's table. Untested on hardware.
Third relay device alongside WebSwitch and KMTronic. Despite enumerating as a
COM port, this board is driven via FTDI D2XX synchronous bit-bang (one byte = 8
relays, bit 0 = relay 1), not serial ASCII — so we load ftd2xx.dll at runtime
(no CGO) and call FT_OpenEx/FT_SetBitMode/FT_Write, addressing the board by its
FTDI serial (e.g. DAE0006K), exactly like the vendor tool. Windows-only (stub
elsewhere); ListDenkoviDevices enumerates connected serials for the picker.
Wired into relaydev (Count/Status/Set), app.go (deviceDriver/relayCountFor/type
whitelist + ListDenkoviDevices binding), and the Station device editor (new type
+ FTDI-serial field with Detect). Untested on hardware; bit order / on-polarity
may need a flip after a live test.
Completes the CWX type-ahead loop: with send-on-type the keyer-panel CW text
already streams each typed char to the radio's CWX buffer (which keys in order,
so you can keep typing while it sends); this adds the matching un-send. Route
wkBackspace to FlexBackspaceCW -> cwx erase N, so backspacing a mistyped char in
send-on-type removes it from the buffer before the radio keys it.
Adds a Rename button to Settings -> Database: renames the current SQLite database
(e.g. opslog.db -> F4BPO.db) while preserving every setting/profile, unlike New
database which starts empty. Implemented as a VACUUM INTO copy + pointer switch;
the old file (open and locked now) is scheduled via config.json delete_pending
and removed, with its -wal/-shm sidecars, on the next launch.
Adds ExportAwardForCatalog(code, version): writes the selected award as a
catalog-format JSON ({"def":…,"references":…}) stamped with a version and with
user_edited cleared, ready to paste over internal/award/catalog/<code>.json. A
new release then propagates the change to the whole team via mergeCatalog —
unedited copies auto-upgrade, edited ones are offered the update.
UI: a version input + "Publish to catalog…" button in the award editor footer,
defaulting to one past the award's current version.
Award refs are now computed once and stored on the QSO as a JSON column
(award_refs, e.g. {"DDFM":"74","WAJA":"12"}) instead of recomputing the whole
award engine on every grid page load. Written on log/edit/UDP-import and
bulk-recomputed when an award definition or reference list changes; a one-time
per-logbook backfill materializes pre-existing QSOs. The grid reads the column
directly like any other field, so it's fast and available everywhere (including
the shared MySQL logbook).
Also fix per-profile grid column layout: the DB copy was already per-profile,
but the localStorage cache used one global namespace and shadowed it, so a
profile switch kept the previous profile's columns/widths. gridPrefs now scopes
the cache by active profile id and the grids remount on profile:changed.
ON AIR badge (bottom status bar, shown when live-status publishing is on): a
blinking red light + "On air" when a QSO was logged in the last 5 min, dim
"Offline" otherwise. Seeded at launch from LiveLastQSOAgeSec so it's right
immediately, flips online on qso:logged, expires via a 10s tick.
Auto-updater UI: the update check now also runs every 10 minutes, and the
update notification downloads and installs in-app — a live progress bar
(update:progress) then OpsLog restarts on the new build. Falls back to opening
the release page when there's no auto-download asset or on error (retry).
Regenerated bindings for DownloadAndApplyUpdate / LiveLastQSOAgeSec.
Automatically switches the Station Control relay boards from the rig's
current frequency / band. Each relay carries one rule: off (manual), a
frequency window (ON inside [lo,hi] kHz, OFF outside), or a set of bands
(ON on those bands, OFF elsewhere). Evaluated on every CAT frequency/band
change; a relay is only switched when its desired state actually changed,
so tuning within a range doesn't hammer the board.
A cached atomic flag keeps the CAT hot path a no-op when the feature is off
(important during FT8 slice churn). Saving re-applies from the live
frequency so a changed rule takes effect immediately.
New Settings → Hardware → Relay auto-control section: master enable plus a
per-relay mode (Off / Frequency / Band) with kHz range inputs or band
chips, per configured relay board. i18n EN + FR. Azimuth/Time modes (the
other two PstRotator tabs) are left for later.
Watches a configurable list of external ADIF files (fldigi RTTY logbook,
N1MM, VarAC…) and imports newly appended QSOs automatically. Each record
goes through the existing UDP-log path, so it gets full enrichment, ±2-minute
dedup (shared udpLogMu, can't race the UDP auto-log) and automatic upload to
the configured external services — no per-file toggles like Log4OM.
A newly added file starts at its current size (offset -1 sentinel → size on
first scan), so the QSOs already in it are NOT bulk-imported; only contacts
logged after it was added come in. Reads only up to the last complete <eor>
so a half-written record waits. Handles truncation/rotation (re-reads from 0,
dedup protects) and persists per-file offsets without clobbering a concurrent
UI edit of the file list.
New Settings → ADIF monitor section: master enable + add/remove/toggle files.
Backend emits adifmon:imported → the grid refreshes and a toast reports the
count. i18n EN + FR.
New Operator picker next to the contest picker, populated with the operators
actually present in the log. Selecting one recomputes every statistic for that
operator — QSO/DXCC totals, top countries, continent split, by band/mode, and
the rate/best-60. "— Station owner —" buckets QSOs logged with no OPERATOR set.
Shown only when the log has more than one operator.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
rouggy
