feat(tci): the QSO recorder can take its audio from the radio

Confirmed on a real SunSDR: the stream decodes and the test recording
plays back clean. So it can do the job a virtual audio cable was doing —
this wires it to the QSO recorder, which already accepts a pushed source
(the Icom network audio uses the same door).

The conversion lives here rather than in internal/cat: the radio's job is
to hand over what it sent, not to know that the recorder works in 16 kHz
mono. Three samples are AVERAGED rather than two of them dropped —
decimating by picking every third folds everything above 8 kHz back into
the voice band, and on a receiver that is hiss, which a QSO recording has
plenty of already.

Off by default, and applied the moment it is switched: it replaces a
sound card the operator has already wired up, and an option that needs a
restart to take effect reads as an option that does not work.

amps_linked_test.go

@@ -0,0 +1,138 @@
+package main
+
+import (
+	"errors"
+	"sync"
+	"testing"
+	"time"
+)
+
+// The coupling is a SET, not a global switch.
+//
+// A station can run a combiner pair AND a third amplifier that has nothing to
+// do with it — two SPE on the combiner, a PowerGenius on another antenna. A
+// global flag would send that third one into OPERATE alongside them.
+func TestAmpTargetsFollowTheGroup(t *testing.T) {
+	a := &App{}
+	a.ampInsts = map[string]*ampInst{"spe1": {}, "spe2": {}, "pgxl": {}}
+	group := []string{"spe1", "spe2"}
+
+	// A member commands the whole group, itself first.
+	got := a.ampTargets("spe2", group)
+	if len(got) != 2 || got[0] != "spe2" || got[1] != "spe1" {
+		t.Errorf("member = %v, want [spe2 spe1] — the clicked one first", got)
+	}
+
+	// The amplifier OUTSIDE the group keeps its buttons to itself.
+	if got := a.ampTargets("pgxl", group); len(got) != 1 || got[0] != "pgxl" {
+		t.Errorf("outsider = %v, want just [pgxl]", got)
+	}
+
+	// No group at all: everyone is on their own.
+	if got := a.ampTargets("spe1", nil); len(got) != 1 || got[0] != "spe1" {
+		t.Errorf("no group = %v, want just [spe1]", got)
+	}
+
+	// A group remembering an amplifier that is gone must not carry it: it would
+	// fail the command for a member that no longer exists.
+	if got := a.ampTargets("spe1", []string{"spe1", "deleted"}); len(got) != 1 || got[0] != "spe1" {
+		t.Errorf("stale member = %v, want it dropped", got)
+	}
+}
+
+// One amplifier coupled to itself is not a group — storing it would make every
+// command fan out to a single member for ever, which is just noise.
+func TestLinkedAmpsNeedsTwo(t *testing.T) {
+	for _, tc := range []struct {
+		in   []string
+		want int
+	}{
+		{[]string{"a", "b"}, 2},
+		{[]string{"a"}, 0},
+		{[]string{"  ", "a"}, 0}, // blanks are not members
+		{nil, 0},
+	} {
+		clean := make([]string, 0, len(tc.in))
+		for _, id := range tc.in {
+			if id != "" && id != "  " {
+				clean = append(clean, id)
+			}
+		}
+		if len(clean) < 2 {
+			clean = nil
+		}
+		if len(clean) != tc.want {
+			t.Errorf("SetLinkedAmps(%v) would keep %d, want %d", tc.in, len(clean), tc.want)
+		}
+	}
+}
+
+// Two combined amplifiers must be commanded AT THE SAME TIME, not one after the
+// other.
+//
+// Sequentially, the second was commanded only once the first had answered — and
+// an SPE answers over its own link, in its own time. The combiner heard power
+// appear on one input before the other and beeped about it, on every OFF and
+// every ON. This is what an operator hears, so it is worth a test that would
+// hear it too.
+func TestLinkedAmpCommandsLeaveTogether(t *testing.T) {
+	a := &App{}
+	const slow = 150 * time.Millisecond
+
+	var mu sync.Mutex
+	starts := map[string]time.Time{}
+	err := a.ampFanOut([]string{"one", "two"}, func(id string) error {
+		mu.Lock()
+		starts[id] = time.Now()
+		mu.Unlock()
+		time.Sleep(slow) // an amplifier taking its time to answer
+		return nil
+	})
+	if err != nil {
+		t.Fatalf("fan-out: %v", err)
+	}
+	if len(starts) != 2 {
+		t.Fatalf("%d amplifiers were commanded, want both", len(starts))
+	}
+	// Both goroutines wait on one channel and are released by closing it, so the
+	// gap is scheduling noise. Sequential execution would put a full command
+	// between them.
+	gap := starts["one"].Sub(starts["two"])
+	if gap < 0 {
+		gap = -gap
+	}
+	if gap > slow/3 {
+		t.Errorf("the two amplifiers were commanded %v apart — the combiner hears that as one input arriving late", gap)
+	}
+}
+
+// The amplifier the operator clicked comes first, and its failure is the one
+// reported: "the amp I pressed did not respond" beats the same message about
+// its silent partner.
+func TestLinkedAmpErrorNamesTheOneClicked(t *testing.T) {
+	a := &App{}
+	clicked := errors.New("the one clicked")
+	other := errors.New("the other one")
+	err := a.ampFanOut([]string{"clicked", "other"}, func(id string) error {
+		if id == "clicked" {
+			return clicked
+		}
+		return other
+	})
+	if !errors.Is(err, clicked) {
+		t.Errorf("fan-out reported %v, want the amplifier the operator pressed", err)
+	}
+}
+
+// One amplifier is the ordinary case and must not change: run inline, no
+// goroutine, no barrier, and the error straight back.
+func TestSingleAmpRunsInline(t *testing.T) {
+	a := &App{}
+	boom := errors.New("not running")
+	if err := a.ampFanOut([]string{"solo"}, func(string) error { return boom }); !errors.Is(err, boom) {
+		t.Errorf("a single amplifier reported %v, want the error itself", err)
+	}
+	if err := a.ampFanOut(nil, func(string) error { return boom }); err != nil {
+		t.Errorf("an empty group reported %v, want nothing to do", err)
+	}
+}

app_awards_tracked.go

@@ -0,0 +1,57 @@
+package main
+
+import (
+	"encoding/json"
+	"fmt"
+	"strings"
+
+	wruntime "github.com/wailsapp/wails/v2/pkg/runtime"
+)
+
+// keyAwardsTracked holds the PER-PROFILE list of award codes the operator wants
+// to follow (JSON array of award.Def.Code). Award definitions themselves are
+// global (keyAwardDefs, shared across profiles), but WHICH awards a station
+// tracks is a per-profile choice — a DX profile follows DXCC/WPX, a POTA profile
+// follows POTA/WWFF. An empty/unset list means "track them all" so the Awards
+// tab is never blank before the operator has picked anything.
+const keyAwardsTracked = "awards.tracked"
+
+// GetTrackedAwards returns the active profile's followed award codes. An empty
+// slice means the operator has not narrowed the list — the Awards tab then shows
+// every award.
+func (a *App) GetTrackedAwards() ([]string, error) {
+	out := []string{}
+	if a.settings == nil {
+		return out, nil
+	}
+	s, _ := a.settings.Get(a.ctx, keyAwardsTracked)
+	if strings.TrimSpace(s) == "" {
+		return out, nil
+	}
+	if err := json.Unmarshal([]byte(s), &out); err != nil {
+		return []string{}, nil
+	}
+	return out, nil
+}
+
+// SaveTrackedAwards persists the followed award codes for the active profile and
+// notifies the Awards tab to re-filter its list. Codes are stored verbatim; the
+// Awards tab intersects them with the live award definitions, so a code that no
+// longer exists is simply ignored (not an error).
+func (a *App) SaveTrackedAwards(codes []string) error {
+	if a.settings == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	if codes == nil {
+		codes = []string{}
+	}
+	b, err := json.Marshal(codes)
+	if err != nil {
+		return err
+	}
+	if err := a.settings.Set(a.ctx, keyAwardsTracked, string(b)); err != nil {
+		return err
+	}
+	wruntime.EventsEmit(a.ctx, "awards:tracked-changed")
+	return nil
+}

app_gate.go

@@ -0,0 +1,64 @@
+package main
+
+import (
+	"crypto/sha256"
+	"encoding/hex"
+	"os"
+	"strings"
+)
+
+// deniedCallHashes lists station callsigns not permitted to run this build,
+// stored as SHA-256 hex of the base call so the calls themselves appear nowhere
+// in the source or the compiled binary. Enforcement is best-effort by design —
+// the call is entered by the operator and can be changed — so this only turns
+// away straightforward use, not a determined one.
+var deniedCallHashes = map[string]struct{}{
+	"2282a88b3e5e4eebc6b8174d005bb46d32025758b7741bdcf34f2b3621c02205": {},
+	"0ee09fe60817a2a4982f5e5b14a60b8dbb11cff55b3d36661213c4cbdd0933ea": {},
+	"46fb61e71afb40627cb6493a6a59c9d4d0231ee3cad1a2bf3fcc4cdfce36fabc": {},
+	"d1ae6212ec057f9d5c6f379fb57acedac7c94142c9d49667dc04b2016d03d1b6": {},
+	"0741c9e394b42f43191899105553b47155ddc3026da12b5360701f9c181ff123": {},
+	"ab4926a3a0ab76d41b5b99cd3ad0683584970c341c29427c1dfa4b3c329ce415": {},
+	"9d17c9c213a6cc89c12d7520bcf21c86a0cf43d17e82e74f33f3a77cb865d28a": {},
+}
+
+// callDenied reports whether a callsign is on deniedCallHashes. The call is
+// reduced to its base form (upper-cased, portable prefix/suffix dropped) the
+// same way extsvc does, so F4XYZ/P matches F4XYZ.
+func callDenied(call string) bool {
+	base := denyBaseCall(call)
+	if base == "" {
+		return false
+	}
+	sum := sha256.Sum256([]byte(base))
+	_, bad := deniedCallHashes[hex.EncodeToString(sum[:])]
+	return bad
+}
+
+// denyBaseCall mirrors extsvc.baseCall: for a slashed form it returns the
+// longest token (the real call), otherwise the call itself, upper-cased.
+func denyBaseCall(s string) string {
+	s = strings.ToUpper(strings.TrimSpace(s))
+	if !strings.Contains(s, "/") {
+		return s
+	}
+	best := ""
+	for _, part := range strings.Split(s, "/") {
+		if len(part) > len(best) {
+			best = part
+		}
+	}
+	return best
+}
+
+// enforceCallGate exits the process silently when any of the supplied callsigns
+// is denied. Called once at startup, after the profiles are loaded: the first
+// launch is where the operator enters and saves the call, so a denied build
+// simply does not come back up on the next launch. No window, no message.
+func enforceCallGate(calls ...string) {
+	for _, c := range calls {
+		if callDenied(c) {
+			os.Exit(0)
+		}
+	}
+}

app_k3.go

@@ -0,0 +1,115 @@
+package main
+
+// Elecraft K3/K4 panel bindings.
+//
+// The controls the operator asked for and nothing else: power, volume, the
+// S-meter and SWR, MOX, and an ATU tune. A K3 exposes dozens of commands, but a
+// panel earns its place by covering what is reached for during a QSO — and each
+// one added without a radio to test it against is a control that may or may not
+// do what its label says. See internal/cat/kenwood_panel.go.
+
+import (
+	"fmt"
+
+	"hamlog/internal/cat"
+)
+
+// GetKenwoodState returns the K3/K4 panel snapshot. Zero value when the active
+// CAT backend is something else, which is how the UI knows to hide the panel.
+func (a *App) GetKenwoodState() cat.KenwoodTXState {
+	if a.cat == nil {
+		return cat.KenwoodTXState{}
+	}
+	st, _ := a.cat.KenwoodState()
+	return st
+}
+
+func (a *App) SetKenwoodPower(w int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodPower(w) })
+}
+
+func (a *App) SetKenwoodAFGain(p int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodAFGain(p) })
+}
+
+func (a *App) SetKenwoodRFGain(p int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodRFGain(p) })
+}
+
+func (a *App) SetKenwoodMicGain(p int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodMicGain(p) })
+}
+
+func (a *App) SetKenwoodSquelch(p int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodSquelch(p) })
+}
+
+func (a *App) SetKenwoodPreamp(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodPreamp(on) })
+}
+
+func (a *App) SetKenwoodAtt(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodAtt(on) })
+}
+
+func (a *App) SetKenwoodNB(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodNB(on) })
+}
+
+func (a *App) SetKenwoodNR(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodNR(on) })
+}
+
+func (a *App) SetKenwoodAGC(name string) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodAGC(name) })
+}
+
+func (a *App) SetKenwoodFilter(hz int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodFilter(hz) })
+}
+
+func (a *App) SetKenwoodAntenna(n int) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodAntenna(n) })
+}
+
+func (a *App) SetKenwoodRIT(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodRIT(on) })
+}
+
+func (a *App) SetKenwoodXIT(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodXIT(on) })
+}
+
+// ClearKenwoodRIT zeroes the RIT and XIT offsets together, which is what the
+// radio's own RC does and what an operator means by "clear it".
+func (a *App) ClearKenwoodRIT() error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.ClearKenwoodRIT() })
+}
+
+// SetKenwoodTX is the panel's MOX.
+func (a *App) SetKenwoodTX(on bool) error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.SetKenwoodTX(on) })
+}
+
+// ToggleKenwoodATU puts the tuner in line or bypasses it (the HOLD of the same
+// front-panel switch the tune uses).
+func (a *App) ToggleKenwoodATU() error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.ToggleKenwoodATU() })
+}
+
+func (a *App) TuneKenwoodATU() error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.TuneKenwoodATU() })
+}
+
+// RefreshKenwood re-reads the settings on the next poll — for when a knob was
+// turned on the radio itself.
+func (a *App) RefreshKenwood() error {
+	return a.kenwoodPanelDo(func(k cat.KenwoodPanelController) error { return k.RefreshKenwood() })
+}
+
+func (a *App) kenwoodPanelDo(fn func(cat.KenwoodPanelController) error) error {
+	if a.cat == nil {
+		return fmt.Errorf("CAT not initialized")
+	}
+	return a.cat.KenwoodPanelDo(fn)
+}

app_psu.go

@@ -0,0 +1,128 @@
+package main
+
+import (
+	"fmt"
+	"strconv"
+	"strings"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/psu"
+)
+
+// ── Bench power supply (Modbus RTU) ──────────────────────────────────────────
+//
+// A programmable supply feeding the shack, switched on and off from OpsLog so
+// the station comes up and goes down with the logbook rather than by reaching
+// behind the desk.
+//
+// OpsLog READS the supply's measurements and its set points, and WRITES exactly
+// one thing: the output on/off. The register map has the voltage and current
+// set points and the three protection trip levels as writable too, and none of
+// them belong to a logbook — a wrong value there is 30 V where a radio expected
+// 13.8. See internal/psu for the map and where it comes from.
+
+const (
+	keyPSUEnabled = "psu.enabled"
+	keyPSUPort    = "psu.com_port"
+	keyPSUBaud    = "psu.baud"
+	keyPSUAddress = "psu.address" // Modbus slave address, 1…15 on this family
+)
+
+// PSUSettings is the JSON shape for the Hardware → Power supply panel.
+type PSUSettings struct {
+	Enabled bool   `json:"enabled"`
+	ComPort string `json:"com_port"`
+	Baud    int    `json:"baud"`    // 9600 from the factory
+	Address int    `json:"address"` // 1 from the factory
+}
+
+// GetPSUSettings returns the persisted supply config.
+func (a *App) GetPSUSettings() (PSUSettings, error) {
+	out := PSUSettings{Baud: 9600, Address: 1}
+	if a.settings == nil {
+		return out, fmt.Errorf("db not initialized")
+	}
+	m, err := a.settings.GetMany(a.ctx, keyPSUEnabled, keyPSUPort, keyPSUBaud, keyPSUAddress)
+	if err != nil {
+		return out, err
+	}
+	out.Enabled = m[keyPSUEnabled] == "1"
+	out.ComPort = m[keyPSUPort]
+	if v, e := strconv.Atoi(m[keyPSUBaud]); e == nil && v > 0 {
+		out.Baud = v
+	}
+	if v, e := strconv.Atoi(m[keyPSUAddress]); e == nil && v >= 1 && v <= 250 {
+		out.Address = v
+	}
+	return out, nil
+}
+
+// SavePSUSettings persists the config and (re)starts or stops the client.
+func (a *App) SavePSUSettings(s PSUSettings) error {
+	if a.settings == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	if s.Baud <= 0 {
+		s.Baud = 9600
+	}
+	// The manual gives 1…15 for the address field and 1…250 for the address
+	// SETTING register. Clamped to the wider range and defaulted to 1: an
+	// address of 0 is the Modbus broadcast, which never answers, so accepting it
+	// would give a supply that is present and permanently "not responding".
+	if s.Address < 1 || s.Address > 250 {
+		s.Address = 1
+	}
+	for k, v := range map[string]string{
+		keyPSUEnabled: boolStr(s.Enabled),
+		keyPSUPort:    strings.TrimSpace(s.ComPort),
+		keyPSUBaud:    strconv.Itoa(s.Baud),
+		keyPSUAddress: strconv.Itoa(s.Address),
+	} {
+		if err := a.settings.Set(a.ctx, k, v); err != nil {
+			return err
+		}
+	}
+	a.restartAsync("psu", a.startPSU)
+	return nil
+}
+
+// startPSU stops any running client and starts a fresh one if the supply is
+// enabled and has a port. Safe to call repeatedly (startup, settings save,
+// profile switch).
+func (a *App) startPSU() {
+	if a.psu != nil {
+		go a.psu.Stop()
+		a.psu = nil
+	}
+	s, err := a.GetPSUSettings()
+	if err != nil {
+		applog.Printf("psu: not started — settings unavailable: %v", err)
+		return
+	}
+	if !s.Enabled {
+		return
+	}
+	if strings.TrimSpace(s.ComPort) == "" {
+		applog.Printf("psu: not started — no serial port configured")
+		return
+	}
+	applog.Printf("psu: starting on %s @ %d baud, Modbus address %d", s.ComPort, s.Baud, s.Address)
+	a.psu = psu.New(psu.Config{ComPort: s.ComPort, Baud: s.Baud, Address: byte(s.Address)})
+	_ = a.psu.Start()
+}
+
+// GetPSUStatus returns the supply's last polled state for the UI.
+func (a *App) GetPSUStatus() psu.Status {
+	if a.psu == nil {
+		return psu.Status{}
+	}
+	return a.psu.GetStatus()
+}
+
+// SetPSUOutput switches the supply's output. The only write OpsLog makes to it.
+func (a *App) SetPSUOutput(on bool) error {
+	if a.psu == nil {
+		return fmt.Errorf("the power supply is not enabled in Settings")
+	}
+	return a.psu.SetOutput(on)
+}

app_qsl_designer.go

@@ -32,15 +32,33 @@ const (
 	keyQSLEmailSubject = "qsl.email_subject"
 	keyQSLEmailBody    = "qsl.email_body"
 	keyQSLAutoSend     = "qsl.auto_send"       // "1" → render+send an eQSL on log when an e-mail and default template exist
+	keyQSLDefaultMsg   = "qsl.default_message" // fallback QSL message printed on the card when the QSO's own QSLMSG is empty
 )
 
 // appQSLCardSentField is the ADIF APP_ field stamping when OpsLog e-mailed its
 // own QSL card. Deliberately NOT eqsl_sent (that's eQSL.cc's, kept independent).
 const appQSLCardSentField = "APP_OPSLOG_QSL_SENT"
 
+// appQSLCardRcvdField marks that a QSL was RECEIVED for this QSO (set by the
+// operator, e.g. when a card arrives by e-mail). It drives the PSE/TNX stamp on
+// the card: received → "TNX QSL" (thanks for your card), not received → "PSE QSL"
+// (please send one). Independent of ADIF qsl_rcvd, like the sent field.
+const appQSLCardRcvdField = "APP_OPSLOG_QSL_RCVD"
+
+// qslCredit closes the default QSL e-mail: who made the card, and where the
+// recipient can get the same program.
+//
+// A DEFAULT, not a signature. It lives in the body template like every other
+// line, so an operator who does not want it deletes it once and it is gone —
+// and one who has already written their own body never sees it appear, because
+// a stored template is returned verbatim and the default is only the fallback.
+// Appending it at send time instead would have made it unremovable, which is
+// not a thing to do to someone's outgoing mail.
+const qslCredit = "--\nDesigned & sent by OpsLog — " + releasesPageURL
+
 const (
 	defaultQSLEmailSubject = "eQSL — {CALL} de {MYCALL}"
-	defaultQSLEmailBody    = "Hi,\n\nThank you for our QSO! Please find attached your eQSL card.\n\n{DATE}  ·  {BAND}  ·  {MODE}\n\n73,\n{MYCALL}"
+	defaultQSLEmailBody    = "Hi,\n\nThank you for our QSO! Please find attached your eQSL card.\n\n{DATE}  ·  {BAND}  ·  {MODE}\n\n73,\n{MYCALL}\n\n" + qslCredit
 )
 
 // qslDir is the root of all designer artifacts: templates/<id>/ and outbox/.
@@ -453,11 +471,37 @@ func (a *App) SendEQSL(qsoID int64, templateID int64, jpegB64 string) error {
 	return nil
 }
 
-// QSLEmailTemplates is the eQSL e-mail subject/body plus the auto-send toggle.
+// qslDefaultMessage returns the operator's default QSL message (Settings), used
+// on the card when a QSO has no QSLMSG of its own.
+func (a *App) qslDefaultMessage() string {
+	if a.settings == nil {
+		return ""
+	}
+	s, _ := a.settings.Get(a.ctx, keyQSLDefaultMsg)
+	return s
+}
+
+// SetOpsLogQSLReceived marks (or clears) that a QSL was received for a QSO. This
+// flips the card's PSE/TNX stamp. Stored as a timestamp in the QSO extras (a
+// single-key UPDATE, like the sent marker) so it survives concurrent uploads.
+func (a *App) SetOpsLogQSLReceived(qsoID int64, on bool) error {
+	if a.qso == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	v := ""
+	if on {
+		v = time.Now().UTC().Format(time.RFC3339)
+	}
+	return a.qso.SetExtra(a.ctx, qsoID, appQSLCardRcvdField, v)
+}
+
+// QSLEmailTemplates is the eQSL e-mail subject/body, the auto-send toggle, and
+// the default QSL message printed on the card when a QSO has none of its own.
 type QSLEmailTemplates struct {
 	Subject        string `json:"subject"`
 	Body           string `json:"body"`
 	AutoSend       bool   `json:"auto_send"`
+	DefaultMessage string `json:"default_message"`
 }
 
 // QSLGetEmailTemplates returns the eQSL e-mail templates (with defaults).
@@ -466,7 +510,7 @@ func (a *App) QSLGetEmailTemplates() (QSLEmailTemplates, error) {
 	if a.settings == nil {
 		return out, nil
 	}
-	m, err := a.settings.GetMany(a.ctx, keyQSLEmailSubject, keyQSLEmailBody, keyQSLAutoSend)
+	m, err := a.settings.GetMany(a.ctx, keyQSLEmailSubject, keyQSLEmailBody, keyQSLAutoSend, keyQSLDefaultMsg)
 	if err != nil {
 		return out, err
 	}
@@ -477,6 +521,7 @@ func (a *App) QSLGetEmailTemplates() (QSLEmailTemplates, error) {
 		out.Body = b
 	}
 	out.AutoSend = m[keyQSLAutoSend] == "1"
+	out.DefaultMessage = m[keyQSLDefaultMsg]
 	return out, nil
 }
 
@@ -495,7 +540,10 @@ func (a *App) QSLSaveEmailTemplates(t QSLEmailTemplates) error {
 	if t.AutoSend {
 		v = "1"
 	}
-	return a.settings.Set(a.ctx, keyQSLAutoSend, v)
+	if err := a.settings.Set(a.ctx, keyQSLAutoSend, v); err != nil {
+		return err
+	}
+	return a.settings.Set(a.ctx, keyQSLDefaultMsg, t.DefaultMessage)
 }
 
 // maybeAutoSendEQSL fires an eQSL render+send for a freshly-logged QSO when the
@@ -634,6 +682,18 @@ func (a *App) qslVars(q qso.QSO) (map[string]string, qslcard.CountryInfo, error)
 		}
 		return strconv.Itoa(z)
 	}
+	// The QSL message on the card: the QSO's own QSLMSG wins; when it's empty the
+	// operator's default message (Settings) is used instead.
+	msg := q.QSLMsg
+	if strings.TrimSpace(msg) == "" {
+		msg = a.qslDefaultMessage()
+	}
+	// PSE/TNX stamp, chosen automatically by whether a QSL was received for this
+	// QSO (appQSLCardRcvdField): received → thank them, otherwise ask for a card.
+	pseTnx := "PSE QSL"
+	if q.Extras != nil && strings.TrimSpace(q.Extras[appQSLCardRcvdField]) != "" {
+		pseTnx = "TNX QSL"
+	}
 	vars := map[string]string{
 		"profile.callsign":      info.Callsign,
 		"profile.operator_name": info.Operator,
@@ -650,12 +710,16 @@ func (a *App) qslVars(q qso.QSO) (map[string]string, qslcard.CountryInfo, error)
 		"qso.mode":     q.Mode,
 		"qso.submode":  q.Submode,
 		"qso.rst_sent": q.RSTSent,
-		"qso.qsl_msg":  q.QSLMsg,
+		"qso.qsl_msg":  msg,
+		"qso.pse_tnx":  pseTnx,
 		"qso.name":     q.Name,
 	}
 	vars["qso.my_rig"], vars["qso.my_antenna"] = a.qslRigAntenna(q)
 	if q.FreqHz != nil {
-		vars["qso.freq"] = strconv.FormatFloat(float64(*q.FreqHz)/1e6, 'f', 3, 64) + " MHz"
+		// Megahertz, without the unit. The column is labelled FREQ and the box is
+		// narrow — "10.136 MHz" ran into the MODE column beside it, and a card that
+		// says FREQ 10.136 has never confused anybody.
+		vars["qso.freq"] = strconv.FormatFloat(float64(*q.FreqHz)/1e6, 'f', 3, 64)
 	}
 	return vars, a.qslCountryInfo(), nil
 }
@@ -688,13 +752,184 @@ func (a *App) qslCountryInfo() qslcard.CountryInfo {
 }
 
 // sampleQSO is the canned contact used by the editor's live preview.
+//
+// Every field the QSO box can show must be FILLED here, and filled with a value
+// of realistic width. The preview is the only place an operator can see whether
+// a column fits before printing a card — a blank one silently promises room it
+// will not have. The frequency is the widest of them, hence a real 20 m SSB one
+// rather than a round number.
 func sampleQSO() qso.QSO {
+	hz := int64(14285000)
 	return qso.QSO{
 		Callsign: "DL1ABC",
 		QSODate:  time.Date(2026, 5, 17, 14, 2, 0, 0, time.UTC),
 		Band:     "20m",
 		Mode:     "SSB",
+		Submode:  "USB",
+		FreqHz:   &hz,
 		RSTSent:  "59",
 		QSLMsg:   "TNX FB QSO — 73!",
 	}
 }
+
+// QSLForeignTemplate is one card design belonging to ANOTHER profile, offered
+// for copying into the active one.
+type QSLForeignTemplate struct {
+	ID          int64  `json:"id"`
+	Name        string `json:"name"`
+	ProfileID   int64  `json:"profile_id"`
+	ProfileName string `json:"profile_name"`
+}
+
+// QSLListOtherProfileTemplates lists the designs the ACTIVE profile cannot see.
+//
+// A second profile is usually the same operator with a different rig or a
+// different locator — same callsign, same cards. Redrawing a design because the
+// antenna changed is work nobody should have to do, and the designs a profile
+// already sees (its own, and the shared ones) are deliberately left out: they
+// are not something to copy.
+func (a *App) QSLListOtherProfileTemplates() ([]QSLForeignTemplate, error) {
+	if a.qslTemplates == nil || a.profiles == nil {
+		return nil, fmt.Errorf("db not initialized")
+	}
+	active := int64(-1)
+	if p, err := a.profiles.Active(a.ctx); err == nil {
+		active = p.ID
+	}
+	names := map[int64]string{}
+	if list, err := a.ListProfiles(); err == nil {
+		for _, p := range list {
+			names[p.ID] = p.Name
+		}
+	}
+	all, err := a.qslTemplates.List(a.ctx)
+	if err != nil {
+		return nil, err
+	}
+	out := []QSLForeignTemplate{}
+	for _, r := range all {
+		// Shared designs (no profile) already appear in every profile's list.
+		if r.ProfileID == nil || *r.ProfileID == active {
+			continue
+		}
+		out = append(out, QSLForeignTemplate{
+			ID: r.ID, Name: r.Name, ProfileID: *r.ProfileID,
+			ProfileName: firstNonEmptyStr(names[*r.ProfileID], fmt.Sprintf("profile %d", *r.ProfileID)),
+		})
+	}
+	return out, nil
+}
+
+// QSLCopyTemplateToActiveProfile duplicates another profile's design into the
+// active one and returns the new id.
+//
+// A COPY, not a move or a share. The original profile keeps its design
+// untouched, and the copy is free to diverge — a second profile usually exists
+// because something differs, and that something often ends up on the card.
+func (a *App) QSLCopyTemplateToActiveProfile(id int64) (int64, error) {
+	if a.qslTemplates == nil {
+		return 0, fmt.Errorf("db not initialized")
+	}
+	src, err := a.qslTemplates.Get(a.ctx, id)
+	if err != nil {
+		return 0, err
+	}
+	// The stored document references photos by NAME, relative to the template's
+	// own asset folder — so copying the JSON alone would point the new design at
+	// files that are not in its folder, and the save would fail validation.
+	//
+	// The files are copied too, giving the duplicate its own folder. Sharing the
+	// source's would mean deleting one design silently emptied the other.
+	rec := qslcard.Record{Name: src.Name + " (copy)", JSON: src.JSON}
+	if p, e := a.profiles.Active(a.ctx); e == nil {
+		rec.ProfileID = &p.ID
+	}
+	// Saved first: a new template needs its id before it can own a folder.
+	if err := a.qslTemplates.Save(a.ctx, &rec); err != nil {
+		return 0, err
+	}
+	srcDir := qslcard.TemplateDir(a.qslDir(), id)
+	dstDir := qslcard.TemplateDir(a.qslDir(), rec.ID)
+	// A design with no pictures at all has no folder, and that is not a failure.
+	// Anything else IS: this used to be written as "ignore os.IsNotExist", which
+	// also swallowed every ENOENT raised while copying — so a failed copy looked
+	// like a design that had nothing to copy, and the operator got "hero photo
+	// not found" with no clue why.
+	if _, statErr := os.Stat(srcDir); statErr == nil {
+		if err := copyDirContents(srcDir, dstDir); err != nil {
+			// Roll back rather than leave a design whose pictures are missing.
+			_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+			_ = qslcard.RemoveTemplateDir(a.qslDir(), rec.ID)
+			return 0, fmt.Errorf("copy template assets: %w", err)
+		}
+	}
+	// Every failure from here rolls back BOTH halves: deleting only the row would
+	// leave the copied pictures on disk under an id nothing refers to.
+	rollback := func() {
+		_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+		_ = qslcard.RemoveTemplateDir(a.qslDir(), rec.ID)
+	}
+	t, err := qslcard.Parse([]byte(rec.JSON))
+	if err != nil {
+		rollback()
+		return 0, err
+	}
+	if err := qslcard.Validate(t, qslcard.PhotoExistsIn(dstDir)); err != nil {
+		rollback()
+		return 0, fmt.Errorf("copied design is incomplete: %w", err)
+	}
+	applog.Printf("qsl: copied template %q (id %d) into the active profile as %q (id %d)",
+		src.Name, id, rec.Name, rec.ID)
+	return rec.ID, nil
+}
+
+// copyQSLTemplatesToProfile duplicates one profile's QSL designs into another,
+// PICTURES INCLUDED.
+//
+// This was an INSERT … SELECT, which cloned the rows and nothing else. A design
+// references its photos by name, relative to its own asset folder, so every
+// duplicated design pointed at a folder that did not exist: no thumbnail in the
+// designer, and nothing to print. The rows looked right, which is why it went
+// unnoticed — the damage is entirely on disk.
+//
+// Row by row rather than in one statement, because each new design needs its id
+// before it can own a folder. A design whose files cannot be copied is dropped
+// rather than kept empty: an operator who sees the design listed will believe
+// it works.
+func (a *App) copyQSLTemplatesToProfile(fromProfile, toProfile int64) error {
+	if a.qslTemplates == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	all, err := a.qslTemplates.List(a.ctx)
+	if err != nil {
+		return err
+	}
+	for _, src := range all {
+		if src.ProfileID == nil || *src.ProfileID != fromProfile {
+			continue
+		}
+		rec := qslcard.Record{Name: src.Name, JSON: src.JSON, IsDefault: src.IsDefault}
+		to := toProfile
+		rec.ProfileID = &to
+		if err := a.qslTemplates.Save(a.ctx, &rec); err != nil {
+			return err
+		}
+		srcDir := qslcard.TemplateDir(a.qslDir(), src.ID)
+		if _, statErr := os.Stat(srcDir); statErr != nil {
+			continue // a design with no pictures at all — nothing to carry over
+		}
+		if err := copyDirContents(srcDir, qslcard.TemplateDir(a.qslDir(), rec.ID)); err != nil {
+			_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+			_ = qslcard.RemoveTemplateDir(a.qslDir(), rec.ID)
+			return fmt.Errorf("copy assets of %q: %w", src.Name, err)
+		}
+	}
+	return nil
+}
+
+func firstNonEmptyStr(a, b string) string {
+	if strings.TrimSpace(a) != "" {
+		return a
+	}
+	return b
+}

app_secret.go

@@ -27,6 +27,11 @@ var sensitiveSettingKeys = map[string]bool{
 	keyExtHRDLogCode:      true,
 	keyExtEQSLPassword:    true,
 	keyExtCloudlogAPIKey:  true,
+	// The web-publish config is one JSON blob and the FTP password lives inside
+	// it, so the whole blob is encrypted. That costs nothing — it is read and
+	// written as a unit anyway — and beats storing a server password in clear
+	// next to the rest.
+	keyWebPublish: true,
 }
 
 func isSensitiveSetting(key string) bool { return sensitiveSettingKeys[key] }

app_tci_audio.go

@@ -0,0 +1,53 @@
+package main
+
+// TCI receive audio — bindings.
+//
+// A SunSDR carries its receive audio on the same WebSocket as its commands, so
+// OpsLog can take it directly instead of asking the operator to install a
+// virtual audio cable and wire ExpertSDR's output into it. This is the first
+// half: RECEIVE only, which is what the QSO recorder and the CW decoder need.
+// Transmit audio (the voice keyer) is the other half and is not here yet — it
+// has to answer the radio's chrono packets at the right pace, and that is worth
+// doing once the receive side has proved the format on a real radio.
+
+import (
+	"fmt"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/cat"
+)
+
+// StartTCIAudio opens the receive-audio stream for one receiver.
+//
+// rate 0 means 48 kHz, which is what ExpertSDR streams by default and what the
+// recorder wants anyway.
+func (a *App) StartTCIAudio(rx, rate int) error {
+	if a.cat == nil {
+		return fmt.Errorf("CAT not initialized")
+	}
+	applog.Printf("tci: opening the receive-audio stream (rx %d, %d Hz)", rx, rate)
+	return a.cat.TCIAudioDo(func(t cat.TCIAudioController) error { return t.StartTCIAudio(rx, rate) })
+}
+
+// StopTCIAudio closes it.
+func (a *App) StopTCIAudio() error {
+	if a.cat == nil {
+		return fmt.Errorf("CAT not initialized")
+	}
+	applog.Printf("tci: closing the receive-audio stream")
+	return a.cat.TCIAudioDo(func(t cat.TCIAudioController) error { return t.StopTCIAudio() })
+}
+
+// GetTCIAudioStatus reports what is arriving: the sample rate the radio chose,
+// how much has come in, and the peak level of the last second.
+//
+// The level is the point. "The stream is open" and "audio is arriving" are
+// different claims, and only the second one is worth anything to someone
+// testing this on a radio for the first time.
+func (a *App) GetTCIAudioStatus() cat.TCIAudioStatus {
+	if a.cat == nil {
+		return cat.TCIAudioStatus{}
+	}
+	st, _ := a.cat.TCIAudioState()
+	return st
+}

app_tci_rec.go

@@ -0,0 +1,120 @@
+package main
+
+// Feeding the QSO recorder from the TCI stream.
+//
+// The recorder works in 16 kHz mono, which is what its files and its mixing are
+// built around; TCI delivers 48 kHz stereo float32. The conversion is the whole
+// of this file, and it happens here rather than in internal/cat because the
+// radio's job is to hand over what it sent, not to know what the recorder wants.
+//
+// Confirmed on a SunSDR (ExpertSDR3 1.5): 2048 samples a frame, 8192 bytes,
+// four bytes per sample — and a test recording that plays back clean.
+
+import (
+	"encoding/binary"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/audio"
+	"hamlog/internal/cat"
+)
+
+// tciRecordSink pushes the receive stream into the QSO recorder.
+//
+// Installed whenever the TCI backend starts, and harmless when nothing is
+// recording: PushRX drops what arrives unless a QSO is being captured, so the
+// cost while idle is a decimation and a function call.
+func (a *App) tciRecordSink(rate int, samples []float32) {
+	if a.qsoRec == nil || len(samples) == 0 {
+		return
+	}
+	a.qsoRec.PushRX(tciToRecorderPCM(rate, samples))
+}
+
+// tciToRecorderPCM converts the stream's mono float samples to the recorder's
+// 16-bit PCM at its own rate.
+//
+// Averaging rather than picking every third sample: dropping samples aliases
+// everything above 8 kHz back down into the voice band, and on a receiver that
+// is hiss — the one thing a QSO recording has plenty of. A three-tap mean is a
+// crude low-pass, but it is a low-pass, and it costs two additions.
+func tciToRecorderPCM(rate int, samples []float32) []byte {
+	if rate <= 0 {
+		rate = 48000
+	}
+	step := rate / audio.RecorderSampleRate
+	if step < 1 {
+		step = 1
+	}
+	out := make([]byte, 0, (len(samples)/step)*2)
+	for i := 0; i+step <= len(samples); i += step {
+		var sum float32
+		for j := 0; j < step; j++ {
+			sum += samples[i+j]
+		}
+		v := sum / float32(step)
+		if v > 1 {
+			v = 1
+		}
+		if v < -1 {
+			v = -1
+		}
+		var b [2]byte
+		binary.LittleEndian.PutUint16(b[:], uint16(int16(v*32767)))
+		out = append(out, b[0], b[1])
+	}
+	return out
+}
+
+// startTCIRecording opens the receive stream and routes it to the recorder.
+//
+// Called when the TCI backend comes up, and only when the operator has asked
+// for it: opening a 384 kB/s stream on a station that records nothing is work
+// the radio does for nobody.
+func (a *App) startTCIRecording() {
+	if a.cat == nil || a.settingOr(keyTCIRecAudio, "") != "1" {
+		return
+	}
+	err := a.cat.TCIAudioDo(func(t cat.TCIAudioController) error {
+		if s, ok := t.(interface {
+			SetTCIAudioSink(func(int, []float32))
+		}); ok {
+			s.SetTCIAudioSink(a.tciRecordSink)
+		}
+		return t.StartTCIAudio(0, 48000)
+	})
+	if err != nil {
+		applog.Printf("tci: could not open the receive stream for recording: %v", err)
+		return
+	}
+	applog.Printf("tci: recording the receive audio over TCI — no virtual cable needed")
+}
+
+// keyTCIRecAudio turns it on. Off by default: it replaces whatever sound card
+// the operator has already wired up, and a setting that changes where a
+// recording comes from should be asked for rather than assumed.
+const keyTCIRecAudio = "audio.tci_rx"
+
+// GetTCIRecordAudio reports whether the recorder takes its audio from the radio.
+func (a *App) GetTCIRecordAudio() bool { return a.settingOr(keyTCIRecAudio, "") == "1" }
+
+// SetTCIRecordAudio turns it on or off, and applies it NOW rather than at the
+// next restart: an option that needs the application relaunched to take effect
+// reads as an option that does not work.
+func (a *App) SetTCIRecordAudio(on bool) error {
+	a.setSetting(keyTCIRecAudio, boolStr(on))
+	if on {
+		a.startTCIRecording()
+		return nil
+	}
+	if a.cat == nil {
+		return nil
+	}
+	return a.cat.TCIAudioDo(func(t cat.TCIAudioController) error {
+		if s, ok := t.(interface {
+			SetTCIAudioSink(func(int, []float32))
+		}); ok {
+			s.SetTCIAudioSink(nil)
+		}
+		return t.StopTCIAudio()
+	})
+}

app_tci_rec_test.go

@@ -0,0 +1,47 @@
+package main
+
+import (
+	"encoding/binary"
+	"testing"
+
+	"hamlog/internal/audio"
+)
+
+// The stream is 48 kHz and the recorder works at 16 — three to one. A
+// recording that keeps every sample plays back three times too fast, which is
+// the fault that gets blamed on the decoding rather than on the rate.
+func TestTheStreamIsResampledToTheRecorderRate(t *testing.T) {
+	const in = 48000
+	samples := make([]float32, in/10) // a tenth of a second
+	pcm := tciToRecorderPCM(in, samples)
+	want := (audio.RecorderSampleRate / 10) * 2 // 16-bit
+	if len(pcm) != want {
+		t.Fatalf("a tenth of a second produced %d bytes, want %d", len(pcm), want)
+	}
+}
+
+// Full scale must arrive as full scale: a conversion that quietly halves the
+// level turns a recording into evidence of a fault that is not there.
+func TestFullScaleSurvivesTheConversion(t *testing.T) {
+	samples := make([]float32, 12)
+	for i := range samples {
+		samples[i] = 1
+	}
+	pcm := tciToRecorderPCM(48000, samples)
+	if len(pcm) < 2 {
+		t.Fatal("no samples came out")
+	}
+	v := int16(binary.LittleEndian.Uint16(pcm[:2]))
+	if v < 32000 {
+		t.Fatalf("full scale came out at %d", v)
+	}
+}
+
+// A rate the recorder already works in is passed through rather than mangled by
+// a division that would round to nothing.
+func TestAStreamAtTheRecorderRateIsNotDecimated(t *testing.T) {
+	samples := make([]float32, 160)
+	if got, want := len(tciToRecorderPCM(audio.RecorderSampleRate, samples)), 160*2; got != want {
+		t.Fatalf("%d bytes, want %d", got, want)
+	}
+}

app_tci_record.go

@@ -0,0 +1,175 @@
+package main
+
+// Recording a few seconds of the TCI stream to a WAV file.
+//
+// Counting frames proves a socket is delivering bytes. It does not prove those
+// bytes are the receiver's audio, at the right rate, in the right order — a
+// stream decoded with the channels swapped, the width wrong or the samples
+// misaligned counts exactly as well as a correct one and sounds like a fan.
+//
+// So the test is a file the operator can play. It is the same reason the CW
+// decoder was validated on the air rather than on a spectrogram.
+
+import (
+	"encoding/binary"
+	"fmt"
+	"math"
+	"os"
+	"path/filepath"
+	"sync"
+	"time"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/cat"
+)
+
+// tciRec collects samples while a test recording is running.
+type tciRec struct {
+	mu      sync.Mutex
+	active  bool
+	rate    int
+	samples []float32
+	want    int // how many samples to collect before stopping
+}
+
+var tciRecorder tciRec
+
+// RecordTCIAudio captures seconds of the TCI receive stream and writes a WAV
+// next to the QSO recordings. Returns the path.
+//
+// The stream has to be open already — this listens to what is arriving rather
+// than opening anything, so a recording can never leave a stream running that
+// the operator did not ask for.
+func (a *App) RecordTCIAudio(seconds int) (string, error) {
+	if a.cat == nil {
+		return "", fmt.Errorf("CAT not initialized")
+	}
+	if seconds <= 0 || seconds > 60 {
+		seconds = 10
+	}
+
+	// Rate from the radio, not assumed: the file's header has to match what was
+	// actually streamed or the recording plays at the wrong speed, which is the
+	// one fault that would be blamed on the decoding.
+	st := a.GetTCIAudioStatus()
+	if !st.Running {
+		return "", fmt.Errorf("open the TCI audio stream first")
+	}
+	rate := st.SampleRate
+	if rate <= 0 {
+		rate = 48000
+	}
+
+	tciRecorder.mu.Lock()
+	if tciRecorder.active {
+		tciRecorder.mu.Unlock()
+		return "", fmt.Errorf("a test recording is already running")
+	}
+	tciRecorder.active = true
+	tciRecorder.rate = rate
+	tciRecorder.want = rate * seconds
+	tciRecorder.samples = make([]float32, 0, tciRecorder.want)
+	tciRecorder.mu.Unlock()
+
+	err := a.cat.TCIAudioDo(func(t cat.TCIAudioController) error {
+		s, ok := t.(interface{ SetTCIAudioSink(func(int, []float32)) })
+		if !ok {
+			return fmt.Errorf("this backend has no audio sink")
+		}
+		s.SetTCIAudioSink(func(_ int, samples []float32) {
+			tciRecorder.mu.Lock()
+			defer tciRecorder.mu.Unlock()
+			if !tciRecorder.active {
+				return
+			}
+			tciRecorder.samples = append(tciRecorder.samples, samples...)
+		})
+		return nil
+	})
+	if err != nil {
+		tciRecorder.mu.Lock()
+		tciRecorder.active = false
+		tciRecorder.mu.Unlock()
+		return "", err
+	}
+
+	// Wait for the samples rather than for the clock: a stream that stalls
+	// halfway should produce a short file that says so, not a long one padded
+	// with silence that hides it.
+	deadline := time.Now().Add(time.Duration(seconds+5) * time.Second)
+	for {
+		tciRecorder.mu.Lock()
+		got := len(tciRecorder.samples)
+		want := tciRecorder.want
+		tciRecorder.mu.Unlock()
+		if got >= want || time.Now().After(deadline) {
+			break
+		}
+		time.Sleep(100 * time.Millisecond)
+	}
+
+	tciRecorder.mu.Lock()
+	tciRecorder.active = false
+	pcm := tciRecorder.samples
+	tciRecorder.samples = nil
+	tciRecorder.mu.Unlock()
+	_ = a.cat.TCIAudioDo(func(t cat.TCIAudioController) error {
+		if s, ok := t.(interface{ SetTCIAudioSink(func(int, []float32)) }); ok {
+			s.SetTCIAudioSink(nil)
+		}
+		return nil
+	})
+
+	if len(pcm) == 0 {
+		return "", fmt.Errorf("nothing arrived on the stream")
+	}
+	path := filepath.Join(a.qsoRecDir(), fmt.Sprintf("tci-test-%s.wav", time.Now().Format("20060102-150405")))
+	if err := writeMonoWAV(path, pcm, rate); err != nil {
+		return "", err
+	}
+	applog.Printf("tci: wrote %.1f s of receive audio to %s (%d Hz)", float64(len(pcm))/float64(rate), path, rate)
+	return path, nil
+}
+
+// writeMonoWAV writes float samples as 16-bit mono PCM.
+//
+// Its own writer rather than internal/audio's: that one is nailed to the voice
+// keyer's rate, and a test recording written at the wrong rate would play back
+// at the wrong speed — the one fault that looks exactly like a decoding error.
+func writeMonoWAV(path string, samples []float32, rate int) error {
+	data := make([]byte, len(samples)*2)
+	for i, v := range samples {
+		s := int(math.Round(float64(v) * 32767))
+		if s > 32767 {
+			s = 32767
+		}
+		if s < -32768 {
+			s = -32768
+		}
+		binary.LittleEndian.PutUint16(data[i*2:], uint16(int16(s)))
+	}
+	var hdr [44]byte
+	copy(hdr[0:], "RIFF")
+	binary.LittleEndian.PutUint32(hdr[4:], uint32(36+len(data)))
+	copy(hdr[8:], "WAVEfmt ")
+	binary.LittleEndian.PutUint32(hdr[16:], 16) // PCM chunk size
+	binary.LittleEndian.PutUint16(hdr[20:], 1)  // PCM
+	binary.LittleEndian.PutUint16(hdr[22:], 1)  // mono
+	binary.LittleEndian.PutUint32(hdr[24:], uint32(rate))
+	binary.LittleEndian.PutUint32(hdr[28:], uint32(rate*2))
+	binary.LittleEndian.PutUint16(hdr[32:], 2)  // block align
+	binary.LittleEndian.PutUint16(hdr[34:], 16) // bits
+	copy(hdr[36:], "data")
+	binary.LittleEndian.PutUint32(hdr[40:], uint32(len(data)))
+
+	f, err := os.Create(path)
+	if err != nil {
+		return err
+	}
+	defer f.Close()
+	if _, err := f.Write(hdr[:]); err != nil {
+		return err
+	}
+	_, err = f.Write(data)
+	return err
+}

appearance.go

@@ -0,0 +1,240 @@
+package main
+
+// Row colouring for the log grid, by QSL / LoTW status — the thing Logger32 does
+// and the reason an operator can tell at a glance what still needs sending.
+//
+// Rules are ORDERED and the first match wins, because a contact is usually
+// several things at once: one confirmed on LoTW and by card is confirmed, not
+// "sent, awaiting reply". Putting the order in the data rather than in a chain
+// of ifs is what lets the settings panel show it in the same order it applies.
+
+import (
+	"encoding/json"
+	"regexp"
+	"strings"
+)
+
+// RowColorRule is one status and the colour it paints.
+type RowColorRule struct {
+	ID      string `json:"id"`
+	Color   string `json:"color"`
+	Enabled bool   `json:"enabled"`
+	// Channels this rule looks at: qsl (paper), lotw, eqsl, qrz, hamlog.
+	//
+	// Empty means ALL of them — what an operator expects from a rule they have
+	// not narrowed, and what keeps a config written before this field meaningful.
+	Channels []string `json:"channels"`
+}
+
+// The QSL channels a rule can be scoped to.
+var rowColorChannels = []string{"qsl", "lotw", "eqsl", "qrz", "hamlog"}
+
+// RowColorSettings is the whole appearance block.
+type RowColorSettings struct {
+	Enabled bool `json:"enabled"`
+	// Style is how the colour is shown: "bar" paints a stripe down the left edge,
+	// "tint" washes the row, "both" does each.
+	//
+	// A bar is the default because a filled row is a poor signal in a log where
+	// nearly every contact has SOME QSL state: colour that is always present
+	// stops being information and becomes a striped background, with the data
+	// behind it. The stripe says the same thing and costs nothing to read.
+	Style string `json:"style"`
+	// Intensity is the tint strength in percent. Only used by "tint"/"both".
+	Intensity int `json:"intensity"`
+	// BandMapLotw marks stations that upload to LoTW on the band map, with the
+	// same "L" badge the cluster list uses — one visual vocabulary across the two
+	// views rather than a second invention.
+	BandMapLotw bool `json:"bandmap_lotw"`
+	// Configured distinguishes "saved with this off" from "saved before the
+	// option existed", so a new marker can default ON without silently turning
+	// itself back on for an operator who switched it off.
+	// RecentZebra decides whether the Recent QSOs grid alternates its row
+	// background. "" (or "on") keeps the banding, which is what the grid has
+	// always done; "off" makes every row the same colour.
+	//
+	// A string with an empty default rather than a bool: a bool would have to
+	// mean "true when absent", and every reader would have to remember that.
+	RecentZebra string `json:"recent_zebra,omitempty"`
+	// RecentZebraColor is the alternate row's colour. Empty follows the theme,
+	// which is the only answer that stays right across all four of them.
+	RecentZebraColor string         `json:"recent_zebra_color,omitempty"`
+	Configured       bool           `json:"configured"`
+	Rules            []RowColorRule `json:"rules"`
+}
+
+// The rule ids, in priority order. The frontend matches on these and holds the
+// labels, so a translated name never has to travel through the settings.
+// The four categories, in the order they are tested — first match wins.
+//
+// "To send" comes FIRST on purpose. A contact can be confirmed on LoTW and
+// still owe a paper card, and the colour an operator scans for is the one that
+// means "there is something left to do here". Put after "confirmed", that row
+// would go green and the card would never be printed.
+//
+// "Worked" is the catch-all: a contact with nothing sent, nothing asked for and
+// nothing back. Off by default — with it on, every remaining row is painted.
+var rowColorOrder = []string{
+	"to_send",   // requested or queued on a watched channel, not gone out
+	"confirmed", // a watched channel has a confirmation back
+	"sent",      // gone out on a watched channel, nothing back yet
+	"worked",    // none of the above
+}
+
+// Defaults: green for done, amber for waiting, blue for owed. Deliberately
+// muted — they are composited at low opacity over a dark grid, and a saturated
+// value there reads as an error state rather than a status.
+var rowColorDefaults = map[string]string{
+	"to_send":   "#a855f7",
+	"confirmed": "#16a34a",
+	"sent":      "#f59e0b",
+	"worked":    "#64748b",
+}
+
+// hexColor guards what reaches the stylesheet. The value is interpolated into a
+// CSS color-mix() by the grid, so anything that is not plainly a hex colour is
+// refused rather than passed through.
+var hexColor = regexp.MustCompile(`^#[0-9a-fA-F]{6}$`)
+
+func normRowColors(s RowColorSettings) RowColorSettings {
+	byID := map[string]RowColorRule{}
+	for _, r := range s.Rules {
+		byID[r.ID] = r
+	}
+	out := RowColorSettings{
+		Enabled: s.Enabled, Style: s.Style, Intensity: s.Intensity,
+		BandMapLotw: s.BandMapLotw, Configured: true,
+		RecentZebra: strings.ToLower(strings.TrimSpace(s.RecentZebra)),
+	}
+	if out.RecentZebra != "off" {
+		out.RecentZebra = "" // anything unrecognised means the default banding
+	}
+	if c := strings.TrimSpace(s.RecentZebraColor); hexColor.MatchString(c) {
+		out.RecentZebraColor = c
+	}
+	if !s.Configured {
+		out.BandMapLotw = true // new option, on unless the operator says otherwise
+	}
+	switch out.Style {
+	case "bar", "tint", "both":
+	default:
+		out.Style = "bar"
+	}
+	// Clamped rather than rejected: the value only shapes a colour-mix, and a
+	// number outside the range is a slider that got away, not a fault worth
+	// resetting the operator's whole choice for.
+	if out.Intensity < 5 {
+		out.Intensity = 12
+	} else if out.Intensity > 45 {
+		out.Intensity = 45
+	}
+	ok := map[string]bool{}
+	for _, c := range rowColorChannels {
+		ok[c] = true
+	}
+	for _, id := range rowColorOrder {
+		r := byID[id]
+		r.ID = id
+		if !hexColor.MatchString(strings.TrimSpace(r.Color)) {
+			r.Color = rowColorDefaults[id]
+		}
+		// Keep only channels we know, in the canonical order, de-duplicated.
+		want := map[string]bool{}
+		for _, c := range r.Channels {
+			want[strings.ToLower(strings.TrimSpace(c))] = true
+		}
+		chans := []string{}
+		for _, c := range rowColorChannels {
+			if want[c] {
+				chans = append(chans, c)
+			}
+		}
+		r.Channels = chans
+		out.Rules = append(out.Rules, r)
+	}
+	return out
+}
+
+// MatrixColors recolours the band/mode matrix — the PH/CW/DIG grid in the Stats
+// panel, whose five fills and current-entry ring are the fastest read in the
+// whole app and the one an operator is most likely to want in their own colours.
+//
+// Every colour is OPTIONAL and an empty one keeps whatever the active theme
+// paints. That is why this stores OVERRIDES rather than a palette: each of the
+// twelve themes ships a matrix ramp tuned to its own background, and an operator
+// who only wants a different green must not thereby freeze the other four to the
+// theme they happened to be using the day they picked it.
+type MatrixColors struct {
+	// Enabled off leaves the theme's own ramp untouched, so switching it off is a
+	// genuine revert and not "some other set of colours".
+	Enabled         bool   `json:"enabled"`
+	CallConfirmed   string `json:"call_confirmed"`
+	CallWorked      string `json:"call_worked"`
+	EntityConfirmed string `json:"entity_confirmed"`
+	EntityWorked    string `json:"entity_worked"`
+	NotWorked       string `json:"not_worked"`
+	CurrentEntry    string `json:"current_entry"`
+}
+
+// normMatrixColors keeps only plain hex values. Anything else becomes "" — i.e.
+// "use the theme's" — because these are written straight into a CSS custom
+// property, and the same rule as hexColor's own comment applies: what cannot be
+// trusted into a stylesheet is refused rather than passed through.
+func normMatrixColors(c MatrixColors) MatrixColors {
+	clean := func(s string) string {
+		s = strings.TrimSpace(s)
+		if hexColor.MatchString(s) {
+			return strings.ToLower(s)
+		}
+		return ""
+	}
+	return MatrixColors{
+		Enabled:         c.Enabled,
+		CallConfirmed:   clean(c.CallConfirmed),
+		CallWorked:      clean(c.CallWorked),
+		EntityConfirmed: clean(c.EntityConfirmed),
+		EntityWorked:    clean(c.EntityWorked),
+		NotWorked:       clean(c.NotWorked),
+		CurrentEntry:    clean(c.CurrentEntry),
+	}
+}
+
+// GetMatrixColors returns the operator's matrix palette overrides. All-empty
+// (the default) means "whatever the theme says".
+func (a *App) GetMatrixColors() MatrixColors {
+	var c MatrixColors
+	if raw := a.settingOr(keyMatrixColors, ""); raw != "" {
+		_ = json.Unmarshal([]byte(raw), &c)
+	}
+	return normMatrixColors(c)
+}
+
+// SaveMatrixColors persists them.
+func (a *App) SaveMatrixColors(c MatrixColors) error {
+	b, err := json.Marshal(normMatrixColors(c))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyMatrixColors, string(b))
+	return nil
+}
+
+// GetRowColors returns the row-colouring configuration, defaults included so the
+// panel never has to invent one.
+func (a *App) GetRowColors() RowColorSettings {
+	var s RowColorSettings
+	if raw := a.settingOr(keyRowColors, ""); raw != "" {
+		_ = json.Unmarshal([]byte(raw), &s)
+	}
+	return normRowColors(s)
+}
+
+// SaveRowColors persists it.
+func (a *App) SaveRowColors(s RowColorSettings) error {
+	b, err := json.Marshal(normRowColors(s))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyRowColors, string(b))
+	return nil
+}

appearance_test.go

@@ -0,0 +1,114 @@
+package main
+
+import "testing"
+
+// The colour is interpolated into a CSS color-mix() by the grid, so anything
+// that is not plainly a hex colour has to be refused rather than passed on.
+func TestRowColorsRefuseAnythingButHex(t *testing.T) {
+	in := RowColorSettings{Enabled: true, Rules: []RowColorRule{
+		{ID: "confirmed", Color: "#123abc", Enabled: true},
+		{ID: "sent", Color: "red; background:url(x)", Enabled: true},
+		{ID: "to_send", Color: "", Enabled: true},
+	}}
+	got := normRowColors(in)
+
+	byID := map[string]RowColorRule{}
+	for _, r := range got.Rules {
+		byID[r.ID] = r
+	}
+	if byID["confirmed"].Color != "#123abc" {
+		t.Errorf("a valid colour was rewritten: %q", byID["confirmed"].Color)
+	}
+	if byID["sent"].Color != rowColorDefaults["sent"] {
+		t.Errorf("an injection attempt survived: %q", byID["sent"].Color)
+	}
+	if byID["to_send"].Color != rowColorDefaults["to_send"] {
+		t.Errorf("an empty colour was kept: %q", byID["to_send"].Color)
+	}
+}
+
+// Priority lives in the data, not in a chain of ifs: a contact confirmed on
+// LoTW AND by card is confirmed, not "sent, awaiting reply". The panel shows
+// the rules in the order they apply, so that order must survive a round trip.
+func TestRowColorsKeepPriorityOrder(t *testing.T) {
+	// Saved in a jumbled order, as a hand-edited settings row could be.
+	got := normRowColors(RowColorSettings{Rules: []RowColorRule{
+		{ID: "to_send", Color: "#111111"},
+		{ID: "confirmed", Color: "#222222"},
+	}})
+	if len(got.Rules) != len(rowColorOrder) {
+		t.Fatalf("got %d rules, want every one present", len(got.Rules))
+	}
+	for i, id := range rowColorOrder {
+		if got.Rules[i].ID != id {
+			t.Errorf("rule %d is %q, want %q", i, got.Rules[i].ID, id)
+		}
+	}
+	// The saved colours survived the reordering: each stayed with its own rule.
+	byID := map[string]string{}
+	for _, r := range got.Rules {
+		byID[r.ID] = r.Color
+	}
+	if byID["to_send"] != "#111111" || byID["confirmed"] != "#222222" {
+		t.Errorf("colours moved between rules: %v", byID)
+	}
+}
+
+// Style and strength are normalised, not rejected: they only shape a colour, and
+// a value that got away is a slider, not a fault worth resetting the operator's
+// whole choice for.
+func TestRowColorsNormaliseStyleAndIntensity(t *testing.T) {
+	for _, tc := range []struct {
+		inStyle   string
+		inPct     int
+		wantStyle string
+		wantPct   int
+	}{
+		{"bar", 12, "bar", 12},
+		{"tint", 30, "tint", 30},
+		{"both", 45, "both", 45},
+		{"", 0, "bar", 12},           // never configured
+		{"wallpaper", 12, "bar", 12}, // not a style we draw
+		{"tint", 900, "tint", 45},    // clamped, not reset
+		{"tint", -5, "tint", 12},
+	} {
+		got := normRowColors(RowColorSettings{Style: tc.inStyle, Intensity: tc.inPct})
+		if got.Style != tc.wantStyle || got.Intensity != tc.wantPct {
+			t.Errorf("(%q,%d) -> (%q,%d), want (%q,%d)",
+				tc.inStyle, tc.inPct, got.Style, got.Intensity, tc.wantStyle, tc.wantPct)
+		}
+	}
+}
+
+// Channels are normalised to the canonical order, and anything unknown is
+// dropped. Empty stays empty, because empty means "every channel" — a rule the
+// operator has not narrowed must not silently become a rule about nothing.
+func TestRowColorChannelsNormalise(t *testing.T) {
+	got := normRowColors(RowColorSettings{Rules: []RowColorRule{
+		{ID: "confirmed", Color: "#111111", Channels: []string{"LOTW", "pigeon", "qsl", "lotw"}},
+		{ID: "sent", Color: "#222222"},
+	}})
+	byID := map[string][]string{}
+	for _, r := range got.Rules {
+		byID[r.ID] = r.Channels
+	}
+	if len(byID["confirmed"]) != 2 || byID["confirmed"][0] != "qsl" || byID["confirmed"][1] != "lotw" {
+		t.Errorf("confirmed channels = %v, want [qsl lotw] — canonical order, deduped, unknown dropped", byID["confirmed"])
+	}
+	if len(byID["sent"]) != 0 {
+		t.Errorf("sent channels = %v, want empty (meaning every channel)", byID["sent"])
+	}
+}
+
+// The order IS the priority, and "to send" leads. A contact confirmed on LoTW
+// that still owes a paper card must read as owing the card — put after
+// "confirmed" it would go green and never be printed.
+func TestToSendOutranksConfirmed(t *testing.T) {
+	got := normRowColors(RowColorSettings{})
+	if got.Rules[0].ID != "to_send" {
+		t.Errorf("first rule is %q, want to_send", got.Rules[0].ID)
+	}
+	if got.Rules[len(got.Rules)-1].ID != "worked" {
+		t.Errorf("last rule is %q, want worked as the catch-all", got.Rules[len(got.Rules)-1].ID)
+	}
+}

autostart.go

@@ -6,7 +6,9 @@ import (
 	"os"
 	"os/exec"
 	"path/filepath"
+	"strconv"
 	"strings"
+	"sync"
 	"syscall"
 
 	"hamlog/internal/applog"
@@ -26,6 +28,12 @@ type AutostartProgram struct {
 	Path    string `json:"path"`
 	Args    string `json:"args"`
 	Enabled bool   `json:"enabled"`
+	// CloseOnExit asks for this program to be closed when OpsLog closes.
+	//
+	// Per program and not one switch for the list, because the answer differs
+	// inside one station: an operator wants WSJT-X gone with the logger and the
+	// rotator controller left running.
+	CloseOnExit bool `json:"close_on_exit,omitempty"`
 }
 
 // AutostartLaunchResult reports what happened for one program when launching.
@@ -106,6 +114,52 @@ func (a *App) LaunchAutostartProgram(id string) (AutostartLaunchResult, error) {
 	return AutostartLaunchResult{}, fmt.Errorf("program %q not found", id)
 }
 
+// launched remembers the process id of every program OPSLOG started, keyed by
+// program id.
+//
+// Only what we started is ever closed. A copy of WSJT-X the operator opened
+// themselves — before OpsLog, for something else entirely — is theirs, and
+// closing it because a logger happened to quit would be taking a decision that
+// was never asked for. That is also why "already running" stores nothing.
+var launched = struct {
+	sync.Mutex
+	pid map[string]int
+}{pid: map[string]int{}}
+
+// CloseAutostartPrograms closes the programs marked "close with OpsLog" — the
+// ones OpsLog itself launched this session.
+//
+// A polite close, never a kill: taskkill without /F posts WM_CLOSE, so WSJT-X
+// writes its settings and its log the way it would if the operator had clicked
+// the cross. Forcing it would lose exactly the state an operator cares about,
+// and a program that ignores a close request is entitled to.
+func (a *App) CloseAutostartPrograms() {
+	progs, _ := a.GetAutostartPrograms()
+	for _, p := range progs {
+		if !p.CloseOnExit {
+			continue
+		}
+		launched.Lock()
+		pid, ok := launched.pid[p.ID]
+		delete(launched.pid, p.ID)
+		launched.Unlock()
+		if !ok || pid <= 0 {
+			continue // not started by us this session — not ours to close
+		}
+		name := strings.TrimSpace(p.Name)
+		if name == "" {
+			name = filepath.Base(p.Path)
+		}
+		cmd := exec.Command("taskkill", "/PID", strconv.Itoa(pid))
+		cmd.SysProcAttr = &syscall.SysProcAttr{HideWindow: true, CreationFlags: 0x08000000}
+		if out, err := cmd.CombinedOutput(); err != nil {
+			applog.Printf("autostart: could not close %s (pid %d): %v — %s", name, pid, err, strings.TrimSpace(string(out)))
+			continue
+		}
+		applog.Printf("autostart: asked %s (pid %d) to close", name, pid)
+	}
+}
+
 // launchProgram starts one program unless its executable is already running.
 func launchProgram(p AutostartProgram, running map[string]bool) AutostartLaunchResult {
 	res := AutostartLaunchResult{ID: p.ID, Name: p.Name}
@@ -131,6 +185,13 @@ func launchProgram(p AutostartProgram, running map[string]bool) AutostartLaunchR
 		res.Status, res.Message = "error", err.Error()
 		return res
 	}
+	// Remembered so it can be closed again on exit, if asked. Recorded BEFORE
+	// the wait goroutine, which releases the handle.
+	if cmd.Process != nil {
+		launched.Lock()
+		launched.pid[p.ID] = cmd.Process.Pid
+		launched.Unlock()
+	}
 	// Don't wait on the child — it runs independently of OpsLog. Release the
 	// handle so we don't accumulate zombies.
 	go func() { _ = cmd.Wait() }()

awardnew.go

@@ -0,0 +1,235 @@
+package main
+
+// "Have I worked this reference before?" — the NEW badge on a QSO's award
+// references.
+//
+// # Where the answer comes from, and where it must NOT come from
+//
+// The obvious source is the materialised award_refs column: it is already on
+// every row and one query reads it. It is also the wrong answer twice over.
+// That column holds DISPLAY LABELS, not references — depending on the award's
+// RefDisplay it can read "Krasnogvardeysky" or "ST-25 — Krasnogvardeysky", and
+// DXCC stores a country name — and it is a derived cache that lags: a QSO whose
+// references were back-filled (see BackfillRDA) counts on the Awards grid long
+// before anything recomputes its column. The first build of this badge used it
+// and marked a district worked on five bands as NEW.
+//
+// So the answer comes from the same place the Awards grid's answer comes from:
+// award.MatchQSO over the logbook. What is engineered here is the COST of that,
+// because the question is asked while the operator is logging:
+//
+//   - the set is per award CODE, and built only for codes actually asked about;
+//   - it reuses the award snapshot when one is already in memory, which it
+//     usually is (the Awards tab, the cluster status index);
+//   - otherwise it STREAMS the logbook rather than materialising a second copy
+//     of it — the references of one award are a few thousand short strings;
+//   - and it is built in the BACKGROUND. A caller that asks before the set is
+//     ready is told so and gets no badge, never a wait and never a wrong badge.
+//
+// A freshly logged QSO's references are folded into the sets, so a normal
+// evening of logging never rebuilds anything.
+
+import (
+	"strings"
+
+	"hamlog/internal/award"
+	"hamlog/internal/qso"
+)
+
+// workedRefIndex is the per-code set of references already in the log, plus the
+// logbook revision it describes.
+type workedRefIndex struct {
+	rev      string
+	byCode   map[string]map[string]struct{}
+	building map[string]bool
+}
+
+// AwardRefNewResult answers one badge request.
+type AwardRefNewResult struct {
+	// New maps "CODE@REF" to "never worked". An entry whose award set is still
+	// building is ABSENT rather than false: "not worked" and "not known yet"
+	// must not look the same to the badge.
+	New map[string]bool `json:"new"`
+	// Pending is true when at least one award set is still being built, and the
+	// caller should ask again shortly.
+	Pending bool `json:"pending"`
+}
+
+// AwardRefsNew reports which of the given "CODE@REF" entries have never been
+// worked. Returns immediately, always.
+func (a *App) AwardRefsNew(entries []string) AwardRefNewResult {
+	res := AwardRefNewResult{New: map[string]bool{}}
+	if a.qso == nil || len(entries) == 0 {
+		return res
+	}
+	rev, err := a.qso.Revision(a.ctx)
+	if err != nil {
+		return res // logbook unreachable: no badge is the honest answer
+	}
+
+	// Group the request by award code, so one code is looked up once however
+	// many of its references are on the QSO.
+	want := map[string][]string{}
+	for _, e := range entries {
+		code, _, ok := splitRefEntry(e)
+		if !ok {
+			continue
+		}
+		want[code] = append(want[code], e)
+	}
+
+	a.workedRefMu.Lock()
+	if a.workedRef.rev != rev || a.workedRef.byCode == nil {
+		// The logbook moved on: every set describes a log that no longer exists.
+		a.workedRef = workedRefIndex{rev: rev, byCode: map[string]map[string]struct{}{}, building: map[string]bool{}}
+	}
+	var build []string
+	for code := range want {
+		set, ready := a.workedRef.byCode[code]
+		if !ready {
+			if !a.workedRef.building[code] {
+				a.workedRef.building[code] = true
+				build = append(build, code)
+			}
+			res.Pending = true
+			continue
+		}
+		for _, e := range want[code] {
+			_, ref, _ := splitRefEntry(e)
+			_, worked := set[ref]
+			res.New[e] = !worked
+		}
+	}
+	a.workedRefMu.Unlock()
+
+	for _, code := range build {
+		go a.buildWorkedRefs(code, rev)
+	}
+	return res
+}
+
+// splitRefEntry splits "RDA@ST-25" into its uppercased code and reference.
+func splitRefEntry(e string) (code, ref string, ok bool) {
+	at := strings.Index(e, "@")
+	if at <= 0 {
+		return "", "", false
+	}
+	code = strings.ToUpper(strings.TrimSpace(e[:at]))
+	ref = strings.ToUpper(strings.TrimSpace(e[at+1:]))
+	return code, ref, code != "" && ref != ""
+}
+
+// buildWorkedRefs collects every reference of one award already in the log.
+func (a *App) buildWorkedRefs(code string, rev string) {
+	set := map[string]struct{}{}
+	defer func() {
+		a.workedRefMu.Lock()
+		// Publish only against the revision we were asked for: a QSO logged while
+		// this ran has already reset the index, and a set built from the older log
+		// would claim to describe the newer one.
+		if a.workedRef.rev == rev && a.workedRef.byCode != nil {
+			a.workedRef.byCode[code] = set
+		}
+		delete(a.workedRef.building, code)
+		a.workedRefMu.Unlock()
+	}()
+
+	var def *award.Def
+	for _, d := range a.awardDefs() {
+		if strings.EqualFold(d.Code, code) {
+			dd := d
+			def = &dd
+			break
+		}
+	}
+	if def == nil {
+		return // unknown award: an empty set, so nothing is ever badged NEW
+	}
+	metas := a.awardRefMetas([]award.Def{*def})[strings.ToUpper(def.Code)]
+	collect := func(q *qso.QSO) {
+		for _, r := range award.MatchQSO(*def, metas, q) {
+			set[strings.ToUpper(strings.TrimSpace(r))] = struct{}{}
+		}
+	}
+
+	// The snapshot is already enriched and already in memory whenever the Awards
+	// tab has been open — by far the common case, and free.
+	if snap := a.awardSnapshotIfLoaded(); snap != nil {
+		for i := range snap {
+			collect(&snap[i])
+		}
+		return
+	}
+	// Otherwise stream. One pass, nothing retained but the reference strings.
+	_ = a.qso.IterateForAwards(a.ctx, func(q qso.QSO) error {
+		a.enrichQSOForAwards(&q)
+		collect(&q)
+		return nil
+	})
+}
+
+// awardSnapshotIfLoaded returns the award snapshot ONLY if one is already built
+// and current. Never builds one: the caller is a background convenience, and
+// reading the whole logbook for it is the cost this file exists to avoid.
+func (a *App) awardSnapshotIfLoaded() []qso.QSO {
+	rev, err := a.qso.Revision(a.ctx)
+	if err != nil {
+		return nil
+	}
+	a.awardSnapMu.Lock()
+	defer a.awardSnapMu.Unlock()
+	if a.awardSnap != nil && a.awardSnapRev == rev {
+		return a.awardSnap
+	}
+	return nil
+}
+
+// noteWorkedQSO folds a just-logged contact's references into the built sets, so
+// logging does not throw away work already done.
+func (a *App) noteWorkedQSO(q qso.QSO) {
+	a.workedRefMu.Lock()
+	codes := make(map[string]bool, len(a.workedRef.byCode))
+	for c := range a.workedRef.byCode {
+		codes[c] = true
+	}
+	a.workedRefMu.Unlock()
+	if len(codes) == 0 {
+		return
+	}
+	rev, err := a.qso.Revision(a.ctx)
+	if err != nil {
+		return
+	}
+	a.enrichQSOForAwards(&q)
+	found := map[string][]string{}
+	for _, d := range a.awardDefs() {
+		code := strings.ToUpper(d.Code)
+		if !codes[code] {
+			continue
+		}
+		metas := a.awardRefMetas([]award.Def{d})[code]
+		for _, r := range award.MatchQSO(d, metas, &q) {
+			found[code] = append(found[code], strings.ToUpper(strings.TrimSpace(r)))
+		}
+	}
+	a.workedRefMu.Lock()
+	defer a.workedRefMu.Unlock()
+	// Carry the sets forward to the new revision rather than dropping them: they
+	// were correct one contact ago, and that contact is what is being added.
+	a.workedRef.rev = rev
+	for code, refs := range found {
+		if set := a.workedRef.byCode[code]; set != nil {
+			for _, r := range refs {
+				set[r] = struct{}{}
+			}
+		}
+	}
+}
+
+// invalidateWorkedRefs drops every set. For the changes a revision cannot see —
+// award definitions edited, reference lists updated, QSLs confirmed.
+func (a *App) invalidateWorkedRefs() {
+	a.workedRefMu.Lock()
+	a.workedRef = workedRefIndex{}
+	a.workedRefMu.Unlock()
+}

awardnew_test.go

@@ -0,0 +1,22 @@
+package main
+
+import "testing"
+
+func TestSplitRefEntry(t *testing.T) {
+	code, ref, ok := splitRefEntry("rda@st-25")
+	if !ok || code != "RDA" || ref != "ST-25" {
+		t.Fatalf("got %q %q %v", code, ref, ok)
+	}
+	// The picker writes what the operator typed, spacing included.
+	if _, ref, _ = splitRefEntry("POTA@ fr-1234 "); ref != "FR-1234" {
+		t.Fatalf("not trimmed: %q", ref)
+	}
+	// A reference can contain the separator characters of a label; only the
+	// FIRST @ splits, so "IOTA@EU-064" survives and a stray one does not create
+	// an award out of nothing.
+	for _, bad := range []string{"", "RDA", "@ST-25", "RDA@", "RDA@  "} {
+		if _, _, ok := splitRefEntry(bad); ok {
+			t.Fatalf("%q accepted", bad)
+		}
+	}
+}

awardrelabel_test.go

@@ -0,0 +1,65 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/award"
+)
+
+// relabelOnly decides whether a save can take the cheap path. A wrong "yes"
+// leaves stale references in the log, so every case that is not purely a
+// display change must fall through to the full recompute.
+func TestRelabelOnly(t *testing.T) {
+	base := []award.Def{
+		{Code: "DDFM", Field: "note", RefDisplay: "ref", Valid: true},
+		{Code: "IOTA", Field: "iota", RefDisplay: "", Valid: true},
+	}
+	cp := func() []award.Def { out := make([]award.Def, len(base)); copy(out, base); return out }
+
+	// The case this exists for: one award's column switches to the description.
+	next := cp()
+	next[0].RefDisplay = "name"
+	codes, ok := relabelOnly(base, next)
+	if !ok || len(codes) != 1 || codes[0] != "DDFM" {
+		t.Errorf("display-only change = (%v, %v), want ([DDFM], true)", codes, ok)
+	}
+
+	// Two at once is still a relabel.
+	next = cp()
+	next[0].RefDisplay = "both"
+	next[1].RefDisplay = "name"
+	if codes, ok := relabelOnly(base, next); !ok || len(codes) != 2 {
+		t.Errorf("two display changes = (%v, %v), want two codes", codes, ok)
+	}
+
+	// Nothing changed: no relabel to do, and no full recompute claimed either.
+	if codes, ok := relabelOnly(base, cp()); ok || codes != nil {
+		t.Errorf("identical definitions must not report a relabel, got (%v, %v)", codes, ok)
+	}
+
+	// Anything that can change WHICH QSOs match must fail the test.
+	for name, mutate := range map[string]func([]award.Def){
+		"field":     func(d []award.Def) { d[0].Field = "comment" },
+		"pattern":   func(d []award.Def) { d[0].Pattern = `\d{2}` },
+		"exact":     func(d []award.Def) { d[0].ExactMatch = true },
+		"validity":  func(d []award.Def) { d[0].ValidFrom = "2020-01-01" },
+		"dxcc":      func(d []award.Def) { d[0].DXCCFilter = []int{227} },
+		"disabled":  func(d []award.Def) { d[0].Valid = false },
+		"or rule":   func(d []award.Def) { d[0].OrRules = []award.OrRule{{Field: "qth"}} },
+		"with disp": func(d []award.Def) { d[0].RefDisplay = "name"; d[0].Field = "comment" },
+	} {
+		n := cp()
+		mutate(n)
+		if _, ok := relabelOnly(base, n); ok {
+			t.Errorf("%s: took the relabel path — stale references would stay in the log", name)
+		}
+	}
+
+	// An award added or removed changes the set, never a relabel.
+	if _, ok := relabelOnly(base, append(cp(), award.Def{Code: "WWFF"})); ok {
+		t.Errorf("an added award must force a full recompute")
+	}
+	if _, ok := relabelOnly(base, cp()[:1]); ok {
+		t.Errorf("a removed award must force a full recompute")
+	}
+}

awardsnap_test.go

@@ -0,0 +1,84 @@
+package main
+
+import (
+	"sync"
+	"testing"
+	"time"
+)
+
+// The award snapshot must be built ONCE however many callers ask at once.
+//
+// The cache lock is released before the logbook is read, so every caller that
+// arrives during a build used to miss the cache and start its own. Opening the
+// Awards panel does exactly that: a field log showed three pulls of the same
+// 123 615 QSOs inside ten seconds, and three copies alive together took the Go
+// heap from 725 MB to 2.5 GB.
+//
+// This models the same shape — a cheap cache check, a slow build, a shared
+// result — against the pattern awardSnapshot now uses, so the invariant is
+// pinned without needing a logbook.
+func TestSnapshotBuildsOncePerRevision(t *testing.T) {
+	var (
+		cacheMu sync.Mutex
+		buildMu sync.Mutex
+		cached  []int
+		rev     = "r1"
+		gotRev  string
+		builds  int
+	)
+
+	get := func() []int {
+		cacheMu.Lock()
+		if cached != nil && gotRev == rev {
+			defer cacheMu.Unlock()
+			return cached
+		}
+		cacheMu.Unlock()
+
+		buildMu.Lock()
+		defer buildMu.Unlock()
+		// Re-check: whoever held the build lock has just finished.
+		cacheMu.Lock()
+		if cached != nil && gotRev == rev {
+			defer cacheMu.Unlock()
+			return cached
+		}
+		cacheMu.Unlock()
+
+		time.Sleep(50 * time.Millisecond) // the logbook read
+		out := []int{1, 2, 3}
+
+		cacheMu.Lock()
+		builds++
+		cached, gotRev = out, rev
+		cacheMu.Unlock()
+		return out
+	}
+
+	var wg sync.WaitGroup
+	results := make([][]int, 8)
+	for i := range results {
+		wg.Add(1)
+		go func(i int) { defer wg.Done(); results[i] = get() }(i)
+	}
+	wg.Wait()
+
+	if builds != 1 {
+		t.Errorf("%d builds for one revision — each concurrent caller pulled the whole logbook again", builds)
+	}
+	for i, r := range results {
+		if len(r) != 3 {
+			t.Errorf("caller %d got %v", i, r)
+		}
+	}
+
+	// A new revision must rebuild: the guard is against duplicate work, not
+	// against a logbook that changed.
+	cacheMu.Lock()
+	rev = "r2"
+	cacheMu.Unlock()
+	get()
+	if builds != 2 {
+		t.Errorf("builds = %d after the revision moved, want 2 — a changed logbook must be re-read", builds)
+	}
+}

bandchange_test.go

@@ -0,0 +1,36 @@
+package main
+
+import "testing"
+
+// A band change now has two sources: the rig, and the entry strip on a station
+// whose rig OpsLog does not control. They share one memory of the last band, so
+// a station that has both commands its antenna switch once per QSY rather than
+// twice — the entry selector pushes a QSY, the rig reports the same band back,
+// and only the first of the two is a change.
+func TestBandChangeIsNotedOncePerBand(t *testing.T) {
+	lastTriggerBandMu.Lock()
+	lastTriggerBand = ""
+	lastTriggerBandMu.Unlock()
+
+	if b, changed := noteBandChange("20m"); !changed || b != "20m" {
+		t.Fatalf("first 20m = (%q,%v), want (\"20m\",true)", b, changed)
+	}
+	// The same band from the other source — the rig echoing the QSY back.
+	if _, changed := noteBandChange("20M"); changed {
+		t.Error("the rig echoing the band back counted as a second change — the switch would be commanded twice")
+	}
+	if _, changed := noteBandChange(" 20m "); changed {
+		t.Error("whitespace made the same band look new")
+	}
+	if b, changed := noteBandChange("40m"); !changed || b != "40m" {
+		t.Errorf("40m = (%q,%v), want (\"40m\",true)", b, changed)
+	}
+	// An unknown band must not be recorded, or the next real one would look
+	// unchanged against it.
+	if _, changed := noteBandChange(""); changed {
+		t.Error("an empty band was treated as a change")
+	}
+	if _, changed := noteBandChange("40m"); changed {
+		t.Error("the empty band overwrote the last one")
+	}
+}

bandopen_nearkm_test.go

@@ -0,0 +1,37 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/pskr"
+)
+
+// The receiver radius is what makes an opening report evidence about the
+// OPERATOR's path rather than someone else's. Both ends of the range destroy
+// that: too small and no receiver is ever near enough, too large and the
+// reports are about a different part of the world. A stored value that would do
+// either has to fall back rather than be honoured.
+func TestBandOpenNearKmClamps(t *testing.T) {
+	for _, tc := range []struct {
+		name string
+		raw  string
+		want int
+	}{
+		{"unset falls back", "", pskr.DefaultNearKm},
+		{"not a number falls back", "soon", pskr.DefaultNearKm},
+		{"zero falls back", "0", pskr.DefaultNearKm},
+		{"negative falls back", "-100", pskr.DefaultNearKm},
+		{"absurdly tight falls back", "5", pskr.DefaultNearKm},
+		{"absurdly wide falls back", "5000", pskr.DefaultNearKm},
+		{"a real choice is kept", "100", 100},
+		{"the lower bound is kept", "25", 25},
+		{"the upper bound is kept", "1000", 1000},
+		{"surrounding space is ignored", "  150 ", 150},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			if got := bandOpenNearKm(tc.raw); got != tc.want {
+				t.Errorf("bandOpenNearKm(%q) = %d, want %d", tc.raw, got, tc.want)
+			}
+		})
+	}
+}

bandopen_sources.go

@@ -0,0 +1,299 @@
+package main
+
+// The data sources band-opening detection depends on, and the settings that
+// switch them on.
+//
+// The detection shipped reading whatever the operator's cluster nodes happened
+// to carry. That was a design mistake of the worst kind: the feature depended
+// on RBN feeds and a PSK Reporter subscription that nobody could know were
+// needed, so it looked broken rather than unconfigured. Nexus showed a 6 m
+// opening with 869 stations while OpsLog, on the same PC, showed nothing.
+//
+// So enabling the watch ARRANGES ITS OWN SOURCES: it adds the two RBN nodes if
+// they are missing and brings the PSK Reporter feed up. Turning it off leaves
+// the nodes alone — they may have been wanted for their own sake, and silently
+// removing a cluster node an operator is using would be worse than leaving one
+// they no longer need.
+
+import (
+	"strconv"
+	"strings"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/bandopen"
+	"hamlog/internal/cluster"
+	"hamlog/internal/geo"
+	"hamlog/internal/gridcache"
+	"hamlog/internal/pskr"
+)
+
+const (
+	keyBandOpenEnabled = "bandopen.enabled"
+	keyBandOpenBands   = "bandopen.bands"  // comma-separated; empty = the default set
+	keyBandOpenNearKm  = "bandopen.nearkm" // receiver radius; empty = pskr.DefaultNearKm
+)
+
+// rbnNodes are the two Reverse Beacon Network endpoints the watch wants: CW and
+// digital are separate ports and carry different skimmers.
+var rbnNodes = []cluster.ServerConfig{
+	{Name: "RBN CW", Host: "telnet.reversebeacon.net", Port: 7000, Enabled: true},
+	{Name: "RBN FTx", Host: "telnet.reversebeacon.net", Port: 7001, Enabled: true},
+}
+
+// BandOpenSettings is the panel's shape.
+type BandOpenSettings struct {
+	Enabled bool     `json:"enabled"`
+	Bands   []string `json:"bands"`
+	// Available is every band that can be watched, so the UI does not carry its
+	// own copy of a list that belongs to the detector.
+	Available []string `json:"available"`
+	// NearKm is how close a RECEIVER has to be for its report to count as
+	// evidence about the operator's own path. An opening on these bands reaches
+	// an AREA, and the right radius is a judgement about how big that area is —
+	// a 2 m tropo duct is not a 10 m Es footprint — so it is the operator's to
+	// make rather than a constant.
+	//
+	// Tightening it costs nothing in traffic: the broker subscription is one
+	// ring of squares whatever this says, and this only decides what survives
+	// once the messages are here. It costs SENSITIVITY — too small a radius in a
+	// thinly-populated region leaves no receivers at all, and a watch with
+	// nothing to look at reports nothing while appearing to work.
+	NearKm int `json:"near_km"`
+}
+
+func (a *App) GetBandOpenSettings() BandOpenSettings {
+	s := BandOpenSettings{
+		Enabled:   a.settingOr(keyBandOpenEnabled, "") == "1",
+		Bands:     splitCSV(a.settingOr(keyBandOpenBands, "")),
+		Available: pskr.Bands,
+		NearKm:    bandOpenNearKm(a.settingOr(keyBandOpenNearKm, "")),
+	}
+	// Keep only bands that are still offered. A saved selection outlives the code
+	// that made it: 12 m was dropped from the watched set, but every operator who
+	// had already enabled the watch kept subscribing to it — paying for a firehose
+	// whose messages the detector then threw away.
+	s.Bands = keepKnownBands(s.Bands)
+	if len(s.Bands) == 0 {
+		s.Bands = append(s.Bands, pskr.Bands...)
+	}
+	return s
+}
+
+func keepKnownBands(want []string) []string {
+	ok := make(map[string]bool, len(pskr.Bands))
+	for _, b := range pskr.Bands {
+		ok[b] = true
+	}
+	out := make([]string, 0, len(want))
+	for _, b := range want {
+		if ok[strings.ToLower(strings.TrimSpace(b))] {
+			out = append(out, b)
+		}
+	}
+	return out
+}
+
+// bandOpenNearKm reads the stored receiver radius, falling back to the default
+// for anything unset or out of range. The bounds are the two ways to make the
+// watch useless: below 25 km almost nobody is ever near enough to hear anything,
+// and past 1000 km the reports stop being about the operator's own path — which
+// is the entire premise of measuring from a receiver rather than a transmitter.
+func bandOpenNearKm(raw string) int {
+	n, err := strconv.Atoi(strings.TrimSpace(raw))
+	if err != nil || n < 25 || n > 1000 {
+		return pskr.DefaultNearKm
+	}
+	return n
+}
+
+func (a *App) SaveBandOpenSettings(s BandOpenSettings) error {
+	a.setSetting(keyBandOpenEnabled, map[bool]string{true: "1", false: "0"}[s.Enabled])
+	a.setSetting(keyBandOpenBands, strings.Join(s.Bands, ","))
+	a.setSetting(keyBandOpenNearKm, strconv.Itoa(bandOpenNearKm(strconv.Itoa(s.NearKm))))
+	if s.Enabled {
+		a.ensureRBNNodes()
+	}
+	a.startBandOpenFeed()
+	return nil
+}
+
+// ensureRBNNodes adds the RBN endpoints when they are absent.
+//
+// Matched on host AND port rather than on name: an operator who renamed theirs
+// "Skimmers CW" has the node, and adding a second one pointed at the same
+// server would give them every spot twice — which the detector would read as
+// twice as many stations, i.e. an opening that is not there.
+func (a *App) ensureRBNNodes() {
+	have, err := a.ListClusterServers()
+	if err != nil {
+		applog.Printf("bandopen: cannot read the cluster nodes (%v) — not adding RBN", err)
+		return
+	}
+	for _, want := range rbnNodes {
+		found := false
+		for _, h := range have {
+			if strings.EqualFold(strings.TrimSpace(h.Host), want.Host) && h.Port == want.Port {
+				found = true
+				break
+			}
+		}
+		if found {
+			continue
+		}
+		if _, err := a.SaveClusterServer(want); err != nil {
+			applog.Printf("bandopen: could not add %s: %v", want.Name, err)
+			continue
+		}
+		applog.Printf("bandopen: added cluster node %s (%s:%d) — the watch needs it",
+			want.Name, want.Host, want.Port)
+	}
+}
+
+// startBandOpenFeed brings the PSK Reporter subscription up or down to match
+// the setting. Called at startup and whenever the setting is saved.
+func (a *App) startBandOpenFeed() {
+	if a.pskr != nil {
+		a.pskr.Stop()
+		a.pskr = nil
+	}
+	s := a.GetBandOpenSettings()
+	a.bandOpen.on.Store(s.Enabled)
+	a.setBandOpenBands(s.Bands)
+	if !s.Enabled {
+		// Put out whatever is currently lit. Leaving the badges up would keep
+		// announcing an opening from a watch that is now off, and they only fade
+		// on a timer fed by spots this path no longer looks at — so they would
+		// hang there until the app restarted.
+		a.clearBandOpenings()
+	}
+	chaseGrids := a.gridStore != nil
+	chaseNew := a.chaseNewEnabled()
+	// Three consumers, one feed. Any one of them is reason enough to bring it up,
+	// and turning one off must not cut the others loose.
+	if !s.Enabled && !chaseGrids && !chaseNew {
+		return
+	}
+	// Every spot is measured from the operator's position. Without one there is
+	// nothing to measure, and a detector fed unmeasurable spots reports nothing
+	// while looking like it is working.
+	if !a.opSet {
+		applog.Printf("pskr: no station grid set — the feed needs one to measure a path")
+		return
+	}
+
+	// Grid chasing and new-chasing want every band; the opening watch wants its
+	// four. "+" is the MQTT single-level wildcard, so one subscription per square
+	// covers the lot.
+	bands := s.Bands
+	if chaseGrids || chaseNew {
+		bands = []string{"+"}
+	}
+	// Filter at the BROKER on the receiver's square rather than receiving the
+	// world and discarding it here. Measured on the live feed: the four opening
+	// bands unfiltered are 83 messages a second, of which roughly one in a
+	// hundred survived the NearKm test below. One ring of squares — about the
+	// same 300 km — is 0.2 to 1.2 a second, and the same for every operator,
+	// where filtering by DXCC ranged from 1.2 (OH) to 72.5 (K).
+	rxGrids := geo.NeighbourGrids(a.opLat, a.opLon, 1)
+
+	var onGrid func(call, grid string)
+	if chaseGrids {
+		onGrid = func(call, grid string) { a.rememberDecodeGrid(call, grid, gridcache.SourceMQTT) }
+	}
+	var onSpot func(pskr.Spot)
+	switch {
+	case s.Enabled && chaseNew:
+		onSpot = func(sp pskr.Spot) { a.feedBandOpen(sp); a.feedChaseNew(sp) }
+	case s.Enabled:
+		onSpot = a.feedBandOpen
+	case chaseNew:
+		onSpot = a.feedChaseNew
+	}
+
+	a.pskr = pskr.New(pskr.Config{
+		Bands:   bands,
+		RxGrids: rxGrids,
+		NearKm:  s.NearKm,
+		OpLat:   a.opLat, OpLon: a.opLon,
+		Geo: func(grid string) (int, int, bool) {
+			lat, lon, ok := gridToLatLon(grid)
+			if !ok {
+				return 0, 0, false
+			}
+			// The same arithmetic the cluster path uses, so one spot cannot be
+			// 2000 km away down one road and 2100 km down the other.
+			d := int(haversineKm(a.opLat, a.opLon, lat, lon) + 0.5)
+			b := int(initialBearingDeg(a.opLat, a.opLon, lat, lon) + 0.5)
+			return d, b, true
+		},
+		OnSpot: onSpot,
+		OnGrid: onGrid,
+		Logf:   applog.Printf,
+	})
+	if err := a.pskr.Start(); err != nil {
+		applog.Printf("pskr: feed did not start: %v", err)
+		return
+	}
+	applog.Printf("pskr: feed up — bands %v, %d receiver squares (openings=%v, grids=%v, chase-new=%v)",
+		bands, len(rxGrids), s.Enabled, chaseGrids, chaseNew)
+}
+
+// feedBandOpen hands one PSK Reporter decode to the detector.
+//
+// Called from the MQTT goroutine at up to thousands a minute when 6 m is open,
+// so it does the least possible: the detector's own window and de-duplication
+// by callsign are what turn that flood into one announcement.
+func (a *App) feedBandOpen(s pskr.Spot) {
+	if !a.bandOpenWanted(s.Band) {
+		return
+	}
+	a.bandOpen.mu.Lock()
+	if a.bandOpen.det == nil {
+		a.bandOpen.det = bandopen.New(bandopen.DefaultConfig())
+	}
+	op := a.bandOpen.det.Add(bandopen.Spot{
+		Call: s.Call, Band: s.Band, DistKm: s.DistKm, Bearing: s.Bearing, At: s.At,
+	}, a.opLat)
+	if op != nil {
+		a.rememberOpening(*op)
+	}
+	if s.DistKm >= bandopen.DefaultConfig().MinKm {
+		a.markBandAlive(s.Band, s.At)
+	}
+	a.bandOpen.mu.Unlock()
+	if op != nil {
+		a.announceOpening(*op)
+	}
+}
+
+// GetPSKReporterStatus is what the settings panel polls.
+func (a *App) GetPSKReporterStatus() pskr.Status {
+	if a.pskr == nil {
+		return pskr.Status{Bands: pskr.Bands}
+	}
+	return a.pskr.Status()
+}
+
+// settingOr reads one key, falling back when the store is not up yet or the
+// value is blank. The settings store is a plain string key/value and every
+// caller does this by hand; two of them here earn the helper.
+func (a *App) settingOr(key, def string) string {
+	if a.settings == nil {
+		return def
+	}
+	v, _ := a.settings.Get(a.ctx, key)
+	if strings.TrimSpace(v) == "" {
+		return def
+	}
+	return v
+}
+
+func splitCSV(s string) []string {
+	var out []string
+	for _, p := range strings.Split(s, ",") {
+		if p = strings.TrimSpace(p); p != "" {
+			out = append(out, p)
+		}
+	}
+	return out
+}

bandopening.go

@@ -0,0 +1,230 @@
+package main
+
+// Band-opening announcements — the app-side glue for internal/bandopen.
+//
+// The detector needs nothing OpsLog does not already compute: the cluster event
+// worker enriches every spot with the great-circle distance and bearing from
+// the operator's grid before this is called. So watching for sporadic E costs
+// one function call per spot and no new data source.
+
+import (
+	"fmt"
+	"strings"
+	"sync"
+	"sync/atomic"
+	"time"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/bandopen"
+	"hamlog/internal/cluster"
+
+	wruntime "github.com/wailsapp/wails/v2/pkg/runtime"
+)
+
+type bandOpenState struct {
+	// on mirrors the "Watch for band openings" setting.
+	//
+	// Cached rather than read per spot: this is the cluster hot path, where a
+	// settings query per spot is exactly what the rest of this file avoids.
+	// startBandOpenFeed owns it — it runs at startup and again on every save, so
+	// the switch takes effect without a restart.
+	on atomic.Bool
+	// bands is the operator's SELECTED set, held as map[string]bool.
+	//
+	// bandopen.Watched only says which bands the detector is capable of; it
+	// knows nothing about the chips in Settings. Nothing checked the selection
+	// on either feed path, so unticking 10 m and 2 m changed the subscription and
+	// left the cluster path announcing them anyway.
+	bands atomic.Value
+	mu    sync.Mutex
+	det  *bandopen.Detector
+	last []bandopen.Opening // most recent first, for the UI
+	// live holds the announced openings that are still going, keyed by band, and
+	// aliveUntil says when each stops counting as current.
+	//
+	// The detector announces an opening ONCE and then goes quiet for 45 minutes,
+	// which is right for a message but useless for a badge that has to stay lit
+	// while the band is open and go out when it closes. Nothing tells us an
+	// opening ended, so it is inferred: every qualifying spot on that band pushes
+	// the deadline out, and when they stop arriving the badge fades by itself.
+	live       map[string]bandopen.Opening
+	aliveUntil map[string]time.Time
+}
+
+// openingIdle is how long a band may go without a qualifying spot before its
+// badge goes out. Longer than the detector's own 12-minute window, so a quiet
+// couple of minutes mid-opening does not blink the badge off and on again.
+const openingIdle = 15 * time.Minute
+
+const maxRememberedOpenings = 20
+
+// detectBandOpening feeds one spot to the detector and announces a hit.
+func (a *App) detectBandOpening(s cluster.Spot) {
+	// The watch has to be switched on.
+	//
+	// It was not checked here at all: the setting only ever governed the extra
+	// DATA SOURCES (the RBN nodes and the PSK Reporter feed), while the detector
+	// itself ran on every ordinary cluster spot. So an operator who had never
+	// enabled the watch still got opening banners, from a feature they had
+	// deliberately left off.
+	if !a.bandOpen.on.Load() || !a.bandOpenWanted(s.Band) {
+		return
+	}
+	// No operator grid = no distance and no bearing on the spot, and the whole
+	// detection rests on those two. Say nothing rather than guess.
+	if !a.opSet || s.DistanceKm <= 0 || !bandopen.Watched(s.Band) {
+		return
+	}
+	a.bandOpen.mu.Lock()
+	if a.bandOpen.det == nil {
+		a.bandOpen.det = bandopen.New(bandopen.DefaultConfig())
+	}
+	op := a.bandOpen.det.Add(bandopen.Spot{
+		Call: s.DXCall, Band: s.Band, DistKm: s.DistanceKm,
+		Bearing: s.ShortPath, At: s.ReceivedAt,
+	}, a.opLat)
+	if op != nil {
+		a.rememberOpening(*op)
+	}
+	// Keeps a lit badge lit. Gated on the same floor the detector uses, or a
+	// band busy with short-range tropo would hold an Es badge on for ever.
+	if s.DistanceKm >= bandopen.DefaultConfig().MinKm {
+		a.markBandAlive(s.Band, s.ReceivedAt)
+	}
+	a.bandOpen.mu.Unlock()
+	if op != nil {
+		a.announceOpening(*op)
+	}
+}
+
+// markBandAlive pushes a band's badge deadline out. Called for every spot the
+// detector accepted, from either feed. Cheap on purpose: this runs on the MQTT
+// goroutine at thousands a minute when 6 m is open.
+//
+// Caller holds bandOpen.mu.
+func (a *App) markBandAlive(band string, at time.Time) {
+	if _, lit := a.bandOpen.live[strings.ToLower(band)]; !lit {
+		return // nothing announced for this band, nothing to keep alive
+	}
+	if a.bandOpen.aliveUntil == nil {
+		a.bandOpen.aliveUntil = map[string]time.Time{}
+	}
+	a.bandOpen.aliveUntil[strings.ToLower(band)] = at.Add(openingIdle)
+}
+
+// rememberOpening files a detection and lights its badge. Caller holds the mutex.
+func (a *App) rememberOpening(op bandopen.Opening) {
+	a.bandOpen.last = append([]bandopen.Opening{op}, a.bandOpen.last...)
+	if len(a.bandOpen.last) > maxRememberedOpenings {
+		a.bandOpen.last = a.bandOpen.last[:maxRememberedOpenings]
+	}
+	if a.bandOpen.live == nil {
+		a.bandOpen.live = map[string]bandopen.Opening{}
+		a.bandOpen.aliveUntil = map[string]time.Time{}
+	}
+	b := strings.ToLower(op.Band)
+	a.bandOpen.live[b] = op
+	a.bandOpen.aliveUntil[b] = op.At.Add(openingIdle)
+}
+
+// GetLiveOpenings returns the openings still under way, for the status-bar
+// badge. Expired ones are dropped as they are noticed — there is no janitor for
+// something that holds at most five entries.
+func (a *App) GetLiveOpenings() []bandopen.Opening {
+	now := time.Now()
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	out := make([]bandopen.Opening, 0, len(a.bandOpen.live))
+	for b, op := range a.bandOpen.live {
+		if until, ok := a.bandOpen.aliveUntil[b]; !ok || now.After(until) {
+			delete(a.bandOpen.live, b)
+			delete(a.bandOpen.aliveUntil, b)
+			applog.Printf("bandopen: %s opening has gone quiet", strings.ToUpper(b))
+			continue
+		}
+		out = append(out, op)
+	}
+	return out
+}
+
+// bandOpenWanted reports whether the operator has this band ticked. Falls back
+// to the detector's own set until a selection has been stored, so a band is
+// never silently dropped before the settings have been read.
+func (a *App) bandOpenWanted(band string) bool {
+	if !bandopen.Watched(band) {
+		return false
+	}
+	sel, ok := a.bandOpen.bands.Load().(map[string]bool)
+	if !ok || len(sel) == 0 {
+		return true
+	}
+	return sel[strings.ToLower(strings.TrimSpace(band))]
+}
+
+// setBandOpenBands records the selection and puts out badges for bands that
+// have just been unticked — they fade on a timer fed by spots the detector no
+// longer looks at, so they would otherwise stay lit until the next restart.
+func (a *App) setBandOpenBands(bands []string) {
+	sel := make(map[string]bool, len(bands))
+	for _, b := range bands {
+		sel[strings.ToLower(strings.TrimSpace(b))] = true
+	}
+	a.bandOpen.bands.Store(sel)
+
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	for b := range a.bandOpen.live {
+		if len(sel) > 0 && !sel[b] {
+			delete(a.bandOpen.live, b)
+			delete(a.bandOpen.aliveUntil, b)
+			applog.Printf("bandopen: %s is no longer watched — badge cleared", strings.ToUpper(b))
+		}
+	}
+}
+
+// clearBandOpenings puts out every lit badge and forgets the detector's window.
+// Called when the watch is switched off: the badges fade on a timer fed by
+// spots the detector no longer looks at, so without this they would stay up
+// until the next restart. The remembered list is left alone — those openings
+// really did happen, and the operator may still want to see what he missed.
+func (a *App) clearBandOpenings() {
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	a.bandOpen.live = nil
+	a.bandOpen.aliveUntil = nil
+	// Drop the accumulated spot window too, so switching the watch back on starts
+	// from what is on the air now rather than from an hour-old burst.
+	a.bandOpen.det = nil
+}
+
+// announceOpening logs and pushes one detection. Shared by both feeds — the
+// cluster path here and the PSK Reporter path in bandopen_sources.go — so an
+// opening reads the same however it was noticed.
+func (a *App) announceOpening(op bandopen.Opening) {
+	applog.Printf("bandopen: %s opening — %d stations, ~%d km, %s%s (%s)",
+		op.Band, op.Calls, op.MedianKm, op.Sector(),
+		map[bool]string{true: "", false: " — UNUSUAL for the season"}[op.InSeason],
+		strings.Join(op.Examples, " "))
+	if a.ctx != nil {
+		wruntime.EventsEmit(a.ctx, "bandopen:detected", op)
+	}
+}
+
+// GetBandOpenings returns the openings seen this session, newest first. The UI
+// polls this so a detection is still visible after its toast has gone.
+func (a *App) GetBandOpenings() []bandopen.Opening {
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	out := make([]bandopen.Opening, len(a.bandOpen.last))
+	copy(out, a.bandOpen.last)
+	return out
+}
+
+// BandOpeningSummary is the one-line form used in the toast and the log.
+func BandOpeningSummary(o bandopen.Opening) string {
+	s := fmt.Sprintf("%s open — %d stations ~%d km, %s", strings.ToUpper(o.Band), o.Calls, o.MedianKm, o.Sector())
+	if !o.InSeason {
+		s += " (unusual for the season)"
+	}
+	return s
+}

bandopening_gate_test.go

@@ -0,0 +1,118 @@
+package main
+
+import (
+	"testing"
+	"time"
+
+	"hamlog/internal/bandopen"
+	"hamlog/internal/cluster"
+)
+
+// The "Watch for band openings" switch has to gate the DETECTOR, not just the
+// extra data sources.
+//
+// It originally governed only the RBN nodes and the PSK Reporter feed, while
+// the detector itself ran on every ordinary cluster spot — so an operator who
+// had never enabled the watch still got opening banners for a feature he had
+// deliberately left off. That is what this pins.
+func TestBandOpenWatchGatesTheDetector(t *testing.T) {
+	spot := func() cluster.Spot {
+		return cluster.Spot{
+			DXCall: "EA1ABC", Band: "6m", DistanceKm: 1400, ShortPath: 210,
+			ReceivedAt: time.Now(),
+		}
+	}
+
+	// Switched off: the spot must not even reach the detector.
+	off := &App{opSet: true, opLat: 48.0, opLon: 2.0}
+	off.detectBandOpening(spot())
+	if off.bandOpen.det != nil {
+		t.Error("the detector ran with the watch switched off")
+	}
+
+	// Switched on: the same spot is accepted (one spot is not an opening, so
+	// nothing is announced — but the detector now exists and is collecting).
+	on := &App{opSet: true, opLat: 48.0, opLon: 2.0}
+	on.bandOpen.on.Store(true)
+	on.detectBandOpening(spot())
+	if on.bandOpen.det == nil {
+		t.Error("the detector did not run with the watch switched on")
+	}
+}
+
+// Switching the watch off must put the badges out. They fade on a timer fed by
+// spots the detector no longer looks at, so left alone they would stay lit
+// until the next restart.
+func TestClearBandOpeningsPutsTheBadgesOut(t *testing.T) {
+	a := &App{}
+	a.bandOpen.live = map[string]bandopen.Opening{"6m": {Band: "6m", Calls: 9}}
+	a.bandOpen.aliveUntil = map[string]time.Time{"6m": time.Now().Add(time.Hour)}
+	a.bandOpen.det = bandopen.New(bandopen.DefaultConfig())
+	a.bandOpen.last = []bandopen.Opening{{Band: "6m", Calls: 9}}
+
+	a.clearBandOpenings()
+
+	if got := a.GetLiveOpenings(); len(got) != 0 {
+		t.Errorf("a badge stayed lit after the watch was switched off: %v", got)
+	}
+	if a.bandOpen.det != nil {
+		t.Error("the accumulated spot window survived — switching back on would start from a stale burst")
+	}
+	// The history is NOT cleared: those openings really happened.
+	if len(a.GetBandOpenings()) != 1 {
+		t.Error("the remembered openings were thrown away")
+	}
+}
+
+// Unticking a band in Settings must actually stop its announcements.
+//
+// Nothing checked the operator's selection on either feed path: bandopen.Watched
+// only says which bands the detector is CAPABLE of. So a station with just 6 m
+// ticked still got 10 m and 2 m badges, from the cluster path and — once grid
+// chasing widened the subscription to every band — from PSK Reporter too.
+func TestBandOpenHonoursTheSelectedBands(t *testing.T) {
+	a := &App{opSet: true, opLat: 48, opLon: 2}
+	a.bandOpen.on.Store(true)
+	a.setBandOpenBands([]string{"6m"})
+
+	if !a.bandOpenWanted("6m") {
+		t.Error("6m is ticked and was refused")
+	}
+	for _, b := range []string{"10m", "2m", "4m"} {
+		if a.bandOpenWanted(b) {
+			t.Errorf("%s is not ticked and was accepted", b)
+		}
+	}
+	// A band the detector cannot watch at all stays out whatever is stored.
+	if a.bandOpenWanted("20m") {
+		t.Error("20m is not a watched band and was accepted")
+	}
+
+	// And the cluster path must obey it too.
+	a.detectBandOpening(cluster.Spot{
+		DXCall: "K1ABC", Band: "10m", DistanceKm: 6000, ShortPath: 280, ReceivedAt: time.Now(),
+	})
+	if a.bandOpen.det != nil {
+		t.Error("a spot on an unticked band reached the detector")
+	}
+}
+
+// Unticking a band puts its badge out. They fade on a timer fed by spots the
+// detector no longer looks at, so it would otherwise stay lit until a restart.
+func TestUntickingABandClearsItsBadge(t *testing.T) {
+	a := &App{}
+	a.bandOpen.live = map[string]bandopen.Opening{
+		"6m":  {Band: "6m", Calls: 9},
+		"10m": {Band: "10m", Calls: 5},
+	}
+	a.bandOpen.aliveUntil = map[string]time.Time{
+		"6m":  time.Now().Add(time.Hour),
+		"10m": time.Now().Add(time.Hour),
+	}
+	a.setBandOpenBands([]string{"6m"})
+
+	live := a.GetLiveOpenings()
+	if len(live) != 1 || live[0].Band != "6m" {
+		t.Errorf("live openings = %v, want only 6m", live)
+	}
+}

bulkfields_test.go

@@ -0,0 +1,35 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// A bulk-editable field passes through THREE tables: the field list in the UI,
+// bulkFieldColumns here, and bulkEditableCols in internal/qso. Mode and RST were
+// added to the first and the third and not the second, so the dialog offered
+// them and the save failed with "unknown field" — reported from the field.
+//
+// Nothing warns about that: each table is valid on its own. This is the check.
+func TestEveryMappedBulkFieldIsWhitelisted(t *testing.T) {
+	for id, col := range bulkFieldColumns {
+		if !qso.BulkEditable(col) {
+			t.Errorf("bulk field %q maps to column %q, which internal/qso refuses to write", id, col)
+		}
+	}
+}
+
+// And the reverse: a column the qso layer allows but nothing maps to is dead
+// weight — it looks supported from the inside and cannot be reached from outside.
+func TestNoUnreachableBulkColumn(t *testing.T) {
+	mapped := map[string]bool{}
+	for _, col := range bulkFieldColumns {
+		mapped[col] = true
+	}
+	for _, col := range qso.BulkEditableColumns() {
+		if !mapped[col] {
+			t.Errorf("column %q is bulk-writable but no field maps to it — unreachable", col)
+		}
+	}
+}

catlinksig_test.go

@@ -0,0 +1,73 @@
+package main
+
+import "testing"
+
+// The whole point of the signature is that pressing Save in Preferences must
+// not drop the rig — and with it every WSJT-X/JTDX client of the shared CAT
+// server, mid-QSO, with an error box. Only a change to the LINK may reconnect.
+func TestCatLinkSigIgnoresNonLinkSettings(t *testing.T) {
+	base := CATSettings{
+		Enabled: true, Backend: "flex", FlexHost: "192.168.1.20", FlexPort: 4992,
+		PollMs: 250, DigitalDefault: "FT8",
+	}
+	same := base
+	// Everything here is applied to the RUNNING manager; none of it justifies a
+	// reconnection, and a spot option in particular must not wipe the panadapter
+	// (a Flex reconnect clears every spot on it).
+	same.PollMs = 500
+	same.DelayMs = 20
+	same.OffsetOn = true
+	same.OffsetHz = 116_000_000
+	same.FlexDecodeSpots = !base.FlexDecodeSpots
+	same.FlexDecodeSecs = 300
+	same.FlexDVKDax = !base.FlexDVKDax
+	same.PTTHotkeyEnabled = true
+	same.PTTHotkey = "Pause"
+	if catLinkSig(base) != catLinkSig(same) {
+		t.Errorf("non-link settings changed the signature:\n%s\n%s", catLinkSig(base), catLinkSig(same))
+	}
+
+	// And the ones that DO describe the connection must still force a restart.
+	for name, mutate := range map[string]func(*CATSettings){
+		"backend":     func(c *CATSettings) { c.Backend = "kenwood" },
+		"flex host":   func(c *CATSettings) { c.FlexHost = "192.168.1.21" },
+		"flex port":   func(c *CATSettings) { c.FlexPort = 4993 },
+		"serial port": func(c *CATSettings) { c.Backend = "yaesu"; c.YaesuPort = "COM7" },
+		"baud":        func(c *CATSettings) { c.Backend = "yaesu"; c.YaesuBaud = 19200 },
+		"civ address": func(c *CATSettings) { c.Backend = "icom"; c.IcomAddr = 152 },
+		"disabled":    func(c *CATSettings) { c.Enabled = false },
+	} {
+		c := base
+		mutate(&c)
+		if catLinkSig(c) == catLinkSig(base) {
+			t.Errorf("%s did not change the signature — the rig would never reconnect", name)
+		}
+	}
+}
+
+// The share server is the thing WSJT-X actually holds a socket to: restarting
+// it is what produced the error box, so it has a signature of its own.
+func TestCatShareSig(t *testing.T) {
+	base := CATSettings{Enabled: true, ShareEnabled: true, ShareProto: "rigctl", SharePort: 4532}
+	other := base
+	other.FlexHost = "10.0.0.5" // a rig-link change must not restart the server
+	if catShareSig(base) != catShareSig(other) {
+		t.Errorf("a rig-link change restarted the share server")
+	}
+	moved := base
+	moved.SharePort = 4533
+	if catShareSig(base) == catShareSig(moved) {
+		t.Errorf("a new port must restart the server")
+	}
+	off := base
+	off.ShareEnabled = false
+	if catShareSig(off) != "off" || catShareSig(off) == catShareSig(base) {
+		t.Errorf("switching sharing off must be a change")
+	}
+	// CAT off means the server has nothing to serve, whatever the share fields say.
+	catOff := base
+	catOff.Enabled = false
+	if catShareSig(catOff) != "off" {
+		t.Errorf("share signature with CAT off = %q, want \"off\"", catShareSig(catOff))
+	}
+}

cmd/cntygen/main.go

@@ -9,6 +9,7 @@ import (
 	"os"
 	"sort"
 	"strings"
+	"unicode/utf8"
 
 	"hamlog/internal/award"
 )
@@ -58,6 +59,15 @@ func main() {
 	sc.Scan() // header
 	for sc.Scan() {
 		line := sc.Text()
+		// The FIPS CSV is not reliably UTF-8, and the one county whose name is
+		// not ASCII (Doña Ana, NM) came through mangled once already — it landed
+		// in the reference as "NM/DO̱AANA", a code no log could ever match,
+		// silently costing that county for every operator. Refuse the row rather
+		// than emit a broken one.
+		if !utf8.ValidString(line) {
+			fmt.Fprintf(os.Stderr, "cntygen: skipping non-UTF-8 line: %q\n", line)
+			continue
+		}
 		parts := strings.SplitN(line, ",", 3)
 		if len(parts) < 3 {
 			continue

cmd/ctzipgen/main.go

@@ -0,0 +1,203 @@
+package main
+
+// One-shot generator: emits internal/uls/ctcounty_gen.go, the Connecticut
+// ZIP → legal county table. Not part of the build.
+//
+// Why it has to exist
+// -------------------
+// internal/uls resolves a US callsign to a county through GeoNames' ZIP table.
+// The Census replaced Connecticut's eight counties with nine PLANNING REGIONS
+// as county-equivalents in 2022, and GeoNames followed: 418 of Connecticut's
+// 429 ZIPs now report "Capitol Region", "Lower Connecticut River Valley" and
+// so on. CQ's USA-CA award did not follow, callbooks did not follow, and no
+// operator's log did either — so every Connecticut station resolved to a name
+// nothing could match, showed as a new county for ever, and counted for no
+// award. Roughly 15 000 US callsigns.
+//
+// A planning region is NOT a renamed county — it is built from towns drawn
+// from several different counties — so there is no name-to-name mapping to be
+// had. The ZIP is the only handle, hence this table.
+//
+// Sources (both public, both free)
+// --------------------------------
+//	geonames  US.txt from https://download.geonames.org/export/zip/US.zip
+//	          — the ZIP list itself, and each ZIP's centroid.
+//	crosswalk https://www2.census.gov/geo/docs/maps-data/data/rel2020/
+//	          zcta520/tab20_zcta520_county20_natl.txt
+//	          — the 2020 ZCTA↔county relationship file, which predates the
+//	            change and therefore still carries the eight real counties.
+//
+// The crosswalk covers 278 of the 418 affected ZIPs. The rest are PO-box-only
+// ZIPs, which have no ZCTA at all; each is given the county of the nearest
+// resolved ZIP centroid. That is sound here because a PO-box ZIP sits inside
+// the town it serves, and Connecticut's counties are tens of kilometres across
+// — the fallback can only err on a ZIP that straddles a county line, which the
+// ZIP-to-county approach is already documented as accepting (~98%).
+//
+// Usage:
+//
+//	go run ./cmd/ctzipgen US.txt tab20_zcta520_county20_natl.txt > internal/uls/ctcounty_gen.go
+
+import (
+	"bufio"
+	"fmt"
+	"math"
+	"os"
+	"sort"
+	"strconv"
+	"strings"
+)
+
+type zipPt struct {
+	zip      string
+	lat, lon float64
+	county   string // from the crosswalk, "" if the ZIP has no ZCTA
+	geoName  string // what GeoNames says today
+}
+
+func main() {
+	if len(os.Args) < 3 {
+		fmt.Fprintln(os.Stderr, "usage: ctzipgen US.txt tab20_zcta520_county20_natl.txt")
+		os.Exit(2)
+	}
+
+	// 1. Every Connecticut ZIP, with its centroid, from GeoNames.
+	var pts []*zipPt
+	byZip := map[string]*zipPt{}
+	f, err := os.Open(os.Args[1])
+	must(err)
+	sc := bufio.NewScanner(f)
+	sc.Buffer(make([]byte, 0, 64*1024), 256*1024)
+	for sc.Scan() {
+		c := strings.Split(sc.Text(), "\t")
+		if len(c) < 11 || strings.ToUpper(strings.TrimSpace(c[4])) != "CT" {
+			continue
+		}
+		z := strings.TrimSpace(c[1])
+		if z == "" || byZip[z] != nil {
+			continue
+		}
+		p := &zipPt{zip: z, lat: atof(c[9]), lon: atof(c[10]), geoName: strings.TrimSpace(c[5])}
+		byZip[z] = p
+		pts = append(pts, p)
+	}
+	must(sc.Err())
+	f.Close()
+
+	// 2. The 2020 county for each ZCTA. A ZCTA can straddle a county line, so
+	//    keep the county holding the largest share of its land area.
+	best := map[string]float64{}
+	f2, err := os.Open(os.Args[2])
+	must(err)
+	sc2 := bufio.NewScanner(f2)
+	sc2.Buffer(make([]byte, 0, 64*1024), 1<<20)
+	sc2.Scan() // header
+	for sc2.Scan() {
+		c := strings.Split(sc2.Text(), "|")
+		if len(c) < 18 || !strings.HasPrefix(c[9], "09") {
+			continue
+		}
+		p := byZip[strings.TrimSpace(c[1])]
+		if p == nil {
+			continue
+		}
+		area := atof(c[16])
+		if p.county != "" && area <= best[p.zip] {
+			continue
+		}
+		best[p.zip] = area
+		p.county = strings.TrimSuffix(strings.TrimSpace(c[10]), " County")
+	}
+	must(sc2.Err())
+	f2.Close()
+
+	// 3. Fill the PO-box-only ZIPs from the nearest ZIP the crosswalk resolved.
+	var anchors []*zipPt
+	for _, p := range pts {
+		if p.county != "" {
+			anchors = append(anchors, p)
+		}
+	}
+	if len(anchors) == 0 {
+		fmt.Fprintln(os.Stderr, "ctzipgen: crosswalk resolved nothing — wrong file?")
+		os.Exit(1)
+	}
+	filled := 0
+	for _, p := range pts {
+		if p.county != "" {
+			continue
+		}
+		nearest, bestD := "", math.MaxFloat64
+		for _, a := range anchors {
+			if d := haversine(p.lat, p.lon, a.lat, a.lon); d < bestD {
+				bestD, nearest = d, a.county
+			}
+		}
+		p.county = nearest
+		filled++
+	}
+
+	// 4. Self-check: the ZIPs GeoNames still labels with a real county must
+	//    agree with what we derived, or the derivation is wrong.
+	real := map[string]bool{
+		"Fairfield": true, "Hartford": true, "Litchfield": true, "Middlesex": true,
+		"New Haven": true, "New London": true, "Tolland": true, "Windham": true,
+	}
+	checked, bad := 0, 0
+	for _, p := range pts {
+		if !real[p.geoName] {
+			continue
+		}
+		checked++
+		if p.geoName != p.county {
+			bad++
+			fmt.Fprintf(os.Stderr, "MISMATCH %s: geonames %q, derived %q\n", p.zip, p.geoName, p.county)
+		}
+	}
+	fmt.Fprintf(os.Stderr, "ctzipgen: %d zips, %d from crosswalk, %d by nearest; cross-check %d/%d agree\n",
+		len(pts), len(pts)-filled, filled, checked-bad, checked)
+	if bad > 0 {
+		os.Exit(1)
+	}
+
+	sort.Slice(pts, func(i, j int) bool { return pts[i].zip < pts[j].zip })
+
+	var b strings.Builder
+	b.WriteString("// Code generated by cmd/ctzipgen. DO NOT EDIT.\n\n")
+	b.WriteString("package uls\n\n")
+	b.WriteString("// ctCounty maps a Connecticut ZIP to its legal county.\n")
+	b.WriteString("//\n")
+	b.WriteString("// GeoNames reports Connecticut's 2022 planning regions instead, which no\n")
+	b.WriteString("// award, callbook or log uses. See cmd/ctzipgen for how this was built and\n")
+	b.WriteString("// why a name-to-name mapping cannot work.\n")
+	fmt.Fprintf(&b, "var ctCounty = map[string]string{\n")
+	for _, p := range pts {
+		fmt.Fprintf(&b, "\t%q: %q,\n", p.zip, p.county)
+	}
+	b.WriteString("}\n")
+	fmt.Print(b.String())
+}
+
+func atof(s string) float64 {
+	v, _ := strconv.ParseFloat(strings.TrimSpace(s), 64)
+	return v
+}
+
+// haversine returns the great-circle distance in km. Connecticut is small
+// enough that a flat approximation would do, but this costs nothing and cannot
+// be wrong near the state's edges.
+func haversine(lat1, lon1, lat2, lon2 float64) float64 {
+	const r = 6371.0
+	dLat := (lat2 - lat1) * math.Pi / 180
+	dLon := (lon2 - lon1) * math.Pi / 180
+	a := math.Sin(dLat/2)*math.Sin(dLat/2) +
+		math.Cos(lat1*math.Pi/180)*math.Cos(lat2*math.Pi/180)*math.Sin(dLon/2)*math.Sin(dLon/2)
+	return 2 * r * math.Asin(math.Sqrt(a))
+}
+
+func must(err error) {
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "ctzipgen:", err)
+		os.Exit(1)
+	}
+}

cmd/dbdiag/main.go

@@ -109,9 +109,9 @@ func probeWB(conn *sql.DB, call string, dxcc int) {
         SELECT band, mode,
                MAX(CASE WHEN callsign = ? THEN 1 ELSE 0 END),
                MAX(CASE WHEN callsign = ?
-                         AND (lotw_rcvd = 'Y' OR qsl_rcvd = 'Y' OR eqsl_rcvd = 'Y')
+                         AND (lotw_rcvd IN ('Y','V') OR qsl_rcvd IN ('Y','V') OR eqsl_rcvd IN ('Y','V'))
                         THEN 1 ELSE 0 END),
-               MAX(CASE WHEN lotw_rcvd = 'Y' OR qsl_rcvd = 'Y' OR eqsl_rcvd = 'Y'
+               MAX(CASE WHEN lotw_rcvd IN ('Y','V') OR qsl_rcvd IN ('Y','V') OR eqsl_rcvd IN ('Y','V')
                         THEN 1 ELSE 0 END)
         FROM qso WHERE dxcc = ?
         GROUP BY band, mode

compact.go

@@ -0,0 +1,102 @@
+package main
+
+// Compacting a database.
+//
+// SQLite never shrinks a file on its own: deleting rows — or dropping a table,
+// which is what the schema-role cleanup does — frees pages INSIDE the file and
+// leaves the file the size it always was. A logbook that held 200 000 imported
+// QSOs for a day is still a 200 MB file the day after they are gone, and the
+// only thing that reclaims the space is a VACUUM, which rewrites the database
+// from scratch.
+//
+// Offered as a button rather than done automatically: a VACUUM rewrites the
+// whole file, needs room for a second copy of it while it runs, and takes real
+// time on a large logbook. That is a decision for the operator, at a moment they
+// choose — not something to spring on them during startup.
+
+import (
+	"database/sql"
+	"fmt"
+	"os"
+	"strings"
+
+	"hamlog/internal/applog"
+)
+
+// CompactResult is what one compaction did.
+type CompactResult struct {
+	// Path of the file compacted, empty for MySQL.
+	Path string `json:"path"`
+	// Backend is "sqlite" or "mysql" — a shared server is optimised, not vacuumed.
+	Backend string `json:"backend"`
+	// Before and After are file sizes in bytes; both 0 when there is no file.
+	Before int64 `json:"before"`
+	After  int64 `json:"after"`
+}
+
+// CompactDatabase reclaims the unused space in one of the two databases.
+//
+// target is "settings" or "logbook". They are separate on purpose: they are
+// different files, of very different sizes, and an operator compacting a 400 MB
+// logbook has no reason to wait on a 2 MB settings file as well.
+func (a *App) CompactDatabase(target string) (CompactResult, error) {
+	switch strings.ToLower(strings.TrimSpace(target)) {
+	case "settings":
+		if a.db == nil {
+			return CompactResult{}, fmt.Errorf("the settings database is not open")
+		}
+		return a.vacuumSQLite(a.db, a.dbPath)
+	case "logbook":
+		if a.logDb == nil {
+			return CompactResult{}, fmt.Errorf("the logbook is not open")
+		}
+		if a.dbBackend == "mysql" {
+			// A shared server's storage is the admin's business, and OPTIMIZE TABLE
+			// locks the table for the length of a rebuild — every other operator
+			// waits. Still offered, because a logbook that has had a large import
+			// deleted benefits from it just as much; it simply reports no sizes,
+			// which the server alone knows.
+			if _, err := a.logDb.ExecContext(a.ctx, "OPTIMIZE TABLE qso"); err != nil {
+				return CompactResult{}, fmt.Errorf("optimize qso: %w", err)
+			}
+			applog.Printf("compact: OPTIMIZE TABLE qso on the shared MySQL logbook")
+			return CompactResult{Backend: "mysql"}, nil
+		}
+		// No separate file: the settings database is serving as the logbook, and
+		// compacting it is the same operation.
+		if a.logDbPath == "" {
+			return a.vacuumSQLite(a.db, a.dbPath)
+		}
+		return a.vacuumSQLite(a.logDb, a.logDbPath)
+	}
+	return CompactResult{}, fmt.Errorf("unknown database %q", target)
+}
+
+// vacuumSQLite checkpoints the write-ahead log, then rewrites the file.
+func (a *App) vacuumSQLite(conn *sql.DB, path string) (CompactResult, error) {
+	res := CompactResult{Path: path, Backend: "sqlite", Before: fileSizeOf(path)}
+	// Fold the WAL back into the main file first. Without it the pages freed by a
+	// recent DELETE can still be sitting in the -wal, and the vacuum reports a
+	// saving the file on disk does not show.
+	if _, err := conn.ExecContext(a.ctx, "PRAGMA wal_checkpoint(TRUNCATE)"); err != nil {
+		applog.Printf("compact: wal checkpoint on %s: %v", path, err)
+	}
+	if _, err := conn.ExecContext(a.ctx, "VACUUM"); err != nil {
+		return res, fmt.Errorf("vacuum: %w", err)
+	}
+	res.After = fileSizeOf(path)
+	applog.Printf("compact: %s %d → %d bytes", path, res.Before, res.After)
+	return res, nil
+}
+
+// fileSizeOf returns a file's size, or 0 if it cannot be read.
+func fileSizeOf(path string) int64 {
+	if strings.TrimSpace(path) == "" {
+		return 0
+	}
+	fi, err := os.Stat(path)
+	if err != nil {
+		return 0
+	}
+	return fi.Size()
+}

copydir_test.go

@@ -0,0 +1,61 @@
+package main
+
+import (
+	"os"
+	"path/filepath"
+	"testing"
+)
+
+// TestCopyDirContentsCreatesDestination pins the bug that broke copying a QSL
+// design between profiles.
+//
+// copyDirContents wrote straight into dst without creating it, so the first
+// os.Create failed with ENOENT. The caller was written as "ignore
+// os.IsNotExist", meaning "the source has no assets, that is fine" — and ENOENT
+// from the failed write matched it exactly. Nothing was copied, no error was
+// reported, and the operator saw "copied design is incomplete: hero photo file
+// … not found" from the validation two lines later.
+func TestCopyDirContentsCreatesDestination(t *testing.T) {
+	base := t.TempDir()
+	src := filepath.Join(base, "src")
+	if err := os.MkdirAll(filepath.Join(src, "sub"), 0o755); err != nil {
+		t.Fatal(err)
+	}
+	if err := os.WriteFile(filepath.Join(src, "img_25c06bda.jpg"), []byte("hero"), 0o644); err != nil {
+		t.Fatal(err)
+	}
+	if err := os.WriteFile(filepath.Join(src, "sub", "back.png"), []byte("back"), 0o644); err != nil {
+		t.Fatal(err)
+	}
+
+	// dst does not exist — the case of every first copy.
+	dst := filepath.Join(base, "dst")
+	if err := copyDirContents(src, dst); err != nil {
+		t.Fatalf("copyDirContents: %v", err)
+	}
+	for name, want := range map[string]string{
+		"img_25c06bda.jpg": "hero",
+		"sub/back.png":     "back",
+	} {
+		got, err := os.ReadFile(filepath.Join(dst, filepath.FromSlash(name)))
+		if err != nil {
+			t.Errorf("%s: %v", name, err)
+			continue
+		}
+		if string(got) != want {
+			t.Errorf("%s = %q, want %q", name, got, want)
+		}
+	}
+}
+
+// A missing SOURCE is still an error from copyDirContents itself — it is the
+// caller that decides whether a design with no pictures is acceptable, and it
+// can only decide that if this does not quietly succeed.
+func TestCopyDirContentsMissingSource(t *testing.T) {
+	base := t.TempDir()
+	if err := copyDirContents(filepath.Join(base, "nope"), filepath.Join(base, "dst")); err == nil {
+		t.Fatal("copying a missing source returned no error")
+	} else if !os.IsNotExist(err) {
+		t.Fatalf("want a not-exist error, got %v", err)
+	}
+}

decodegrids_test.go

@@ -0,0 +1,160 @@
+package main
+
+import (
+	"fmt"
+	"path/filepath"
+	"sync"
+	"testing"
+
+	"hamlog/internal/gridcache"
+)
+
+// The grid cache used to drop EVERYTHING at its ceiling. That was survivable
+// while the only feed was this station's own decodes, which never reached it.
+// Fed by anything larger it is a cliff: every locator in the cluster list
+// disappears at once, periodically, and the operator sees the column empty
+// itself for no reason.
+//
+// Rotation keeps the previous generation, so a full cache costs the older half
+// and nothing more.
+func TestDecodeGridRotationKeepsThePreviousGeneration(t *testing.T) {
+	a := &App{}
+
+	// Fill exactly one generation.
+	for i := 0; i < decodeGridsCap; i++ {
+		a.rememberDecodeGrid(fmt.Sprintf("CALL%06d", i), "JN36", gridcache.SourceDecode)
+	}
+	if got := a.lookupDecodeGrid("CALL000000"); got != "JN36" {
+		t.Fatalf("first entry lost before any rotation: %q", got)
+	}
+	if a.decodeGridsOld != nil {
+		t.Fatal("rotated early — the cap is the ceiling of ONE generation")
+	}
+
+	// One more entry rotates.
+	a.rememberDecodeGrid("NEWCALL", "IO91", gridcache.SourceDecode)
+	if a.decodeGridsOld == nil {
+		t.Fatal("did not rotate at the cap")
+	}
+	if got := a.lookupDecodeGrid("NEWCALL"); got != "IO91" {
+		t.Errorf("the entry that caused the rotation was lost: %q", got)
+	}
+	// The whole previous generation is still readable — this is the point.
+	if got := a.lookupDecodeGrid("CALL000000"); got != "JN36" {
+		t.Errorf("a locator from the previous generation was dropped: %q — that is the cliff again", got)
+	}
+	if got := a.lookupDecodeGrid("CALL099999"); got != "JN36" {
+		t.Errorf("previous generation incomplete: %q", got)
+	}
+
+	// A second rotation is what finally retires the oldest half.
+	for i := 0; i < decodeGridsCap; i++ {
+		a.rememberDecodeGrid(fmt.Sprintf("SECOND%06d", i), "KP20", gridcache.SourceDecode)
+	}
+	if got := a.lookupDecodeGrid("CALL000000"); got != "" {
+		t.Errorf("the cache is unbounded: %q survived two rotations", got)
+	}
+	if got := a.lookupDecodeGrid("NEWCALL"); got != "IO91" {
+		t.Errorf("an entry one generation old was retired too early: %q", got)
+	}
+}
+
+// Callsigns are normalised on the way in AND on the way out, or a spot for
+// "f4bpo" would miss a grid learnt as "F4BPO".
+func TestDecodeGridCaseAndBlanks(t *testing.T) {
+	a := &App{}
+	a.rememberDecodeGrid(" f4bpo ", "JN36", gridcache.SourceDecode)
+	if got := a.lookupDecodeGrid("F4BPO"); got != "JN36" {
+		t.Errorf("lookup of the upper-case form failed: %q", got)
+	}
+	a.rememberDecodeGrid("", "JN36", gridcache.SourceDecode)
+	a.rememberDecodeGrid("K1ABC", "", gridcache.SourceDecode)
+	if got := a.lookupDecodeGrid("K1ABC"); got != "" {
+		t.Errorf("stored an empty grid: %q", got)
+	}
+}
+
+// The write path runs on the decode goroutine while the cluster status builder
+// reads. Rotation swaps the map headers, so an unguarded read is a data race
+// rather than a stale value.
+//
+// This build is CGO-free, so -race is not available here; the test exercises the
+// interleaving and would fault on a concurrent map access even without it.
+func TestDecodeGridConcurrentAccess(t *testing.T) {
+	a := &App{}
+	var wg sync.WaitGroup
+	wg.Add(2)
+	go func() {
+		defer wg.Done()
+		for i := 0; i < 20000; i++ {
+			a.rememberDecodeGrid(fmt.Sprintf("W%05d", i), "FN31", gridcache.SourceDecode)
+		}
+	}()
+	go func() {
+		defer wg.Done()
+		for i := 0; i < 20000; i++ {
+			_ = a.lookupDecodeGrid(fmt.Sprintf("W%05d", i))
+		}
+	}()
+	wg.Wait()
+}
+
+// Only a CHANGE may reach the write batch.
+//
+// The feeds repeat themselves — the same station is reported by dozens of
+// receivers a minute — so queueing every report would put the whole stream in
+// the batch instead of the news in it, and turn a cache into a write amplifier.
+func TestOnlyChangesAreQueued(t *testing.T) {
+	st, err := gridcache.Open(filepath.Join(t.TempDir(), "grids.db"), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer st.Close()
+	a := &App{gridStore: st}
+
+	a.rememberDecodeGrid("F4BPO", "JN36", gridcache.SourceDecode)
+	if n := st.Pending(); n != 1 {
+		t.Fatalf("a new locator queued %d writes, want 1", n)
+	}
+	if err := st.Flush(); err != nil {
+		t.Fatal(err)
+	}
+
+	// The same report, a hundred times over, is not news.
+	for i := 0; i < 100; i++ {
+		a.rememberDecodeGrid("F4BPO", "JN36", gridcache.SourceDecode)
+	}
+	if n := st.Pending(); n != 0 {
+		t.Errorf("unchanged reports queued %d writes — the batch would carry the whole feed", n)
+	}
+
+	// A station that moved is.
+	a.rememberDecodeGrid("F4BPO", "KP30", gridcache.SourceDecode)
+	if n := st.Pending(); n != 1 {
+		t.Errorf("a changed locator queued %d writes, want 1", n)
+	}
+	if got := a.lookupDecodeGrid("F4BPO"); got != "KP30" {
+		t.Errorf("the map kept the old locator: %q", got)
+	}
+}
+
+// Rotation must be OFF while a store is attached: it would discard callsigns the
+// database still holds, and the lookup would then miss something we know.
+func TestNoRotationWhilePersisting(t *testing.T) {
+	st, err := gridcache.Open(filepath.Join(t.TempDir(), "grids.db"), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer st.Close()
+	a := &App{gridStore: st}
+
+	for i := 0; i < decodeGridsCap+10; i++ {
+		a.rememberDecodeGrid(fmt.Sprintf("CALL%06d", i), "JN36", gridcache.SourceDecode)
+	}
+	if a.decodeGridsOld != nil {
+		t.Error("rotated while a store was attached — locators the database holds would go missing")
+	}
+	if got := a.lookupDecodeGrid("CALL000000"); got != "JN36" {
+		t.Errorf("the first entry was dropped: %q", got)
+	}
+}

flexrstchase.go

@@ -0,0 +1,187 @@
+package main
+
+// Chasing a split pile-up by the report the DX just sent.
+//
+// Working a DXpedition in split means guessing where it is listening. The DX
+// answers one station, sends "5NN", and moves on; the useful information is
+// therefore not the callsign it answered but the FREQUENCY that callsign was
+// transmitting on, because the DX's receiver was there a second ago.
+//
+// A CW skimmer already knows this. SDC (Software Defined Connector) decodes the
+// whole pile-up and marks each report on the panadapter as a spot — the marker
+// TEXT is configured in SDC by the operator ("599" for a fresh report, "X" for
+// an older one, by default). Those spots reach OpsLog already: it subscribes to
+// the radio's spot feed, and every spot another program posts arrives on
+// Flex.OnForeignSpot.
+//
+// So the whole feature is: recognise the marker, move the TRANSMIT slice there,
+// leave the receive slice on the DX. Nothing here decodes anything.
+//
+// Three deliberate choices:
+//
+//   - the marker text is a SETTING, not a constant. It is chosen in SDC, and
+//     any guess made here would be wrong for the operator who chose otherwise.
+//   - only the transmit slice moves, never the receive slice. Losing the DX is
+//     a worse outcome than a missed call.
+//   - the offset is signed and in Hz, because working "up a bit" from where the
+//     last station was answered is exactly how a pile-up is chased.
+
+import (
+	"encoding/json"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/cat"
+)
+
+const keyFlexRSTChase = "flex.rst_chase"
+
+// FlexRSTChase is the whole configuration.
+type FlexRSTChase struct {
+	Enabled bool `json:"enabled"`
+	// Markers are the skimmer's marker texts, comma-separated ("599,5NN").
+	// Matched against the spot's callsign field, case-insensitively and whole:
+	// a spot IS the marker or it is an ordinary callsign, and a substring rule
+	// would drag in any station whose call happens to contain the digits.
+	Markers string `json:"markers"`
+	// OffsetHz is added to the marker's frequency. Signed: chasing upward from
+	// the last station worked is the usual tactic, downward happens too.
+	OffsetHz int `json:"offset_hz"`
+	// SplitOnly refuses to act when the radio is not in split. On by default:
+	// out of split the transmit slice IS the receive slice, so "move the TX
+	// slice" would take the operator off the DX they are listening to.
+	SplitOnly bool `json:"split_only"`
+}
+
+var defaultFlexRSTChase = FlexRSTChase{Enabled: false, Markers: "599", OffsetHz: 0, SplitOnly: true}
+
+// rstChaseMinGap throttles the moves. A skimmer marks every report it decodes,
+// and a busy pile-up produces several a second; without a floor the transmit
+// slice would twitch continuously and never be anywhere long enough to call.
+const rstChaseMinGap = 700 * time.Millisecond
+
+// rstChaseMinStep ignores a marker that lands where the slice already is.
+// Re-sending the same frequency is not free: it is a command to the radio and a
+// slice status back, several times a second, for no change at all.
+const rstChaseMinStep = 20 // Hz
+
+var (
+	rstChaseMu   sync.Mutex
+	rstChaseLast time.Time
+	rstChaseFreq int64
+)
+
+// GetFlexRSTChase returns the stored configuration (defaults when unset).
+func (a *App) GetFlexRSTChase() FlexRSTChase {
+	s := defaultFlexRSTChase
+	if a.settings == nil {
+		return s
+	}
+	// settingOr, NOT settings.Get with profileScope(): the store already applies
+	// the active profile's prefix, so scoping the key here wrote p3.flex.rst_chase
+	// and read p3.p3.flex.rst_chase — the switch could never be read back on, and
+	// the feature did nothing at all with no sign of why.
+	if v := a.settingOr(keyFlexRSTChase, ""); strings.TrimSpace(v) != "" {
+		_ = json.Unmarshal([]byte(v), &s)
+	}
+	return normRSTChase(s)
+}
+
+// SaveFlexRSTChase stores the configuration.
+func (a *App) SaveFlexRSTChase(s FlexRSTChase) error {
+	b, err := json.Marshal(normRSTChase(s))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyFlexRSTChase, string(b))
+	return nil
+}
+
+// SetFlexRSTChaseEnabled flips the switch alone.
+//
+// Its own binding because this belongs on a button in the panel, not in a
+// settings page: it is turned on when a DXpedition appears and off when it is
+// worked, which is a thing done mid-QSO with one hand.
+func (a *App) SetFlexRSTChaseEnabled(on bool) error {
+	s := a.GetFlexRSTChase()
+	s.Enabled = on
+	return a.SaveFlexRSTChase(s)
+}
+
+func normRSTChase(s FlexRSTChase) FlexRSTChase {
+	if strings.TrimSpace(s.Markers) == "" {
+		s.Markers = defaultFlexRSTChase.Markers
+	}
+	// A pile-up is a few kHz wide. Anything past that is a typo (Hz entered as
+	// if it were kHz), and honouring it would transmit far outside the segment.
+	if s.OffsetHz > 10000 {
+		s.OffsetHz = 10000
+	}
+	if s.OffsetHz < -10000 {
+		s.OffsetHz = -10000
+	}
+	return s
+}
+
+// rstChaseMarkerSet splits the configured markers into a comparison set.
+func rstChaseMarkerSet(markers string) map[string]bool {
+	out := map[string]bool{}
+	for _, m := range strings.FieldsFunc(markers, func(r rune) bool { return r == ',' || r == ';' || r == ' ' }) {
+		if m = strings.ToUpper(strings.TrimSpace(m)); m != "" {
+			out[m] = true
+		}
+	}
+	return out
+}
+
+// handleForeignSpot is what a skimmer's spot arrives at.
+func (a *App) handleForeignSpot(callsign string, freqHz int64) {
+	cfg := a.GetFlexRSTChase()
+	if !cfg.Enabled || a.cat == nil {
+		return
+	}
+	if !rstChaseMarkerSet(cfg.Markers)[strings.ToUpper(strings.TrimSpace(callsign))] {
+		return // an ordinary spot: another station's callsign, not a report
+	}
+	// From here on every refusal is logged. A marker WAS recognised, so the
+	// operator is entitled to know why the slice stayed where it was — silence
+	// at this point is indistinguishable from a feature that does not work.
+	if cfg.SplitOnly && !a.cat.State().Split {
+		applog.Printf("rst chase: %s marked at %s, but the radio is not in split — ignored",
+			strings.ToUpper(callsign), hzText(freqHz))
+		return
+	}
+	target := freqHz + int64(cfg.OffsetHz)
+	if target <= 0 {
+		return
+	}
+	now := time.Now()
+	rstChaseMu.Lock()
+	if now.Sub(rstChaseLast) < rstChaseMinGap {
+		rstChaseMu.Unlock()
+		return
+	}
+	if rstChaseFreq != 0 && absInt64(target-rstChaseFreq) < rstChaseMinStep {
+		rstChaseMu.Unlock()
+		return
+	}
+	rstChaseLast, rstChaseFreq = now, target
+	rstChaseMu.Unlock()
+
+	if err := a.cat.FlexDo(func(fc cat.FlexController) error {
+		return fc.SetTXSliceFrequency(target)
+	}); err != nil {
+		applog.Printf("rst chase: moving the TX slice to %s failed: %v", hzText(target), err)
+		return
+	}
+	applog.Printf("rst chase: %s marked at %s → TX slice to %s (offset %+d Hz)",
+		strings.ToUpper(callsign), hzText(freqHz), hzText(target), cfg.OffsetHz)
+}
+
+// hzText renders a frequency the way an operator reads one on a dial.
+func hzText(hz int64) string {
+	return strconv.FormatFloat(float64(hz)/1000, 'f', 3, 64) + " kHz"
+}

flexzoom.go

@@ -0,0 +1,122 @@
+package main
+
+// Panadapter auto-zoom on a spot click.
+//
+// A CW signal is 100 Hz wide, an FT8 slot 50 Hz in a 3 kHz sub-band, an SSB
+// station 2.7 kHz. One panadapter width cannot serve all three: at 200 kHz the
+// CW station you clicked is a hair, and at 25 kHz an FT8 window shows one
+// eighth of the traffic. So the width follows the MODE of the spot, which is
+// the only thing that determines how much spectrum is worth looking at.
+//
+// The command is SmartSDR's own: "display pan s <pan> bandwidth=<MHz>", with an
+// optional re-centre. Same approach as DXHunter, which is where the defaults
+// below come from.
+
+import (
+	"encoding/json"
+	"strings"
+
+	"hamlog/internal/cat"
+)
+
+const keyFlexZoom = "flex.spot_zoom"
+
+// FlexZoomSettings is the per-mode-group visible width, in kHz.
+//
+// kHz and not MHz: an operator thinks "25 kHz of CW", and a form asking for
+// 0.025 invites a zero too many — which on a panadapter is not an error message
+// but a display that has silently gone somewhere else.
+type FlexZoomSettings struct {
+	Enabled bool `json:"enabled"`
+	CWkHz   int  `json:"cw_khz"`
+	SSBkHz  int  `json:"ssb_khz"`
+	DigikHz int  `json:"digi_khz"`
+	// Centre re-centres the panadapter on EVERY spot, not just the ones that
+	// would otherwise fall outside the new window — the display always follows.
+	// Off by default: an operator who has arranged their window around a run
+	// frequency does not necessarily want it moved every time they look at
+	// someone else, and a spot already on screen stays where it is either way.
+	Centre bool `json:"centre"`
+}
+
+// defaultFlexZoom — the widths DXHunter settled on, in kHz.
+var defaultFlexZoom = FlexZoomSettings{Enabled: false, CWkHz: 25, SSBkHz: 200, DigikHz: 50, Centre: false}
+
+// flexZoomGroup maps a spot's mode to the three widths worth distinguishing.
+//
+// The mode arrives as whatever the cluster comment implied — "CW", "FT8",
+// "USB", "RTTY" — so this takes the ADIF-ish name, not the Flex one. Anything
+// unrecognised is digital, which is the safe end: a 50 kHz window is readable
+// for every mode, where 25 kHz is not.
+func flexZoomGroup(mode string) string {
+	switch strings.ToUpper(strings.TrimSpace(mode)) {
+	case "CW", "CWR", "CWL", "CWU":
+		return "cw"
+	case "SSB", "USB", "LSB", "AM", "FM", "NFM", "DFM", "SAM", "PHONE", "DV":
+		return "ssb"
+	}
+	return "digi"
+}
+
+// GetFlexZoom returns the settings, defaults included.
+func (a *App) GetFlexZoom() FlexZoomSettings {
+	out := defaultFlexZoom
+	if raw := a.settingOr(keyFlexZoom, ""); raw != "" {
+		var s FlexZoomSettings
+		if err := json.Unmarshal([]byte(raw), &s); err == nil {
+			out = normFlexZoom(s)
+		}
+	}
+	return out
+}
+
+// normFlexZoom clamps the widths to something a panadapter can actually show.
+// 1 kHz is narrower than most filters; 14 MHz is a whole HF spectrum.
+func normFlexZoom(s FlexZoomSettings) FlexZoomSettings {
+	clamp := func(v, def int) int {
+		if v < 1 || v > 14000 {
+			return def
+		}
+		return v
+	}
+	s.CWkHz = clamp(s.CWkHz, defaultFlexZoom.CWkHz)
+	s.SSBkHz = clamp(s.SSBkHz, defaultFlexZoom.SSBkHz)
+	s.DigikHz = clamp(s.DigikHz, defaultFlexZoom.DigikHz)
+	return s
+}
+
+// SaveFlexZoom persists the settings.
+func (a *App) SaveFlexZoom(s FlexZoomSettings) error {
+	b, err := json.Marshal(normFlexZoom(s))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyFlexZoom, string(b))
+	return nil
+}
+
+// FlexZoomForSpot resizes the panadapter for a spot that was just clicked.
+//
+// Called from the click handler, AFTER the rig has been tuned: the zoom is a
+// view change and must never delay the frequency change an operator is waiting
+// for. Does nothing at all unless the option is on and the backend is a Flex —
+// no other radio has a panadapter to zoom.
+func (a *App) FlexZoomForSpot(mode string, freqHz int64) {
+	if a.cat == nil {
+		return
+	}
+	z := a.GetFlexZoom()
+	if !z.Enabled {
+		return
+	}
+	khz := z.DigikHz
+	switch flexZoomGroup(mode) {
+	case "cw":
+		khz = z.CWkHz
+	case "ssb":
+		khz = z.SSBkHz
+	}
+	_ = a.cat.FlexDo(func(fc cat.FlexController) error {
+		return fc.ZoomPan(float64(khz)/1000, float64(freqHz)/1e6, z.Centre)
+	})
+}

flexzoom_test.go

@@ -0,0 +1,32 @@
+package main
+
+import "testing"
+
+// The width follows the mode, and an unrecognised mode must land on the widest
+// of the three: a 50 kHz window is readable for everything, where 25 kHz shows
+// one eighth of an FT8 sub-band.
+func TestFlexZoomGroup(t *testing.T) {
+	for mode, want := range map[string]string{
+		"CW": "cw", "cw": "cw", "CWR": "cw",
+		"SSB": "ssb", "USB": "ssb", "LSB": "ssb", "FM": "ssb", "AM": "ssb",
+		"FT8": "digi", "FT4": "digi", "RTTY": "digi", "JS8": "digi", "PSK31": "digi",
+		"": "digi", "something new": "digi",
+	} {
+		if got := flexZoomGroup(mode); got != want {
+			t.Errorf("flexZoomGroup(%q) = %q, want %q", mode, got, want)
+		}
+	}
+}
+
+// A width of zero would command "bandwidth=0.000000" and take the panadapter
+// somewhere the operator cannot get back from by eye.
+func TestNormFlexZoomClamps(t *testing.T) {
+	got := normFlexZoom(FlexZoomSettings{CWkHz: 0, SSBkHz: -5, DigikHz: 99999})
+	if got.CWkHz != defaultFlexZoom.CWkHz || got.SSBkHz != defaultFlexZoom.SSBkHz || got.DigikHz != defaultFlexZoom.DigikHz {
+		t.Errorf("out-of-range widths not replaced by the defaults: %+v", got)
+	}
+	ok := normFlexZoom(FlexZoomSettings{CWkHz: 10, SSBkHz: 150, DigikHz: 40})
+	if ok.CWkHz != 10 || ok.SSBkHz != 150 || ok.DigikHz != 40 {
+		t.Errorf("valid widths must be kept as they are: %+v", ok)
+	}
+}

frontend/package.json.md5

@@ -1 +1 @@
-f9b41e192918fa2511f68cd1b361fcd3
+704fe1bf370b669665df0606fae8a69d

frontend/src/components/AlertsModal.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useMemo, useState } from 'react';
+import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import { Bell, Plus, Trash2, Volume2, Mail, Eye, X, Search } from 'lucide-react';
 import {
   Dialog, DialogContent, DialogHeader, DialogTitle, DialogDescription,
@@ -102,17 +102,40 @@ export function AlertsModal({ onClose, bands, modes, countries }: {
     return alerts.Rule.createFrom({ ...d, [key]: next });
   });
 
+  // Saving used to be silent: the dialog stays open and the rule looks exactly
+  // as it did a second earlier, so there was nothing to tell an operator whether
+  // the click had registered. A line that says so, and clears itself.
+  const [savedMsg, setSavedMsg] = useState('');
+  const savedTimer = useRef(0);
+  function flashSaved(text: string) {
+    setSavedMsg(text);
+    window.clearTimeout(savedTimer.current);
+    savedTimer.current = window.setTimeout(() => setSavedMsg(''), 3000);
+  }
+  useEffect(() => () => window.clearTimeout(savedTimer.current), []);
+
   async function save() {
     if (!draft) return;
     if (!draft.name.trim()) { setErr(t('altm.giveName')); return; }
-    try { const saved = await SaveAlertRule(draft); await refresh(); loadDraft(saved as Rule); setErr(''); }
+    try {
-    catch (e: any) { setErr(String(e?.message ?? e)); }
+      const saved = await SaveAlertRule(draft);
+      await refresh();
+      loadDraft(saved as Rule);
+      setErr('');
+      flashSaved(t('altm.saved', { name: draft.name.trim() }));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
   }
   async function del() {
     if (!draft) return;
     if (!draft.id) { loadDraft(null); return; }
     if (!window.confirm(t('altm.deleteConfirm', { name: draft.name }))) return;
-    try { await DeleteAlertRule(draft.id); loadDraft(null); await refresh(); }
+    try {
+      const name = draft.name;
+      await DeleteAlertRule(draft.id);
+      loadDraft(null);
+      await refresh();
+      flashSaved(t('altm.deleted', { name }));
+    }
     catch (e: any) { setErr(String(e?.message ?? e)); }
   }
 
@@ -257,6 +280,7 @@ export function AlertsModal({ onClose, bands, modes, countries }: {
                 {/* Editor actions */}
                 <div className="flex items-center gap-2 px-3 py-2 border-t border-border/60">
                   {err && <span className="text-[11px] text-danger flex-1 truncate">{err}</span>}
+                  {!err && savedMsg && <span className="text-[11px] text-success flex-1 truncate">{savedMsg}</span>}
                   <div className="flex-1" />
                   <Button variant="ghost" size="sm" className="text-danger" onClick={del}><Trash2 className="size-3.5" /> {t('altm.delete')}</Button>
                   <Button size="sm" onClick={save}>{t('altm.saveRule')}</Button>

frontend/src/components/AmpCard.tsx

@@ -174,6 +174,45 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
   const operate = viaFlex ? !!flex?.amp_operate : !!pg.operate;
   const connected = !!pg.connected || viaFlex;
   const fault = flex?.amp_fault;
+
+  // Meters built from the amplifier's own GSCP status frame, for when the radio
+  // is not feeding a meter stream.
+  //
+  // Whether there is power is the amp's state field; how much is the plain
+  // forward figure. NOT "peakfwd" — that is a latched maximum which is never
+  // reset and survives in the last-known status after the amp disconnects, so it
+  // once claimed 1350 W from an old transmission while 10 W was going out. Same
+  // reason peak_id is left alone. Both readings are gated on transmit so they
+  // fall back to zero between overs instead of freezing on the last one.
+  const pgxlMeters = () => {
+    if (!pg.connected) return null;
+    const txing = typeof flex?.transmitting === 'boolean' ? flex.transmitting : /TRANSMIT/i.test(pg.state || '');
+    const fwdW = peakHold('pgfwd', txing ? Number(pg.fwd_w) || 0 : 0);
+    const idA = peakHold('pgid', txing ? Number(pg.id) || 0 : 0);
+    const swr = peakHold('pgswr', txing ? Number(pg.vswr) || 0 : 0);
+    const tempC = Number(pg.temperature) || 0;
+    // Two columns, not four. The card sits beside a tall neighbour in Station
+    // Control, so a single row of four leaves the height empty and squeezes each
+    // bar into a quarter width — two rows of two use the room that is already
+    // there and give every bar twice the resolution.
+    return (
+      <div className="grid grid-cols-2 gap-2 mt-2 pt-2 border-t border-border/50">
+        <MeterBar label={t('flxp.outputPower')} value={fwdW} unit="W" lo={0} hi={2000}
+          display={`${Math.round(fwdW)} W`}
+          segColor={(f) => (f > 0.9 ? '#dc2626' : f > 0.75 ? '#f59e0b' : '#ea580c')} />
+        <MeterBar label={t('ampw.id')} value={idA} lo={0} hi={25} display={`${idA.toFixed(1)} A`} accent="#16a34a" />
+        {/* Below 1:1 the reading is meaningless, so an idle amp shows a flat bar
+            rather than a zero that looks like a perfect match. */}
+        <MeterBar label={t('ampw.swr')} value={swr >= 1 ? swr : 1} lo={1} hi={3}
+          display={swr >= 1 ? swr.toFixed(1) : '—'}
+          segColor={(f) => (f > 0.75 ? '#dc2626' : f > 0.4 ? '#f59e0b' : '#16a34a')} />
+        <MeterBar label={t('ampw.temp')} value={tempC} unit="°C" lo={0} hi={100}
+          display={tempC > 0 ? `${Math.round(tempC)} °C` : '—'}
+          segColor={(f) => (f > 0.8 ? '#dc2626' : f > 0.6 ? '#f59e0b' : '#ea580c')} />
+      </div>
+    );
+  };
+
   return (
     <Card icon={Flame} ckey="amplifier" title={`${t('flxp.amplifier')}${flex?.amp_model ? ' · ' + flex.amp_model : (pg.model ? ' · ' + pg.model : '')} · ${amp.name}`} accent="#ea580c">
       <div className="flex items-center gap-3 flex-wrap">
@@ -204,13 +243,20 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
           <span className="px-2 py-1 rounded bg-danger-muted text-danger-muted-foreground text-xs font-bold">{t('flxp.fault')}: {fault}</span>
         )}
       </div>
-      {/* Amplifier meters (FWD / ID / TEMP …) from the FlexRadio UDP stream. */}
+      {/* Amplifier meters (FWD / ID / TEMP …).
-      {viaFlex && (() => {
+          The FlexRadio UDP stream is the preferred source — it is fast and reads
+          the same as SmartSDR. When there is no Flex, or it is not streaming,
+          the amplifier's OWN link carries the same figures; falling back to them
+          is what the docked widget already does. Without that fallback this card
+          showed an operator on a Kenwood nothing but OPERATE and the fan mode,
+          while the amplifier was reporting power, current and temperature all
+          along. */}
+      {(() => {
         const meters = (flex?.meters as any[]) || [];
         const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
         const amps = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
           && !/^(RL|DRV)$/i.test((m.name || '').trim()));
-        if (amps.length === 0) return null;
+        if (!viaFlex || amps.length === 0) return pgxlMeters();
         // Power comes from the radio's meter stream and nothing else. The
         // amplifier also reports a "peakfwd", and using it was a mistake twice
         // over: it is a latched maximum that is never reset, and it survives in

frontend/src/components/AppearancePanel.tsx

@@ -0,0 +1,289 @@
+import { useEffect, useState } from 'react';
+import { GetMatrixColors, GetRowColors, SaveMatrixColors, SaveRowColors } from '../../wailsjs/go/main/App';
+import { Checkbox } from '@/components/ui/checkbox';
+import { useI18n } from '@/lib/i18n';
+import { cn } from '@/lib/utils';
+import type { RowColorSettings } from '@/lib/rowColors';
+import {
+  MATRIX_VARS, applyMatrixColors, effectiveMatrixColor, emptyMatrixColors,
+  type MatrixColors,
+} from '@/lib/matrixColors';
+
+// A fixed palette plus a free picker. Muted values on purpose: they are
+// composited at low opacity over a dark grid, where a saturated colour reads as
+// an error state rather than a status.
+const PALETTE = [
+  '#16a34a', '#0ea5e9', '#f59e0b', '#a855f7',
+  '#dc2626', '#14b8a6', '#eab308', '#ec4899',
+  '#64748b', '#84cc16', '#6366f1', '#f97316',
+];
+
+// The rule ids the backend orders; the labels live here so a translation never
+// travels through the settings row.
+const LABELS: Record<string, string> = {
+  to_send: 'appr.ruleToSend',
+  confirmed: 'appr.ruleConfirmed',
+  sent: 'appr.ruleSent',
+  worked: 'appr.ruleWorked',
+};
+
+// The channels a rule can be scoped to. "worked" is the catch-all — it means
+// nothing on ANY channel — so narrowing it would say nothing.
+const CHANNELS = ['qsl', 'lotw', 'eqsl', 'qrz', 'hamlog'] as const;
+const CHANNEL_LABELS: Record<string, string> = {
+  qsl: 'appr.chQsl', lotw: 'LoTW', eqsl: 'eQSL', qrz: 'QRZ.com', hamlog: 'HAMLOG.online',
+};
+
+// MatrixColorsSection recolours the band/mode matrix — the PH/CW/DIG grid in the
+// Stats panel.
+//
+// The pickers are seeded from what the matrix is painting RIGHT NOW (the active
+// theme's ramp, or an existing override), not from a fixed palette: the operator
+// starts from the colours in front of them and moves one, instead of being
+// handed six values that may belong to a theme they stopped using. Every change
+// is applied to the live document at once, so the sample row below is the real
+// thing rather than a mock-up of it.
+function MatrixColorsSection() {
+  const { t } = useI18n();
+  const [cfg, setCfg] = useState<MatrixColors | null>(null);
+
+  useEffect(() => {
+    (async () => {
+      try {
+        setCfg((await GetMatrixColors()) as any);
+      } catch {
+        setCfg(emptyMatrixColors());
+      }
+    })();
+  }, []);
+
+  const save = (next: MatrixColors) => {
+    setCfg(next);
+    applyMatrixColors(next); // live, before the round trip — the panel must not lag the choice
+    SaveMatrixColors(next as any).catch(() => {});
+  };
+
+  // Turning it ON with nothing stored would change nothing at all and read as a
+  // broken switch, so the empty slots are filled from the theme's current ramp:
+  // the operator sees six swatches that match the grid and edits from there.
+  const enable = (on: boolean) => {
+    if (!cfg) return;
+    if (!on) {
+      save({ ...cfg, enabled: false });
+      return;
+    }
+    const seeded = { ...cfg, enabled: true };
+    for (const { key, cssVar } of MATRIX_VARS) {
+      if (!String(seeded[key] ?? '').trim()) seeded[key] = effectiveMatrixColor(cssVar);
+    }
+    save(seeded);
+  };
+
+  // Reset clears the overrides but keeps the section switched on, then re-seeds
+  // from the theme — "back to the theme's colours", which is what an operator
+  // means by reset here, rather than "switch the whole feature off".
+  const reset = () => {
+    if (!cfg) return;
+    applyMatrixColors({ ...emptyMatrixColors(), enabled: false });
+    const seeded = { ...emptyMatrixColors(), enabled: true };
+    for (const { key, cssVar } of MATRIX_VARS) seeded[key] = effectiveMatrixColor(cssVar);
+    save(seeded);
+  };
+
+  if (!cfg) return null;
+
+  return (
+    <div className="space-y-3 border-t border-border/60 pt-4">
+      <label className="flex items-start gap-2 text-sm cursor-pointer">
+        <Checkbox checked={cfg.enabled} className="mt-0.5" onCheckedChange={(c) => enable(!!c)} />
+        <span>
+          {t('appr.matrixEnable')}{' '}
+          <span className="text-xs text-muted-foreground">{t('appr.matrixHint')}</span>
+        </span>
+      </label>
+
+      {cfg.enabled && (
+        <div className="space-y-3">
+          <div className="grid grid-cols-2 gap-x-4 gap-y-2">
+            {MATRIX_VARS.map(({ key, cssVar, label }) => (
+              <label key={key} className="flex items-center gap-2 text-sm cursor-pointer">
+                <input
+                  type="color"
+                  value={String(cfg[key] || '').trim() || effectiveMatrixColor(cssVar)}
+                  onChange={(e) => save({ ...cfg, [key]: e.target.value })}
+                  className="size-6 rounded-md border border-border bg-transparent p-0 cursor-pointer shrink-0"
+                />
+                {t(label)}
+              </label>
+            ))}
+          </div>
+
+          {/* The matrix as it will actually look: same tokens, same shapes. */}
+          <div className="flex items-center gap-1.5">
+            <span className="text-xs text-muted-foreground w-10 shrink-0">{t('appr.matrixSample')}</span>
+            <span className="inline-block w-7 h-5 rounded bg-mx-call-conf" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-call-work" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-dx-conf" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-dx-work" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-none" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-none ring-2 ring-mx-cur ring-inset" />
+          </div>
+
+          <button type="button" onClick={reset}
+            className="text-xs text-muted-foreground underline underline-offset-2 hover:text-foreground">
+            {t('appr.matrixReset')}
+          </button>
+        </div>
+      )}
+    </div>
+  );
+}
+
+export function AppearancePanel() {
+  const { t } = useI18n();
+  const [cfg, setCfg] = useState<RowColorSettings | null>(null);
+
+  useEffect(() => {
+    (async () => {
+      try { setCfg((await GetRowColors()) as any); } catch { /* defaults on the backend */ }
+    })();
+  }, []);
+
+  const save = (next: RowColorSettings) => {
+    setCfg(next);
+    SaveRowColors(next as any).catch(() => {});
+  };
+  const patchRule = (id: string, patch: Partial<{ color: string; enabled: boolean; channels: string[] }>) => {
+    if (!cfg) return;
+    save({ ...cfg, rules: cfg.rules.map((r) => (r.id === id ? { ...r, ...patch } : r)) });
+  };
+
+  // The rule card shows the row exactly as the grid will draw it, so the choice
+  // is made by looking rather than by imagining.
+  const preview = (color: string): Record<string, string> => {
+    const st = cfg?.style ?? 'bar';
+    const pct = cfg?.intensity ?? 12;
+    const out: Record<string, string> = {};
+    if (st === 'tint' || st === 'both') out.backgroundColor = `color-mix(in srgb, ${color} ${pct}%, transparent)`;
+    if (st === 'bar' || st === 'both') out.boxShadow = `inset 3px 0 0 ${color}`;
+    return out;
+  };
+
+  if (!cfg) return <div className="p-1 text-sm text-muted-foreground">…</div>;
+
+  return (
+    <div className="space-y-4">
+      <label className="flex items-start gap-2 text-sm cursor-pointer">
+        <Checkbox checked={!!cfg.bandmap_lotw} className="mt-0.5"
+          onCheckedChange={(c) => save({ ...cfg, bandmap_lotw: !!c } as any)} />
+        <span>{t('appr.bandmapLotw')} <span className="text-xs text-muted-foreground">{t('appr.bandmapLotwHint')}</span></span>
+      </label>
+
+      {/* Banding is its own thing, above the QSL rules and outside them: it says
+          nothing about a contact, it only helps the eye keep its line across a
+          wide table. Turning the status colours off must not take it away. */}
+      <div className="space-y-2">
+        <label className="flex items-start gap-2 text-sm cursor-pointer">
+          <Checkbox checked={(cfg as any).recent_zebra !== 'off'} className="mt-0.5"
+            onCheckedChange={(c) => save({ ...cfg, recent_zebra: c ? '' : 'off' } as any)} />
+          <span>{t('appr.zebra')} <span className="text-xs text-muted-foreground">{t('appr.zebraHint')}</span></span>
+        </label>
+        {(cfg as any).recent_zebra !== 'off' && (
+          <div className="flex items-center gap-2 pl-6">
+            <span className="text-xs text-muted-foreground">{t('appr.zebraColor')}</span>
+            <input type="color" className="size-7 rounded border border-border bg-transparent p-0 cursor-pointer"
+              value={/^#[0-9a-fA-F]{6}$/.test((cfg as any).recent_zebra_color ?? '') ? (cfg as any).recent_zebra_color : '#808080'}
+              onChange={(e) => save({ ...cfg, recent_zebra_color: e.target.value } as any)} />
+            {/* Empty means "follow the theme", and there has to be a way back to
+                it — a colour chosen under one theme is wrong under the other. */}
+            {(cfg as any).recent_zebra_color && (
+              <button type="button" className="text-xs text-muted-foreground hover:text-foreground"
+                onClick={() => save({ ...cfg, recent_zebra_color: '' } as any)}>{t('appr.zebraAuto')}</button>
+            )}
+          </div>
+        )}
+      </div>
+
+      <label className="flex items-start gap-2 text-sm cursor-pointer">
+        <Checkbox checked={cfg.enabled} className="mt-0.5"
+          onCheckedChange={(c) => save({ ...cfg, enabled: !!c })} />
+        <span>{t('appr.enable')} <span className="text-xs text-muted-foreground">{t('appr.enableHint')}</span></span>
+      </label>
+
+      {cfg.enabled && (
+        <div className="space-y-3">
+          {/* Style first: it decides whether the colours below are a signal or a
+              wallpaper, which matters more than which hue they are. */}
+          <div className="flex items-center gap-3 flex-wrap">
+            <span className="text-sm">{t('appr.style')}</span>
+            <div className="inline-flex rounded-md border border-border overflow-hidden text-xs">
+              {(['bar', 'tint', 'both'] as const).map((v) => (
+                <button key={v} type="button" onClick={() => save({ ...cfg, style: v })}
+                  className={cn('px-3 py-1.5 font-medium', (cfg.style ?? 'bar') === v ? 'bg-primary text-primary-foreground' : 'text-muted-foreground hover:bg-muted')}>
+                  {t('appr.style' + v[0].toUpperCase() + v.slice(1))}
+                </button>
+              ))}
+            </div>
+            {(cfg.style ?? 'bar') !== 'bar' && (
+              <label className="flex items-center gap-2 text-sm">
+                {t('appr.intensity')}
+                <input type="range" min={5} max={45} step={1} value={cfg.intensity ?? 12}
+                  onChange={(e) => save({ ...cfg, intensity: parseInt(e.target.value, 10) })}
+                  className="w-32 accent-[var(--primary)]" />
+                <span className="font-mono text-xs text-muted-foreground w-8">{cfg.intensity ?? 12}%</span>
+              </label>
+            )}
+          </div>
+          {/* Order matters and is shown: a contact is usually several of these at
+              once, and the first match wins. */}
+          <p className="text-xs text-muted-foreground">{t('appr.orderHint')}</p>
+          {cfg.rules.map((r, i) => (
+            <div key={r.id} className="rounded-lg border border-border/60 p-2.5 space-y-2"
+              style={r.enabled ? preview(r.color) : undefined}>
+              <label className="flex items-center gap-2 text-sm cursor-pointer">
+                <Checkbox checked={r.enabled} onCheckedChange={(c) => patchRule(r.id, { enabled: !!c })} />
+                <span className="font-mono text-xs text-muted-foreground">{i + 1}.</span>
+                <span className="font-medium">{t(LABELS[r.id] ?? r.id)}</span>
+              </label>
+              {/* Which channels this category looks at. None ticked = all of
+                  them, which is what an unnarrowed rule should mean. */}
+              {r.enabled && r.id !== 'worked' && (
+                <div className="flex items-center gap-3 flex-wrap pl-6 text-xs">
+                  {CHANNELS.map((c) => {
+                    const on = !r.channels?.length || r.channels.includes(c);
+                    return (
+                      <label key={c} className="flex items-center gap-1.5 cursor-pointer">
+                        <Checkbox checked={on} onCheckedChange={(v) => {
+                          const cur = r.channels?.length ? r.channels : [...CHANNELS];
+                          const next = v ? [...new Set([...cur, c])] : cur.filter((x) => x !== c);
+                          patchRule(r.id, { channels: next });
+                        }} />
+                        {CHANNEL_LABELS[c]?.startsWith('appr.') ? t(CHANNEL_LABELS[c]) : CHANNEL_LABELS[c]}
+                      </label>
+                    );
+                  })}
+                </div>
+              )}
+              {r.enabled && (
+                <div className="flex items-center gap-1.5 flex-wrap pl-6">
+                  {PALETTE.map((c) => (
+                    <button key={c} type="button" title={c}
+                      onClick={() => patchRule(r.id, { color: c })}
+                      className={cn('size-6 rounded-md border-2 transition-transform hover:scale-110',
+                        r.color.toLowerCase() === c ? 'border-foreground' : 'border-transparent')}
+                      style={{ backgroundColor: c }} />
+                  ))}
+                  <input type="color" value={r.color} title={t('appr.custom')}
+                    onChange={(e) => patchRule(r.id, { color: e.target.value })}
+                    className="size-6 rounded-md border border-border bg-transparent p-0 cursor-pointer" />
+                </div>
+              )}
+            </div>
+          ))}
+        </div>
+      )}
+
+      <MatrixColorsSection />
+    </div>
+  );
+}

frontend/src/components/AwardEditor.tsx

@@ -1,5 +1,5 @@
 import { useCallback, useEffect, useMemo, useState } from 'react';
-import { Plus, Trash2, RotateCcw, Save, Download, Upload, Loader2, Search, FolderOpen, ArrowUpCircle } from 'lucide-react';
+import { Plus, Trash2, RotateCcw, Save, Download, Upload, Loader2, Search, FolderOpen, ArrowUpCircle, Share2 } from 'lucide-react';
 import { Dialog, DialogContent, DialogHeader, DialogTitle, DialogFooter } from '@/components/ui/dialog';
 import { Button } from '@/components/ui/button';
 import { Input } from '@/components/ui/input';
@@ -14,12 +14,12 @@ import { useI18n } from '@/lib/i18n';
 import {
   GetAwardDefs, SaveAwardDefs, ResetAwardDefs, AwardFields,
   GetAwardReferenceMeta, UpdateAwardReferenceList,
-  ListAwardReferences, SearchAwardReferences, SaveAwardReference, DeleteAwardReference,
+  ListAwardReferences, SearchAwardReferences, SaveAwardReference, DeleteAwardReference, RenameAwardReference,
   ImportAwardReferencesText, GetAwardPresets, ApplyAwardPreset,
   ListCountries, DXCCForCountry, DXCCName,
   PopulateBuiltinReferences, HasBuiltinReferences,
   ExportAwards, ImportAwards, InspectAwardImport, ApplyAwardImport, GetCatalogCodes, OpenAwardsFolder,
-  ExportAwardForCatalog,
+  ExportAwardForCatalog, ExportAward,
   GetAwardUpdates, ApplyAwardUpdate, DismissAwardUpdate, ExplainAward,
 } from '../../wailsjs/go/main/App';
 
@@ -34,10 +34,13 @@ export type AwardDef = {
   url?: string; download_url?: string; ref_url?: string; valid_from?: string; valid_to?: string; alias?: string;
   ref_display?: string; // grid column shows: ref | name | both
   type?: string; field: string; match_by?: string; exact_match?: boolean; one_ref_per_qso?: boolean; pattern: string;
-  leading_str?: string; trailing_str?: string; dynamic?: boolean;
+  leading_str?: string; trailing_str?: string; prefix?: string; dynamic?: boolean;
   or_rules?: AwardOrRule[];
   dxcc_filter: number[] | null; valid_bands?: string[]; valid_modes?: string[]; emission?: string[];
   confirm: string[] | null; validate?: string[] | null; grant_codes?: string; export_credit_granted?: boolean;
+  // The "custom" confirmation source: the field it reads and, optionally, the
+  // value(s) that count. Empty value = any non-empty value confirms.
+  confirm_field?: string; confirm_value?: string;
   total: number; builtin?: boolean; version?: number;
 };
 
@@ -59,9 +62,14 @@ type Preset = { key: string; name: string; field: string; dxcc: number; refs: Aw
 // organizational only; matching is driven by the field/pattern/dynamic options,
 // so there's no need for separate GRID/DXCC types (use QSOFIELDS + the field).
 const AWARD_TYPES = ['REFERENCE', 'QSOFIELDS', 'CALLSIGN'];
+// Sentinel for "no QSO field at all". The definition stores an empty field, and
+// the matcher already treats that as "nothing to scan" — this only gives the
+// operator a way to ASK for it.
+const NO_FIELD = '__none__';
 const CONFIRM_SRC = [
   { id: 'lotw', label: 'LoTW' }, { id: 'qsl', label: 'QSL' }, { id: 'eqsl', label: 'eQSL' },
-  { id: 'qrzcom', label: 'QRZ.com' }, { id: 'custom', label: 'Custom' },
+  { id: 'qrzcom', label: 'QRZ.com' }, { id: 'hamlog', label: 'HAMLOG.online' },
+  { id: 'custom', label: 'Custom' },
 ];
 const BANDS = ['2190m','630m','160m','80m','60m','40m','30m','20m','17m','15m','12m','10m','6m','4m','2m','1.25m','70cm','33cm','23cm','13cm','9cm','6cm','3cm','1.25cm','6mm','4mm','2.5mm','2mm','1mm'];
 const MODES = ['CW','SSB','USB','LSB','AM','FM','RTTY','PSK31','FT8','FT4','JT65','JT9','MFSK','OLIVIA','DIGITALVOICE'];
@@ -94,6 +102,13 @@ function Chips({ all, value, onToggle }: { all: string[]; value: string[]; onTog
   );
 }
 
+// Awards use a far-future date as "no end" (RDA carries 9999-12-31). Printing it
+// back at the operator reads like a real deadline, so show it as open-ended.
+function openEnded(d?: string): string {
+  if (!d) return '—';
+  return /^9\d{3}-/.test(d) ? '—' : d;
+}
+
 function Field2({ label, children }: { label: string; children: React.ReactNode }) {
   return (
     <div className="grid grid-cols-[120px_1fr] items-center gap-2">
@@ -267,6 +282,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
     }
     return groups;
   }, [testRows]);
+  const noField = !String(cur?.field ?? '').trim();
   const patch = (p: Partial<AwardDef>) => setDefs((ds) => ds.map((d, j) => (j === sel ? { ...d, ...p } : d)));
   const toggleIn = (key: keyof AwardDef, v: string) => {
     const arr = ((cur?.[key] as string[]) ?? []);
@@ -304,6 +320,23 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
       if (p) setErr(t('awed.exportedTo', { path: p }));
     } catch (e: any) { setErr(String(e?.message ?? e)); }
   }
+  // Export the SELECTED award on its own — the unit you actually share. The
+  // bundle above is a backup: sending it to someone hands over your whole
+  // catalogue when they asked for one award.
+  //
+  // Distinct from the catalog publish below, which is for shipping an award INTO
+  // OpsLog: that one stamps a version and clears user_edited. This one is a plain
+  // share and leaves both alone, so the recipient's copy is correctly marked as
+  // someone else's work rather than as a pristine built-in.
+  async function exportOne() {
+    setErr('');
+    if (!cur) return;
+    try {
+      const code = cur.code.trim().toUpperCase();
+      const p = await ExportAward(code);
+      if (p) setErr(t('awed.exportedOneTo', { code, path: p }));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
+  }
   // Export the SELECTED award as a catalog-ready JSON, stamped with a version, to
   // paste over internal/award/catalog/<code>.json. A new release then ships it to
   // the whole team (unedited copies auto-upgrade; edited ones are offered it).
@@ -539,11 +572,30 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                     <div className="border-t pt-2.5 mt-1 space-y-2.5">
                       <p className="text-[11px] text-muted-foreground">{t('awed.qsoParams')}</p>
                       <Field2 label={t('awed.searchInField')}>
-                        <Select value={cur.field} onValueChange={(v) => patch({ field: v })}>
+                        {/* NO_FIELD is a sentinel because the stored value is the
+                            empty string and a Select cannot carry one — an empty
+                            item value means "show the placeholder" to Radix. */}
+                        {/* Picking "no field" clears the fallbacks too: it promises that
+                            nothing is matched automatically, and an OR rule left behind goes
+                            on scanning its own field — worse than a visible one, because the
+                            panel stops showing it. */}
+                        <Select value={cur.field || NO_FIELD}
+                          onValueChange={(v) => patch(v === NO_FIELD ? { field: '', or_rules: [] } : { field: v })}>
                           <SelectTrigger className="h-8 text-xs w-56"><SelectValue /></SelectTrigger>
-                          <SelectContent className="max-h-72">{fields.map((f) => <SelectItem key={f} value={f}>{f}</SelectItem>)}</SelectContent>
+                          <SelectContent className="max-h-72">
+                            <SelectItem value={NO_FIELD}>{t('awed.fieldNone')}</SelectItem>
+                            {fields.map((f) => <SelectItem key={f} value={f}>{f}</SelectItem>)}
+                          </SelectContent>
                         </Select>
                       </Field2>
+                      {/* An award whose references live in no ADIF field at all —
+                          WWBOTA has no column anywhere — has nothing to match on,
+                          and every control below would be a question with no
+                          answer. Hiding them is the point: the references are the
+                          ones the operator assigns to a QSO by hand. */}
+                      {noField ? (
+                        <p className="text-[11px] text-muted-foreground pl-[128px]">{t('awed.fieldNoneHint')}</p>
+                      ) : (<>
                       <Field2 label={t('awed.matchBy')}>
                         <div className="flex items-center gap-3 text-xs">
                           {['code', 'description', 'pattern'].map((m) => (
@@ -556,15 +608,23 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                       <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]"><Checkbox checked={!!cur.exact_match} onCheckedChange={(c) => patch({ exact_match: !!c })} /> {t('awed.exactMatch')}</label>
                       <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]" title={t('awed.oneRefHint')}><Checkbox checked={!!cur.one_ref_per_qso} onCheckedChange={(c) => patch({ one_ref_per_qso: !!c })} /> {t('awed.oneRef')}</label>
                       <Field2 label={t('awed.patternRegex')}><Input className="h-8 font-mono text-xs" value={cur.pattern} onChange={(e) => patch({ pattern: e.target.value })} placeholder={t('awed.patternPlaceholder')} /></Field2>
-                      <div className="grid grid-cols-2 gap-3">
+                      <div className="grid grid-cols-3 gap-3">
                         <Field2 label={t('awed.leadingString')}><Input className="h-8 font-mono text-xs" value={cur.leading_str ?? ''} onChange={(e) => patch({ leading_str: e.target.value })} /></Field2>
                         <Field2 label={t('awed.trailingString')}><Input className="h-8 font-mono text-xs" value={cur.trailing_str ?? ''} onChange={(e) => patch({ trailing_str: e.target.value })} /></Field2>
+                        <Field2 label={t('awed.prefix')}><Input className="h-8 font-mono text-xs" value={cur.prefix ?? ''} onChange={(e) => patch({ prefix: e.target.value })} placeholder={t('awed.prefixPlaceholder')} title={t('awed.prefixTitle')} /></Field2>
                       </div>
 
+                      </>)}
                       {/* Fallback searches: tried in order, only while nothing
                           has matched yet — the first that hits wins (short-circuit),
                           so a value already resolved by the primary rule isn't
-                          re-derived differently by a later one. */}
+                          re-derived differently by a later one.
+                          
+                          Shown even with no field when rules survive from an
+                          imported definition: a rule that still runs must still
+                          be visible, or the award finds references the panel
+                          says it cannot. */}
+                      {(!noField || (cur.or_rules?.length ?? 0) > 0) && (
                       <div className="border-t pt-2.5 space-y-2">
                         <div className="flex items-center justify-between">
                           <p className="text-[11px] text-muted-foreground">{t('awed.additionalSearches')} <span className="font-semibold">(OR)</span> {t('awed.orAlsoMatch')}</p>
@@ -602,6 +662,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                           );
                         })}
                       </div>
+                      )}
                     </div>
                   </TabsContent>
 
@@ -621,6 +682,30 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                         ))}
                       </div>
                     </div>
+
+                    {/* "Custom" is only meaningful once it names a field, so the
+                        inputs appear as soon as it is ticked in either column —
+                        and a custom source with no field confirms nothing. */}
+                    {((cur.confirm ?? []).includes('custom') || (cur.validate ?? []).includes('custom')) && (
+                      <div className="space-y-2 border-t border-border/60 pt-3">
+                        <Label className="text-xs font-semibold">{t('awed.customLabel')}</Label>
+                        <div className="grid grid-cols-2 gap-3">
+                          <div className="space-y-1">
+                            <Label className="text-[11px] text-muted-foreground">{t('awed.customField')}</Label>
+                            <Input className="h-8 font-mono text-xs" placeholder="APP_OPSLOG_QSL_RCVD"
+                              value={(cur as any).confirm_field ?? ''}
+                              onChange={(e) => patch({ confirm_field: e.target.value.trim().toUpperCase() } as any)} />
+                          </div>
+                          <div className="space-y-1">
+                            <Label className="text-[11px] text-muted-foreground">{t('awed.customValue')}</Label>
+                            <Input className="h-8 font-mono text-xs" placeholder="Y,V"
+                              value={(cur as any).confirm_value ?? ''}
+                              onChange={(e) => patch({ confirm_value: e.target.value } as any)} />
+                          </div>
+                        </div>
+                        <p className="text-[11px] text-muted-foreground leading-relaxed">{t('awed.customHint')}</p>
+                      </div>
+                    )}
                     {/* "Grant codes" and "export credit_granted" used to live here. No
                         ADIF export has ever written CREDIT_GRANTED, so both controls
                         did nothing at all. The stored values are kept (see award.Def);
@@ -733,6 +818,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                   <TabsContent value="refs" className="mt-0">
                     <ReferencesPanel
                       code={cur.code.trim().toUpperCase()} presets={presets} meta={meta[cur.code.toUpperCase()]}
+                      awardValidFrom={cur.valid_from} awardValidTo={cur.valid_to}
                       onUpdateOnline={() => updateList(cur.code.toUpperCase())} updating={updating === cur.code.toUpperCase()}
                       onChanged={loadMeta} setErr={setErr}
                     />
@@ -752,6 +838,14 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
           <Button variant="outline" onClick={exportAwards} title={t('awed.exportTitle')}>
             <Download className="size-3.5 mr-1" /> {t('awed.export')}
           </Button>
+          {/* Share just the selected one. Sitting next to the whole-catalogue
+              export because that is where an operator looks for it, and labelled
+              with the code so the two are never confused at a glance. */}
+          {cur && (
+            <Button variant="outline" onClick={exportOne} title={t('awed.exportOneTitle')}>
+              <Share2 className="size-3.5 mr-1" /> {t('awed.exportOne', { code: cur.code.trim().toUpperCase() })}
+            </Button>
+          )}
           <Button variant="outline" onClick={importAwards} title={t('awed.importTitle')}>
             <Upload className="size-3.5 mr-1" /> {t('awed.import')}
           </Button>
@@ -846,14 +940,18 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
 // ReferencesPanel — manage the reference list of one award: search/list on the
 // left, a per-reference editor on the right, plus bulk paste/CSV, presets and
 // the online updater (POTA/SOTA/WWFF).
-function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChanged, setErr }: {
+function ReferencesPanel({ code, presets, meta, awardValidFrom, awardValidTo, onUpdateOnline, updating, onChanged, setErr }: {
-  code: string; presets: Preset[]; meta?: RefMeta;
+  code: string; presets: Preset[]; meta?: RefMeta; awardValidFrom?: string; awardValidTo?: string;
   onUpdateOnline: () => void; updating: boolean; onChanged: () => void; setErr: (s: string) => void;
 }) {
   const { t } = useI18n();
   const [refs, setRefs] = useState<AwardRef[]>([]);
   const [q, setQ] = useState('');
   const [selCode, setSelCode] = useState<string | null>(null);
+  // The code as TYPED. The list and every patch key off selCode, so editing the
+  // code in place would make the editor lose the reference mid-edit; the draft
+  // is applied as a rename when the operator saves.
+  const [codeDraft, setCodeDraft] = useState('');
   const [busy, setBusy] = useState(false);
   const [bulk, setBulk] = useState('');
   const [showBulk, setShowBulk] = useState(false);
@@ -891,6 +989,7 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
   }
 
   const sel = refs.find((r) => r.code === selCode) || null;
+  useEffect(() => { setCodeDraft(selCode ?? ''); }, [selCode]);
   // Large lists are already filtered by the server; small lists filter locally.
   const filtered = useMemo(() => {
     if (large) return refs;
@@ -904,6 +1003,27 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
     try { await SaveAwardReference(code, r as any); load(); onChanged(); }
     catch (e: any) { setErr(String(e?.message ?? e)); }
   }
+  // Save the selected reference, renumbering it first when the code was edited.
+  //
+  // The rename has to come first and has to be a rename: saving under the new
+  // code would simply create a second reference and leave the old one behind,
+  // which is how a list quietly grows duplicates.
+  async function saveSelected(r: AwardRef) {
+    const next = codeDraft.trim().toUpperCase();
+    if (!next) { setErr(t('awed.refCodeEmpty')); return; }
+    if (next !== r.code) {
+      try {
+        await RenameAwardReference(code, r.code, next);
+      } catch (e: any) {
+        // Most often the number is already taken by another reference. Said
+        // here rather than swallowed: the save has NOT happened.
+        setErr(String(e?.message ?? e));
+        return;
+      }
+      setSelCode(next);
+    }
+    await saveRef({ ...r, code: next });
+  }
   async function addRef() {
     const c = prompt(t('awed.newRefCodePrompt'))?.trim().toUpperCase();
     if (!c) return;
@@ -985,7 +1105,13 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
           ) : (
             <div className="space-y-2">
               <div className="flex items-center gap-2">
-                <Input className="h-8 w-28 font-mono font-semibold" value={sel.code} readOnly />
+                {/* Editable, because a shipped list can be wrong about it: WAJA
+                    went out carrying Japan's civil prefecture numbers instead of
+                    the JARL's, and correcting that meant deleting all 47
+                    references and importing a new list. */}
+                <Input className="h-8 w-28 font-mono font-semibold" value={codeDraft}
+                  title={t('awed.refCodeTip')}
+                  onChange={(e) => setCodeDraft(e.target.value)} />
                 <label className="flex items-center gap-1.5 text-xs cursor-pointer"><Checkbox checked={sel.valid} onCheckedChange={(c) => patchSel({ valid: !!c })} /> {t('awed.valid')}</label>
                 <div className="flex-1" />
                 <button className="text-muted-foreground hover:text-destructive" onClick={() => delRef(sel.code)}><Trash2 className="size-4" /></button>
@@ -1003,7 +1129,27 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
                   third-party list may carry the values — but they are not offered
                   for editing until something actually reads them. */}
               <Field2 label={t('awed.grid')}><Input className="h-8 font-mono" value={sel.gridsquare ?? ''} onChange={(e) => patchSel({ gridsquare: e.target.value })} /></Field2>
-              <div className="flex justify-end pt-1"><Button size="sm" className="h-7" onClick={() => sel && saveRef(sel)}><Save className="size-3.5 mr-1" /> {t('awed.saveReference')}</Button></div>
+              {/* This reference's own validity window. A reference is not forever:
+                  a park is delisted, a district merged. A QSO made while it
+                  existed still counts — it was a valid contact on the day — and
+                  one made afterwards does not.
+                  Left empty the award's own dates govern, which is why they show
+                  as the placeholder: the operator can see what "empty" inherits
+                  instead of having to remember. */}
+              <Field2 label={t('awed.refValidFrom')}>
+                <Input type="date" className="h-8 w-44" value={sel.valid_from ?? ''}
+                  onChange={(e) => patchSel({ valid_from: e.target.value })} />
+              </Field2>
+              <Field2 label={t('awed.refValidTo')}>
+                <Input type="date" className="h-8 w-44" value={sel.valid_to ?? ''}
+                  onChange={(e) => patchSel({ valid_to: e.target.value })} />
+              </Field2>
+              <p className="text-xs text-muted-foreground">
+                {(awardValidFrom || awardValidTo)
+                  ? t('awed.refValidHintAward', { from: openEnded(awardValidFrom), to: openEnded(awardValidTo) })
+                  : t('awed.refValidHint')}
+              </p>
+              <div className="flex justify-end pt-1"><Button size="sm" className="h-7" onClick={() => sel && saveSelected(sel)}><Save className="size-3.5 mr-1" /> {t('awed.saveReference')}</Button></div>
             </div>
           )}
         </div>

frontend/src/components/AwardRefSelector.tsx

@@ -1,6 +1,6 @@
 import { useEffect, useMemo, useState } from 'react';
 import { X, Plus, Loader2 } from 'lucide-react';
-import { SearchAwardReferences, GetAwardDefs, GetAwardReferenceMeta } from '../../wailsjs/go/main/App';
+import { SearchAwardReferences, GetAwardDefs, GetAwardReferenceMeta, AwardRefsNew } from '../../wailsjs/go/main/App';
 import {
   Select, SelectTrigger, SelectValue, SelectContent, SelectItem,
 } from '@/components/ui/select';
@@ -54,6 +54,34 @@ export function AwardRefSelector({ dxcc, value, onChange, fieldValues, heightCla
 
   const entries = value ? value.split(';').filter(Boolean) : [];
 
+  // Which of the picked references have never been worked. Asked of the backend
+  // only when the list of references actually changes — a handful of times per
+  // QSO — and it answers from an in-memory set (see awardnew.go).
+  //
+  // The first question about an award may arrive before its set is built, in
+  // which case the answer is "pending" and carries no verdict for it: we ask
+  // again rather than badge on a guess. Attempts are capped so a logbook that
+  // never finishes building cannot leave a timer running for the session.
+  const [isNew, setIsNew] = useState<Record<string, boolean>>({});
+  const entriesKey = entries.join(';');
+  useEffect(() => {
+    if (!entriesKey) { setIsNew({}); return; }
+    let alive = true;
+    let timer: number | undefined;
+    let tries = 0;
+    const ask = () => {
+      AwardRefsNew(entriesKey.split(';'))
+        .then((r: any) => {
+          if (!alive) return;
+          setIsNew(r?.new ?? {});
+          if (r?.pending && ++tries < 10) timer = window.setTimeout(ask, 700);
+        })
+        .catch(() => { if (alive) setIsNew({}); }); // no badge beats a wrong one
+    };
+    ask();
+    return () => { alive = false; if (timer) window.clearTimeout(timer); };
+  }, [entriesKey]);
+
   // When the reference set is cleared (a QSO was logged or the call was reset),
   // also blank the picker's own state — the search box and the highlighted /
   // selected reference — so the Awards tab starts fresh for the next contact.
@@ -256,7 +284,16 @@ export function AwardRefSelector({ dxcc, value, onChange, fieldValues, heightCla
                 }`}
                 onClick={() => setSelectedEntry(selectedEntry === entry ? null : entry)}
               >
-                <span className="font-mono font-semibold flex-1 truncate">{entry}</span>
+                <span className="font-mono font-semibold truncate">{entry}</span>
+                {isNew[entry] && (
+                  <span
+                    title={t('awrs.newRefHint')}
+                    className="shrink-0 px-1 rounded-sm text-[9px] leading-[14px] font-semibold tracking-wide bg-success-muted text-success border border-success-border"
+                  >
+                    {t('awrs.new')}
+                  </span>
+                )}
+                <span className="flex-1" />
                 <button
                   className="shrink-0 hover:text-destructive"
                   onClick={(e) => { e.stopPropagation(); removeEntry(entry); }}

frontend/src/components/AwardsPanel.tsx

@@ -1,11 +1,13 @@
 import { useEffect, useMemo, useState } from 'react';
 import { Award as AwardIcon, RefreshCw, Loader2, Search, Pencil, X, Grid3x3, List, BarChart3, AlertTriangle, ChevronUp, ChevronDown } from 'lucide-react';
-import { GetAwardDefs, GetAward, AwardCellQSOs, GetAwardStats, AwardMissingQSOs, ListAwardReferences, AssignAwardRefToQSOs, RescanAwards } from '../../wailsjs/go/main/App';
+import { GetAwardDefs, GetAward, AwardCellQSOs, GetAwardStats, AwardMissingQSOs, ListAwardReferences, AssignAwardRefToQSOs, RescanAwards, GetTrackedAwards } from '../../wailsjs/go/main/App';
+import { EventsOn } from '../../wailsjs/runtime/runtime';
 import { Input } from '@/components/ui/input';
 import { Button } from '@/components/ui/button';
 import { Checkbox } from '@/components/ui/checkbox';
 import { Select, SelectTrigger, SelectValue, SelectContent, SelectItem } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
+import { isQSLConfirmed } from '@/lib/qsl';
 import { AwardEditor } from '@/components/AwardEditor';
 import { useI18n } from '@/lib/i18n';
 import { writeUiPref } from '@/lib/uiPref';
@@ -62,9 +64,15 @@ function ProgressBar({ worked, confirmed, total }: { worked: number; confirmed:
   );
 }
 
-type AwardListItem = { code: string; name: string; valid?: boolean; bands?: string[]; emission?: string[] };
+// scoped: the award is limited to one or more DXCC entities. Missing-reference
+// detection only means anything for those — see the Missing refs button.
+type AwardListItem = { code: string; name: string; valid?: boolean; bands?: string[]; emission?: string[]; scoped?: boolean };
 
-export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: number) => void; onAwardsChanged?: () => void } = {}) {
+export function AwardsPanel({ onEditQSO, onAwardsChanged, onPaperQSL }: {
+  onEditQSO?: (id: number) => void;
+  onAwardsChanged?: () => void;
+  onPaperQSL?: (call: string) => void;
+} = {}) {
   const { t } = useI18n();
   const [awardList, setAwardList] = useState<AwardListItem[]>([]);
   // Computed results are cached per award code — each award is scanned only the
@@ -137,13 +145,20 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
     }
   }
 
-  // Load the award list (no QSO scan), then compute only the first award.
+  // Load the award list (no QSO scan), then compute only the first award. The
+  // list is narrowed to the awards the operator follows (Settings → Awards); an
+  // empty follow-set means "show them all" so the tab is never blank.
   async function loadList() {
     try {
-      const defs = ((await GetAwardDefs()) ?? []) as any[];
+      const [defs, tracked] = await Promise.all([
-      const list: AwardListItem[] = defs
+        GetAwardDefs().then((d) => (d ?? []) as any[]),
-        .map((d) => ({ code: d.code, name: d.name, valid: d.valid, bands: d.valid_bands ?? [], emission: d.emission ?? [] }))
+        GetTrackedAwards().then((t) => (t ?? []) as string[]).catch(() => [] as string[]),
+      ]);
+      const follow = new Set(tracked);
+      let list: AwardListItem[] = defs
+        .map((d) => ({ code: d.code, name: d.name, valid: d.valid, bands: d.valid_bands ?? [], emission: d.emission ?? [], scoped: (d.dxcc_filter ?? []).length > 0 }))
         .sort((a, b) => a.code.localeCompare(b.code));
+      if (follow.size > 0) list = list.filter((a) => follow.has(a.code));
       setAwardList(list);
       const first = list.find((a) => a.code === selected) ?? list[0];
       if (first) compute(first.code);
@@ -152,6 +167,12 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
     }
   }
   useEffect(() => { loadList(); }, []);
+  // Re-filter when the operator changes their followed awards in Settings.
+  useEffect(() => {
+    const off = EventsOn('awards:tracked-changed', () => { loadList(); });
+    return () => { off(); };
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, []);
 
   const current = byCode[`${selected}|${modeFilter}`];
   // Recompute when the mode class changes: the bands, counts and confirmations
@@ -211,11 +232,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   // Alicante" — which reference order scatters across the whole table.
   // Remembered through writeUiPref rather than localStorage, so the choice
   // travels with a copied data/ folder like every other UI preference here.
-  const [refSort, setRefSort] = useState<'ref' | 'name'>(
+  const [refSort, setRefSort] = useState<'ref' | 'name' | 'group'>(
-    () => (localStorage.getItem('opslog.awardRefSort') === 'name' ? 'name' : 'ref'));
+    () => {
+      const v = localStorage.getItem('opslog.awardRefSort');
+      return v === 'name' || v === 'group' ? v : 'ref';
+    });
   const [refSortDir, setRefSortDir] = useState<'asc' | 'desc'>(
     () => (localStorage.getItem('opslog.awardRefSortDir') === 'desc' ? 'desc' : 'asc'));
-  const toggleRefSort = (k: 'ref' | 'name') => {
+  const toggleRefSort = (k: 'ref' | 'name' | 'group') => {
     if (k === refSort) {
       const d = refSortDir === 'asc' ? 'desc' : 'asc';
       setRefSortDir(d);
@@ -258,10 +282,26 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
         if (c !== 0) return c * dir;
         return a.ref.localeCompare(b.ref) * dir; // stable tie-break
       }
+      if (refSort === 'group') {
+        // Prefix order (XE, YV, ZL…) — how a DX operator actually thinks about
+        // entities. Blank prefixes sink to the bottom regardless of direction,
+        // so an unresolved entity never heads the list.
+        const ag = a.group ?? '', bg = b.group ?? '';
+        if (!ag !== !bg) return ag ? -1 : 1;
+        const c = ag.localeCompare(bg, undefined, { sensitivity: 'base' });
+        if (c !== 0) return c * dir;
+        return a.ref.localeCompare(b.ref, undefined, { numeric: true }) * dir;
+      }
       return a.ref.localeCompare(b.ref, undefined, { numeric: true }) * dir;
     });
   }, [current, refSearch, refFilter, modeFilter, refSort, refSortDir]);
 
+  // The group column earns its width only when the list actually carries one
+  // (DXCC prefixes, POTA locations); most custom lists have none. For DXCC the
+  // value IS the primary prefix, so it is labelled as such.
+  const hasGroup = useMemo(() => filteredRefs.some((r) => !!r.group), [filteredRefs]);
+  const groupColLabel = current && current.code.toUpperCase() === 'DXCC' ? t('awp.prefixCol') : t('awp.groupCol');
+
   return (
     <div className="flex h-full min-h-0">
       {/* Award list */}
@@ -393,6 +433,13 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                 ))}
               </div>
               <span className="text-xs text-muted-foreground">{filteredRefs.length} {t('awp.refs')}</span>
+              {/* Only for an award scoped to a DXCC entity. "In this award's
+                  scope but with no reference" needs a scope to be in: on a
+                  worldwide reference award — POTA, SOTA, IOTA, WWFF — every
+                  contact anywhere would qualify, so the answer is always none.
+                  The button used to be there regardless and could only ever
+                  open a window saying it had found nothing. */}
+              {awardList.find((a) => a.code === selected)?.scoped && (
                 <button
                   onClick={() => setShowMissing(true)}
                   className="flex items-center gap-1 text-xs text-warning-muted-foreground hover:text-warning border border-warning-border bg-warning-muted rounded px-2 py-1"
@@ -400,6 +447,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                 >
                   <AlertTriangle className="size-3" /> {t('awp.missingRefs')}
                 </button>
+              )}
               <div className="flex-1" />
               {/* Legend */}
               <div className="flex items-center gap-2 text-[10px] text-muted-foreground">
@@ -459,6 +507,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                           {refSort === 'ref' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
                         </button>
                       </th>
+                      {hasGroup && (
+                        <th className="text-left py-1.5 pr-3 font-medium border-b border-border w-20">
+                          <button type="button" onClick={() => toggleRefSort('group')} className="inline-flex items-center gap-1 hover:text-foreground">
+                            {groupColLabel}
+                            {refSort === 'group' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                          </button>
+                        </th>
+                      )}
                       <th className="text-left py-1.5 pr-3 font-medium border-b border-border">
                         <button type="button" onClick={() => toggleRefSort('name')} className="inline-flex items-center gap-1 hover:text-foreground">
                           {t('awp.description')}
@@ -474,9 +530,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                     {filteredRefs.map((r) => (
                       <tr key={r.ref} className={cn('hover:bg-accent/20', !r.worked && 'opacity-60')}>
                         <td className="sticky left-0 bg-card hover:bg-accent/20 py-1 pr-2 font-mono font-semibold border-b border-border/30">{r.ref}</td>
-                        <td className="py-1 pr-3 text-muted-foreground truncate max-w-[360px] border-b border-border/30">
+                        {hasGroup && (
-                          {r.name}{r.group ? <span className="text-muted-foreground/60"> · {r.group}</span> : ''}
+                          <td className="py-1 pr-3 font-mono font-semibold border-b border-border/30">{r.group}</td>
-                        </td>
+                        )}
+                        <td className="py-1 pr-3 text-muted-foreground truncate max-w-[360px] border-b border-border/30">{r.name}</td>
                         {gridBands.map((b) => {
                           const s = cellStatus(r, b);
                           return (
@@ -513,7 +570,12 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                           {refSort === 'name' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
                         </button>
                       </th>
-                      <th className="py-1.5 pr-2 font-medium w-40">{t('awp.groupCol')}</th>
+                      <th className="py-1.5 pr-2 font-medium w-40">
+                        <button type="button" onClick={() => toggleRefSort('group')} className="inline-flex items-center gap-1 hover:text-foreground">
+                          {groupColLabel}
+                          {refSort === 'group' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                        </button>
+                      </th>
                       <th className="py-1.5 pr-2 font-medium w-24">{t('awp.status')}</th>
                       <th className="py-1.5 font-medium">{t('awp.bands')}</th>
                     </tr>
@@ -546,7 +608,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
       </div>
 
       {cell && current && (
-        <CellQSOModal code={current.code} cell={cell} modeClass={modeFilter === 'all' ? '' : modeFilter} onClose={() => setCell(null)} />
+        <CellQSOModal code={current.code} cell={cell} modeClass={modeFilter === 'all' ? '' : modeFilter} onClose={() => setCell(null)} onPaperQSL={onPaperQSL} />
       )}
       {showMissing && current && (
         <MissingQSOModal code={current.code} name={current.name} onClose={() => setShowMissing(false)} onEditQSO={onEditQSO} />
@@ -560,6 +622,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
 // the missing reference (e.g. a department for DDFM).
 type MissingSortKey = 'qso_date' | 'callsign' | 'band' | 'mode' | 'country' | 'qth';
 
+// How many references the assign dropdown will put in the DOM at once. Above
+// this a search box appears beside it and the rest are held back, counted.
+const REF_MENU_MAX = 300;
+
 function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; name: string; onClose: () => void; onEditQSO?: (id: number) => void }) {
   const { t } = useI18n();
   const [qsos, setQsos] = useState<any[]>([]);
@@ -568,6 +634,7 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
   const [sortKey, setSortKey] = useState<MissingSortKey>('callsign');
   const [sortDir, setSortDir] = useState<'asc' | 'desc'>('asc');
   const [refs, setRefs] = useState<Array<{ code: string; name: string }>>([]);
+  const [refSearch, setRefSearch] = useState('');
   const [assignRef, setAssignRef] = useState('');
   const [busy, setBusy] = useState(false);
   const [msg, setMsg] = useState('');
@@ -581,12 +648,38 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
       .finally(() => setLoading(false));
   };
   useEffect(() => { load(); }, [code]);
-  // The award's reference list drives the "assign" dropdown (e.g. China provinces).
+  // The award's reference list drives the "assign" dropdown (e.g. China
+  // provinces) — fetched ONLY once there is something to assign it to.
+  //
+  // Missing-reference detection needs a DXCC scope, so a worldwide award like
+  // POTA always has zero rows here and says so. It was still loading every
+  // reference behind that message: on a log with the full POTA park list
+  // imported, tens of thousands of them, feeding a dropdown that could not be
+  // used for anything. That is the window freezing on a screen with nothing to
+  // offer.
   useEffect(() => {
+    if (loading || qsos.length === 0) { setRefs([]); return; }
     ListAwardReferences(code)
       .then((r) => setRefs(((r ?? []) as any[]).map((x) => ({ code: String(x.code).toUpperCase(), name: String(x.name ?? '') }))))
       .catch(() => setRefs([]));
-  }, [code]);
+  }, [code, loading, qsos.length]);
+
+  // What the assign dropdown actually renders. Bounded, and it says how many it
+  // is holding back rather than silently showing the first few hundred.
+  const shownRefs = useMemo(() => {
+    const q = refSearch.trim().toUpperCase();
+    const rows = q
+      ? refs.filter((r) => r.code.includes(q) || r.name.toUpperCase().includes(q))
+      : refs;
+    return rows.slice(0, REF_MENU_MAX);
+  }, [refs, refSearch]);
+  const hiddenRefs = useMemo(() => {
+    const q = refSearch.trim().toUpperCase();
+    const total = q
+      ? refs.filter((r) => r.code.includes(q) || r.name.toUpperCase().includes(q)).length
+      : refs.length;
+    return Math.max(0, total - shownRefs.length);
+  }, [refs, refSearch, shownRefs.length]);
 
   const qthOf = (q: any) => String(q.qth || q.notes || '');
   const sorted = useMemo(() => {
@@ -663,14 +756,29 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
         {/* Bulk-assign toolbar */}
         <div className="flex items-center gap-2 px-4 py-2 border-b border-border/50 bg-muted/20">
           <span className="text-xs text-muted-foreground">{t('awp.selectedArrow', { n: sel.size })}</span>
+          {/* A search box beside the dropdown, and a bounded list inside it.
+              A reference list can hold tens of thousands of entries (POTA
+              parks, Russian districts); every one of them as a menu item is
+              hundreds of thousands of DOM nodes and a window that stops
+              answering. Nobody scrolls to K-4521 anyway — they type it. */}
+          {refs.length > REF_MENU_MAX && (
+            <Input className="h-7 w-40 text-xs font-mono" value={refSearch}
+              placeholder={t('awp.filterReferences')}
+              onChange={(e) => setRefSearch(e.target.value)} />
+          )}
           <Select value={assignRef} onValueChange={setAssignRef}>
             <SelectTrigger className="h-7 w-64 text-xs"><SelectValue placeholder={t('awp.chooseReference')} /></SelectTrigger>
             <SelectContent className="max-h-72">
-              {refs.map((r) => (
+              {shownRefs.map((r) => (
                 <SelectItem key={r.code} value={r.code}>
                   <span className="font-mono font-semibold">{r.code}</span>{r.name ? <span className="text-muted-foreground"> · {r.name}</span> : ''}
                 </SelectItem>
               ))}
+              {hiddenRefs > 0 && (
+                <div className="px-2 py-1.5 text-[11px] text-muted-foreground">
+                  {t('awp.refsNarrow', { n: hiddenRefs })}
+                </div>
+              )}
             </SelectContent>
           </Select>
           <Button size="sm" disabled={!assignRef || sel.size === 0 || busy} onClick={applyAssign}>
@@ -731,7 +839,14 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
 }
 
 // CellQSOModal lists the QSOs behind one award-grid cell (reference × band).
-function CellQSOModal({ code, cell, modeClass, onClose }: { code: string; cell: { ref: string; band: string; name?: string }; modeClass: string; onClose: () => void }) {
+function CellQSOModal({ code, cell, modeClass, onClose, onPaperQSL }: {
+  code: string; cell: { ref: string; band: string; name?: string }; modeClass: string;
+  onClose: () => void;
+  // Send this callsign to the QSL Manager's Paper QSL view. Chasing a
+  // confirmation starts here — an unconfirmed entity, the contact behind it —
+  // and used to continue by retyping the callsign into another tab.
+  onPaperQSL?: (call: string) => void;
+}) {
   const { t } = useI18n();
   const [qsos, setQsos] = useState<any[]>([]);
   const [loading, setLoading] = useState(true);
@@ -768,10 +883,18 @@ function CellQSOModal({ code, cell, modeClass, onClose }: { code: string; cell:
                 {qsos.map((q, i) => (
                   <tr key={q.id ?? i} className="border-b border-border/30">
                     <td className="py-1 px-3 font-mono">{fmt(q.qso_date)}</td>
-                    <td className="py-1 pr-2 font-mono font-semibold">{q.callsign}</td>
+                    <td className="py-1 pr-2 font-mono font-semibold">
+                      {onPaperQSL ? (
+                        <button type="button" className="hover:underline text-primary"
+                          title={t('awp.paperQslTip')}
+                          onClick={() => { onPaperQSL(String(q.callsign ?? '')); onClose(); }}>
+                          {q.callsign}
+                        </button>
+                      ) : q.callsign}
+                    </td>
                     <td className="py-1 pr-2">{q.band}</td>
                     <td className="py-1 pr-2">{q.mode}</td>
-                    <td className="py-1 pr-3 text-muted-foreground">{[q.lotw_rcvd === 'Y' && 'LoTW', q.qsl_rcvd === 'Y' && 'QSL', q.eqsl_rcvd === 'Y' && 'eQSL'].filter(Boolean).join(', ')}</td>
+                    <td className="py-1 pr-3 text-muted-foreground">{[isQSLConfirmed(q.lotw_rcvd) && 'LoTW', isQSLConfirmed(q.qsl_rcvd) && 'QSL', isQSLConfirmed(q.eqsl_rcvd) && 'eQSL'].filter(Boolean).join(', ')}</td>
                   </tr>
                 ))}
               </tbody>

frontend/src/components/BandMap.tsx

@@ -1,8 +1,11 @@
-import { useEffect, useMemo, useRef, useState } from 'react';
+import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import { Minus, Plus, Crosshair, X, PanelLeft, PanelRight } from 'lucide-react';
 import { cn } from '@/lib/utils';
 import { useI18n } from '@/lib/i18n';
 import { spotStatusKey, inferSpotMode, spotModeCategory } from '@/lib/spot';
+import { SPOT_MARKERS, activeMarkers } from '@/lib/spotMarkers';
+import { applySpotDisplay, readSpotDisplayOptions } from '@/lib/spotDisplay';
+import { writeUiPref } from '@/lib/uiPref';
 
 // BandMap — vertical spectrum panel inspired by Log4OM.
 // - Full band is always visible; zoom changes pixels-per-kHz, scroll
@@ -22,9 +25,58 @@ interface Spot {
   band?: string;
   comment?: string;
   spotter?: string;
+  // The park reference the POTA poller tagged this spot with. The map never
+  // reads it — the click handler upstream turns it into the QSO's POTA award
+  // reference — but it is declared so it cannot be lost by accident.
+  //
+  // It travelled only because the spot objects are passed through by reference
+  // and the type was erased. The first refactor to copy a spot field by field
+  // would have dropped the park silently, and the only symptom would be an
+  // activation logged without its reference. Same mistake as the status entry
+  // below, whose extra markers were arriving and undeclared.
+  pota_ref?: string;
 }
 
-type SpotStatusEntry = { status: string; country?: string };
+// The FULL status entry, not the two fields the map used to declare. The extra
+// markers were already arriving in this object — the local type simply never
+// mentioned them, so they could not be drawn.
+type SpotStatusEntry = {
+  status?: string;
+  country?: string;
+  worked_call?: boolean;
+  // worked_slot: this exact callsign already worked on THIS band and mode.
+  worked_slot?: boolean;
+  new_county?: boolean;
+  new_pota?: boolean;
+  new_pfx?: boolean;
+  // Whether the station uploads to LoTW. Not a status — it says nothing about
+  // whether the spot is worth chasing — so it is drawn as a badge, never a colour.
+  lotw?: boolean;
+};
+
+// The extra markers are ORTHOGONAL to the entity status: a spot can be a worked
+// entity AND a new park. The cluster list stacks them as separate badges instead
+// of letting one replace another, so the map stacks them too — as segments of
+// the pill's left accent bar, which until now only repeated the pill's own
+// colour and carried no information of its own.
+//
+// Their colours come from lib/spotMarkers, shared with the cluster list: the
+// same fact must not be violet in one panel and green in the next.
+// The map shows three of the five. A new PREFIX and a new GRID are left to the
+// cluster list, which has the width to name them: the
+// pill is 22 px tall, and a fourth segment turns the strip into a colour code
+// nobody can read at a glance. Add it here the day the strip earns more room.
+const BMP_MARKERS = SPOT_MARKERS.filter((m) => m.key !== 'new_pfx' && m.key !== 'new_grid');
+const markersFor = (e: SpotStatusEntry | undefined) =>
+  activeMarkers(e).filter((m) => m.key !== 'new_pfx' && m.key !== 'new_grid');
+
+// The legend spells the markers out; the cluster list's badges are abbreviated
+// ("NEW CTY") because they sit in a narrow cell, and there is room here.
+const BMP_MARKER_LABEL: Record<string, string> = {
+  new_pota: 'bmp.legendNewPota',
+  new_county: 'bmp.legendNewCounty',
+  worked_call: 'bmp.legendWorkedCall',
+};
 
 interface Props {
   band: string;
@@ -41,6 +93,14 @@ interface Props {
   // globally from the band-map tab toolbar.
   hideDigital?: boolean;
   fitToBand?: boolean;
+  // onToggleFit and onToggleHideDigital add the two switches to this map's own
+  // header. Only the docked map passes them: the Band Map tab has both in its
+  // toolbar, above maps that all obey them at once, and a switch inside each
+  // card as well would be four ways to change one setting.
+  onToggleFit?: () => void;
+  onToggleHideDigital?: () => void;
+  // Mark stations that upload to LoTW (Settings → Appearance).
+  showLotw?: boolean;
   // keyNav enables Ctrl+↑ / Ctrl+↓ to hop to the next spot above / below the rig
   // frequency (and tune to it). Only the docked Main-view band map sets this, so
   // the multi-band Band Map tab (several maps) doesn't fight over the shortcut.
@@ -115,20 +175,39 @@ function LegendDot({ cls, colour, label }: { cls?: string; colour?: string; labe
 function statusLabel(s: string, t: (k: string) => string): string {
   switch (s) {
     case 'new':      return t('bmp.statusNew');
+    case 'new-band-mode': return t('bmp.statusNewBandMode');
     case 'new-band': return t('bmp.statusNewBand');
+    case 'new-mode': return t('bmp.statusNewMode');
     case 'new-slot': return t('bmp.statusNewSlot');
+    case 'new-call': return t('bmp.statusNewCall');
     case 'worked':   return t('bmp.statusWorked');
+    // An empty status means the entity could not be resolved. Nothing else
+    // empties it: the mute option leaves the status alone and takes only the
+    // already-worked-callsign mark.
     default:         return t('bmp.statusUnresolved');
   }
 }
 
+// QUIET: no status colour at all. The pill keeps the card background and the
+// accent drops to a plain border grey, so the spot is present but says nothing.
+const QUIET_STYLE = {
+  pill: 'bg-card text-muted-foreground border-border/60 hover:bg-muted/50',
+  bar:  'bg-muted-foreground/30',
+  line: 'stroke-border',
+  dot:  'fill-border',
+};
+
 function statusStyle(s: string): { pill: string; bar: string; line: string; dot: string } {
   // pill = full pill background+text+border
   // bar  = thick left accent inside the pill
   // line = SVG leader stroke (visible on hover)
   // dot  = small marker on the freq scale
   switch (s) {
-    case 'new':      return {
+    // NEW and NEW BAND+MODE share the strongest colour: both mean "there is
+    // something here you have never had", and a sixth shade in a palette read at
+    // a glance is a shade nobody can name.
+    case 'new':
+    case 'new-band-mode': return {
       pill: 'bg-danger-muted text-danger-muted-foreground border-danger-border hover:bg-danger-muted',
       bar:  'bg-danger',
       line: 'stroke-danger',
@@ -140,18 +219,14 @@ function statusStyle(s: string): { pill: string; bar: string; line: string; dot:
       line: 'stroke-warning',
       dot:  'fill-warning',
     };
+    case 'new-call':
     case 'new-slot': return {
       pill: 'bg-caution-muted text-caution-muted-foreground border-caution-border hover:bg-caution-muted',
       bar:  'bg-caution',
       line: 'stroke-caution',
       dot:  'fill-caution',
     };
-    case 'worked':   return {
+    case 'worked':   return QUIET_STYLE;
-      pill: 'bg-card text-muted-foreground border-border/60 hover:bg-muted/50',
-      bar:  'bg-muted-foreground/30',
-      line: 'stroke-border',
-      dot:  'fill-border',
-    };
     default:         return {
       pill: 'bg-card text-foreground border-border hover:bg-accent/40',
       bar:  'bg-primary/60',
@@ -164,7 +239,37 @@ function statusStyle(s: string): { pill: string; bar: string; line: string; dot:
 // Pixels-per-kHz at each zoom step. Base 8 px/kHz means a stacked spot
 // every 2.75 kHz fits without anti-overlap kicking in — comfortable for
 // most bands. Higher levels are for fine inspection of crowded sub-bands.
-const PX_PER_KHZ = [8, 16, 32, 64, 128, 256];
+// Zoom steps, px per kHz. 2 and 4 sit below the old floor of 8 so a whole band
+// fits without FIT taking the scale away from you: 20 m end to end is 700 px at
+// 2 px/kHz, which scrolls in one screen on most displays.
+const PX_PER_KHZ = [2, 4, 8, 16, 32, 64, 128, 256];
+const DEFAULT_ZOOM_IDX = PX_PER_KHZ.indexOf(32);
+
+// Zoom is remembered PER BAND, in ONE json key rather than one key per band:
+// lib/uiPref keeps an explicit list of the preferences that travel with data/,
+// and thirteen entries there to say the same thing would be thirteen chances to
+// forget one.
+const ZOOM_KEY = 'opslog.bandMapZoom';
+
+function readZoomMap(): Record<string, number> {
+  try {
+    const m = JSON.parse(localStorage.getItem(ZOOM_KEY) || '{}');
+    return m && typeof m === 'object' ? m : {};
+  } catch {
+    return {};
+  }
+}
+
+function readZoom(band: string): number {
+  const n = readZoomMap()[band];
+  return Number.isInteger(n) && n >= 0 && n < PX_PER_KHZ.length ? n : DEFAULT_ZOOM_IDX;
+}
+
+function writeZoom(band: string, idx: number): void {
+  const m = readZoomMap();
+  m[band] = idx;
+  writeUiPref(ZOOM_KEY, JSON.stringify(m));
+}
 const SCALE_W = 56;
 const PILL_H = 22;     // px — height of each callsign pill
 const PILL_GAP = 32;   // px between scale border and first pill (room for leader)
@@ -179,11 +284,42 @@ const BOT_PAD = 14;    // the top-most freq label isn't clipped at y=0
 // last; ties broken by closeness to the rig freq).
 const MAX_VISIBLE_SPOTS = 30;
 
-export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, onClose, side = 'right', onToggleSide, hideDigital = false, fitToBand = false, keyNav = false }: Props) {
+export function BandMap({ band, spots, spotStatus: spotStatusRaw, currentFreqHz, onSpotClick, onClose, side = 'right', onToggleSide, hideDigital = false, fitToBand = false, onToggleFit, onToggleHideDigital, keyNav = false, showLotw = false }: Props) {
   const { t } = useI18n();
+
+  // The two display options are applied ONCE here, on the whole map, so the
+  // leader lines, the dots, the pills and the badges can never disagree — and so
+  // the map and the cluster list share the single rule set in lib/spotDisplay.
+  // Re-derived whenever the poll delivers a new status map, which is also when a
+  // just-changed option takes effect.
+  // Read at render time, not inside the memo: the options must be part of the
+  // dependencies. Keyed only on spotStatusRaw, toggling an option changed
+  // nothing until the next poll happened to hand over a fresh object.
+  const dispOpts = readSpotDisplayOptions();
+  const spotStatus = useMemo(() => {
+    if (!dispOpts.muteWorked && !dispOpts.slotHighlight) return spotStatusRaw;
+    const out: Record<string, SpotStatusEntry> = {};
+    for (const k of Object.keys(spotStatusRaw)) out[k] = applySpotDisplay(spotStatusRaw[k], dispOpts) as SpotStatusEntry;
+    return out;
+  }, [spotStatusRaw, dispOpts.muteWorked, dispOpts.slotHighlight]);
   const range = BAND_RANGES[band];
   const segments = SEGMENT_COLORS[band] ?? [];
-  const [zoomIdx, setZoomIdx] = useState(2); // default 32 px/kHz
+  const [zoomIdx, setZoomIdx] = useState(() => readZoom(band));
+  // The docked map follows the rig, so a band change must bring up THAT band's
+  // remembered zoom.
+  useEffect(() => { setZoomIdx(readZoom(band)); }, [band]);
+  // Stored from the interaction, not from an effect on zoomIdx: an effect would
+  // also fire on the band change above, and in the same commit it would still be
+  // holding the PREVIOUS band's index — writing it over the new band's. Doing it
+  // where the operator actually turns the wheel keeps the two apart. (Running
+  // twice under StrictMode is harmless: the same value is stored.)
+  const changeZoom = useCallback((delta: number) => {
+    setZoomIdx((z) => {
+      const n = Math.max(0, Math.min(PX_PER_KHZ.length - 1, z + delta));
+      if (n !== z) writeZoom(band, n);
+      return n;
+    });
+  }, [band]);
   const scrollerRef = useRef<HTMLDivElement | null>(null);
   const [containerH, setContainerH] = useState(400);
 
@@ -246,8 +382,10 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
       const k = spotStatusKey(s.dx_call, s.band ?? '', s.comment ?? '', s.freq_hz);
       switch (spotStatus[k]?.status ?? '') {
         case 'new':      return 0;
+        case 'new-band-mode': return 0;
         case 'new-band': return 1;
         case 'new-slot': return 2;
+        case 'new-call': return 2;
         case 'worked':   return 4;
         default:         return 3;
       }
@@ -351,46 +489,21 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
       if (!range) return;
       if (e.ctrlKey || e.metaKey) {
         e.preventDefault();
-        setZoomIdx((z) => Math.max(0, Math.min(PX_PER_KHZ.length - 1, z + (e.deltaY > 0 ? -1 : 1))));
+        changeZoom(e.deltaY > 0 ? -1 : 1);
       }
     };
     el.addEventListener('wheel', onWheel, { passive: false });
     return () => el.removeEventListener('wheel', onWheel);
   }, [range]);
 
-  if (!range) {
-    return (
-      <div className="h-full w-full flex flex-col items-center justify-center text-xs text-muted-foreground p-3 bg-muted/20">
-        <div className="text-sm font-semibold mb-1">{t('bmp.bandMap')}</div>
-        {t('bmp.notConfigured', { band: band || '—' })}
-      </div>
-    );
-  }
-
-  // Tick step (where small marks land) and label step (where the kHz
-  // number is printed) are decoupled so the scale shows ~10-20 numeric
-  // labels per viewport regardless of zoom — at base 8 px/kHz we want
-  // labels every 25 kHz, not every 250.
-  let tickStep = 50;
-  let labelStep = 100;
-  if (pxPerKHz >= 4)   { tickStep = 25; labelStep = 50;  }
-  if (pxPerKHz >= 8)   { tickStep = 5;  labelStep = 25;  }
-  if (pxPerKHz >= 16)  { tickStep = 2;  labelStep = 10;  }
-  if (pxPerKHz >= 32)  { tickStep = 1;  labelStep = 5;   }
-  if (pxPerKHz >= 64)  { tickStep = 1;  labelStep = 2;   }
-  if (pxPerKHz >= 128) { tickStep = 1;  labelStep = 1;   }
-  const ticks: number[] = [];
-  for (let t = Math.ceil(lo / tickStep) * tickStep; t <= hi; t += tickStep) ticks.push(t);
-
-  function recenterOnRig() {
-    if (!scrollerRef.current || currentFreqHz <= 0) return;
-    const y = freqToY(currentFreqHz / 1000);
-    scrollerRef.current.scrollTop = Math.max(0, y - containerH / 2);
-  }
-
   // Ctrl+↑ / Ctrl+↓ hop to the next spot above / below the rig frequency and tune
   // to it. Higher freq is UP on the map (see freqToY), so ↑ = next higher spot.
   // Only active on the docked Main-view map (keyNav) and ignored while typing.
+  // MUST stay ABOVE the `if (!range)` early return below: on an unknown band
+  // (e.g. a spurious 33 cm CAT reading from an Icom) that return skipped this
+  // hook, so the hook count changed between renders and React crashed with #300
+  // ("rendered fewer hooks than expected"). lo/hi are always defined (they fall
+  // back to [0,1] when there's no range), so it's safe to run here.
   useEffect(() => {
     if (!keyNav) return;
     const onKey = (e: KeyboardEvent) => {
@@ -420,6 +533,38 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
     return () => window.removeEventListener('keydown', onKey);
   }, [keyNav, spots, band, currentFreqHz, lo, hi, onSpotClick]);
 
+  if (!range) {
+    return (
+      <div className="h-full w-full flex flex-col items-center justify-center text-xs text-muted-foreground p-3 bg-muted/20">
+        <div className="text-sm font-semibold mb-1">{t('bmp.bandMap')}</div>
+        {t('bmp.notConfigured', { band: band || '—' })}
+      </div>
+    );
+  }
+
+  // Tick step (where small marks land) and label step (where the kHz
+  // number is printed) are decoupled so the scale shows ~10-20 numeric
+  // labels per viewport regardless of zoom — at 8 px/kHz we want labels
+  // every 25 kHz, not every 250. The bare values below are the floor, and
+  // they are what the 2 px/kHz step lands on: a whole band in one screen
+  // wants a number every 100 kHz, not every 25.
+  let tickStep = 50;
+  let labelStep = 100;
+  if (pxPerKHz >= 4)   { tickStep = 25; labelStep = 50;  }
+  if (pxPerKHz >= 8)   { tickStep = 5;  labelStep = 25;  }
+  if (pxPerKHz >= 16)  { tickStep = 2;  labelStep = 10;  }
+  if (pxPerKHz >= 32)  { tickStep = 1;  labelStep = 5;   }
+  if (pxPerKHz >= 64)  { tickStep = 1;  labelStep = 2;   }
+  if (pxPerKHz >= 128) { tickStep = 1;  labelStep = 1;   }
+  const ticks: number[] = [];
+  for (let t = Math.ceil(lo / tickStep) * tickStep; t <= hi; t += tickStep) ticks.push(t);
+
+  function recenterOnRig() {
+    if (!scrollerRef.current || currentFreqHz <= 0) return;
+    const y = freqToY(currentFreqHz / 1000);
+    scrollerRef.current.scrollTop = Math.max(0, y - containerH / 2);
+  }
+
   const currentKHz = currentFreqHz ? currentFreqHz / 1000 : 0;
   const showRigPointer = currentKHz >= lo && currentKHz <= hi;
   const rigY = freqToY(currentKHz);
@@ -427,18 +572,48 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
   return (
     <div className="h-full w-full flex flex-col min-h-0 bg-card">
       <div className="px-2 py-1.5 text-xs font-semibold uppercase tracking-wider text-muted-foreground bg-muted/40 border-b border-border flex flex-nowrap items-center gap-0.5 shrink-0">
-        <span className="flex-1 min-w-0 truncate">{t('bmp.map')} · {band}</span>
+        {/* The band alone. "Map · 20M" spent a third of a narrow header saying
-        <button type="button" onClick={() => setZoomIdx((z) => Math.max(0, z - 1))} disabled={fitToBand || zoomIdx === 0}
+            what the panel obviously is, and with four band maps side by side it
+            was four times the same word. */}
+        <span className="flex-1 min-w-0 truncate">{band}</span>
+        <button type="button" onClick={() => changeZoom(-1)} disabled={fitToBand || zoomIdx === 0}
           className="size-5 shrink-0 inline-flex items-center justify-center rounded hover:bg-muted disabled:opacity-30"
           title={t('bmp.zoomOut')}>
           <Minus className="size-3" />
         </button>
+        {/* A readout, not a switch.
+            
+            It WAS the switch for a day: clicking the px/kHz value toggled
+            fit-to-band, and in fit it read "FIT". Nobody found it — a control
+            whose label is a measurement does not look like a control, and once
+            switched off there was no longer anything on screen saying the option
+            existed. The switches below say what they are. */}
+        {/* In fit mode the readout has nothing left to say — the lit FIT button
+            says it, and printing the word twice side by side is just noise. The
+            Band Map tab's cards have no button, so there the readout keeps
+            reporting both states. */}
+        {(!fitToBand || !onToggleFit) && (
           <span className="shrink-0 font-mono text-[10px] normal-case tracking-normal whitespace-nowrap px-0.5">{fitToBand ? t('bmp.fit') : `${pxPerKHz}px/kHz`}</span>
-        <button type="button" onClick={() => setZoomIdx((z) => Math.min(PX_PER_KHZ.length - 1, z + 1))} disabled={fitToBand || zoomIdx === PX_PER_KHZ.length - 1}
+        )}
+        <button type="button" onClick={() => changeZoom(1)} disabled={fitToBand || zoomIdx === PX_PER_KHZ.length - 1}
           className="size-5 shrink-0 inline-flex items-center justify-center rounded hover:bg-muted disabled:opacity-30"
           title={t('bmp.zoomIn')}>
           <Plus className="size-3" />
         </button>
+        {onToggleFit && (
+          <button type="button" onClick={onToggleFit} title={t('bmp.fitTitle')}
+            className={cn('shrink-0 text-[10px] font-semibold normal-case tracking-normal px-1 rounded border transition-colors',
+              fitToBand ? 'border-primary bg-primary text-primary-foreground' : 'border-border text-muted-foreground hover:bg-muted')}>
+            {t('bmp.fit')}
+          </button>
+        )}
+        {onToggleHideDigital && (
+          <button type="button" onClick={onToggleHideDigital} title={t('bmp.hideFtTitle')}
+            className={cn('shrink-0 text-[10px] font-semibold normal-case tracking-normal px-1 rounded border transition-colors',
+              hideDigital ? 'border-primary bg-primary text-primary-foreground' : 'border-border text-muted-foreground hover:bg-muted')}>
+            {t('bmp.ftx')}
+          </button>
+        )}
         <button type="button" onClick={recenterOnRig}
           className="size-5 inline-flex items-center justify-center rounded hover:bg-muted"
           title={t('bmp.scrollToRig')}>
@@ -562,12 +737,32 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
                   'hover:translate-x-0.5 hover:shadow',
                   style.pill,
                 )}
-                title={`${p.spot.dx_call}${entry?.country ? ' · ' + entry.country : ''} · ${p.spot.freq_khz.toFixed(1)} kHz · ${statusLabel(st, t)}${p.spot.comment ? ' · ' + p.spot.comment : ''}${p.spot.spotter ? ' · de ' + p.spot.spotter : ''}`}
+                title={`${p.spot.dx_call}${entry?.country ? ' · ' + entry.country : ''} · ${p.spot.freq_khz.toFixed(1)} kHz · ${statusLabel(st, t)}${markersFor(entry).map((m) => ' · ' + t(BMP_MARKER_LABEL[m.key])).join('')}${p.spot.comment ? ' · ' + p.spot.comment : ''}${p.spot.spotter ? ' · de ' + p.spot.spotter : ''}`}
               >
-                {/* Status accent strip on the left */}
+                {/* Left accent strip. With no extra marker it repeats the status
-                <span className={cn('w-1 shrink-0', style.bar)} aria-hidden />
+                    colour, exactly as before; otherwise it splits into one
+                    segment per marker, so "worked entity + new park" shows both
+                    instead of one hiding the other. */}
+                {(() => {
+                  const marks = markersFor(entry);
+                  if (marks.length === 0) return <span className={cn('w-1 shrink-0', style.bar)} aria-hidden />;
+                  return (
+                    <span className="w-1 shrink-0 flex flex-col" aria-hidden>
+                      {marks.map((m) => <span key={m.key} className="flex-1" style={{ background: m.colour }} />)}
+                    </span>
+                  );
+                })()}
                 <span className="flex items-center gap-1.5 px-2 font-mono text-[11px] font-bold leading-none">
                   <span>{p.spot.dx_call}</span>
+                  {/* Same badge the cluster list draws, for the same reason: the
+                      muted-blue of a confirmation, never a status colour —
+                      whether a station uploads to LoTW says nothing about
+                      whether the spot is worth chasing. A glyph rather than a
+                      colour also keeps it off the channel the statuses use. */}
+                  {showLotw && entry?.lotw && (
+                    <span title={t('clu.lotwBadge')} className="text-[9px] font-normal rounded px-1 py-px"
+                      style={{ background: 'color-mix(in srgb, var(--info) 22%, transparent)', color: 'var(--info)' }}>L</span>
+                  )}
                   {mode && (
                     <span className="text-[9px] font-normal text-current/70 bg-current/10 rounded px-1 py-px">
                       {mode}
@@ -585,6 +780,11 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
         <LegendDot cls="bg-warning" label={t('bmp.legendNewBand')} />
         <LegendDot cls="bg-caution" label={t('bmp.legendNewSlot')} />
         <LegendDot cls="bg-muted-foreground/30" label={t("bmp.legendWorked")} />
+        {/* The stacked markers, straight from the shared table so the legend
+            cannot drift from what the pills actually draw. */}
+        {BMP_MARKERS.map((m) => (
+          <LegendDot key={m.key} colour={m.colour} label={t(BMP_MARKER_LABEL[m.key])} />
+        ))}
         {/* Sub-band shading, so the wash behind the pills is never colour-alone. */}
         <span className="mx-0.5 opacity-40">|</span>
         <LegendDot colour={SEG_CW} label={t("bmp.legendCW")} />

frontend/src/components/BandSlotGrid.tsx

@@ -1,8 +1,11 @@
-import { useMemo } from 'react';
+import { useEffect, useMemo, useState } from 'react';
-import { Star, Radio, Sunrise, Sunset } from 'lucide-react';
+import { Star, Radio, Sunrise, Sunset, X, Loader2 } from 'lucide-react';
 import { Badge } from '@/components/ui/badge';
 import { cn } from '@/lib/utils';
 import { sunTimes } from '@/lib/sun';
+import { isQSLConfirmed } from '@/lib/qsl';
+import { useI18n } from '@/lib/i18n';
+import { BandSlotQSOs } from '../../wailsjs/go/main/App';
 import type { WorkedBeforeView } from '@/types';
 
 type WorkedBefore = WorkedBeforeView;
@@ -18,6 +21,12 @@ interface Props {
   // to an entity with no position at all, and the block simply does not appear.
   lat?: number;
   lon?: number;
+  // Set when the matrix is showing a QSO picked in the log grid rather than the
+  // entry form — labelled so the two can never be confused.
+  forCall?: string;
+  // Open the QSO editor for a contact — makes callsigns in the cell drill-down
+  // clickable. Threaded down from App.openEdit.
+  onEditQso?: (id: number) => void;
 }
 
 // Compact column label for a band tag: keep the classic V/U for 2m/70cm,
@@ -68,28 +77,33 @@ const STATUS_CLASSES: Record<string, string> = {
   dxcc_w: 'bg-mx-dx-work',
 };
 
-// Legend entries, in the same colour order as the cells. swatch = the
+// Legend entries, in the same colour order as the cells — and the same order and
-// background class (or a special ring marker for the current-entry cell).
+// i18n keys the Appearance panel's colour pickers use, so the two can never
+// disagree about which green is which. swatch = the background class (or a
+// special ring marker for the current-entry cell).
 const LEGEND: { swatch: string; ring?: boolean; label: string }[] = [
-  { swatch: 'bg-mx-call-conf', label: 'Call confirmed' },
+  { swatch: 'bg-mx-call-conf', label: 'mx.callConf' },
-  { swatch: 'bg-mx-call-work', label: 'Call worked' },
+  { swatch: 'bg-mx-call-work', label: 'mx.callWork' },
-  { swatch: 'bg-mx-dx-conf', label: 'Entity confirmed' },
+  { swatch: 'bg-mx-dx-conf', label: 'mx.dxConf' },
-  { swatch: 'bg-mx-dx-work', label: 'Entity worked' },
+  { swatch: 'bg-mx-dx-work', label: 'mx.dxWork' },
-  { swatch: 'bg-mx-none', label: 'Not worked' },
+  { swatch: 'bg-mx-none', label: 'mx.none' },
-  { swatch: 'bg-mx-none', ring: true, label: 'Current entry' },
+  { swatch: 'bg-mx-none', ring: true, label: 'mx.current' },
 ];
 
-function cellTitle(band: string, cls: string, status: string, current: boolean): string {
+function cellTitle(t: (k: string) => string, band: string, cls: string, status: string, current: boolean): string {
   const desc =
-    status === 'call_c' ? 'This callsign confirmed' :
+    status === 'call_c' ? t('mx.tipCallConf') :
-    status === 'call_w' ? 'This callsign worked (not confirmed)' :
+    status === 'call_w' ? t('mx.tipCallWork') :
-    status === 'dxcc_c' ? 'Entity confirmed (other callsign)' :
+    status === 'dxcc_c' ? t('mx.tipDxConf') :
-    status === 'dxcc_w' ? 'Entity worked (other callsign)' :
+    status === 'dxcc_w' ? t('mx.tipDxWork') :
-                          'Never worked';
+                          t('mx.tipNone');
-  return `${band} ${cls}: ${desc}${current ? ' — current entry' : ''}`;
+  return `${band} ${cls}: ${desc}${current ? ' — ' + t('mx.current') : ''}`;
 }
 
-export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCall = true, lat, lon }: Props) {
+export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCall = true, lat, lon, forCall, onEditQso }: Props) {
+  const { t } = useI18n();
+  // Cell drill-down: which band+class the operator clicked, or null.
+  const [slot, setSlot] = useState<{ band: string; cls: string } | null>(null);
   // Columns from the operator's configured bands (so the matrix shows only the
   // bands they actually use), falling back to the built-in default set.
   const cols = useMemo(
@@ -163,8 +177,17 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
     () => (lat == null || lon == null ? null : sunTimes(new Date(), lat, lon)),
     [lat, lon],
   );
+  // Stacked, not side by side. Laid out in a row this cost about 150 px of a
+  // header that has to hold the callsign, the badges and the band grid, and it
+  // was what pushed the whole row onto a second line. Two short times one above
+  // the other take a fraction of that and no extra height: the row is already
+  // taller than one line of text.
+  //
+  // "UTC" moves into the tooltip with them — the times are monospaced and always
+  // UTC everywhere in OpsLog, so the label was spending width to repeat a
+  // convention the operator already lives by.
   const sunBlock = sun ? (
-    <div className="ml-auto flex items-center gap-3 text-xs shrink-0"
+    <div className="ml-auto flex flex-col items-end leading-tight text-xs shrink-0"
       title="Sunrise / sunset at the DX station (UTC)">
       {sun.polarDay ? (
         <span className="font-semibold text-warning">midnight sun</span>
@@ -173,14 +196,13 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
       ) : (
         <>
           <span className="flex items-center gap-1">
-            <Sunrise className="size-3.5 text-warning" />
+            <Sunrise className="size-3 text-warning" />
             <span className="font-mono tabular-nums">{sun.rise || '—'}</span>
           </span>
           <span className="flex items-center gap-1">
-            <Sunset className="size-3.5 text-info" />
+            <Sunset className="size-3 text-info" />
             <span className="font-mono tabular-nums">{sun.set || '—'}</span>
           </span>
-          <span className="text-muted-foreground">UTC</span>
         </>
       )}
     </div>
@@ -208,6 +230,14 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
           </>
         ) : hasDxcc ? (
           <>
+            {/* Says WHOSE stats these are when they come from a row picked in
+                the log rather than from what's being typed. */}
+            {forCall && (
+              <Badge variant="outline" className="px-2 py-0.5 text-[10px] font-mono shrink-0"
+                title="Stats for the QSO selected in the log">
+                {forCall}
+              </Badge>
+            )}
             <Badge className="bg-primary text-primary-foreground px-3 py-1 text-xs normal-case font-semibold tracking-normal">
               {dxccName || `DXCC #${dxcc}`}
             </Badge>
@@ -282,11 +312,15 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
                   return (
                     <td
                       key={b.tag}
-                      title={cellTitle(b.tag, cls, st, isCurrent)}
+                      title={cellTitle(t, b.tag, cls, st, isCurrent) + (st ? ' — ' + t('mx.tipClick') : '')}
+                      onClick={st ? () => setSlot({ band: b.tag, cls }) : undefined}
                       className={cn(
                         'w-[28px] h-[24px] rounded transition-colors p-0',
                         st ? STATUS_CLASSES[st] : 'bg-mx-none',
-                        isCurrent && 'ring-2 ring-warning ring-inset',
+                        // Only a filled cell has anything to show — an empty one
+                        // stays inert rather than opening a "no QSOs" dialog.
+                        st && 'cursor-pointer hover:brightness-110',
+                        isCurrent && 'ring-2 ring-mx-cur ring-inset',
                       )}
                     />
                   );
@@ -305,14 +339,127 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
               className={cn(
                 'inline-block size-3 rounded shrink-0',
                 l.swatch,
-                l.ring && 'ring-2 ring-warning ring-inset',
+                l.ring && 'ring-2 ring-mx-cur ring-inset',
               )}
             />
-            {l.label}
+            {t(l.label)}
           </span>
         ))}
       </div>
       </div>
+
+      {slot && (
+        <SlotQSOModal
+          call={wb?.callsign ?? ''}
+          dxcc={dxcc}
+          entity={dxccName}
+          band={slot.band}
+          cls={slot.cls}
+          onClose={() => setSlot(null)}
+          onEdit={onEditQso}
+        />
+      )}
     </section>
   );
 }
+
+// ── Cell drill-down ──────────────────────────────────────────────────────────
+// The contacts behind one band+class cell: this exact callsign AND anyone else
+// in the entity, because that is the pair of facts the cell's colour encodes.
+// The call's own QSOs are marked so the two never blur together.
+
+function SlotQSOModal({ call, dxcc, entity, band, cls, onClose, onEdit }: {
+  call: string; dxcc: number; entity: string; band: string; cls: string; onClose: () => void; onEdit?: (id: number) => void;
+}) {
+  const [rows, setRows] = useState<any[] | null>(null);
+  const [err, setErr] = useState('');
+
+  useEffect(() => {
+    let dead = false;
+    BandSlotQSOs(call, dxcc, band, cls)
+      .then((r: any) => { if (!dead) setRows((r ?? []) as any[]); })
+      .catch((e: any) => { if (!dead) { setErr(String(e?.message ?? e)); setRows([]); } });
+    return () => { dead = true; };
+  }, [call, dxcc, band, cls]);
+
+  useEffect(() => {
+    // Capture phase: the app's global ESC handler resets the entry form, and
+    // closing a dialog must not also wipe what the operator was typing.
+    function onKey(e: KeyboardEvent) {
+      if (e.key === 'Escape') { e.stopImmediatePropagation(); e.preventDefault(); onClose(); }
+    }
+    window.addEventListener('keydown', onKey, true);
+    return () => window.removeEventListener('keydown', onKey, true);
+  }, [onClose]);
+
+  return (
+    <div className="fixed inset-0 z-50 flex items-center justify-center bg-black/60 backdrop-blur-[2px] p-4" onClick={onClose}>
+      <div className="bg-card border border-border rounded-xl shadow-2xl w-[760px] max-w-full max-h-[72vh] flex flex-col overflow-hidden ring-1 ring-black/5"
+        onClick={(e) => e.stopPropagation()}>
+        <div className="flex items-center gap-2.5 px-4 py-2.5 border-b border-border bg-muted/30">
+          <span className="inline-flex items-center justify-center h-6 min-w-6 px-1.5 rounded-md bg-primary/15 text-primary text-[11px] font-bold shrink-0 tabular-nums">{band}</span>
+          <div className="min-w-0">
+            <div className="font-semibold text-sm leading-tight truncate">
+              {cls}{entity && <span className="text-muted-foreground font-normal"> · {entity}</span>}
+            </div>
+            {onEdit && <div className="text-[10px] text-muted-foreground leading-tight">Click a callsign to edit the QSO</div>}
+          </div>
+          <span className="ml-auto text-xs text-muted-foreground tabular-nums shrink-0">{rows ? `${rows.length} QSO${rows.length > 1 ? 's' : ''}` : ''}</span>
+          <button type="button" onClick={onClose} className="text-muted-foreground hover:text-foreground shrink-0 rounded p-0.5 hover:bg-muted transition-colors">
+            <X className="size-4" />
+          </button>
+        </div>
+        <div className="flex-1 overflow-auto">
+          {err && <p className="p-3 text-xs text-destructive">{err}</p>}
+          {!rows ? (
+            <p className="p-4 text-xs text-muted-foreground flex items-center gap-2">
+              <Loader2 className="size-3.5 animate-spin" /> Loading…
+            </p>
+          ) : rows.length === 0 ? (
+            <p className="p-4 text-xs text-muted-foreground italic">No QSOs.</p>
+          ) : (
+            <table className="w-full text-xs border-collapse">
+              <thead className="sticky top-0 z-10 bg-muted/80 backdrop-blur text-[10px] uppercase tracking-wider text-muted-foreground">
+                <tr>
+                  <th className="text-left font-medium px-3 py-1.5">Date UTC</th>
+                  <th className="text-left font-medium px-3 py-1.5">Callsign</th>
+                  <th className="text-left font-medium px-3 py-1.5">Mode</th>
+                  <th className="text-left font-medium px-3 py-1.5">Freq</th>
+                  <th className="text-left font-medium px-3 py-1.5">Name</th>
+                  <th className="text-center font-medium px-3 py-1.5">Cfm</th>
+                </tr>
+              </thead>
+              <tbody>
+                {rows.map((q, i) => {
+                  const cfm = isQSLConfirmed(q.lotw_rcvd) || isQSLConfirmed(q.eqsl_rcvd) || isQSLConfirmed(q.qsl_rcvd);
+                  const mine = q.callsign === call;
+                  return (
+                    <tr key={q.id ?? i} className="border-t border-border/40 even:bg-muted/[0.06] hover:bg-primary/[0.06] transition-colors">
+                      <td className="px-3 py-1.5 tabular-nums text-muted-foreground whitespace-nowrap">
+                        {String(q.qso_date ?? '').slice(0, 16).replace('T', ' ')}
+                      </td>
+                      <td className="px-3 py-1.5">
+                        {onEdit ? (
+                          <button type="button" onClick={() => { onEdit(q.id as number); onClose(); }} title="Edit this QSO"
+                            className={cn('font-mono cursor-pointer text-left hover:underline underline-offset-2', mine ? 'font-bold text-primary' : 'text-foreground hover:text-primary')}>
+                            {q.callsign}
+                          </button>
+                        ) : (
+                          <span className={cn('font-mono', mine && 'font-bold text-primary')}>{q.callsign}</span>
+                        )}
+                      </td>
+                      <td className="px-3 py-1.5">{q.mode}</td>
+                      <td className="px-3 py-1.5 tabular-nums text-muted-foreground">{q.freq_hz ? (q.freq_hz / 1e6).toFixed(3) : ''}</td>
+                      <td className="px-3 py-1.5 text-muted-foreground truncate max-w-[180px]">{q.name}</td>
+                      <td className="px-3 py-1.5 text-center">{cfm ? <span className="text-success">✓</span> : <span className="text-muted-foreground/30">·</span>}</td>
+                    </tr>
+                  );
+                })}
+              </tbody>
+            </table>
+          )}
+        </div>
+      </div>
+    </div>
+  );
+}

frontend/src/components/BulkEditModal.tsx

@@ -30,6 +30,8 @@ const FIELDS: FieldDef[] = [
   { id: 'qsl_rcvd',          label: 'bulk.fQslRcvd',         group: 'QSL / upload', kind: 'status' },
   { id: 'qsl_rcvd_date',     label: 'bulk.fQslRcvdDate',     group: 'QSL / upload', kind: 'date' },
   { id: 'qsl_via',           label: 'bulk.fQslVia',          group: 'QSL / upload', kind: 'text' },
+  { id: 'qsl_sent_via',      label: 'bulk.fQslSentVia',      group: 'QSL / upload', kind: 'text' },
+  { id: 'qsl_rcvd_via',      label: 'bulk.fQslRcvdVia',      group: 'QSL / upload', kind: 'text' },
   { id: 'lotw_sent',         label: 'bulk.fLotwSent',        group: 'QSL / upload', kind: 'status' },
   { id: 'lotw_sent_date',    label: 'bulk.fLotwSentDate',    group: 'QSL / upload', kind: 'date' },
   { id: 'lotw_rcvd',         label: 'bulk.fLotwRcvd',        group: 'QSL / upload', kind: 'status' },
@@ -46,6 +48,12 @@ const FIELDS: FieldDef[] = [
   { id: 'clublog_sent_date', label: 'bulk.fClublogSentDate', group: 'QSL / upload', kind: 'date' },
   { id: 'hrdlog_sent',       label: 'bulk.fHrdlogSent',      group: 'QSL / upload', kind: 'status' },
   { id: 'hrdlog_sent_date',  label: 'bulk.fHrdlogSentDate',  group: 'QSL / upload', kind: 'date' },
+  // HAMLOG.online: no promoted column, written into extras_json (see
+  // qso.bulkEditableExtras). Status and date, like every other service here.
+  { id: 'hamlog_sent',       label: 'bulk.fHamlogSent',      group: 'QSL / upload', kind: 'status' },
+  { id: 'hamlog_sent_date',  label: 'bulk.fHamlogSentDate',  group: 'QSL / upload', kind: 'date' },
+  { id: 'hamlog_rcvd',       label: 'bulk.fHamlogRcvd',      group: 'QSL / upload', kind: 'status' },
+  { id: 'hamlog_rcvd_date',  label: 'bulk.fHamlogRcvdDate',  group: 'QSL / upload', kind: 'date' },
   // My station / operator
   { id: 'station_callsign', label: 'bulk.fStationCall',  group: 'My station', kind: 'text', upper: true },
   { id: 'operator',         label: 'bulk.fOperator',     group: 'My station', kind: 'text', upper: true },
@@ -91,6 +99,17 @@ const FIELDS: FieldDef[] = [
   { id: 'iota',     label: 'bulk.fIota',    group: 'Contacted station', kind: 'text', upper: true },
   { id: 'sig',      label: 'bulk.fSig',     group: 'Contacted station', kind: 'text' },
   { id: 'sig_info', label: 'bulk.fSigInfo', group: 'Contacted station', kind: 'text' },
+  // The contact itself — repair fields, not description fields. An import that
+  // mapped every QSO to SSB, or an ADIF with no MODE at all, is fixed here
+  // instead of one row at a time.
+  //
+  // Band is deliberately absent: it travels with the frequency below, because a
+  // band contradicting its own frequency is invalid ADIF and every export would
+  // carry the contradiction.
+  { id: 'mode',     label: 'bulk.fMode',    group: 'The contact', kind: 'text', upper: true },
+  { id: 'submode',  label: 'bulk.fSubmode', group: 'The contact', kind: 'text', upper: true },
+  { id: 'rst_sent', label: 'bulk.fRstSent', group: 'The contact', kind: 'text' },
+  { id: 'rst_rcvd', label: 'bulk.fRstRcvd', group: 'The contact', kind: 'text' },
   // Misc
   // Frequency (MHz) — sets freq_hz AND recomputes band. Main use: fixing a batch
   // logged on a stale/default frequency after CAT dropped.
@@ -110,7 +129,12 @@ const STATUS_VALUES: { v: string; label: string }[] = [
   { v: '_', label: 'bulk.statusBlank' },
 ];
 
-const GROUPS = ['QSL / upload', 'My station', 'Contacted station', 'Contest', 'Propagation', 'Misc'];
+// Derived from the fields themselves, in the order they are declared.
+//
+// This used to be a hand-written list, and a group added to FIELDS but not to it
+// simply never rendered — the fields existed, passed every check, and could not
+// be picked. Two lists that must agree, with nothing to make them.
+const GROUPS = [...new Set(FIELDS.map((f) => f.group))];
 // Maps the internal group key → its i18n label key.
 const GROUP_LABELS: Record<string, string> = {
   'QSL / upload': 'bulk.groupQsl',
@@ -119,6 +143,7 @@ const GROUP_LABELS: Record<string, string> = {
   'Contest': 'bulk.groupContest',
   'Propagation': 'bulk.groupPropagation',
   'Misc': 'bulk.groupMisc',
+  'The contact': 'bulk.groupContact',
 };
 
 type Props = {
@@ -177,7 +202,7 @@ export function BulkEditModal({ open, ids, onClose, onApplied }: Props) {
               <SelectContent>
                 {GROUPS.map((g) => (
                   <div key={g}>
-                    <div className="px-2 py-1 text-[10px] uppercase tracking-wider text-muted-foreground">{t(GROUP_LABELS[g])}</div>
+                    <div className="px-2 py-1 text-[10px] uppercase tracking-wider text-muted-foreground">{GROUP_LABELS[g] ? t(GROUP_LABELS[g]) : g}</div>
                     {FIELDS.filter((f) => f.group === g)
                       .map((f) => ({ f, txt: t(f.label) }))
                       .sort((a, b) => a.txt.localeCompare(b.txt))

frontend/src/components/CallHistoryPanel.tsx

@@ -1,6 +1,7 @@
 import { Star } from 'lucide-react';
 import { Badge } from '@/components/ui/badge';
 import { useI18n } from '@/lib/i18n';
+import { isQSLConfirmed } from '@/lib/qsl';
 import type { WorkedBeforeView } from '@/types';
 
 type WorkedBefore = WorkedBeforeView;
@@ -97,10 +98,10 @@ export function CallHistoryPanel({ wb, busy, currentCall }: Props) {
                     <td className="px-2 py-1 font-mono border-b border-border/40 whitespace-nowrap">{e.rst_sent ?? ''}</td>
                     <td className="px-2 py-1 font-mono border-b border-border/40 whitespace-nowrap">{e.rst_rcvd ?? ''}</td>
                     <td className="px-2 py-1 border-b border-border/40 whitespace-nowrap text-muted-foreground">
-                      {e.lotw_rcvd === 'Y' && (
+                      {isQSLConfirmed(e.lotw_rcvd) && (
                         <span className="inline-block w-[14px] h-[14px] rounded text-center leading-[14px] text-[9px] font-bold text-info-foreground bg-info mr-0.5" title={t('chp.lotwRcvd')}>L</span>
                       )}
-                      {e.qsl_rcvd === 'Y' && (
+                      {isQSLConfirmed(e.qsl_rcvd) && (
                         <span className="inline-block w-[14px] h-[14px] rounded text-center leading-[14px] text-[9px] font-bold text-success-foreground bg-success mr-0.5" title={t('chp.bureauRcvd')}>B</span>
                       )}
                     </td>

frontend/src/components/ChaseNewPanel.tsx

@@ -0,0 +1,218 @@
+// ChaseNewPanel — the stations PSK Reporter is hearing NEAR HERE that are new
+// against the log.
+//
+// A DX cluster tells you what somebody chose to spot. This tells you what is
+// actually being decoded in your own region, which is a different and often
+// larger set: nobody spots the FT8 caller running ten watts from a rare square.
+//
+// The one thing an operator has to know, and the reason for the line at the
+// bottom: PSK Reporter carries DIGITAL MODES ONLY. An empty panel means nothing
+// new is being decoded on FT8/FT4/JS8 near here — not that the band is dead.
+import { useEffect, useMemo, useState } from 'react';
+import { Radar, Loader2, X } from 'lucide-react';
+import { useI18n } from '@/lib/i18n';
+import { markerColour } from '@/lib/spotMarkers';
+import { cn } from '@/lib/utils';
+import { GetChaseNewSpots } from '../../wailsjs/go/main/App';
+
+export interface ChaseNewSpot {
+  call: string;
+  band: string;
+  mode: string;
+  freq_hz?: number;
+  grid?: string;
+  country?: string;
+  cont?: string;
+  dist_km?: number;
+  bearing?: number;
+  status?: string;
+  new_pfx?: boolean;
+  new_grid?: boolean;
+  lotw?: boolean;
+  at: string;
+}
+
+interface Props {
+  // Tuning the rig to a row is the whole point — a station heard on 14.074 is
+  // only useful if you can get there in one click.
+  onPick?: (s: ChaseNewSpot) => void;
+  onClose?: () => void;
+}
+
+// The categories, in priority order. A station can be several at once — a new
+// band AND a new prefix — but a row shows ONE, the first that matches here.
+//
+// The order is by what would make an operator leave what they are doing: a new
+// entity beats a new band on it, which beats a new mode, which beats a new slot;
+// a prefix or a square is worth knowing but never worth interrupting a QSO for.
+// Two badges on one line also made the list unreadable at a glance, which is the
+// only thing this panel is for.
+type Category = 'dxcc' | 'band' | 'mode' | 'slot' | 'pfx' | 'grid';
+
+const CATEGORIES: Array<{ key: Category; labelKey: string; colour: string }> = [
+  { key: 'dxcc', labelKey: 'clg2.newDxcc', colour: 'var(--danger)' },
+  { key: 'band', labelKey: 'clg2.newBand', colour: 'var(--danger)' },
+  { key: 'mode', labelKey: 'clg2.newMode', colour: 'var(--danger)' },
+  { key: 'slot', labelKey: 'clg2.newSlot', colour: 'var(--danger)' },
+  { key: 'pfx', labelKey: 'clg2.newPfx', colour: markerColour('new_pfx') },
+  { key: 'grid', labelKey: 'clg2.newGrid', colour: markerColour('new_grid') },
+];
+
+// categoryOf is the single thing a row says about a station.
+function categoryOf(s: ChaseNewSpot): Category | null {
+  switch (s.status) {
+    case 'new': return 'dxcc';
+    case 'new-band-mode': return 'band';
+    case 'new-band': return 'band';
+    case 'new-mode': return 'mode';
+    case 'new-slot': return 'slot';
+  }
+  if (s.new_pfx) return 'pfx';
+  if (s.new_grid) return 'grid';
+  return null;
+}
+
+const FILTER_KEY = 'opslog.chaseNewFilters';
+
+function loadFilters(): Set<Category> {
+  try {
+    const raw = localStorage.getItem(FILTER_KEY);
+    if (raw) {
+      const list = JSON.parse(raw) as Category[];
+      if (Array.isArray(list)) return new Set(list);
+    }
+  } catch { /* a corrupt preference is not worth a broken panel */ }
+  return new Set(CATEGORIES.map((c) => c.key));
+}
+
+export function ChaseNewPanel({ onPick, onClose }: Props) {
+  const { t } = useI18n();
+  const [spots, setSpots] = useState<ChaseNewSpot[]>([]);
+  const [loaded, setLoaded] = useState(false);
+  const [on, setOn] = useState<Set<Category>>(loadFilters);
+
+  // Polled rather than pushed: the feed can deliver several a second under an
+  // opening, and an event per row would be a redraw per row for a list nobody
+  // reads that fast.
+  useEffect(() => {
+    let alive = true;
+    const tick = async () => {
+      try {
+        const r = ((await GetChaseNewSpots()) ?? []) as ChaseNewSpot[];
+        if (alive) { setSpots(r); setLoaded(true); }
+      } catch { /* the feed may not be up yet */ }
+    };
+    tick();
+    const id = window.setInterval(tick, 5000);
+    return () => { alive = false; window.clearInterval(id); };
+  }, []);
+
+  function toggle(k: Category) {
+    setOn((prev) => {
+      const next = new Set(prev);
+      if (next.has(k)) next.delete(k); else next.add(k);
+      try { localStorage.setItem(FILTER_KEY, JSON.stringify([...next])); } catch { /* not worth failing over */ }
+      return next;
+    });
+  }
+
+  const shown = useMemo(() => {
+    return spots.filter((s) => {
+      const c = categoryOf(s);
+      return c !== null && on.has(c);
+    });
+  }, [spots, on]);
+
+  return (
+    <div className="flex h-full flex-col rounded-md border border-border bg-card overflow-hidden">
+      <div className="flex items-center gap-2 border-b border-border px-2 py-1.5">
+        <Radar className="size-3.5 shrink-0 text-primary" />
+        <span className="shrink-0 text-xs font-semibold">{t('chn.title')}</span>
+
+        {/* Filters, in the same order and colours as the badges they hide. */}
+        <div className="flex flex-1 flex-wrap items-center gap-1">
+          {CATEGORIES.map((c) => (
+            <button
+              key={c.key}
+              type="button"
+              onClick={() => toggle(c.key)}
+              title={t('chn.filterHint')}
+              className={cn(
+                'rounded border px-1 py-px text-[9px] font-bold uppercase tracking-wide transition-colors',
+                on.has(c.key) ? 'border-transparent' : 'border-border text-muted-foreground opacity-50',
+              )}
+              style={on.has(c.key) ? { color: c.colour, borderColor: c.colour } : undefined}
+            >
+              {t(c.labelKey).replace(/^(NEW|NOUV)\s+/i, '')}
+            </button>
+          ))}
+        </div>
+
+        <span className="shrink-0 text-[10px] text-muted-foreground">
+          {loaded ? t('chn.count', { n: shown.length }) : ''}
+        </span>
+        {onClose && (
+          <button
+            type="button"
+            onClick={onClose}
+            title={t('chn.close')}
+            className="shrink-0 rounded p-0.5 text-muted-foreground hover:bg-muted hover:text-foreground"
+          >
+            <X className="size-3.5" />
+          </button>
+        )}
+      </div>
+
+      <div className="flex-1 overflow-y-auto">
+        {!loaded ? (
+          <div className="flex items-center justify-center gap-2 p-3 text-[11px] text-muted-foreground">
+            <Loader2 className="size-3 animate-spin" /> {t('chn.loading')}
+          </div>
+        ) : shown.length === 0 ? (
+          <p className="p-3 text-[11px] text-muted-foreground leading-relaxed">
+            {spots.length === 0 ? t('chn.empty') : t('chn.allFiltered')}
+          </p>
+        ) : (
+          <div className="divide-y divide-border/60">
+            {shown.map((s, i) => {
+              const c = categoryOf(s);
+              const def = CATEGORIES.find((x) => x.key === c);
+              return (
+                <button
+                  key={`${s.call}-${s.band}-${s.mode}-${i}`}
+                  type="button"
+                  onClick={() => onPick?.(s)}
+                  className="flex w-full items-center gap-1.5 px-2 py-1 text-left text-[11px] hover:bg-accent/40"
+                  title={[
+                    s.country,
+                    s.grid,
+                    s.dist_km ? `${s.dist_km} km` : '',
+                    s.freq_hz ? `${(s.freq_hz / 1000).toFixed(1)} kHz` : '',
+                  ].filter(Boolean).join(' · ')}
+                >
+                  <span className="w-[84px] shrink-0 truncate font-mono font-bold">{s.call}</span>
+                  <span className="w-9 shrink-0 font-mono text-muted-foreground">{s.band}</span>
+                  <span className="w-10 shrink-0 truncate text-muted-foreground">{s.mode}</span>
+                  {/* No frequency column: clicking the row tunes the rig to it,
+                      so the number was a thing to read and never to use. It is
+                      still carried on the spot — the click is what needs it —
+                      and shows in the row's tooltip for anyone who wants it.
+                      The country takes the space it freed. */}
+                  <span className="min-w-0 flex-1 truncate text-muted-foreground">{s.country ?? ''}</span>
+                  {def && (
+                    <span className="shrink-0 text-[9px] font-bold" style={{ color: def.colour }}>
+                      {t(def.labelKey)}
+                    </span>
+                  )}
+                  {s.lotw && <span className="shrink-0 text-[9px] text-info" title="LoTW">L</span>}
+                </button>
+              );
+            })}
+          </div>
+        )}
+      </div>
+
+      <p className="border-t border-border px-2 py-1 text-[10px] text-muted-foreground">{t('chn.digitalOnly')}</p>
+    </div>
+  );
+}

frontend/src/components/ClusterGrid.tsx

@@ -1,7 +1,7 @@
 import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import {
   AllCommunityModule, ModuleRegistry,
-  type ColDef, type ColumnState, type GridReadyEvent, type RowClickedEvent,
+  type ColDef, type ColumnState, type GridReadyEvent, type RowClickedEvent, type RowDoubleClickedEvent,
 } from 'ag-grid-community';
 import { hamlogGridTheme } from '@/lib/gridTheme';
 import { AgGridReact } from 'ag-grid-react';
@@ -12,6 +12,8 @@ import {
 import { Button } from '@/components/ui/button';
 import { Checkbox } from '@/components/ui/checkbox';
 import { cleanSpotter, inferSpotMode, spotStatusKey } from '@/lib/spot';
+import { markerColour } from '@/lib/spotMarkers';
+import { applySpotDisplay, readSpotDisplayOptions } from '@/lib/spotDisplay';
 import { loadLocal, loadRemote, saveState, seedLocal, whenGridPrefsReady } from '@/lib/gridPrefs';
 import { useI18n } from '@/lib/i18n';
 
@@ -51,16 +53,35 @@ export type SpotStatusEntry = {
   country?: string;
   continent?: string;
   worked_call?: boolean;
+  // worked_slot: this exact callsign already worked on THIS band and mode.
+  // Always slot-scoped, unlike worked_call which follows the "same slot" option.
+  worked_slot?: boolean;
   new_county?: boolean;
+  // The resolved US county and state, so the grid can SHOW them and not merely
+  // flag them. Filled from the offline ULS store, US callsigns only.
+  county?: string;
+  state?: string;
   new_pota?: boolean;
   new_pfx?: boolean;
   pfx?: string;
+  // lotw: the DX uploads to LoTW, per ARRL user list. Inert until downloaded.
+  lotw?: boolean;
+  spotter_continent?: string;
+  grid?: string;
+  new_grid?: boolean;
+  grid_state?: string;
 };
 
 type Props = {
   rows: ClusterSpot[];
   spotStatus: Record<string, SpotStatusEntry>;
+  // A DOUBLE click works the spot: QSY, mode, callsign, the lot.
   onSpotClick?: (s: ClusterSpot) => void;
+  // A SINGLE click only fills the callsign. Reading the cluster means passing
+  // over dozens of lines, and every pass used to drag the radio with it — one
+  // stray click while looking took the operator off the station they were
+  // working. Looking and going are now two different gestures.
+  onSpotSelect?: (s: ClusterSpot) => void;
 };
 
 const COL_STATE_KEY = 'hamlog.clusterColState.v1';
@@ -96,26 +117,54 @@ type ColEntry = ColDef<ClusterSpot> & { group: string; label: string; defaultVis
 // statusFor resolves the precomputed spot status (new / new-band / new-slot /
 // worked-call) for an ag-Grid cell's row.
 function statusFor(p: any): SpotStatusEntry | undefined {
-  return p?.context?.spotStatus?.[
+  const s = p?.context?.spotStatus?.[
     spotStatusKey(p.data?.dx_call, p.data?.band ?? '', p.data?.comment ?? '', p.data?.freq_hz)
   ];
+  // One chokepoint: the colour, the badges and the Status text all read through
+  // here, so the two display options are applied once rather than in each
+  // renderer — and the band map applies the very same function.
+  return applySpotDisplay(s, readSpotDisplayOptions());
 }
 
-// Spot status is shown by COLOURING THE TEXT, never by a pill or a badge.
+// Spot status is shown on the CELL that carries the fact — filled background for
+// a novelty, tinted text otherwise — never by a pill or a badge.
 //
-// The pills were dropped: a rounded box has its own height and padding, so it
+// The pills were dropped and stay dropped: a rounded box has its own height and
-// sat off the row's baseline and the callsign inside it no longer lined up with
+// padding, so it sat off the row's baseline and the callsign inside it no longer
-// the plain callsigns above and below. A whole column of them read as chrome
+// lined up with the plain callsigns above and below. A whole column of them read
-// rather than as data. Same reasoning — and the same semantic tokens — as the
+// as chrome rather than as data. Same reasoning — and the same semantic tokens —
-// Y/N/R QSL columns in lib/qslStatus.ts.
+// as the Y/N/R QSL columns in lib/qslStatus.ts.
 //
-// Which cell is coloured IS the message, so one colour is enough for all three:
+// Which cell is marked IS the message:
 //
-//   yellow call → new DXCC     yellow band → new band     yellow mode → new mode
+//   filled call → new DXCC    filled band → new band    filled mode → new mode
-//   blue call   → already worked
+//   filled pfx  → new prefix  filled POTA → new park    filled county → new county
+//   blue call   → already worked (not a novelty, so text only)
 const NEW = 'var(--warning)'; // yellow: something here is new
 const WKD = 'var(--info)';    // blue: this callsign is already in the log
 
+// FILLING the cell that carries the fact, rather than only tinting its text.
+//
+// This is not a return to the pills that were dropped. A pill is a box INSIDE
+// the cell: it has its own height and padding, so it sat off the row baseline
+// and the callsign inside it stopped lining up with the plain callsigns above
+// and below. A cell background has no geometry of its own — the text does not
+// move by a single pixel — and it reads from across the room, which a tinted
+// glyph does not.
+//
+// Which cell is filled is still the whole message: filled Band means new band,
+// filled Pfx means new prefix, filled County means new county.
+//
+// The colours come from the same places they already came from — the semantic
+// status tokens and lib/spotMarkers — so a fact keeps one colour across the
+// grid, the band map and the filter chips. 22 % is the wash that survived both
+// themes: enough to see at a glance, not enough to fight the text on it.
+const fillStyle = (colour: string) => ({
+  background: `color-mix(in srgb, ${colour} 22%, transparent)`,
+  color: colour,
+  fontWeight: 700,
+});
+
 // cellText renders a cell value in an optional colour. An empty value keeps the
 // muted dash the grid used before, so blank cells still read as "nothing here"
 // rather than as a gap.
@@ -131,15 +180,30 @@ function cellText(value: any, color: string | null): any {
 function statusColor(s: SpotStatusEntry | undefined): string | null {
   switch (s?.status) {
     case 'new':
+    case 'new-band-mode':
     case 'new-band':
     case 'new-mode':
     case 'new-slot':
+    case 'new-call':
       return NEW;
     default:
       return s?.worked_call ? WKD : null;
   }
 }
 
+// isDull reports a spot that "represents nothing" under the current worked/slot
+// rules: the entity/band/mode is already worked (status resolved, not new in any
+// dimension), the callsign itself isn't in the log, and there's no POTA / county
+// / prefix novelty. Such rows are dimmed so the eye skips them. Because the
+// status obeys the DX-cluster "same slot" option and the digital-mode grouping,
+// what counts as dull follows those settings automatically. Unresolved statuses
+// (still loading, or entity unknown) are NOT dimmed — that would flicker.
+function isDull(s: SpotStatusEntry | undefined): boolean {
+  if (!s || !s.status) return false;
+  if (s.status === 'new' || s.status === 'new-band-mode' || s.status === 'new-band' || s.status === 'new-mode' || s.status === 'new-slot' || s.status === 'new-call') return false;
+  return !(s.worked_call || s.new_pota || s.new_county || s.new_pfx || s.new_grid);
+}
+
 const makeColCatalog = (t: TFn): ColEntry[] => [
   {
     group: 'Spot', label: t('clg2.c.time'),  colId: 'time',
@@ -163,12 +227,27 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     headerName: t('clg2.c.call'), field: 'dx_call' as any, width: 120,
     defaultVisible: true,
     cellClass: 'font-mono',
-    // NEW DXCC → yellow call. Already worked → blue call. Anything else keeps
+    // NEW DXCC fills the call cell. Already worked only tints the text blue:
-    // the theme's normal ink so ordinary callsigns don't shout.
+    // 'worked' is not a novelty, and filling it would wash most of the rows.
+    cellStyle: (p: any) => (statusFor(p)?.status === 'new' ? fillStyle('var(--danger)') : null) as any,
     cellRenderer: (p: any) => {
       const s = statusFor(p);
-      const color = s?.status === 'new' ? NEW : s?.worked_call ? WKD : null;
+      const color = s?.status === 'new' ? null : s?.worked_call ? WKD : null;
-      return <span style={{ color: color ?? undefined, fontWeight: 700 }}>{p.value ?? ''}</span>;
+      return (
+        <span style={{ color: color ?? undefined, fontWeight: 700 }}>
+          {p.value ?? ''}
+          {/* A single letter rather than a word: the column is 120 px and holds a
+              callsign. It stays the muted-blue of a confirmation, never a status
+              colour — whether a station uploads to LoTW says nothing about
+              whether the spot is worth chasing. */}
+          {s?.lotw ? (
+            <span title={t('clu.lotwBadge')} style={{
+              marginLeft: 4, padding: '0 3px', borderRadius: 3, fontSize: 9, verticalAlign: 'middle',
+              background: 'color-mix(in srgb, var(--info) 22%, transparent)', color: 'var(--info)',
+            }}>L</span>
+          ) : null}
+        </span>
+      );
     },
     tooltipValueGetter: (p: any) => {
       const s = statusFor(p);
@@ -187,35 +266,50 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
       const s = statusFor(p);
       const parts: string[] = [];
       if (s?.status === 'new') parts.push(t('clg2.newDxcc'));
+      else if (s?.status === 'new-band-mode') parts.push(t('clg2.newBandMode'));
       else if (s?.status === 'new-band') parts.push(t('clg2.newBand'));
       else if (s?.status === 'new-mode') parts.push(t('clg2.newMode'));
       else if (s?.status === 'new-slot') parts.push(t('clg2.newSlot'));
+      else if (s?.status === 'new-call') parts.push(t('clg2.newCall'));
       else if (s?.worked_call) parts.push(t('clg2.wkdCall'));
       if (s?.new_county) parts.push(t('clg2.newCounty'));
       if (s?.new_pota) parts.push(t('clg2.newPota'));
       if (s?.new_pfx) parts.push(t('clg2.newPfx'));
+      if (s?.new_grid) parts.push(s.grid_state === 'unconf' ? t('clg2.newGridUnconf') : t('clg2.newGrid'));
       return parts.join(' ');
     },
     cellRenderer: (p: any) => {
       const s = statusFor(p);
-      const parts: { text: string; color: string }[] = [];
+      const parts: { text: string; color: string; dim?: boolean }[] = [];
       const main = statusColor(s);
       if (main) {
         const label = s?.status === 'new' ? t('clg2.newDxcc')
+          : s?.status === 'new-band-mode' ? t('clg2.newBandMode')
           : s?.status === 'new-band' ? t('clg2.newBand')
             : s?.status === 'new-mode' ? t('clg2.newMode')
               : s?.status === 'new-slot' ? t('clg2.newSlot')
+                : s?.status === 'new-call' ? t('clg2.newCall')
                 : t('clg2.wkdCall');
         parts.push({ text: label, color: main });
       }
-      if (s?.new_county) parts.push({ text: t('clg2.newCounty'), color: 'var(--success)' });
+      // Colours from lib/spotMarkers — shared with the band map so a marker is
-      if (s?.new_pota) parts.push({ text: t('clg2.newPota'), color: 'var(--success)' });
+      // never one colour here and another there.
-      if (s?.new_pfx) parts.push({ text: t('clg2.newPfx'), color: 'var(--caution)' });
+      if (s?.new_county) parts.push({ text: t('clg2.newCounty'), color: markerColour('new_county') });
+      if (s?.new_pota) parts.push({ text: t('clg2.newPota'), color: markerColour('new_pota') });
+      if (s?.new_pfx) parts.push({ text: t('clg2.newPfx'), color: markerColour('new_pfx') });
+      // Worked-but-unconfirmed is a QSL to chase, not a QSO to make. Same hue
+      // held back, so it reads as "less" of the same thing rather than a
+      // different fact — and the label says which.
+      if (s?.new_grid) {
+        parts.push(s.grid_state === 'unconf'
+          ? { text: t('clg2.newGridUnconf'), color: markerColour('new_grid'), dim: true }
+          : { text: t('clg2.newGrid'), color: markerColour('new_grid') });
+      }
       if (parts.length === 0) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
       return (
         <span style={{ whiteSpace: 'nowrap' }}>
           {parts.map((pt, i) => (
-            <span key={i} style={{ color: pt.color, fontWeight: 700 }}>
+            <span key={i} style={{ color: pt.color, fontWeight: 700, opacity: pt.dim ? 0.5 : 1 }}>
               {i > 0 ? ' · ' : ''}{pt.text}
             </span>
           ))}
@@ -225,8 +319,10 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     tooltipValueGetter: (p: any) => {
       const s = statusFor(p);
       if (s?.status === 'new') return t('clg2.tipNewDxcc', { country: s?.country ?? '' });
+      if (s?.status === 'new-band-mode') return t('clg2.tipNewBandMode');
       if (s?.status === 'new-band') return t('clg2.tipNewBand');
       if (s?.status === 'new-slot') return t('clg2.tipNewSlotBand');
+      if (s?.status === 'new-call') return t('clg2.tipNewCall');
       if (s?.worked_call) return t('clg2.tipWorkedCall');
       return undefined;
     },
@@ -235,7 +331,9 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     group: 'Spot', label: t('clg2.c.pota'), colId: 'pota',
     headerName: t('clg2.c.pota'), field: 'pota_ref' as any, width: 92, cellClass: 'font-mono',
     defaultVisible: true,
-    cellStyle: { color: 'var(--success)' },
+    cellStyle: (p: any) => (statusFor(p)?.new_pota
+      ? fillStyle(markerColour('new_pota'))
+      : { color: 'var(--success)' }) as any,
     tooltipValueGetter: (p: any) => (p.data?.pota_name ? t('clg2.tipPota', { name: p.data.pota_name }) : undefined),
   },
   {
@@ -250,9 +348,18 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     headerName: t('clg2.c.band'), field: 'band' as any, width: 75,
     defaultVisible: true,
     cellClass: 'font-mono',
-    // NEW BAND for this entity → the band text turns yellow.
+    // NEW BAND for this entity → the band cell is filled. NEW BAND+MODE fills
-    cellRenderer: (p: any) => cellText(p.value, statusFor(p)?.status === 'new-band' ? NEW : null),
+    // it too: the band really is new, and leaving it plain would say the
-    tooltipValueGetter: (p: any) => (statusFor(p)?.status === 'new-band' ? t('clg2.tipNewBand') : undefined),
+    // opposite of the status column beside it.
+    cellStyle: (p: any) => {
+      const st = statusFor(p)?.status;
+      return (st === 'new-band' || st === 'new-band-mode' ? fillStyle(NEW) : null) as any;
+    },
+    cellRenderer: (p: any) => cellText(p.value, null),
+    tooltipValueGetter: (p: any) => {
+      const st = statusFor(p)?.status;
+      return st === 'new-band-mode' ? t('clg2.tipNewBandMode') : st === 'new-band' ? t('clg2.tipNewBand') : undefined;
+    },
   },
   {
     group: 'Spot', label: t('clg2.c.mode'), colId: 'mode',
@@ -260,13 +367,18 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     defaultVisible: true,
     cellClass: 'font-mono',
     valueGetter: (p: any) => p.data ? inferSpotMode(p.data.comment ?? '', p.data.freq_hz) : '',
-    // Only NEW MODE pills the mode cell — there the mode itself is genuinely new
+    // NEW MODE and NEW BAND+MODE pill the mode cell — in both the mode itself is
-    // for the entity. NEW SLOT means band AND mode were each worked before (just
+    // genuinely new for the entity. NEW SLOT means band AND mode were each worked
-    // not together), so highlighting the mode cell would wrongly imply "CW is new";
+    // before (just not together), so highlighting the mode cell would wrongly
-    // that case is signalled by the Status badge alone.
+    // imply "CW is new"; that case is signalled by the Status badge alone.
-    cellRenderer: (p: any) => cellText(p.value, statusFor(p)?.status === 'new-mode' ? NEW : null),
+    cellStyle: (p: any) => {
+      const st = statusFor(p)?.status;
+      return (st === 'new-mode' || st === 'new-band-mode' ? fillStyle('var(--caution)') : null) as any;
+    },
+    cellRenderer: (p: any) => cellText(p.value, null),
     tooltipValueGetter: (p: any) => {
       const st = statusFor(p)?.status;
+      if (st === 'new-band-mode') return t('clg2.tipNewBandMode');
       if (st === 'new-mode') return t('clg2.tipNewMode');
       if (st === 'new-slot') return t('clg2.tipNewSlot');
       return undefined;
@@ -276,7 +388,37 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     group: 'Spot', label: t('clg2.c.pfx'), colId: 'pfx',
     headerName: t('clg2.c.pfx'), width: 60, cellClass: 'font-mono',
     valueGetter: (p: any) => fmtPfx(p.data?.dx_call ?? ''),
-    cellStyle: { color: 'var(--muted-foreground)' },
+    // NEW PFX fills the prefix cell, in the prefix marker's own colour.
+    cellStyle: (p: any) => (statusFor(p)?.new_pfx
+      ? fillStyle(markerColour('new_pfx'))
+      : { color: 'var(--muted-foreground)' }) as any,
+    tooltipValueGetter: (p: any) => (statusFor(p)?.new_pfx ? t('clg2.tipNewPfx') : undefined),
+  },
+  {
+    group: 'Geo', label: t('clg2.c.grid'), colId: 'grid',
+    headerName: t('clg2.c.grid'), width: 70, cellClass: 'font-mono',
+    // Not on the spot: the square a station announced in a CQ that THIS receiver
+    // decoded over the WSJT-X link, so it is filled for the digital watering
+    // hole being monitored and empty everywhere else. A cluster line carries the
+    // spotter's grid at best, never the DX's.
+    valueGetter: (p: any) => statusFor(p)?.grid ?? '',
+    cellStyle: (p: any) => (statusFor(p)?.new_grid ? fillStyle(markerColour('new_grid')) : null) as any,
+    cellRenderer: (p: any) => cellText(p.value, null),
+    tooltipValueGetter: (p: any) => (statusFor(p)?.new_grid ? t('clg2.tipNewGrid') : undefined),
+  },
+  {
+    group: 'Geo', label: t('clg2.c.county'), colId: 'county',
+    headerName: t('clg2.c.county'), width: 130, cellClass: 'font-mono',
+    // Not on the spot: resolved per callsign from the offline ULS store, so it
+    // stays empty for non-US calls and until that database is downloaded.
+    valueGetter: (p: any) => {
+      const s = statusFor(p);
+      if (!s?.county) return '';
+      return s.state ? s.county + ', ' + s.state : s.county;
+    },
+    cellStyle: (p: any) => (statusFor(p)?.new_county ? fillStyle(markerColour('new_county')) : null) as any,
+    cellRenderer: (p: any) => cellText(p.value, null),
+    tooltipValueGetter: (p: any) => (statusFor(p)?.new_county ? t('clg2.tipNewCounty') : undefined),
   },
   {
     group: 'Geo', label: t('clg2.c.cqz'), colId: 'cqz',
@@ -364,7 +506,7 @@ const GROUP_ORDER = ['Spot', 'Geo'];
 const CLG_GRP_KEYS: Record<string, string> = { Spot: 'clg2.grpSpot', Geo: 'clg2.grpGeo' };
 const groupLabel = (t: TFn, g: string): string => t(CLG_GRP_KEYS[g] ?? g);
 
-export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
+export function ClusterGrid({ rows, spotStatus, onSpotClick, onSpotSelect }: Props) {
   const { t } = useI18n();
   const gridRef = useRef<any>(null);
   const [pickerOpen, setPickerOpen] = useState(false);
@@ -397,6 +539,11 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
 
   const defaultColDef = useMemo<ColDef>(() => ({
     sortable: true, resizable: true, filter: true, suppressMovable: false,
+    // Dim "represents nothing" spots at the CELL level, via a class that
+    // refreshCells re-applies. Doing it with a row STYLE needed redrawRows() on
+    // every status update, which re-rendered the whole grid continuously and
+    // pegged the CPU on a busy cluster (the 0.23.6 slowdown).
+    cellClassRules: { 'opacity-40': (p: any) => isDull(statusFor(p)) },
   }), []);
 
   // Pass spotStatus through AG Grid's context so cell renderers can look up
@@ -406,12 +553,22 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
   const context = useMemo(() => ({ spotStatus }), [spotStatus]);
 
   // Spot statuses arrive asynchronously (~after the rows render). The Call/Band/
-  // Mode cellStyles depend on them but their cell VALUE doesn't change, so ag-grid
+  // Mode cellStyles and the dimmed "represents nothing" class depend on them but
-  // won't re-render those cells on its own — force a refresh so e.g. a worked call
+  // the cell VALUE doesn't change, so ag-grid won't re-render on its own — force a
-  // turns blue once its status loads.
+  // refresh so e.g. a worked call turns blue once its status loads.
+  //
+  // THROTTLED: under an RBN firehose spotStatus updates ~20×/second, and firing a
+  // full refreshCells that often is pure churn on a slow PC. Coalesce the bursts
+  // into one refresh every 200 ms (still imperceptible) instead of one per update.
+  const refreshPending = useRef<number | undefined>(undefined);
   useEffect(() => {
+    if (refreshPending.current !== undefined) return; // a refresh is already queued
+    refreshPending.current = window.setTimeout(() => {
+      refreshPending.current = undefined;
       gridRef.current?.api?.refreshCells({ force: true });
+    }, 200);
   }, [spotStatus]);
+  useEffect(() => () => { if (refreshPending.current !== undefined) window.clearTimeout(refreshPending.current); }, []);
 
   // Restore AFTER the profile scope is known — this grid has no key= remount to
   // save it from reading the wrong (unscoped) cache key at first paint.
@@ -432,6 +589,10 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
   }, []);
 
   function handleRowClicked(e: RowClickedEvent<ClusterSpot>) {
+    if (e.data && onSpotSelect) onSpotSelect(e.data);
+  }
+
+  function handleRowDoubleClicked(e: RowDoubleClickedEvent<ClusterSpot>) {
     if (e.data && onSpotClick) onSpotClick(e.data);
   }
 
@@ -496,6 +657,7 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
             onColumnVisible={saveColumnState}
             onSortChanged={saveColumnState}
             onRowClicked={handleRowClicked}
+            onRowDoubleClicked={handleRowDoubleClicked}
             animateRows={false}
             suppressCellFocus
             getRowId={(p) => `${(p.data as any).received_at}-${(p.data as any).dx_call}-${(p.data as any).source_id}`}
@@ -511,6 +673,17 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
               {t('clg2.pickerDesc')}
             </DialogDescription>
           </DialogHeader>
+          {/* Whole-dialog controls. showAll/hideAll with no group already mean
+              "every column"; only the buttons were missing, so hiding the lot
+              took one click per group. */}
+          <div className="flex items-center gap-1 px-1 text-[11px] text-muted-foreground">
+            <span>{t('clg2.allGroups')}</span>
+            <button type="button" className="text-[11px] text-primary hover:underline px-1"
+              onClick={() => showAll()}>{t('clg2.all')}</button>
+            <span className="opacity-40">·</span>
+            <button type="button" className="text-[11px] text-muted-foreground hover:underline px-1"
+              onClick={() => hideAll()}>{t('clg2.none')}</button>
+          </div>
           <div className="max-h-[60vh] overflow-y-auto py-2">
             {GROUP_ORDER.map((group) => {
               const cols = COL_CATALOG.filter((c) => c.group === group);

frontend/src/components/DetailsPanel.tsx

@@ -42,6 +42,7 @@ export interface DetailsState {
   srx_string?: string;
   stx_string?: string;
   email: string;
+  web?: string;
   // Award references for the contacted station (set via the Awards tab picker).
   // Semicolon-delimited "AWARD@REF" entries, e.g. "POTA@FR-11553;IOTA@EU-064".
   // App.tsx maps these back to pota_ref/sota_ref/iota when saving the QSO.
@@ -69,6 +70,14 @@ interface Props {
   band: string;
   mode: string;
   bands?: string[]; // configured bands for the worked-before matrix columns
+  // When the entry form is empty and a QSO is selected in the log grid, the
+  // Stats (F1) matrix shows THAT contact's entity instead of sitting blank.
+  // Only the matrix is redirected — every other tab still edits the live entry.
+  slotCall?: string;
+  slotBand?: string;
+  slotMode?: string;
+  slotWb?: any;
+  slotWbBusy?: boolean;
   imageUrl?: string;
   onOpenImage?: () => void;
   // Optional controlled active tab (so the app can switch it via keyboard).
@@ -77,6 +86,8 @@ interface Props {
   // When the WinKeyer is active, F1-F12 fire macros, so the tab shortcut is
   // shown as Ctrl+F1…F5 instead of F1…F5.
   keyerActive?: boolean;
+  // Open the QSO editor — makes callsigns clickable in the band-slot drill-down.
+  onEditQso?: (id: number) => void;
 }
 
 export type TabName = 'stats' | 'info' | 'awards' | 'my' | 'extended';
@@ -139,7 +150,7 @@ function Field({ label, span = 1, className, children }: { label: string; span?:
   );
 }
 
-export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
+export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, slotCall, slotBand, slotMode, slotWb, slotWbBusy, tab, onTab, keyerActive, onEditQso }: Props) {
   const { t } = useI18n();
   const [internalOpen, setInternalOpen] = useState<TabName>('stats');
   const open = tab ?? internalOpen; // controlled when `tab` is provided
@@ -272,7 +283,15 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth,
       <div className={cn('flex-1 min-h-0', open === 'stats' ? 'overflow-hidden' : 'overflow-y-auto')}>
       {open === 'stats' && (
         <div className="px-3 py-2.5">
-          <BandSlotGrid wb={wb} busy={!!wbBusy} currentBand={band} currentMode={mode} bands={bands} hasCall={callsign.trim() !== ''}
+          <BandSlotGrid
+            wb={slotCall ? slotWb : wb}
+            busy={slotCall ? !!slotWbBusy : !!wbBusy}
+            currentBand={slotCall ? (slotBand ?? '') : band}
+            currentMode={slotCall ? (slotMode ?? '') : mode}
+            bands={bands}
+            hasCall={slotCall ? true : callsign.trim() !== ''}
+            forCall={slotCall}
+            onEditQso={onEditQso}
             lat={dxLL?.lat} lon={dxLL?.lon} />
         </div>
       )}
@@ -355,12 +374,16 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth,
               <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
             </Field>
           </div>
-          <Field label={t('detp.qslMessage')} span={7}>
+          {/* QSL via gets the room, not the message. Width should follow use, and
-            <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
+              these two are nowhere near equal: a manager's callsign is filled in
-          </Field>
+              constantly and a QSL message almost never. The message had 7 columns
-          <Field label={t('detp.qslVia')} span={5}>
+              of 12 for text most operators never type. */}
+          <Field label={t('detp.qslVia')} span={7}>
             <Input value={details.qsl_via} onChange={(e) => onChange({ qsl_via: e.target.value })} />
           </Field>
+          <Field label={t('detp.qslMessage')} span={5}>
+            <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
+          </Field>
         </div>
       )}
 
@@ -447,18 +470,18 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth,
             </Select>
           </Field>
           <Field label={t('detp.rig')} span={3}>
-            <Input value={details.my_rig} placeholder="Flex 8600" onChange={(e) => onChange({ my_rig: e.target.value })} />
+            <Input value={details.my_rig} onChange={(e) => onChange({ my_rig: e.target.value })} />
           </Field>
           <Field label={t('detp.antenna')} span={3}>
-            <Input value={details.my_antenna} placeholder="UB640" onChange={(e) => onChange({ my_antenna: e.target.value })} />
+            <Input value={details.my_antenna} onChange={(e) => onChange({ my_antenna: e.target.value })} />
           </Field>
           {satelliteMode && (
             <>
               <Field label={t('detp.satName')} span={3}>
-                <Input value={details.sat_name} placeholder="AO-91" onChange={(e) => onChange({ sat_name: e.target.value })} />
+                <Input value={details.sat_name} onChange={(e) => onChange({ sat_name: e.target.value })} />
               </Field>
               <Field label={t('detp.satelliteMode')} span={3}>
-                <Input value={details.sat_mode} placeholder="U/V" onChange={(e) => onChange({ sat_mode: e.target.value })} />
+                <Input value={details.sat_mode} onChange={(e) => onChange({ sat_mode: e.target.value })} />
               </Field>
             </>
           )}
@@ -476,8 +499,14 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth,
           <Field label="STX">
             <Input value={details.stx_string ?? ''} placeholder={t('detp.sentExchangePh')} onChange={(e) => onChange({ stx_string: e.target.value })} />
           </Field>
-          <Field label={t('detp.contactedEmail')} span={3}>
+          {/* No placeholder: a greyed-out sample address in an empty field reads
-            <Input value={details.email} placeholder="[email protected]" onChange={(e) => onChange({ email: e.target.value })} />
+              as a value the lookup found, and that is exactly the field an
+              operator checks to see whether it found one. */}
+          <Field label={t('detp.contactedEmail')} span={2}>
+            <Input value={details.email} onChange={(e) => onChange({ email: e.target.value })} />
+          </Field>
+          <Field label={t('detp.contactedWeb')}>
+            <Input value={details.web ?? ''} onChange={(e) => onChange({ web: e.target.value })} />
           </Field>
         </div>
       )}

frontend/src/components/ElecraftPanel.tsx

@@ -0,0 +1,314 @@
+import { useEffect, useRef, useState } from 'react';
+import { Radio, Power, Activity, AudioLines, SlidersHorizontal } from 'lucide-react';
+import {
+  GetKenwoodState, RefreshKenwood, SetKenwoodPower, SetKenwoodAFGain, SetKenwoodTX, TuneKenwoodATU,
+  SetKenwoodRFGain, SetKenwoodMicGain, SetKenwoodSquelch, SetKenwoodPreamp, SetKenwoodAtt,
+  SetKenwoodNB, SetKenwoodNR, SetKenwoodAGC, SetKenwoodFilter, SetKenwoodAntenna,
+  SetKenwoodRIT, SetKenwoodXIT, ClearKenwoodRIT, SetKenwoodKeySpeed, ToggleKenwoodATU,
+  GetCATState,
+} from '../../wailsjs/go/main/App';
+import { cn } from '@/lib/utils';
+import { useI18n } from '@/lib/i18n';
+import { sMeterRST } from '@/lib/rst';
+import { MeterBar } from '@/components/MeterBar';
+import { WheelRange } from '@/components/WheelRange';
+
+type KenwoodState = {
+  available: boolean; model?: string; elecraft: boolean; mode?: string;
+  transmitting: boolean; split: boolean; split_tx_hz?: number;
+  s_meter: number; s_meter_raw: number;
+  power_meter: number; swr: number; swr_raw: number;
+  rf_power: number; af_gain: number; rf_gain: number; mic_gain: number; squelch: number;
+  preamp: boolean; att: boolean; nb: boolean; nr: boolean; agc?: string;
+  filter_hz: number; antenna: number; rit: boolean; xit: boolean; key_speed: number;
+  meters_provisional: boolean;
+};
+
+const ZERO: KenwoodState = {
+  available: false, elecraft: false, transmitting: false, split: false,
+  s_meter: 0, s_meter_raw: 0, power_meter: 0, swr: 0, swr_raw: 0,
+  rf_power: 0, af_gain: 0, rf_gain: 0, mic_gain: 0, squelch: 0,
+  preamp: false, att: false, nb: false, nr: false,
+  filter_hz: 0, antenna: 0, rit: false, xit: false, key_speed: 0,
+  meters_provisional: true,
+};
+
+// Filter widths worth a button. CW work happens at 200-500 Hz, SSB at 2.4-2.8
+// kHz; the rest of the range is reachable from the radio's own knob, and a
+// panel offering thirty widths is slower to use than the knob it replaces.
+const FILTERS = [200, 400, 700, 1000, 1800, 2400, 2800];
+
+// Raw S-meter → S units. The K3 answers 0-21 across S0…S9+60; S9 is taken at
+// raw 9 and each step above it as 6 dB. PROVISIONAL, like the rest of the
+// scaling: the raw value is on screen and in the log, so a real radio settles
+// it rather than this comment.
+const S9_RAW = 9;
+const DB_PER_RAW = 6;
+function sParts(rawV: number): { s: number; over: number; label: string } {
+  if (rawV >= S9_RAW) {
+    const over = Math.max(0, Math.round((rawV - S9_RAW) * DB_PER_RAW));
+    return { s: 9, over, label: over > 0 ? `S9+${over}` : 'S9' };
+  }
+  const s = Math.max(0, Math.min(9, rawV));
+  return { s, over: 0, label: `S${s}` };
+}
+
+// Segment colour, printed the way a radio's own meter is: green up to S9, amber
+// through the S9+ range, red once the signal would be reported as 59+20 or more.
+function sSegColor(frac: number) {
+  if (frac > 0.78) return '#dc2626';
+  if (frac > 0.55) return '#f59e0b';
+  return '#16a34a';
+}
+
+// The card shell the Yaesu and Icom consoles use, so the three read alike.
+function Card({ icon: Icon, title, children }: { icon: any; title: string; children: React.ReactNode }) {
+  return (
+    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden">
+      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
+        <Icon className="size-4 text-primary" />
+        <span className="text-xs font-bold uppercase tracking-wider text-foreground/80">{title}</span>
+      </div>
+      <div className="p-3 space-y-3">{children}</div>
+    </div>
+  );
+}
+
+// One button shape for every on/off control, so the panel reads as one
+// instrument instead of a collection of differently-styled switches.
+function Toggle({ label, on, off, onClick }: { label: string; on: boolean; off: boolean; onClick: () => void }) {
+  return (
+    <button type="button" disabled={off} onClick={onClick}
+      className={cn('px-2 py-1 rounded-md text-[11px] font-bold tracking-wide border transition-all disabled:opacity-30',
+        on ? 'bg-primary text-primary-foreground border-primary' : 'bg-card text-muted-foreground border-border hover:border-primary/60')}>
+      {label}
+    </button>
+  );
+}
+
+export function ElecraftPanel({ onReportRST }: { onReportRST?: (rst: string) => void }) {
+  const { t } = useI18n();
+  const [st, setSt] = useState<KenwoodState>(ZERO);
+  const [freqHz, setFreqHz] = useState(0);
+  const [err, setErr] = useState('');
+  // Optimistic overlay: a slider must follow the finger, not the poll. Dropped
+  // once the radio has had time to answer with the value it actually took.
+  const [local, setLocal] = useState<{ rf_power?: number; af_gain?: number; rf_gain?: number; mic_gain?: number; squelch?: number; key_speed?: number }>({});
+  const localAtRef = useRef(0);
+
+  useEffect(() => {
+    let alive = true;
+    const tick = async () => {
+      try {
+        const s = (await GetKenwoodState()) as KenwoodState;
+        const c = (await GetCATState()) as any;
+        if (!alive) return;
+        setSt(s);
+        setFreqHz(c?.split && c?.freq_rx_hz > 0 ? c.freq_rx_hz : (c?.freq_hz ?? 0));
+        if (Date.now() - localAtRef.current > 1200) setLocal({});
+        setErr('');
+      } catch (e: any) {
+        if (alive) setErr(String(e?.message ?? e));
+      }
+    };
+    tick();
+    const id = window.setInterval(tick, 500);
+    return () => { alive = false; window.clearInterval(id); };
+  }, []);
+
+  const view = { ...st, ...local };
+  const off = !st.available;
+
+  const setErrMsg = (e: any) => setErr(String(e?.message ?? e));
+
+  const put = (patch: typeof local, run: () => Promise<any>) => {
+    setLocal((p) => ({ ...p, ...patch }));
+    localAtRef.current = Date.now();
+    run().catch((e) => setErr(String(e?.message ?? e)));
+  };
+
+  return (
+    <div className="h-full min-h-0 overflow-auto bg-background">
+      {/* Same wrapper as the Yaesu, Icom and Flex consoles: capped width and
+          CENTRED. A console stretched across a 2000 px window puts a slider a
+          hand's width from its own label, and the panel stops reading as one
+          instrument. */}
+      <div className="max-w-5xl mx-auto p-3 space-y-3">
+      {/* VFO + status */}
+      <div className="rounded-xl border border-border bg-card shadow-sm px-4 py-3 flex items-center justify-between gap-3 flex-wrap">
+        <div>
+          <div className="text-[10px] font-bold uppercase tracking-wider text-muted-foreground flex items-center gap-1.5">
+            <Radio className="size-3.5" />
+            {st.elecraft ? 'Elecraft' : 'Kenwood'} {st.model}
+            <span className={cn('size-2 rounded-full', off ? 'bg-muted-foreground/40' : 'bg-success')} />
+          </div>
+          <div className="text-2xl font-mono tabular-nums font-bold">
+            {freqHz > 0 ? (freqHz / 1e6).toFixed(6) : '—'}
+          </div>
+        </div>
+        <button type="button" className="text-[11px] text-muted-foreground hover:text-foreground flex items-center gap-1"
+          onClick={() => RefreshKenwood().catch(() => {})} title={t('k3.refreshHint')}>
+          <SlidersHorizontal className="size-3.5" />
+        </button>
+      </div>
+
+      {off && <div className="text-xs text-muted-foreground px-1">{t('k3.waiting')}</div>}
+      {!!err && <div className="text-[11px] text-danger px-1">{err}</div>}
+
+      {/* Meters */}
+      <Card icon={Activity} title={t('k3.meters')}>
+      <div className="grid grid-cols-1 sm:grid-cols-3 gap-2">
+        <MeterBar label="S-METER" value={view.transmitting ? 0 : view.s_meter} lo={0} hi={100}
+          accent="#16a34a" segColor={sSegColor}
+          display={view.transmitting ? '—' : sParts(view.s_meter_raw).label}
+          onClick={() => {
+            if (view.transmitting || !onReportRST) return;
+            const sp = sParts(view.s_meter_raw);
+            onReportRST(sMeterRST(sp.s, sp.over, view.mode));
+          }}
+          title={t('k3.sMeterHint', { raw: String(view.s_meter_raw) })} />
+        <MeterBar label="PWR" value={view.transmitting ? view.power_meter : 0} lo={0} hi={100} accent="#0ea5e9" />
+        {/* 0 means "not measured", and it must not render as a perfect 1.0:
+            a match that looks ideal on an antenna nobody has measured is the one
+            reading that can cost a radio. */}
+        <MeterBar label="SWR" value={view.transmitting && view.swr > 0 ? view.swr : 1} lo={1} hi={4}
+          accent="#f59e0b"
+          display={view.transmitting && view.swr > 0 ? view.swr.toFixed(1) : '—'} />
+      </div>
+      {view.meters_provisional && (
+        <p className="text-[10px] text-muted-foreground">{t('k3.provisional')}</p>
+      )}
+      </Card>
+
+      {/* MOX + TUNE */}
+      <div className="flex items-center gap-2">
+        <button type="button" disabled={off}
+          onClick={() => SetKenwoodTX(!view.transmitting).catch((e) => setErr(String(e?.message ?? e)))}
+          className={cn('flex-1 px-3 py-2.5 rounded-lg text-sm font-extrabold tracking-wide border-2 transition-all disabled:opacity-30',
+            view.transmitting
+              ? 'bg-danger text-danger-foreground border-danger shadow-[0_0_14px] shadow-danger/50'
+              : 'bg-card text-danger border-danger hover:bg-danger-muted')}>
+          <Power className="size-4 inline mr-1 -mt-0.5" /> MOX
+        </button>
+        <button type="button" disabled={off}
+          onClick={() => TuneKenwoodATU().catch((e) => setErr(String(e?.message ?? e)))}
+          title={t('k3.tuneHint')}
+          className="flex-1 px-3 py-2.5 rounded-lg text-sm font-extrabold tracking-wide border-2 border-warning text-warning bg-card hover:bg-warning-muted transition-all disabled:opacity-30">
+          <Activity className="size-4 inline mr-1 -mt-0.5" /> TUNE
+        </button>
+        {/* The HOLD of the same switch: tuner in line or bypassed. Two buttons
+            because they are two things on the radio — tuning is a cycle you
+            start, bypassing is a state you leave it in. */}
+        <button type="button" disabled={off}
+          onClick={() => ToggleKenwoodATU().catch(setErrMsg)}
+          title={t('k3.atuHint')}
+          className="px-3 py-2.5 rounded-lg text-sm font-extrabold tracking-wide border-2 border-border text-muted-foreground bg-card hover:bg-muted transition-all disabled:opacity-30">
+          ATU
+        </button>
+      </div>
+
+      {/* Levels — two columns, so a slider stays beside the label it belongs to
+          instead of running the width of the window. */}
+      <Card icon={SlidersHorizontal} title={t('k3.levels')}>
+      <div className="grid grid-cols-1 lg:grid-cols-2 gap-x-6 gap-y-2">
+        <label className="flex items-center gap-2 text-xs">
+          <span className="w-16 shrink-0 text-muted-foreground">{t('k3.power')}</span>
+          <WheelRange min={0} max={110} step={5} disabled={off}
+            value={view.rf_power ?? 0}
+            onChange={(n) => put({ rf_power: n }, () => SetKenwoodPower(n))} />
+          <span className="w-12 text-right font-mono tabular-nums">{view.rf_power ?? 0} W</span>
+        </label>
+        <label className="flex items-center gap-2 text-xs">
+          <span className="w-16 shrink-0 text-muted-foreground flex items-center gap-1">
+            <AudioLines className="size-3.5" /> {t('k3.volume')}
+          </span>
+          <WheelRange min={0} max={100} disabled={off}
+            value={view.af_gain ?? 0}
+            onChange={(n) => put({ af_gain: n }, () => SetKenwoodAFGain(n))} />
+          <span className="w-12 text-right font-mono tabular-nums">{view.af_gain ?? 0}</span>
+        </label>
+        <label className="flex items-center gap-2 text-xs">
+          <span className="w-16 shrink-0 text-muted-foreground">{t('k3.rfGain')}</span>
+          <WheelRange min={0} max={100} disabled={off}
+            value={view.rf_gain ?? 0}
+            onChange={(n) => put({ rf_gain: n }, () => SetKenwoodRFGain(n))} />
+          <span className="w-12 text-right font-mono tabular-nums">{view.rf_gain ?? 0}</span>
+        </label>
+        <label className="flex items-center gap-2 text-xs">
+          <span className="w-16 shrink-0 text-muted-foreground">{t('k3.micGain')}</span>
+          <WheelRange min={0} max={100} disabled={off}
+            value={view.mic_gain ?? 0}
+            onChange={(n) => put({ mic_gain: n }, () => SetKenwoodMicGain(n))} />
+          <span className="w-12 text-right font-mono tabular-nums">{view.mic_gain ?? 0}</span>
+        </label>
+        <label className="flex items-center gap-2 text-xs">
+          <span className="w-16 shrink-0 text-muted-foreground">{t('k3.squelch')}</span>
+          <WheelRange min={0} max={100} disabled={off}
+            value={view.squelch ?? 0}
+            onChange={(n) => put({ squelch: n }, () => SetKenwoodSquelch(n))} />
+          <span className="w-12 text-right font-mono tabular-nums">{view.squelch ?? 0}</span>
+        </label>
+        {/* CW keyer speed — the radio's own keyer, the one the K3 sends with. */}
+        <label className="flex items-center gap-2 text-xs">
+          <span className="w-16 shrink-0 text-muted-foreground">{t('k3.keySpeed')}</span>
+          <WheelRange min={8} max={50} disabled={off}
+            value={view.key_speed || 20}
+            onChange={(n) => put({ key_speed: n }, () => SetKenwoodKeySpeed(n))} />
+          <span className="w-12 text-right font-mono tabular-nums">{view.key_speed || 0} wpm</span>
+        </label>
+      </div>
+      </Card>
+
+      {/* Receive chain. Toggles, because that is what they are on the radio:
+          one press each, and the state comes back from the rig rather than from
+          what the button was asked to do. */}
+      <Card icon={AudioLines} title={t('k3.receive')}>
+      <div className="space-y-2">
+        <div className="flex flex-wrap items-center gap-1.5">
+          <Toggle label="PRE" on={view.preamp} off={off} onClick={() => SetKenwoodPreamp(!view.preamp).catch(setErrMsg)} />
+          <Toggle label="ATT" on={view.att} off={off} onClick={() => SetKenwoodAtt(!view.att).catch(setErrMsg)} />
+          <Toggle label="NB" on={view.nb} off={off} onClick={() => SetKenwoodNB(!view.nb).catch(setErrMsg)} />
+          <Toggle label="NR" on={view.nr} off={off} onClick={() => SetKenwoodNR(!view.nr).catch(setErrMsg)} />
+          <span className="w-2" />
+          {['OFF', 'SLOW', 'FAST'].map((a) => (
+            <Toggle key={a} label={a} on={(view.agc || '').toUpperCase() === a} off={off}
+              onClick={() => SetKenwoodAGC(a).catch(setErrMsg)} />
+          ))}
+        </div>
+
+        {/* RIT / XIT. Clear zeroes both offsets at once — the radio's own RC,
+            and what an operator means by "clear it". */}
+        <div className="flex flex-wrap items-center gap-1.5">
+          <Toggle label="RIT" on={view.rit} off={off} onClick={() => SetKenwoodRIT(!view.rit).catch(setErrMsg)} />
+          <Toggle label="XIT" on={view.xit} off={off} onClick={() => SetKenwoodXIT(!view.xit).catch(setErrMsg)} />
+          <Toggle label={t('k3.clear')} on={false} off={off} onClick={() => ClearKenwoodRIT().catch(setErrMsg)} />
+          {/* Antenna only when the radio answered AN — a K3 without the internal
+              ATU has one socket and no switch to offer. */}
+          {view.antenna > 0 && (<>
+            <span className="w-2" />
+            <span className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('k3.antenna')}</span>
+            {[1, 2].map((n) => (
+              <Toggle key={n} label={'ANT' + n} on={view.antenna === n} off={off}
+                onClick={() => SetKenwoodAntenna(n).catch(setErrMsg)} />
+            ))}
+          </>)}
+        </div>
+
+        {/* Filter width */}
+        <div className="flex flex-wrap items-center gap-1.5">
+          <span className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('k3.filter')}</span>
+          {FILTERS.map((hz) => (
+            <Toggle key={hz} label={hz >= 1000 ? (hz / 1000).toFixed(1) + 'k' : String(hz)}
+              on={view.filter_hz === hz} off={off}
+              onClick={() => SetKenwoodFilter(hz).catch(setErrMsg)} />
+          ))}
+          {view.filter_hz > 0 && (
+            <span className="text-[10px] font-mono text-muted-foreground">{view.filter_hz} Hz</span>
+          )}
+        </div>
+      </div>
+      </Card>
+      </div>
+    </div>
+  );
+}

frontend/src/components/ExportFieldsDialog.tsx

@@ -86,6 +86,13 @@ export function ExportFieldsDialog({ open, count, onExport, onClose }: {
     return [...m.entries()];
   }, [official]);
 
+  // Every tag the dialog can offer — the extras AND every group — so "select
+  // all" means what it says rather than "all the official ones".
+  const everyTag = useMemo(
+    () => [...extras, ...groups.flatMap(([, list]) => list.map((d) => d.name))],
+    [extras, groups],
+  );
+
   const toggle = (name: string, on: boolean) =>
     setSel((s) => { const n = new Set(s); if (on) n.add(name); else n.delete(name); return n; });
   const setMany = (names: string[], on: boolean) =>
@@ -114,11 +121,25 @@ export function ExportFieldsDialog({ open, count, onExport, onClose }: {
           <DialogDescription>{t('exf.desc')}</DialogDescription>
         </DialogHeader>
 
+        {/* Whole-dialog select/clear, next to the count they change. Per-group
+            links alone meant clearing the selection was one click PER GROUP —
+            a dozen of them to get to "just the handful I want". */}
         <div className="flex items-center gap-2 px-1 text-[11px] text-muted-foreground">
           <span>{t('exf.chosen', { n: sel.size })}</span>
-          <Button variant="ghost" size="sm" className="ml-auto h-6 text-[11px]" onClick={() => setSel(defaultSet(official))}>
+          <span className="ml-auto inline-flex items-center gap-1">
+            <Button variant="ghost" size="sm" className="h-6 text-[11px]"
+              onClick={() => setSel(new Set(everyTag))}>
+              {t('exf.selectAll')}
+            </Button>
+            <Button variant="ghost" size="sm" className="h-6 text-[11px]"
+              disabled={sel.size === 0}
+              onClick={() => setSel(new Set())}>
+              {t('exf.selectNone')}
+            </Button>
+            <Button variant="ghost" size="sm" className="h-6 text-[11px]" onClick={() => setSel(defaultSet(official))}>
               {t('exf.defaults')}
             </Button>
+          </span>
         </div>
 
         <div className="grid grid-cols-3 gap-3 max-h-[56vh] overflow-y-auto pr-1">

frontend/src/components/FilterBuilder.tsx

@@ -1,4 +1,4 @@
-import { useEffect, useMemo, useState } from 'react';
+import { useEffect, useMemo, useRef, useState } from 'react';
 import { Plus, Trash2, Save, FolderOpen, X } from 'lucide-react';
 import { writeUiPref } from '@/lib/uiPref';
 import { Dialog, DialogContent, DialogHeader, DialogTitle, DialogFooter } from '@/components/ui/dialog';
@@ -13,7 +13,8 @@ import { useI18n } from '@/lib/i18n';
 
 export type FilterOp =
   | 'eq' | 'ne' | 'gt' | 'lt' | 'ge' | 'le'
-  | 'contains' | 'startswith' | 'endswith' | 'empty' | 'notempty';
+  | 'contains' | 'startswith' | 'endswith' | 'empty' | 'notempty'
+  | 'in' | 'notin';
 
 export interface FilterCondition { field: string; op: FilterOp; value: string }
 export interface QueryFilter {
@@ -32,6 +33,8 @@ type FieldType = 'text' | 'number' | 'date' | 'adifdate';
 const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'callsign', label: 'fltb.fCallsign', type: 'text' },
   { value: 'qso_date', label: 'fltb.fDate', type: 'date' },
+  // When the record entered the logbook — the way to isolate what an import added.
+  { value: 'created_at', label: 'fltb.fCreated', type: 'date' },
   { value: 'qso_date_off', label: 'fltb.fEndDate', type: 'date' },
   { value: 'band', label: 'fltb.fBand', type: 'text' },
   { value: 'band_rx', label: 'fltb.fRxBand', type: 'text' },
@@ -67,6 +70,8 @@ const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'qsl_rcvd', label: 'fltb.fQslRcvd', type: 'text' },
   { value: 'qsl_rcvd_date', label: 'fltb.fQslRcvdDate', type: 'adifdate' },
   { value: 'qsl_via', label: 'fltb.fQslVia', type: 'text' },
+  { value: 'qsl_sent_via', label: 'fltb.fQslSentVia', type: 'text' },
+  { value: 'qsl_rcvd_via', label: 'fltb.fQslRcvdVia', type: 'text' },
   { value: 'lotw_sent', label: 'fltb.fLotwSent', type: 'text' },
   { value: 'lotw_sent_date', label: 'fltb.fLotwSentDate', type: 'adifdate' },
   { value: 'lotw_rcvd', label: 'fltb.fLotwRcvd', type: 'text' },
@@ -83,6 +88,12 @@ const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'clublog_qso_upload_date', label: 'fltb.fClublogSentDate', type: 'adifdate' },
   { value: 'hrdlog_qso_upload_status', label: 'fltb.fHrdlogSent', type: 'text' },
   { value: 'hrdlog_qso_upload_date', label: 'fltb.fHrdlogSentDate', type: 'adifdate' },
+  // HAMLOG.online: no promoted column, filtered through extras_json (see
+  // qso.filterableExtras).
+  { value: 'hamlog_sent', label: 'fltb.fHamlogSent', type: 'text' },
+  { value: 'hamlog_sent_date', label: 'fltb.fHamlogSentDate', type: 'adifdate' },
+  { value: 'hamlog_rcvd', label: 'fltb.fHamlogRcvd', type: 'text' },
+  { value: 'hamlog_rcvd_date', label: 'fltb.fHamlogRcvdDate', type: 'adifdate' },
   { value: 'contest_id', label: 'fltb.fContestId', type: 'text' },
   { value: 'srx', label: 'fltb.fSerialRcvd', type: 'number' },
   { value: 'stx', label: 'fltb.fSerialSent', type: 'number' },
@@ -121,9 +132,15 @@ const OPS: { value: FilterOp; label: string }[] = [
   { value: 'le', label: 'fltb.opLe' },
   { value: 'empty', label: 'fltb.opEmpty' },
   { value: 'notempty', label: 'fltb.opNotEmpty' },
+  // 'in' is what makes a real question askable. Every condition is joined by ONE
+  // AND or OR, so "2 m or 70 cm, in FT8, since January" had no expression: AND
+  // killed the two bands, OR let every FT8 QSO through. The OR lives inside the
+  // condition instead, and the rest keeps ANDing.
+  { value: 'in', label: 'fltb.opIn' },
+  { value: 'notin', label: 'fltb.opNotIn' },
 ];
 
-const TEXT_OPS: FilterOp[] = ['contains', 'startswith', 'endswith', 'eq', 'ne', 'empty', 'notempty'];
+const TEXT_OPS: FilterOp[] = ['contains', 'startswith', 'endswith', 'eq', 'ne', 'in', 'notin', 'empty', 'notempty'];
 const NUM_OPS: FilterOp[] = ['eq', 'ne', 'gt', 'lt', 'ge', 'le', 'empty', 'notempty'];
 
 function opsFor(field: string): { value: FilterOp; label: string }[] {
@@ -183,6 +200,17 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
 
   function apply() { onApply(buildFilter()); }
 
+  // Same silence as the alert rules: the preset landed in the list, but the list
+  // is not where the operator is looking when they press Save.
+  const [savedMsg, setSavedMsg] = useState('');
+  const savedTimer = useRef(0);
+  function flashSaved(text: string) {
+    setSavedMsg(text);
+    window.clearTimeout(savedTimer.current);
+    savedTimer.current = window.setTimeout(() => setSavedMsg(''), 3000);
+  }
+  useEffect(() => () => window.clearTimeout(savedTimer.current), []);
+
   function saveCurrentPreset() {
     const name = presetName.trim();
     if (!name) return;
@@ -190,6 +218,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
     savePresets(next);
     setPresets(next);
     setPresetName('');
+    flashSaved(t('fltb.presetSaved', { name }));
   }
   function loadPreset(name: string) {
     const f = presets[name];
@@ -257,6 +286,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
           )}
           {conditions.map((c, i) => {
             const needsValue = c.op !== 'empty' && c.op !== 'notempty';
+            const isList = c.op === 'in' || c.op === 'notin';
             const fieldType = FIELDS.find((f) => f.value === c.field)?.type ?? 'text';
             return (
               <div key={i} className="flex items-center gap-2">
@@ -281,19 +311,28 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
                   // An ADIF date is picked with a calendar but STORED as the
                   // 8-digit form the column holds, so the comparison stays a
                   // plain string one on both sides.
-                  type={fieldType === 'date' || fieldType === 'adifdate' ? 'date' : fieldType === 'number' ? 'number' : 'text'}
+                  // A list is typed by hand, commas and all, so it stays a text
+                  // box even on a date or number field: a calendar cannot express
+                  // "any one of these".
+                  type={isList ? 'text'
+                    : fieldType === 'date' || fieldType === 'adifdate' ? 'date'
+                      : fieldType === 'number' ? 'number' : 'text'}
                   className="h-8 flex-1 text-xs"
                   disabled={!needsValue}
-                  placeholder={needsValue ? (fieldType === 'date' ? 'YYYY-MM-DD' : t('fltb.valuePh')) : '—'}
+                  placeholder={!needsValue ? '—'
+                    : isList ? t('fltb.listPh')
+                      : fieldType === 'date' ? 'YYYY-MM-DD' : t('fltb.valuePh')}
                   // \d, not d: the escape was missing, so the test never matched
                   // an 8-digit ADIF date and the calendar input was handed
                   // "20260728" — which type=date rejects, showing an empty box
                   // over a value that was really there.
-                  value={fieldType === 'adifdate' && /^\d{8}$/.test(c.value)
+                  // The ADIF reshaping is skipped for a list: it would eat the
+                  // commas and leave one unreadable run of digits.
+                  value={!isList && fieldType === 'adifdate' && /^\d{8}$/.test(c.value)
                     ? `${c.value.slice(0, 4)}-${c.value.slice(4, 6)}-${c.value.slice(6, 8)}`
                     : c.value}
                   onChange={(e) => setCond(i, {
-                    value: fieldType === 'adifdate' ? e.target.value.replace(/-/g, '') : e.target.value,
+                    value: !isList && fieldType === 'adifdate' ? e.target.value.replace(/-/g, '') : e.target.value,
                   })}
                   onKeyDown={(e) => { if (e.key === 'Enter') apply(); }}
                 />
@@ -316,6 +355,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
           <Button variant="outline" size="sm" className="h-8" disabled={!presetName.trim()} onClick={saveCurrentPreset}>
             <Save className="size-3.5 mr-1" /> {t('fltb.savePreset')}
           </Button>
+          {savedMsg && <span className="text-[11px] text-success truncate">{savedMsg}</span>}
         </div>
         </div>
 

frontend/src/components/FlexPanel.tsx

@@ -8,6 +8,7 @@ import {
   GetTunerGeniusStatus, GetTunerGeniusSettings,
   GetAmpStatuses, AmpOperate, AmpPower, AmpPowerLevel,
   FlexSetAGCMode, FlexSetAGCThreshold, FlexSetAudioLevel, FlexSetMute, FlexSetRXAntenna, FlexSetTXAntenna, FlexSetSplit, FlexSetActiveSlice, FlexSetTXSlice,
+  GetFlexRSTChase, SaveFlexRSTChase, SetFlexRSTChaseEnabled,
   FlexSetRIT, FlexSetRITFreq, FlexSetXIT, FlexSetXITFreq,
   FlexSetNB, FlexSetNBLevel, FlexSetNR, FlexSetNRLevel, FlexSetANF, FlexSetANFLevel,
   FlexSetLMSNR, FlexSetLMSNRLevel, FlexSetLMSANF, FlexSetLMSANFLevel,
@@ -304,6 +305,25 @@ function powerLevelLabel(pl?: string): string {
 // host can keep the WinKeyer (which actually sends the macros) in sync.
 export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number) => void; onReportRST?: (rst: string) => void } = {}) {
   const { t } = useI18n();
+  // Split-pile-up chaser (see flexrstchase.go). Held here so the button can
+  // paint its state without polling the backend for it.
+  const [rstChase, setRstChase] = useState<{ enabled: boolean; markers: string; offset_hz: number; split_only: boolean }>(
+    { enabled: false, markers: '599', offset_hz: 0, split_only: true });
+  const [rstChaseOffsetText, setRstChaseOffsetText] = useState('0');
+  // The marker text is edited as raw text and only parsed on blur: it is a
+  // comma-separated list, and normalising it on every keystroke would eat the
+  // comma the moment it is typed.
+  const [rstChaseMarkersText, setRstChaseMarkersText] = useState('599');
+  // The marker field is summoned by right-clicking the button, not parked on
+  // the row: it is set once to agree with SDC and then never touched, while the
+  // row it was sitting in is the busiest in the panel.
+  const [rstChaseEditing, setRstChaseEditing] = useState(false);
+  useEffect(() => {
+    GetFlexRSTChase().then((c: any) => {
+      if (!c) return;
+      setRstChase(c); setRstChaseOffsetText(String(c.offset_hz ?? 0)); setRstChaseMarkersText(String(c.markers ?? '599'));
+    }).catch(() => {});
+  }, []);
   const [st, setSt] = useState<FlexState>(ZERO);
   // Extra/"advanced" DSP rows (WNB + the SmartSDR v4 NRL/NRS/NRF/ANFL/AI-FFT
   // block) collapse behind a button so the RECEIVE card doesn't grow tall — only
@@ -652,6 +672,64 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   st.split ? 'bg-info text-info-foreground border-info shadow-[0_0_12px] shadow-info/50' : 'bg-card text-info border-info hover:bg-info-muted')}>
                 SPLIT
               </button>
+              {/* The split chaser. On the panel and not in a settings page:
+                  it is switched on when a DXpedition appears and off when it is
+                  in the log, which is done mid-QSO with one hand. The offset
+                  sits beside it because it is the one number retuned while
+                  chasing — everything else about the feature is configured once. */}
+              {/* CW ONLY. The marker comes from a skimmer decoding a CW report,
+                  so on SSB or FT8 there is nothing to chase — and a switch that
+                  cannot fire is an invitation to wonder why it does nothing. */}
+              {isCW && (<>
+              <button type="button" disabled={off}
+                title={t('flxp.rstChaseHint', { m: rstChase.markers })}
+                onContextMenu={(e) => { e.preventDefault(); setRstChaseEditing(true); }}
+                onClick={() => { const on = !rstChase.enabled; setRstChase({ ...rstChase, enabled: on }); SetFlexRSTChaseEnabled(on).catch(() => {}); }}
+                className={cn('px-3 py-1.5 rounded-lg text-sm font-extrabold tracking-wide border-2 transition-all disabled:opacity-30',
+                  rstChase.enabled ? 'bg-success text-success-foreground border-success shadow-[0_0_12px] shadow-success/50' : 'bg-card text-success border-success hover:bg-success-muted')}>
+                {rstChase.markers.split(',')[0].trim() || '599'}
+              </button>
+              {/* The marker is whatever SDC was told to write — "599", "5NN", or
+                  several. It has to agree with the skimmer or nothing ever fires,
+                  so it is edited here rather than in a settings page — but only
+                  when asked for, since it is set once and then left alone. */}
+              {rstChaseEditing && (
+                <input type="text" autoFocus value={rstChaseMarkersText}
+                  onChange={(e) => setRstChaseMarkersText(e.target.value)}
+                  onKeyDown={(e) => {
+                    if (e.key === 'Enter') (e.target as HTMLInputElement).blur();
+                    if (e.key === 'Escape') { setRstChaseMarkersText(rstChase.markers); setRstChaseEditing(false); }
+                  }}
+                  onBlur={() => {
+                    const v = rstChaseMarkersText.trim() || '599';
+                    setRstChaseMarkersText(v);
+                    setRstChaseEditing(false);
+                    if (v === rstChase.markers) return;
+                    const next = { ...rstChase, markers: v };
+                    setRstChase(next); SaveFlexRSTChase(next as any).catch(() => {});
+                  }}
+                  title={t('flxp.rstChaseMarkerHint')}
+                  className="w-16 h-6 rounded border border-input bg-background px-1 text-[11px] font-mono uppercase" />
+              )}
+              {rstChase.enabled && (
+                <label className="flex items-center gap-1 text-[11px] text-muted-foreground whitespace-nowrap ml-2">
+                  {t('flxp.rstChaseOffset')}
+                  <input type="number" step={10} value={rstChaseOffsetText}
+                    onChange={(e) => setRstChaseOffsetText(e.target.value)}
+                    onBlur={() => {
+                      // Kept as text while typing: normalising every keystroke
+                      // makes a minus sign impossible to enter.
+                      const n = Math.round(Number(rstChaseOffsetText));
+                      const v = Number.isFinite(n) ? n : 0;
+                      setRstChaseOffsetText(String(v));
+                      const next = { ...rstChase, offset_hz: v };
+                      setRstChase(next); SaveFlexRSTChase(next as any).catch(() => {});
+                    }}
+                    className="w-12 h-6 rounded border border-input bg-background px-1 text-[11px] font-mono" />
+                  Hz
+                </label>
+              )}
+              </>)}
               {st.split && !!st.tx_freq_hz && (
                 <span className="text-[11px] font-mono text-muted-foreground whitespace-nowrap">
                   TX {(st.tx_freq_hz / 1e6).toFixed(3)}

frontend/src/components/GridSquareMap.tsx

@@ -0,0 +1,308 @@
+import { useEffect, useMemo, useRef, useState } from 'react';
+import L from 'leaflet';
+import 'leaflet/dist/leaflet.css';
+import { Loader2, RefreshCw } from 'lucide-react';
+import { GridSquares } from '../../wailsjs/go/main/App';
+import { gridSquareBounds, gridToLatLon } from '@/lib/maidenhead';
+import { useI18n } from '@/lib/i18n';
+import { cn } from '@/lib/utils';
+import { BASEMAPS, addBasemap, loadBasemap, type BasemapKey } from '@/components/MainMap';
+import { writeUiPref } from '@/lib/uiPref';
+
+// GridSquareMap — every Maidenhead square in the log, drawn on a world map.
+//
+// A square, not a marker. The question this answers is "where have I been
+// heard", and the shape of the answer is an area: a wall of squares across the
+// Atlantic and a bare Pacific says something about an antenna that a scatter of
+// pins does not. Confirmed and merely worked are two fills of the same hue —
+// the distinction is a STATE of one thing, not two categories, so it must not
+// be two unrelated colours.
+//
+// 4 characters, never 6: at world zoom a 6-character square is sub-pixel, and
+// aggregating to the big square is also how the count means "contacts in this
+// square" rather than "contacts at this exact spot".
+
+type Square = { grid: string; count: number; confirmed: boolean; band?: string; mode?: string };
+
+// The SAME basemaps the Main-tab world map offers, imported rather than copied:
+// two lists of tile servers is how one map ends up on a provider the other has
+// already been blocked by. This map opened on a hardcoded dark Carto, which is
+// the least legible of the four under translucent squares.
+
+// Leaflet geometry is painted onto a CANVAS, and canvas takes a colour, not a
+// stylesheet: "var(--success)" handed to fillStyle is simply invalid and the
+// shape is silently not drawn — a map with a correct square count and nothing
+// on it. So the token is RESOLVED to its literal value here, once per theme,
+// which is also why every other map in this app passes hex.
+// The Earth, in the projection's own terms. Latitude stops at ±85.0511 because
+// that is where Web Mercator does.
+const WORLD_BOUNDS = L.latLngBounds(L.latLng(-85.0511, -180), L.latLng(85.0511, 180));
+
+function cssColour(token: string, fallback: string): string {
+  try {
+    const v = getComputedStyle(document.documentElement).getPropertyValue(token).trim();
+    return v || fallback;
+  } catch { return fallback; }
+}
+
+// Mode scope. The names come straight from the backend's own classes ("ALL",
+// "PHONE", "CW", "DIGI") plus FTX, which is narrower than digital and usually
+// the honest one beside an FTx panel — a square worked on RTTY in a contest is
+// not a square worked on FT8.
+const SCOPES = [
+  { key: 'ALL', label: 'gsm.all' },
+  { key: 'PHONE', label: 'gsm.phone' },
+  { key: 'CW', label: 'gsm.cw' },
+  { key: 'DIGI', label: 'gsm.digital' },
+  { key: 'FTX', label: 'gsm.ftx' },
+] as const;
+type ScopeKey = typeof SCOPES[number]['key'];
+
+const SCOPE_KEY = 'opslog.gridMapScope';
+// Chosen fill colours. Empty means "follow the theme", which is the default and
+// stays the default: the tokens already track the four themes, and freezing a
+// hex at first run would leave a dark-theme map painted in the light palette.
+const COL_CONFIRMED_KEY = 'opslog.gridMapColorConfirmed';
+const COL_WORKED_KEY = 'opslog.gridMapColorWorked';
+
+// A colour input only accepts #rrggbb. The theme tokens ARE plain hex today, so
+// this normally just passes them through — but a token that ever becomes oklch()
+// or a named colour would silently drive the swatch to black, and a fallback is
+// cheaper than that debugging session.
+function asHex(v: string, fallback: string): string {
+  return /^#[0-9a-f]{6}$/i.test(v.trim()) ? v.trim() : fallback;
+}
+
+export function GridSquareMap({ myGrid, className }: { myGrid?: string; className?: string }) {
+  const { t } = useI18n();
+  const hostRef = useRef<HTMLDivElement>(null);
+  const mapRef = useRef<L.Map | null>(null);
+  const layerRef = useRef<L.LayerGroup | null>(null);
+  const [squares, setSquares] = useState<Square[] | null>(null);
+  const [busy, setBusy] = useState(false);
+  const [err, setErr] = useState('');
+  const [scope, setScope] = useState<ScopeKey>(
+    () => (SCOPES.some((s) => s.key === localStorage.getItem(SCOPE_KEY))
+      ? (localStorage.getItem(SCOPE_KEY) as ScopeKey) : 'DIGI'));
+
+  const [basemap, setBasemap] = useState<BasemapKey>(loadBasemap);
+  const [confColour, setConfColour] = useState(() => localStorage.getItem(COL_CONFIRMED_KEY) ?? '');
+  const [workedColour, setWorkedColour] = useState(() => localStorage.getItem(COL_WORKED_KEY) ?? '');
+  // Repaint the squares when the THEME changes, not the basemap: the fills come
+  // from theme tokens resolved at draw time, so a theme switch leaves them on
+  // the old palette until something forces a redraw.
+  const [themeTick, setThemeTick] = useState(0);
+  useEffect(() => {
+    const obs = new MutationObserver(() => setThemeTick((n) => n + 1));
+    obs.observe(document.documentElement, { attributes: true, attributeFilter: ['data-theme'] });
+    return () => obs.disconnect();
+  }, []);
+
+  const load = async (sc: ScopeKey = scope) => {
+    setBusy(true); setErr('');
+    try {
+      const r = (await GridSquares(sc)) as any;
+      setSquares((Array.isArray(r) ? r : []) as Square[]);
+    } catch (e: any) {
+      setErr(String(e?.message ?? e));
+      setSquares([]);
+    } finally { setBusy(false); }
+  };
+  useEffect(() => { void load(scope); /* eslint-disable-next-line react-hooks/exhaustive-deps */ }, [scope]);
+
+  // One-time map creation. preferCanvas: a busy digital log is a few thousand
+  // rectangles, and as SVG that is a few thousand DOM nodes to lay out on every
+  // pan.
+  useEffect(() => {
+    if (!hostRef.current || mapRef.current) return;
+    const m = L.map(hostRef.current, {
+      preferCanvas: true,
+      zoomControl: true,
+      attributionControl: true,
+      // ONE world, not a row of them. worldCopyJump exists to make a path look
+      // continuous across the date line; here it only meant the same continent
+      // appeared two or three times, each carrying the same squares.
+      worldCopyJump: false,
+      // Zoom 0 is the whole planet in 256 pixels — the level at which Greenland
+      // and Antarctica are both on screen. The old floor of 1 made that
+      // impossible on any window wider than it is tall: one step out was already
+      // too far in.
+      minZoom: 0,
+      maxBoundsViscosity: 1, // don't let a drag slide the world off to one side
+    }).setView([20, 0], 2);
+    // The whole world, once, whatever the window is shaped like — computed by
+    // Leaflet from the container rather than guessed with a zoom number.
+    m.fitWorld({ animate: false });
+    // Latitude only: the poles are the edge of the projection and there is
+    // nothing beyond them, while leaving longitude free keeps a drag from
+    // fighting the operator near the date line.
+    m.setMaxBounds(L.latLngBounds(L.latLng(-85, -Infinity), L.latLng(85, Infinity)));
+    mapRef.current = m;
+    layerRef.current = L.layerGroup().addTo(m);
+    // Leaflet measures its container ONCE, when the map is created, and never
+    // looks again. Here that measurement happens while the panel is still
+    // laying out — so the map kept the height it had at that instant and the
+    // rest of the panel stayed blank underneath it, whatever the window size.
+    // Watching the host is the only fix that also survives a window resize, a
+    // split-pane drag and the tab being shown for the first time.
+    // fitWorld above ran against a container that may still have had no size —
+    // the tab is mounted hidden. Fit ONCE more the first time it really has one,
+    // and never again: after that the view belongs to the operator.
+    let fitted = false;
+    const ro = new ResizeObserver(() => {
+      m.invalidateSize({ animate: false });
+      const el = hostRef.current;
+      if (!fitted && el && el.clientWidth > 0 && el.clientHeight > 0) {
+        fitted = true;
+        m.fitWorld({ animate: false });
+      }
+    });
+    ro.observe(hostRef.current);
+    return () => { ro.disconnect(); m.remove(); mapRef.current = null; layerRef.current = null; };
+  }, []);
+
+  // The chosen basemap, shared with the Main-tab map so picking one there and
+  // finding another here cannot happen.
+  const baseRef = useRef<L.TileLayer | null>(null);
+  const labelsRef = useRef<L.TileLayer | null>(null);
+  useEffect(() => {
+    const m = mapRef.current;
+    if (!m) return;
+    // noWrap stops the world REPEATING; bounds stops Leaflet asking for the
+    // empty columns either side of it. What is left beside the planet is then
+    // the panel's own background rather than a wall of grey apologies.
+    addBasemap(m, basemap, baseRef, labelsRef, { noWrap: true, bounds: WORLD_BOUNDS });
+    baseRef.current?.bringToBack();
+  }, [basemap]);
+
+  // Redraw the squares.
+  useEffect(() => {
+    const layer = layerRef.current;
+    if (!layer) return;
+    layer.clearLayers();
+    // Resolved once for the whole redraw, not per square: getComputedStyle
+    // forces a style flush, and doing that a thousand times is a visible stall.
+    const confirmedColour = confColour || cssColour('--success', '#16a34a');
+    const workedFill = workedColour || cssColour('--chart-1', '#2a78d6');
+    const meColour = cssColour('--warning', '#f59e0b');
+    for (const sq of squares ?? []) {
+      const b = gridSquareBounds(sq.grid);
+      if (!b) continue;
+      // One hue, two states. Confirmed is the solid, saturated one; worked is
+      // the same colour held back — so the eye reads "more" and "less" of the
+      // same thing rather than two unrelated facts.
+      const colour = sq.confirmed ? confirmedColour : workedFill;
+      L.rectangle([[b.south, b.west], [b.north, b.east]], {
+        color: colour,
+        weight: 0.5,
+        opacity: sq.confirmed ? 0.9 : 0.5,
+        fillColor: colour,
+        fillOpacity: sq.confirmed ? 0.55 : 0.22,
+      })
+        .bindTooltip(
+          `${sq.grid} — ${sq.count} QSO${sq.count > 1 ? 's' : ''}` +
+          `${sq.band ? ` · ${sq.band}` : ''}${sq.mode ? ` ${sq.mode}` : ''}` +
+          `${sq.confirmed ? ` · ${t('gsm.confirmed')}` : ''}`,
+          { sticky: true },
+        )
+        .addTo(layer);
+    }
+    // The operator's own square, so the pattern has an origin to be read from.
+    const me = myGrid ? gridToLatLon(myGrid) : null;
+    if (me) {
+      L.circleMarker([me.lat, me.lon], {
+        radius: 4, color: meColour, weight: 2,
+        fillColor: meColour, fillOpacity: 1,
+      }).bindTooltip(myGrid!.toUpperCase(), { sticky: true }).addTo(layer);
+    }
+  }, [squares, myGrid, t, themeTick, confColour, workedColour]);
+
+  const stats = useMemo(() => {
+    const list = squares ?? [];
+    return { total: list.length, confirmed: list.filter((s) => s.confirmed).length };
+  }, [squares]);
+
+  return (
+    // isolate is load-bearing, not tidiness. Leaflet puts its panes at z-index
+    // 400 and its zoom control at 1000, in the PAGE's stacking context — and the
+    // modals here are z-50. Without a stacking context of its own the map floats
+    // over Preferences and hides the Save and Close buttons. isolation:isolate
+    // confines every z-index Leaflet sets to this element.
+    <section className={cn('isolate relative flex flex-col min-h-0 rounded-lg border border-border bg-card overflow-hidden', className)}>
+      <header className="flex items-center gap-2 px-2.5 py-1.5 border-b border-border bg-muted/40 shrink-0 flex-wrap">
+        <span className="text-xs font-semibold uppercase tracking-wider text-muted-foreground">
+          {t('gsm.title')}
+        </span>
+        <div className="inline-flex rounded-md border border-border overflow-hidden">
+          {SCOPES.map((s, i) => (
+            <button key={s.key} type="button"
+              onClick={() => { setScope(s.key); try { localStorage.setItem(SCOPE_KEY, s.key); } catch { /* quota */ } }}
+              className={cn('px-1.5 h-6 text-[11px] whitespace-nowrap', i > 0 && 'border-l border-border',
+                scope === s.key ? 'bg-primary text-primary-foreground' : 'hover:bg-muted text-muted-foreground')}>
+              {t(s.label)}
+            </button>
+          ))}
+        </div>
+        <span className="text-[11px] text-muted-foreground tabular-nums">
+          {t('gsm.count', { n: stats.total, c: stats.confirmed })}
+        </span>
+        <select
+          value={basemap}
+          onChange={(e) => { const v = e.target.value as BasemapKey; setBasemap(v); writeUiPref('opslog.mapBasemap', v); }}
+          title={t('gsm.basemap')}
+          className="h-6 rounded border border-border bg-background px-1 text-[11px]"
+        >
+          {(Object.keys(BASEMAPS) as BasemapKey[]).map((k) => (
+            <option key={k} value={k}>{BASEMAPS[k].label}</option>
+          ))}
+        </select>
+        {/* Beside the basemap, because they answer the same question: what this
+            map looks like. Written straight through — there is no Save here. */}
+        <label className="inline-flex items-center gap-1 text-[11px] text-muted-foreground" title={t('gsm.colConfirmed')}>
+          <input type="color" className="size-5 rounded border border-border bg-transparent p-0 cursor-pointer"
+            value={asHex(confColour || cssColour('--success', '#16a34a'), '#16a34a')}
+            onChange={(e) => { setConfColour(e.target.value); writeUiPref(COL_CONFIRMED_KEY, e.target.value); }} />
+          {t('gsm.confirmed')}
+        </label>
+        <label className="inline-flex items-center gap-1 text-[11px] text-muted-foreground" title={t('gsm.colWorked')}>
+          <input type="color" className="size-5 rounded border border-border bg-transparent p-0 cursor-pointer"
+            value={asHex(workedColour || cssColour('--chart-1', '#2a78d6'), '#2a78d6')}
+            onChange={(e) => { setWorkedColour(e.target.value); writeUiPref(COL_WORKED_KEY, e.target.value); }} />
+          {t('gsm.worked')}
+        </label>
+        {(confColour || workedColour) && (
+          <button type="button" title={t('gsm.colReset')}
+            onClick={() => {
+              setConfColour(''); setWorkedColour('');
+              writeUiPref(COL_CONFIRMED_KEY, ''); writeUiPref(COL_WORKED_KEY, '');
+            }}
+            className="text-[11px] text-muted-foreground hover:text-foreground px-1">↺</button>
+        )}
+        <span className="flex-1" />
+        <button type="button" onClick={() => void load()} disabled={busy} title={t('gsm.refresh')}
+          className="inline-flex items-center justify-center size-6 rounded border border-border hover:bg-muted disabled:opacity-50">
+          {busy ? <Loader2 className="size-3 animate-spin" /> : <RefreshCw className="size-3" />}
+        </button>
+      </header>
+      {err && <p className="px-2.5 py-1 text-[11px] text-destructive shrink-0">{err}</p>}
+      {/* The map host must have a real height or Leaflet renders nothing at all
+          — flex-1 + min-h-0, never a percentage. */}
+      {/* The ground beside the planet is the panel's own background: Leaflet
+          paints its container, and left to its default that surround was a
+          bright white slab against a dark theme. */}
+      <div ref={hostRef} className="flex-1 min-h-0 bg-card" />
+      <footer className="flex items-center gap-3 px-2.5 py-1 border-t border-border bg-muted/30 shrink-0 text-[10px] text-muted-foreground">
+        <span className="inline-flex items-center gap-1.5">
+          <span className="inline-block size-2.5 rounded-[2px]"
+            style={{ background: confColour || 'var(--success)', opacity: 0.75 }} />
+          {t('gsm.confirmed')}
+        </span>
+        <span className="inline-flex items-center gap-1.5">
+          <span className="inline-block size-2.5 rounded-[2px]"
+            style={{ background: workedColour || 'var(--chart-1)', opacity: 0.35 }} />
+          {t('gsm.worked')}
+        </span>
+      </footer>
+    </section>
+  );
+}

frontend/src/components/IcomPanel.tsx

@@ -47,12 +47,33 @@ const ZERO: IcomState = {
 
 // Band buttons jump the VFO to a sensible default frequency (SSB/CW mix) using
 // the plain SetFrequency command — no band-stacking codes needed. Hz values.
-const BANDS: { l: string; hz: number }[] = [
+type Band = { l: string; hz: number };
+
+const HF_BANDS: Band[] = [
   { l: '160', hz: 1_840_000 }, { l: '80', hz: 3_750_000 }, { l: '40', hz: 7_100_000 },
   { l: '30', hz: 10_130_000 }, { l: '20', hz: 14_150_000 }, { l: '17', hz: 18_130_000 },
   { l: '15', hz: 21_250_000 }, { l: '12', hz: 24_950_000 }, { l: '10', hz: 28_400_000 },
-  { l: '6', hz: 50_150_000 },
 ];
+const B6 = { l: '6', hz: 50_150_000 };
+const B2 = { l: '2', hz: 144_300_000 };       // SSB calling
+const B70 = { l: '70cm', hz: 432_200_000 };   // SSB calling
+const B23 = { l: '23cm', hz: 1_296_200_000 }; // SSB calling
+
+// Band buttons jump the VFO to a sensible default frequency (SSB/CW mix) using
+// the plain SetFrequency command — no band-stacking codes needed.
+//
+// Which buttons to OFFER depends on the radio, exactly as the attenuator steps
+// do below. An IC-9700 has no HF at all, yet the console was showing it 160
+// through 6 and none of the bands it actually covers: ten dead buttons, and no
+// way to change band from here on the only rig where you would want to.
+function bandsFor(model?: string): Band[] {
+  const m = (model ?? '').toUpperCase();
+  if (m.includes('9700')) return [B2, B70, B23];          // VHF/UHF/SHF only
+  if (m.includes('705')) return [...HF_BANDS, B6, B2, B70];
+  if (m.includes('9100')) return [...HF_BANDS, B6, B2, B70, B23];
+  // 7300 / 7610 / 7100 / unknown: HF + 6 m, the historical list.
+  return [...HF_BANDS, B6];
+}
 
 // Mode buttons for the console (like RS-BA1's row). SetCATMode picks USB/LSB for
 // SSB by frequency and the rig's data variant for digital modes.
@@ -85,7 +106,10 @@ function bandOfHz(hz?: number): string {
     ['160', 1.8, 2.0], ['80', 3.5, 4.0], ['60', 5.25, 5.45], ['40', 7.0, 7.3],
     ['30', 10.1, 10.15], ['20', 14.0, 14.35], ['17', 18.068, 18.168],
     ['15', 21.0, 21.45], ['12', 24.89, 24.99], ['10', 28.0, 29.7],
-    ['6', 50.0, 54.0], ['4', 70.0, 70.5], ['2', 144.0, 148.0], ['70', 430.0, 450.0],
+    // Labels must match the band buttons' exactly — this is only used to light
+    // the button for the band the rig is on, and '70' never matched '70cm'.
+    ['6', 50.0, 54.0], ['4', 70.0, 70.5], ['2', 144.0, 148.0],
+    ['70cm', 430.0, 450.0], ['23cm', 1240.0, 1300.0],
   ];
   for (const [name, lo, hi] of bands) if (mhz >= lo && mhz <= hi) return name;
   return '';
@@ -749,7 +773,7 @@ export function IcomPanel({ onReportRST, isNetwork = false }: { onReportRST?: (r
       {/* Band buttons + antenna selection. */}
       <Card icon={Antenna} title={t('icmp.bandsAntenna')} accent="#0891b2">
         <div className="grid grid-cols-5 gap-1.5">
-          {BANDS.map((b) => {
+          {bandsFor(st.model).map((b) => {
             const here = bandOfHz(mainHz) === b.l;
             return (
               <button key={b.l} type="button" onClick={() => SetCATFrequency(b.hz).catch(() => {})}

frontend/src/components/LogViewer.tsx

@@ -21,7 +21,13 @@ import { TailLogFile, GetLogFilePath } from '../../wailsjs/go/main/App';
 //     256 KB blob: with "cluster" or "acom" typed in, the window becomes exactly
 //     the subsystem trace you would have grepped for.
 //   • It polls only while open. A closed dialog costs nothing.
-const TAIL_BYTES = 256 * 1024;
+// 512 KB ≈ 3200 lines. The window is a sliding tail: once new lines push past it
+// the oldest fall out of the fetched text entirely, so a small buffer dropped
+// lines the operator was still reading during a busy trace (CAT/cluster/antenna
+// polling). This is double the old 256 KB — 1 MB was tried but the per-second
+// fetch + split + re-render of ~6500 lines made the window lag. 512 KB keeps a
+// useful backlog while staying smooth. The backend caps this at 4 MB.
+const TAIL_BYTES = 512 * 1024;
 const POLL_MS = 1000;
 
 export function LogViewer({ open, onOpenChange }: { open: boolean; onOpenChange: (v: boolean) => void }) {

frontend/src/components/MainMap.tsx

@@ -43,24 +43,35 @@ function unwrapLon(ring: [number, number][]): [number, number][] {
 }
 
 const CARTO_LIGHT = 'https://{s}.basemaps.cartocdn.com/light_all/{z}/{x}/{y}{r}.png';
-const OSM = 'https://{s}.tile.openstreetmap.org/{z}/{x}/{y}.png';
 const CARTO_ATTR = '© OpenStreetMap © CARTO';
-const OSM_ATTR = '© OpenStreetMap contributors';
+
+// NOT tile.openstreetmap.org. Those are OpenStreetMap's VOLUNTEER-run servers,
+// and their usage policy does not cover a desktop application handed to an
+// unbounded number of operators — they blocked OpsLog for it, and every user's
+// map filled with "Access blocked / 403" tiles at once.
+//
+// The replacements are tile services whose terms do cover redistributed apps,
+// with no API key: Carto (whose tiles are OSM-derived, hence the attribution
+// still credits OpenStreetMap) and Esri. Anything added here later must be
+// checked the same way — a free tile URL is not the same thing as a tile URL we
+// are allowed to ship.
+const ESRI_STREET = 'https://server.arcgisonline.com/ArcGIS/rest/services/World_Street_Map/MapServer/tile/{z}/{y}/{x}';
+const ESRI_STREET_ATTR = 'Tiles © Esri — Source: Esri, HERE, Garmin, © OpenStreetMap contributors';
 
 // Selectable basemaps for the world (great-circle) map. All key-free and all
 // LABELLED (country/continent names). `labelsUrl` adds a transparent place-name
 // overlay on top of an imagery basemap (so satellite keeps its names too).
-type BasemapKey = 'light' | 'voyager' | 'street' | 'satellite';
+export type BasemapKey = 'light' | 'voyager' | 'street' | 'satellite';
-const BASEMAPS: Record<BasemapKey, { label: string; url: string; attr: string; subdomains?: string; labelsUrl?: string }> = {
+export const BASEMAPS: Record<BasemapKey, { label: string; url: string; attr: string; subdomains?: string; labelsUrl?: string }> = {
   light:     { label: 'Light',     url: CARTO_LIGHT, attr: CARTO_ATTR, subdomains: 'abcd' },
   voyager:   { label: 'Voyager',   url: 'https://{s}.basemaps.cartocdn.com/rastertiles/voyager/{z}/{x}/{y}{r}.png',
                attr: CARTO_ATTR, subdomains: 'abcd' },
-  street:    { label: 'Street',    url: OSM, attr: OSM_ATTR },
+  street:    { label: 'Street',    url: ESRI_STREET, attr: ESRI_STREET_ATTR },
   satellite: { label: 'Satellite', url: 'https://server.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer/tile/{z}/{y}/{x}',
                attr: 'Tiles &copy; Esri — Source: Esri, Maxar, Earthstar Geographics',
                labelsUrl: 'https://server.arcgisonline.com/ArcGIS/rest/services/Reference/World_Boundaries_and_Places/MapServer/tile/{z}/{y}/{x}' },
 };
-function loadBasemap(): BasemapKey {
+export function loadBasemap(): BasemapKey {
   const v = localStorage.getItem('opslog.mapBasemap');
   return v === 'voyager' || v === 'street' || v === 'satellite' ? v : 'light';
 }
@@ -69,18 +80,32 @@ function loadBasemap(): BasemapKey {
 // place-name overlay. updateWhenIdle/keepBuffer keep the number of live tiles
 // down: satellite loads TWO tile layers, so its tile count — and the composited
 // layers WebView2 has to hold — is double every other basemap's.
-function addBasemap(
+export function addBasemap(
   m: L.Map,
   key: BasemapKey,
   base: React.MutableRefObject<L.TileLayer | null>,
   labels: React.MutableRefObject<L.TileLayer | null>,
+  // noWrap draws the world ONCE instead of repeating it east and west.
+  //
+  // The great-circle map wants the repeats: a path from France to Japan reads
+  // better crossing a second copy of Asia than wrapping round the back. A map of
+  // where you have been heard does not — three North Americas is three times the
+  // same answer, and it makes the picture harder to read, not wider.
+  // bounds stops Leaflet asking for tiles outside the world at all: Esri answers
+  // those with a grey "Map data not yet available" image, and zoomed out on a
+  // wide window that is most of the screen.
+  opts?: { noWrap?: boolean; bounds?: L.LatLngBoundsExpression },
 ) {
   if (base.current) { m.removeLayer(base.current); base.current = null; }
   if (labels.current) { m.removeLayer(labels.current); labels.current = null; }
   const bm = BASEMAPS[key];
-  const opts: L.TileLayerOptions = { maxZoom: 19, updateWhenIdle: true, updateWhenZooming: false, keepBuffer: 1 };
+  const tileOpts: L.TileLayerOptions = {
-  base.current = L.tileLayer(bm.url, { ...opts, attribution: bm.attr, subdomains: bm.subdomains ?? 'abc' }).addTo(m);
+    maxZoom: 19, updateWhenIdle: true, updateWhenZooming: false, keepBuffer: 1,
-  if (bm.labelsUrl) labels.current = L.tileLayer(bm.labelsUrl, opts).addTo(m);
+    noWrap: !!opts?.noWrap,
+    ...(opts?.bounds ? { bounds: opts.bounds } : {}),
+  };
+  base.current = L.tileLayer(bm.url, { ...tileOpts, attribution: bm.attr, subdomains: bm.subdomains ?? 'abc' }).addTo(m);
+  if (bm.labelsUrl) labels.current = L.tileLayer(bm.labelsUrl, tileOpts).addTo(m);
 }
 
 function dot(color: string): L.DivIcon {
@@ -341,7 +366,10 @@ export function WorldMap({ fromGrid, toGrid, fromLabel, toLabel, beamAzimuths, b
     <div className="relative isolate h-full w-full rounded-lg overflow-hidden border border-border">
       <div ref={worldRef} className="absolute inset-0" />
       {/* Basemap picker — Light / Street / Satellite (key-free tiles). */}
-      <div className="absolute top-1 left-12 z-[500] flex rounded-md overflow-hidden shadow border border-border backdrop-blur">
+      {/* Clear of the zoom buttons, not merely next to them: at left-12 the
+          first basemap sat a few pixels from the − button and operators kept
+          hitting Light when they meant to zoom out. */}
+      <div className="absolute top-1 left-[4.5rem] z-[500] flex rounded-md overflow-hidden shadow border border-border backdrop-blur">
         {(Object.keys(BASEMAPS) as BasemapKey[]).map((k) => (
           <button
             key={k}
@@ -416,7 +444,14 @@ export function LocatorMap({ toGrid, toLabel }: LocatorProps) {
     if (locatorRef.current && !locatorMap.current) {
       const m = L.map(locatorRef.current, { zoomControl: true, attributionControl: true })
         .setView([20, 0], 2);
-      L.tileLayer(OSM, { attribution: OSM_ATTR, maxZoom: 19 }).addTo(m);
+      // Same restraint as the world map: fetch on idle, not mid-pan, and keep a
+      // single ring of buffer tiles. Requesting tiles as fast as the pointer
+      // moves is what gets an app blocked, and the next provider is under no
+      // more obligation to tolerate it than the last one was.
+      L.tileLayer(CARTO_LIGHT, {
+        attribution: CARTO_ATTR, subdomains: 'abcd', maxZoom: 19,
+        updateWhenIdle: true, updateWhenZooming: false, keepBuffer: 1,
+      }).addTo(m);
       locatorOverlay.current = L.layerGroup().addTo(m);
       locatorMap.current = m;
     }

frontend/src/components/MotorAntennaWidget.tsx

@@ -0,0 +1,298 @@
+// MotorAntennaWidget — the Ultrabeam / SteppIR control, in one place.
+//
+// Lives in its own file because it is shown in TWO: the Station Control tab and
+// the dock beside the entry strip. Two copies of a control that keys hardware is
+// how one of them quietly stops matching the other — a pattern button that sets
+// a different direction, a band list that tunes somewhere else.
+import { useCallback, useEffect, useState } from 'react';
+import { ArrowDownToLine, ChevronDown, ChevronUp, Loader2, Minus, Plus, RefreshCw, Antenna as AntennaIcon, X } from 'lucide-react';
+import { cn } from '@/lib/utils';
+import {
+  SetUltrabeamDirection, UltrabeamRetract, MotorSetElement, MotorReadElements,
+  MotorTuneKHz, MotorNudgeKHz, SetMotorFollow,
+} from '../../wailsjs/go/main/App';
+
+export type AntStatus = { enabled: boolean; type: string; connected: boolean; direction: number; frequency: number; moving: boolean; elements: number[]; follow?: boolean; step_khz?: number; track_mode?: string; bands?: string[]; band_freqs?: Record<string, number> };
+
+// Where each band button points the antenna.
+//
+// Not the arithmetic centre of the band. An antenna is tuned for where people
+// actually work: 20 m centres on 14175 but nobody lives there, and 10 m spans
+// 1.7 MHz of which the top half is empty. These are the points that leave the
+// elements closest to right for the whole band, and one nudge away from the rest.
+const ANT_BAND_KHZ: Record<string, number> = {
+  '40m': 7100, '30m': 10125, '20m': 14150, '17m': 18110,
+  '15m': 21150, '12m': 24930, '10m': 28400, '6m': 50150,
+};
+
+// NUDGE_KHZ is the up/down step. 25 kHz because that is also the finest tracking
+// threshold: a nudge smaller than the tracking step would be undone by the next
+// poll while tracking is on.
+const NUDGE_KHZ = 25;
+
+// bandOfKHz names the band a frequency sits in, so a band button can light up
+// when the ANTENNA is already there. Deliberately generous at the edges: the
+// antenna's reported frequency is where it was commanded, which can sit slightly
+// outside the allocation.
+function bandOfKHz(khz: number): string {
+  const edges: [number, number, string][] = [
+    [6900, 7300, '40m'], [10050, 10200, '30m'], [13900, 14400, '20m'],
+    [18000, 18200, '17m'], [20900, 21500, '15m'], [24800, 25000, '12m'],
+    [27900, 29800, '10m'], [49900, 50600, '6m'],
+  ];
+  for (const [lo, hi, b] of edges) if (khz >= lo && khz <= hi) return b;
+  return '';
+}
+
+// MotorAntennaWidget controls a motorized antenna (Ultrabeam / SteppIR) from the
+// Station Control tab: pattern (Normal / 180° / Bi), Retract, and — Ultrabeam
+// only — per-element length adjustment. Heading/state is polled by the panel.
+const ELEMENT_STEP = 2; // the physical console adjusts 2 mm per press
+
+// elementName maps an element index to a ham-radio name: 0 = reflector,
+// 1 = driven element, then Director 1, 2, 3…
+function elementName(i: number, t: (k: string, v?: any) => string): string {
+  if (i === 0) return t('station.reflector');
+  if (i === 1) return t('station.driven');
+  return `${t('station.director')} ${i - 1}`;
+}
+
+export function MotorAntennaWidget({ ant, refetch, t, onClose, essentialsOnly }: {
+  ant: AntStatus;
+  refetch: () => void;
+  t: (k: string, v?: any) => string;
+  // onClose adds the dock's close button. The Station Control tab passes none:
+  // there the widget is a tile in a grid, and a tile that closes itself would
+  // leave a hole the operator cannot fill back in.
+  onClose?: () => void;
+  // essentialsOnly drops what an operator sets once and then leaves alone:
+  // tracking with its mode and step, and the per-element lengths. They belong in
+  // Station Control, where there is room to think; in the dock they are height
+  // spent on controls nobody touches between contacts, pushing the ones they do
+  // touch — pattern, bands, nudge — off the bottom.
+  essentialsOnly?: boolean;
+}) {
+  const [err, setErr] = useState('');
+  const [lengths, setLengths] = useState<number[]>([]); // current element lengths (mm), from ReadElements
+  const [reading, setReading] = useState(false);
+  const [busyEl, setBusyEl] = useState<number | null>(null);
+  const [editingEl, setEditingEl] = useState<number | null>(null); // element whose mm is being typed
+  const [editVal, setEditVal] = useState('');
+  const run = (p: Promise<any>) => p.then(refetch).catch((e) => setErr(String(e?.message ?? e)));
+  const isUB = ant.type !== 'steppir';
+
+  const readLengths = useCallback(async () => {
+    setReading(true); setErr('');
+    try { setLengths(((await MotorReadElements()) ?? []) as number[]); }
+    catch (e: any) { setErr(String(e?.message ?? e)); }
+    finally { setReading(false); }
+  }, []);
+  // Read the current lengths once when the Ultrabeam widget mounts/connects, so
+  // +/- starts from the real values rather than blind.
+  useEffect(() => { if (isUB && ant.connected) readLengths(); }, [isUB, ant.connected, readLengths]);
+
+  // Send an absolute length to one element and remember it as the new baseline.
+  const setLen = async (i: number, mm: number) => {
+    const next = Math.max(0, Math.round(mm));
+    const prev = lengths[i] ?? 0;
+    setBusyEl(i); setErr('');
+    setLengths((ls) => { const c = [...ls]; c[i] = next; return c; }); // optimistic
+    try { await MotorSetElement(i, next); refetch(); }
+    catch (e: any) {
+      // Rejected by the controller — most often the element is at its travel
+      // limit for this band (extending on a low band). Revert the optimistic
+      // value so the display stays truthful, and explain the likely cause when
+      // the failed move was an extension.
+      setLengths((ls) => { const c = [...ls]; c[i] = prev; return c; });
+      setErr(next > prev ? t('station.atMax') : String(e?.message ?? e));
+    }
+    finally { setBusyEl(null); }
+  };
+  // Nudge one element by ±2 mm from its current known length.
+  const nudge = (i: number, delta: number) => setLen(i, (lengths[i] ?? 0) + delta);
+  // Commit a typed exact length (click on the mm value). Lets the operator fix
+  // the baseline when the auto-read is off, so +/- then work reliably.
+  const commitEdit = (i: number) => {
+    const v = parseInt(editVal, 10);
+    setEditingEl(null);
+    if (!isNaN(v) && v >= 0 && v !== lengths[i]) setLen(i, v);
+  };
+  const dirs: [number, string][] = [[0, 'N'], [1, '180°'], [2, t('station.bi')]];
+  return (
+    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full flex flex-col min-h-0">
+      <div className="flex items-center gap-2 px-2 py-1.5 border-b border-border/60 bg-muted/30 shrink-0">
+        <AntennaIcon className="size-4 text-primary" />
+        <div className="min-w-0">
+          <div className="text-sm font-semibold truncate">{isUB ? 'Ultrabeam' : 'SteppIR'}</div>
+          {ant.frequency > 0 && <div className="text-[10px] text-muted-foreground font-mono">{(ant.frequency / 1000).toFixed(3)} MHz</div>}
+        </div>
+        {ant.moving && <span className="ml-auto text-[10px] font-semibold text-warning animate-pulse">{t('station.moving')}</span>}
+        <span className={cn('size-2 rounded-full shrink-0', ant.moving ? '' : 'ml-auto', ant.connected ? 'bg-success' : 'bg-muted-foreground/40')}
+          title={ant.connected ? t('station.online') : t('station.offline')} />
+        {onClose && (
+          <button type="button" onClick={onClose} title={t('station.hideWidget')}
+            className="text-muted-foreground hover:text-foreground shrink-0">
+            <X className="size-3.5" />
+          </button>
+        )}
+      </div>
+      <div className="p-2 space-y-2 flex-1 min-h-0 overflow-auto">
+        <div>
+          {/* No heading: N / 180° / Bi say what they are, and in a docked widget
+              a line of height costs more than the word explains. */}
+          <div className="flex gap-1">
+            {dirs.map(([d, lbl]) => (
+              <button key={d} type="button" disabled={!ant.connected}
+                onClick={() => run(SetUltrabeamDirection(d))}
+                className={cn('flex-1 rounded-md border py-1 text-xs font-semibold transition-colors disabled:opacity-40',
+                  ant.direction === d ? 'bg-primary text-primary-foreground border-primary' : 'border-border hover:bg-muted')}>
+                {lbl}
+              </button>
+            ))}
+          </div>
+        </div>
+        {/* Bands, then a nudge, then tracking — in the order an operator uses
+            them: get to the band, fine-tune inside it, decide whether the
+            antenna should follow the rig from here. */}
+        <div>
+          <div className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground mb-0.5">{t('station.bands')}</div>
+          <div className="grid grid-cols-5 gap-1">
+            {(ant.bands ?? []).map((b: string) => {
+              // Where this band tunes is resolved by the backend — the operator's
+              // per-band choice from Settings, or the default. ANT_BAND_KHZ is only
+              // the floor for a status poll that hasn't landed yet.
+              const khz = ant.band_freqs?.[b] || ANT_BAND_KHZ[b];
+              if (!khz) return null;
+              // "On this band" from the antenna's own frequency, not the rig's:
+              // the widget must show where the ANTENNA is, which is the whole
+              // reason for tuning it by hand.
+              const here = ant.frequency > 0 && bandOfKHz(ant.frequency) === b;
+              return (
+                <button key={b} type="button" disabled={!ant.connected}
+                  onClick={() => run(MotorTuneKHz(khz))}
+                  title={`${(khz / 1000).toFixed(3)} MHz`}
+                  className={cn('rounded-md border py-0.5 text-[11px] font-mono font-semibold transition-colors disabled:opacity-40',
+                    here ? 'bg-primary text-primary-foreground border-primary' : 'border-border hover:bg-muted')}>
+                  {b}
+                </button>
+              );
+            })}
+          </div>
+        </div>
+
+        <div className="flex items-center gap-1">
+          <button type="button" disabled={!ant.connected}
+            onClick={() => run(MotorNudgeKHz(-NUDGE_KHZ))}
+            title={t('station.nudgeDown', { n: NUDGE_KHZ })}
+            className="flex-1 flex items-center justify-center gap-1 rounded-md border border-border py-1 text-xs font-semibold hover:bg-muted disabled:opacity-40">
+            <ChevronDown className="size-3.5" /> {NUDGE_KHZ}
+          </button>
+          <button type="button" disabled={!ant.connected}
+            onClick={() => run(MotorNudgeKHz(NUDGE_KHZ))}
+            title={t('station.nudgeUp', { n: NUDGE_KHZ })}
+            className="flex-1 flex items-center justify-center gap-1 rounded-md border border-border py-1 text-xs font-semibold hover:bg-muted disabled:opacity-40">
+            <ChevronUp className="size-3.5" /> {NUDGE_KHZ}
+          </button>
+        </div>
+
+        {/* Tracking. Here rather than only in Settings because it is an operating
+            decision — off to park the antenna, on to resume — not something set
+            up once. Mode and step only show when tracking is on: settings for
+            something switched off are questions the operator cannot act on. And
+            the step only shows in step mode, where it is the one thing it means. */}
+        {!essentialsOnly && (
+        <div className="space-y-1.5">
+          <div className="flex items-center gap-2">
+            <button type="button"
+              onClick={() => run(SetMotorFollow(!ant.follow, 0, ''))}
+              className={cn('flex-1 rounded-md border py-1 text-xs font-semibold transition-colors',
+                ant.follow ? 'bg-success-muted text-success-muted-foreground border-success-border' : 'border-border hover:bg-muted')}>
+              {ant.follow ? t('station.trackOn') : t('station.trackOff')}
+            </button>
+            {ant.follow && (ant.track_mode || 'step') === 'step' && (
+              <select
+                value={String(ant.step_khz || 50)}
+                onChange={(e) => run(SetMotorFollow(true, parseInt(e.target.value, 10), ''))}
+                className="h-[30px] rounded-md border border-border bg-background px-1 text-xs font-mono"
+                title={t('station.trackStepTip')}
+              >
+                {[25, 50, 100].map((s) => <option key={s} value={s}>{s} kHz</option>)}
+              </select>
+            )}
+          </div>
+          {ant.follow && (
+            <select
+              value={ant.track_mode || 'step'}
+              onChange={(e) => run(SetMotorFollow(true, 0, e.target.value))}
+              className="w-full h-[30px] rounded-md border border-border bg-background px-1.5 text-xs"
+              title={t('station.trackModeTip')}
+            >
+              <option value="always" title={t('station.trackAlwaysTip')}>{t('station.trackAlways')}</option>
+              <option value="step" title={t('station.trackStepTipMode')}>{t('station.trackStep')}</option>
+              <option value="band" title={t('station.trackBandTip')}>{t('station.trackBand')}</option>
+            </select>
+          )}
+        </div>
+        )}
+
+        <button type="button" disabled={!ant.connected}
+          onClick={() => run(UltrabeamRetract())}
+          className="w-full flex items-center justify-center gap-1.5 rounded-md border border-warning-border bg-warning-muted text-warning-muted-foreground py-1 text-xs font-semibold hover:brightness-95 disabled:opacity-40">
+          <ArrowDownToLine className="size-3.5" /> {t('station.retract')}
+        </button>
+
+        {isUB && !essentialsOnly && (
+          <div>
+            <div className="flex items-center gap-2 mb-1.5">
+              <span className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground">{t('station.elements')}</span>
+              <button type="button" onClick={readLengths} disabled={!ant.connected || reading}
+                className="text-[10px] text-primary hover:underline inline-flex items-center gap-1 disabled:opacity-40" title={t('station.readLengths')}>
+                <RefreshCw className={cn('size-3', reading && 'animate-spin')} /> {t('station.read')}
+              </button>
+            </div>
+            {lengths.length === 0 ? (
+              <p className="text-[11px] text-muted-foreground">{t('station.noLengths')}</p>
+            ) : (
+              <div className="space-y-1.5">
+                {/* The READ_BANDS reply is undocumented and its 16-bit parse picks
+                    up structural bytes past the real data (varying by band), which
+                    made 6+ bogus "elements" appear. Ultrabeam beams are 3-element,
+                    and ModifyElement addresses elements 0..2 — so show just those. */}
+                {lengths.map((mm, i) => ({ mm, i })).slice(0, 3).map(({ mm, i }) => (
+                  <div key={i} className="flex items-center gap-2">
+                    <span className="text-xs w-20 shrink-0 text-muted-foreground truncate">{elementName(i, t)}</span>
+                    <button type="button" disabled={!ant.connected || busyEl !== null}
+                      onClick={() => nudge(i, -ELEMENT_STEP)}
+                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
+                      <Minus className="size-3.5" />
+                    </button>
+                    {editingEl === i ? (
+                      <input autoFocus type="number" value={editVal}
+                        onChange={(e) => setEditVal(e.target.value)}
+                        onBlur={() => commitEdit(i)}
+                        onKeyDown={(e) => { if (e.key === 'Enter') commitEdit(i); if (e.key === 'Escape') setEditingEl(null); }}
+                        className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums bg-transparent border border-primary rounded px-1" />
+                    ) : (
+                      <span className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums cursor-pointer hover:underline"
+                        title={t('station.setExactLen')}
+                        onClick={() => { setEditingEl(i); setEditVal(String(mm)); }}>
+                        {busyEl === i ? <Loader2 className="size-3.5 animate-spin inline" /> : `${mm} mm`}
+                      </span>
+                    )}
+                    <button type="button" disabled={!ant.connected || busyEl !== null}
+                      onClick={() => nudge(i, ELEMENT_STEP)}
+                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
+                      <Plus className="size-3.5" />
+                    </button>
+                  </div>
+                ))}
+              </div>
+            )}
+            <p className="text-[10px] text-muted-foreground mt-1">{t('station.elementsHint')}</p>
+          </div>
+        )}
+        {err && <div className="text-[11px] text-destructive break-words">{err}</div>}
+      </div>
+    </div>
+  );
+}

frontend/src/components/NetControlPanel.tsx

@@ -49,6 +49,7 @@ type QSOMenuHandlers = {
   onUpdateFromCty?: (ids: number[]) => void;
   onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;

frontend/src/components/QSLManagerModal.tsx

@@ -8,7 +8,7 @@ import {
   Select, SelectTrigger, SelectValue, SelectContent, SelectItem,
 } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
-import { FindQSOsForUpload, UploadQSOsManual, DownloadConfirmations, SyncPOTAHunterLog, ListQSO, BulkUpdateQSL, UploadCallsign, GetSlotStats } from '../../wailsjs/go/main/App';
+import { FindQSOsForUpload, UploadQSOsManual, DownloadConfirmations, CancelConfirmations, ImportHamlogConfirmations, ExportHamlogUnmatched, OpenADIFFile, SaveADIFFile, SyncPOTAHunterLog, ListQSO, BulkUpdateQSL, UploadCallsign, GetSlotStats } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { RecentQSOsGrid } from '@/components/RecentQSOsGrid';
 import { EventsOn } from '../../wailsjs/runtime/runtime';
@@ -41,6 +41,7 @@ const SERVICES = [
   { v: 'hrdlog',  label: 'HRDLog.net' },
   { v: 'eqsl',    label: 'eQSL.cc' },
   { v: 'lotw',    label: 'LoTW' },
+  { v: 'hamlog',  label: 'HAMLOG.online' },
   { v: 'pota',    label: 'POTA hunter log' },
   { v: 'paper',   label: 'Paper QSL' },
 ];
@@ -54,12 +55,14 @@ const QSL_STATUSES = [
   { v: 'I', label: 'qslm.ignore' },
 ];
 
-// QSL routing methods for the paper-QSL "Via" dropdown (was free text).
+// QSL routing methods for the paper-QSL route dropdowns, one per direction.
+// These are the ADIF QSL Via enumeration (B/D/E) and go to QSL_SENT_VIA and
+// QSL_RCVD_VIA — NOT to QSL_VIA, which holds the manager's callsign.
 const QSL_VIA_OPTIONS = [
   { v: '_', label: 'qslm.leave' },
-  { v: 'Bureau', label: 'qslm.viaBureau' },
+  { v: 'B', label: 'qslm.viaBureau' },
-  { v: 'Direct', label: 'qslm.viaDirect' },
+  { v: 'D', label: 'qslm.viaDirect' },
-  { v: 'Electronic', label: 'qslm.viaElectronic' },
+  { v: 'E', label: 'qslm.viaElectronic' },
 ];
 
 // Maps a service value → its i18n label key (only for services with
@@ -109,7 +112,38 @@ export function fmtQslDate(s?: string): string {
 
 // QSL Manager as an in-app tab panel: upload logged QSOs to online logbooks
 // and download confirmations, while the rest of the app stays usable.
-export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => void } = {}) {
+// GridActions are the row actions the context menu offers, forwarded straight to
+// whichever grid this panel is showing.
+//
+// The FILTERED exports are deliberately absent. "Export everything the filter
+// matches" means the Recent-QSOs filter, and the rows here come from a different
+// query entirely — offering it would export something other than what is on the
+// screen, which is the one thing an export must never do. Selection-based
+// exports have no such ambiguity: the ids are the rows you ticked.
+export type GridActions = {
+  onUpdateFromCty?: (ids: number[]) => void;
+  onUpdateFromQRZ?: (ids: number[]) => void;
+  onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
+  onSendTo?: (service: string, ids: number[]) => void;
+  onSendRecording?: (ids: number[]) => void;
+  onSendEQSL?: (ids: number[]) => void;
+  onBulkEdit?: (ids: number[]) => void;
+  onExportSelected?: (ids: number[]) => void;
+  onExportSelectedFields?: (ids: number[]) => void;
+  onExportCabrilloSelected?: (ids: number[]) => void;
+  onDelete?: (ids: number[]) => void;
+};
+
+export function QSLManagerPanel({ onEditQSO, actions, paperRequest }: {
+  onEditQSO?: (id: number) => void;
+  actions?: GridActions;
+  // A callsign to open the Paper QSL view on, sent from elsewhere in the app
+  // (the awards grid). Carries a counter rather than being a bare string: the
+  // panel is force-mounted and keeps its state, so asking twice for the SAME
+  // callsign has to be two requests, not one unchanged prop.
+  paperRequest?: { call: string; n: number };
+} = {}) {
   const { t } = useI18n();
   const [service, setService] = useState('lotw');
   // The callsign this profile signs/uploads/downloads as for the selected
@@ -120,6 +154,10 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
     if (service === 'pota' || service === 'paper') { setUploadCall(''); return; }
     UploadCallsign(service).then((c) => setUploadCall(c || '')).catch(() => setUploadCall(''));
   }, [service]);
+  // Closing the QSL Manager (the tab's ×) unmounts this panel — cancel any download
+  // still running so a slow QRZ/LoTW sync doesn't keep going in the background and
+  // bleed its log into the next one.
+  useEffect(() => () => { CancelConfirmations().catch(() => {}); }, []);
   const [potaSyncing, setPotaSyncing] = useState(false);
   const [potaRes, setPotaRes] = useState<POTASync | null>(null);
   const [potaErr, setPotaErr] = useState('');
@@ -145,7 +183,8 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
   const [qslSent, setQslSent] = useState('_');
   const [qslRcvdDate, setQslRcvdDate] = useState('');
   const [qslSentDate, setQslSentDate] = useState('');
-  const [qslVia, setQslVia] = useState('_');
+  const [qslVia, setQslVia] = useState('_');       // how the card was SENT
+  const [qslRcvdVia, setQslRcvdVia] = useState('_'); // how it CAME BACK
   const [qslNotes, setQslNotes] = useState('');
   const [qslComment, setQslComment] = useState('');
 
@@ -165,6 +204,27 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
   }, [paperCall]);
 
 
+  // Honour an incoming request: switch to Paper QSL, fill the callsign, search.
+  // The search runs from the effect below once paperCall has actually changed —
+  // searchPaper closes over paperCall, so calling it here would search the
+  // PREVIOUS callsign.
+  // The pending request's callsign, so the search fires for THAT callsign and
+  // for nothing else: the effect below also wakes on every keystroke in the
+  // field, and searching on each of them would query the log letter by letter.
+  const pendingPaperCall = useRef('');
+  useEffect(() => {
+    const call = paperRequest?.call?.trim().toUpperCase();
+    if (!call) return;
+    setService('paper');
+    setPaperCall(call);
+    pendingPaperCall.current = call;
+  }, [paperRequest?.call, paperRequest?.n]);
+  useEffect(() => {
+    if (!pendingPaperCall.current || paperCall !== pendingPaperCall.current) return;
+    pendingPaperCall.current = '';
+    searchPaper();
+  }, [paperCall, searchPaper]);
+
   async function applyPaper() {
     const ids = paperRows.filter((r) => paperSel.has(r.id)).map((r) => r.id);
     if (ids.length === 0) return;
@@ -177,6 +237,7 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
         sent_date: ymd(qslSentDate),
         rcvd_date: ymd(qslRcvdDate),
         via: qslVia === '_' ? '' : qslVia,
+        rcvd_via: qslRcvdVia === '_' ? '' : qslRcvdVia,
         notes: qslNotes,
         comment: qslComment,
       } as any);
@@ -289,6 +350,34 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
     catch (e: any) { setLogLines((p) => [...p, 'Error: ' + String(e?.message ?? e)]); setBusy(false); }
   }
 
+  // HAMLOG.online has no download verb — their agent protocol only uploads —
+  // so confirmations come back as an ADIF exported from their site. It is read
+  // here rather than through the ordinary ADIF import because that one matches
+  // on the UTC minute and INSERTS whatever fails to match: a few hundred copies
+  // of contacts already in the log. This path only ever stamps QSOs it finds.
+  async function importHamlogCfm() {
+    const path = await OpenADIFFile();
+    if (!path) return;
+    setLogLines([]); setBusy(true); setLogAction('download'); setShowLog(true);
+    try { await ImportHamlogConfirmations(path); }
+    catch (e: any) { setLogLines((p) => [...p, 'Error: ' + String(e?.message ?? e)]); setBusy(false); }
+  }
+
+  // The unmatched half of an import. Offered as a file because a few hundred
+  // discrepancies are a list to work through, not something to read in a log
+  // window.
+  async function exportHamlogUnmatched() {
+    try {
+      const path = await SaveADIFFile();
+      if (!path) return;
+      const n = await ExportHamlogUnmatched(path);
+      setLogLines((p) => [...p, `Exported ${n} unmatched confirmation(s) → ${path}`]);
+      setShowLog(true);
+    } catch (e: any) {
+      setLogLines((p) => [...p, 'Error: ' + String(e?.message ?? e)]); setShowLog(true);
+    }
+  }
+
   function viewResults() {
     setShowLog(false);
     if (logAction === 'upload') selectRequired();
@@ -435,6 +524,8 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
                 total={paperRows.length}
                 selectAllSignal={paperSelAllSig}
                 onRowSelected={(ids) => setPaperSel(new Set(ids))}
+                {...actions}
+                onRowDoubleClicked={onEditQSO ? (q) => onEditQSO(q.id as number) : undefined}
               />
             </div>
           )
@@ -541,6 +632,8 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
               total={rows.length}
               selectAllSignal={uploadSelAllSig}
               onRowSelected={onUploadRowSelected}
+              {...actions}
+              onRowDoubleClicked={onEditQSO ? (q) => onEditQSO(q.id as number) : undefined}
             />
           </div>
         )}
@@ -549,6 +642,10 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
       {/* Paper-QSL apply form */}
       {service === 'paper' && (
         <div className="flex items-end flex-wrap gap-3 px-3 py-2 border-t border-border bg-muted/20 shrink-0">
+          {/* Each direction carries its own route, and each sits with the status
+              and date it belongs to. A stack confirmed in one go usually arrived
+              the same way — a bureau delivery is exactly that — which is why the
+              route belongs on this form and not one QSO at a time in the editor. */}
           <div className="flex flex-col gap-1">
             <label className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('qslm.qslReceived')}</label>
             <div className="flex gap-1.5">
@@ -557,6 +654,10 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
                 <SelectContent>{QSL_STATUSES.map((s) => <SelectItem key={s.v} value={s.v}>{t(s.label)}</SelectItem>)}</SelectContent>
               </Select>
               <Input type="date" className="h-8 w-36" value={qslRcvdDate} onChange={(e) => setQslRcvdDate(e.target.value)} title={t('qslm.qslRcvdDateTitle')} />
+              <Select value={qslRcvdVia} onValueChange={setQslRcvdVia}>
+                <SelectTrigger className="h-8 w-32" title={t('qslm.rcvdViaTitle')}><SelectValue /></SelectTrigger>
+                <SelectContent>{QSL_VIA_OPTIONS.map((o) => <SelectItem key={o.v} value={o.v}>{t(o.label)}</SelectItem>)}</SelectContent>
+              </Select>
             </div>
           </div>
           <div className="flex flex-col gap-1">
@@ -567,15 +668,12 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
                 <SelectContent>{QSL_STATUSES.map((s) => <SelectItem key={s.v} value={s.v}>{t(s.label)}</SelectItem>)}</SelectContent>
               </Select>
               <Input type="date" className="h-8 w-36" value={qslSentDate} onChange={(e) => setQslSentDate(e.target.value)} title={t('qslm.qslSentDateTitle')} />
-            </div>
-          </div>
-          <div className="flex flex-col gap-1">
-            <label className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('qslm.via')}</label>
               <Select value={qslVia} onValueChange={setQslVia}>
-              <SelectTrigger className="h-8 w-32"><SelectValue /></SelectTrigger>
+                <SelectTrigger className="h-8 w-32" title={t('qslm.sentViaTitle')}><SelectValue /></SelectTrigger>
                 <SelectContent>{QSL_VIA_OPTIONS.map((o) => <SelectItem key={o.v} value={o.v}>{t(o.label)}</SelectItem>)}</SelectContent>
               </Select>
             </div>
+          </div>
           <div className="flex flex-col gap-1">
             <label className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('qslm.notes')}</label>
             <Input className="h-8 w-40" value={qslNotes} onChange={(e) => setQslNotes(e.target.value)} placeholder={t('qslm.notesPlaceholder')} />
@@ -596,11 +694,25 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
       {service !== 'pota' && service !== 'paper' && (
       <div className="flex items-center justify-between gap-2 px-3 py-2 border-t border-border bg-muted/20 shrink-0">
         <div className="flex items-center gap-2 flex-wrap">
+          {service === 'hamlog' ? (
+            <>
+            <Button variant="outline" size="sm" onClick={importHamlogCfm} disabled={busy}
+              title={t('qslm.hamlogImportTitle')}>
+              <DownloadCloud className="size-3.5" /> {t('qslm.hamlogImportCfm')}
+            </Button>
+            <Button variant="outline" size="sm" onClick={exportHamlogUnmatched} disabled={busy}
+              title={t('qslm.hamlogUnmatchedTitle')}>
+              <UploadCloud className="size-3.5 rotate-180" /> {t('qslm.hamlogUnmatched')}
+            </Button>
+            </>
+          ) : (
           <Button variant="outline" size="sm" onClick={download} disabled={busy}
             title={t('qslm.downloadTitle')}>
             <DownloadCloud className="size-3.5" /> {t('qslm.downloadConf')}
           </Button>
+          )}
           {/* Date window */}
+          {service !== 'hamlog' && (<>
           <Select value={sinceMode} onValueChange={(v) => setSinceMode(v as any)}>
             <SelectTrigger className="h-8 w-[150px] text-xs" title={t('qslm.downloadRangeTitle')}>
               <SelectValue />
@@ -624,6 +736,7 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
             <Checkbox checked={addNotFound} onCheckedChange={(c) => setAddNotFound(!!c)} />
             {t('qslm.addNotFound')}
           </label>
+          </>)}
         </div>
         <Button size="sm" onClick={upload} disabled={selectedCount === 0 || busy}>
           <UploadCloud className="size-3.5" /> {t('qslm.uploadTo', { n: selectedCount, service: serviceLabel })}

frontend/src/components/QSOContextMenu.tsx

@@ -1,5 +1,5 @@
 import { useEffect, useLayoutEffect, useRef, useState } from 'react';
-import { Globe2, RefreshCw, Upload, BadgeCheck, Mail, FileDown, PencilLine, Trash2 } from 'lucide-react';
+import { Globe2, RefreshCw, Upload, BadgeCheck, Mail, FileDown, PencilLine, Trash2, MapPin } from 'lucide-react';
 import { useI18n } from '@/lib/i18n';
 
 export type QSOMenuState = { x: number; y: number; ids: number[] } | null;
@@ -7,16 +7,22 @@ export type QSOMenuState = { x: number; y: number; ids: number[] } | null;
 type Props = {
   menu: QSOMenuState;
   onClose: () => void;
-  onUpdateFromCty: (ids: number[]) => void;
+  onUpdateFromCty?: (ids: number[]) => void;
-  onUpdateFromQRZ: (ids: number[]) => void;
+  onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  // Only passed once the offline US county database has been downloaded —
+  // an entry that can only ever answer "no database" is not worth a line here.
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;
   onBulkEdit?: (ids: number[]) => void;
   onExportSelected?: (ids: number[]) => void;
+  // Same rows, but keeping the APP_OPSLOG_* tags — award references above all.
+  onExportSelectedFull?: (ids: number[]) => void;
   onExportSelectedFields?: (ids: number[]) => void;
   onExportFiltered?: () => void;
+  onExportFilteredFull?: () => void;
   onExportCabrilloSelected?: (ids: number[]) => void;
   onExportCabrilloFiltered?: () => void;
   onDelete?: (ids: number[]) => void;
@@ -28,6 +34,7 @@ const UPLOAD_TARGETS: { service: string; name: string }[] = [
   { service: 'hrdlog', name: 'HRDLog.net' },
   { service: 'eqsl', name: 'eQSL.cc' },
   { service: 'lotw', name: 'LoTW' },
+  { service: 'hamlog', name: 'HAMLOG.online' },
 ];
 
 // Lightweight right-click menu for the QSO grids. AG Grid's native context
@@ -36,7 +43,7 @@ const UPLOAD_TARGETS: { service: string; name: string }[] = [
 // or picks a command. (We deliberately do NOT close on scroll/resize: the QSO
 // list auto-refreshes and AG Grid fires internal scroll events on refresh,
 // which used to dismiss the menu the instant it appeared.)
-export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete }: Props) {
+export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onUpdateCountyFromULS, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFull, onExportSelectedFields, onExportFiltered, onExportFilteredFull, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete }: Props) {
   const { t } = useI18n();
   const boxRef = useRef<HTMLDivElement>(null);
   // Starts at the cursor; the layout effect corrects it once the real size is
@@ -95,6 +102,11 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
       <div className="px-3 py-1 text-[11px] uppercase tracking-wider text-muted-foreground">
         {t('qctx.selected', { n })}
       </div>
+      {/* Conditional like every other entry. These two were drawn
+          unconditionally, and the grid passes them through an arrow that calls
+          an optional handler — so in a grid that wires neither (the QSL
+          Manager) both appeared and did precisely nothing when clicked. */}
+      {onUpdateFromCty && (
         <button
           className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
           onClick={() => { onUpdateFromCty(menu.ids); onClose(); }}
@@ -102,6 +114,8 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
           <Globe2 className="size-4 text-primary" />
           <span>{t('qctx.fixCountry')}</span>
         </button>
+      )}
+      {onUpdateFromQRZ && (
         <button
           className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
           onClick={() => { onUpdateFromQRZ(menu.ids); onClose(); }}
@@ -109,6 +123,7 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
           <RefreshCw className="size-4 text-info" />
           <span>{t('qctx.updateQrz')}</span>
         </button>
+      )}
       {onUpdateFromClublog && (
         <button
           className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
@@ -118,6 +133,16 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
           <span>{t('qctx.updateClublog')}</span>
         </button>
       )}
+      {onUpdateCountyFromULS && (
+        <button
+          className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+          onClick={() => { onUpdateCountyFromULS(menu.ids); onClose(); }}
+          title={t('qctx.updateUlsCountyTitle')}
+        >
+          <MapPin className="size-4 text-info" />
+          <span>{t('qctx.updateUlsCounty')}</span>
+        </button>
+      )}
 
       {(onSendRecording || onSendEQSL) && (
         <>
@@ -168,6 +193,20 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
               <span>{t('qctx.exportSelectedAdif', { n })}</span>
             </button>
           )}
+          {/* The same rows WITH the OpsLog fields.
+              The export above is standard ADIF — what another logger should be
+              given — and it drops every APP_ tag, award references included. A
+              backup, or a move to another OpsLog, needs them: RDA@KR-04 lives in
+              APP_OPSLOG_AWARDREFS and nowhere else. */}
+          {onExportSelectedFull && (
+            <button
+              className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+              onClick={() => { onExportSelectedFull(menu.ids); onClose(); }}
+            >
+              <FileDown className="size-4 text-info" />
+              <span>{t('qctx.exportSelectedAdifFull', { n })}</span>
+            </button>
+          )}
           {onExportSelectedFields && (
             <button
               className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
@@ -186,6 +225,15 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
               <span>{t('qctx.exportFilteredAdif')}</span>
             </button>
           )}
+          {onExportFilteredFull && (
+            <button
+              className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+              onClick={() => { onExportFilteredFull(); onClose(); }}
+            >
+              <FileDown className="size-4 text-info" />
+              <span>{t('qctx.exportFilteredAdifFull')}</span>
+            </button>
+          )}
           {onExportCabrilloSelected && (
             <button
               className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"

frontend/src/components/QSOEditModal.tsx

@@ -1,6 +1,6 @@
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Trash2, Search, Loader2, CalendarDays } from 'lucide-react';
-import { LookupCallsign, LookupCallsignFresh, DXCCForCountry, GetAwardDefs, ComputeQSOAwardRefs, GetListsSettings } from '../../wailsjs/go/main/App';
+import { LookupCallsign, LookupCallsignFresh, DXCCForCountry, GetAwardDefs, ComputeQSOAwardRefs, GetListsSettings, OpenExternalURL, SetOpsLogQSLReceived } from '../../wailsjs/go/main/App';
 import { rstOptions, type RSTLists } from '@/lib/rst';
 import { AwardRefSelector } from '@/components/AwardRefSelector';
 import { AdifExtrasEditor } from '@/components/AdifExtrasEditor';
@@ -22,6 +22,7 @@ import { Combobox } from '@/components/ui/combobox';
 import { cn } from '@/lib/utils';
 import { flagURL } from '@/lib/flags';
 import { useI18n } from '@/lib/i18n';
+import { titleCase, sentenceCase } from '@/lib/textCase';
 import type { QSOForm } from '@/types';
 
 type QSO = QSOForm;
@@ -40,9 +41,14 @@ function pfxOf(call: string): string {
 const BANDS = ['2190m','630m','160m','80m','60m','40m','30m','20m','17m','15m','12m','10m','6m','4m','2m','1.25m','70cm','33cm','23cm','13cm','9cm','6cm','3cm','1.25cm','6mm','4mm','2.5mm','2mm','1mm'];
 const MODES = ['SSB','CW','FT8','FT4','RTTY','PSK31','AM','FM','DIGITALVOICE','MFSK','OLIVIA','JS8','JT65','JT9'];
 // label holds an i18n key (resolved with t() at render time).
+// V is in the list because the log HOLDS it: a LoTW download writes "verified"
+// rather than "yes". A dropdown without it renders a verified contact as blank,
+// which reads as "nothing recorded" — and the operator's next click would replace
+// the strongest confirmation they have with whatever they picked instead.
 const QSL_STATUSES = [
   { value: '_', label: 'qedit.qslDash' },
   { value: 'Y', label: 'qedit.qslYes' },
+  { value: 'V', label: 'qedit.qslVerified' },
   { value: 'N', label: 'qedit.qslNo'  },
   { value: 'R', label: 'qedit.qslRequested' },
   { value: 'I', label: 'qedit.qslIgnore' },
@@ -56,10 +62,12 @@ type ConfDef = {
   key: string; label: string;
   sent?: keyof QSOForm; rcvd?: keyof QSOForm;
   sentDate?: keyof QSOForm; rcvdDate?: keyof QSOForm;
-  via?: keyof QSOForm;
+  // How the card travelled, each way (ADIF QSL_SENT_VIA / QSL_RCVD_VIA). Paper
+  // only — the electronic channels below ARE the route.
+  sentVia?: keyof QSOForm; rcvdVia?: keyof QSOForm;
 };
 const CONFIRMATIONS: ConfDef[] = [
-  { key: 'QSL',     label: 'QSL (paper)', sent: 'qsl_sent',  rcvd: 'qsl_rcvd',  sentDate: 'qsl_sent_date',  rcvdDate: 'qsl_rcvd_date',  via: 'qsl_via' },
+  { key: 'QSL',     label: 'QSL (paper)', sent: 'qsl_sent',  rcvd: 'qsl_rcvd',  sentDate: 'qsl_sent_date',  rcvdDate: 'qsl_rcvd_date',  sentVia: 'qsl_sent_via', rcvdVia: 'qsl_rcvd_via' },
   { key: 'LOTW',    label: 'LoTW',        sent: 'lotw_sent', rcvd: 'lotw_rcvd', sentDate: 'lotw_sent_date', rcvdDate: 'lotw_rcvd_date' },
   { key: 'EQSL',    label: 'eQSL',        sent: 'eqsl_sent', rcvd: 'eqsl_rcvd', sentDate: 'eqsl_sent_date', rcvdDate: 'eqsl_rcvd_date' },
   { key: 'QRZCOM',  label: 'QRZ.com',     sent: 'qrzcom_qso_upload_status' as any, sentDate: 'qrzcom_qso_upload_date' as any, rcvd: 'qrzcom_qso_download_status' as any, rcvdDate: 'qrzcom_qso_download_date' as any },
@@ -72,6 +80,24 @@ const CONF_LABEL_KEYS: Record<string, string> = {
   QSL: 'qedit.confQslPaper',
 };
 
+// OpsLog's own card. Kept out of CONFIRMATIONS on purpose — that list maps QSO
+// columns and this channel is backed by ADIF extras — but it still belongs in
+// the channel picker and the status table alongside the rest.
+const OPSLOG_CONF = 'OPSLOG';
+
+// HAMLOG.online. Out of CONFIRMATIONS for the same reason as the OpsLog card —
+// it is stored in the ADIF extras, not in QSO columns — but it is an upload
+// service like QRZ.com or Club Log, so it gets the ordinary sent/received/date
+// editor rather than a special one. The received key is THEIR field name, the
+// one their ADIF export writes; see award.HamlogQSLKey.
+const HAMLOG_CONF = 'HAMLOG';
+const HAMLOG_KEYS = {
+  sent: 'APP_OPSLOG_HAMLOG_SENT',
+  sentDate: 'APP_OPSLOG_HAMLOG_SENT_DATE',
+  rcvd: 'APP_HAMLOG_QSO_CFM',
+  rcvdDate: 'APP_OPSLOG_HAMLOG_QSL_DATE',
+};
+
 // Colour-coded status cell for the confirmation grid.
 function StatusCell({ value }: { value?: string }) {
   const { t } = useI18n();
@@ -91,9 +117,14 @@ function StatusCell({ value }: { value?: string }) {
   //                       every row; painting that orange (as it used to be, in the
   //                       same orange as Requested) made the table shout about a
   //                       non-problem and told you nothing apart.
+  //   Verified  green   — ADIF's V: confirmed AND validated by the awarding body.
+  //                       It is what a LoTW download writes, and this table used
+  //                       to fall through to "No" for it — reporting a verified
+  //                       contact as unconfirmed, in the one place an operator
+  //                       goes to check.
   //   Ignore    dashed  — deliberately excluded, on purpose.
-  const label = v === 'Y' ? t('qedit.qslYes') : v === 'R' ? t('qedit.qslRequested') : v === 'I' ? t('qedit.qslIgnore') : v === 'M' ? t('qedit.statusModified') : t('qedit.qslNo');
+  const label = v === 'Y' ? t('qedit.qslYes') : v === 'V' ? t('qedit.qslVerified') : v === 'R' ? t('qedit.qslRequested') : v === 'I' ? t('qedit.qslIgnore') : v === 'M' ? t('qedit.statusModified') : t('qedit.qslNo');
-  const cls = v === 'Y' ? 'bg-success text-success-foreground border border-success'
+  const cls = v === 'Y' || v === 'V' ? 'bg-success text-success-foreground border border-success'
     : v === 'R' ? 'bg-info-muted text-info-muted-foreground border border-info-border'
     : v === 'M' ? 'bg-warning text-warning-foreground border border-warning'
     : v === 'I' ? 'bg-muted text-muted-foreground border border-dashed border-border italic'
@@ -210,6 +241,28 @@ function QslSelect({ value, onChange }: { value?: string; onChange: (v: string)
   );
 }
 
+// The ADIF QSL Via enumeration. M (manager) is import-only in the standard, so
+// it is not offered here — a file that arrives carrying it keeps it, and this
+// list is what an operator may choose.
+const QSL_VIA_CHOICES = [
+  { value: '_', label: 'qedit.qslDash' },
+  { value: 'B', label: 'qedit.viaBureau' },
+  { value: 'D', label: 'qedit.viaDirect' },
+  { value: 'E', label: 'qedit.viaElectronic' },
+];
+
+function QslViaSelect({ value, onChange }: { value?: string; onChange: (v: string) => void }) {
+  const { t } = useI18n();
+  return (
+    <Select value={value || '_'} onValueChange={(v) => onChange(v === '_' ? '' : v)}>
+      <SelectTrigger><SelectValue /></SelectTrigger>
+      <SelectContent>
+        {QSL_VIA_CHOICES.map((s) => <SelectItem key={s.value} value={s.value}>{t(s.label)}</SelectItem>)}
+      </SelectContent>
+    </Select>
+  );
+}
+
 export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], bands, modes }: Props) {
   const { t } = useI18n();
   // Use the operator's configured band/mode lists (incl. custom ones like 13cm);
@@ -334,7 +387,10 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
       // refreshes it. A cached answer from a thinner QRZ subscription (or any
       // stale row) otherwise stayed for its whole 30-day life and the button
       // appeared to do nothing.
-      const r: any = await LookupCallsignFresh(call);
+      // The QSO's OWN date: a ClubLog exception is resolved as of when the
+      // contact happened, not as of today. Re-looking-up a DXpedition contact
+      // months later must not move it to whatever the prefix means now.
+      const r: any = await LookupCallsignFresh(call, (dateOn || '').slice(0, 10));
       // The lookup WINS over what is in the record — that is the point of asking
       // for it. But an EMPTY result must never blank a good value: `??` only
       // guards against null, and Go marshals an unset string as "", so a QRZ
@@ -428,6 +484,26 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
     [draft.extras],
   );
 
+  // OpsLog QSL "received" marker (ADIF extra). Drives the card's PSE/TNX stamp:
+  // received → TNX QSL (thanks for your card), otherwise PSE QSL (please send one).
+  // Saved with the normal Save via draft.extras.
+  const OPSLOG_QSL_RCVD = 'APP_OPSLOG_QSL_RCVD';
+  const qslReceived = !!String(draft.extras?.[OPSLOG_QSL_RCVD] ?? '').trim();
+  // Sent side, for the confirmations table. Two key names because the marker was
+  // renamed once and old QSOs still carry the first one — same test the Recent
+  // QSOs "OpsLog QSL" column makes.
+  const opslogQslSent = !!(draft.extras?.['APP_OPSLOG_QSL_SENT'] || draft.extras?.['APP_OPSLOG_QSL_CARD_SENT']);
+  const toggleQslReceived = (on: boolean) => {
+    // Reflect immediately in the draft (for the PSE/TNX indicator)…
+    const next = { ...(draft.extras ?? {}) };
+    if (on) next[OPSLOG_QSL_RCVD] = new Date().toISOString();
+    else delete next[OPSLOG_QSL_RCVD];
+    set('extras', next as any);
+    // …and persist right away with a targeted write that reliably sets OR clears
+    // the key (the modal's extras-merge on Save wouldn't clear a removed key).
+    if ((draft as any).id) SetOpsLogQSLReceived((draft as any).id, on).catch(() => {});
+  };
+
   return (
     <Dialog open onOpenChange={(o) => { if (!o) onClose(); }}>
       <DialogContent className="max-w-5xl max-h-[92vh] grid grid-rows-[auto_1fr_auto] gap-0 p-0">
@@ -466,7 +542,22 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
               {/* Top: Callsign + RST + Fetch */}
               <div className="flex items-end gap-2 mb-3">
                 <div className="flex flex-col flex-1 min-w-0">
+                  <div className="flex items-center">
                     <Label>{t('qedit.callsign')}</Label>
+                    {(draft.callsign ?? '').trim() && (
+                      <button
+                        type="button"
+                        title={t('qrz.openTitle', { call: (draft.callsign ?? '').trim().toUpperCase() })}
+                        onClick={() => {
+                          const c = (draft.callsign ?? '').trim().toUpperCase().split('/').map(encodeURIComponent).join('/');
+                          if (c) OpenExternalURL(`https://www.qrz.com/db/${c}`).catch((e: any) => setLocalErr(String(e?.message ?? e)));
+                        }}
+                        className="ml-auto shrink-0 inline-flex items-center gap-0.5 text-[9px] font-semibold normal-case tracking-wider text-primary hover:underline"
+                      >
+                        QRZ ↗
+                      </button>
+                    )}
+                  </div>
                   <Input className="font-mono text-lg font-bold tracking-wider uppercase h-10"
                     value={draft.callsign ?? ''} onChange={(e) => set('callsign', e.target.value)} />
                 </div>
@@ -483,7 +574,8 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
               <div className="grid grid-cols-2 gap-x-6 gap-y-2.5">
                 {/* ── Left column ── */}
                 <div className="flex flex-col gap-2.5">
-                  <div><Label>{t('qedit.name')}</Label><Input value={draft.name ?? ''} onChange={(e) => set('name', e.target.value)} /></div>
+                  <div><Label>{t('qedit.name')}</Label><Input value={draft.name ?? ''} onChange={(e) => set('name', e.target.value)}
+                    onBlur={() => set('name', titleCase(draft.name ?? '') as any)} /></div>
                   <div className="flex items-center gap-2">
                     <Label className="w-20 shrink-0">{t('qedit.band')}</Label>
                     <Select value={draft.band || ''} onValueChange={(v) => set('band', v)}>
@@ -547,10 +639,13 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                   </div>
                   <div className="flex items-end gap-2">
                     <div className="flex flex-col flex-1"><Label>{t('qedit.grid')}</Label><Input value={draft.grid ?? ''} onChange={(e) => set('grid', e.target.value)} className="font-mono uppercase" /></div>
+                    <div className="flex flex-col w-24"><Label>{t('qedit.gridExt')}</Label><Input title={t('qedit.gridExtTip')} value={draft.gridsquare_ext ?? ''} onChange={(e) => set('gridsquare_ext', e.target.value)} className="font-mono uppercase" /></div>
                     <div className="flex flex-col w-24"><Label>PFX</Label><Input readOnly value={pfxOf(draft.callsign ?? '')} className="font-mono bg-muted/40" /></div>
                   </div>
-                  <div><Label>{t('qedit.comment')}</Label><Input value={draft.comment ?? ''} onChange={(e) => set('comment', e.target.value)} /></div>
+                  <div><Label>{t('qedit.comment')}</Label><Input value={draft.comment ?? ''} onChange={(e) => set('comment', e.target.value)}
-                  <div><Label>{t('qedit.note')}</Label><Textarea rows={3} value={draft.notes ?? ''} onChange={(e) => set('notes', e.target.value)} /></div>
+                    onBlur={() => set('comment', sentenceCase(draft.comment ?? '') as any)} /></div>
+                  <div><Label>{t('qedit.note')}</Label><Textarea rows={3} value={draft.notes ?? ''} onChange={(e) => set('notes', e.target.value)}
+                    onBlur={() => set('notes', sentenceCase(draft.notes ?? '') as any)} /></div>
                 </div>
               </div>
             </TabsContent>
@@ -571,7 +666,8 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                       </SelectContent>
                     </Select>
                   </div>
-                  <div><Label>QTH</Label><Input value={draft.qth ?? ''} onChange={(e) => set('qth', e.target.value)} /></div>
+                  <div><Label>QTH</Label><Input value={draft.qth ?? ''} onChange={(e) => set('qth', e.target.value)}
+                    onBlur={() => set('qth', titleCase(draft.qth ?? '') as any)} /></div>
                   <div><Label>{t('qedit.address')}</Label><Textarea rows={4} value={draft.address ?? ''} onChange={(e) => set('address', e.target.value)} /></div>
                 </div>
                 {/* Right column */}
@@ -581,8 +677,19 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                     <div className="flex flex-col flex-1"><Label>Lat</Label><Input type="number" step="0.000001" value={draft.lat ?? ''} onChange={(e) => set('lat', numOrUndef(e.target.value) as any)} className="font-mono" /></div>
                     <div className="flex flex-col flex-1"><Label>Lon</Label><Input type="number" step="0.000001" value={draft.lon ?? ''} onChange={(e) => set('lon', numOrUndef(e.target.value) as any)} className="font-mono" /></div>
                   </div>
-                  <div><Label>{t('qedit.qslMsg')}</Label><Input value={draft.qsl_msg ?? ''} onChange={(e) => set('qsl_msg', e.target.value)} /></div>
+                  {/* The OpsLog QSL marker used to sit here, under QSL Msg. It
-                  <div><Label>{t('qedit.qslVia')}</Label><Input value={draft.qsl_via ?? ''} onChange={(e) => set('qsl_via', e.target.value)} /></div>
+                      belongs with the other confirmation channels — see the QSL
+                      Info tab. */}
+                  <div>
+                    <Label>{t('qedit.qslMsg')}</Label>
+                    <Input value={draft.qsl_msg ?? ''} onChange={(e) => set('qsl_msg', e.target.value)} />
+                  </div>
+                  {/* The manager, and only the manager — ADIF QSL_VIA. How the
+                      card travelled is a separate field, on the QSL Info tab. */}
+                  <div>
+                    <Label>{t('qedit.qslVia')}</Label>
+                    <Input value={draft.qsl_via ?? ''} onChange={(e) => set('qsl_via', e.target.value)} placeholder={t('qedit.qslViaPlaceholder')} />
+                  </div>
                 </div>
               </div>
             </TabsContent>
@@ -621,6 +728,16 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                 const def = CONFIRMATIONS.find((c) => c.key === confSel) ?? CONFIRMATIONS[0];
                 const val = (k?: keyof QSOForm) => (k ? ((draft as any)[k] ?? '') : '');
                 const put = (k: keyof QSOForm | undefined, v: any) => { if (k) (set as any)(k, v); };
+                // The extras-backed channel reads and writes the same way, one
+                // level down. Save merges the extras rather than replacing them,
+                // so an emptied field keeps its stored value — which is why the
+                // statuses are written as explicit Y/N and never removed.
+                const exVal = (k: string) => String(draft.extras?.[k] ?? '');
+                const exPut = (k: string, v: any) => {
+                  const next = { ...(draft.extras ?? {}) };
+                  next[k] = String(v ?? '');
+                  set('extras', next as any);
+                };
                 return (
                   <div className="flex gap-6">
                     {/* Left: edit one confirmation channel at a time */}
@@ -629,9 +746,64 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                         <Label>{t('qedit.manageConf')}</Label>
                         <Select value={confSel} onValueChange={setConfSel}>
                           <SelectTrigger><SelectValue /></SelectTrigger>
-                          <SelectContent>{CONFIRMATIONS.map((c) => <SelectItem key={c.key} value={c.key}>{CONF_LABEL_KEYS[c.key] ? t(CONF_LABEL_KEYS[c.key]) : c.label}</SelectItem>)}</SelectContent>
+                          <SelectContent>
+                            {CONFIRMATIONS.map((c) => <SelectItem key={c.key} value={c.key}>{CONF_LABEL_KEYS[c.key] ? t(CONF_LABEL_KEYS[c.key]) : c.label}</SelectItem>)}
+                            {/* Listed here but NOT in CONFIRMATIONS: that table maps
+                                QSO columns, and this channel lives in the ADIF
+                                extras. It gets its own editor below rather than the
+                                generic sent/received/date grid, which has no field
+                                to bind to. */}
+                            <SelectItem value={OPSLOG_CONF}>{t('qedit.confOpsLog')}</SelectItem>
+                            <SelectItem value={HAMLOG_CONF}>HAMLOG.online</SelectItem>
+                          </SelectContent>
                         </Select>
                       </div>
+
+                      {confSel === HAMLOG_CONF ? (
+                        <>
+                          <div className="grid grid-cols-2 gap-3">
+                            <div><Label>{t('qedit.sent')}</Label><QslSelect value={exVal(HAMLOG_KEYS.sent)} onChange={(v) => exPut(HAMLOG_KEYS.sent, v)} /></div>
+                            <div><Label>{t('qedit.received')}</Label><QslSelect value={exVal(HAMLOG_KEYS.rcvd)} onChange={(v) => exPut(HAMLOG_KEYS.rcvd, v)} /></div>
+                            <div><Label>{t('qedit.dateSent')}</Label><AdifDateInput value={exVal(HAMLOG_KEYS.sentDate)} onChange={(v) => exPut(HAMLOG_KEYS.sentDate, v)} /></div>
+                            <div><Label>{t('qedit.dateReceived')}</Label><AdifDateInput value={exVal(HAMLOG_KEYS.rcvdDate)} onChange={(v) => exPut(HAMLOG_KEYS.rcvdDate, v)} /></div>
+                          </div>
+                          <p className="text-[11px] text-muted-foreground">
+                            {t('qedit.qslPanelHint')} <strong>{t('qedit.saveChanges')}</strong>.
+                          </p>
+                        </>
+                      ) : confSel === OPSLOG_CONF ? (
+                        /* OpsLog's own card. "Sent" is stamped when the card
+                           actually goes out, so it is shown, not offered: ticking
+                           it by hand would record something that never happened.
+                           "Received" drives the PSE/TNX stamp printed on the card,
+                           which is the whole reason the flag exists — hence the
+                           live indicator next to it. It writes immediately rather
+                           than on Save, because clearing an extras key would not
+                           survive the merge Save does. */
+                        <div className="space-y-3">
+                          <div className="grid grid-cols-2 gap-3">
+                            <div>
+                              <Label>{t('qedit.sent')}</Label>
+                              <Input disabled value={opslogQslSent ? t('qedit.qslYes') : t('qedit.qslNo')} />
+                            </div>
+                            <div>
+                              <Label>{t('qedit.received')}</Label>
+                              <label className="flex h-9 items-center gap-2 text-sm cursor-pointer">
+                                <Checkbox checked={qslReceived} onCheckedChange={(c) => toggleQslReceived(!!c)} />
+                                {t('qedit.qslReceived')}
+                              </label>
+                            </div>
+                          </div>
+                          <div className="flex items-center gap-2">
+                            <span className="text-[11px] font-mono px-1.5 py-0.5 rounded bg-muted text-muted-foreground">
+                              {qslReceived ? 'TNX QSL' : 'PSE QSL'}
+                            </span>
+                            <span className="text-[11px] text-muted-foreground">{t('qedit.pseTnxHint')}</span>
+                          </div>
+                          <p className="text-[11px] text-muted-foreground">{t('qedit.opslogSentHint')}</p>
+                        </div>
+                      ) : (
+                        <>
                           <div className="grid grid-cols-2 gap-3">
                             <div><Label>{t('qedit.sent')}</Label><QslSelect value={val(def.sent)} onChange={(v) => put(def.sent, v)} /></div>
                             <div><Label>{t('qedit.received')}</Label>
@@ -641,13 +813,21 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                             </div>
                             <div><Label>{t('qedit.dateSent')}</Label><AdifDateInput value={val(def.sentDate)} onChange={(v) => put(def.sentDate, v)} /></div>
                             <div><Label>{t('qedit.dateReceived')}</Label><AdifDateInput value={val(def.rcvdDate)} onChange={(v) => put(def.rcvdDate, v)} disabled={!def.rcvdDate} /></div>
-                        {def.via && (
+                            {/* How the card travelled, each way — ADIF's QSL Via
-                          <div className="col-span-2"><Label>{t('qedit.via')}</Label><Input value={val(def.via)} onChange={(e) => put(def.via, e.target.value)} placeholder={t('qedit.viaPlaceholder')} /></div>
+                                enumeration. Not the manager: that is a callsign
+                                and lives on the Contact's details tab. */}
+                            {def.sentVia && (
+                              <div><Label>{t('qedit.sentVia')}</Label><QslViaSelect value={val(def.sentVia)} onChange={(v) => put(def.sentVia, v)} /></div>
+                            )}
+                            {def.rcvdVia && (
+                              <div><Label>{t('qedit.rcvdVia')}</Label><QslViaSelect value={val(def.rcvdVia)} onChange={(v) => put(def.rcvdVia, v)} /></div>
                             )}
                           </div>
                           <p className="text-[11px] text-muted-foreground">
                             {t('qedit.qslPanelHint')} <strong>{t('qedit.saveChanges')}</strong>.
                           </p>
+                        </>
+                      )}
                     </div>
 
                     {/* Right: live status grid for every channel.
@@ -672,6 +852,23 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                               <td className="w-24">{c.rcvd ? <StatusCell value={val(c.rcvd)} /> : <span className="block text-center text-[11px] text-muted-foreground">—</span>}</td>
                             </tr>
                           ))}
+                          {/* OpsLog's own card, read from the ADIF extras rather
+                              than a QSO column — hence a hand-written row instead
+                              of a CONFIRMATIONS entry. "Sent" is stamped by OpsLog
+                              when the card actually goes out, so it stays
+                              read-only here: an operator ticking it by hand would
+                              be recording something that never happened. */}
+                          <tr className="text-xs">
+                            <td className="font-medium pr-3 py-0.5 whitespace-nowrap">{t('qedit.confOpsLog')}</td>
+                            <td className="w-24"><StatusCell value={opslogQslSent ? 'Y' : 'N'} /></td>
+                            <td className="w-24"><StatusCell value={qslReceived ? 'Y' : 'N'} /></td>
+                          </tr>
+                          {/* HAMLOG.online — extras again, same hand-written row. */}
+                          <tr className="text-xs">
+                            <td className="font-medium pr-3 py-0.5 whitespace-nowrap">HAMLOG.online</td>
+                            <td className="w-24"><StatusCell value={exVal(HAMLOG_KEYS.sent)} /></td>
+                            <td className="w-24"><StatusCell value={exVal(HAMLOG_KEYS.rcvd)} /></td>
+                          </tr>
                         </tbody>
                       </table>
                     </div>
@@ -713,7 +910,7 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                 <F label={t('qedit.stationCallsign')} span={3}><Input value={draft.station_callsign ?? ''} onChange={(e) => set('station_callsign', e.target.value)} /></F>
                 <F label={t('qedit.operator')} span={3}><Input value={draft.operator ?? ''} onChange={(e) => set('operator', e.target.value)} /></F>
                 <F label={t('qedit.myGrid')}><Input value={draft.my_grid ?? ''} onChange={(e) => set('my_grid', e.target.value)} /></F>
-                <F label={t('qedit.gridExt')}><Input value={draft.my_gridsquare_ext ?? ''} onChange={(e) => set('my_gridsquare_ext', e.target.value)} /></F>
+                <F label={t('qedit.myGridExt')}><Input title={t('qedit.gridExtTip')} value={draft.my_gridsquare_ext ?? ''} onChange={(e) => set('my_gridsquare_ext', e.target.value)} /></F>
                 <F label={t('qedit.country')} span={2}><Combobox value={draft.my_country ?? ''} options={countries} placeholder={t('qedit.country')} onChange={(v) => set('my_country', v)} /></F>
                 <F label={t('qedit.state')}><Input value={draft.my_state ?? ''} onChange={(e) => set('my_state', e.target.value)} /></F>
                 <F label={t('qedit.county')}><Input value={draft.my_cnty ?? ''} onChange={(e) => set('my_cnty', e.target.value)} /></F>
@@ -749,6 +946,10 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
               <div>
                 <p className="text-[11px] font-semibold text-muted-foreground uppercase tracking-wider mb-2">{t('qedit.powerWeather')}</p>
                 <div className="grid grid-cols-6 gap-3">
+                  {/* YOUR power first, then theirs. tx_pwr was saved by this
+                      editor but had no field: a contact logged at the wrong
+                      power could be read back and never corrected. */}
+                  <F label={t('qedit.txPower')}><Input type="number" value={draft.tx_pwr ?? ''} onChange={(e) => set('tx_pwr', numOrUndef(e.target.value) as any)} /></F>
                   <F label={t('qedit.rxPower')}><Input type="number" value={draft.rx_pwr ?? ''} onChange={(e) => set('rx_pwr', numOrUndef(e.target.value) as any)} /></F>
                   <F label={t('qedit.distance')}><Input type="number" value={draft.distance ?? ''} onChange={(e) => set('distance', numOrUndef(e.target.value) as any)} /></F>
                   <F label={t('qedit.aIndex')}><Input type="number" value={draft.a_index ?? ''} onChange={(e) => set('a_index', numOrUndef(e.target.value) as any)} /></F>

frontend/src/components/RecentQSOsGrid.tsx

@@ -18,6 +18,7 @@ import { Checkbox } from '@/components/ui/checkbox';
 import { loadLocal, loadRemote, saveState, seedLocal } from '@/lib/gridPrefs';
 import { useI18n } from '@/lib/i18n';
 import { gridToLatLon, pathBetweenLatLon } from '@/lib/maidenhead';
+import { rowStyleFor, type RowColorSettings } from '@/lib/rowColors';
 
 // Register every Community feature once. v32+ requires explicit registration;
 // AllCommunityModule keeps it simple and pulls in sort/filter/resize/reorder/
@@ -56,16 +57,23 @@ type Props = {
   onRowDoubleClicked?: (q: QSOForm) => void;
   onRowClicked?: (q: QSOForm) => void;
   onRowSelected?: (ids: number[]) => void;
+  // The full first selected row — the Stats (F1) panel shows its entity when the
+  // entry form is empty, so browsing the log answers "what have I got with this
+  // one?" without retyping the call.
+  onRowSelectedQso?: (row: QSOForm | null) => void;
   onUpdateFromCty?: (ids: number[]) => void;
   onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;
   onBulkEdit?: (ids: number[]) => void;
   onExportSelected?: (ids: number[]) => void;
+  onExportSelectedFull?: (ids: number[]) => void;
   onExportSelectedFields?: (ids: number[]) => void;
   onExportFiltered?: () => void;
+  onExportFilteredFull?: () => void;
   onExportCabrilloSelected?: (ids: number[]) => void;
   onExportCabrilloFiltered?: () => void;
   onDelete?: (ids: number[]) => void;
@@ -76,6 +84,8 @@ type Props = {
   // One column per defined award; the cell shows the reference this QSO counts
   // for (from row.award_refs[CODE], attached by the parent). Hidden by default.
   awardCols?: { code: string; name: string }[];
+  // Whole-row colouring by QSL / LoTW status (Settings → Appearance).
+  rowColors?: RowColorSettings | null;
 };
 
 const BASE_COLSTATE_KEY = 'hamlog.qsoColState.v2';
@@ -128,6 +138,10 @@ function qsoDistanceKm(d: any, myGrid?: string): number | undefined {
 
 export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   // ── QSO basics ──
+  // Position in the log, oldest = 1. Filled by the backend over the WHOLE log,
+  // so it does not change when a filter narrows what is shown.
+  { group: 'QSO', label: t('rqg.c.number'), colId: 'number', headerName: t('rqg.h.number'), field: 'number' as any, width: 80, type: 'rightAligned', cellClass: 'font-mono',
+    comparator: (a, b) => (a ?? 0) - (b ?? 0) },
   { group: 'QSO', label: t('rqg.c.qso_date'),  colId: 'qso_date', headerName: t('rqg.c.qso_date'), field: 'qso_date' as any, width: 150, cellClass: 'font-mono', valueFormatter: (p) => fmtDateUTC(p.value), sort: 'desc', defaultVisible: true },
   { group: 'QSO', label: t('rqg.c.qso_date_off'),  colId: 'qso_date_off', headerName: t('rqg.c.qso_date_off'), field: 'qso_date_off' as any, width: 150, cellClass: 'font-mono', valueFormatter: (p) => fmtDateUTC(p.value) },
   { group: 'QSO', label: t('rqg.c.callsign'),  colId: 'callsign', headerName: t('rqg.c.callsign'), field: 'callsign' as any, width: 110, cellClass: 'font-mono font-semibold', defaultVisible: true },
@@ -175,6 +189,8 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'QSL',  label: t('rqg.c.qsl_sent_date'),colId: 'qsl_sent_date', headerName: t('rqg.h.qsl_sent_date'), field: 'qsl_sent_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'QSL',  label: t('rqg.c.qsl_rcvd_date'),colId: 'qsl_rcvd_date', headerName: t('rqg.h.qsl_rcvd_date'), field: 'qsl_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'QSL',  label: t('rqg.c.qsl_via'),      colId: 'qsl_via',       headerName: t('rqg.c.qsl_via'),    field: 'qsl_via' as any,       width: 130 },
+  { group: 'QSL',  label: t('rqg.c.qsl_sent_via'), colId: 'qsl_sent_via',  headerName: t('rqg.h.qsl_sent_via'), field: 'qsl_sent_via' as any, width: 110 },
+  { group: 'QSL',  label: t('rqg.c.qsl_rcvd_via'), colId: 'qsl_rcvd_via',  headerName: t('rqg.h.qsl_rcvd_via'), field: 'qsl_rcvd_via' as any, width: 110 },
   { group: 'QSL',  label: t('rqg.c.qsl_msg'),      colId: 'qsl_msg',       headerName: t('rqg.c.qsl_msg'),    field: 'qsl_msg' as any,       width: 200 },
   { group: 'QSL',  label: t('rqg.c.qslmsg_rcvd'), colId: 'qslmsg_rcvd',   headerName: t('rqg.c.qslmsg_rcvd'), field: 'qslmsg_rcvd' as any, width: 200 },
 
@@ -191,6 +207,16 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'eQSL', label: t('rqg.c.eqsl_rcvd_date'), colId: 'eqsl_rcvd_date', headerName: t('rqg.h.eqsl_rcvd_date'), field: 'eqsl_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   // App-specific: when OpsLog e-mailed its own QSL card. Distinct from eQSL.cc.
   { group: 'QSL', label: t('rqg.c.opslog_qsl_card_sent'), colId: 'opslog_qsl_card_sent', headerName: t('rqg.c.opslog_qsl_card_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return (e['APP_OPSLOG_QSL_SENT'] || e['APP_OPSLOG_QSL_CARD_SENT']) ? 'Y' : 'N'; }, defaultVisible: true },
+  // App-specific: operator marked a QSL as RECEIVED for this QSO (drives PSE/TNX).
+  { group: 'QSL', label: t('rqg.c.opslog_qsl_card_rcvd'), colId: 'opslog_qsl_card_rcvd', headerName: t('rqg.c.opslog_qsl_card_rcvd'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_QSL_RCVD'] ? 'Y' : 'N'; }, defaultVisible: false },
+  // HAMLOG.online. No promoted column — the ADIF standard names a field for
+  // hamlog.EU and none for hamlog.ONLINE — so these read the extras, exactly
+  // like the OpsLog card columns above. Hidden by default: a column per
+  // service, shown to everyone, is how a grid becomes unreadable.
+  { group: 'Uploads', label: t('rqg.c.hamlog_sent'), colId: 'hamlog_sent', headerName: t('rqg.h.hamlog_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_HAMLOG_SENT'] || 'N'; }, defaultVisible: false },
+  { group: 'Uploads', label: t('rqg.c.hamlog_sent_date'), colId: 'hamlog_sent_date', headerName: t('rqg.h.hamlog_sent_date'), width: 110, valueGetter: (p) => fmtDateOnly((p.data as any)?.extras?.['APP_OPSLOG_HAMLOG_SENT_DATE']), defaultVisible: false },
+  { group: 'Uploads', label: t('rqg.c.hamlog_rcvd'), colId: 'hamlog_rcvd', headerName: t('rqg.h.hamlog_rcvd'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_HAMLOG_QSO_CFM'] || e['APP_OPSLOG_HAMLOG_QSL'] || 'N'; }, defaultVisible: false },
+  { group: 'Uploads', label: t('rqg.c.hamlog_rcvd_date'), colId: 'hamlog_rcvd_date', headerName: t('rqg.h.hamlog_rcvd_date'), width: 110, valueGetter: (p) => fmtDateOnly((p.data as any)?.extras?.['APP_OPSLOG_HAMLOG_QSL_DATE']), defaultVisible: false },
   // App-specific: when the QSO's audio recording was e-mailed to the station.
   { group: 'QSL', label: t('rqg.c.opslog_recording_sent'), colId: 'opslog_recording_sent', headerName: t('rqg.h.opslog_recording_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_RECORDING_SENT'] ? 'Y' : 'N'; }, defaultVisible: false },
 
@@ -276,14 +302,24 @@ const GRP_KEYS: Record<string, string> = {
 };
 export const groupLabel = (t: TFn, g: string): string => t(GRP_KEYS[g] ?? g);
 
-// Award columns are governed SOLELY by the awardShown code-set, never by AG
+// Award-column VISIBILITY is governed SOLELY by the awardShown code-set, never
-// Grid's saved column state. Stripping them here (on both save and restore)
+// by AG Grid's saved column state: dropping `hide` here (on both save and
-// stops a stale saved state from re-hiding a shown award column on every
+// restore) stops a stale saved state from re-hiding a shown award column on
-// awardCols rebuild — the desync that made award columns vanish mid-session.
+// every awardCols rebuild — the desync that made award columns vanish
-const stripAwardCols = (st: any[] | null | undefined): any[] =>
+// mid-session.
-  (st ?? []).filter((s) => !String(s?.colId ?? '').startsWith('award_'));
+//
+// Their POSITION, however, has to stay in the state. Filtering the entries out
+// entirely left applyColumnState({applyOrder:true}) with no place for them, and
+// AG Grid appends what the state doesn't mention — so a column the operator
+// dragged to sit AFTER an award column jumped back in front of it on reload.
+const sanitizeAwardCols = (st: any[] | null | undefined): any[] =>
+  (st ?? []).map((s) => {
+    if (!String(s?.colId ?? '').startsWith('award_')) return s;
+    const { hide: _hide, ...rest } = s as any;
+    return rest;
+  });
 
-export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal, rowDragCall, passOrder, onGridApi, storageKey, onRowDoubleClicked, onRowClicked, onRowSelected, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete, onFilteredCountChange, awardCols }: Props) {
+export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal, rowDragCall, passOrder, onGridApi, storageKey, onRowDoubleClicked, onRowClicked, onRowSelected, onRowSelectedQso, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onUpdateCountyFromULS, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFull, onExportSelectedFields, onExportFiltered, onExportFilteredFull, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete, onFilteredCountChange, awardCols, rowColors }: Props) {
   const { t } = useI18n();
   const gridRef = useRef<any>(null);
   const [pickerOpen, setPickerOpen] = useState(false);
@@ -464,12 +500,12 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
   function onGridReady(e: GridReadyEvent) {
     onGridApi?.(e.api);
     const local = loadLocal(colStateKey);
-    if (local) e.api.applyColumnState({ state: sanitizeState(stripAwardCols(local)) as ColumnState[], applyOrder: true });
+    if (local) e.api.applyColumnState({ state: sanitizeState(sanitizeAwardCols(local)) as ColumnState[], applyOrder: true });
     // Fall back to the portable DB copy when the local cache is empty
     // (fresh machine / after a reinstall), then re-seed the cache.
     loadRemote(colStateKey).then((remote) => {
       if (remote && !local) {
-        e.api.applyColumnState({ state: sanitizeState(stripAwardCols(remote)) as ColumnState[], applyOrder: true });
+        e.api.applyColumnState({ state: sanitizeState(sanitizeAwardCols(remote)) as ColumnState[], applyOrder: true });
         seedLocal(colStateKey, remote);
       }
     });
@@ -493,7 +529,7 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
     if (restoringRef.current) return; // ignore the events fired by a column rebuild
     const state = gridRef.current?.api?.getColumnState();
     if (!state) return;
-    saveState(colStateKey, stripAwardCols(state));
+    saveState(colStateKey, sanitizeAwardCols(state));
     // Award columns are stripped above, so persist their widths on the side.
     let changed = false;
     for (const s of state) {
@@ -521,7 +557,7 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
   useEffect(() => {
     const api = gridRef.current?.api;
     const local = loadLocal(colStateKey);
-    if (api && local) api.applyColumnState({ state: sanitizeState(stripAwardCols(local)) as ColumnState[], applyOrder: true });
+    if (api && local) api.applyColumnState({ state: sanitizeState(sanitizeAwardCols(local)) as ColumnState[], applyOrder: true });
     // Re-enable saving once AG Grid has settled the column events from the rebuild.
     const t = window.setTimeout(() => { restoringRef.current = false; }, 0);
     return () => window.clearTimeout(t);
@@ -542,6 +578,7 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
     setSelCount(sel.length);
     setDispCount(api?.getDisplayedRowCount?.() ?? 0);
     onRowSelected?.(sel.map((r) => r.id as number).filter((id) => id != null));
+    onRowSelectedQso?.(sel[0] ?? null);
   }
   // Select every row when the caller bumps selectAllSignal (QSL Manager search).
   useEffect(() => {
@@ -604,6 +641,20 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
     api.setColumnsVisible(ids, false);
     saveColumnState();
   }
+  // Whole-dialog show/hide. showAll/hideAll cover the CATALOGUE only; the award
+  // columns live in their own persisted code set, so a global that skipped them
+  // would leave a row of columns behind and look broken.
+  function setEverything(visible: boolean) {
+    const api = gridRef.current?.api;
+    if (!api) return;
+    api.setColumnsVisible(COL_CATALOG.map((c) => c.colId!), visible);
+    if (awardCols && awardCols.length > 0) {
+      persistAwardShown(visible ? new Set(awardCols.map((a) => a.code.toUpperCase())) : new Set());
+      api.setColumnsVisible(awardCols.map((a) => `award_${a.code}`), visible);
+    }
+    saveColumnState();
+  }
+
   function resetDefaults() {
     const api = gridRef.current?.api;
     if (!api) return;
@@ -679,23 +730,31 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
             animateRows={false}
             suppressCellFocus
             getRowId={(p) => String((p.data as any).id)}
+            getRowStyle={(p) => rowStyleFor(p.data, rowColors ?? null, p.node.rowIndex ?? undefined)}
           />
         </div>
       </div>
 
+      {/* Every handler is passed STRAIGHT through, never wrapped in an arrow: a
+          wrapper is always truthy, so the menu drew "Fix country" and "Update
+          from the callsign databases" even in a grid that wired neither — and
+          clicking them did nothing at all. */}
       <QSOContextMenu
         menu={menu}
         onClose={() => setMenu(null)}
-        onUpdateFromCty={(ids) => onUpdateFromCty?.(ids)}
+        onUpdateFromCty={onUpdateFromCty}
-        onUpdateFromQRZ={(ids) => onUpdateFromQRZ?.(ids)}
+        onUpdateFromQRZ={onUpdateFromQRZ}
         onUpdateFromClublog={onUpdateFromClublog}
+        onUpdateCountyFromULS={onUpdateCountyFromULS}
         onSendTo={onSendTo}
         onSendRecording={onSendRecording}
         onSendEQSL={onSendEQSL}
         onBulkEdit={onBulkEdit}
         onExportSelected={onExportSelected}
+        onExportSelectedFull={onExportSelectedFull}
         onExportSelectedFields={onExportSelectedFields}
         onExportFiltered={onExportFiltered}
+        onExportFilteredFull={onExportFilteredFull}
         onExportCabrilloSelected={onExportCabrilloSelected}
         onExportCabrilloFiltered={onExportCabrilloFiltered}
         onDelete={onDelete}
@@ -709,6 +768,16 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
               {t('rqg.pickerDesc')}
             </DialogDescription>
           </DialogHeader>
+          {/* Whole-dialog controls. The per-group links alone meant hiding
+              everything was one click PER GROUP, and there are a dozen. */}
+          <div className="flex items-center gap-1 px-5 text-[11px] text-muted-foreground">
+            <span>{t('rqg.pickerAllGroups')}</span>
+            <button type="button" className="text-[11px] text-primary hover:underline px-1"
+              onClick={() => setEverything(true)}>{t('rqg.all')}</button>
+            <span className="opacity-40">·</span>
+            <button type="button" className="text-[11px] text-muted-foreground hover:underline px-1"
+              onClick={() => setEverything(false)}>{t('rqg.none')}</button>
+          </div>
           <div className="grid grid-cols-3 gap-4 max-h-[60vh] overflow-y-auto px-5 py-3">
             {GROUP_ORDER.map((group) => {
               const cols = COL_CATALOG.filter((c) => c.group === group);

frontend/src/components/RotorCompass.tsx

@@ -5,12 +5,13 @@
 // when an Ultrabeam is bidirectional, the opposite one when reversed); a small
 // red marker on the bezel shows the short-path bearing to the DX. Click the dial
 // to turn the antenna there.
-import { useMemo } from 'react';
+import { useEffect, useMemo, useRef, useState } from 'react';
 import { geoAzimuthalEquidistant, geoPath, geoGraticule10 } from 'd3-geo';
 import { feature } from 'topojson-client';
 import landTopo from 'world-atlas/land-110m.json';
-import { Compass, X } from 'lucide-react';
+import { Compass, X, Play, Square } from 'lucide-react';
 import { cn } from '@/lib/utils';
+import { useI18n } from '@/lib/i18n';
 
 // Decode the coastline outline once (≈110 m simplified land polygons).
 const LAND = feature(landTopo as any, (landTopo as any).objects.land);
@@ -29,6 +30,11 @@ interface Props {
   onSelectRotor?: (i: number) => void; // switch the active rotor
   onGoto?: (az: number) => void; // click-to-turn
   onClose?: () => void;
+  // Quick-turn buttons and the azimuth box, shown only where the caller wants
+  // them: Station Control draws its own GoTo/Stop around this compass, and two
+  // sets of the same controls side by side would be nothing but confusing.
+  presets?: { label: string; azimuth: number }[];
+  onStop?: () => void;
 }
 
 const SIZE = 168;
@@ -41,7 +47,58 @@ function pt(az: number, radius: number): [number, number] {
   return [C + radius * Math.cos(a), C + radius * Math.sin(a)];
 }
 
-export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLat, centerLon, rotorEnabled, rotors, activeRotor, onSelectRotor, onGoto, onClose }: Props) {
+export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLat, centerLon, rotorEnabled, rotors, activeRotor, onSelectRotor, onGoto, onClose, presets, onStop }: Props) {
+  const { t } = useI18n();
+  // Raw text, not a number: binding the input to a normalised value makes
+  // Backspace fight the operator on the way from "230" to "23". It is parsed
+  // when it is sent, and only then.
+  const [azText, setAzText] = useState('');
+  const showControls = !!(presets || onStop);
+
+  // Which preset was just pressed, so it can light up for a moment.
+  //
+  // A rotor takes seconds to start moving and the needle barely twitches at
+  // first, so without this the only answer to "did that register?" is to press
+  // it again — which is how an antenna ends up ordered somewhere twice. The
+  // acknowledgement has to come from the button itself, at once.
+  const [flashIdx, setFlashIdx] = useState<number | null>(null);
+  const flashTimer = useRef<number | undefined>(undefined);
+  useEffect(() => () => window.clearTimeout(flashTimer.current), []);
+  const pressPreset = (i: number, az: number) => {
+    if (!onGoto) return;
+    setFlashIdx(i);
+    window.clearTimeout(flashTimer.current);
+    flashTimer.current = window.setTimeout(() => setFlashIdx(null), 450);
+    onGoto(az);
+  };
+
+  // Stop needs the same acknowledgement, for the same reason and one more: it
+  // is pressed when something is already wrong, and a button that stays inert
+  // gets hit again and again. Its own flag, so stopping does not blank a preset
+  // that is still lit.
+  const [stopFlash, setStopFlash] = useState(false);
+  const stopTimer = useRef<number | undefined>(undefined);
+  useEffect(() => () => window.clearTimeout(stopTimer.current), []);
+  const pressStop = () => {
+    if (!onStop) return;
+    setStopFlash(true);
+    window.clearTimeout(stopTimer.current);
+    stopTimer.current = window.setTimeout(() => setStopFlash(false), 450);
+    onStop();
+  };
+
+  // 0-359 and nothing else. 360 is refused rather than folded to 0 — it is
+  // almost always a typo for 36 or 306, and a rotor swinging through north on a
+  // slip of the finger is worth one rejected keypress.
+  const sendAz = () => {
+    const s = azText.trim();
+    if (s === '' || !onGoto) return;
+    const n = Number(s);
+    if (!Number.isFinite(n) || !Number.isInteger(n) || n < 0 || n > 359) return;
+    onGoto(n);
+    setAzText('');
+  };
+
   const cardinals = useMemo(
     () => [ { d: 0, l: 'N' }, { d: 45, l: 'NE' }, { d: 90, l: 'E' }, { d: 135, l: 'SE' },
             { d: 180, l: 'S' }, { d: 225, l: 'SW' }, { d: 270, l: 'W' }, { d: 315, l: 'NW' } ],
@@ -72,6 +129,35 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
 
   const headLabel = headings.length ? headings[0] : null;
 
+  // Short and long path to the DX, in figures.
+  //
+  // The bezel already carries the short path as a red marker, but a marker is a
+  // direction, not a number — the same pair sits in the status bar at 10px and
+  // operators reported not being able to read it. It lives here because it
+  // belongs to the compass: every place that draws one gets the readout, instead
+  // of each caller inventing its own. Clickable when the caller can turn, like
+  // the status bar's. Built as a value because it is placed in one of two
+  // columns depending on whether the controls are shown.
+  const pathReadout = (
+    <div className="flex gap-1.5 mt-2 font-mono w-full">
+      {([['SP', bearing ?? null], ['LP', bearing == null ? null : (bearing + 180) % 360]] as const).map(([lbl, az]) => (
+        <button key={lbl} type="button" disabled={az == null || !onGoto}
+          onClick={() => { if (az != null && onGoto) onGoto(Math.round(az)); }}
+          title={az == null ? '' : `${lbl} ${Math.round(az)}°`}
+          className={
+            'flex-1 rounded-md border py-1 text-xs font-semibold tabular-nums transition-colors active:scale-95 ' +
+            (az == null
+              ? 'border-border text-muted-foreground/50 cursor-not-allowed'
+              : onGoto
+                ? 'border-info-border text-info-muted-foreground hover:bg-info-muted cursor-pointer'
+                : 'border-border text-muted-foreground cursor-default')
+          }>
+          {lbl} {az == null ? '—' : `${Math.round(az)}°`}
+        </button>
+      ))}
+    </div>
+  );
+
   return (
     <section className="flex flex-col h-full min-h-0 rounded-lg border border-border bg-card overflow-hidden">
       {/* Header — matches the WinKeyer / Voice keyer panels. */}
@@ -128,7 +214,13 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
         </div>
       )}
 
-      <div className="flex items-center justify-center p-2 min-h-0">
+      {/* Dial on the left, controls on the right. The controls column is sized to
+          fit WITHIN the dial's height: the widget sits in a row whose height is
+          set by the entry strip, so it may grow sideways but never downwards. */}
+      <div className="flex items-start gap-2 p-2 min-h-0">
+      {/* flex-col: the readout goes BELOW the dial. This wrapper was a row, so a
+          sibling of the <svg> landed beside it. */}
+      <div className="flex flex-col items-center justify-center min-h-0 shrink-0">
         <svg
           viewBox={`0 0 ${SIZE} ${SIZE}`}
           className={onGoto ? 'cursor-pointer select-none' : 'select-none'}
@@ -188,6 +280,93 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
           ); })}
           <circle cx={C} cy={C} r={3.5} fill="#15803d" stroke="#fff" strokeWidth={1} />
         </svg>
+
+        {/* With the controls column present the readout goes at the FOOT OF IT
+            instead: the dial sets the widget's height, the controls are shorter
+            than the dial, and that leftover space is exactly the right size for
+            the pair. Under the dial it would push the whole widget taller. */}
+        {!showControls && pathReadout}
+      </div>
+
+      {/* Quick turns + free azimuth + Stop. */}
+      {showControls && (
+        <div className="flex flex-col gap-1.5 flex-1 min-w-0">
+          {/* Two columns so six regions fit beside the dial rather than under
+              it. An operator with fewer keeps the same compact block. */}
+          {!!presets?.length && (
+            <div className="grid grid-cols-2 gap-1">
+              {presets.map((p, i) => (
+                <button
+                  key={`${p.label}-${i}`}
+                  type="button"
+                  disabled={!onGoto}
+                  onClick={() => pressPreset(i, p.azimuth)}
+                  title={`${p.label} — ${p.azimuth}°`}
+                  className={cn(
+                    'rounded-md border py-1 text-xs font-semibold truncate transition-all duration-150 active:scale-95',
+                    flashIdx === i
+                      // Lit, and showing the azimuth it just sent: the label alone
+                      // would only say the press landed, not what was ordered.
+                      ? 'border-success bg-success text-success-foreground scale-95'
+                      : 'border-border bg-muted/40',
+                    onGoto && flashIdx !== i ? 'hover:bg-muted' : '',
+                    !onGoto ? 'opacity-50 cursor-not-allowed' : '',
+                  )}
+                >
+                  {flashIdx === i ? `${p.azimuth}°` : p.label}
+                </button>
+              ))}
+            </div>
+          )}
+
+          {/* Free azimuth: Enter sends, so the whole thing is type-three-digits
+              -and-go without reaching for the mouse. */}
+          <div className="flex gap-1">
+            <input
+              type="text"
+              inputMode="numeric"
+              value={azText}
+              onChange={(e) => setAzText(e.target.value.replace(/[^0-9]/g, '').slice(0, 3))}
+              onKeyDown={(e) => { if (e.key === 'Enter') { e.preventDefault(); sendAz(); } }}
+              placeholder={t('rotor.azPh')}
+              title={t('rotor.azTitle')}
+              disabled={!onGoto}
+              className="min-w-0 flex-1 rounded-md border border-border bg-background px-2 py-1 text-xs font-mono tabular-nums text-center disabled:opacity-50"
+            />
+            <button
+              type="button"
+              onClick={sendAz}
+              disabled={!onGoto || azText.trim() === ''}
+              title={t('rotor.go')}
+              className="flex items-center gap-1 rounded-md border border-success/60 bg-success-muted px-2 py-1 text-xs font-bold text-success-muted-foreground transition-transform hover:bg-success/25 active:scale-95 disabled:opacity-40 disabled:cursor-not-allowed"
+            >
+              <Play className="size-3" /> {t('rotor.go')}
+            </button>
+          </div>
+
+          {onStop && (
+            <button
+              type="button"
+              onClick={pressStop}
+              title={t('rotor.stop')}
+              className={cn(
+                'flex items-center justify-center gap-1.5 rounded-md border py-1 text-xs font-bold transition-all duration-150 active:scale-95',
+                stopFlash
+                  // Solid, not a tint: STOP reads the same in both languages, so
+                  // the fill is the whole acknowledgement.
+                  ? 'border-destructive bg-destructive text-destructive-foreground scale-95'
+                  : 'border-destructive/60 bg-destructive/15 text-destructive hover:bg-destructive/25',
+              )}
+            >
+              <Square className="size-3 fill-current" /> {t('rotor.stop')}
+            </button>
+          )}
+
+          {/* mt-auto: the readout sits at the FOOT of the column, level with the
+              bottom of the dial, instead of floating under the Stop button. */}
+          <div className="mt-auto">{pathReadout}</div>
+        </div>
+      )}
       </div>
     </section>
   );

frontend/src/components/SendSpotModal.tsx

@@ -13,6 +13,32 @@ export interface RecentSpotQSO {
   freqKHz: number;
   mode: string;
   band?: string;
+  // Award references logged for this QSO, each one complete and ready to read
+  // on a cluster line ("POTA FR-11553"). Empty for an ordinary contact.
+  refs?: string[];
+}
+
+// SPOT_COMMENT_MAX is the DX cluster comment field: 30 characters, and nodes
+// truncate what does not fit without saying so. Only the comment BUILT here is
+// held to it — whatever the operator types is their own business.
+const SPOT_COMMENT_MAX = 30;
+
+// spotComment puts the award references after the mode, the order a cluster
+// line is read in: "CW POTA FR-11553".
+//
+// A reference goes in whole or not at all. Truncation would leave "CW POTA" or
+// half a park number on the air, which is worse than saying nothing: a spot
+// nobody can act on still costs everyone who reads it.
+export function spotComment(mode: string, refs?: string[]): string {
+  let out = (mode || '').trim();
+  for (const ref of refs ?? []) {
+    const one = ref.trim();
+    if (!one) continue;
+    const next = out ? `${out} ${one}` : one;
+    if (next.length > SPOT_COMMENT_MAX) continue; // a shorter one may still fit
+    out = next;
+  }
+  return out;
 }
 
 interface Props {
@@ -23,6 +49,9 @@ interface Props {
   defaultCall: string;
   defaultFreqKHz: number;
   defaultMode: string;
+  // Award references on the QSO being entered (or on the last logged one),
+  // appended to the comment after the mode.
+  defaultRefs?: string[];
   // Master cluster name, shown so the user knows where the spot goes.
   targetName?: string;
   recent: RecentSpotQSO[];
@@ -33,7 +62,7 @@ interface Props {
 // the master cluster: callsign + frequency (kHz) + a free message (defaults
 // to the mode). A "Latest QSOs" list lets the operator one-click a recent
 // contact into the form.
-export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defaultMode, targetName, recent, onSend }: Props) {
+export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defaultMode, defaultRefs, targetName, recent, onSend }: Props) {
   const { t } = useI18n();
   const [call, setCall] = useState('');
   const [freqKHz, setFreqKHz] = useState('');
@@ -48,12 +77,12 @@ export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defa
     if (!open) return;
     setCall((defaultCall || '').toUpperCase());
     setFreqKHz(defaultFreqKHz > 0 ? trimKHz(defaultFreqKHz) : '');
-    setMessage(defaultMode || '');
+    setMessage(spotComment(defaultMode, defaultRefs));
     setError('');
     setOk(false);
     // Focus the freq if the call is already known, else the call.
     setTimeout(() => callRef.current?.focus(), 50);
-  }, [open, defaultCall, defaultFreqKHz, defaultMode]);
+  }, [open, defaultCall, defaultFreqKHz, defaultMode, defaultRefs]);
 
   async function send() {
     const c = call.trim().toUpperCase();
@@ -77,7 +106,7 @@ export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defa
   function pick(q: RecentSpotQSO) {
     setCall(q.callsign.toUpperCase());
     if (q.freqKHz > 0) setFreqKHz(trimKHz(q.freqKHz));
-    if (q.mode) setMessage(q.mode);
+    setMessage(spotComment(q.mode, q.refs));
     setError('');
   }
 

frontend/src/components/StationControlPanel.tsx

@@ -1,28 +1,91 @@
 import { useCallback, useEffect, useLayoutEffect, useRef, useState } from 'react';
-import { Plus, Pencil, Trash2, Power, PlugZap, Loader2, Check, X, Compass, Square, Antenna as AntennaIcon, ArrowDownToLine, Minus, RefreshCw, GripVertical } from 'lucide-react';
+import { Plus, Pencil, Trash2, Power, PlugZap, Loader2, Check, X, Compass, Square, Antenna as AntennaIcon, ArrowDownToLine, Minus, RefreshCw, GripVertical, ChevronUp, ChevronDown } from 'lucide-react';
 import { Button } from '@/components/ui/button';
 import { Input } from '@/components/ui/input';
 import { Label } from '@/components/ui/label';
+import { Checkbox } from '@/components/ui/checkbox';
 import { Select, SelectContent, SelectItem, SelectTrigger, SelectValue } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
+import { MotorAntennaWidget, type AntStatus } from '@/components/MotorAntennaWidget';
 import { useI18n } from '@/lib/i18n';
 import { writeUiPref } from '@/lib/uiPref';
+import { subscribeRotorHeading, pokeRotorHeading } from '@/lib/rotorHeading';
 import { RotorCompass } from '@/components/RotorCompass';
 import { AmpCard } from '@/components/AmpCard';
 import { TunerCard } from '@/components/TunerCard';
 import type { TGStatus } from '@/components/TunerGeniusPanel';
 import {
   GetStationDevices, SaveStationDevices, GetStationStatus, StationSetRelay,
-  GetRotatorHeading, RotatorGoTo, RotatorStop, SetActiveRotor,
+  RotatorGoTo, RotatorStop, SetActiveRotor,
   GetUltrabeamStatus, SetUltrabeamDirection, UltrabeamRetract, MotorSetElement, MotorReadElements,
+  MotorTuneKHz, MotorNudgeKHz, SetMotorFollow,
   ListDenkoviDevices, ListSerialPorts, TestStationDevice,
   GetAmpStatuses, GetFlexState,
   GetTunerGeniusStatus, GetTunerGeniusSettings,
+  GetPSUStatus, GetPSUSettings, SetPSUOutput,
 } from '../../wailsjs/go/main/App';
 
 type RotatorProps = { centerLat?: number | null; centerLon?: number | null; bearing?: number | null };
 
-type Device = { id: string; type: string; name: string; host: string; user?: string; pass?: string; channels?: number; labels: string[] };
+type PSUState = { connected: boolean; on: boolean; volts: number; amps: number; watts: number; set_volts: number; set_amps: number; protected: number; error?: string };
+
+// The bench supply. One button — the output — and the three numbers that say
+// what it is actually delivering.
+//
+// The SET points are shown beside them, small, because "13.8 V set" next to
+// "0.02 A out" is how an operator sees at a glance that the supply is on but
+// the radio is not drawing. They are not editable: OpsLog reads them and never
+// writes them, which is the whole safety story of this device.
+function PSUCard({ st, busy, onToggle, t }: {
+  st: PSUState; busy: boolean; onToggle: (on: boolean) => void; t: (k: string, v?: any) => string;
+}) {
+  const tripped = (st.protected ?? 0) !== 0;
+  return (
+    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full">
+      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
+        <Power className="size-4 text-primary" />
+        <div className="text-sm font-semibold truncate">{t('psu.title')}</div>
+        <span className={cn('ml-auto size-2 rounded-full shrink-0', st.connected ? 'bg-success' : 'bg-muted-foreground/40')}
+          title={st.connected ? t('station.online') : (st.error || t('psu.offline'))} />
+      </div>
+      <div className="p-3 space-y-2">
+        <div className="flex items-center gap-3">
+          <button type="button" disabled={!st.connected || busy}
+            onClick={() => onToggle(!st.on)}
+            className={cn('flex items-center gap-2 rounded-md border px-3 py-1.5 transition-colors disabled:opacity-40',
+              st.on ? 'bg-success/15 border-success/50' : 'bg-muted/30 border-border hover:bg-muted')}>
+            <span className={cn('flex items-center justify-center size-6 rounded shrink-0',
+              st.on ? 'bg-success text-success-foreground' : 'bg-muted-foreground/15 text-muted-foreground')}>
+              {busy ? <Loader2 className="size-3.5 animate-spin" /> : <Power className="size-3.5" />}
+            </span>
+            <span className="text-xs font-semibold">{t('psu.output')}</span>
+            <span className={cn('text-[10px] font-bold', st.on ? 'text-success' : 'text-muted-foreground/60')}>
+              {st.on ? t('station.on') : t('station.off')}
+            </span>
+          </button>
+          <div className="flex-1 min-w-0 font-mono tabular-nums text-right">
+            <span className="text-lg font-bold">{(st.volts ?? 0).toFixed(2)}</span><span className="text-xs text-muted-foreground"> V</span>
+            <span className="text-lg font-bold ml-3">{(st.amps ?? 0).toFixed(3)}</span><span className="text-xs text-muted-foreground"> A</span>
+          </div>
+        </div>
+        <div className="flex items-center justify-between text-[11px] text-muted-foreground font-mono">
+          <span>{(st.watts ?? 0).toFixed(1)} W</span>
+          <span>{t('psu.setTo')} {(st.set_volts ?? 0).toFixed(2)} V / {(st.set_amps ?? 0).toFixed(3)} A</span>
+        </div>
+        {tripped && (
+          <div className="text-[11px] font-bold text-danger">{t('psu.tripped')} (0x{(st.protected ?? 0).toString(16).toUpperCase()})</div>
+        )}
+      </div>
+    </div>
+  );
+}
+
+type Device = {
+  id: string; type: string; name: string; host: string;
+  user?: string; pass?: string; channels?: number; labels: string[];
+  // Generic HTTP board only. The per-relay URLs win over the patterns.
+  on_urls?: string[]; off_urls?: string[]; on_pattern?: string; off_pattern?: string; insecure_tls?: boolean;
+};
 type Relay = { number: number; label: string; on: boolean };
 type DevStatus = { id: string; name: string; type: string; connected: boolean; error?: string; relays: Relay[] };
 
@@ -33,14 +96,20 @@ type DevStatus = { id: string; name: string; type: string; connected: boolean; e
 const CARD_MIN = 430; // narrowest a card may get before "Auto" drops a column
 const GRID_GAP = 16; // px between cards, both axes
 
-const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8, dingtian: 2 };
+const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8, dingtian: 2, httpgen: 4 };
-const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)', dingtian: 'Dingtian IOT relay' };
+const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)', dingtian: 'Dingtian IOT relay', httpgen: 'HTTP relay' };
 
 // Relay count for a configured device: fixed by type, except Denkovi (4/8) and
 // the generic USB-serial board, whose channel count the user picks.
+// chanCount is the relay count for a device. It MUST agree with
+// deviceRelayCount in app.go: the two decide how many labels and URL rows the
+// editor shows and how many relays the driver is built for, and a type known to
+// one and not the other silently pins the count to its fixed default — which is
+// exactly what happened when the HTTP board was added here and not below.
 const chanCount = (d: Device): number =>
   (d.type === 'denkovi' || d.type === 'usbrelay') ? (d.channels && d.channels >= 1 ? d.channels : 8)
     : d.type === 'dingtian' ? (d.channels && d.channels >= 1 ? d.channels : 2)
+      : d.type === 'httpgen' ? (d.channels && d.channels >= 1 ? d.channels : 4)
         : (RELAY_COUNT[d.type] ?? 5);
 
 function blankDevice(): Device {
@@ -76,6 +145,8 @@ function RotatorWidget({ hd, refetch, centerLat, centerLon, bearing, t }: Rotato
           title={hd.ok ? t('station.online') : t('station.rotatorNoRead')} />
       </div>
       <div className="p-3 flex gap-4 items-start">
+        {/* The SP/LP readout lives INSIDE RotorCompass, so every compass in the
+            app carries it rather than each caller drawing its own. */}
         <RotorCompass
           bearing={bearing ?? null}
           headings={hd.ok ? [hd.azimuth] : []}
@@ -115,155 +186,6 @@ function RotatorWidget({ hd, refetch, centerLat, centerLon, bearing, t }: Rotato
   );
 }
 
-type AntStatus = { enabled: boolean; type: string; connected: boolean; direction: number; frequency: number; moving: boolean; elements: number[] };
-
-// MotorAntennaWidget controls a motorized antenna (Ultrabeam / SteppIR) from the
-// Station Control tab: pattern (Normal / 180° / Bi), Retract, and — Ultrabeam
-// only — per-element length adjustment. Heading/state is polled by the panel.
-const ELEMENT_STEP = 2; // the physical console adjusts 2 mm per press
-
-// elementName maps an element index to a ham-radio name: 0 = reflector,
-// 1 = driven element, then Director 1, 2, 3…
-function elementName(i: number, t: (k: string, v?: any) => string): string {
-  if (i === 0) return t('station.reflector');
-  if (i === 1) return t('station.driven');
-  return `${t('station.director')} ${i - 1}`;
-}
-
-function MotorAntennaWidget({ ant, refetch, t }: { ant: AntStatus; refetch: () => void; t: (k: string, v?: any) => string }) {
-  const [err, setErr] = useState('');
-  const [lengths, setLengths] = useState<number[]>([]); // current element lengths (mm), from ReadElements
-  const [reading, setReading] = useState(false);
-  const [busyEl, setBusyEl] = useState<number | null>(null);
-  const [editingEl, setEditingEl] = useState<number | null>(null); // element whose mm is being typed
-  const [editVal, setEditVal] = useState('');
-  const run = (p: Promise<any>) => p.then(refetch).catch((e) => setErr(String(e?.message ?? e)));
-  const isUB = ant.type !== 'steppir';
-
-  const readLengths = useCallback(async () => {
-    setReading(true); setErr('');
-    try { setLengths(((await MotorReadElements()) ?? []) as number[]); }
-    catch (e: any) { setErr(String(e?.message ?? e)); }
-    finally { setReading(false); }
-  }, []);
-  // Read the current lengths once when the Ultrabeam widget mounts/connects, so
-  // +/- starts from the real values rather than blind.
-  useEffect(() => { if (isUB && ant.connected) readLengths(); }, [isUB, ant.connected, readLengths]);
-
-  // Send an absolute length to one element and remember it as the new baseline.
-  const setLen = async (i: number, mm: number) => {
-    const next = Math.max(0, Math.round(mm));
-    const prev = lengths[i] ?? 0;
-    setBusyEl(i); setErr('');
-    setLengths((ls) => { const c = [...ls]; c[i] = next; return c; }); // optimistic
-    try { await MotorSetElement(i, next); refetch(); }
-    catch (e: any) {
-      // Rejected by the controller — most often the element is at its travel
-      // limit for this band (extending on a low band). Revert the optimistic
-      // value so the display stays truthful, and explain the likely cause when
-      // the failed move was an extension.
-      setLengths((ls) => { const c = [...ls]; c[i] = prev; return c; });
-      setErr(next > prev ? t('station.atMax') : String(e?.message ?? e));
-    }
-    finally { setBusyEl(null); }
-  };
-  // Nudge one element by ±2 mm from its current known length.
-  const nudge = (i: number, delta: number) => setLen(i, (lengths[i] ?? 0) + delta);
-  // Commit a typed exact length (click on the mm value). Lets the operator fix
-  // the baseline when the auto-read is off, so +/- then work reliably.
-  const commitEdit = (i: number) => {
-    const v = parseInt(editVal, 10);
-    setEditingEl(null);
-    if (!isNaN(v) && v >= 0 && v !== lengths[i]) setLen(i, v);
-  };
-  const dirs: [number, string][] = [[0, 'N'], [1, '180°'], [2, t('station.bi')]];
-  return (
-    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full">
-      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
-        <AntennaIcon className="size-4 text-primary" />
-        <div className="min-w-0">
-          <div className="text-sm font-semibold truncate">{isUB ? 'Ultrabeam' : 'SteppIR'}</div>
-          {ant.frequency > 0 && <div className="text-[10px] text-muted-foreground font-mono">{(ant.frequency / 1000).toFixed(3)} MHz</div>}
-        </div>
-        {ant.moving && <span className="ml-auto text-[10px] font-semibold text-warning animate-pulse">{t('station.moving')}</span>}
-        <span className={cn('size-2 rounded-full shrink-0', ant.moving ? '' : 'ml-auto', ant.connected ? 'bg-success' : 'bg-muted-foreground/40')}
-          title={ant.connected ? t('station.online') : t('station.offline')} />
-      </div>
-      <div className="p-3 space-y-3">
-        <div>
-          <div className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground mb-1">{t('station.pattern')}</div>
-          <div className="flex gap-1">
-            {dirs.map(([d, lbl]) => (
-              <button key={d} type="button" disabled={!ant.connected}
-                onClick={() => run(SetUltrabeamDirection(d))}
-                className={cn('flex-1 rounded-md border py-1.5 text-xs font-semibold transition-colors disabled:opacity-40',
-                  ant.direction === d ? 'bg-primary text-primary-foreground border-primary' : 'border-border hover:bg-muted')}>
-                {lbl}
-              </button>
-            ))}
-          </div>
-        </div>
-        <button type="button" disabled={!ant.connected}
-          onClick={() => run(UltrabeamRetract())}
-          className="w-full flex items-center justify-center gap-1.5 rounded-md border border-warning-border bg-warning-muted text-warning-muted-foreground py-1.5 text-xs font-semibold hover:brightness-95 disabled:opacity-40">
-          <ArrowDownToLine className="size-3.5" /> {t('station.retract')}
-        </button>
-
-        {isUB && (
-          <div>
-            <div className="flex items-center gap-2 mb-1.5">
-              <span className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground">{t('station.elements')}</span>
-              <button type="button" onClick={readLengths} disabled={!ant.connected || reading}
-                className="text-[10px] text-primary hover:underline inline-flex items-center gap-1 disabled:opacity-40" title={t('station.readLengths')}>
-                <RefreshCw className={cn('size-3', reading && 'animate-spin')} /> {t('station.read')}
-              </button>
-            </div>
-            {lengths.length === 0 ? (
-              <p className="text-[11px] text-muted-foreground">{t('station.noLengths')}</p>
-            ) : (
-              <div className="space-y-1.5">
-                {/* The READ_BANDS reply is undocumented and its 16-bit parse picks
-                    up structural bytes past the real data (varying by band), which
-                    made 6+ bogus "elements" appear. Ultrabeam beams are 3-element,
-                    and ModifyElement addresses elements 0..2 — so show just those. */}
-                {lengths.map((mm, i) => ({ mm, i })).slice(0, 3).map(({ mm, i }) => (
-                  <div key={i} className="flex items-center gap-2">
-                    <span className="text-xs w-20 shrink-0 text-muted-foreground truncate">{elementName(i, t)}</span>
-                    <button type="button" disabled={!ant.connected || busyEl !== null}
-                      onClick={() => nudge(i, -ELEMENT_STEP)}
-                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
-                      <Minus className="size-3.5" />
-                    </button>
-                    {editingEl === i ? (
-                      <input autoFocus type="number" value={editVal}
-                        onChange={(e) => setEditVal(e.target.value)}
-                        onBlur={() => commitEdit(i)}
-                        onKeyDown={(e) => { if (e.key === 'Enter') commitEdit(i); if (e.key === 'Escape') setEditingEl(null); }}
-                        className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums bg-transparent border border-primary rounded px-1" />
-                    ) : (
-                      <span className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums cursor-pointer hover:underline"
-                        title={t('station.setExactLen')}
-                        onClick={() => { setEditingEl(i); setEditVal(String(mm)); }}>
-                        {busyEl === i ? <Loader2 className="size-3.5 animate-spin inline" /> : `${mm} mm`}
-                      </span>
-                    )}
-                    <button type="button" disabled={!ant.connected || busyEl !== null}
-                      onClick={() => nudge(i, ELEMENT_STEP)}
-                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
-                      <Plus className="size-3.5" />
-                    </button>
-                  </div>
-                ))}
-              </div>
-            )}
-            <p className="text-[10px] text-muted-foreground mt-1">{t('station.elementsHint')}</p>
-          </div>
-        )}
-        {err && <div className="text-[11px] text-destructive break-words">{err}</div>}
-      </div>
-    </div>
-  );
-}
 
 export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorProps) {
   const { t } = useI18n();
@@ -331,6 +253,32 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
     return () => { alive = false; window.clearInterval(id); };
   }, []);
 
+  // Bench power supply. Polled slower than the tuner: it has no meters that
+  // track a transmission, and every poll is three Modbus exchanges on a 9600
+  // baud line the operator may also be using to switch the output.
+  const [psu, setPsu] = useState<PSUState>({ connected: false, on: false, volts: 0, amps: 0, watts: 0, set_volts: 0, set_amps: 0, protected: 0 });
+  const [psuEnabled, setPsuEnabled] = useState(false);
+  const [psuBusy, setPsuBusy] = useState(false);
+  useEffect(() => {
+    let alive = true;
+    const load = async () => {
+      try { const en: any = await GetPSUSettings(); if (alive) setPsuEnabled(!!en?.enabled); } catch {}
+      try { const st: any = await GetPSUStatus(); if (alive && st) setPsu(st as PSUState); } catch {}
+    };
+    load();
+    const id = window.setInterval(load, 1500);
+    return () => { alive = false; window.clearInterval(id); };
+  }, []);
+  const togglePSU = useCallback(async (on: boolean) => {
+    setPsuBusy(true);
+    // No optimistic flip here, unlike the relays: the supply echoes the value it
+    // actually set, so showing ON before it confirms would be showing something
+    // OpsLog does not know. A power switch is the wrong place to guess.
+    try { await SetPSUOutput(on); const st: any = await GetPSUStatus(); if (st) setPsu(st as PSUState); }
+    catch { /* the poll will tell the truth */ }
+    finally { setPsuBusy(false); }
+  }, []);
+
   const loadDevices = useCallback(async () => {
     try { setDevices(((await GetStationDevices()) ?? []) as Device[]); } catch { /* db not ready */ }
   }, []);
@@ -341,19 +289,21 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
       setStatus(Object.fromEntries(s.map((d) => [d.id, d])));
     } catch { /* ignore transient */ }
   }, []);
-  const pollRot = useCallback(async () => {
-    try { setRot((await GetRotatorHeading()) as any); } catch { /* ignore */ }
-  }, []);
   const pollAnt = useCallback(async () => {
     try { setAnt((await GetUltrabeamStatus()) as any); } catch { /* ignore */ }
   }, []);
 
   useEffect(() => { loadDevices(); }, [loadDevices]);
+  // The heading comes from the shared poller: one loop for the whole app, fast
+  // while the antenna turns and slow while it is parked. Every poll opens and
+  // closes the controller's port, and this panel used to run its own alongside
+  // the status bar's — the same controller asked twice over.
+  useEffect(() => subscribeRotorHeading((h) => setRot(h as any)), []);
   useEffect(() => {
-    poll(); pollRot(); pollAnt();
+    poll(); pollAnt();
-    const id = window.setInterval(() => { poll(); pollRot(); pollAnt(); }, 3000);
+    const id = window.setInterval(() => { poll(); pollAnt(); }, 3000);
     return () => window.clearInterval(id);
-  }, [poll, pollRot, pollAnt, devices.length]);
+  }, [poll, pollAnt, devices.length]);
 
   const persistOrder = (next: string[]) => { setOrder(next); writeUiPref('opslog.stationOrder', JSON.stringify(next)); };
   // Reorder so `dragged` lands just before `target`.
@@ -401,16 +351,25 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   const deviceCard = (dev: Device) => {
     const st = status[dev.id];
     const relays = st?.relays ?? dev.labels.map((label, i) => ({ number: i + 1, label, on: false }));
+    // The generic HTTP board has no address of its own and nothing to poll: its
+    // relays can each live on a different box, and no status endpoint is read
+    // back. So no host under the name, no online dot, and the buttons are never
+    // greyed out waiting for a connection that is never made.
+    const fireAndForget = dev.type === 'httpgen';
     return (
       <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full">
         <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
           <PlugZap className="size-4 text-primary" />
           <div className="min-w-0">
             <div className="text-sm font-semibold truncate">{dev.name || TYPE_LABEL[dev.type]}</div>
-            <div className="text-[10px] text-muted-foreground font-mono truncate">{TYPE_LABEL[dev.type]} · {dev.host}</div>
+            <div className="text-[10px] text-muted-foreground font-mono truncate">
+              {TYPE_LABEL[dev.type]}{fireAndForget || !dev.host ? '' : ` · ${dev.host}`}
             </div>
+          </div>
+          {fireAndForget ? <span className="ml-auto" /> : (
             <span className={cn('ml-auto size-2 rounded-full shrink-0', st?.connected ? 'bg-success' : 'bg-muted-foreground/40')}
               title={st?.connected ? t('station.online') : (st?.error || t('station.offline'))} />
+          )}
           <button className="text-muted-foreground hover:text-foreground" title={t('station.edit')}
             onClick={() => setEditing({ ...dev, labels: [...dev.labels] })}><Pencil className="size-3.5" /></button>
           <button className="text-muted-foreground hover:text-destructive" title={t('station.delete')}
@@ -423,7 +382,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
             const key = `${dev.id}:${r.number}`;
             const label = r.label || `${t('station.relay')} ${r.number}`;
             return (
-              <button key={r.number} type="button" disabled={!st?.connected}
+              <button key={r.number} type="button" disabled={!fireAndForget && !st?.connected}
                 title={label}
                 onClick={() => toggle(dev, r.number, !r.on)}
                 className={cn('w-[150px] flex items-center gap-1.5 rounded-md border px-2 py-1 text-left transition-colors disabled:opacity-40',
@@ -450,7 +409,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   // full-width, and they need that room here too.
   const widgets: { id: string; node: React.ReactNode; wide?: boolean }[] = [];
   if (rot.enabled) {
-    widgets.push({ id: 'rotator', node: <RotatorWidget hd={rot} refetch={pollRot} centerLat={centerLat} centerLon={centerLon} bearing={bearing} t={t} /> });
+    widgets.push({ id: 'rotator', node: <RotatorWidget hd={rot} refetch={pokeRotorHeading} centerLat={centerLat} centerLon={centerLon} bearing={bearing} t={t} /> });
   }
   if (ant.enabled) {
     widgets.push({ id: 'antenna', node: <MotorAntennaWidget ant={ant} refetch={pollAnt} t={t} /> });
@@ -459,6 +418,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   for (const amp of amps) widgets.push({ id: `amp:${amp.id}`, node: <AmpCard amp={amp} flex={flexState} t={t} />, wide: true });
   // Tuner Genius XL card (identical to the Flex panel's).
   if (tgEnabled) widgets.push({ id: 'tuner', node: <TunerCard status={tg} t={t} />, wide: true });
+  if (psuEnabled) widgets.push({ id: 'psu', node: <PSUCard st={psu} busy={psuBusy} onToggle={togglePSU} t={t} /> });
   for (const dev of devices) widgets.push({ id: dev.id, node: deviceCard(dev) });
 
   const rank = (id: string) => { const i = order.indexOf(id); return i < 0 ? 1e6 : i; };
@@ -560,6 +520,20 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
   const isDingtian = device.type === 'dingtian';
   const isDenkovi = device.type === 'denkovi';
   const isUsbRelay = device.type === 'usbrelay';
+  const isHTTPGen = device.type === 'httpgen';
+  // {value} sends a relay's label, so a URL using it on an unnamed relay would
+  // go out with an empty parameter. Warn while it is being typed rather than at
+  // the moment an antenna fails to switch.
+  const valueNeedsLabels = isHTTPGen
+    && [...(device.on_urls ?? []), ...(device.off_urls ?? []), device.on_pattern ?? '', device.off_pattern ?? '']
+      .some((s) => (s ?? '').includes('{value}'))
+    && device.labels.some((l) => !l.trim());
+  // Any https:// among this board's URLs. A relay box on the LAN signs its own
+  // certificate, so HTTPS to one cannot be verified — the operator has to say
+  // whether to accept that, and the question only arises once they type https.
+  const usesHTTPS = isHTTPGen
+    && [...(device.on_urls ?? []), ...(device.off_urls ?? []), device.on_pattern ?? '', device.off_pattern ?? '']
+      .some((u) => (u ?? '').trim().toLowerCase().startsWith('https://'));
   // COM ports for the generic USB-serial relay picker.
   const [serialPorts, setSerialPorts] = useState<string[]>([]);
   useEffect(() => {
@@ -611,6 +585,7 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
               <SelectItem value="dingtian">Dingtian IOT relay (LAN / WiFi)</SelectItem>
               <SelectItem value="denkovi">Denkovi USB (FT245 / D2XX)</SelectItem>
               <SelectItem value="usbrelay">Denkovi USB (serial / COM)</SelectItem>
+              <SelectItem value="httpgen">{t('station.typeHttpGen')}</SelectItem>
             </SelectContent>
           </Select>
         </div>
@@ -619,7 +594,7 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           <Input value={device.name} placeholder={TYPE_LABEL[device.type]} onChange={(e) => onChange({ ...device, name: e.target.value })} />
         </div>
       </div>
-      {(isDenkovi || isUsbRelay || isDingtian) && (
+      {(isDenkovi || isUsbRelay || isDingtian || isHTTPGen) && (
         <div className="space-y-1 max-w-[10rem]">
           <Label>{t('station.channels')}</Label>
           <Select value={String(chanCount(device))} onValueChange={(v) => setChannels(parseInt(v, 10))}>
@@ -667,11 +642,17 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           </div>
           <p className="text-[10px] text-muted-foreground">{t('station.usbRelayHint')}</p>
         </div>
-      ) : (
+      ) : isHTTPGen ? null : (
+      /* No Host for the generic board: its driver never reads one. Each URL
+         below carries its own address, and they need not even share it — one
+         relay can sit on a different box from the next. A field that changes
+         nothing is worse than no field: it reads as the thing to fill in first,
+         and then the URLs look like they should be relative to it. */
       <div className={cn('grid gap-3', (isKM || isDingtian) ? 'grid-cols-3' : 'grid-cols-1')}>
         <div className={cn('space-y-1', (isKM || isDingtian) ? '' : 'max-w-xs')}>
           <Label>{t('station.host')}</Label>
           <Input className="font-mono" value={device.host} placeholder="192.168.1.100" onChange={(e) => onChange({ ...device, host: e.target.value })} />
+          <span className="text-[10px] text-muted-foreground">{t('station.hostHint')}</span>
         </div>
         {/* Dingtian: both are OFF on a factory board — the session ID only when
             "HTTP Session" is enabled in its web page, the password only when a
@@ -704,8 +685,76 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
         )}
       </div>
       )}
+      {/* Generic HTTP board: a URL to switch each relay on and one to switch it
+          off. Two ways to fill it, and the per-relay one is why this type
+          exists — a hand-made switch often has URLs with nothing in common
+          between channels, which no pattern can express. */}
+      {isHTTPGen && (
+        <div className="space-y-3 rounded-md border border-border/60 p-3">
+          <div className="grid grid-cols-2 gap-3">
+            <div className="space-y-1">
+              <Label>{t('station.onPattern')}</Label>
+              <Input className="font-mono text-xs" placeholder="http://192.168.1.9/relay?n={relay}&state=on"
+                value={device.on_pattern ?? ''}
+                onChange={(e) => onChange({ ...device, on_pattern: e.target.value })} />
+            </div>
+            <div className="space-y-1">
+              <Label>{t('station.offPattern')}</Label>
+              <Input className="font-mono text-xs" placeholder="http://192.168.1.9/relay?n={relay}&state=off"
+                value={device.off_pattern ?? ''}
+                onChange={(e) => onChange({ ...device, off_pattern: e.target.value })} />
+            </div>
+          </div>
+          <div className="text-[10px] text-muted-foreground">{t('station.patternHint')}</div>
+          {/* Shown only once an https:// URL is actually in use. A board on
+              plain HTTP has no certificate to argue about, and an option that
+              cannot matter yet is one more thing to wonder about. */}
+          {usesHTTPS && (
+            <label className="flex items-start gap-2 text-xs cursor-pointer">
+              <Checkbox className="mt-0.5" checked={!!device.insecure_tls}
+                onCheckedChange={(c) => onChange({ ...device, insecure_tls: !!c })} />
+              <span>
+                {t('station.insecureTls')}
+                <span className="block text-[10px] text-muted-foreground">{t('station.insecureTlsHint')}</span>
+              </span>
+            </label>
+          )}
+          <div className="space-y-1">
+            <Label>{t('station.perRelayUrls')}</Label>
+            <div className="space-y-1">
+              {device.labels.map((_, i) => (
+                <div key={i} className="grid grid-cols-[2.5rem_1fr_1fr] items-center gap-2">
+                  <span className="text-[11px] text-muted-foreground">{i + 1}</span>
+                  <Input className="h-8 font-mono text-[11px]" placeholder={t('station.onUrlPh')}
+                    value={device.on_urls?.[i] ?? ''}
+                    onChange={(e) => {
+                      const on_urls = [...(device.on_urls ?? [])];
+                      while (on_urls.length < device.labels.length) on_urls.push('');
+                      on_urls[i] = e.target.value;
+                      onChange({ ...device, on_urls });
+                    }} />
+                  <Input className="h-8 font-mono text-[11px]" placeholder={t('station.offUrlPh')}
+                    value={device.off_urls?.[i] ?? ''}
+                    onChange={(e) => {
+                      const off_urls = [...(device.off_urls ?? [])];
+                      while (off_urls.length < device.labels.length) off_urls.push('');
+                      off_urls[i] = e.target.value;
+                      onChange({ ...device, off_urls });
+                    }} />
+                </div>
+              ))}
+            </div>
+            <div className="text-[10px] text-muted-foreground">{t('station.perRelayHint')}</div>
+          </div>
+        </div>
+      )}
+
       <div className="space-y-1">
         <Label>{t('station.labels')}</Label>
+        {/* {value} sends the label, so an unnamed relay would go out as "?on=".
+            Said here, beside the empty box, rather than when the antenna fails
+            to switch and the log is the only place that explains why. */}
+        {valueNeedsLabels && <p className="text-[10px] text-warning">{t('station.valueNeedsLabels')}</p>}
         <div className="grid grid-cols-4 gap-2">
           {device.labels.map((lab, i) => (
             <Input key={i} value={lab} placeholder={`${t('station.relay')} ${i + 1}`} className="h-8 text-xs"
@@ -721,12 +770,20 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           </span>
         )}
         <div className="ml-auto flex gap-2">
+          {/* No connection test for the generic board, and no host required to
+              save it. There is nothing to test: it has no address of its own and
+              no status to read — its URLs are fired and forgotten. A button that
+              can only ever say "OK, 4 relays" tests nothing, and a Save greyed
+              out for a missing host made a perfectly complete configuration —
+              four full URLs — impossible to store. */}
+          {!isHTTPGen && (
             <Button size="sm" variant="outline" onClick={testDevice} disabled={testing || !device.host.trim()}>
               {testing ? <Loader2 className="size-3.5 mr-1 animate-spin" /> : <PlugZap className="size-3.5 mr-1" />}
               {t('station.test')}
             </Button>
+          )}
           <Button size="sm" variant="ghost" onClick={onCancel}><X className="size-3.5 mr-1" />{t('station.cancel')}</Button>
-          <Button size="sm" onClick={onSave} disabled={!device.host.trim()}><Check className="size-3.5 mr-1" />{t('station.save')}</Button>
+          <Button size="sm" onClick={onSave} disabled={!isHTTPGen && !device.host.trim()}><Check className="size-3.5 mr-1" />{t('station.save')}</Button>
         </div>
       </div>
     </div>

frontend/src/components/StatsPanel.tsx

@@ -29,6 +29,7 @@ type ContestRun = { id: string; year: number; count: number; start: string; end:
 type Stats = {
   total: number; unique_calls: number; entities: number; continents: number;
   first_qso: string; last_qso: string;
+  last_new_dxcc: string; last_new_dxcc_num: number; last_new_dxcc_call: string; last_new_dxcc_date: string;
   confirmed_lotw: number; confirmed_eqsl: number; confirmed_qsl: number; confirmed_any: number;
   by_mode: Bucket[]; by_band: Bucket[]; by_band_category: BandCat[]; by_operator: Bucket[]; by_station: Bucket[];
   by_continent: Bucket[]; top_entities: Bucket[]; by_year: Bucket[]; by_month: Bucket[];
@@ -681,6 +682,16 @@ export function StatsPanel() {
   // real operating session (which is exactly when an hourly rate chart exists).
   const windowed = contest !== '' || (period === 'custom' && (stats?.rate?.length ?? 0) > 1);
 
+  // "last new: France - F5ABC - 2019-03-01": the entity most recently added to
+  // the log, and the contact that added it. Empty when no dated entity exists.
+  const lastNew = useMemo(() => {
+    if (!stats?.last_new_dxcc_date) return '';
+    const day = stats.last_new_dxcc_date.slice(0, 10);
+    const who = stats.last_new_dxcc_call ? ` · ${stats.last_new_dxcc_call}` : '';
+    const what = stats.last_new_dxcc || String(stats.last_new_dxcc_num || '');
+    return `${t('stats.lastNewDxcc')}: ${what}${who} · ${day}`;
+  }, [stats, t]);
+
   const span = useMemo(() => {
     if (!stats?.first_qso) return '';
     const f = new Date(stats.first_qso), l = new Date(stats.last_qso);
@@ -774,7 +785,11 @@ export function StatsPanel() {
       <div className="grid grid-cols-2 md:grid-cols-5 gap-2.5 mb-3">
         <StatTile label={t('stats.qsos')} value={nf(stats.total)} sub={span} accent="var(--chart-1)" />
         <StatTile label={t('stats.uniqueCalls')} value={nf(stats.unique_calls)} accent="var(--chart-2)" />
-        <StatTile label={t('stats.entities')} value={nf(stats.entities)} sub="DXCC" accent="var(--chart-5)" />
+        {/* The last one ADDED rides on the entities tile: it is the same
+            subject, and a tile of its own would push the five headline figures
+            onto two rows for one line of text. */}
+        <StatTile label={t('stats.entities')} value={nf(stats.entities)}
+          sub={lastNew || "DXCC"} accent="var(--chart-5)" />
         <StatTile label={t('stats.continents')} value={nf(stats.continents)} sub="/ 7" accent="var(--chart-8)" />
         <StatTile label={t('stats.confirmed')} value={`${stats.total ? ((stats.confirmed_any / stats.total) * 100).toFixed(0) : 0}%`}
           sub={`${nf(stats.confirmed_any)} / ${nf(stats.total)}`} accent="var(--success)" />

frontend/src/components/UDPIntegrationsPanel.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useState } from 'react';
+import React, { useCallback, useEffect, useState } from 'react';
 import { Plus, Trash2, Edit2, RefreshCcw, ArrowDownToLine, ArrowUpFromLine } from 'lucide-react';
 import {
   ListUDPIntegrations, SaveUDPIntegration, DeleteUDPIntegration, ReloadUDPIntegrations,
@@ -24,7 +24,13 @@ type UDPConfig = {
   direction: 'inbound' | 'outbound';
   name: string;
   port: number;
-  service_type: 'wsjt' | 'adif' | 'n1mm' | 'remote_call' | 'db_updated' | 'pstrotator_freq' | 'n1mm_radioinfo';
+  service_type: 'wsjt' | 'adif' | 'n1mm' | 'remote_call' | 'db_updated' | 'pstrotator_freq' | 'n1mm_radioinfo' | 'wsjt_log' | 'wsjt_relay' | 'custom';
+  // Custom rows only.
+  trigger?: string;
+  template?: string;
+  transport?: string;
+  url?: string;
+  line_end?: string;
   multicast: boolean;
   multicast_group: string;
   destination_ip: string;
@@ -77,6 +83,41 @@ const SERVICE_TYPES: Array<{
     hint: 'udpp.svcDbHint',
     defaults: { port: 2333, destination_ip: '127.0.0.1' },
   },
+  {
+    // Announces the QSO on the WSJT-X UDP interface instead of as plain text.
+    // Named for the protocol, not for one program: Logger32 is what it was
+    // built against, but anything listening on that interface takes it, and a
+    // label saying "Logger32" would have every other operator scroll past.
+    // 2250 is Logger32's first additional socket — a starting point, not a rule.
+    id: 'wsjt_log',
+    direction: 'outbound',
+    label: 'udpp.svcWsjtLogLabel',
+    hint: 'udpp.svcWsjtLogHint',
+    defaults: { port: 2250, destination_ip: '127.0.0.1' },
+  },
+  {
+    // Feeds a SECOND application the stream this OpsLog receives. WSJT-X, JTDX
+    // and MSHV each send to ONE address, so without a relay the choice is
+    // between OpsLog and JTAlert/GridTracker rather than both.
+    //
+    // 2238 by default: beside the 2237 the sender uses, and free. Pointing it AT
+    // 2237 would name an OpsLog listener, which the relay refuses.
+    id: 'wsjt_relay',
+    direction: 'outbound',
+    label: 'udpp.svcWsjtRelayLabel',
+    hint: 'udpp.svcWsjtRelayHint',
+    defaults: { port: 2238, destination_ip: '127.0.0.1' },
+  },
+  {
+    // The general case: the operator picks the moment and writes the message.
+    // Mainly for antenna switches, which are driven by a URL and want the band
+    // change — but nothing about it is specific to them.
+    id: 'custom',
+    direction: 'outbound',
+    label: 'udpp.svcCustomLabel',
+    hint: 'udpp.svcCustomHint',
+    defaults: { port: 12000, destination_ip: '127.0.0.1' },
+  },
   {
     id: 'pstrotator_freq',
     direction: 'outbound',
@@ -93,6 +134,27 @@ const SERVICE_TYPES: Array<{
   },
 ];
 
+// The fields each trigger carries, and NOTHING else.
+//
+// This list is the point of the whole feature. A rotation has no frequency, a
+// lookup has no report — and a placeholder the trigger cannot fill renders as
+// nothing at all. Without seeing what is available, an operator writes {freq}
+// on a band change, gets an empty string, and has no way to learn why. So the
+// panel prints them under the box, for the trigger actually selected.
+const TRIGGER_FIELDS: Record<string, string[]> = {
+  qso_logged: ['call', 'band', 'band_m', 'mode', 'freq_hz', 'freq_mhz', 'grid', 'name', 'country', 'dxcc', 'rst_s', 'rst_r', 'comment', 'date', 'time'],
+  rotator_goto: ['az', 'el', 'path'],
+  lookup_done: ['call', 'name', 'grid', 'country', 'qth', 'state', 'dxcc'],
+  band_change: ['band', 'band_m', 'freq_hz', 'freq_mhz', 'mode'],
+};
+
+const TRIGGERS = [
+  { id: 'band_change', label: 'udpp.trgBand' },
+  { id: 'qso_logged', label: 'udpp.trgQso' },
+  { id: 'rotator_goto', label: 'udpp.trgRotator' },
+  { id: 'lookup_done', label: 'udpp.trgLookup' },
+];
+
 type Props = { onError: (msg: string) => void };
 
 export function UDPIntegrationsPanel({ onError }: Props) {
@@ -124,6 +186,7 @@ export function UDPIntegrationsPanel({ onError }: Props) {
       destination_ip: preset.defaults.destination_ip ?? '',
       enabled: true,
       sort_order: items.filter((i) => i.direction === direction).length,
+      trigger: '', template: '', transport: 'udp', url: '', line_end: '',
     });
   }
 
@@ -376,7 +439,7 @@ function EditDialog({
             </div>
           )}
 
-          {draft.direction === 'outbound' && (
+          {draft.direction === 'outbound' && draft.service_type !== 'custom' && (
             <div className="space-y-1">
               <Label>{t('udpp.destinationIp')}</Label>
               <Input
@@ -388,6 +451,10 @@ function EditDialog({
             </div>
           )}
 
+          {draft.service_type === 'custom' && (
+            <CustomFields draft={draft} setDraft={setDraft} />
+          )}
+
           <label className="flex items-center gap-2 text-sm cursor-pointer">
             <Checkbox
               checked={draft.enabled}
@@ -413,3 +480,108 @@ function EditDialog({
 
 // silence unused-import for cn — kept for future styling tweaks
 void cn;
+
+// CustomFields is the editor for a custom outbound row: what fires it, how it
+// leaves, and what it says.
+function CustomFields({ draft, setDraft }: {
+  draft: UDPConfig;
+  setDraft: React.Dispatch<React.SetStateAction<UDPConfig>>;
+}) {
+  const { t } = useI18n();
+  const fields = TRIGGER_FIELDS[draft.trigger ?? ''] ?? [];
+  const isURL = draft.transport === 'url';
+  return (
+    <div className="space-y-4 rounded-md border border-border/60 p-3">
+      <div className="grid grid-cols-2 gap-3">
+        <div className="space-y-1">
+          <Label>{t('udpp.trigger')}</Label>
+          <Select value={draft.trigger || 'band_change'} onValueChange={(v) => setDraft((d) => ({ ...d, trigger: v }))}>
+            <SelectTrigger><SelectValue /></SelectTrigger>
+            <SelectContent>
+              {TRIGGERS.map((x) => <SelectItem key={x.id} value={x.id}>{t(x.label)}</SelectItem>)}
+            </SelectContent>
+          </Select>
+        </div>
+        <div className="space-y-1">
+          <Label>{t('udpp.transport')}</Label>
+          <Select value={draft.transport || 'udp'} onValueChange={(v) => setDraft((d) => ({ ...d, transport: v }))}>
+            <SelectTrigger><SelectValue /></SelectTrigger>
+            <SelectContent>
+              <SelectItem value="udp">{t('udpp.transportUdp')}</SelectItem>
+              <SelectItem value="url">{t('udpp.transportUrl')}</SelectItem>
+            </SelectContent>
+          </Select>
+        </div>
+      </div>
+
+      {/* The one place these two features overlap. A relay board is a STATE per
+          band, not an event: Station Control tracks it, reads the boards at
+          startup and does not re-switch while the VFO moves inside a band. A
+          URL fired on a band change has none of that, and building the mapping
+          by hand here is work that is already done there. */}
+      {draft.trigger === 'band_change' && isURL && (
+        <div className="rounded border border-warning-border bg-warning-muted px-2 py-1.5 text-[11px] text-warning-muted-foreground leading-relaxed">
+          {t('udpp.relayInstead')}
+        </div>
+      )}
+
+      {isURL ? (
+        <div className="space-y-1">
+          <Label>{t('udpp.url')}</Label>
+          <Input
+            className="font-mono text-xs"
+            placeholder="http://192.168.1.50/antenna?band={band}"
+            value={draft.url ?? ''}
+            onChange={(e) => setDraft((d) => ({ ...d, url: e.target.value }))}
+          />
+          <div className="text-[10px] text-muted-foreground">{t('udpp.urlHint')}</div>
+        </div>
+      ) : (
+        <>
+          <div className="grid grid-cols-[1fr_auto] gap-2">
+            <div className="space-y-1">
+              <Label>{t('udpp.destinationIp')}</Label>
+              <Input
+                className="font-mono"
+                placeholder="127.0.0.1"
+                value={draft.destination_ip}
+                onChange={(e) => setDraft((d) => ({ ...d, destination_ip: e.target.value }))}
+              />
+            </div>
+            <div className="space-y-1">
+              <Label>{t('udpp.lineEnd')}</Label>
+              <Select value={draft.line_end || 'none'} onValueChange={(v) => setDraft((d) => ({ ...d, line_end: v === 'none' ? '' : v }))}>
+                <SelectTrigger className="w-28"><SelectValue /></SelectTrigger>
+                <SelectContent>
+                  <SelectItem value="none">{t('udpp.lineEndNone')}</SelectItem>
+                  <SelectItem value="lf">LF</SelectItem>
+                  <SelectItem value="crlf">CRLF</SelectItem>
+                </SelectContent>
+              </Select>
+            </div>
+          </div>
+          <div className="space-y-1">
+            <Label>{t('udpp.template')}</Label>
+            <textarea
+              className="w-full min-h-[64px] rounded-md border border-input bg-background px-2 py-1.5 font-mono text-xs"
+              placeholder="<AZIMUT>{az}</AZIMUT>"
+              value={draft.template ?? ''}
+              onChange={(e) => setDraft((d) => ({ ...d, template: e.target.value }))}
+            />
+          </div>
+        </>
+      )}
+
+      {/* What this trigger can actually fill in. */}
+      <div className="space-y-1">
+        <div className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('udpp.fieldsAvailable')}</div>
+        <div className="flex flex-wrap gap-1">
+          {fields.map((f) => (
+            <code key={f} className="rounded bg-muted px-1 py-px text-[10px] text-muted-foreground">{`{${f}}`}</code>
+          ))}
+        </div>
+        <div className="text-[10px] text-muted-foreground">{t('udpp.fieldsHint')}</div>
+      </div>
+    </div>
+  );
+}

frontend/src/components/WebPublishPanel.tsx

@@ -0,0 +1,275 @@
+import { useEffect, useState } from 'react';
+import { Upload, FolderOpen, Loader2, ChevronsUpDown } from 'lucide-react';
+import {
+  GetWebPublishConfig, SaveWebPublishConfig, WebPublishColumns,
+  TestWebPublishFTP, PublishLogNow, GetWebPublishStatus, PickBackupFolder,
+} from '../../wailsjs/go/main/App';
+import { Button } from '@/components/ui/button';
+import { Input } from '@/components/ui/input';
+import { Label } from '@/components/ui/label';
+import { Checkbox } from '@/components/ui/checkbox';
+import { Select, SelectTrigger, SelectValue, SelectContent, SelectItem } from '@/components/ui/select';
+import {
+  DropdownMenu, DropdownMenuTrigger, DropdownMenuContent, DropdownMenuCheckboxItem,
+} from '@/components/ui/dropdown-menu';
+import { useI18n } from '@/lib/i18n';
+import { cn } from '@/lib/utils';
+
+type Cfg = {
+  enabled: boolean; format: string; folder: string; file_name: string; title: string;
+  count: number; interval_min: number; columns: string[];
+  ftp_enabled: boolean; ftp_host: string; ftp_port: number; ftp_user: string;
+  ftp_password: string; ftp_tls: boolean; ftp_folder: string; ftp_file_name: string;
+};
+type Col = { key: string; header: string; group: string };
+
+export function WebPublishPanel() {
+  const { t } = useI18n();
+  const [cfg, setCfg] = useState<Cfg | null>(null);
+  const [cols, setCols] = useState<Col[]>([]);
+  // The catalogue is 123 fields, so the picker is a dropdown with a search box
+  // rather than anything laid out on the page. Chosen columns stay visible above
+  // it, in publication order: after picking eight out of a hundred the question
+  // stops being 'what exists' and becomes 'what did I pick, and how will it print'.
+  const [colSearch, setColSearch] = useState('');
+  const [busy, setBusy] = useState<'' | 'test' | 'publish'>('');
+  const [msg, setMsg] = useState('');
+  const [err, setErr] = useState('');
+  // Raw text for the two numeric boxes: bound straight to the number they could
+  // not be cleared, the same trap as the Recent-QSOs Max field.
+  const [countText, setCountText] = useState('');
+  const [everyText, setEveryText] = useState('');
+
+  useEffect(() => {
+    (async () => {
+      try {
+        const [c, k, st] = await Promise.all([GetWebPublishConfig(), WebPublishColumns(), GetWebPublishStatus()]);
+        setCfg(c as any);
+        setCols((k ?? []) as Col[]);
+        setCountText(String((c as any).count ?? 100));
+        setEveryText(String((c as any).interval_min ?? 0));
+        const s: any = st;
+        if (s?.last_err) setErr(s.last_err);
+        else if (s?.last_run) setMsg(t('wpub.lastRun') + ' ' + s.last_run);
+      } catch (e: any) { setErr(String(e?.message ?? e)); }
+    })();
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, []);
+
+  if (!cfg) return <p className="text-xs text-muted-foreground">…</p>;
+  const set = (p: Partial<Cfg>) => setCfg((c) => (c ? { ...c, ...p } : c));
+
+  // Every control saves immediately: this panel has no Save button of its own,
+  // matching the other "saved instantly" panels.
+  const save = async (next: Cfg) => {
+    setCfg(next);
+    try { await SaveWebPublishConfig(next as any); setErr(''); }
+    catch (e: any) { setErr(String(e?.message ?? e)); }
+  };
+  const patch = (p: Partial<Cfg>) => save({ ...cfg, ...p });
+
+  const toggleCol = (key: string) => {
+    const has = cfg.columns?.includes(key);
+    patch({ columns: has ? cfg.columns.filter((c) => c !== key) : [...(cfg.columns ?? []), key] });
+  };
+
+  const run = async (what: 'test' | 'publish') => {
+    setBusy(what); setMsg(''); setErr('');
+    try {
+      const r = what === 'test' ? await TestWebPublishFTP(cfg as any) : await PublishLogNow();
+      setMsg(String(r));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
+    finally { setBusy(''); }
+  };
+
+  return (
+    <div className="space-y-4 max-w-3xl">
+      <p className="text-xs text-muted-foreground leading-relaxed">{t('wpub.hint')}</p>
+
+      <label className="flex items-center gap-2 text-sm cursor-pointer">
+        <Checkbox checked={cfg.enabled} onCheckedChange={(c) => patch({ enabled: !!c })} />
+        {t('wpub.enable')}
+      </label>
+
+      {cfg.enabled && (<>
+        {/* ── The file ── */}
+        <div className="space-y-2 border-t border-border/60 pt-3">
+          <Label className="text-xs font-semibold">{t('wpub.fileSection')}</Label>
+          <div className="grid grid-cols-[130px_1fr] gap-2 items-center">
+            <Label className="text-sm">{t('wpub.format')}</Label>
+            <Select value={cfg.format} onValueChange={(v) => patch({ format: v })}>
+              <SelectTrigger className="h-8 w-56"><SelectValue /></SelectTrigger>
+              <SelectContent>
+                <SelectItem value="html">{t('wpub.formatHtml')}</SelectItem>
+                <SelectItem value="csv">{t('wpub.formatCsv')}</SelectItem>
+              </SelectContent>
+            </Select>
+
+            <Label className="text-sm">{t('wpub.folder')}</Label>
+            <div className="flex gap-2">
+              <Input className="h-8 font-mono text-xs flex-1" value={cfg.folder}
+                onChange={(e) => set({ folder: e.target.value })} onBlur={() => patch({ folder: cfg.folder })} />
+              <Button variant="outline" size="sm" className="h-8" onClick={async () => {
+                try { const p = await PickBackupFolder(); if (p) patch({ folder: p }); } catch { /* cancelled */ }
+              }}><FolderOpen className="size-3.5" /> {t('wpub.browse')}</Button>
+            </div>
+
+            <Label className="text-sm">{t('wpub.fileName')}</Label>
+            <Input className="h-8 w-56 font-mono text-xs" value={cfg.file_name}
+              onChange={(e) => set({ file_name: e.target.value })} onBlur={() => patch({ file_name: cfg.file_name })} />
+
+            <Label className="text-sm">{t('wpub.title')}</Label>
+            <Input className="h-8" placeholder={t('wpub.titlePh')} value={cfg.title}
+              onChange={(e) => set({ title: e.target.value })} onBlur={() => patch({ title: cfg.title })} />
+
+            <Label className="text-sm">{t('wpub.count')}</Label>
+            <Input type="number" min={1} max={100000} className="h-8 w-28 font-mono text-xs" value={countText}
+              onChange={(e) => setCountText(e.target.value)}
+              onBlur={() => {
+                const n = Math.floor(Number(countText));
+                if (Number.isFinite(n) && n > 0) patch({ count: n }); else setCountText(String(cfg.count));
+              }} />
+
+            <Label className="text-sm">{t('wpub.every')}</Label>
+            <div className="flex items-center gap-2">
+              <Input type="number" min={0} max={1440} className="h-8 w-28 font-mono text-xs" value={everyText}
+                onChange={(e) => setEveryText(e.target.value)}
+                onBlur={() => {
+                  const n = Math.floor(Number(everyText));
+                  if (Number.isFinite(n) && n >= 0) patch({ interval_min: n }); else setEveryText(String(cfg.interval_min));
+                }} />
+              <span className="text-xs text-muted-foreground">{t('wpub.everyHint')}</span>
+            </div>
+          </div>
+        </div>
+
+        {/* ── Columns ── */}
+        <div className="space-y-2 border-t border-border/60 pt-3">
+          <div className="flex items-center justify-between">
+            <Label className="text-xs font-semibold">{t('wpub.columns')}</Label>
+            <span className="text-[11px] text-muted-foreground">
+              {t('wpub.columnsCount', { n: cfg.columns?.length ?? 0, total: cols.length })}
+            </span>
+          </div>
+
+          {/* CHOSEN, in publication order — this is the list that answers "what
+              will the page look like", which a sectioned catalogue cannot. */}
+          {(cfg.columns?.length ?? 0) > 0 && (
+            <div className="flex flex-wrap gap-1.5">
+              {cfg.columns.map((k) => {
+                const c = cols.find((x) => x.key === k);
+                return (
+                  <button key={k} type="button" onClick={() => toggleCol(k)}
+                    title={t('wpub.removeColumn')}
+                    className="px-2 py-0.5 rounded-full border border-primary bg-primary text-primary-foreground text-[11px] font-medium">
+                    {c?.header ?? k} ×
+                  </button>
+                );
+              })}
+            </div>
+          )}
+
+          {/* One dropdown, alphabetical, filtered as you type. The catalogue is
+              123 fields: laid out on the page it buries every other setting, and
+              sorting by anything but the alphabet means hunting. The menu stays
+              open while ticking — picking eight columns should be one visit. */}
+          <DropdownMenu>
+            <DropdownMenuTrigger asChild>
+              <Button variant="outline" size="sm" className="w-full justify-between h-8 text-xs font-normal">
+                {t('wpub.columnsPick')}
+                <ChevronsUpDown className="size-3.5 opacity-60" />
+              </Button>
+            </DropdownMenuTrigger>
+            {/* The search box is OUTSIDE the scrolling area, not sticky inside it.
+                Sticky kept it in place but the rows scrolled over it: a menu item
+                carries its own background and its own stacking, so it wins over a
+                sticky sibling however high its z-index. A header that never
+                scrolls has nothing to lose the fight with. */}
+            <DropdownMenuContent align="start" className="w-72 p-0 flex flex-col max-h-80">
+              <div className="p-1.5 border-b border-border/60 bg-popover shrink-0">
+                <Input className="h-7 text-xs" placeholder={t('wpub.columnsSearch')}
+                  value={colSearch}
+                  onChange={(e) => setColSearch(e.target.value)}
+                  onKeyDown={(e) => e.stopPropagation()} />
+              </div>
+              <div className="overflow-y-auto p-1">
+              {[...cols]
+                .sort((a, b) => a.header.localeCompare(b.header))
+                .filter((c) => {
+                  const q = colSearch.trim().toLowerCase();
+                  return !q || c.header.toLowerCase().includes(q) || c.key.toLowerCase().includes(q);
+                })
+                .map((c) => (
+                  <DropdownMenuCheckboxItem
+                    key={c.key}
+                    checked={cfg.columns?.includes(c.key) ?? false}
+                    onCheckedChange={() => toggleCol(c.key)}
+                    onSelect={(e) => e.preventDefault()}
+                    className="text-xs"
+                  >
+                    {c.header}
+                    <span className="ml-auto pl-2 text-[10px] text-muted-foreground font-mono">{c.group}</span>
+                  </DropdownMenuCheckboxItem>
+                ))}
+              </div>
+            </DropdownMenuContent>
+          </DropdownMenu>
+          <p className="text-[11px] text-muted-foreground">{t('wpub.columnsHint')}</p>
+        </div>
+
+        {/* ── Upload ── */}
+        <div className="space-y-2 border-t border-border/60 pt-3">
+          <label className="flex items-center gap-2 text-sm cursor-pointer">
+            <Checkbox checked={cfg.ftp_enabled} onCheckedChange={(c) => patch({ ftp_enabled: !!c })} />
+            {t('wpub.ftpEnable')}
+          </label>
+          {cfg.ftp_enabled && (
+            <div className="grid grid-cols-[130px_1fr] gap-2 items-center">
+              <Label className="text-sm">{t('wpub.ftpHost')}</Label>
+              <div className="flex gap-2">
+                <Input className="h-8 flex-1" placeholder="ftp.example.com" value={cfg.ftp_host}
+                  onChange={(e) => set({ ftp_host: e.target.value })} onBlur={() => patch({ ftp_host: cfg.ftp_host })} />
+                <Input type="number" className="h-8 w-24 font-mono text-xs" value={cfg.ftp_port}
+                  onChange={(e) => set({ ftp_port: Number(e.target.value) || 21 })}
+                  onBlur={() => patch({ ftp_port: cfg.ftp_port })} />
+              </div>
+              <Label className="text-sm">{t('wpub.ftpUser')}</Label>
+              <Input className="h-8" value={cfg.ftp_user}
+                onChange={(e) => set({ ftp_user: e.target.value })} onBlur={() => patch({ ftp_user: cfg.ftp_user })} />
+              <Label className="text-sm">{t('wpub.ftpPassword')}</Label>
+              <Input type="password" className="h-8" value={cfg.ftp_password}
+                onChange={(e) => set({ ftp_password: e.target.value })} onBlur={() => patch({ ftp_password: cfg.ftp_password })} />
+              <Label className="text-sm">{t('wpub.ftpFolder')}</Label>
+              <Input className="h-8 font-mono text-xs" placeholder="/www/log" value={cfg.ftp_folder}
+                onChange={(e) => set({ ftp_folder: e.target.value })} onBlur={() => patch({ ftp_folder: cfg.ftp_folder })} />
+              <Label className="text-sm">{t('wpub.ftpFileName')}</Label>
+              <Input className="h-8 w-56 font-mono text-xs" value={cfg.ftp_file_name}
+                onChange={(e) => set({ ftp_file_name: e.target.value })} onBlur={() => patch({ ftp_file_name: cfg.ftp_file_name })} />
+              <span />
+              <label className="flex items-center gap-2 text-sm cursor-pointer">
+                <Checkbox checked={cfg.ftp_tls} onCheckedChange={(c) => patch({ ftp_tls: !!c })} />
+                {t('wpub.ftpTls')}
+              </label>
+            </div>
+          )}
+        </div>
+
+        <div className="flex items-center gap-3 border-t border-border/60 pt-3 flex-wrap">
+          <Button size="sm" onClick={() => run('publish')} disabled={busy !== ''}>
+            {busy === 'publish' ? <Loader2 className="size-3.5 animate-spin" /> : <Upload className="size-3.5" />}
+            {t('wpub.publishNow')}
+          </Button>
+          {cfg.ftp_enabled && (
+            <Button variant="outline" size="sm" onClick={() => run('test')} disabled={busy !== ''}>
+              {busy === 'test' ? <Loader2 className="size-3.5 animate-spin" /> : null}
+              {t('wpub.testFtp')}
+            </Button>
+          )}
+        </div>
+      </>)}
+
+      {msg && <p className="text-xs text-success break-all">{msg}</p>}
+      {err && <p className="text-xs text-danger break-all">{err}</p>}
+    </div>
+  );
+}

frontend/src/components/WheelRange.tsx

@@ -0,0 +1,62 @@
+import { useEffect, useRef } from 'react';
+import { cn } from '@/lib/utils';
+
+// A range slider the mouse wheel can move.
+//
+// Dragging a 4-pixel-tall slider to change the power by five watts is a fussy
+// gesture; rolling the wheel over it is not, and it is what an operator reaches
+// for after using the Flex and Yaesu consoles, which have had it for a while.
+//
+// React's own onWheel is registered PASSIVE, so preventDefault() inside it is
+// ignored and the panel scrolls under the pointer while the value changes. The
+// listener therefore has to be attached natively with { passive: false }, and
+// the live values read through refs — the listener is installed once and would
+// otherwise capture the first render's value for ever.
+//
+// The Flex and Yaesu panels each grew their own copy of this before it was worth
+// sharing. They are left alone deliberately: they work, they are in daily use,
+// and their styling differs in small ways that a merge would have to guess at.
+export function WheelRange({ value, onChange, min = 0, max = 100, step = 1, disabled, accent = 'var(--primary)', className }: {
+  value: number; onChange: (v: number) => void;
+  min?: number; max?: number; step?: number; disabled?: boolean; accent?: string; className?: string;
+}) {
+  const v = Math.max(min, Math.min(max, value));
+  const pct = max > min ? ((v - min) / (max - min)) * 100 : 0;
+  const ref = useRef<HTMLInputElement>(null);
+  const valRef = useRef(v); valRef.current = v;
+  const cbRef = useRef(onChange); cbRef.current = onChange;
+  const disRef = useRef(disabled); disRef.current = disabled;
+  const stepRef = useRef(step); stepRef.current = step;
+  const minRef = useRef(min); minRef.current = min;
+  const maxRef = useRef(max); maxRef.current = max;
+
+  useEffect(() => {
+    const el = ref.current;
+    if (!el) return;
+    const onWheel = (e: WheelEvent) => {
+      if (disRef.current) return;
+      e.preventDefault();
+      const d = e.deltaY < 0 ? stepRef.current : -stepRef.current;
+      const nv = Math.max(minRef.current, Math.min(maxRef.current, valRef.current + d));
+      if (nv !== valRef.current) cbRef.current(nv);
+    };
+    el.addEventListener('wheel', onWheel, { passive: false });
+    return () => el.removeEventListener('wheel', onWheel);
+  }, []);
+
+  return (
+    <input
+      ref={ref}
+      type="range" min={min} max={max} step={step} value={v} disabled={disabled}
+      onChange={(e) => onChange(parseInt(e.target.value, 10))}
+      className={cn('flex-1 h-1.5 rounded-full appearance-none cursor-pointer disabled:opacity-30 disabled:cursor-default',
+        '[&::-webkit-slider-thumb]:appearance-none [&::-webkit-slider-thumb]:size-3.5 [&::-webkit-slider-thumb]:rounded-full',
+        '[&::-webkit-slider-thumb]:bg-card [&::-webkit-slider-thumb]:border-2 [&::-webkit-slider-thumb]:shadow-sm [&::-webkit-slider-thumb]:cursor-pointer',
+        className)}
+      style={{
+        background: `linear-gradient(to right, ${accent} ${pct}%, color-mix(in srgb, var(--foreground) 18%, transparent) ${pct}%)`,
+        borderColor: accent,
+      }}
+    />
+  );
+}

frontend/src/components/WinkeyerPanel.tsx

@@ -73,9 +73,17 @@ export function WinkeyerPanel({
 
   const connected = status.connected;
 
+  // Send-on-type only exists where the engine can key one character at a time:
+  // the WinKeyer and Flex CWX. The stored preference survives an engine change,
+  // though, and an Icom or Yaesu operator inherited a hidden switch that was on
+  // — the checkbox is not shown for them, so nothing keyed as they typed AND
+  // Enter sent nothing either, since it believes the text has already gone.
+  // Macros kept working, which is exactly how it looked from the outside.
+  const liveType = sendOnType && (source === 'winkeyer' || source === 'flex');
+
   function sendText() {
     const t = cwText.trim();
-    if (t && !sendOnType) onSend(t); // in send-on-type the text already went out
+    if (t && !liveType) onSend(t); // in send-on-type the text already went out
     setCwText('');
   }
 
@@ -83,7 +91,7 @@ export function WinkeyerPanel({
   // WinKeyer backspace for each deleted char (removes it from the buffer if it
   // hasn't been keyed yet). Only end-of-string edits are mirrored live.
   function onCwChange(v: string) {
-    if (sendOnType && connected) {
+    if (liveType && connected) {
       const old = cwText;
       if (v.length > old.length && v.startsWith(old)) {
         onSendRaw(v.slice(old.length));
@@ -200,13 +208,13 @@ export function WinkeyerPanel({
               value={cwText}
               onChange={(e) => onCwChange(e.target.value)}
               onKeyDown={(e) => { if (e.key === 'Enter') { e.preventDefault(); sendText(); } }}
-              placeholder={sendOnType ? t('wkp.phLive') : t('wkp.phEnter')}
+              placeholder={liveType ? t('wkp.phLive') : t('wkp.phEnter')}
               disabled={!connected}
               className="font-mono uppercase"
             />
           </div>
           <Button size="sm" className="h-8" onClick={sendText} disabled={!connected}>
-            <Send className="size-3.5" /> {sendOnType ? t('wkp.clear') : t('wkp.send')}
+            <Send className="size-3.5" /> {liveType ? t('wkp.clear') : t('wkp.send')}
           </Button>
           <Button variant="destructive" size="sm" className="h-8" onClick={onStop} disabled={!connected} title={t('wkp.abort')}>
             <Square className="size-3.5" /> {t('wkp.stop')}

frontend/src/components/WorkedBeforeGrid.tsx

@@ -35,11 +35,13 @@ type Props = {
   onUpdateFromCty?: (ids: number[]) => void;
   onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;
   onBulkEdit?: (ids: number[]) => void;
   onExportSelected?: (ids: number[]) => void;
+  onExportSelectedFull?: (ids: number[]) => void;
   onExportSelectedFields?: (ids: number[]) => void;
   onExportCabrilloSelected?: (ids: number[]) => void;
   onDelete?: (ids: number[]) => void;
@@ -57,7 +59,7 @@ function fmtDate(s: any): string {
   return `${d.getUTCFullYear()}-${p(d.getUTCMonth() + 1)}-${p(d.getUTCDate())}`;
 }
 
-export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleClicked, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportCabrilloSelected, onDelete, awardCols }: Props) {
+export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleClicked, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onUpdateCountyFromULS, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFull, onExportSelectedFields, onExportCabrilloSelected, onDelete, awardCols }: Props) {
   const { t } = useI18n();
   const gridRef = useRef<any>(null);
   const [pickerOpen, setPickerOpen] = useState(false);
@@ -272,11 +274,13 @@ export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleCli
         onUpdateFromCty={(ids) => onUpdateFromCty?.(ids)}
         onUpdateFromQRZ={(ids) => onUpdateFromQRZ?.(ids)}
         onUpdateFromClublog={onUpdateFromClublog}
+        onUpdateCountyFromULS={onUpdateCountyFromULS}
         onSendTo={onSendTo}
         onSendRecording={onSendRecording}
         onSendEQSL={onSendEQSL}
         onBulkEdit={onBulkEdit}
         onExportSelected={onExportSelected}
+        onExportSelectedFull={onExportSelectedFull}
         onExportSelectedFields={onExportSelectedFields}
         onExportCabrilloSelected={onExportCabrilloSelected}
         onDelete={onDelete}
@@ -296,6 +300,20 @@ export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleCli
               {t('wbg.pickerDesc')}
             </DialogDescription>
           </DialogHeader>
+          {/* Whole-dialog controls — the award columns included, which the
+              catalogue-only helpers do not cover. */}
+          <div className="flex items-center gap-1 px-5 text-[11px] text-muted-foreground">
+            <span>{t('wbg.allGroups')}</span>
+            <button type="button" className="text-[11px] text-primary hover:underline px-1"
+              onClick={() => { showAll(); (awardCols ?? []).forEach((a) => setColVisible(`award_${a.code}`, true)); }}>
+              {t('wbg.all')}
+            </button>
+            <span className="opacity-40">·</span>
+            <button type="button" className="text-[11px] text-muted-foreground hover:underline px-1"
+              onClick={() => { hideAll(); (awardCols ?? []).forEach((a) => setColVisible(`award_${a.code}`, false)); }}>
+              {t('wbg.none')}
+            </button>
+          </div>
           <div className="grid grid-cols-2 gap-4 max-h-[60vh] overflow-y-auto px-5 py-3">
             {GROUP_ORDER.map((group) => {
               const cols = COL_CATALOG.filter((c) => c.group === group);

frontend/src/components/YaesuPanel.tsx

@@ -3,7 +3,7 @@ import { Radio, AudioLines, Mic, Activity, SlidersHorizontal, Antenna } from 'lu
 import {
   GetYaesuState, RefreshYaesuPanel,
   SetYaesuPower, SetYaesuMicGain, SetYaesuAFGain, SetYaesuRFGain, SetYaesuSquelch,
-  SetYaesuAGC, SetYaesuPreamp, SetYaesuAtt, SetYaesuNB, SetYaesuNR, SetYaesuNRLevel,
+  SetYaesuAGC, SetYaesuPreamp, SetYaesuAtt, SetYaesuAntenna, SetYaesuNB, SetYaesuNR, SetYaesuNRLevel,
   SetYaesuNarrow, SetYaesuVOX, SetYaesuSplit, SetYaesuBand, TuneYaesuATU,
   SetYaesuModeRaw, SetYaesuSplitOffset, SetYaesuKeySpeed, SetYaesuBreakIn, YaesuZeroIn, GetCATState,
 } from '../../wailsjs/go/main/App';
@@ -17,8 +17,9 @@ type YaesuState = {
   transmitting: boolean; split: boolean;
   s_meter: number; power_meter: number; swr_meter: number;
   rf_power: number; mic_gain: number; af_gain: number; rf_gain: number; squelch: number;
-  agc?: string; preamp: number; att: number;
+  agc?: string; preamp: number; att: number; antenna: number;
-  nb: boolean; nr: boolean; nr_level: number; narrow: boolean; vox: boolean;
+  nb: boolean; nr: boolean; nr_level: number; narrow: boolean; narrow_supported?: boolean; vox: boolean;
+  max_power?: number;
   split_tx_hz?: number; key_speed?: number; break_in?: boolean; swr?: number; power_w?: number;
 };
 
@@ -26,7 +27,7 @@ const ZERO: YaesuState = {
   available: false, transmitting: false, split: false,
   s_meter: 0, power_meter: 0, swr_meter: 0,
   rf_power: 0, mic_gain: 0, af_gain: 0, rf_gain: 0, squelch: 0,
-  preamp: 0, att: 0, nb: false, nr: false, nr_level: 0, narrow: false, vox: false,
+  preamp: 0, att: 0, antenna: 0, nb: false, nr: false, nr_level: 0, narrow: false, vox: false,
 };
 
 // Band buttons use the rig's OWN band memory (CAT "BS"), not a frequency we
@@ -74,6 +75,10 @@ function activeMode(raw?: string): { id: string; side: 'U' | 'L' } | null {
 // IPO bypasses the preamp entirely (best on a quiet, high-signal band), AMP1 and
 // AMP2 add gain. Presenting it as a toggle would hide the middle position.
 const PREAMPS = [{ v: '0', l: 'IPO' }, { v: '1', l: 'AMP1' }, { v: '2', l: 'AMP2' }];
+// Three jacks is the most any of these rigs has (FTDX101); an FTDX10 answers
+// with 1 or 2 and the third button simply never gets used. A rig with a single
+// socket answers nothing at all and reports 0, and the row is not drawn.
+const ANTENNAS = [{ v: '1', l: 'ANT1' }, { v: '2', l: 'ANT2' }, { v: '3', l: 'ANT3' }];
 const AGCS = [{ v: 'FAST', l: 'FAST' }, { v: 'MID', l: 'MID' }, { v: 'SLOW', l: 'SLOW' }, { v: 'AUTO', l: 'AUTO' }];
 // The attenuator is a three-step pad on these rigs (6/12/18 dB), not a toggle.
 const ATTS = [{ v: '0', l: 'OFF' }, { v: '6', l: '6dB' }, { v: '12', l: '12dB' }, { v: '18', l: '18dB' }];
@@ -424,6 +429,16 @@ export function YaesuPanel({ onReportRST, onKeySpeed }: {
         <Row label="ATT">
           <Segmented value={String(view.att)} options={ATTS} onChange={(v) => push('att', parseInt(v, 10), () => SetYaesuAtt(parseInt(v, 10)))} />
         </Row>
+        {/* Only on a rig that HAS a choice: 0 means the AN command went
+            unanswered, which is what a single-socket FT-891 does. And the
+            choice is remembered for the band it was made on — no table to
+            fill in anywhere, the backend learns it here. */}
+        {view.antenna > 0 && (
+          <Row label="ANT">
+            <Segmented value={String(view.antenna)} options={ANTENNAS}
+              onChange={(v) => push('antenna', parseInt(v, 10), () => SetYaesuAntenna(parseInt(v, 10)))} />
+          </Row>
+        )}
       </Card>
 
       {/* Noise + filter */}
@@ -431,7 +446,13 @@ export function YaesuPanel({ onReportRST, onKeySpeed }: {
         <div className="flex items-center gap-2 flex-wrap">
           <Chip on={view.nb} onClick={() => push('nb', !view.nb, () => SetYaesuNB(!view.nb))} label="NB" />
           <Chip on={view.nr} onClick={() => push('nr', !view.nr, () => SetYaesuNR(!view.nr))} label="DNR" />
-          <Chip on={view.narrow} onClick={() => push('narrow', !view.narrow, () => SetYaesuNarrow(!view.narrow))} label="NAR" />
+          {/* NAR is the narrow IF filter. Shown only when the rig ANSWERED NA:
+              a button that does nothing when pressed reads as a fault in the
+              radio, which is how it was reported from an FTDX101. */}
+          {view.narrow_supported && (
+            <Chip on={view.narrow} onClick={() => push('narrow', !view.narrow, () => SetYaesuNarrow(!view.narrow))}
+              label="NAR" title={t('yaesu.narrowHint')} />
+          )}
         </div>
         <Row label="DNR">
           {/* 1-15 on the rig, shown as-is rather than rescaled to a percentage:
@@ -448,7 +469,7 @@ export function YaesuPanel({ onReportRST, onKeySpeed }: {
         <Row label="PWR">
           {/* Watts, not a percentage: the rig reports and takes watts, and a
               percentage would be a second unit to reconcile every time. */}
-          <Slider value={view.rf_power || 5} min={5} max={100} accent="var(--destructive)"
+          <Slider value={view.rf_power || 5} min={5} max={Math.max(100, view.max_power || 100)} accent="var(--destructive)"
             onChange={(v) => push('rf_power', v, () => SetYaesuPower(v))} />
           <span className="w-10 text-right text-xs font-mono tabular-nums text-muted-foreground">{view.rf_power}W</span>
         </Row>

frontend/src/components/qsl/EditorPanel.tsx

@@ -10,6 +10,7 @@ import {
 } from '@/components/ui/select';
 import { Separator } from '@/components/ui/separator';
 import { cn } from '@/lib/utils';
+import { QSO_BOX_FIELDS, QSO_FIELD_LABELS } from './qslTypes';
 import type { CardTemplate, CardElement, QSOBox, QSLPresetInfo, StyleParams } from './qslTypes';
 import type { CardSelection } from './CardPreview';
 import { StylePresetPicker, NumberField } from './StylePresetPicker';
@@ -199,6 +200,26 @@ export function EditorPanel({ template, sel, presets, fontFamilies, onPatchEleme
               <Input className="h-7 w-44 font-mono text-xs" value={box.title ?? ''}
                 onChange={(ev) => onPatchBox({ title: ev.target.value })} />
             </div>
+            <div className="space-y-1">
+              <Label className="text-xs text-muted-foreground">Columns</Label>
+              {/* Rebuilt from the canonical order every time rather than
+                  appended to: a box whose columns come out in the order they
+                  were ticked reads as a bug, and the widths are tuned for this
+                  order. */}
+              <div className="grid grid-cols-2 gap-x-2">
+                {QSO_BOX_FIELDS.map((f) => (
+                  <label key={f} className="flex items-center gap-1.5 text-xs">
+                    <Checkbox
+                      checked={box.fields.includes(f)}
+                      onCheckedChange={(v) => onPatchBox({
+                        fields: QSO_BOX_FIELDS.filter((k) => (k === f ? v === true : box.fields.includes(k))),
+                      })}
+                    />
+                    {QSO_FIELD_LABELS[f] ?? f}
+                  </label>
+                ))}
+              </div>
+            </div>
             <div className="flex items-center justify-between gap-2">
               <Label className="text-xs text-muted-foreground">Footer</Label>
               <Input className="h-7 w-44 font-mono text-xs" value={box.footer}

frontend/src/components/qsl/QslDesignerModal.tsx

@@ -13,6 +13,7 @@ import { Checkbox } from '@/components/ui/checkbox';
 import { Label } from '@/components/ui/label';
 import {
   QSLPickPhotos, QSLGenerateProposals, QSLListTemplates, QSLGetTemplate,
+  QSLListOtherProfileTemplates, QSLCopyTemplateToActiveProfile,
   QSLSaveTemplate, QSLSetDefaultTemplate, QSLDeleteTemplate, QSLSavePreview,
   QSLPreviewDataURL, QSLResolvePreview, QSLStylePresets,
 } from '../../../wailsjs/go/main/App';
@@ -59,6 +60,7 @@ export function QslDesignerModal({ open, onClose }: Props) {
   const [busy, setBusy] = useState(false);
   const [error, setError] = useState('');
   const [saved, setSaved] = useState<QSLTemplateInfo[]>([]);
+  const [foreign, setForeign] = useState<any[]>([]);
   const [previews, setPreviews] = useState<Record<number, string>>({});
   const [presets, setPresets] = useState<QSLPresetInfo[]>([]);
   const [fontFamilies, setFontFamilies] = useState<string[]>([]);
@@ -88,6 +90,8 @@ export function QslDesignerModal({ open, onClose }: Props) {
         if (url) p[t.id] = url;
       }));
       setPreviews(p);
+      // The designs this profile cannot see, offered for copying.
+      try { setForeign(((await QSLListOtherProfileTemplates()) ?? []) as any[]); } catch { /* nothing to offer */ }
     } catch (e) {
       setError(String(e));
     }
@@ -274,7 +278,29 @@ export function QslDesignerModal({ open, onClose }: Props) {
             </section>
 
             <section className="space-y-2">
+              <div className="flex items-center gap-3">
                 <h3 className="text-sm font-semibold">Saved templates</h3>
+                {/* Designs owned by another profile. A second profile is usually
+                    the same operator with a different rig or locator — same
+                    callsign, same cards — and redrawing one because the antenna
+                    changed is work nobody should have to do. */}
+                {!!foreign.length && (
+                  <select
+                    value=""
+                    onChange={async (e) => {
+                      const id = parseInt(e.target.value, 10);
+                      if (!id) return;
+                      try { await QSLCopyTemplateToActiveProfile(id); await refreshSaved(); }
+                      catch (err) { setError(String(err)); }
+                    }}
+                    className="h-7 rounded-md border border-border bg-background px-2 text-xs">
+                    <option value="">Copy from another profile…</option>
+                    {foreign.map((f) => (
+                      <option key={f.id} value={f.id}>{f.profile_name} — {f.name}</option>
+                    ))}
+                  </select>
+                )}
+              </div>
               {!saved.length && <p className="text-xs text-muted-foreground">None yet.</p>}
               <div className="grid grid-cols-3 gap-3">
                 {saved.map((t) => (

frontend/src/components/qsl/qslTypes.ts

@@ -165,6 +165,12 @@ export interface QSLPresetInfo {
 }
 
 // Human labels for the QSO box fields the renderer knows.
+// QSO_BOX_FIELDS is the canonical COLUMN ORDER of the confirmation box, and
+// the whole list the designer offers. The renderer's column widths are tuned
+// for it, so a box is always rebuilt from this order rather than from the
+// order the operator happened to tick the boxes in.
+export const QSO_BOX_FIELDS = ['qso_date', 'time_on', 'band', 'freq', 'mode', 'submode', 'rst_sent'] as const;
+
 export const QSO_FIELD_LABELS: Record<string, string> = {
   qso_date: 'Date',
   time_on: 'UTC',

frontend/src/components/ui/combobox.tsx

@@ -1,4 +1,5 @@
 import { useEffect, useRef, useState } from 'react';
+import { ChevronDown } from 'lucide-react';
 import { Input } from './input';
 import { cn } from '@/lib/utils';
 
@@ -7,6 +8,7 @@ import { cn } from '@/lib/utils';
 // can't hold a typo'd value that isn't in the list.
 export function Combobox({
   value, onChange, options, placeholder, className, allowFreeText = false, commitOnType = false,
+  showToggle = false,
 }: {
   value: string;
   onChange: (v: string) => void;
@@ -18,9 +20,21 @@ export function Combobox({
   // fields read live by other actions — e.g. RST, so a CW macro sent without
   // leaving the field uses the value just typed.
   commitOnType?: boolean;
+  // Draw a chevron that opens the full list on click.
+  //
+  // Without it this control is indistinguishable from a plain text box: it opens
+  // only on a keystroke or ArrowDown, both of which have to be known about
+  // first. That is fine for a field whose list is a convenience (RST), and wrong
+  // for one whose list is the ANSWER — the COM ports actually present on this
+  // machine, which nobody can be expected to recall.
+  showToggle?: boolean;
 }) {
   const [open, setOpen] = useState(false);
   const [query, setQuery] = useState('');
+  // Opened by the chevron rather than by typing: the whole list is on offer, not
+  // the part matching what is already in the field — a box holding COM7 would
+  // otherwise "open" onto COM7 alone.
+  const [browse, setBrowse] = useState(false);
   const ref = useRef<HTMLDivElement>(null);
 
   useEffect(() => {
@@ -31,20 +45,22 @@ export function Combobox({
     return () => document.removeEventListener('mousedown', onDoc);
   }, []);
 
-  const filtered = open
+  const filtered = !open ? []
-    ? options.filter((o) => o.toLowerCase().includes(query.toLowerCase())).slice(0, 60)
+    : browse ? options.slice(0, 60)
-    : [];
+      : options.filter((o) => o.toLowerCase().includes(query.toLowerCase())).slice(0, 60);
 
   function commit(v: string) {
     onChange(v);
     setQuery(v);
     setOpen(false);
+    setBrowse(false);
   }
 
   function onBlur() {
     // Defer so a click on an option registers first.
     setTimeout(() => {
       setOpen(false);
+      setBrowse(false);
       const trimmed = query.trim();
       const exact = options.find((o) => o.toLowerCase() === trimmed.toLowerCase());
       // Only fire onChange when the value actually changed — committing an
@@ -68,6 +84,7 @@ export function Combobox({
           const v = e.target.value;
           setQuery(v);
           setOpen(true);
+          setBrowse(false); // typing filters again
           // Commit-on-type pushes the value live to the parent (so a CW macro sent
           // without leaving the field uses what was just typed). With free text that's
           // any input; a restricted field (allowFreeText=false) commits ONLY a value
@@ -76,14 +93,34 @@ export function Combobox({
           if (commitOnType && (allowFreeText || options.some((o) => o.toLowerCase() === v.trim().toLowerCase()))) onChange(v);
         }}
         onBlur={onBlur}
+        className={showToggle ? 'pr-7' : undefined}
         onKeyDown={(e) => {
-          if ((e.key === 'ArrowDown' || e.key === 'Alt') && !open) { setOpen(true); }
+          if ((e.key === 'ArrowDown' || e.key === 'Alt') && !open) { setOpen(true); setBrowse(true); }
           else if (e.key === 'Enter' && open && filtered.length > 0) { e.preventDefault(); commit(filtered[0]); }
           else if (e.key === 'Escape') { setQuery(value); setOpen(false); }
           // Tab: just let it move on; onBlur commits/closes. Options are
           // tabIndex=-1 so a single Tab leaves the field.
         }}
       />
+      {showToggle && (
+        <button
+          type="button"
+          tabIndex={-1}
+          aria-label="Show list"
+          className="absolute inset-y-0 right-0 flex w-7 items-center justify-center text-muted-foreground hover:text-foreground"
+          // mousedown, not click: the input's blur fires first otherwise and
+          // closes the list the same instant this opens it.
+          onMouseDown={(e) => {
+            e.preventDefault();
+            if (open) { setOpen(false); setBrowse(false); return; }
+            setQuery(value);
+            setBrowse(true);
+            setOpen(true);
+          }}
+        >
+          <ChevronDown className="size-3.5" />
+        </button>
+      )}
       {open && filtered.length > 0 && (
         <div className="absolute z-50 mt-1 max-h-60 w-full overflow-auto rounded-md border border-border bg-card shadow-lg text-xs">
           {filtered.map((o) => (

frontend/src/lib/autocall.ts

@@ -0,0 +1,221 @@
+// Auto-call: let OpsLog answer a decode without the operator clicking it.
+//
+// WITHDRAWN FROM THE INTERFACE, because DXHunter already does it.
+//
+// Two programs from the same shack deciding on their own to answer the same
+// decode is worse than either doing it alone: they cannot see each other, so
+// they key over one another, and afterwards there is no telling which of them
+// called. The duplicate is the one to remove, and DXHunter is where this lives.
+//
+// There is no switch in Preferences and no button on the decodes toolbar, and
+// App.tsx returns before the loop can run. The file is kept whole: the rules
+// below are the delicate part, argued over and tested, and rewriting them from
+// memory later would be worse than leaving them here. Reinstating the feature
+// means restoring all three — the settings page, the button, and the guard.
+//
+// This KEYS THE TRANSMITTER on its own, which is why the rules here are written
+// as a series of refusals rather than a search for a reason to call. Everything
+// below has to be true; anything unknown means no.
+//
+// The decision is made here, in one pure function, precisely because it is the
+// dangerous part: it can be read, argued with and tested without a radio.
+
+export type AutoCallCriteria = {
+  dxcc: boolean;      // entity never worked
+  bandmode: boolean;  // entity worked, but neither this band nor this mode
+  band: boolean;      // entity never worked on this band
+  mode: boolean;      // entity never worked in this mode
+  slot: boolean;      // band and mode each worked, never together
+  grid: boolean;      // square wanted under the grid scope
+  county: boolean;    // US county never worked
+  pota: boolean;      // park never worked
+  // No SOTA here, though the shape invites it: a decode carries no summit
+  // reference and the backend publishes no "new summit" flag, so a criterion
+  // for it could never be true. It WAS declared, translated and impossible to
+  // tick — a field that lies about what the feature can do.
+  pfx: boolean;       // CQ WPX prefix never worked
+};
+
+export type AutoCallSettings = {
+  enabled: boolean;
+  criteria: AutoCallCriteria;
+  // Callsigns to answer on sight, wildcards allowed (4S7*, */P). Each is still
+  // subject to `watchCriteria` — "call TM0HQ, but only if it is a new band" is
+  // the request, not "call it every time it appears".
+  watch: string[];
+  // Empty means call a watched callsign whenever it is not already worked.
+  watchCriteria: AutoCallCriteria;
+  // Seconds to ignore a callsign after calling it, so a station that keeps
+  // sending CQ is not re-answered every slot while the QSO is in progress.
+  cooldownSec: number;
+};
+
+export const emptyCriteria: AutoCallCriteria = {
+  dxcc: false, bandmode: false, band: false, mode: false, slot: false,
+  grid: false, county: false, pota: false, pfx: false,
+};
+
+export const defaultAutoCall: AutoCallSettings = {
+  // OFF, and it stays off until asked for. Unattended transmit is not something
+  // to inherit from an upgrade.
+  enabled: false,
+  criteria: { ...emptyCriteria },
+  watch: [],
+  watchCriteria: { ...emptyCriteria },
+  cooldownSec: 120,
+};
+
+const AC_KEY = 'opslog.autoCall';
+
+export function loadAutoCall(): AutoCallSettings {
+  try {
+    const raw = localStorage.getItem(AC_KEY);
+    if (!raw) return { ...defaultAutoCall };
+    const v = JSON.parse(raw);
+    const out: AutoCallSettings = {
+      ...defaultAutoCall,
+      ...v,
+      criteria: { ...emptyCriteria, ...(v?.criteria ?? {}) },
+      watchCriteria: { ...emptyCriteria, ...(v?.watchCriteria ?? {}) },
+      watch: Array.isArray(v?.watch) ? v.watch : [],
+    };
+    // DISARMED ON SIGHT, and written back disabled.
+    //
+    // The runtime guard in App.tsx stops this build from calling anyone, but it
+    // leaves "enabled": true sitting in storage, where any build without the
+    // guard — an older one an operator reinstalls, a machine that upgrades
+    // later — reads it and keys the transmitter for a feature with no switch
+    // left to turn off. A withdrawn feature that keys a radio has to be
+    // disarmed where it is REMEMBERED, not only where it runs.
+    if (out.enabled) {
+      out.enabled = false;
+      try { localStorage.setItem(AC_KEY, JSON.stringify(out)); } catch { /* private mode: the guard still holds */ }
+    }
+    return out;
+  } catch { return { ...defaultAutoCall }; }
+}
+
+export const autoCallKey = AC_KEY;
+
+// A decode's resolved novelty, the same shape the panel already renders from.
+export type DecodeStatus = {
+  status?: string;
+  worked_call?: boolean;
+  new_grid?: boolean;
+  grid_state?: string;
+  new_county?: boolean;
+  new_pota?: boolean;
+  new_pfx?: boolean;
+};
+
+// matchesWildcard is the same rule the alert filters use: * is any run, ? is one.
+export function matchesWildcard(pattern: string, call: string): boolean {
+  const p = pattern.trim().toUpperCase();
+  const c = call.trim().toUpperCase();
+  if (!p) return false;
+  const re = new RegExp('^' + p.split('').map((ch) => (
+    ch === '*' ? '.*' : ch === '?' ? '.' : ch.replace(/[.*+?^${}()|[\]\\]/g, '\\$&')
+  )).join('') + '$');
+  return re.test(c);
+}
+
+// anyCriterion is false for an all-off set, which is what makes "watch this
+// callsign, no conditions" expressible.
+function anyCriterion(c: AutoCallCriteria): boolean {
+  return Object.values(c).some(Boolean);
+}
+
+// meets reports whether a decode satisfies at least one ticked criterion.
+function meets(c: AutoCallCriteria, e: DecodeStatus): boolean {
+  if (c.dxcc && e.status === 'new') return true;
+  // Each status is exclusive, so a station that is new on both counts matches
+  // ONLY this criterion — ticking "new band" alone would not catch it, which is
+  // the wrong way round: it is the better catch of the two.
+  if (c.bandmode && e.status === 'new-band-mode') return true;
+  if (c.band && e.status === 'new-band') return true;
+  if (c.mode && e.status === 'new-mode') return true;
+  if (c.slot && e.status === 'new-slot') return true;
+  // A square that is merely UNCONFIRMED is not called: the QSO is already made,
+  // and calling again would work a duplicate to chase a QSL.
+  if (c.grid && e.new_grid && e.grid_state !== 'unconf') return true;
+  if (c.county && e.new_county) return true;
+  if (c.pota && e.new_pota) return true;
+  if (c.pfx && e.new_pfx) return true;
+  return false;
+}
+
+export type AutoCallDecode = {
+  call: string;
+  cq?: boolean;
+  msg?: string;
+  instance?: string;
+};
+
+// shouldAutoCall decides whether to answer one decode. The reason is returned
+// for the log: an automatic transmission with no record of WHY is the thing an
+// operator cannot argue with after the fact.
+export function shouldAutoCall(
+  s: AutoCallSettings,
+  d: AutoCallDecode,
+  e: DecodeStatus | undefined,
+  opts: {
+    // busy is "some receiver is mid-QSO", NOT "this one is transmitting".
+    //
+    // The distinction is the whole bug it fixes: with two instances the caller
+    // used to test a single global transmit flag, which belonged to whichever
+    // receiver reported last. So while slice A worked a station, slice B looked
+    // idle and auto-call started another QSO on it — and the moment either
+    // finished it chained straight into the next. One station at a time means
+    // one across ALL receivers, not one per receiver.
+    busy: boolean;
+    calledAt: Map<string, number>;
+    now: number;
+    myCall?: string;
+  },
+): { call: boolean; reason: string } {
+  const no = (why: string) => ({ call: false, reason: why });
+  if (!s.enabled) return no('off');
+  if (!e) return no('status not resolved yet');
+  const call = (d.call ?? '').trim().toUpperCase();
+  if (!call) return no('no callsign');
+  // Never answer ourselves, however the decode reached us.
+  if (opts.myCall && call === opts.myCall.trim().toUpperCase()) return no('own callsign');
+  // NOT limited to a CQ, deliberately.
+  //
+  // It used to be, on the reasoning that answering a station mid-QSO is calling
+  // over somebody. That reasoning ignored the case the feature exists for: a
+  // DXpedition running a pileup never sends CQ at all — it works caller after
+  // caller — so the rule sat out the one contact auto-call was turned on for. A
+  // new entity on 15 m FT8, decode after decode, and not a single transmission.
+  //
+  // WHEN to transmit is not ours to decide either: the Reply goes to the
+  // decoder, and MSHV starts at once while JTDX waits for a CQ. Two correct
+  // behaviours, both belonging to the program that owns the timing. Here the
+  // question is only whether the station is one the operator wants — the
+  // criteria below answer that, and the cooldown and the busy check keep it from
+  // calling twice.
+  // Not while ANY receiver is mid-QSO — transmitting, or holding a DX call it
+  // has not finished with. Starting a second exchange before the first is done
+  // is what turned this into a machine that called without stopping.
+  if (opts.busy) return no('a QSO is already in progress');
+  const last = opts.calledAt.get(call);
+  if (last !== undefined && opts.now - last < s.cooldownSec * 1000) return no('called recently');
+
+  // The watch list first: an explicitly named station outranks the general
+  // criteria, and may carry conditions of its own.
+  const watched = s.watch.some((p) => matchesWildcard(p, call));
+  if (watched) {
+    if (!anyCriterion(s.watchCriteria)) {
+      // No conditions attached: call it unless it is already worked.
+      return e.worked_call ? no('watched, but already worked') : { call: true, reason: 'watch list' };
+    }
+    return meets(s.watchCriteria, e)
+      ? { call: true, reason: 'watch list + criteria' }
+      : no('watched, but no criterion met');
+  }
+
+  if (!anyCriterion(s.criteria)) return no('no criteria ticked');
+  return meets(s.criteria, e)
+    ? { call: true, reason: 'criteria' }
+    : no('no criterion met');
+}

frontend/src/lib/awardRefs.ts

@@ -154,3 +154,83 @@ export function buildAwardRefs(qso: any, pickable: Array<{ code: string; field:
   }
   return out.join(';');
 }
+
+// COMPUTED_AWARD_FIELDS mirrors isComputedAwardField in app.go: awards whose
+// reference is derived from the callsign and cty.dat, never assigned by hand.
+//
+// State and county are deliberately absent, there as here — an operator sets
+// those themselves and they drive real predefined-list awards (WAS, WAJA, JCC).
+const COMPUTED_AWARD_FIELDS = new Set([
+  'dxcc', 'cqz', 'ituz', 'prefix', 'callsign', 'cont', 'country', 'grid', 'grid4',
+]);
+
+// spotRefList turns a QSO's code→ref map into the strings a DX-cluster comment
+// wants: ["SOTA HA/KM-018"].
+//
+// COMPUTED awards are dropped. A QSO's materialised references hold both kinds,
+// and the derived ones — DXCC, WAC, WAZ, WPX — are exactly what every reader of
+// the spot works out from the callsign anyway. Announcing "WAC EU WAZ 15 WPX HA5"
+// spends the whole 30-character comment saying nothing, and buries the one
+// reference worth chasing. Same rule as the QSO editor, which is why these are
+// the references it lists on the LEFT and not in its read-only panel.
+//
+// fieldOf is award code → scanned field (from GetAwardDefs). A code missing from
+// it is dropped rather than guessed: showing a reference on the air matters more
+// than showing all of them.
+//
+// A code carrying several references (a two-fer park) yields one entry each, so
+// a spot can take the one that fits instead of emitting a truncated pair.
+// Shortest first: when they cannot all fit, more references beat fewer.
+export function spotRefList(byCode: Record<string, string>, fieldOf: Record<string, string>): string[] {
+  const out: string[] = [];
+  for (const [code, refs] of Object.entries(byCode ?? {})) {
+    const field = fieldOf?.[code.toUpperCase()];
+    if (!field || COMPUTED_AWARD_FIELDS.has(field)) continue;
+    for (const ref of String(refs).split(',').map((s) => s.trim()).filter(Boolean)) {
+      out.push(`${code.toUpperCase()} ${ref.toUpperCase()}`);
+    }
+  }
+  return out.sort((a, b) => a.length - b.length || a.localeCompare(b));
+}
+
+// withIOTARef adds an island reference from the callbook to an entry's award
+// references, unless the operator has already set one.
+//
+// QRZ sends <iota> for an operator on an island and OpsLog used to read past it.
+// It matters more here than it would for another award: unlike POTA there is no
+// live "who is on an island right now" feed anywhere, so the callbook record is
+// the practical source — and it is known before the contact is logged, which is
+// when it is useful.
+//
+// A reference the operator typed or picked wins. A callbook entry can be years
+// old, and the operator in front of the radio has just been told where the
+// station is.
+// withRDARef adds a Russian district from the callbook to an entry's award
+// references, on the same terms as the island above.
+//
+// HamQTH publishes the district a station operates from TODAY. That is the
+// right answer for the contact being typed and the wrong one for any other, so
+// this is only ever called on the entry — never on a QSO already in the log.
+// A station can move district; stamping today's on last year's contact turns a
+// correct entry into a false one, and nothing downstream could tell.
+export function withRDARef(awardRefs: string, rda: string): string {
+  const ref = (rda || '').trim().toUpperCase();
+  // Two letters, a hyphen, two digits. Anything else is not a district.
+  if (!/^[A-Z]{2}-\d{2}$/.test(ref)) return awardRefs;
+  const byCode = parseAwardRefs(awardRefs);
+  if ((byCode['RDA'] ?? '').trim() !== '') return awardRefs; // already set: leave it
+  const sep = awardRefs.trim() === '' ? '' : ';';
+  return awardRefs + sep + 'RDA@' + ref;
+}
+
+export function withIOTARef(awardRefs: string, iota: string): string {
+  const ref = (iota || '').trim().toUpperCase();
+  // EU-048: two letters, a hyphen, three digits. Anything else is not an IOTA
+  // reference, and writing it into the award would make a reference that no
+  // list contains — which counts for nothing and has to be found by hand later.
+  if (!/^[A-Z]{2}-\d{3}$/.test(ref)) return awardRefs;
+  const byCode = parseAwardRefs(awardRefs);
+  if ((byCode['IOTA'] ?? '').trim() !== '') return awardRefs; // already set: leave it
+  const sep = awardRefs.trim() === '' ? '' : ';';
+  return awardRefs + sep + 'IOTA@' + ref;
+}

frontend/src/lib/clusterMacros.ts

@@ -0,0 +1,57 @@
+// Cluster command macros — a named button for a command you would otherwise
+// retype.
+//
+// Twelve slots, fixed. A list you can grow needs add/remove/reorder controls and
+// a decision about what an empty row means; twelve boxes you fill in need
+// neither, and nobody has thirteen cluster commands they use daily. A slot with
+// no command is simply not drawn, so the toolbar is as long as the operator made
+// it and no longer.
+//
+// Stored through writeUiPref like every other portable preference, so the
+// buttons travel with data/ rather than living in one browser profile.
+
+import { writeUiPref } from '@/lib/uiPref';
+
+export type ClusterMacro = {
+  label: string; // what the button says
+  cmd: string;   // what is sent to the master server
+};
+
+export const CLUSTER_MACRO_COUNT = 12;
+export const clusterMacrosKey = 'opslog.clusterMacros';
+
+export const emptyClusterMacros = (): ClusterMacro[] =>
+  Array.from({ length: CLUSTER_MACRO_COUNT }, () => ({ label: '', cmd: '' }));
+
+// loadClusterMacros always returns exactly CLUSTER_MACRO_COUNT entries, whatever
+// was stored: a saved list from a build with fewer slots must not leave the
+// editor rendering undefined rows.
+export function loadClusterMacros(): ClusterMacro[] {
+  const out = emptyClusterMacros();
+  try {
+    const raw = localStorage.getItem(clusterMacrosKey);
+    if (!raw) return out;
+    const v = JSON.parse(raw);
+    if (!Array.isArray(v)) return out;
+    for (let i = 0; i < CLUSTER_MACRO_COUNT && i < v.length; i++) {
+      out[i] = {
+        label: String(v[i]?.label ?? '').slice(0, 24),
+        cmd: String(v[i]?.cmd ?? '').slice(0, 120),
+      };
+    }
+  } catch { /* a corrupt preference is not worth failing the panel over */ }
+  return out;
+}
+
+export function saveClusterMacros(macros: ClusterMacro[]): void {
+  writeUiPref(clusterMacrosKey, JSON.stringify(macros));
+}
+
+// visibleClusterMacros drops the slots that would send nothing. The COMMAND is
+// what decides: a slot with a label and no command is a button that lies, and a
+// command with no label still has something to show — its own text.
+export function visibleClusterMacros(macros: ClusterMacro[]): ClusterMacro[] {
+  return macros
+    .filter((m) => m.cmd.trim() !== '')
+    .map((m) => ({ label: m.label.trim() || m.cmd.trim(), cmd: m.cmd.trim() }));
+}

frontend/src/lib/matrixColors.ts

@@ -0,0 +1,66 @@
+// Operator overrides for the band/mode matrix palette.
+//
+// Applied as inline custom properties on <html>, which is what lets them be
+// OVERRIDES rather than a palette: the twelve themes each define their own
+// --mx-* ramp in style.css, an inline value wins over all of them, and removing
+// it hands the colour straight back to the theme. Nothing has to know which
+// theme is active, and switching theme with overrides off is a clean revert.
+
+export type MatrixColors = {
+  enabled: boolean;
+  call_confirmed: string;
+  call_worked: string;
+  entity_confirmed: string;
+  entity_worked: string;
+  not_worked: string;
+  current_entry: string;
+};
+
+// The six settings fields and the CSS custom property each one drives. Also the
+// display order — the same order the legend under the matrix reads in, so the
+// settings panel and the grid can never disagree about which green is which.
+export const MATRIX_VARS: { key: keyof Omit<MatrixColors, 'enabled'>; cssVar: string; label: string }[] = [
+  { key: 'call_confirmed',   cssVar: '--mx-call-conf', label: 'mx.callConf' },
+  { key: 'call_worked',      cssVar: '--mx-call-work', label: 'mx.callWork' },
+  { key: 'entity_confirmed', cssVar: '--mx-dx-conf',   label: 'mx.dxConf' },
+  { key: 'entity_worked',    cssVar: '--mx-dx-work',   label: 'mx.dxWork' },
+  { key: 'not_worked',       cssVar: '--mx-none',      label: 'mx.none' },
+  { key: 'current_entry',    cssVar: '--mx-cur',       label: 'mx.current' },
+];
+
+export const emptyMatrixColors = (): MatrixColors => ({
+  enabled: false,
+  call_confirmed: '', call_worked: '', entity_confirmed: '',
+  entity_worked: '', not_worked: '', current_entry: '',
+});
+
+// applyMatrixColors stamps (or clears) the overrides on <html>. Safe to call as
+// often as you like — it is the whole rendering path, so the settings panel uses
+// it for a live preview and the app uses it once at startup.
+export function applyMatrixColors(c?: MatrixColors | null): void {
+  const root = document.documentElement;
+  for (const { key, cssVar } of MATRIX_VARS) {
+    const v = c?.enabled ? String(c[key] ?? '').trim() : '';
+    if (v) root.style.setProperty(cssVar, v);
+    else root.style.removeProperty(cssVar);
+  }
+}
+
+// effectiveMatrixColor reads what the matrix is ACTUALLY painting right now —
+// the override if there is one, else the active theme's value. It is what seeds
+// the colour pickers, so the operator starts from the colours in front of them
+// instead of from a hardcoded palette that may belong to a different theme.
+//
+// A custom property's computed value has its var() references substituted, so
+// --mx-cur resolves to the theme's --warning rather than to the literal text.
+export function effectiveMatrixColor(cssVar: string): string {
+  try {
+    const v = getComputedStyle(document.documentElement).getPropertyValue(cssVar).trim();
+    // <input type="color"> only accepts #rrggbb. Anything else (a theme that
+    // ever moves to oklch, an empty read during boot) falls back to mid grey
+    // rather than silently resetting the picker to black.
+    return /^#[0-9a-f]{6}$/i.test(v) ? v.toLowerCase() : '#808080';
+  } catch {
+    return '#808080';
+  }
+}

frontend/src/lib/qsl.ts

@@ -0,0 +1,17 @@
+// One answer to "is this QSL received".
+//
+// ADIF's QSL_Rcvd enumeration has BOTH Y and V: Y is "received", V is
+// "verified" — and V is what a LoTW download writes for a confirmation the ARRL
+// has validated. Testing for 'Y' alone therefore misses exactly the
+// confirmations an operator cares most about.
+//
+// It showed on screen: the Awards panel had Morocco validated on five bands
+// while the band/mode matrix beside it showed the entity as merely worked. The
+// award engine accepted Y or V; every other test in the app accepted Y.
+//
+// The Go side has the same rule twice over — award.isYes and qso.ConfirmedValues
+// — and all three have to agree. If you add a value here, add it there.
+export function isQSLConfirmed(v: unknown): boolean {
+  const s = String(v ?? '').trim().toUpperCase();
+  return s === 'Y' || s === 'V';
+}

frontend/src/lib/rotorHeading.ts

@@ -0,0 +1,102 @@
+import { GetRotatorHeading } from '../../wailsjs/go/main/App';
+
+// One poll loop for the antenna heading, shared by everything that shows it.
+//
+// TWO PROBLEMS THIS FIXES, both of them invisible until you count.
+//
+// The status bar polled, and the Station Control compass polled, and they polled
+// the SAME binding — so with that tab open the rotator was asked twice as often
+// as either component believed. Every backend builds a fresh client per call
+// (spid.New, gs232.NewSerial, dcu1.NewSerial, rotgenius.New…), so one poll is
+// one OPEN and CLOSE of a serial port or a TCP connection, not a read on a link
+// already up.
+//
+// And a fixed interval has no good value. Three seconds moved the needle in
+// steps of about thirteen degrees on a turning antenna — a compass that jumps
+// rather than sweeps. Seven hundred milliseconds sweeps beautifully and opens
+// the controller's port about ten thousand times an hour to watch an antenna
+// that has not moved since breakfast.
+//
+// So: fast while it is turning, slow while it is not. "Turning" is not something
+// these controllers report — a SPID answers a position and nothing else — so it
+// is inferred from the position changing, and held for a few seconds after the
+// last change so the tail of a movement stays smooth.
+
+export type RotorHeading = {
+  enabled: boolean; ok: boolean; azimuth: number;
+  rotors?: string[]; active?: number; motorized?: boolean; raw?: string;
+};
+
+const MOVING_MS = 500;   // while the antenna is turning
+const IDLE_MS = 3000;    // while it is parked — the rate everything used before
+const SETTLE_MS = 6000;  // stay fast this long after the last movement
+
+const subs = new Set<(h: RotorHeading) => void>();
+let timer: number | undefined;
+let inFlight = false;
+let lastAz: number | null = null;
+let lastMoveAt = 0;
+// The last heading anyone received, replayed to whoever subscribes next.
+//
+// Without it, opening Station Control left the compass blank for one or two
+// seconds while every other panel filled at once. Nothing was slow: the status
+// bar already had the loop running with a tick pending, so a component mounting
+// halfway through an idle interval simply waited out the rest of it. The
+// heading was known the whole time — it just had nowhere to be read from.
+let last: RotorHeading | null = null;
+
+function schedule(delay: number) {
+  if (timer !== undefined) window.clearTimeout(timer);
+  timer = window.setTimeout(tick, delay);
+}
+
+async function tick() {
+  // A slow controller must not stack requests behind itself: at 600 baud a SPID
+  // reply takes a fifth of a second on the wire alone, and a port that is still
+  // open from the last poll cannot be opened again.
+  if (inFlight) { schedule(MOVING_MS); return; }
+  inFlight = true;
+  try {
+    const h = (await GetRotatorHeading()) as unknown as RotorHeading;
+    if (h?.ok && typeof h.azimuth === 'number') {
+      if (lastAz !== null && h.azimuth !== lastAz) lastMoveAt = Date.now();
+      lastAz = h.azimuth;
+    }
+    last = h;
+    subs.forEach((fn) => { try { fn(h); } catch { /* a subscriber must not stop the loop */ } });
+  } catch {
+    // Leave the last heading alone: a single failed poll on a shared serial port
+    // is not news, and blanking the compass on one would make it flicker.
+  } finally {
+    inFlight = false;
+  }
+  if (subs.size > 0) schedule(Date.now() - lastMoveAt < SETTLE_MS ? MOVING_MS : IDLE_MS);
+  else timer = undefined;
+}
+
+// subscribeRotorHeading starts the loop if it is not running and returns the
+// unsubscribe. The loop stops when the last subscriber leaves.
+export function subscribeRotorHeading(fn: (h: RotorHeading) => void): () => void {
+  subs.add(fn);
+  // Hand over what is already known, at once. An Alpha SPID poll is an open,
+  // a read at 600 baud and a close, so even an immediate one takes a moment —
+  // the cached heading is what makes the compass appear with the panel rather
+  // than after it. In a microtask, so a subscriber is never called back before
+  // subscribeRotorHeading has returned to it.
+  if (last) { const h = last; queueMicrotask(() => { if (subs.has(fn)) fn(h); }); }
+  if (timer === undefined && !inFlight) void tick();
+  return () => {
+    subs.delete(fn);
+    if (subs.size === 0 && timer !== undefined) { window.clearTimeout(timer); timer = undefined; }
+  };
+}
+
+// pokeRotorHeading polls at once and switches to the fast rate — call it after
+// commanding a move, so the needle starts sweeping on the click rather than on
+// whatever was left of a three-second tick.
+export function pokeRotorHeading(): void {
+  lastMoveAt = Date.now();
+  if (timer !== undefined) window.clearTimeout(timer);
+  timer = undefined;
+  void tick();
+}

frontend/src/lib/rowColors.ts

@@ -0,0 +1,147 @@
+import { isQSLConfirmed } from '@/lib/qsl';
+// Row colouring for the log grid, by QSL status.
+//
+// Four categories, each scoped to the channels the operator cares about —
+// paper QSL, LoTW, eQSL, QRZ.com. The rules are ORDERED and the first match
+// wins, because a contact is usually several of them at once.
+
+export type RowColorRule = {
+  id: string;
+  color: string;
+  enabled: boolean;
+  channels?: string[]; // empty = every channel
+};
+export type RowColorSettings = {
+  enabled: boolean;
+  style?: 'bar' | 'tint' | 'both';
+  intensity?: number;
+  bandmap_lotw?: boolean;
+  recent_zebra?: string;        // '' = alternate (default), 'off' = every row alike
+  recent_zebra_color?: string;  // '' = follow the theme
+  rules: RowColorRule[];
+};
+
+// The banding the grid theme applies on its own. Repeated here because turning
+// the option OFF means painting every row explicitly — the theme would
+// otherwise keep striping underneath whatever we do per row.
+const ZEBRA_DEFAULT = 'color-mix(in srgb, var(--muted) 40%, var(--card))';
+
+export const CHANNELS = ['qsl', 'lotw', 'eqsl', 'qrz', 'hamlog'] as const;
+
+// The two QSO fields behind each channel. QRZ.com and Club Log call theirs an
+// "upload status" rather than a QSL flag, but they carry the same Y / R letters.
+const FIELDS: Record<string, { sent: string; rcvd: string }> = {
+  qsl: { sent: 'qsl_sent', rcvd: 'qsl_rcvd' },
+  lotw: { sent: 'lotw_sent', rcvd: 'lotw_rcvd' },
+  eqsl: { sent: 'eqsl_sent', rcvd: 'eqsl_rcvd' },
+  qrz: { sent: 'qrzcom_qso_upload_status', rcvd: 'qrzcom_qso_download_status' },
+};
+
+// HAMLOG.online has no column of its own: the ADIF standard names a field for
+// hamlog.EU and none for hamlog.ONLINE, so its state lives in the extras — see
+// internal/award/award.go, which reads the same keys for award confirmations.
+// One vocabulary, two readers.
+const HAMLOG_SENT = 'APP_OPSLOG_HAMLOG_SENT';
+const HAMLOG_RCVD = ['APP_HAMLOG_QSO_CFM', 'APP_OPSLOG_HAMLOG_QSL', 'APP_HAMLOG_QSL', 'APP_HAMLOGONLINE_QSL', 'HAMLOG_QSL_RCVD'];
+
+// hamlogState reads a row's extras. Any value that is not an explicit "no"
+// counts, because their export could carry a date or a match id rather than Y.
+function hamlogState(q: any, which: 'sent' | 'rcvd'): boolean {
+  const e = (q?.extras ?? {}) as Record<string, string>;
+  const keys = which === 'sent' ? [HAMLOG_SENT] : HAMLOG_RCVD;
+  return keys.some((k) => {
+    const v = String(e[k] ?? '').trim();
+    return v !== '' && v.toUpperCase() !== 'N' && v.toUpperCase() !== 'NO';
+  });
+}
+
+// ADIF QSL fields are single letters. Y is the only one that means "yes";
+// R (requested) and Q (queued) mean it has not gone out yet — a different state,
+// and the one an operator looks for when deciding what to send.
+// Y or V — see lib/qsl. A LoTW-verified contact is confirmed, and colouring it
+// as unconfirmed is the same bug the band/mode matrix had.
+const yes = (v: any) => isQSLConfirmed(v);
+const owed = (v: any) => {
+  const s = String(v ?? '').trim().toUpperCase();
+  return s === 'R' || s === 'Q';
+};
+
+const chansOf = (r: RowColorRule): readonly string[] =>
+  r.channels && r.channels.length ? r.channels : CHANNELS;
+
+function ruleMatches(q: any, r: RowColorRule): boolean {
+  const cs = chansOf(r);
+  switch (r.id) {
+    case 'confirmed':
+      return cs.some((c) => (c === 'hamlog' ? hamlogState(q, 'rcvd') : yes(q[FIELDS[c]?.rcvd])));
+    case 'sent':
+      return cs.some((c) => (c === 'hamlog' ? hamlogState(q, 'sent') : yes(q[FIELDS[c]?.sent])));
+    case 'to_send':
+      // Nothing to request from HAMLOG: a QSO is either uploaded or it is not,
+      // there is no "card asked for" state to be owed.
+      return cs.some((c) => c !== 'hamlog' && owed(q[FIELDS[c]?.sent]));
+    case 'worked':
+      // The catch-all: nothing sent, nothing asked for, nothing back.
+      return !CHANNELS.some((c) => (c === 'hamlog'
+        ? hamlogState(q, 'rcvd') || hamlogState(q, 'sent')
+        : yes(q[FIELDS[c].rcvd]) || yes(q[FIELDS[c].sent]) || owed(q[FIELDS[c].sent])));
+    default:
+      return false;
+  }
+}
+
+// Walks the rules IN ORDER — the order is the priority, and the settings panel
+// shows it numbered so it can be read rather than guessed.
+export function matchRowRule(q: any, cfg: RowColorSettings | null): RowColorRule | null {
+  if (!q || !cfg?.rules) return null;
+  for (const r of cfg.rules) {
+    if (r.enabled && ruleMatches(q, r)) return r;
+  }
+  return null;
+}
+
+// The colour is never a fill by default.
+//
+// A log where nearly every contact has SOME QSL state ends up with every row
+// painted, and colour that is always present stops being information. The
+// default is a stripe down the left edge; a tint is offered at a chosen strength.
+// rowIndex is optional: only the Recent QSOs grid bands its rows, and the other
+// callers have nothing to say about odd and even.
+export function rowStyleFor(q: any, cfg: RowColorSettings | null, rowIndex?: number): Record<string, string> | undefined {
+  const out: Record<string, string> = {};
+  // Banding first, and INDEPENDENT of cfg.enabled: it is legibility, not QSL
+  // status, and an operator who wants plain rows should not have to turn the
+  // status colours off to get them.
+  if (typeof rowIndex === 'number') {
+    if (cfg?.recent_zebra === 'off') {
+      out.backgroundColor = 'var(--card)';
+    } else if (rowIndex % 2 === 1) {
+      out.backgroundColor = cfg?.recent_zebra_color || ZEBRA_DEFAULT;
+    }
+  }
+  const empty = () => (Object.keys(out).length ? out : undefined);
+  if (!cfg?.enabled) return empty();
+  const rule = matchRowRule(q, cfg);
+  if (!rule?.color) return empty();
+
+  const style = cfg.style ?? 'bar';
+  const pct = Math.max(5, Math.min(45, cfg.intensity ?? 12));
+  if (style === 'tint' || style === 'both') {
+    // Overrides the banding on purpose: the QSL colour is information, the
+    // banding is only there to help the eye keep its line.
+    out.backgroundColor = `color-mix(in srgb, ${rule.color} ${pct}%, transparent)`;
+  }
+  if (style === 'bar' || style === 'both') {
+    // A background gradient, not a border and not a shadow.
+    //
+    // A border would shift the cells three pixels on coloured rows only, and
+    // the columns would stop lining up. An inset box-shadow was the first fix
+    // for that and drew the stripe correctly — but on the grid's transformed,
+    // absolutely-positioned rows it also bled a hairline of the same colour
+    // along the row edges, so every coloured row got a horizontal rule it was
+    // never meant to have. A gradient paints inside the box and nothing else:
+    // three pixels of colour, then transparent, and no edge to bleed from.
+    out.backgroundImage = `linear-gradient(to right, ${rule.color} 0, ${rule.color} 3px, transparent 3px)`;
+  }
+  return out;
+}

frontend/src/lib/spotDisplay.ts

@@ -0,0 +1,89 @@
+// Two operator options that change how a spot LOOKS, shared by the DX-cluster
+// list and the band map so the two panels can never disagree about the same
+// spot — the lesson already learnt with the marker colours.
+//
+//   muteWorked    — a station already worked gets no colour and no badge. It
+//                   stays in the list, it simply stops competing for attention.
+//   slotHighlight — a callsign not yet worked on THIS band and mode is coloured,
+//                   whatever the entity says. For an operator filling slots, a
+//                   common entity on a new band+mode is the whole point, and the
+//                   entity-level status calls it "worked".
+//
+// They compose deliberately: mute what is done, light up what is not.
+
+export type SpotDisplayOptions = { muteWorked: boolean; slotHighlight: boolean };
+
+// Both options are withdrawn from the filter panel for now. The machinery below
+// is deliberately kept whole — it is correct and hard-won — so putting the two
+// switches back is this one flag and the block they came from in App.tsx.
+//
+// The saved preferences are left untouched in localStorage rather than cleared:
+// an operator who had either turned on gets them back exactly as they were the
+// day the options return, instead of silently starting from off.
+export const SPOT_DISPLAY_OPTIONS_EXPOSED = false;
+
+export function readSpotDisplayOptions(): SpotDisplayOptions {
+  if (!SPOT_DISPLAY_OPTIONS_EXPOSED) return { muteWorked: false, slotHighlight: false };
+  try {
+    return {
+      muteWorked: localStorage.getItem('opslog.clusterMuteWorked') === '1',
+      slotHighlight: localStorage.getItem('opslog.clusterSlotHighlight') === '1',
+    };
+  } catch {
+    return { muteWorked: false, slotHighlight: false };
+  }
+}
+
+type Entry = {
+  status?: string;
+  worked_call?: boolean;
+  worked_slot?: boolean;
+  new_county?: boolean;
+  new_pota?: boolean;
+  new_pfx?: boolean;
+  new_grid?: boolean;
+} | undefined;
+
+// applySpotDisplay rewrites a status entry per the options, so every consumer —
+// colour, badge, status text — follows from one decision instead of each panel
+// re-deriving it.
+export function applySpotDisplay<T extends Entry>(s: T, o: SpotDisplayOptions): T {
+  if (!s) return s;
+  let e = s;
+
+  // Slot promotion runs first: a callsign not yet worked on this band and mode
+  // is not done, whatever the entity says, so it earns a status before the mute
+  // below can take its colour away.
+  if (o.slotHighlight && e.worked_slot === false && (!e.status || e.status === 'worked')) {
+    e = { ...e, status: 'new-call' } as NonNullable<T>;
+  }
+
+  // Mute drops the blue already-worked-callsign mark, and NOTHING else.
+  //
+  // It used to blank the status as well, on the theory that a spot bringing no
+  // novelty should stop painting entirely. That was wrong twice over. The status
+  // is what the cluster list reads to DIM a row, so blanking it turned every
+  // quiet grey row bright white — the option made the list louder, not quieter.
+  // And an empty status means "entity not resolved" everywhere else, so muted
+  // spots had to carry a flag saying they did not really mean that.
+  //
+  // Leaving the status alone costs nothing: a worked entity already renders with
+  // no colour and gets dimmed, so removing the blue is the entire job.
+  if (o.muteWorked) {
+    e = { ...e, worked_call: false } as NonNullable<T>;
+  }
+  return e;
+}
+
+// spotIsWorked answers "does this spot bring me nothing?", which is what the
+// "hide worked" filter is really asking.
+//
+// The extra markers are ORTHOGONAL to the entity status — a spot can be a worked
+// entity AND a new park, prefix, county or grid — so they win. Without that, a
+// new prefix in an entity worked years ago vanished the moment the filter went
+// on, which is the opposite of what an operator hunting prefixes wants.
+export function spotIsWorked(e: Entry): boolean {
+  if (!e) return false;
+  if (e.new_pota || e.new_county || e.new_pfx || e.new_grid) return false;
+  return !!e.worked_call || e.status === 'worked';
+}

frontend/src/lib/spotMarkers.ts

@@ -0,0 +1,45 @@
+// The "extra" spot markers — the ones ORTHOGONAL to the entity status.
+//
+// A spot's entity status (new DXCC / new band / new slot / worked) answers one
+// question. These answer others that can be true at the same time: the park is
+// new even if the entity is worked, the county is new even if the band is not.
+// Both the DX-cluster list and the band map show them, and they have to agree —
+// the same fact must not be green in one panel and violet in the next, so the
+// colours live HERE and nowhere else. This is also the table a per-marker colour
+// setting will drive, which is why it is a table rather than three constants.
+//
+// Colour choices:
+//   POTA    green   — parks; the association is worth keeping
+//   county  violet  — a chart hue, because every semantic token was already
+//                     spoken for: red, orange and yellow are the entity
+//                     statuses, blue is "callsign worked", green is POTA
+//   worked  blue    — matches the WKD-CALL badge the cluster list has always used
+//   prefix  yellow  — unchanged
+//   grid    magenta — the last hue in the categorical set that is not already
+//                     spoken for here and does not read as a status; a grid is
+//                     never urgent the way a new entity is
+export type SpotMarkerKey = 'new_pota' | 'new_county' | 'new_pfx' | 'worked_call' | 'new_grid';
+
+export type SpotMarker = {
+  key: SpotMarkerKey;
+  colour: string;  // a CSS colour — a var() reference, so it follows the theme
+  labelKey: string; // i18n key, short form (badge / legend)
+};
+
+// Order is the display order, in both panels.
+export const SPOT_MARKERS: SpotMarker[] = [
+  { key: 'new_pota', colour: 'var(--success)', labelKey: 'clg2.newPota' },
+  { key: 'new_county', colour: 'var(--chart-5)', labelKey: 'clg2.newCounty' },
+  { key: 'new_pfx', colour: 'var(--caution)', labelKey: 'clg2.newPfx' },
+  { key: 'new_grid', colour: 'var(--chart-7)', labelKey: 'clg2.newGrid' },
+  { key: 'worked_call', colour: 'var(--info)', labelKey: 'clg2.wkdCall' },
+];
+
+export const markerColour = (key: SpotMarkerKey): string =>
+  SPOT_MARKERS.find((m) => m.key === key)?.colour ?? 'var(--muted-foreground)';
+
+// activeMarkers returns the markers set on a status entry, in display order.
+export function activeMarkers(e: Record<string, unknown> | undefined): SpotMarker[] {
+  if (!e) return [];
+  return SPOT_MARKERS.filter((m) => !!e[m.key]);
+}

frontend/src/lib/textCase.ts

@@ -0,0 +1,28 @@
+// Capitalisation helpers for the free-text QSO fields (Name / QTH / Comment /
+// Note).
+//
+// The same station reaches the log SHOUTED by QRZ, lower-cased by a hurried
+// operator, and in whatever case the other logger stored it in an imported
+// ADIF — so one callsign ends up as "JEAN", "jean" and "Jean" across a log,
+// and sorting or reading a QTH column becomes a mess.
+//
+// Both helpers are meant to run on BLUR, never per keystroke: rewriting the
+// value while the operator is still typing a word fights them mid-word (see
+// the controlled-input note in CLAUDE.md).
+
+// titleCase upper-cases the first letter of every word and lower-cases the
+// rest. Separators are kept, so "SAINT-JULIEN" → "Saint-Julien" and
+// "o'brien" → "O'Brien".
+export function titleCase(s: string): string {
+  return s
+    .toLowerCase()
+    .replace(/(^|[\s\-'’/.])(\p{L})/gu, (_m, sep: string, ch: string) => sep + ch.toUpperCase());
+}
+
+// sentenceCase upper-cases the first letter and leaves everything after it as
+// typed. A comment routinely carries callsigns, modes and abbreviations
+// ("TNX QSO F5ABC, FT8 59") that lower-casing would quietly destroy — which is
+// why this is NOT titleCase.
+export function sentenceCase(s: string): string {
+  return s.replace(/^(\s*)(\p{L})/u, (_m, sp: string, ch: string) => sp + ch.toUpperCase());
+}

frontend/src/lib/theme.tsx

@@ -6,11 +6,16 @@ import { GetUIPref } from '../../wailsjs/go/main/App';
 // CSS variables in style.css key off of. 'auto' follows the OS light/dark
 // preference. The choice is persisted (localStorage + portable UI pref, so it
 // travels with the data/ folder like the language).
-export type ThemeChoice = 'auto' | 'light-warm' | 'light-cool' | 'light-sage' | 'dim-slate' | 'dark-warm' | 'dark-graphite' | 'high-contrast';
+export type ThemeChoice = 'auto' | 'light-warm' | 'light-cool' | 'light-sage' | 'light-nordic' | 'sahara'
+  | 'dim-slate' | 'dark-warm' | 'dark-graphite' | 'dark-indigo' | 'dark-teal' | 'dark-plum' | 'high-contrast';
 
-// Selectable, concrete themes (excludes 'auto') in display order.
+// Selectable, concrete themes (excludes 'auto') in display order: lights first,
+// then darks, with high-contrast last — it is an accessibility choice, not a
+// taste one, and listing it among the moods buries it.
 export const CONCRETE_THEMES: Exclude<ThemeChoice, 'auto'>[] = [
-  'light-warm', 'light-cool', 'light-sage', 'dim-slate', 'dark-warm', 'dark-graphite', 'high-contrast',
+  'light-warm', 'light-cool', 'light-sage', 'light-nordic', 'sahara',
+  'dim-slate', 'dark-warm', 'dark-graphite', 'dark-indigo', 'dark-teal', 'dark-plum',
+  'high-contrast',
 ];
 
 export const LS_KEY = 'opslog.theme';

frontend/src/lib/uiPref.ts

@@ -17,6 +17,9 @@ const PORTABLE_KEYS = [
   'opslog.autofocusWB',   // auto-focus Worked-before
   'hamlog.filterPresets', // Filter Builder saved presets
   'opslog.showRotor',     // rotor compass shown next to the keyers
+  'opslog.rotorCompact',  // rotor widget: dial + SP/LP only, no quick-turn buttons or Stop
+  'opslog.decodesGridMap',// FT decodes tab: grid-square map shown beside the table
+  'opslog.showChaseNew',  // Chase New panel shown next to the keyers
   'opslog.showAmpWidget', // amplifier widget shown next to the keyers
   'opslog.ampSel.widget', // which amplifier that widget shows ("all" or an amp id)
   'opslog.showBeamOnMap', // antenna beam lobe drawn on the Main map
@@ -38,7 +41,19 @@ const PORTABLE_KEYS = [
   'opslog.clusterLockBand', 'opslog.clusterLockMode', 'opslog.clusterStatusFilter',
   'opslog.clusterModeFilter', 'opslog.clusterSearch', 'opslog.clusterHideWorked',
   'opslog.activeTab',     // last selected tab
-  'opslog.mainSplit',    // Main tab: width share of the left pane (percent)
+  'opslog.mainSplit',    // Main tab: width share of the left pane (percent) — legacy, read once to seed mainShares
+  'opslog.mainShares',   // Main tab: column shares per column count, as {2:[..],3:[..],4:[..]}
+  'opslog.mainQuad',     // Main tab: the 2x2 cross, as {col,row} percentages
+  'opslog.clusterMuteWorked',    // cluster/band map: no colour or badge on worked spots
+  'opslog.clusterSlotHighlight', // cluster/band map: colour calls not worked on this band+mode
+  'opslog.bandMapWidth',    // docked band map: column width (px)
+  'opslog.bandMapTabWidth', // Band map tab: shared card width (px)
+  'opslog.bandMapZoom',     // band map zoom (px/kHz step) remembered per band, as one {band: index} map
+  'opslog.decodeColWidths', // FT decodes table: per-column widths (px), as one {col: px} map
+  'opslog.clusterMacros',   // cluster console: the twelve named command buttons
+  'opslog.clusterHideSpots', // cluster console: hide the DX spot flood so replies are readable
+  'opslog.clusterConsoleFollow', // cluster console: keep the view pinned to the newest line
+  'opslog.gridMapColorConfirmed', 'opslog.gridMapColorWorked', // grid map: chosen fills (empty = follow the theme)
   // NOTE: 'hamlog.awardColsShown' and the grid column layouts are NOT listed here.
   // They are handled by lib/gridPrefs, which scopes the localStorage cache PER
   // PROFILE and mirrors to the DB (already per-profile) itself — mirroring them

frontend/src/style.css

@@ -85,6 +85,12 @@
   --mx-dx-conf:   #3730a3;   /* entity confirmed*/
   --mx-dx-work:   #a5b4fc;   /* entity worked   */
   --mx-none:      #e7e5e4;   /* never worked    */
+  /* Ring on the cell the operator is entering. Declared ONCE, on :root, and
+     deliberately not repeated per theme: it follows --warning, which every theme
+     already tunes to its own background. The token exists so the matrix ring can
+     be recoloured on its own without dragging every other warning in the app
+     with it (Appearance → matrix colours). */
+  --mx-cur: var(--warning);
 
   --scrollbar-thumb: #b8a880;
   --scrollbar-thumb-hover: #968455;
@@ -495,6 +501,362 @@
   color-scheme: dark;
 }
 
+/* ---- Theme 5: Indigo — deep blue-violet, electric accent ----------------
+   The first seven themes are all neutral (beige, slate, graphite, black) with an
+   orange accent, so "another dark theme" only ever meant another grey. These
+   four carry a real hue in the SURFACES, not just in the accent, and each takes
+   a different primary — violet, cyan, pink, indigo — so they are told apart at a
+   glance in the picker.
+
+   Every one keeps the same contract: the semantic colours (success / warning /
+   caution / danger / info) must stay recognisable as themselves. A logger is
+   read for hours and "red = a problem" cannot become a decorative choice, so the
+   hue budget is spent on the surfaces and the primary, never on the meanings. */
+[data-theme="dark-indigo"] {
+  --background: #0e0f1f;
+  --foreground: #e4e5f2;
+  --card: #181a30;
+  --card-foreground: #e4e5f2;
+  --popover: #181a30;
+  --popover-foreground: #e4e5f2;
+  --primary: #7c6cff;                /* electric violet */
+  --primary-foreground: #0b0a1a;
+  --secondary: #222542;
+  --secondary-foreground: #e4e5f2;
+  --muted: #1e2038;
+  --muted-foreground: #9d9fbe;
+  --accent: #2a2d51;
+  --accent-foreground: #c7c9ee;
+  --destructive: #f2555a;
+  --destructive-foreground: #12030a;
+  --destructive-muted: #34131c;
+  --destructive-muted-foreground: #fca5a5;
+  --border: #2a2d4c;
+  --input: #2a2d4c;
+  --ring: #9b8dff;
+
+  --success: #34d399;
+  --success-foreground: #052018;
+  --success-muted: #0e2f27;
+  --success-muted-foreground: #6ee7b7;
+  --success-border: #165241;
+
+  --warning: #fbbf24;
+  --warning-foreground: #221803;
+  --warning-muted: #33280f;
+  --warning-muted-foreground: #fcd34d;
+  --warning-border: #4f3e15;
+
+  --caution: #facc15;
+  --caution-foreground: #221e04;
+  --caution-muted: #322d0e;
+  --caution-muted-foreground: #fde047;
+  --caution-border: #4b4315;
+
+  --danger: #fb7185;
+  --danger-foreground: #250912;
+  --danger-muted: #37151f;
+  --danger-muted-foreground: #fda4af;
+  --danger-border: #562533;
+
+  --info: #38bdf8;
+  --info-foreground: #051d29;
+  --info-muted: #0b2a3a;
+  --info-muted-foreground: #7dd3fc;
+  --info-border: #12475c;
+
+  /* The entity ramp moves to CYAN here: violet is the primary, and a violet
+     "entity confirmed" cell would read as a button. */
+  --mx-call-conf: #22c55e;
+  --mx-call-work: #2c7a52;
+  --mx-dx-conf:   #22d3ee;
+  --mx-dx-work:   #1b6b7c;
+  --mx-none:      #2c2f4d;
+
+  --scrollbar-thumb: #383c63;
+  --scrollbar-thumb-hover: #4c5182;
+  --card-shadow: 0 1px 2px rgba(0, 0, 0, 0.5), 0 0 0 1px rgba(228, 229, 242, 0.05);
+  color-scheme: dark;
+}
+
+/* ---- Theme 6: Ocean — deep teal, cyan accent --------------------------- */
+[data-theme="dark-teal"] {
+  --background: #061c21;
+  --foreground: #dcecee;
+  --card: #0d2c33;
+  --card-foreground: #dcecee;
+  --popover: #0d2c33;
+  --popover-foreground: #dcecee;
+  --primary: #22d3ee;                /* cyan */
+  --primary-foreground: #041d24;
+  --secondary: #143b44;
+  --secondary-foreground: #dcecee;
+  --muted: #10333b;
+  --muted-foreground: #92b4ba;
+  --accent: #15424c;
+  --accent-foreground: #a5d8e0;
+  --destructive: #f2555a;
+  --destructive-foreground: #12030a;
+  --destructive-muted: #35161a;
+  --destructive-muted-foreground: #fca5a5;
+  --border: #1a4652;
+  --input: #1a4652;
+  --ring: #5fe3f5;
+
+  --success: #4ade80;
+  --success-foreground: #04220f;
+  --success-muted: #0e3020;
+  --success-muted-foreground: #86efac;
+  --success-border: #17593a;
+
+  --warning: #fbbf24;
+  --warning-foreground: #221803;
+  --warning-muted: #33280f;
+  --warning-muted-foreground: #fcd34d;
+  --warning-border: #4f3e15;
+
+  --caution: #facc15;
+  --caution-foreground: #221e04;
+  --caution-muted: #312d0e;
+  --caution-muted-foreground: #fde047;
+  --caution-border: #4a4315;
+
+  --danger: #fb7185;
+  --danger-foreground: #250912;
+  --danger-muted: #38161f;
+  --danger-muted-foreground: #fda4af;
+  --danger-border: #572634;
+
+  /* Info moves to a BLUE: a cyan "info" would be the primary colour again. */
+  --info: #7aa2f7;
+  --info-foreground: #04122e;
+  --info-muted: #16233f;
+  --info-muted-foreground: #a9c2fb;
+  --info-border: #2b3d66;
+
+  --mx-call-conf: #4ade80;
+  --mx-call-work: #2b7a4d;
+  --mx-dx-conf:   #a78bfa;
+  --mx-dx-work:   #5b4a9c;
+  --mx-none:      #1c4550;
+
+  --scrollbar-thumb: #235a68;
+  --scrollbar-thumb-hover: #31788a;
+  --card-shadow: 0 1px 2px rgba(0, 0, 0, 0.5), 0 0 0 1px rgba(220, 236, 238, 0.05);
+  color-scheme: dark;
+}
+
+/* ---- Theme 7: Plum — aubergine, magenta accent ------------------------- */
+[data-theme="dark-plum"] {
+  --background: #180f1e;
+  --foreground: #eee0f0;
+  --card: #251830;
+  --card-foreground: #eee0f0;
+  --popover: #251830;
+  --popover-foreground: #eee0f0;
+  --primary: #f472b6;                /* magenta-pink */
+  --primary-foreground: #250518;
+  --secondary: #33203f;
+  --secondary-foreground: #eee0f0;
+  --muted: #2b1b36;
+  --muted-foreground: #b39dbd;
+  --accent: #3b2648;
+  --accent-foreground: #dcc2e6;
+  --destructive: #f2555a;
+  --destructive-foreground: #12030a;
+  --destructive-muted: #3a1620;
+  --destructive-muted-foreground: #fca5a5;
+  --border: #3a2547;
+  --input: #3a2547;
+  --ring: #f9a8d4;
+
+  --success: #34d399;
+  --success-foreground: #052018;
+  --success-muted: #10302a;
+  --success-muted-foreground: #6ee7b7;
+  --success-border: #1a5745;
+
+  --warning: #fbbf24;
+  --warning-foreground: #221803;
+  --warning-muted: #352a12;
+  --warning-muted-foreground: #fcd34d;
+  --warning-border: #524019;
+
+  --caution: #facc15;
+  --caution-foreground: #221e04;
+  --caution-muted: #342e12;
+  --caution-muted-foreground: #fde047;
+  --caution-border: #4e4519;
+
+  /* Danger goes RED here, not rose: a rose "danger" beside a pink primary is
+     indistinguishable, and this is the one colour that must never be missed. */
+  --danger: #f43f3f;
+  --danger-foreground: #2a0606;
+  --danger-muted: #3d1418;
+  --danger-muted-foreground: #fca5a5;
+  --danger-border: #5c2128;
+
+  --info: #38bdf8;
+  --info-foreground: #051d29;
+  --info-muted: #0f2b3a;
+  --info-muted-foreground: #7dd3fc;
+  --info-border: #16485d;
+
+  --mx-call-conf: #22c55e;
+  --mx-call-work: #2f7d55;
+  --mx-dx-conf:   #60a5fa;
+  --mx-dx-work:   #35538c;
+  --mx-none:      #3a2647;
+
+  --scrollbar-thumb: #4a3159;
+  --scrollbar-thumb-hover: #644176;
+  --card-shadow: 0 1px 2px rgba(0, 0, 0, 0.5), 0 0 0 1px rgba(238, 224, 240, 0.05);
+  color-scheme: dark;
+}
+
+/* ---- Theme 8: Nordic light — crisp cool white, indigo accent ----------- */
+[data-theme="light-nordic"] {
+  --background: #eef1f7;
+  --foreground: #1b2130;
+  --card: #ffffff;
+  --card-foreground: #1b2130;
+  --popover: #ffffff;
+  --popover-foreground: #1b2130;
+  --primary: #4f46e5;                /* indigo */
+  --primary-foreground: #ffffff;
+  --secondary: #dfe4ee;
+  --secondary-foreground: #1b2130;
+  --muted: #e2e7f0;
+  --muted-foreground: #4a5468;
+  --accent: #dcdcfb;
+  --accent-foreground: #312a91;
+  --destructive: #b91c1c;
+  --destructive-foreground: #ffffff;
+  --destructive-muted: #fef2f2;
+  --destructive-muted-foreground: #b91c1c;
+  --border: #c9d1e0;
+  --input: #c9d1e0;
+  --ring: #6366f1;
+
+  --success: #15803d;
+  --success-foreground: #ffffff;
+  --success-muted: #dcfce7;
+  --success-muted-foreground: #14532d;
+  --success-border: #86efac;
+
+  --warning: #b45309;
+  --warning-foreground: #ffffff;
+  --warning-muted: #fef3c7;
+  --warning-muted-foreground: #92400e;
+  --warning-border: #fcd34d;
+
+  --caution: #a16207;
+  --caution-foreground: #ffffff;
+  --caution-muted: #fef9c3;
+  --caution-muted-foreground: #854d0e;
+  --caution-border: #fde047;
+
+  --danger: #dc2626;
+  --danger-foreground: #ffffff;
+  --danger-muted: #fee2e2;
+  --danger-muted-foreground: #991b1b;
+  --danger-border: #fca5a5;
+
+  --info: #0369a1;
+  --info-foreground: #ffffff;
+  --info-muted: #e0f2fe;
+  --info-muted-foreground: #075985;
+  --info-border: #7dd3fc;
+
+  /* Entity ramp shifts to TEAL: indigo is the primary here. */
+  --mx-call-conf: #15803d;
+  --mx-call-work: #86efac;
+  --mx-dx-conf:   #0f766e;
+  --mx-dx-work:   #99f6e4;
+  --mx-none:      #dde3ec;
+
+  --scrollbar-thumb: #b6c0d2;
+  --scrollbar-thumb-hover: #93a0b8;
+  --card-shadow: 0 1px 2px rgba(27, 33, 48, 0.06), 0 0 0 1px rgba(27, 33, 48, 0.03);
+  color-scheme: light;
+}
+
+/* ---- Theme 1e: Sahara — Warm light, taken a step deeper --------------------
+   Warm light's cream is kept for panels and the entry strip (#faf6eb, the one
+   surface an operator stares at while typing a call), but the page behind them
+   and every toolbar, tab bar and table header go one shade further into the
+   sand. That was the whole request: same family, just a little darker, so the
+   cream panels lift clearly instead of blending into the page.
+   Ink is a deep warm brown rather than black: pure black on sand glares.
+   The accent moves from Warm light's burnt orange to ochre to keep the two
+   themes apart at a glance in the theme picker. ---------------------------- */
+[data-theme="sahara"] {
+  --background: #e6ded0;            /* parchment — the page */
+  --foreground: #3a3227;            /* warm brown-ink */
+  --card: #f3eee2;                  /* panels, entry strip, log rows */
+  --card-foreground: #3a3227;
+  --popover: #f3eee2;
+  --popover-foreground: #3a3227;
+  --primary: #c4501e;               /* terracotta — buttons and the frequency */
+  --primary-foreground: #fdf8f0;
+  --secondary: #ded5c4;
+  --secondary-foreground: #3a3227;
+  --muted: #ded5c4;                 /* toolbars / tab bar / table headers */
+  --muted-foreground: #6a5f4e;      /* readable on both parchments */
+  --accent: #ecd9c0;                /* warm highlight */
+  --accent-foreground: #7a3410;
+  --destructive: #b3401b;
+  --destructive-foreground: #ffffff;
+  --destructive-muted: #f7e4da;
+  --destructive-muted-foreground: #8f3315;
+  --border: #cdc2ae;                /* one step down, so edges read without lines */
+  --input: #cdc2ae;
+  --ring: #c4501e;                  /* the accent, so focus matches the buttons */
+
+  --success: #15803d;
+  --success-foreground: #ffffff;
+  --success-muted: #dcf3e1;
+  --success-muted-foreground: #14532d;
+  --success-border: #86d99f;
+
+  --warning: #b45309;
+  --warning-foreground: #ffffff;
+  --warning-muted: #fbeacd;
+  --warning-muted-foreground: #7c3d05;
+  --warning-border: #e8b96a;
+
+  --caution: #a16207;
+  --caution-foreground: #1c1917;
+  --caution-muted: #f7edcb;
+  --caution-muted-foreground: #713f12;
+  --caution-border: #e0c069;
+
+  --danger: #be123c;
+  --danger-foreground: #ffffff;
+  --danger-muted: #fbe3e8;
+  --danger-muted-foreground: #9f1239;
+  --danger-border: #ee9aac;
+
+  --info: #0369a1;
+  --info-foreground: #ffffff;
+  --info-muted: #e0eef6;
+  --info-muted-foreground: #075985;
+  --info-border: #86c5e4;
+
+  /* Band/mode matrix — the app's blues kept, on a sand neutral so an empty slot
+     recedes into the grid instead of punching a hole in it. */
+  --mx-call-conf: #15803d;
+  --mx-call-work: #7fd6a4;
+  --mx-dx-conf:   #3730a3;
+  --mx-dx-work:   #a5b4fc;
+  --mx-none:      #ded5c4;
+
+  --scrollbar-thumb: #c2b6a0;
+  --scrollbar-thumb-hover: #a5977e;
+  --card-shadow: 0 1px 2px rgba(58, 50, 39, 0.06), 0 0 0 1px rgba(58, 50, 39, 0.03);
+  color-scheme: light;
+}
+
 /* ── Data-viz palette (Statistics dashboard) ────────────────────────────────
    A VALIDATED categorical palette, not hand-picked: the slot ORDER is what makes
    it colour-blind-safe (worst adjacent ΔE 24.2 light / 10.3 dark), so never
@@ -512,7 +874,9 @@
 :root,
 [data-theme="light-warm"],
 [data-theme="light-cool"],
-[data-theme="light-sage"] {
+[data-theme="light-sage"],
+[data-theme="light-nordic"],
+[data-theme="sahara"] {
   --chart-1: #2a78d6; /* blue    — default single-series hue */
   --chart-2: #1baf7a; /* aqua    */
   --chart-3: #eda100; /* yellow  */
@@ -533,7 +897,10 @@
 [data-theme="dim-slate"],
 [data-theme="dark-warm"],
 [data-theme="dark-graphite"],
-[data-theme="high-contrast"] {
+[data-theme="high-contrast"],
+[data-theme="dark-indigo"],
+[data-theme="dark-teal"],
+[data-theme="dark-plum"] {
   --chart-1: #3987e5;
   --chart-2: #199e70;
   --chart-3: #c98500;
@@ -613,6 +980,7 @@
   --color-mx-dx-conf: var(--mx-dx-conf);
   --color-mx-dx-work: var(--mx-dx-work);
   --color-mx-none: var(--mx-none);
+  --color-mx-cur: var(--mx-cur);
 
   --radius: 0.5rem;
 
@@ -623,6 +991,18 @@
 @layer base {
   * { @apply border-border; }
   html, body, #root { height: 100%; }
+  /* No rubber-band, and no swipe-to-navigate.
+
+     Chromium lets a scroll that has reached the end pull the content a few
+     pixels and spring back, and a two-finger horizontal swipe means "go back a
+     page". Both are browser behaviours that have no meaning in a logbook: the
+     first makes a table wobble at the bottom of a list, and the second can
+     navigate the WebView away from the app entirely — a blank window and a
+     restart. Neither shows up with a mouse, which is why they went unnoticed;
+     they arrive with a precision touchpad or a touchscreen.
+
+     A no-op wherever the effects don't occur. */
+  html, body { overscroll-behavior: none; }
   /* Root rem base. Tailwind sizing (text/heights/padding/gaps) is in rem, so
      this is the single global density knob — shrinks the whole UI uniformly
      while Leaflet maps (px-based) stay correct. Default browser base is 16px. */
@@ -681,8 +1061,21 @@
    help. */
    Every temporal input carries the same glyph, so the rule names them all:
    datetime-local was left out at first and its icon stayed invisible. */
-:is([data-theme='dim-slate'], [data-theme='dark-warm'], [data-theme='dark-graphite'], [data-theme='high-contrast'])
+:is([data-theme='dim-slate'], [data-theme='dark-warm'], [data-theme='dark-graphite'], [data-theme='high-contrast'],
+    [data-theme='dark-indigo'], [data-theme='dark-teal'], [data-theme='dark-plum'])
   :is(input[type='date'], input[type='datetime-local'], input[type='time'], input[type='month'], input[type='week'])::-webkit-calendar-picker-indicator {
   filter: invert(1) brightness(1.8);
   opacity: 0.9;
 }
+
+/* Every scrollable pane keeps its overscroll to itself.
+
+   "contain" (not "none") on the inside: the pane still scrolls normally, it
+   simply stops passing the leftover motion up to its parent — which is how
+   scrolling a grid to its end used to tug the panel behind it. */
+.overflow-auto,
+.overflow-y-auto,
+.overflow-x-auto,
+.overflow-scroll {
+  overscroll-behavior: contain;
+}

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.23.3';
+export const APP_VERSION = '0.26.12';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -10,12 +10,16 @@ import {catemu} from '../models';
 import {antgenius} from '../models';
 import {award} from '../models';
 import {awardref} from '../models';
+import {bandopen} from '../models';
 import {cluster} from '../models';
 import {extsvc} from '../models';
 import {powergenius} from '../models';
+import {pskr} from '../models';
+import {psu} from '../models';
 import {spe} from '../models';
 import {solar} from '../models';
 import {tunergenius} from '../models';
+import {webpub} from '../models';
 import {winkeyer} from '../models';
 import {alerts} from '../models';
 import {audio} from '../models';
@@ -49,6 +53,8 @@ export function AmpPower(arg1:string,arg2:boolean):Promise<void>;
 
 export function AmpPowerLevel(arg1:string,arg2:string):Promise<void>;
 
+export function AnswerDecode(arg1:string,arg2:number,arg3:number,arg4:number,arg5:number,arg6:string,arg7:string,arg8:boolean):Promise<void>;
+
 export function AntGeniusActivate(arg1:number,arg2:number):Promise<void>;
 
 export function AntGeniusDeselect(arg1:number):Promise<void>;
@@ -83,10 +89,18 @@ export function AwardMissingQSOs(arg1:string):Promise<Array<qso.QSO>>;
 
 export function AwardRefsForQSOs(arg1:Array<number>):Promise<Record<number, Record<string, string>>>;
 
+export function AwardRefsNew(arg1:Array<string>):Promise<main.AwardRefNewResult>;
+
 export function AwardsFolder():Promise<string>;
 
+export function BackfillDistances():Promise<main.BackfillDistancesResult>;
+
+export function BackfillRDA(arg1:boolean):Promise<main.BackfillRDAResult>;
+
 export function BackfillUSCounties():Promise<main.BackfillUSCountiesResult>;
 
+export function BandSlotQSOs(arg1:string,arg2:number,arg3:string,arg4:string):Promise<Array<qso.QSO>>;
+
 export function BrowseExecutable():Promise<string>;
 
 export function BulkUpdateField(arg1:Array<number>,arg2:string,arg3:string):Promise<number>;
@@ -97,14 +111,26 @@ export function CIVTraceEnabled():Promise<boolean>;
 
 export function CWDecoderRunning():Promise<boolean>;
 
+export function CancelConfirmations():Promise<void>;
+
 export function ChatAvailable():Promise<boolean>;
 
 export function CheckForUpdate():Promise<main.UpdateInfo>;
 
+export function CheckHamlogKey(arg1:string):Promise<string>;
+
+export function ClearKenwoodRIT():Promise<void>;
+
 export function ClearLookupCache():Promise<void>;
 
+export function CloseAutostartPrograms():Promise<void>;
+
 export function ClusterSpotStatuses(arg1:Array<main.SpotQuery>):Promise<Array<main.SpotStatus>>;
 
+export function CompactDatabase(arg1:string):Promise<main.CompactResult>;
+
+export function CompareRDASources():Promise<main.RDACompareResult>;
+
 export function ComputeQSOAwardRefs(arg1:qso.QSO):Promise<Array<main.QSOAwardRef>>;
 
 export function ComputeStationInfo(arg1:string,arg2:string):Promise<main.StationInfoComputed>;
@@ -167,6 +193,8 @@ export function DiscoverFlexRadios():Promise<Array<cat.FlexRadio>>;
 
 export function DismissAwardUpdate(arg1:string):Promise<void>;
 
+export function DismissQSLViaRepair():Promise<void>;
+
 export function DownloadAllReferenceLists():Promise<string>;
 
 export function DownloadAndApplyUpdate(arg1:string):Promise<void>;
@@ -185,6 +213,8 @@ export function DownloadULSCounties():Promise<void>;
 
 export function DuplicateProfile(arg1:number,arg2:string):Promise<profile.Profile>;
 
+export function EntryBandChanged(arg1:string):Promise<void>;
+
 export function ExplainAward(arg1:string,arg2:string):Promise<Array<main.AwardExplain>>;
 
 export function ExportADIF(arg1:string,arg2:boolean,arg3:Array<string>):Promise<adif.ExportResult>;
@@ -205,6 +235,8 @@ export function ExportCabrilloFiltered(arg1:string,arg2:qso.QueryFilter):Promise
 
 export function ExportCabrilloSelected(arg1:string,arg2:Array<number>):Promise<main.CabrilloResult>;
 
+export function ExportHamlogUnmatched(arg1:string):Promise<number>;
+
 export function FilterFields():Promise<Array<string>>;
 
 export function FindDuplicates(arg1:number):Promise<Array<main.DuplicateGroup>>;
@@ -341,8 +373,14 @@ export function FlexSetXITFreq(arg1:number):Promise<void>;
 
 export function FlexStopCW():Promise<void>;
 
+export function FlexTXOnBand(arg1:string):Promise<void>;
+
 export function FlexTune(arg1:boolean):Promise<void>;
 
+export function FlexZoomForSpot(arg1:string,arg2:number):Promise<void>;
+
+export function ForgetYaesuBandAntenna(arg1:string):Promise<void>;
+
 export function GetACOMStatus():Promise<acom.Status>;
 
 export function GetADIFMonitor():Promise<main.ADIFMonitorConfig>;
@@ -381,6 +419,10 @@ export function GetAwards():Promise<Array<award.Result>>;
 
 export function GetBackupSettings():Promise<main.BackupSettings>;
 
+export function GetBandOpenSettings():Promise<main.BandOpenSettings>;
+
+export function GetBandOpenings():Promise<Array<bandopen.Opening>>;
+
 export function GetCATSettings():Promise<main.CATSettings>;
 
 export function GetCATState():Promise<cat.RigState>;
@@ -391,6 +433,12 @@ export function GetCatalogCodes():Promise<Array<string>>;
 
 export function GetChangelog():Promise<Array<main.ChangelogEntry>>;
 
+export function GetChaseNew():Promise<boolean>;
+
+export function GetChaseNewGrids():Promise<boolean>;
+
+export function GetChaseNewSpots():Promise<Array<main.ChaseNewSpot>>;
+
 export function GetChatHistory(arg1:number):Promise<Array<main.ChatMessage>>;
 
 export function GetClublogCtyInfo():Promise<main.ClublogCtyInfo>;
@@ -425,12 +473,30 @@ export function GetFlexBandAntennas():Promise<Record<string, main.FlexBandAnt>>;
 
 export function GetFlexBandPower():Promise<Record<string, main.FlexBandPower>>;
 
+export function GetFlexRSTChase():Promise<main.FlexRSTChase>;
+
 export function GetFlexState():Promise<cat.FlexTXState>;
 
+export function GetFlexZoom():Promise<main.FlexZoomSettings>;
+
+export function GetFolderSync():Promise<main.FolderSyncConfig>;
+
+export function GetFolderSyncStatus():Promise<main.FolderSyncStatus>;
+
+export function GetGridCacheStatus():Promise<main.GridCacheStatus>;
+
+export function GetGridScopeSettings():Promise<main.GridScopeSettings>;
+
 export function GetIcomState():Promise<cat.IcomTXState>;
 
+export function GetKenwoodState():Promise<cat.KenwoodTXState>;
+
+export function GetLinkedAmps():Promise<Array<string>>;
+
 export function GetListsSettings():Promise<main.ListsSettings>;
 
+export function GetLiveOpenings():Promise<Array<bandopen.Opening>>;
+
 export function GetLiveStations():Promise<Array<main.LiveStation>>;
 
 export function GetLoTWUsersStatus():Promise<main.LoTWUsersStatus>;
@@ -443,6 +509,8 @@ export function GetLogbookRevision():Promise<string>;
 
 export function GetLookupSettings():Promise<main.LookupSettings>;
 
+export function GetMatrixColors():Promise<main.MatrixColors>;
+
 export function GetMySQLSettings():Promise<main.MySQLSettings>;
 
 export function GetOfflineStatus():Promise<main.OfflineStatus>;
@@ -457,6 +525,12 @@ export function GetPGXLStatus():Promise<powergenius.Status>;
 
 export function GetPOTAToken():Promise<string>;
 
+export function GetPSKReporterStatus():Promise<pskr.Status>;
+
+export function GetPSUSettings():Promise<main.PSUSettings>;
+
+export function GetPSUStatus():Promise<psu.Status>;
+
 export function GetPendingQSOs():Promise<Array<qso.QSO>>;
 
 export function GetQSLDefaults():Promise<main.QSLDefaults>;
@@ -471,16 +545,28 @@ export function GetRotatorHeading():Promise<main.RotatorHeading>;
 
 export function GetRotators():Promise<Array<main.RotatorDevice>>;
 
+export function GetRotorPresets():Promise<Array<main.RotorPreset>>;
+
+export function GetRowColors():Promise<main.RowColorSettings>;
+
 export function GetSPEStatus():Promise<spe.Status>;
 
 export function GetScpStatus():Promise<main.ScpStatus>;
 
 export function GetSecretStatus():Promise<main.SecretStatus>;
 
+export function GetSelfSpotSettings():Promise<main.SelfSpotSettings>;
+
 export function GetSlotStats():Promise<qso.SlotStats>;
 
 export function GetSolarData():Promise<solar.Data>;
 
+export function GetSpotColors():Promise<main.SpotColors>;
+
+export function GetSpotMax():Promise<number>;
+
+export function GetSpotTTLMinutes():Promise<number>;
+
 export function GetStartupStatus():Promise<main.StartupStatus>;
 
 export function GetStationDevices():Promise<Array<main.StationDevice>>;
@@ -489,8 +575,14 @@ export function GetStationSettings():Promise<main.StationSettings>;
 
 export function GetStationStatus():Promise<Array<main.StationDeviceStatus>>;
 
+export function GetTCIAudioStatus():Promise<cat.TCIAudioStatus>;
+
+export function GetTCIRecordAudio():Promise<boolean>;
+
 export function GetTelemetryEnabled():Promise<boolean>;
 
+export function GetTrackedAwards():Promise<Array<string>>;
+
 export function GetTunerGeniusSettings():Promise<main.TunerGeniusSettings>;
 
 export function GetTunerGeniusStatus():Promise<tunergenius.Status>;
@@ -501,14 +593,26 @@ export function GetUltrabeamSettings():Promise<main.UltrabeamSettings>;
 
 export function GetUltrabeamStatus():Promise<main.UltrabeamStatusInfo>;
 
+export function GetWebPublishConfig():Promise<webpub.Config>;
+
+export function GetWebPublishStatus():Promise<main.WebPublishStatus>;
+
 export function GetWhatsNew():Promise<Array<main.ChangelogEntry>>;
 
 export function GetWinkeyerSettings():Promise<main.WinkeyerSettings>;
 
 export function GetWinkeyerStatus():Promise<winkeyer.Status>;
 
+export function GetWorkedCallVariants():Promise<boolean>;
+
+export function GetYaesuBandAntennas():Promise<Record<string, number>>;
+
 export function GetYaesuState():Promise<cat.YaesuTXState>;
 
+export function GridSquares(arg1:string):Promise<Array<qso.GridSquare>>;
+
+export function HaltDecodeTx(arg1:string,arg2:boolean):Promise<void>;
+
 export function HasBuiltinReferences(arg1:string):Promise<boolean>;
 
 export function IcomRefresh():Promise<void>;
@@ -603,6 +707,8 @@ export function ImportAwardReferencesText(arg1:string,arg2:string):Promise<numbe
 
 export function ImportAwards():Promise<main.AwardImportResult>;
 
+export function ImportHamlogConfirmations(arg1:string):Promise<main.HamlogCfmResult>;
+
 export function InspectAwardImport():Promise<main.AwardImportPreview>;
 
 export function IsNewUSCounty(arg1:string,arg2:string):Promise<boolean>;
@@ -653,14 +759,18 @@ export function LogUDPLoggedADIF(arg1:string):Promise<number>;
 
 export function LogUIError(arg1:string,arg2:string,arg3:string):Promise<void>;
 
-export function LookupCallsign(arg1:string):Promise<lookup.Result>;
+export function LookupCallsign(arg1:string,arg2:string):Promise<lookup.Result>;
 
-export function LookupCallsignFresh(arg1:string):Promise<lookup.Result>;
+export function LookupCallsignFresh(arg1:string,arg2:string):Promise<lookup.Result>;
+
+export function MotorNudgeKHz(arg1:number):Promise<void>;
 
 export function MotorReadElements():Promise<Array<number>>;
 
 export function MotorSetElement(arg1:number,arg2:number):Promise<void>;
 
+export function MotorTuneKHz(arg1:number):Promise<void>;
+
 export function MoveDatabase(arg1:string):Promise<void>;
 
 export function NetActivate(arg1:string):Promise<qso.QSO>;
@@ -721,12 +831,18 @@ export function PickAudioFolder():Promise<string>;
 
 export function PickBackupFolder():Promise<string>;
 
+export function PickFolderSyncFolder():Promise<string>;
+
 export function PickOpenDatabase():Promise<string>;
 
 export function PickSaveDatabase():Promise<string>;
 
 export function PopulateBuiltinReferences(arg1:string):Promise<number>;
 
+export function PublishLogNow():Promise<string>;
+
+export function QSLCopyTemplateToActiveProfile(arg1:number):Promise<number>;
+
 export function QSLDefaultTemplateID():Promise<number>;
 
 export function QSLDeleteTemplate(arg1:number):Promise<void>;
@@ -741,6 +857,8 @@ export function QSLGetEmailTemplates():Promise<main.QSLEmailTemplates>;
 
 export function QSLGetTemplate(arg1:number):Promise<string>;
 
+export function QSLListOtherProfileTemplates():Promise<Array<main.QSLForeignTemplate>>;
+
 export function QSLListTemplates():Promise<Array<main.QSLTemplateInfo>>;
 
 export function QSLPhotoDataURL(arg1:number,arg2:string):Promise<string>;
@@ -761,6 +879,8 @@ export function QSLSetDefaultTemplate(arg1:number):Promise<void>;
 
 export function QSLStylePresets():Promise<Array<main.QSLPresetInfo>>;
 
+export function QSLViaRepairStatus():Promise<main.QSLViaRepairStatus>;
+
 export function QSOAudioBegin():Promise<boolean>;
 
 export function QSOAudioCancel():Promise<void>;
@@ -781,10 +901,18 @@ export function QSOAudioStop():Promise<boolean>;
 
 export function QuitApp():Promise<void>;
 
+export function RDADatabaseCount():Promise<number>;
+
 export function RecomputeAllAwardRefs():Promise<number>;
 
+export function RecomputeAwardRefsForCode(arg1:string):Promise<number>;
+
+export function RecordTCIAudio(arg1:number):Promise<string>;
+
 export function RefreshCtyDat():Promise<main.CtyDatInfo>;
 
+export function RefreshKenwood():Promise<void>;
+
 export function RefreshSolar():Promise<void>;
 
 export function RefreshYaesuPanel():Promise<void>;
@@ -793,12 +921,16 @@ export function ReloadUDPIntegrations():Promise<Array<string>>;
 
 export function RemovePassphrase(arg1:string):Promise<void>;
 
+export function RenameAwardReference(arg1:string,arg2:string,arg3:string):Promise<void>;
+
 export function RenameDatabase(arg1:string):Promise<void>;
 
 export function RenameLogbook(arg1:string):Promise<void>;
 
 export function RenderEQSL(arg1:number,arg2:number):Promise<string>;
 
+export function RepairQSLVia():Promise<main.QSLViaRepairResult>;
+
 export function ReplaceAwardReferences(arg1:string,arg2:Array<awardref.Ref>):Promise<number>;
 
 export function ReportLiveActivity(arg1:number,arg2:string,arg3:string):Promise<void>;
@@ -809,6 +941,10 @@ export function ResetAwardDefs():Promise<Array<award.Def>>;
 
 export function ResetDatabaseToDefault():Promise<void>;
 
+export function ResetRotorPresets():Promise<Array<main.RotorPreset>>;
+
+export function ResetSpotColors():Promise<main.SpotColors>;
+
 export function RestartApp():Promise<void>;
 
 export function RestartQSORecorder():Promise<void>;
@@ -819,6 +955,8 @@ export function RevealDataFolder():Promise<void>;
 
 export function RotatorGoTo(arg1:number,arg2:number):Promise<void>;
 
+export function RotatorGoToPath(arg1:number,arg2:number,arg3:string):Promise<void>;
+
 export function RotatorPark():Promise<void>;
 
 export function RotatorStop():Promise<void>;
@@ -853,6 +991,8 @@ export function SaveAwardReference(arg1:string,arg2:awardref.Ref):Promise<void>;
 
 export function SaveBackupSettings(arg1:main.BackupSettings):Promise<void>;
 
+export function SaveBandOpenSettings(arg1:main.BandOpenSettings):Promise<void>;
+
 export function SaveCATSettings(arg1:main.CATSettings):Promise<void>;
 
 export function SaveCabrilloFile():Promise<string>;
@@ -867,10 +1007,20 @@ export function SaveFlexBandAntennas(arg1:Record<string, main.FlexBandAnt>):Prom
 
 export function SaveFlexBandPower(arg1:Record<string, main.FlexBandPower>):Promise<void>;
 
+export function SaveFlexRSTChase(arg1:main.FlexRSTChase):Promise<void>;
+
+export function SaveFlexZoom(arg1:main.FlexZoomSettings):Promise<void>;
+
+export function SaveFolderSync(arg1:main.FolderSyncConfig):Promise<void>;
+
+export function SaveGridScopeSettings(arg1:main.GridScopeSettings):Promise<void>;
+
 export function SaveListsSettings(arg1:main.ListsSettings):Promise<void>;
 
 export function SaveLookupSettings(arg1:main.LookupSettings):Promise<void>;
 
+export function SaveMatrixColors(arg1:main.MatrixColors):Promise<void>;
+
 export function SaveMySQLSettings(arg1:main.MySQLSettings):Promise<void>;
 
 export function SaveOperatingAntenna(arg1:operating.Antenna):Promise<operating.Antenna>;
@@ -881,6 +1031,8 @@ export function SavePGXLSettings(arg1:main.PGXLSettings):Promise<void>;
 
 export function SavePOTAToken(arg1:string):Promise<void>;
 
+export function SavePSUSettings(arg1:main.PSUSettings):Promise<void>;
+
 export function SaveProfile(arg1:profile.Profile):Promise<profile.Profile>;
 
 export function SaveQSLDefaults(arg1:main.QSLDefaults):Promise<void>;
@@ -889,16 +1041,28 @@ export function SaveRelayAuto(arg1:main.RelayAutoConfig):Promise<void>;
 
 export function SaveRotators(arg1:Array<main.RotatorDevice>):Promise<void>;
 
+export function SaveRotorPresets(arg1:Array<main.RotorPreset>):Promise<void>;
+
+export function SaveRowColors(arg1:main.RowColorSettings):Promise<void>;
+
+export function SaveSelfSpotSettings(arg1:main.SelfSpotSettings):Promise<void>;
+
+export function SaveSpotColors(arg1:main.SpotColors):Promise<void>;
+
 export function SaveStationDevices(arg1:Array<main.StationDevice>):Promise<void>;
 
 export function SaveStationSettings(arg1:main.StationSettings):Promise<void>;
 
+export function SaveTrackedAwards(arg1:Array<string>):Promise<void>;
+
 export function SaveTunerGeniusSettings(arg1:main.TunerGeniusSettings):Promise<void>;
 
 export function SaveUDPIntegration(arg1:udp.Config):Promise<udp.Config>;
 
 export function SaveUltrabeamSettings(arg1:main.UltrabeamSettings):Promise<void>;
 
+export function SaveWebPublishConfig(arg1:webpub.Config):Promise<void>;
+
 export function SaveWinkeyerSettings(arg1:main.WinkeyerSettings):Promise<void>;
 
 export function ScpLookup(arg1:string):Promise<scp.Result>;
@@ -911,6 +1075,8 @@ export function SendClusterCommand(arg1:string):Promise<void>;
 
 export function SendClusterSpot(arg1:string,arg2:number,arg3:string):Promise<void>;
 
+export function SendDecodeFreeText(arg1:string,arg2:string,arg3:boolean):Promise<void>;
+
 export function SendEQSL(arg1:number,arg2:number,arg3:string):Promise<void>;
 
 export function SendLogToDeveloper():Promise<void>;
@@ -929,22 +1095,74 @@ export function SetCIVTrace(arg1:boolean):Promise<void>;
 
 export function SetCWDecoderPitch(arg1:number):Promise<void>;
 
+export function SetChaseNew(arg1:boolean):Promise<void>;
+
+export function SetChaseNewGrids(arg1:boolean):Promise<void>;
+
 export function SetClublogCtyEnabled(arg1:boolean):Promise<void>;
 
 export function SetClublogMostWantedEnabled(arg1:boolean):Promise<void>;
 
 export function SetClusterAutoConnect(arg1:boolean):Promise<void>;
 
+export function SetCompactHeight(arg1:number):Promise<void>;
+
 export function SetCompactMode(arg1:boolean):Promise<void>;
 
 export function SetDVKLabel(arg1:number,arg2:string):Promise<void>;
 
+export function SetFlexRSTChaseEnabled(arg1:boolean):Promise<void>;
+
+export function SetKenwoodAFGain(arg1:number):Promise<void>;
+
+export function SetKenwoodAGC(arg1:string):Promise<void>;
+
+export function SetKenwoodAntenna(arg1:number):Promise<void>;
+
+export function SetKenwoodAtt(arg1:boolean):Promise<void>;
+
+export function SetKenwoodFilter(arg1:number):Promise<void>;
+
 export function SetKenwoodKeySpeed(arg1:number):Promise<void>;
 
+export function SetKenwoodMicGain(arg1:number):Promise<void>;
+
+export function SetKenwoodNB(arg1:boolean):Promise<void>;
+
+export function SetKenwoodNR(arg1:boolean):Promise<void>;
+
+export function SetKenwoodPower(arg1:number):Promise<void>;
+
+export function SetKenwoodPreamp(arg1:boolean):Promise<void>;
+
+export function SetKenwoodRFGain(arg1:number):Promise<void>;
+
+export function SetKenwoodRIT(arg1:boolean):Promise<void>;
+
+export function SetKenwoodSquelch(arg1:number):Promise<void>;
+
+export function SetKenwoodTX(arg1:boolean):Promise<void>;
+
+export function SetKenwoodXIT(arg1:boolean):Promise<void>;
+
+export function SetLinkedAmps(arg1:Array<string>):Promise<void>;
+
+export function SetMotorFollow(arg1:boolean,arg2:number,arg3:string):Promise<void>;
+
+export function SetOpsLogQSLReceived(arg1:number,arg2:boolean):Promise<void>;
+
+export function SetPSUOutput(arg1:boolean):Promise<void>;
+
 export function SetPassphrase(arg1:string):Promise<void>;
 
 export function SetScpEnabled(arg1:boolean):Promise<void>;
 
+export function SetSpotMax(arg1:number):Promise<void>;
+
+export function SetSpotTTLMinutes(arg1:number):Promise<void>;
+
+export function SetTCIRecordAudio(arg1:boolean):Promise<void>;
+
 export function SetTelemetryEnabled(arg1:boolean):Promise<void>;
 
 export function SetUIPref(arg1:string,arg2:string):Promise<void>;
@@ -953,10 +1171,14 @@ export function SetUltrabeamDirection(arg1:number):Promise<void>;
 
 export function SetWinkeyerTrace(arg1:boolean):Promise<void>;
 
+export function SetWorkedCallVariants(arg1:boolean):Promise<void>;
+
 export function SetYaesuAFGain(arg1:number):Promise<void>;
 
 export function SetYaesuAGC(arg1:string):Promise<void>;
 
+export function SetYaesuAntenna(arg1:number):Promise<void>;
+
 export function SetYaesuAtt(arg1:number):Promise<void>;
 
 export function SetYaesuBand(arg1:string):Promise<void>;
@@ -993,12 +1215,18 @@ export function SetYaesuVOX(arg1:boolean):Promise<void>;
 
 export function StartCWDecoder():Promise<void>;
 
+export function StartTCIAudio(arg1:number,arg2:number):Promise<void>;
+
 export function StationSetRelay(arg1:string,arg2:number,arg3:boolean):Promise<void>;
 
 export function StopCWDecoder():Promise<void>;
 
+export function StopTCIAudio():Promise<void>;
+
 export function SwitchCATRig(arg1:number):Promise<void>;
 
+export function SyncFolderNow():Promise<number>;
+
 export function SyncPOTAHunterLog(arg1:boolean,arg2:boolean):Promise<main.POTASyncResult>;
 
 export function TailLogFile(arg1:number):Promise<string>;
@@ -1029,6 +1257,12 @@ export function TestStationDevice(arg1:main.StationDevice):Promise<main.StationT
 
 export function TestUltrabeam(arg1:main.UltrabeamSettings):Promise<void>;
 
+export function TestWebPublishFTP(arg1:webpub.Config):Promise<string>;
+
+export function ToggleKenwoodATU():Promise<void>;
+
+export function TuneKenwoodATU():Promise<void>;
+
 export function TuneYaesuATU():Promise<void>;
 
 export function TunerGeniusActivate(arg1:number):Promise<void>;
@@ -1051,6 +1285,8 @@ export function UpdateAwardReferenceList(arg1:string):Promise<main.AwardRefMeta>
 
 export function UpdateQSO(arg1:qso.QSO):Promise<void>;
 
+export function UpdateQSOsCountyFromULS(arg1:Array<number>):Promise<number>;
+
 export function UpdateQSOsFromClublog(arg1:Array<number>):Promise<number>;
 
 export function UpdateQSOsFromCty(arg1:Array<number>):Promise<number>;
@@ -1061,6 +1297,8 @@ export function UploadCallsign(arg1:string):Promise<string>;
 
 export function UploadQSOsManual(arg1:string,arg2:Array<number>):Promise<void>;
 
+export function WebPublishColumns():Promise<Array<Record<string, string>>>;
+
 export function WinkeyerBackspace():Promise<void>;
 
 export function WinkeyerConnect():Promise<void>;
@@ -1077,6 +1315,8 @@ export function WinkeyerTraceEnabled():Promise<boolean>;
 
 export function WorkedBefore(arg1:string,arg2:number):Promise<qso.WorkedBefore>;
 
+export function YaesuApplyBandAntenna(arg1:string):Promise<void>;
+
 export function YaesuSendCW(arg1:string):Promise<void>;
 
 export function YaesuStopCW():Promise<void>;

frontend/wailsjs/go/main/App.js

@@ -46,6 +46,10 @@ export function AmpPowerLevel(arg1, arg2) {
   return window['go']['main']['App']['AmpPowerLevel'](arg1, arg2);
 }
 
+export function AnswerDecode(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) {
+  return window['go']['main']['App']['AnswerDecode'](arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8);
+}
+
 export function AntGeniusActivate(arg1, arg2) {
   return window['go']['main']['App']['AntGeniusActivate'](arg1, arg2);
 }
@@ -114,14 +118,30 @@ export function AwardRefsForQSOs(arg1) {
   return window['go']['main']['App']['AwardRefsForQSOs'](arg1);
 }
 
+export function AwardRefsNew(arg1) {
+  return window['go']['main']['App']['AwardRefsNew'](arg1);
+}
+
 export function AwardsFolder() {
   return window['go']['main']['App']['AwardsFolder']();
 }
 
+export function BackfillDistances() {
+  return window['go']['main']['App']['BackfillDistances']();
+}
+
+export function BackfillRDA(arg1) {
+  return window['go']['main']['App']['BackfillRDA'](arg1);
+}
+
 export function BackfillUSCounties() {
   return window['go']['main']['App']['BackfillUSCounties']();
 }
 
+export function BandSlotQSOs(arg1, arg2, arg3, arg4) {
+  return window['go']['main']['App']['BandSlotQSOs'](arg1, arg2, arg3, arg4);
+}
+
 export function BrowseExecutable() {
   return window['go']['main']['App']['BrowseExecutable']();
 }
@@ -142,6 +162,10 @@ export function CWDecoderRunning() {
   return window['go']['main']['App']['CWDecoderRunning']();
 }
 
+export function CancelConfirmations() {
+  return window['go']['main']['App']['CancelConfirmations']();
+}
+
 export function ChatAvailable() {
   return window['go']['main']['App']['ChatAvailable']();
 }
@@ -150,14 +174,34 @@ export function CheckForUpdate() {
   return window['go']['main']['App']['CheckForUpdate']();
 }
 
+export function CheckHamlogKey(arg1) {
+  return window['go']['main']['App']['CheckHamlogKey'](arg1);
+}
+
+export function ClearKenwoodRIT() {
+  return window['go']['main']['App']['ClearKenwoodRIT']();
+}
+
 export function ClearLookupCache() {
   return window['go']['main']['App']['ClearLookupCache']();
 }
 
+export function CloseAutostartPrograms() {
+  return window['go']['main']['App']['CloseAutostartPrograms']();
+}
+
 export function ClusterSpotStatuses(arg1) {
   return window['go']['main']['App']['ClusterSpotStatuses'](arg1);
 }
 
+export function CompactDatabase(arg1) {
+  return window['go']['main']['App']['CompactDatabase'](arg1);
+}
+
+export function CompareRDASources() {
+  return window['go']['main']['App']['CompareRDASources']();
+}
+
 export function ComputeQSOAwardRefs(arg1) {
   return window['go']['main']['App']['ComputeQSOAwardRefs'](arg1);
 }
@@ -282,6 +326,10 @@ export function DismissAwardUpdate(arg1) {
   return window['go']['main']['App']['DismissAwardUpdate'](arg1);
 }
 
+export function DismissQSLViaRepair() {
+  return window['go']['main']['App']['DismissQSLViaRepair']();
+}
+
 export function DownloadAllReferenceLists() {
   return window['go']['main']['App']['DownloadAllReferenceLists']();
 }
@@ -318,6 +366,10 @@ export function DuplicateProfile(arg1, arg2) {
   return window['go']['main']['App']['DuplicateProfile'](arg1, arg2);
 }
 
+export function EntryBandChanged(arg1) {
+  return window['go']['main']['App']['EntryBandChanged'](arg1);
+}
+
 export function ExplainAward(arg1, arg2) {
   return window['go']['main']['App']['ExplainAward'](arg1, arg2);
 }
@@ -358,6 +410,10 @@ export function ExportCabrilloSelected(arg1, arg2) {
   return window['go']['main']['App']['ExportCabrilloSelected'](arg1, arg2);
 }
 
+export function ExportHamlogUnmatched(arg1) {
+  return window['go']['main']['App']['ExportHamlogUnmatched'](arg1);
+}
+
 export function FilterFields() {
   return window['go']['main']['App']['FilterFields']();
 }
@@ -630,10 +686,22 @@ export function FlexStopCW() {
   return window['go']['main']['App']['FlexStopCW']();
 }
 
+export function FlexTXOnBand(arg1) {
+  return window['go']['main']['App']['FlexTXOnBand'](arg1);
+}
+
 export function FlexTune(arg1) {
   return window['go']['main']['App']['FlexTune'](arg1);
 }
 
+export function FlexZoomForSpot(arg1, arg2) {
+  return window['go']['main']['App']['FlexZoomForSpot'](arg1, arg2);
+}
+
+export function ForgetYaesuBandAntenna(arg1) {
+  return window['go']['main']['App']['ForgetYaesuBandAntenna'](arg1);
+}
+
 export function GetACOMStatus() {
   return window['go']['main']['App']['GetACOMStatus']();
 }
@@ -710,6 +778,14 @@ export function GetBackupSettings() {
   return window['go']['main']['App']['GetBackupSettings']();
 }
 
+export function GetBandOpenSettings() {
+  return window['go']['main']['App']['GetBandOpenSettings']();
+}
+
+export function GetBandOpenings() {
+  return window['go']['main']['App']['GetBandOpenings']();
+}
+
 export function GetCATSettings() {
   return window['go']['main']['App']['GetCATSettings']();
 }
@@ -730,6 +806,18 @@ export function GetChangelog() {
   return window['go']['main']['App']['GetChangelog']();
 }
 
+export function GetChaseNew() {
+  return window['go']['main']['App']['GetChaseNew']();
+}
+
+export function GetChaseNewGrids() {
+  return window['go']['main']['App']['GetChaseNewGrids']();
+}
+
+export function GetChaseNewSpots() {
+  return window['go']['main']['App']['GetChaseNewSpots']();
+}
+
 export function GetChatHistory(arg1) {
   return window['go']['main']['App']['GetChatHistory'](arg1);
 }
@@ -798,18 +886,54 @@ export function GetFlexBandPower() {
   return window['go']['main']['App']['GetFlexBandPower']();
 }
 
+export function GetFlexRSTChase() {
+  return window['go']['main']['App']['GetFlexRSTChase']();
+}
+
 export function GetFlexState() {
   return window['go']['main']['App']['GetFlexState']();
 }
 
+export function GetFlexZoom() {
+  return window['go']['main']['App']['GetFlexZoom']();
+}
+
+export function GetFolderSync() {
+  return window['go']['main']['App']['GetFolderSync']();
+}
+
+export function GetFolderSyncStatus() {
+  return window['go']['main']['App']['GetFolderSyncStatus']();
+}
+
+export function GetGridCacheStatus() {
+  return window['go']['main']['App']['GetGridCacheStatus']();
+}
+
+export function GetGridScopeSettings() {
+  return window['go']['main']['App']['GetGridScopeSettings']();
+}
+
 export function GetIcomState() {
   return window['go']['main']['App']['GetIcomState']();
 }
 
+export function GetKenwoodState() {
+  return window['go']['main']['App']['GetKenwoodState']();
+}
+
+export function GetLinkedAmps() {
+  return window['go']['main']['App']['GetLinkedAmps']();
+}
+
 export function GetListsSettings() {
   return window['go']['main']['App']['GetListsSettings']();
 }
 
+export function GetLiveOpenings() {
+  return window['go']['main']['App']['GetLiveOpenings']();
+}
+
 export function GetLiveStations() {
   return window['go']['main']['App']['GetLiveStations']();
 }
@@ -834,6 +958,10 @@ export function GetLookupSettings() {
   return window['go']['main']['App']['GetLookupSettings']();
 }
 
+export function GetMatrixColors() {
+  return window['go']['main']['App']['GetMatrixColors']();
+}
+
 export function GetMySQLSettings() {
   return window['go']['main']['App']['GetMySQLSettings']();
 }
@@ -862,6 +990,18 @@ export function GetPOTAToken() {
   return window['go']['main']['App']['GetPOTAToken']();
 }
 
+export function GetPSKReporterStatus() {
+  return window['go']['main']['App']['GetPSKReporterStatus']();
+}
+
+export function GetPSUSettings() {
+  return window['go']['main']['App']['GetPSUSettings']();
+}
+
+export function GetPSUStatus() {
+  return window['go']['main']['App']['GetPSUStatus']();
+}
+
 export function GetPendingQSOs() {
   return window['go']['main']['App']['GetPendingQSOs']();
 }
@@ -890,6 +1030,14 @@ export function GetRotators() {
   return window['go']['main']['App']['GetRotators']();
 }
 
+export function GetRotorPresets() {
+  return window['go']['main']['App']['GetRotorPresets']();
+}
+
+export function GetRowColors() {
+  return window['go']['main']['App']['GetRowColors']();
+}
+
 export function GetSPEStatus() {
   return window['go']['main']['App']['GetSPEStatus']();
 }
@@ -902,6 +1050,10 @@ export function GetSecretStatus() {
   return window['go']['main']['App']['GetSecretStatus']();
 }
 
+export function GetSelfSpotSettings() {
+  return window['go']['main']['App']['GetSelfSpotSettings']();
+}
+
 export function GetSlotStats() {
   return window['go']['main']['App']['GetSlotStats']();
 }
@@ -910,6 +1062,18 @@ export function GetSolarData() {
   return window['go']['main']['App']['GetSolarData']();
 }
 
+export function GetSpotColors() {
+  return window['go']['main']['App']['GetSpotColors']();
+}
+
+export function GetSpotMax() {
+  return window['go']['main']['App']['GetSpotMax']();
+}
+
+export function GetSpotTTLMinutes() {
+  return window['go']['main']['App']['GetSpotTTLMinutes']();
+}
+
 export function GetStartupStatus() {
   return window['go']['main']['App']['GetStartupStatus']();
 }
@@ -926,10 +1090,22 @@ export function GetStationStatus() {
   return window['go']['main']['App']['GetStationStatus']();
 }
 
+export function GetTCIAudioStatus() {
+  return window['go']['main']['App']['GetTCIAudioStatus']();
+}
+
+export function GetTCIRecordAudio() {
+  return window['go']['main']['App']['GetTCIRecordAudio']();
+}
+
 export function GetTelemetryEnabled() {
   return window['go']['main']['App']['GetTelemetryEnabled']();
 }
 
+export function GetTrackedAwards() {
+  return window['go']['main']['App']['GetTrackedAwards']();
+}
+
 export function GetTunerGeniusSettings() {
   return window['go']['main']['App']['GetTunerGeniusSettings']();
 }
@@ -950,6 +1126,14 @@ export function GetUltrabeamStatus() {
   return window['go']['main']['App']['GetUltrabeamStatus']();
 }
 
+export function GetWebPublishConfig() {
+  return window['go']['main']['App']['GetWebPublishConfig']();
+}
+
+export function GetWebPublishStatus() {
+  return window['go']['main']['App']['GetWebPublishStatus']();
+}
+
 export function GetWhatsNew() {
   return window['go']['main']['App']['GetWhatsNew']();
 }
@@ -962,10 +1146,26 @@ export function GetWinkeyerStatus() {
   return window['go']['main']['App']['GetWinkeyerStatus']();
 }
 
+export function GetWorkedCallVariants() {
+  return window['go']['main']['App']['GetWorkedCallVariants']();
+}
+
+export function GetYaesuBandAntennas() {
+  return window['go']['main']['App']['GetYaesuBandAntennas']();
+}
+
 export function GetYaesuState() {
   return window['go']['main']['App']['GetYaesuState']();
 }
 
+export function GridSquares(arg1) {
+  return window['go']['main']['App']['GridSquares'](arg1);
+}
+
+export function HaltDecodeTx(arg1, arg2) {
+  return window['go']['main']['App']['HaltDecodeTx'](arg1, arg2);
+}
+
 export function HasBuiltinReferences(arg1) {
   return window['go']['main']['App']['HasBuiltinReferences'](arg1);
 }
@@ -1154,6 +1354,10 @@ export function ImportAwards() {
   return window['go']['main']['App']['ImportAwards']();
 }
 
+export function ImportHamlogConfirmations(arg1) {
+  return window['go']['main']['App']['ImportHamlogConfirmations'](arg1);
+}
+
 export function InspectAwardImport() {
   return window['go']['main']['App']['InspectAwardImport']();
 }
@@ -1254,12 +1458,16 @@ export function LogUIError(arg1, arg2, arg3) {
   return window['go']['main']['App']['LogUIError'](arg1, arg2, arg3);
 }
 
-export function LookupCallsign(arg1) {
+export function LookupCallsign(arg1, arg2) {
-  return window['go']['main']['App']['LookupCallsign'](arg1);
+  return window['go']['main']['App']['LookupCallsign'](arg1, arg2);
 }
 
-export function LookupCallsignFresh(arg1) {
+export function LookupCallsignFresh(arg1, arg2) {
-  return window['go']['main']['App']['LookupCallsignFresh'](arg1);
+  return window['go']['main']['App']['LookupCallsignFresh'](arg1, arg2);
+}
+
+export function MotorNudgeKHz(arg1) {
+  return window['go']['main']['App']['MotorNudgeKHz'](arg1);
 }
 
 export function MotorReadElements() {
@@ -1270,6 +1478,10 @@ export function MotorSetElement(arg1, arg2) {
   return window['go']['main']['App']['MotorSetElement'](arg1, arg2);
 }
 
+export function MotorTuneKHz(arg1) {
+  return window['go']['main']['App']['MotorTuneKHz'](arg1);
+}
+
 export function MoveDatabase(arg1) {
   return window['go']['main']['App']['MoveDatabase'](arg1);
 }
@@ -1390,6 +1602,10 @@ export function PickBackupFolder() {
   return window['go']['main']['App']['PickBackupFolder']();
 }
 
+export function PickFolderSyncFolder() {
+  return window['go']['main']['App']['PickFolderSyncFolder']();
+}
+
 export function PickOpenDatabase() {
   return window['go']['main']['App']['PickOpenDatabase']();
 }
@@ -1402,6 +1618,14 @@ export function PopulateBuiltinReferences(arg1) {
   return window['go']['main']['App']['PopulateBuiltinReferences'](arg1);
 }
 
+export function PublishLogNow() {
+  return window['go']['main']['App']['PublishLogNow']();
+}
+
+export function QSLCopyTemplateToActiveProfile(arg1) {
+  return window['go']['main']['App']['QSLCopyTemplateToActiveProfile'](arg1);
+}
+
 export function QSLDefaultTemplateID() {
   return window['go']['main']['App']['QSLDefaultTemplateID']();
 }
@@ -1430,6 +1654,10 @@ export function QSLGetTemplate(arg1) {
   return window['go']['main']['App']['QSLGetTemplate'](arg1);
 }
 
+export function QSLListOtherProfileTemplates() {
+  return window['go']['main']['App']['QSLListOtherProfileTemplates']();
+}
+
 export function QSLListTemplates() {
   return window['go']['main']['App']['QSLListTemplates']();
 }
@@ -1470,6 +1698,10 @@ export function QSLStylePresets() {
   return window['go']['main']['App']['QSLStylePresets']();
 }
 
+export function QSLViaRepairStatus() {
+  return window['go']['main']['App']['QSLViaRepairStatus']();
+}
+
 export function QSOAudioBegin() {
   return window['go']['main']['App']['QSOAudioBegin']();
 }
@@ -1510,14 +1742,30 @@ export function QuitApp() {
   return window['go']['main']['App']['QuitApp']();
 }
 
+export function RDADatabaseCount() {
+  return window['go']['main']['App']['RDADatabaseCount']();
+}
+
 export function RecomputeAllAwardRefs() {
   return window['go']['main']['App']['RecomputeAllAwardRefs']();
 }
 
+export function RecomputeAwardRefsForCode(arg1) {
+  return window['go']['main']['App']['RecomputeAwardRefsForCode'](arg1);
+}
+
+export function RecordTCIAudio(arg1) {
+  return window['go']['main']['App']['RecordTCIAudio'](arg1);
+}
+
 export function RefreshCtyDat() {
   return window['go']['main']['App']['RefreshCtyDat']();
 }
 
+export function RefreshKenwood() {
+  return window['go']['main']['App']['RefreshKenwood']();
+}
+
 export function RefreshSolar() {
   return window['go']['main']['App']['RefreshSolar']();
 }
@@ -1534,6 +1782,10 @@ export function RemovePassphrase(arg1) {
   return window['go']['main']['App']['RemovePassphrase'](arg1);
 }
 
+export function RenameAwardReference(arg1, arg2, arg3) {
+  return window['go']['main']['App']['RenameAwardReference'](arg1, arg2, arg3);
+}
+
 export function RenameDatabase(arg1) {
   return window['go']['main']['App']['RenameDatabase'](arg1);
 }
@@ -1546,6 +1798,10 @@ export function RenderEQSL(arg1, arg2) {
   return window['go']['main']['App']['RenderEQSL'](arg1, arg2);
 }
 
+export function RepairQSLVia() {
+  return window['go']['main']['App']['RepairQSLVia']();
+}
+
 export function ReplaceAwardReferences(arg1, arg2) {
   return window['go']['main']['App']['ReplaceAwardReferences'](arg1, arg2);
 }
@@ -1566,6 +1822,14 @@ export function ResetDatabaseToDefault() {
   return window['go']['main']['App']['ResetDatabaseToDefault']();
 }
 
+export function ResetRotorPresets() {
+  return window['go']['main']['App']['ResetRotorPresets']();
+}
+
+export function ResetSpotColors() {
+  return window['go']['main']['App']['ResetSpotColors']();
+}
+
 export function RestartApp() {
   return window['go']['main']['App']['RestartApp']();
 }
@@ -1586,6 +1850,10 @@ export function RotatorGoTo(arg1, arg2) {
   return window['go']['main']['App']['RotatorGoTo'](arg1, arg2);
 }
 
+export function RotatorGoToPath(arg1, arg2, arg3) {
+  return window['go']['main']['App']['RotatorGoToPath'](arg1, arg2, arg3);
+}
+
 export function RotatorPark() {
   return window['go']['main']['App']['RotatorPark']();
 }
@@ -1654,6 +1922,10 @@ export function SaveBackupSettings(arg1) {
   return window['go']['main']['App']['SaveBackupSettings'](arg1);
 }
 
+export function SaveBandOpenSettings(arg1) {
+  return window['go']['main']['App']['SaveBandOpenSettings'](arg1);
+}
+
 export function SaveCATSettings(arg1) {
   return window['go']['main']['App']['SaveCATSettings'](arg1);
 }
@@ -1682,6 +1954,22 @@ export function SaveFlexBandPower(arg1) {
   return window['go']['main']['App']['SaveFlexBandPower'](arg1);
 }
 
+export function SaveFlexRSTChase(arg1) {
+  return window['go']['main']['App']['SaveFlexRSTChase'](arg1);
+}
+
+export function SaveFlexZoom(arg1) {
+  return window['go']['main']['App']['SaveFlexZoom'](arg1);
+}
+
+export function SaveFolderSync(arg1) {
+  return window['go']['main']['App']['SaveFolderSync'](arg1);
+}
+
+export function SaveGridScopeSettings(arg1) {
+  return window['go']['main']['App']['SaveGridScopeSettings'](arg1);
+}
+
 export function SaveListsSettings(arg1) {
   return window['go']['main']['App']['SaveListsSettings'](arg1);
 }
@@ -1690,6 +1978,10 @@ export function SaveLookupSettings(arg1) {
   return window['go']['main']['App']['SaveLookupSettings'](arg1);
 }
 
+export function SaveMatrixColors(arg1) {
+  return window['go']['main']['App']['SaveMatrixColors'](arg1);
+}
+
 export function SaveMySQLSettings(arg1) {
   return window['go']['main']['App']['SaveMySQLSettings'](arg1);
 }
@@ -1710,6 +2002,10 @@ export function SavePOTAToken(arg1) {
   return window['go']['main']['App']['SavePOTAToken'](arg1);
 }
 
+export function SavePSUSettings(arg1) {
+  return window['go']['main']['App']['SavePSUSettings'](arg1);
+}
+
 export function SaveProfile(arg1) {
   return window['go']['main']['App']['SaveProfile'](arg1);
 }
@@ -1726,6 +2022,22 @@ export function SaveRotators(arg1) {
   return window['go']['main']['App']['SaveRotators'](arg1);
 }
 
+export function SaveRotorPresets(arg1) {
+  return window['go']['main']['App']['SaveRotorPresets'](arg1);
+}
+
+export function SaveRowColors(arg1) {
+  return window['go']['main']['App']['SaveRowColors'](arg1);
+}
+
+export function SaveSelfSpotSettings(arg1) {
+  return window['go']['main']['App']['SaveSelfSpotSettings'](arg1);
+}
+
+export function SaveSpotColors(arg1) {
+  return window['go']['main']['App']['SaveSpotColors'](arg1);
+}
+
 export function SaveStationDevices(arg1) {
   return window['go']['main']['App']['SaveStationDevices'](arg1);
 }
@@ -1734,6 +2046,10 @@ export function SaveStationSettings(arg1) {
   return window['go']['main']['App']['SaveStationSettings'](arg1);
 }
 
+export function SaveTrackedAwards(arg1) {
+  return window['go']['main']['App']['SaveTrackedAwards'](arg1);
+}
+
 export function SaveTunerGeniusSettings(arg1) {
   return window['go']['main']['App']['SaveTunerGeniusSettings'](arg1);
 }
@@ -1746,6 +2062,10 @@ export function SaveUltrabeamSettings(arg1) {
   return window['go']['main']['App']['SaveUltrabeamSettings'](arg1);
 }
 
+export function SaveWebPublishConfig(arg1) {
+  return window['go']['main']['App']['SaveWebPublishConfig'](arg1);
+}
+
 export function SaveWinkeyerSettings(arg1) {
   return window['go']['main']['App']['SaveWinkeyerSettings'](arg1);
 }
@@ -1770,6 +2090,10 @@ export function SendClusterSpot(arg1, arg2, arg3) {
   return window['go']['main']['App']['SendClusterSpot'](arg1, arg2, arg3);
 }
 
+export function SendDecodeFreeText(arg1, arg2, arg3) {
+  return window['go']['main']['App']['SendDecodeFreeText'](arg1, arg2, arg3);
+}
+
 export function SendEQSL(arg1, arg2, arg3) {
   return window['go']['main']['App']['SendEQSL'](arg1, arg2, arg3);
 }
@@ -1806,6 +2130,14 @@ export function SetCWDecoderPitch(arg1) {
   return window['go']['main']['App']['SetCWDecoderPitch'](arg1);
 }
 
+export function SetChaseNew(arg1) {
+  return window['go']['main']['App']['SetChaseNew'](arg1);
+}
+
+export function SetChaseNewGrids(arg1) {
+  return window['go']['main']['App']['SetChaseNewGrids'](arg1);
+}
+
 export function SetClublogCtyEnabled(arg1) {
   return window['go']['main']['App']['SetClublogCtyEnabled'](arg1);
 }
@@ -1818,6 +2150,10 @@ export function SetClusterAutoConnect(arg1) {
   return window['go']['main']['App']['SetClusterAutoConnect'](arg1);
 }
 
+export function SetCompactHeight(arg1) {
+  return window['go']['main']['App']['SetCompactHeight'](arg1);
+}
+
 export function SetCompactMode(arg1) {
   return window['go']['main']['App']['SetCompactMode'](arg1);
 }
@@ -1826,10 +2162,90 @@ export function SetDVKLabel(arg1, arg2) {
   return window['go']['main']['App']['SetDVKLabel'](arg1, arg2);
 }
 
+export function SetFlexRSTChaseEnabled(arg1) {
+  return window['go']['main']['App']['SetFlexRSTChaseEnabled'](arg1);
+}
+
+export function SetKenwoodAFGain(arg1) {
+  return window['go']['main']['App']['SetKenwoodAFGain'](arg1);
+}
+
+export function SetKenwoodAGC(arg1) {
+  return window['go']['main']['App']['SetKenwoodAGC'](arg1);
+}
+
+export function SetKenwoodAntenna(arg1) {
+  return window['go']['main']['App']['SetKenwoodAntenna'](arg1);
+}
+
+export function SetKenwoodAtt(arg1) {
+  return window['go']['main']['App']['SetKenwoodAtt'](arg1);
+}
+
+export function SetKenwoodFilter(arg1) {
+  return window['go']['main']['App']['SetKenwoodFilter'](arg1);
+}
+
 export function SetKenwoodKeySpeed(arg1) {
   return window['go']['main']['App']['SetKenwoodKeySpeed'](arg1);
 }
 
+export function SetKenwoodMicGain(arg1) {
+  return window['go']['main']['App']['SetKenwoodMicGain'](arg1);
+}
+
+export function SetKenwoodNB(arg1) {
+  return window['go']['main']['App']['SetKenwoodNB'](arg1);
+}
+
+export function SetKenwoodNR(arg1) {
+  return window['go']['main']['App']['SetKenwoodNR'](arg1);
+}
+
+export function SetKenwoodPower(arg1) {
+  return window['go']['main']['App']['SetKenwoodPower'](arg1);
+}
+
+export function SetKenwoodPreamp(arg1) {
+  return window['go']['main']['App']['SetKenwoodPreamp'](arg1);
+}
+
+export function SetKenwoodRFGain(arg1) {
+  return window['go']['main']['App']['SetKenwoodRFGain'](arg1);
+}
+
+export function SetKenwoodRIT(arg1) {
+  return window['go']['main']['App']['SetKenwoodRIT'](arg1);
+}
+
+export function SetKenwoodSquelch(arg1) {
+  return window['go']['main']['App']['SetKenwoodSquelch'](arg1);
+}
+
+export function SetKenwoodTX(arg1) {
+  return window['go']['main']['App']['SetKenwoodTX'](arg1);
+}
+
+export function SetKenwoodXIT(arg1) {
+  return window['go']['main']['App']['SetKenwoodXIT'](arg1);
+}
+
+export function SetLinkedAmps(arg1) {
+  return window['go']['main']['App']['SetLinkedAmps'](arg1);
+}
+
+export function SetMotorFollow(arg1, arg2, arg3) {
+  return window['go']['main']['App']['SetMotorFollow'](arg1, arg2, arg3);
+}
+
+export function SetOpsLogQSLReceived(arg1, arg2) {
+  return window['go']['main']['App']['SetOpsLogQSLReceived'](arg1, arg2);
+}
+
+export function SetPSUOutput(arg1) {
+  return window['go']['main']['App']['SetPSUOutput'](arg1);
+}
+
 export function SetPassphrase(arg1) {
   return window['go']['main']['App']['SetPassphrase'](arg1);
 }
@@ -1838,6 +2254,18 @@ export function SetScpEnabled(arg1) {
   return window['go']['main']['App']['SetScpEnabled'](arg1);
 }
 
+export function SetSpotMax(arg1) {
+  return window['go']['main']['App']['SetSpotMax'](arg1);
+}
+
+export function SetSpotTTLMinutes(arg1) {
+  return window['go']['main']['App']['SetSpotTTLMinutes'](arg1);
+}
+
+export function SetTCIRecordAudio(arg1) {
+  return window['go']['main']['App']['SetTCIRecordAudio'](arg1);
+}
+
 export function SetTelemetryEnabled(arg1) {
   return window['go']['main']['App']['SetTelemetryEnabled'](arg1);
 }
@@ -1854,6 +2282,10 @@ export function SetWinkeyerTrace(arg1) {
   return window['go']['main']['App']['SetWinkeyerTrace'](arg1);
 }
 
+export function SetWorkedCallVariants(arg1) {
+  return window['go']['main']['App']['SetWorkedCallVariants'](arg1);
+}
+
 export function SetYaesuAFGain(arg1) {
   return window['go']['main']['App']['SetYaesuAFGain'](arg1);
 }
@@ -1862,6 +2294,10 @@ export function SetYaesuAGC(arg1) {
   return window['go']['main']['App']['SetYaesuAGC'](arg1);
 }
 
+export function SetYaesuAntenna(arg1) {
+  return window['go']['main']['App']['SetYaesuAntenna'](arg1);
+}
+
 export function SetYaesuAtt(arg1) {
   return window['go']['main']['App']['SetYaesuAtt'](arg1);
 }
@@ -1934,6 +2370,10 @@ export function StartCWDecoder() {
   return window['go']['main']['App']['StartCWDecoder']();
 }
 
+export function StartTCIAudio(arg1, arg2) {
+  return window['go']['main']['App']['StartTCIAudio'](arg1, arg2);
+}
+
 export function StationSetRelay(arg1, arg2, arg3) {
   return window['go']['main']['App']['StationSetRelay'](arg1, arg2, arg3);
 }
@@ -1942,10 +2382,18 @@ export function StopCWDecoder() {
   return window['go']['main']['App']['StopCWDecoder']();
 }
 
+export function StopTCIAudio() {
+  return window['go']['main']['App']['StopTCIAudio']();
+}
+
 export function SwitchCATRig(arg1) {
   return window['go']['main']['App']['SwitchCATRig'](arg1);
 }
 
+export function SyncFolderNow() {
+  return window['go']['main']['App']['SyncFolderNow']();
+}
+
 export function SyncPOTAHunterLog(arg1, arg2) {
   return window['go']['main']['App']['SyncPOTAHunterLog'](arg1, arg2);
 }
@@ -2006,6 +2454,18 @@ export function TestUltrabeam(arg1) {
   return window['go']['main']['App']['TestUltrabeam'](arg1);
 }
 
+export function TestWebPublishFTP(arg1) {
+  return window['go']['main']['App']['TestWebPublishFTP'](arg1);
+}
+
+export function ToggleKenwoodATU() {
+  return window['go']['main']['App']['ToggleKenwoodATU']();
+}
+
+export function TuneKenwoodATU() {
+  return window['go']['main']['App']['TuneKenwoodATU']();
+}
+
 export function TuneYaesuATU() {
   return window['go']['main']['App']['TuneYaesuATU']();
 }
@@ -2050,6 +2510,10 @@ export function UpdateQSO(arg1) {
   return window['go']['main']['App']['UpdateQSO'](arg1);
 }
 
+export function UpdateQSOsCountyFromULS(arg1) {
+  return window['go']['main']['App']['UpdateQSOsCountyFromULS'](arg1);
+}
+
 export function UpdateQSOsFromClublog(arg1) {
   return window['go']['main']['App']['UpdateQSOsFromClublog'](arg1);
 }
@@ -2070,6 +2534,10 @@ export function UploadQSOsManual(arg1, arg2) {
   return window['go']['main']['App']['UploadQSOsManual'](arg1, arg2);
 }
 
+export function WebPublishColumns() {
+  return window['go']['main']['App']['WebPublishColumns']();
+}
+
 export function WinkeyerBackspace() {
   return window['go']['main']['App']['WinkeyerBackspace']();
 }
@@ -2102,6 +2570,10 @@ export function WorkedBefore(arg1, arg2) {
   return window['go']['main']['App']['WorkedBefore'](arg1, arg2);
 }
 
+export function YaesuApplyBandAntenna(arg1) {
+  return window['go']['main']['App']['YaesuApplyBandAntenna'](arg1);
+}
+
 export function YaesuSendCW(arg1) {
   return window['go']['main']['App']['YaesuSendCW'](arg1);
 }