chore: release v0.22.8

Reported by one in the field. Kenwood's documentation gives 024 for that
radio; both are mapped rather than betting on which is right, and the log
no longer reads "Kenwood (022)".

app.go

@@ -114,6 +114,7 @@ const (
 	keyCATXieguPort       = "cat.xiegu.port"      // Xiegu CI-V serial port (G90/X6100…)
 	keyCATXieguBaud       = "cat.xiegu.baud"      // Xiegu CI-V baud (G90 default 19200)
 	keyCATXieguAddr       = "cat.xiegu.addr"      // Xiegu CI-V address (factory 0x70)
+	keyCATXieguPTTLine    = "cat.xiegu.ptt_line"  // "" | rts | dtr — G90 does not key over CI-V
 	keyCATYaesuPort       = "cat.yaesu.port"      // Yaesu CAT serial port (e.g. COM4)
 	keyCATYaesuBaud       = "cat.yaesu.baud"      // Yaesu CAT baud (FTDX10/101 default 38400)
 	keyCATKenwoodHost     = "cat.kenwood.host"    // Kenwood CAT over a network serial bridge (ser2net), "host:port"
@@ -370,6 +371,7 @@ type CATSettings struct {
 	XieguPort       string `json:"xiegu_port"`        // Xiegu CI-V serial port (G90/X6100…)
 	XieguBaud       int    `json:"xiegu_baud"`        // Xiegu CI-V baud (G90 default 19200)
 	XieguAddr       int    `json:"xiegu_addr"`        // Xiegu CI-V address (factory 0x70)
+	XieguPTTLine    string `json:"xiegu_ptt_line"`    // "", "rts" or "dtr" — how the rig is keyed
 	YaesuPort       string `json:"yaesu_port"`        // Yaesu CAT serial port (e.g. COM4)
 	YaesuBaud       int    `json:"yaesu_baud"`        // Yaesu CAT baud (FTDX10/101 default 38400)
 	KenwoodHost     string `json:"kenwood_host"`      // "host:port" of a serial-over-network bridge (ser2net, Ethernet-serial
@@ -969,8 +971,18 @@ func (a *App) startup(ctx context.Context) {
 		// burst of these lines = the frontend is being re-rendered rapidly (the
 		// "screen flickers" symptom). Shows WHAT is churning — connection flap,
 		// or freq/split/mode oscillating between slices during FT8.
-		applog.Printf("cat:state → connected=%v freq=%d rx=%d split=%v mode=%s band=%s",
-			s.Connected, s.FreqHz, s.RxFreqHz, s.Split, s.Mode, s.Band)
+		// The error goes in the line too. Without it a disconnect read
+		// "connected=false freq=0" and said nothing about WHY — the reason was in
+		// RigState.Error, which only ever reached a tooltip, so every report of
+		// "it stopped connecting" arrived without the one fact that explains it.
+		applog.Printf("cat:state → connected=%v freq=%d rx=%d split=%v mode=%s band=%s%s",
+			s.Connected, s.FreqHz, s.RxFreqHz, s.Split, s.Mode, s.Band,
+			func() string {
+				if s.Error == "" {
+					return ""
+				}
+				return " err=" + s.Error
+			}())
 		if a.ctx != nil {
 			wruntime.EventsEmit(a.ctx, "cat:state", s)
 		}
@@ -4234,6 +4246,11 @@ type QSOAwardRef struct {
 	Ref      string `json:"ref"`
 	Name     string `json:"name,omitempty"`
 	Pickable bool   `json:"pickable"`
+	// Ambiguous marks a reference the matcher found but did NOT assign, because
+	// the award allows one reference per QSO and several matched. Offered as a
+	// choice in the entry panel instead of being added silently — see
+	// award.Def.OneRefPerQSO.
+	Ambiguous bool `json:"ambiguous,omitempty"`
 }
 
 // enrichQSOForAwards fills in CQ/ITU zone, continent and DXCC entity from
@@ -4365,6 +4382,29 @@ func (a *App) ComputeQSOAwardRefs(q qso.QSO) ([]QSOAwardRef, error) {
 			out = append(out, QSOAwardRef{Code: r.Code, Ref: rf.Ref, Name: rf.Name, Pickable: pickable})
 		}
 	}
+	// A one-reference award that matched several candidates assigned none. Say so
+	// HERE, while the QSO is still on screen: an operator who only learns about it
+	// from the awards table months later has to go and find the contact again.
+	for _, d := range defs {
+		if !d.OneRefPerQSO {
+			continue
+		}
+		metas := a.awardRefMetas([]award.Def{d})[strings.ToUpper(d.Code)]
+		ex := award.Explain(d, metas, &q)
+		if len(ex.Ambiguous) == 0 {
+			continue
+		}
+		names := map[string]string{}
+		for _, m := range metas {
+			names[strings.ToUpper(m.Code)] = m.Name
+		}
+		for _, ref := range ex.Ambiguous {
+			out = append(out, QSOAwardRef{
+				Code: d.Code, Ref: ref, Name: names[strings.ToUpper(ref)],
+				Pickable: true, Ambiguous: true,
+			})
+		}
+	}
 	return out, nil
 }
 
@@ -6748,7 +6788,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if a.settings == nil {
 		return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort)
+	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort)
 	if err != nil {
 		return CATSettings{}, err
 	}
@@ -6800,6 +6840,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if n, _ := strconv.Atoi(m[keyCATXieguBaud]); n > 0 {
 		out.XieguBaud = n
 	}
+	out.XieguPTTLine = m[keyCATXieguPTTLine]
 	if n, _ := strconv.Atoi(m[keyCATXieguAddr]); n > 0 && n <= 0xFF {
 		out.XieguAddr = n
 	}
@@ -6920,6 +6961,7 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 		keyCATXieguPort:       strings.TrimSpace(s.XieguPort),
 		keyCATXieguBaud:       strconv.Itoa(s.XieguBaud),
 		keyCATXieguAddr:       strconv.Itoa(s.XieguAddr),
+		keyCATXieguPTTLine:    strings.ToLower(strings.TrimSpace(s.XieguPTTLine)),
 		keyCATYaesuPort:       strings.TrimSpace(s.YaesuPort),
 		keyCATYaesuBaud:       strconv.Itoa(s.YaesuBaud),
 		keyCATKenwoodPort:     strings.TrimSpace(s.KenwoodPort),
@@ -12743,7 +12785,12 @@ func (a *App) reloadCAT() {
 		// Xiegu G90/X6100/X6200/X5105 — CI-V, but a REDUCED command set: no scope,
 		// no DSP block, no data mode. Its own backend rather than the Icom one at
 		// another address, so we never poll a G90 for answers it cannot give.
-		a.cat.Start(cat.NewXiegu(s.XieguPort, s.XieguBaud, s.XieguAddr, s.DigitalDefault))
+		xg := cat.NewXiegu(s.XieguPort, s.XieguBaud, s.XieguAddr, s.DigitalDefault)
+		// A G90 ignores the CI-V PTT command; its interfaces key on a hardware
+		// line instead. Selected here so rigctld — and therefore WSJT-X — can
+		// actually put the rig on the air.
+		xg.SetPTTLine(s.XieguPTTLine)
+		a.cat.Start(xg)
 	case "yaesu":
 		// Native Yaesu CAT over the rig's USB/serial port — no OmniRig. Every
 		// Yaesu fault reported so far came from OmniRig's interpretation layer
@@ -15491,6 +15538,24 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 	return out
 }
 
+// IsNewUSCounty reports whether this state/county pair has never been worked.
+//
+// Same question the cluster's NEW CTY badge answers, asked for the contact
+// currently in the entry panel: county hunters want to know BEFORE the QSO ends,
+// and by the time a county shows up in the awards table the station is long
+// gone. Empty (or non-US) input is not "new" — it is unknown, and a badge on a
+// guess is worse than no badge.
+func (a *App) IsNewUSCounty(state, cnty string) bool {
+	if a.qso == nil || strings.TrimSpace(cnty) == "" {
+		return false
+	}
+	worked, err := a.qso.CountyWorked(a.ctx, state, cnty, award.USCountyKey)
+	if err != nil {
+		return false
+	}
+	return !worked
+}
+
 // ── CAT sharing (Hamlib NET rigctl server) ────────────────────────────────
 
 // catShareRig adapts the CAT manager to what the rigctld server needs. A thin

changelog.json

@@ -1,9 +1,54 @@
 [
   {
-    "version": "0.22.5",
+    "version": "0.22.8",
+    "date": "",
+    "en": [
+      "Main tab: drag the divider between the two panes to resize them. The setting is remembered and travels with the data folder; double-click the divider to even them out.",
+      "Kenwood: bytes arriving glued to the previous answer are no longer discarded, and the link starts from a clean buffer — a rig whose replies ran together could end up one answer behind and never report connected.",
+      "The CAT log line now carries the error explaining a disconnection.",
+      "Kenwood and Yaesu CAT connect again: 0.22.7 lowered the DTR and RTS lines on those ports, which stops many USB-serial interfaces from transmitting. Only Xiegu, where the problem was reported, still does it.",
+      "Kenwood: a port that opens but sends nothing is now reported differently from one sending data that does not answer, and the error quotes what arrived."
+    ],
+    "fr": [
+      "Onglet Principal : faites glisser le séparateur entre les deux volets pour les redimensionner. Le réglage est mémorisé et suit le dossier de données ; double-clic pour les égaliser.",
+      "Kenwood : les octets reçus collés à la réponse précédente ne sont plus jetés, et la liaison démarre sur un tampon vide — une radio dont les réponses s’enchaînent pouvait rester une réponse en retard et ne jamais apparaître connectée.",
+      "La ligne de journal CAT indique désormais l’erreur expliquant une déconnexion.",
+      "Le CAT Kenwood et Yaesu se connecte de nouveau : la 0.22.7 abaissait les lignes DTR et RTS sur ces ports, ce qui empêche beaucoup d’interfaces USB-série d’émettre. Seul Xiegu, où le problème avait été signalé, le fait encore.",
+      "Kenwood : un port qui s’ouvre sans rien émettre est désormais distingué d’un port qui émet sans répondre, et l’erreur cite ce qui est arrivé."
+    ]
+  },
+  {
+    "version": "0.22.7",
+    "date": "",
+    "en": [
+      "Serial CAT no longer keys the radio just by connecting: DTR and RTS are dropped on Xiegu, Yaesu and Kenwood as they already were on Icom — a Xiegu G90 behind a DE-19 went straight into transmit and stayed there.",
+      "Xiegu: choose how the rig is keyed — CI-V command, RTS or DTR. A G90 does not transmit on the CI-V command, so this is also what lets WSJT-X transmit through the shared CAT link.",
+      "A reference you assign by hand now replaces what the matcher found instead of being added to it, so a correction survives the next recompute.",
+      "Awards: an award can be marked one reference per QSO. When several references then match the same contact it keeps none and lists them, so you pick — a contact does not silently get the wrong DOK. Off by default, so an n-fer POTA activation still counts every park.",
+      "Dark themes: the calendar icon of date and date-time fields is visible again.",
+      "Live award detection now sees the QTH, name, country, comment, note and grid you typed, not just the looked-up address — an award matching on the town stayed silent until the QSO was logged.",
+      "Info (F2) panel: the fields are sized for what they hold — a wider county, narrower prefix and zones, and the address takes the space left by the bearing and distances.",
+      "Clicking in the lower half no longer draws an orange rule under the tab strip.",
+      "A green NEW badge appears on the County field in Info (F2) when the contacted US county has never been worked.",
+      "DARC DOK award updated to v2 in the catalogue: one reference per QSO."
+    ],
+    "fr": [
+      "Le CAT série ne met plus la radio en émission par le seul fait de se connecter : DTR et RTS sont abaissés sur Xiegu, Yaesu et Kenwood comme ils l'étaient déjà sur Icom — un Xiegu G90 derrière un DE-19 partait en émission et y restait.",
+      "Xiegu : choix du passage en émission — commande CI-V, RTS ou DTR. Un G90 n'émet pas sur la commande CI-V, c'est donc aussi ce qui permet à WSJT-X d'émettre via le partage CAT.",
+      "Une référence que vous affectez à la main remplace désormais ce que la détection avait trouvé au lieu de s'y ajouter : une correction survit au recalcul suivant.",
+      "Diplômes : un diplôme peut être marqué une seule référence par QSO. Si plusieurs références correspondent alors au même contact, aucune n’est retenue et elles sont listées pour que vous choisissiez — un contact ne reçoit plus silencieusement le mauvais DOK. Désactivé par défaut, donc une activation POTA n-fer compte toujours tous les parcs.",
+      "Thèmes sombres : l’icône calendrier des champs date et date-heure est de nouveau visible.",
+      "La détection des diplômes en direct voit maintenant le QTH, le nom, le pays, le commentaire, la note et le locator saisis, et plus seulement l’adresse issue de la recherche — un diplôme qui matche sur la ville restait muet jusqu’à l’enregistrement du QSO.",
+      "Panneau Info (F2) : les champs sont dimensionnés selon leur contenu — comté plus large, préfixe et zones plus étroits, et l’adresse récupère la place laissée par l’azimut et les distances.",
+      "Un clic dans la moitié basse ne trace plus de trait orange sous la barre d’onglets.",
+      "Un badge vert NOUV apparaît sur le champ Comté dans Info (F2) quand le comté américain contacté n’a jamais été travaillé.",
+      "Diplôme DARC DOK mis à jour en v2 dans le catalogue : une seule référence par QSO."
+    ]
+  },
+  {
+    "version": "0.22.6",
     "date": "",
     "en": [
-      "Cluster filters gain NEW POTA and NEW COUNTY, alongside the existing status chips.",
       "A playback that fails to start now says so in the log instead of ending silently after a tenth of a second.",
       "Replaying a recording before the previous one has finished now works: the new playback waits for the audio device to be free instead of keying the radio and releasing at once.",
       "The play button becomes a stop button while the recording is going out: it cuts the transmission and releases the PTT, and you can send it again straight away.",
@@ -15,7 +60,6 @@
       "A quiet DX cluster no longer looks like a broken one: silence stopped counting as a disconnection, so a node with few spots keeps its session, its login and its filters."
     ],
     "fr": [
-      "Les filtres du cluster gagnent NEW POTA et NEW COUNTY, à côté des pastilles de statut existantes.",
       "Une lecture qui ne démarre pas le signale désormais dans le journal, au lieu de s'arrêter en silence au bout d'un dixième de seconde.",
       "Relancer un enregistrement avant la fin du précédent fonctionne désormais : la nouvelle lecture attend que le périphérique audio soit libre, au lieu de passer en émission et de relâcher aussitôt.",
       "Le bouton de lecture devient un bouton d'arrêt pendant l'émission de l'enregistrement : il coupe l'émission et relâche le PTT, et vous pouvez le renvoyer aussitôt.",
@@ -27,6 +71,16 @@
       "Un cluster calme ne passe plus pour un cluster mort : le silence ne compte plus comme une déconnexion, donc un nœud avec peu de spots garde sa session, son login et ses filtres."
     ]
   },
+  {
+    "version": "0.22.5",
+    "date": "",
+    "en": [
+      "Cluster filters gain NEW POTA and NEW COUNTY, alongside the existing status chips."
+    ],
+    "fr": [
+      "Les filtres du cluster gagnent NEW POTA et NEW COUNTY, à côté des pastilles de statut existantes."
+    ]
+  },
   {
     "version": "0.22.4",
     "date": "",

frontend/src/App.tsx

@@ -871,6 +871,36 @@ export default function App() {
     return ALWAYS_TABS.includes(saved) ? saved : 'recent';
   });
   useEffect(() => { writeUiPref('opslog.activeTab', activeTab); }, [activeTab]);
+
+  // Main tab: how much width the LEFT pane gets, in percent. Clamped to 15..85
+  // so a pane can be made small but never dragged out of existence — recovering
+  // from that means finding a divider that is no longer on screen.
+  const [mainSplit, setMainSplit] = useState<number>(() => {
+    const n = parseFloat(localStorage.getItem('opslog.mainSplit') || '');
+    return Number.isFinite(n) && n >= 15 && n <= 85 ? n : 50;
+  });
+  useEffect(() => { writeUiPref('opslog.mainSplit', String(Math.round(mainSplit))); }, [mainSplit]);
+  const mainSplitRef = useRef<HTMLDivElement | null>(null);
+  const startMainSplitDrag = (e: React.PointerEvent) => {
+    e.preventDefault();
+    const host = mainSplitRef.current;
+    if (!host) return;
+    // Pointer capture on the divider, so dragging over a map keeps working —
+    // Leaflet would otherwise swallow the moves the moment the cursor entered it.
+    (e.currentTarget as HTMLElement).setPointerCapture(e.pointerId);
+    const onMove = (ev: PointerEvent) => {
+      const r = host.getBoundingClientRect();
+      if (r.width <= 0) return;
+      const pct = ((ev.clientX - r.left) / r.width) * 100;
+      setMainSplit(Math.min(85, Math.max(15, pct)));
+    };
+    const onUp = () => {
+      window.removeEventListener('pointermove', onMove);
+      window.removeEventListener('pointerup', onUp);
+    };
+    window.addEventListener('pointermove', onMove);
+    window.addEventListener('pointerup', onUp);
+  };
   // QSL Manager is a closable tab opened on demand from Tools → QSL Manager.
   const [qslTabOpen, setQslTabOpen] = useState(false);
   const [qslDesignerOpen, setQslDesignerOpen] = useState(false);
@@ -3719,8 +3749,10 @@ export default function App() {
   // The callsign field is WIDER than the fields around it, deliberately: it is
   // the one field always typed into, it carries the REC badges on its right, and
   // a long portable call (VK9/OH1ABC/MM) must stay readable as it is entered.
-  // The room comes from the RST pair, which never needs more than five
-  // characters.
+  // It was widened by taking room from the RST pair — until a signal report of
+  // "59+30" turned up, which is five characters plus its padding and no longer
+  // fitted. The RST fields are back to their original width; the callsign keeps
+  // the rest of the row.
   const callsignBlock = (
     <div className="flex flex-col w-56" data-esm="call">
       <Label className="flex items-center gap-2 h-3.5" style={{ marginBottom: 6 }}>
@@ -3869,12 +3901,12 @@ export default function App() {
     </div>
   );
   const rstTxBlock = (
-    <div className="flex flex-col w-16" data-esm="rsttx"><Label className="mb-1 h-3.5">{t('field.rstTx')}</Label>
+    <div className="flex flex-col w-20" data-esm="rsttx"><Label className="mb-1 h-3.5">{t('field.rstTx')}</Label>
       <Combobox value={rstSent} options={rstOptions(mode, rstLists)} commitOnType onChange={(v) => { setRstSent(v); rstUserEditedRef.current = true; }} />
     </div>
   );
   const rstRxBlock = (
-    <div className="flex flex-col w-16" data-esm="rstrx"><Label className="mb-1 h-3.5">{t('field.rstRx')}</Label>
+    <div className="flex flex-col w-20" data-esm="rstrx"><Label className="mb-1 h-3.5">{t('field.rstRx')}</Label>
       <Combobox value={rstRcvd} options={rstOptions(mode, rstLists)} commitOnType onChange={(v) => { setRstRcvd(v); rstUserEditedRef.current = true; }} />
     </div>
   );
@@ -5311,6 +5343,11 @@ export default function App() {
             prefix={prefix}
             operatorGrid={station.my_grid}
             remoteGrid={grid}
+            qth={qth}
+            name={name}
+            country={country}
+            comment={comment}
+            note={note}
             details={details}
             onChange={updateDetails}
             wb={wb}
@@ -6011,8 +6048,23 @@ export default function App() {
               {/* Two configurable panes (per-profile, Settings → Main view).
                   Each side shows one of: great-circle map, locator map, cluster
                   or worked-before. */}
-              <div className="grid grid-cols-2 grid-rows-1 gap-2 h-full min-h-0 p-2">
+              {/* The divider is draggable: a map and a cluster list want very
+                  different widths, and which one deserves the room changes with
+                  what the operator is doing. The share is persisted (portable),
+                  and a double-click puts it back to even. */}
+              <div ref={mainSplitRef} className="grid grid-rows-1 gap-2 h-full min-h-0 p-2"
+                style={{ gridTemplateColumns: `${mainSplit}fr 6px ${100 - mainSplit}fr` }}>
                 <div className="min-h-0 min-w-0 flex">{renderMainPane(mainPaneLeft)}</div>
+                <div
+                  role="separator"
+                  aria-orientation="vertical"
+                  title={t('main.splitTip')}
+                  onPointerDown={startMainSplitDrag}
+                  onDoubleClick={() => setMainSplit(50)}
+                  className="group relative cursor-col-resize flex items-center justify-center -mx-1 px-1"
+                >
+                  <span className="h-10 w-1 rounded-full bg-border group-hover:bg-primary transition-colors" />
+                </div>
                 <div className="min-h-0 min-w-0 flex">{renderMainPane(mainPaneRight)}</div>
               </div>
             </TabsContent>

frontend/src/components/AwardEditor.tsx

@@ -33,7 +33,7 @@ export type AwardDef = {
   code: string; name: string; description?: string; valid?: boolean; protected?: boolean;
   url?: string; download_url?: string; ref_url?: string; valid_from?: string; valid_to?: string; alias?: string;
   ref_display?: string; // grid column shows: ref | name | both
-  type?: string; field: string; match_by?: string; exact_match?: boolean; pattern: string;
+  type?: string; field: string; match_by?: string; exact_match?: boolean; one_ref_per_qso?: boolean; pattern: string;
   leading_str?: string; trailing_str?: string; dynamic?: boolean;
   or_rules?: AwardOrRule[];
   dxcc_filter: number[] | null; valid_bands?: string[]; valid_modes?: string[]; emission?: string[];
@@ -227,7 +227,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
   };
   type Explanation = {
     code: string; in_scope: boolean; scope_error?: string; predefined: boolean;
-    ref_count: number; steps: Step[]; manual?: string[]; result: string[];
+    ref_count: number; steps: Step[]; manual?: string[]; ambiguous?: string[]; result: string[];
   };
   type TestRow = { qso: any; explanation: Explanation };
   const [testCall, setTestCall] = useState('');
@@ -554,6 +554,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                         </div>
                       </Field2>
                       <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]"><Checkbox checked={!!cur.exact_match} onCheckedChange={(c) => patch({ exact_match: !!c })} /> {t('awed.exactMatch')}</label>
+                      <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]" title={t('awed.oneRefHint')}><Checkbox checked={!!cur.one_ref_per_qso} onCheckedChange={(c) => patch({ one_ref_per_qso: !!c })} /> {t('awed.oneRef')}</label>
                       <Field2 label={t('awed.patternRegex')}><Input className="h-8 font-mono text-xs" value={cur.pattern} onChange={(e) => patch({ pattern: e.target.value })} placeholder={t('awed.patternPlaceholder')} /></Field2>
                       <div className="grid grid-cols-2 gap-3">
                         <Field2 label={t('awed.leadingString')}><Input className="h-8 font-mono text-xs" value={cur.leading_str ?? ''} onChange={(e) => patch({ leading_str: e.target.value })} /></Field2>
@@ -708,6 +709,13 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                                   )}
                                 </div>
                               ))}
+                              {(ex.ambiguous ?? []).length > 0 && (
+                                <div className="px-3 py-2 text-xs">
+                                  <span className="font-semibold uppercase text-[10px] tracking-wide text-warning">{t('awed.testAmbiguous')}</span>{' '}
+                                  <span className="font-mono text-warning">{(ex.ambiguous ?? []).join(', ')}</span>{' '}
+                                  <span className="text-muted-foreground">{t('awed.testAmbiguousHint')}</span>
+                                </div>
+                              )}
                               {(ex.manual ?? []).length > 0 && (
                                 <div className="px-3 py-2 text-xs">
                                   <span className="font-semibold uppercase text-[10px] tracking-wide">{t('awed.testManual')}</span>{' '}

frontend/src/components/DetailsPanel.tsx

@@ -1,5 +1,5 @@
 import { useEffect, useMemo, useState } from 'react';
-import { ComputeQSOAwardRefs } from '../../wailsjs/go/main/App';
+import { ComputeQSOAwardRefs, IsNewUSCounty } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { Label } from '@/components/ui/label';
 import { Checkbox } from '@/components/ui/checkbox';
@@ -53,6 +53,14 @@ interface Props {
   prefix: string;
   operatorGrid: string;   // station.my_grid — origin for bearing/distance
   remoteGrid: string;     // entry-strip Grid value — destination
+  // Entry-strip text fields. Live award detection matches on these too — a DARC
+  // DOK keys off QTH, not the address — and sending only the address meant such
+  // an award stayed silent until the QSO was logged.
+  qth?: string;
+  name?: string;
+  country?: string;
+  comment?: string;
+  note?: string;
   details: DetailsState;
   onChange: (patch: Partial<DetailsState>) => void;
   // Stats (F1) tab content: the worked-before matrix + optional QRZ image.
@@ -113,28 +121,57 @@ function numOrUndef(v: string): number | undefined {
   return isNaN(n) ? undefined : n;
 }
 
+// Column spans written out rather than built as `col-span-${n}`: Tailwind scans
+// for literal class names, so an interpolated one is never emitted.
+const SPAN_CLASS: Record<number, string> = {
+  1: '', 2: 'col-span-2', 3: 'col-span-3', 4: 'col-span-4', 5: 'col-span-5',
+  6: 'col-span-6', 7: 'col-span-7', 8: 'col-span-8', 9: 'col-span-9',
+  10: 'col-span-10', 11: 'col-span-11', 12: 'col-span-12',
+};
+
 // Compact field helper to keep the JSX dense.
-function Field({ label, span = 1, children }: { label: string; span?: 1 | 2 | 3 | 4 | 6; children: React.ReactNode }) {
+function Field({ label, span = 1, className, children }: { label: string; span?: number; className?: string; children: React.ReactNode }) {
   return (
-    <div className={cn('flex flex-col min-w-0', span === 2 && 'col-span-2', span === 3 && 'col-span-3', span === 4 && 'col-span-4', span === 6 && 'col-span-6')}>
+    <div className={cn('flex flex-col min-w-0', SPAN_CLASS[span], className)}>
       <Label className="mb-1">{label}</Label>
       {children}
     </div>
   );
 }
 
-export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
+export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
   const { t } = useI18n();
   const [internalOpen, setInternalOpen] = useState<TabName>('stats');
   const open = tab ?? internalOpen; // controlled when `tab` is provided
 
   // Live award detection: run the SAME engine used at log time over the current
-  // contact (callsign + looked-up address/state/zones) so award references the
-  // QSO will earn — e.g. WAPC matching "Beijing" inside the address — are
-  // surfaced and auto-added the moment you enter a call or click a spot, instead
-  // of only appearing after logging. Pickable matches are merged into award_refs
+  // contact — callsign, the looked-up address/state/zones AND the entry-strip
+  // text (QTH, name, country, comment, note, grid). Sending only the address was
+  // a silent hole: a DARC DOK matches on QTH, so "Aachen" produced nothing here
+  // while the award editor's Test tab, which passes the whole QSO, matched it.
+  // References the QSO will earn — WAPC matching "Beijing" inside the address,
+  // a DOK matching the town — are surfaced and auto-added the moment you enter a
+  // call or click a spot, instead of only appearing after logging. Pickable
+  // matches are merged into award_refs
   // (idempotent; award_refs is NOT a dependency, so removing one by hand sticks).
-  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean }>>([]);
+  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean; ambiguous?: boolean }>>([]);
+
+  // NEW badge on the county: the same question the cluster's NEW CTY badge
+  // answers, for the station being worked right now. Debounced because the
+  // county field is typed into as well as filled by the lookup.
+  const [newCounty, setNewCounty] = useState(false);
+  useEffect(() => {
+    const cnty = (details.cnty ?? '').trim();
+    if (!cnty) { setNewCounty(false); return; }
+    let alive = true;
+    const id = window.setTimeout(async () => {
+      try {
+        const isNew = await IsNewUSCounty(details.state ?? '', cnty);
+        if (alive) setNewCounty(!!isNew);
+      } catch { if (alive) setNewCounty(false); }
+    }, 300);
+    return () => { alive = false; window.clearTimeout(id); };
+  }, [details.state, details.cnty]);
   useEffect(() => {
     if (open !== 'awards' || !callsign.trim()) { setDetected([]); return; }
     const t = window.setTimeout(async () => {
@@ -142,6 +179,8 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const q: any = {
           callsign, band, mode,
           address: details.address ?? '', state: details.state ?? '', cnty: details.cnty ?? '',
+          qth: qth ?? '', name: name ?? '', country: country ?? '',
+          comment: comment ?? '', notes: note ?? '', grid: remoteGrid ?? '',
           cont: details.cont ?? '', dxcc: details.dxcc, cqz: details.cqz, ituz: details.ituz,
           qso_date: new Date().toISOString(),
         };
@@ -151,7 +190,9 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const have = new Set(cur.split(';').filter(Boolean));
         let next = cur;
         for (const r of all) {
-          if (!r.pickable) continue;
+          // An ambiguous candidate is offered, never auto-added: adding one would
+          // be the guess the award's "one reference per QSO" setting exists to refuse.
+          if (!r.pickable || r.ambiguous) continue;
           const entry = `${String(r.code).toUpperCase()}@${String(r.ref).toUpperCase()}`;
           if (!have.has(entry)) { next = next ? `${next};${entry}` : entry; have.add(entry); }
         }
@@ -160,7 +201,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
     }, 400);
     return () => window.clearTimeout(t);
     // eslint-disable-next-line react-hooks/exhaustive-deps
-  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, band, mode]);
+  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, qth, name, country, comment, note, remoteGrid, band, mode]);
   // Bearing/distance from operator's home grid to the remote station.
   // Recomputed only when either grid actually changes.
   const path = useMemo(() => {
@@ -227,14 +268,26 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
       )}
 
       {open === 'info' && (
-        <div className="grid grid-cols-6 gap-2 px-3 py-2.5">
-          <Field label={t('detp.statePref')}>
+        <div className="grid grid-cols-12 gap-2 px-3 py-2.5">
+          {/* Twelve columns, not six: the fields hold very different things. A US
+              county name is long, a CQ zone is two digits — on an even six-column
+              grid they were the same width, so the county truncated while the
+              zones sat mostly empty. */}
+          <Field label={t('detp.statePref')} span={2}>
             <Input value={details.state} onChange={(e) => onChange({ state: e.target.value })} />
           </Field>
-          <Field label={t('detp.county')}>
-            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} />
+          <Field label={t('detp.county')} span={4} className="relative">
+            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} className={cn(newCounty && 'pr-14')} />
+            {newCounty && (
+              <span
+                title={t('detp.newCountyTip')}
+                className="absolute right-1.5 bottom-1.5 rounded px-1.5 py-0.5 text-[10px] font-bold tracking-wide bg-success text-success-foreground pointer-events-none"
+              >
+                {t('detp.newCounty')}
+              </span>
+            )}
           </Field>
-          <Field label={t('detp.prefix')}>
+          <Field label={t('detp.prefix')} span={2}>
             <Input className="font-mono uppercase" value={prefix} readOnly tabIndex={-1} />
           </Field>
           <Field label={t('detp.cqZone')}>
@@ -248,7 +301,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
           {/* DXCC # closes the top row (next to the zones); Continent and
               Azimuth SP live in the main entry strip / bandeau. The long-path
               bearing and distances move to the row below. */}
-          <Field label={t('detp.dxcc')}>
+          <Field label={t('detp.dxcc')} span={2}>
             <Input
               readOnly
               tabIndex={-1}
@@ -257,40 +310,45 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
               placeholder="—"
             />
           </Field>
-          <Field label={t('detp.azimuthLp')}>
-            <Input
-              readOnly
-              tabIndex={-1}
-              className="font-mono bg-muted/40 cursor-default"
-              value={path ? fmtDeg(path.bearingLong) : ''}
-              placeholder="—"
-            />
-          </Field>
-          <Field label={t('detp.distanceSp')}>
-            <Input
-              readOnly
-              tabIndex={-1}
-              className="font-mono bg-muted/40 cursor-default"
-              value={path ? fmtKm(path.distanceShort) : ''}
-              placeholder="—"
-            />
-          </Field>
-          <Field label={t('detp.distanceLp')}>
-            <Input
-              readOnly
-              tabIndex={-1}
-              className="font-mono bg-muted/40 cursor-default"
-              value={path ? fmtKm(path.distanceLong) : ''}
-              placeholder="—"
-            />
-          </Field>
-          <Field label={t('detp.address')} span={3}>
-            <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
-          </Field>
-          <Field label={t('detp.qslMessage')} span={3}>
+          {/* The bearing and the two distances are read-only and hold at most
+              "12345 km", so they take a fixed width and the address — the one
+              field here that is never wide enough — gets everything left over. */}
+          <div className="col-span-12 flex gap-2">
+            <Field label={t('detp.azimuthLp')} className="w-20 shrink-0">
+              <Input
+                readOnly
+                tabIndex={-1}
+                className="font-mono bg-muted/40 cursor-default"
+                value={path ? fmtDeg(path.bearingLong) : ''}
+                placeholder="—"
+              />
+            </Field>
+            <Field label={t('detp.distanceSp')} className="w-24 shrink-0">
+              <Input
+                readOnly
+                tabIndex={-1}
+                className="font-mono bg-muted/40 cursor-default"
+                value={path ? fmtKm(path.distanceShort) : ''}
+                placeholder="—"
+              />
+            </Field>
+            <Field label={t('detp.distanceLp')} className="w-24 shrink-0">
+              <Input
+                readOnly
+                tabIndex={-1}
+                className="font-mono bg-muted/40 cursor-default"
+                value={path ? fmtKm(path.distanceLong) : ''}
+                placeholder="—"
+              />
+            </Field>
+            <Field label={t('detp.address')} className="flex-1 min-w-0">
+              <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
+            </Field>
+          </div>
+          <Field label={t('detp.qslMessage')} span={7}>
             <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
           </Field>
-          <Field label={t('detp.qslVia')} span={2}>
+          <Field label={t('detp.qslVia')} span={5}>
             <Input value={details.qsl_via} onChange={(e) => onChange({ qsl_via: e.target.value })} />
           </Field>
         </div>
@@ -305,10 +363,37 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
             fieldValues={{ state: details.state ?? '', cnty: details.cnty ?? '' }}
             heightClass="flex-1 min-h-0"
           />
-          {detected.length > 0 && (
+          {/* Ambiguous candidates: the award allows one reference per QSO and
+              several matched, so none was kept. Click one to settle it while the
+              contact is still in front of you. */}
+          {detected.some((r) => r.ambiguous) && (
+            <div className="mt-2 text-[11px] shrink-0 leading-snug border-t border-warning/40 pt-1.5">
+              <span className="font-medium text-warning">{t('detp.ambiguous')}</span>{' '}
+              {detected.filter((r) => r.ambiguous).map((r) => (
+                <button
+                  key={`amb-${r.code}@${r.ref}`}
+                  type="button"
+                  title={r.name ?? ''}
+                  onClick={() => {
+                    const entry = `${r.code.toUpperCase()}@${r.ref.toUpperCase()}`;
+                    const cur = details.award_refs ?? '';
+                    // Only one of the candidates can be right — replace any
+                    // sibling already picked for this award rather than stacking.
+                    const kept = cur.split(';').filter((e) => e && e.split('@')[0].toUpperCase() !== r.code.toUpperCase());
+                    onChange({ award_refs: [...kept, entry].join(';') });
+                    setDetected((d) => d.filter((x) => !x.ambiguous || x.code.toUpperCase() !== r.code.toUpperCase()));
+                  }}
+                  className="inline-block mr-1.5 px-1.5 py-0.5 rounded font-mono whitespace-nowrap border border-warning/50 text-warning hover:bg-warning/10"
+                >
+                  {r.code}@{r.ref}{r.name ? ` — ${r.name}` : ''}
+                </button>
+              ))}
+            </div>
+          )}
+          {detected.some((r) => !r.ambiguous) && (
             <div className="mt-2 text-[11px] text-muted-foreground shrink-0 max-h-14 overflow-y-auto leading-snug border-t border-border/50 pt-1.5">
               <span className="font-medium text-foreground/70">{t('detp.detected')}</span>{' '}
-              {detected.map((r) => (
+              {detected.filter((r) => !r.ambiguous).map((r) => (
                 <span key={`${r.code}@${r.ref}`} className="inline-block mr-1.5 font-mono whitespace-nowrap" title={r.name ?? ''}>
                   <span className="text-foreground/80">{r.code}{r.ref ? `@${r.ref}` : ''}</span>
                 </span>

frontend/src/components/SettingsModal.tsx

@@ -1136,7 +1136,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   const [modeDraft, setModeDraft] = useState('');
   const [catCfg, setCatCfg] = useState<CATSettings>({
     enabled: false, backend: 'omnirig', omnirig_rig: 1, omnirig_vfo: '', flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120,
-    yaesu_port: '', yaesu_baud: 38400, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70,
+    yaesu_port: '', yaesu_baud: 38400, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '',
     icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0,
     digital_default: 'FT8', share_enabled: false, share_port: 4532,
@@ -2538,6 +2538,19 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                   }} />
                 <span className="text-xs text-muted-foreground">{t('cat.xieguAddrHint')}</span>
               </div>
+              <div className="space-y-1">
+                <Label>{t('cat.xieguPTTLine')}</Label>
+                <Select value={catCfg.xiegu_ptt_line || 'civ'}
+                  onValueChange={(v) => setCatCfg((s) => ({ ...s, xiegu_ptt_line: v === 'civ' ? '' : v }))}>
+                  <SelectTrigger><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    <SelectItem value="civ">{t('cat.xieguPTTCiv')}</SelectItem>
+                    <SelectItem value="rts">RTS</SelectItem>
+                    <SelectItem value="dtr">DTR</SelectItem>
+                  </SelectContent>
+                </Select>
+                <span className="text-xs text-muted-foreground">{t('cat.xieguPTTHint')}</span>
+              </div>
             </>
             )}
             {catCfg.backend === 'yaesu' && (

frontend/src/components/ui/tabs.tsx

@@ -37,7 +37,11 @@ const TabsContent = React.forwardRef<
 >(({ className, ...props }, ref) => (
   <TabsPrimitive.Content
     ref={ref}
-    className={cn('mt-2 ring-offset-background focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring focus-visible:ring-offset-2', className)}
+    // No focus ring on the panel itself. Radix makes the content focusable and
+    // moves focus into it when a tab is selected, so clicking anywhere in the
+    // lower half drew a full-width orange rule under the tab strip. The panel is
+    // a container — what it holds carries its own focus styling.
+    className={cn('mt-2 focus-visible:outline-none', className)}
     {...props}
   />
 ));

frontend/src/lib/i18n.tsx

@@ -51,7 +51,7 @@ const en: Dict = {
   'dup.colDate': 'Date / time (UTC)', 'dup.colFreq': 'Freq', 'dup.colRst': 'RST s/r', 'dup.colName': 'Name',
   'profileScope.saved': 'Saved for profile', 'profileScope.switch': '— switch profiles to edit another identity.',
   // Tabs
-  'tab.main': 'Main', 'tab.recent': 'Recent QSOs', 'tab.cluster': 'Cluster', 'tab.worked': 'Worked before',
+  'tab.main': 'Main', 'main.splitTip': 'Drag to resize the panes — double-click to even them out', 'tab.recent': 'Recent QSOs', 'tab.cluster': 'Cluster', 'tab.worked': 'Worked before',
   'tab.awards': 'Awards', 'tab.bandmap': 'Band Map', 'tab.contest': 'Contest', 'tab.net': 'Net',
   // Entry form
   'field.callsign': 'Callsign', 'field.name': 'Name', 'field.qth': 'QTH', 'field.grid': 'Grid',
@@ -277,7 +277,7 @@ const en: Dict = {
   'extsvc.hint': 'Upload logged QSOs to online logbooks. Each service uploads automatically on a new QSO when enabled; timing is per-service (immediate, or a 1–2 min delay so a mis-logged QSO can still be fixed first).',
   'hw.motorTxInhibit': 'Inhibit transmission while the antenna is moving', 'hw.motorTxInhibitHint': 'Blocks the FlexRadio from transmitting while the elements move (needs FlexRadio in API mode + this antenna enabled). No effect with other radios.', 'hw.motorAntenna': 'Ultrabeam / Steppir', 'hw.motorEnable': 'Enable antenna control', 'hw.motorType': 'Antenna type', 'hw.motorTransport': 'Connection', 'hw.motorTcp': 'Network (TCP)', 'hw.motorSerial': 'Serial (COM)', 'hw.motorCom': 'Serial port', 'hw.motorBaud': 'Baud', 'hw.steppirHint': 'SteppIR controllers are RS-232 serial (the DATA OUT DB9 port). Serial = a USB↔RS-232 (FTDI) adapter, shown as a COM port. Network = a serial-to-Ethernet bridge (as for the Ultrabeam).', 'hw.steppirRange': 'Tunable range', 'hw.steppirRangeHint': "The SteppIR's frequency coverage. On a band outside this range (e.g. 30 m on a 20 m–6 m SteppIR) OpsLog won't try to tune the antenna and won't inhibit transmission. Default 13–54 MHz (20 m–6 m); widen the low edge (e.g. 6) for a 40 m-equipped SteppIR.", 'hw.ultrabeam': 'Antenna (Ultrabeam)', 'hw.audioVoice': 'Audio devices & voice keyer',
   // CAT panel body
-  'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'A native CAT backend owns the radio serial port, so no other program can reach it. This lets WSJT-X, JTDX, MSHV or Log4OM talk to the rig THROUGH OpsLog: in the other program pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532. Works with every backend, not only the native ones.', 'cat.sharePort': 'Sharing port', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.kenwoodHostHint': 'A serial-over-network bridge \u2014 ser2net, an Ethernet-serial adapter, a Raspberry Pi at the radio. Filled in, it is used INSTEAD of the COM port above. This is not the radio\u2019s own RJ45 socket, which speaks Kenwood\u2019s KNS protocol and is not supported.', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved',
+  'cat.enable': 'Enable CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Share CAT with other programs', 'cat.shareHint': 'A native CAT backend owns the radio serial port, so no other program can reach it. This lets WSJT-X, JTDX, MSHV or Log4OM talk to the rig THROUGH OpsLog: in the other program pick the rig model "Hamlib NET rigctl" and enter 127.0.0.1:4532. Works with every backend, not only the native ones.', 'cat.sharePort': 'Sharing port', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Xiegu CAT port', 'cat.xieguBaudHint': 'Must match the radio menu (G90 default: 19200).', 'cat.xieguAddrHint': 'Factory CI-V address of the G90/X6100 family: 0x70.', 'cat.xieguPTTLine': 'How the rig is keyed', 'cat.xieguPTTCiv': 'CI-V command', 'cat.xieguPTTHint': 'A G90 does not transmit on the CI-V command: interfaces like the DE-19 key it on RTS or DTR. Pick the line yours uses \u2014 it is also what lets WSJT-X transmit through the shared CAT link.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, network)', 'cat.civTrace': 'Log the CAT protocol', 'cat.civTraceHint': 'Writes every CAT frame to and from the radio into the log \u2014 CI-V as hex, Kenwood as the text it exchanges. For reporting a rig that answers oddly \u2014 a button that does the wrong thing, a frequency that jumps. Session only: it is a diagnostic, and it makes the log large.', 'cat.kenwoodPort': 'Kenwood COM port', 'cat.kenwoodPortHint': 'The rig\u2019s CAT/USB serial port (TS-590, TS-890, TS-990, TS-2000, and Elecraft K3/K4 which speak the same dialect).', 'cat.kenwoodBaudHint': 'Must match MENU on the radio: a TS-590 leaves the factory at 9600, a TS-890 at 115200.', 'cat.kenwoodHost': 'Or over the network (host:port)', 'cat.kenwoodHostHint': 'A serial-over-network bridge \u2014 ser2net, an Ethernet-serial adapter, a Raspberry Pi at the radio. Filled in, it is used INSTEAD of the COM port above. This is not the radio\u2019s own RJ45 socket, which speaks Kenwood\u2019s KNS protocol and is not supported.', 'cat.yaesuPort': 'Yaesu CAT port', 'cat.yaesuPortHint': 'The rig CAT port — on an FTDX10/FTDX101 over USB this is the ENHANCED COM port, not the standard one.', 'cat.yaesuBaudHint': 'Must match the radio menu (FTDX10/FTDX101 default: 38400).', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V network)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 power per band and mode', 'flxpw.hint': 'TX power applied when the band or mode changes. Leave a box empty to leave the power alone.', 'flxpw.band': 'Band', 'flxb.title': 'FlexRadio \u2014 per-band antennas and power', 'flxb.hint': 'Antennas are applied when the band changes; power when the band or the mode changes. Leave a power box empty to leave it alone.', 'flxb.rxAnt': 'RX antenna', 'flxb.txAnt': 'TX antenna', 'flxb.noRadio': 'No antennas reported yet \u2014 connect the FlexRadio, then reopen this panel.', 'flxpw.phone': 'Phone', 'flxpw.digi': 'Digital', 'flxpw.noBands': 'No bands configured \u2014 add them in Lists \u2192 Bands.', 'flxpw.saved': 'Saved',
   'cat.icomNetHost': 'Rig IP / hostname', 'cat.icomNetUser': 'Network user (ID)', 'cat.icomNetPass': 'Network password',
   'cat.icomNetHint': "Connects to the rig's built-in LAN server directly — no RS-BA1 or Remote Utility needed (close them first). Use the Network User1 ID/Password set in the rig's Network menu. A rig in standby is powered on automatically.",
   'cat.icomNetAudio': 'Stream RX audio over the network (experimental)',
@@ -366,14 +366,14 @@ const en: Dict = {
   'ncp.newNetPrompt': 'New NET name:', 'ncp.renamePrompt': 'Rename NET:', 'ncp.deleteConfirm': 'Delete NET "{name}" and its roster? This cannot be undone.', 'ncp.closeConfirm': "{n} station(s) still on the air will be dropped WITHOUT logging. Close anyway?", 'ncp.removeConfirm': "Remove {n} station(s) from this NET's roster?", 'ncp.colCallsign': 'Callsign', 'ncp.colName': 'Name', 'ncp.colTimeOn': 'Time on', 'ncp.colBand': 'Band', 'ncp.colMode': 'Mode', 'ncp.colComment': 'Comment', 'ncp.colCountry': 'Country', 'ncp.colDate': 'Date', 'ncp.workedBefore': 'Worked before', 'ncp.wbHint': 'Click a station (on air or roster) to see prior QSOs', 'ncp.wbNone': 'No prior QSO with', 'ncp.wbFirst': 'first', 'ncp.wbLast': 'last', 'ncp.wbResize': 'Drag to resize', 'ncp.newNet': 'New NET', 'ncp.closeToSwitch': 'Close the NET to switch', 'ncp.selectNetTitle': 'Select a NET', 'ncp.selectNetOption': '— select a NET —', 'ncp.closeNet': 'Close NET', 'ncp.openNet': 'Open NET', 'ncp.rename': 'Rename', 'ncp.delete': 'Delete', 'ncp.netOpenBadge': 'NET OPEN', 'ncp.onAir': 'On air:', 'ncp.roster': 'Roster:', 'ncp.onAirActive': 'On air — active QSOs', 'ncp.activeHint': 'mic-pass order · ⬆⬇ to reorder · double-click → edit · "Log & end" to save', 'ncp.moveUp': 'Move up the mic-pass order', 'ncp.moveDown': 'Move down the mic-pass order', 'ncp.logEndSelected': 'Log & end selected', 'ncp.logAll': 'Log everyone ({n})', 'ncp.logAllConfirm': 'Log all {n} on-air station(s) to the logbook?', 'ncp.netUsersRoster': 'NET users — roster', 'ncp.rosterHint': 'double-click → put on air', 'ncp.addContact': 'Add contact', 'ncp.remove': 'Remove', 'ncp.putOnAir': 'Put selected on air', 'ncp.addContactTitle': 'Add contact to NET', 'ncp.addContactDesc': "Saved in this NET's roster (reused next time you open it).", 'ncp.callsign': 'Callsign', 'ncp.search': 'Search', 'ncp.name': 'Name', 'ncp.country': 'Country', 'ncp.cancel': 'Cancel', 'ncp.saveInNet': 'Save in NET',
   'udpp.svcWsjtLabel': 'WSJT-X / JTDX / MSHV', 'udpp.svcWsjtHint': 'Auto-logs FT8/FT4/etc. QSOs and fills the entry callsign live.', 'udpp.svcAdifLabel': 'ADIF message (JTAlert, GridTracker)', 'udpp.svcAdifHint': 'Receives a single ADIF record per packet and logs it.', 'udpp.svcN1mmLabel': 'N1MM Logger+ (contest XML)', 'udpp.svcN1mmHint': 'Receives contest QSOs as XML messages.', 'udpp.svcRemoteLabel': 'Remote callsign (DXHunter, custom)', 'udpp.svcRemoteHint': 'A short text packet containing just a callsign — fills the entry field.', 'udpp.svcDbLabel': 'ADIF Message', 'udpp.svcDbHint': 'Sends the ADIF of every QSO you log to a remote listener (Cloudlog UDP, N1MM, …).', 'udpp.svcPstLabel': 'PstRotator frequency', 'udpp.svcPstHint': 'Sends the rig frequency as <PST><FREQUENCY> whenever it changes — set PstRotatorAz tracker to DXLog.net (default port 12040).', 'udpp.svcN1mmRadioLabel': 'N1MM RadioInfo (freq + mode)', 'udpp.svcN1mmRadioHint': 'Broadcasts the rig frequency/mode as N1MM Logger+ RadioInfo XML on every change — consumed by PstRotator (N1MM tracker) and many other tools.', 'udpp.deleteConfirm': 'Delete this UDP connection?', 'udpp.loading': 'Loading…', 'udpp.intro': 'UDP connections let OpsLog talk to other ham radio software. Inbound connections receive QSOs or callsigns and update the logbook live; outbound connections notify other apps when you log a QSO locally. Enable multicast to share a port with another listener without conflict — required for the typical WSJT-X 2237 setup.', 'udpp.inboundTitle': 'Inbound — OpsLog listens', 'udpp.outboundTitle': 'Outbound — OpsLog sends', 'udpp.reloadAll': 'Reload all', 'udpp.reloadHint': 'Restarts every enabled listener after a manual change.', 'udpp.add': 'Add', 'udpp.noConnection': 'No connection.', 'udpp.unnamed': '(unnamed)', 'udpp.dialogTitle': '{action} {direction} connection', 'udpp.new': 'New', 'udpp.edit': 'Edit', 'udpp.directionInbound': 'inbound', 'udpp.directionOutbound': 'outbound', 'udpp.name': 'Name', 'udpp.namePhInbound': 'WSJT-X log', 'udpp.namePhOutbound': 'Cloudlog notify', 'udpp.serviceType': 'Service type', 'udpp.port': 'Port', 'udpp.multicast': 'Multicast', 'udpp.multicastGroup': 'Multicast group', 'udpp.multicastHint': 'Use the same group address as the sending app. WSJT-X default is 224.0.0.1.', 'udpp.destinationIp': 'Destination IP', 'udpp.enabled': 'Enabled', 'udpp.cancel': 'Cancel', 'udpp.save': 'Save',
   'fltb.fCallsign': 'Callsign', 'fltb.fDate': 'Date / time (UTC)', 'fltb.fEndDate': 'End date / time', 'fltb.fBand': 'Band', 'fltb.fRxBand': 'RX band', 'fltb.fMode': 'Mode', 'fltb.fSubmode': 'Submode', 'fltb.fFreq': 'Frequency (Hz)', 'fltb.fRxFreq': 'RX frequency (Hz)', 'fltb.fRstSent': 'RST sent', 'fltb.fRstRcvd': 'RST rcvd', 'fltb.fName': 'Name', 'fltb.fQth': 'QTH', 'fltb.fAddress': 'Address', 'fltb.fEmail': 'E-mail', 'fltb.fGrid': 'Grid', 'fltb.fCountry': 'Country', 'fltb.fState': 'State', 'fltb.fCounty': 'County', 'fltb.fDxcc': 'DXCC #', 'fltb.fContinent': 'Continent', 'fltb.fCqz': 'CQ zone', 'fltb.fItuz': 'ITU zone', 'fltb.fIota': 'IOTA', 'fltb.fSota': 'SOTA ref', 'fltb.fPota': 'POTA ref', 'fltb.fWwff': 'WWFF ref', 'fltb.fRig': 'Rig', 'fltb.fAntenna': 'Antenna', 'fltb.fQslSent': 'Paper QSL sent status', 'fltb.fQslSentDate': 'Paper QSL sent date', 'fltb.fQslRcvd': 'Paper QSL received status', 'fltb.fQslRcvdDate': 'Paper QSL received date', 'fltb.fQslVia': 'QSL via', 'fltb.fLotwSent': 'LoTW sent status', 'fltb.fLotwSentDate': 'LoTW sent date', 'fltb.fLotwRcvd': 'LoTW received status', 'fltb.fLotwRcvdDate': 'LoTW received date', 'fltb.fEqslSent': 'eQSL sent status', 'fltb.fEqslSentDate': 'eQSL sent date', 'fltb.fEqslRcvd': 'eQSL received status', 'fltb.fEqslRcvdDate': 'eQSL received date', 'fltb.fQrzSent': 'QRZ.com sent status', 'fltb.fQrzSentDate': 'QRZ.com sent date', 'fltb.fQrzRcvd': 'QRZ.com received status', 'fltb.fQrzRcvdDate': 'QRZ.com received date', 'fltb.fClublogSent': 'Club Log sent status', 'fltb.fClublogSentDate': 'Club Log sent date', 'fltb.fHrdlogSent': 'HRDLog sent status', 'fltb.fHrdlogSentDate': 'HRDLog sent date', 'fltb.fContestId': 'Contest ID', 'fltb.fSerialRcvd': 'Serial rcvd', 'fltb.fSerialSent': 'Serial sent', 'fltb.fPropMode': 'Propagation mode', 'fltb.fSatellite': 'Satellite', 'fltb.fMyCallsign': 'Station callsign (my call)', 'fltb.fOperator': 'Operator', 'fltb.fOwnerCallsign': 'Owner callsign', 'fltb.fMyGrid': 'My grid', 'fltb.fMyCountry': 'My country', 'fltb.fMyState': 'My state', 'fltb.fMyCounty': 'My county', 'fltb.fMyIota': 'My IOTA', 'fltb.fMySota': 'My SOTA ref', 'fltb.fMyPota': 'My POTA ref', 'fltb.fMyWwff': 'My WWFF ref', 'fltb.fMyStreet': 'My street', 'fltb.fMyCity': 'My city', 'fltb.fMyPostal': 'My postal code', 'fltb.fMyRig': 'My rig', 'fltb.fMyAntenna': 'My antenna', 'fltb.fTxPower': 'TX power (W)', 'fltb.fComment': 'Comment', 'fltb.fNotes': 'Notes', 'fltb.opEq': 'equals (=)', 'fltb.opNe': 'not equal (≠)', 'fltb.opContains': 'contains', 'fltb.opStartsWith': 'starts with', 'fltb.opEndsWith': 'ends with', 'fltb.opGt': 'greater than (>)', 'fltb.opLt': 'less than (<)', 'fltb.opGe': 'greater or equal (≥)', 'fltb.opLe': 'less or equal (≤)', 'fltb.opEmpty': 'is empty', 'fltb.opNotEmpty': 'is not empty', 'fltb.title': 'QSO filter', 'fltb.match': 'Match', 'fltb.all': 'ALL (AND)', 'fltb.any': 'ANY (OR)', 'fltb.loadPreset': 'Load preset…', 'fltb.noConditions': 'No conditions — the list shows all QSOs. Add one below.', 'fltb.where': 'WHERE', 'fltb.valuePh': 'value', 'fltb.remove': 'Remove', 'fltb.addCondition': 'Add condition', 'fltb.presetNamePh': 'Preset name…', 'fltb.savePreset': 'Save preset', 'fltb.clear': 'Clear', 'fltb.cancel': 'Cancel', 'fltb.applyClose': 'Apply & close',
-  'detp.propAS': 'Aircraft Scatter', 'detp.propAUR': 'Aurora', 'detp.propAUE': 'Aurora-E', 'detp.propBS': 'Back Scatter', 'detp.propEME': 'Earth-Moon-Earth', 'detp.propES': 'Sporadic E', 'detp.propFAI': 'Field Aligned Irregularities', 'detp.propF2': 'F2 Reflection', 'detp.propGWAVE': 'Ground Wave', 'detp.propINTERNET': 'Internet-assisted', 'detp.propION': 'Ionoscatter', 'detp.propLOS': 'Line of Sight', 'detp.propMS': 'Meteor Scatter', 'detp.propRPT': 'Terrestrial / atmospheric repeater', 'detp.propRS': 'Rain Scatter', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-Equatorial', 'detp.propTR': 'Tropospheric Ducting', 'detp.pathShort': 'Short Path', 'detp.pathLong': 'Long Path', 'detp.pathGrayline': 'Grayline', 'detp.pathOther': 'Other', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Awards', 'detp.tabMy': 'My', 'detp.tabExtended': 'Extended', 'detp.statePref': 'State / pref', 'detp.county': 'County', 'detp.prefix': 'Prefix', 'detp.cqZone': 'CQ zone', 'detp.ituZone': 'ITU zone', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimuth LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Address', 'detp.qslMessage': 'QSL message', 'detp.qslVia': 'QSL via', 'detp.detected': 'Detected — this contact will count for:', 'detp.azimuth': 'Azimuth (°)', 'detp.elevation': 'Elevation (°)', 'detp.txPower': 'TX power (W)', 'detp.satelliteMode': 'Satellite mode', 'detp.antPath': 'Ant. path', 'detp.propagation': 'Propagation', 'detp.rig': 'Rig', 'detp.antenna': 'Antenna', 'detp.satName': 'Satellite name', 'detp.contestId': 'Contest ID', 'detp.rcvdExchangePh': 'rcvd exchange', 'detp.sentExchangePh': 'sent exchange', 'detp.contactedEmail': 'Contacted email',
+  'detp.propAS': 'Aircraft Scatter', 'detp.propAUR': 'Aurora', 'detp.propAUE': 'Aurora-E', 'detp.propBS': 'Back Scatter', 'detp.propEME': 'Earth-Moon-Earth', 'detp.propES': 'Sporadic E', 'detp.propFAI': 'Field Aligned Irregularities', 'detp.propF2': 'F2 Reflection', 'detp.propGWAVE': 'Ground Wave', 'detp.propINTERNET': 'Internet-assisted', 'detp.propION': 'Ionoscatter', 'detp.propLOS': 'Line of Sight', 'detp.propMS': 'Meteor Scatter', 'detp.propRPT': 'Terrestrial / atmospheric repeater', 'detp.propRS': 'Rain Scatter', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-Equatorial', 'detp.propTR': 'Tropospheric Ducting', 'detp.pathShort': 'Short Path', 'detp.pathLong': 'Long Path', 'detp.pathGrayline': 'Grayline', 'detp.pathOther': 'Other', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Awards', 'detp.tabMy': 'My', 'detp.tabExtended': 'Extended', 'detp.statePref': 'State / pref', 'detp.county': 'County', 'detp.newCounty': 'NEW', 'detp.newCountyTip': 'County never worked before', 'detp.prefix': 'Prefix', 'detp.cqZone': 'CQ', 'detp.ituZone': 'ITU', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimuth LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Address', 'detp.qslMessage': 'QSL message', 'detp.qslVia': 'QSL via', 'detp.detected': 'Detected — this contact will count for:', 'detp.ambiguous': 'Ambiguous — pick one:', 'detp.azimuth': 'Azimuth (°)', 'detp.elevation': 'Elevation (°)', 'detp.txPower': 'TX power (W)', 'detp.satelliteMode': 'Satellite mode', 'detp.antPath': 'Ant. path', 'detp.propagation': 'Propagation', 'detp.rig': 'Rig', 'detp.antenna': 'Antenna', 'detp.satName': 'Satellite name', 'detp.contestId': 'Contest ID', 'detp.rcvdExchangePh': 'rcvd exchange', 'detp.sentExchangePh': 'sent exchange', 'detp.contactedEmail': 'Contacted email',
   // Awards (ref picker / ref selector / awards panel / award editor)
   'awrp.remove': 'Remove', 'awrp.searchLabel': 'Search {label}…', 'awrp.searching': 'Searching…', 'awrp.noMatch': 'No match.', 'awrp.noMatchDxcc': 'No match for this DXCC.',
   'awrs.group': 'Group', 'awrs.sub': 'Sub', 'awrs.pickReference': '← pick a reference', 'awrs.add': 'Add', 'awrs.enterCallsignFirst': 'Enter a callsign first', 'awrs.noRefsAdded': 'No references added yet', 'awrs.references': 'References', 'awrs.autoMatchTitle': 'The {field} field is {code} — this award counts it automatically', 'awrs.fromField': 'from {field}', 'awrs.autoClickToAdd': 'auto — click to add', 'awrs.search': 'Search…', 'awrs.addUnlistedTitle': "Add this reference even though it isn't in the list yet (new / unlisted)", 'awrs.addPrefix': '+ Add', 'awrs.unlisted': '(unlisted)', 'awrs.searching': 'Searching…', 'awrs.typeToSearch': 'Type 2+ chars to search', 'awrs.enterCallsignOrSearch': 'Enter a callsign, or type to search.', 'awrs.noRefsForEntity': 'No references for this entity.', 'awrs.noResults': 'No results.', 'awrs.downloadLists': 'Download reference lists in the Awards panel → Import data.',
   'awp.awards': 'Awards', 'awp.editAwards': 'Edit awards', 'awp.rescanTitle': 'Re-pull the logbook and recompute (picks up new LoTW/QRZ confirmations)', 'awp.rescan': 'Rescan', 'awp.selectAward': 'Select an award…', 'awp.of': 'of', 'awp.computing': 'Computing…', 'awp.noData': 'No data', 'awp.worked': 'worked', 'awp.confirmed': 'confirmed', 'awp.validated': 'validated', 'awp.ofConfirmed': 'of {total} · {pct}% confirmed', 'awp.byBand': 'By band (confirmed / worked)', 'awp.filterReferences': 'Filter references…', 'awp.filterAll': 'All', 'awp.filterWkd': 'Wkd', 'awp.filterNotWkd': 'Not wkd', 'awp.filterWkdNotCfmd': 'Wkd not cfmd', 'awp.modePhone': 'Phone', 'awp.modeDigital': 'Digital', 'awp.refs': 'refs', 'awp.missingRefsTitle': "Contacts in this award's scope (right DXCC/band/mode) but with no reference — they're excluded until you add it", 'awp.missingRefs': 'Missing refs', 'awp.gridView': 'Grid view', 'awp.listView': 'List view', 'awp.statistics': 'Statistics', 'awp.statistic': 'Statistic', 'awp.total': 'Total', 'awp.grand': 'Grand', 'awp.ref': 'Ref', 'awp.description': 'Description', 'awp.cellTitle': '{ref} · {band} — click to view QSOs', 'awp.name': 'Name', 'awp.groupCol': 'Group', 'awp.status': 'Status', 'awp.bands': 'Bands', 'awp.missing': '— missing', 'awp.contactsMissingRef': 'contacts missing a reference', 'awp.recomputeTitle': "Recompute now — contacts you've fixed drop off the list", 'awp.refresh': 'Refresh', 'awp.missingScopeHelp': "In this award's scope (DXCC / band / mode / dates) but no reference was found — so they don't count yet. Sort by a column, tick the matching contacts, then assign the reference below.", 'awp.orClickRow': '(Or click a row to open the QSO.)', 'awp.selectedArrow': '{n} selected →', 'awp.chooseReference': 'Choose a reference to assign…', 'awp.assignToSelected': 'Assign to {n} selected', 'awp.scanning': 'Scanning…', 'awp.noGaps': 'No gaps found. (Missing-reference detection applies to awards scoped to a DXCC entity — e.g. DDFM, WAS, RAC, WAJA.)', 'awp.dateUtc': 'Date (UTC)', 'awp.callsign': 'Callsign', 'awp.band': 'Band', 'awp.mode': 'Mode', 'awp.country': 'Country', 'awp.qthNote': 'QTH / Note', 'awp.stations': 'stations', 'awp.contactsWithoutRef': 'contacts without a reference', 'awp.assignedMsg': 'Assigned {code}@{ref} to {n} contact(s).', 'awp.loading': 'Loading…', 'awp.noQsos': 'No QSOs.',
-  'awed.addCountry': 'Add country…', 'awed.exportedTo': 'Awards exported to:\n{path}', 'awed.importedMsg': 'Imported {awards} award(s) and {references} reference(s).', 'awed.awardManagement': 'Award management', 'awed.searchAwards': 'Search awards…', 'awed.newAward': 'New award', 'awed.clickToDismiss': 'Click to dismiss', 'awed.selectOrCreate': 'Select or create an award.', 'awed.tabInfo': 'Award info', 'awed.tabType': 'Award type', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'References', 'awed.awardName': 'Award name', 'awed.valid': 'Valid', 'awed.deleteAward': 'Delete award', 'awed.description': 'Description', 'awed.awardUrl': 'Award URL', 'awed.refDisplay': 'Column shows', 'awed.refDisplayRef': 'Reference', 'awed.refDisplayName': 'Description / name', 'awed.refDisplayBoth': 'Both (ref — name)', 'awed.referenceUrl': 'Reference URL', 'awed.validFrom': 'Valid from', 'awed.validTo': 'Valid to', 'awed.dxccFilter': 'DXCC filter', 'awed.validBands': 'Valid bands (empty = all)', 'awed.emission': 'Emission (empty = all)', 'awed.validModes': 'Valid modes (empty = all)', 'awed.awardType': 'Award type', 'awed.dynamicRefs': 'Dynamic references (not predefined — any value counts, like POTA)', 'awed.qsoParams': 'QSO parameters (used by QSOFIELDS / REFERENCE types)', 'awed.searchInField': 'Search in field', 'awed.matchBy': 'Match by', 'awed.exactMatch': 'Exact match (else search reference inside the field)', 'awed.patternRegex': 'Pattern (regex)', 'awed.patternPlaceholder': 'group 1 = reference (for match-by pattern / dynamic)', 'awed.leadingString': 'Leading string', 'awed.trailingString': 'Trailing string', 'awed.additionalSearches': 'Fallback searches', 'awed.orAlsoMatch': '— tried in order, only if nothing matched yet; first hit wins', 'awed.addOr': 'Add OR', 'awed.orSearchIn': 'OR — search in', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Remove this OR search', 'awed.orPatternPlaceholder': 'regex — group 1 = reference (e.g. \\b(\\d{2})\\d{3}\\b for postal → dept)', 'awed.prefixPlaceholder': 'prefix (D)', 'awed.prefixTitle': 'Prepended to each found reference, e.g. 74 → D74', 'awed.confirmationLabel': 'Confirmation (worked → confirmed)', 'awed.validationLabel': 'Validation (confirmed → validated)', 'awed.resetDefaults': 'Reset to defaults', 'awed.exportTitle': 'Export all award definitions + reference lists to a JSON backup', 'awed.export': 'Export…', 'awed.importTitle': 'Import an award bundle (definitions + reference lists)', 'awed.import': 'Import…', 'awed.cancel': 'Cancel', 'awed.save': 'Save', 'awed.populatedMsg': 'Populated {n} built-in references.', 'awed.newRefCodePrompt': 'New reference code:', 'awed.importedRefsMsg': 'Imported {n} references.', 'awed.referenceCount': 'Reference count:', 'awed.applyPreset': 'Apply preset…', 'awed.pasteCsv': 'Paste / CSV', 'awed.populateBuiltinTitle': 'Replace with the shipped built-in list (DXCC entities, French departments, …)', 'awed.populateBuiltin': 'Populate built-in', 'awed.updateOnline': 'Update online', 'awed.add': 'Add', 'awed.onePerLine': 'One reference per line:', 'awed.replacesList': '(comma/semicolon/tab). Replaces the whole list.', 'awed.import2': 'Import', 'awed.search': 'Search…', 'awed.searching': 'Searching…', 'awed.tooManyItems': 'Too many items ({total}). Please refine search (type 2+ characters).', 'awed.noReferences': 'No references.', 'awed.selectReference': 'Select a reference, or Add / import a list.', 'awed.group': 'Group', 'awed.subgroup': 'Subgroup', 'awed.perRefRegex': 'optional per-reference regex', 'awed.grid': 'Grid', 'awed.saveReference': 'Save reference',
+  'awed.addCountry': 'Add country…', 'awed.exportedTo': 'Awards exported to:\n{path}', 'awed.importedMsg': 'Imported {awards} award(s) and {references} reference(s).', 'awed.awardManagement': 'Award management', 'awed.searchAwards': 'Search awards…', 'awed.newAward': 'New award', 'awed.clickToDismiss': 'Click to dismiss', 'awed.selectOrCreate': 'Select or create an award.', 'awed.tabInfo': 'Award info', 'awed.tabType': 'Award type', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'References', 'awed.awardName': 'Award name', 'awed.valid': 'Valid', 'awed.deleteAward': 'Delete award', 'awed.description': 'Description', 'awed.awardUrl': 'Award URL', 'awed.refDisplay': 'Column shows', 'awed.refDisplayRef': 'Reference', 'awed.refDisplayName': 'Description / name', 'awed.refDisplayBoth': 'Both (ref — name)', 'awed.referenceUrl': 'Reference URL', 'awed.validFrom': 'Valid from', 'awed.validTo': 'Valid to', 'awed.dxccFilter': 'DXCC filter', 'awed.validBands': 'Valid bands (empty = all)', 'awed.emission': 'Emission (empty = all)', 'awed.validModes': 'Valid modes (empty = all)', 'awed.awardType': 'Award type', 'awed.dynamicRefs': 'Dynamic references (not predefined — any value counts, like POTA)', 'awed.qsoParams': 'QSO parameters (used by QSOFIELDS / REFERENCE types)', 'awed.searchInField': 'Search in field', 'awed.matchBy': 'Match by', 'awed.exactMatch': 'Exact match (else search reference inside the field)', 'awed.oneRef': 'One reference per QSO', 'awed.oneRefHint': 'When several references match the same contact, assign none and list it under missing references. For awards where two entries can share a description — two DOKs called Gießen — picking one at random would write the wrong one into the log.', 'awed.patternRegex': 'Pattern (regex)', 'awed.patternPlaceholder': 'group 1 = reference (for match-by pattern / dynamic)', 'awed.leadingString': 'Leading string', 'awed.trailingString': 'Trailing string', 'awed.additionalSearches': 'Fallback searches', 'awed.orAlsoMatch': '— tried in order, only if nothing matched yet; first hit wins', 'awed.addOr': 'Add OR', 'awed.orSearchIn': 'OR — search in', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Remove this OR search', 'awed.orPatternPlaceholder': 'regex — group 1 = reference (e.g. \\b(\\d{2})\\d{3}\\b for postal → dept)', 'awed.prefixPlaceholder': 'prefix (D)', 'awed.prefixTitle': 'Prepended to each found reference, e.g. 74 → D74', 'awed.confirmationLabel': 'Confirmation (worked → confirmed)', 'awed.validationLabel': 'Validation (confirmed → validated)', 'awed.resetDefaults': 'Reset to defaults', 'awed.exportTitle': 'Export all award definitions + reference lists to a JSON backup', 'awed.export': 'Export…', 'awed.importTitle': 'Import an award bundle (definitions + reference lists)', 'awed.import': 'Import…', 'awed.cancel': 'Cancel', 'awed.save': 'Save', 'awed.populatedMsg': 'Populated {n} built-in references.', 'awed.newRefCodePrompt': 'New reference code:', 'awed.importedRefsMsg': 'Imported {n} references.', 'awed.referenceCount': 'Reference count:', 'awed.applyPreset': 'Apply preset…', 'awed.pasteCsv': 'Paste / CSV', 'awed.populateBuiltinTitle': 'Replace with the shipped built-in list (DXCC entities, French departments, …)', 'awed.populateBuiltin': 'Populate built-in', 'awed.updateOnline': 'Update online', 'awed.add': 'Add', 'awed.onePerLine': 'One reference per line:', 'awed.replacesList': '(comma/semicolon/tab). Replaces the whole list.', 'awed.import2': 'Import', 'awed.search': 'Search…', 'awed.searching': 'Searching…', 'awed.tooManyItems': 'Too many items ({total}). Please refine search (type 2+ characters).', 'awed.noReferences': 'No references.', 'awed.selectReference': 'Select a reference, or Add / import a list.', 'awed.group': 'Group', 'awed.subgroup': 'Subgroup', 'awed.perRefRegex': 'optional per-reference regex', 'awed.grid': 'Grid', 'awed.saveReference': 'Save reference',
   'awed.updateAvailable': 'An updated version of this award is available', 'awed.updateOverwrites': 'You have modified this award, so the update was not applied. Taking it replaces your definition and reference list.', 'awed.updateApply': 'Update', 'awed.updateKeepMine': 'Keep mine',
-  'awed.tabTest': 'Test', 'awed.testCallsign': 'Test against callsign', 'awed.testRun': 'Test', 'awed.testSavedOnly': 'Tests the SAVED award — save your changes first.', 'awed.testNoMatch': 'no match', 'awed.testOutOfScope': 'QSO out of scope — no rule was run.', 'awed.testSkipped': 'not run: an earlier rule already matched', 'awed.testFieldValue': 'Field', 'awed.testEmptyField': 'empty', 'awed.testNoCandidate': 'produced no candidate', 'awed.testManual': 'Manual override', 'awed.testSameAs': '+{n} other QSO(s), same result',
+  'awed.tabTest': 'Test', 'awed.testCallsign': 'Test against callsign', 'awed.testRun': 'Test', 'awed.testSavedOnly': 'Tests the SAVED award — save your changes first.', 'awed.testNoMatch': 'no match', 'awed.testOutOfScope': 'QSO out of scope — no rule was run.', 'awed.testSkipped': 'not run: an earlier rule already matched', 'awed.testFieldValue': 'Field', 'awed.testEmptyField': 'empty', 'awed.testNoCandidate': 'produced no candidate', 'awed.testManual': 'Manual override', 'awed.testAmbiguous': 'Ambiguous', 'awed.testAmbiguousHint': '— none kept, this award allows one reference per QSO. Assign the right one by hand.', 'awed.testSameAs': '+{n} other QSO(s), same result',
   'awed.exportOne': 'Share {code}',
   'awed.onlyHere': 'local',
   'awed.onlyHereTip': 'Yours — not shipped with OpsLog. Its JSON is kept up to date in the awards folder; send that file to share it.',
@@ -464,7 +464,7 @@ const fr: Dict = {
   'dup.selectExtras': 'Tout sélectionner sauf le premier', 'dup.deselectAll': 'Tout désélectionner', 'dup.deleteSel': 'Supprimer {n} sélectionné(s)', 'dup.deleteConfirm': 'Supprimer {n} QSO ? Action irréversible.', 'dup.deleted': '{n} doublon(s) supprimé(s)', 'dup.keep': 'le plus ancien', 'dup.close': 'Fermer',
   'dup.colDate': 'Date / heure (UTC)', 'dup.colFreq': 'Fréq', 'dup.colRst': 'RST e/r', 'dup.colName': 'Nom',
   'profileScope.saved': 'Enregistré pour le profil', 'profileScope.switch': "— change de profil pour éditer une autre identité.",
-  'tab.main': 'Principal', 'tab.recent': 'QSO récents', 'tab.cluster': 'Cluster', 'tab.worked': 'Déjà contacté',
+  'tab.main': 'Principal', 'main.splitTip': 'Faites glisser pour redimensionner les volets — double-clic pour les égaliser', 'tab.recent': 'QSO récents', 'tab.cluster': 'Cluster', 'tab.worked': 'Déjà contacté',
   'tab.awards': 'Diplômes', 'tab.bandmap': 'Carte de bande', 'tab.contest': 'Contest', 'tab.net': 'NET',
   'field.callsign': 'Indicatif', 'field.name': 'Nom', 'field.qth': 'QTH', 'field.grid': 'Locator',
   'field.band': 'Bande', 'field.mode': 'Mode', 'field.country': 'Pays', 'field.comment': 'Commentaire',
@@ -678,7 +678,7 @@ const fr: Dict = {
   'rot.enable': 'Activer le contrôle du rotator', 'rot.testOkRG': 'Connecté — le Rotator Genius a accepté la commande (rotation vers 0°).',  'rot.type': 'Type de rotator', 'rot.rotatorNum': 'Rotator n°', 'rot.rgHint': 'Parle directement à un Rotator Genius 4O3A en TCP (port 9006 par défaut) — sans PstRotator. Le n° choisit lequel des deux rotators du boîtier piloter.', 'rot.arcoHint': "Parle directement à tout contrôleur réglé sur Yaesu GS-232A — sans PstRotator. microHAM ARCO : régler Config → LAN → CONTROL PROTOCOL (ou USB CONTROL PROTOCOL) sur « Yaesu GS-232A » ; en USB la vitesse est sans importance. ERC (Easy Rotor Control, ERC Mini compris) : son émulation DOIT être réglée sur GS-232 — un ERC laissé en Hy-Gain DCU-1 parle un autre jeu de commandes et ne répondra pas — puis choisir son port COM et la même vitesse que dans la configuration de l'ERC.", 'rot.hint': "OpsLog envoie des commandes UDP à PstRotator. Active l'écouteur UDP de PstRotator (Setup → Communication → UDP) avant de tester.",
   'extsvc.hint': "Envoie les QSO enregistrés vers des carnets en ligne. Chaque service upload automatiquement à chaque nouveau QSO si activé ; le délai est propre à chaque service (immédiat, ou 1–2 min pour corriger un QSO mal saisi avant).",
   'hw.motorTxInhibit': "Inhiber la transmission pendant que l'antenne bouge", 'hw.motorTxInhibitHint': "Empêche le FlexRadio d'émettre pendant que les éléments bougent (nécessite le FlexRadio en API + cette antenne activée). Sans effet avec les autres radios.", 'hw.motorAntenna': 'Antenne motorisée', 'hw.motorEnable': "Activer le contrôle de l'antenne", 'hw.motorType': "Type d'antenne", 'hw.motorTransport': 'Connexion', 'hw.motorTcp': 'Réseau (TCP)', 'hw.motorSerial': 'Série (COM)', 'hw.motorCom': 'Port série', 'hw.motorBaud': 'Débit', 'hw.steppirHint': "Les contrôleurs SteppIR sont en RS-232 série (port DB9 « DATA OUT »). Série = un adaptateur USB↔RS-232 (FTDI), vu comme un port COM. Réseau = un pont série-Ethernet (comme pour l'Ultrabeam).", 'hw.steppirRange': 'Plage accordable', 'hw.steppirRangeHint': "La couverture en fréquence de la SteppIR. Sur une bande hors de cette plage (p. ex. 30 m avec une SteppIR 20 m-6 m), OpsLog n'essaie pas d'accorder l'antenne et n'inhibe pas l'émission. Défaut 13-54 MHz (20 m-6 m) ; abaisse la borne basse (p. ex. 6) pour une SteppIR équipée 40 m.", 'hw.ultrabeam': 'Antenne (Ultrabeam)', 'hw.audioVoice': 'Périphériques audio & manipulateur vocal',
-  'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un backend CAT natif occupe le port série de la radio, aucun autre logiciel ne peut donc y accéder. Ceci permet à WSJT-X, JTDX, MSHV ou Log4OM de dialoguer avec la radio À TRAVERS OpsLog : dans l'autre logiciel, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532. Fonctionne avec tous les backends, pas seulement les natifs.", 'cat.sharePort': 'Port de partage', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.kenwoodHostHint': 'Un pont s\u00e9rie-r\u00e9seau \u2014 ser2net, un bo\u00eetier Ethernet-s\u00e9rie, un Raspberry Pi pr\u00e8s de la radio. S\u2019il est rempli, il est utilis\u00e9 \u00c0 LA PLACE du port COM ci-dessus. Il ne s\u2019agit pas de la prise RJ45 de la radio, qui parle le protocole KNS de Kenwood et n\u2019est pas prise en charge.', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9',
+  'cat.enable': 'Activer le CAT', 'cat.backend': 'Backend', 'cat.optOmnirig': 'OmniRig', 'cat.optFlex': 'FlexRadio (API)', 'cat.share': 'Partager le CAT avec les autres logiciels', 'cat.shareHint': "Un backend CAT natif occupe le port série de la radio, aucun autre logiciel ne peut donc y accéder. Ceci permet à WSJT-X, JTDX, MSHV ou Log4OM de dialoguer avec la radio À TRAVERS OpsLog : dans l'autre logiciel, choisissez le modèle « Hamlib NET rigctl » et saisissez 127.0.0.1:4532. Fonctionne avec tous les backends, pas seulement les natifs.", 'cat.sharePort': 'Port de partage', 'cat.optXiegu': 'Xiegu (USB)', 'cat.xieguPort': 'Port CAT Xiegu', 'cat.xieguBaudHint': 'Doit correspondre au menu de la radio (G90 par défaut : 19200).', 'cat.xieguAddrHint': "Adresse CI-V d'usine de la famille G90/X6100 : 0x70.", 'cat.xieguPTTLine': 'Passage en \u00e9mission', 'cat.xieguPTTCiv': 'Commande CI-V', 'cat.xieguPTTHint': 'Un G90 ne passe pas en \u00e9mission sur la commande CI-V : les interfaces comme le DE-19 le pilotent par RTS ou DTR. Choisissez la ligne de la v\u00f4tre \u2014 c\u2019est aussi ce qui permet \u00e0 WSJT-X d\u2019\u00e9mettre via le partage CAT.', 'cat.optYaesu': 'Yaesu (USB)', 'cat.optKenwood': 'Kenwood (USB, réseau)', 'cat.civTrace': 'Journaliser le protocole CAT', 'cat.civTraceHint': '\u00c9crit dans le journal chaque trame CAT \u00e9chang\u00e9e avec la radio \u2014 CI-V en hexad\u00e9cimal, Kenwood en texte. Pour signaler une radio qui r\u00e9pond de travers \u2014 un bouton qui fait autre chose, une fr\u00e9quence qui saute. Valable pour la session seulement : c\u2019est un diagnostic, et le journal grossit vite.', 'cat.kenwoodPort': 'Port COM Kenwood', 'cat.kenwoodPortHint': 'Le port s\u00e9rie CAT/USB de la radio (TS-590, TS-890, TS-990, TS-2000, ainsi que les Elecraft K3/K4 qui parlent le m\u00eame dialecte).', 'cat.kenwoodBaudHint': 'Doit correspondre au MENU de la radio : un TS-590 sort d\u2019usine \u00e0 9600, un TS-890 \u00e0 115200.', 'cat.kenwoodHost': 'Ou par le r\u00e9seau (h\u00f4te:port)', 'cat.kenwoodHostHint': 'Un pont s\u00e9rie-r\u00e9seau \u2014 ser2net, un bo\u00eetier Ethernet-s\u00e9rie, un Raspberry Pi pr\u00e8s de la radio. S\u2019il est rempli, il est utilis\u00e9 \u00c0 LA PLACE du port COM ci-dessus. Il ne s\u2019agit pas de la prise RJ45 de la radio, qui parle le protocole KNS de Kenwood et n\u2019est pas prise en charge.', 'cat.yaesuPort': 'Port CAT Yaesu', 'cat.yaesuPortHint': "Le port CAT de la radio — sur un FTDX10/FTDX101 en USB c'est le port COM ENHANCED, pas le standard.", 'cat.yaesuBaudHint': 'Doit correspondre au menu de la radio (FTDX10/FTDX101 par défaut : 38400).', 'cat.optIcom': 'Icom (CI-V USB)', 'cat.optIcomNet': 'Icom (CI-V réseau)', 'cat.optTci': 'TCI', 'flxpw.title': 'FlexRadio \u2014 puissance par bande et par mode', 'flxpw.hint': 'Puissance d\u2019\u00e9mission appliqu\u00e9e au changement de bande ou de mode. Laissez une case vide pour ne pas toucher \u00e0 la puissance.', 'flxpw.band': 'Bande', 'flxb.title': 'FlexRadio \u2014 antennes et puissance par bande', 'flxb.hint': 'Les antennes sont appliqu\u00e9es au changement de bande ; la puissance au changement de bande ou de mode. Laissez une case de puissance vide pour ne pas y toucher.', 'flxb.rxAnt': 'Antenne RX', 'flxb.txAnt': 'Antenne TX', 'flxb.noRadio': 'Aucune antenne remont\u00e9e \u2014 connectez le FlexRadio, puis rouvrez ce panneau.', 'flxpw.phone': 'Phonie', 'flxpw.digi': 'Num\u00e9rique', 'flxpw.noBands': 'Aucune bande configur\u00e9e \u2014 ajoutez-les dans Listes \u2192 Bandes.', 'flxpw.saved': 'Enregistr\u00e9',
   'cat.icomNetHost': 'IP / nom d\'hôte du poste', 'cat.icomNetUser': 'Utilisateur réseau (ID)', 'cat.icomNetPass': 'Mot de passe réseau',
   'cat.icomNetHint': "Se connecte directement au serveur LAN intégré du poste — sans RS-BA1 ni Remote Utility (ferme-les d'abord). Utilise l'ID/mot de passe Network User1 configurés dans le menu Network du poste. Un poste en veille est allumé automatiquement.",
   'cat.icomNetAudio': 'Diffuser l’audio RX par le réseau (expérimental)',
@@ -760,13 +760,13 @@ const fr: Dict = {
   'ncp.newNetPrompt': 'Nom du nouveau NET :', 'ncp.renamePrompt': 'Renommer le NET :', 'ncp.deleteConfirm': 'Supprimer le NET « {name} » et son répertoire ? Cette action est irréversible.', 'ncp.closeConfirm': "{n} station(s) encore en l'air seront retirées SANS être enregistrées. Fermer quand même ?", 'ncp.removeConfirm': 'Retirer {n} station(s) du répertoire de ce NET ?', 'ncp.colCallsign': 'Indicatif', 'ncp.colName': 'Nom', 'ncp.colTimeOn': 'Heure début', 'ncp.colBand': 'Bande', 'ncp.colMode': 'Mode', 'ncp.colComment': 'Commentaire', 'ncp.colCountry': 'Pays', 'ncp.colDate': 'Date', 'ncp.workedBefore': 'Déjà contacté', 'ncp.wbHint': 'Cliquer une station (on air ou roster) pour voir les QSO précédents', 'ncp.wbNone': 'Aucun QSO précédent avec', 'ncp.wbFirst': 'premier', 'ncp.wbLast': 'dernier', 'ncp.wbResize': 'Glisser pour redimensionner', 'ncp.newNet': 'Nouveau NET', 'ncp.closeToSwitch': 'Ferme le NET pour changer', 'ncp.selectNetTitle': 'Sélectionne un NET', 'ncp.selectNetOption': '— sélectionner un NET —', 'ncp.closeNet': 'Fermer le NET', 'ncp.openNet': 'Ouvrir le NET', 'ncp.rename': 'Renommer', 'ncp.delete': 'Supprimer', 'ncp.netOpenBadge': 'NET OUVERT', 'ncp.onAir': "En l'air :", 'ncp.roster': 'Répertoire :', 'ncp.onAirActive': "En l'air — QSO actifs", 'ncp.activeHint': 'ordre de passage du micro · ⬆⬇ pour réordonner · double-clic → éditer · « Logger & terminer »', 'ncp.moveUp': "Monter dans l'ordre de passage", 'ncp.moveDown': "Descendre dans l'ordre de passage", 'ncp.logEndSelected': 'Logger & terminer la sélection', 'ncp.logAll': 'Logger tout le monde ({n})', 'ncp.logAllConfirm': 'Logger les {n} station(s) on air dans le logbook ?', 'ncp.netUsersRoster': 'Membres du NET — répertoire', 'ncp.rosterHint': "double-clic → mettre en l'air", 'ncp.addContact': 'Ajouter un contact', 'ncp.remove': 'Retirer', 'ncp.putOnAir': "Mettre la sélection en l'air", 'ncp.addContactTitle': 'Ajouter un contact au NET', 'ncp.addContactDesc': 'Enregistré dans le répertoire de ce NET (réutilisé à la prochaine ouverture).', 'ncp.callsign': 'Indicatif', 'ncp.search': 'Rechercher', 'ncp.name': 'Nom', 'ncp.country': 'Pays', 'ncp.cancel': 'Annuler', 'ncp.saveInNet': 'Enregistrer dans le NET',
   'udpp.svcWsjtLabel': 'WSJT-X / JTDX / MSHV', 'udpp.svcWsjtHint': "Logue automatiquement les QSO FT8/FT4/etc. et remplit l'indicatif de saisie en direct.", 'udpp.svcAdifLabel': 'Message ADIF (JTAlert, GridTracker)', 'udpp.svcAdifHint': 'Reçoit un seul enregistrement ADIF par paquet et le logue.', 'udpp.svcN1mmLabel': 'N1MM Logger+ (XML contest)', 'udpp.svcN1mmHint': 'Reçoit les QSO de contest sous forme de messages XML.', 'udpp.svcRemoteLabel': 'Indicatif distant (DXHunter, personnalisé)', 'udpp.svcRemoteHint': 'Un court paquet texte contenant juste un indicatif — remplit le champ de saisie.', 'udpp.svcDbLabel': "ADIF Message", 'udpp.svcDbHint': "Envoie l'ADIF de chaque QSO enregistré vers un écouteur distant (Cloudlog UDP, N1MM…).", 'udpp.svcPstLabel': 'Fréquence PstRotator', 'udpp.svcPstHint': "Envoie la fréquence du poste en <PST><FREQUENCY> à chaque changement — règle le tracker de PstRotatorAz sur DXLog.net (port 12040 par défaut).", 'udpp.svcN1mmRadioLabel': 'N1MM RadioInfo (fréq + mode)', 'udpp.svcN1mmRadioHint': "Diffuse la fréquence/mode du poste en XML RadioInfo N1MM Logger+ à chaque changement — lu par PstRotator (tracker N1MM) et beaucoup d'autres outils.", 'udpp.deleteConfirm': 'Supprimer cette connexion UDP ?', 'udpp.loading': 'Chargement…', 'udpp.intro': "Les connexions UDP permettent à OpsLog de dialoguer avec d'autres logiciels radioamateurs. Les connexions entrantes reçoivent des QSO ou des indicatifs et mettent le journal à jour en direct ; les connexions sortantes notifient d'autres apps quand tu enregistres un QSO localement. Active le multicast pour partager un port avec un autre écouteur sans conflit — nécessaire pour la config WSJT-X 2237 classique.", 'udpp.inboundTitle': 'Entrant — OpsLog écoute', 'udpp.outboundTitle': 'Sortant — OpsLog envoie', 'udpp.reloadAll': 'Tout recharger', 'udpp.reloadHint': 'Redémarre chaque écouteur activé après une modification manuelle.', 'udpp.add': 'Ajouter', 'udpp.noConnection': 'Aucune connexion.', 'udpp.unnamed': '(sans nom)', 'udpp.dialogTitle': '{action} connexion {direction}', 'udpp.new': 'Nouvelle', 'udpp.edit': 'Modifier', 'udpp.directionInbound': 'entrante', 'udpp.directionOutbound': 'sortante', 'udpp.name': 'Nom', 'udpp.namePhInbound': 'Log WSJT-X', 'udpp.namePhOutbound': 'Notification Cloudlog', 'udpp.serviceType': 'Type de service', 'udpp.port': 'Port', 'udpp.multicast': 'Multicast', 'udpp.multicastGroup': 'Groupe multicast', 'udpp.multicastHint': "Utilise la même adresse de groupe que l'app émettrice. Le défaut WSJT-X est 224.0.0.1.", 'udpp.destinationIp': 'IP de destination', 'udpp.enabled': 'Activé', 'udpp.cancel': 'Annuler', 'udpp.save': 'Enregistrer',
   'fltb.fCallsign': 'Callsign', 'fltb.fDate': 'Date / time (UTC)', 'fltb.fEndDate': 'End date / time', 'fltb.fBand': 'Band', 'fltb.fRxBand': 'RX band', 'fltb.fMode': 'Mode', 'fltb.fSubmode': 'Submode', 'fltb.fFreq': 'Frequency (Hz)', 'fltb.fRxFreq': 'RX frequency (Hz)', 'fltb.fRstSent': 'RST sent', 'fltb.fRstRcvd': 'RST rcvd', 'fltb.fName': 'Name', 'fltb.fQth': 'QTH', 'fltb.fAddress': 'Address', 'fltb.fEmail': 'E-mail', 'fltb.fGrid': 'Grid', 'fltb.fCountry': 'Country', 'fltb.fState': 'State', 'fltb.fCounty': 'County', 'fltb.fDxcc': 'DXCC #', 'fltb.fContinent': 'Continent', 'fltb.fCqz': 'CQ zone', 'fltb.fItuz': 'ITU zone', 'fltb.fIota': 'IOTA', 'fltb.fSota': 'SOTA ref', 'fltb.fPota': 'POTA ref', 'fltb.fWwff': 'WWFF ref', 'fltb.fRig': 'Rig', 'fltb.fAntenna': 'Antenna', 'fltb.fQslSent': 'Paper QSL sent status', 'fltb.fQslSentDate': 'Paper QSL sent date', 'fltb.fQslRcvd': 'Paper QSL received status', 'fltb.fQslRcvdDate': 'Paper QSL received date', 'fltb.fQslVia': 'QSL via', 'fltb.fLotwSent': 'LoTW sent status', 'fltb.fLotwSentDate': 'LoTW sent date', 'fltb.fLotwRcvd': 'LoTW received status', 'fltb.fLotwRcvdDate': 'LoTW received date', 'fltb.fEqslSent': 'eQSL sent status', 'fltb.fEqslSentDate': 'eQSL sent date', 'fltb.fEqslRcvd': 'eQSL received status', 'fltb.fEqslRcvdDate': 'eQSL received date', 'fltb.fQrzSent': 'QRZ.com sent status', 'fltb.fQrzSentDate': 'QRZ.com sent date', 'fltb.fQrzRcvd': 'QRZ.com received status', 'fltb.fQrzRcvdDate': 'QRZ.com received date', 'fltb.fClublogSent': 'Club Log sent status', 'fltb.fClublogSentDate': 'Club Log sent date', 'fltb.fHrdlogSent': 'HRDLog sent status', 'fltb.fHrdlogSentDate': 'HRDLog sent date', 'fltb.fContestId': 'Contest ID', 'fltb.fSerialRcvd': 'Serial rcvd', 'fltb.fSerialSent': 'Serial sent', 'fltb.fPropMode': 'Propagation mode', 'fltb.fSatellite': 'Satellite', 'fltb.fMyCallsign': 'Station callsign (my call)', 'fltb.fOperator': 'Operator', 'fltb.fOwnerCallsign': 'Owner callsign', 'fltb.fMyGrid': 'My grid', 'fltb.fMyCountry': 'My country', 'fltb.fMyState': 'My state', 'fltb.fMyCounty': 'My county', 'fltb.fMyIota': 'My IOTA', 'fltb.fMySota': 'My SOTA ref', 'fltb.fMyPota': 'My POTA ref', 'fltb.fMyWwff': 'My WWFF ref', 'fltb.fMyStreet': 'My street', 'fltb.fMyCity': 'My city', 'fltb.fMyPostal': 'My postal code', 'fltb.fMyRig': 'My rig', 'fltb.fMyAntenna': 'My antenna', 'fltb.fTxPower': 'TX power (W)', 'fltb.fComment': 'Comment', 'fltb.fNotes': 'Notes', 'fltb.opEq': 'égal (=)', 'fltb.opNe': 'différent (≠)', 'fltb.opContains': 'contient', 'fltb.opStartsWith': 'commence par', 'fltb.opEndsWith': 'finit par', 'fltb.opGt': 'supérieur à (>)', 'fltb.opLt': 'inférieur à (<)', 'fltb.opGe': 'supérieur ou égal (≥)', 'fltb.opLe': 'inférieur ou égal (≤)', 'fltb.opEmpty': 'est vide', 'fltb.opNotEmpty': "n'est pas vide", 'fltb.title': 'Filtre QSO', 'fltb.match': 'Correspondance', 'fltb.all': 'TOUS (ET)', 'fltb.any': 'AU MOINS UN (OU)', 'fltb.loadPreset': 'Charger un préréglage…', 'fltb.noConditions': 'Aucune condition — la liste affiche tous les QSO. Ajoutes-en une ci-dessous.', 'fltb.where': 'OÙ', 'fltb.valuePh': 'valeur', 'fltb.remove': 'Retirer', 'fltb.addCondition': 'Ajouter une condition', 'fltb.presetNamePh': 'Nom du préréglage…', 'fltb.savePreset': 'Enregistrer le préréglage', 'fltb.clear': 'Effacer', 'fltb.cancel': 'Annuler', 'fltb.applyClose': 'Appliquer & fermer',
-  'detp.propAS': 'Diffusion par avion', 'detp.propAUR': 'Aurore', 'detp.propAUE': 'Aurore-E', 'detp.propBS': 'Rétrodiffusion', 'detp.propEME': 'Terre-Lune-Terre', 'detp.propES': 'Sporadique E', 'detp.propFAI': 'Irrégularités alignées au champ', 'detp.propF2': 'Réflexion F2', 'detp.propGWAVE': 'Onde de sol', 'detp.propINTERNET': 'Assisté par Internet', 'detp.propION': 'Diffusion ionosphérique', 'detp.propLOS': 'Vue directe', 'detp.propMS': 'Diffusion météoritique', 'detp.propRPT': 'Répéteur terrestre / atmosphérique', 'detp.propRS': 'Diffusion par la pluie', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-équatorial', 'detp.propTR': 'Conduit troposphérique', 'detp.pathShort': 'Chemin court', 'detp.pathLong': 'Chemin long', 'detp.pathGrayline': 'Ligne grise', 'detp.pathOther': 'Autre', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Diplômes', 'detp.tabMy': 'Moi', 'detp.tabExtended': 'Étendu', 'detp.statePref': 'État / préf', 'detp.county': 'Comté', 'detp.prefix': 'Préfixe', 'detp.cqZone': 'Zone CQ', 'detp.ituZone': 'Zone ITU', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimut LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Adresse', 'detp.qslMessage': 'Message QSL', 'detp.qslVia': 'QSL via', 'detp.detected': 'Détecté — ce contact comptera pour :', 'detp.azimuth': 'Azimut (°)', 'detp.elevation': 'Élévation (°)', 'detp.txPower': 'Puissance TX (W)', 'detp.satelliteMode': 'Mode satellite', 'detp.antPath': 'Chemin ant.', 'detp.propagation': 'Propagation', 'detp.rig': 'Station', 'detp.antenna': 'Antenne', 'detp.satName': 'Nom du satellite', 'detp.contestId': 'ID contest', 'detp.rcvdExchangePh': 'échange reçu', 'detp.sentExchangePh': 'échange envoyé', 'detp.contactedEmail': 'E-mail du contact',
+  'detp.propAS': 'Diffusion par avion', 'detp.propAUR': 'Aurore', 'detp.propAUE': 'Aurore-E', 'detp.propBS': 'Rétrodiffusion', 'detp.propEME': 'Terre-Lune-Terre', 'detp.propES': 'Sporadique E', 'detp.propFAI': 'Irrégularités alignées au champ', 'detp.propF2': 'Réflexion F2', 'detp.propGWAVE': 'Onde de sol', 'detp.propINTERNET': 'Assisté par Internet', 'detp.propION': 'Diffusion ionosphérique', 'detp.propLOS': 'Vue directe', 'detp.propMS': 'Diffusion météoritique', 'detp.propRPT': 'Répéteur terrestre / atmosphérique', 'detp.propRS': 'Diffusion par la pluie', 'detp.propSAT': 'Satellite', 'detp.propTEP': 'Trans-équatorial', 'detp.propTR': 'Conduit troposphérique', 'detp.pathShort': 'Chemin court', 'detp.pathLong': 'Chemin long', 'detp.pathGrayline': 'Ligne grise', 'detp.pathOther': 'Autre', 'detp.tabStats': 'Stats', 'detp.tabInfo': 'Info', 'detp.tabAwards': 'Diplômes', 'detp.tabMy': 'Moi', 'detp.tabExtended': 'Étendu', 'detp.statePref': 'État / préf', 'detp.county': 'Comté', 'detp.newCounty': 'NOUV', 'detp.newCountyTip': 'Comté jamais contacté', 'detp.prefix': 'Préfixe', 'detp.cqZone': 'CQ', 'detp.ituZone': 'ITU', 'detp.dxcc': 'DXCC #', 'detp.azimuthLp': 'Azimut LP', 'detp.distanceSp': 'Distance SP', 'detp.distanceLp': 'Distance LP', 'detp.address': 'Adresse', 'detp.qslMessage': 'Message QSL', 'detp.qslVia': 'QSL via', 'detp.detected': 'Détecté — ce contact comptera pour :', 'detp.ambiguous': 'Ambigu — choisissez :', 'detp.azimuth': 'Azimut (°)', 'detp.elevation': 'Élévation (°)', 'detp.txPower': 'Puissance TX (W)', 'detp.satelliteMode': 'Mode satellite', 'detp.antPath': 'Chemin ant.', 'detp.propagation': 'Propagation', 'detp.rig': 'Station', 'detp.antenna': 'Antenne', 'detp.satName': 'Nom du satellite', 'detp.contestId': 'ID contest', 'detp.rcvdExchangePh': 'échange reçu', 'detp.sentExchangePh': 'échange envoyé', 'detp.contactedEmail': 'E-mail du contact',
   'awrp.remove': 'Retirer', 'awrp.searchLabel': 'Rechercher {label}…', 'awrp.searching': 'Recherche…', 'awrp.noMatch': 'Aucune correspondance.', 'awrp.noMatchDxcc': 'Aucune correspondance pour ce DXCC.',
   'awrs.group': 'Groupe', 'awrs.sub': 'Sous', 'awrs.pickReference': '← choisis une référence', 'awrs.add': 'Ajouter', 'awrs.enterCallsignFirst': "Saisis d'abord un indicatif", 'awrs.noRefsAdded': 'Aucune référence ajoutée', 'awrs.references': 'Références', 'awrs.autoMatchTitle': 'Le champ {field} vaut {code} — ce diplôme le compte automatiquement', 'awrs.fromField': 'depuis {field}', 'awrs.autoClickToAdd': 'auto — clic pour ajouter', 'awrs.search': 'Rechercher…', 'awrs.addUnlistedTitle': "Ajouter cette référence même si elle n'est pas encore dans la liste (nouvelle / non listée)", 'awrs.addPrefix': '+ Ajouter', 'awrs.unlisted': '(non listée)', 'awrs.searching': 'Recherche…', 'awrs.typeToSearch': 'Tape 2+ caractères pour chercher', 'awrs.enterCallsignOrSearch': 'Saisis un indicatif, ou tape pour chercher.', 'awrs.noRefsForEntity': 'Aucune référence pour cette entité.', 'awrs.noResults': 'Aucun résultat.', 'awrs.downloadLists': 'Télécharge les listes de références dans le panneau Diplômes → Importer les données.',
   'awp.awards': 'Diplômes', 'awp.editAwards': 'Éditer les diplômes', 'awp.rescanTitle': 'Recharger le journal et recalculer (récupère les nouvelles confirmations LoTW/QRZ)', 'awp.rescan': 'Rescan', 'awp.selectAward': 'Sélectionner un diplôme…', 'awp.of': 'sur', 'awp.computing': 'Calcul…', 'awp.noData': 'Aucune donnée', 'awp.worked': 'contacté', 'awp.confirmed': 'confirmé', 'awp.validated': 'validé', 'awp.ofConfirmed': 'sur {total} · {pct}% confirmés', 'awp.byBand': 'Par bande (confirmés / contactés)', 'awp.filterReferences': 'Filtrer les références…', 'awp.filterAll': 'Tous', 'awp.filterWkd': 'Contactés', 'awp.filterNotWkd': 'Non contactés', 'awp.filterWkdNotCfmd': 'Contactés non conf.', 'awp.modePhone': 'Phonie', 'awp.modeDigital': 'Numérique', 'awp.refs': 'réf.', 'awp.missingRefsTitle': "Contacts dans le périmètre de ce diplôme (bon DXCC/bande/mode) mais sans référence — exclus tant que tu n'en ajoutes pas", 'awp.missingRefs': 'Réf. manquantes', 'awp.gridView': 'Vue grille', 'awp.listView': 'Vue liste', 'awp.statistics': 'Statistiques', 'awp.statistic': 'Statistique', 'awp.total': 'Total', 'awp.grand': 'Général', 'awp.ref': 'Réf', 'awp.description': 'Description', 'awp.cellTitle': '{ref} · {band} — clic pour voir les QSO', 'awp.name': 'Nom', 'awp.groupCol': 'Groupe', 'awp.status': 'Statut', 'awp.bands': 'Bandes', 'awp.missing': '— manquant', 'awp.contactsMissingRef': 'contacts sans référence', 'awp.recomputeTitle': 'Recalculer — les contacts corrigés disparaissent de la liste', 'awp.refresh': 'Rafraîchir', 'awp.missingScopeHelp': 'Dans le périmètre de ce diplôme (DXCC / bande / mode / dates) mais aucune référence trouvée — ils ne comptent donc pas encore. Trie par colonne, coche les contacts concernés, puis attribue la référence ci-dessous.', 'awp.orClickRow': '(Ou clique une ligne pour ouvrir le QSO.)', 'awp.selectedArrow': '{n} sélectionné(s) →', 'awp.chooseReference': 'Choisir une référence à attribuer…', 'awp.assignToSelected': 'Attribuer à {n} sélectionné(s)', 'awp.scanning': 'Analyse…', 'awp.noGaps': "Aucun manque trouvé. (La détection de référence manquante s'applique aux diplômes limités à une entité DXCC — ex. DDFM, WAS, RAC, WAJA.)", 'awp.dateUtc': 'Date (UTC)', 'awp.callsign': 'Indicatif', 'awp.band': 'Bande', 'awp.mode': 'Mode', 'awp.country': 'Pays', 'awp.qthNote': 'QTH / Note', 'awp.stations': 'stations', 'awp.contactsWithoutRef': 'contacts sans référence', 'awp.assignedMsg': '{code}@{ref} attribué à {n} contact(s).', 'awp.loading': 'Chargement…', 'awp.noQsos': 'Aucun QSO.',
-  'awed.addCountry': 'Ajouter un pays…', 'awed.exportedTo': 'Diplômes exportés vers :\n{path}', 'awed.importedMsg': '{awards} diplôme(s) et {references} référence(s) importés.', 'awed.awardManagement': 'Gestion des diplômes', 'awed.searchAwards': 'Rechercher un diplôme…', 'awed.newAward': 'Nouveau diplôme', 'awed.clickToDismiss': 'Cliquer pour fermer', 'awed.selectOrCreate': 'Sélectionne ou crée un diplôme.', 'awed.tabInfo': 'Infos diplôme', 'awed.tabType': 'Type de diplôme', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'Références', 'awed.awardName': 'Nom du diplôme', 'awed.valid': 'Valide', 'awed.deleteAward': 'Supprimer le diplôme', 'awed.description': 'Description', 'awed.awardUrl': 'URL du diplôme', 'awed.refDisplay': 'La colonne affiche', 'awed.refDisplayRef': 'Référence', 'awed.refDisplayName': 'Description / nom', 'awed.refDisplayBoth': 'Les deux (réf — nom)', 'awed.referenceUrl': 'URL de référence', 'awed.validFrom': 'Valide du', 'awed.validTo': 'Valide au', 'awed.dxccFilter': 'Filtre DXCC', 'awed.validBands': 'Bandes valides (vide = toutes)', 'awed.emission': 'Émission (vide = toutes)', 'awed.validModes': 'Modes valides (vide = tous)', 'awed.awardType': 'Type de diplôme', 'awed.dynamicRefs': 'Références dynamiques (non prédéfinies — toute valeur compte, comme POTA)', 'awed.qsoParams': 'Paramètres QSO (utilisés par les types QSOFIELDS / REFERENCE)', 'awed.searchInField': 'Chercher dans le champ', 'awed.matchBy': 'Correspondance par', 'awed.exactMatch': 'Correspondance exacte (sinon cherche la référence dans le champ)', 'awed.patternRegex': 'Motif (regex)', 'awed.patternPlaceholder': 'groupe 1 = référence (pour correspondance par motif / dynamique)', 'awed.leadingString': 'Chaîne de début', 'awed.trailingString': 'Chaîne de fin', 'awed.additionalSearches': 'Recherches de repli', 'awed.orAlsoMatch': "— essayées dans l'ordre, seulement si rien n'a encore été trouvé ; la première qui marche gagne", 'awed.addOr': 'Ajouter OU', 'awed.orSearchIn': 'OU — chercher dans', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Supprimer cette recherche OU', 'awed.orPatternPlaceholder': 'regex — groupe 1 = référence (ex. \\b(\\d{2})\\d{3}\\b pour code postal → dépt)', 'awed.prefixPlaceholder': 'préfixe (D)', 'awed.prefixTitle': 'Ajouté devant chaque référence trouvée, ex. 74 → D74', 'awed.confirmationLabel': 'Confirmation (contacté → confirmé)', 'awed.validationLabel': 'Validation (confirmé → validé)', 'awed.resetDefaults': 'Réinitialiser par défaut', 'awed.exportTitle': 'Exporter toutes les définitions de diplômes + listes de références vers une sauvegarde JSON', 'awed.export': 'Exporter…', 'awed.importTitle': 'Importer un lot de diplômes (définitions + listes de références)', 'awed.import': 'Importer…', 'awed.cancel': 'Annuler', 'awed.save': 'Enregistrer', 'awed.populatedMsg': '{n} références intégrées ajoutées.', 'awed.newRefCodePrompt': 'Nouveau code de référence :', 'awed.importedRefsMsg': '{n} références importées.', 'awed.referenceCount': 'Nombre de références :', 'awed.applyPreset': 'Appliquer un préréglage…', 'awed.pasteCsv': 'Coller / CSV', 'awed.populateBuiltinTitle': 'Remplacer par la liste intégrée fournie (entités DXCC, départements français, …)', 'awed.populateBuiltin': "Charger l'intégrée", 'awed.updateOnline': 'Mettre à jour en ligne', 'awed.add': 'Ajouter', 'awed.onePerLine': 'Une référence par ligne :', 'awed.replacesList': '(virgule/point-virgule/tab). Remplace toute la liste.', 'awed.import2': 'Importer', 'awed.search': 'Rechercher…', 'awed.searching': 'Recherche…', 'awed.tooManyItems': "Trop d'éléments ({total}). Affine la recherche (tape 2+ caractères).", 'awed.noReferences': 'Aucune référence.', 'awed.selectReference': 'Sélectionne une référence, ou Ajouter / importer une liste.', 'awed.group': 'Groupe', 'awed.subgroup': 'Sous-groupe', 'awed.perRefRegex': 'regex optionnelle par référence', 'awed.grid': 'Locator', 'awed.saveReference': 'Enregistrer la référence',
+  'awed.addCountry': 'Ajouter un pays…', 'awed.exportedTo': 'Diplômes exportés vers :\n{path}', 'awed.importedMsg': '{awards} diplôme(s) et {references} référence(s) importés.', 'awed.awardManagement': 'Gestion des diplômes', 'awed.searchAwards': 'Rechercher un diplôme…', 'awed.newAward': 'Nouveau diplôme', 'awed.clickToDismiss': 'Cliquer pour fermer', 'awed.selectOrCreate': 'Sélectionne ou crée un diplôme.', 'awed.tabInfo': 'Infos diplôme', 'awed.tabType': 'Type de diplôme', 'awed.tabConfirmation': 'Confirmation', 'awed.tabReferences': 'Références', 'awed.awardName': 'Nom du diplôme', 'awed.valid': 'Valide', 'awed.deleteAward': 'Supprimer le diplôme', 'awed.description': 'Description', 'awed.awardUrl': 'URL du diplôme', 'awed.refDisplay': 'La colonne affiche', 'awed.refDisplayRef': 'Référence', 'awed.refDisplayName': 'Description / nom', 'awed.refDisplayBoth': 'Les deux (réf — nom)', 'awed.referenceUrl': 'URL de référence', 'awed.validFrom': 'Valide du', 'awed.validTo': 'Valide au', 'awed.dxccFilter': 'Filtre DXCC', 'awed.validBands': 'Bandes valides (vide = toutes)', 'awed.emission': 'Émission (vide = toutes)', 'awed.validModes': 'Modes valides (vide = tous)', 'awed.awardType': 'Type de diplôme', 'awed.dynamicRefs': 'Références dynamiques (non prédéfinies — toute valeur compte, comme POTA)', 'awed.qsoParams': 'Paramètres QSO (utilisés par les types QSOFIELDS / REFERENCE)', 'awed.searchInField': 'Chercher dans le champ', 'awed.matchBy': 'Correspondance par', 'awed.exactMatch': 'Correspondance exacte (sinon cherche la référence dans le champ)', 'awed.oneRef': 'Une seule référence par QSO', 'awed.oneRefHint': 'Quand plusieurs références correspondent au même contact, n'+'’en affecter aucune et le lister dans les références manquantes. Pour les diplômes où deux entrées partagent une description — deux DOK nommés Gießen — en choisir une au hasard inscrirait la mauvaise dans le journal.', 'awed.patternRegex': 'Motif (regex)', 'awed.patternPlaceholder': 'groupe 1 = référence (pour correspondance par motif / dynamique)', 'awed.leadingString': 'Chaîne de début', 'awed.trailingString': 'Chaîne de fin', 'awed.additionalSearches': 'Recherches de repli', 'awed.orAlsoMatch': "— essayées dans l'ordre, seulement si rien n'a encore été trouvé ; la première qui marche gagne", 'awed.addOr': 'Ajouter OU', 'awed.orSearchIn': 'OU — chercher dans', 'awed.exact': 'exact', 'awed.removeOrSearch': 'Supprimer cette recherche OU', 'awed.orPatternPlaceholder': 'regex — groupe 1 = référence (ex. \\b(\\d{2})\\d{3}\\b pour code postal → dépt)', 'awed.prefixPlaceholder': 'préfixe (D)', 'awed.prefixTitle': 'Ajouté devant chaque référence trouvée, ex. 74 → D74', 'awed.confirmationLabel': 'Confirmation (contacté → confirmé)', 'awed.validationLabel': 'Validation (confirmé → validé)', 'awed.resetDefaults': 'Réinitialiser par défaut', 'awed.exportTitle': 'Exporter toutes les définitions de diplômes + listes de références vers une sauvegarde JSON', 'awed.export': 'Exporter…', 'awed.importTitle': 'Importer un lot de diplômes (définitions + listes de références)', 'awed.import': 'Importer…', 'awed.cancel': 'Annuler', 'awed.save': 'Enregistrer', 'awed.populatedMsg': '{n} références intégrées ajoutées.', 'awed.newRefCodePrompt': 'Nouveau code de référence :', 'awed.importedRefsMsg': '{n} références importées.', 'awed.referenceCount': 'Nombre de références :', 'awed.applyPreset': 'Appliquer un préréglage…', 'awed.pasteCsv': 'Coller / CSV', 'awed.populateBuiltinTitle': 'Remplacer par la liste intégrée fournie (entités DXCC, départements français, …)', 'awed.populateBuiltin': "Charger l'intégrée", 'awed.updateOnline': 'Mettre à jour en ligne', 'awed.add': 'Ajouter', 'awed.onePerLine': 'Une référence par ligne :', 'awed.replacesList': '(virgule/point-virgule/tab). Remplace toute la liste.', 'awed.import2': 'Importer', 'awed.search': 'Rechercher…', 'awed.searching': 'Recherche…', 'awed.tooManyItems': "Trop d'éléments ({total}). Affine la recherche (tape 2+ caractères).", 'awed.noReferences': 'Aucune référence.', 'awed.selectReference': 'Sélectionne une référence, ou Ajouter / importer une liste.', 'awed.group': 'Groupe', 'awed.subgroup': 'Sous-groupe', 'awed.perRefRegex': 'regex optionnelle par référence', 'awed.grid': 'Locator', 'awed.saveReference': 'Enregistrer la référence',
   'awed.updateAvailable': 'Une nouvelle version de ce diplôme est disponible', 'awed.updateOverwrites': "Tu as modifié ce diplôme, la mise à jour n'a donc pas été appliquée. L'accepter remplacera ta définition et ta liste de références.", 'awed.updateApply': 'Mettre à jour', 'awed.updateKeepMine': 'Garder les miennes',
-  'awed.tabTest': 'Test', 'awed.testCallsign': 'Tester avec un indicatif', 'awed.testRun': 'Tester', 'awed.testSavedOnly': 'Teste le diplôme ENREGISTRÉ — enregistre tes modifications avant.', 'awed.testNoMatch': 'aucune correspondance', 'awed.testOutOfScope': "QSO hors périmètre — aucune règle n'a été exécutée.", 'awed.testSkipped': "non exécutée : une règle précédente a déjà trouvé", 'awed.testFieldValue': 'Champ', 'awed.testEmptyField': 'vide', 'awed.testNoCandidate': "n'a produit aucun candidat", 'awed.testManual': 'Référence forcée à la main', 'awed.testSameAs': '+{n} autre(s) QSO, même résultat',
+  'awed.tabTest': 'Test', 'awed.testCallsign': 'Tester avec un indicatif', 'awed.testRun': 'Tester', 'awed.testSavedOnly': 'Teste le diplôme ENREGISTRÉ — enregistre tes modifications avant.', 'awed.testNoMatch': 'aucune correspondance', 'awed.testOutOfScope': "QSO hors périmètre — aucune règle n'a été exécutée.", 'awed.testSkipped': "non exécutée : une règle précédente a déjà trouvé", 'awed.testFieldValue': 'Champ', 'awed.testEmptyField': 'vide', 'awed.testNoCandidate': "n'a produit aucun candidat", 'awed.testManual': 'Référence forcée à la main', 'awed.testAmbiguous': 'Ambigu', 'awed.testAmbiguousHint': '— aucune retenue, ce diplôme n’admet qu’une référence par QSO. Affectez la bonne à la main.', 'awed.testSameAs': '+{n} autre(s) QSO, même résultat',
   'awed.exportOne': 'Partager {code}',
   'awed.onlyHere': 'local',
   'awed.onlyHereTip': 'À toi — non livré avec OpsLog. Son JSON est tenu à jour dans le dossier awards ; envoie ce fichier pour le partager.',

frontend/src/lib/uiPref.ts

@@ -36,6 +36,7 @@ const PORTABLE_KEYS = [
   'opslog.clusterLockBand', 'opslog.clusterLockMode', 'opslog.clusterStatusFilter',
   'opslog.clusterModeFilter', 'opslog.clusterSearch', 'opslog.clusterHideWorked',
   'opslog.activeTab',     // last selected tab
+  'opslog.mainSplit',    // Main tab: width share of the left pane (percent)
   // NOTE: 'hamlog.awardColsShown' and the grid column layouts are NOT listed here.
   // They are handled by lib/gridPrefs, which scopes the localStorage cache PER
   // PROFILE and mirrors to the DB (already per-profile) itself — mirroring them

frontend/src/style.css

@@ -679,10 +679,10 @@
    disappears on the dark themes. Invert it there — the control itself is worth
    keeping (OS calendar, locale date order, keyboard entry), only its icon needs
    help. */
-[data-theme='dim-slate'] input[type='date']::-webkit-calendar-picker-indicator,
-[data-theme='dark-warm'] input[type='date']::-webkit-calendar-picker-indicator,
-[data-theme='dark-graphite'] input[type='date']::-webkit-calendar-picker-indicator,
-[data-theme='high-contrast'] input[type='date']::-webkit-calendar-picker-indicator {
-  filter: invert(1) brightness(1.6);
-  opacity: 0.75;
+   Every temporal input carries the same glyph, so the rule names them all:
+   datetime-local was left out at first and its icon stayed invisible. */
+:is([data-theme='dim-slate'], [data-theme='dark-warm'], [data-theme='dark-graphite'], [data-theme='high-contrast'])
+  :is(input[type='date'], input[type='datetime-local'], input[type='time'], input[type='month'], input[type='week'])::-webkit-calendar-picker-indicator {
+  filter: invert(1) brightness(1.8);
+  opacity: 0.9;
 }

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.22.6';
+export const APP_VERSION = '0.22.8';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -605,6 +605,8 @@ export function ImportAwards():Promise<main.AwardImportResult>;
 
 export function InspectAwardImport():Promise<main.AwardImportPreview>;
 
+export function IsNewUSCounty(arg1:string,arg2:string):Promise<boolean>;
+
 export function LaunchAutostartProgram(arg1:string):Promise<main.AutostartLaunchResult>;
 
 export function LaunchAutostartPrograms():Promise<Array<main.AutostartLaunchResult>>;

frontend/wailsjs/go/main/App.js

@@ -1158,6 +1158,10 @@ export function InspectAwardImport() {
   return window['go']['main']['App']['InspectAwardImport']();
 }
 
+export function IsNewUSCounty(arg1, arg2) {
+  return window['go']['main']['App']['IsNewUSCounty'](arg1, arg2);
+}
+
 export function LaunchAutostartProgram(arg1) {
   return window['go']['main']['App']['LaunchAutostartProgram'](arg1);
 }

frontend/wailsjs/go/models.ts

@@ -316,6 +316,7 @@ export namespace award {
 	    leading_str?: string;
 	    trailing_str?: string;
 	    dynamic?: boolean;
+	    one_ref_per_qso?: boolean;
 	    or_rules?: OrRule[];
 	    dxcc_filter: number[];
 	    valid_bands?: string[];
@@ -356,6 +357,7 @@ export namespace award {
 	        this.leading_str = source["leading_str"];
 	        this.trailing_str = source["trailing_str"];
 	        this.dynamic = source["dynamic"];
+	        this.one_ref_per_qso = source["one_ref_per_qso"];
 	        this.or_rules = this.convertValues(source["or_rules"], OrRule);
 	        this.dxcc_filter = source["dxcc_filter"];
 	        this.valid_bands = source["valid_bands"];
@@ -461,6 +463,8 @@ export namespace award {
 	    ref_count: number;
 	    steps: Step[];
 	    manual?: string[];
+	    superseded?: string[];
+	    ambiguous?: string[];
 	    result: string[];
 	
 	    static createFrom(source: any = {}) {
@@ -476,6 +480,8 @@ export namespace award {
 	        this.ref_count = source["ref_count"];
 	        this.steps = this.convertValues(source["steps"], Step);
 	        this.manual = source["manual"];
+	        this.superseded = source["superseded"];
+	        this.ambiguous = source["ambiguous"];
 	        this.result = source["result"];
 	    }
 	
@@ -1912,6 +1918,7 @@ export namespace main {
 	    xiegu_port: string;
 	    xiegu_baud: number;
 	    xiegu_addr: number;
+	    xiegu_ptt_line: string;
 	    yaesu_port: string;
 	    yaesu_baud: number;
 	    kenwood_host: string;
@@ -1951,6 +1958,7 @@ export namespace main {
 	        this.xiegu_port = source["xiegu_port"];
 	        this.xiegu_baud = source["xiegu_baud"];
 	        this.xiegu_addr = source["xiegu_addr"];
+	        this.xiegu_ptt_line = source["xiegu_ptt_line"];
 	        this.yaesu_port = source["yaesu_port"];
 	        this.yaesu_baud = source["yaesu_baud"];
 	        this.kenwood_host = source["kenwood_host"];
@@ -2700,6 +2708,7 @@ export namespace main {
 	    ref: string;
 	    name?: string;
 	    pickable: boolean;
+	    ambiguous?: boolean;
 	
 	    static createFrom(source: any = {}) {
 	        return new QSOAwardRef(source);
@@ -2711,6 +2720,7 @@ export namespace main {
 	        this.ref = source["ref"];
 	        this.name = source["name"];
 	        this.pickable = source["pickable"];
+	        this.ambiguous = source["ambiguous"];
 	    }
 	}
 	export class QSORate {

internal/award/award.go

@@ -75,10 +75,22 @@ type Def struct {
 	LeadingStr  string    `json:"leading_str,omitempty"`  // strip this prefix before matching
 	TrailingStr string    `json:"trailing_str,omitempty"` // strip this suffix before matching
 	Dynamic     bool      `json:"dynamic,omitempty"`      // references not predefined (any value counts)
-	// NOTE: there is no "one reference per QSO" switch, and there was never any
-	// point in one. A QSO ALWAYS yields every reference its field holds — an n-fer
-	// POTA activation ("US-6544,US-0680"), a VUCC contact on a grid line. The old
-	// `Multi` flag was read by nothing; its checkbox changed nothing.
+	// OneRefPerQSO refuses an AMBIGUOUS match rather than guessing.
+	//
+	// This is not the old `Multi` flag, which was removed for good reason: a QSO
+	// always yields every reference its FIELD holds — an n-fer POTA activation
+	// ("US-6544,US-0680"), a VUCC contact on a grid line. That is several
+	// references, correctly.
+	//
+	// The case here is the opposite. The field holds ONE value and two entries in
+	// the reference list carry it: two German DOKs are both called "Gießen",
+	// because two clubs share the town. The matcher is not wrong, the data is
+	// ambiguous — and picking one would write a reference into the log that may
+	// well be the other. So on an award where a QSO can only ever count for one
+	// reference, an ambiguous match assigns NONE and the contact appears under
+	// "missing references", where the operator picks. Their choice then sticks:
+	// a manual reference overrides the matcher.
+	OneRefPerQSO bool `json:"one_ref_per_qso,omitempty"`
 
 	// OrRules are ordered FALLBACK searches for the primary one above: they are
 	// tried IN ORDER and only while nothing has matched yet — the first rule that
@@ -859,7 +871,15 @@ type Explanation struct {
 	RefCount   int      `json:"ref_count"`             // size of that list
 	Steps      []Step   `json:"steps"`
 	Manual     []string `json:"manual,omitempty"` // references the operator assigned by hand
-	Result     []string `json:"result"`           // what the QSO finally counts for
+	// Superseded is what the matcher had found before the operator's choice
+	// replaced it — shown in the trace so a correction is explainable rather
+	// than mysterious.
+	Superseded []string `json:"superseded,omitempty"`
+	// Ambiguous lists the references that matched when the award allows only one
+	// — none of them was kept. Shown so the operator sees WHICH ones to choose
+	// between rather than an unexplained blank.
+	Ambiguous []string `json:"ambiguous,omitempty"`
+	Result    []string `json:"result"` // what the QSO finally counts for
 }
 
 // Explain runs the matcher on a single QSO and reports what it did. It goes
@@ -977,8 +997,31 @@ func candidatesTrace(d *Def, re *regexp.Regexp, q *qso.QSO, rl refList, hasList
 	if ex != nil {
 		ex.Manual = manual
 	}
-	found = append(found, manual...)
+	// An operator's choice REPLACES what the matcher found. It does not join it.
+	//
+	// Adding to it was the behaviour, and it made a correction impossible: a
+	// German address matching two or three DOKs kept them all, so deleting the
+	// wrong ones and assigning the right one lasted exactly until the next
+	// recompute, which put them straight back. The operator was arguing with
+	// the matcher and could not win.
+	//
+	// One manual entry is stored per award (setOverrideRef drops the previous
+	// one), so this is an override in the storage as well as in the name.
+	if len(manual) > 0 {
+		if ex != nil {
+			ex.Superseded = dedupe(found)
+		}
+		found = manual
+	}
 	out := dedupe(found)
+	// Ambiguity is not a result. See OneRefPerQSO.
+	if d.OneRefPerQSO && len(manual) == 0 && len(out) > 1 {
+		if ex != nil {
+			ex.Ambiguous = out
+			ex.Result = []string{}
+		}
+		return nil
+	}
 	if ex != nil {
 		ex.Result = out
 	}

internal/award/catalog/dld.json

@@ -12,11 +12,14 @@
     "type": "QSOFIELDS",
     "field": "address",
     "match_by": "description",
+    "exact_match": true,
     "pattern": "",
+    "one_ref_per_qso": true,
     "or_rules": [
       {
         "field": "qth",
-        "match_by": "description"
+        "match_by": "description",
+        "exact_match": true
       }
     ],
     "dxcc_filter": [
@@ -34,7 +37,7 @@
     ],
     "total": 0,
     "builtin": true,
-    "version": 1
+    "version": 2
   },
   "references": [
     {

internal/award/override_test.go

@@ -0,0 +1,100 @@
+package award
+
+import (
+	"strings"
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// An operator's correction must survive a recompute.
+//
+// Reported on the DARC DOK award: a German address matches two or three DOKs,
+// the operator deletes the wrong ones and assigns the right one, and the next
+// recompute puts the wrong ones straight back. The manual reference was being
+// ADDED to what the matcher found instead of replacing it, so the correction
+// could never win.
+func TestManualReferenceReplacesTheMatch(t *testing.T) {
+	// An award that reads the address and matches a reference's description —
+	// the shape the DOK award uses, and the shape that over-matches.
+	def := Def{
+		Code: "DLD", Name: "DARC DOK", Field: "address",
+		MatchBy: "description", Type: "QSOFIELDS", Valid: true,
+	}
+	metas := []RefMeta{
+		{Code: "A01", Name: "Berlin", Valid: true},
+		{Code: "B05", Name: "Berlin Mitte", Valid: true},
+	}
+	// An address that legitimately matches both.
+	q := &qso.QSO{
+		Callsign: "DL2FDM",
+		Address:  "Berlin Mitte, 10115 Berlin",
+	}
+
+	auto := Explain(def, metas, q)
+	if len(auto.Result) < 2 {
+		t.Fatalf("the test needs an over-matching case; got %v", auto.Result)
+	}
+
+	// The operator picks the right one.
+	q.Extras = map[string]string{ManualRefsKey: "DLD@B05"}
+	fixed := Explain(def, metas, q)
+
+	if got := strings.Join(fixed.Result, ","); got != "B05" {
+		t.Errorf("after the correction the QSO counts for %q — want B05 alone", got)
+	}
+	if len(fixed.Superseded) == 0 {
+		t.Error("the trace does not say what the correction replaced")
+	}
+
+	// A QSO with no correction still gets everything the matcher found: the
+	// override must not disable matching for everyone else.
+	q2 := &qso.QSO{Callsign: "DL3XYZ", Address: "Berlin Mitte, 10115 Berlin"}
+	if len(Explain(def, metas, q2).Result) < 2 {
+		t.Error("an untouched QSO lost its automatic references")
+	}
+}
+
+// On an award where a QSO can only count for ONE reference, an ambiguous match
+// assigns none.
+//
+// Two DARC DOKs are called "Gießen" because two clubs share the town. Exact
+// matching finds both, and both are right as far as the matcher can tell.
+// Picking one would write a reference into the log that may well be the other —
+// so the contact is left for the operator, who now has the last word.
+func TestAmbiguousMatchIsRefusedWhenOnlyOneReferenceIsAllowed(t *testing.T) {
+	def := Def{
+		Code: "DLD", Name: "DARC DOK", Field: "qth",
+		MatchBy: "description", ExactMatch: true, Type: "QSOFIELDS", Valid: true,
+		OneRefPerQSO: true,
+	}
+	metas := []RefMeta{
+		{Code: "F07", Name: "Gießen", Valid: true},
+		{Code: "F61", Name: "Gießen", Valid: true},
+		{Code: "B11", Name: "Kassel", Valid: true},
+	}
+
+	amb := Explain(def, metas, &qso.QSO{Callsign: "DL2FDM", QTH: "Gießen"})
+	if len(amb.Result) != 0 {
+		t.Errorf("an ambiguous match produced %v — it should produce nothing", amb.Result)
+	}
+	if len(amb.Ambiguous) != 2 {
+		t.Errorf("the trace lists %v — it should name both candidates", amb.Ambiguous)
+	}
+
+	// An unambiguous one is untouched: this must not make the award stricter in
+	// general, only where the data genuinely does not decide.
+	ok := Explain(def, metas, &qso.QSO{Callsign: "DL3XYZ", QTH: "Kassel"})
+	if len(ok.Result) != 1 || ok.Result[0] != "B11" {
+		t.Errorf("an unambiguous QSO gave %v — want B11", ok.Result)
+	}
+
+	// And the operator's choice still wins over the ambiguity.
+	fixed := Explain(def, metas, &qso.QSO{
+		Callsign: "DL2FDM", QTH: "Gießen",
+		Extras: map[string]string{ManualRefsKey: "DLD@F61"},
+	})
+	if len(fixed.Result) != 1 || fixed.Result[0] != "F61" {
+		t.Errorf("after the operator picked F61 the QSO counts for %v", fixed.Result)
+	}
+}

internal/cat/kenwood.go

@@ -29,6 +29,7 @@ package cat
 // from the radio, and the rig file decides what a "Freq" property means.
 
 import (
+	"bytes"
 	"errors"
 	"fmt"
 	"net"
@@ -71,6 +72,31 @@ type Kenwood struct {
 	curVFO    string // "A" or "B"
 	// Commands this rig answered "?;" to — asked once, then never again.
 	unsupported map[string]bool
+
+	// rx holds bytes read but not yet consumed, ACROSS calls to ask.
+	//
+	// It has to survive: a rig answers faster than we ask, so one Read often
+	// returns a whole reply plus the start of the next frame. When this buffer
+	// was local to ask, everything after the matched frame was dropped — half a
+	// frame included — and the link desynchronised permanently: every ask then
+	// found the PREVIOUS command's answer and timed out waiting for its own.
+	// That is the "discarding \" 000000000010000000;\" while waiting for IF"
+	// a TS-480 reported, followed by connected=false for ever.
+	rx []byte
+
+	// heard is whatever arrived during Connect that was not a reply we wanted.
+	// Kept only to put it in the error message: "not answering" and "answering
+	// something unreadable" are different faults with different fixes.
+	heard string
+}
+
+// where names the link for a message, so an error does not read "COM @ 0 baud"
+// after a network connect.
+func (k *Kenwood) where() string {
+	if k.host != "" {
+		return k.host
+	}
+	return k.portName
 }
 
 // NewKenwoodTCP builds a backend that reaches the rig over a socket instead of
@@ -122,6 +148,14 @@ func (k *Kenwood) Connect() error {
 	// request/response pairs and make a reply impossible to attribute. We poll.
 	_ = k.write("AI0;")
 
+	// Start from silence. A reconnect inherits whatever the rig said last —
+	// unsolicited frames sent before AI0 landed, the tail of an answer nobody
+	// read — and one stale frame is enough to leave every ask one reply behind
+	// its question for the rest of the session.
+	k.rx = nil
+	k.drain(250 * time.Millisecond)
+	k.heard = ""
+
 	answered := false
 	if id, err := k.ask("ID;"); err == nil && strings.HasPrefix(id, "ID") {
 		answered = true
@@ -140,10 +174,22 @@ func (k *Kenwood) Connect() error {
 	}
 	if !answered {
 		k.model = ""
-		if k.host != "" {
-			return fmt.Errorf("kenwood: %s accepted the connection but the rig is not answering — check that the serial bridge points at the radio and that the radio is switched on", k.host)
+		if k.heard == "" && len(k.rx) > 0 {
+			k.heard = string(k.rx) // an unterminated fragment is evidence too
 		}
-		return fmt.Errorf("kenwood: %s opened but the rig is not answering — check that it is switched on and set to %d baud", k.portName, k.baud)
+		// Distinguish silence from noise. "The rig is not answering" sent an
+		// operator checking the power switch and the baud rate on a radio that was
+		// visibly talking — its frames were arriving, they just did not match what
+		// was asked (wrong baud garbles them; an interface echoing our own
+		// commands back produces the same). Say which of the two it is, and quote
+		// what came back, because that is the fact that decides where to look.
+		if seen := k.heard; seen != "" {
+			return fmt.Errorf("kenwood: %s is sending data but no reply to ID; or IF; — got %q. Check the baud rate (set to %d here) and that nothing else is echoing the port", k.where(), seen, k.baud)
+		}
+		if k.host != "" {
+			return fmt.Errorf("kenwood: %s accepted the connection but the rig sent nothing — check that the serial bridge points at the radio and that the radio is switched on", k.host)
+		}
+		return fmt.Errorf("kenwood: %s opened but the rig sent nothing — check that it is switched on and set to %d baud", k.portName, k.baud)
 	}
 	// Name what was actually connected to. A log reading "connected on  @ 0 baud"
 	// after a network connect is the kind of line that sends someone hunting a
@@ -300,6 +346,23 @@ func (k *Kenwood) write(cmd string) error {
 	return err
 }
 
+// drain reads and throws away whatever the rig has already sent, until it stays
+// quiet for one read timeout or the budget runs out.
+func (k *Kenwood) drain(budget time.Duration) {
+	if k.port == nil {
+		return
+	}
+	tmp := make([]byte, 256)
+	deadline := time.Now().Add(budget)
+	for time.Now().Before(deadline) {
+		n, err := k.port.Read(tmp)
+		if err != nil || n == 0 {
+			return // an error here is not interesting: we are throwing this away
+		}
+		traceText("kenwood", "RX-drop", string(tmp[:n]))
+	}
+}
+
 // ask sends a query and returns the reply belonging to THAT command. Anything
 // else on the wire is discarded: a stray frame parsed as a frequency reads as
 // "lost the rig" to the Manager, which then reconnects — the CAT link dropping
@@ -312,25 +375,18 @@ func (k *Kenwood) ask(cmd string) (string, error) {
 	if err := k.write(cmd); err != nil {
 		return "", err
 	}
-	buf := make([]byte, 0, 64)
 	tmp := make([]byte, 64)
 	deadline := time.Now().Add(600 * time.Millisecond)
-	for time.Now().Before(deadline) {
-		n, err := k.port.Read(tmp)
-		if err != nil {
-			return "", err
-		}
-		if n == 0 {
-			continue // read timeout — the rig may still be composing its answer
-		}
-		buf = append(buf, tmp[:n]...)
+	for {
+		// Consume whatever is already buffered BEFORE reading more: the answer
+		// may have arrived attached to the previous one.
 		for {
-			i := strings.IndexByte(string(buf), ';')
+			i := bytes.IndexByte(k.rx, ';')
 			if i < 0 {
 				break
 			}
-			frame := string(buf[:i+1])
-			buf = buf[i+1:]
+			frame := string(k.rx[:i+1])
+			k.rx = k.rx[i+1:]
 			traceText("kenwood", "RX", frame)
 			if frame == "?;" {
 				// The rig rejected the command. Remember it so the poll loop stops
@@ -343,9 +399,25 @@ func (k *Kenwood) ask(cmd string) (string, error) {
 				return frame, nil
 			}
 			debugLog.Printf("kenwood: discarding %q while waiting for %s", frame, want)
+			// Remember the first unexpected frame: if the whole handshake fails, this
+			// is what tells the operator the radio was talking after all.
+			if k.heard == "" {
+				k.heard = frame
+			}
 		}
+		if !time.Now().Before(deadline) {
+			return "", fmt.Errorf("kenwood: timeout answering %q", cmd)
+		}
+		n, err := k.port.Read(tmp)
+		if err != nil {
+			return "", err
+		}
+		if n > 0 {
+			k.rx = append(k.rx, tmp[:n]...)
+		}
+		// n == 0 is a read timeout, not silence for good: the rig may still be
+		// composing its answer.
 	}
-	return "", fmt.Errorf("kenwood: timeout answering %q", cmd)
 }
 
 // ── Frame parsing ──────────────────────────────────────────────────────────
@@ -475,6 +547,10 @@ var kenwoodModels = map[string]string{
 	"019": "TS-2000",
 	"020": "TS-480",
 	"021": "TS-590S",
+	// 022 reported by a real TS-990S in the field. Kenwood's documentation gives
+	// 024 for that radio, so both are kept: the observed value wins where they
+	// disagree, and neither maps to anything else.
+	"022": "TS-990S",
 	"023": "TS-590SG",
 	"024": "TS-990S",
 	"025": "TS-890S",
@@ -492,7 +568,23 @@ func (k *Kenwood) openPort() (serial.Port, error) {
 		}
 		return &tcpSerial{conn: c}, nil
 	}
-	return serial.Open(k.portName, &serial.Mode{BaudRate: k.baud})
+	p, err := serial.Open(k.portName, &serial.Mode{BaudRate: k.baud})
+	if err != nil {
+		return nil, err
+	}
+	// The modem lines are LEFT ALONE.
+	//
+	// They were briefly deasserted here, to stop an interface that reads them as
+	// PTT from keying the rig on connect. That silenced radios instead: a TS-990
+	// on COM3 opened fine and answered nothing, because a great many USB-serial
+	// interfaces will not transmit with RTS low — hardware flow control, or an
+	// output stage the line enables. "Opened but the rig sent nothing" was this,
+	// and it arrived as "CAT stopped working after the update".
+	//
+	// The fault that change was written for was a Xiegu G90 behind a DE-19, and
+	// that backend now has an explicit setting for which line keys it. A rig
+	// whose PTT is a CAT command has no business touching DTR or RTS at all.
+	return p, nil
 }
 
 // tcpSerial presents a TCP connection as a serial.Port, so the backend has one

internal/cat/kenwood_loopback_test.go

@@ -265,8 +265,8 @@ func TestKenwoodSilentRigIsNotConnected(t *testing.T) {
 	if err == nil {
 		t.Fatal("a silent port was reported as a connected rig")
 	}
-	if !strings.Contains(err.Error(), "not answering") {
-		t.Errorf("error was %q — it should say the rig is not answering", err)
+	if !strings.Contains(err.Error(), "sent nothing") {
+		t.Errorf("error was %q — a silent port should be reported as silence", err)
 	}
 	if k.model != "" {
 		t.Errorf("a stale model survived a failed connect: %q", k.model)
@@ -355,3 +355,26 @@ func TestKenwoodSplitWhenFRFTRejected(t *testing.T) {
 		t.Errorf("IF-reported split broke: split=%v tx=%d rx=%d", s.Split, s.FreqHz, s.RxFreqHz)
 	}
 }
+
+// A rig that talks but never answers what was asked must not be reported as a
+// silent one.
+//
+// The two faults need opposite responses: silence means the radio is off, the
+// wrong port, or a dead cable; noise means the baud rate is wrong or something
+// is echoing the line. "The rig is not answering" sent an operator checking the
+// power switch on a radio whose frames were visibly arriving.
+func TestKenwoodNoisyRigIsReportedAsNoiseNotSilence(t *testing.T) {
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = func() (serial.Port, error) {
+		return &fakeSerial{toRig: &strings.Builder{}, answer: func(cmd string) string {
+			return "XX9999;" // something, but never the reply to ID; or IF;
+		}}, nil
+	}
+	err := k.Connect()
+	if err == nil {
+		t.Fatal("a rig answering gibberish was reported as connected")
+	}
+	if !strings.Contains(err.Error(), "sending data") || !strings.Contains(err.Error(), "XX9999;") {
+		t.Errorf("error was %q — it should say data arrived, and quote it", err)
+	}
+}

internal/cat/xiegu.go

@@ -56,6 +56,9 @@ type Xiegu struct {
 	// asking every cycle — a Xiegu that has no split must not cost a timeout per
 	// poll, which would slow the whole loop to a crawl.
 	splitSupported bool
+	// pttLine is "", "rts" or "dtr": which hardware line keys the rig, when the
+	// CI-V command does not.
+	pttLine string
 }
 
 func NewXiegu(portName string, baud int, addr int, digital string) *Xiegu {
@@ -74,6 +77,14 @@ func NewXiegu(portName string, baud int, addr int, digital string) *Xiegu {
 	}
 }
 
+// SetPTTLine selects the hardware line that keys this rig: "rts", "dtr", or ""
+// for the CI-V command. Set before Connect.
+func (x *Xiegu) SetPTTLine(line string) {
+	x.mu.Lock()
+	x.pttLine = strings.ToLower(strings.TrimSpace(line))
+	x.mu.Unlock()
+}
+
 func (x *Xiegu) Name() string { return "xiegu" }
 
 func (x *Xiegu) Connect() error {
@@ -87,6 +98,20 @@ func (x *Xiegu) Connect() error {
 		return fmt.Errorf("xiegu: open %s @ %d baud: %w", x.portName, x.baud, err)
 	}
 	p.SetReadTimeout(200 * time.Millisecond)
+	// Deassert DTR and RTS.
+	//
+	// Windows raises both when a serial port is opened, and a great many
+	// interfaces read them as PTT: a Xiegu G90 behind a DE-19 goes into
+	// transmit the moment OpsLog connects and STAYS there — Xiegu's own
+	// documentation asks for RTS and DTR low. The same applies to an Icom with
+	// USB SEND mapped to a line (which is why the CI-V backend has done this
+	// from the start) and to any rig keyed by a home-made cable.
+	//
+	// PTT on this backend is a CAT command, so neither line should ever be
+	// asserted here. A station keying by RTS/DTR configures that separately,
+	// on its own port.
+	_ = p.SetDTR(false)
+	_ = p.SetRTS(false)
 	x.port = p
 	x.splitSupported = true
 
@@ -177,12 +202,25 @@ func (x *Xiegu) SetMode(mode string) error {
 	return x.send(civ.CmdSetMode, m)
 }
 
+// SetPTT keys the transmitter, by CI-V or by a hardware line.
+//
+// A G90 does not transmit on the CI-V PTT command. Xiegu's own interfaces key
+// on RTS or DTR instead — the DE-19 does exactly that — which is why the line
+// can be selected here. Without it, WSJT-X talking to OpsLog's rigctld server
+// decoded perfectly and never transmitted: the command left, the radio ignored
+// it, and nothing in the chain was wrong enough to complain.
 func (x *Xiegu) SetPTT(on bool) error {
 	x.mu.Lock()
 	defer x.mu.Unlock()
 	if x.port == nil {
 		return fmt.Errorf("xiegu: not connected")
 	}
+	switch x.pttLine {
+	case "rts":
+		return x.port.SetRTS(on)
+	case "dtr":
+		return x.port.SetDTR(on)
+	}
 	v := byte(0x00)
 	if on {
 		v = 0x01

internal/cat/yaesu.go

@@ -150,6 +150,12 @@ func (y *Yaesu) Connect() error {
 	if err != nil {
 		return fmt.Errorf("yaesu: open %s @ %d baud: %w", y.portName, y.baud, err)
 	}
+	// The modem lines are LEFT ALONE — see the same note in kenwood.go.
+	//
+	// Deasserting them to keep an interface from keying the rig silenced radios
+	// instead: many USB-serial interfaces will not transmit with RTS low. The
+	// Xiegu fault that change was written for is handled in that backend, which
+	// now has an explicit setting for which line keys the rig.
 	p.SetReadTimeout(300 * time.Millisecond)
 	y.port = p
 

internal/qso/qso.go

@@ -2061,6 +2061,41 @@ func (r *Repo) WorkedCountyKeys(ctx context.Context, keyFn func(state, cnty stri
 	return out, rows.Err()
 }
 
+// CountyWorked reports whether one US county has already been worked.
+//
+// It exists so the entry panel can flag a new county without loading the whole
+// worked-county set on every keystroke — the county arrives from a QRZ lookup,
+// which is exactly when the operator is deciding whether the contact is worth
+// chasing. The comparison goes through keyFn on both sides (rather than a SQL
+// equality) because logged county spellings vary — "Los Angeles" against
+// "LOS ANGELES, CA" — and the key function is what already resolves that
+// everywhere else.
+func (r *Repo) CountyWorked(ctx context.Context, state, cnty string, keyFn func(state, cnty string) string) (bool, error) {
+	want := keyFn(state, cnty)
+	if want == "" {
+		return false, nil
+	}
+	// Narrowed to the one state: a few dozen rows, not the whole logbook.
+	rows, err := r.db.QueryContext(ctx,
+		`SELECT DISTINCT COALESCE(state,''), COALESCE(cnty,'') FROM qso
+		 WHERE dxcc IN (291,110,6) AND cnty IS NOT NULL AND cnty != ''
+		   AND upper(COALESCE(state,'')) = upper(?)`, strings.TrimSpace(state))
+	if err != nil {
+		return false, err
+	}
+	defer rows.Close()
+	for rows.Next() {
+		var st, cn string
+		if err := rows.Scan(&st, &cn); err != nil {
+			return false, err
+		}
+		if keyFn(st, cn) == want {
+			return true, nil
+		}
+	}
+	return false, rows.Err()
+}
+
 // WorkedCallBandModeKeys returns the set of every worked "CALL|BAND|MODE" key
 // (all upper-cased), loaded in one pass. It backs the in-memory worked-index the
 // alert engine checks per cluster spot — a DB query per spot cannot keep up with

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.22.6"
+	appVersion = "0.22.8"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.