chore: release v0.23.1

The 0.22.7/0.22.8 breakage came from a Xiegu-reported fault being fixed
inside the Yaesu and Kenwood backends. The lesson is structural: nothing
a backend does may be steered by another backend's report or another
backend's setting.

The lower-lines checkbox introduced for 0.22.9 was still one shared key
applied to both Yaesu and Kenwood — the same reflex in miniature. It is
now cat.yaesu.low_dtr_rts and cat.kenwood.low_dtr_rts, each checkbox in
its backend's own settings block, each wired only to its backend. The
shared key never shipped, so nothing needs migrating.

app.go

@@ -114,21 +114,28 @@ const (
 	keyCATXieguPort       = "cat.xiegu.port"      // Xiegu CI-V serial port (G90/X6100…)
 	keyCATXieguBaud       = "cat.xiegu.baud"      // Xiegu CI-V baud (G90 default 19200)
 	keyCATXieguAddr       = "cat.xiegu.addr"      // Xiegu CI-V address (factory 0x70)
+	keyCATXieguPTTLine    = "cat.xiegu.ptt_line"  // "" | rts | dtr — G90 does not key over CI-V
 	keyCATYaesuPort       = "cat.yaesu.port"      // Yaesu CAT serial port (e.g. COM4)
 	keyCATYaesuBaud       = "cat.yaesu.baud"      // Yaesu CAT baud (FTDX10/101 default 38400)
 	keyCATKenwoodHost     = "cat.kenwood.host"    // Kenwood CAT over a network serial bridge (ser2net), "host:port"
 	keyCATKenwoodPort     = "cat.kenwood.port"    // Kenwood CAT serial port (TS-590/890/2000, Elecraft)
 	keyCATKenwoodBaud     = "cat.kenwood.baud"    // Kenwood CAT baud (TS-590 default 9600, TS-890 115200)
-	keyCATIcomPort        = "cat.icom.port"       // Icom USB CI-V serial port (e.g. COM5)
+	// One key PER BACKEND, deliberately not shared. A Xiegu fix that reached
-	keyCATIcomBaud        = "cat.icom.baud"       // Icom CI-V baud (default 115200)
+	// into the Yaesu and Kenwood backends is what broke them in 0.22.7/0.22.8;
-	keyCATIcomAddr        = "cat.icom.addr"       // Icom CI-V address, decimal (IC-7610 = 152 / 0x98)
+	// the rule since is that nothing a backend does may be steered by another
-	keyCATIcomNetHost     = "cat.icom.net.host"   // Icom network remote: rig IP/hostname
+	// backend's setting.
-	keyCATIcomNetUser     = "cat.icom.net.user"   // Icom network: Network User1 ID
+	keyCATYaesuLowLines   = "cat.yaesu.low_dtr_rts"   // deassert DTR/RTS on connect
-	keyCATIcomNetPass     = "cat.icom.net.pass"   // Icom network: Network User1 password
+	keyCATKenwoodLowLines = "cat.kenwood.low_dtr_rts" // deassert DTR/RTS on connect
-	keyCATIcomNetAudio    = "cat.icom.net.audio"  // Icom network: stream RX audio on 50003 (experimental)
+	keyCATIcomPort        = "cat.icom.port"           // Icom USB CI-V serial port (e.g. COM5)
-	keyCATTCIHost         = "cat.tci.host"        // TCI host (Expert Electronics SunSDR / ExpertSDR2)
+	keyCATIcomBaud        = "cat.icom.baud"           // Icom CI-V baud (default 115200)
-	keyCATTCIPort         = "cat.tci.port"        // TCI WebSocket port (default 40001)
+	keyCATIcomAddr        = "cat.icom.addr"           // Icom CI-V address, decimal (IC-7610 = 152 / 0x98)
-	keyCATTCISpots        = "cat.tci.spots"       // push cluster spots to the TCI panorama
+	keyCATIcomNetHost     = "cat.icom.net.host"       // Icom network remote: rig IP/hostname
+	keyCATIcomNetUser     = "cat.icom.net.user"       // Icom network: Network User1 ID
+	keyCATIcomNetPass     = "cat.icom.net.pass"       // Icom network: Network User1 password
+	keyCATIcomNetAudio    = "cat.icom.net.audio"      // Icom network: stream RX audio on 50003 (experimental)
+	keyCATTCIHost         = "cat.tci.host"            // TCI host (Expert Electronics SunSDR / ExpertSDR2)
+	keyCATTCIPort         = "cat.tci.port"            // TCI WebSocket port (default 40001)
+	keyCATTCISpots        = "cat.tci.spots"           // push cluster spots to the TCI panorama
 
 	// Audio (Digital Voice Keyer + QSO recorder). Machine-local hardware, so
 	// global (not per-profile) like CAT/rotator. Device fields store the
@@ -370,27 +377,33 @@ type CATSettings struct {
 	XieguPort       string `json:"xiegu_port"`        // Xiegu CI-V serial port (G90/X6100…)
 	XieguBaud       int    `json:"xiegu_baud"`        // Xiegu CI-V baud (G90 default 19200)
 	XieguAddr       int    `json:"xiegu_addr"`        // Xiegu CI-V address (factory 0x70)
+	XieguPTTLine    string `json:"xiegu_ptt_line"`    // "", "rts" or "dtr" — how the rig is keyed
 	YaesuPort       string `json:"yaesu_port"`        // Yaesu CAT serial port (e.g. COM4)
 	YaesuBaud       int    `json:"yaesu_baud"`        // Yaesu CAT baud (FTDX10/101 default 38400)
 	KenwoodHost     string `json:"kenwood_host"`      // "host:port" of a serial-over-network bridge (ser2net, Ethernet-serial
 	// adapter). NOT the radio’s own RJ45, which speaks Kenwood’s KNS/ARCP.
-	KenwoodPort    string `json:"kenwood_port"`    // Kenwood CAT serial port (TS-590/890/2000, Elecraft)
+	KenwoodPort string `json:"kenwood_port"` // Kenwood CAT serial port (TS-590/890/2000, Elecraft)
-	KenwoodBaud    int    `json:"kenwood_baud"`    // Kenwood CAT baud (TS-590 default 9600)
+	KenwoodBaud int    `json:"kenwood_baud"` // Kenwood CAT baud (TS-590 default 9600)
-	IcomPort       string `json:"icom_port"`       // Icom USB CI-V serial port (e.g. COM5)
+	// Per-backend: deassert DTR and RTS after opening the CAT port, for
-	IcomBaud       int    `json:"icom_baud"`       // Icom CI-V baud (default 115200)
+	// interfaces that read either line as PTT. Off by default: lowering them
-	IcomAddr       int    `json:"icom_addr"`       // Icom CI-V address, decimal (IC-7610 = 152)
+	// stops some USB-serial interfaces transmitting at all.
-	IcomNetHost    string `json:"icom_net_host"`   // Icom network remote: rig IP/hostname (built-in LAN server)
+	YaesuLowLines   bool   `json:"yaesu_low_lines"`
-	IcomNetUser    string `json:"icom_net_user"`   // Icom network Network User1 ID
+	KenwoodLowLines bool   `json:"kenwood_low_lines"`
-	IcomNetPass    string `json:"icom_net_pass"`   // Icom network Network User1 password
+	IcomPort        string `json:"icom_port"`       // Icom USB CI-V serial port (e.g. COM5)
-	IcomNetAudio   bool   `json:"icom_net_audio"`  // Icom network: stream RX audio (50003) — experimental, needs on-rig verification
+	IcomBaud        int    `json:"icom_baud"`       // Icom CI-V baud (default 115200)
-	TCIHost        string `json:"tci_host"`        // TCI host (Expert Electronics SunSDR)
+	IcomAddr        int    `json:"icom_addr"`       // Icom CI-V address, decimal (IC-7610 = 152)
-	TCIPort        int    `json:"tci_port"`        // TCI WebSocket port (default 40001)
+	IcomNetHost     string `json:"icom_net_host"`   // Icom network remote: rig IP/hostname (built-in LAN server)
-	TCISpots       bool   `json:"tci_spots"`       // push cluster spots to the TCI panorama
+	IcomNetUser     string `json:"icom_net_user"`   // Icom network Network User1 ID
-	PollMs         int    `json:"poll_ms"`         // poll interval in ms (default 250)
+	IcomNetPass     string `json:"icom_net_pass"`   // Icom network Network User1 password
-	DelayMs        int    `json:"delay_ms"`        // pause between commands (default 0)
+	IcomNetAudio    bool   `json:"icom_net_audio"`  // Icom network: stream RX audio (50003) — experimental, needs on-rig verification
-	DigitalDefault string `json:"digital_default"` // when CAT says DATA, surface this mode (FT8/FT4/RTTY/…)
+	TCIHost         string `json:"tci_host"`        // TCI host (Expert Electronics SunSDR)
-	ShareEnabled   bool   `json:"share_enabled"`   // serve CAT to other programs (Hamlib NET rigctl)
+	TCIPort         int    `json:"tci_port"`        // TCI WebSocket port (default 40001)
-	SharePort      int    `json:"share_port"`      // TCP port for it (default 4532)
+	TCISpots        bool   `json:"tci_spots"`       // push cluster spots to the TCI panorama
+	PollMs          int    `json:"poll_ms"`         // poll interval in ms (default 250)
+	DelayMs         int    `json:"delay_ms"`        // pause between commands (default 0)
+	DigitalDefault  string `json:"digital_default"` // when CAT says DATA, surface this mode (FT8/FT4/RTTY/…)
+	ShareEnabled    bool   `json:"share_enabled"`   // serve CAT to other programs (Hamlib NET rigctl)
+	SharePort       int    `json:"share_port"`      // TCP port for it (default 4532)
 }
 
 // ModePreset is a mode entry with default RST values to auto-populate
@@ -969,8 +982,18 @@ func (a *App) startup(ctx context.Context) {
 		// burst of these lines = the frontend is being re-rendered rapidly (the
 		// "screen flickers" symptom). Shows WHAT is churning — connection flap,
 		// or freq/split/mode oscillating between slices during FT8.
-		applog.Printf("cat:state → connected=%v freq=%d rx=%d split=%v mode=%s band=%s",
+		// The error goes in the line too. Without it a disconnect read
-			s.Connected, s.FreqHz, s.RxFreqHz, s.Split, s.Mode, s.Band)
+		// "connected=false freq=0" and said nothing about WHY — the reason was in
+		// RigState.Error, which only ever reached a tooltip, so every report of
+		// "it stopped connecting" arrived without the one fact that explains it.
+		applog.Printf("cat:state → connected=%v freq=%d rx=%d split=%v mode=%s band=%s%s",
+			s.Connected, s.FreqHz, s.RxFreqHz, s.Split, s.Mode, s.Band,
+			func() string {
+				if s.Error == "" {
+					return ""
+				}
+				return " err=" + s.Error
+			}())
 		if a.ctx != nil {
 			wruntime.EventsEmit(a.ctx, "cat:state", s)
 		}
@@ -3502,10 +3525,17 @@ func (a *App) GetAwards() ([]award.Result, error) {
 // GetAward computes progress for a single award by code (one whole-log scan,
 // matching only that award). This is what the awards UI calls when an award is
 // selected, so opening the panel doesn't scan every award up front.
-func (a *App) GetAward(code string) (award.Result, error) {
+// GetAward computes one award. modeClass ("CW", "PHONE", "DIGI", or "" for all)
+// narrows it to contacts of that class BEFORE the engine runs, so the bands, the
+// counts and the confirmations all describe that mode.
+//
+// Filtering only the reference list was not enough: a reference kept because it
+// has one CW contact still showed the band cells it earned on SSB, which is
+// precisely what an operator chasing a CW award must not be told.
+func (a *App) GetAward(code, modeClass string) (award.Result, error) {
 	for _, d := range a.awardDefs() {
 		if strings.EqualFold(d.Code, code) {
-			results, err := a.computeAwards([]award.Def{d})
+			results, err := a.computeAwardsForMode([]award.Def{d}, modeClass)
 			if err != nil {
 				return award.Result{}, err
 			}
@@ -3521,6 +3551,13 @@ func (a *App) GetAward(code string) (award.Result, error) {
 // computeAwards runs the engine for the given award definitions over the whole
 // log and enriches dynamic awards (totals + worked-reference names).
 func (a *App) computeAwards(defs []award.Def) ([]award.Result, error) {
+	return a.computeAwardsForMode(defs, "")
+}
+
+// computeAwardsForMode is computeAwards restricted to one mode class. The
+// snapshot is shared and cached by log revision, so this costs a matching pass,
+// not a database read.
+func (a *App) computeAwardsForMode(defs []award.Def, modeClass string) ([]award.Result, error) {
 	if a.qso == nil {
 		return nil, fmt.Errorf("db not initialized")
 	}
@@ -3528,6 +3565,15 @@ func (a *App) computeAwards(defs []award.Def) ([]award.Result, error) {
 	if err != nil {
 		return nil, err
 	}
+	if want := strings.ToUpper(strings.TrimSpace(modeClass)); want != "" && want != "ALL" {
+		kept := make([]qso.QSO, 0, len(all))
+		for _, q := range all {
+			if award.ModeClass(q.Mode) == want {
+				kept = append(kept, q)
+			}
+		}
+		all = kept
+	}
 	nameOf := func(field, ref string) string {
 		switch field {
 		case "dxcc":
@@ -3578,7 +3624,11 @@ func (a *App) computeAwards(defs []award.Def) ([]award.Result, error) {
 // AwardCellQSOs returns the QSOs that contribute to one award reference,
 // optionally on a single band (band="" = all bands). Powers the award-grid
 // cell drill-down ("show me every Canada contact on 20m").
-func (a *App) AwardCellQSOs(code, ref, band string) ([]qso.QSO, error) {
+// AwardCellQSOs lists the contacts behind one cell. modeClass ("CW", "PHONE",
+// "DIGI", or "" for all) applies the SAME filter as the reference list above it
+// — without it, filtering the list to CW and then opening a reference showed the
+// FT8 and SSB contacts that filter exists to hide.
+func (a *App) AwardCellQSOs(code, ref, band, modeClass string) ([]qso.QSO, error) {
 	if a.qso == nil {
 		return nil, fmt.Errorf("db not initialized")
 	}
@@ -3596,12 +3646,16 @@ func (a *App) AwardCellQSOs(code, ref, band string) ([]qso.QSO, error) {
 	metas := a.awardRefMetas([]award.Def{*def})[strings.ToUpper(def.Code)]
 	wantRef := strings.ToUpper(strings.TrimSpace(ref))
 	wantBand := strings.ToLower(strings.TrimSpace(band))
+	wantMode := strings.ToUpper(strings.TrimSpace(modeClass))
 
 	var out []qso.QSO
 	err := a.qso.IterateAll(a.ctx, func(q qso.QSO) error {
 		if wantBand != "" && strings.ToLower(strings.TrimSpace(q.Band)) != wantBand {
 			return nil
 		}
+		if wantMode != "" && wantMode != "ALL" && award.ModeClass(q.Mode) != wantMode {
+			return nil
+		}
 		a.enrichQSOForAwards(&q)
 		for _, c := range award.MatchQSO(*def, metas, &q) {
 			if strings.ToUpper(c) == wantRef {
@@ -4234,6 +4288,11 @@ type QSOAwardRef struct {
 	Ref      string `json:"ref"`
 	Name     string `json:"name,omitempty"`
 	Pickable bool   `json:"pickable"`
+	// Ambiguous marks a reference the matcher found but did NOT assign, because
+	// the award allows one reference per QSO and several matched. Offered as a
+	// choice in the entry panel instead of being added silently — see
+	// award.Def.OneRefPerQSO.
+	Ambiguous bool `json:"ambiguous,omitempty"`
 }
 
 // enrichQSOForAwards fills in CQ/ITU zone, continent and DXCC entity from
@@ -4365,6 +4424,29 @@ func (a *App) ComputeQSOAwardRefs(q qso.QSO) ([]QSOAwardRef, error) {
 			out = append(out, QSOAwardRef{Code: r.Code, Ref: rf.Ref, Name: rf.Name, Pickable: pickable})
 		}
 	}
+	// A one-reference award that matched several candidates assigned none. Say so
+	// HERE, while the QSO is still on screen: an operator who only learns about it
+	// from the awards table months later has to go and find the contact again.
+	for _, d := range defs {
+		if !d.OneRefPerQSO {
+			continue
+		}
+		metas := a.awardRefMetas([]award.Def{d})[strings.ToUpper(d.Code)]
+		ex := award.Explain(d, metas, &q)
+		if len(ex.Ambiguous) == 0 {
+			continue
+		}
+		names := map[string]string{}
+		for _, m := range metas {
+			names[strings.ToUpper(m.Code)] = m.Name
+		}
+		for _, ref := range ex.Ambiguous {
+			out = append(out, QSOAwardRef{
+				Code: d.Code, Ref: ref, Name: names[strings.ToUpper(ref)],
+				Pickable: true, Ambiguous: true,
+			})
+		}
+	}
 	return out, nil
 }
 
@@ -6748,7 +6830,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if a.settings == nil {
 		return CATSettings{Backend: "omnirig", OmniRigNum: 1, PollMs: 250}, fmt.Errorf("db not initialized")
 	}
-	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort)
+	m, err := a.settings.GetMany(a.ctx, keyCATEnabled, keyCATBackend, keyCATOmniRigNum, keyCATOmniRigVFO, keyCATFlexHost, keyCATFlexPort, keyCATFlexSpots, keyCATFlexDecodeSpots, keyCATFlexDecodeSecs, keyCATXieguPort, keyCATXieguBaud, keyCATXieguAddr, keyCATXieguPTTLine, keyCATYaesuPort, keyCATYaesuBaud, keyCATKenwoodPort, keyCATKenwoodBaud, keyCATKenwoodHost, keyCATYaesuLowLines, keyCATKenwoodLowLines, keyCATIcomPort, keyCATIcomBaud, keyCATIcomAddr, keyCATIcomNetHost, keyCATIcomNetUser, keyCATIcomNetPass, keyCATIcomNetAudio, keyCATTCIHost, keyCATTCIPort, keyCATTCISpots, keyCATPollMs, keyCATDelayMs, keyCATDigitalDefault, keyCATShareEnabled, keyCATSharePort)
 	if err != nil {
 		return CATSettings{}, err
 	}
@@ -6769,6 +6851,8 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 		KenwoodPort:     m[keyCATKenwoodPort],
 		KenwoodHost:     m[keyCATKenwoodHost],
 		KenwoodBaud:     9600,
+		YaesuLowLines:   m[keyCATYaesuLowLines] == "1",
+		KenwoodLowLines: m[keyCATKenwoodLowLines] == "1",
 		IcomPort:        m[keyCATIcomPort],
 		IcomBaud:        115200,
 		IcomAddr:        0x98, // IC-7610 default
@@ -6800,6 +6884,7 @@ func (a *App) GetCATSettings() (CATSettings, error) {
 	if n, _ := strconv.Atoi(m[keyCATXieguBaud]); n > 0 {
 		out.XieguBaud = n
 	}
+	out.XieguPTTLine = m[keyCATXieguPTTLine]
 	if n, _ := strconv.Atoi(m[keyCATXieguAddr]); n > 0 && n <= 0xFF {
 		out.XieguAddr = n
 	}
@@ -6903,6 +6988,12 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 	if s.DigitalDefault == "" {
 		s.DigitalDefault = "FT8"
 	}
+	b01 := func(v bool) string {
+		if v {
+			return "1"
+		}
+		return "0"
+	}
 	shareEnabled := "0"
 	if s.ShareEnabled {
 		shareEnabled = "1"
@@ -6920,11 +7011,14 @@ func (a *App) SaveCATSettings(s CATSettings) error {
 		keyCATXieguPort:       strings.TrimSpace(s.XieguPort),
 		keyCATXieguBaud:       strconv.Itoa(s.XieguBaud),
 		keyCATXieguAddr:       strconv.Itoa(s.XieguAddr),
+		keyCATXieguPTTLine:    strings.ToLower(strings.TrimSpace(s.XieguPTTLine)),
 		keyCATYaesuPort:       strings.TrimSpace(s.YaesuPort),
 		keyCATYaesuBaud:       strconv.Itoa(s.YaesuBaud),
 		keyCATKenwoodPort:     strings.TrimSpace(s.KenwoodPort),
 		keyCATKenwoodHost:     strings.TrimSpace(s.KenwoodHost),
 		keyCATKenwoodBaud:     strconv.Itoa(s.KenwoodBaud),
+		keyCATYaesuLowLines:   b01(s.YaesuLowLines),
+		keyCATKenwoodLowLines: b01(s.KenwoodLowLines),
 		keyCATIcomPort:        strings.TrimSpace(s.IcomPort),
 		keyCATIcomBaud:        strconv.Itoa(s.IcomBaud),
 		keyCATIcomAddr:        strconv.Itoa(s.IcomAddr),
@@ -12743,13 +12837,20 @@ func (a *App) reloadCAT() {
 		// Xiegu G90/X6100/X6200/X5105 — CI-V, but a REDUCED command set: no scope,
 		// no DSP block, no data mode. Its own backend rather than the Icom one at
 		// another address, so we never poll a G90 for answers it cannot give.
-		a.cat.Start(cat.NewXiegu(s.XieguPort, s.XieguBaud, s.XieguAddr, s.DigitalDefault))
+		xg := cat.NewXiegu(s.XieguPort, s.XieguBaud, s.XieguAddr, s.DigitalDefault)
+		// A G90 ignores the CI-V PTT command; its interfaces key on a hardware
+		// line instead. Selected here so rigctld — and therefore WSJT-X — can
+		// actually put the rig on the air.
+		xg.SetPTTLine(s.XieguPTTLine)
+		a.cat.Start(xg)
 	case "yaesu":
 		// Native Yaesu CAT over the rig's USB/serial port — no OmniRig. Every
 		// Yaesu fault reported so far came from OmniRig's interpretation layer
 		// (a rig file that hides the VFO, a Freq property meaning A on one model
 		// and B on another); talking to the radio directly removes it.
-		a.cat.Start(cat.NewYaesu(s.YaesuPort, s.YaesuBaud, s.DigitalDefault))
+		yz := cat.NewYaesu(s.YaesuPort, s.YaesuBaud, s.DigitalDefault)
+		yz.SetLowerLines(s.YaesuLowLines)
+		a.cat.Start(yz)
 	case "kenwood":
 		// Native Kenwood CAT — TS-590/890/990/2000 and everything that speaks the
 		// same dialect (Elecraft K3/K4, and the "Kenwood" setting on other rigs).
@@ -12761,7 +12862,9 @@ func (a *App) reloadCAT() {
 		if h := strings.TrimSpace(s.KenwoodHost); h != "" {
 			a.cat.Start(cat.NewKenwoodTCP(h, s.DigitalDefault))
 		} else {
-			a.cat.Start(cat.NewKenwood(s.KenwoodPort, s.KenwoodBaud, s.DigitalDefault))
+			kw := cat.NewKenwood(s.KenwoodPort, s.KenwoodBaud, s.DigitalDefault)
+			kw.SetLowerLines(s.KenwoodLowLines)
+			a.cat.Start(kw)
 		}
 	case "icom":
 		// Native Icom CI-V over the radio's USB serial port (local control).
@@ -13357,12 +13460,12 @@ func boolStr(b bool) string {
 // StationDevice is one configured relay board for the Station Control tab.
 type StationDevice struct {
 	ID       string   `json:"id"`
-	Type     string   `json:"type"` // "webswitch" | "kmtronic" | "denkovi" | "usbrelay"
+	Type     string   `json:"type"` // "webswitch" | "kmtronic" | "dingtian" | "denkovi" | "usbrelay"
 	Name     string   `json:"name"`
 	Host     string   `json:"host"`           // IP for network boards; FTDI serial for denkovi; COM port for usbrelay
-	User     string   `json:"user,omitempty"` // KMTronic HTTP auth (blank = none)
+	User     string   `json:"user,omitempty"` // KMTronic HTTP auth; Dingtian HTTP session ID (blank = none)
-	Pass     string   `json:"pass,omitempty"`
+	Pass     string   `json:"pass,omitempty"` // KMTronic HTTP auth; Dingtian relay password (0–9999)
-	Channels int      `json:"channels,omitempty"` // usbrelay only: number of relays (1/2/4/8/16)
+	Channels int      `json:"channels,omitempty"` // usbrelay/denkovi/dingtian: number of relays
 	Labels   []string `json:"labels"`             // per-relay label (index 0 = relay 1)
 }
 
@@ -13370,10 +13473,13 @@ type StationDevice struct {
 // except the Denkovi (4 or 8) and the generic USB-serial board, whose channel
 // count the user picks.
 func deviceRelayCount(d StationDevice) int {
-	if d.Type == "usbrelay" || d.Type == "denkovi" {
+	if d.Type == "usbrelay" || d.Type == "denkovi" || d.Type == "dingtian" {
 		if d.Channels >= 1 {
 			return d.Channels
 		}
+		if d.Type == "dingtian" {
+			return 2 // the smallest board; the real count comes from its status reply
+		}
 		return 8
 	}
 	return relayCountFor(d.Type)
@@ -13401,6 +13507,9 @@ func buildDeviceDriver(d StationDevice) relaydev.Device {
 	switch d.Type {
 	case "kmtronic":
 		return relaydev.NewKMTronic(d.Host, d.User, d.Pass)
+	case "dingtian":
+		// User carries the optional HTTP session ID, Pass the relay password.
+		return relaydev.NewDingtian(d.Host, d.User, d.Pass, deviceRelayCount(d))
 	case "denkovi":
 		// Host carries the FTDI serial number (e.g. "DAE0006K"), not a hostname.
 		return relaydev.NewDenkovi(d.Host, deviceRelayCount(d))
@@ -13504,7 +13613,7 @@ func (a *App) SaveStationDevices(devs []StationDevice) error {
 	}
 	for i := range devs {
 		switch devs[i].Type {
-		case "kmtronic", "denkovi", "usbrelay", "webswitch":
+		case "kmtronic", "dingtian", "denkovi", "usbrelay", "webswitch":
 			// known type — keep
 		default:
 			devs[i].Type = "webswitch"
@@ -14687,8 +14796,14 @@ func (a *App) AmpOperate(id string, on bool) error {
 }
 
 // AmpPower turns the given amp on/off (SPE and ACOM; the PGXL has no power
-// command on its direct link).
+// command on its direct link). Logged here because the UI buttons swallow the
-func (a *App) AmpPower(id string, on bool) error {
+// returned error — a failed power-on otherwise looks like a dead button.
+func (a *App) AmpPower(id string, on bool) (err error) {
+	defer func() {
+		if err != nil {
+			applog.Printf("amp %s: power %v failed: %v", id, on, err)
+		}
+	}()
 	inst := a.ampInstByID(id)
 	if inst == nil {
 		return fmt.Errorf("amplifier not running — check Settings → Amplifier")
@@ -15361,6 +15476,12 @@ type SpotStatus struct {
 	// when that database has been downloaded); POTA from the spot's tagged park.
 	NewCounty bool `json:"new_county"`
 	NewPOTA   bool `json:"new_pota"`
+	// NewPfx flags a CQ WPX prefix never worked before, and Pfx is that prefix.
+	// Also orthogonal: a common entity on a worked band can still carry a prefix
+	// that has never been in the log, which is exactly what a WPX chaser is
+	// scanning the cluster for.
+	NewPfx bool   `json:"new_pfx"`
+	Pfx    string `json:"pfx,omitempty"`
 }
 
 // ClusterSpotStatuses takes a batch of spots and returns slot status for
@@ -15416,6 +15537,16 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 	// lookup) and worked POTA parks. Both built once per batch.
 	workedCounties, _ := a.qso.WorkedCountyKeys(a.ctx, award.USCountyKey)
 	workedPOTA, _ := a.qso.WorkedPOTARefs(a.ctx)
+	// Worked WPX prefixes, derived from the callsigns we already loaded — no
+	// extra query. Derived rather than read from the stored PFX column: that
+	// column is only filled when an import supplied it, and deriving keeps this
+	// in step with the WPX award, which does the same thing.
+	workedPfx := make(map[string]struct{}, len(workedCalls))
+	for c := range workedCalls {
+		if p := award.WPXPrefix(c); p != "" {
+			workedPfx[p] = struct{}{}
+		}
+	}
 	for i, q := range spots {
 		out[i] = SpotStatus{
 			Call: q.Call,
@@ -15425,6 +15556,13 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 		if _, ok := workedCalls[strings.ToUpper(q.Call)]; ok {
 			out[i].WorkedCall = true
 		}
+		// NEW PFX: the spot's CQ WPX prefix, never worked before.
+		if p := award.WPXPrefix(q.Call); p != "" {
+			out[i].Pfx = p
+			if _, done := workedPfx[p]; !done {
+				out[i].NewPfx = true
+			}
+		}
 		// NEW POTA: the spot's tagged park, never worked before.
 		if ref := strings.ToUpper(strings.TrimSpace(q.POTARef)); ref != "" {
 			if _, done := workedPOTA[ref]; !done {
@@ -15491,6 +15629,24 @@ func (a *App) ClusterSpotStatuses(spots []SpotQuery) []SpotStatus {
 	return out
 }
 
+// IsNewUSCounty reports whether this state/county pair has never been worked.
+//
+// Same question the cluster's NEW CTY badge answers, asked for the contact
+// currently in the entry panel: county hunters want to know BEFORE the QSO ends,
+// and by the time a county shows up in the awards table the station is long
+// gone. Empty (or non-US) input is not "new" — it is unknown, and a badge on a
+// guess is worse than no badge.
+func (a *App) IsNewUSCounty(state, cnty string) bool {
+	if a.qso == nil || strings.TrimSpace(cnty) == "" {
+		return false
+	}
+	worked, err := a.qso.CountyWorked(a.ctx, state, cnty, award.USCountyKey)
+	if err != nil {
+		return false
+	}
+	return !worked
+}
+
 // ── CAT sharing (Hamlib NET rigctl server) ────────────────────────────────
 
 // catShareRig adapts the CAT manager to what the rigctld server needs. A thin

changelog.json

@@ -1,9 +1,110 @@
 [
   {
-    "version": "0.22.5",
+    "version": "0.23.1",
+    "date": "",
+    "en": [
+      "DX cluster: NEW COUNTY is green, like NEW POTA.",
+      "CW: pressing ESC during a macro no longer turns the report from 599 into 59 when \"ESC clears the callsign too\" is on."
+    ],
+    "fr": [
+      "Cluster DX : NOUVEAU COMTÉ passe en vert, comme NOUVEAU POTA.",
+      "CW : appuyer sur Échap pendant une macro ne fait plus passer le report de 599 à 59 quand l'option « Échap efface aussi l'indicatif » est cochée."
+    ]
+  },
+  {
+    "version": "0.23.0",
+    "date": "",
+    "en": [
+      "Station Control: Dingtian IOT relay boards (2 to 32 relays, LAN or WiFi) can now be added.",
+      "ACOM amplifiers: the card now shows TUNE while the tuner is running, instead of an unknown state.",
+      "DX cluster: the status pills are gone. The call, band and mode turn yellow when that one is new, and a callsign already in the log turns blue.",
+      "Reports: starting OpsLog with the rig already in CW no longer leaves the RST fields on 59 — they now follow the mode you are actually on. (Thanks HB9HBY)",
+      "DX cluster: NEW PFX marks a spot whose CQ WPX prefix has never been worked, in the status column and as a filter."
+    ],
+    "fr": [
+      "Contrôle station : les cartes relais Dingtian IOT (2 à 32 relais, LAN ou WiFi) peuvent désormais être ajoutées.",
+      "Amplificateurs ACOM : la carte affiche TUNE pendant l'accord, au lieu d'un état inconnu.",
+      "Cluster DX : les pastilles de statut disparaissent. L'indicatif, la bande et le mode passent en jaune quand celui-ci est nouveau, et un indicatif déjà dans le log passe en bleu.",
+      "Reports : lancer OpsLog avec le poste déjà en CW ne laisse plus les RST à 59 — ils suivent maintenant le mode réellement en cours. (Merci HB9HBY)",
+      "Cluster DX : NOUVEAU PFX signale un spot dont le préfixe CQ WPX n'a jamais été contacté, dans la colonne de statut et en filtre."
+    ]
+  },
+  {
+    "version": "0.22.9",
+    "date": "",
+    "en": [
+      "Awards: the CW / Phone / Digital filter now applies to the whole award — bands, counts, confirmations and the contacts behind a cell — instead of only hiding rows from the reference list.",
+      "Yaesu and Kenwood: a new option lowers the DTR and RTS lines on connect, for interfaces that read either as PTT and keep the radio transmitting while OpsLog is open. Off by default — lowering them stops other interfaces transmitting at all.",
+      "SPE amplifiers: the ON and OFF buttons now switch the amplifier on and off over USB.",
+      "Quieter diagnostic log: no more FlexRadio meter subscriptions, per-packet WSJT-X/MSHV lines, or repeated Tuner Genius / PGXL / SPE status frames.",
+      "Station Control: the cards now line up on a grid — same width, and same height across a row — and the column selector goes up to 6.",
+      "New amplifier widget beside the keyers (flame icon): Operate, power ON/OFF, the SPE power level and live watts / SWR / temperature. With several amplifiers a dropdown on the icon picks the one to watch, or all of them.",
+      "Icom: the meters and front-panel readings are polled only while the Icom console is on screen. They were half of the CI-V traffic at all times, which matters when the link is shared — a microHAM Router splitting one CI-V port between OpsLog and WSJT-X, for instance.",
+      "Icom: the power-ON button sends a wake preamble sized for the CI-V speed. It was a fixed length that only suited 19200 baud, so a radio set faster — 115200 is the default — ignored the command.",
+      "The Tuner Genius power meter now shows the peak the device itself measured, instead of whatever instant the poll happened to catch — a kilowatt transmission could read a few hundred watts. Every power meter also clears the moment the carrier drops, instead of trailing several seconds behind it."
+    ],
+    "fr": [
+      "Diplômes : le filtre CW / Phonie / Numérique s’applique désormais à tout le diplôme — bandes, comptes, confirmations et QSO derrière une case — au lieu de masquer seulement des lignes de la liste des références.",
+      "Yaesu et Kenwood : une option abaisse les lignes DTR et RTS à la connexion, pour les interfaces qui les lisent comme PTT et laissent la radio en émission tant qu’OpsLog est ouvert. Désactivée par défaut — les abaisser empêche d’autres interfaces d’émettre.",
+      "Amplificateurs SPE : les boutons ON et OFF allument et éteignent désormais l’amplificateur par l’USB.",
+      "Journal de diagnostic allégé : plus d’abonnements aux mètres FlexRadio, de ligne par paquet WSJT-X/MSHV, ni de trames statut Tuner Genius / PGXL / SPE répétées.",
+      "Contrôle station : les cartes s’alignent désormais sur une grille — même largeur, et même hauteur sur une ligne — et le sélecteur de colonnes va jusqu’à 6.",
+      "Nouveau widget amplificateur à côté des manipulateurs (icône flamme) : Operate, marche/arrêt, le niveau de puissance SPE et les watts / ROS / température en direct. Avec plusieurs amplis, une liste déroulante sur l’icône choisit celui à surveiller, ou tous.",
+      "Icom : les mesures et les réglages de façade ne sont interrogés que lorsque la console Icom est affichée. Ils représentaient la moitié du trafic CI-V en permanence, ce qui compte quand la liaison est partagée — un Router microHAM qui répartit un port CI-V entre OpsLog et WSJT-X, par exemple.",
+      "Icom : le bouton de mise sous tension envoie un préambule de réveil dimensionné pour la vitesse CI-V. Sa longueur était fixe et ne convenait qu’à 19200 bauds, si bien qu’une radio réglée plus vite — 115200 par défaut — ignorait la commande.",
+      "Le mètre de puissance du Tuner Genius affiche désormais la crête mesurée par l’appareil lui-même, au lieu de l’instant capté par l’interrogation — une émission d’un kilowatt pouvait afficher quelques centaines de watts. Tous les mètres de puissance retombent aussi dès la fin de l’émission, au lieu de traîner plusieurs secondes."
+    ]
+  },
+  {
+    "version": "0.22.8",
+    "date": "",
+    "en": [
+      "Main tab: drag the divider between the two panes to resize them. The setting is remembered and travels with the data folder; double-click the divider to even them out.",
+      "Kenwood: bytes arriving glued to the previous answer are no longer discarded, and the link starts from a clean buffer — a rig whose replies ran together could end up one answer behind and never report connected.",
+      "The CAT log line now carries the error explaining a disconnection.",
+      "Kenwood and Yaesu CAT connect again: 0.22.7 lowered the DTR and RTS lines on those ports, which stops many USB-serial interfaces from transmitting. Only Xiegu, where the problem was reported, still does it.",
+      "Kenwood: a port that opens but sends nothing is now reported differently from one sending data that does not answer, and the error quotes what arrived."
+    ],
+    "fr": [
+      "Onglet Principal : faites glisser le séparateur entre les deux volets pour les redimensionner. Le réglage est mémorisé et suit le dossier de données ; double-clic pour les égaliser.",
+      "Kenwood : les octets reçus collés à la réponse précédente ne sont plus jetés, et la liaison démarre sur un tampon vide — une radio dont les réponses s’enchaînent pouvait rester une réponse en retard et ne jamais apparaître connectée.",
+      "La ligne de journal CAT indique désormais l’erreur expliquant une déconnexion.",
+      "Le CAT Kenwood et Yaesu se connecte de nouveau : la 0.22.7 abaissait les lignes DTR et RTS sur ces ports, ce qui empêche beaucoup d’interfaces USB-série d’émettre. Seul Xiegu, où le problème avait été signalé, le fait encore.",
+      "Kenwood : un port qui s’ouvre sans rien émettre est désormais distingué d’un port qui émet sans répondre, et l’erreur cite ce qui est arrivé."
+    ]
+  },
+  {
+    "version": "0.22.7",
+    "date": "",
+    "en": [
+      "Serial CAT no longer keys the radio just by connecting: DTR and RTS are dropped on Xiegu, Yaesu and Kenwood as they already were on Icom — a Xiegu G90 behind a DE-19 went straight into transmit and stayed there.",
+      "Xiegu: choose how the rig is keyed — CI-V command, RTS or DTR. A G90 does not transmit on the CI-V command, so this is also what lets WSJT-X transmit through the shared CAT link.",
+      "A reference you assign by hand now replaces what the matcher found instead of being added to it, so a correction survives the next recompute.",
+      "Awards: an award can be marked one reference per QSO. When several references then match the same contact it keeps none and lists them, so you pick — a contact does not silently get the wrong DOK. Off by default, so an n-fer POTA activation still counts every park.",
+      "Dark themes: the calendar icon of date and date-time fields is visible again.",
+      "Live award detection now sees the QTH, name, country, comment, note and grid you typed, not just the looked-up address — an award matching on the town stayed silent until the QSO was logged.",
+      "Info (F2) panel: the fields are sized for what they hold — a wider county, narrower prefix and zones, and the address takes the space left by the bearing and distances.",
+      "Clicking in the lower half no longer draws an orange rule under the tab strip.",
+      "A green NEW badge appears on the County field in Info (F2) when the contacted US county has never been worked.",
+      "DARC DOK award updated to v2 in the catalogue: one reference per QSO."
+    ],
+    "fr": [
+      "Le CAT série ne met plus la radio en émission par le seul fait de se connecter : DTR et RTS sont abaissés sur Xiegu, Yaesu et Kenwood comme ils l'étaient déjà sur Icom — un Xiegu G90 derrière un DE-19 partait en émission et y restait.",
+      "Xiegu : choix du passage en émission — commande CI-V, RTS ou DTR. Un G90 n'émet pas sur la commande CI-V, c'est donc aussi ce qui permet à WSJT-X d'émettre via le partage CAT.",
+      "Une référence que vous affectez à la main remplace désormais ce que la détection avait trouvé au lieu de s'y ajouter : une correction survit au recalcul suivant.",
+      "Diplômes : un diplôme peut être marqué une seule référence par QSO. Si plusieurs références correspondent alors au même contact, aucune n’est retenue et elles sont listées pour que vous choisissiez — un contact ne reçoit plus silencieusement le mauvais DOK. Désactivé par défaut, donc une activation POTA n-fer compte toujours tous les parcs.",
+      "Thèmes sombres : l’icône calendrier des champs date et date-heure est de nouveau visible.",
+      "La détection des diplômes en direct voit maintenant le QTH, le nom, le pays, le commentaire, la note et le locator saisis, et plus seulement l’adresse issue de la recherche — un diplôme qui matche sur la ville restait muet jusqu’à l’enregistrement du QSO.",
+      "Panneau Info (F2) : les champs sont dimensionnés selon leur contenu — comté plus large, préfixe et zones plus étroits, et l’adresse récupère la place laissée par l’azimut et les distances.",
+      "Un clic dans la moitié basse ne trace plus de trait orange sous la barre d’onglets.",
+      "Un badge vert NOUV apparaît sur le champ Comté dans Info (F2) quand le comté américain contacté n’a jamais été travaillé.",
+      "Diplôme DARC DOK mis à jour en v2 dans le catalogue : une seule référence par QSO."
+    ]
+  },
+  {
+    "version": "0.22.6",
     "date": "",
     "en": [
-      "Cluster filters gain NEW POTA and NEW COUNTY, alongside the existing status chips.",
       "A playback that fails to start now says so in the log instead of ending silently after a tenth of a second.",
       "Replaying a recording before the previous one has finished now works: the new playback waits for the audio device to be free instead of keying the radio and releasing at once.",
       "The play button becomes a stop button while the recording is going out: it cuts the transmission and releases the PTT, and you can send it again straight away.",
@@ -15,7 +116,6 @@
       "A quiet DX cluster no longer looks like a broken one: silence stopped counting as a disconnection, so a node with few spots keeps its session, its login and its filters."
     ],
     "fr": [
-      "Les filtres du cluster gagnent NEW POTA et NEW COUNTY, à côté des pastilles de statut existantes.",
       "Une lecture qui ne démarre pas le signale désormais dans le journal, au lieu de s'arrêter en silence au bout d'un dixième de seconde.",
       "Relancer un enregistrement avant la fin du précédent fonctionne désormais : la nouvelle lecture attend que le périphérique audio soit libre, au lieu de passer en émission et de relâcher aussitôt.",
       "Le bouton de lecture devient un bouton d'arrêt pendant l'émission de l'enregistrement : il coupe l'émission et relâche le PTT, et vous pouvez le renvoyer aussitôt.",
@@ -27,6 +127,16 @@
       "Un cluster calme ne passe plus pour un cluster mort : le silence ne compte plus comme une déconnexion, donc un nœud avec peu de spots garde sa session, son login et ses filtres."
     ]
   },
+  {
+    "version": "0.22.5",
+    "date": "",
+    "en": [
+      "Cluster filters gain NEW POTA and NEW COUNTY, alongside the existing status chips."
+    ],
+    "fr": [
+      "Les filtres du cluster gagnent NEW POTA et NEW COUNTY, à côté des pastilles de statut existantes."
+    ]
+  },
   {
     "version": "0.22.4",
     "date": "",

frontend/src/App.tsx

@@ -1,6 +1,6 @@
 import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import {
-  Activity, AlertCircle, Antenna, Bell, Check, CheckCircle2, ChevronDown, Clock, CloudOff, Compass, Database, Ear, Eraser, Gauge, Hash, Loader2, Lock,
+  Activity, AlertCircle, Antenna, Bell, Check, CheckCircle2, ChevronDown, Clock, CloudOff, Compass, Database, Ear, Eraser, Flame, Gauge, Hash, Loader2, Lock,
   Maximize2, Minimize2, Mic, MessageSquare, Pencil, Radio, RadioTower, RefreshCw, Satellite, Send, Settings, SlidersHorizontal, SpellCheck, Square, Terminal, Trash2, Unlock, X, Zap,
 } from 'lucide-react';
 
@@ -77,6 +77,7 @@ import { IcomPanel } from '@/components/IcomPanel';
 import { YaesuPanel } from '@/components/YaesuPanel';
 import { AntGeniusPanel, type AGStatus } from '@/components/AntGeniusPanel';
 import { TunerGeniusPanel, type TGStatus } from '@/components/TunerGeniusPanel';
+import { AmpWidget } from '@/components/AmpWidget';
 import { ScpPanel, type ScpResult } from '@/components/ScpPanel';
 import { FilterBuilder, type QueryFilter } from '@/components/FilterBuilder';
 import { AwardsPanel } from '@/components/AwardsPanel';
@@ -491,6 +492,14 @@ export default function App() {
   const [bandRx, setBandRx] = useState('20m');
   const [countries, setCountries] = useState<string[]>([]);
   const [rstLists, setRstLists] = useState<RSTLists>({ phone: [], cw: [], digital: [] });
+  // Refs for the report defaults. applyModePreset is called from long-lived
+  // closures — the global key handler is the one that bit us — whose dependency
+  // lists deliberately exclude the mode, so reading the state variables there
+  // gives whatever they were when that closure was built.
+  const modePresetsRef = useRef(modePresets);
+  useEffect(() => { modePresetsRef.current = modePresets; }, [modePresets]);
+  const rstListsRef = useRef(rstLists);
+  useEffect(() => { rstListsRef.current = rstLists; }, [rstLists]);
   const [rstSent, setRstSent] = useState('59');
   const [rstRcvd, setRstRcvd] = useState('59');
   const [grid, setGrid] = useState('');
@@ -570,6 +579,16 @@ export default function App() {
   // PGXL's OPERATE state comes from the radio when it reports the amp.
   const [ampSts, setAmpSts] = useState<any[]>([]);
   const [flexAmp, setFlexAmp] = useState<any>(null);
+  // Amplifier widget: whether it is shown, and which amp — "all", or one amp id.
+  // Several amps side by side make a wide widget, so an operator running two
+  // picks the one he watches while transmitting. Declared here because the poll
+  // below runs faster while the widget is open.
+  const [showAmpWidget, setShowAmpWidget] = useState(() => localStorage.getItem('opslog.showAmpWidget') !== '0');
+  const [ampWidgetSel, setAmpWidgetSel] = useState(() => localStorage.getItem('opslog.ampSel.widget') || 'all');
+  // Poll fast only while the amplifier widget is open: its meters must track TX
+  // the way the FlexRadio panel's do (400 ms), or the power reads seconds behind
+  // the transmission and looks like the app is struggling. The status-bar chips
+  // alone need nothing like that rate.
   useEffect(() => {
     let alive = true;
     const tick = () => Promise.all([
@@ -577,9 +596,9 @@ export default function App() {
       GetFlexState().catch(() => null),
     ]).then(([l, fx]: any[]) => { if (alive) { setAmpSts((l ?? []) as any[]); setFlexAmp(fx); } });
     tick();
-    const id = window.setInterval(tick, 2000);
+    const id = window.setInterval(tick, showAmpWidget ? 400 : 2000);
     return () => { alive = false; window.clearInterval(id); };
-  }, []);
+  }, [showAmpWidget]);
   // Multi-op "who's on air" widget: every operator's live status from the shared
   // MySQL logbook (freq/mode/version). Only polled on a MySQL logbook.
   type LiveStation = { operator: string; station: string; freq_hz: number; band: string; mode: string; online: boolean; version: string; age_sec: number };
@@ -871,6 +890,36 @@ export default function App() {
     return ALWAYS_TABS.includes(saved) ? saved : 'recent';
   });
   useEffect(() => { writeUiPref('opslog.activeTab', activeTab); }, [activeTab]);
+
+  // Main tab: how much width the LEFT pane gets, in percent. Clamped to 15..85
+  // so a pane can be made small but never dragged out of existence — recovering
+  // from that means finding a divider that is no longer on screen.
+  const [mainSplit, setMainSplit] = useState<number>(() => {
+    const n = parseFloat(localStorage.getItem('opslog.mainSplit') || '');
+    return Number.isFinite(n) && n >= 15 && n <= 85 ? n : 50;
+  });
+  useEffect(() => { writeUiPref('opslog.mainSplit', String(Math.round(mainSplit))); }, [mainSplit]);
+  const mainSplitRef = useRef<HTMLDivElement | null>(null);
+  const startMainSplitDrag = (e: React.PointerEvent) => {
+    e.preventDefault();
+    const host = mainSplitRef.current;
+    if (!host) return;
+    // Pointer capture on the divider, so dragging over a map keeps working —
+    // Leaflet would otherwise swallow the moves the moment the cursor entered it.
+    (e.currentTarget as HTMLElement).setPointerCapture(e.pointerId);
+    const onMove = (ev: PointerEvent) => {
+      const r = host.getBoundingClientRect();
+      if (r.width <= 0) return;
+      const pct = ((ev.clientX - r.left) / r.width) * 100;
+      setMainSplit(Math.min(85, Math.max(15, pct)));
+    };
+    const onUp = () => {
+      window.removeEventListener('pointermove', onMove);
+      window.removeEventListener('pointerup', onUp);
+    };
+    window.addEventListener('pointermove', onMove);
+    window.addEventListener('pointerup', onUp);
+  };
   // QSL Manager is a closable tab opened on demand from Tools → QSL Manager.
   const [qslTabOpen, setQslTabOpen] = useState(false);
   const [qslDesignerOpen, setQslDesignerOpen] = useState(false);
@@ -1341,7 +1390,7 @@ export default function App() {
   // county or a new park is not a DXCC state, it is another dimension of the
   // same spot — which is why the grid shows them as separate badges. Filtering
   // is an OR across all of them, as it already was for a worked callsign.
-  type SpotFilterKey = SpotStatusKey | 'new-pota' | 'new-county';
+  type SpotFilterKey = SpotStatusKey | 'new-pota' | 'new-county' | 'new-pfx';
   const [clusterStatusFilter, setClusterStatusFilter] = useState<Set<SpotFilterKey>>(() => lsSet<SpotFilterKey>('opslog.clusterStatusFilter'));
   // Mode filter chips. Empty set = show every mode. Categories map the
   // inferred per-spot mode onto SSB (phone) / CW / DATA (digital).
@@ -1437,7 +1486,7 @@ export default function App() {
   // Cached per-call slot status: "new" | "new-band" | "new-slot" | "worked".
   // Keyed by `${call}|${band}|${mode}` so two spots of the same call on
   // different slots don't share the same colour.
-  const [spotStatus, setSpotStatus] = useState<Record<string, { status: string; country?: string; continent?: string; worked_call?: boolean; new_county?: boolean; new_pota?: boolean }>>({});
+  const [spotStatus, setSpotStatus] = useState<Record<string, { status: string; country?: string; continent?: string; worked_call?: boolean; new_county?: boolean; new_pota?: boolean; new_pfx?: boolean; pfx?: string }>>({});
   // Live mirror of spotStatus so the incoming-spot buffer can tell which slots
   // still need resolving without re-subscribing the cluster:spot listener.
   const spotStatusRef = useRef(spotStatus);
@@ -2071,11 +2120,22 @@ export default function App() {
         setModePresets(l.modes);
         const names = l.modes.map((m) => m.name);
         setModes(names);
-        setMode((cur) => names.includes(cur) ? cur : names[0]);
+        // Resolve the mode we are ACTUALLY on, then take that mode's report.
-        const preset = l.modes.find((m) => m.name === mode) ?? l.modes[0];
+        //
-        if (preset && !rstUserEditedRef.current) {
+        // This used to read the `mode` state variable, which this callback
-          if (preset.default_rst_sent) setRstSent(preset.default_rst_sent);
+        // captures once (its dep list is empty) — so it was still the initial
-          if (preset.default_rst_rcvd) setRstRcvd(preset.default_rst_rcvd);
+        // 'SSB' — and fell back to l.modes[0], SSB again, when the lookup
+        // missed. An operator who launched OpsLog with the rig already in CW
+        // and did not touch the VFO got 59/59 and kept it: nothing else runs
+        // until the CAT state actually changes.
+        const cur = names.includes(modeRef.current) ? modeRef.current : names[0];
+        setMode(cur);
+        if (!rstUserEditedRef.current) {
+          const lists: RSTLists = { phone: (l as any).rst_phone ?? [], cw: (l as any).rst_cw ?? [], digital: (l as any).rst_digital ?? [] };
+          const p = l.modes.find((m) => m.name === cur);
+          const fallback = rstOptions(cur, lists)[0] || '';
+          setRstSent(p?.default_rst_sent || fallback);
+          setRstRcvd(p?.default_rst_rcvd || fallback);
         }
       }
     } catch {}
@@ -2135,8 +2195,9 @@ export default function App() {
     // Prefer the user's configured preset RST; otherwise fall back to the mode
     // category default (CW/RTTY/PSK → 599, phone → 59, digital → first option)
     // so switching SSB→CW flips 59→599 even without a configured preset.
-    const p = modePresets.find((x) => x.name === m);
+    // Read through the refs, never the state: see their declaration.
-    const fallback = rstOptions(m, rstLists)[0] || '';
+    const p = modePresetsRef.current.find((x) => x.name === m);
+    const fallback = rstOptions(m, rstListsRef.current)[0] || '';
     setRstSent(p?.default_rst_sent || fallback);
     setRstRcvd(p?.default_rst_rcvd || fallback);
   }
@@ -2409,6 +2470,8 @@ export default function App() {
                 worked_call: !!(r as any).worked_call,
                 new_county: !!(r as any).new_county,
                 new_pota: !!(r as any).new_pota,
+                new_pfx: !!(r as any).new_pfx,
+                pfx: (r as any).pfx,
               };
             }
             return next;
@@ -2864,6 +2927,8 @@ export default function App() {
               worked_call: !!(r as any).worked_call,
               new_county: !!(r as any).new_county,
               new_pota: !!(r as any).new_pota,
+              new_pfx: !!(r as any).new_pfx,
+              pfx: (r as any).pfx,
             };
           }
           return next;
@@ -2972,7 +3037,11 @@ export default function App() {
     setWb(null); // clear the Worked-before grid for the just-cleared callsign
     setLookupError('');
     rstUserEditedRef.current = false;
-    applyModePreset(mode);
+    // modeRef, not `mode`: resetEntry is reached from the global key handler,
+    // whose effect does not re-run on a mode change. Pressing ESC during a CW
+    // macro therefore reset the report using the mode as it was when that
+    // handler was built — 'SSB' — and turned 599 into 59.
+    applyModePreset(modeRef.current);
     setDetails((d) => ({
       ...d,
       state: '', cnty: '', address: '', lat: undefined, lon: undefined,
@@ -3719,8 +3788,10 @@ export default function App() {
   // The callsign field is WIDER than the fields around it, deliberately: it is
   // the one field always typed into, it carries the REC badges on its right, and
   // a long portable call (VK9/OH1ABC/MM) must stay readable as it is entered.
-  // The room comes from the RST pair, which never needs more than five
+  // It was widened by taking room from the RST pair — until a signal report of
-  // characters.
+  // "59+30" turned up, which is five characters plus its padding and no longer
+  // fitted. The RST fields are back to their original width; the callsign keeps
+  // the rest of the row.
   const callsignBlock = (
     <div className="flex flex-col w-56" data-esm="call">
       <Label className="flex items-center gap-2 h-3.5" style={{ marginBottom: 6 }}>
@@ -3869,12 +3940,12 @@ export default function App() {
     </div>
   );
   const rstTxBlock = (
-    <div className="flex flex-col w-16" data-esm="rsttx"><Label className="mb-1 h-3.5">{t('field.rstTx')}</Label>
+    <div className="flex flex-col w-20" data-esm="rsttx"><Label className="mb-1 h-3.5">{t('field.rstTx')}</Label>
       <Combobox value={rstSent} options={rstOptions(mode, rstLists)} commitOnType onChange={(v) => { setRstSent(v); rstUserEditedRef.current = true; }} />
     </div>
   );
   const rstRxBlock = (
-    <div className="flex flex-col w-16" data-esm="rstrx"><Label className="mb-1 h-3.5">{t('field.rstRx')}</Label>
+    <div className="flex flex-col w-20" data-esm="rstrx"><Label className="mb-1 h-3.5">{t('field.rstRx')}</Label>
       <Combobox value={rstRcvd} options={rstOptions(mode, rstLists)} commitOnType onChange={(v) => { setRstRcvd(v); rstUserEditedRef.current = true; }} />
     </div>
   );
@@ -4297,7 +4368,8 @@ export default function App() {
         const matches = clusterStatusFilter.has(st)
           || (!!e?.worked_call && clusterStatusFilter.has('worked'))
           || (!!e?.new_pota && clusterStatusFilter.has('new-pota'))
-          || (!!e?.new_county && clusterStatusFilter.has('new-county'));
+          || (!!e?.new_county && clusterStatusFilter.has('new-county'))
+          || (!!e?.new_pfx && clusterStatusFilter.has('new-pfx'));
         if (!matches) return false;
       }
       if (clusterHideWorked) {
@@ -4416,7 +4488,8 @@ export default function App() {
               // Same colours as the badges in the grid — a filter that does not
               // look like what it selects has to be learned twice.
               { k: 'new-pota'   as SpotFilterKey, label: 'NEW POTA',   cls: 'bg-success-muted text-success-muted-foreground border-success-border' },
-              { k: 'new-county' as SpotFilterKey, label: 'NEW COUNTY', cls: 'bg-info-muted text-info-muted-foreground border-info-border' },
+              { k: 'new-county' as SpotFilterKey, label: 'NEW COUNTY', cls: 'bg-success-muted text-success-muted-foreground border-success-border' },
+              { k: 'new-pfx'    as SpotFilterKey, label: 'NEW PFX',    cls: 'bg-caution-muted text-caution-muted-foreground border-caution-border' },
               // (no WORKED chip — use the "Hide worked" checkbox to drop dupes.)
             ]).map((s) => {
               const on = clusterStatusFilter.has(s.k);
@@ -4817,6 +4890,60 @@ export default function App() {
                 {showTuner && tgStatus.connected && <span className="absolute -top-0.5 -right-0.5 size-2 rounded-full bg-success" />}
               </button>
             )}
+            {/* Amplifier widget. With one amp the icon is a plain toggle; with
+                several it also carries a dropdown to choose which one the widget
+                shows (or All), since two amps stacked make a tall widget. */}
+            {ampSts.length > 0 && (
+              <div className="relative inline-flex">
+                <button
+                  type="button"
+                  onClick={() => { const v = !showAmpWidget; setShowAmpWidget(v); writeUiPref('opslog.showAmpWidget', v ? '1' : '0'); }}
+                  title={showAmpWidget ? t('ampw.hideHint') : t('ampw.showHint')}
+                  className={cn(
+                    'relative inline-flex items-center justify-center size-7 rounded-md border transition-colors',
+                    ampSts.length > 1 && 'rounded-r-none border-r-0',
+                    showAmpWidget ? 'border-success-border bg-success-muted text-success-muted-foreground hover:bg-success-muted'
+                      : 'border-border text-muted-foreground hover:bg-muted',
+                  )}
+                >
+                  <Flame className="size-4" />
+                  {showAmpWidget && ampSts.some((a: any) => a.spe?.connected || a.acom?.connected || a.pgxl?.connected || flexAmp?.amp_available) && (
+                    <span className="absolute -top-0.5 -right-0.5 size-2 rounded-full bg-success" />
+                  )}
+                </button>
+                {ampSts.length > 1 && (
+                  <DropdownMenu>
+                    <DropdownMenuTrigger asChild>
+                      <button type="button" title={t('ampw.pick')}
+                        className={cn('inline-flex items-center justify-center h-7 w-4 rounded-md rounded-l-none border transition-colors',
+                          showAmpWidget ? 'border-success-border bg-success-muted text-success-muted-foreground hover:bg-success-muted'
+                            : 'border-border text-muted-foreground hover:bg-muted')}>
+                        <ChevronDown className="size-3" />
+                      </button>
+                    </DropdownMenuTrigger>
+                    <DropdownMenuContent align="end" className="min-w-44">
+                      {[{ id: 'all', name: t('ampw.all') }, ...ampSts.map((a: any) => ({ id: a.id, name: a.name || a.id }))].map((o) => (
+                        <DropdownMenuItem key={o.id}
+                          onSelect={() => {
+                            setAmpWidgetSel(o.id);
+                            writeUiPref('opslog.ampSel.widget', o.id);
+                            // Picking an amp means "show me this one" — opening the
+                            // widget too saves a second click on a hidden one.
+                            if (!showAmpWidget) { setShowAmpWidget(true); writeUiPref('opslog.showAmpWidget', '1'); }
+                          }}>
+                          <span className="flex items-center gap-2 min-w-0">
+                            {ampWidgetSel === o.id
+                              ? <Check className="size-3.5 shrink-0 text-primary" />
+                              : <span className="size-3.5 shrink-0" />}
+                            <span className="truncate">{o.name}</span>
+                          </span>
+                        </DropdownMenuItem>
+                      ))}
+                    </DropdownMenuContent>
+                  </DropdownMenu>
+                )}
+              </div>
+            )}
             {scpEnabled && (
               <button
                 type="button"
@@ -5311,6 +5438,11 @@ export default function App() {
             prefix={prefix}
             operatorGrid={station.my_grid}
             remoteGrid={grid}
+            qth={qth}
+            name={name}
+            country={country}
+            comment={comment}
+            note={note}
             details={details}
             onChange={updateDetails}
             wb={wb}
@@ -5328,7 +5460,7 @@ export default function App() {
       {/* Reserved free space to the right. The WinKeyer CW keyer and/or the
           Digital Voice Keyer take this slot when enabled (Log4OM-style);
           otherwise it shows the QRZ profile photo. */}
-      {!compact && (chatShown || wkEnabled || dvkEnabled || lookupResult?.image_url || (showRotor && (rotatorHeading.enabled || dxPath)) || (showAntGenius && agEnabled) || (showTuner && tgEnabled) || (showScp && scpEnabled) || (showLiveStations && dbConn?.backend === 'mysql')) && (
+      {!compact && (chatShown || wkEnabled || dvkEnabled || lookupResult?.image_url || (showRotor && (rotatorHeading.enabled || dxPath)) || (showAntGenius && agEnabled) || (showTuner && tgEnabled) || (showAmpWidget && ampSts.length > 0) || (showScp && scpEnabled) || (showLiveStations && dbConn?.backend === 'mysql')) && (
         // relative + absolute inner (like the F1-F5 panel): a taller widget (e.g.
         // the DVK with Auto CQ) can't grow the row — the row height stays set by
         // the entry strip and each widget fills that height, scrolling inside.
@@ -5415,6 +5547,19 @@ export default function App() {
               />
             </div>
           )}
+          {showAmpWidget && ampSts.length > 0 && (
+            // One column per amplifier shown, so two amps stand side by side
+            // rather than making the widget twice as tall as the dock row.
+            <div className="shrink-0 min-h-0"
+              style={{ width: `${Math.min(ampWidgetSel === 'all' ? ampSts.length : 1, 3) * 250 + 20}px` }}>
+              <AmpWidget
+                amps={ampSts}
+                flex={flexAmp}
+                sel={ampWidgetSel}
+                onClose={() => { setShowAmpWidget(false); writeUiPref('opslog.showAmpWidget', '0'); }}
+              />
+            </div>
+          )}
           {showTuner && tgEnabled && (
             <div className="w-[230px] shrink-0 min-h-0">
               <TunerGeniusPanel
@@ -6011,8 +6156,23 @@ export default function App() {
               {/* Two configurable panes (per-profile, Settings → Main view).
                   Each side shows one of: great-circle map, locator map, cluster
                   or worked-before. */}
-              <div className="grid grid-cols-2 grid-rows-1 gap-2 h-full min-h-0 p-2">
+              {/* The divider is draggable: a map and a cluster list want very
+                  different widths, and which one deserves the room changes with
+                  what the operator is doing. The share is persisted (portable),
+                  and a double-click puts it back to even. */}
+              <div ref={mainSplitRef} className="grid grid-rows-1 gap-2 h-full min-h-0 p-2"
+                style={{ gridTemplateColumns: `${mainSplit}fr 6px ${100 - mainSplit}fr` }}>
                 <div className="min-h-0 min-w-0 flex">{renderMainPane(mainPaneLeft)}</div>
+                <div
+                  role="separator"
+                  aria-orientation="vertical"
+                  title={t('main.splitTip')}
+                  onPointerDown={startMainSplitDrag}
+                  onDoubleClick={() => setMainSplit(50)}
+                  className="group relative cursor-col-resize flex items-center justify-center -mx-1 px-1"
+                >
+                  <span className="h-10 w-1 rounded-full bg-border group-hover:bg-primary transition-colors" />
+                </div>
                 <div className="min-h-0 min-w-0 flex">{renderMainPane(mainPaneRight)}</div>
               </div>
             </TabsContent>

frontend/src/components/AmpCard.tsx

@@ -51,11 +51,14 @@ type Amp = { id: string; name: string; type?: string; spe?: any; acom?: any; pgx
 
 export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string, v?: any) => string }) {
   // Peak-hold so the jittery VITA-49 meters read steadily (own ref per card).
+  // One second: the same window as the docked widget, so the two never show
+  // different figures for the same amplifier, and neither trails the end of a
+  // transmission long enough to look like lag.
   const peak = useRef<Record<string, { v: number; t: number }>>({});
   const peakHold = (key: string, val: number) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > 1000) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
@@ -73,9 +76,12 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
               spe.operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
             {spe.operate ? 'OPERATE' : 'STANDBY'}
           </button>
+          {/* Power ON pulses RTS then DTR — it must stay clickable while the amp
+              is off (no status = not "connected"), and serial only. */}
           <div className="inline-flex rounded-lg overflow-hidden border-2 border-success/70">
-            <button type="button" disabled={!spe.connected}
+            <button type="button" disabled={!(spe.connected || spe.transport === 'serial')}
               onClick={() => AmpPower(amp.id, true).catch(() => {})}
+              title={spe.transport === 'serial' ? 'Power on (RTS then DTR pulse)' : 'Power-on needs the serial RTS/DTR lines — not available over a network bridge'}
               className="px-3 py-2 text-sm font-bold bg-card text-success hover:bg-success/15 disabled:opacity-30">ON</button>
             <button type="button" disabled={!spe.connected}
               onClick={() => AmpPower(amp.id, false).catch(() => {})}
@@ -177,9 +183,6 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
             operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
           {operate ? 'OPERATE' : 'STANDBY'}
         </button>
-        <span className="text-xs text-muted-foreground">
-          {operate ? t('flxp.ampInLine') : t('flxp.ampBypassed')}
-        </span>
         {(pg.host || pg.connected) && (
           <label className="flex items-center gap-1.5 text-xs" title={pg.connected ? t('flxp.pgConnected') : (pg.last_error || t('flxp.pgOffline'))}>
             <span className={cn('size-1.5 rounded-full', pg.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
@@ -208,6 +211,11 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
         const amps = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
           && !/^(RL|DRV)$/i.test((m.name || '').trim()));
         if (amps.length === 0) return null;
+        // Power comes from the radio's meter stream and nothing else. The
+        // amplifier also reports a "peakfwd", and using it was a mistake twice
+        // over: it is a latched maximum that is never reset, and it survives in
+        // the last-known status after the amp disconnects — so it claimed
+        // 1350 W from an old transmission while the radio was putting out 10.
         return (
           <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
             {amps.map((m) => {

frontend/src/components/AmpWidget.tsx

@@ -0,0 +1,281 @@
+import { useRef } from 'react';
+import { Flame, X, Power } from 'lucide-react';
+import { cn } from '@/lib/utils';
+import { useI18n } from '@/lib/i18n';
+import { MeterBar } from '@/components/MeterBar';
+import { AmpOperate, AmpPower, AmpPowerLevel, AmpFanMode, FlexAmpOperate } from '../../wailsjs/go/main/App';
+
+// AmpWidget — the docked amplifier widget, the compact counterpart of AmpCard
+// (which is the full-size card shown in the FlexRadio panel and Station
+// Control). It covers all three families, since an operator running an SPE and
+// a PowerGenius wants one widget, not two:
+//   • SPE Expert  — OPERATE, power ON/OFF, L/M/H, live power / SWR / temp
+//   • ACOM        — OPERATE, power ON/OFF, live power / SWR / temp
+//   • PowerGenius — OPERATE and meters ride on the FlexRadio, fan mode on GSCP
+// With several amplifiers configured the caller passes a selection ("all" or an
+// amp id) chosen from the toolbar icon's dropdown.
+
+type Amp = { id: string; name: string; type?: string; spe?: any; acom?: any; pgxl?: any };
+
+// Full-scale watts for the output bar, from the model string.
+function maxW(model?: string, fallback = 1300): number {
+  const m = (model || '').toUpperCase();
+  if (m.includes('20K') || m.includes('2K')) return 2000;
+  if (m.includes('15K')) return 1500;
+  if (m.includes('13K')) return 1300;
+  return fallback;
+}
+
+function swrColour(swr?: number): string {
+  if (!swr || swr <= 0) return 'text-muted-foreground';
+  if (swr <= 1.5) return 'text-success';
+  if (swr <= 2.0) return 'text-warning';
+  return 'text-danger';
+}
+
+// PowerMeter — the output-power LED bar that closes each column, straight under
+// the controls (no filler above it: pushed to the bottom it left a band of dead
+// space in the middle of the column). Uses the app-wide MeterBar, compact size,
+// so it reads exactly like the meters on the rig panels.
+function PowerMeter({ label, watts, maxWatts }: { label: string; watts: number; maxWatts: number }) {
+  return (
+    <MeterBar compact label={label} value={watts} unit="W" lo={0} hi={maxWatts}
+      display={`${Math.round(watts)} W`}
+      segColor={(f) => (f > 0.9 ? '#dc2626' : f > 0.75 ? '#f59e0b' : '#ea580c')} />
+  );
+}
+
+// usePeakHold keeps the highest reading seen for a short window, so a reading
+// sampled between two syllables doesn't collapse the meter. `live` is the key
+// part: pass false the moment the carrier drops and the held value is thrown
+// away at once — holding it there made releasing the PTT look like a five
+// second lag, which read as the whole app being slow.
+function usePeakHold(windowMs = 1000) {
+  const peak = useRef<Record<string, { v: number; t: number }>>({});
+  return (key: string, val: number, live = true) => {
+    if (!live) { delete peak.current[key]; return val; }
+    const now = Date.now();
+    const p = peak.current[key];
+    if (!p || val >= p.v || now - p.t > windowMs) { peak.current[key] = { v: val, t: now }; return val; }
+    return p.v;
+  };
+}
+
+// Stat — one small labelled figure (power, SWR, temperature).
+function Stat({ label, value, className }: { label: string; value: string; className?: string }) {
+  return (
+    <div className="rounded-lg border border-border bg-card/70 px-1.5 py-1 text-center">
+      <div className="text-[9px] uppercase tracking-wider text-muted-foreground leading-tight">{label}</div>
+      <div className={cn('text-sm font-bold font-mono leading-tight', className ?? 'text-foreground/80')}>{value}</div>
+    </div>
+  );
+}
+
+// OperateButton — the STANDBY/OPERATE toggle, identical in behaviour across the
+// three families (only where the state comes from differs).
+function OperateButton({ operate, disabled, onClick, t }: {
+  operate: boolean; disabled: boolean; onClick: () => void; t: (k: string, v?: any) => string;
+}) {
+  return (
+    <button type="button" disabled={disabled} onClick={onClick}
+      className={cn('w-full inline-flex items-center justify-center gap-1.5 rounded-lg text-xs font-bold py-1.5 border transition-all active:scale-[0.98] disabled:opacity-40',
+        operate
+          ? 'bg-gradient-to-b from-amber-400 to-amber-600 text-white border-amber-300/60 shadow-[0_0_9px_rgba(245,158,11,0.45)]'
+          : 'bg-card text-muted-foreground border-border hover:bg-muted hover:text-foreground')}>
+      <Power className="size-3.5" />
+      {operate ? t('ampw.operate') : t('ampw.standby')}
+    </button>
+  );
+}
+
+// AmpBlock — one amplifier inside the widget.
+function AmpBlock({ amp, flex, showName, t }: {
+  amp: Amp; flex: any; showName: boolean; t: (k: string, v?: any) => string;
+}) {
+  const spe = amp.spe, acom = amp.acom;
+  const hold = usePeakHold();
+
+  if (spe || acom) {
+    const s = spe || acom;
+    // The amp reports zero watts on receive, so its TX flag clears the meter as
+    // soon as the operator lets go — and the radio's own flag, when we have one,
+    // gets there first (the amp is polled on its own slower cycle).
+    const txing = typeof flex?.transmitting === 'boolean' ? flex.transmitting : s.tx !== false;
+    const w = hold('w', Number(spe ? s.output_w : s.fwd_w) || 0, txing);
+    const swr = Number(spe ? s.swr_ant : s.swr) || 0;
+    const hi = spe ? maxW(s.model) : (Number(s.max_w) || 800);
+    // Power ON drives the remote-on control lines, so it stays available while
+    // the amplifier is off and reporting nothing — but only over a serial link.
+    const canPowerOn = spe ? (s.connected || s.transport === 'serial') : (s.port_open && s.transport === 'serial');
+    return (
+      <div className="h-full flex flex-col gap-1.5">
+        {showName && (
+          <div className="flex items-center gap-1.5">
+            <span className={cn('size-1.5 rounded-full shrink-0', s.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
+            <span className="text-[10px] font-bold uppercase tracking-wider truncate">{amp.name || (spe ? 'SPE' : 'ACOM')}</span>
+            {s.connected && s.band && <span className="ml-auto text-[9px] text-muted-foreground shrink-0">{s.band}</span>}
+          </div>
+        )}
+        <OperateButton operate={!!s.operate} disabled={!s.connected} t={t}
+          onClick={() => AmpOperate(amp.id, !s.operate).catch(() => {})} />
+        <div className="flex gap-1.5">
+          <button type="button" disabled={!canPowerOn}
+            onClick={() => AmpPower(amp.id, true).catch(() => {})}
+            className="flex-1 rounded-lg border border-success/60 bg-card py-1 text-[11px] font-bold text-success hover:bg-success/15 disabled:opacity-30">
+            {t('ampw.on')}
+          </button>
+          <button type="button" disabled={!s.connected}
+            onClick={() => AmpPower(amp.id, false).catch(() => {})}
+            className="flex-1 rounded-lg border border-danger/60 bg-card py-1 text-[11px] font-bold text-danger hover:bg-danger/15 disabled:opacity-30">
+            {t('ampw.off')}
+          </button>
+        </div>
+        {/* Output level — SPE only; an ACOM has no L/M/H over CAT. */}
+        {spe && (
+          <div className="grid grid-cols-3 gap-1">
+            {(['L', 'M', 'H'] as const).map((lvl) => {
+              const active = (s.power_level || '').trim().toUpperCase() === lvl;
+              return (
+                <button key={lvl} type="button" disabled={!s.connected}
+                  onClick={() => AmpPowerLevel(amp.id, lvl).catch(() => {})}
+                  className={cn('rounded-md border py-0.5 text-[10px] font-bold transition-colors disabled:opacity-30',
+                    active ? 'bg-primary text-primary-foreground border-primary' : 'bg-card text-muted-foreground border-border hover:bg-muted')}>
+                  {t(`ampw.lvl${lvl}`)}
+                </button>
+              );
+            })}
+          </div>
+        )}
+        {s.connected ? (
+          <div className="grid grid-cols-3 gap-1">
+            <Stat label={t('ampw.pwr')} value={`${Math.round(w)}`} />
+            <Stat label={t('ampw.swr')} value={swr > 0 ? swr.toFixed(1) : '—'} className={swrColour(swr)} />
+            <Stat label={t('ampw.temp')} value={`${Number(s.temp_c) || 0}°`} />
+          </div>
+        ) : (
+          <div className="text-[10px] text-center text-muted-foreground italic py-1">{t('ampw.offline')}</div>
+        )}
+        {(s.warnings || s.alarms || s.err_text) && (
+          <div className="rounded-md border border-danger-border bg-danger-muted text-danger-muted-foreground text-[9px] px-1.5 py-0.5 text-center break-words">
+            {s.err_text || `${s.warnings || ''} ${s.alarms || ''}`.trim()}
+          </div>
+        )}
+        <PowerMeter label={t('flxp.outputPower')} watts={s.connected ? w : 0} maxWatts={hi} />
+      </div>
+    );
+  }
+
+  // PowerGenius XL: OPERATE and the meters come from the radio when the Flex
+  // reports the amp; the fan mode rides on our own GSCP link.
+  const pg = amp.pgxl || {};
+  const viaFlex = !!flex?.amp_available;
+  const operate = viaFlex ? !!flex?.amp_operate : !!pg.operate;
+  const connected = !!pg.connected || viaFlex;
+  const fault = flex?.amp_fault;
+  const meters = ((flex?.meters as any[]) || []).filter((m) => (m.src || '').toUpperCase().includes('AMP'));
+  const meter = (re: RegExp) => meters.find((m) => re.test((m.name || '').trim()));
+  const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
+  const fwd = meter(/^fwd|pwr/i);
+  const flexW = fwd ? (/dbm/i.test(fwd.unit || '') ? dbmToW(fwd.value) : fwd.value) : 0;
+  // Whether there is power is the RADIO's transmit flag: it flips the instant
+  // the PTT does, where the amplifier's own status poll answers a second and a
+  // half late and holds TRANSMIT past the carrier.
+  //
+  // How MUCH is the live reading — the radio's meter stream, or the amp's own
+  // forward figure when there is no Flex. NOT the amp's "peakfwd": that is a
+  // latched maximum which is never reset AND survives in the last-known status
+  // after the amp disconnects, so it reported 1350 W from an old transmission
+  // while the radio was putting out 10 W into a disconnected amplifier.
+  const txing = typeof flex?.transmitting === 'boolean'
+    ? flex.transmitting
+    : fwd ? flexW >= 1 : /TRANSMIT/i.test(pg.state || '');
+  const liveW = flexW > 0 ? flexW : (pg.connected ? Number(pg.fwd_w) || 0 : 0);
+  const fwdW = hold('fwd', txing ? liveW : 0, txing);
+  const id = meter(/^ID$|current/i);
+  // Live drain current, for the same reason: peak_id latches like peak_w.
+  const idA = id ? Number(id.value) : (txing ? Number(pg.id) || undefined : 0);
+  const temp = meter(/temp/i);
+  const tempC = pg.temperature > 0 ? pg.temperature : (temp ? temp.value : undefined);
+
+  return (
+    <div className="h-full flex flex-col gap-1.5">
+      {showName && (
+        <div className="flex items-center gap-1.5">
+          <span className={cn('size-1.5 rounded-full shrink-0', connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
+          <span className="text-[10px] font-bold uppercase tracking-wider truncate">{amp.name || 'PGXL'}</span>
+        </div>
+      )}
+      <OperateButton operate={operate} disabled={!connected} t={t}
+        onClick={() => (viaFlex ? FlexAmpOperate(!operate) : AmpOperate(amp.id, !operate)).catch(() => {})} />
+      {connected ? (
+        <div className="grid grid-cols-3 gap-1">
+          <Stat label={t('ampw.pwr')} value={`${Math.round(fwdW)}`} />
+          <Stat label={t('ampw.id')} value={idA != null ? idA.toFixed(1) : '—'} />
+          <Stat label={t('ampw.temp')} value={tempC != null ? `${Math.round(tempC)}°` : '—'} />
+        </div>
+      ) : (
+        <div className="text-[10px] text-center text-muted-foreground italic py-1">{t('ampw.offline')}</div>
+      )}
+      {(pg.host || pg.connected) && (
+        <select
+          disabled={!pg.connected}
+          value={(pg.fan_mode || 'CONTEST').toUpperCase()}
+          onChange={(e) => AmpFanMode(amp.id, e.target.value).catch(() => {})}
+          title={t('ampw.fan')}
+          className="w-full h-7 rounded-md border border-border bg-card px-1.5 text-[10px] font-semibold outline-none focus:border-warning disabled:opacity-40">
+          <option value="STANDARD">{t('flxp.fanStandard')}</option>
+          <option value="CONTEST">{t('flxp.fanContest')}</option>
+          <option value="BROADCAST">{t('flxp.fanBroadcast')}</option>
+        </select>
+      )}
+      {fault && fault !== 'NONE' && (
+        <div className="rounded-md border border-danger-border bg-danger-muted text-danger-muted-foreground text-[9px] px-1.5 py-0.5 text-center break-words">
+          {t('flxp.fault')}: {fault}
+        </div>
+      )}
+      <PowerMeter label={t('flxp.outputPower')} watts={connected ? fwdW : 0} maxWatts={2000} />
+    </div>
+  );
+}
+
+export function AmpWidget({ amps, flex, sel, onClose }: {
+  amps: Amp[];
+  flex: any;
+  sel: string; // "all" or an amp id
+  onClose: () => void;
+}) {
+  const { t } = useI18n();
+  // An id that no longer matches (the amp was removed in Settings) falls back to
+  // showing everything rather than an empty widget.
+  const shown = sel === 'all' ? amps : (amps.filter((a) => a.id === sel).length ? amps.filter((a) => a.id === sel) : amps);
+  const anyOnline = shown.some((a) => a.spe?.connected || a.acom?.connected || a.pgxl?.connected || flex?.amp_available);
+  const title = shown.length === 1 ? (shown[0].name || t('ampw.title')) : t('ampw.title');
+
+  return (
+    <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
+      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/40 shrink-0">
+        <Flame className={cn('size-4', anyOnline ? 'text-warning drop-shadow-[0_0_3px_rgba(245,158,11,0.55)]' : 'text-muted-foreground')} />
+        <span className="text-xs font-bold uppercase tracking-[0.18em] text-foreground/80 truncate">{title}</span>
+        <span className="flex-1" />
+        <button type="button" onClick={onClose} className="ml-1 text-muted-foreground hover:text-foreground transition-colors" title={t('ampw.close')}>
+          <X className="size-3.5" />
+        </button>
+      </div>
+      {/* Several amplifiers sit SIDE BY SIDE, one column each: stacked, two amps
+          made a widget taller than the dock row and both ended up half hidden. */}
+      <div className="flex-1 min-h-0 overflow-y-auto p-2.5">
+        {shown.length === 0 ? (
+          <div className="text-[11px] text-center text-muted-foreground italic py-2">{t('ampw.none')}</div>
+        ) : (
+          <div className="grid gap-2.5 h-full" style={{ gridTemplateColumns: `repeat(${shown.length}, minmax(0, 1fr))` }}>
+            {shown.map((a, i) => (
+              <div key={a.id} className={cn(i > 0 && 'pl-2.5 border-l border-border/50')}>
+                <AmpBlock amp={a} flex={flex} showName={shown.length > 1} t={t} />
+              </div>
+            ))}
+          </div>
+        )}
+      </div>
+    </div>
+  );
+}

frontend/src/components/AwardEditor.tsx

@@ -33,7 +33,7 @@ export type AwardDef = {
   code: string; name: string; description?: string; valid?: boolean; protected?: boolean;
   url?: string; download_url?: string; ref_url?: string; valid_from?: string; valid_to?: string; alias?: string;
   ref_display?: string; // grid column shows: ref | name | both
-  type?: string; field: string; match_by?: string; exact_match?: boolean; pattern: string;
+  type?: string; field: string; match_by?: string; exact_match?: boolean; one_ref_per_qso?: boolean; pattern: string;
   leading_str?: string; trailing_str?: string; dynamic?: boolean;
   or_rules?: AwardOrRule[];
   dxcc_filter: number[] | null; valid_bands?: string[]; valid_modes?: string[]; emission?: string[];
@@ -227,7 +227,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
   };
   type Explanation = {
     code: string; in_scope: boolean; scope_error?: string; predefined: boolean;
-    ref_count: number; steps: Step[]; manual?: string[]; result: string[];
+    ref_count: number; steps: Step[]; manual?: string[]; ambiguous?: string[]; result: string[];
   };
   type TestRow = { qso: any; explanation: Explanation };
   const [testCall, setTestCall] = useState('');
@@ -554,6 +554,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                         </div>
                       </Field2>
                       <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]"><Checkbox checked={!!cur.exact_match} onCheckedChange={(c) => patch({ exact_match: !!c })} /> {t('awed.exactMatch')}</label>
+                      <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]" title={t('awed.oneRefHint')}><Checkbox checked={!!cur.one_ref_per_qso} onCheckedChange={(c) => patch({ one_ref_per_qso: !!c })} /> {t('awed.oneRef')}</label>
                       <Field2 label={t('awed.patternRegex')}><Input className="h-8 font-mono text-xs" value={cur.pattern} onChange={(e) => patch({ pattern: e.target.value })} placeholder={t('awed.patternPlaceholder')} /></Field2>
                       <div className="grid grid-cols-2 gap-3">
                         <Field2 label={t('awed.leadingString')}><Input className="h-8 font-mono text-xs" value={cur.leading_str ?? ''} onChange={(e) => patch({ leading_str: e.target.value })} /></Field2>
@@ -708,6 +709,13 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                                   )}
                                 </div>
                               ))}
+                              {(ex.ambiguous ?? []).length > 0 && (
+                                <div className="px-3 py-2 text-xs">
+                                  <span className="font-semibold uppercase text-[10px] tracking-wide text-warning">{t('awed.testAmbiguous')}</span>{' '}
+                                  <span className="font-mono text-warning">{(ex.ambiguous ?? []).join(', ')}</span>{' '}
+                                  <span className="text-muted-foreground">{t('awed.testAmbiguousHint')}</span>
+                                </div>
+                              )}
                               {(ex.manual ?? []).length > 0 && (
                                 <div className="px-3 py-2 text-xs">
                                   <span className="font-semibold uppercase text-[10px] tracking-wide">{t('awed.testManual')}</span>{' '}

frontend/src/components/AwardsPanel.tsx

@@ -69,6 +69,9 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   const [awardList, setAwardList] = useState<AwardListItem[]>([]);
   // Computed results are cached per award code — each award is scanned only the
   // first time it's selected (or when explicitly rescanned).
+  // Keyed by "CODE|MODECLASS": the same award computed for CW and for all modes
+  // are different results, and caching them under one key showed the previous
+  // mode’s numbers after switching.
   const [byCode, setByCode] = useState<Record<string, AwardResult>>({});
   const [loading, setLoading] = useState(false);
   const [err, setErr] = useState('');
@@ -119,13 +122,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   // Compute one award (cached). force=true bypasses the cache (Rescan).
   async function compute(code: string, force = false) {
     if (!code) return;
-    if (!force && byCode[code]) { setSelected(code); return; }
+    const key = `${code}|${modeFilter}`;
+    if (!force && byCode[key]) { setSelected(code); return; }
     setSelected(code);
     setLoading(true);
     setErr('');
     try {
-      const r = (await GetAward(code)) as any as AwardResult;
+      const r = (await GetAward(code, modeFilter === 'all' ? '' : modeFilter)) as any as AwardResult;
-      setByCode((m) => ({ ...m, [code]: r }));
+      setByCode((m) => ({ ...m, [key]: r }));
     } catch (e: any) {
       setErr(String(e?.message ?? e));
     } finally {
@@ -149,7 +153,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   }
   useEffect(() => { loadList(); }, []);
 
-  const current = byCode[selected];
+  const current = byCode[`${selected}|${modeFilter}`];
+  // Recompute when the mode class changes: the bands, counts and confirmations
+  // all describe the selected mode, so they cannot be filtered client-side.
+  useEffect(() => { if (selected) compute(selected); /* eslint-disable-next-line react-hooks/exhaustive-deps */ }, [modeFilter]);
 
   // Bands relevant to the selected award, used by BOTH the grid and the stats
   // matrix so neither is padded with bands the award doesn't use. Rule: the
@@ -292,7 +299,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
         <div className="flex-1 overflow-auto">
           {err && <div className="p-3 text-xs text-destructive">{err}</div>}
           {awardList.map((a) => {
-            const r = byCode[a.code];
+            const r = byCode[`${a.code}|${modeFilter}`];
             return (
               <button
                 key={a.code}
@@ -539,7 +546,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
       </div>
 
       {cell && current && (
-        <CellQSOModal code={current.code} cell={cell} onClose={() => setCell(null)} />
+        <CellQSOModal code={current.code} cell={cell} modeClass={modeFilter === 'all' ? '' : modeFilter} onClose={() => setCell(null)} />
       )}
       {showMissing && current && (
         <MissingQSOModal code={current.code} name={current.name} onClose={() => setShowMissing(false)} onEditQSO={onEditQSO} />
@@ -724,17 +731,17 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
 }
 
 // CellQSOModal lists the QSOs behind one award-grid cell (reference × band).
-function CellQSOModal({ code, cell, onClose }: { code: string; cell: { ref: string; band: string; name?: string }; onClose: () => void }) {
+function CellQSOModal({ code, cell, modeClass, onClose }: { code: string; cell: { ref: string; band: string; name?: string }; modeClass: string; onClose: () => void }) {
   const { t } = useI18n();
   const [qsos, setQsos] = useState<any[]>([]);
   const [loading, setLoading] = useState(true);
   useEffect(() => {
     setLoading(true);
-    AwardCellQSOs(code, cell.ref, cell.band)
+    AwardCellQSOs(code, cell.ref, cell.band, modeClass)
       .then((r) => setQsos((r ?? []) as any))
       .catch(() => setQsos([]))
       .finally(() => setLoading(false));
-  }, [code, cell.ref, cell.band]);
+  }, [code, cell.ref, cell.band, modeClass]);
 
   const fmt = (s: any) => { const d = new Date(s); return isNaN(d.getTime()) ? '' : d.toISOString().slice(0, 16).replace('T', ' '); };
 

frontend/src/components/ClusterGrid.tsx

@@ -53,6 +53,8 @@ export type SpotStatusEntry = {
   worked_call?: boolean;
   new_county?: boolean;
   new_pota?: boolean;
+  new_pfx?: boolean;
+  pfx?: string;
 };
 
 type Props = {
@@ -99,47 +101,42 @@ function statusFor(p: any): SpotStatusEntry | undefined {
   ];
 }
 
-// statusBadge maps a resolved spot status to a short labelled badge for the
+// Spot status is shown by COLOURING THE TEXT, never by a pill or a badge.
-// Status column, using the same colours as the per-cell fills (NEW DXCC =
+//
-// call cell, NEW BAND = band cell, NEW SLOT = mode cell). Returns null when
+// The pills were dropped: a rounded box has its own height and padding, so it
-// there's nothing notable to show.
+// sat off the row's baseline and the callsign inside it no longer lined up with
-type Badge = { text: string; fg: string; bg: string; bd: string };
+// the plain callsigns above and below. A whole column of them read as chrome
+// rather than as data. Same reasoning — and the same semantic tokens — as the
+// Y/N/R QSL columns in lib/qslStatus.ts.
+//
+// Which cell is coloured IS the message, so one colour is enough for all three:
+//
+//   yellow call → new DXCC     yellow band → new band     yellow mode → new mode
+//   blue call   → already worked
+const NEW = 'var(--warning)'; // yellow: something here is new
+const WKD = 'var(--info)';    // blue: this callsign is already in the log
 
-// tok builds a badge from a semantic status token (success/warning/caution/
+// cellText renders a cell value in an optional colour. An empty value keeps the
-// danger/info/neutral) so the colours adapt to every theme via CSS variables,
+// muted dash the grid used before, so blank cells still read as "nothing here"
-// instead of the hard-coded light-theme pastels that looked wrong in dark mode.
+// rather than as a gap.
-function tok(name: string, text: string): Badge {
+function cellText(value: any, color: string | null): any {
-  if (name === 'neutral') return { text, fg: 'var(--muted-foreground)', bg: 'var(--muted)', bd: 'var(--border)' };
-  return { text, fg: `var(--${name}-muted-foreground)`, bg: `var(--${name}-muted)`, bd: `var(--${name}-border)` };
-}
-
-// cellChip wraps a Band/Mode cell value in a small rounded pill (same look as the
-// Status badges) when the slot is notable, instead of flooding the whole cell with
-// a heavy muted fill that turned into an ugly olive block on dark themes. `name` is
-// null → plain text, no pill.
-function cellChip(value: any, name: string | null): any {
   const txt = value === undefined || value === null || value === '' ? '' : String(value);
-  if (!name) return txt || <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
+  if (!txt) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
-  // Inherit the column's font size (no fixed 9px / height) so a pill around a
+  return <span style={color ? { color, fontWeight: 700 } : undefined}>{txt}</span>;
-  // callsign stays the same size as the plain callsigns next to it — just tinted
-  // and rounded, not shrunk.
-  return (
-    <span style={{
-      display: 'inline-flex', alignItems: 'center', lineHeight: 1.1,
-      backgroundColor: `var(--${name}-muted)`, color: `var(--${name}-muted-foreground)`,
-      border: `1px solid var(--${name}-border)`, fontWeight: 700,
-      padding: '1px 6px', borderRadius: 999, whiteSpace: 'nowrap',
-    }}>{txt}</span>
-  );
 }
 
-function statusBadge(t: TFn, s: SpotStatusEntry | undefined): Badge | null {
+// statusColor is the colour for a resolved status in the Status column. County,
+// POTA and prefix keep their own tokens: they are orthogonal to the band/mode/
+// DXCC story and an operator filters on them separately.
+function statusColor(s: SpotStatusEntry | undefined): string | null {
   switch (s?.status) {
-    case 'new':      return tok('danger',  t('clg2.newDxcc'));
+    case 'new':
-    case 'new-band': return tok('warning', t('clg2.newBand'));
+    case 'new-band':
-    case 'new-mode': return tok('caution', t('clg2.newMode'));
+    case 'new-mode':
-    case 'new-slot': return tok('caution', t('clg2.newSlot'));
+    case 'new-slot':
-    default:         return s?.worked_call ? tok('neutral', t('clg2.wkdCall')) : null;
+      return NEW;
+    default:
+      return s?.worked_call ? WKD : null;
   }
 }
 
@@ -166,15 +163,12 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     headerName: t('clg2.c.call'), field: 'dx_call' as any, width: 120,
     defaultVisible: true,
     cellClass: 'font-mono',
-    // NEW DXCC → a danger pill around the call, consistent with the NEW BAND /
+    // NEW DXCC → yellow call. Already worked → blue call. Anything else keeps
-    // NEW MODE pills (same look, same tokens). Worked-call stays blue bold text;
+    // the theme's normal ink so ordinary callsigns don't shout.
-    // a plain spot inherits the theme's normal text colour so callsigns blend in
-    // with the rest of the row instead of always shouting a colour.
     cellRenderer: (p: any) => {
       const s = statusFor(p);
-      if (s?.status === 'new') return cellChip(p.value, 'danger');
+      const color = s?.status === 'new' ? NEW : s?.worked_call ? WKD : null;
-      const color = s?.worked_call ? 'var(--info)' : undefined;
+      return <span style={{ color: color ?? undefined, fontWeight: 700 }}>{p.value ?? ''}</span>;
-      return <span style={{ color, fontWeight: 700 }}>{p.value ?? ''}</span>;
     },
     tooltipValueGetter: (p: any) => {
       const s = statusFor(p);
@@ -185,9 +179,10 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     group: 'Spot', label: t('clg2.c.status'), colId: 'status',
     headerName: t('clg2.c.status'), width: 120, sortable: true,
     defaultVisible: true,
-    // Spells out the slot status as a text badge so NEW SLOT (and the others)
+    // Spells the status out in words so NEW SLOT (and the others) is obvious at
-    // is obvious at the row level, not just a single coloured cell. NEW COUNTY
+    // the row level, not just a single coloured cell — NEW SLOT in particular
-    // and NEW POTA are orthogonal, so they stack as extra badges.
+    // colours no cell at all, since neither the band nor the mode is new on its
+    // own. NEW COUNTY and NEW POTA are orthogonal, so they stack after it.
     valueGetter: (p: any) => {
       const s = statusFor(p);
       const parts: string[] = [];
@@ -198,25 +193,31 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
       else if (s?.worked_call) parts.push(t('clg2.wkdCall'));
       if (s?.new_county) parts.push(t('clg2.newCounty'));
       if (s?.new_pota) parts.push(t('clg2.newPota'));
+      if (s?.new_pfx) parts.push(t('clg2.newPfx'));
       return parts.join(' ');
     },
     cellRenderer: (p: any) => {
       const s = statusFor(p);
-      const badges: Badge[] = [];
+      const parts: { text: string; color: string }[] = [];
-      const b = statusBadge(t, s);
+      const main = statusColor(s);
-      if (b) badges.push(b);
+      if (main) {
-      if (s?.new_county) badges.push(tok('info', t('clg2.newCounty')));
+        const label = s?.status === 'new' ? t('clg2.newDxcc')
-      if (s?.new_pota) badges.push(tok('success', t('clg2.newPota')));
+          : s?.status === 'new-band' ? t('clg2.newBand')
-      if (badges.length === 0) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
+            : s?.status === 'new-mode' ? t('clg2.newMode')
+              : s?.status === 'new-slot' ? t('clg2.newSlot')
+                : t('clg2.wkdCall');
+        parts.push({ text: label, color: main });
+      }
+      if (s?.new_county) parts.push({ text: t('clg2.newCounty'), color: 'var(--success)' });
+      if (s?.new_pota) parts.push({ text: t('clg2.newPota'), color: 'var(--success)' });
+      if (s?.new_pfx) parts.push({ text: t('clg2.newPfx'), color: 'var(--caution)' });
+      if (parts.length === 0) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
       return (
-        <span style={{ display: 'flex', height: '100%', flexWrap: 'wrap', gap: 2, alignItems: 'center' }}>
+        <span style={{ whiteSpace: 'nowrap' }}>
-          {badges.map((bd, i) => (
+          {parts.map((pt, i) => (
-            <span key={i} style={{
+            <span key={i} style={{ color: pt.color, fontWeight: 700 }}>
-              display: 'inline-flex', alignItems: 'center', height: 15, lineHeight: 1,
+              {i > 0 ? ' · ' : ''}{pt.text}
-              backgroundColor: bd.bg, color: bd.fg, border: `1px solid ${bd.bd}`,
+            </span>
-              fontWeight: 700, fontSize: 9,
-              padding: '0 5px', borderRadius: 999, letterSpacing: 0.3, whiteSpace: 'nowrap',
-            }}>{bd.text}</span>
           ))}
         </span>
       );
@@ -249,8 +250,8 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     headerName: t('clg2.c.band'), field: 'band' as any, width: 75,
     defaultVisible: true,
     cellClass: 'font-mono',
-    // NEW BAND for this entity → small warning pill around the band text.
+    // NEW BAND for this entity → the band text turns yellow.
-    cellRenderer: (p: any) => cellChip(p.value, statusFor(p)?.status === 'new-band' ? 'warning' : null),
+    cellRenderer: (p: any) => cellText(p.value, statusFor(p)?.status === 'new-band' ? NEW : null),
     tooltipValueGetter: (p: any) => (statusFor(p)?.status === 'new-band' ? t('clg2.tipNewBand') : undefined),
   },
   {
@@ -263,7 +264,7 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     // for the entity. NEW SLOT means band AND mode were each worked before (just
     // not together), so highlighting the mode cell would wrongly imply "CW is new";
     // that case is signalled by the Status badge alone.
-    cellRenderer: (p: any) => cellChip(p.value, statusFor(p)?.status === 'new-mode' ? 'caution' : null),
+    cellRenderer: (p: any) => cellText(p.value, statusFor(p)?.status === 'new-mode' ? NEW : null),
     tooltipValueGetter: (p: any) => {
       const st = statusFor(p)?.status;
       if (st === 'new-mode') return t('clg2.tipNewMode');

frontend/src/components/DetailsPanel.tsx

@@ -1,5 +1,5 @@
 import { useEffect, useMemo, useState } from 'react';
-import { ComputeQSOAwardRefs } from '../../wailsjs/go/main/App';
+import { ComputeQSOAwardRefs, IsNewUSCounty } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { Label } from '@/components/ui/label';
 import { Checkbox } from '@/components/ui/checkbox';
@@ -53,6 +53,14 @@ interface Props {
   prefix: string;
   operatorGrid: string;   // station.my_grid — origin for bearing/distance
   remoteGrid: string;     // entry-strip Grid value — destination
+  // Entry-strip text fields. Live award detection matches on these too — a DARC
+  // DOK keys off QTH, not the address — and sending only the address meant such
+  // an award stayed silent until the QSO was logged.
+  qth?: string;
+  name?: string;
+  country?: string;
+  comment?: string;
+  note?: string;
   details: DetailsState;
   onChange: (patch: Partial<DetailsState>) => void;
   // Stats (F1) tab content: the worked-before matrix + optional QRZ image.
@@ -113,28 +121,57 @@ function numOrUndef(v: string): number | undefined {
   return isNaN(n) ? undefined : n;
 }
 
+// Column spans written out rather than built as `col-span-${n}`: Tailwind scans
+// for literal class names, so an interpolated one is never emitted.
+const SPAN_CLASS: Record<number, string> = {
+  1: '', 2: 'col-span-2', 3: 'col-span-3', 4: 'col-span-4', 5: 'col-span-5',
+  6: 'col-span-6', 7: 'col-span-7', 8: 'col-span-8', 9: 'col-span-9',
+  10: 'col-span-10', 11: 'col-span-11', 12: 'col-span-12',
+};
+
 // Compact field helper to keep the JSX dense.
-function Field({ label, span = 1, children }: { label: string; span?: 1 | 2 | 3 | 4 | 6; children: React.ReactNode }) {
+function Field({ label, span = 1, className, children }: { label: string; span?: number; className?: string; children: React.ReactNode }) {
   return (
-    <div className={cn('flex flex-col min-w-0', span === 2 && 'col-span-2', span === 3 && 'col-span-3', span === 4 && 'col-span-4', span === 6 && 'col-span-6')}>
+    <div className={cn('flex flex-col min-w-0', SPAN_CLASS[span], className)}>
       <Label className="mb-1">{label}</Label>
       {children}
     </div>
   );
 }
 
-export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
+export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
   const { t } = useI18n();
   const [internalOpen, setInternalOpen] = useState<TabName>('stats');
   const open = tab ?? internalOpen; // controlled when `tab` is provided
 
   // Live award detection: run the SAME engine used at log time over the current
-  // contact (callsign + looked-up address/state/zones) so award references the
+  // contact — callsign, the looked-up address/state/zones AND the entry-strip
-  // QSO will earn — e.g. WAPC matching "Beijing" inside the address — are
+  // text (QTH, name, country, comment, note, grid). Sending only the address was
-  // surfaced and auto-added the moment you enter a call or click a spot, instead
+  // a silent hole: a DARC DOK matches on QTH, so "Aachen" produced nothing here
-  // of only appearing after logging. Pickable matches are merged into award_refs
+  // while the award editor's Test tab, which passes the whole QSO, matched it.
+  // References the QSO will earn — WAPC matching "Beijing" inside the address,
+  // a DOK matching the town — are surfaced and auto-added the moment you enter a
+  // call or click a spot, instead of only appearing after logging. Pickable
+  // matches are merged into award_refs
   // (idempotent; award_refs is NOT a dependency, so removing one by hand sticks).
-  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean }>>([]);
+  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean; ambiguous?: boolean }>>([]);
+
+  // NEW badge on the county: the same question the cluster's NEW CTY badge
+  // answers, for the station being worked right now. Debounced because the
+  // county field is typed into as well as filled by the lookup.
+  const [newCounty, setNewCounty] = useState(false);
+  useEffect(() => {
+    const cnty = (details.cnty ?? '').trim();
+    if (!cnty) { setNewCounty(false); return; }
+    let alive = true;
+    const id = window.setTimeout(async () => {
+      try {
+        const isNew = await IsNewUSCounty(details.state ?? '', cnty);
+        if (alive) setNewCounty(!!isNew);
+      } catch { if (alive) setNewCounty(false); }
+    }, 300);
+    return () => { alive = false; window.clearTimeout(id); };
+  }, [details.state, details.cnty]);
   useEffect(() => {
     if (open !== 'awards' || !callsign.trim()) { setDetected([]); return; }
     const t = window.setTimeout(async () => {
@@ -142,6 +179,8 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const q: any = {
           callsign, band, mode,
           address: details.address ?? '', state: details.state ?? '', cnty: details.cnty ?? '',
+          qth: qth ?? '', name: name ?? '', country: country ?? '',
+          comment: comment ?? '', notes: note ?? '', grid: remoteGrid ?? '',
           cont: details.cont ?? '', dxcc: details.dxcc, cqz: details.cqz, ituz: details.ituz,
           qso_date: new Date().toISOString(),
         };
@@ -151,7 +190,9 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const have = new Set(cur.split(';').filter(Boolean));
         let next = cur;
         for (const r of all) {
-          if (!r.pickable) continue;
+          // An ambiguous candidate is offered, never auto-added: adding one would
+          // be the guess the award's "one reference per QSO" setting exists to refuse.
+          if (!r.pickable || r.ambiguous) continue;
           const entry = `${String(r.code).toUpperCase()}@${String(r.ref).toUpperCase()}`;
           if (!have.has(entry)) { next = next ? `${next};${entry}` : entry; have.add(entry); }
         }
@@ -160,7 +201,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
     }, 400);
     return () => window.clearTimeout(t);
     // eslint-disable-next-line react-hooks/exhaustive-deps
-  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, band, mode]);
+  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, qth, name, country, comment, note, remoteGrid, band, mode]);
   // Bearing/distance from operator's home grid to the remote station.
   // Recomputed only when either grid actually changes.
   const path = useMemo(() => {
@@ -227,14 +268,26 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
       )}
 
       {open === 'info' && (
-        <div className="grid grid-cols-6 gap-2 px-3 py-2.5">
+        <div className="grid grid-cols-12 gap-2 px-3 py-2.5">
-          <Field label={t('detp.statePref')}>
+          {/* Twelve columns, not six: the fields hold very different things. A US
+              county name is long, a CQ zone is two digits — on an even six-column
+              grid they were the same width, so the county truncated while the
+              zones sat mostly empty. */}
+          <Field label={t('detp.statePref')} span={2}>
             <Input value={details.state} onChange={(e) => onChange({ state: e.target.value })} />
           </Field>
-          <Field label={t('detp.county')}>
+          <Field label={t('detp.county')} span={4} className="relative">
-            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} />
+            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} className={cn(newCounty && 'pr-14')} />
+            {newCounty && (
+              <span
+                title={t('detp.newCountyTip')}
+                className="absolute right-1.5 bottom-1.5 rounded px-1.5 py-0.5 text-[10px] font-bold tracking-wide bg-success text-success-foreground pointer-events-none"
+              >
+                {t('detp.newCounty')}
+              </span>
+            )}
           </Field>
-          <Field label={t('detp.prefix')}>
+          <Field label={t('detp.prefix')} span={2}>
             <Input className="font-mono uppercase" value={prefix} readOnly tabIndex={-1} />
           </Field>
           <Field label={t('detp.cqZone')}>
@@ -248,7 +301,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
           {/* DXCC # closes the top row (next to the zones); Continent and
               Azimuth SP live in the main entry strip / bandeau. The long-path
               bearing and distances move to the row below. */}
-          <Field label={t('detp.dxcc')}>
+          <Field label={t('detp.dxcc')} span={2}>
             <Input
               readOnly
               tabIndex={-1}
@@ -257,40 +310,45 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
               placeholder="—"
             />
           </Field>
-          <Field label={t('detp.azimuthLp')}>
+          {/* The bearing and the two distances are read-only and hold at most
-            <Input
+              "12345 km", so they take a fixed width and the address — the one
-              readOnly
+              field here that is never wide enough — gets everything left over. */}
-              tabIndex={-1}
+          <div className="col-span-12 flex gap-2">
-              className="font-mono bg-muted/40 cursor-default"
+            <Field label={t('detp.azimuthLp')} className="w-20 shrink-0">
-              value={path ? fmtDeg(path.bearingLong) : ''}
+              <Input
-              placeholder="—"
+                readOnly
-            />
+                tabIndex={-1}
-          </Field>
+                className="font-mono bg-muted/40 cursor-default"
-          <Field label={t('detp.distanceSp')}>
+                value={path ? fmtDeg(path.bearingLong) : ''}
-            <Input
+                placeholder="—"
-              readOnly
+              />
-              tabIndex={-1}
+            </Field>
-              className="font-mono bg-muted/40 cursor-default"
+            <Field label={t('detp.distanceSp')} className="w-24 shrink-0">
-              value={path ? fmtKm(path.distanceShort) : ''}
+              <Input
-              placeholder="—"
+                readOnly
-            />
+                tabIndex={-1}
-          </Field>
+                className="font-mono bg-muted/40 cursor-default"
-          <Field label={t('detp.distanceLp')}>
+                value={path ? fmtKm(path.distanceShort) : ''}
-            <Input
+                placeholder="—"
-              readOnly
+              />
-              tabIndex={-1}
+            </Field>
-              className="font-mono bg-muted/40 cursor-default"
+            <Field label={t('detp.distanceLp')} className="w-24 shrink-0">
-              value={path ? fmtKm(path.distanceLong) : ''}
+              <Input
-              placeholder="—"
+                readOnly
-            />
+                tabIndex={-1}
-          </Field>
+                className="font-mono bg-muted/40 cursor-default"
-          <Field label={t('detp.address')} span={3}>
+                value={path ? fmtKm(path.distanceLong) : ''}
-            <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
+                placeholder="—"
-          </Field>
+              />
-          <Field label={t('detp.qslMessage')} span={3}>
+            </Field>
+            <Field label={t('detp.address')} className="flex-1 min-w-0">
+              <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
+            </Field>
+          </div>
+          <Field label={t('detp.qslMessage')} span={7}>
             <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
           </Field>
-          <Field label={t('detp.qslVia')} span={2}>
+          <Field label={t('detp.qslVia')} span={5}>
             <Input value={details.qsl_via} onChange={(e) => onChange({ qsl_via: e.target.value })} />
           </Field>
         </div>
@@ -305,10 +363,37 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
             fieldValues={{ state: details.state ?? '', cnty: details.cnty ?? '' }}
             heightClass="flex-1 min-h-0"
           />
-          {detected.length > 0 && (
+          {/* Ambiguous candidates: the award allows one reference per QSO and
+              several matched, so none was kept. Click one to settle it while the
+              contact is still in front of you. */}
+          {detected.some((r) => r.ambiguous) && (
+            <div className="mt-2 text-[11px] shrink-0 leading-snug border-t border-warning/40 pt-1.5">
+              <span className="font-medium text-warning">{t('detp.ambiguous')}</span>{' '}
+              {detected.filter((r) => r.ambiguous).map((r) => (
+                <button
+                  key={`amb-${r.code}@${r.ref}`}
+                  type="button"
+                  title={r.name ?? ''}
+                  onClick={() => {
+                    const entry = `${r.code.toUpperCase()}@${r.ref.toUpperCase()}`;
+                    const cur = details.award_refs ?? '';
+                    // Only one of the candidates can be right — replace any
+                    // sibling already picked for this award rather than stacking.
+                    const kept = cur.split(';').filter((e) => e && e.split('@')[0].toUpperCase() !== r.code.toUpperCase());
+                    onChange({ award_refs: [...kept, entry].join(';') });
+                    setDetected((d) => d.filter((x) => !x.ambiguous || x.code.toUpperCase() !== r.code.toUpperCase()));
+                  }}
+                  className="inline-block mr-1.5 px-1.5 py-0.5 rounded font-mono whitespace-nowrap border border-warning/50 text-warning hover:bg-warning/10"
+                >
+                  {r.code}@{r.ref}{r.name ? ` — ${r.name}` : ''}
+                </button>
+              ))}
+            </div>
+          )}
+          {detected.some((r) => !r.ambiguous) && (
             <div className="mt-2 text-[11px] text-muted-foreground shrink-0 max-h-14 overflow-y-auto leading-snug border-t border-border/50 pt-1.5">
               <span className="font-medium text-foreground/70">{t('detp.detected')}</span>{' '}
-              {detected.map((r) => (
+              {detected.filter((r) => !r.ambiguous).map((r) => (
                 <span key={`${r.code}@${r.ref}`} className="inline-block mr-1.5 font-mono whitespace-nowrap" title={r.name ?? ''}>
                   <span className="text-foreground/80">{r.code}{r.ref ? `@${r.ref}` : ''}</span>
                 </span>

frontend/src/components/FlexPanel.tsx

@@ -323,13 +323,15 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
     }
     // eslint-disable-next-line react-hooks/exhaustive-deps
   }, [st.cw_speed]);
-  // Peak-hold: keep the highest reading for ~2 s so the jittery VITA-49 meters
+  // Peak-hold: keep the highest reading for a second so the jittery VITA-49
-  // read steadily instead of jumping every poll.
+  // meters read steadily instead of jumping every poll. One second, not two —
+  // longer and the meters visibly trail the end of a transmission, which reads
+  // as the app lagging rather than as a peak being held.
   const peak = useRef<Record<string, { v: number; t: number }>>({});
-  const peakHold = (key: string, val: number) => {
+  const peakHold = (key: string, val: number, windowMs = 1000) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > windowMs) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
@@ -355,7 +357,7 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
   }, []);
 
   // PowerGenius XL direct connection (fan mode), independent of the Flex link.
-  const [pg, setPg] = useState<{ connected: boolean; fan_mode?: string; host?: string; last_error?: string }>({ connected: false });
+  const [pg, setPg] = useState<{ connected: boolean; fan_mode?: string; host?: string; last_error?: string; state?: string; peak_w?: number }>({ connected: false });
   useEffect(() => {
     let alive = true;
     const tick = async () => { try { const s: any = await GetPGXLStatus(); if (alive) setPg(s || { connected: false }); } catch {} };
@@ -978,10 +980,12 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   spe.operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
                 {spe.operate ? 'OPERATE' : 'STANDBY'}
               </button>
-              {/* Power ON / OFF (best-guess keystrokes from the APG — verify on hw). */}
+              {/* Power ON pulses RTS then DTR — it must stay clickable while the amp
+                  is off (no status = not "connected"), and serial only. */}
               <div className="inline-flex rounded-lg overflow-hidden border-2 border-success/70">
-                <button type="button" disabled={!spe.connected}
+                <button type="button" disabled={!(spe.connected || spe.transport === 'serial')}
                   onClick={() => AmpPower(selAmp.id, true).catch(() => {})}
+                  title={spe.transport === 'serial' ? 'Power on (RTS then DTR pulse)' : 'Power-on needs the serial RTS/DTR lines — not available over a network bridge'}
                   className="px-3 py-2 text-sm font-bold bg-card text-success hover:bg-success/15 disabled:opacity-30">ON</button>
                 <button type="button" disabled={!spe.connected}
                   onClick={() => AmpPower(selAmp.id, false).catch(() => {})}
@@ -1083,9 +1087,6 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   st.amp_operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
                 {st.amp_operate ? 'OPERATE' : 'STANDBY'}
               </button>
-              <span className="text-xs text-muted-foreground">
-                {st.amp_operate ? t('flxp.ampInLine') : t('flxp.ampBypassed')}
-              </span>
               {/* Fan mode — shown when the PowerGenius is configured (Settings →
                   PowerGenius). The dot shows the direct-connection state; the
                   selector is disabled until connected (hover it for the error). */}
@@ -1118,6 +1119,12 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
               const amp = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
                 && !/^(RL|DRV)$/i.test((m.name || '').trim()));
               if (off || amp.length === 0) return null;
+              // Power comes from the radio's meter stream and nothing else. The
+              // amplifier also reports a "peakfwd", and using it was a mistake
+              // twice over: it is a latched maximum that is never reset, and it
+              // survives in the last-known status after the amp disconnects — so
+              // it claimed 1350 W from an old transmission while the radio was
+              // putting out 10.
               return (
                 <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
                   {amp.map((m) => {

frontend/src/components/SettingsModal.tsx

@@ -1136,7 +1136,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
   const [modeDraft, setModeDraft] = useState('');
   const [catCfg, setCatCfg] = useState<CATSettings>({
     enabled: false, backend: 'omnirig', omnirig_rig: 1, omnirig_vfo: '', flex_host: '', flex_port: 4992, flex_spots: false, flex_decode_spots: false, flex_decode_secs: 120,
-    yaesu_port: '', yaesu_baud: 38400, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70,
+    yaesu_port: '', yaesu_baud: 38400, yaesu_low_lines: false, kenwood_low_lines: false, kenwood_port: '', kenwood_baud: 9600, kenwood_host: '', xiegu_port: '', xiegu_baud: 19200, xiegu_addr: 0x70, xiegu_ptt_line: '',
     icom_port: '', icom_baud: 115200, icom_addr: 0x98, icom_net_host: '', icom_net_user: '', icom_net_pass: '', icom_net_audio: false,
     tci_host: '', tci_port: 40001, tci_spots: false, poll_ms: 250, delay_ms: 0,
     digital_default: 'FT8', share_enabled: false, share_port: 4532,
@@ -2538,6 +2538,19 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                   }} />
                 <span className="text-xs text-muted-foreground">{t('cat.xieguAddrHint')}</span>
               </div>
+              <div className="space-y-1">
+                <Label>{t('cat.xieguPTTLine')}</Label>
+                <Select value={catCfg.xiegu_ptt_line || 'civ'}
+                  onValueChange={(v) => setCatCfg((s) => ({ ...s, xiegu_ptt_line: v === 'civ' ? '' : v }))}>
+                  <SelectTrigger><SelectValue /></SelectTrigger>
+                  <SelectContent>
+                    <SelectItem value="civ">{t('cat.xieguPTTCiv')}</SelectItem>
+                    <SelectItem value="rts">RTS</SelectItem>
+                    <SelectItem value="dtr">DTR</SelectItem>
+                  </SelectContent>
+                </Select>
+                <span className="text-xs text-muted-foreground">{t('cat.xieguPTTHint')}</span>
+              </div>
             </>
             )}
             {catCfg.backend === 'yaesu' && (
@@ -2567,6 +2580,13 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                 </Select>
                 <span className="text-xs text-muted-foreground">{t('cat.yaesuBaudHint')}</span>
               </div>
+              <div className="space-y-1">
+                <label className="flex items-center gap-2 text-xs cursor-pointer">
+                  <Checkbox checked={!!catCfg.yaesu_low_lines} onCheckedChange={(c) => setCatCfg((s) => ({ ...s, yaesu_low_lines: !!c }))} />
+                  {t('cat.lowerLines')}
+                </label>
+                <span className="text-xs text-muted-foreground">{t('cat.lowerLinesHint')}</span>
+              </div>
             </>
             )}
             {['icom', 'xiegu', 'kenwood'].includes(catCfg.backend) && (
@@ -2614,6 +2634,13 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
                 />
                 <span className="text-xs text-muted-foreground">{t('cat.kenwoodHostHint')}</span>
               </div>
+              <div className="space-y-1">
+                <label className="flex items-center gap-2 text-xs cursor-pointer">
+                  <Checkbox checked={!!catCfg.kenwood_low_lines} onCheckedChange={(c) => setCatCfg((s) => ({ ...s, kenwood_low_lines: !!c }))} />
+                  {t('cat.lowerLines')}
+                </label>
+                <span className="text-xs text-muted-foreground">{t('cat.lowerLinesHint')}</span>
+              </div>
             </>
             )}
             {catCfg.backend === 'icom' && (
@@ -3271,6 +3298,7 @@ export function SettingsModal({ onClose, onSaved, initialSection, onMainPaneChan
           <Button variant="outline" size="sm" onClick={addAmp}>
             <Plus className="size-3.5 mr-1" /> {t('amp.add')}
           </Button>
+
         </div>
       </>
     );

frontend/src/components/StationControlPanel.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useRef, useState } from 'react';
+import { useCallback, useEffect, useLayoutEffect, useRef, useState } from 'react';
 import { Plus, Pencil, Trash2, Power, PlugZap, Loader2, Check, X, Compass, Square, Antenna as AntennaIcon, ArrowDownToLine, Minus, RefreshCw, GripVertical } from 'lucide-react';
 import { Button } from '@/components/ui/button';
 import { Input } from '@/components/ui/input';
@@ -26,13 +26,22 @@ type Device = { id: string; type: string; name: string; host: string; user?: str
 type Relay = { number: number; label: string; on: boolean };
 type DevStatus = { id: string; name: string; type: string; connected: boolean; error?: string; relays: Relay[] };
 
-const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8 };
+// Dashboard geometry: a grid of EQUAL columns whose cards also share a common
-const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)' };
+// HEIGHT per row — every card stretches to the tallest one beside it. Masonry
+// packed tighter but left the row edges ragged, which read as untidy on a wide
+// screen; aligned rows are what an operator expects from a dashboard.
+const CARD_MIN = 430; // narrowest a card may get before "Auto" drops a column
+const GRID_GAP = 16; // px between cards, both axes
+
+const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8, dingtian: 2 };
+const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)', dingtian: 'Dingtian IOT relay' };
 
 // Relay count for a configured device: fixed by type, except Denkovi (4/8) and
 // the generic USB-serial board, whose channel count the user picks.
 const chanCount = (d: Device): number =>
-  (d.type === 'denkovi' || d.type === 'usbrelay') ? (d.channels && d.channels >= 1 ? d.channels : 8) : (RELAY_COUNT[d.type] ?? 5);
+  (d.type === 'denkovi' || d.type === 'usbrelay') ? (d.channels && d.channels >= 1 ? d.channels : 8)
+    : d.type === 'dingtian' ? (d.channels && d.channels >= 1 ? d.channels : 2)
+      : (RELAY_COUNT[d.type] ?? 5);
 
 function blankDevice(): Device {
   return { id: '', type: 'webswitch', name: '', host: '', user: '', pass: '', labels: Array(5).fill('') };
@@ -269,6 +278,23 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   // Max columns per row (persisted). "Auto" fills the window; a number caps the
   // row so cards wrap onto further lines even when there's horizontal room.
   const [cols, setCols] = useState<string>(() => localStorage.getItem('opslog.stationCols') || 'auto');
+
+  // How many columns the dashboard shows. "Auto" fits as many CARD_MIN-wide
+  // cards as the window allows; an explicit count is honoured as asked, even
+  // past that width — the operator can see his own screen.
+  const gridRef = useRef<HTMLDivElement | null>(null);
+  const [colCount, setColCount] = useState(1);
+
+  useLayoutEffect(() => {
+    if (cols !== 'auto') { setColCount(Number(cols) || 1); return; }
+    const el = gridRef.current;
+    if (!el) return;
+    const measure = () => setColCount(Math.max(1, Math.floor((el.clientWidth + GRID_GAP) / (CARD_MIN + GRID_GAP))));
+    measure();
+    const ro = new ResizeObserver(measure);
+    ro.observe(el);
+    return () => ro.disconnect();
+  }, [cols]);
   // Amplifiers (Settings → Amplifier): shown here so operators without a
   // FlexRadio panel still get the controls. EVERY configured amp gets its own
   // card (identical to the Flex panel's) — no dropdown. Polled fast (1.5s) so the
@@ -415,10 +441,10 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
     );
   };
 
-  // `wide` cards span the whole dashboard instead of sitting in one masonry
+  // `wide` cards take two grid columns instead of one. The amplifier and tuner
-  // column. The amplifier and tuner carry meter rows and a channel selector that
+  // carry meter rows and a channel selector that are unreadable squeezed into a
-  // are unreadable squeezed into a ~430px column — they are the same cards the
+  // single ~430px column — they are the same cards the FlexRadio panel shows
-  // FlexRadio panel shows full-width, and they need that room here too.
+  // full-width, and they need that room here too.
   const widgets: { id: string; node: React.ReactNode; wide?: boolean }[] = [];
   if (rot.enabled) {
     widgets.push({ id: 'rotator', node: <RotatorWidget hd={rot} refetch={pollRot} centerLat={centerLat} centerLon={centerLon} bearing={bearing} t={t} /> });
@@ -446,7 +472,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
           {/* Max columns per row: Auto fills the window; 1/2/3/4 cap the row so a
               card can sit on a further line even with horizontal room to spare. */}
           <div className="flex items-center rounded-md border border-border overflow-hidden text-[11px]">
-            {(['auto', '1', '2', '3', '4'] as const).map((c) => (
+            {(['auto', '1', '2', '3', '4', '5', '6'] as const).map((c) => (
               <button key={c} type="button"
                 onClick={() => { setCols(c); writeUiPref('opslog.stationCols', c); }}
                 className={cn('px-2 py-1 font-medium', cols === c ? 'bg-primary text-primary-foreground' : 'text-muted-foreground hover:bg-muted')}>
@@ -466,31 +492,36 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
         </div>
       )}
 
-      {/* Masonry dashboard: fixed-width cards flow into balanced CSS columns so
+      {/* Dashboard grid: equal columns, and every card stretches to the height of
-          they pack tightly by height (no ragged gaps under short cards). "Auto"
+          the tallest one on its row, so the rows line up instead of ending
-          fits as many ~430px columns as the window allows; a fixed count caps the
+          ragged. One column each, two for the amplifier/tuner whose meter rows
-          container width to that many columns. Each card has a grip handle (left
+          need the room. Each card has a grip handle (left rail) as the drag
-          rail) as the drag initiator (the body is full of buttons). */}
+          initiator, since the body is full of buttons. */}
-      <div style={{ columnWidth: '430px', columnGap: '1rem', columnFill: 'balance',
+      <div ref={gridRef} style={{
-        ...(cols !== 'auto' ? { maxWidth: `${Number(cols) * 446}px` } : {}) }}>
+        display: 'grid',
+        gridTemplateColumns: `repeat(${colCount}, minmax(0, 1fr))`,
+        gap: `${GRID_GAP}px`,
+      }}>
         {ordered.map((w) => (
-          // column-span:all lifts a wide card out of the columns and across the
+          <div key={w.id}
-          // full container, while keeping it in document order — so drag-reorder
+            // A wide card takes two columns — but never more than there are, or
-          // still works between wide and normal cards. Capped so it stays a card
+            // the grid would grow a phantom column on a narrow window.
-          // and not a banner on an ultra-wide window.
+            style={{ gridColumn: w.wide ? `span ${Math.min(2, colCount)}` : undefined }}
-          <div key={w.id} className="flex items-stretch break-inside-avoid mb-4"
-            style={w.wide ? { columnSpan: 'all', maxWidth: '900px' } : undefined}
             onDragOver={(e) => { if (dragId.current) { e.preventDefault(); e.dataTransfer.dropEffect = 'move'; } }}
             onDrop={(e) => { if (dragId.current) { e.preventDefault(); onDrop(w.id); } }}>
-            <div draggable
+            {/* h-full down the chain is what makes the card fill the row height
-              onDragStart={(e) => { dragId.current = w.id; e.dataTransfer.effectAllowed = 'move'; }}
+                rather than sit at its natural size in a taller cell. */}
-              onDragEnd={() => { dragId.current = null; }}
+            <div className="flex items-stretch h-full">
-              title={t('station.dragMove')}
+              <div draggable
-              className={cn('flex items-center shrink-0 px-0.5 rounded-l-xl cursor-grab active:cursor-grabbing text-muted-foreground/30 hover:text-muted-foreground hover:bg-muted/40 transition-colors',
+                onDragStart={(e) => { dragId.current = w.id; e.dataTransfer.effectAllowed = 'move'; }}
-                dragId.current === w.id && 'opacity-60')}>
+                onDragEnd={() => { dragId.current = null; }}
-              <GripVertical className="size-4" />
+                title={t('station.dragMove')}
+                className={cn('flex items-center shrink-0 px-0.5 rounded-l-xl cursor-grab active:cursor-grabbing text-muted-foreground/30 hover:text-muted-foreground hover:bg-muted/40 transition-colors',
+                  dragId.current === w.id && 'opacity-60')}>
+                <GripVertical className="size-4" />
+              </div>
+              <div className="flex-1 min-w-0 [&>*]:h-full">{w.node}</div>
             </div>
-            <div className="flex-1 min-w-0">{w.node}</div>
           </div>
         ))}
       </div>
@@ -523,6 +554,7 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
     onChange({ ...device, channels, labels });
   };
   const isKM = device.type === 'kmtronic';
+  const isDingtian = device.type === 'dingtian';
   const isDenkovi = device.type === 'denkovi';
   const isUsbRelay = device.type === 'usbrelay';
   // COM ports for the generic USB-serial relay picker.
@@ -573,6 +605,7 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
             <SelectContent>
               <SelectItem value="webswitch">WebSwitch 1216H (5 relays)</SelectItem>
               <SelectItem value="kmtronic">KMTronic 8-relay (LAN)</SelectItem>
+              <SelectItem value="dingtian">Dingtian IOT relay (LAN / WiFi)</SelectItem>
               <SelectItem value="denkovi">Denkovi USB (FT245 / D2XX)</SelectItem>
               <SelectItem value="usbrelay">Denkovi USB (serial / COM)</SelectItem>
             </SelectContent>
@@ -583,13 +616,13 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           <Input value={device.name} placeholder={TYPE_LABEL[device.type]} onChange={(e) => onChange({ ...device, name: e.target.value })} />
         </div>
       </div>
-      {(isDenkovi || isUsbRelay) && (
+      {(isDenkovi || isUsbRelay || isDingtian) && (
         <div className="space-y-1 max-w-[10rem]">
           <Label>{t('station.channels')}</Label>
           <Select value={String(chanCount(device))} onValueChange={(v) => setChannels(parseInt(v, 10))}>
             <SelectTrigger className="h-9"><SelectValue /></SelectTrigger>
             <SelectContent>
-              {(isDenkovi ? [4, 8] : [1, 2, 4, 8, 16]).map((n) => (
+              {(isDenkovi ? [4, 8] : isDingtian ? [2, 4, 8, 16, 24, 32] : [1, 2, 4, 8, 16]).map((n) => (
                 <SelectItem key={n} value={String(n)}>{n}</SelectItem>
               ))}
             </SelectContent>
@@ -632,11 +665,28 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           <p className="text-[10px] text-muted-foreground">{t('station.usbRelayHint')}</p>
         </div>
       ) : (
-      <div className={cn('grid gap-3', isKM ? 'grid-cols-3' : 'grid-cols-1')}>
+      <div className={cn('grid gap-3', (isKM || isDingtian) ? 'grid-cols-3' : 'grid-cols-1')}>
-        <div className={cn('space-y-1', isKM ? '' : 'max-w-xs')}>
+        <div className={cn('space-y-1', (isKM || isDingtian) ? '' : 'max-w-xs')}>
           <Label>{t('station.host')}</Label>
           <Input className="font-mono" value={device.host} placeholder="192.168.1.100" onChange={(e) => onChange({ ...device, host: e.target.value })} />
         </div>
+        {/* Dingtian: both are OFF on a factory board — the session ID only when
+            "HTTP Session" is enabled in its web page, the password only when a
+            relay password is set. */}
+        {isDingtian && (
+          <>
+            <div className="space-y-1">
+              <Label>{t('station.dtSession')}</Label>
+              <Input className="font-mono" value={device.user ?? ''} placeholder={t('station.optional')}
+                onChange={(e) => onChange({ ...device, user: e.target.value })} />
+            </div>
+            <div className="space-y-1">
+              <Label>{t('station.dtPwd')}</Label>
+              <Input className="font-mono" value={device.pass ?? ''} placeholder="0"
+                onChange={(e) => onChange({ ...device, pass: e.target.value.replace(/[^0-9]/g, '') })} />
+            </div>
+          </>
+        )}
         {isKM && (
           <>
             <div className="space-y-1">

frontend/src/components/TunerCard.tsx

@@ -76,13 +76,16 @@ export function TunerCard({ status, t }: { status: TGStatus; t: (k: string, v?:
   const peakHold = (key: string, val: number) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > 1000) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
   const connected = !!status.connected;
   const rawVswr = status.vswr && status.vswr > 0 ? status.vswr : undefined;
-  const rawFwdW = status.fwd_w && status.fwd_w >= 1 ? status.fwd_w : 0;
+  // Prefer the device's own peak detector over the sampled reading; the JS hold
+  // below still smooths what is left between polls.
+  const rawPeak = Math.max(status.peak_w ?? 0, status.fwd_w ?? 0);
+  const rawFwdW = rawPeak >= 1 ? rawPeak : 0;
   const fwdW = peakHold('fwd', rawFwdW);
 
   // SWR needs RF to mean anything: sampled on receive the device reports a
@@ -93,13 +96,14 @@ export function TunerCard({ status, t }: { status: TGStatus; t: (k: string, v?:
   // That expiry is the point: the first version of this held the last TX value
   // with no timeout at all, so the meter sat frozen on the previous transmission
   // indefinitely — reading 1.39:1 with the radio plainly in RX and 0 W forward.
-  // Same 2 s window as the power peak above, so the two meters clear together.
+  // Same one-second window as the power peak above, so the two meters clear
+  // together.
   const swrHold = useRef<{ v: number; t: number } | null>(null);
   if (rawFwdW >= 1 && rawVswr) swrHold.current = { v: rawVswr, t: Date.now() };
   const heldSwr = swrHold.current;
   const vswr = rawFwdW >= 1
     ? rawVswr
-    : heldSwr && Date.now() - heldSwr.t < 2000
+    : heldSwr && Date.now() - heldSwr.t < 1000
       ? heldSwr.v
       : undefined;
   const active = status.active ?? 1;

frontend/src/components/TunerGeniusPanel.tsx

@@ -8,7 +8,7 @@ export type TGChannel = {
 };
 export type TGStatus = {
   connected: boolean; host?: string; last_error?: string;
-  fwd_dbm?: number; fwd_w?: number; swr_db?: number; vswr?: number; freq_mhz?: number;
+  fwd_dbm?: number; fwd_w?: number; peak_w?: number; swr_db?: number; vswr?: number; freq_mhz?: number;
   operate?: boolean; bypass?: boolean; tuning?: boolean; active?: number;
   antenna?: number; three_way?: boolean; message?: string;
   a?: TGChannel; b?: TGChannel;
@@ -69,6 +69,10 @@ export function TunerGeniusPanel({ status, onTune, onBypass, onOperate, onActiva
   const { t } = useI18n();
   const vswr = status.vswr && status.vswr > 0 ? status.vswr : undefined;
   const active = status.active ?? 1;
+  // The device's own peak, not the instantaneous reading: a 400 ms poll lands
+  // between syllables as often as on a peak, so the plain figure showed a few
+  // hundred watts on a kilowatt transmission.
+  const fwdW = Math.max(status.peak_w ?? 0, status.fwd_w ?? 0);
 
   return (
     <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
@@ -103,7 +107,7 @@ export function TunerGeniusPanel({ status, onTune, onBypass, onOperate, onActiva
             <div className="rounded-lg border border-border bg-card/70 px-2 py-1.5 text-center">
               <div className="text-[9px] uppercase tracking-wider text-muted-foreground">{t('tgp.power')}</div>
               <div className="text-lg font-bold font-mono leading-tight text-foreground/80">
-                {status.fwd_w && status.fwd_w >= 1 ? `${Math.round(status.fwd_w)} W` : '—'}
+                {fwdW >= 1 ? `${Math.round(fwdW)} W` : '—'}
               </div>
             </div>
           </div>

frontend/src/components/ui/tabs.tsx

@@ -37,7 +37,11 @@ const TabsContent = React.forwardRef<
 >(({ className, ...props }, ref) => (
   <TabsPrimitive.Content
     ref={ref}
-    className={cn('mt-2 ring-offset-background focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring focus-visible:ring-offset-2', className)}
+    // No focus ring on the panel itself. Radix makes the content focusable and
+    // moves focus into it when a tab is selected, so clicking anywhere in the
+    // lower half drew a full-width orange rule under the tab strip. The panel is
+    // a container — what it holds carries its own focus styling.
+    className={cn('mt-2 focus-visible:outline-none', className)}
     {...props}
   />
 ));

frontend/src/lib/uiPref.ts

@@ -17,6 +17,8 @@ const PORTABLE_KEYS = [
   'opslog.autofocusWB',   // auto-focus Worked-before
   'hamlog.filterPresets', // Filter Builder saved presets
   'opslog.showRotor',     // rotor compass shown next to the keyers
+  'opslog.showAmpWidget', // amplifier widget shown next to the keyers
+  'opslog.ampSel.widget', // which amplifier that widget shows ("all" or an amp id)
   'opslog.showBeamOnMap', // antenna beam lobe drawn on the Main map
   'opslog.startEqualsEnd',// log TIME_ON = TIME_OFF (QSO time = completion time)
   'opslog.showQsoRate',   // QSO-rate meter (10/60 min) shown in the header
@@ -36,6 +38,7 @@ const PORTABLE_KEYS = [
   'opslog.clusterLockBand', 'opslog.clusterLockMode', 'opslog.clusterStatusFilter',
   'opslog.clusterModeFilter', 'opslog.clusterSearch', 'opslog.clusterHideWorked',
   'opslog.activeTab',     // last selected tab
+  'opslog.mainSplit',    // Main tab: width share of the left pane (percent)
   // NOTE: 'hamlog.awardColsShown' and the grid column layouts are NOT listed here.
   // They are handled by lib/gridPrefs, which scopes the localStorage cache PER
   // PROFILE and mirrors to the DB (already per-profile) itself — mirroring them

frontend/src/style.css

@@ -679,10 +679,10 @@
    disappears on the dark themes. Invert it there — the control itself is worth
    keeping (OS calendar, locale date order, keyboard entry), only its icon needs
    help. */
-[data-theme='dim-slate'] input[type='date']::-webkit-calendar-picker-indicator,
+   Every temporal input carries the same glyph, so the rule names them all:
-[data-theme='dark-warm'] input[type='date']::-webkit-calendar-picker-indicator,
+   datetime-local was left out at first and its icon stayed invisible. */
-[data-theme='dark-graphite'] input[type='date']::-webkit-calendar-picker-indicator,
+:is([data-theme='dim-slate'], [data-theme='dark-warm'], [data-theme='dark-graphite'], [data-theme='high-contrast'])
-[data-theme='high-contrast'] input[type='date']::-webkit-calendar-picker-indicator {
+  :is(input[type='date'], input[type='datetime-local'], input[type='time'], input[type='month'], input[type='week'])::-webkit-calendar-picker-indicator {
-  filter: invert(1) brightness(1.6);
+  filter: invert(1) brightness(1.8);
-  opacity: 0.75;
+  opacity: 0.9;
 }

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.22.6';
+export const APP_VERSION = '0.23.1';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -75,7 +75,7 @@ export function AudioStopTX():Promise<void>;
 
 export function AudioTXActive():Promise<boolean>;
 
-export function AwardCellQSOs(arg1:string,arg2:string,arg3:string):Promise<Array<qso.QSO>>;
+export function AwardCellQSOs(arg1:string,arg2:string,arg3:string,arg4:string):Promise<Array<qso.QSO>>;
 
 export function AwardFields():Promise<Array<string>>;
 
@@ -365,7 +365,7 @@ export function GetAudioSettings():Promise<main.AudioSettings>;
 
 export function GetAutostartPrograms():Promise<Array<main.AutostartProgram>>;
 
-export function GetAward(arg1:string):Promise<award.Result>;
+export function GetAward(arg1:string,arg2:string):Promise<award.Result>;
 
 export function GetAwardDefs():Promise<Array<award.Def>>;
 
@@ -605,6 +605,8 @@ export function ImportAwards():Promise<main.AwardImportResult>;
 
 export function InspectAwardImport():Promise<main.AwardImportPreview>;
 
+export function IsNewUSCounty(arg1:string,arg2:string):Promise<boolean>;
+
 export function LaunchAutostartProgram(arg1:string):Promise<main.AutostartLaunchResult>;
 
 export function LaunchAutostartPrograms():Promise<Array<main.AutostartLaunchResult>>;

frontend/wailsjs/go/main/App.js

@@ -98,8 +98,8 @@ export function AudioTXActive() {
   return window['go']['main']['App']['AudioTXActive']();
 }
 
-export function AwardCellQSOs(arg1, arg2, arg3) {
+export function AwardCellQSOs(arg1, arg2, arg3, arg4) {
-  return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3);
+  return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3, arg4);
 }
 
 export function AwardFields() {
@@ -678,8 +678,8 @@ export function GetAutostartPrograms() {
   return window['go']['main']['App']['GetAutostartPrograms']();
 }
 
-export function GetAward(arg1) {
+export function GetAward(arg1, arg2) {
-  return window['go']['main']['App']['GetAward'](arg1);
+  return window['go']['main']['App']['GetAward'](arg1, arg2);
 }
 
 export function GetAwardDefs() {
@@ -1158,6 +1158,10 @@ export function InspectAwardImport() {
   return window['go']['main']['App']['InspectAwardImport']();
 }
 
+export function IsNewUSCounty(arg1, arg2) {
+  return window['go']['main']['App']['IsNewUSCounty'](arg1, arg2);
+}
+
 export function LaunchAutostartProgram(arg1) {
   return window['go']['main']['App']['LaunchAutostartProgram'](arg1);
 }

frontend/wailsjs/go/models.ts

@@ -316,6 +316,7 @@ export namespace award {
 	    leading_str?: string;
 	    trailing_str?: string;
 	    dynamic?: boolean;
+	    one_ref_per_qso?: boolean;
 	    or_rules?: OrRule[];
 	    dxcc_filter: number[];
 	    valid_bands?: string[];
@@ -356,6 +357,7 @@ export namespace award {
 	        this.leading_str = source["leading_str"];
 	        this.trailing_str = source["trailing_str"];
 	        this.dynamic = source["dynamic"];
+	        this.one_ref_per_qso = source["one_ref_per_qso"];
 	        this.or_rules = this.convertValues(source["or_rules"], OrRule);
 	        this.dxcc_filter = source["dxcc_filter"];
 	        this.valid_bands = source["valid_bands"];
@@ -461,6 +463,8 @@ export namespace award {
 	    ref_count: number;
 	    steps: Step[];
 	    manual?: string[];
+	    superseded?: string[];
+	    ambiguous?: string[];
 	    result: string[];
 	
 	    static createFrom(source: any = {}) {
@@ -476,6 +480,8 @@ export namespace award {
 	        this.ref_count = source["ref_count"];
 	        this.steps = this.convertValues(source["steps"], Step);
 	        this.manual = source["manual"];
+	        this.superseded = source["superseded"];
+	        this.ambiguous = source["ambiguous"];
 	        this.result = source["result"];
 	    }
 	
@@ -1912,11 +1918,14 @@ export namespace main {
 	    xiegu_port: string;
 	    xiegu_baud: number;
 	    xiegu_addr: number;
+	    xiegu_ptt_line: string;
 	    yaesu_port: string;
 	    yaesu_baud: number;
 	    kenwood_host: string;
 	    kenwood_port: string;
 	    kenwood_baud: number;
+	    yaesu_low_lines: boolean;
+	    kenwood_low_lines: boolean;
 	    icom_port: string;
 	    icom_baud: number;
 	    icom_addr: number;
@@ -1951,11 +1960,14 @@ export namespace main {
 	        this.xiegu_port = source["xiegu_port"];
 	        this.xiegu_baud = source["xiegu_baud"];
 	        this.xiegu_addr = source["xiegu_addr"];
+	        this.xiegu_ptt_line = source["xiegu_ptt_line"];
 	        this.yaesu_port = source["yaesu_port"];
 	        this.yaesu_baud = source["yaesu_baud"];
 	        this.kenwood_host = source["kenwood_host"];
 	        this.kenwood_port = source["kenwood_port"];
 	        this.kenwood_baud = source["kenwood_baud"];
+	        this.yaesu_low_lines = source["yaesu_low_lines"];
+	        this.kenwood_low_lines = source["kenwood_low_lines"];
 	        this.icom_port = source["icom_port"];
 	        this.icom_baud = source["icom_baud"];
 	        this.icom_addr = source["icom_addr"];
@@ -2700,6 +2712,7 @@ export namespace main {
 	    ref: string;
 	    name?: string;
 	    pickable: boolean;
+	    ambiguous?: boolean;
 	
 	    static createFrom(source: any = {}) {
 	        return new QSOAwardRef(source);
@@ -2711,6 +2724,7 @@ export namespace main {
 	        this.ref = source["ref"];
 	        this.name = source["name"];
 	        this.pickable = source["pickable"];
+	        this.ambiguous = source["ambiguous"];
 	    }
 	}
 	export class QSORate {
@@ -2890,6 +2904,8 @@ export namespace main {
 	    worked_call: boolean;
 	    new_county: boolean;
 	    new_pota: boolean;
+	    new_pfx: boolean;
+	    pfx?: string;
 	
 	    static createFrom(source: any = {}) {
 	        return new SpotStatus(source);
@@ -2906,6 +2922,8 @@ export namespace main {
 	        this.worked_call = source["worked_call"];
 	        this.new_county = source["new_county"];
 	        this.new_pota = source["new_pota"];
+	        this.new_pfx = source["new_pfx"];
+	        this.pfx = source["pfx"];
 	    }
 	}
 	export class StartupStatus {
@@ -3487,6 +3505,11 @@ export namespace powergenius {
 	    fan_mode?: string;
 	    temperature: number;
 	    operate: boolean;
+	    fwd_w: number;
+	    peak_w: number;
+	    vswr: number;
+	    id: number;
+	    peak_id: number;
 	
 	    static createFrom(source: any = {}) {
 	        return new Status(source);
@@ -3501,6 +3524,11 @@ export namespace powergenius {
 	        this.fan_mode = source["fan_mode"];
 	        this.temperature = source["temperature"];
 	        this.operate = source["operate"];
+	        this.fwd_w = source["fwd_w"];
+	        this.peak_w = source["peak_w"];
+	        this.vswr = source["vswr"];
+	        this.id = source["id"];
+	        this.peak_id = source["peak_id"];
 	    }
 	}
 
@@ -4546,6 +4574,7 @@ export namespace spe {
 	
 	export class Status {
 	    connected: boolean;
+	    transport: string;
 	    last_error?: string;
 	    model?: string;
 	    operate: boolean;
@@ -4569,6 +4598,7 @@ export namespace spe {
 	    constructor(source: any = {}) {
 	        if ('string' === typeof source) source = JSON.parse(source);
 	        this.connected = source["connected"];
+	        this.transport = source["transport"];
 	        this.last_error = source["last_error"];
 	        this.model = source["model"];
 	        this.operate = source["operate"];
@@ -4623,6 +4653,7 @@ export namespace tunergenius {
 	    last_error?: string;
 	    fwd_dbm: number;
 	    fwd_w: number;
+	    peak_w: number;
 	    swr_db: number;
 	    vswr: number;
 	    operate: boolean;
@@ -4650,6 +4681,7 @@ export namespace tunergenius {
 	        this.last_error = source["last_error"];
 	        this.fwd_dbm = source["fwd_dbm"];
 	        this.fwd_w = source["fwd_w"];
+	        this.peak_w = source["peak_w"];
 	        this.swr_db = source["swr_db"];
 	        this.vswr = source["vswr"];
 	        this.operate = source["operate"];

internal/acom/ATU-FINDINGS.md

@@ -0,0 +1,86 @@
+# ACOM built-in ATU — what we know, and why OpsLog does not drive it
+
+Session of 2026-08-02 on F4BPO's friend's **ACOM 500S**, serial link, telemetry
+trace. Written down so nobody repeats the work. **Conclusion first: the tuner
+cannot be started over the serial link, and the attempt to work around that was
+abandoned.**
+
+## The tuner is PA state 8
+
+Frame byte 3's high nibble is the PA status. ACOM's own list (recovered by the
+ACOM-Controller project) has no entry for 8; it is the antenna tuner. Confirmed
+twice, front-panel TUNE, with the byte-level trace running:
+
+```
+14:47:20.745  state 8 step 0   ← TUNE pressed. err=FF
+14:47:22.588  operator keys a carrier (FT-891, FM, 31 W, 3.6358 MHz)
+14:47:24.006  state 8 step 2
+14:47:25.201  state 8 step 4
+14:47:27.457  state 8 step 5
+14:47:30.092  state 5 STANDBY  ← accord finished
+```
+
+Byte 3's **low** nibble is a step counter through the accord: `0 → 2 → 4 → 5`.
+Step 0 means *armed, waiting for RF* — in the first of the two runs the
+amplifier sat there **30 seconds** untouched before the operator transmitted.
+
+`paStatusNames[8] = "TUNE"` in acom.go is the only thing kept from all of this.
+
+## The command does not exist in the state-command family
+
+Every action byte of `55 81 08 02 00 XX 00 CHK` was tried, each one from a
+**verified** STANDBY (an earlier sweep was worthless because its second code
+parked the amp in SERVICE, where it silently refuses everything — 17 false
+negatives). Result:
+
+| byte | effect |
+|------|--------|
+| 0x01, 0x02 | **reboot the amplifier** — it prints `AMPLIFIER: ACOM 500S / HELLO ME…` |
+| 0x04 | → SERVICE (state 4) |
+| 0x05 | → STANDBY (state 5) |
+| 0x06 | → OPERATE (state 6) |
+| 0x0A | → OFF (state 10) |
+| 0x03, 0x07..0x09, 0x0B..0x18 | nothing, state unchanged |
+
+The action byte **is** the target PA state — four independent confirmations.
+Which makes 0x08 the obvious candidate for TUNE. **It was tried, from a verified
+STANDBY, and does nothing.** State 8 is reachable from the front panel only.
+
+Going further would mean varying the other bytes of the frame. That is a large
+space, and 0x01/0x02 prove that bad values reboot a 500 W amplifier. Not worth
+it.
+
+## The workaround that was built and removed
+
+Since the amp waits, armed, for a carrier, OpsLog could watch for state 8 and
+supply one: memorise the mode, drop the power, switch to FM, key the PTT, wait
+for state 8 to clear, unkey, restore. It was implemented (`acomtune.go`, opt-in,
+Settings → Amplifier) and **removed** after the first hardware test:
+
+- the power change did not take effect, and
+- **the PTT was not released when the tune finished.**
+
+A logger that can leave a transceiver keyed is not acceptable, and the whole
+thing was scaffolding around a protocol we do not actually control. Removed at
+the operator's request: *"je veux qu'OpsLog soit solide et ça c'est de la
+bidouille."*
+
+If it is ever revisited, the unexplained part is why the tune-finished detection
+did not fire — `anyAcomTuning()` polled `StateRaw == 8` every 200 ms and should
+have seen the drop to STANDBY. Suspect the status snapshot, not the amplifier.
+
+## Loose ends worth knowing
+
+- **Frame byte 6 is a multiplexer.** The tail of the frame changes meaning with
+  it: `0x93` = bytes 48/49 carry the TX frequency in kHz (`62 1B` = 7010 while
+  the rig was on 7.010 MHz), `0x9D` = something else. Byte 70 looked like a
+  tuner flag for a while purely because of this — it toggles on its own several
+  times a minute. Do not read tail bytes without checking byte 6.
+- **Byte 5 bit 0x80 alternates frame to frame.** It is a sequence/parity bit,
+  not a command acknowledgement.
+- **Byte 66 (the error code) shows 0x14 / 0x8E / 0x69 / 0x0F during a normal
+  tune and during transmission.** `errText` renders those as "ERROR — see
+  display" and "Remove drive power", so an ACOM operator probably sees a false
+  alarm. This was never confirmed with the amplifier in OPERATE (it was in
+  STANDBY throughout, where drive genuinely is an error) — worth a look with a
+  clean log before touching the table.

internal/acom/acom.go

@@ -77,9 +77,14 @@ var models = map[string]model{
 }
 
 // paStatusNames maps the PAstatus nibble to a display string.
+// 8 is absent from the state list the ACOM-Controller project recovered; it is
+// the antenna tuner, read off F4BPO's 500S on 2026-08-02. Pressing TUNE on the
+// front panel took byte 3 from 0x51 to 0x80, the amp then WAITED 19 s doing
+// nothing until the operator keyed a carrier, ran the tune over ~8 s while the
+// low nibble stepped 0→2→4→5, and dropped back to 0x51 (STANDBY).
 var paStatusNames = map[int]string{
 	1: "RESET", 2: "INIT", 3: "DEBUG", 4: "SERVICE",
-	5: "STANDBY", 6: "RECEIVE", 7: "TRANSMIT", 9: "SYSTEM", 10: "OFF",
+	5: "STANDBY", 6: "RECEIVE", 7: "TRANSMIT", 8: "TUNE", 9: "SYSTEM", 10: "OFF",
 }
 
 // acomBands maps the band nibble to a band label.

internal/award/award.go

@@ -75,10 +75,22 @@ type Def struct {
 	LeadingStr  string    `json:"leading_str,omitempty"`  // strip this prefix before matching
 	TrailingStr string    `json:"trailing_str,omitempty"` // strip this suffix before matching
 	Dynamic     bool      `json:"dynamic,omitempty"`      // references not predefined (any value counts)
-	// NOTE: there is no "one reference per QSO" switch, and there was never any
+	// OneRefPerQSO refuses an AMBIGUOUS match rather than guessing.
-	// point in one. A QSO ALWAYS yields every reference its field holds — an n-fer
+	//
-	// POTA activation ("US-6544,US-0680"), a VUCC contact on a grid line. The old
+	// This is not the old `Multi` flag, which was removed for good reason: a QSO
-	// `Multi` flag was read by nothing; its checkbox changed nothing.
+	// always yields every reference its FIELD holds — an n-fer POTA activation
+	// ("US-6544,US-0680"), a VUCC contact on a grid line. That is several
+	// references, correctly.
+	//
+	// The case here is the opposite. The field holds ONE value and two entries in
+	// the reference list carry it: two German DOKs are both called "Gießen",
+	// because two clubs share the town. The matcher is not wrong, the data is
+	// ambiguous — and picking one would write a reference into the log that may
+	// well be the other. So on an award where a QSO can only ever count for one
+	// reference, an ambiguous match assigns NONE and the contact appears under
+	// "missing references", where the operator picks. Their choice then sticks:
+	// a manual reference overrides the matcher.
+	OneRefPerQSO bool `json:"one_ref_per_qso,omitempty"`
 
 	// OrRules are ordered FALLBACK searches for the primary one above: they are
 	// tried IN ORDER and only while nothing has matched yet — the first rule that
@@ -859,7 +871,15 @@ type Explanation struct {
 	RefCount   int      `json:"ref_count"`             // size of that list
 	Steps      []Step   `json:"steps"`
 	Manual     []string `json:"manual,omitempty"` // references the operator assigned by hand
-	Result     []string `json:"result"`           // what the QSO finally counts for
+	// Superseded is what the matcher had found before the operator's choice
+	// replaced it — shown in the trace so a correction is explainable rather
+	// than mysterious.
+	Superseded []string `json:"superseded,omitempty"`
+	// Ambiguous lists the references that matched when the award allows only one
+	// — none of them was kept. Shown so the operator sees WHICH ones to choose
+	// between rather than an unexplained blank.
+	Ambiguous []string `json:"ambiguous,omitempty"`
+	Result    []string `json:"result"` // what the QSO finally counts for
 }
 
 // Explain runs the matcher on a single QSO and reports what it did. It goes
@@ -977,8 +997,31 @@ func candidatesTrace(d *Def, re *regexp.Regexp, q *qso.QSO, rl refList, hasList
 	if ex != nil {
 		ex.Manual = manual
 	}
-	found = append(found, manual...)
+	// An operator's choice REPLACES what the matcher found. It does not join it.
+	//
+	// Adding to it was the behaviour, and it made a correction impossible: a
+	// German address matching two or three DOKs kept them all, so deleting the
+	// wrong ones and assigning the right one lasted exactly until the next
+	// recompute, which put them straight back. The operator was arguing with
+	// the matcher and could not win.
+	//
+	// One manual entry is stored per award (setOverrideRef drops the previous
+	// one), so this is an override in the storage as well as in the name.
+	if len(manual) > 0 {
+		if ex != nil {
+			ex.Superseded = dedupe(found)
+		}
+		found = manual
+	}
 	out := dedupe(found)
+	// Ambiguity is not a result. See OneRefPerQSO.
+	if d.OneRefPerQSO && len(manual) == 0 && len(out) > 1 {
+		if ex != nil {
+			ex.Ambiguous = out
+			ex.Result = []string{}
+		}
+		return nil
+	}
 	if ex != nil {
 		ex.Result = out
 	}

internal/award/catalog/dld.json

@@ -12,11 +12,14 @@
     "type": "QSOFIELDS",
     "field": "address",
     "match_by": "description",
+    "exact_match": true,
     "pattern": "",
+    "one_ref_per_qso": true,
     "or_rules": [
       {
         "field": "qth",
-        "match_by": "description"
+        "match_by": "description",
+        "exact_match": true
       }
     ],
     "dxcc_filter": [
@@ -34,7 +37,7 @@
     ],
     "total": 0,
     "builtin": true,
-    "version": 1
+    "version": 2
   },
   "references": [
     {

internal/award/override_test.go

@@ -0,0 +1,100 @@
+package award
+
+import (
+	"strings"
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// An operator's correction must survive a recompute.
+//
+// Reported on the DARC DOK award: a German address matches two or three DOKs,
+// the operator deletes the wrong ones and assigns the right one, and the next
+// recompute puts the wrong ones straight back. The manual reference was being
+// ADDED to what the matcher found instead of replacing it, so the correction
+// could never win.
+func TestManualReferenceReplacesTheMatch(t *testing.T) {
+	// An award that reads the address and matches a reference's description —
+	// the shape the DOK award uses, and the shape that over-matches.
+	def := Def{
+		Code: "DLD", Name: "DARC DOK", Field: "address",
+		MatchBy: "description", Type: "QSOFIELDS", Valid: true,
+	}
+	metas := []RefMeta{
+		{Code: "A01", Name: "Berlin", Valid: true},
+		{Code: "B05", Name: "Berlin Mitte", Valid: true},
+	}
+	// An address that legitimately matches both.
+	q := &qso.QSO{
+		Callsign: "DL2FDM",
+		Address:  "Berlin Mitte, 10115 Berlin",
+	}
+
+	auto := Explain(def, metas, q)
+	if len(auto.Result) < 2 {
+		t.Fatalf("the test needs an over-matching case; got %v", auto.Result)
+	}
+
+	// The operator picks the right one.
+	q.Extras = map[string]string{ManualRefsKey: "DLD@B05"}
+	fixed := Explain(def, metas, q)
+
+	if got := strings.Join(fixed.Result, ","); got != "B05" {
+		t.Errorf("after the correction the QSO counts for %q — want B05 alone", got)
+	}
+	if len(fixed.Superseded) == 0 {
+		t.Error("the trace does not say what the correction replaced")
+	}
+
+	// A QSO with no correction still gets everything the matcher found: the
+	// override must not disable matching for everyone else.
+	q2 := &qso.QSO{Callsign: "DL3XYZ", Address: "Berlin Mitte, 10115 Berlin"}
+	if len(Explain(def, metas, q2).Result) < 2 {
+		t.Error("an untouched QSO lost its automatic references")
+	}
+}
+
+// On an award where a QSO can only count for ONE reference, an ambiguous match
+// assigns none.
+//
+// Two DARC DOKs are called "Gießen" because two clubs share the town. Exact
+// matching finds both, and both are right as far as the matcher can tell.
+// Picking one would write a reference into the log that may well be the other —
+// so the contact is left for the operator, who now has the last word.
+func TestAmbiguousMatchIsRefusedWhenOnlyOneReferenceIsAllowed(t *testing.T) {
+	def := Def{
+		Code: "DLD", Name: "DARC DOK", Field: "qth",
+		MatchBy: "description", ExactMatch: true, Type: "QSOFIELDS", Valid: true,
+		OneRefPerQSO: true,
+	}
+	metas := []RefMeta{
+		{Code: "F07", Name: "Gießen", Valid: true},
+		{Code: "F61", Name: "Gießen", Valid: true},
+		{Code: "B11", Name: "Kassel", Valid: true},
+	}
+
+	amb := Explain(def, metas, &qso.QSO{Callsign: "DL2FDM", QTH: "Gießen"})
+	if len(amb.Result) != 0 {
+		t.Errorf("an ambiguous match produced %v — it should produce nothing", amb.Result)
+	}
+	if len(amb.Ambiguous) != 2 {
+		t.Errorf("the trace lists %v — it should name both candidates", amb.Ambiguous)
+	}
+
+	// An unambiguous one is untouched: this must not make the award stricter in
+	// general, only where the data genuinely does not decide.
+	ok := Explain(def, metas, &qso.QSO{Callsign: "DL3XYZ", QTH: "Kassel"})
+	if len(ok.Result) != 1 || ok.Result[0] != "B11" {
+		t.Errorf("an unambiguous QSO gave %v — want B11", ok.Result)
+	}
+
+	// And the operator's choice still wins over the ambiguity.
+	fixed := Explain(def, metas, &qso.QSO{
+		Callsign: "DL2FDM", QTH: "Gießen",
+		Extras: map[string]string{ManualRefsKey: "DLD@F61"},
+	})
+	if len(fixed.Result) != 1 || fixed.Result[0] != "F61" {
+		t.Errorf("after the operator picked F61 the QSO counts for %v", fixed.Result)
+	}
+}

internal/cat/flex.go

@@ -314,7 +314,12 @@ func (f *Flex) send(cmd string) int {
 		debugLog.Printf("Flex: send %q failed: %v", cmd, err)
 		return 0
 	}
-	debugLog.Printf("Flex: → %s", cmd)
+	// Meter subscriptions are pure bookkeeping and a Flex announces meters one
+	// status line at a time — tracing each "sub meter N" wrote dozens of lines
+	// at every connect.
+	if !strings.HasPrefix(cmd, "sub meter ") {
+		debugLog.Printf("Flex: → %s", cmd)
+	}
 	return seq
 }
 
@@ -773,17 +778,11 @@ func (f *Flex) handleStatus(payload string) {
 				f.meterMeta[num] = old
 			}
 			f.mu.Unlock()
-			// One line for the whole batch, not one per meter: a Flex announces
+			// Not logged: the radio announces meters ONE per status line, so even
-			// dozens at connect and that was a wall of text every time.
+			// a batched line meant dozens of them at every connect.
-			var names []string
 			for _, id := range newIDs {
-				mi := f.meterMeta[id]
-				names = append(names, nonEmpty(mi.name, strconv.Itoa(id)))
 				f.subscribeMeter(id)
 			}
-			if len(names) > 0 {
-				debugLog.Printf("Flex: subscribed to %d meter(s): %s", len(names), strings.Join(names, " "))
-			}
 		}
 		// Spot status: "spot <index> …". Track the index so we can clear the
 		// panadapter, and log it verbatim — a click on a panadapter spot pushes a
@@ -2261,13 +2260,6 @@ func (f *Flex) subscribeMeter(id int) {
 	f.send(fmt.Sprintf("sub meter %d", id))
 }
 
-func nonEmpty(s, def string) string {
-	if s == "" {
-		return def
-	}
-	return s
-}
-
 func parseFloatDefault(s string, def float64) float64 {
 	if v, err := strconv.ParseFloat(strings.TrimSpace(s), 64); err == nil {
 		return v

internal/cat/icomserial.go

@@ -114,6 +114,15 @@ type IcomSerial struct {
 	silentGrace time.Duration // current width of that tolerance (backs off, see ReadState)
 	dspLoaded   bool          // readDSP has run since the rig became responsive (loads all
 	//                     the panel's set-once controls once the rig actually answers)
+	// When the console last asked for the DSP snapshot. The meters and the
+	// front-panel rotation are polled ONLY while something is displaying them:
+	// they are half of OpsLog's CI-V traffic, and on a shared bus — a microHAM
+	// Router splitting one CI-V link into two virtual ports, OpsLog on one and
+	// WSJT-X/MSHV on the other — every frame we don't need is a frame that can
+	// collide with the other program's.
+	dspWantMu sync.Mutex
+	dspWantAt time.Time
+
 	lastSetFreq   int64 // last frequency commanded (spot click: freq then mode)
 	lastSetFreqAt time.Time
 
@@ -409,15 +418,25 @@ func (b *IcomSerial) ReadState() (RigState, error) {
 	}
 
 	// Live meters + TX state for the Icom panel (the rig doesn't push these).
+	// The meters are polled only while the console is actually on screen: they
+	// were three CI-V round trips per cycle, every cycle, whether or not anyone
+	// could see them. The previous readings are kept so the panel opens on the
+	// last known values rather than on zeros.
 	tx := b.readTX()
-	sm, _ := b.readMeter(civ.SubMeterS)
+	watched := b.panelWatched()
-	po, swr := 0, 0
+	b.dspMu.Lock()
-	if tx {
+	sm, po, swr := b.dsp.SMeter, b.dsp.PowerMeter, b.dsp.SWRMeter
-		if v, ok := b.readMeter(civ.SubMeterPo); ok {
+	b.dspMu.Unlock()
-			po = v
+	if watched {
-		}
+		sm, _ = b.readMeter(civ.SubMeterS)
-		if v, ok := b.readMeter(civ.SubMeterSWR); ok {
+		po, swr = 0, 0
-			swr = v
+		if tx {
+			if v, ok := b.readMeter(civ.SubMeterPo); ok {
+				po = v
+			}
+			if v, ok := b.readMeter(civ.SubMeterSWR); ok {
+				swr = v
+			}
 		}
 	}
 	b.dspMu.Lock()
@@ -434,11 +453,15 @@ func (b *IcomSerial) ReadState() (RigState, error) {
 	// snapshot so the panel's antenna, sliders, RIT, notch, etc. reflect the rig
 	// instead of sitting at their zero defaults. Runs once; ↻ Refresh re-reads on
 	// demand, and a reconnect re-arms it (Connect clears dspLoaded).
-	if !b.dspLoaded {
+	// Both of these only make sense for the console — don't spend the bus on them
-		b.readDSP()
+	// while it is closed. The snapshot then loads the first time it is opened.
-		b.dspLoaded = true
+	if watched {
-	} else {
+		if !b.dspLoaded {
-		b.refreshFrontPanel()
+			b.readDSP()
+			b.dspLoaded = true
+		} else {
+			b.refreshFrontPanel()
+		}
 	}
 	return s, nil
 }
@@ -532,12 +555,25 @@ func (b *IcomSerial) SetPower(on bool) error {
 		return fmt.Errorf("icom: not connected")
 	}
 	if on {
-		buf := make([]byte, 0, 32)
+		// The preamble has to last long enough IN TIME for the sleeping rig to
-		for i := 0; i < 25; i++ {
+		// notice it, so its length scales with the baud rate — Icom's own table
+		// asks for 7 bytes at 4800 baud and 150 at 115200, which is a fixed
+		// ~25 ms of carrier. A flat 25 bytes (what this sent before) is right at
+		// 19200 and far too short above it, so a rig configured for 115200 simply
+		// ignored the command.
+		n := b.baud / 768
+		if n < 7 {
+			n = 7
+		} else if n > 150 {
+			n = 150
+		}
+		buf := make([]byte, 0, n+8)
+		for i := 0; i < n; i++ {
 			buf = append(buf, 0xFE)
 		}
 		buf = append(buf, 0xFE, 0xFE, b.rigAddr, civ.AddrController, civ.CmdPower, 0x01, 0xFD)
 		_, err := b.port.Write(buf)
+		applog.Printf("icom: power ON — %d-byte wake preamble at %d baud, addr 0x%02X (err=%v)", n, b.baud, b.rigAddr, err)
 		return err
 	}
 	_, err := b.port.Write(civ.Frame(b.rigAddr, civ.AddrController, civ.CmdPower, 0x00))
@@ -1289,11 +1325,26 @@ func (b *IcomSerial) modeCode(mode string) (code byte, data bool, err error) {
 // ── IcomController: receive-DSP controls for the Icom tab ───────────────────
 
 func (b *IcomSerial) IcomState() IcomTXState {
+	// Asking for the snapshot is what marks the console as being watched, which
+	// is what re-enables the meter polling in ReadState.
+	b.dspWantMu.Lock()
+	b.dspWantAt = time.Now()
+	b.dspWantMu.Unlock()
+
 	b.dspMu.Lock()
 	defer b.dspMu.Unlock()
 	return b.dsp
 }
 
+// panelWatched reports whether the Icom console asked for the DSP snapshot
+// recently — i.e. whether anything is on screen to read the meters.
+func (b *IcomSerial) panelWatched() bool {
+	b.dspWantMu.Lock()
+	at := b.dspWantAt
+	b.dspWantMu.Unlock()
+	return !at.IsZero() && time.Since(at) < 3*time.Second
+}
+
 // RefreshIcom re-reads the whole DSP snapshot from the rig. Runs on the CAT
 // goroutine (dispatched via IcomDo).
 func (b *IcomSerial) RefreshIcom() error {

internal/cat/kenwood.go

@@ -29,6 +29,7 @@ package cat
 // from the radio, and the rig file decides what a "Freq" property means.
 
 import (
+	"bytes"
 	"errors"
 	"fmt"
 	"net"
@@ -71,6 +72,51 @@ type Kenwood struct {
 	curVFO    string // "A" or "B"
 	// Commands this rig answered "?;" to — asked once, then never again.
 	unsupported map[string]bool
+
+	// rx holds bytes read but not yet consumed, ACROSS calls to ask.
+	//
+	// It has to survive: a rig answers faster than we ask, so one Read often
+	// returns a whole reply plus the start of the next frame. When this buffer
+	// was local to ask, everything after the matched frame was dropped — half a
+	// frame included — and the link desynchronised permanently: every ask then
+	// found the PREVIOUS command's answer and timed out waiting for its own.
+	// That is the "discarding \" 000000000010000000;\" while waiting for IF"
+	// a TS-480 reported, followed by connected=false for ever.
+	rx []byte
+
+	// heard is whatever arrived during Connect that was not a reply we wanted.
+	// Kept only to put it in the error message: "not answering" and "answering
+	// something unreadable" are different faults with different fixes.
+	heard string
+
+	// lowerLines deasserts DTR and RTS after opening the port.
+	//
+	// Neither default is safe for everyone, which is why this is a setting and
+	// not a decision. Windows raises both lines on open: an interface that reads
+	// them as PTT then keys the rig for as long as OpsLog is running — reported
+	// as FT8 output power wandering, and gone the moment OpsLog was closed.
+	// Lowering them instead silences the radios whose USB-serial interface needs
+	// RTS asserted to transmit at all — a TS-990 that opened cleanly and answered
+	// nothing. Off by default: that is how this backend behaved for its whole
+	// life before the question came up.
+	lowerLines bool
+}
+
+// SetLowerLines chooses whether DTR and RTS are deasserted on connect. Set
+// before Connect.
+func (k *Kenwood) SetLowerLines(v bool) {
+	k.mu.Lock()
+	k.lowerLines = v
+	k.mu.Unlock()
+}
+
+// where names the link for a message, so an error does not read "COM @ 0 baud"
+// after a network connect.
+func (k *Kenwood) where() string {
+	if k.host != "" {
+		return k.host
+	}
+	return k.portName
 }
 
 // NewKenwoodTCP builds a backend that reaches the rig over a socket instead of
@@ -122,6 +168,14 @@ func (k *Kenwood) Connect() error {
 	// request/response pairs and make a reply impossible to attribute. We poll.
 	_ = k.write("AI0;")
 
+	// Start from silence. A reconnect inherits whatever the rig said last —
+	// unsolicited frames sent before AI0 landed, the tail of an answer nobody
+	// read — and one stale frame is enough to leave every ask one reply behind
+	// its question for the rest of the session.
+	k.rx = nil
+	k.drain(250 * time.Millisecond)
+	k.heard = ""
+
 	answered := false
 	if id, err := k.ask("ID;"); err == nil && strings.HasPrefix(id, "ID") {
 		answered = true
@@ -140,10 +194,22 @@ func (k *Kenwood) Connect() error {
 	}
 	if !answered {
 		k.model = ""
-		if k.host != "" {
+		if k.heard == "" && len(k.rx) > 0 {
-			return fmt.Errorf("kenwood: %s accepted the connection but the rig is not answering — check that the serial bridge points at the radio and that the radio is switched on", k.host)
+			k.heard = string(k.rx) // an unterminated fragment is evidence too
 		}
-		return fmt.Errorf("kenwood: %s opened but the rig is not answering — check that it is switched on and set to %d baud", k.portName, k.baud)
+		// Distinguish silence from noise. "The rig is not answering" sent an
+		// operator checking the power switch and the baud rate on a radio that was
+		// visibly talking — its frames were arriving, they just did not match what
+		// was asked (wrong baud garbles them; an interface echoing our own
+		// commands back produces the same). Say which of the two it is, and quote
+		// what came back, because that is the fact that decides where to look.
+		if seen := k.heard; seen != "" {
+			return fmt.Errorf("kenwood: %s is sending data but no reply to ID; or IF; — got %q. Check the baud rate (set to %d here) and that nothing else is echoing the port", k.where(), seen, k.baud)
+		}
+		if k.host != "" {
+			return fmt.Errorf("kenwood: %s accepted the connection but the rig sent nothing — check that the serial bridge points at the radio and that the radio is switched on", k.host)
+		}
+		return fmt.Errorf("kenwood: %s opened but the rig sent nothing — check that it is switched on and set to %d baud", k.portName, k.baud)
 	}
 	// Name what was actually connected to. A log reading "connected on  @ 0 baud"
 	// after a network connect is the kind of line that sends someone hunting a
@@ -300,6 +366,23 @@ func (k *Kenwood) write(cmd string) error {
 	return err
 }
 
+// drain reads and throws away whatever the rig has already sent, until it stays
+// quiet for one read timeout or the budget runs out.
+func (k *Kenwood) drain(budget time.Duration) {
+	if k.port == nil {
+		return
+	}
+	tmp := make([]byte, 256)
+	deadline := time.Now().Add(budget)
+	for time.Now().Before(deadline) {
+		n, err := k.port.Read(tmp)
+		if err != nil || n == 0 {
+			return // an error here is not interesting: we are throwing this away
+		}
+		traceText("kenwood", "RX-drop", string(tmp[:n]))
+	}
+}
+
 // ask sends a query and returns the reply belonging to THAT command. Anything
 // else on the wire is discarded: a stray frame parsed as a frequency reads as
 // "lost the rig" to the Manager, which then reconnects — the CAT link dropping
@@ -312,25 +395,18 @@ func (k *Kenwood) ask(cmd string) (string, error) {
 	if err := k.write(cmd); err != nil {
 		return "", err
 	}
-	buf := make([]byte, 0, 64)
 	tmp := make([]byte, 64)
 	deadline := time.Now().Add(600 * time.Millisecond)
-	for time.Now().Before(deadline) {
+	for {
-		n, err := k.port.Read(tmp)
+		// Consume whatever is already buffered BEFORE reading more: the answer
-		if err != nil {
+		// may have arrived attached to the previous one.
-			return "", err
-		}
-		if n == 0 {
-			continue // read timeout — the rig may still be composing its answer
-		}
-		buf = append(buf, tmp[:n]...)
 		for {
-			i := strings.IndexByte(string(buf), ';')
+			i := bytes.IndexByte(k.rx, ';')
 			if i < 0 {
 				break
 			}
-			frame := string(buf[:i+1])
+			frame := string(k.rx[:i+1])
-			buf = buf[i+1:]
+			k.rx = k.rx[i+1:]
 			traceText("kenwood", "RX", frame)
 			if frame == "?;" {
 				// The rig rejected the command. Remember it so the poll loop stops
@@ -343,9 +419,25 @@ func (k *Kenwood) ask(cmd string) (string, error) {
 				return frame, nil
 			}
 			debugLog.Printf("kenwood: discarding %q while waiting for %s", frame, want)
+			// Remember the first unexpected frame: if the whole handshake fails, this
+			// is what tells the operator the radio was talking after all.
+			if k.heard == "" {
+				k.heard = frame
+			}
 		}
+		if !time.Now().Before(deadline) {
+			return "", fmt.Errorf("kenwood: timeout answering %q", cmd)
+		}
+		n, err := k.port.Read(tmp)
+		if err != nil {
+			return "", err
+		}
+		if n > 0 {
+			k.rx = append(k.rx, tmp[:n]...)
+		}
+		// n == 0 is a read timeout, not silence for good: the rig may still be
+		// composing its answer.
 	}
-	return "", fmt.Errorf("kenwood: timeout answering %q", cmd)
 }
 
 // ── Frame parsing ──────────────────────────────────────────────────────────
@@ -475,6 +567,10 @@ var kenwoodModels = map[string]string{
 	"019": "TS-2000",
 	"020": "TS-480",
 	"021": "TS-590S",
+	// 022 reported by a real TS-990S in the field. Kenwood's documentation gives
+	// 024 for that radio, so both are kept: the observed value wins where they
+	// disagree, and neither maps to anything else.
+	"022": "TS-990S",
 	"023": "TS-590SG",
 	"024": "TS-990S",
 	"025": "TS-890S",
@@ -492,7 +588,17 @@ func (k *Kenwood) openPort() (serial.Port, error) {
 		}
 		return &tcpSerial{conn: c}, nil
 	}
-	return serial.Open(k.portName, &serial.Mode{BaudRate: k.baud})
+	p, err := serial.Open(k.portName, &serial.Mode{BaudRate: k.baud})
+	if err != nil {
+		return nil, err
+	}
+	// The modem lines are only touched when the operator asks for it. See
+	// lowerLines: both defaults break somebody's station.
+	if k.lowerLines {
+		_ = p.SetDTR(false)
+		_ = p.SetRTS(false)
+	}
+	return p, nil
 }
 
 // tcpSerial presents a TCP connection as a serial.Port, so the backend has one

internal/cat/kenwood_loopback_test.go

@@ -265,8 +265,8 @@ func TestKenwoodSilentRigIsNotConnected(t *testing.T) {
 	if err == nil {
 		t.Fatal("a silent port was reported as a connected rig")
 	}
-	if !strings.Contains(err.Error(), "not answering") {
+	if !strings.Contains(err.Error(), "sent nothing") {
-		t.Errorf("error was %q — it should say the rig is not answering", err)
+		t.Errorf("error was %q — a silent port should be reported as silence", err)
 	}
 	if k.model != "" {
 		t.Errorf("a stale model survived a failed connect: %q", k.model)
@@ -355,3 +355,26 @@ func TestKenwoodSplitWhenFRFTRejected(t *testing.T) {
 		t.Errorf("IF-reported split broke: split=%v tx=%d rx=%d", s.Split, s.FreqHz, s.RxFreqHz)
 	}
 }
+
+// A rig that talks but never answers what was asked must not be reported as a
+// silent one.
+//
+// The two faults need opposite responses: silence means the radio is off, the
+// wrong port, or a dead cable; noise means the baud rate is wrong or something
+// is echoing the line. "The rig is not answering" sent an operator checking the
+// power switch on a radio whose frames were visibly arriving.
+func TestKenwoodNoisyRigIsReportedAsNoiseNotSilence(t *testing.T) {
+	k := NewKenwood("COM-TEST", 9600, "FT8")
+	k.dialPort = func() (serial.Port, error) {
+		return &fakeSerial{toRig: &strings.Builder{}, answer: func(cmd string) string {
+			return "XX9999;" // something, but never the reply to ID; or IF;
+		}}, nil
+	}
+	err := k.Connect()
+	if err == nil {
+		t.Fatal("a rig answering gibberish was reported as connected")
+	}
+	if !strings.Contains(err.Error(), "sending data") || !strings.Contains(err.Error(), "XX9999;") {
+		t.Errorf("error was %q — it should say data arrived, and quote it", err)
+	}
+}

internal/cat/xiegu.go

@@ -56,6 +56,9 @@ type Xiegu struct {
 	// asking every cycle — a Xiegu that has no split must not cost a timeout per
 	// poll, which would slow the whole loop to a crawl.
 	splitSupported bool
+	// pttLine is "", "rts" or "dtr": which hardware line keys the rig, when the
+	// CI-V command does not.
+	pttLine string
 }
 
 func NewXiegu(portName string, baud int, addr int, digital string) *Xiegu {
@@ -74,6 +77,14 @@ func NewXiegu(portName string, baud int, addr int, digital string) *Xiegu {
 	}
 }
 
+// SetPTTLine selects the hardware line that keys this rig: "rts", "dtr", or ""
+// for the CI-V command. Set before Connect.
+func (x *Xiegu) SetPTTLine(line string) {
+	x.mu.Lock()
+	x.pttLine = strings.ToLower(strings.TrimSpace(line))
+	x.mu.Unlock()
+}
+
 func (x *Xiegu) Name() string { return "xiegu" }
 
 func (x *Xiegu) Connect() error {
@@ -87,6 +98,20 @@ func (x *Xiegu) Connect() error {
 		return fmt.Errorf("xiegu: open %s @ %d baud: %w", x.portName, x.baud, err)
 	}
 	p.SetReadTimeout(200 * time.Millisecond)
+	// Deassert DTR and RTS.
+	//
+	// Windows raises both when a serial port is opened, and a great many
+	// interfaces read them as PTT: a Xiegu G90 behind a DE-19 goes into
+	// transmit the moment OpsLog connects and STAYS there — Xiegu's own
+	// documentation asks for RTS and DTR low. The same applies to an Icom with
+	// USB SEND mapped to a line (which is why the CI-V backend has done this
+	// from the start) and to any rig keyed by a home-made cable.
+	//
+	// PTT on this backend is a CAT command, so neither line should ever be
+	// asserted here. A station keying by RTS/DTR configures that separately,
+	// on its own port.
+	_ = p.SetDTR(false)
+	_ = p.SetRTS(false)
 	x.port = p
 	x.splitSupported = true
 
@@ -177,12 +202,25 @@ func (x *Xiegu) SetMode(mode string) error {
 	return x.send(civ.CmdSetMode, m)
 }
 
+// SetPTT keys the transmitter, by CI-V or by a hardware line.
+//
+// A G90 does not transmit on the CI-V PTT command. Xiegu's own interfaces key
+// on RTS or DTR instead — the DE-19 does exactly that — which is why the line
+// can be selected here. Without it, WSJT-X talking to OpsLog's rigctld server
+// decoded perfectly and never transmitted: the command left, the radio ignored
+// it, and nothing in the chain was wrong enough to complain.
 func (x *Xiegu) SetPTT(on bool) error {
 	x.mu.Lock()
 	defer x.mu.Unlock()
 	if x.port == nil {
 		return fmt.Errorf("xiegu: not connected")
 	}
+	switch x.pttLine {
+	case "rts":
+		return x.port.SetRTS(on)
+	case "dtr":
+		return x.port.SetDTR(on)
+	}
 	v := byte(0x00)
 	if on {
 		v = 0x01

internal/cat/yaesu.go

@@ -82,9 +82,12 @@ var yaesuModeToADIF = map[byte]string{
 }
 
 type Yaesu struct {
-	portName string
+	// lowerLines deasserts DTR and RTS on connect — see Kenwood.lowerLines for
-	baud     int
+	// why neither default is safe for every station.
-	digital  string // ADIF mode reported for DATA (FT8, RTTY…)
+	lowerLines bool
+	portName   string
+	baud       int
+	digital    string // ADIF mode reported for DATA (FT8, RTTY…)
 
 	mu   sync.Mutex
 	port serial.Port
@@ -127,6 +130,14 @@ func NewYaesu(portName string, baud int, digital string) *Yaesu {
 	return &Yaesu{portName: strings.TrimSpace(portName), baud: baud, digital: digital, curVFO: "A"}
 }
 
+// SetLowerLines chooses whether DTR and RTS are deasserted on connect. Set
+// before Connect.
+func (y *Yaesu) SetLowerLines(v bool) {
+	y.mu.Lock()
+	y.lowerLines = v
+	y.mu.Unlock()
+}
+
 func (y *Yaesu) Name() string { return "yaesu" }
 
 func (y *Yaesu) Connect() error {
@@ -150,6 +161,12 @@ func (y *Yaesu) Connect() error {
 	if err != nil {
 		return fmt.Errorf("yaesu: open %s @ %d baud: %w", y.portName, y.baud, err)
 	}
+	// The modem lines are only touched when the operator asks for it — see the
+	// note on Kenwood.lowerLines. Both defaults break somebody's station.
+	if y.lowerLines {
+		_ = p.SetDTR(false)
+		_ = p.SetRTS(false)
+	}
 	p.SetReadTimeout(300 * time.Millisecond)
 	y.port = p
 

internal/integrations/udp/server.go

@@ -196,7 +196,6 @@ func (s *Server) run() {
 }
 
 func (s *Server) handle(pkt []byte, remote *net.UDPAddr) {
-	applog.Printf("udp: [%s] rx %d bytes from %s\n", s.cfg.Name, len(pkt), remote)
 	ev := Event{ConfigID: s.cfg.ID, Service: s.cfg.ServiceType, Source: remote.String()}
 	switch s.cfg.ServiceType {
 	case ServiceWSJT:
@@ -229,8 +228,12 @@ func (s *Server) handle(pkt []byte, remote *net.UDPAddr) {
 			ev.Mode = w.Mode
 			break
 		}
-		applog.Printf("udp: [%s] WSJT decoded: prog=%q dx_call=%q grid=%q mode=%q freq=%d adif_len=%d\n",
+		// Only a logged QSO is worth a line — WSJT-X/MSHV send a Status packet
-			s.cfg.Name, w.ProgramID, w.DXCall, w.DXGrid, w.Mode, w.FreqHz, len(w.LoggedADIF))
+		// every second, and logging each one buried the rest of the file.
+		if len(w.LoggedADIF) > 0 {
+			applog.Printf("udp: [%s] WSJT QSO logged: prog=%q dx_call=%q grid=%q mode=%q freq=%d adif_len=%d\n",
+				s.cfg.Name, w.ProgramID, w.DXCall, w.DXGrid, w.Mode, w.FreqHz, len(w.LoggedADIF))
+		}
 		ev.DXCall = w.DXCall
 		ev.DXGrid = w.DXGrid
 		ev.Mode = w.Mode

internal/powergenius/powergenius.go

@@ -9,6 +9,7 @@ package powergenius
 import (
 	"bufio"
 	"fmt"
+	"math"
 	"net"
 	"strconv"
 	"strings"
@@ -36,6 +37,16 @@ type Status struct {
 	FanMode     string  `json:"fan_mode,omitempty"` // STANDARD / CONTEST / BROADCAST
 	Temperature float64 `json:"temperature"`
 	Operate     bool    `json:"operate"` // OPERATE vs STANDBY (optimistic until the amp reports it)
+
+	// Live power, read straight from the amplifier's own status frame rather
+	// than sampled off the FlexRadio meter stream. PeakW is the amp's own peak
+	// detector: a poll catches one instant of the envelope, so the plain forward
+	// figure lands between syllables as often as on a peak.
+	FwdW   float64 `json:"fwd_w"`   // forward power [W] (the frame reports dBm)
+	PeakW  float64 `json:"peak_w"`  // peak forward power [W]
+	Vswr   float64 `json:"vswr"`    // VSWR, derived from the frame's return loss in dB
+	Id     float64 `json:"id"`      // drain current [A]
+	PeakId float64 `json:"peak_id"` // peak drain current [A]
 }
 
 type Client struct {
@@ -226,9 +237,9 @@ func (c *Client) parse(resp string) {
 	c.statusMu.Lock()
 	c.status.Connected = true
 	c.status.LastError = ""
-	// Log each DISTINCT status payload once: the PGXL's field set isn't fully
+	// One raw frame per session is enough to learn the field set — the frames
-	// documented, so this is how we learn the real key for e.g. operate/standby.
+	// carry live meter values, so "log on change" logged every frame.
-	if data != c.lastRaw {
+	if c.lastRaw == "" {
 		c.lastRaw = data
 		applog.Printf("pgxl: status raw=%q", data)
 	}
@@ -252,7 +263,50 @@ func (c *Client) parse(resp string) {
 			c.status.FanMode = dev
 		case "temp":
 			c.status.Temperature, _ = strconv.ParseFloat(kv[1], 64)
+		case "fwd":
+			if v, err := strconv.ParseFloat(kv[1], 64); err == nil {
+				c.status.FwdW = dbmToWatts(v)
+			}
+		case "peakfwd":
+			if v, err := strconv.ParseFloat(kv[1], 64); err == nil {
+				c.status.PeakW = dbmToWatts(v)
+			}
+		case "swr":
+			if v, err := strconv.ParseFloat(kv[1], 64); err == nil {
+				c.status.Vswr = returnLossToVswr(v)
+			}
+		case "id":
+			c.status.Id, _ = strconv.ParseFloat(kv[1], 64)
+		case "peakid":
+			c.status.PeakId, _ = strconv.ParseFloat(kv[1], 64)
 		}
 	}
 	c.statusMu.Unlock()
 }
+
+// dbmToWatts converts a power reading in dBm to watts (0 dBm = 1 mW). The amp
+// reports power that way — "fwd=60.5" is 1122 W, not 60 W.
+func dbmToWatts(dbm float64) float64 {
+	if dbm <= 0 {
+		return 0
+	}
+	return math.Pow(10, (dbm-30)/10)
+}
+
+// returnLossToVswr converts the amp's "swr" field — a return loss in dB, sent
+// negative for a good match — into the VSWR ratio an operator reads.
+func returnLossToVswr(swrDb float64) float64 {
+	rl := math.Abs(swrDb)
+	if rl <= 0 {
+		return 0
+	}
+	rho := math.Pow(10, -rl/20)
+	if rho >= 1 {
+		return 0
+	}
+	vswr := (1 + rho) / (1 - rho)
+	if vswr > 99.9 || math.IsInf(vswr, 0) || math.IsNaN(vswr) {
+		return 0
+	}
+	return vswr
+}

internal/qso/qso.go

@@ -2061,6 +2061,41 @@ func (r *Repo) WorkedCountyKeys(ctx context.Context, keyFn func(state, cnty stri
 	return out, rows.Err()
 }
 
+// CountyWorked reports whether one US county has already been worked.
+//
+// It exists so the entry panel can flag a new county without loading the whole
+// worked-county set on every keystroke — the county arrives from a QRZ lookup,
+// which is exactly when the operator is deciding whether the contact is worth
+// chasing. The comparison goes through keyFn on both sides (rather than a SQL
+// equality) because logged county spellings vary — "Los Angeles" against
+// "LOS ANGELES, CA" — and the key function is what already resolves that
+// everywhere else.
+func (r *Repo) CountyWorked(ctx context.Context, state, cnty string, keyFn func(state, cnty string) string) (bool, error) {
+	want := keyFn(state, cnty)
+	if want == "" {
+		return false, nil
+	}
+	// Narrowed to the one state: a few dozen rows, not the whole logbook.
+	rows, err := r.db.QueryContext(ctx,
+		`SELECT DISTINCT COALESCE(state,''), COALESCE(cnty,'') FROM qso
+		 WHERE dxcc IN (291,110,6) AND cnty IS NOT NULL AND cnty != ''
+		   AND upper(COALESCE(state,'')) = upper(?)`, strings.TrimSpace(state))
+	if err != nil {
+		return false, err
+	}
+	defer rows.Close()
+	for rows.Next() {
+		var st, cn string
+		if err := rows.Scan(&st, &cn); err != nil {
+			return false, err
+		}
+		if keyFn(st, cn) == want {
+			return true, nil
+		}
+	}
+	return false, rows.Err()
+}
+
 // WorkedCallBandModeKeys returns the set of every worked "CALL|BAND|MODE" key
 // (all upper-cased), loaded in one pass. It backs the in-memory worked-index the
 // alert engine checks per cluster spot — a DB query per spot cannot keep up with

internal/relaydev/relaydev.go

@@ -7,6 +7,10 @@
 //   - KMTronic LAN 8-relay WEB board — 8 relays. Control: GET /FF{rr}{ss}
 //     (rr = 01..08, ss = 01 on / 00 off); status: GET /status.xml with
 //     <relay1>..<relay8> (relay0 is reserved). Optional HTTP basic auth.
+//   - Dingtian IOT relay (DTWONDER) — 2/4/8/16/24/32 relays over its HTTP GET
+//     CGI. Control: GET /relay_cgi.cgi?type=0&relay=N&on=1&time=0&pwd=P&;
+//     status: GET /relay_cgi_load.cgi. Both answer &-separated fields.
+//     (IOT Relay Programming Manual V1.9.8.1, §3.)
 //
 // A Device presents the same surface to the app regardless of wire protocol.
 package relaydev
@@ -173,3 +177,119 @@ func (k *kmtronic) Status(ctx context.Context) ([]bool, error) {
 	}
 	return out, nil
 }
+
+// ── Dingtian IOT relay (DTWONDER) ──────────────────────────────────────
+//
+// The board speaks several protocols (Modbus, MQTT, CoAP, its own binary); we
+// use the HTTP GET CGI, which needs no connection state and matches how the
+// other network boards here are driven.
+//
+// Both endpoints answer &-separated fields, first one 0 on success:
+//
+//	/relay_cgi_load.cgi                                  → &0&4&1&0&1&0&
+//	                                                       result, count, r1…rN
+//	/relay_cgi.cgi?type=0&relay=0&on=1&time=0&pwd=0&     → &0&0&0&1&0&
+//	                                                       result, type, relay, on, time
+//
+// NOTE the relay index in the URL is ZERO-based (relay=0 is relay 1), while the
+// Device interface is 1-based like every other board here.
+type dingtian struct {
+	host    string
+	session string // optional: the board can require "Cookie: session=<id>"
+	pwd     string // CGI password, 0–9999; "0" (or blank) when none is set
+	count   int
+}
+
+// NewDingtian builds a Dingtian IOT relay client. session is the HTTP session ID
+// when the board has "HTTP Session" enabled (blank otherwise); pwd is its relay
+// password (blank or "0" when none).
+func NewDingtian(host, session, pwd string, count int) Device {
+	if count <= 0 {
+		count = 2
+	}
+	if strings.TrimSpace(pwd) == "" {
+		pwd = "0"
+	}
+	return &dingtian{host: host, session: strings.TrimSpace(session), pwd: strings.TrimSpace(pwd), count: count}
+}
+
+func (d *dingtian) Count() int   { return d.count }
+func (d *dingtian) Close() error { return nil } // stateless HTTP, nothing to release
+
+// getCGI issues the GET with the session cookie the board may require.
+func (d *dingtian) getCGI(ctx context.Context, url string) ([]byte, error) {
+	req, err := http.NewRequestWithContext(ctx, http.MethodGet, url, nil)
+	if err != nil {
+		return nil, err
+	}
+	if d.session != "" {
+		req.Header.Set("Cookie", "session="+d.session)
+	}
+	resp, err := httpClient().Do(req)
+	if err != nil {
+		return nil, err
+	}
+	defer resp.Body.Close()
+	body, _ := io.ReadAll(resp.Body)
+	if resp.StatusCode < 200 || resp.StatusCode >= 300 {
+		return nil, fmt.Errorf("http %d: %s", resp.StatusCode, strings.TrimSpace(string(body)))
+	}
+	return body, nil
+}
+
+// dtFields splits an &-separated CGI reply into its fields, dropping the empty
+// ones the leading and trailing "&" produce.
+func dtFields(body []byte) []string {
+	var out []string
+	for _, f := range strings.Split(strings.TrimSpace(string(body)), "&") {
+		if f = strings.TrimSpace(f); f != "" {
+			out = append(out, f)
+		}
+	}
+	return out
+}
+
+func (d *dingtian) Set(ctx context.Context, relay int, on bool) error {
+	if relay < 1 || relay > d.count {
+		return fmt.Errorf("relay %d out of range 1..%d", relay, d.count)
+	}
+	state := 0
+	if on {
+		state = 1
+	}
+	// type=0 is plain ON/OFF (1 = jogging, 2 = delay, 3 = flash, 4 = toggle),
+	// and time is then unused.
+	body, err := d.getCGI(ctx, fmt.Sprintf("http://%s/relay_cgi.cgi?type=0&relay=%d&on=%d&time=0&pwd=%s&",
+		d.host, relay-1, state, d.pwd))
+	if err != nil {
+		return err
+	}
+	// A wrong password or session answers 200 with a non-zero result (e.g.
+	// "&302&/&"), so the HTTP status alone does not tell us it worked.
+	if f := dtFields(body); len(f) == 0 || f[0] != "0" {
+		return fmt.Errorf("dingtian: refused (%s) — check the relay password and the HTTP session ID",
+			strings.TrimSpace(string(body)))
+	}
+	return nil
+}
+
+func (d *dingtian) Status(ctx context.Context) ([]bool, error) {
+	body, err := d.getCGI(ctx, fmt.Sprintf("http://%s/relay_cgi_load.cgi", d.host))
+	if err != nil {
+		return nil, err
+	}
+	f := dtFields(body)
+	if len(f) < 2 || f[0] != "0" {
+		return nil, fmt.Errorf("dingtian: bad status reply %q", strings.TrimSpace(string(body)))
+	}
+	// The board reports its own relay count; trust it over the configured one so
+	// a mis-set channel count doesn't silently hide relays.
+	if n, e := strconv.Atoi(f[1]); e == nil && n > 0 && n <= 32 {
+		d.count = n
+	}
+	out := make([]bool, d.count)
+	for i := 0; i < d.count && i+2 < len(f); i++ {
+		out[i] = f[i+2] == "1"
+	}
+	return out, nil
+}

internal/relaydev/relaydev_test.go

@@ -99,3 +99,76 @@ func TestKMTronicSetURL(t *testing.T) {
 	}
 	_ = d.Set(context.Background(), 1, false) // → /FF0100
 }
+
+// Dingtian — the wire examples come straight from the IOT Relay Programming
+// Manual V1.9.8.1 §3.1/§3.2. The two traps pinned here: the URL relay index is
+// ZERO-based while the Device interface is 1-based, and a refusal (bad password
+// or session) answers HTTP 200 with a non-zero first field.
+
+func TestDingtianStatus(t *testing.T) {
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		if r.URL.Path != "/relay_cgi_load.cgi" {
+			t.Errorf("unexpected status path %q", r.URL.Path)
+		}
+		// Manual's own example: ok, 4 relays, 1 on, 2 off, 3 on, 4 off.
+		_, _ = w.Write([]byte("&0&4&1&0&1&0&"))
+	}))
+	defer srv.Close()
+
+	d := NewDingtian(strings.TrimPrefix(srv.URL, "http://"), "", "", 2)
+	st, err := d.Status(context.Background())
+	if err != nil {
+		t.Fatal(err)
+	}
+	// The board said 4 relays even though 2 were configured — its count wins.
+	want := []bool{true, false, true, false}
+	if len(st) != len(want) {
+		t.Fatalf("got %d relays, want %d", len(st), len(want))
+	}
+	for i := range want {
+		if st[i] != want[i] {
+			t.Errorf("relay %d = %v, want %v", i+1, st[i], want[i])
+		}
+	}
+	if d.Count() != 4 {
+		t.Errorf("Count() = %d, want 4 (taken from the board)", d.Count())
+	}
+}
+
+func TestDingtianSetUsesZeroBasedIndexAndSession(t *testing.T) {
+	var gotQuery, gotCookie string
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		gotQuery = r.URL.RawQuery
+		gotCookie = r.Header.Get("Cookie")
+		_, _ = w.Write([]byte("&0&0&2&1&0&"))
+	}))
+	defer srv.Close()
+
+	d := NewDingtian(strings.TrimPrefix(srv.URL, "http://"), "12345678", "4660", 4)
+	if err := d.Set(context.Background(), 3, true); err != nil {
+		t.Fatal(err)
+	}
+	if !strings.Contains(gotQuery, "relay=2") {
+		t.Errorf("relay 3 must go out as relay=2 (zero-based); query was %q", gotQuery)
+	}
+	if !strings.Contains(gotQuery, "on=1") || !strings.Contains(gotQuery, "type=0") ||
+		!strings.Contains(gotQuery, "pwd=4660") {
+		t.Errorf("unexpected query %q", gotQuery)
+	}
+	if gotCookie != "session=12345678" {
+		t.Errorf("session cookie = %q, want session=12345678", gotCookie)
+	}
+}
+
+func TestDingtianSetRefusalIsAnError(t *testing.T) {
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
+		// Manual §3.4.4: a bad session still answers 200 OK.
+		_, _ = w.Write([]byte("&302&/&"))
+	}))
+	defer srv.Close()
+
+	d := NewDingtian(strings.TrimPrefix(srv.URL, "http://"), "", "", 2)
+	if err := d.Set(context.Background(), 1, true); err == nil {
+		t.Fatal("a refused command answered HTTP 200 and was reported as success")
+	}
+}

internal/spe/spe.go

@@ -33,13 +33,11 @@ const (
 	cmdOperate byte = 0x0D // toggles STANDBY ↔ OPERATE (confirmed on hw)
 	cmdStatus  byte = 0x90 // request the status string
 
-	// Best-guess keystroke codes reconstructed from the APG command table after
+	// From the official APG rev 1.1 command table. Note POWER does NOT switch a
-	// correcting the PDF's note-wrap misalignment (anchored to the confirmed
+	// sleeping amp on (that is the RTS/DTR wake, see PowerOn) — on a running amp
-	// OPERATE=0x0D): OFF=0x0A, POWER=0x0B. The POWER key doubles as power-on (when
+	// it cycles the output level L→M→H, which is all we use it for.
-	// the amp is off) and the output-level cycle L→M→H (when it's on) — same as the
+	cmdOff   byte = 0x0A // SWITCH OFF key — how PowerOff switches the amp off
-	// single physical POWER button. To be verified on hardware.
+	cmdPower byte = 0x0B // POWER key — cycles the output power level
-	cmdOff   byte = 0x0A // OFF key — switch the amplifier off
-	cmdPower byte = 0x0B // POWER key — turn on / cycle output power level
 
 	syncHost = 0x55
 	syncAmp  = 0xAA
@@ -47,11 +45,16 @@ const (
 	dialTimeout = 5 * time.Second
 	ioTimeout   = 3 * time.Second
 	pollEvery   = 800 * time.Millisecond
+
+	// How long a modem line is held LOW before being raised again, to give the
+	// amp's edge-triggered remote-on input a transition it can see.
+	wakePulse = time.Second
 )
 
 // Status is the decoded amplifier state for the UI.
 type Status struct {
 	Connected  bool    `json:"connected"`
+	Transport  string  `json:"transport"` // "serial" | "tcp" — the UI enables power-ON on serial even when asleep
 	LastError  string  `json:"last_error,omitempty"`
 	Model      string  `json:"model,omitempty"`       // "20K" / "13K"
 	Operate    bool    `json:"operate"`               // true = OPERATE, false = STANDBY
@@ -91,6 +94,8 @@ type Client struct {
 
 	stop    chan struct{}
 	running bool
+
+	lastConnErr string // last connect failure logged (log only on change)
 }
 
 func New(cfg Config) *Client {
@@ -123,7 +128,13 @@ func (c *Client) Stop() {
 func (c *Client) GetStatus() Status {
 	c.statusMu.RLock()
 	defer c.statusMu.RUnlock()
-	return c.status
+	s := c.status
+	if c.cfg.Transport == "tcp" {
+		s.Transport = "tcp"
+	} else {
+		s.Transport = "serial"
+	}
+	return s
 }
 
 func (c *Client) setErr(err error) {
@@ -146,27 +157,79 @@ func (c *Client) Operate(on bool) error {
 // ToggleOperate flips STANDBY/OPERATE unconditionally.
 func (c *Client) ToggleOperate() error { return c.sendCmd(cmdOperate) }
 
-// PowerOn turns the amplifier on. Per the SPE manual this is NOT a data command
+// PowerOn switches the amplifier on with a RISING EDGE on RTS, then on DTR.
-// but a hardware DTR pulse on the serial line (the "Remote_ON" pin), which needs
+//
-// the special SPE cable — so it only applies to the serial transport. Over TCP
+// Confirmed on a live 1.3K-FA. The remote-on input is EDGE-triggered, which is
-// there is no DTR line and power-on isn't possible remotely.
+// why holding the lines high does nothing: a plain port open already leaves both
+// high (the serial library's default), so there is no transition left to give.
+// Hence low → pause → high on each line, in that order. The keystroke route is a
+// dead end — a switched-off amp does not answer its UART at all, and the POWER
+// key (0x0B) merely cycles L/M/H on an amp that is already running.
+//
+// Serial only: over TCP there are no modem lines. The port is (re)opened first,
+// since the poll loop has dropped the connection to a sleeping amp long before
+// the user clicks ON.
 func (c *Client) PowerOn() error {
+	if c.cfg.Transport == "tcp" {
+		return fmt.Errorf("power-on needs the serial RTS/DTR lines; not available over a network bridge")
+	}
+	// On an amp that is already awake there is nothing to wake.
+	if c.GetStatus().Connected {
+		return nil
+	}
+	// The poll goroutine may still be inside a blocking read on the old handle;
+	// Windows keeps the port "busy" until that read times out (ioTimeout). Retry
+	// the open for a little longer than that.
+	var err error
+	deadline := time.Now().Add(ioTimeout + 3*time.Second)
+	for {
+		if err = c.ensureConn(); err == nil || time.Now().After(deadline) {
+			break
+		}
+		time.Sleep(200 * time.Millisecond)
+	}
+	if err != nil {
+		applog.Printf("spe: power ON failed — cannot open %s: %v", c.cfg.ComPort, err)
+		return fmt.Errorf("power-on: %w", err)
+	}
 	c.mu.Lock()
-	defer c.mu.Unlock()
 	sp, ok := c.conn.(serial.Port)
+	c.mu.Unlock()
 	if !ok {
-		return fmt.Errorf("power-on needs the serial DTR line (special SPE cable); not available over network")
+		return fmt.Errorf("power-on needs a serial connection")
 	}
-	// A single positive pulse (~1.2s) on DTR, as the manual describes.
+	pulse := func(set func(bool) error) error {
-	if err := sp.SetDTR(true); err != nil {
+		if err := set(false); err != nil {
-		return err
+			return err
+		}
+		time.Sleep(wakePulse)
+		return set(true)
 	}
-	time.Sleep(1200 * time.Millisecond)
+	if err = pulse(sp.SetRTS); err == nil {
-	return sp.SetDTR(false)
+		err = pulse(sp.SetDTR)
+	}
+	// Booting, the amp re-enumerates its USB interface, which leaves this handle
+	// pointing at a device that no longer exists — the amp came up and OpsLog
+	// still read "offline". Drop it; the poll loop reopens a fresh one as soon as
+	// the port is back.
+	c.mu.Lock()
+	c.dropLocked()
+	c.mu.Unlock()
+	applog.Printf("spe: power ON — RTS then DTR pulsed on %s (err=%v)", c.cfg.ComPort, err)
+	return err
 }
 
-// PowerOff presses the OFF key (switches the amp off).
+// PowerOff presses the SWITCH OFF key (0x0A) — the amp is running, so it hears
-func (c *Client) PowerOff() error { return c.sendCmd(cmdOff) }
+// its UART. Dropping DTR then RTS switches it off too (it is the mirror of the
+// wake, and does work when done by hand), but back-to-back from one click it
+// did not, while this keystroke has never once failed. The amp then stays off:
+// the poll loop keeps reopening the port with both lines high and that has
+// never woken it — only the deliberate low→high sequence in PowerOn does.
+func (c *Client) PowerOff() error {
+	err := c.sendCmd(cmdOff)
+	applog.Printf("spe: power OFF — SWITCH OFF key sent (err=%v)", err)
+	return err
+}
 
 // SetPowerLevel cycles the output power level (L/M/H) to the requested one by
 // tapping the POWER key (0x0B) and WAITING for the amp to actually report the new
@@ -206,9 +269,16 @@ func (c *Client) pollLoop() {
 			return
 		case <-t.C:
 			if err := c.ensureConn(); err != nil {
+				// Logged once per distinct message: "the amp is on but OpsLog
+				// says offline" was impossible to diagnose without the reason.
+				if msg := err.Error(); msg != c.lastConnErr {
+					c.lastConnErr = msg
+					applog.Printf("spe: connect %s failed: %s", c.cfg.ComPort, msg)
+				}
 				c.setErr(fmt.Errorf("connect: %w", err))
 				continue
 			}
+			c.lastConnErr = ""
 			// The amp streams status frames faster than one per poll, so a backlog
 			// builds up and we'd read stale frames (the display lagged ~15s behind
 			// the real amp). Flush anything pending, THEN request + read exactly one
@@ -239,16 +309,48 @@ func (c *Client) ensureConn() error {
 		nc, err = net.DialTimeout("tcp", net.JoinHostPort(c.cfg.Host, strconv.Itoa(c.cfg.Port)), dialTimeout)
 		rwc = nc
 	} else {
-		rwc, err = serial.Open(c.cfg.ComPort, &serial.Mode{BaudRate: c.cfg.Baud})
+		var sp serial.Port
+		// Plain open: both modem lines come up high (the library's default), which
+		// is what the interface needs to talk. That is not enough to switch the amp
+		// on — the remote-on input wants the deliberate low→high sequence PowerOn
+		// sends — so reconnecting never wakes an amplifier the operator switched
+		// off, and forcing either line low here would switch a running one off.
+		sp, err = serial.Open(c.cfg.ComPort, &serial.Mode{BaudRate: c.cfg.Baud})
+		if err == nil {
+			// Without this, a read on a sleeping amp blocks forever inside the
+			// Windows serial driver — the poll goroutine survived the window and
+			// the process took ~a minute to die.
+			_ = sp.SetReadTimeout(ioTimeout)
+			rwc = sp
+		}
 	}
 	if err != nil {
 		return err
 	}
 	c.conn = rwc
-	c.r = bufio.NewReader(rwc)
+	if sp, ok := rwc.(serial.Port); ok {
+		// The driver reports a read timeout as "0 bytes, no error", which bufio
+		// spins on; surface it as a real error so the poll loop drops and retries.
+		c.r = bufio.NewReader(serialTimeoutReader{sp})
+	} else {
+		c.r = bufio.NewReader(rwc)
+	}
 	return nil
 }
 
+// serialTimeoutReader converts the serial driver's timeout convention (n=0,
+// err=nil once SetReadTimeout expires) into an explicit error, so a bufio
+// reader fails fast instead of retrying an amp that is asleep.
+type serialTimeoutReader struct{ p serial.Port }
+
+func (s serialTimeoutReader) Read(b []byte) (int, error) {
+	n, err := s.p.Read(b)
+	if n == 0 && err == nil {
+		return 0, fmt.Errorf("spe: read timeout")
+	}
+	return n, err
+}
+
 func (c *Client) dropLocked() {
 	if c.conn != nil {
 		c.conn.Close()
@@ -361,9 +463,10 @@ func (c *Client) decodeCSV(payload string) {
 
 	c.statusMu.Lock()
 	defer c.statusMu.Unlock()
-	// Log the raw status frame ONCE per change, so field alignment can be verified
+	// One raw frame per session is enough to verify field alignment against real
-	// against real hardware (the doc's 19-field layout may differ per firmware).
+	// hardware — the frame carries live meter values, so logging each change
-	if payload != c.lastRaw {
+	// meant logging nearly every frame.
+	if c.lastRaw == "" {
 		c.lastRaw = payload
 		applog.Printf("spe: status raw=%q fields=%d", payload, len(f))
 	}

internal/tunergenius/tunergenius.go

@@ -61,6 +61,7 @@ type Status struct {
 
 	FwdDbm float64 `json:"fwd_dbm"` // forward power [dBm], as reported
 	FwdW   float64 `json:"fwd_w"`   // forward power [W], derived from dBm
+	PeakW  float64 `json:"peak_w"`  // the device's own peak forward power [W] — what the meters show
 	SwrDb  float64 `json:"swr_db"`  // return loss [dB] as reported (negative = good match)
 	Vswr   float64 `json:"vswr"`    // VSWR ratio, derived from swr_db (1.0 = perfect)
 
@@ -405,7 +406,9 @@ func (c *Client) parse(resp string) {
 	if !strings.HasPrefix(data, "status") {
 		return
 	}
-	if data != c.lastRaw {
+	// One raw frame per session is enough to verify field alignment — the
+	// frames carry live meter values, so "log on change" logged every frame.
+	if c.lastRaw == "" {
 		c.lastRaw = data
 		applog.Printf("tunergenius: status raw=%q", data)
 	}
@@ -439,6 +442,13 @@ func (c *Client) applyStatus(data string) {
 		c.status.FwdDbm = v
 		c.status.FwdW = dbmToWatts(v)
 	}
+	// The device's OWN peak detector. A poll samples one instant of the envelope,
+	// so on SSB the plain "fwd" figure lands between syllables as often as on a
+	// peak — the widget read a few hundred watts on a kilowatt transmission. This
+	// is the number to display.
+	if v, ok := parseFloat(kv["peak"]); ok {
+		c.status.PeakW = dbmToWatts(v)
+	}
 	if v, ok := parseFloat(kv["swr"]); ok {
 		c.status.SwrDb = v
 		c.status.Vswr = returnLossToVswr(v)

telemetry.go

@@ -21,7 +21,7 @@ import (
 
 const (
 	// appVersion is stamped on every heartbeat (and could feed the About box).
-	appVersion = "0.22.6"
+	appVersion = "0.23.1"
 
 	// posthogHost is the PostHog ingestion endpoint. EU cloud by default; change
 	// to https://us.i.posthog.com for a US project.

wiki/Amplifiers-and-Switches.md

@@ -1,13 +1,47 @@
 # Amplifiers and Switches
 
-## PowerGenius XL (4O3A) amplifier
+## Amplifiers
 
-Direct TCP connection (Settings → PowerGenius):
+Settings → **Amplifier** is a **list**: configure several amps (e.g. two SPEs
+run in parallel), each with its own name and connection. Brands:
 
-- **Operate / Standby** and **fault** display.
+- **SPE Expert** (1.3K / 1.5K / 2K) — USB serial or an RS232-to-Ethernet
-- **Fan-mode** selector (Standard / Contest / Broadcast).
+  bridge. OPERATE/STANDBY, ON/OFF, Low/Mid/High power level, live status.
-- When a Flex is connected, the amp controls + its **FWD / ID / TEMP** meters
+  Switching the amplifier **on and off** uses the remote-on control lines, so
-  appear in the FlexRadio panel's Amplifier card. See [[FlexRadio]].
+  it needs the **USB (or RS-232) connection**, not a network bridge — the ON
+  button works even while the amplifier is off and reporting nothing.
+- **ACOM** (500S / 600S / 700S / 1200S / 2020S) — serial or bridge.
+  OPERATE/STANDBY/OFF, live power / SWR / PA temperature / band / fan.
+  Power-ON works over serial when the cable wires the DTR/RTS pins.
+- **PowerGenius XL** (4O3A) — direct TCP. Operate/Standby, fault display, and a
+  **fan-mode** selector (Standard / Contest / Broadcast).
+
+Where the controls appear:
+
+- An **amplifier card** in the FlexRadio panel and in **Station Control**:
+  OPERATE/STANDBY, ON/OFF, power level, output-power bar and live FWD /
+  drain-current / temperature meters. Several amps → one card each.
+- A **status chip per amp** in the bottom bar: green ON AIR = OPERATE, orange =
+  STANDBY, red = offline. Clicking it toggles OPERATE/STANDBY.
+- A **docked widget** (flame icon, next to the keyers): Operate, power ON/OFF,
+  the SPE power level and live watts / SWR / temperature, in the narrow column
+  format of the Tuner Genius widget. With several amplifiers configured, a
+  dropdown on the icon picks which one it shows — or **All**.
+
+### Band-follow (amp on a second COM port)
+
+An ACOM or SPE that normally polls the radio for its frequency can follow
+OpsLog instead: OpsLog answers the amp's polls **as a Kenwood rig** on a second
+COM port (Settings → Amplifier → frequency port). Useful when the real radio's
+CAT port is already taken by OpsLog itself.
+
+## Tuner Genius XL (4O3A)
+
+Settings → Tuner Genius (IP only; port fixed at 9010). Live **SWR and forward
+power** with peak-hold, **Tune / Bypass / Operate-Standby**, and the two
+channels A/B (source, frequency, antenna) shown and click-selectable. Available
+as a docked widget, a card in the FlexRadio panel and a card in Station
+Control. Direct TCP — uses one of the box's connection slots.
 
 ## Antenna Genius (4O3A) antenna switch
 
@@ -16,8 +50,29 @@ Over TCP / GSCP — a docked **A/B antenna-switch** widget:
 - One row per configured antenna, with a **Port A** and **Port B** button.
 - Colours: green = selected on port A, blue = selected on port B, red (pulsing) =
   that port is transmitting. Clicking a selected port deselects it (→ None).
-- **Band filter** (funnel icon in the header): shows only the antennas configured
+- **Band filter** (funnel icon): shows only the antennas configured for the
-  for the current band, like the native app. Toggle it off to see all antennas.
+  current band. Antennas with an unknown band mask are always shown.
-  Antennas with an unknown band mask are always shown.
 
 Configure the host / password in Settings → Antenna Genius.
+
+## Relay boards (Station Control)
+
+Relay boards for antenna/accessory switching, with named buttons in Station
+Control:
+
+- **WebSwitch 1216H** (5 relays, LAN) and **KMTronic** 8-relay WEB (LAN, with
+  optional HTTP authentication).
+- **Dingtian IOT relay** (2 to 32 relays, LAN or WiFi), driven over its HTTP
+  CGI. Give its IP address and pick the relay count; the **relay password** and
+  **session ID** fields are only needed if you enabled them on the board's own
+  web page — a factory board needs neither.
+- **Denkovi** USB (4/8 relays, FT245) and generic **CH340 / LCUS** USB-serial
+  boards.
+
+A Test-connection button and detection feedback live in the setup panel.
+
+## Station Control
+
+The Station Control tab is a dashboard of fixed-width panels that wrap to fill
+the window — amplifier(s), tuner, relays, rotator, Ultrabeam… Drag a panel by
+the grip on its left edge to reorder; the order is remembered.

wiki/Audio-and-Keyers.md

@@ -2,35 +2,72 @@
 
 ## CW keyer
 
-A CW keyer with **macros** and F-key macros. The keyer **engine** is selectable
+A CW keyer with **macros** on F-keys (F1–F9; empty slots are hidden). The keyer
-(Settings → CW Keyer):
+**engine** is selectable (Settings → CW Keyer):
 
-- **WinKeyer** — K1EL WK1/2/3 over a COM port.
+- **WinKeyer** — K1EL WK1/2/3 over a COM port. The log names the generation
+  detected, and a byte-level trace can be enabled for bug reports.
+- **Serial port (DTR=CW / RTS=PTT)** — OpsLog keys CW by toggling a serial
+  control line itself, the hardware method N1MM/WSJT-X use with a Yaesu SCU-17
+  or a generic keying interface. No WinKeyer needed. Choose the COM port, which
+  line carries CW, and *Invert keying* for interfaces that key backwards. This
+  is also the engine for an **FTDX10** (whose CAT refuses `KY`), on the rig's
+  second COM port.
 - **Icom** — the radio's own keyer over CI-V, no extra hardware. Works over the
-  remote link too. (Requires the Icom CAT backend; set break-in to SEMI/FULL or
+  remote link too. (Set break-in to SEMI/FULL or the rig keys the sidetone but
-  the rig keys the sidetone but stays in RX.)
+  stays in RX.)
+- **FlexRadio (CWX)** — keys CW straight over the SmartSDR connection, with
+  type-ahead and mid-send backspace.
+- **Yaesu (rig keyer)** — the radio's internal keyer over CAT (`KY`), for the
+  FTDX101 / FT-991A / FT-710 family. See [[Yaesu]].
 - **TCI** — for TCI backends.
 
+**ESC** stops CW on whichever engine is active; typing a callsign aborts a
+running macro. `<LOGQSO>` inside a macro logs the contact at that exact point.
+**Auto-call** repeats a CQ with the gap you set measured *after* the message.
+
+### ESM — Enter Sends Message
+
+N1MM-style, for CW (Settings → CW Keyer). With the keyer on, **Enter** fires a
+macro by QSO stage instead of logging: empty callsign → F1 (CQ); callsign
+entered → F2 (report), focus jumps to RST; Enter in RST → F3 (TU), which logs
+if the macro contains `<LOGQSO>`.
+
 ## Digital Voice Keyer (DVK)
 
 Record **F1–F6** voice messages and transmit them. Set the audio devices, PTT
 method and gains in Settings → Audio.
 
-- **PTT** method: CAT, RTS, DTR, or none (VOX).
+- **PTT** method: CAT (whichever backend is active — every one supports PTT),
-- **Test PTT** keys the rig briefly. On CAT/OmniRig the key is held ~1.5 s so the
+  RTS, DTR, or none (VOX).
-  transmit command is actually sent (OmniRig is asynchronous and coalesces rapid
+- **Auto CQ** repeats a CQ-labelled message on a timer until you stop it.
-  writes).
+- The DVK refuses to transmit on non-phone modes — no speech on FT8.
+- A **message level** control (Settings → Audio) drives the rig at the right
+  level even from a quietly recorded microphone. If the rig transmits almost
+  nothing, check its rear-input setting (on an FTDX10: SSB MOD SOURCE = REAR).
 
 ## QSO audio recording
 
-Continuous rolling capture. On **Log QSO** the contact is saved to a per-QSO WAV
+Continuous rolling capture. On **Log QSO** the contact is saved to a per-QSO
-(`CALL_YYYYMMDD_HHMMSS.wav`), mixing RX + mic. Configure the recordings folder,
+WAV/MP3 (`CALL_YYYYMMDD_HHMMSS`), with pre-roll. With automatic recording off, a
-format (WAV / MP3), pre-roll and gains in Settings → Audio.
+**red dot** beside the callsign records the contact by hand.
+
+A recording can be **replayed on the air** to the station being worked, like a
+voice-keyer message — with its **own level**, separate from the voice keyer (a
+receiver line-out needs far less gain than a microphone). The play button
+becomes a **stop** button while it transmits. Hidden on CW.
+
+## CW decoder (RX audio → text)
+
+**Tools → CW decoder** (or the ear button) decodes received CW while the mode
+is CW: adaptive envelope with noise squelch, per-character dit/dah
+classification, follows 12–40 WPM and sloppy fists, rides QSB. Shows WPM /
+pitch / level, locks onto the FlexRadio CW pitch automatically, and clicking a
+decoded word fills the callsign. Clean-to-moderate signals decode solidly;
+weak-signal pileups remain CW Skimmer territory.
 
 ## RX audio monitor (USB rigs)
 
 Settings → Audio → **Listen to radio** pipes the rig's received audio (its "USB
-Audio CODEC" input) through your speakers, so you hear the radio inside OpsLog.
+Audio CODEC" input) through your speakers — the level applies live as you drag
-**Talk to radio** keys PTT and pipes your mic to the rig's audio input. (Network
+it. **Talk to radio** keys PTT and pipes your mic to the rig's audio input.
-audio for remote Icom is a work in progress — see
-[[Remote Icom over the Internet]].)

wiki/Awards.md

@@ -6,8 +6,15 @@ shared **globally** across profiles.
 ## Built-in awards
 
 DXCC, WAS / WAZ / WAC, WPX, IOTA / POTA / SOTA / WWFF, **DDFM** (French
-departments), and more — tracked **worked / confirmed / validated** by band and
+departments), **DLD** (DARC DOK), **H26** (Helvetia 26 cantons), the US
-mode.
+counties (USA-CA), and more — tracked **worked / confirmed / validated** by
+band and mode.
+
+The awards panel has a **mode filter** (All / CW / Phone / Digital) that
+applies to the whole award — bands, counts, confirmations and the contacts
+behind a cell — and stacks with the worked/confirmed filter, so "worked on CW
+but not confirmed on CW" is one click. Reference lists sort by reference or by
+description.
 
 ## How matching works
 
@@ -121,13 +128,20 @@ drop off the list. This is how you close the gaps a matcher can't fill on its ow
 
 ## Live detection & manual refs
 
-- References are detected **live** as you enter a callsign.
+- References are detected **live** as you enter a callsign — from the looked-up
+  address *and* from the QTH, name, country, comment, note or grid you typed.
+- An award can be marked **one reference per QSO** (used by DLD). When several
+  references then match the same contact, none is assigned silently — the
+  candidates are offered at log time and you pick. Off by default, so an n-fer
+  POTA activation still counts every park.
 - You can **manually assign** a reference to a QSO (the *Award Refs* tab of the
   QSO editor). It's stored in an ADIF extra (`APP_OPSLOG_AWARDREFS`) so it
   survives export/import — see [[Import and Export ADIF]] — and is honoured
   everywhere (award panel, grid columns, totals). For a list-backed award the
   assigned reference must still be a **valid, listed** reference, and the QSO
-  must be **in scope** (rule 5) for it to count.
+  must be **in scope** (rule 5) for it to count. A hand-assigned reference
+  **replaces** what the matcher found, so a correction survives the next
+  recompute.
 
 ## Reference lists & display
 

wiki/CAT-Control.md

@@ -1,28 +1,46 @@
 # CAT Control
 
-OpsLog has **four native CAT backends** (Settings → CAT). Each auto-reconnects
+OpsLog has **eight CAT backends** (Settings → CAT). Each auto-reconnects and
-and connects *non-blocking*, so a powered-off radio never freezes the app.
+connects *non-blocking*, so a powered-off radio never freezes the app. Backends
+are named by **how the radio is reached**:
 
 | Backend | Use it for |
 |---------|-----------|
 | **OmniRig** | Any OmniRig-supported rig (Rig 1 / Rig 2, hot-swap). |
-| **FlexRadio (SmartSDR)** | FlexRadio 6000/8000 over the TCP API. → [[FlexRadio]] |
+| **FlexRadio (API)** | FlexRadio 6000/8000 over the TCP API. → [[FlexRadio]] |
-| **Icom CI-V** | Any Icom over **USB** *or* over the internet via its **LAN server**. → [[Icom]] · [[Remote Icom over the Internet]] |
+| **Yaesu (USB)** | FTDX10 / FTDX101 family, direct serial — no OmniRig. → [[Yaesu]] |
+| **Kenwood (USB, network)** | TS-590 / TS-890 / TS-990 / TS-2000 (Elecraft K3/K4 speak the same dialect), serial or a `host:port` serial bridge. → [[Kenwood and Xiegu]] |
+| **Xiegu (USB)** | G90 / X6100 / X6200 / X5105 — CI-V with their reduced command set. → [[Kenwood and Xiegu]] |
+| **Icom (CI-V USB)** | Any Icom over USB. → [[Icom]] |
+| **Icom (CI-V network)** | An Icom's built-in LAN/internet server, replacing RS-BA1. → [[Remote Icom over the Internet]] |
 | **TCI** | SunSDR / ExpertSDR2 and any TCI (WebSocket) server. |
 
-Once connected, frequency / band / mode follow the radio, clicking a cluster spot
+Once connected, frequency / band / mode follow the radio, clicking a cluster
-tunes the rig, and (for Flex) cluster spots can be pushed to the panadapter.
+spot tunes the rig, and (for Flex) cluster spots can be pushed to the panadapter.
+
+## Sharing the rig with WSJT-X / JTDX / MSHV (rigctld)
+
+A native backend holds the radio's serial port **exclusively** — so OpsLog can
+serve its rig connection to other programs instead: **Settings → CAT → Share
+CAT**. In WSJT-X / JTDX / MSHV / Log4OM pick rig model **Hamlib NET rigctl** at
+`127.0.0.1:4532`. Works with every backend and both Hamlib command dialects.
+
+> Never point two programs at the same COM port. If another logger or WSJT-X
+> opens the rig's port directly while OpsLog holds it, you get "port busy"
+> errors, garbled CI-V frames and erratic rig behaviour. One master — OpsLog —
+> and everyone else through the shared rigctl port.
 
 ## OmniRig
 
 Pick **Rig 1** or **Rig 2** (the two OmniRig slots). Configure the actual COM
-port / baud in OmniRig's own settings. Works with anything OmniRig supports; PTT
+port / baud in OmniRig's own settings.
-keying via CAT is supported where the rig's OmniRig profile exposes it.
 
-## FlexRadio
+- **VFO to read** — some OmniRig rig files declare the wrong active VFO (an
-
+  IC-7610 file declared VFO B). If the frequency looks frozen or follows the
-Enter the radio's IP (UDP discovery assists). You get a full SmartSDR-style
+  wrong VFO, force **A** or **B** here.
-control tab — see **[[FlexRadio]]**.
+- OpsLog and OmniRig must run at the **same privilege level** — one elevated
+  ("as administrator") and not the other cannot see each other; OpsLog detects
+  and names this case.
 
 ## Icom CI-V (USB)
 
@@ -31,7 +49,7 @@ control tab — see **[[FlexRadio]]**.
 - **COM port** + **baud** must match the radio (set *CI-V USB Echo Back* **OFF**
   on the rig).
 - The model choice also tailors the console (e.g. attenuator steps: 20 dB on an
-  IC-7300, 6/12/18 dB on an IC-7610).
+  IC-7300, 6/12/18 dB on an IC-7610/7800).
 
 Full console details: **[[Icom]]**.
 
@@ -40,10 +58,30 @@ Full console details: **[[Icom]]**.
 Enter the TCI host + port (default 40001). Gives freq / mode / PTT / split and,
 optionally, panorama spots.
 
+## Serial lines (DTR / RTS)
+
+Windows raises the DTR and RTS lines when a serial port opens, and some
+interfaces read one of them as **PTT** — the radio goes into transmit the moment
+OpsLog connects. Others need the lines **high** to work at all. So:
+
+- **Xiegu** always lowers both on connect (a G90 behind a DE-19 keyed on open),
+  and has a setting for which line keys the rig.
+- **Yaesu and Kenwood** have an option (off by default) to lower both lines on
+  connect — turn it on only if your interface transmits as soon as OpsLog opens
+  the port.
+- **Icom CI-V** has always dropped them.
+
+## Protocol trace
+
+Settings → CAT can log the **raw protocol** (every CI-V frame, or every Kenwood
+command, as hex/text) to the diagnostic log — invaluable when reporting a radio
+that answers oddly. The checkbox shows whether the trace is really running.
+
 ## Notes
 
 - The **digital sub-mode** (FT4 vs FT8) is inferred from the frequency.
+- A radio reporting LSB or USB selects **SSB** in the entry form.
 - **Per-band Flex RX/TX antennas** can be configured and are applied
-  automatically on band change (Settings → FlexRadio).
+  automatically on band change (Settings → CAT → FlexRadio).
 - Split, RIT/XIT and other rig-specific features are exposed on each backend's
   control tab where supported.

wiki/DX-Cluster-and-Spots.md

@@ -3,27 +3,39 @@
 ## Servers
 
 Add multiple cluster servers (Settings). They auto-reconnect; one is the
-**master** used for sending commands. The Cluster tab and the Main-view cluster
+**master** used for sending commands. A quiet node is not treated as a dead one
-pane share the same live feed.
+— silence keeps its session, login and filters. The Cluster tab and the
+Main-view cluster pane share the same live feed.
 
 ## Filter sidebar
 
 A show/hide **filter sidebar** (shared by the Cluster tab and the Main pane):
 
 - **Callsign** search, **hide worked**, **group duplicates**.
-- Filter by **band / mode / status / source**.
+- Filter by **band / mode / status / source**, plus **NEW POTA** and
+  **NEW COUNTY** chips.
 
 ## Per-spot status and tuning
 
 Each spot is coloured by **status** relative to your log:
 
-- **new** (entity never worked), **new-band**, **new-slot**, **worked**.
+- **new** (entity never worked), **new-band**, **new-mode**, **new-slot**,
+  **worked**.
+- Settings → General → **Group digital modes as one (DXCC-style)** makes
+  FT8/FT4/RTTY/PSK count as a single Digital mode for the colouring and the
+  matrix badges, matching how DXCC counts.
 
 Click a spot to **tune the rig** (fills the callsign into the entry strip). A
-multi-band **Band Map** shows panadapter-style strips per band.
+multi-band **Band Map** shows panadapter-style strips per band — its CW / data
+/ phone sub-bands use their own colour-blind-checked hues, and **Ctrl+↑ /
+Ctrl+↓** jumps to the next spot above/below the current frequency and tunes it.
 
 **POTA** spots are tagged with their park reference (via `api.pota.app`).
 
+The entry strip's band matrix can also show the **ClubLog Most Wanted rank**
+(Settings → General): an `MW #rank` pill next to the entity name, personalised
+to your callsign, refreshed daily.
+
 ## Sending a spot
 
 Use the **Send Spot** window to announce a DX spot on the master cluster:
@@ -35,6 +47,12 @@ frequency** (full resolution, including sub-kHz).
 **Tools → Alert management** — Log4OM-style alert rules on **call / country /
 band / mode / spotter**, with **sound**, **visual** and **e-mail** notification.
 Active alerts appear as a discreet bell in the entry strip; click it for the
-list. Alerts are kept briefly and only shown when active.
+list.
+
+## External spot sources
+
+A **DXHunter** remote-call UDP packet fills the callsign, and when it carries
+`<FREQ>` and `<MODE>` it also tunes whichever CAT backend is active. See
+[[Settings and Data]] for the UDP configuration.
 
 See also: [[Maps and Antennas]] for turning the beam to a spot.

wiki/Home.md

@@ -1,10 +1,11 @@
 # OpsLog
 
 A modern, fast ham-radio logger for **Windows** — Log4OM-style entry, real-time
-CAT for **OmniRig**, native **FlexRadio/SmartSDR**, native **Icom CI-V** (USB
+CAT for **OmniRig**, native **FlexRadio/SmartSDR**, **Icom CI-V** (USB *and*
-*and* remote-over-internet, replacing RS-BA1) and **TCI** (SunSDR / Expert
+remote-over-internet, replacing RS-BA1), **Yaesu**, **Kenwood**, **Xiegu** and
-Electronics), a DX cluster with spot alerts, awards tracking, maps, contest
+**TCI** (SunSDR / Expert Electronics) — with **CAT sharing** so WSJT-X & co use
-logging, QSL management and a QSL-card designer.
+the same rig link — a DX cluster with spot alerts, awards tracking, maps,
+contest logging, QSL management and a QSL-card designer.
 
 Built with **Wails v2** (Go backend + React/TypeScript frontend), **pure Go**
 (no CGO). SQLite holds the configuration; the logbook can be the local SQLite
@@ -18,14 +19,15 @@ Developed by **F4BPO**.
 1. **[[Installation]]** — download / build and first launch.
 2. **[[Getting Started]]** — the entry strip, logging your first QSO, choosing a
    profile.
-3. **[[CAT Control]]** — connect your radio (OmniRig, FlexRadio, Icom, TCI).
+3. **[[CAT Control]]** — connect your radio (OmniRig, FlexRadio, Icom, Yaesu,
+   Kenwood, Xiegu, TCI).
 
 ## What OpsLog does
 
 | Area | Pages |
 |------|-------|
 | Enter and manage QSOs | [[Logging Basics]] · [[Recent QSOs and Filters]] · [[Import and Export ADIF]] |
-| Control your radio | [[CAT Control]] · [[FlexRadio]] · [[Icom]] · [[Remote Icom over the Internet]] |
+| Control your radio | [[CAT Control]] · [[FlexRadio]] · [[Icom]] · [[Remote Icom over the Internet]] · [[Yaesu]] · [[Kenwood and Xiegu]] |
 | Chase DX | [[DX Cluster and Spots]] · [[Maps and Antennas]] |
 | Station hardware | [[Amplifiers and Switches]] · [[Audio and Keyers]] |
 | Events & contests | [[Contest Logging]] · [[Net Control]] · [[Multi-Operator Live Status]] |

wiki/Import-and-Export-ADIF.md

@@ -8,22 +8,34 @@ export modes.
 
 Import an `.adi` / `.adif` file into the active profile's logbook. On import,
 OpsLog parses every field, maps standard fields to columns and keeps unknown but
-valid ADIF fields in a per-QSO **extras** store (editable later). Country / zones
+valid ADIF fields in a per-QSO **extras** store (editable later). Country /
-are enriched from `cty.dat` where missing.
+zones are enriched from `cty.dat` where missing. A file **without a header**
+(records pasted from another log) imports fine.
+
+- **Field remapping**: the import dialog can move a field as it reads it —
+  e.g. the RSGB IOTA contest exports the island reference in `STATE`; add a
+  `STATE → IOTA` row and it lands where the award looks.
+- **Fill from profile**: optionally stamps your station fields *and* your
+  default confirmation statuses (paper QSL, LoTW, eQSL, Club Log, HRDLog,
+  QRZ.com) on QSOs the file leaves empty — a WSJT-X log carries almost none.
+  Existing values are never overwritten.
 
 ## Export
 
 - **Whole log**, **selected rows**, or the **filtered view** (no limit) — see
   [[Recent QSOs and Filters]].
-- **Standard** mode exports the common promoted fields; **All** mode also exports
+- **Standard** mode exports the common promoted fields; **All** mode also
-  every extra field.
+  exports every extra field; **Choose fields…** opens a picker that separates
+  the official ADIF 3.1.7 fields (by category) from the OpsLog / non-standard
+  tags actually present in your log, with All/None per group. Your selection is
+  remembered.
 - **Cabrillo** export for contest submission.
 
 ## Round-trip safety
 
 Award references you assign manually are stored in an ADIF extra field
-(`APP_OPSLOG_AWARDREFS`), so exporting your full log and re-importing it does not
+(`APP_OPSLOG_AWARDREFS`), so exporting your full log and re-importing it does
-lose your award-reference assignments.
+not lose your award-reference assignments.
 
 ## Tips
 

wiki/Kenwood-and-Xiegu.md

@@ -0,0 +1,49 @@
+# Kenwood and Xiegu (native CAT)
+
+## Kenwood (USB, network)
+
+A native backend talks straight to a **TS-590 / TS-890 / TS-990 / TS-2000**
+over its serial port — frequency, mode, VFO, split and PTT, no OmniRig in
+between. **Elecraft K3/K4** speak the same dialect. Pick **Kenwood (USB,
+network)** in Settings → CAT.
+
+- **Serial**: COM port + baud.
+- **Network**: give a `host:port` instead — for a serial bridge (ser2net, an
+  Ethernet-serial adapter). *Not* the radio's own RJ45, which speaks Kenwood's
+  KNS/ARCP protocol.
+- Split is detected from FR/FT when the radio omits it from its status frame.
+- The backend was tested end-to-end against a TS-2000 emulator and reports
+  useful errors: a port that opens but stays silent is distinguished from one
+  sending data that never answers (the error quotes what arrived).
+
+## Xiegu (G90, X6100, X6200, X5105)
+
+These radios speak CI-V but with a **reduced command set** (no scope, no DSP
+block, no data mode), so they have their own backend — pick **Xiegu (USB)** in
+Settings → CAT. Frequency, mode, split and PTT.
+
+### PTT on a G90 — read this
+
+A **G90 ignores the CI-V PTT command**. That has three consequences:
+
+1. In the Xiegu settings, choose **how the rig is keyed**: CI-V command, RTS or
+   DTR — pick the hardware line your interface wires to PTT.
+2. WSJT-X & co transmit through OpsLog's **shared CAT link** (Hamlib NET rigctl
+   `127.0.0.1:4532` — see [[CAT Control]]): OpsLog converts the PTT request
+   into the hardware line. This is the supported path and it works.
+3. **WSJT-X + OmniRig will NOT transmit** a G90: OmniRig sends PTT as a CI-V
+   command, which the radio ignores. Either use the native Xiegu backend +
+   rigctl sharing, or configure the PTT line (RTS/DTR) inside OmniRig itself.
+
+### Keying on connect
+
+Behind an interface that carries PTT on a modem line (e.g. a DE-19), a G90 used
+to go **straight into transmit when OpsLog connected** — Windows raises DTR and
+RTS when a serial port opens. The Xiegu backend now drops both lines on
+connect, then drives only the line you selected for keying.
+
+## Notes
+
+- Both backends refuse a CI-V/CAT frame read at the wrong offset, so a garbled
+  answer can no longer turn into a phantom frequency.
+- The protocol trace (Settings → CAT) covers both — see [[CAT Control]].

wiki/Logging-Basics.md

@@ -10,8 +10,24 @@ save. Fields: callsign, RST tx/rx, name, QTH, grid, band, mode, TX/RX frequency
   CQ/ITU zones, continent) from `cty.dat` including `/MM` `/AM` `/B` and call-area
   handling (`/8`, `/W6`), plus **ClubLog** DXpedition date overrides.
 - **Callsign lookup** (QRZ.com / HamQTH) fills name / QTH / grid and shows the
-  photo and a QRZ.com tab. Configure it in Settings → Lookup.
+  photo and a QRZ.com tab. Configure it in Settings → Lookup. Portable calls
+  (`/M`, `/P`) are looked up on the home call too.
+- **No lookup account?** The name / QTH / locator are recovered from the **last
+  time you worked the station**, and for US calls the offline **FCC (ULS)**
+  database fills state, county and a 6-character grid as you type. A real
+  QRZ/HamQTH hit still wins.
+- A green **NEW** badge appears on the County field (Info / F2) when the US
+  county has never been worked.
 - **ESC** clears the callsign (and stops CW).
+- The frequency readout is **scroll-tunable**: roll the wheel over the
+  hundreds / tens / units-of-kHz digit and the rig follows.
+
+## Super Check Partial / N+1
+
+Enable in Settings → General (downloads the community MASTER.SCP list). As you
+type a call, a docked two-column widget shows known calls that **contain** what
+you typed (Partial) and calls **one character away** (N+1) — click one to fix a
+busted call.
 
 ## Editing a QSO
 
@@ -22,14 +38,18 @@ fields** editor for any ADIF field not promoted to a column.
 
 ## Bulk operations
 
-Select rows in Recent QSOs, right-click:
+Select rows in Recent QSOs (a **Select all** button takes every displayed row),
+right-click:
 
-- **Fix country & zones** from `cty.dat`, or **update from QRZ / ClubLog**.
+- **Fix country & zones** from `cty.dat`, or **update from the callsign
-- **Bulk edit field** — set one field across many QSOs (QSL/upload status, my
+  databases** (QRZ / ClubLog), with a progress bar.
-  station, contest, propagation, contacted-station refs, comment…). Great for
+- **Bulk edit field** — set one field across many QSOs: QSL/confirmation
-  flipping a batch to *Requested* before an upload.
+  statuses *and dates*, my station, contest, propagation, contacted-station
+  refs, comment, **gridsquare**, even the **frequency** (band recomputed,
+  out-of-band values refused).
 - **Send to** a QSL service, **export** selected / filtered to ADIF or Cabrillo,
-  **delete**.
+  **delete** (optionally withdrawing the QSO from QRZ.com and Club Log —
+  Settings → External services, off by default).
 
 ## Find duplicates
 
@@ -40,6 +60,9 @@ same day or same minute) and lets you pick which to delete.
 
 - **Worked-before matrix** shows prior contacts with the entity per band/mode
   slot as you type.
-- Awards references are detected **live** as you enter a call (see [[Awards]]).
+- Award references are detected **live** as you enter a call — including from
+  the QTH, name, comment or grid you typed (see [[Awards]]).
+- The callsign in the top bar is the **station switcher**: click it to change
+  profile.
 
 See also: [[Recent QSOs and Filters]] · [[Import and Export ADIF]]

wiki/Maps-and-Antennas.md

@@ -3,36 +3,48 @@
 ## Main view
 
 The Main view is **two configurable panes** (per profile, Settings → General →
-*Main view*). Choose from: great-circle map, locator (street) map, the cluster
+*Main view*), with a **draggable divider** between them (double-click it to
-grid, the worked-before grid, recent QSOs, the **FlexRadio** controls, the
+even them out). Choose from: great-circle map, locator (street) map, the
-**Icom** console, or the **Net control** panel.
+cluster grid, the worked-before grid, recent QSOs, the **FlexRadio** controls,
+the **Icom** or **Yaesu** console, or the **Net control** panel.
 
 ## Great-circle map
 
 - Short/long-path **distance & azimuth** to the worked station.
-- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite (all
+- Selectable, **key-free** basemaps: Light / Voyager / Street / Satellite.
-  labelled).
 - The **antenna beam lobe(s)** are drawn from the rotor azimuth.
+- **Day/night terminator** and twilight band (button at the top right).
 
 ## Locator (street) map
 
 An OSM street map centred on the contacted grid square — handy for local /
 portable contacts. No API key.
 
-## Rotor compass
+## Rotators
 
-An azimuthal-equidistant **click-to-turn** compass driven by **PstRotator**. The
+An azimuthal-equidistant **click-to-turn** compass; the current heading and
-current heading and target are shown; click a bearing to turn the rotor.
+target are shown. Three rotator types (Settings → Rotator):
 
-## Ultrabeam
+- **PstRotator** — via its UDP interface.
+- **microHAM ARCO** — native, over LAN or USB: set the ARCO's CONTROL PROTOCOL
+  to *Yaesu GS-232A*.
+- **GS-232A (generic)** — any GS-232A controller, ERC (Easy Rotor Control)
+  included; serial speed selectable. Set an ERC to GS-232 emulation, not
+  Hy-Gain DCU-1.
 
-Ultrabeam antennas are supported with three modes — **Normal**, **180° reverse**,
+## Motorized antennas (Ultrabeam / SteppIR)
+
+Both follow the **rig frequency** (band change → retune) and retune immediately
+when you click a spot, with three modes — **Normal**, **180° reverse**,
 **Bidirectional**:
 
 - The **radiating direction** is shown in green and the **mechanical boom** in
-  grey, on both the compass and the map, so you always know where the antenna
+  grey, on both the compass and the map.
-  actually points.
+- On a FlexRadio, transmit is **inhibited while the elements move**, and
-- The antenna **follows the rig frequency** (band change → retune), and retunes
+  released as soon as the antenna is tuned.
-  immediately when you click a spot.
+- **SteppIR — Tunable range** (Settings → Hardware → Antenna, default
+  13–54 MHz): outside it OpsLog leaves the antenna and the TX interlock
+  completely alone, so tuning to 30 m on a 20 m–6 m SteppIR does nothing.
 
-Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch).
+Related hardware: [[Amplifiers and Switches]] (Antenna Genius switch, Tuner
+Genius, relays).

wiki/Profiles-and-Databases.md

@@ -6,18 +6,29 @@ Every setting in OpsLog is **per-profile**: station identity, CAT, lookup, QSL
 defaults, awards display, antennas, and which logbook to use. Create one profile
 per callsign / station / event.
 
-Switch or manage profiles in Settings. The active profile decides which logbook
+The **callsign in the top bar is the station switcher** — click it and pick a
-your QSOs go to.
+profile. Managing profiles is at the bottom of that list (and in Settings).
 
-## Config vs. logbook — two different stores
+## Two separate databases
+
+Since 0.21.0 the settings and the QSOs live in **separate files**:
 
 | Store | What | Where |
 |-------|------|-------|
-| **Config** | settings, profiles, rigs/antennas, cluster nodes, lookup cache, award lists, QSL templates | always the **local SQLite** file under `data/` |
+| **Settings database** (`settings.db`, or `opslog.db` on older installs) | settings, profiles, rigs/antennas, cluster nodes, lookup cache, award lists, QSL templates | always the **local SQLite** file under `data/` |
-| **Logbook** | your QSOs | where the active profile points — local SQLite **or** shared MySQL |
+| **Logbook** (`logbook.db`) | your QSOs | where the active profile points — a local SQLite file **or** shared MySQL |
 
-Keeping config local means the UI is instant even when the logbook is a far-away
+Keeping the settings local means the UI is instant even when the logbook is a
-MySQL server.
+far-away MySQL server. Settings → Database shows the two as separate sections,
+with an *Open folder* shortcut; a logbook file can be **renamed or relocated**
+(its QSOs move with it), and the status bar names the **logbook** file — that
+is the one to back up.
+
+A profile can point at its **own logbook file** — ideal for a visiting
+operator, whose contacts stay out of your log without touching your settings.
+
+**Portable**: paths inside the OpsLog folder are stored relative to it, so
+moving the whole folder to another drive or PC loses nothing.
 
 ## Shared MySQL logbook (multi-operator)
 
@@ -25,11 +36,18 @@ Point a profile's logbook at a **MySQL** database so several operators run **one
 log** — e.g. a multi-op special-event call. Configure the host / database /
 credentials in the profile's database settings.
 
-This is also what powers [[Multi-Operator Live Status]] (each instance heartbeats
+- The database and tables are converted to **utf8mb4** on connect, so Cyrillic
-its activity into a `live_status` table).
+  or Polish characters from a QRZ lookup store correctly even when the hosting
+  panel created the database as latin1.
+- An FT8/MSHV QSO that cannot reach a laggy shared database is **parked and
+  re-logged automatically** once it recovers — no lost QSOs.
+- Switching to a profile whose MySQL is unreachable shows a clear warning
+  instead of silently staying on the previous logbook.
+
+This is also what powers [[Multi-Operator Live Status]].
 
 ## Backups
 
 Optional **database + ADIF backup at shutdown** (Settings → Backup). Regardless,
-copying the `data/` folder backs up your config and local logbook. See
+copying the `data/` folder backs up your settings and local logbook. See
 [[Settings and Data]].

wiki/Recent-QSOs-and-Filters.md

@@ -4,13 +4,23 @@
 
 The main log table. Double-click a row to edit; right-click for bulk actions
 (see [[Logging Basics]]). Columns are configurable — click **Columns** to choose
-which are visible; your selection is saved (per profile).
+which are visible; widths, order and hidden columns are saved (per profile),
+with a separate layout for the narrower Main-tab pane.
+
+- The selected-row count is always visible at the top, and a **Select all /
+  Unselect all** button takes every displayed row.
+- QSL and upload status columns are coloured: **Y** green, **N** red, **R**
+  blue.
+- A **Distance (km)** column (also in Worked-before) is computed from the QSO's
+  own locator pair.
+- There are **no per-column header filters** — they only ever searched the rows
+  on screen, which made a QSO further back in the log look missing. Use the
+  advanced filter, which queries the whole logbook.
 
 ### Award columns
 
-Each defined award can show a column with the reference the QSO counts for. These
+Each defined award can show a column with the reference the QSO counts for.
-columns are **hidden by default** and opt-in from the Columns picker — turn on
+These columns are **hidden by default** and opt-in from the Columns picker.
-only the awards you're chasing. Your choice persists across restarts.
 
 ## Advanced filter builder
 
@@ -19,15 +29,19 @@ Click the filter button to open the **QSO filter builder** (Log4OM-style):
 - Add one or more **conditions**: *field · operator · value*.
 - Operators: equals, not-equal, contains, starts/ends with, greater/less
   (or equal), is empty, is not empty.
+- Fields include every confirmation **status and date** (sent / received,
+  before / after) for paper QSL, LoTW, eQSL, Club Log, HRDLog and QRZ.com.
+  Field names stay in English — they are ADIF names, a standard vocabulary.
 - Join conditions with **ALL (AND)** or **ANY (OR)**.
 - Save named **presets** (they travel with the `data/` folder).
-- The field dropdown is sorted alphabetically to find things fast.
 
-The filtered view can be exported: **selected rows** or the **whole filtered
+A filter shows **every** match (the on-screen row limit only applies to the
-view** (no row limit) → ADIF or Cabrillo.
+unfiltered log; safety cap 10 000). The filtered view can be exported:
+**selected rows** or the **whole filtered view** → ADIF or Cabrillo.
 
 ## Worked-before matrix
 
 As you type a callsign, the worked-before grid shows prior contacts with that
 **entity**, arranged by band/mode slot, so you instantly see what's new (new
-DXCC / new band / new slot) versus already worked.
+DXCC / new band / new slot) versus already worked. Its right-click menu offers
+the same bulk edit and export as the main grid.

wiki/Settings-and-Data.md

@@ -4,48 +4,58 @@
 
 A `data/` folder is created **next to `OpsLog.exe`**:
 
-- **Config** (SQLite): settings, profiles, rigs/antennas, cluster nodes, lookup
+- **Settings database** (SQLite): settings, profiles, rigs/antennas, cluster
-  cache, award lists, QSL templates. Always local, so the UI is instant.
+  nodes, lookup cache, award lists, QSL templates. Always local.
-- **Local logbook** (SQLite): QSOs, when the profile logs locally.
+- **Logbook** (`logbook.db`, SQLite): QSOs, when the profile logs locally.
 - `data/qsl/templates/…` — QSL card templates and their photos.
 - `data/qsl/outbox/…` — sent QSL card JPEGs.
 - Recordings folder (configurable) — per-QSO WAV/MP3.
-- Backups.
+- Backups, diagnostic logs.
 
-Back up your setup by copying `data/` (and keep it with the exe). See
+Paths are stored **relative to the folder**, so the whole OpsLog directory can
+move to another drive or PC. Back up your setup by copying `data/`. See
 [[Profiles and Databases]] for local-vs-MySQL logbooks.
 
 ## Settings map
 
 | Section | What |
 |---------|------|
-| **General** | language, theme, Main-view panes, live-status publish |
+| **General** | language, theme, date format (US / FR / Standard), Main-view panes, digital-modes grouping, Super Check Partial, ClubLog exceptions & Most Wanted |
-| **Station** | your callsign, grid, name, address (my-station ADIF) |
+| **Station** | your callsign, grid, name, address (my-station ADIF) — hand-corrected CQ/ITU zones stay corrected |
-| **CAT** | radio backend + connection ([[CAT Control]]) |
+| **CAT** | radio backend + connection, CAT sharing (rigctld), protocol trace ([[CAT Control]]) |
 | **Lookup** | QRZ.com / HamQTH credentials |
-| **FlexRadio** | per-band RX/TX antennas |
+| **Audio** | DVK / recorder devices, PTT, gains and levels, RX monitor |
-| **Audio** | DVK / recorder devices, PTT, gains, RX monitor |
+| **CW Keyer** | engine (WinKeyer / Serial / Icom / Flex CWX / Yaesu / TCI), macros, ESM |
-| **CW Keyer** | WinKeyer / Icom / TCI engine + macros |
+| **External services** | LoTW (TQSL), QRZ, eQSL, ClubLog, HRDLog, POTA, Cloudlog/Wavelog |
-| **External services** | LoTW (TQSL), QRZ, eQSL, ClubLog, HRDLog, POTA |
+| **Email** | SMTP for eQSL-by-email and *Send log to F4BPO* |
-| **Email** | SMTP for eQSL-by-email |
+| **Amplifier / Tuner Genius / Antenna Genius / Rotator / Antenna** | station hardware ([[Amplifiers and Switches]] · [[Maps and Antennas]]) |
-| **PowerGenius / Antenna Genius / Rotator / Ultrabeam** | station hardware |
+| **Database** | settings DB + this profile's logbook, rename/relocate |
 | **Backup** | database + ADIF backup at shutdown |
 
 ## Appearance & language
 
 Four themes (Warm light, Warm dark, Graphite dark, High contrast) plus **Auto**
-(follows the OS). Full **English / French** UI with a first-run flag chooser and
+(follows the OS); fresh installs start dark. Full **English / French** UI with
-a switcher in Settings → General.
+a first-run flag chooser and a switcher in Settings → General. **Ctrl + wheel**
+zooms the whole UI (remembered; Ctrl+0 resets). The window title bar is drawn
+by OpsLog — drag the top bar to move, double-click to maximise — and the window
+reopens on the screen it was closed on.
 
-## Integrations (outbound UDP)
+## UDP integrations
 
-Push the current frequency to **PstRotator**, radio info in **N1MM `RadioInfo`**
+- **Inbound**: WSJT-X / MSHV / JTDX QSO logging and status (unicast or
-format, or an **ADIF record on each logged QSO** — so external tools stay in sync.
+  multicast), and DXHunter remote-call packets (fills the callsign, tunes the
+  rig when the packet carries `<FREQ>`/`<MODE>`).
+- **Outbound**: the current frequency to **PstRotator**, radio info in **N1MM
+  `RadioInfo`** format, or an **ADIF record on each logged QSO**.
 
 ## Other
 
-- **Autostart** external programs (WSJT-X, JTAlert, rotator control…) at launch,
+- **Autostart** external programs (WSJT-X, JTAlert, rotator control…) at
-  skipping any already running.
+  launch, skipping any already running.
-- **Update check** at startup (toggleable).
+- **Update check** at startup, when opening Help → About, and every 5 minutes.
+  A "What's new" summary appears on the first launch after each update.
+- **Help → Send log to F4BPO** (shown when SMTP is configured) e-mails the
+  diagnostic logs straight to the developer.
 - **Anonymous usage telemetry** — a once-a-day heartbeat (random install ID +
   version + OS; no callsign or QSO data). Opt out in Preferences.

wiki/Troubleshooting.md

@@ -2,57 +2,77 @@
 
 ## Where's the log file?
 
-OpsLog writes a diagnostic log. The path is shown in Settings (and can be opened
+OpsLog writes a diagnostic log. The path is shown in Settings (and can be
-from there). When reporting a problem, include the relevant lines — they're
+opened from there). When reporting a problem, include the relevant lines —
-prefixed by subsystem (`Flex:`, `icom net:`, `icom scope`, `antgenius:`,
+they're prefixed by subsystem (`cat:`, `Flex:`, `icom net:`, `antgenius:`,
-`cluster:`, `qslmgr:log`, `audio:`…).
+`cluster:`, `qslmgr:log`, `audio:`…). With an SMTP server configured, **Help →
+Send log to F4BPO** e-mails the logs straight to the developer.
+
+A crash no longer leaves a blank window: the error is shown on screen,
+selectable, with a copy button.
 
 ## CAT
 
 - **Radio not connecting** — check the backend fields (COM port + baud for USB;
-  IP/credentials for network). OpsLog connects non-blocking, so it won't freeze —
+  IP/credentials for network). The CAT log line carries the error explaining a
-  watch the CAT status.
+  disconnection.
-- **Icom: no CAT at all over USB** — the CI-V address must match the radio; pick
+- **"Serial port busy" in the log** — another program holds the COM port
-  your **model** from the dropdown (it sets the address) and set *CI-V USB Echo
+  (WSJT-X, MSHV, another logger configured for direct CAT). Only one program
-  Back* **OFF** on the rig.
+  can own the port: let OpsLog hold it and point the others at **Hamlib NET
-- **Icom scope blank on an IC-7300** — this was a bug where the scope decoder was
+  rigctl 127.0.0.1:4532** (Settings → CAT → Share CAT). Two masters on one
-  chosen from the configured CI-V address; it now uses the model detected from the
+  CI-V bus also cause garbled frames and erratic behaviour.
-  CI-V ID, so a single-scope rig run at address `0x98` decodes correctly. Update
+- **The radio transmits as soon as OpsLog connects** — your interface reads DTR
-  to the latest build.
+  or RTS as PTT. Xiegu drops the lines automatically; on Yaesu and Kenwood
-- **Icom attenuator button does nothing** — the dB steps are model-specific; make
+  enable the *lower DTR/RTS on connect* option. (It is off by default because
-  sure the right model is selected (IC-7300 = 20 dB, IC-7610 = 6/12/18 dB).
+  other interfaces stop transmitting with the lines low.)
+- **WSJT-X won't key a Xiegu G90 through OmniRig** — a G90 ignores the CI-V PTT
+  command. Use the native Xiegu backend (which keys RTS/DTR) + rigctl sharing,
+  or set the PTT line inside OmniRig. See [[Kenwood and Xiegu]].
+- **OmniRig frequency frozen / wrong VFO** — set **VFO to read** (A or B) in
+  the OmniRig backend settings; some rig files declare the wrong VFO.
+- **"OmniRig not found" with OmniRig running** — one of the two runs as
+  administrator and the other doesn't. Start both the same way.
+- **Icom: no CAT at all over USB** — the CI-V address must match the radio;
+  pick your **model** from the dropdown (it sets the address) and set *CI-V USB
+  Echo Back* **OFF** on the rig.
+- **A radio that answers oddly** — enable the **protocol trace** (Settings →
+  CAT): every frame to and from the rig lands in the log as hex, which turns a
+  guess into a diagnosis.
 
 ## Remote Icom
 
 - **Login rejected** → wrong Network User1 name/password.
 - **Can't bind local port** → the Icom **Remote Utility is still running** —
   close it.
-- **Link drops with the scope on** → receive-side retransmit should hold it; if
+- **Frequency frozen after another program took the CI-V session** — OpsLog
-  not, check network quality and the `icom net:` log lines. See
+  reconnects on its own; if it doesn't, check the `icom net:` log lines. See
   [[Remote Icom over the Internet]].
 
 ## FlexRadio
 
-- **A control reads 0 / stale at startup** — some SmartSDR status fields use short
+- **A control reads 0 / stale at startup** — some SmartSDR status fields use
-  names (e.g. the TX filter is reported as `lo`/`hi`, not `filter_low/high`). If a
+  short names. If a value never populates, capture the `Flex: … status` log
-  value never populates, capture the `Flex: … status` log line and report it.
+  line and report it.
-- **Antenna wrong band on a spot click** — fixed: `SetFrequency`/`SetMode` update
+- **SmartSDR CAT keeps disconnecting while OpsLog is open** — fixed: OpsLog now
-  the slice cache immediately so the panel and the Ultrabeam follow don't chase a
+  binds only to the actual SmartSDR/Maestro GUI client. Update.
-  stale frequency.
+- **"Interlock is preventing transmission" with a SteppIR** — see the tunable
+  range setting in [[Maps and Antennas]].
 
 ## Multi-op live status PHP
 
 `Connection refused` from the PHP page is almost always MySQL `bind-address =
-127.0.0.1` or a firewall/grant issue — see
+127.0.0.1` or a firewall/grant issue — see [[Multi-Operator Live Status]].
-[[Multi-Operator Live Status]].
 
 ## DVK / PTT
 
-- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the async
+- **Test PTT does nothing on CAT/OmniRig** — the key is held ~1.5 s so the
-  OmniRig write is actually sent; if it still doesn't key, the rig's OmniRig
+  async OmniRig write is actually sent; if it still doesn't key, the rig's
-  profile may not expose CAT TX keying — use RTS/DTR or VOX.
+  OmniRig profile may not expose CAT TX keying — use RTS/DTR or VOX.
+- **A voice message transmits almost nothing** — raise the message level
+  (Settings → Audio) and check the rig's rear-input setting (FTDX10: SSB MOD
+  SOURCE = REAR).
 
 ## Still stuck?
 
-Open an issue with: what you did, what happened, your radio/model, and the
+Open an issue (or *Send log to F4BPO*) with: what you did, what happened, your
-relevant log lines.
+radio/model, and the relevant log lines.

wiki/Yaesu.md

@@ -0,0 +1,47 @@
+# Yaesu (native CAT)
+
+A native backend talks to an **FTDX10 / FTDX101** (and close relatives) directly
+over the rig's USB/serial port — no OmniRig. Pick **Yaesu (USB)** in
+Settings → CAT: COM port + baud (FTDX10/101 default 38400).
+
+Frequency, mode, VFO A/B (MAIN/SUB on the 101), split and PTT are covered, and
+OpsLog **follows the VFO you are actually on** — the displayed frequency, the
+logged frequency and the VFO a cluster spot tunes. Split is worked out from
+which VFO transmits, so simplex on the SUB receiver is not shown as split.
+
+## The Yaesu console
+
+With the native backend connected, a console tab (and a Main-view pane) gives:
+
+- **S / PO / SWR meters** — power in watts on a curve measured against the rig's
+  own display, SWR as the ratio itself, with peak-hold so they stay readable
+  between CW words or SSB syllables.
+- **Band and mode buttons** — CW, RTTY, DIGI and PSK show their sideband; click
+  the active button again to switch it.
+- AF / RF / squelch, AGC, IPO–AMP1–AMP2, 6/12/18 dB attenuator, NB, DNR, narrow
+  filter, power, mic gain, VOX, split and **ATU tune**.
+- **SPLIT** places the transmit VFO up 1 kHz on CW/data, up 5 kHz on phone.
+- In CW the mic gain and VOX give way to a **CW card**: keyer speed, break-in
+  and ZIN (zero-in).
+
+Sliders only respond to the mouse wheel after you click them, so scrolling the
+panel can't change the transmit power by accident.
+
+## CW with the rig's own keyer
+
+A CW engine sends your macros with the radio's internal keyer (CAT `KY`) — no
+WinKeyer, no second cable. Pick **Yaesu (rig keyer)** in Settings → CW keyer.
+
+- Works on the **FTDX101 / FT-991A / FT-710** family.
+- An **FTDX10 does not accept it** (`KY` is refused, `DAKY` doesn't help) —
+  OpsLog says so and points to the **serial DTR keyer** on the rig's second COM
+  port (the *Serial port* CW engine), which works. See [[Audio and Keyers]].
+- CW speed is one setting everywhere: the console slider, the CW panel and the
+  rig's front panel stay in agreement.
+
+## Notes
+
+- A Yaesu that is switched off is reported as such (opening the port is not
+  "connected").
+- If your interface goes into transmit the moment OpsLog connects, enable the
+  **lower DTR/RTS on connect** option — see [[CAT Control]].

wiki/_Sidebar.md

@@ -16,6 +16,8 @@
 - [[FlexRadio]]
 - [[Icom]]
 - [[Remote Icom over the Internet]]
+- [[Yaesu]]
+- [[Kenwood and Xiegu]]
 
 **Operating**
 - [[DX Cluster and Spots]]