chore: release v0.19.2

app.go

@@ -96,6 +96,7 @@ const (
 	keyCATIcomNetHost    = "cat.icom.net.host"   // Icom network remote: rig IP/hostname
 	keyCATIcomNetUser    = "cat.icom.net.user"   // Icom network: Network User1 ID
 	keyCATIcomNetPass    = "cat.icom.net.pass"   // Icom network: Network User1 password
+	keyCATIcomNetAudio   = "cat.icom.net.audio"  // Icom network: stream RX audio on 50003 (experimental)
 	keyCATTCIHost        = "cat.tci.host"        // TCI host (Expert Electronics SunSDR / ExpertSDR2)
 	keyCATTCIPort        = "cat.tci.port"        // TCI WebSocket port (default 40001)
 	keyCATTCISpots       = "cat.tci.spots"       // push cluster spots to the TCI panorama
@@ -244,6 +245,7 @@ const (
 	keyExtLoTWWebPassword  = "extsvc.lotw.web_password"  // LoTW website password (download)
 	keyExtLoTWLastDownload = "extsvc.lotw.last_download" // YYYY-MM-DD of last confirmation pull
 	keyExtQRZLastDownload  = "extsvc.qrz.last_download"  // YYYY-MM-DD of last QRZ confirmation pull
+	keyExtEQSLLastDownload = "extsvc.eqsl.last_download" // YYYY-MM-DD of last eQSL inbox pull
 )
 
 // QSLDefaults is the per-user default for the QSL / eQSL / LoTW / upload
@@ -279,6 +281,7 @@ type CATSettings struct {
 	IcomNetHost    string `json:"icom_net_host"`   // Icom network remote: rig IP/hostname (built-in LAN server)
 	IcomNetUser    string `json:"icom_net_user"`   // Icom network Network User1 ID
 	IcomNetPass    string `json:"icom_net_pass"`   // Icom network Network User1 password
+	IcomNetAudio   bool   `json:"icom_net_audio"`  // Icom network: stream RX audio (50003) — experimental, needs on-rig verification
 	TCIHost        string `json:"tci_host"`        // TCI host (Expert Electronics SunSDR)
 	TCIPort        int    `json:"tci_port"`        // TCI WebSocket port (default 40001)
 	TCISpots       bool   `json:"tci_spots"`       // push cluster spots to the TCI panorama
@@ -4321,7 +4324,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if a.settings == nil {
 		return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault)
+	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault)
 	if err != nil {
 		return CATSettings{}, err
 	}
@@ -4338,6 +4341,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 		IcomNetHost:    m[keyCATIcomNetHost],
 		IcomNetUser:    m[keyCATIcomNetUser],
 		IcomNetPass:    m[keyCATIcomNetPass],
+		IcomNetAudio:   m[keyCATIcomNetAudio] == "1",
 		TCIHost:        m[keyCATTCIHost],
 		TCIPort:        40001,
 		TCISpots:       m[keyCATTCISpots] == "1",
@@ -4413,6 +4417,10 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 	if s.TCISpots {
 		tciSpots = "1"
 	}
+	icomNetAudio := "0"
+	if s.IcomNetAudio {
+		icomNetAudio = "1"
+	}
 	if s.DigitalDefault == "" {
 		s.DigitalDefault = "FT8"
 	}
@@ -4429,6 +4437,7 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 		keyCATIcomNetHost:    strings.TrimSpace(s.IcomNetHost),
 		keyCATIcomNetUser:    strings.TrimSpace(s.IcomNetUser),
 		keyCATIcomNetPass:    s.IcomNetPass,
+		keyCATIcomNetAudio:   icomNetAudio,
 		keyCATTCIHost:        strings.TrimSpace(s.TCIHost),
 		keyCATTCIPort:        strconv.Itoa(s.TCIPort),
 		keyCATTCISpots:       tciSpots,
@@ -5844,8 +5853,20 @@ func (a *App) TestPTT(cfg AudioSettings) error {
 	if err := a.pttKey(cfg); err != nil {
 		return err
 	}
+	// Hold long enough to be observable. OmniRig is async and coalesces rapid
+	// writes to the same parameter: it stores the desired Tx value and flushes
+	// on its own poll timer, so a key (PM_TX) followed too quickly by an unkey
+	// (PM_RX) can land in ONE flush cycle — OmniRig then sends only the last
+	// value (PM_RX) and the rig never actually transmits (while an already-MOX'd
+	// rig gets dropped by that lone PM_RX). A longer hold guarantees the key
+	// command is sent and held before the release. Serial RTS/DTR is instant,
+	// so it keeps the short window.
+	hold := 600 * time.Millisecond
+	if cfg.PTTMethod == "cat" {
+		hold = 1500 * time.Millisecond
+	}
 	gen := a.pttGenNow()
-	go func() { time.Sleep(600 * time.Millisecond); a.unkeyIfCurrent(gen) }()
+	go func() { time.Sleep(hold); a.unkeyIfCurrent(gen) }()
 	return nil
 }
 
@@ -5865,6 +5886,72 @@ func (a *App) DVKStop() {
 	}
 }
 
+// AudioStartMonitor pipes live RX audio from the rig into your speakers so you
+// hear the radio inside OpsLog. Source = the "From radio" capture device (for a
+// USB-connected rig, its "USB Audio CODEC" input); sink = the "Listening"
+// device. This is the USB half of the audio feature; the network 50003 stream
+// will later Push into the same output path (see audio.Manager.PushMonitorAudio).
+func (a *App) AudioStartMonitor() error {
+	if a.audioMgr == nil {
+		return fmt.Errorf("audio not initialized")
+	}
+	cfg, _ := a.GetAudioSettings()
+	if strings.TrimSpace(cfg.FromRadio) == "" {
+		return fmt.Errorf(`no "From radio" capture device set — pick the rig's USB Audio CODEC in Settings → Audio`)
+	}
+	applog.Printf("audio: RX monitor start (from=%q → listen=%q)", cfg.FromRadio, cfg.ListeningDevice)
+	return a.audioMgr.StartMonitor(cfg.FromRadio, cfg.ListeningDevice)
+}
+
+// AudioStopMonitor stops the RX monitor passthrough.
+func (a *App) AudioStopMonitor() {
+	if a.audioMgr != nil {
+		a.audioMgr.StopMonitor()
+		applog.Printf("audio: RX monitor stopped")
+	}
+}
+
+// AudioMonitorActive reports whether the RX monitor is running (for the toggle).
+func (a *App) AudioMonitorActive() bool {
+	return a.audioMgr != nil && a.audioMgr.MonitorActive()
+}
+
+// AudioStartTX keys PTT and pipes your live mic into the rig ("To Radio" device)
+// so you can talk through the PC — the USB half of TX voice. PTT uses the
+// configured method (CAT/RTS/DTR); if keying fails the audio route isn't started.
+func (a *App) AudioStartTX() error {
+	if a.audioMgr == nil {
+		return fmt.Errorf("audio not initialized")
+	}
+	cfg, _ := a.GetAudioSettings()
+	if strings.TrimSpace(cfg.ToRadio) == "" {
+		return fmt.Errorf(`no "To radio" device set — pick the rig's USB Audio CODEC output in Settings → Audio`)
+	}
+	if err := a.pttKey(cfg); err != nil { // key first — no point streaming to a rig that isn't transmitting
+		return err
+	}
+	if err := a.audioMgr.StartTXAudio(cfg.RecordingDevice, cfg.ToRadio); err != nil {
+		a.pttUnkey()
+		return err
+	}
+	applog.Printf("audio: TX start (mic=%q → to-radio=%q, ptt=%q)", cfg.RecordingDevice, cfg.ToRadio, cfg.PTTMethod)
+	return nil
+}
+
+// AudioStopTX stops the TX passthrough and unkeys PTT.
+func (a *App) AudioStopTX() {
+	if a.audioMgr != nil {
+		a.audioMgr.StopTXAudio()
+	}
+	a.pttUnkey()
+	applog.Printf("audio: TX stopped")
+}
+
+// AudioTXActive reports whether the TX passthrough is running (for the toggle).
+func (a *App) AudioTXActive() bool {
+	return a.audioMgr != nil && a.audioMgr.TXAudioActive()
+}
+
 // GetLogFilePath returns where the diagnostic log file lives so the user
 // can open it from the Settings UI. Empty when applog hasn't initialised.
 func (a *App) GetLogFilePath() string {
@@ -6819,6 +6906,97 @@ func (a *App) runDownloadConfirmations(svc extsvc.Service, cfg extsvc.ExternalSe
 		emit(fmt.Sprintf("Confirmed %d, added %d (of %d returned)", matched, added, total))
 		// (last-download date already stored right after the fetch above)
 
+	case extsvc.ServiceEQSL:
+		sinceDate := resolveSince(keyExtEQSLLastDownload)
+		if sinceDate != "" {
+			emit("Downloading eQSL Inbox (confirmations received since " + sinceDate + ")…")
+		} else {
+			emit("Downloading full eQSL Inbox (all received confirmations)…")
+		}
+		adifText, err := extsvc.DownloadEQSLConfirmations(ctx, nil, cfg.EQSL, sinceDate)
+		if err != nil {
+			emit("Download failed: " + err.Error())
+			done(matched, total)
+			return
+		}
+		keyIDs, kerr := a.qso.DedupeKeyIDs(ctx)
+		if kerr != nil {
+			emit("Error reading local log: " + kerr.Error())
+			done(matched, total)
+			return
+		}
+		// eQSL confirmations aren't ARRL-award-valid (only LoTW + paper QSL are),
+		// so NEW is judged only against other eQSL confirmations.
+		sets, _ := a.qso.ConfirmedSlots(ctx, []string{"eqsl_rcvd"})
+		var items []ConfirmationItem
+		var unmatched []string
+		perr := adif.Parse(strings.NewReader(adifText), func(rec adif.Record) error {
+			q, ok := adif.RecordToQSO(rec)
+			if !ok {
+				return nil
+			}
+			total++
+			// eQSL stamps the confirmation date in QSLRDATE (fall back to today).
+			date := rec["qslrdate"]
+			if date == "" {
+				date = time.Now().UTC().Format("20060102")
+			}
+			a.enrichContactedFromCty(&q)
+			key := qso.DedupeKey(q.Callsign, q.QSODate.UTC().Format("2006-01-02T15:04"), q.Band, q.Mode)
+			if id, found := keyIDs[key]; found {
+				if e := a.qso.MarkEQSLConfirmed(ctx, id, date); e == nil {
+					matched++
+				}
+			} else if addNotFound {
+				q.EQSLSent = "Y"
+				q.EQSLRcvd = "Y"
+				q.EQSLRcvdDate = date
+				if newID, e := a.qso.Add(ctx, q); e == nil {
+					keyIDs[key] = newID
+					added++
+				}
+			} else {
+				unmatched = append(unmatched, fmt.Sprintf("%s · %s · %s · %s",
+					q.Callsign, q.QSODate.UTC().Format("2006-01-02 15:04Z"), q.Band, q.Mode))
+			}
+			dxccNum := 0
+			if q.DXCC != nil {
+				dxccNum = *q.DXCC
+			}
+			it := ConfirmationItem{
+				Callsign: q.Callsign,
+				QSODate:  q.QSODate.UTC().Format(time.RFC3339),
+				Band:     q.Band, Mode: q.Mode, Country: q.Country,
+			}
+			if dxccNum != 0 {
+				it.NewDXCC = !sets.DXCC[dxccNum]
+				it.NewBand = !sets.Band[qso.BandKey(dxccNum, q.Band)]
+				it.NewSlot = !sets.Slot[qso.SlotKey(dxccNum, q.Band, q.Mode)]
+				sets.DXCC[dxccNum] = true
+				sets.Band[qso.BandKey(dxccNum, q.Band)] = true
+				sets.Slot[qso.SlotKey(dxccNum, q.Band, q.Mode)] = true
+			}
+			items = append(items, it)
+			return nil
+		})
+		if a.ctx != nil {
+			wruntime.EventsEmit(a.ctx, "qslmgr:confirmations", items)
+		}
+		if perr != nil {
+			emit("Parse error: " + perr.Error())
+		}
+		if addNotFound {
+			emit(fmt.Sprintf("Matched %d, added %d (of %d eQSL confirmation(s))", matched, added, total))
+		} else {
+			emit(fmt.Sprintf("Matched %d of %d eQSL confirmation(s)", matched, total))
+		}
+		for _, u := range unmatched {
+			emit("  ⚠ no local QSO for: " + u)
+		}
+		if a.settings != nil {
+			a.setSetting(a.profileScope()+keyExtEQSLLastDownload, time.Now().UTC().Format("2006-01-02"))
+		}
+
 	default:
 		emit(fmt.Sprintf("Confirmation download isn't available for %s yet.", svc))
 	}
@@ -8492,6 +8670,30 @@ func (a *App) FlexSetAPFLevel(l int) error {
 	}
 	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetAPFLevel(l) })
 }
+func (a *App) FlexSetWNB(on bool) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetWNB(on) })
+}
+func (a *App) FlexSetWNBLevel(l int) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetWNBLevel(l) })
+}
+func (a *App) FlexSetTXFilter(low, high int) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetTXFilter(low, high) })
+}
+func (a *App) FlexSetMicProfile(name string) error {
+	if a.cat == nil {
+		return fmt.Errorf("cat not initialized")
+	}
+	return a.cat.FlexDo(func(fc cat.FlexController) error { return fc.SetMicProfile(name) })
+}
 func (a *App) FlexSetCWSpeed(wpm int) error {
 	if a.cat == nil {
 		return fmt.Errorf("cat not initialized")
@@ -8594,7 +8796,28 @@ func (a *App) reloadCAT() {
 	case "icom-net":
 		// Icom CI-V over the rig's built-in LAN server (remote, no RS-BA1 / Remote
 		// Utility). Reuses the whole IcomController over the network transport.
-		a.cat.Start(cat.NewIcomNet(s.IcomNetHost, s.IcomNetUser, s.IcomNetPass, s.IcomAddr, s.DigitalDefault))
+		var audioSink func([]byte)
+		if s.IcomNetAudio && a.audioMgr != nil {
+			// Experimental: stream RX audio over 50003. Start the render-only monitor
+			// sink (no USB capture) and feed each decoded payload into it, so remote
+			// RX audio plays through the "Listening" device. Decoding is via the PCM
+			// codec (Opus later). The 50003 payload OFFSET is still pending on-rig
+			// verification (see icomaudio.go) — hence experimental + opt-in.
+			acfg, _ := a.GetAudioSettings()
+			a.audioMgr.StopMonitor() // clear any prior monitor/sink so a re-save restarts cleanly
+			if err := a.audioMgr.StartMonitorSink(acfg.ListeningDevice); err != nil {
+				applog.Printf("icom-net audio: cannot start output sink: %v", err)
+			} else {
+				codec := audio.NewPCM16Codec()
+				audioSink = func(payload []byte) {
+					if pcm, err := codec.Decode(payload); err == nil {
+						a.audioMgr.PushMonitorAudio(pcm)
+					}
+				}
+				applog.Printf("icom-net audio: RX audio streaming ENABLED (experimental) → %q", acfg.ListeningDevice)
+			}
+		}
+		a.cat.Start(cat.NewIcomNet(s.IcomNetHost, s.IcomNetUser, s.IcomNetPass, s.IcomAddr, s.DigitalDefault, audioSink))
 	case "tci":
 		// Expert Electronics TCI (WebSocket) — SunSDR / ExpertSDR2, or any
 		// TCI-compatible server.

frontend/src/App.tsx

@@ -366,6 +366,11 @@ export default function App() {
 
   // CAT — receives live rig state via Wails events.
   const [catState, setCatState] = useState<CATState>({ enabled: false, connected: false } as any);
+  // Configured CAT backend ('icom' USB vs 'icom-net'): the live catState.backend
+  // is "icom" for BOTH, so we track the settings value to tell them apart (used to
+  // hide the rig ON/OFF buttons on USB, where the interface is unpowered when the
+  // rig is off so power-ON can't work).
+  const [catBackend, setCatBackend] = useState('');
   const [rotatorHeading, setRotatorHeading] = useState<{ enabled: boolean; ok: boolean; azimuth: number }>({ enabled: false, ok: false, azimuth: 0 });
   const [ubStatus, setUbStatus] = useState<{ enabled: boolean; connected: boolean; direction: number; moving: boolean }>({ enabled: false, connected: false, direction: 0, moving: false });
   const [agStatus, setAgStatus] = useState<AGStatus>({ connected: false, port_a: 0, port_b: 0, antennas: [] });
@@ -1352,6 +1357,7 @@ export default function App() {
     try {
       const c = await GetCATSettings();
       if (c.digital_default) digitalDefaultRef.current = c.digital_default;
+      setCatBackend(c.backend ?? '');
     } catch {}
   }, []);
   const loadLists = useCallback(async () => {
@@ -3154,7 +3160,7 @@ export default function App() {
       case 'icom':
         return (
           <div className="h-full w-full min-h-0 rounded-lg overflow-hidden border border-border">
-            <IcomPanel onReportRST={(r) => { setRstSent(r); rstUserEditedRef.current = true; }} />
+            <IcomPanel isNetwork={catBackend === 'icom-net'} onReportRST={(r) => { setRstSent(r); rstUserEditedRef.current = true; }} />
           </div>
         );
       case 'netcontrol':
@@ -3754,6 +3760,7 @@ export default function App() {
                 status={agStatus}
                 onActivate={agActivate}
                 onClose={() => { setShowAntGenius(false); writeUiPref('opslog.showAntGenius', '0'); }}
+                band={band}
               />
             </div>
           )}
@@ -4245,7 +4252,7 @@ export default function App() {
                 is an Icom. */}
             {catState.backend === 'icom' && (
               <TabsContent value="icom" className="flex-1 min-h-0 p-0">
-                <IcomPanel onReportRST={(r) => { setRstSent(r); rstUserEditedRef.current = true; }} />
+                <IcomPanel isNetwork={catBackend === 'icom-net'} onReportRST={(r) => { setRstSent(r); rstUserEditedRef.current = true; }} />
               </TabsContent>
             )}
 
@@ -4397,9 +4404,14 @@ export default function App() {
         onClose={() => setShowSpotModal(false)}
         // Callsign: the QSO-entry call, else the last logged QSO.
         defaultCall={callsign.trim() || qsos[0]?.callsign || ''}
-        // Freq: the entry TX freq (kHz), else the last logged QSO's.
+        // Freq (0.1 kHz): the LIVE CAT frequency in Hz when connected — NOT the
+        // freqMhz display string, which the manual-edit freeze / field locks can
+        // leave stale (that dropped the sub-kHz: on 14134.5 the frozen "14.134"
+        // string spotted 14134). Fall back to the entry field, then the last QSO.
         defaultFreqKHz={
-          parseFloat(freqMhz) > 0
+          catState.connected && (catState.freq_hz ?? 0) > 0
+            ? Math.round(((catState.freq_hz ?? 0) / 1000) * 10) / 10
+            : parseFloat(freqMhz) > 0
               ? Math.round(parseFloat(freqMhz) * 1000 * 10) / 10
               : (qsos[0]?.freq_hz ? Math.round((qsos[0].freq_hz / 1000) * 10) / 10 : 0)
         }

frontend/src/components/AntGeniusPanel.tsx

@@ -1,14 +1,30 @@
-import { Antenna, X } from 'lucide-react';
+import { useState } from 'react';
+import { Antenna, X, ListFilter } from 'lucide-react';
 import { cn } from '@/lib/utils';
 import { useI18n } from '@/lib/i18n';
 
-export type AGAntenna = { index: number; name: string };
+export type AGAntenna = { index: number; name: string; bands?: number };
 export type AGStatus = {
   connected: boolean; host?: string; last_error?: string;
   port_a: number; port_b: number; tx_a?: boolean; tx_b?: boolean;
   antennas: AGAntenna[];
 };
 
+// AG_BAND_BITS maps a band name to its bit in the 4O3A Antenna Genius band
+// bitmask (standard HF+6m order, bit 0 = 160m). Used to show only the antennas
+// configured for the current band, like the native app. If the mapping ever
+// proves off on real hardware, the debug log (antgenius: antenna raw …) shows the
+// device's actual mask so it can be corrected.
+const AG_BAND_BITS: Record<string, number> = {
+  '160m': 1 << 0, '80m': 1 << 1, '60m': 0, '40m': 1 << 2, '30m': 1 << 3,
+  '20m': 1 << 4, '17m': 1 << 5, '15m': 1 << 6, '12m': 1 << 7, '10m': 1 << 8, '6m': 1 << 9,
+};
+
+function bandBit(band?: string): number {
+  if (!band) return 0;
+  return AG_BAND_BITS[band.trim().toLowerCase()] ?? 0;
+}
+
 // Format an antenna name: first letter uppercase, the rest lowercase
 // (e.g. "DX COMMANDER" → "Dx commander").
 function pretty(name: string): string {
@@ -22,13 +38,28 @@ function pretty(name: string): string {
 // a port-A button (left) and port-B button (right). Colours: green = selected on
 // port A, blue = selected on port B, red (pulsing) = that port is transmitting.
 // Clicking an already-selected port deselects it (port → None).
-export function AntGeniusPanel({ status, onActivate, onClose }: {
+export function AntGeniusPanel({ status, onActivate, onClose, band }: {
   status: AGStatus;
   onActivate: (port: number, antenna: number) => void; // antenna 0 = deselect
   onClose: () => void;
+  band?: string; // current operating band (e.g. "20m") for the band filter
 }) {
   const { t } = useI18n();
-  const list = status.antennas ?? [];
+  const allAntennas = status.antennas ?? [];
+
+  // Band filter (persisted, default ON): show only antennas whose band mask
+  // includes the current band — matching the native 4O3A app. Antennas with an
+  // unknown mask (0) always show, and if the filter would hide EVERYTHING (e.g. a
+  // band we can't map, or masks the device didn't send) we fall back to the full
+  // list so the panel is never mysteriously empty.
+  const [bandFilter, setBandFilter] = useState(() => localStorage.getItem('opslog.agBandFilter') !== '0');
+  const toggleBandFilter = () => setBandFilter((v) => { const n = !v; localStorage.setItem('opslog.agBandFilter', n ? '1' : '0'); return n; });
+  const bit = bandBit(band);
+  let list = allAntennas;
+  if (bandFilter && bit !== 0) {
+    const filtered = allAntennas.filter((a) => !a.bands || (a.bands & bit) !== 0);
+    if (filtered.length > 0) list = filtered;
+  }
 
   const PortBtn = ({ port, index, active, tx }: { port: 1 | 2; index: number; active: boolean; tx: boolean }) => {
     const letter = port === 1 ? 'A' : 'B';
@@ -57,6 +88,11 @@ export function AntGeniusPanel({ status, onActivate, onClose }: {
         <Antenna className={cn('size-4', status.connected ? 'text-success drop-shadow-[0_0_3px_rgba(16,185,129,0.55)]' : 'text-muted-foreground')} />
         <span className="text-xs font-bold uppercase tracking-[0.18em] text-foreground/80">Antenna Genius</span>
         <span className="flex-1" />
+        <button type="button" onClick={toggleBandFilter}
+          title={bandFilter ? t('agp.filterOnHint', { band: band || '' }) : t('agp.filterOffHint')}
+          className={cn('transition-colors', bandFilter ? 'text-primary' : 'text-muted-foreground/50 hover:text-muted-foreground')}>
+          <ListFilter className="size-3.5" />
+        </button>
         <span className="inline-flex items-center gap-1.5 text-[10px] font-mono uppercase tracking-wider">
           <span className={cn('size-1.5 rounded-full', status.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)] animate-pulse' : 'bg-danger')} />
           <span className={status.connected ? 'text-success' : 'text-danger'}>{status.connected ? t('agp.online') : t('agp.offline')}</span>

frontend/src/components/FilterBuilder.tsx

@@ -1,4 +1,4 @@
-import { useEffect, useState } from 'react';
+import { useEffect, useMemo, useState } from 'react';
 import { Plus, Trash2, Save, FolderOpen, X } from 'lucide-react';
 import { writeUiPref } from '@/lib/uiPref';
 import { Dialog, DialogContent, DialogHeader, DialogTitle, DialogFooter } from '@/components/ui/dialog';
@@ -134,6 +134,12 @@ interface Props {
 
 export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
   const { t } = useI18n();
+  // Field dropdown sorted alphabetically by translated label (the FIELDS array is
+  // grouped by category for maintenance; the operator wants it A→Z to find things).
+  const sortedFields = useMemo(
+    () => FIELDS.map((f) => ({ f, txt: t(f.label) })).sort((a, b) => a.txt.localeCompare(b.txt)),
+    [t],
+  );
   const [conditions, setConditions] = useState<FilterCondition[]>([]);
   const [match, setMatch] = useState<'AND' | 'OR'>('AND');
   const [presets, setPresets] = useState<Record<string, QueryFilter>>({});
@@ -237,7 +243,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
                 }}>
                   <SelectTrigger className="h-8 w-48 text-xs"><SelectValue /></SelectTrigger>
                   <SelectContent className="max-h-72">
-                    {FIELDS.map((f) => <SelectItem key={f.value} value={f.value}>{t(f.label)}</SelectItem>)}
+                    {sortedFields.map(({ f, txt }) => <SelectItem key={f.value} value={f.value}>{txt}</SelectItem>)}
                   </SelectContent>
                 </Select>
                 <Select value={c.op} onValueChange={(v) => setCond(i, { op: v as FilterOp })}>

frontend/src/components/FlexPanel.tsx

@@ -7,6 +7,7 @@ import {
   GetPGXLStatus, PGXLSetFanMode,
   FlexSetAGCMode, FlexSetAGCThreshold, FlexSetAudioLevel, FlexSetMute, FlexSetRXAntenna, FlexSetTXAntenna, FlexSetSplit, FlexSetActiveSlice, FlexSetTXSlice,
   FlexSetNB, FlexSetNBLevel, FlexSetNR, FlexSetNRLevel, FlexSetANF, FlexSetANFLevel,
+  FlexSetWNB, FlexSetWNBLevel, FlexSetTXFilter, FlexSetMicProfile,
   FlexSetAPF, FlexSetAPFLevel, FlexSetCWSpeed, FlexSetCWPitch, FlexSetCWBreakInDelay,
   FlexSetCWSidetone, FlexSetSidetoneLevel, FlexSetCWFilter, FlexSetFilter,
 } from '../../wailsjs/go/main/App';
@@ -25,6 +26,8 @@ type FlexState = {
   rx_ant?: string; tx_ant?: string; ant_list?: string[]; tx_ant_list?: string[];
   split: boolean; rx_freq_hz?: number; tx_freq_hz?: number;
   nb: boolean; nb_level: number; nr: boolean; nr_level: number; anf: boolean; anf_level: number;
+  wnb: boolean; wnb_level: number;
+  tx_filter_low: number; tx_filter_high: number; mic_profile?: string; mic_profiles?: string[];
   mode?: string;
   cw_speed: number; cw_pitch: number; cw_break_in_delay: number; cw_sidetone: boolean; cw_mon_level: number;
   apf: boolean; apf_level: number; filter_lo: number; filter_hi: number;
@@ -42,6 +45,7 @@ const ZERO: FlexState = {
   mon: false, mon_level: 0, mic_level: 0, atu_memories: false,
   rx_avail: false, agc_threshold: 0, audio_level: 0, mute: false, split: false,
   nb: false, nb_level: 0, nr: false, nr_level: 0, anf: false, anf_level: 0,
+  wnb: false, wnb_level: 0, tx_filter_low: 0, tx_filter_high: 0,
   cw_speed: 25, cw_pitch: 600, cw_break_in_delay: 30, cw_sidetone: true, cw_mon_level: 0,
   apf: false, apf_level: 0, filter_lo: 0, filter_hi: 0,
   amp_available: false, amp_operate: false,
@@ -143,27 +147,28 @@ function LevelRow({ label, on, onToggle, value, onLevel, disabled, accent, slide
 // `display` overrides the numeric readout; `segColor` colours segments by their
 // 0..1 position (zones); the top ~18% light red by default (overload/peak).
 const METER_SEGMENTS = 26;
-function MeterBar({ label, value, unit, lo, hi, accent = '#16a34a', extra, display, segColor, onClick, title }: {
+function MeterBar({ label, value, unit, lo, hi, accent = '#16a34a', extra, display, segColor, onClick, title, compact }: {
   label: string; value: number; unit?: string; lo: number; hi: number; accent?: string; extra?: string; display?: string;
-  segColor?: (frac: number) => string; onClick?: () => void; title?: string;
+  segColor?: (frac: number) => string; onClick?: () => void; title?: string; compact?: boolean;
 }) {
   const span = hi - lo;
   const pct = span > 0 ? Math.max(0, Math.min(100, ((value - lo) / span) * 100)) : 0;
   const lit = Math.round((pct / 100) * METER_SEGMENTS);
   return (
     <div onClick={onClick} title={title}
-      className={cn('rounded-lg border border-border/70 px-2.5 py-2 bg-gradient-to-b from-card to-muted/40 shadow-sm min-w-0',
+      className={cn('rounded-lg border border-border/70 bg-gradient-to-b from-card to-muted/40 shadow-sm min-w-0',
+        compact ? 'px-2 py-1' : 'px-2.5 py-2',
         onClick && 'cursor-pointer hover:border-primary/60 hover:from-muted/40')}>
-      <div className="flex items-baseline justify-between gap-1 mb-1.5">
+      <div className={cn('flex items-baseline justify-between gap-1', compact ? 'mb-1' : 'mb-1.5')}>
         <span className="text-[10px] font-bold uppercase tracking-wider text-muted-foreground truncate">{label}</span>
-        <span className="text-sm font-mono font-bold tabular-nums whitespace-nowrap text-foreground/90">
+        <span className={cn('font-mono font-bold tabular-nums whitespace-nowrap text-foreground/90', compact ? 'text-xs' : 'text-sm')}>
           {display !== undefined ? display : (
             <>{Math.abs(value) >= 100 ? value.toFixed(0) : value.toFixed(1)}<span className="text-muted-foreground text-[10px] ml-0.5">{unit}</span></>
           )}
         </span>
       </div>
       {/* LED bar — recessed track + gradient segments for a cleaner instrument look. */}
-      <div className="flex gap-[2px] h-3 items-stretch rounded-[3px] bg-black/10 p-[2px]">
+      <div className={cn('flex gap-[2px] items-stretch rounded-[3px] bg-black/10 p-[2px]', compact ? 'h-2' : 'h-3')}>
         {Array.from({ length: METER_SEGMENTS }).map((_, i) => {
           const on = i < lit;
           const frac = i / METER_SEGMENTS;
@@ -176,7 +181,7 @@ function MeterBar({ label, value, unit, lo, hi, accent = '#16a34a', extra, displ
           );
         })}
       </div>
-      {extra && <div className="text-[10px] text-muted-foreground/70 mt-1 text-right font-mono">{extra}</div>}
+      {extra && !compact && <div className="text-[10px] text-muted-foreground/70 mt-1 text-right font-mono">{extra}</div>}
     </div>
   );
 }
@@ -262,6 +267,13 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
     ? SSB_BW.reduce((best, bw) => (Math.abs(bw - curBW) < Math.abs(best - curBW) ? bw : best), SSB_BW[0])
     : -1;
 
+  // Compact header readouts for PA voltage + temperature (numbers, not bars) — the
+  // user wanted these in the header to save vertical space in the Meters card.
+  const hdrMeters = st.meters || [];
+  const hdrFind = (name: string) => hdrMeters.find((m) => (m.name || '').toUpperCase().includes(name) && !(m.src || '').toUpperCase().includes('AMP'));
+  const voltM = hdrFind('13.8') || hdrFind('VOLT');
+  const patempM = hdrFind('PATEMP') || hdrFind('PA TEMP');
+
   return (
     <div className="h-full min-h-0 overflow-auto bg-background">
       <div className="max-w-5xl mx-auto p-3 space-y-3">
@@ -274,6 +286,23 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
             <span className="text-[11px] text-slate-400">{t('flxp.smartsdrRemote')}</span>
           </div>
           <div className="flex-1" />
+          {/* Compact PA voltage + temperature readouts (numbers) to save space. */}
+          {!off && (voltM || patempM) && (
+            <div className="flex items-center gap-4 mr-1 font-mono tabular-nums">
+              {voltM && (
+                <span className="flex flex-col items-end leading-none">
+                  <span className="text-[9px] uppercase tracking-wider text-slate-400 font-sans">{t('flxp.voltage')}</span>
+                  <span className="text-sm font-bold">{voltM.value.toFixed(1)}<span className="text-[9px] text-slate-400 ml-0.5">V</span></span>
+                </span>
+              )}
+              {patempM && (
+                <span className="flex flex-col items-end leading-none">
+                  <span className="text-[9px] uppercase tracking-wider text-slate-400 font-sans">{t('flxp.paTemp')}</span>
+                  <span className={cn('text-sm font-bold', patempM.value >= 70 ? 'text-red-400' : patempM.value >= 55 ? 'text-amber-400' : 'text-slate-100')}>{patempM.value.toFixed(0)}<span className="text-[9px] text-slate-400 ml-0.5">°C</span></span>
+                </span>
+              )}
+            </div>
+          )}
           <span className={cn('inline-flex items-center gap-1.5 px-3 py-1.5 rounded-lg text-sm font-extrabold tracking-wider',
             !st.available ? 'bg-muted text-muted-foreground'
               : st.transmitting ? 'bg-danger text-danger-foreground shadow-[0_0_16px] shadow-danger/60' : 'bg-success text-success-foreground')}>
@@ -315,6 +344,58 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
           </div>
         )}
 
+        {/* Live meters (UDP VITA-49 stream) — placed right under the slices. */}
+        <Card icon={Gauge} title={t('flxp.meters')}>
+          {(() => {
+            const meters = st.meters || [];
+            if (off || meters.length === 0) {
+              return <p className="text-[11px] text-muted-foreground text-center py-2">{t('flxp.noMeters')}</p>;
+            }
+            const isDbm = (m?: Meter) => !!m && /dbm/i.test(m.unit || '');
+            const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
+            // Radio meters (exclude the amplifier's, which we show separately).
+            const radio = (name: string) => meters.find((m) =>
+              (m.name || '').toUpperCase().includes(name) && !(m.src || '').toUpperCase().includes('AMP'));
+            const sig = radio('LEVEL') || radio('SIGNAL');
+            const fwd = radio('FWDPWR');
+            const swr = radio('SWR');
+            // Mic input level + speech-compression (voltage & PA temp live in the
+            // header now). All already in the meter stream.
+            const mic = meters.find((m) => /MIC/i.test(m.name || '') && !(m.src || '').toUpperCase().includes('AMP'));
+            const comp = radio('COMPPEAK') || radio('COMP');
+            // S-meter: dBm → S-units (S9 = -73 dBm on HF, 6 dB per unit).
+            const sUnit = (dbm: number) => {
+              const sv = (dbm + 127) / 6; // S0 = -127 dBm
+              if (sv >= 9) {
+                const over = Math.max(0, Math.round(dbm + 73)); // dB over S9
+                return { display: over > 0 ? `S9+${over}` : 'S9', bar: sv, s: 9, over };
+              }
+              return { display: `S${Math.max(0, Math.round(sv))}`, bar: Math.max(0, sv), s: Math.max(0, sv), over: 0 };
+            };
+            const cur = [
+              sig && (() => { const dbm = peakHold('s', sig.value); const s = sUnit(dbm); return (
+                <MeterBar key="s" label="S-METER" value={s.bar} lo={0} hi={19} accent="#16a34a" display={s.display} extra={`${dbm.toFixed(1)} dBm`}
+                  title={onReportRST ? t('rst.clickToFill') : undefined}
+                  onClick={onReportRST ? () => onReportRST(sMeterRST(s.s, s.over, st.mode)) : undefined}
+                  segColor={(fr) => { const sval = fr * 19; return sval < 9 ? '#16a34a' : sval < 12.33 ? '#f59e0b' : '#dc2626'; }} />
+              ); })(),
+              fwd && (() => { const w = peakHold('p', isDbm(fwd) ? dbmToW(fwd.value) : fwd.value); return (
+                <MeterBar key="p" label="PWR" unit="W" lo={0} hi={120} accent="#dc2626"
+                  value={w} extra={isDbm(fwd) ? `${fwd.value.toFixed(1)} dBm` : undefined} />
+              ); })(),
+              swr && <MeterBar key="w" label="SWR" value={peakHold('w', swr.value)} unit="" lo={1} hi={3} accent="#d97706" />,
+              // Mic input level: fixed -40..+10 dB scale, RED from 0 dB up (overdrive).
+              mic && <MeterBar key="mic" label="MIC" value={peakHold('mic', mic.value)} unit={mic.unit || 'dB'} lo={-40} hi={10} accent="#16a34a"
+                segColor={(fr) => (fr >= 0.8 ? '#dc2626' : fr >= 0.7 ? '#f59e0b' : '#16a34a')} />,
+              // Speech compression (dB of gain reduction).
+              comp && <MeterBar key="comp" label="COMP" value={peakHold('comp', comp.value)} unit={comp.unit || 'dB'} lo={0} hi={(comp.hi && comp.hi > 0) ? comp.hi : 25} accent="#0891b2" />,
+            ].filter(Boolean);
+            return (
+              <div className="grid grid-cols-2 sm:grid-cols-3 gap-2">{cur}</div>
+            );
+          })()}
+        </Card>
+
         {off && (
           <div className="text-center text-sm text-muted-foreground py-6">
             {t('flxp.waiting')}
@@ -391,6 +472,39 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                 <Slider value={st.mic_level} disabled={off} accent="#2563eb" onChange={(v) => change('mic_level', v, () => FlexSetMic(v))} />
                 <span className="w-8 text-right text-xs font-mono tabular-nums text-muted-foreground">{st.mic_level}</span>
               </div>
+              {/* TX audio bandwidth — low/high cut (Hz). Typed locally, committed on
+                  blur/Enter so we don't spam a command per keystroke; the hold guard
+                  keeps the poll from clobbering the field mid-edit. */}
+              <div className="flex items-center gap-2">
+                <span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">{t('flxp.txFilter')}</span>
+                {(() => {
+                  const editTX = (patch: Partial<FlexState>) => { hold.current['tx_filter_low'] = Date.now() + 8000; hold.current['tx_filter_high'] = Date.now() + 8000; setSt((p) => ({ ...p, ...patch })); };
+                  const commitTX = () => { hold.current['tx_filter_low'] = Date.now() + 900; hold.current['tx_filter_high'] = Date.now() + 900; FlexSetTXFilter(st.tx_filter_low || 0, st.tx_filter_high || 0).catch(() => {}); };
+                  const inp = 'w-[70px] h-8 rounded-md border border-input bg-background px-2 text-xs font-mono tabular-nums disabled:opacity-40';
+                  return (<>
+                    <input type="number" step={50} min={0} disabled={off} value={st.tx_filter_low || 0} className={inp}
+                      onChange={(e) => editTX({ tx_filter_low: parseInt(e.target.value, 10) || 0 })}
+                      onBlur={commitTX} onKeyDown={(e) => { if (e.key === 'Enter') { (e.target as HTMLInputElement).blur(); } }} />
+                    <span className="text-muted-foreground text-xs">–</span>
+                    <input type="number" step={50} min={0} disabled={off} value={st.tx_filter_high || 0} className={inp}
+                      onChange={(e) => editTX({ tx_filter_high: parseInt(e.target.value, 10) || 0 })}
+                      onBlur={commitTX} onKeyDown={(e) => { if (e.key === 'Enter') { (e.target as HTMLInputElement).blur(); } }} />
+                    <span className="text-[10px] text-muted-foreground/70 font-mono">Hz</span>
+                  </>);
+                })()}
+              </div>
+              {/* Mic profile — SmartSDR named mic-EQ/processor presets. */}
+              {!!st.mic_profiles && st.mic_profiles.length > 0 && (
+                <div className="flex items-center gap-2">
+                  <span className="w-14 shrink-0 text-[11px] font-bold text-muted-foreground">{t('flxp.micProfile')}</span>
+                  <select disabled={off} value={st.mic_profile || ''}
+                    onChange={(e) => { const v = e.target.value; hold.current['mic_profile'] = Date.now() + 2000; setSt((p) => ({ ...p, mic_profile: v })); FlexSetMicProfile(v).catch(() => {}); }}
+                    className="flex-1 min-w-0 h-8 rounded-md border border-input bg-background px-2 text-xs">
+                    {!st.mic_profiles.includes(st.mic_profile || '') && <option value="">—</option>}
+                    {st.mic_profiles.map((p) => <option key={p} value={p}>{p}</option>)}
+                  </select>
+                </div>
+              )}
             </div>
             ) : (
             /* CW keyer controls (replace VOX/PROC/MIC when the slice is in CW). */
@@ -464,6 +578,10 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
               <LevelRow label="NB" on={st.nb} disabled={rxOff} value={st.nb_level} accent="amber" sliderAccent="#d97706"
                 onToggle={() => change('nb', !st.nb, () => FlexSetNB(!st.nb))}
                 onLevel={(v) => change('nb_level', v, () => FlexSetNBLevel(v))} />
+              {/* WNB — wideband noise blanker (the extra hardware NR the Flex has). */}
+              <LevelRow label="WNB" on={st.wnb} disabled={rxOff} value={st.wnb_level} accent="amber" sliderAccent="#f59e0b"
+                onToggle={() => change('wnb', !st.wnb, () => FlexSetWNB(!st.wnb))}
+                onLevel={(v) => change('wnb_level', v, () => FlexSetWNBLevel(v))} />
               <LevelRow label="NR" on={st.nr} disabled={rxOff} value={st.nr_level} accent="cyan" sliderAccent="#0891b2"
                 onToggle={() => change('nr', !st.nr, () => FlexSetNR(!st.nr))}
                 onLevel={(v) => change('nr_level', v, () => FlexSetNRLevel(v))} />
@@ -560,71 +678,29 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                 <span className="px-2 py-1 rounded bg-danger-muted text-danger-muted-foreground text-xs font-bold">{t('flxp.fault')}: {st.amp_fault}</span>
               )}
             </div>
-          </Card>
+            {/* Amplifier meters (FWD / ID / TEMP) — moved here from the Meters card
-        )}
+                and shown compact so they sit with the amp controls. */}
-
-        {/* Live meters (UDP VITA-49 stream) */}
-        <Card icon={Gauge} title={t('flxp.meters')}>
             {(() => {
               const meters = st.meters || [];
-            if (off || meters.length === 0) {
-              return <p className="text-[11px] text-muted-foreground text-center py-2">{t('flxp.noMeters')}</p>;
-            }
-            const isDbm = (m?: Meter) => !!m && /dbm/i.test(m.unit || '');
               const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
-            // Radio meters (exclude the amplifier's, which we show separately).
-            const radio = (name: string) => meters.find((m) =>
-              (m.name || '').toUpperCase().includes(name) && !(m.src || '').toUpperCase().includes('AMP'));
-            const sig = radio('LEVEL') || radio('SIGNAL');
-            const fwd = radio('FWDPWR');
-            const swr = radio('SWR');
               const amp = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
                 && !/^(RL|DRV)$/i.test((m.name || '').trim()));
-            const accentFor = (m: Meter) => /swr/i.test(`${m.unit}${m.name}`) ? '#dc2626'
+              if (off || amp.length === 0) return null;
-              : /temp|degc|degf/i.test(`${m.unit}${m.name}`) ? '#ea580c'
-              : /volt/i.test(m.unit || '') ? '#2563eb' : '#16a34a';
-            // S-meter: dBm → S-units (S9 = -73 dBm on HF, 6 dB per unit).
-            const sUnit = (dbm: number) => {
-              const sv = (dbm + 127) / 6; // S0 = -127 dBm
-              if (sv >= 9) {
-                const over = Math.max(0, Math.round(dbm + 73)); // dB over S9
-                return { display: over > 0 ? `S9+${over}` : 'S9', bar: sv, s: 9, over };
-              }
-              return { display: `S${Math.max(0, Math.round(sv))}`, bar: Math.max(0, sv), s: Math.max(0, sv), over: 0 };
-            };
-            const cur = [
-              sig && (() => { const dbm = peakHold('s', sig.value); const s = sUnit(dbm); return (
-                <MeterBar key="s" label="S-METER" value={s.bar} lo={0} hi={19} accent="#16a34a" display={s.display} extra={`${dbm.toFixed(1)} dBm`}
-                  title={onReportRST ? t('rst.clickToFill') : undefined}
-                  onClick={onReportRST ? () => onReportRST(sMeterRST(s.s, s.over, st.mode)) : undefined}
-                  segColor={(fr) => { const sval = fr * 19; return sval < 9 ? '#16a34a' : sval < 12.33 ? '#f59e0b' : '#dc2626'; }} />
-              ); })(),
-              fwd && (() => { const w = peakHold('p', isDbm(fwd) ? dbmToW(fwd.value) : fwd.value); return (
-                <MeterBar key="p" label="PWR" unit="W" lo={0} hi={120} accent="#dc2626"
-                  value={w} extra={isDbm(fwd) ? `${fwd.value.toFixed(1)} dBm` : undefined} />
-              ); })(),
-              swr && <MeterBar key="w" label="SWR" value={peakHold('w', swr.value)} unit="" lo={1} hi={3} accent="#d97706" />,
-            ].filter(Boolean);
               return (
-              <>
+                <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
-                <div className="grid grid-cols-2 sm:grid-cols-3 gap-2">{cur}</div>
-                {amp.length > 0 && (
-                  <div className="border-t border-border/60 pt-2 mt-1">
-                    <div className="text-[10px] font-bold tracking-wider text-muted-foreground mb-1.5">{t('flxp.amplifierHdr')}</div>
-                    <div className="grid grid-cols-2 sm:grid-cols-3 gap-2">
                   {amp.map((m) => {
-                        if (/fwd|pwr/i.test(m.name || '') && isDbm(m)) {
+                    if (/fwd|pwr/i.test(m.name || '') && /dbm/i.test(m.unit || '')) {
-                          return <MeterBar key={m.id} label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, dbmToW(m.value))} unit="W" lo={0} hi={2000} accent="#dc2626" extra={`${m.value.toFixed(1)} dBm`} />;
+                      return <MeterBar key={m.id} compact label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, dbmToW(m.value))} unit="W" lo={0} hi={2000} accent="#dc2626" />;
                     }
-                        return <MeterBar key={m.id} label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, m.value)} unit={m.unit} lo={m.lo} hi={m.hi} accent={accentFor(m)} />;
+                    const acc = /temp|degc|degf/i.test(`${m.unit}${m.name}`) ? '#ea580c' : /volt/i.test(m.unit || '') ? '#2563eb' : '#16a34a';
+                    return <MeterBar key={m.id} compact label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, m.value)} unit={m.unit} lo={m.lo} hi={m.hi} accent={acc} />;
                   })}
                 </div>
-                  </div>
-                )}
-              </>
               );
             })()}
           </Card>
+        )}
+
       </div>
     </div>
   );

frontend/src/components/IcomPanel.tsx

@@ -58,6 +58,21 @@ const BANDS: { l: string; hz: number }[] = [
 // SSB by frequency and the rig's data variant for digital modes.
 const MODES = ['SSB', 'CW', 'RTTY', 'PSK', 'AM', 'FM'];
 
+// Attenuator steps are MODEL-dependent even though the CI-V command (0x11) is the
+// same: the value byte is the dB. The IC-7610 (and 7700/7800/7851) have a 6/12/18
+// dB stepped attenuator; the IC-7300/705/7100 have a single 20 dB attenuator; the
+// IC-9700 a single 10 dB. Offering the wrong steps = a dead button (the rig NAKs
+// e.g. 6 dB on a 7300). Default to the common single 20 dB for unknown models.
+function attOptions(model?: string): { v: string; l: string }[] {
+  const m = (model ?? '').toUpperCase();
+  const OFF = { v: '0', l: 'OFF' };
+  if (/(7610|7700|7800|7850|7851)/.test(m)) {
+    return [OFF, { v: '6', l: '6dB' }, { v: '12', l: '12dB' }, { v: '18', l: '18dB' }];
+  }
+  if (m.includes('9700')) return [OFF, { v: '10', l: '10dB' }];
+  return [OFF, { v: '20', l: '20dB' }]; // IC-7300 / IC-705 / IC-7100 / default
+}
+
 // fmtVFO renders a Hz frequency the way an Icom front panel does:
 // MHz "." 3-digit-kHz "." 2-digit-(10 Hz). 21032000 → "21.032.00".
 function fmtVFO(hz?: number): string {
@@ -534,7 +549,7 @@ function ScopePanadapter() {
 // Unlike the Flex (which pushes state), the Icom is polled: meters/TX state are
 // read every cache cycle; DSP set-controls are optimistic and reconcile on the
 // next poll. Front-panel knob changes for DSP show after ↻ Refresh.
-export function IcomPanel({ onReportRST }: { onReportRST?: (rst: string) => void } = {}) {
+export function IcomPanel({ onReportRST, isNetwork = false }: { onReportRST?: (rst: string) => void; isNetwork?: boolean } = {}) {
   const { t } = useI18n();
   const [st, setSt] = useState<IcomState>(ZERO);
   const [cat, setCat] = useState<any>(null); // RigState (freq/mode/split) for the VFO display
@@ -637,8 +652,12 @@ export function IcomPanel({ onReportRST }: { onReportRST?: (rst: string) => void
           {st.split ? <span className="rounded-md bg-warning/20 px-1.5 py-0.5 text-[10px] font-bold uppercase tracking-wider text-warning">Split</span> : null}
         </div>
         <div className="flex items-center gap-1.5">
-          {/* Radio power ON / OFF. Manual by design — the app never wakes the rig
+          {/* Radio power ON / OFF — NETWORK only. Over USB the CI-V interface is
-              on connect; ON sends the wake preamble then the rig boots ~15 s. */}
+              unpowered while the rig is off, so power-ON can't reach it (OFF works
+              but ON doesn't); hiding both avoids a dead button. On the network the
+              rig's LAN server stays alive in standby, so both work. */}
+          {isNetwork && (
+            <>
               <button type="button" onClick={() => IcomSetPower(true).catch(() => {})} title={t('icmp.powerOnHint')}
                 className="inline-flex items-center gap-1 rounded-md border border-success/60 bg-success/10 px-2 py-1 text-xs font-bold text-success hover:bg-success/20">
                 <Power className="size-3.5" /> ON
@@ -647,6 +666,8 @@ export function IcomPanel({ onReportRST }: { onReportRST?: (rst: string) => void
                 className="inline-flex items-center gap-1 rounded-md border border-destructive/60 bg-destructive/10 px-2 py-1 text-xs font-bold text-destructive hover:bg-destructive/20">
                 <Power className="size-3.5" /> OFF
               </button>
+            </>
+          )}
         </div>
       </div>
 
@@ -804,7 +825,7 @@ export function IcomPanel({ onReportRST }: { onReportRST?: (rst: string) => void
             onChange={(v) => set({ preamp: parseInt(v) }, () => IcomSetPreamp(parseInt(v)))} />
         </Row>
         <Row label="Att">
-          <Segmented value={String(st.att)} options={[{ v: '0', l: 'OFF' }, { v: '6', l: '6dB' }, { v: '12', l: '12dB' }, { v: '18', l: '18dB' }]}
+          <Segmented value={String(st.att)} options={attOptions(cat?.rig)}
             onChange={(v) => set({ att: parseInt(v) }, () => IcomSetAtt(parseInt(v)))} />
         </Row>
         <Row label={t('icmp.filter')}>

frontend/src/components/QSOEditModal.tsx

@@ -351,7 +351,7 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
 
   return (
     <Dialog open onOpenChange={(o) => { if (!o) onClose(); }}>
-      <DialogContent className="max-w-4xl max-h-[92vh] grid grid-rows-[auto_1fr_auto] gap-0 p-0">
+      <DialogContent className="max-w-5xl max-h-[92vh] grid grid-rows-[auto_1fr_auto] gap-0 p-0">
         <DialogHeader className="flex-row items-baseline gap-2">
           <DialogTitle>{t('qedit.title')}</DialogTitle>
           <span className="font-mono text-xs text-muted-foreground">#{draft.id} — {draft.callsign}</span>

frontend/src/components/RecentQSOsGrid.tsx

@@ -274,6 +274,12 @@ export function RecentQSOsGrid({ rows, selectAllSignal, onRowDoubleClicked, onRo
       headerTooltip: t('rqg.awardTip', { name: a.name }),
       width: 110,
       cellClass: 'text-[11px]',
+      // Hidden by DEFAULT (award columns are opt-in). Without this, AG Grid shows
+      // them whenever the saved column state doesn't cover them — a newly-added
+      // award, an empty cache, or a rebuild that runs before the saved state is
+      // re-applied — which is why "all award columns" kept reappearing. The user's
+      // saved state (a column they explicitly showed) still overrides this.
+      hide: true,
       valueGetter: (p) => (p.data as any)?.award_refs?.[a.code.toUpperCase()] ?? '',
     }));
     return [...base, ...awards];

frontend/src/components/SettingsModal.tsx

@@ -21,6 +21,8 @@ import {
   GetEmailSettings, SaveEmailSettings, TestEmail,
   QSLGetEmailTemplates, QSLSaveEmailTemplates,
   GetDVKMessages, SetDVKLabel, DVKStartRecord, DVKStopRecord, DVKPreview, DVKStop, GetDVKStatus,
+  AudioStartMonitor, AudioStopMonitor, AudioMonitorActive,
+  AudioStartTX, AudioStopTX, AudioTXActive,
   ListClusterServers, SaveClusterServer, DeleteClusterServer,
   GetClusterAutoConnect, SetClusterAutoConnect,
   ConnectClusterServer, DisconnectClusterServer,
@@ -759,6 +761,20 @@ function FlexBandAntennasPanel({ bands }: { bands: string[] }) {
   );
 }
 
+// Known Icom models paired with their FACTORY default CI-V address. Picking a
+// model sets icom_addr so the backend identifies it (civ.ModelName) and the UI
+// adapts (e.g. the attenuator steps differ by model). Keep in lockstep with
+// civ.ModelName in internal/cat/civ/civ.go. `addr` is decimal.
+const ICOM_MODELS: { name: string; addr: number }[] = [
+  { name: 'IC-705', addr: 0xA4 },
+  { name: 'IC-7300', addr: 0x94 },
+  { name: 'IC-7610', addr: 0x98 },
+  { name: 'IC-7700', addr: 0x88 },
+  { name: 'IC-7800', addr: 0x80 },
+  { name: 'IC-9100', addr: 0x7C },
+  { name: 'IC-9700', addr: 0xA2 },
+];
+
 export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChanged, flexAvailable, icomAvailable }: Props) {
   const { t } = useI18n();
   const [selected, setSelected] = useState<SectionId>((initialSection as SectionId) || 'station');
@@ -796,7 +812,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   const [modeDraft, setModeDraft] = useState('');
   const [catCfg, setCatCfg] = useState<CATSettings>({
     enabled: false, backend: 'omnirig', omnirig_rig: 1, flex_host: '', flex_port: 4992, flex_spots: false,
-    icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '',
+    icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0,
     digital_default: 'FT8',
   });
@@ -863,6 +879,24 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   const [dvkMsgs, setDvkMsgs] = useState<DVKMsg[]>([]);
   const [dvkStat, setDvkStat] = useState<DVKStat>({ recording: false, playing: false, rec_slot: 0 });
   const [dvkErr, setDvkErr] = useState('');
+  const [monitorOn, setMonitorOn] = useState(false);
+  const [txOn, setTxOn] = useState(false);
+  useEffect(() => {
+    AudioMonitorActive().then(setMonitorOn).catch(() => {});
+    AudioTXActive().then(setTxOn).catch(() => {});
+  }, []);
+  const toggleMonitor = async () => {
+    try {
+      if (monitorOn) { await AudioStopMonitor(); setMonitorOn(false); }
+      else { await AudioStartMonitor(); setMonitorOn(true); }
+    } catch (err: any) { setDvkErr(String(err?.message ?? err)); }
+  };
+  const toggleTX = async () => {
+    try {
+      if (txOn) { await AudioStopTX(); setTxOn(false); }
+      else { await AudioStartTX(); setTxOn(true); }
+    } catch (err: any) { setDvkErr(String(err?.message ?? err)); }
+  };
 
   // General behaviour prefs (mirrored to the DB so they travel with data/).
   const [autofocusWB, setAutofocusWB] = useState(() => localStorage.getItem('opslog.autofocusWB') !== '0');
@@ -2034,12 +2068,24 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                   </SelectContent>
                 </Select>
               </div>
-              <div className="space-y-1 col-span-2">
+              <div className="space-y-1">
+                <Label>{t('cat.icomModel')}</Label>
+                <Select
+                  value={ICOM_MODELS.find((m) => m.addr === (catCfg.icom_addr ?? 0x98))?.name ?? '_custom'}
+                  onValueChange={(v) => { const m = ICOM_MODELS.find((x) => x.name === v); if (m) setCatCfg((s) => ({ ...s, icom_addr: m.addr })); }}>
+                  <SelectTrigger><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    {ICOM_MODELS.map((m) => <SelectItem key={m.name} value={m.name}>{m.name}</SelectItem>)}
+                    <SelectItem value="_custom">{t('cat.icomModelOther')}</SelectItem>
+                  </SelectContent>
+                </Select>
+              </div>
+              <div className="space-y-1">
                 <Label>{t('cat.civAddr')}</Label>
                 <Input value={(catCfg.icom_addr ?? 0x98).toString(16).toUpperCase().padStart(2, '0')}
                   onChange={(e) => { const n = parseInt(e.target.value.replace(/[^0-9a-fA-F]/g, ''), 16); setCatCfg((s) => ({ ...s, icom_addr: (n >= 0 && n <= 0xFF) ? n : s.icom_addr })); }} />
-                <p className="text-xs text-muted-foreground">{t('cat.civHint')}</p>
               </div>
+              <p className="col-span-2 text-xs text-muted-foreground">{t('cat.civHint')}</p>
             </>
             )}
             {catCfg.backend === 'icom-net' && (
@@ -2049,6 +2095,18 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                 <Input placeholder="192.168.1.60" value={catCfg.icom_net_host ?? ''}
                   onChange={(e) => setCatCfg((s) => ({ ...s, icom_net_host: e.target.value }))} />
               </div>
+              <div className="space-y-1">
+                <Label>{t('cat.icomModel')}</Label>
+                <Select
+                  value={ICOM_MODELS.find((m) => m.addr === (catCfg.icom_addr ?? 0x98))?.name ?? '_custom'}
+                  onValueChange={(v) => { const m = ICOM_MODELS.find((x) => x.name === v); if (m) setCatCfg((s) => ({ ...s, icom_addr: m.addr })); }}>
+                  <SelectTrigger><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    {ICOM_MODELS.map((m) => <SelectItem key={m.name} value={m.name}>{m.name}</SelectItem>)}
+                    <SelectItem value="_custom">{t('cat.icomModelOther')}</SelectItem>
+                  </SelectContent>
+                </Select>
+              </div>
               <div className="space-y-1">
                 <Label>{t('cat.civAddr')}</Label>
                 <Input value={(catCfg.icom_addr ?? 0x98).toString(16).toUpperCase().padStart(2, '0')}
@@ -2065,6 +2123,14 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                   onChange={(e) => setCatCfg((s) => ({ ...s, icom_net_pass: e.target.value }))} />
               </div>
               <p className="col-span-2 text-xs text-muted-foreground">{t('cat.icomNetHint')}</p>
+              <label className="col-span-2 flex items-start gap-2 text-sm cursor-pointer">
+                <Checkbox checked={!!(catCfg as any).icom_net_audio}
+                  onCheckedChange={(c) => setCatCfg((s) => ({ ...s, icom_net_audio: !!c } as any))} />
+                <span>
+                  {t('cat.icomNetAudio')}
+                  <span className="block text-[11px] text-muted-foreground">{t('cat.icomNetAudioHint')}</span>
+                </span>
+              </label>
             </>
             )}
             {catCfg.backend === 'tci' && (
@@ -3747,6 +3813,40 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
             <strong>From Radio</strong> = what you receive (used by the QSO recorder).{' '}
             <strong>To Radio</strong> = where voice-keyer messages are transmitted.
           </p>
+          <div className="flex items-center gap-3">
+            <Button
+              variant={monitorOn ? 'default' : 'outline'}
+              size="sm"
+              className="h-8"
+              onClick={toggleMonitor}
+              disabled={!monitorOn && !audioCfg.from_radio}
+              title="Hear the rig's RX audio (From Radio) through your Listening device"
+            >
+              {monitorOn ? '■ Stop listening' : '▶ Listen to radio'}
+            </Button>
+            <span className="text-[11px] text-muted-foreground">
+              {monitorOn
+                ? 'RX monitor running — From Radio → Listening device.'
+                : 'Live-monitor the rig here (USB codec now; network audio later).'}
+            </span>
+          </div>
+          <div className="flex items-center gap-3">
+            <Button
+              variant={txOn ? 'destructive' : 'outline'}
+              size="sm"
+              className="h-8"
+              onClick={toggleTX}
+              disabled={!txOn && !audioCfg.to_radio}
+              title="Key PTT and pipe your live mic into the rig (To Radio device)"
+            >
+              {txOn ? '■ Stop talking (TX)' : '🎙 Talk to radio (TX)'}
+            </Button>
+            <span className="text-[11px] text-muted-foreground">
+              {txOn
+                ? 'TRANSMITTING — mic → To Radio, PTT keyed. Click to stop.'
+                : 'Live mic → rig with PTT (USB now; network TX later).'}
+            </span>
+          </div>
         </div>
 
         <div className="border-t border-border/60 pt-3 space-y-3 max-w-2xl">

frontend/src/lib/i18n.tsx

@@ -134,8 +134,10 @@ const en: Dict = {
   'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig (any rig, Windows COM)', 'cat.optFlex': 'FlexRadio / SmartSDR (native)', 'cat.optIcom': 'Icom CI-V (USB serial)', 'cat.optIcomNet': 'Icom CI-V (network / remote)', 'cat.optTci': 'TCI (Expert Electronics / SunSDR)',
   'cat.icomNetHost': 'Rig IP / hostname', 'cat.icomNetUser': 'Network user (ID)', 'cat.icomNetPass': 'Network password',
   'cat.icomNetHint': "Connects to the rig's built-in LAN server directly — no RS-BA1 or Remote Utility needed (close them first). Use the Network User1 ID/Password set in the rig's Network menu. A rig in standby is powered on automatically.",
+  'cat.icomNetAudio': 'Stream RX audio over the network (experimental)',
+  'cat.icomNetAudioHint': 'Play the rig’s received audio through your Listening device (Settings → Audio) over the 50003 stream. Experimental — the audio framing is pending on-rig verification; leave off if control misbehaves.',
   'cat.omnirigRig': 'OmniRig rig slot', 'cat.flexIp': 'FlexRadio IP', 'cat.port': 'Port', 'cat.flexSpots': 'Show cluster spots on the panadapter', 'cat.flexSpotsHint': "(spots from OpsLog's DX cluster appear on the radio, auto-expire after 30 min)",
-  'cat.icomPort': 'Icom CI-V port', 'cat.selectCom': 'Select COM port', 'cat.noPorts': 'No ports found', 'cat.baud': 'Baud rate', 'cat.civAddr': 'CI-V address (hex)', 'cat.civHint': 'IC-7610 = 98, IC-7300 = 94, IC-9700 = A2, IC-705 = A4. Set "CI-V USB Echo Back" OFF and CI-V baud to match on the rig.',
+  'cat.icomPort': 'Icom CI-V port', 'cat.selectCom': 'Select COM port', 'cat.noPorts': 'No ports found', 'cat.baud': 'Baud rate', 'cat.icomModel': 'Rig model', 'cat.icomModelOther': 'Other (custom address)', 'cat.civAddr': 'CI-V address (hex)', 'cat.civHint': 'Pick your model to set the CI-V address automatically (or choose "Other" and type it). Set "CI-V USB Echo Back" OFF and CI-V baud to match on the rig.',
   'cat.tciHost': 'TCI host', 'cat.tciHint': 'Enable the TCI server in ExpertSDR2/EESDR (Options → TCI). Default port 40001. Use 127.0.0.1 when OpsLog runs on the same PC.', 'cat.tciSpots': 'Show cluster spots on the panorama', 'cat.tciSpotsHint': "(spots from OpsLog's DX cluster appear on the SDR panadapter)",
   'cat.pollMs': 'Poll interval (ms)', 'cat.delayMs': 'CAT delay (ms)', 'cat.digitalDefault': 'Default digital mode (when rig reports DIG)', 'cat.modeBeforeFreq': 'Set mode before frequency', 'cat.modeBeforeFreqHint': '(older rigs that drop the mode after a band change)',
   'cat.omnirigHint': 'Configure your rig (COM port, baud rate, model) in OmniRig\'s own settings GUI first. OpsLog will read whichever Rig slot you select here. Set CAT delay above 0 if your rig drops commands sent back-to-back (some older Kenwood/Yaesu). OmniRig only reports generic "DIG" for digital modes — Default digital mode is the specific mode OpsLog will surface (and log).',
@@ -191,9 +193,9 @@ const en: Dict = {
   'wkp.breakIn': 'Break-in', 'wkp.breakInHint': "The rig's CW keyer only transmits when break-in is SEMI or FULL. OFF keys the sidetone but stays in receive.", 'wkp.bkOff': 'OFF', 'wkp.bkOffWarn': "won't transmit — set SEMI or FULL",
   'wkp.autoCallHint': 'Click a CQ macro (one whose text contains CQ) to resend it on a loop — message, gap, repeat — until you send another macro (e.g. a report), press Stop, or hit ESC. Non-CQ macros send once.', 'wkp.autoCall': 'Auto-call', 'wkp.gap': 'gap', 'wkp.gapHint': 'Seconds to wait after the message before resending', 'wkp.loopHint': 'click a CQ macro to loop it', 'wkp.macroN': 'Macro {n}',
   'dvkp.voiceKeyer': 'Voice keyer', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Disable voice keyer', 'dvkp.noMsgPre': 'No messages recorded yet. Open', 'dvkp.settingsPath': 'Settings → Audio devices & voice keyer', 'dvkp.noMsgPost': 'to record F1–F6.', 'dvkp.transmit': 'Transmit F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — empty', 'dvkp.message': 'message',
-  'agp.portDeselect': 'Port {letter} — click to deselect', 'agp.portSelect': 'Select on port {letter}', 'agp.online': 'online', 'agp.offline': 'offline', 'agp.close': 'Close', 'agp.connecting': 'Connecting…', 'agp.noAntennas': 'No antennas configured.',
+  'agp.portDeselect': 'Port {letter} — click to deselect', 'agp.portSelect': 'Select on port {letter}', 'agp.online': 'online', 'agp.offline': 'offline', 'agp.close': 'Close', 'agp.connecting': 'Connecting…', 'agp.noAntennas': 'No antennas configured.', 'agp.filterOnHint': 'Showing antennas for {band} only — click to show all bands', 'agp.filterOffHint': 'Showing all antennas — click to show only the current band',
   'flxp.smartsdrRemote': 'SmartSDR remote control', 'flxp.offline': 'OFFLINE', 'flxp.waiting': 'Waiting for the FlexRadio… (set CAT to FlexRadio and connect)', 'flxp.transmit': 'Transmit', 'flxp.rfPower': 'RF Power', 'flxp.tunePwr': 'Tune Pwr', 'flxp.splitHint': 'Split: RX/TX on separate slices. ON creates a TX slice +1 kHz (CW) / +5 kHz (SSB) up, like SmartSDR.', 'flxp.sliceHint': 'Click to make this the active slice — frequency, mode, DSP and spot-clicks all follow it.', 'flxp.txSlice': 'This slice transmits', 'flxp.setTxSlice': 'Move TX to this slice (transmit here)', 'flxp.voxDly': 'VOX Dly', 'flxp.speed': 'Speed', 'flxp.pitch': 'Pitch', 'flxp.delay': 'Delay',
-  'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER',
+  'flxp.receiveActive': 'Receive (active slice)', 'flxp.muted': 'Muted — click to unmute', 'flxp.mute': 'Mute RX audio', 'flxp.filter': 'Filter', 'flxp.amplifier': 'Amplifier', 'flxp.ampInLine': 'Amplifier is in line (transmitting through PA).', 'flxp.ampBypassed': 'Amplifier bypassed (standby).', 'flxp.pgConnected': 'PowerGenius connected', 'flxp.pgOffline': 'PowerGenius offline', 'flxp.fan': 'Fan', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Broadcast', 'flxp.fault': 'FAULT', 'flxp.meters': 'Meters', 'flxp.voltage': 'VOLTAGE', 'flxp.paTemp': 'PA TEMP', 'flxp.txFilter': 'TX filter', 'flxp.micProfile': 'Mic profile', 'flxp.noMeters': "No meters yet — waiting for the radio's UDP stream…", 'flxp.amplifierHdr': 'AMPLIFIER',
   'icmp.spectrum': 'Spectrum', 'icmp.scopeFixed': 'Fixed — double-click / wheel to tune', 'icmp.scopeCenter': 'Center — follows VFO', 'icmp.scopeOff': 'Scope off', 'icmp.scopePanDown': 'Shift scope −50 kHz', 'icmp.scopePanUp': 'Shift scope +50 kHz', 'icmp.scopeCenterVfo': 'Center scope on the current frequency (±50 kHz)', 'icmp.notConnected': "Icom not connected. Enable the Icom CI-V backend in Settings → CAT and connect the radio's USB port.", 'icmp.refresh': 'Refresh', 'icmp.meters': 'Meters', 'icmp.transmit': 'Transmit', 'icmp.power': 'Power', 'icmp.mic': 'Mic', 'icmp.receive': 'Receive', 'icmp.preamp': 'Preamp', 'icmp.filter': 'Filter', 'icmp.noiseNotch': 'Noise / Notch', 'icmp.autoNotch': 'Auto notch filter', 'icmp.apf': 'Audio peak filter (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Wheel or ± to shift · Ctrl+←/→ shifts RIT when active', 'icmp.bandsAntenna': 'Bands & Antenna', 'icmp.antenna': 'Antenna', 'icmp.passband': 'Passband / Notch', 'icmp.pbtCenter': 'Center PBT', 'icmp.manualNotch': 'Manual notch — MN on, then set position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Power the radio ON (boots ~15 s)', 'icmp.powerOffHint': 'Power the radio OFF', 'icmp.powerOffConfirm': 'Switch the radio OFF?',
   'rst.clickToFill': 'Click to set RST tx from the signal',
   'qrz.openTitle': 'Open {call} on QRZ.com',
@@ -327,8 +329,10 @@ const fr: Dict = {
   'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig (tout poste, COM Windows)', 'cat.optFlex': 'FlexRadio / SmartSDR (natif)', 'cat.optIcom': 'Icom CI-V (USB série)', 'cat.optIcomNet': 'Icom CI-V (réseau / remote)', 'cat.optTci': 'TCI (Expert Electronics / SunSDR)',
   'cat.icomNetHost': 'IP / nom d\'hôte du poste', 'cat.icomNetUser': 'Utilisateur réseau (ID)', 'cat.icomNetPass': 'Mot de passe réseau',
   'cat.icomNetHint': "Se connecte directement au serveur LAN intégré du poste — sans RS-BA1 ni Remote Utility (ferme-les d'abord). Utilise l'ID/mot de passe Network User1 configurés dans le menu Network du poste. Un poste en veille est allumé automatiquement.",
+  'cat.icomNetAudio': 'Diffuser l’audio RX par le réseau (expérimental)',
+  'cat.icomNetAudioHint': 'Écoute l’audio reçu du poste sur ton périphérique d’écoute (Réglages → Audio) via le flux 50003. Expérimental — le format audio reste à vérifier sur le poste ; laisse désactivé si le contrôle se comporte mal.',
   'cat.omnirigRig': 'Slot OmniRig', 'cat.flexIp': 'IP FlexRadio', 'cat.port': 'Port', 'cat.flexSpots': 'Afficher les spots cluster sur le panadapter', 'cat.flexSpotsHint': "(les spots du cluster DX d'OpsLog apparaissent sur la radio, expirent après 30 min)",
-  'cat.icomPort': 'Port CI-V Icom', 'cat.selectCom': 'Choisir un port COM', 'cat.noPorts': 'Aucun port trouvé', 'cat.baud': 'Débit (baud)', 'cat.civAddr': 'Adresse CI-V (hex)', 'cat.civHint': 'IC-7610 = 98, IC-7300 = 94, IC-9700 = A2, IC-705 = A4. Mets « CI-V USB Echo Back » sur OFF et fais correspondre le débit CI-V sur le poste.',
+  'cat.icomPort': 'Port CI-V Icom', 'cat.selectCom': 'Choisir un port COM', 'cat.noPorts': 'Aucun port trouvé', 'cat.baud': 'Débit (baud)', 'cat.icomModel': 'Modèle de poste', 'cat.icomModelOther': 'Autre (adresse perso)', 'cat.civAddr': 'Adresse CI-V (hex)', 'cat.civHint': 'Choisis ton modèle pour fixer l’adresse CI-V automatiquement (ou « Autre » et saisis-la). Mets « CI-V USB Echo Back » sur OFF et fais correspondre le débit CI-V sur le poste.',
   'cat.tciHost': 'Hôte TCI', 'cat.tciHint': 'Active le serveur TCI dans ExpertSDR2/EESDR (Options → TCI). Port par défaut 40001. Utilise 127.0.0.1 si OpsLog tourne sur le même PC.', 'cat.tciSpots': 'Afficher les spots cluster sur le panorama', 'cat.tciSpotsHint': "(les spots du cluster DX d'OpsLog apparaissent sur le panadapter SDR)",
   'cat.pollMs': 'Intervalle de poll (ms)', 'cat.delayMs': 'Délai CAT (ms)', 'cat.digitalDefault': 'Mode numérique par défaut (quand le poste indique DIG)', 'cat.modeBeforeFreq': 'Régler le mode avant la fréquence', 'cat.modeBeforeFreqHint': '(anciens postes qui perdent le mode après un changement de bande)',
   'cat.omnirigHint': "Configure d'abord ton poste (port COM, débit, modèle) dans l'interface de réglages d'OmniRig. OpsLog lira le slot Rig que tu choisis ici. Mets le délai CAT au-dessus de 0 si ton poste perd des commandes envoyées coup sur coup (certains anciens Kenwood/Yaesu). OmniRig ne rapporte qu'un « DIG » générique pour les modes numériques — le mode numérique par défaut est le mode précis qu'OpsLog affichera (et loggera).",
@@ -378,9 +382,9 @@ const fr: Dict = {
   'wkp.breakIn': 'Break-in', 'wkp.breakInHint': "Le manipulateur interne de la radio n'émet que si le break-in est SEMI ou FULL. OFF génère la tonalité mais reste en réception.", 'wkp.bkOff': 'OFF', 'wkp.bkOffWarn': "n'émettra pas — mettre SEMI ou FULL",
   'wkp.autoCallHint': "Clique une macro CQ (dont le texte contient CQ) pour la réémettre en boucle — message, pause, répétition — jusqu'à envoyer une autre macro (ex. un report), appuyer sur Stop ou ESC. Les macros non-CQ ne sont émises qu'une fois.", 'wkp.autoCall': 'Appel auto', 'wkp.gap': 'pause', 'wkp.gapHint': 'Secondes à attendre après le message avant de réémettre', 'wkp.loopHint': 'clique une macro CQ pour la boucler', 'wkp.macroN': 'Macro {n}',
   'dvkp.voiceKeyer': 'Manipulateur vocal', 'dvkp.stop': 'Stop', 'dvkp.disable': 'Désactiver le manipulateur vocal', 'dvkp.noMsgPre': 'Aucun message enregistré. Ouvre', 'dvkp.settingsPath': 'Réglages → Périphériques audio & manipulateur vocal', 'dvkp.noMsgPost': 'pour enregistrer F1–F6.', 'dvkp.transmit': 'Émettre F{slot}{label} ({dur}s)', 'dvkp.empty': 'F{slot} — vide', 'dvkp.message': 'message',
-  'agp.portDeselect': 'Port {letter} — clic pour désélectionner', 'agp.portSelect': 'Sélectionner sur le port {letter}', 'agp.online': 'en ligne', 'agp.offline': 'hors ligne', 'agp.close': 'Fermer', 'agp.connecting': 'Connexion…', 'agp.noAntennas': 'Aucune antenne configurée.',
+  'agp.portDeselect': 'Port {letter} — clic pour désélectionner', 'agp.portSelect': 'Sélectionner sur le port {letter}', 'agp.online': 'en ligne', 'agp.offline': 'hors ligne', 'agp.close': 'Fermer', 'agp.connecting': 'Connexion…', 'agp.noAntennas': 'Aucune antenne configurée.', 'agp.filterOnHint': 'Antennes du {band} uniquement — clic pour afficher toutes les bandes', 'agp.filterOffHint': 'Toutes les antennes affichées — clic pour n’afficher que la bande courante',
   'flxp.smartsdrRemote': 'Contrôle à distance SmartSDR', 'flxp.offline': 'HORS LIGNE', 'flxp.waiting': 'En attente du FlexRadio… (règle le CAT sur FlexRadio et connecte)', 'flxp.transmit': 'Émission', 'flxp.rfPower': 'Puissance RF', 'flxp.tunePwr': 'Puiss. TUNE', 'flxp.splitHint': 'Split : RX/TX sur des slices séparées. ON crée une slice TX +1 kHz (CW) / +5 kHz (SSB) au-dessus, comme SmartSDR.', 'flxp.sliceHint': 'Cliquer pour rendre cette slice active — fréquence, mode, DSP et clics de spot la suivent tous.', 'flxp.txSlice': 'Cette slice émet', 'flxp.setTxSlice': 'Déplacer le TX sur cette slice (émettre ici)', 'flxp.voxDly': 'Délai VOX', 'flxp.speed': 'Vitesse', 'flxp.pitch': 'Tonalité', 'flxp.delay': 'Délai',
-  'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR',
+  'flxp.receiveActive': 'Réception (slice active)', 'flxp.muted': 'Coupé — clic pour rétablir', 'flxp.mute': "Couper l'audio RX", 'flxp.filter': 'Filtre', 'flxp.amplifier': 'Amplificateur', 'flxp.ampInLine': 'Amplificateur en ligne (émission via le PA).', 'flxp.ampBypassed': 'Amplificateur en bypass (standby).', 'flxp.pgConnected': 'PowerGenius connecté', 'flxp.pgOffline': 'PowerGenius hors ligne', 'flxp.fan': 'Ventilo', 'flxp.fanStandard': 'Standard', 'flxp.fanContest': 'Contest', 'flxp.fanBroadcast': 'Diffusion', 'flxp.fault': 'DÉFAUT', 'flxp.meters': 'Mesures', 'flxp.voltage': 'TENSION', 'flxp.paTemp': 'TEMP PA', 'flxp.txFilter': 'Filtre TX', 'flxp.micProfile': 'Profil micro', 'flxp.noMeters': 'Aucune mesure — en attente du flux UDP de la radio…', 'flxp.amplifierHdr': 'AMPLIFICATEUR',
   'icmp.spectrum': 'Spectre', 'icmp.scopeFixed': 'Fixe — double-clic / molette pour accorder', 'icmp.scopeCenter': 'Centré — suit le VFO', 'icmp.scopeOff': 'Scope éteint', 'icmp.scopePanDown': 'Décaler le scope −50 kHz', 'icmp.scopePanUp': 'Décaler le scope +50 kHz', 'icmp.scopeCenterVfo': 'Centrer le scope sur la fréquence actuelle (±50 kHz)', 'icmp.notConnected': 'Icom non connecté. Active le backend CI-V Icom dans Réglages → CAT et connecte le port USB de la radio.', 'icmp.refresh': 'Rafraîchir', 'icmp.meters': 'Mesures', 'icmp.transmit': 'Émission', 'icmp.power': 'Puissance', 'icmp.mic': 'Micro', 'icmp.receive': 'Réception', 'icmp.preamp': 'Préampli', 'icmp.filter': 'Filtre', 'icmp.noiseNotch': 'Bruit / Notch', 'icmp.autoNotch': 'Filtre notch auto', 'icmp.apf': 'Filtre de pic audio (CW)', 'icmp.clarifiers': 'RIT / ΔTX', 'icmp.ritHint': 'Molette ou ± pour décaler · Ctrl+←/→ décale le RIT si actif', 'icmp.bandsAntenna': 'Bandes & Antenne', 'icmp.antenna': 'Antenne', 'icmp.passband': 'Passe-bande / Notch', 'icmp.pbtCenter': 'Centrer PBT', 'icmp.manualNotch': 'Notch manuel — active MN, puis règle la position', 'icmp.squelch': 'Squelch', 'icmp.powerOnHint': 'Allumer la radio (démarre en ~15 s)', 'icmp.powerOffHint': 'Éteindre la radio', 'icmp.powerOffConfirm': 'Éteindre la radio ?',
   'rst.clickToFill': 'Clic pour remplir le RST tx depuis le signal',
   'qrz.openTitle': 'Ouvrir {call} sur QRZ.com',

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.19.1';
+export const APP_VERSION = '0.19.2';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -36,6 +36,18 @@ export function ApplyAwardPreset(arg1:string,arg2:string):Promise<number>;
 
 export function AssignAwardRefToQSOs(arg1:string,arg2:string,arg3:Array<number>):Promise<number>;
 
+export function AudioMonitorActive():Promise<boolean>;
+
+export function AudioStartMonitor():Promise<void>;
+
+export function AudioStartTX():Promise<void>;
+
+export function AudioStopMonitor():Promise<void>;
+
+export function AudioStopTX():Promise<void>;
+
+export function AudioTXActive():Promise<boolean>;
+
 export function AwardCellQSOs(arg1:string,arg2:string,arg3:string):Promise<Array<qso.QSO>>;
 
 export function AwardFields():Promise<Array<string>>;
@@ -190,6 +202,8 @@ export function FlexSetFilter(arg1:number,arg2:number):Promise<void>;
 
 export function FlexSetMic(arg1:number):Promise<void>;
 
+export function FlexSetMicProfile(arg1:string):Promise<void>;
+
 export function FlexSetMon(arg1:boolean):Promise<void>;
 
 export function FlexSetMonLevel(arg1:number):Promise<void>;
@@ -218,6 +232,8 @@ export function FlexSetSplit(arg1:boolean):Promise<void>;
 
 export function FlexSetTXAntenna(arg1:string):Promise<void>;
 
+export function FlexSetTXFilter(arg1:number,arg2:number):Promise<void>;
+
 export function FlexSetTXSlice(arg1:number):Promise<void>;
 
 export function FlexSetTunePower(arg1:number):Promise<void>;
@@ -228,6 +244,10 @@ export function FlexSetVoxDelay(arg1:number):Promise<void>;
 
 export function FlexSetVoxLevel(arg1:number):Promise<void>;
 
+export function FlexSetWNB(arg1:boolean):Promise<void>;
+
+export function FlexSetWNBLevel(arg1:number):Promise<void>;
+
 export function FlexTune(arg1:boolean):Promise<void>;
 
 export function GetActiveProfile():Promise<profile.Profile>;

frontend/wailsjs/go/main/App.js

@@ -34,6 +34,30 @@ export function AssignAwardRefToQSOs(arg1, arg2, arg3) {
   return window['go']['main']['App']['AssignAwardRefToQSOs'](arg1, arg2, arg3);
 }
 
+export function AudioMonitorActive() {
+  return window['go']['main']['App']['AudioMonitorActive']();
+}
+
+export function AudioStartMonitor() {
+  return window['go']['main']['App']['AudioStartMonitor']();
+}
+
+export function AudioStartTX() {
+  return window['go']['main']['App']['AudioStartTX']();
+}
+
+export function AudioStopMonitor() {
+  return window['go']['main']['App']['AudioStopMonitor']();
+}
+
+export function AudioStopTX() {
+  return window['go']['main']['App']['AudioStopTX']();
+}
+
+export function AudioTXActive() {
+  return window['go']['main']['App']['AudioTXActive']();
+}
+
 export function AwardCellQSOs(arg1, arg2, arg3) {
   return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3);
 }
@@ -342,6 +366,10 @@ export function FlexSetMic(arg1) {
   return window['go']['main']['App']['FlexSetMic'](arg1);
 }
 
+export function FlexSetMicProfile(arg1) {
+  return window['go']['main']['App']['FlexSetMicProfile'](arg1);
+}
+
 export function FlexSetMon(arg1) {
   return window['go']['main']['App']['FlexSetMon'](arg1);
 }
@@ -398,6 +426,10 @@ export function FlexSetTXAntenna(arg1) {
   return window['go']['main']['App']['FlexSetTXAntenna'](arg1);
 }
 
+export function FlexSetTXFilter(arg1, arg2) {
+  return window['go']['main']['App']['FlexSetTXFilter'](arg1, arg2);
+}
+
 export function FlexSetTXSlice(arg1) {
   return window['go']['main']['App']['FlexSetTXSlice'](arg1);
 }
@@ -418,6 +450,14 @@ export function FlexSetVoxLevel(arg1) {
   return window['go']['main']['App']['FlexSetVoxLevel'](arg1);
 }
 
+export function FlexSetWNB(arg1) {
+  return window['go']['main']['App']['FlexSetWNB'](arg1);
+}
+
+export function FlexSetWNBLevel(arg1) {
+  return window['go']['main']['App']['FlexSetWNBLevel'](arg1);
+}
+
 export function FlexTune(arg1) {
   return window['go']['main']['App']['FlexTune'](arg1);
 }

frontend/wailsjs/go/models.ts

@@ -117,6 +117,7 @@ export namespace antgenius {
 	export class Antenna {
 	    index: number;
 	    name: string;
+	    bands: number;
 	
 	    static createFrom(source: any = {}) {
 	        return new Antenna(source);
@@ -126,6 +127,7 @@ export namespace antgenius {
 	        if ('string' === typeof source) source = JSON.parse(source);
 	        this.index = source["index"];
 	        this.name = source["name"];
+	        this.bands = source["bands"];
 	    }
 	}
 	export class Status {
@@ -583,6 +585,10 @@ export namespace cat {
 	    mon: boolean;
 	    mon_level: number;
 	    mic_level: number;
+	    tx_filter_low: number;
+	    tx_filter_high: number;
+	    mic_profile?: string;
+	    mic_profiles?: string[];
 	    atu_status?: string;
 	    atu_memories: boolean;
 	    rx_avail: boolean;
@@ -603,6 +609,8 @@ export namespace cat {
 	    nr_level: number;
 	    anf: boolean;
 	    anf_level: number;
+	    wnb: boolean;
+	    wnb_level: number;
 	    mode?: string;
 	    cw_speed: number;
 	    cw_pitch: number;
@@ -640,6 +648,10 @@ export namespace cat {
 	        this.mon = source["mon"];
 	        this.mon_level = source["mon_level"];
 	        this.mic_level = source["mic_level"];
+	        this.tx_filter_low = source["tx_filter_low"];
+	        this.tx_filter_high = source["tx_filter_high"];
+	        this.mic_profile = source["mic_profile"];
+	        this.mic_profiles = source["mic_profiles"];
 	        this.atu_status = source["atu_status"];
 	        this.atu_memories = source["atu_memories"];
 	        this.rx_avail = source["rx_avail"];
@@ -660,6 +672,8 @@ export namespace cat {
 	        this.nr_level = source["nr_level"];
 	        this.anf = source["anf"];
 	        this.anf_level = source["anf_level"];
+	        this.wnb = source["wnb"];
+	        this.wnb_level = source["wnb_level"];
 	        this.mode = source["mode"];
 	        this.cw_speed = source["cw_speed"];
 	        this.cw_pitch = source["cw_pitch"];
@@ -1349,6 +1363,7 @@ export namespace main {
 	    icom_net_host: string;
 	    icom_net_user: string;
 	    icom_net_pass: string;
+	    icom_net_audio: boolean;
 	    tci_host: string;
 	    tci_port: number;
 	    tci_spots: boolean;
@@ -1374,6 +1389,7 @@ export namespace main {
 	        this.icom_net_host = source["icom_net_host"];
 	        this.icom_net_user = source["icom_net_user"];
 	        this.icom_net_pass = source["icom_net_pass"];
+	        this.icom_net_audio = source["icom_net_audio"];
 	        this.tci_host = source["tci_host"];
 	        this.tci_port = source["tci_port"];
 	        this.tci_spots = source["tci_spots"];

internal/antgenius/antgenius.go

@@ -32,9 +32,13 @@ const (
 )
 
 // Antenna is one configured antenna (index + name as stored on the device).
+// Bands is the device's band bitmask for the antenna (which bands it covers);
+// 0 = unknown/all. The UI uses it to show only band-appropriate antennas, like
+// the native 4O3A app.
 type Antenna struct {
 	Index int    `json:"index"`
 	Name  string `json:"name"`
+	Bands int    `json:"bands"`
 }
 
 // Status is the snapshot the UI renders.
@@ -65,6 +69,8 @@ type Client struct {
 	statusMu sync.RWMutex
 	status   Status
 	antennas map[int]string // index → name (rebuilt into status.Antennas)
+	antBands map[int]int    // index → band bitmask (which bands the antenna covers)
+	antRawN  int            // one-shot: how many raw antenna lines we've logged
 
 	stop    chan struct{}
 	running bool
@@ -80,6 +86,7 @@ func New(host string, port int, password string) *Client {
 		password: strings.TrimSpace(password),
 		stop:     make(chan struct{}),
 		antennas: map[int]string{},
+		antBands: map[int]int{},
 		status:   Status{Host: host},
 	}
 }
@@ -356,13 +363,24 @@ func (c *Client) parseAntenna(msg string) {
 		// The device stores spaces as underscores in names.
 		name = strings.TrimSpace(strings.ReplaceAll(name, "_", " "))
 	}
+	// Band bitmask: which bands this antenna is configured for. The device sends
+	// it as "band=<mask>" (a bitmask). Kept so the UI can show only band-relevant
+	// antennas (like the native app). Log the first few raw antenna lines so the
+	// exact field name + bit values can be confirmed on real hardware.
+	bands := kvInt(msg, "band")
 	c.statusMu.Lock()
+	if c.antRawN < 8 {
+		c.antRawN++
+		applog.Printf("antgenius: antenna raw #%d: %q (parsed band mask=%d/0x%X)", c.antRawN, msg, bands, bands)
+	}
 	if name != "" && !isPlaceholderName(name) {
 		c.antennas[id] = name
+		c.antBands[id] = bands
 	} else {
 		delete(c.antennas, id) // unconfigured slot ("Antenna 4", etc.) → not shown
+		delete(c.antBands, id)
 	}
-	c.status.Antennas = sortedAntennas(c.antennas)
+	c.status.Antennas = sortedAntennas(c.antennas, c.antBands)
 	c.status.Connected = true
 	c.statusMu.Unlock()
 }
@@ -431,10 +449,10 @@ func isPlaceholderName(name string) bool {
 	return err == nil
 }
 
-func sortedAntennas(m map[int]string) []Antenna {
+func sortedAntennas(m map[int]string, bands map[int]int) []Antenna {
 	out := make([]Antenna, 0, len(m))
 	for idx, name := range m {
-		out = append(out, Antenna{Index: idx, Name: name})
+		out = append(out, Antenna{Index: idx, Name: name, Bands: bands[idx]})
 	}
 	sort.Slice(out, func(i, j int) bool { return out[i].Index < out[j].Index })
 	return out

internal/audio/codec.go

@@ -0,0 +1,57 @@
+package audio
+
+import "fmt"
+
+// Codec converts between the wire payload of a network audio stream (Icom 50003)
+// and OpsLog's internal PCM (16 kHz mono 16-bit little-endian — the format the
+// capture/render engine and the pcmRing use). It exists so the transport code
+// (icomaudio.go) never hard-codes a format: today PCM is an identity passthrough;
+// tomorrow an Opus codec implements the same two methods and drops in unchanged.
+// This mirrors how civTransport abstracts the CAT byte stream from its transport.
+type Codec interface {
+	// Name is a short label for logs/UI.
+	Name() string
+	// Decode turns one received audio payload into internal PCM. The returned
+	// slice is freshly allocated (the caller may retain it).
+	Decode(payload []byte) ([]byte, error)
+	// Encode turns internal PCM into a payload to transmit.
+	Encode(pcm []byte) ([]byte, error)
+}
+
+// pcm16Codec is the uncompressed 16-bit-PCM codec — the Icom "uncompressed"
+// audio mode (rxcodec/txcodec in the conninfo). Icom sends little-endian 16-bit
+// mono samples, which is byte-for-byte OpsLog's internal format, so decode/encode
+// are copies. It is the Phase-4/5 default: zero-dependency, lossless, ideal on a
+// LAN. Opus (for WAN/internet bandwidth) becomes another Codec later.
+//
+// NOTE: rate conversion is deliberately NOT this layer's job. The Icom RX audio
+// is 16 kHz = our internal rate, so RX needs none. The rig's TX side may run at a
+// different rate (the captured conninfo showed 8 kHz) — Phase 5 will resample in
+// the TX path before Encode; keeping the codec rate-agnostic keeps that concern
+// in one place.
+type pcm16Codec struct{}
+
+// NewPCM16Codec returns the uncompressed 16-bit PCM codec.
+func NewPCM16Codec() Codec { return pcm16Codec{} }
+
+func (pcm16Codec) Name() string { return "pcm16" }
+
+func (pcm16Codec) Decode(payload []byte) ([]byte, error) {
+	// Icom PCM payloads are whole 16-bit samples; an odd length means a truncated
+	// packet — trim the stray byte rather than emit a half-sample click.
+	n := len(payload) &^ 1
+	if n != len(payload) {
+		if n == 0 {
+			return nil, fmt.Errorf("pcm16: payload too short (%d bytes)", len(payload))
+		}
+	}
+	out := make([]byte, n)
+	copy(out, payload[:n])
+	return out, nil
+}
+
+func (pcm16Codec) Encode(pcm []byte) ([]byte, error) {
+	out := make([]byte, len(pcm))
+	copy(out, pcm)
+	return out, nil
+}

internal/audio/codec_test.go

@@ -0,0 +1,37 @@
+package audio
+
+import "testing"
+
+func TestPCM16CodecRoundTrip(t *testing.T) {
+	c := NewPCM16Codec()
+	in := []byte{0x01, 0x02, 0x03, 0x04, 0xff, 0x7f}
+	enc, err := c.Encode(in)
+	if err != nil {
+		t.Fatalf("encode: %v", err)
+	}
+	dec, err := c.Decode(enc)
+	if err != nil {
+		t.Fatalf("decode: %v", err)
+	}
+	if string(dec) != string(in) {
+		t.Fatalf("round-trip mismatch: got % X want % X", dec, in)
+	}
+}
+
+func TestPCM16CodecTrimsOddByte(t *testing.T) {
+	c := NewPCM16Codec()
+	dec, err := c.Decode([]byte{0x10, 0x20, 0x30}) // 3 bytes = 1 sample + stray
+	if err != nil {
+		t.Fatalf("decode: %v", err)
+	}
+	if len(dec) != 2 {
+		t.Fatalf("expected the stray byte trimmed to 2, got %d", len(dec))
+	}
+}
+
+func TestPCM16CodecRejectsSingleByte(t *testing.T) {
+	c := NewPCM16Codec()
+	if _, err := c.Decode([]byte{0x10}); err == nil {
+		t.Fatalf("expected an error for a sub-sample payload")
+	}
+}

internal/audio/engine.go

@@ -5,6 +5,7 @@ package audio
 import (
 	"fmt"
 	"runtime"
+	"sync"
 	"time"
 	"unsafe"
 
@@ -269,3 +270,151 @@ func playPCM(deviceID string, pcm []byte, rate, ch, bits int, stop <-chan struct
 		time.Sleep(10 * time.Millisecond)
 	}
 }
+
+// pcmRing is a thread-safe, latency-bounded FIFO of PCM bytes feeding a live
+// render stream. Producers (a USB-codec capture, or a decoded network audio
+// stream) Push freshly-arrived samples; the render loop Pulls. It is the shared
+// hand-off point between "where the audio comes from" (USB device / UDP 50003)
+// and "where it's heard" (any WASAPI output) — so the transport can be swapped
+// without touching the render side, mirroring the civTransport split on the CAT
+// side. On overflow the oldest audio is dropped to keep latency bounded; on
+// underrun Pull simply returns short and the render loop pads with silence.
+type pcmRing struct {
+	mu  sync.Mutex
+	buf []byte
+	max int // hard cap in bytes (drops oldest beyond this → bounded latency)
+}
+
+// newPCMRing makes a ring whose backlog is capped at maxBytes. Size it from the
+// acceptable latency: bytesPerSec (=32000) worth ≈ 1 s.
+func newPCMRing(maxBytes int) *pcmRing {
+	if maxBytes <= 0 {
+		maxBytes = bytesPerSec // 1 s default
+	}
+	return &pcmRing{max: maxBytes}
+}
+
+// Push appends samples, dropping the oldest audio if the backlog would exceed
+// the cap (a slow/absent consumer never makes the producer block or grow without
+// bound). A short glitch beats runaway latency for live monitoring.
+func (r *pcmRing) Push(p []byte) {
+	if len(p) == 0 {
+		return
+	}
+	r.mu.Lock()
+	r.buf = append(r.buf, p...)
+	if len(r.buf) > r.max {
+		drop := len(r.buf) - r.max
+		r.buf = append(r.buf[:0], r.buf[drop:]...)
+	}
+	r.mu.Unlock()
+}
+
+// pull removes and returns up to maxBytes of queued PCM (a private copy), or nil
+// when empty. The render loop pads any shortfall with silence.
+func (r *pcmRing) pull(maxBytes int) []byte {
+	r.mu.Lock()
+	defer r.mu.Unlock()
+	if len(r.buf) == 0 || maxBytes <= 0 {
+		return nil
+	}
+	n := maxBytes
+	if n > len(r.buf) {
+		n = len(r.buf)
+	}
+	out := make([]byte, n)
+	copy(out, r.buf[:n])
+	r.buf = append(r.buf[:0], r.buf[n:]...)
+	return out
+}
+
+// renderStream continuously renders PCM pulled from src to a device until stop
+// closes — the streaming counterpart to playPCM's fixed buffer. On underrun it
+// writes silence rather than glitching, keeping the WASAPI clock steady so live
+// monitor audio flows smoothly even when the source stalls briefly. Runs on a
+// COM-initialised, OS-locked thread.
+func renderStream(deviceID string, rate, ch, bits int, stop <-chan struct{}, src *pcmRing) error {
+	runtime.LockOSThread()
+	defer runtime.UnlockOSThread()
+	if err := coInit(); err != nil {
+		return fmt.Errorf("CoInitialize: %w", err)
+	}
+	defer ole.CoUninitialize()
+
+	dev, err := openDevice(wca.ERender, deviceID)
+	if err != nil {
+		return err
+	}
+	defer dev.Release()
+
+	var ac *wca.IAudioClient
+	if err := dev.Activate(wca.IID_IAudioClient, wca.CLSCTX_ALL, nil, &ac); err != nil {
+		return fmt.Errorf("activate render: %w", err)
+	}
+	defer ac.Release()
+
+	frameBytes := ch * bits / 8
+	if frameBytes <= 0 {
+		return fmt.Errorf("bad audio format")
+	}
+	wfx := &wca.WAVEFORMATEX{
+		WFormatTag: 1, NChannels: uint16(ch), NSamplesPerSec: uint32(rate),
+		NAvgBytesPerSec: uint32(rate * frameBytes), NBlockAlign: uint16(frameBytes),
+		WBitsPerSample: uint16(bits), CbSize: 0,
+	}
+	if err := ac.Initialize(wca.AUDCLNT_SHAREMODE_SHARED, autoConvert,
+		wca.REFERENCE_TIME(bufferDuration100ns), 0, wfx, nil); err != nil {
+		return fmt.Errorf("initialize render: %w", err)
+	}
+	var bufFrames uint32
+	if err := ac.GetBufferSize(&bufFrames); err != nil {
+		return err
+	}
+	var arc *wca.IAudioRenderClient
+	if err := ac.GetService(wca.IID_IAudioRenderClient, &arc); err != nil {
+		return fmt.Errorf("get render service: %w", err)
+	}
+	defer arc.Release()
+
+	// feed fills up to `frames` render frames: as much real audio as the ring
+	// has, the remainder silence (so the buffer stays full and the clock steady).
+	feed := func(frames int) error {
+		if frames <= 0 {
+			return nil
+		}
+		var data *byte
+		if err := arc.GetBuffer(uint32(frames), &data); err != nil {
+			return err
+		}
+		dst := unsafe.Slice(data, frames*frameBytes)
+		got := src.pull(frames * frameBytes)
+		n := copy(dst, got)
+		for i := n; i < len(dst); i++ {
+			dst[i] = 0 // silence-fill the shortfall
+		}
+		arc.ReleaseBuffer(uint32(frames), 0)
+		return nil
+	}
+
+	if err := feed(int(bufFrames)); err != nil { // pre-fill to avoid a start glitch
+		return err
+	}
+	if err := ac.Start(); err != nil {
+		return fmt.Errorf("start render: %w", err)
+	}
+	defer ac.Stop()
+
+	for {
+		select {
+		case <-stop:
+			return nil
+		default:
+		}
+		var padding uint32
+		ac.GetCurrentPadding(&padding)
+		if err := feed(int(bufFrames - padding)); err != nil {
+			return err
+		}
+		time.Sleep(8 * time.Millisecond)
+	}
+}

internal/audio/manager.go

@@ -15,6 +15,9 @@ type Manager struct {
 	recStop  chan struct{}
 	recDone  chan recResult
 	playStop chan struct{}
+	monStop  chan struct{} // RX monitor passthrough (capture → render)
+	monRing  *pcmRing      // live audio hand-off, also fed by the network stream
+	txStop   chan struct{} // TX audio passthrough (mic → rig)
 	onChange func()        // fired on any record/playback state transition
 }
 
@@ -135,3 +138,130 @@ func (m *Manager) StopPlayback() {
 		m.notify()
 	}
 }
+
+// ---- RX audio monitor (Phase 2: USB codec passthrough) --------------------
+//
+// StartMonitor pipes live RX audio from inputDev (e.g. the rig's "USB Audio
+// CODEC" capture endpoint) to outputDev (your speakers/headset) through a
+// latency-bounded ring, so you HEAR the radio inside OpsLog. The very same ring
+// is later fed by the network 50003 stream instead of a USB capture — the render
+// half is transport-agnostic. inputDev "" = system default capture.
+func (m *Manager) StartMonitor(inputDev, outputDev string) error {
+	return m.startMonitor(inputDev, outputDev, true)
+}
+
+// StartMonitorSink starts ONLY the render side (no USB capture) so an external
+// producer — the network 50003 stream — can feed decoded RX PCM via
+// PushMonitorAudio. Same output path as StartMonitor, minus the capture goroutine.
+func (m *Manager) StartMonitorSink(outputDev string) error {
+	return m.startMonitor("", outputDev, false)
+}
+
+// startMonitor wires the RX monitor: always a render loop pulling from monRing;
+// when capture is true it also captures inputDev into that ring (USB monitor).
+// When false the ring is fed only by PushMonitorAudio (network audio).
+func (m *Manager) startMonitor(inputDev, outputDev string, capture bool) error {
+	m.mu.Lock()
+	if m.monStop != nil {
+		m.mu.Unlock()
+		return fmt.Errorf("monitor already running")
+	}
+	stop := make(chan struct{})
+	ring := newPCMRing(bytesPerSec / 2) // ~500 ms cap — low latency for live monitor
+	m.monStop, m.monRing = stop, ring
+	m.mu.Unlock()
+
+	if capture {
+		// Producer: capture the rig's USB audio into the ring.
+		go func() {
+			_ = captureStream(inputDev, stop, func(chunk []byte) { ring.Push(chunk) })
+		}()
+	}
+	// Consumer: render the ring to the output device at the internal 16 kHz mono.
+	go func() {
+		_ = renderStream(outputDev, sampleRate, channels, bitsPerSample, stop, ring)
+	}()
+	m.notify()
+	return nil
+}
+
+// StopMonitor stops the RX monitor passthrough.
+func (m *Manager) StopMonitor() {
+	m.mu.Lock()
+	stop := m.monStop
+	m.monStop, m.monRing = nil, nil
+	m.mu.Unlock()
+	if stop != nil {
+		close(stop)
+		m.notify()
+	}
+}
+
+// MonitorActive reports whether the RX monitor passthrough is running.
+func (m *Manager) MonitorActive() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.monStop != nil
+}
+
+// PushMonitorAudio feeds externally-sourced PCM (16 kHz mono 16-bit) into the
+// active monitor's output — the hook the network 50003 audio stream uses to play
+// decoded RX through the very same output path a USB capture feeds. No-op when no
+// monitor is running. Keeps the unexported ring inside the package.
+func (m *Manager) PushMonitorAudio(pcm []byte) {
+	m.mu.Lock()
+	ring := m.monRing
+	m.mu.Unlock()
+	if ring != nil {
+		ring.Push(pcm)
+	}
+}
+
+// ---- TX audio passthrough (Phase 3: live mic → rig over USB) --------------
+//
+// StartTXAudio pipes your live microphone (micDev) into the rig's audio input
+// (toRadioDev — for a USB-connected rig, its "USB Audio CODEC" render endpoint),
+// so you talk through the PC. It is the mirror of StartMonitor (same ring +
+// capture + render primitives, source/sink swapped). PTT keying is the caller's
+// job (the app layer keys PTT before this and unkeys after) so this stays a pure
+// audio route. The captured 16 kHz mono stream is also the exact shape the future
+// network 50003 TX will encode and send — so Phase 5 reuses this capture side.
+func (m *Manager) StartTXAudio(micDev, toRadioDev string) error {
+	m.mu.Lock()
+	if m.txStop != nil {
+		m.mu.Unlock()
+		return fmt.Errorf("TX audio already running")
+	}
+	stop := make(chan struct{})
+	ring := newPCMRing(bytesPerSec / 4) // ~250 ms — tighter for live TX latency
+	m.txStop = stop
+	m.mu.Unlock()
+
+	go func() {
+		_ = captureStream(micDev, stop, func(chunk []byte) { ring.Push(chunk) })
+	}()
+	go func() {
+		_ = renderStream(toRadioDev, sampleRate, channels, bitsPerSample, stop, ring)
+	}()
+	m.notify()
+	return nil
+}
+
+// StopTXAudio stops the TX mic→rig passthrough.
+func (m *Manager) StopTXAudio() {
+	m.mu.Lock()
+	stop := m.txStop
+	m.txStop = nil
+	m.mu.Unlock()
+	if stop != nil {
+		close(stop)
+		m.notify()
+	}
+}
+
+// TXAudioActive reports whether the TX mic→rig passthrough is running.
+func (m *Manager) TXAudioActive() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.txStop != nil
+}

internal/cat/cat.go

@@ -275,6 +275,11 @@ type FlexTXState struct {
 	Mon          bool   `json:"mon"`
 	MonLevel     int    `json:"mon_level"`
 	MicLevel     int    `json:"mic_level"`
+	TXFilterLow  int    `json:"tx_filter_low"`  // TX filter low cut (Hz)
+	TXFilterHigh int    `json:"tx_filter_high"` // TX filter high cut (Hz)
+	// Mic profiles (SmartSDR): the list of available profiles + the loaded one.
+	MicProfile   string   `json:"mic_profile,omitempty"`
+	MicProfiles  []string `json:"mic_profiles,omitempty"`
 	ATUStatus    string `json:"atu_status,omitempty"`
 	ATUMemories  bool   `json:"atu_memories"`
 	// Active RX slice DSP controls.
@@ -296,6 +301,8 @@ type FlexTXState struct {
 	NRLevel      int      `json:"nr_level"`
 	ANF          bool     `json:"anf"`
 	ANFLevel     int      `json:"anf_level"`
+	WNB          bool     `json:"wnb"`
+	WNBLevel     int      `json:"wnb_level"`
 	// CW / mode-specific controls.
 	Mode           string `json:"mode,omitempty"` // active slice mode (CW/USB/LSB/DIGU…)
 	CWSpeed        int    `json:"cw_speed"`
@@ -344,6 +351,8 @@ type FlexController interface {
 	SetMon(bool) error
 	SetMonLevel(int) error
 	SetMic(int) error
+	SetTXFilter(low, high int) error // transmit-audio bandwidth (Hz)
+	SetMicProfile(string) error      // load a SmartSDR mic profile by name
 	ATUStart() error
 	ATUBypass() error
 	SetATUMemories(bool) error
@@ -365,6 +374,8 @@ type FlexController interface {
 	SetANFLevel(int) error
 	SetAPF(bool) error
 	SetAPFLevel(int) error
+	SetWNB(bool) error
+	SetWNBLevel(int) error
 	// CW keyer + mode-specific controls.
 	SetCWSpeed(int) error
 	SetCWPitch(int) error

internal/cat/civ/civ.go

@@ -313,6 +313,8 @@ func ModelName(addr byte) string {
 		return "IC-7300"
 	case 0x98:
 		return "IC-7610"
+	case 0x7C:
+		return "IC-9100"
 	case 0xA2:
 		return "IC-9700"
 	case 0xA4:

internal/cat/flex.go

@@ -38,6 +38,8 @@ type Flex struct {
 	slices        map[int]*flexSlice
 	tx            flexTX               // transmit/ATU state pushed by the radio (FlexRadio tab)
 	amp           flexAmp              // external amplifier (PowerGenius XL) state
+	micProfiles   []string             // available mic profiles (SmartSDR "profile mic list")
+	micProfile    string               // currently loaded mic profile
 	txSetAt       map[string]time.Time // status field → when WE last set it (ignore the radio's lagging echo briefly)
 	lastStateSig  string               // last logged derived-state signature (log only on change)
 	boundClientID string               // GUI client (SmartSDR) we bound to; "" until bound. Binding lets this non-GUI client receive GUI-tied data (CW pitch/speed, break-in delay, RF power).
@@ -85,6 +87,8 @@ type flexSlice struct {
 	anfLevel     int
 	apf          bool // CW audio peaking filter
 	apfLevel     int
+	wnb          bool // wideband noise blanker
+	wnbLevel     int
 	filterLo     int      // slice filter low cut (Hz)
 	filterHi     int      // slice filter high cut (Hz)
 	rxAnt        string   // selected RX antenna (e.g. ANT1, ANT2, RX_A)
@@ -108,6 +112,8 @@ type flexTX struct {
 	mon          bool
 	monLevel     int
 	micLevel     int
+	filterLow    int // TX filter low cut (Hz)
+	filterHigh   int // TX filter high cut (Hz)
 	atuStatus    string
 	atuMemories  bool
 	// CW keyer params (set via the top-level "cw" commands).
@@ -209,6 +215,8 @@ func (f *Flex) Connect() error {
 	f.send("sub amplifier all") // external amplifier (PowerGenius XL) operate/standby
 	f.send("sub radio all")     // radio-wide incl. interlock (TX/RX state)
 	f.send("sub cwx all")       // CWX: the LIVE CW speed/pitch/break-in (transmit holds only a static default)
+	f.send("sub profile all")   // mic/global/tx profiles (for the mic-profile dropdown)
+	f.send("profile mic info")  // request the current mic profile list + selection
 	f.send("sub client all")    // learn the GUI client (SmartSDR) so we can bind to it (below)
 	f.startMeters(conn)         // open the UDP VITA-49 stream for live meters
 	if f.spotsEnabled {
@@ -445,6 +453,12 @@ func (f *Flex) handleStatus(payload string) {
 					f.tx.cwBreakInDelay = atoiDefault(val, f.tx.cwBreakInDelay)
 				case "mic_level", "miclevel":
 					f.tx.micLevel = atoiDefault(val, f.tx.micLevel)
+				// TX filter: the transmit STATUS reports the passband as lo/hi (the
+				// SET command is filter_low/filter_high — a SmartSDR quirk).
+				case "lo", "filter_low":
+					f.tx.filterLow = atoiDefault(val, f.tx.filterLow)
+				case "hi", "filter_high":
+					f.tx.filterHigh = atoiDefault(val, f.tx.filterHigh)
 				}
 			}
 			f.mu.Unlock()
@@ -526,6 +540,35 @@ func (f *Flex) handleStatus(payload string) {
 			}
 			f.mu.Unlock()
 		}
+		// Mic-profile object — "profile mic list=A^B^C" (available profiles) and
+		// "profile mic current=<name>" (loaded one). Names can contain spaces, so
+		// values are taken from the raw payload after the key. Logged once so the
+		// exact field names are confirmable on real hardware.
+		if len(fields) >= 2 && fields[0] == "profile" && fields[1] == "mic" {
+			debugLog.Printf("Flex: profile status: %s", payload)
+			if i := strings.Index(payload, "list="); i >= 0 {
+				var profs []string
+				for _, p := range strings.Split(payload[i+len("list="):], "^") {
+					if p = strings.TrimSpace(p); p != "" {
+						profs = append(profs, p)
+					}
+				}
+				f.mu.Lock()
+				f.micProfiles = profs
+				f.mu.Unlock()
+			}
+			// The loaded profile arrives as current=<name> (some firmwares:
+			// selection=<name>); accept either.
+			for _, key := range []string{"current=", "selection="} {
+				if i := strings.Index(payload, key); i >= 0 {
+					cur := strings.TrimSpace(payload[i+len(key):])
+					f.mu.Lock()
+					f.micProfile = cur
+					f.mu.Unlock()
+					break
+				}
+			}
+		}
 		// Interlock object — transmit state (RECEIVE / TRANSMITTING / …).
 		if len(fields) >= 1 && fields[0] == "interlock" {
 			f.mu.Lock()
@@ -744,6 +787,10 @@ func (f *Flex) handleStatus(payload string) {
 			s.apf = val == "1"
 		case "apf_level":
 			s.apfLevel = atoiDefault(val, s.apfLevel)
+		case "wnb":
+			s.wnb = val == "1"
+		case "wnb_level":
+			s.wnbLevel = atoiDefault(val, s.wnbLevel)
 		case "filter_lo":
 			s.filterLo = atoiDefault(val, s.filterLo)
 		case "filter_hi":
@@ -803,24 +850,44 @@ func (f *Flex) ReadState() (RigState, error) {
 // band) never hijacks the main frequency. Returns (-1, nil) when no slice is in
 // use. Caller holds f.mu.
 func (f *Flex) mainSliceLocked() (int, *flexSlice) {
-	best, bestS := 1<<30, (*flexSlice)(nil)
+	// Iterate in ASCENDING index order — NEVER map-iteration order, which Go
-	for idx, s := range f.slices {
+	// randomises. When two slices transiently BOTH report active=1 (e.g. an
+	// external controller like DXHunter activates a slice on another band while
+	// ours still holds active, before SmartSDR sends active=0 to the old one),
+	// map order returned a RANDOM active slice each call → the operating frequency
+	// flip-flopped 40m/20m every poll and the Ultrabeam motors chased it forever.
+	// Deterministic order = the lowest-indexed active slice wins, stably.
+	firstInUse := -1
+	for _, idx := range f.sortedSliceIdxLocked() {
+		s := f.slices[idx]
 		if !s.inUse {
 			continue
 		}
+		if firstInUse < 0 {
+			firstInUse = idx
+		}
 		if s.active {
 			return idx, s
 		}
-		if idx < best {
-			best, bestS = idx, s
 	}
-	}
+	if firstInUse >= 0 {
-	if bestS != nil {
+		return firstInUse, f.slices[firstInUse]
-		return best, bestS
 	}
 	return -1, nil
 }
 
+// sortedSliceIdxLocked returns the slice indices in ascending order so every
+// slice-selection helper is deterministic (map iteration is randomised). Caller
+// holds f.mu.
+func (f *Flex) sortedSliceIdxLocked() []int {
+	idxs := make([]int, 0, len(f.slices))
+	for idx := range f.slices {
+		idxs = append(idxs, idx)
+	}
+	sort.Ints(idxs)
+	return idxs
+}
+
 // activeSliceIndexLocked returns the slice index to send commands to (the main
 // slice, else 0). Caller holds f.mu.
 func (f *Flex) activeSliceIndexLocked() int {
@@ -841,8 +908,8 @@ func sliceLetter(idx int) string {
 // txSliceLocked returns the slice flagged as the transmitter (tx=1), or nil.
 // Caller holds f.mu.
 func (f *Flex) txSliceLocked() *flexSlice {
-	for _, s := range f.slices {
+	for _, idx := range f.sortedSliceIdxLocked() {
-		if s.inUse && s.tx {
+		if s := f.slices[idx]; s.inUse && s.tx {
 			return s
 		}
 	}
@@ -871,7 +938,8 @@ func (f *Flex) operatingLocked() (main, rx, tx *flexSlice) {
 	if main != nil && main != txS && main.freqHz != txS.freqHz && BandFromHz(main.freqHz) == bt {
 		rx = main
 	} else {
-		for _, s := range f.slices {
+		for _, idx := range f.sortedSliceIdxLocked() {
+			s := f.slices[idx]
 			if s.inUse && s != txS && s.freqHz != txS.freqHz && BandFromHz(s.freqHz) == bt {
 				rx = s
 				break
@@ -927,6 +995,15 @@ func (f *Flex) SetFrequency(hz int64) error {
 	f.mu.Lock()
 	idx := f.activeSliceIndexLocked()
 	connected := f.conn != nil
+	// Optimistically update the active slice's cached freq NOW, before the radio
+	// echoes the slice status back. Otherwise ReadState/FlexState keep reporting
+	// the OLD freq for the round-trip: the top display (optimistic liveFreqHz)
+	// jumped to the new band while the slice cache — which the FlexPanel and the
+	// Ultrabeam follow loop read — still showed the old one, so the antenna chased
+	// the stale value. The real echo confirms/corrects this a moment later.
+	if s := f.slices[idx]; s != nil {
+		s.freqHz = hz
+	}
 	f.mu.Unlock()
 	if !connected {
 		return fmt.Errorf("flex: not connected")
@@ -952,6 +1029,13 @@ func (f *Flex) SetMode(mode string) error {
 	if fm == "" {
 		return fmt.Errorf("flex: unsupported mode %q", mode)
 	}
+	// Optimistically cache the new mode too (same reasoning as SetFrequency) so the
+	// panel reflects it immediately instead of lagging the radio's echo.
+	f.mu.Lock()
+	if s := f.slices[idx]; s != nil {
+		s.mode = fm
+	}
+	f.mu.Unlock()
 	// "slice s <rx> mode=<m>" — set command per the SmartSDR API.
 	f.send(fmt.Sprintf("slice s %d mode=%s", idx, fm))
 	return nil
@@ -1127,6 +1211,10 @@ func (f *Flex) FlexState() FlexTXState {
 		Mon:          f.tx.mon,
 		MonLevel:     f.tx.monLevel,
 		MicLevel:     f.tx.micLevel,
+		TXFilterLow:  f.tx.filterLow,
+		TXFilterHigh: f.tx.filterHigh,
+		MicProfile:   f.micProfile,
+		MicProfiles:  f.micProfiles,
 		ATUStatus:    f.tx.atuStatus,
 		ATUMemories:  f.tx.atuMemories,
 		// CW keyer (defaults applied so the sliders show sane values pre-read).
@@ -1177,6 +1265,8 @@ func (f *Flex) FlexState() FlexTXState {
 		st.ANFLevel = rx.anfLevel
 		st.APF = rx.apf
 		st.APFLevel = rx.apfLevel
+		st.WNB = rx.wnb
+		st.WNBLevel = rx.wnbLevel
 		st.FilterLo = rx.filterLo
 		st.FilterHi = rx.filterHi
 		st.RXAnt = rx.rxAnt
@@ -1354,6 +1444,8 @@ func (f *Flex) SetANF(on bool) error    { return f.sendSlice("anf", boolFlex(on)
 func (f *Flex) SetANFLevel(l int) error { return f.sendSlice("anf_level", clampLevel(l)) }
 func (f *Flex) SetAPF(on bool) error    { return f.sendSlice("apf", boolFlex(on)) }
 func (f *Flex) SetAPFLevel(l int) error { return f.sendSlice("apf_level", clampLevel(l)) }
+func (f *Flex) SetWNB(on bool) error    { return f.sendSlice("wnb", boolFlex(on)) }
+func (f *Flex) SetWNBLevel(l int) error { return f.sendSlice("wnb_level", clampLevel(l)) }
 
 // ── CW keyer controls (top-level "cw" commands) ──
 
@@ -1571,6 +1663,45 @@ func (f *Flex) SetMic(l int) error {
 	return f.txSet(fmt.Sprintf("transmit set miclevel=%d", l), "mic_level", func(t *flexTX) { t.micLevel = l })
 }
 
+// SetTXFilter sets the transmit-audio bandwidth (low + high cut, in Hz). SmartSDR
+// clamps to legal values per mode; we just pass them through in one command so
+// both edges move together.
+func (f *Flex) SetTXFilter(low, high int) error {
+	if low < 0 {
+		low = 0
+	}
+	if high < low {
+		high = low
+	}
+	// Guard both status field names (the echo comes back as lo/hi, not
+	// filter_low/high) so the radio's lagging echo doesn't snap the inputs back.
+	f.mu.Lock()
+	f.txSetAt["hi"] = time.Now()
+	f.mu.Unlock()
+	return f.txSet(fmt.Sprintf("transmit set filter_low=%d filter_high=%d", low, high), "lo",
+		func(t *flexTX) { t.filterLow, t.filterHigh = low, high })
+}
+
+// SetMicProfile loads a SmartSDR mic profile by name (quoted, as names may hold
+// spaces). Optimistically caches the selection.
+func (f *Flex) SetMicProfile(name string) error {
+	name = strings.TrimSpace(name)
+	if name == "" {
+		return fmt.Errorf("flex: empty mic profile")
+	}
+	f.mu.Lock()
+	connected := f.conn != nil
+	if connected {
+		f.micProfile = name
+	}
+	f.mu.Unlock()
+	if !connected {
+		return fmt.Errorf("flex: not connected")
+	}
+	f.send(fmt.Sprintf("profile mic load \"%s\"", name))
+	return nil
+}
+
 func (f *Flex) ATUStart() error {
 	if !f.connected() {
 		return fmt.Errorf("flex: not connected")

internal/cat/icomaudio.go

@@ -0,0 +1,219 @@
+package cat
+
+// icomaudio.go — the NETWORK AUDIO stream (UDP 50003) for the Icom LAN protocol.
+// It is the third stream alongside control (50001) and CI-V (50002): once the
+// control login + conninfo (with rxenable=1) authorize audio, the rig streams RX
+// audio here as data packets. This file dials/handshakes/keeps-alive that socket
+// exactly like the CI-V stream (icomnet.go) — those parts are byte-for-byte the
+// PROVEN transport — and hands each received audio payload to a sink callback
+// (the app decodes it via an audio.Codec and plays it through the RX monitor).
+//
+// Reuses icomnet.go's helpers (icnCtrl, icnHandshake, icnPingReply, icnRecv,
+// icnLocalID, icnLE) and the same seq/retransmit discipline.
+//
+// ⚠️ PAYLOAD OFFSET PENDING ON-RIG VERIFICATION. The stream framing (handshake,
+// ping, idle, retransmit, common 16-byte header) is identical to CI-V and proven.
+// The AUDIO data packet's inner layout — where the PCM starts and the datalen
+// field — is reconstructed from wfview's audio_packet (ident@0x10, datalen@0x12,
+// sendseq@0x14, audio@0x16) but NOT yet confirmed against a real 50003 capture.
+// audioPump logs the first few raw packets (icaDumpFirst) so the offset can be
+// confirmed/corrected on the first on-rig test without a packet capture, the same
+// way the CI-V/scope framing was iterated. Nothing here can destabilize CAT: the
+// audio stream is opt-in and entirely separate from control/CI-V.
+
+import (
+	"net"
+	"sync"
+	"sync/atomic"
+	"time"
+)
+
+// icaAudioOffset is where the PCM payload begins inside an audio data packet
+// (wfview audio_packet: 16-byte common header + ident@0x10 + datalen@0x12 +
+// sendseq@0x14 → audio@0x16). Isolated as a const so a capture-confirmed change
+// is a one-line edit.
+const icaAudioOffset = 0x16
+
+// icaDumpFirst is how many initial audio packets to hex-dump to the debug log for
+// offset verification. After the layout is confirmed on a real rig this can go to
+// 0 (or the const above corrected).
+const icaDumpFirst = 6
+
+// icomAudio is the connected audio stream. RX only for now (Phase 4); TX (Phase
+// 5) will add an encode+send path mirroring icomNet.Write.
+type icomAudio struct {
+	conn         *net.UDPConn
+	aID, aRemote uint32
+
+	sink func([]byte) // receives each raw audio payload (app decodes + plays)
+
+	// Receive-side retransmit (audio is a heavy stream, like the scope): track the
+	// rig's data-packet send seq and ask it to resend gaps, or the rig drops the
+	// session. Same mechanism as icomNet. Owned solely by audioPump → no lock.
+	rxHaveSeq bool
+	rxLastSeq uint16
+	rxMissing map[uint16]int
+
+	dumped int          // packets hex-dumped so far (≤ icaDumpFirst)
+	lastRx atomic.Int64 // UnixNano of last packet (liveness)
+
+	done      chan struct{}
+	closeOnce sync.Once
+}
+
+func (a *icomAudio) markRx() { a.lastRx.Store(time.Now().UnixNano()) }
+
+// Close tears the audio stream down (disconnect a few times; UDP is lossy).
+func (a *icomAudio) Close() {
+	a.closeOnce.Do(func() {
+		close(a.done)
+		for i := 0; i < 3; i++ {
+			_, _ = a.conn.Write(icnCtrl(0x05, 0, a.aID, a.aRemote)) // disconnect
+			time.Sleep(15 * time.Millisecond)
+		}
+		_ = a.conn.Close()
+		debugLog.Printf("icom audio: stream closed")
+	})
+}
+
+// dialIcomAudio opens the audio UDP stream to rig:50003, binding LOCAL :50003
+// (mirroring the civ stream's local :50002). The control conninfo (rxenable=1,
+// audioport=50003) must already have authorized it. sink receives each raw audio
+// payload. cancel aborts a slow dial (Stop/Start).
+func dialIcomAudio(host string, sink func([]byte), cancel <-chan struct{}) (*icomAudio, error) {
+	araddr, err := net.ResolveUDPAddr("udp4", net.JoinHostPort(host, "50003"))
+	if err != nil {
+		return nil, err
+	}
+	conn, err := net.DialUDP("udp4", &net.UDPAddr{Port: 50003}, araddr)
+	if err != nil {
+		debugLog.Printf("icom audio: cannot bind local :50003 (Remote Utility running?): %v", err)
+		return nil, err
+	}
+	aID := icnLocalID(conn)
+	aRemote, err := icnHandshake(conn, aID, cancel)
+	if err != nil {
+		_ = conn.Close()
+		debugLog.Printf("icom audio: handshake FAILED: %v", err)
+		return nil, err
+	}
+	_ = conn.SetReadBuffer(1 << 20)
+	a := &icomAudio{
+		conn: conn, aID: aID, aRemote: aRemote,
+		sink:      sink,
+		rxMissing: make(map[uint16]int),
+		done:      make(chan struct{}),
+	}
+	a.markRx()
+	debugLog.Printf("icom audio: stream up (rig id 0x%08X) — awaiting RX audio", aRemote)
+	go a.audioPump()
+	return a, nil
+}
+
+// audioPump drains the audio socket: replies to pings, sends idle keepalives,
+// requests retransmits for lost packets, and hands each audio payload to sink.
+func (a *icomAudio) audioPump() {
+	buf := make([]byte, 8192)
+	lastIdle := time.Now()
+	lastReq := time.Now()
+	for {
+		select {
+		case <-a.done:
+			return
+		default:
+		}
+		_ = a.conn.SetReadDeadline(time.Now().Add(100 * time.Millisecond))
+		if k, err := a.conn.Read(buf); err == nil && k >= 16 {
+			a.markRx()
+			switch typ := icnLE.Uint16(buf[4:]); {
+			case typ == 0x07: // ping
+				_, _ = a.conn.Write(icnPingReply(buf[:k], a.aID, a.aRemote))
+			case typ == 0x01: // retransmit request from the rig (we send no tracked audio yet)
+			case typ == 0x05: // rig-initiated disconnect
+				debugLog.Printf("icom audio: rig sent DISCONNECT — audio stream dropped by the rig")
+			case typ == 0x00 && k > icaAudioOffset: // audio data packet
+				a.trackRxSeq(icnLE.Uint16(buf[6:]))
+				if a.dumped < icaDumpFirst {
+					a.dumped++
+					debugLog.Printf("icom audio raw #%d: len=%d head=% X", a.dumped, k, buf[:min(icaAudioOffset+8, k)])
+				}
+				if a.sink != nil {
+					payload := append([]byte(nil), buf[icaAudioOffset:k]...)
+					a.sink(payload)
+				}
+			}
+		}
+		if time.Since(lastIdle) > 100*time.Millisecond {
+			_, _ = a.conn.Write(icnCtrl(0x00, 0, a.aID, a.aRemote))
+			lastIdle = time.Now()
+		}
+		if time.Since(lastReq) > 100*time.Millisecond {
+			a.sendRetransmitReq()
+			lastReq = time.Now()
+		}
+	}
+}
+
+// trackRxSeq / sendRetransmitReq mirror icomNet's receive-side retransmit exactly
+// (audio is as loss-sensitive as the scope stream). Duplicated deliberately so
+// the audio stream owns its own seq state with no shared locking.
+func (a *icomAudio) trackRxSeq(seq uint16) {
+	if !a.rxHaveSeq {
+		a.rxHaveSeq = true
+		a.rxLastSeq = seq
+		return
+	}
+	switch d := int16(seq - a.rxLastSeq); {
+	case d == 0:
+	case d < 0:
+		delete(a.rxMissing, seq)
+	case d == 1:
+		a.rxLastSeq = seq
+	case int(d) <= icnMaxMissing:
+		for f := a.rxLastSeq + 1; f != seq; f++ {
+			a.rxMissing[f] = 0
+		}
+		a.rxLastSeq = seq
+	default:
+		a.rxMissing = make(map[uint16]int)
+		a.rxLastSeq = seq
+	}
+}
+
+func (a *icomAudio) sendRetransmitReq() {
+	if len(a.rxMissing) == 0 {
+		return
+	}
+	if len(a.rxMissing) > icnMaxMissing {
+		a.rxMissing = make(map[uint16]int)
+		return
+	}
+	var seqs []uint16
+	for s, cnt := range a.rxMissing {
+		if cnt >= 4 {
+			delete(a.rxMissing, s)
+			continue
+		}
+		a.rxMissing[s] = cnt + 1
+		seqs = append(seqs, s)
+	}
+	switch {
+	case len(seqs) == 0:
+		return
+	case len(seqs) == 1:
+		_, _ = a.conn.Write(icnCtrl(0x01, seqs[0], a.aID, a.aRemote))
+	default:
+		b := make([]byte, 16+4*len(seqs))
+		icnLE.PutUint32(b[0:], uint32(len(b)))
+		icnLE.PutUint16(b[4:], 0x01)
+		icnLE.PutUint32(b[8:], a.aID)
+		icnLE.PutUint32(b[12:], a.aRemote)
+		off := 16
+		for _, s := range seqs {
+			icnLE.PutUint16(b[off:], s)
+			icnLE.PutUint16(b[off+2:], s)
+			off += 4
+		}
+		_, _ = a.conn.Write(b)
+	}
+}

internal/cat/icomnet.go

@@ -36,7 +36,13 @@ var icnBE = binary.BigEndian
 // NewIcomNet builds an (unconnected) Icom backend whose transport is the network
 // stream. host is the rig's IP/hostname; user/pass are the rig's Network User1
 // credentials. Reuses the whole IcomSerial controller — only `open` differs.
-func NewIcomNet(host, user, pass string, civAddr int, digitalDefault string) *IcomSerial {
+//
+// audioSink (optional) enables the network RX audio stream (UDP 50003): when
+// non-nil the conninfo asks the rig to stream audio and each received payload is
+// passed to audioSink (the app decodes it via an audio.Codec and plays it). nil
+// = CI-V only (the proven default). The audio stream is fully separate from CAT,
+// so enabling it can't affect freq/mode/DSP control.
+func NewIcomNet(host, user, pass string, civAddr int, digitalDefault string, audioSink func([]byte)) *IcomSerial {
 	if civAddr <= 0 || civAddr > 0xFF {
 		civAddr = 0x98 // IC-7610
 	}
@@ -57,7 +63,7 @@ func NewIcomNet(host, user, pass string, civAddr int, digitalDefault string) *Ic
 		b.dialMu.Lock()
 		cancel := b.dialCancel
 		b.dialMu.Unlock()
-		return dialIcomNet(host, user, pass, "OpsLog", b.rigAddr, cancel)
+		return dialIcomNet(host, user, pass, "OpsLog", b.rigAddr, cancel, audioSink)
 	}
 	return b
 }
@@ -130,6 +136,10 @@ type icomNet struct {
 	// but link fine" (stay connected) from "link dead" (reconnect). See Alive().
 	lastRx atomic.Int64
 
+	// audio is the optional RX audio stream (UDP 50003). nil when audio is off.
+	// Torn down alongside the CI-V/control streams in Close.
+	audio *icomAudio
+
 	done      chan struct{}
 	closeOnce sync.Once
 }
@@ -232,6 +242,9 @@ var icnTrace = false
 func (n *icomNet) Close() error {
 	n.closeOnce.Do(func() {
 		close(n.done)
+		if n.audio != nil {
+			n.audio.Close()
+		}
 		// Tell the rig we're leaving so it frees its SINGLE control session at
 		// once. If it never gets a disconnect it holds the session for minutes and
 		// refuses every new login — which is why a lost link (or a hard app exit)
@@ -475,8 +488,9 @@ func (n *icomNet) resend(seq uint16) {
 
 // ------------------------- connect -------------------------
 
-func dialIcomNet(host, user, pass, compName string, rigAddr byte, cancel <-chan struct{}) (*icomNet, error) {
+func dialIcomNet(host, user, pass, compName string, rigAddr byte, cancel <-chan struct{}, audioSink func([]byte)) (*icomNet, error) {
-	debugLog.Printf("icom net: connecting to %s (user %q, comp %q, rig addr 0x%02X)", host, user, compName, rigAddr)
+	wantAudio := audioSink != nil
+	debugLog.Printf("icom net: connecting to %s (user %q, comp %q, rig addr 0x%02X, audio=%v)", host, user, compName, rigAddr, wantAudio)
 	// ---- control stream (50001): handshake → login → token → conninfo ----
 	craddr, err := net.ResolveUDPAddr("udp4", net.JoinHostPort(host, "50001"))
 	if err != nil {
@@ -562,7 +576,11 @@ func dialIcomNet(host, user, pass, compName string, rigAddr byte, cancel <-chan
 		rigMAC = make([]byte, 6)
 	}
 
-	_, _ = ctrl.Write(icnConnInfo(cTracked, cInner, tokReq, cID, cRemote, token, user, rigMAC, 50002, 50003))
+	var rxEnable byte
+	if wantAudio {
+		rxEnable = 0x01 // ask the rig to stream RX audio on 50003
+	}
+	_, _ = ctrl.Write(icnConnInfo(cTracked, cInner, tokReq, cID, cRemote, token, user, rigMAC, 50002, 50003, rxEnable))
 	cTracked++
 	cInner++
 	drainEnd := time.Now().Add(500 * time.Millisecond)
@@ -634,6 +652,18 @@ func dialIcomNet(host, user, pass, compName string, rigAddr byte, cancel <-chan
 
 	go n.ctrlPump()
 	go n.civPump()
+
+	// Optional RX audio stream (50003). The rig was told (conninfo rxEnable=1) to
+	// stream audio; open the socket + handshake now. A failure here is NON-fatal:
+	// CAT works without audio, so we log and continue rather than tear down a
+	// perfectly good control/CI-V session.
+	if wantAudio {
+		if a, err := dialIcomAudio(host, audioSink, cancel); err != nil {
+			debugLog.Printf("icom net: audio stream FAILED (CAT unaffected): %v", err)
+		} else {
+			n.audio = a
+		}
+	}
 	return n, nil
 }
 
@@ -772,7 +802,7 @@ func icnTokenRenew(seq, innerSeq, tokReq uint16, sentid, rcvdid, token uint32) [
 	return b
 }
 
-func icnConnInfo(seq, innerSeq, tokReq uint16, sentid, rcvdid, token uint32, user string, rigMAC []byte, civPort, audioPort uint16) []byte {
+func icnConnInfo(seq, innerSeq, tokReq uint16, sentid, rcvdid, token uint32, user string, rigMAC []byte, civPort, audioPort uint16, rxEnable byte) []byte {
 	b := make([]byte, 0x90)
 	icnLE.PutUint32(b[0:], 0x90)
 	icnLE.PutUint16(b[6:], seq)
@@ -788,8 +818,8 @@ func icnConnInfo(seq, innerSeq, tokReq uint16, sentid, rcvdid, token uint32, use
 	copy(b[0x2a:0x30], rigMAC)
 	copy(b[0x40:0x60], []byte("IC-7610"))
 	copy(b[0x60:0x70], icnPasscode(user))
-	b[0x70] = 0x00 // rxenable (audio off — CI-V only)
+	b[0x70] = rxEnable // rxenable: 1 opens the 50003 RX audio stream, 0 = CI-V only
-	b[0x71] = 0x00 // txenable
+	b[0x71] = 0x00     // txenable (Phase 5)
 	b[0x72] = 0x10 // rxcodec
 	b[0x73] = 0x04 // txcodec
 	icnBE.PutUint32(b[0x74:], 16000)

internal/cat/icomserial.go

@@ -210,17 +210,25 @@ func (b *IcomSerial) Connect() error {
 		go b.netScopeFeeder(sc.ScopeChan(), b.readerDone)
 	}
 
-	// Best-effort model identification: ask the rig for its own CI-V address.
+	// Best-effort model identification: ask the rig for its own CI-V address. The
+	// 0x19 ID read returns the rig's FACTORY default address (e.g. 0x94 for an
+	// IC-7300) regardless of the address it's currently OPERATING on — so it's the
+	// reliable model signal even when the user runs the rig at a non-default CI-V
+	// address (a common trick to make CAT "just work" at 0x98).
+	idAddr := b.rigAddr // fallback: the configured address if the ID read fails
 	if err := b.write(civ.CmdReadID, civ.SubPTT); err == nil {
 		if f, err := b.recv(icomReadTimeout, func(d civ.Decoded) bool {
 			return d.Cmd == civ.CmdReadID && len(d.Data) >= 2 && d.Data[0] == 0x00
 		}); err == nil {
 			b.model = civ.ModelName(f.Data[1])
+			idAddr = f.Data[1]
 		}
 	}
 	// Dual-scope rigs (IC-7610/9700) prefix each waveform frame with a main/sub
-	// selector byte; single-scope rigs (IC-7300…) do not.
+	// selector byte; single-scope rigs (IC-7300…) do not. Decide from the
-	b.dualScope = b.rigAddr == 0x98 || b.rigAddr == 0xA2
+	// IDENTIFIED model, NOT the configured address: an IC-7300 run at 0x98 must
+	// still parse single-scope frames (this was the "scope blank on the 7300" bug).
+	b.dualScope = idAddr == 0x98 || idAddr == 0xA2
 	// Defer the DSP snapshot until the rig actually answers CI-V. Over the network
 	// the rig may still be booting (or off) at Connect, so an immediate readDSP
 	// would time out and leave every control at 0 / off with no retry. ReadState
@@ -590,7 +598,7 @@ func (b *IcomSerial) scopeLoop(spec chan civ.Decoded, done chan struct{}) {
 				}
 				continue
 			}
-			if rawN < 4 {
+			if rawN < 24 {
 				rawN++
 				applog.Printf("icom scope raw #%d: len=%d data=[% X]", rawN, len(f.Data), f.Data)
 			}
@@ -696,6 +704,13 @@ func (b *IcomSerial) assembleSweep(regions map[byte][]byte, total byte) {
 // and 0x27 0x11 turns the waveform data OUTPUT over CI-V on. While on, the reader
 // routes every 0x27 frame to scopeLoop.
 func (b *IcomSerial) SetScope(on bool) error {
+	if on {
+		// Context for the scope-diagnostic log: which rig + whether we expect the
+		// dual-scope (main/sub) frame layout. If the IC-7300 (single scope) streams
+		// but nothing shows, compare its `icom scope raw` frames against this.
+		applog.Printf("icom scope: enable on rig=%q addr=0x%02X dualScope=%v (expect %s frame layout)",
+			b.model, b.rigAddr, b.dualScope, map[bool]string{true: "27 00 [MS] [seq] [total] …", false: "27 00 [seq] [total] …"}[b.dualScope])
+	}
 	// Some firmwares don't ack 0x27 sets; a timeout here isn't fatal, so log and
 	// continue rather than abort the second command.
 	if err := b.exec(civ.CmdScope, civ.SubScopeOnOff, boolByte(on)); err != nil {

internal/cat/omnirig.go

@@ -414,6 +414,16 @@ func (o *OmniRig) SetPTT(on bool) error {
 		debugLog.Printf("OmniRig.SetPTT error: %v", err)
 		return fmt.Errorf("set Tx=%s: %w", name, err)
 	}
+	// Read the Tx param straight back. OmniRig is async — this may still show the
+	// previous value for a poll cycle — but if a key/unkey NEVER changes it, the
+	// write was coalesced or the rig isn't honouring PM_TX/PM_RX (wrong .ini).
+	if v, err := oleutil.GetProperty(o.rig, "Tx"); err == nil {
+		txState := "PM_RX"
+		if v.Val&pmTX != 0 {
+			txState = "PM_TX"
+		}
+		debugLog.Printf("OmniRig.SetPTT: Tx readback = 0x%X (%s)", v.Val, txState)
+	}
 	return nil
 }
 

internal/extsvc/eqsl.go

@@ -53,6 +53,91 @@ func eqslPost(ctx context.Context, client *http.Client, user, pswd, adif string)
 	return msg, nil
 }
 
+// eQSL Inbox download endpoint + base host. DownloadInBox.cfm builds an ADIF of
+// the account's *received* eQSLs (confirmations) and returns an HTML page that
+// links to the generated .adi file; we then fetch that file (two-step API).
+const (
+	eqslDownloadInboxURL = "https://www.eQSL.cc/qslcard/DownloadInBox.cfm"
+	eqslBaseURL          = "https://www.eQSL.cc"
+)
+
+// eqslAdiHrefRe pulls the generated .adi path out of the DownloadInBox reply,
+// e.g. `<A HREF="/qslcard/downloadedfiles/xxxx.adi">`.
+var eqslAdiHrefRe = regexp.MustCompile(`(?i)href="(/[^"]+\.adi)"`)
+
+// DownloadEQSLConfirmations fetches the account's Inbox (received eQSLs =
+// confirmations) as ADIF text. since is "YYYY-MM-DD" (only QSLs received since
+// then, incremental "last download"); qthNick comes from the config when the
+// account has several QTH profiles.
+func DownloadEQSLConfirmations(ctx context.Context, client *http.Client, cfg ServiceConfig, since string) (string, error) {
+	user := strings.ToUpper(strings.TrimSpace(cfg.Username))
+	if user == "" || strings.TrimSpace(cfg.Password) == "" {
+		return "", fmt.Errorf("eqsl: username/password not set")
+	}
+	if client == nil {
+		client = &http.Client{Timeout: 120 * time.Second}
+	}
+	q := url.Values{}
+	q.Set("UserName", user)
+	q.Set("Password", cfg.Password)
+	if nick := strings.TrimSpace(cfg.QTHNickname); nick != "" {
+		q.Set("QTHNickname", nick)
+	}
+	if s := eqslRcvdSince(since); s != "" {
+		q.Set("RcvdSince", s) // eQSL wants YYYYMMDDHHMM
+	}
+
+	// Step 1: ask eQSL to build the inbox ADIF; the reply is HTML linking to it.
+	page, err := eqslGet(ctx, client, eqslDownloadInboxURL+"?"+q.Encode())
+	if err != nil {
+		return "", err
+	}
+	if reason := authErrEQSL(page); reason != "" {
+		return "", fmt.Errorf("eqsl: %s", reason)
+	}
+	m := eqslAdiHrefRe.FindStringSubmatch(page)
+	if m == nil {
+		// eQSL reports problems inline ("Error: …", or "no QSLs" wording).
+		return "", fmt.Errorf("eqsl: no download link in response: %s", eqslReason(page))
+	}
+
+	// Step 2: fetch the generated .adi file.
+	adif, err := eqslGet(ctx, client, eqslBaseURL+m[1])
+	if err != nil {
+		return "", fmt.Errorf("eqsl: fetch adif: %w", err)
+	}
+	return adif, nil
+}
+
+// eqslGet does a plain GET and returns the body as text (32 MB cap), erroring on
+// a non-200 status.
+func eqslGet(ctx context.Context, client *http.Client, u string) (string, error) {
+	req, err := http.NewRequestWithContext(ctx, http.MethodGet, u, nil)
+	if err != nil {
+		return "", fmt.Errorf("eqsl: build request: %w", err)
+	}
+	resp, err := client.Do(req)
+	if err != nil {
+		return "", fmt.Errorf("eqsl: request failed: %w", err)
+	}
+	defer resp.Body.Close()
+	b, _ := io.ReadAll(io.LimitReader(resp.Body, 32*1024*1024))
+	if resp.StatusCode != http.StatusOK {
+		return "", fmt.Errorf("eqsl: http %d", resp.StatusCode)
+	}
+	return string(b), nil
+}
+
+// eqslRcvdSince converts the app's "YYYY-MM-DD" into eQSL's RcvdSince format
+// "YYYYMMDDHHMM" (midnight). Empty in → empty out (full pull).
+func eqslRcvdSince(since string) string {
+	s := strings.ReplaceAll(strings.TrimSpace(since), "-", "")
+	if len(s) == 8 { // YYYYMMDD → append 0000 (00:00)
+		return s + "0000"
+	}
+	return s
+}
+
 // authErrEQSL returns a reason when the response signals bad credentials, else
 // "". eQSL replies "Error: No match on eQSL_User/eQSL_Pswd".
 func authErrEQSL(body string) string {

internal/qso/qso.go

@@ -1890,6 +1890,19 @@ func (r *Repo) MarkQRZConfirmed(ctx context.Context, id int64, date string) erro
 	return nil
 }
 
+// MarkEQSLConfirmed stamps EQSL_QSL_RCVD=Y and the received date on a QSO after
+// an eQSL Inbox download. date is an ADIF YYYYMMDD string.
+func (r *Repo) MarkEQSLConfirmed(ctx context.Context, id int64, date string) error {
+	_, err := r.db.ExecContext(ctx,
+		`UPDATE qso SET eqsl_rcvd = 'Y', eqsl_rcvd_date = ?,
+		   updated_at = ? WHERE id = ?`,
+		date, db.NowISO(), id)
+	if err != nil {
+		return fmt.Errorf("mark eqsl confirmed %d: %w", id, err)
+	}
+	return nil
+}
+
 // MarkLoTWConfirmed stamps LOTW_QSL_RCVD=Y and the received date on a QSO
 // after a LoTW confirmation download. date is an ADIF YYYYMMDD string.
 func (r *Repo) MarkLoTWConfirmed(ctx context.Context, id int64, date string) error {

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.19.1"
+	appVersion = "0.19.2"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.

wiki/Amplifiers-and-Switches.md

@@ -0,0 +1,23 @@
+# Amplifiers and Switches
+
+## PowerGenius XL (4O3A) amplifier
+
+Direct TCP connection (Settings → PowerGenius):
+
+- **Operate / Standby** and **fault** display.
+- **Fan-mode** selector (Standard / Contest / Broadcast).
+- When a Flex is connected, the amp controls + its **FWD / ID / TEMP** meters
+  appear in the FlexRadio panel's Amplifier card. See [[FlexRadio]].
+
+## Antenna Genius (4O3A) antenna switch
+
+Over TCP / GSCP — a docked **A/B antenna-switch** widget:
+
+- One row per configured antenna, with a **Port A** and **Port B** button.
+- Colours: green = selected on port A, blue = selected on port B, red (pulsing) =
+  that port is transmitting. Clicking a selected port deselects it (→ None).
+- **Band filter** (funnel icon in the header): shows only the antennas configured
+  for the current band, like the native app. Toggle it off to see all antennas.
+  Antennas with an unknown band mask are always shown.
+
+Configure the host / password in Settings → Antenna Genius.

wiki/Audio-and-Keyers.md

@@ -0,0 +1,36 @@
+# Audio and Keyers
+
+## CW keyer
+
+A CW keyer with **macros** and F-key macros. The keyer **engine** is selectable
+(Settings → CW Keyer):
+
+- **WinKeyer** — K1EL WK1/2/3 over a COM port.
+- **Icom** — the radio's own keyer over CI-V, no extra hardware. Works over the
+  remote link too. (Requires the Icom CAT backend; set break-in to SEMI/FULL or
+  the rig keys the sidetone but stays in RX.)
+- **TCI** — for TCI backends.
+
+## Digital Voice Keyer (DVK)
+
+Record **F1–F6** voice messages and transmit them. Set the audio devices, PTT
+method and gains in Settings → Audio.
+
+- **PTT** method: CAT, RTS, DTR, or none (VOX).
+- **Test PTT** keys the rig briefly. On CAT/OmniRig the key is held ~1.5 s so the
+  transmit command is actually sent (OmniRig is asynchronous and coalesces rapid
+  writes).
+
+## QSO audio recording
+
+Continuous rolling capture. On **Log QSO** the contact is saved to a per-QSO WAV
+(`CALL_YYYYMMDD_HHMMSS.wav`), mixing RX + mic. Configure the recordings folder,
+format (WAV / MP3), pre-roll and gains in Settings → Audio.
+
+## RX audio monitor (USB rigs)
+
+Settings → Audio → **Listen to radio** pipes the rig's received audio (its "USB
+Audio CODEC" input) through your speakers, so you hear the radio inside OpsLog.
+**Talk to radio** keys PTT and pipes your mic to the rig's audio input. (Network
+audio for remote Icom is a work in progress — see
+[[Remote Icom over the Internet]].)

wiki/Awards.md

@@ -0,0 +1,47 @@
+# Awards
+
+OpsLog has a flexible awards engine. Award **definitions** and reference lists are
+shared **globally** across profiles.
+
+## Built-in awards
+
+DXCC, WAS / WAZ / WAC, WPX, IOTA / POTA / SOTA / WWFF, **DDFM** (French
+departments), and more — tracked **worked / confirmed / validated** by band and
+mode.
+
+## How matching works
+
+An award scans a **QSO field** for a reference, by one of:
+
+- **code** — the field value is the reference (e.g. state = `NY`).
+- **description** — the reference's name appears in the field (substring, case-
+  insensitive but **space-sensitive** — "Hongkong" won't match "Hong Kong").
+- **pattern** — a per-reference regex is tested against the field.
+
+Plus **OR rules** (also match if any of these hit), a **leading/trailing** strip,
+a **prefix** added to found references, and a **dynamic** mode (any value counts,
+like POTA).
+
+> **Tip — Hong Kong / Macau style mismatches:** if the data says "Hong Kong" but
+> the reference description is "Hongkong", either fix the description to match, or
+> set that OR-search's *Match by* to **pattern** so the reference's own regex
+> (e.g. `\bHong Kong\b`) is used. In *description* mode the per-reference pattern
+> is ignored.
+
+## Live detection & manual refs
+
+- References are detected **live** as you enter a callsign.
+- You can **manually assign** a reference to a QSO (stored in an ADIF extra so it
+  survives export/import — see [[Import and Export ADIF]]).
+
+## Reference lists & display
+
+- **Import reference lists** for totals and names.
+- Per award, choose what the Recent-QSOs column shows: **reference**, **name**,
+  or **both**. Award columns are opt-in per the Columns picker
+  ([[Recent QSOs and Filters]]).
+
+## Rescan
+
+**Rescan** re-pulls the logbook and recomputes — it picks up fresh LoTW / QRZ /
+eQSL confirmations (see [[QSL Management]]).

wiki/CAT-Control.md

@@ -0,0 +1,49 @@
+# CAT Control
+
+OpsLog has **four native CAT backends** (Settings → CAT). Each auto-reconnects
+and connects *non-blocking*, so a powered-off radio never freezes the app.
+
+| Backend | Use it for |
+|---------|-----------|
+| **OmniRig** | Any OmniRig-supported rig (Rig 1 / Rig 2, hot-swap). |
+| **FlexRadio (SmartSDR)** | FlexRadio 6000/8000 over the TCP API. → [[FlexRadio]] |
+| **Icom CI-V** | Any Icom over **USB** *or* over the internet via its **LAN server**. → [[Icom]] · [[Remote Icom over the Internet]] |
+| **TCI** | SunSDR / ExpertSDR2 and any TCI (WebSocket) server. |
+
+Once connected, frequency / band / mode follow the radio, clicking a cluster spot
+tunes the rig, and (for Flex) cluster spots can be pushed to the panadapter.
+
+## OmniRig
+
+Pick **Rig 1** or **Rig 2** (the two OmniRig slots). Configure the actual COM
+port / baud in OmniRig's own settings. Works with anything OmniRig supports; PTT
+keying via CAT is supported where the rig's OmniRig profile exposes it.
+
+## FlexRadio
+
+Enter the radio's IP (UDP discovery assists). You get a full SmartSDR-style
+control tab — see **[[FlexRadio]]**.
+
+## Icom CI-V (USB)
+
+- **Rig model** — pick your model from the dropdown; it sets the correct **CI-V
+  address** automatically (or choose *Other* and type the hex address).
+- **COM port** + **baud** must match the radio (set *CI-V USB Echo Back* **OFF**
+  on the rig).
+- The model choice also tailors the console (e.g. attenuator steps: 20 dB on an
+  IC-7300, 6/12/18 dB on an IC-7610).
+
+Full console details: **[[Icom]]**.
+
+## TCI
+
+Enter the TCI host + port (default 40001). Gives freq / mode / PTT / split and,
+optionally, panorama spots.
+
+## Notes
+
+- The **digital sub-mode** (FT4 vs FT8) is inferred from the frequency.
+- **Per-band Flex RX/TX antennas** can be configured and are applied
+  automatically on band change (Settings → FlexRadio).
+- Split, RIT/XIT and other rig-specific features are exposed on each backend's
+  control tab where supported.

wiki/Contest-Logging.md

@@ -0,0 +1,27 @@
+# Contest Logging
+
+**Contest tab.** Pick a contest and an exchange, and OpsLog handles the rest.
+
+## Setup
+
+- **Contest** — from the built-in ADIF `CONTEST_ID` list.
+- **Exchange** — a **running serial** (auto-incrementing) or a **fixed exchange**.
+- **Window** — start / end times; QSOs outside are flagged.
+
+## While operating
+
+- OpsLog auto-fills `CONTEST_ID` and the **sent / received serials** (`STX` /
+  `SRX`).
+- **Dupe** detection flags a call already worked in the contest.
+- A live **scoreboard** tracks your progress.
+
+## Export
+
+Export the contest log to **Cabrillo** for submission (Recent QSOs → export), or
+to ADIF. See [[Import and Export ADIF]].
+
+## Tip
+
+Use **Bulk edit field** (right-click in Recent QSOs) to fix a contest field
+across many QSOs at once — e.g. set `CONTEST_ID` or an exchange string on an
+imported batch.

wiki/DX-Cluster-and-Spots.md

@@ -0,0 +1,40 @@
+# DX Cluster and Spots
+
+## Servers
+
+Add multiple cluster servers (Settings). They auto-reconnect; one is the
+**master** used for sending commands. The Cluster tab and the Main-view cluster
+pane share the same live feed.
+
+## Filter sidebar
+
+A show/hide **filter sidebar** (shared by the Cluster tab and the Main pane):
+
+- **Callsign** search, **hide worked**, **group duplicates**.
+- Filter by **band / mode / status / source**.
+
+## Per-spot status and tuning
+
+Each spot is coloured by **status** relative to your log:
+
+- **new** (entity never worked), **new-band**, **new-slot**, **worked**.
+
+Click a spot to **tune the rig** (fills the callsign into the entry strip). A
+multi-band **Band Map** shows panadapter-style strips per band.
+
+**POTA** spots are tagged with their park reference (via `api.pota.app`).
+
+## Sending a spot
+
+Use the **Send Spot** window to announce a DX spot on the master cluster:
+callsign + frequency + a message. The frequency defaults to the **live CAT
+frequency** (full resolution, including sub-kHz).
+
+## Spot alerts
+
+**Tools → Alert management** — Log4OM-style alert rules on **call / country /
+band / mode / spotter**, with **sound**, **visual** and **e-mail** notification.
+Active alerts appear as a discreet bell in the entry strip; click it for the
+list. Alerts are kept briefly and only shown when active.
+
+See also: [[Maps and Antennas]] for turning the beam to a spot.

wiki/FlexRadio.md

@@ -0,0 +1,54 @@
+# FlexRadio
+
+When the CAT backend is a **FlexRadio (SmartSDR)**, OpsLog shows a full
+SmartSDR-style control panel (as a Main-view pane or the FlexRadio tab). It talks
+the radio's TCP API directly and streams live meters over UDP (VITA-49).
+
+## Slices (multi-slice)
+
+FlexRadios can run several receiver slices (A/B/C/D…). OpsLog shows **every
+in-use slice** as a row of buttons under the header:
+
+- Click a slice to make it the **active** slice — the main frequency, mode, DSP
+  and spot-clicks all follow it.
+- Click a slice's **TX** badge to move the transmitter onto it.
+- **Split** is detected only when the TX slice and a same-band RX slice form a
+  genuine split; independent slices on other bands are not shown as split.
+
+Everything you do targets the **active** slice, so a second slice monitoring
+another band never hijacks your main frequency.
+
+## Header
+
+Model + RX/TX state, plus compact **PA voltage** and **PA temperature** readouts
+(temperature turns amber/red as it climbs).
+
+## Transmit
+
+RF power, tune power, **TUNE**, **MOX**, **SPLIT**, speech processor (NOR / DX /
+DX+), VOX (+ level + delay), monitor (+ level), mic gain, **TX filter** low/high
+cut, and the **mic profile** selector. On CW the panel switches to keyer controls
+(speed / pitch / break-in / sidetone / filter).
+
+## Receive (active slice)
+
+RX/TX antenna, AGC mode + threshold, audio level, and the noise/notch filters:
+**NB**, **WNB** (wideband noise blanker), **NR**, **ANF**, and **APF** on CW —
+each a toggle plus level. Filter-width presets per mode.
+
+## Amplifier (PowerGenius XL)
+
+If a PowerGenius XL is detected, its **OPERATE / STANDBY**, **fan mode** and
+**fault** show in an Amplifier card, with the amp's FWD / ID / TEMP meters
+inline. See [[Amplifiers and Switches]].
+
+## Meters
+
+Live UDP meters under the slices: **S-meter** (S-units, click → fill RST),
+**forward power** (W), **SWR**, **mic** level (−40…+10 dB, red = overdrive) and
+**compression**. PA voltage and temperature are in the header.
+
+## Antennas per band
+
+Configure Flex **RX/TX antennas per band** (Settings → FlexRadio); OpsLog applies
+them automatically on band change.

wiki/Getting-Started.md

@@ -0,0 +1,59 @@
+# Getting Started
+
+This walks you from a fresh install to your first logged QSO.
+
+## 1. Set your station
+
+**Settings → Station**: enter your **callsign**, **grid locator** and **name**.
+These feed callsign lookups, the map, awards, the QSL card and the "my station"
+ADIF fields on every QSO.
+
+## 2. (Optional) Connect a radio
+
+**Settings → CAT**, pick a backend and fill its fields — see [[CAT Control]].
+Once connected, the frequency, band and mode fill in automatically as you tune,
+and clicking a cluster spot tunes the rig.
+
+You can log perfectly well **without** a radio — just type the band, mode and
+frequency.
+
+## 3. The entry strip
+
+The strip across the top is the heart of OpsLog (Log4OM-style):
+
+- **Callsign** — type it and the contacted entity's **flag** appears next to the
+  RST fields; the country, CQ/ITU zones and continent resolve offline from
+  `cty.dat`. If QRZ/HamQTH lookup is configured, name / QTH / grid auto-fill and
+  a photo shows in the F2 tab.
+- **RST sent / rcvd**, **Name**, **QTH**, **Grid**.
+- **Band / Mode / Frequency** (TX and, for split, RX).
+- **Start / End time**, **Comment / Note**.
+
+Press **Enter** in any text field to **log** the QSO. The contact drops into
+**Recent QSOs** below.
+
+> Mode comes from the radio; the digital sub-mode (FT4 vs FT8) is inferred from
+> the frequency.
+
+## 4. Look around
+
+- **Recent QSOs** — your log; double-click a row to edit every field.
+  See [[Recent QSOs and Filters]].
+- **Worked-before matrix** — as you type a call, see if/when you worked that
+  entity, per band/mode slot.
+- **Main view** — two configurable panes (Settings → General → *Main view*): a
+  great-circle map, the cluster, the FlexRadio or Icom console, Net control, and
+  more. See [[Maps and Antennas]].
+
+## 5. Profiles
+
+Every setting is **per-profile**. A profile can log to the local SQLite file or
+a shared **MySQL** database (multi-operator). Create one per call / station /
+event. See [[Profiles and Databases]].
+
+## Next steps
+
+- Chase spots → [[DX Cluster and Spots]]
+- Track awards → [[Awards]]
+- Send confirmations → [[QSL Management]]
+- Design a card → [[QSL Card Designer]]

wiki/Home.md

@@ -0,0 +1,41 @@
+# OpsLog
+
+A modern, fast ham-radio logger for **Windows** — Log4OM-style entry, real-time
+CAT for **OmniRig**, native **FlexRadio/SmartSDR**, native **Icom CI-V** (USB
+*and* remote-over-internet, replacing RS-BA1) and **TCI** (SunSDR / Expert
+Electronics), a DX cluster with spot alerts, awards tracking, maps, contest
+logging, QSL management and a QSL-card designer.
+
+Built with **Wails v2** (Go backend + React/TypeScript frontend), **pure Go**
+(no CGO). SQLite holds the configuration; the logbook can be the local SQLite
+file *or* a **shared MySQL** database so several operators run one log. Fully
+themeable and bilingual (English / French).
+
+Developed by **F4BPO**.
+
+## New here? Read these first
+
+1. **[[Installation]]** — download / build and first launch.
+2. **[[Getting Started]]** — the entry strip, logging your first QSO, choosing a
+   profile.
+3. **[[CAT Control]]** — connect your radio (OmniRig, FlexRadio, Icom, TCI).
+
+## What OpsLog does
+
+| Area | Pages |
+|------|-------|
+| Enter and manage QSOs | [[Logging Basics]] · [[Recent QSOs and Filters]] · [[Import and Export ADIF]] |
+| Control your radio | [[CAT Control]] · [[FlexRadio]] · [[Icom]] · [[Remote Icom over the Internet]] |
+| Chase DX | [[DX Cluster and Spots]] · [[Maps and Antennas]] |
+| Station hardware | [[Amplifiers and Switches]] · [[Audio and Keyers]] |
+| Events & contests | [[Contest Logging]] · [[Net Control]] · [[Multi-Operator Live Status]] |
+| Confirmations | [[Awards]] · [[QSL Management]] · [[QSL Card Designer]] |
+| Configuration | [[Settings and Data]] · [[Security]] · [[Profiles and Databases]] |
+| Something wrong? | [[Troubleshooting]] |
+
+## Design in one line
+
+Everything you configure (settings, profiles, rigs, cluster nodes, award lists,
+QSL templates, lookup cache) lives in a **local SQLite** file so the UI is
+instant. Only the **QSOs** live where the active profile points them — local
+SQLite or a shared MySQL. See [[Profiles and Databases]].

wiki/Icom.md

@@ -0,0 +1,55 @@
+# Icom
+
+When the CAT backend is **Icom CI-V** (USB or network), OpsLog shows a full
+RS-BA1-style console — the same panel whether you're on USB or remote.
+
+For setup, see [[CAT Control]]; for the internet link, see
+[[Remote Icom over the Internet]].
+
+## Choosing your model
+
+Pick your model from the **Rig model** dropdown in Settings → CAT — it sets the
+CI-V address and tailors the console to the radio (e.g. attenuator steps).
+The model is also auto-detected from the radio's CI-V ID.
+
+## Console
+
+- **Twin VFO readout** (MAIN / SUB): big tabular frequency, mode badge, band, and
+  RIT/ΔTX offset, with a **mode-button row** (SSB / CW / RTTY / PSK / AM / FM).
+- **Spectrum scope + waterfall**: ON/OFF, CTR/FIX, double-click to tune, and
+  **◀ ⊙ ▶** to centre the scope on the current frequency (±50 kHz) and pan.
+- **Live meters** always visible: S-meter (click → fill RST), power in watts, SWR.
+- **Receive DSP:** AF / RF gain, squelch, AGC, preamp, **attenuator** (steps match
+  the model — e.g. 20 dB on an IC-7300, 6/12/18 dB on an IC-7610), filter
+  (FIL1/2/3), NB, NR, ANF, and — **on CW only** — the **APF** (audio peak filter).
+- **Passband / notch:** Twin PBT (inner / outer) and manual notch + position.
+- **Transmit:** RF power, MOX, TUNE, **split with automatic offset** (+5 kHz SSB /
+  +1 kHz CW), monitor. On **voice modes only**: mic gain, compressor, VOX (+ gain
+  + anti-VOX). Controls that don't apply to the current mode are hidden.
+- **Bands & antenna:** one-touch band buttons, ANT1/ANT2.
+- **Clarifiers:** RIT and ΔTX, wheel / ± tuning (Ctrl + ← / → nudges RIT).
+
+## Power ON / OFF
+
+- **Network:** ON and OFF buttons are shown — the radio's LAN server answers even
+  in standby, so ON works.
+- **USB:** the buttons are **hidden**. Over USB the CI-V interface is unpowered
+  while the rig is off, so a power-ON command can't reach it — turn the radio on
+  physically.
+
+The app never wakes the rig on connect (manual by design).
+
+## CW keying
+
+CW can run through the **radio's own keyer** over CI-V — no extra hardware, and
+it works over the remote link too. See [[Audio and Keyers]].
+
+## Model-specific notes
+
+- **IC-7300 / IC-705 / IC-9100:** single-receiver, single-step attenuator
+  (20 dB); the IC-9100 is USB-only (no LAN server).
+- **IC-7610 / IC-9700:** dual scope (main/sub); stepped attenuator; LAN server
+  for remote.
+- If the **scope is blank on a single-scope rig run at a non-default CI-V
+  address**, OpsLog now detects the model from the CI-V ID, not the configured
+  address, so it decodes single-scope frames correctly.

wiki/Import-and-Export-ADIF.md

@@ -0,0 +1,32 @@
+# Import and Export ADIF
+
+OpsLog is **ADIF 3.1.7 compliant**: a full field dictionary, 30 promoted columns,
+a generic "extra fields" editor for anything not promoted, and standard/all
+export modes.
+
+## Import
+
+Import an `.adi` / `.adif` file into the active profile's logbook. On import,
+OpsLog parses every field, maps standard fields to columns and keeps unknown but
+valid ADIF fields in a per-QSO **extras** store (editable later). Country / zones
+are enriched from `cty.dat` where missing.
+
+## Export
+
+- **Whole log**, **selected rows**, or the **filtered view** (no limit) — see
+  [[Recent QSOs and Filters]].
+- **Standard** mode exports the common promoted fields; **All** mode also exports
+  every extra field.
+- **Cabrillo** export for contest submission.
+
+## Round-trip safety
+
+Award references you assign manually are stored in an ADIF extra field
+(`APP_OPSLOG_AWARDREFS`), so exporting your full log and re-importing it does not
+lose your award-reference assignments.
+
+## Tips
+
+- To move a batch of QSOs between logs, export selected → import into the other
+  profile.
+- Use **Find duplicates** (Tools) after importing to catch overlaps.

wiki/Installation.md

@@ -0,0 +1,44 @@
+# Installation
+
+OpsLog is a single Windows executable — no installer, no runtime to add. Pure Go
++ an embedded WebView2 (present on Windows 10/11 by default).
+
+## Download and run
+
+1. Grab the latest `OpsLog.exe` from the project's **Releases** page.
+2. Put it in its own folder (it will create a `data/` folder next to itself).
+3. Double-click to run. On first launch you pick a **language** (English /
+   French) and OpsLog creates its local database.
+
+> **Where is my data?** A `data/` folder is created next to the executable,
+> holding the SQLite config + local logbook, QSL templates, recordings and
+> backups. Keep the exe and `data/` together, or back up `data/`. See
+> [[Settings and Data]].
+
+## Building from source (developers)
+
+OpsLog is built with **Wails v2.11**.
+
+```bash
+# Dev — Vite hot-reload; Go methods reachable at http://localhost:34115
+wails dev
+
+# Production build → build/bin/OpsLog.exe
+wails build
+
+# Regenerate Go↔TS bindings after changing exported App methods
+wails generate module
+```
+
+Prerequisites: Go, Node.js, and the Wails CLI (`~/go/bin/wails.exe`). No CGO /
+C toolchain is needed.
+
+## First-run checklist
+
+- **Settings → General** — language, theme, and the two Main-view panes.
+- **Settings → Station** — your callsign, grid, name (used for lookups, awards,
+  QSL cards and the map).
+- **Settings → CAT** — connect your radio ([[CAT Control]]).
+- **Settings → Lookup** — QRZ.com / HamQTH credentials for callsign lookup.
+
+Continue with **[[Getting Started]]**.

wiki/Logging-Basics.md

@@ -0,0 +1,45 @@
+# Logging Basics
+
+## The entry strip
+
+The entry strip logs a QSO from any `<input>` inside it — press **Enter** to
+save. Fields: callsign, RST tx/rx, name, QTH, grid, band, mode, TX/RX frequency
+(split), start/end time, comment and note.
+
+- **Callsign** drives everything: the **flag**, offline DXCC resolution (country,
+  CQ/ITU zones, continent) from `cty.dat` including `/MM` `/AM` `/B` and call-area
+  handling (`/8`, `/W6`), plus **ClubLog** DXpedition date overrides.
+- **Callsign lookup** (QRZ.com / HamQTH) fills name / QTH / grid and shows the
+  photo and a QRZ.com tab. Configure it in Settings → Lookup.
+- **ESC** clears the callsign (and stops CW).
+
+## Editing a QSO
+
+Double-click any row in **Recent QSOs** (or Worked-before) to open the full
+editor — every ADIF field across tabs: QSO info, contacted station's details,
+award refs, QSL info, contest, sat/prop, my station, and a generic **extra
+fields** editor for any ADIF field not promoted to a column.
+
+## Bulk operations
+
+Select rows in Recent QSOs, right-click:
+
+- **Fix country & zones** from `cty.dat`, or **update from QRZ / ClubLog**.
+- **Bulk edit field** — set one field across many QSOs (QSL/upload status, my
+  station, contest, propagation, contacted-station refs, comment…). Great for
+  flipping a batch to *Requested* before an upload.
+- **Send to** a QSL service, **export** selected / filtered to ADIF or Cabrillo,
+  **delete**.
+
+## Find duplicates
+
+**Tools → Find duplicates** groups QSOs by same **call + band + mode** (optionally
+same day or same minute) and lets you pick which to delete.
+
+## Notes
+
+- **Worked-before matrix** shows prior contacts with the entity per band/mode
+  slot as you type.
+- Awards references are detected **live** as you enter a call (see [[Awards]]).
+
+See also: [[Recent QSOs and Filters]] · [[Import and Export ADIF]]

wiki/Maps-and-Antennas.md

@@ -0,0 +1,38 @@
+# Maps and Antennas
+
+## Main view
+
+The Main view is **two configurable panes** (per profile, Settings → General →
+*Main view*). Choose from: great-circle map, locator (street) map, the cluster
+grid, the worked-before grid, recent QSOs, the **FlexRadio** controls, the
+**Icom** console, or the **Net control** panel.
+
+## Great-circle map
+
+- Short/long-path **distance & azimuth** to the worked station.
+- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite (all
+  labelled).
+- The **antenna beam lobe(s)** are drawn from the rotor azimuth.
+
+## Locator (street) map
+
+An OSM street map centred on the contacted grid square — handy for local /
+portable contacts. No API key.
+
+## Rotor compass
+
+An azimuthal-equidistant **click-to-turn** compass driven by **PstRotator**. The
+current heading and target are shown; click a bearing to turn the rotor.
+
+## Ultrabeam
+
+Ultrabeam antennas are supported with three modes — **Normal**, **180° reverse**,
+**Bidirectional**:
+
+- The **radiating direction** is shown in green and the **mechanical boom** in
+  grey, on both the compass and the map, so you always know where the antenna
+  actually points.
+- The antenna **follows the rig frequency** (band change → retune), and retunes
+  immediately when you click a spot.
+
+Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch).

wiki/Multi-Operator-Live-Status.md

@@ -0,0 +1,42 @@
+# Multi-Operator Live Status
+
+For a **multi-op special-event call** on a shared MySQL logbook (e.g. TM74TFR),
+OpsLog can publish who is on the air, on which band/mode/frequency, as a live
+page you embed on the station's **QRZ.com** bio.
+
+## Enable it
+
+1. Point the profile's logbook at a **shared MySQL** database
+   ([[Profiles and Databases]]).
+2. **Settings → General → Publish live operator status.**
+
+Each OpsLog instance then heartbeats its current activity (operator call, band,
+frequency, mode) into a `live_status` table every ~15 s. OpsLog only **writes**
+to the database — it is not a web server.
+
+## The web page
+
+A small PHP renderer, `docs/livestatus/tm74-status.php`, reads that table and
+produces a live page/image. Put it on **your own** web server (the one reachable
+from the internet):
+
+1. Edit the credentials at the top: `$DB_HOST`, `$DB_PORT`, `$DB_NAME`,
+   `$DB_USER`, `$DB_PASS` — pointing at the **same** MySQL as OpsLog's logbook.
+2. Embed it on QRZ (QRZ strips `<script>`/`<iframe>`, so use an image):
+
+   ```html
+   <img src="https://your-server/tm74-status.php?img=1">
+   ```
+
+   or link the real-time page: `https://your-server/tm74-status.php`.
+
+## Troubleshooting the PHP page
+
+- **`Connection refused`** — MySQL is refusing the connection. Most common cause:
+  the server's `bind-address` is `127.0.0.1` (localhost only). Set it to the LAN
+  IP / `0.0.0.0`, grant the `opslog` user for the web server's IP, and open the
+  firewall.
+- **Runs on a non-standard MySQL port** — set `$DB_PORT` and pass it as the 5th
+  `mysqli` argument (the shipped script already does).
+- Redeploy the current `tm74-status.php` if you edited an old copy — the shipped
+  version fails gracefully instead of throwing a PHP fatal error.

wiki/Net-Control.md

@@ -0,0 +1,30 @@
+# Net Control
+
+**Directed-net logging** (Tools → Net) — run a directed net or round-table and
+log the whole thing at once, Log4OM-style.
+
+## How it works
+
+- **Roster** (right) — the net's registered stations, stored globally in
+  `nets.json` (shared across profiles). Add contacts with a QRZ/HamQTH prefill.
+- **On-air** (left) — the active session (in memory): put a station on the air
+  (check it in), and log the whole net when done.
+- Frequency / band / mode of each logged QSO come from **live CAT** at log time
+  (falling back to the last known values if CAT is off).
+
+## Working a net
+
+1. Open / create a net and **Open** it.
+2. Double-click a roster station (or use *Put on air*) to put it on the air —
+   this starts its QSO (time on).
+3. Double-click an on-air row to open the full QSO editor (edit any field).
+4. **Log & end** a station to write its QSO to the logbook (time off = now).
+
+## Worked-before
+
+Click a station (on air or in the roster) to see prior contacts with it in the
+**worked-before** panel below the on-air column. The panel height is adjustable
+(drag its top edge).
+
+> The active session is in-memory only — closing the app mid-net drops
+> un-logged on-air stations.

wiki/Profiles-and-Databases.md

@@ -0,0 +1,35 @@
+# Profiles and Databases
+
+## Profiles
+
+Every setting in OpsLog is **per-profile**: station identity, CAT, lookup, QSL
+defaults, awards display, antennas, and which logbook to use. Create one profile
+per callsign / station / event.
+
+Switch or manage profiles in Settings. The active profile decides which logbook
+your QSOs go to.
+
+## Config vs. logbook — two different stores
+
+| Store | What | Where |
+|-------|------|-------|
+| **Config** | settings, profiles, rigs/antennas, cluster nodes, lookup cache, award lists, QSL templates | always the **local SQLite** file under `data/` |
+| **Logbook** | your QSOs | where the active profile points — local SQLite **or** shared MySQL |
+
+Keeping config local means the UI is instant even when the logbook is a far-away
+MySQL server.
+
+## Shared MySQL logbook (multi-operator)
+
+Point a profile's logbook at a **MySQL** database so several operators run **one
+log** — e.g. a multi-op special-event call. Configure the host / database /
+credentials in the profile's database settings.
+
+This is also what powers [[Multi-Operator Live Status]] (each instance heartbeats
+its activity into a `live_status` table).
+
+## Backups
+
+Optional **database + ADIF backup at shutdown** (Settings → Backup). Regardless,
+copying the `data/` folder backs up your config and local logbook. See
+[[Settings and Data]].

wiki/QSL-Card-Designer.md

@@ -0,0 +1,35 @@
+# QSL Card Designer
+
+**Tools → QSL Card Designer…** turns a few photos into a polished eQSL card.
+
+## Design flow
+
+1. **Pick 1–6 photos** (jpeg/png). OpsLog analyses them offline (detail /
+   luminance grid) and proposes **3 designs** — callsign placed in the calmest
+   zone of the best photo, operator name, CQ/ITU zones + locator line, country
+   flag, the other photos as bordered inserts, and a per-QSO confirmation box.
+2. **Fine-tune**: click an element to select, drag to move; change font / style
+   preset (gel gold, gel silver, classic white outline, script, flat) and the
+   per-preset knobs on the right. The **QSO info box** has opacity, background
+   colour, corner radius, title and text-colour controls.
+3. **Save** the template. Photos are copied into
+   `data/qsl/templates/<id>/` (the originals can move afterwards). One template
+   can be the **default per profile**.
+
+## Sending
+
+Right-click a QSO → **Send eQSL by e-mail**. The card is rendered with that QSO's
+data, rasterised to a ≤ 800 KB JPEG, archived in `data/qsl/outbox/`, and sent via
+the configured SMTP account to the address from the QRZ/HamQTH lookup. On success
+the QSO is stamped `EQSL_SENT=Y`.
+
+The e-mail subject/body templates live in the designer, with
+`{CALL} {DATE} {BAND} {MODE} {MYCALL}` variables.
+
+## Fonts & flags
+
+Fonts: Archivo Black, Lilita One, Baloo 2, Oswald, Great Vibes, Allura (all OFL,
+embedded); Cooper Black is offered when MS Office installed it. Flags:
+flag-icons (MIT), embedded for the commonly-worked DXCC entities.
+
+See also: [[QSL Management]].

wiki/QSL-Management.md

@@ -0,0 +1,44 @@
+# QSL Management
+
+**Tools → QSL Manager.** Upload and download confirmations for the online QSL
+services, and manage paper QSL.
+
+## Services
+
+| Service | Upload | Download confirmations |
+|---------|:------:|:----------------------:|
+| **LoTW** | ✔ (via TQSL) | ✔ |
+| **QRZ.com** | ✔ | ✔ |
+| **eQSL** | ✔ | ✔ |
+| **ClubLog** | ✔ (batched ADIF) | — |
+| **HRDLog** | ✔ | — |
+| **POTA** | hunter-log sync | ✔ (park tags) |
+| **Paper** | — | set sent/received + via |
+
+## Uploading
+
+Pick a service, find the QSOs (by callsign or a filter), select and upload.
+**Bulk edit field** (right-click in Recent QSOs) flips a batch's upload status to
+*Requested* first, if you gate uploads that way.
+
+## Downloading confirmations
+
+Pick a service and a **date window** (All / Since last download / a date), then
+**Download confirmations**. OpsLog matches each confirmation to your log
+(call + minute + band + mode), stamps it (`LOTW_RCVD`, `EQSL_RCVD`,
+`QRZ download`…), and optionally **adds not-found** QSOs. Downloading
+auto-refreshes the **award** stats.
+
+- **LoTW** and **paper QSL** are the award-valid confirmations for ARRL awards;
+  eQSL / QRZ count only against their own confirmations.
+- **LoTW upload** goes through **TQSL** (ARRL's signer) — set the TQSL path and
+  station location in Settings.
+
+## E-mail eQSL
+
+Right-click a QSO → **Send eQSL by e-mail** via the configured SMTP account. The
+[[QSL Card Designer]] card is rendered with that QSO's data and sent to the
+address found by the QRZ/HamQTH lookup.
+
+> Outlook/Hotmail disable basic-auth SMTP — use **Gmail with an app password**,
+> or a Microsoft app password.

wiki/README-PUBLISHING.md

@@ -0,0 +1,45 @@
+# Publishing this wiki to GitHub
+
+These files are the source for the **OpsLog GitHub Wiki**. GitHub stores a wiki
+as its own git repository (`<repo>.wiki.git`), so publishing means pushing these
+`.md` files into it.
+
+## Automatic — via the release script (recommended)
+
+The release task (`.vscode/release.ps1`, VS Code → *Tasks: Run Task* → *Release
+OpsLog*) **publishes the wiki automatically** at the end of every release: it
+clones `github.com/GregTroar/OpsLog.wiki.git` to a temp folder, copies every page
+from this `wiki/` folder (except this guide), and pushes only if something
+changed. Auth reuses your GitHub git credential (set up by `gh auth login`).
+
+**One-time:** on GitHub, open the repo → **Wiki** tab → *Create the first page* →
+Save. This initialises the wiki repo so the script's clone succeeds.
+
+## Manual (if you want to push between releases)
+
+```bash
+# One-time: clone the wiki repo NEXT TO the project (not inside it)
+git clone https://github.com/GregTroar/OpsLog.wiki.git
+
+# Then, to update:
+cp wiki/*.md ../OpsLog.wiki/          # (skip README-PUBLISHING.md if you like)
+cd ../OpsLog.wiki
+git add . && git commit -m "Update wiki" && git push
+```
+
+The pages appear immediately under the repository's **Wiki** tab.
+
+## How the pages work
+
+- Each `.md` file is one wiki page. The **file name** becomes the page title and
+  URL: `Getting-Started.md` → page *Getting Started* at `.../wiki/Getting-Started`.
+- **`_Sidebar.md`** renders as the navigation sidebar on every page.
+- **`_Footer.md`** renders at the bottom of every page.
+- Link between pages with `[[Page Name]]` (wiki-link) or a normal relative link
+  `[text](Getting-Started)`.
+- `Home.md` is the wiki landing page.
+
+## Keep it in sync with the README
+
+The wiki mirrors [`README.md`](../README.md). When you add a feature, update the
+matching wiki page and the README together so they don't drift.

wiki/Recent-QSOs-and-Filters.md

@@ -0,0 +1,33 @@
+# Recent QSOs and Filters
+
+## The Recent QSOs grid
+
+The main log table. Double-click a row to edit; right-click for bulk actions
+(see [[Logging Basics]]). Columns are configurable — click **Columns** to choose
+which are visible; your selection is saved (per profile).
+
+### Award columns
+
+Each defined award can show a column with the reference the QSO counts for. These
+columns are **hidden by default** and opt-in from the Columns picker — turn on
+only the awards you're chasing. Your choice persists across restarts.
+
+## Advanced filter builder
+
+Click the filter button to open the **QSO filter builder** (Log4OM-style):
+
+- Add one or more **conditions**: *field · operator · value*.
+- Operators: equals, not-equal, contains, starts/ends with, greater/less
+  (or equal), is empty, is not empty.
+- Join conditions with **ALL (AND)** or **ANY (OR)**.
+- Save named **presets** (they travel with the `data/` folder).
+- The field dropdown is sorted alphabetically to find things fast.
+
+The filtered view can be exported: **selected rows** or the **whole filtered
+view** (no row limit) → ADIF or Cabrillo.
+
+## Worked-before matrix
+
+As you type a callsign, the worked-before grid shows prior contacts with that
+**entity**, arranged by band/mode slot, so you instantly see what's new (new
+DXCC / new band / new slot) versus already worked.

wiki/Remote-Icom-over-the-Internet.md

@@ -0,0 +1,55 @@
+# Remote Icom over the Internet
+
+OpsLog speaks the Icom radio's **built-in network protocol** directly, so it
+**replaces both the Icom Remote Utility and RS-BA1**. Radios with a LAN server —
+**IC-7610, IC-9700, IC-705, IC-7760, IC-905** — can be operated over the
+LAN/internet with the full [[Icom]] console.
+
+> The **IC-9100 has no LAN server** — it is USB-only.
+
+## On the radio (one-time)
+
+In the radio's **Network** menu:
+
+1. Enable the network / *Remote settings*.
+2. Set a **Network User1** name and password.
+3. Note the radio's **IP address** and its **CI-V address**.
+4. Make sure the Icom **Remote Utility is closed** on every PC — OpsLog binds the
+   same local UDP ports, so they can't both run.
+
+## In OpsLog
+
+Settings → CAT → backend **Icom CI-V (network / remote)**:
+
+- **Host** — the radio's IP or hostname.
+- **User / Password** — the Network User1 credentials.
+- **Rig model / CI-V address** — pick the model.
+
+Save. OpsLog logs in, obtains a session **token** (auto-renewed so control never
+drops after ~2 minutes), opens the **CI-V tunnel**, and the whole console works
+over the net — freq / mode / DSP / TX / RIT / CW / scope.
+
+## How it stays solid
+
+- **Token renewal** every ~45 s keeps the session alive.
+- **Receive-side retransmit**: under the heavy panadapter stream, lost UDP
+  packets are re-requested, so the link doesn't drop when the scope is on.
+- **Standby-tolerant**: the radio's server answers pings even when the radio is
+  off, so the session doesn't flap — the console + power ON button stay reachable.
+- **Manual power** ON / OFF (the app never wakes the rig on connect).
+
+## Audio
+
+Network **audio** is a work in progress. For now, use the radio in **USB + a
+voice link** (e.g. Mumble) alongside the network CAT, or run OpsLog on the
+station PC via remote desktop. See [[Audio and Keyers]] for the USB-monitor
+option.
+
+## Troubleshooting
+
+- **"Login rejected"** → wrong Network User1 name/password.
+- **Can't bind local port / dial fails** → the Icom **Remote Utility** is still
+  running; close it.
+- **Link drops when the scope turns on** → should be fixed by receive-side
+  retransmit; if it persists, check the log (`icom net:` lines) and network
+  quality. See [[Troubleshooting]].

wiki/Security.md

@@ -0,0 +1,24 @@
+# Security
+
+## Secret vault
+
+Opt-in **passphrase encryption** of the stored passwords (QRZ, cluster, eQSL,
+SMTP, Icom network, etc.) using **AES-GCM + PBKDF2**.
+
+- Enable it in Settings; you set a passphrase.
+- Encrypted values are marked `enc:v1:` and are **portable** (they travel with
+  the `data/` folder).
+- A single **unlock prompt at launch** decrypts them for the session.
+
+If you forget the passphrase, the encrypted secrets can't be recovered — re-enter
+them.
+
+## What OpsLog sends where
+
+- **Callsign lookups** go to QRZ.com / HamQTH with your credentials.
+- **QSL uploads/downloads** go to the services you configure (LoTW via TQSL, QRZ,
+  eQSL, ClubLog, HRDLog).
+- **Telemetry** is a once-a-day anonymous heartbeat (random install ID + version
+  + OS — no callsign, no QSO data). Opt out in Preferences.
+- Everything else stays local (or on your own MySQL / web server for the
+  multi-op live status).

wiki/Settings-and-Data.md

@@ -0,0 +1,51 @@
+# Settings and Data
+
+## Where everything lives
+
+A `data/` folder is created **next to `OpsLog.exe`**:
+
+- **Config** (SQLite): settings, profiles, rigs/antennas, cluster nodes, lookup
+  cache, award lists, QSL templates. Always local, so the UI is instant.
+- **Local logbook** (SQLite): QSOs, when the profile logs locally.
+- `data/qsl/templates/…` — QSL card templates and their photos.
+- `data/qsl/outbox/…` — sent QSL card JPEGs.
+- Recordings folder (configurable) — per-QSO WAV/MP3.
+- Backups.
+
+Back up your setup by copying `data/` (and keep it with the exe). See
+[[Profiles and Databases]] for local-vs-MySQL logbooks.
+
+## Settings map
+
+| Section | What |
+|---------|------|
+| **General** | language, theme, Main-view panes, live-status publish |
+| **Station** | your callsign, grid, name, address (my-station ADIF) |
+| **CAT** | radio backend + connection ([[CAT Control]]) |
+| **Lookup** | QRZ.com / HamQTH credentials |
+| **FlexRadio** | per-band RX/TX antennas |
+| **Audio** | DVK / recorder devices, PTT, gains, RX monitor |
+| **CW Keyer** | WinKeyer / Icom / TCI engine + macros |
+| **External services** | LoTW (TQSL), QRZ, eQSL, ClubLog, HRDLog, POTA |
+| **Email** | SMTP for eQSL-by-email |
+| **PowerGenius / Antenna Genius / Rotator / Ultrabeam** | station hardware |
+| **Backup** | database + ADIF backup at shutdown |
+
+## Appearance & language
+
+Four themes (Warm light, Warm dark, Graphite dark, High contrast) plus **Auto**
+(follows the OS). Full **English / French** UI with a first-run flag chooser and
+a switcher in Settings → General.
+
+## Integrations (outbound UDP)
+
+Push the current frequency to **PstRotator**, radio info in **N1MM `RadioInfo`**
+format, or an **ADIF record on each logged QSO** — so external tools stay in sync.
+
+## Other
+
+- **Autostart** external programs (WSJT-X, JTAlert, rotator control…) at launch,
+  skipping any already running.
+- **Update check** at startup (toggleable).
+- **Anonymous usage telemetry** — a once-a-day heartbeat (random install ID +
+  version + OS; no callsign or QSO data). Opt out in Preferences.

wiki/Troubleshooting.md

@@ -0,0 +1,58 @@
+# Troubleshooting
+
+## Where's the log file?
+
+OpsLog writes a diagnostic log. The path is shown in Settings (and can be opened
+from there). When reporting a problem, include the relevant lines — they're
+prefixed by subsystem (`Flex:`, `icom net:`, `icom scope`, `antgenius:`,
+`cluster:`, `qslmgr:log`, `audio:`…).
+
+## CAT
+
+- **Radio not connecting** — check the backend fields (COM port + baud for USB;
+  IP/credentials for network). OpsLog connects non-blocking, so it won't freeze —
+  watch the CAT status.
+- **Icom: no CAT at all over USB** — the CI-V address must match the radio; pick
+  your **model** from the dropdown (it sets the address) and set *CI-V USB Echo
+  Back* **OFF** on the rig.
+- **Icom scope blank on an IC-7300** — this was a bug where the scope decoder was
+  chosen from the configured CI-V address; it now uses the model detected from the
+  CI-V ID, so a single-scope rig run at address `0x98` decodes correctly. Update
+  to the latest build.
+- **Icom attenuator button does nothing** — the dB steps are model-specific; make
+  sure the right model is selected (IC-7300 = 20 dB, IC-7610 = 6/12/18 dB).
+
+## Remote Icom
+
+- **Login rejected** → wrong Network User1 name/password.
+- **Can't bind local port** → the Icom **Remote Utility is still running** —
+  close it.
+- **Link drops with the scope on** → receive-side retransmit should hold it; if
+  not, check network quality and the `icom net:` log lines. See
+  [[Remote Icom over the Internet]].
+
+## FlexRadio
+
+- **A control reads 0 / stale at startup** — some SmartSDR status fields use short
+  names (e.g. the TX filter is reported as `lo`/`hi`, not `filter_low/high`). If a
+  value never populates, capture the `Flex: … status` log line and report it.
+- **Antenna wrong band on a spot click** — fixed: `SetFrequency`/`SetMode` update
+  the slice cache immediately so the panel and the Ultrabeam follow don't chase a
+  stale frequency.
+
+## Multi-op live status PHP
+
+`Connection refused` from the PHP page is almost always MySQL `bind-address =
+127.0.0.1` or a firewall/grant issue — see
+[[Multi-Operator Live Status]].
+
+## DVK / PTT
+
+- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the async
+  OmniRig write is actually sent; if it still doesn't key, the rig's OmniRig
+  profile may not expose CAT TX keying — use RTS/DTR or VOX.
+
+## Still stuck?
+
+Open an issue with: what you did, what happened, your radio/model, and the
+relevant log lines.

wiki/_Footer.md

@@ -0,0 +1,2 @@
+---
+**OpsLog** — a modern ham-radio logger by **F4BPO** · [Home](Home) · [Troubleshooting](Troubleshooting) · A French README is in `README.fr.md`.

wiki/_Sidebar.md

@@ -0,0 +1,37 @@
+### OpsLog Wiki
+
+**Start here**
+- [[Home]]
+- [[Installation]]
+- [[Getting Started]]
+
+**Logging**
+- [[Logging Basics]]
+- [[Recent QSOs and Filters]]
+- [[Import and Export ADIF]]
+- [[Profiles and Databases]]
+
+**Radio control (CAT)**
+- [[CAT Control]]
+- [[FlexRadio]]
+- [[Icom]]
+- [[Remote Icom over the Internet]]
+
+**Operating**
+- [[DX Cluster and Spots]]
+- [[Maps and Antennas]]
+- [[Amplifiers and Switches]]
+- [[Audio and Keyers]]
+- [[Contest Logging]]
+- [[Net Control]]
+- [[Multi-Operator Live Status]]
+
+**QSL & Awards**
+- [[Awards]]
+- [[QSL Management]]
+- [[QSL Card Designer]]
+
+**Reference**
+- [[Settings and Data]]
+- [[Security]]
+- [[Troubleshooting]]